Merge tag 'v4.15-rc4' into perf/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Documentation/arm64/silicon-errata.txt

@@ -75,3 +75,4 @@ stable kernels.
 | Qualcomm Tech. | Falkor v1       | E1003           | QCOM_FALKOR_ERRATUM_1003    |
 | Qualcomm Tech. | Falkor v1       | E1009           | QCOM_FALKOR_ERRATUM_1009    |
 | Qualcomm Tech. | QDF2400 ITS     | E0065           | QCOM_QDF2400_ERRATUM_0065   |
+| Qualcomm Tech. | Falkor v{1,2}   | E1041           | QCOM_FALKOR_ERRATUM_1041    |

Documentation/cgroup-v2.txt

@@ -898,6 +898,13 @@ controller implements weight and absolute bandwidth limit models for
 normal scheduling policy and absolute bandwidth allocation model for
 realtime scheduling policy.
 
+WARNING: cgroup2 doesn't yet support control of realtime processes and
+the cpu controller can only be enabled when all RT processes are in
+the root cgroup.  Be aware that system management software may already
+have placed RT processes into nonroot cgroups during the system boot
+process, and these processes may need to be moved to the root cgroup
+before the cpu controller can be enabled.
+
 
 CPU Interface Files
 ~~~~~~~~~~~~~~~~~~~

Documentation/filesystems/overlayfs.txt

@@ -156,6 +156,40 @@ handle it in two different ways:
    root of the overlay.  Finally the directory is moved to the new
    location.
 
+There are several ways to tune the "redirect_dir" feature.
+
+Kernel config options:
+
+- OVERLAY_FS_REDIRECT_DIR:
+    If this is enabled, then redirect_dir is turned on by  default.
+- OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW:
+    If this is enabled, then redirects are always followed by default. Enabling
+    this results in a less secure configuration.  Enable this option only when
+    worried about backward compatibility with kernels that have the redirect_dir
+    feature and follow redirects even if turned off.
+
+Module options (can also be changed through /sys/module/overlay/parameters/*):
+
+- "redirect_dir=BOOL":
+    See OVERLAY_FS_REDIRECT_DIR kernel config option above.
+- "redirect_always_follow=BOOL":
+    See OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW kernel config option above.
+- "redirect_max=NUM":
+    The maximum number of bytes in an absolute redirect (default is 256).
+
+Mount options:
+
+- "redirect_dir=on":
+    Redirects are enabled.
+- "redirect_dir=follow":
+    Redirects are not created, but followed.
+- "redirect_dir=off":
+    Redirects are not created and only followed if "redirect_always_follow"
+    feature is enabled in the kernel/module config.
+- "redirect_dir=nofollow":
+    Redirects are not created and not followed (equivalent to "redirect_dir=off"
+    if "redirect_always_follow" feature is not enabled).
+
 Non-directories
 ---------------
 

Documentation/locking/crossrelease.txt

@@ -1,874 +0,0 @@
-Crossrelease
-============
-
-Started by Byungchul Park <byungchul.park@lge.com>
-
-Contents:
-
- (*) Background
-
-     - What causes deadlock
-     - How lockdep works
-
- (*) Limitation
-
-     - Limit lockdep
-     - Pros from the limitation
-     - Cons from the limitation
-     - Relax the limitation
-
- (*) Crossrelease
-
-     - Introduce crossrelease
-     - Introduce commit
-
- (*) Implementation
-
-     - Data structures
-     - How crossrelease works
-
- (*) Optimizations
-
-     - Avoid duplication
-     - Lockless for hot paths
-
- (*) APPENDIX A: What lockdep does to work aggresively
-
- (*) APPENDIX B: How to avoid adding false dependencies
-
-
-==========
-Background
-==========
-
-What causes deadlock
---------------------
-
-A deadlock occurs when a context is waiting for an event to happen,
-which is impossible because another (or the) context who can trigger the
-event is also waiting for another (or the) event to happen, which is
-also impossible due to the same reason.
-
-For example:
-
-   A context going to trigger event C is waiting for event A to happen.
-   A context going to trigger event A is waiting for event B to happen.
-   A context going to trigger event B is waiting for event C to happen.
-
-A deadlock occurs when these three wait operations run at the same time,
-because event C cannot be triggered if event A does not happen, which in
-turn cannot be triggered if event B does not happen, which in turn
-cannot be triggered if event C does not happen. After all, no event can
-be triggered since any of them never meets its condition to wake up.
-
-A dependency might exist between two waiters and a deadlock might happen
-due to an incorrect releationship between dependencies. Thus, we must
-define what a dependency is first. A dependency exists between them if:
-
-   1. There are two waiters waiting for each event at a given time.
-   2. The only way to wake up each waiter is to trigger its event.
-   3. Whether one can be woken up depends on whether the other can.
-
-Each wait in the example creates its dependency like:
-
-   Event C depends on event A.
-   Event A depends on event B.
-   Event B depends on event C.
-
-   NOTE: Precisely speaking, a dependency is one between whether a
-   waiter for an event can be woken up and whether another waiter for
-   another event can be woken up. However from now on, we will describe
-   a dependency as if it's one between an event and another event for
-   simplicity.
-
-And they form circular dependencies like:
-
-    -> C -> A -> B -
-   /                \
-   \                /
-    ----------------
-
-   where 'A -> B' means that event A depends on event B.
-
-Such circular dependencies lead to a deadlock since no waiter can meet
-its condition to wake up as described.
-
-CONCLUSION
-
-Circular dependencies cause a deadlock.
-
-
-How lockdep works
------------------
-
-Lockdep tries to detect a deadlock by checking dependencies created by
-lock operations, acquire and release. Waiting for a lock corresponds to
-waiting for an event, and releasing a lock corresponds to triggering an
-event in the previous section.
-
-In short, lockdep does:
-
-   1. Detect a new dependency.
-   2. Add the dependency into a global graph.
-   3. Check if that makes dependencies circular.
-   4. Report a deadlock or its possibility if so.
-
-For example, consider a graph built by lockdep that looks like:
-
-   A -> B -
-           \
-            -> E
-           /
-   C -> D -
-
-   where A, B,..., E are different lock classes.
-
-Lockdep will add a dependency into the graph on detection of a new
-dependency. For example, it will add a dependency 'E -> C' when a new
-dependency between lock E and lock C is detected. Then the graph will be:
-
-       A -> B -
-               \
-                -> E -
-               /      \
-    -> C -> D -        \
-   /                   /
-   \                  /
-    ------------------
-
-   where A, B,..., E are different lock classes.
-
-This graph contains a subgraph which demonstrates circular dependencies:
-
-                -> E -
-               /      \
-    -> C -> D -        \
-   /                   /
-   \                  /
-    ------------------
-
-   where C, D and E are different lock classes.
-
-This is the condition under which a deadlock might occur. Lockdep
-reports it on detection after adding a new dependency. This is the way
-how lockdep works.
-
-CONCLUSION
-
-Lockdep detects a deadlock or its possibility by checking if circular
-dependencies were created after adding each new dependency.
-
-
-==========
-Limitation
-==========
-
-Limit lockdep
--------------
-
-Limiting lockdep to work on only typical locks e.g. spin locks and
-mutexes, which are released within the acquire context, the
-implementation becomes simple but its capacity for detection becomes
-limited. Let's check pros and cons in next section.
-
-
-Pros from the limitation
-------------------------
-
-Given the limitation, when acquiring a lock, locks in a held_locks
-cannot be released if the context cannot acquire it so has to wait to
-acquire it, which means all waiters for the locks in the held_locks are
-stuck. It's an exact case to create dependencies between each lock in
-the held_locks and the lock to acquire.
-
-For example:
-
-   CONTEXT X
-   ---------
-   acquire A
-   acquire B /* Add a dependency 'A -> B' */
-   release B
-   release A
-
-   where A and B are different lock classes.
-
-When acquiring lock A, the held_locks of CONTEXT X is empty thus no
-dependency is added. But when acquiring lock B, lockdep detects and adds
-a new dependency 'A -> B' between lock A in the held_locks and lock B.
-They can be simply added whenever acquiring each lock.
-
-And data required by lockdep exists in a local structure, held_locks
-embedded in task_struct. Forcing to access the data within the context,
-lockdep can avoid racy problems without explicit locks while handling
-the local data.
-
-Lastly, lockdep only needs to keep locks currently being held, to build
-a dependency graph. However, relaxing the limitation, it needs to keep
-even locks already released, because a decision whether they created
-dependencies might be long-deferred.
-
-To sum up, we can expect several advantages from the limitation:
-
-   1. Lockdep can easily identify a dependency when acquiring a lock.
-   2. Races are avoidable while accessing local locks in a held_locks.
-   3. Lockdep only needs to keep locks currently being held.
-
-CONCLUSION
-
-Given the limitation, the implementation becomes simple and efficient.
-
-
-Cons from the limitation
-------------------------
-
-Given the limitation, lockdep is applicable only to typical locks. For
-example, page locks for page access or completions for synchronization
-cannot work with lockdep.
-
-Can we detect deadlocks below, under the limitation?
-
-Example 1:
-
-   CONTEXT X	   CONTEXT Y	   CONTEXT Z
-   ---------	   ---------	   ----------
-		   mutex_lock A
-   lock_page B
-		   lock_page B
-				   mutex_lock A /* DEADLOCK */
-				   unlock_page B held by X
-		   unlock_page B
-		   mutex_unlock A
-				   mutex_unlock A
-
-   where A and B are different lock classes.
-
-No, we cannot.
-
-Example 2:
-
-   CONTEXT X		   CONTEXT Y
-   ---------		   ---------
-			   mutex_lock A
-   mutex_lock A
-			   wait_for_complete B /* DEADLOCK */
-   complete B
-			   mutex_unlock A
-   mutex_unlock A
-
-   where A is a lock class and B is a completion variable.
-
-No, we cannot.
-
-CONCLUSION
-
-Given the limitation, lockdep cannot detect a deadlock or its
-possibility caused by page locks or completions.
