iio:dac:ad5686: Add AD5681R/AD5682R/AD5683/AD5683R support

The AD5681R/AD5682R/AD5683/AD5683R are a family of one channel DACs with
12-bit, 14-bit and 16-bit precision respectively. The devices have either
no built-in reference, or built-in 2.5V reference.

These devices are similar to AD5691R/AD5692R/AD5693/AD5693R except
with a few notable differences:
 * they use the SPI interface instead of I2C
 * in the write control register, DB18 and DB17 are used for setting the
   power mode, while DB16 is the REF bit. This is why a new regmap type
   was defined and checked accordingly.
 * the shift register is 24 bits wide, the first four bits are the command
   bits followed by the data bits. As the data comprises of 20-bit, 18-bit
   or 16-bit input code, this means that 4 LSB bits are don't care. This is
   why the data needs to be shifted on the left with four bits. Therefore,
   AD5683_REGMAP is checked inside a switch case in the ad5686_spi_write()
   function. On the other hand, similar devices such as AD5693R family,
   have the 4 MSB command bits followed by 4 don't care bits.

Datasheet:
http://www.analog.com/media/en/technical-documentation/data-sheets/AD5683R_5682R_5681R_5683.pdf

Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

drivers/iio/dac/ad5686-spi.c

@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
- * AD5672R, AD5676, AD5676R, AD5684, AD5684R, AD5684R, AD5685R, AD5686, AD5686R
+ * AD5672R, AD5676, AD5676R, AD5681R, AD5682R, AD5683, AD5683R,
+ * AD5684, AD5684R, AD5685R, AD5686, AD5686R
  * Digital to analog converters driver
  *
  * Copyright 2018 Analog Devices Inc.
@@ -15,12 +16,27 @@ static int ad5686_spi_write(struct ad5686_state *st,
 			    u8 cmd, u8 addr, u16 val)
 {
 	struct spi_device *spi = to_spi_device(st->dev);
-
-	st->data[0].d32 = cpu_to_be32(AD5686_CMD(cmd) |
-				      AD5686_ADDR(addr) |
-				      val);
-
-	return spi_write(spi, &st->data[0].d8[1], 3);
+	u8 tx_len, *buf;
+
+	switch (st->chip_info->regmap_type) {
+	case AD5683_REGMAP:
+		st->data[0].d32 = cpu_to_be32(AD5686_CMD(cmd) |
+					      AD5683_DATA(val));
+		buf = &st->data[0].d8[1];
+		tx_len = 3;
+		break;
+	case AD5686_REGMAP:
+		st->data[0].d32 = cpu_to_be32(AD5686_CMD(cmd) |
+					      AD5686_ADDR(addr) |
+					      val);
+		buf = &st->data[0].d8[1];
+		tx_len = 3;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return spi_write(spi, buf, tx_len);
 }
 
 static int ad5686_spi_read(struct ad5686_state *st, u8 addr)
@@ -37,9 +53,15 @@ static int ad5686_spi_read(struct ad5686_state *st, u8 addr)
 		},
 	};
 	struct spi_device *spi = to_spi_device(st->dev);
+	u8 cmd = 0;
 	int ret;
 
-	st->data[0].d32 = cpu_to_be32(AD5686_CMD(AD5686_CMD_READBACK_ENABLE) |
+	if (st->chip_info->regmap_type == AD5686_REGMAP)
+		cmd = AD5686_CMD_READBACK_ENABLE;
+	else if (st->chip_info->regmap_type == AD5683_REGMAP)
+		cmd = AD5686_CMD_READBACK_ENABLE_V2;
+
+	st->data[0].d32 = cpu_to_be32(AD5686_CMD(cmd) |
 				      AD5686_ADDR(addr));
 	st->data[1].d32 = cpu_to_be32(AD5686_CMD(AD5686_CMD_NOOP));
 