-
-
-Relax the limitation
---------------------
-
-Under the limitation, things to create dependencies are limited to
-typical locks. However, synchronization primitives like page locks and
-completions, which are allowed to be released in any context, also
-create dependencies and can cause a deadlock. So lockdep should track
-these locks to do a better job. We have to relax the limitation for
-these locks to work with lockdep.
-
-Detecting dependencies is very important for lockdep to work because
-adding a dependency means adding an opportunity to check whether it
-causes a deadlock. The more lockdep adds dependencies, the more it
-thoroughly works. Thus Lockdep has to do its best to detect and add as
-many true dependencies into a graph as possible.
-
-For example, considering only typical locks, lockdep builds a graph like:
-
-   A -> B -
-           \
-            -> E
-           /
-   C -> D -
-
-   where A, B,..., E are different lock classes.
-
-On the other hand, under the relaxation, additional dependencies might
-be created and added. Assuming additional 'FX -> C' and 'E -> GX' are
-added thanks to the relaxation, the graph will be:
-
-         A -> B -
-                 \
-                  -> E -> GX
-                 /
-   FX -> C -> D -
-
-   where A, B,..., E, FX and GX are different lock classes, and a suffix
-   'X' is added on non-typical locks.
-
-The latter graph gives us more chances to check circular dependencies
-than the former. However, it might suffer performance degradation since
-relaxing the limitation, with which design and implementation of lockdep
-can be efficient, might introduce inefficiency inevitably. So lockdep
-should provide two options, strong detection and efficient detection.
-
-Choosing efficient detection:
-
-   Lockdep works with only locks restricted to be released within the
-   acquire context. However, lockdep works efficiently.
-
-Choosing strong detection:
-
-   Lockdep works with all synchronization primitives. However, lockdep
-   suffers performance degradation.
-
-CONCLUSION
-
-Relaxing the limitation, lockdep can add additional dependencies giving
-additional opportunities to check circular dependencies.
-
-
-============
-Crossrelease
-============
-
-Introduce crossrelease
-----------------------
-
-In order to allow lockdep to handle additional dependencies by what
-might be released in any context, namely 'crosslock', we have to be able
-to identify those created by crosslocks. The proposed 'crossrelease'
-feature provoides a way to do that.
-
-Crossrelease feature has to do:
-
-   1. Identify dependencies created by crosslocks.
-   2. Add the dependencies into a dependency graph.
-
-That's all. Once a meaningful dependency is added into graph, then
-lockdep would work with the graph as it did. The most important thing
-crossrelease feature has to do is to correctly identify and add true
-dependencies into the global graph.
-
-A dependency e.g. 'A -> B' can be identified only in the A's release
-context because a decision required to identify the dependency can be
-made only in the release context. That is to decide whether A can be
-released so that a waiter for A can be woken up. It cannot be made in
-other than the A's release context.
-
-It's no matter for typical locks because each acquire context is same as
-its release context, thus lockdep can decide whether a lock can be
-released in the acquire context. However for crosslocks, lockdep cannot
-make the decision in the acquire context but has to wait until the
-release context is identified.
-
-Therefore, deadlocks by crosslocks cannot be detected just when it
-happens, because those cannot be identified until the crosslocks are
-released. However, deadlock possibilities can be detected and it's very
-worth. See 'APPENDIX A' section to check why.
-
-CONCLUSION
-
-Using crossrelease feature, lockdep can work with what might be released
-in any context, namely crosslock.
-
-
-Introduce commit
-----------------
-
-Since crossrelease defers the work adding true dependencies of
-crosslocks until they are actually released, crossrelease has to queue
-all acquisitions which might create dependencies with the crosslocks.
-Then it identifies dependencies using the queued data in batches at a
-proper time. We call it 'commit'.
-
-There are four types of dependencies:
-
-1. TT type: 'typical lock A -> typical lock B'
-
-   Just when acquiring B, lockdep can see it's in the A's release
-   context. So the dependency between A and B can be identified
-   immediately. Commit is unnecessary.
-
-2. TC type: 'typical lock A -> crosslock BX'
-
-   Just when acquiring BX, lockdep can see it's in the A's release
-   context. So the dependency between A and BX can be identified
-   immediately. Commit is unnecessary, too.
-
-3. CT type: 'crosslock AX -> typical lock B'
-
-   When acquiring B, lockdep cannot identify the dependency because
-   there's no way to know if it's in the AX's release context. It has
-   to wait until the decision can be made. Commit is necessary.
-
-4. CC type: 'crosslock AX -> crosslock BX'
-
-   When acquiring BX, lockdep cannot identify the dependency because
-   there's no way to know if it's in the AX's release context. It has
-   to wait until the decision can be made. Commit is necessary.
-   But, handling CC type is not implemented yet. It's a future work.
-
-Lockdep can work without commit for typical locks, but commit step is
-necessary once crosslocks are involved. Introducing commit, lockdep
-performs three steps. What lockdep does in each step is:
-
-1. Acquisition: For typical locks, lockdep does what it originally did
-   and queues the lock so that CT type dependencies can be checked using
-   it at the commit step. For crosslocks, it saves data which will be
-   used at the commit step and increases a reference count for it.
-
-2. Commit: No action is reauired for typical locks. For crosslocks,
-   lockdep adds CT type dependencies using the data saved at the
-   acquisition step.
-
-3. Release: No changes are required for typical locks. When a crosslock
-   is released, it decreases a reference count for it.
-
-CONCLUSION
-
-Crossrelease introduces commit step to handle dependencies of crosslocks
-in batches at a proper time.
-
-
-==============
-Implementation
-==============
-
-Data structures
----------------
-
-Crossrelease introduces two main data structures.
-
-1. hist_lock
-
-   This is an array embedded in task_struct, for keeping lock history so
-   that dependencies can be added using them at the commit step. Since
-   it's local data, it can be accessed locklessly in the owner context.
-   The array is filled at the acquisition step and consumed at the
-   commit step. And it's managed in circular manner.
-
-2. cross_lock
-
-   One per lockdep_map exists. This is for keeping data of crosslocks
-   and used at the commit step.
-
-
-How crossrelease works
-----------------------
-
-It's the key of how crossrelease works, to defer necessary works to an
-appropriate point in time and perform in at once at the commit step.
-Let's take a look with examples step by step, starting from how lockdep
-works without crossrelease for typical locks.
-
-   acquire A /* Push A onto held_locks */
-   acquire B /* Push B onto held_locks and add 'A -> B' */
-   acquire C /* Push C onto held_locks and add 'B -> C' */
-   release C /* Pop C from held_locks */
-   release B /* Pop B from held_locks */
-   release A /* Pop A from held_locks */
-
-   where A, B and C are different lock classes.
-
-   NOTE: This document assumes that readers already understand how
-   lockdep works without crossrelease thus omits details. But there's
-   one thing to note. Lockdep pretends to pop a lock from held_locks
-   when releasing it. But it's subtly different from the original pop
-   operation because lockdep allows other than the top to be poped.
-
-In this case, lockdep adds 'the top of held_locks -> the lock to acquire'
-dependency every time acquiring a lock.
-
-After adding 'A -> B', a dependency graph will be:
-
-   A -> B
-
-   where A and B are different lock classes.
-
-And after adding 'B -> C', the graph will be:
-
-   A -> B -> C
-
-   where A, B and C are different lock classes.
-
-Let's performs commit step even for typical locks to add dependencies.
-Of course, commit step is not necessary for them, however, it would work
-well because this is a more general way.
-
-   acquire A
-   /*
-    * Queue A into hist_locks
-    *
-    * In hist_locks: A
-    * In graph: Empty
-    */
-
-   acquire B
-   /*
-    * Queue B into hist_locks
-    *
-    * In hist_locks: A, B
-    * In graph: Empty
-    */
-
-   acquire C
-   /*
-    * Queue C into hist_locks
-    *
-    * In hist_locks: A, B, C
-    * In graph: Empty
-    */
-
-   commit C
-   /*
-    * Add 'C -> ?'
-    * Answer the following to decide '?'
-    * What has been queued since acquire C: Nothing
-    *
-    * In hist_locks: A, B, C
-    * In graph: Empty
-    */
-
-   release C
-
-   commit B
-   /*
-    * Add 'B -> ?'
-    * Answer the following to decide '?'
-    * What has been queued since acquire B: C
-    *
-    * In hist_locks: A, B, C
-    * In graph: 'B -> C'
-    */
-
-   release B
-
-   commit A
-   /*
-    * Add 'A -> ?'
-    * Answer the following to decide '?'
-    * What has been queued since acquire A: B, C
-    *
-    * In hist_locks: A, B, C
-    * In graph: 'B -> C', 'A -> B', 'A -> C'
-    */
-
-   release A
-
-   where A, B and C are different lock classes.
-
-In this case, dependencies are added at the commit step as described.
-
-After commits for A, B and C, the graph will be:
-
-   A -> B -> C
-
-   where A, B and C are different lock classes.
-
-   NOTE: A dependency 'A -> C' is optimized out.
-
-We can see the former graph built without commit step is same as the
-latter graph built using commit steps. Of course the former way leads to
-earlier finish for building the graph, which means we can detect a
-deadlock or its possibility sooner. So the former way would be prefered
-when possible. But we cannot avoid using the latter way for crosslocks.
-
-Let's look at how commit steps work for crosslocks. In this case, the
-commit step is performed only on crosslock AX as real. And it assumes
-that the AX release context is different from the AX acquire context.
-
-   BX RELEASE CONTEXT		   BX ACQUIRE CONTEXT
-   ------------------		   ------------------
-				   acquire A
-				   /*
-				    * Push A onto held_locks
-				    * Queue A into hist_locks
-				    *
-				    * In held_locks: A
-				    * In hist_locks: A
-				    * In graph: Empty
-				    */
-
-				   acquire BX
-				   /*
-				    * Add 'the top of held_locks -> BX'
-				    *
-				    * In held_locks: A
-				    * In hist_locks: A
-				    * In graph: 'A -> BX'
-				    */
-
-   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-   It must be guaranteed that the following operations are seen after
-   acquiring BX globally. It can be done by things like barrier.
-   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-   acquire C
-   /*
-    * Push C onto held_locks
-    * Queue C into hist_locks
-    *
-    * In held_locks: C
-    * In hist_locks: C
-    * In graph: 'A -> BX'
-    */
-
-   release C
-   /*
-    * Pop C from held_locks
-    *
-    * In held_locks: Empty
-    * In hist_locks: C
-    * In graph: 'A -> BX'
-    */
-				   acquire D
-				   /*
-				    * Push D onto held_locks
-				    * Queue D into hist_locks
-				    * Add 'the top of held_locks -> D'
-				    *
-				    * In held_locks: A, D
-				    * In hist_locks: A, D
-				    * In graph: 'A -> BX', 'A -> D'
-				    */
-   acquire E
-   /*
-    * Push E onto held_locks
-    * Queue E into hist_locks
-    *
-    * In held_locks: E
-    * In hist_locks: C, E
-    * In graph: 'A -> BX', 'A -> D'
-    */
-
-   release E
-   /*
-    * Pop E from held_locks
-    *
-    * In held_locks: Empty
-    * In hist_locks: D, E
-    * In graph: 'A -> BX', 'A -> D'
-    */
-				   release D
-				   /*
-				    * Pop D from held_locks
-				    *
-				    * In held_locks: A
-				    * In hist_locks: A, D
-				    * In graph: 'A -> BX', 'A -> D'
-				    */
-   commit BX
-   /*
-    * Add 'BX -> ?'
-    * What has been queued since acquire BX: C, E
-    *
-    * In held_locks: Empty
-    * In hist_locks: D, E
-    * In graph: 'A -> BX', 'A -> D',
-    *           'BX -> C', 'BX -> E'
-    */
-
-   release BX
-   /*
-    * In held_locks: Empty
-    * In hist_locks: D, E
-    * In graph: 'A -> BX', 'A -> D',
-    *           'BX -> C', 'BX -> E'
-    */
-				   release A
-				   /*
-				    * Pop A from held_locks
-				    *
-				    * In held_locks: Empty
-				    * In hist_locks: A, D
-				    * In graph: 'A -> BX', 'A -> D',
-				    *           'BX -> C', 'BX -> E'
-				    */
-
-   where A, BX, C,..., E are different lock classes, and a suffix 'X' is
-   added on crosslocks.
-
-Crossrelease considers all acquisitions after acqiuring BX are
-candidates which might create dependencies with BX. True dependencies
-will be determined when identifying the release context of BX. Meanwhile,
-all typical locks are queued so that they can be used at the commit step.
-And then two dependencies 'BX -> C' and 'BX -> E' are added at the
-commit step when identifying the release context.
-
-The final graph will be, with crossrelease:
-
-               -> C
-              /
-       -> BX -
-      /       \
-   A -         -> E
-      \
-       -> D
-
-   where A, BX, C,..., E are different lock classes, and a suffix 'X' is
-   added on crosslocks.
-
-However, the final graph will be, without crossrelease:
-
-   A -> D
-
-   where A and D are different lock classes.
-
-The former graph has three more dependencies, 'A -> BX', 'BX -> C' and
-'BX -> E' giving additional opportunities to check if they cause
-deadlocks. This way lockdep can detect a deadlock or its possibility
-caused by crosslocks.
-
-CONCLUSION
-
-We checked how crossrelease works with several examples.
-
-
-=============
-Optimizations
-=============
-
-Avoid duplication
------------------
-
-Crossrelease feature uses a cache like what lockdep already uses for
-dependency chains, but this time it's for caching CT type dependencies.
-Once that dependency is cached, the same will never be added again.
-
-
-Lockless for hot paths
-----------------------
-
-To keep all locks for later use at the commit step, crossrelease adopts
-a local array embedded in task_struct, which makes access to the data
-lockless by forcing it to happen only within the owner context. It's
-like how lockdep handles held_locks. Lockless implmentation is important
-since typical locks are very frequently acquired and released.
-
-
-=================================================
-APPENDIX A: What lockdep does to work aggresively
-=================================================
-
-A deadlock actually occurs when all wait operations creating circular
-dependencies run at the same time. Even though they don't, a potential
-deadlock exists if the problematic dependencies exist. Thus it's
-meaningful to detect not only an actual deadlock but also its potential
-possibility. The latter is rather valuable. When a deadlock occurs
-actually, we can identify what happens in the system by some means or
-other even without lockdep. However, there's no way to detect possiblity
-without lockdep unless the whole code is parsed in head. It's terrible.
-Lockdep does the both, and crossrelease only focuses on the latter.
-
-Whether or not a deadlock actually occurs depends on several factors.
-For example, what order contexts are switched in is a factor. Assuming
-circular dependencies exist, a deadlock would occur when contexts are
-switched so that all wait operations creating the dependencies run
-simultaneously. Thus to detect a deadlock possibility even in the case
-that it has not occured yet, lockdep should consider all possible
-combinations of dependencies, trying to:
-
-1. Use a global dependency graph.
-
-   Lockdep combines all dependencies into one global graph and uses them,
-   regardless of which context generates them or what order contexts are
-   switched in. Aggregated dependencies are only considered so they are
-   prone to be circular if a problem exists.
-
-2. Check dependencies between classes instead of instances.
-
-   What actually causes a deadlock are instances of lock. However,
-   lockdep checks dependencies between classes instead of instances.
-   This way lockdep can detect a deadlock which has not happened but
-   might happen in future by others but the same class.
-
-3. Assume all acquisitions lead to waiting.
-
-   Although locks might be acquired without waiting which is essential
-   to create dependencies, lockdep assumes all acquisitions lead to
-   waiting since it might be true some time or another.
-
-CONCLUSION
-
-Lockdep detects not only an actual deadlock but also its possibility,
-and the latter is more valuable.
-
-
-==================================================
-APPENDIX B: How to avoid adding false dependencies
-==================================================
-
-Remind what a dependency is. A dependency exists if:
-
-   1. There are two waiters waiting for each event at a given time.
-   2. The only way to wake up each waiter is to trigger its event.
-   3. Whether one can be woken up depends on whether the other can.
-
-For example:
-
-   acquire A
-   acquire B /* A dependency 'A -> B' exists */
-   release B
-   release A
-
-   where A and B are different lock classes.
-
-A depedency 'A -> B' exists since:
-
-   1. A waiter for A and a waiter for B might exist when acquiring B.
-   2. Only way to wake up each is to release what it waits for.
-   3. Whether the waiter for A can be woken up depends on whether the
-      other can. IOW, TASK X cannot release A if it fails to acquire B.
-
-For another example:
-
-   TASK X			   TASK Y
-   ------			   ------
-				   acquire AX
-   acquire B /* A dependency 'AX -> B' exists */
-   release B
-   release AX held by Y
-
-   where AX and B are different lock classes, and a suffix 'X' is added
-   on crosslocks.
-
-Even in this case involving crosslocks, the same rule can be applied. A
-depedency 'AX -> B' exists since:
-
-   1. A waiter for AX and a waiter for B might exist when acquiring B.
-   2. Only way to wake up each is to release what it waits for.
-   3. Whether the waiter for AX can be woken up depends on whether the
-      other can. IOW, TASK X cannot release AX if it fails to acquire B.
-
-Let's take a look at more complicated example:
-
-   TASK X			   TASK Y
-   ------			   ------
-   acquire B
-   release B
-   fork Y
-				   acquire AX
-   acquire C /* A dependency 'AX -> C' exists */
-   release C
-   release AX held by Y
-
-   where AX, B and C are different lock classes, and a suffix 'X' is
-   added on crosslocks.
-
-Does a dependency 'AX -> B' exist? Nope.
-
-Two waiters are essential to create a dependency. However, waiters for
-AX and B to create 'AX -> B' cannot exist at the same time in this
-example. Thus the dependency 'AX -> B' cannot be created.
-
-It would be ideal if the full set of true ones can be considered. But
-we can ensure nothing but what actually happened. Relying on what
-actually happens at runtime, we can anyway add only true ones, though
-they might be a subset of true ones. It's similar to how lockdep works
-for typical locks. There might be more true dependencies than what
-lockdep has detected in runtime. Lockdep has no choice but to rely on
-what actually happens. Crossrelease also relies on it.
-
-CONCLUSION
-
-Relying on what actually happens, lockdep can avoid adding false
-dependencies.

Documentation/vm/zswap.txt

@@ -98,5 +98,25 @@ request is made for a page in an old zpool, it is uncompressed using its
 original compressor.  Once all pages are removed from an old zpool, the zpool
 and its compressor are freed.
 
+Some of the pages in zswap are same-value filled pages (i.e. contents of the
+page have same value or repetitive pattern). These pages include zero-filled
+pages and they are handled differently. During store operation, a page is
+checked if it is a same-value filled page before compressing it. If true, the
+compressed length of the page is set to zero and the pattern or same-filled
+value is stored.
+
+Same-value filled pages identification feature is enabled by default and can be
+disabled at boot time by setting the "same_filled_pages_enabled" attribute to 0,
+e.g. zswap.same_filled_pages_enabled=0. It can also be enabled and disabled at
+runtime using the sysfs "same_filled_pages_enabled" attribute, e.g.
+
+echo 1 > /sys/module/zswap/parameters/same_filled_pages_enabled
+
+When zswap same-filled page identification is disabled at runtime, it will stop
+checking for the same-value filled pages during store operation. However, the
+existing pages which are marked as same-value filled pages remain stored
+unchanged in zswap until they are either loaded or invalidated.
+
 A debugfs interface is provided for various statistic about pool size, number
-of pages stored, and various counters for the reasons pages are rejected.
+of pages stored, same-value filled pages and various counters for the reasons
+pages are rejected.