@@ -67,6 +89,10 @@ static const struct spi_device_id ad5686_spi_id[] = {
 	{"ad5672r", ID_AD5672R},
 	{"ad5676", ID_AD5676},
 	{"ad5676r", ID_AD5676R},
+	{"ad5681r", ID_AD5681R},
+	{"ad5682r", ID_AD5682R},
+	{"ad5683", ID_AD5683},
+	{"ad5683r", ID_AD5683R},
 	{"ad5684", ID_AD5684},
 	{"ad5684r", ID_AD5684R},
 	{"ad5685", ID_AD5685R}, /* Does not exist */

drivers/iio/dac/ad5686.c

@@ -83,6 +83,10 @@ static ssize_t ad5686_write_dac_powerdown(struct iio_dev *indio_dev,
 		st->pwr_down_mask &= ~(0x3 << (chan->channel * 2));
 
 	switch (st->chip_info->regmap_type) {
+	case AD5683_REGMAP:
+		shift = 13;
+		ref_bit_msk = AD5683_REF_BIT_MSK;
+		break;
 	case AD5686_REGMAP:
 		shift = 0;
 		ref_bit_msk = 0;
@@ -256,6 +260,29 @@ static const struct ad5686_chip_info ad5686_chip_info_tbl[] = {
 		.num_channels = 8,
 		.regmap_type = AD5686_REGMAP,
 	},
+	[ID_AD5681R] = {
+		.channels = ad5691r_channels,
+		.int_vref_mv = 2500,
+		.num_channels = 1,
+		.regmap_type = AD5683_REGMAP,
+	},
+	[ID_AD5682R] = {
+		.channels = ad5692r_channels,
+		.int_vref_mv = 2500,
+		.num_channels = 1,
+		.regmap_type = AD5683_REGMAP,
+	},
+	[ID_AD5683] = {
+		.channels = ad5693_channels,
+		.num_channels = 1,
+		.regmap_type = AD5683_REGMAP,
+	},
+	[ID_AD5683R] = {
+		.channels = ad5693_channels,
+		.int_vref_mv = 2500,
+		.num_channels = 1,
+		.regmap_type = AD5683_REGMAP,
+	},
 	[ID_AD5684] = {
 		.channels = ad5684_channels,
 		.num_channels = 4,
@@ -385,6 +412,11 @@ int ad5686_probe(struct device *dev,
 	indio_dev->num_channels = st->chip_info->num_channels;
 
 	switch (st->chip_info->regmap_type) {
+	case AD5683_REGMAP:
+		cmd = AD5686_CMD_CONTROL_REG;
+		ref_bit_msk = AD5683_REF_BIT_MSK;
+		st->use_internal_vref = !voltage_uv;
+		break;
 	case AD5686_REGMAP:
 		cmd = AD5686_CMD_INTERNAL_REFER_SETUP;
 		ref_bit_msk = 0;

drivers/iio/dac/ad5686.h

@@ -13,6 +13,7 @@
 #include <linux/mutex.h>
 #include <linux/kernel.h>
 
+#define AD5683_DATA(x)				((x) << 4)
 #define AD5686_ADDR(x)				((x) << 16)
 #define AD5686_CMD(x)				((x) << 20)
 
@@ -36,6 +37,8 @@
 #define AD5686_LDAC_PWRDN_3STATE		0x3
 
 #define AD5686_CMD_CONTROL_REG			0x4
+#define AD5686_CMD_READBACK_ENABLE_V2		0x5
+#define AD5683_REF_BIT_MSK			BIT(12)
 #define AD5693_REF_BIT_MSK			BIT(12)
 
 /**
@@ -47,6 +50,10 @@ enum ad5686_supported_device_ids {
 	ID_AD5675R,
 	ID_AD5676,
 	ID_AD5676R,
+	ID_AD5681R,
+	ID_AD5682R,
+	ID_AD5683,
+	ID_AD5683R,
 	ID_AD5684,
 	ID_AD5684R,
 	ID_AD5685R,
@@ -64,6 +71,7 @@ enum ad5686_supported_device_ids {
 };
 
 enum ad5686_regmap_type {
+	AD5683_REGMAP,
 	AD5686_REGMAP,
 	AD5693_REGMAP
 };