MAINTAINERS

@@ -5431,7 +5431,7 @@ F:	drivers/media/tuners/fc2580*
 
 FCOE SUBSYSTEM (libfc, libfcoe, fcoe)
 M:	Johannes Thumshirn <jth@kernel.org>
-L:	fcoe-devel@open-fcoe.org
+L:	linux-scsi@vger.kernel.org
 W:	www.Open-FCoE.org
 S:	Supported
 F:	drivers/scsi/libfc/
@@ -13117,6 +13117,7 @@ F:	drivers/dma/dw/
 
 SYNOPSYS DESIGNWARE ENTERPRISE ETHERNET DRIVER
 M:	Jie Deng <jiedeng@synopsys.com>
+M:	Jose Abreu <Jose.Abreu@synopsys.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/synopsys/

Makefile

@@ -2,7 +2,7 @@
 VERSION = 4
 PATCHLEVEL = 15
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
 NAME = Fearless Coyote
 
 # *DOCUMENTATION*

arch/arm/boot/dts/vf610-zii-dev-rev-c.dts

@@ -121,7 +121,7 @@
 					switch0port10: port@10 {
 						reg = <10>;
 						label = "dsa";
-						phy-mode = "xgmii";
+						phy-mode = "xaui";
 						link = <&switch1port10>;
 					};
 				};
@@ -208,7 +208,7 @@
 					switch1port10: port@10 {
 						reg = <10>;
 						label = "dsa";
-						phy-mode = "xgmii";
+						phy-mode = "xaui";
 						link = <&switch0port10>;
 					};
 				};

arch/arm64/Kconfig

@@ -557,7 +557,6 @@ config QCOM_QDF2400_ERRATUM_0065
 
 	  If unsure, say Y.
 
-
 config SOCIONEXT_SYNQUACER_PREITS
 	bool "Socionext Synquacer: Workaround for GICv3 pre-ITS"
 	default y
@@ -576,6 +575,17 @@ config HISILICON_ERRATUM_161600802
 	  a 128kB offset to be applied to the target address in this commands.
 
 	  If unsure, say Y.
+
+config QCOM_FALKOR_ERRATUM_E1041
+	bool "Falkor E1041: Speculative instruction fetches might cause errant memory access"
+	default y
+	help
+	  Falkor CPU may speculatively fetch instructions from an improper
+	  memory location when MMU translation is changed from SCTLR_ELn[M]=1
+	  to SCTLR_ELn[M]=0. Prefix an ISB instruction to fix the problem.
+
+	  If unsure, say Y.
+
 endmenu
 
 

arch/arm64/include/asm/assembler.h

@@ -512,4 +512,14 @@ alternative_else_nop_endif
 #endif
 	.endm
 
+/**
+ * Errata workaround prior to disable MMU. Insert an ISB immediately prior
+ * to executing the MSR that will change SCTLR_ELn[M] from a value of 1 to 0.
+ */
+	.macro pre_disable_mmu_workaround
+#ifdef CONFIG_QCOM_FALKOR_ERRATUM_E1041
+	isb
+#endif
+	.endm
+
 #endif	/* __ASM_ASSEMBLER_H */

arch/arm64/include/asm/cpufeature.h

@@ -60,6 +60,9 @@ enum ftr_type {
 #define FTR_VISIBLE	true	/* Feature visible to the user space */
 #define FTR_HIDDEN	false	/* Feature is hidden from the user */
 
+#define FTR_VISIBLE_IF_IS_ENABLED(config)		\
+	(IS_ENABLED(config) ? FTR_VISIBLE : FTR_HIDDEN)
+
 struct arm64_ftr_bits {
 	bool		sign;	/* Value is signed ? */
 	bool		visible;

arch/arm64/include/asm/cputype.h

@@ -91,6 +91,7 @@
 #define BRCM_CPU_PART_VULCAN		0x516
 
 #define QCOM_CPU_PART_FALKOR_V1		0x800
+#define QCOM_CPU_PART_FALKOR		0xC00
 
 #define MIDR_CORTEX_A53 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A53)
 #define MIDR_CORTEX_A57 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A57)
@@ -99,6 +100,7 @@
 #define MIDR_THUNDERX_81XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX_81XX)
 #define MIDR_THUNDERX_83XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX_83XX)
 #define MIDR_QCOM_FALKOR_V1 MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_FALKOR_V1)
+#define MIDR_QCOM_FALKOR MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_FALKOR)
 
 #ifndef __ASSEMBLY__
 

arch/arm64/include/asm/pgtable.h

@@ -42,6 +42,8 @@
 #include <asm/cmpxchg.h>
 #include <asm/fixmap.h>
 #include <linux/mmdebug.h>
+#include <linux/mm_types.h>
+#include <linux/sched.h>
 
 extern void __pte_error(const char *file, int line, unsigned long val);
 extern void __pmd_error(const char *file, int line, unsigned long val);
@@ -149,12 +151,20 @@ static inline pte_t pte_mkwrite(pte_t pte)
 
 static inline pte_t pte_mkclean(pte_t pte)
 {
-	return clear_pte_bit(pte, __pgprot(PTE_DIRTY));
+	pte = clear_pte_bit(pte, __pgprot(PTE_DIRTY));
+	pte = set_pte_bit(pte, __pgprot(PTE_RDONLY));
+
+	return pte;
 }
 
 static inline pte_t pte_mkdirty(pte_t pte)
 {
-	return set_pte_bit(pte, __pgprot(PTE_DIRTY));
+	pte = set_pte_bit(pte, __pgprot(PTE_DIRTY));
+
+	if (pte_write(pte))
+		pte = clear_pte_bit(pte, __pgprot(PTE_RDONLY));
+
+	return pte;
 }
 
 static inline pte_t pte_mkold(pte_t pte)
@@ -207,9 +217,6 @@ static inline void set_pte(pte_t *ptep, pte_t pte)
 	}
 }
 
-struct mm_struct;
-struct vm_area_struct;
-
 extern void __sync_icache_dcache(pte_t pteval, unsigned long addr);
 
 /*
@@ -238,7 +245,8 @@ static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
 	 * hardware updates of the pte (ptep_set_access_flags safely changes
 	 * valid ptes without going through an invalid entry).
 	 */
-	if (pte_valid(*ptep) && pte_valid(pte)) {
+	if (IS_ENABLED(CONFIG_DEBUG_VM) && pte_valid(*ptep) && pte_valid(pte) &&
+	   (mm == current->active_mm || atomic_read(&mm->mm_users) > 1)) {
 		VM_WARN_ONCE(!pte_young(pte),
 			     "%s: racy access flag clearing: 0x%016llx -> 0x%016llx",
 			     __func__, pte_val(*ptep), pte_val(pte));
@@ -641,28 +649,23 @@ static inline pmd_t pmdp_huge_get_and_clear(struct mm_struct *mm,
 #endif /* CONFIG_TRANSPARENT_HUGEPAGE */
 
 /*
- * ptep_set_wrprotect - mark read-only while preserving the hardware update of
- * the Access Flag.
+ * ptep_set_wrprotect - mark read-only while trasferring potential hardware
+ * dirty status (PTE_DBM && !PTE_RDONLY) to the software PTE_DIRTY bit.
  */
 #define __HAVE_ARCH_PTEP_SET_WRPROTECT
 static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long address, pte_t *ptep)
 {
 	pte_t old_pte, pte;
 
-	/*
-	 * ptep_set_wrprotect() is only called on CoW mappings which are
-	 * private (!VM_SHARED) with the pte either read-only (!PTE_WRITE &&
-	 * PTE_RDONLY) or writable and software-dirty (PTE_WRITE &&
-	 * !PTE_RDONLY && PTE_DIRTY); see is_cow_mapping() and
-	 * protection_map[]. There is no race with the hardware update of the
-	 * dirty state: clearing of PTE_RDONLY when PTE_WRITE (a.k.a. PTE_DBM)
-	 * is set.
-	 */
-	VM_WARN_ONCE(pte_write(*ptep) && !pte_dirty(*ptep),
-		     "%s: potential race with hardware DBM", __func__);
 	pte = READ_ONCE(*ptep);
 	do {
 		old_pte = pte;
+		/*
+		 * If hardware-dirty (PTE_WRITE/DBM bit set and PTE_RDONLY
+		 * clear), set the PTE_DIRTY bit.
+		 */
+		if (pte_hw_dirty(pte))
+			pte = pte_mkdirty(pte);
 		pte = pte_wrprotect(pte);
 		pte_val(pte) = cmpxchg_relaxed(&pte_val(*ptep),
 					       pte_val(old_pte), pte_val(pte));

arch/arm64/kernel/cpu-reset.S

@@ -37,6 +37,7 @@ ENTRY(__cpu_soft_restart)
 	mrs	x12, sctlr_el1
 	ldr	x13, =SCTLR_ELx_FLAGS
 	bic	x12, x12, x13
+	pre_disable_mmu_workaround
 	msr	sctlr_el1, x12
 	isb
 

arch/arm64/kernel/cpufeature.c

@@ -145,7 +145,8 @@ static const struct arm64_ftr_bits ftr_id_aa64isar1[] = {
 };
 
 static const struct arm64_ftr_bits ftr_id_aa64pfr0[] = {
-	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_SVE_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE),
+				   FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_SVE_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_GIC_SHIFT, 4, 0),
 	S_ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_ASIMD_SHIFT, 4, ID_AA64PFR0_ASIMD_NI),
 	S_ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_FP_SHIFT, 4, ID_AA64PFR0_FP_NI),

arch/arm64/kernel/efi-entry.S

@@ -96,6 +96,7 @@ ENTRY(entry)
 	mrs	x0, sctlr_el2
 	bic	x0, x0, #1 << 0	// clear SCTLR.M
 	bic	x0, x0, #1 << 2	// clear SCTLR.C
+	pre_disable_mmu_workaround
 	msr	sctlr_el2, x0
 	isb
 	b	2f
@@ -103,6 +104,7 @@ ENTRY(entry)
 	mrs	x0, sctlr_el1
 	bic	x0, x0, #1 << 0	// clear SCTLR.M
 	bic	x0, x0, #1 << 2	// clear SCTLR.C
+	pre_disable_mmu_workaround
 	msr	sctlr_el1, x0
 	isb
 2:

arch/arm64/kernel/fpsimd.c

@@ -1043,7 +1043,7 @@ void fpsimd_update_current_state(struct fpsimd_state *state)
 
 	local_bh_disable();
 
-	current->thread.fpsimd_state = *state;
+	current->thread.fpsimd_state.user_fpsimd = state->user_fpsimd;
 	if (system_supports_sve() && test_thread_flag(TIF_SVE))
 		fpsimd_to_sve(current);
 

arch/arm64/kernel/head.S

@@ -750,6 +750,7 @@ __primary_switch:
 	 * to take into account by discarding the current kernel mapping and
 	 * creating a new one.
 	 */
+	pre_disable_mmu_workaround
 	msr	sctlr_el1, x20			// disable the MMU
 	isb
 	bl	__create_page_tables		// recreate kernel mapping

arch/arm64/kernel/hw_breakpoint.c

@@ -28,6 +28,7 @@
 #include <linux/perf_event.h>
 #include <linux/ptrace.h>
 #include <linux/smp.h>
+#include <linux/uaccess.h>
 
 #include <asm/compat.h>
 #include <asm/current.h>
@@ -36,7 +37,6 @@
 #include <asm/traps.h>
 #include <asm/cputype.h>
 #include <asm/system_misc.h>
-#include <asm/uaccess.h>
 
 /* Breakpoint currently in use for each BRP. */
 static DEFINE_PER_CPU(struct perf_event *, bp_on_reg[ARM_MAX_BRP]);

arch/arm64/kernel/relocate_kernel.S

@@ -45,6 +45,7 @@ ENTRY(arm64_relocate_new_kernel)
 	mrs	x0, sctlr_el2
 	ldr	x1, =SCTLR_ELx_FLAGS
 	bic	x0, x0, x1
+	pre_disable_mmu_workaround
 	msr	sctlr_el2, x0
 	isb
 1:

arch/arm64/kvm/hyp-init.S

@@ -151,6 +151,7 @@ reset:
 	mrs	x5, sctlr_el2
 	ldr	x6, =SCTLR_ELx_FLAGS
 	bic	x5, x5, x6		// Clear SCTL_M and etc
+	pre_disable_mmu_workaround
 	msr	sctlr_el2, x5
 	isb
 

arch/arm64/mm/dump.c

@@ -389,7 +389,7 @@ void ptdump_check_wx(void)
 		.check_wx = true,
 	};
 
-	walk_pgd(&st, &init_mm, 0);
+	walk_pgd(&st, &init_mm, VA_START);
 	note_page(&st, 0, 0, 0);
 	if (st.wx_pages || st.uxn_pages)
 		pr_warn("Checked W+X mappings: FAILED, %lu W+X pages found, %lu non-UXN pages found\n",

arch/arm64/mm/fault.c

@@ -574,7 +574,6 @@ static int do_sea(unsigned long addr, unsigned int esr, struct pt_regs *regs)
 {
 	struct siginfo info;
 	const struct fault_info *inf;
-	int ret = 0;
 
 	inf = esr_to_fault_info(esr);
 	pr_err("Synchronous External Abort: %s (0x%08x) at 0x%016lx\n",
@@ -589,7 +588,7 @@ static int do_sea(unsigned long addr, unsigned int esr, struct pt_regs *regs)
 		if (interrupts_enabled(regs))
 			nmi_enter();
 
-		ret = ghes_notify_sea();
+		ghes_notify_sea();
 
 		if (interrupts_enabled(regs))
 			nmi_exit();
@@ -604,7 +603,7 @@ static int do_sea(unsigned long addr, unsigned int esr, struct pt_regs *regs)
 		info.si_addr  = (void __user *)addr;
 	arm64_notify_die("", regs, &info, esr);
 
-	return ret;
+	return 0;
 }
 
 static const struct fault_info fault_info[] = {

arch/arm64/mm/init.c

@@ -476,6 +476,8 @@ void __init arm64_memblock_init(void)
 
 	reserve_elfcorehdr();
 
+	high_memory = __va(memblock_end_of_DRAM() - 1) + 1;
+
 	dma_contiguous_reserve(arm64_dma_phys_limit);
 
 	memblock_allow_resize();
@@ -502,7 +504,6 @@ void __init bootmem_init(void)
 	sparse_init();
 	zone_sizes_init(min, max);
 
-	high_memory = __va((max << PAGE_SHIFT) - 1) + 1;
 	memblock_dump_all();
 }
 

arch/riscv/include/asm/barrier.h

@@ -38,6 +38,25 @@
 #define smp_rmb()	RISCV_FENCE(r,r)
 #define smp_wmb()	RISCV_FENCE(w,w)
 
+/*
+ * This is a very specific barrier: it's currently only used in two places in
+ * the kernel, both in the scheduler.  See include/linux/spinlock.h for the two
+ * orderings it guarantees, but the "critical section is RCsc" guarantee
+ * mandates a barrier on RISC-V.  The sequence looks like:
+ *
+ *    lr.aq lock
+ *    sc    lock <= LOCKED
+ *    smp_mb__after_spinlock()
+ *    // critical section
+ *    lr    lock
+ *    sc.rl lock <= UNLOCKED
+ *
+ * The AQ/RL pair provides a RCpc critical section, but there's not really any
+ * way we can take advantage of that here because the ordering is only enforced
+ * on that one lock.  Thus, we're just doing a full fence.
+ */
+#define smp_mb__after_spinlock()	RISCV_FENCE(rw,rw)
+
 #include <asm-generic/barrier.h>
 
 #endif /* __ASSEMBLY__ */

arch/riscv/kernel/setup.c

@@ -38,10 +38,6 @@
 #include <asm/tlbflush.h>
 #include <asm/thread_info.h>
 
-#ifdef CONFIG_HVC_RISCV_SBI
-#include <asm/hvc_riscv_sbi.h>
-#endif
-
 #ifdef CONFIG_DUMMY_CONSOLE
 struct screen_info screen_info = {
 	.orig_video_lines	= 30,
@@ -212,13 +208,6 @@ static void __init setup_bootmem(void)
 
 void __init setup_arch(char **cmdline_p)
 {
-#if defined(CONFIG_HVC_RISCV_SBI)
-	if (likely(early_console == NULL)) {
-		early_console = &riscv_sbi_early_console_dev;
-		register_console(early_console);
-	}
-#endif
-
 #ifdef CONFIG_CMDLINE_BOOL
 #ifdef CONFIG_CMDLINE_OVERRIDE
 	strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);

arch/riscv/kernel/sys_riscv.c

@@ -70,7 +70,7 @@ SYSCALL_DEFINE3(riscv_flush_icache, uintptr_t, start, uintptr_t, end,
 	bool local = (flags & SYS_RISCV_FLUSH_ICACHE_LOCAL) != 0;
 
 	/* Check the reserved flags. */
-	if (unlikely(flags & !SYS_RISCV_FLUSH_ICACHE_ALL))
+	if (unlikely(flags & ~SYS_RISCV_FLUSH_ICACHE_ALL))
 		return -EINVAL;
 
 	flush_icache_mm(mm, local);

arch/s390/include/asm/pgtable.h

@@ -1264,12 +1264,6 @@ static inline pud_t pud_mkwrite(pud_t pud)
 	return pud;
 }
 
-#define pud_write pud_write
-static inline int pud_write(pud_t pud)
-{
-	return (pud_val(pud) & _REGION3_ENTRY_WRITE) != 0;
-}
-
 static inline pud_t pud_mkclean(pud_t pud)
 {
 	if (pud_large(pud)) {

arch/s390/kernel/compat_linux.c

@@ -263,6 +263,7 @@ COMPAT_SYSCALL_DEFINE2(s390_setgroups16, int, gidsetsize, u16 __user *, grouplis
 		return retval;
 	}
 
+	groups_sort(group_info);
 	retval = set_current_groups(group_info);
 	put_group_info(group_info);
 

arch/sparc/mm/gup.c

@@ -75,7 +75,7 @@ static int gup_huge_pmd(pmd_t *pmdp, pmd_t pmd, unsigned long addr,
 	if (!(pmd_val(pmd) & _PAGE_VALID))
 		return 0;
 
-	if (!pmd_access_permitted(pmd, write))
+	if (write && !pmd_write(pmd))
 		return 0;
 
 	refs = 0;
@@ -114,7 +114,7 @@ static int gup_huge_pud(pud_t *pudp, pud_t pud, unsigned long addr,
 	if (!(pud_val(pud) & _PAGE_VALID))
 		return 0;
 
-	if (!pud_access_permitted(pud, write))
+	if (write && !pud_write(pud))
 		return 0;
 
 	refs = 0;

arch/um/include/asm/Kbuild

@@ -1,4 +1,5 @@
 generic-y += barrier.h
+generic-y += bpf_perf_event.h
 generic-y += bug.h
 generic-y += clkdev.h
 generic-y += current.h

arch/x86/Kconfig.debug

@@ -400,6 +400,7 @@ config UNWINDER_FRAME_POINTER
 config UNWINDER_GUESS
 	bool "Guess unwinder"
 	depends on EXPERT
+	depends on !STACKDEPOT
 	---help---
 	  This option enables the "guess" unwinder for unwinding kernel stack
 	  traces.  It scans the stack and reports every kernel text address it

arch/x86/boot/compressed/Makefile

@@ -80,6 +80,7 @@ vmlinux-objs-$(CONFIG_RANDOMIZE_BASE) += $(obj)/kaslr.o
 ifdef CONFIG_X86_64
 	vmlinux-objs-$(CONFIG_RANDOMIZE_BASE) += $(obj)/pagetable.o
 	vmlinux-objs-y += $(obj)/mem_encrypt.o
+	vmlinux-objs-y += $(obj)/pgtable_64.o
 endif
 
 $(obj)/eboot.o: KBUILD_CFLAGS += -fshort-wchar -mno-red-zone

arch/x86/boot/compressed/head_64.S

@@ -305,10 +305,18 @@ ENTRY(startup_64)
 	leaq	boot_stack_end(%rbx), %rsp
 
 #ifdef CONFIG_X86_5LEVEL
-	/* Check if 5-level paging has already enabled */
-	movq	%cr4, %rax
-	testl	$X86_CR4_LA57, %eax
-	jnz	lvl5
+	/*
+	 * Check if we need to enable 5-level paging.
+	 * RSI holds real mode data and need to be preserved across
+	 * a function call.
+	 */
+	pushq	%rsi
+	call	l5_paging_required
+	popq	%rsi
+
+	/* If l5_paging_required() returned zero, we're done here. */
+	cmpq	$0, %rax
+	je	lvl5
 
 	/*
 	 * At this point we are in long mode with 4-level paging enabled,

arch/x86/boot/compressed/misc.c

@@ -169,6 +169,16 @@ void __puthex(unsigned long value)
 	}
 }
 
+static bool l5_supported(void)
+{
+	/* Check if leaf 7 is supported. */
+	if (native_cpuid_eax(0) < 7)
+		return 0;
+
+	/* Check if la57 is supported. */
+	return native_cpuid_ecx(7) & (1 << (X86_FEATURE_LA57 & 31));
+}
+
 #if CONFIG_X86_NEED_RELOCS
 static void handle_relocations(void *output, unsigned long output_len,
 			       unsigned long virt_addr)
@@ -362,6 +372,12 @@ asmlinkage __visible void *extract_kernel(void *rmode, memptr heap,
 	console_init();
 	debug_putstr("early console in extract_kernel\n");
 
+	if (IS_ENABLED(CONFIG_X86_5LEVEL) && !l5_supported()) {
+		error("This linux kernel as configured requires 5-level paging\n"
+			"This CPU does not support the required 'cr4.la57' feature\n"
+			"Unable to boot - please use a kernel appropriate for your CPU\n");
+	}
+
 	free_mem_ptr     = heap;	/* Heap */
 	free_mem_end_ptr = heap + BOOT_HEAP_SIZE;
 

arch/x86/boot/compressed/pgtable_64.c

@@ -0,0 +1,28 @@
+#include <asm/processor.h>
+
+/*
+ * __force_order is used by special_insns.h asm code to force instruction
+ * serialization.
+ *
+ * It is not referenced from the code, but GCC < 5 with -fPIE would fail
+ * due to an undefined symbol. Define it to make these ancient GCCs work.
+ */
+unsigned long __force_order;
+
+int l5_paging_required(void)
+{
+	/* Check if leaf 7 is supported. */
+
+	if (native_cpuid_eax(0) < 7)
+		return 0;
+
+	/* Check if la57 is supported. */
+	if (!(native_cpuid_ecx(7) & (1 << (X86_FEATURE_LA57 & 31))))
+		return 0;
+
+	/* Check if 5-level paging has already been enabled. */
+	if (native_read_cr4() & X86_CR4_LA57)
+		return 0;
+
+	return 1;
+}

arch/x86/boot/genimage.sh

@@ -44,9 +44,9 @@ FDINITRD=$6
 
 # Make sure the files actually exist
 verify "$FBZIMAGE"
-verify "$MTOOLSRC"
 
 genbzdisk() {
+	verify "$MTOOLSRC"
 	mformat a:
 	syslinux $FIMAGE
 	echo "$KCMDLINE" | mcopy - a:syslinux.cfg
@@ -57,6 +57,7 @@ genbzdisk() {
 }
 
 genfdimage144() {
+	verify "$MTOOLSRC"
 	dd if=/dev/zero of=$FIMAGE bs=1024 count=1440 2> /dev/null
 	mformat v:
 	syslinux $FIMAGE
@@ -68,6 +69,7 @@ genfdimage144() {
 }
 
 genfdimage288() {
+	verify "$MTOOLSRC"
 	dd if=/dev/zero of=$FIMAGE bs=1024 count=2880 2> /dev/null
 	mformat w:
 	syslinux $FIMAGE

arch/x86/crypto/salsa20_glue.c

@@ -59,13 +59,6 @@ static int encrypt(struct blkcipher_desc *desc,
 
 	salsa20_ivsetup(ctx, walk.iv);
 
-	if (likely(walk.nbytes == nbytes))
-	{
-		salsa20_encrypt_bytes(ctx, walk.src.virt.addr,
-				      walk.dst.virt.addr, nbytes);
-		return blkcipher_walk_done(desc, &walk, 0);
-	}
-
 	while (walk.nbytes >= 64) {
 		salsa20_encrypt_bytes(ctx, walk.src.virt.addr,
 				      walk.dst.virt.addr,

arch/x86/include/asm/suspend_32.h

@@ -12,7 +12,13 @@
 
 /* image of the saved processor state */
 struct saved_context {
-	u16 es, fs, gs, ss;
+	/*
+	 * On x86_32, all segment registers, with the possible exception of
+	 * gs, are saved at kernel entry in pt_regs.
+	 */
+#ifdef CONFIG_X86_32_LAZY_GS
+	u16 gs;
+#endif
 	unsigned long cr0, cr2, cr3, cr4;
 	u64 misc_enable;
 	bool misc_enable_saved;

arch/x86/include/asm/suspend_64.h

@@ -20,8 +20,20 @@
  */
 struct saved_context {
 	struct pt_regs regs;
-	u16 ds, es, fs, gs, ss;
-	unsigned long gs_base, gs_kernel_base, fs_base;
+
+	/*
+	 * User CS and SS are saved in current_pt_regs().  The rest of the
+	 * segment selectors need to be saved and restored here.
+	 */
+	u16 ds, es, fs, gs;
+
+	/*
+	 * Usermode FSBASE and GSBASE may not match the fs and gs selectors,
+	 * so we save them separately.  We save the kernelmode GSBASE to
+	 * restore percpu access after resume.
+	 */
+	unsigned long kernelmode_gs_base, usermode_gs_base, fs_base;
+
 	unsigned long cr0, cr2, cr3, cr4, cr8;
 	u64 misc_enable;
 	bool misc_enable_saved;
@@ -30,8 +42,7 @@ struct saved_context {
 	u16 gdt_pad; /* Unused */
 	struct desc_ptr gdt_desc;
 	u16 idt_pad;
-	u16 idt_limit;
-	unsigned long idt_base;
+	struct desc_ptr idt;
 	u16 ldt;
 	u16 tss;
 	unsigned long tr;

arch/x86/kernel/smpboot.c

@@ -106,7 +106,7 @@ EXPORT_SYMBOL(__max_logical_packages);
 static unsigned int logical_packages __read_mostly;
 
 /* Maximum number of SMT threads on any online core */
-int __max_smt_threads __read_mostly;
+int __read_mostly __max_smt_threads = 1;
 
 /* Flag to indicate if a complete sched domain rebuild is required */
 bool x86_topology_update;
@@ -1304,7 +1304,7 @@ void __init native_smp_cpus_done(unsigned int max_cpus)
 	 * Today neither Intel nor AMD support heterogenous systems so
 	 * extrapolate the boot cpu's data to all packages.
 	 */
-	ncpus = cpu_data(0).booted_cores * smp_num_siblings;
+	ncpus = cpu_data(0).booted_cores * topology_max_smt_threads();
 	__max_logical_packages = DIV_ROUND_UP(nr_cpu_ids, ncpus);
 	pr_info("Max logical packages: %u\n", __max_logical_packages);
 

arch/x86/lib/x86-opcode-map.txt

@@ -607,7 +607,7 @@ fb: psubq Pq,Qq | vpsubq Vx,Hx,Wx (66),(v1)
 fc: paddb Pq,Qq | vpaddb Vx,Hx,Wx (66),(v1)
 fd: paddw Pq,Qq | vpaddw Vx,Hx,Wx (66),(v1)
 fe: paddd Pq,Qq | vpaddd Vx,Hx,Wx (66),(v1)
-ff:
+ff: UD0
 EndTable
 
 Table: 3-byte opcode 1 (0x0f 0x38)
@@ -717,7 +717,7 @@ AVXcode: 2
 7e: vpermt2d/q Vx,Hx,Wx (66),(ev)
 7f: vpermt2ps/d Vx,Hx,Wx (66),(ev)
 80: INVEPT Gy,Mdq (66)
-81: INVPID Gy,Mdq (66)
+81: INVVPID Gy,Mdq (66)
 82: INVPCID Gy,Mdq (66)
 83: vpmultishiftqb Vx,Hx,Wx (66),(ev)
 88: vexpandps/d Vpd,Wpd (66),(ev)
@@ -970,6 +970,15 @@ GrpTable: Grp9
 EndTable
 
 GrpTable: Grp10
+# all are UD1
+0: UD1
+1: UD1
+2: UD1
+3: UD1
+4: UD1
+5: UD1
+6: UD1
+7: UD1
 EndTable
 
 # Grp11A and Grp11B are expressed as Grp11 in Intel SDM

arch/x86/mm/ioremap.c

@@ -404,11 +404,11 @@ void iounmap(volatile void __iomem *addr)
 		return;
 	}
 
+	mmiotrace_iounmap(addr);
+
 	addr = (volatile void __iomem *)
 		(PAGE_MASK & (unsigned long __force)addr);
 
-	mmiotrace_iounmap(addr);
-
 	/* Use the vm area unlocked, assuming the caller
 	   ensures there isn't another iounmap for the same address
 	   in parallel. Reuse of the virtual address is prevented by

arch/x86/mm/kmmio.c

@@ -435,17 +435,18 @@ int register_kmmio_probe(struct kmmio_probe *p)
 	unsigned long flags;
 	int ret = 0;
 	unsigned long size = 0;
+	unsigned long addr = p->addr & PAGE_MASK;
 	const unsigned long size_lim = p->len + (p->addr & ~PAGE_MASK);
 	unsigned int l;
 	pte_t *pte;
 
 	spin_lock_irqsave(&kmmio_lock, flags);
-	if (get_kmmio_probe(p->addr)) {
+	if (get_kmmio_probe(addr)) {
 		ret = -EEXIST;
 		goto out;
 	}
 
-	pte = lookup_address(p->addr, &l);
+	pte = lookup_address(addr, &l);
 	if (!pte) {
 		ret = -EINVAL;
 		goto out;
@@ -454,7 +455,7 @@ int register_kmmio_probe(struct kmmio_probe *p)
 	kmmio_count++;
 	list_add_rcu(&p->list, &kmmio_probes);
 	while (size < size_lim) {
-		if (add_kmmio_fault_page(p->addr + size))
+		if (add_kmmio_fault_page(addr + size))
 			pr_err("Unable to set page fault.\n");
 		size += page_level_size(l);
 	}
@@ -528,19 +529,20 @@ void unregister_kmmio_probe(struct kmmio_probe *p)
 {
 	unsigned long flags;
 	unsigned long size = 0;
+	unsigned long addr = p->addr & PAGE_MASK;
 	const unsigned long size_lim = p->len + (p->addr & ~PAGE_MASK);
 	struct kmmio_fault_page *release_list = NULL;
 	struct kmmio_delayed_release *drelease;
 	unsigned int l;
 	pte_t *pte;
 
-	pte = lookup_address(p->addr, &l);
+	pte = lookup_address(addr, &l);
 	if (!pte)
 		return;
 
 	spin_lock_irqsave(&kmmio_lock, flags);
 	while (size < size_lim) {
-		release_kmmio_fault_page(p->addr + size, &release_list);
+		release_kmmio_fault_page(addr + size, &release_list);
 		size += page_level_size(l);
 	}
 	list_del_rcu(&p->list);

arch/x86/pci/fixup.c

@@ -665,6 +665,16 @@ static void pci_amd_enable_64bit_bar(struct pci_dev *dev)
 	unsigned i;
 	u32 base, limit, high;
 	struct resource *res, *conflict;
+	struct pci_dev *other;
+
+	/* Check that we are the only device of that type */
+	other = pci_get_device(dev->vendor, dev->device, NULL);
+	if (other != dev ||
+	    (other = pci_get_device(dev->vendor, dev->device, other))) {
+		/* This is a multi-socket system, don't touch it for now */
+		pci_dev_put(other);
+		return;
+	}
 
 	for (i = 0; i < 8; i++) {
 		pci_read_config_dword(dev, AMD_141b_MMIO_BASE(i), &base);
@@ -696,8 +706,13 @@ static void pci_amd_enable_64bit_bar(struct pci_dev *dev)
 	res->end = 0xfd00000000ull - 1;
 
 	/* Just grab the free area behind system memory for this */
-	while ((conflict = request_resource_conflict(&iomem_resource, res)))
+	while ((conflict = request_resource_conflict(&iomem_resource, res))) {
+		if (conflict->end >= res->end) {
+			kfree(res);
+			return;
+		}
 		res->start = conflict->end + 1;
+	}
 
 	dev_info(&dev->dev, "adding root bus resource %pR\n", res);
 
@@ -714,10 +729,10 @@ static void pci_amd_enable_64bit_bar(struct pci_dev *dev)
 
 	pci_bus_add_resource(dev->bus, res, 0);
 }
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AMD, 0x1401, pci_amd_enable_64bit_bar);
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AMD, 0x141b, pci_amd_enable_64bit_bar);
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AMD, 0x1571, pci_amd_enable_64bit_bar);
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AMD, 0x15b1, pci_amd_enable_64bit_bar);
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AMD, 0x1601, pci_amd_enable_64bit_bar);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x1401, pci_amd_enable_64bit_bar);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x141b, pci_amd_enable_64bit_bar);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x1571, pci_amd_enable_64bit_bar);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x15b1, pci_amd_enable_64bit_bar);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x1601, pci_amd_enable_64bit_bar);
 
 #endif

arch/x86/power/cpu.c

@@ -82,12 +82,8 @@ static void __save_processor_state(struct saved_context *ctxt)
 	/*
 	 * descriptor tables
 	 */
-#ifdef CONFIG_X86_32
 	store_idt(&ctxt->idt);
-#else
-/* CONFIG_X86_64 */
-	store_idt((struct desc_ptr *)&ctxt->idt_limit);
-#endif
+
 	/*
 	 * We save it here, but restore it only in the hibernate case.
 	 * For ACPI S3 resume, this is loaded via 'early_gdt_desc' in 64-bit
@@ -103,22 +99,18 @@ static void __save_processor_state(struct saved_context *ctxt)
 	/*
 	 * segment registers
 	 */
-#ifdef CONFIG_X86_32
-	savesegment(es, ctxt->es);
-	savesegment(fs, ctxt->fs);
+#ifdef CONFIG_X86_32_LAZY_GS
 	savesegment(gs, ctxt->gs);
-	savesegment(ss, ctxt->ss);
-#else
-/* CONFIG_X86_64 */
-	asm volatile ("movw %%ds, %0" : "=m" (ctxt->ds));
-	asm volatile ("movw %%es, %0" : "=m" (ctxt->es));
-	asm volatile ("movw %%fs, %0" : "=m" (ctxt->fs));
-	asm volatile ("movw %%gs, %0" : "=m" (ctxt->gs));
-	asm volatile ("movw %%ss, %0" : "=m" (ctxt->ss));
+#endif
+#ifdef CONFIG_X86_64
+	savesegment(gs, ctxt->gs);
+	savesegment(fs, ctxt->fs);
+	savesegment(ds, ctxt->ds);
+	savesegment(es, ctxt->es);
 
 	rdmsrl(MSR_FS_BASE, ctxt->fs_base);
-	rdmsrl(MSR_GS_BASE, ctxt->gs_base);
-	rdmsrl(MSR_KERNEL_GS_BASE, ctxt->gs_kernel_base);
+	rdmsrl(MSR_GS_BASE, ctxt->kernelmode_gs_base);
+	rdmsrl(MSR_KERNEL_GS_BASE, ctxt->usermode_gs_base);
 	mtrr_save_fixed_ranges(NULL);
 
 	rdmsrl(MSR_EFER, ctxt->efer);
@@ -178,6 +170,9 @@ static void fix_processor_context(void)
 	write_gdt_entry(desc, GDT_ENTRY_TSS, &tss, DESC_TSS);
 
 	syscall_init();				/* This sets MSR_*STAR and related */
+#else
+	if (boot_cpu_has(X86_FEATURE_SEP))
+		enable_sep_cpu();
 #endif
 	load_TR_desc();				/* This does ltr */
 	load_mm_ldt(current->active_mm);	/* This does lldt */
@@ -190,9 +185,12 @@ static void fix_processor_context(void)
 }
 
 /**
- *	__restore_processor_state - restore the contents of CPU registers saved
- *		by __save_processor_state()
- *	@ctxt - structure to load the registers contents from
+ * __restore_processor_state - restore the contents of CPU registers saved
+ *                             by __save_processor_state()
+ * @ctxt - structure to load the registers contents from
+ *
+ * The asm code that gets us here will have restored a usable GDT, although
+ * it will be pointing to the wrong alias.
  */
 static void notrace __restore_processor_state(struct saved_context *ctxt)
 {
@@ -215,57 +213,50 @@ static void notrace __restore_processor_state(struct saved_context *ctxt)
 	write_cr2(ctxt->cr2);
 	write_cr0(ctxt->cr0);
 
+	/* Restore the IDT. */
+	load_idt(&ctxt->idt);
+
 	/*
-	 * now restore the descriptor tables to their proper values
-	 * ltr is done i fix_processor_context().
+	 * Just in case the asm code got us here with the SS, DS, or ES
+	 * out of sync with the GDT, update them.
 	 */
-#ifdef CONFIG_X86_32
-	load_idt(&ctxt->idt);
-#else
-/* CONFIG_X86_64 */
-	load_idt((const struct desc_ptr *)&ctxt->idt_limit);
-#endif
+	loadsegment(ss, __KERNEL_DS);
+	loadsegment(ds, __USER_DS);
+	loadsegment(es, __USER_DS);
 
-#ifdef CONFIG_X86_64
 	/*
-	 * We need GSBASE restored before percpu access can work.
-	 * percpu access can happen in exception handlers or in complicated
-	 * helpers like load_gs_index().
+	 * Restore percpu access.  Percpu access can happen in exception
+	 * handlers or in complicated helpers like load_gs_index().
 	 */
-	wrmsrl(MSR_GS_BASE, ctxt->gs_base);
+#ifdef CONFIG_X86_64
+	wrmsrl(MSR_GS_BASE, ctxt->kernelmode_gs_base);
+#else
+	loadsegment(fs, __KERNEL_PERCPU);
+	loadsegment(gs, __KERNEL_STACK_CANARY);
 #endif
 
+	/* Restore the TSS, RO GDT, LDT, and usermode-relevant MSRs. */
 	fix_processor_context();
 
 	/*
-	 * Restore segment registers.  This happens after restoring the GDT
-	 * and LDT, which happen in fix_processor_context().
+	 * Now that we have descriptor tables fully restored and working
+	 * exception handling, restore the usermode segments.
 	 */
-#ifdef CONFIG_X86_32
+#ifdef CONFIG_X86_64
+	loadsegment(ds, ctxt->es);
 	loadsegment(es, ctxt->es);
 	loadsegment(fs, ctxt->fs);
-	loadsegment(gs, ctxt->gs);
-	loadsegment(ss, ctxt->ss);
-
-	/*
-	 * sysenter MSRs
-	 */
-	if (boot_cpu_has(X86_FEATURE_SEP))
-		enable_sep_cpu();
-#else
-/* CONFIG_X86_64 */
-	asm volatile ("movw %0, %%ds" :: "r" (ctxt->ds));
-	asm volatile ("movw %0, %%es" :: "r" (ctxt->es));
-	asm volatile ("movw %0, %%fs" :: "r" (ctxt->fs));
 	load_gs_index(ctxt->gs);
-	asm volatile ("movw %0, %%ss" :: "r" (ctxt->ss));
 
 	/*
-	 * Restore FSBASE and user GSBASE after reloading the respective
-	 * segment selectors.
+	 * Restore FSBASE and GSBASE after restoring the selectors, since
+	 * restoring the selectors clobbers the bases.  Keep in mind
+	 * that MSR_KERNEL_GS_BASE is horribly misnamed.
 	 */
 	wrmsrl(MSR_FS_BASE, ctxt->fs_base);
-	wrmsrl(MSR_KERNEL_GS_BASE, ctxt->gs_kernel_base);
+	wrmsrl(MSR_KERNEL_GS_BASE, ctxt->usermode_gs_base);
+#elif defined(CONFIG_X86_32_LAZY_GS)
+	loadsegment(gs, ctxt->gs);
 #endif
 
 	do_fpu_end();

arch/x86/xen/apic.c

@@ -57,7 +57,7 @@ static u32 xen_apic_read(u32 reg)
 		return 0;
 
 	if (reg == APIC_LVR)
-		return 0x10;
+		return 0x14;
 #ifdef CONFIG_X86_32
 	if (reg == APIC_LDR)
 		return SET_APIC_LOGICAL_ID(1UL << smp_processor_id());

crypto/af_alg.c

@@ -672,14 +672,15 @@ void af_alg_free_areq_sgls(struct af_alg_async_req *areq)
 	}
 
 	tsgl = areq->tsgl;
-	for_each_sg(tsgl, sg, areq->tsgl_entries, i) {
-		if (!sg_page(sg))
-			continue;
-		put_page(sg_page(sg));
-	}
+	if (tsgl) {
+		for_each_sg(tsgl, sg, areq->tsgl_entries, i) {
+			if (!sg_page(sg))
+				continue;
+			put_page(sg_page(sg));
+		}
 
-	if (areq->tsgl && areq->tsgl_entries)
 		sock_kfree_s(sk, tsgl, areq->tsgl_entries * sizeof(*tsgl));
+	}
 }
 EXPORT_SYMBOL_GPL(af_alg_free_areq_sgls);
 

crypto/algif_aead.c

@@ -503,6 +503,7 @@ static void aead_release(void *private)
 	struct aead_tfm *tfm = private;
 
 	crypto_free_aead(tfm->aead);
+	crypto_put_default_null_skcipher2();
 	kfree(tfm);
 }
 
@@ -535,7 +536,6 @@ static void aead_sock_destruct(struct sock *sk)
 	unsigned int ivlen = crypto_aead_ivsize(tfm);
 
 	af_alg_pull_tsgl(sk, ctx->used, NULL, 0);
-	crypto_put_default_null_skcipher2();
 	sock_kzfree_s(sk, ctx->iv, ivlen);
 	sock_kfree_s(sk, ctx, ctx->len);
 	af_alg_release_parent(sk);

crypto/hmac.c

@@ -195,11 +195,15 @@ static int hmac_create(struct crypto_template *tmpl, struct rtattr **tb)
 	salg = shash_attr_alg(tb[1], 0, 0);
 	if (IS_ERR(salg))
 		return PTR_ERR(salg);
+	alg = &salg->base;
 
+	/* The underlying hash algorithm must be unkeyed */
 	err = -EINVAL;
+	if (crypto_shash_alg_has_setkey(salg))
+		goto out_put_alg;
+
 	ds = salg->digestsize;
 	ss = salg->statesize;
-	alg = &salg->base;
 	if (ds > alg->cra_blocksize ||
 	    ss < alg->cra_blocksize)
 		goto out_put_alg;

crypto/rsa_helper.c

@@ -30,7 +30,7 @@ int rsa_get_n(void *context, size_t hdrlen, unsigned char tag,
 		return -EINVAL;
 
 	if (fips_enabled) {
-		while (!*ptr && n_sz) {
+		while (n_sz && !*ptr) {
 			ptr++;
 			n_sz--;
 		}

crypto/salsa20_generic.c

@@ -188,13 +188,6 @@ static int encrypt(struct blkcipher_desc *desc,
 
 	salsa20_ivsetup(ctx, walk.iv);
 
-	if (likely(walk.nbytes == nbytes))
-	{
-		salsa20_encrypt_bytes(ctx, walk.dst.virt.addr,
-				      walk.src.virt.addr, nbytes);
-		return blkcipher_walk_done(desc, &walk, 0);
-	}
-
 	while (walk.nbytes >= 64) {
 		salsa20_encrypt_bytes(ctx, walk.dst.virt.addr,
 				      walk.src.virt.addr,

crypto/shash.c

@@ -25,11 +25,12 @@
 
 static const struct crypto_type crypto_shash_type;
 
-static int shash_no_setkey(struct crypto_shash *tfm, const u8 *key,
-			   unsigned int keylen)
+int shash_no_setkey(struct crypto_shash *tfm, const u8 *key,
+		    unsigned int keylen)
 {
 	return -ENOSYS;
 }
+EXPORT_SYMBOL_GPL(shash_no_setkey);
 
 static int shash_setkey_unaligned(struct crypto_shash *tfm, const u8 *key,
 				  unsigned int keylen)

drivers/acpi/device_pm.c

@@ -1138,7 +1138,7 @@ int acpi_subsys_thaw_noirq(struct device *dev)
 	 * skip all of the subsequent "thaw" callbacks for the device.
 	 */
 	if (dev_pm_smart_suspend_and_suspended(dev)) {
-		dev->power.direct_complete = true;
+		dev_pm_skip_next_resume_phases(dev);
 		return 0;
 	}
 

drivers/ata/ahci_mtk.c

@@ -1,5 +1,5 @@
 /*
- * MeidaTek AHCI SATA driver
+ * MediaTek AHCI SATA driver
  *
  * Copyright (c) 2017 MediaTek Inc.
  * Author: Ryder Lee <ryder.lee@mediatek.com>
@@ -25,7 +25,7 @@
 #include <linux/reset.h>
 #include "ahci.h"
 
-#define DRV_NAME		"ahci"
+#define DRV_NAME		"ahci-mtk"
 
 #define SYS_CFG			0x14
 #define SYS_CFG_SATA_MSK	GENMASK(31, 30)
@@ -192,5 +192,5 @@ static struct platform_driver mtk_ahci_driver = {
 };
 module_platform_driver(mtk_ahci_driver);
 
-MODULE_DESCRIPTION("MeidaTek SATA AHCI Driver");
+MODULE_DESCRIPTION("MediaTek SATA AHCI Driver");
 MODULE_LICENSE("GPL v2");

drivers/ata/ahci_qoriq.c

@@ -35,6 +35,8 @@
 
 /* port register default value */
 #define AHCI_PORT_PHY_1_CFG	0xa003fffe
+#define AHCI_PORT_PHY2_CFG	0x28184d1f
+#define AHCI_PORT_PHY3_CFG	0x0e081509
 #define AHCI_PORT_TRANS_CFG	0x08000029
 #define AHCI_PORT_AXICC_CFG	0x3fffffff
 
@@ -183,6 +185,8 @@ static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv)
 		writel(readl(qpriv->ecc_addr) | ECC_DIS_ARMV8_CH2,
 				qpriv->ecc_addr);
 		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
+		writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
+		writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3);
 		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
 		if (qpriv->is_dmacoherent)
 			writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
@@ -190,6 +194,8 @@ static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv)
 
 	case AHCI_LS2080A:
 		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
+		writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
+		writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3);
 		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
 		if (qpriv->is_dmacoherent)
 			writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
@@ -201,6 +207,8 @@ static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv)
 		writel(readl(qpriv->ecc_addr) | ECC_DIS_ARMV8_CH2,
 				qpriv->ecc_addr);
 		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
+		writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
+		writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3);
 		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
 		if (qpriv->is_dmacoherent)
 			writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
@@ -212,6 +220,8 @@ static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv)
 		writel(readl(qpriv->ecc_addr) | ECC_DIS_LS1088A,
 		       qpriv->ecc_addr);
 		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
+		writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
+		writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3);
 		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
 		if (qpriv->is_dmacoherent)
 			writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
@@ -219,6 +229,8 @@ static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv)
 
 	case AHCI_LS2088A:
 		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
+		writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
+		writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3);
 		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
 		if (qpriv->is_dmacoherent)
 			writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);

drivers/ata/libata-core.c

@@ -3082,13 +3082,19 @@ int sata_down_spd_limit(struct ata_link *link, u32 spd_limit)
 	bit = fls(mask) - 1;
 	mask &= ~(1 << bit);
 
-	/* Mask off all speeds higher than or equal to the current
-	 * one.  Force 1.5Gbps if current SPD is not available.
+	/*
+	 * Mask off all speeds higher than or equal to the current one.  At
+	 * this point, if current SPD is not available and we previously
+	 * recorded the link speed from SStatus, the driver has already
+	 * masked off the highest bit so mask should already be 1 or 0.
+	 * Otherwise, we should not force 1.5Gbps on a link where we have
+	 * not previously recorded speed from SStatus.  Just return in this
+	 * case.
 	 */
 	if (spd > 1)
 		mask &= (1 << (spd - 1)) - 1;
 	else
-		mask &= 1;
+		return -EINVAL;
 
 	/* were we already at the bottom? */
 	if (!mask)

drivers/ata/pata_pdc2027x.c

@@ -82,7 +82,7 @@ static int pdc2027x_set_mode(struct ata_link *link, struct ata_device **r_failed
  * is issued to the device. However, if the controller clock is 133MHz,
  * the following tables must be used.
  */
-static struct pdc2027x_pio_timing {
+static const struct pdc2027x_pio_timing {
 	u8 value0, value1, value2;
 } pdc2027x_pio_timing_tbl[] = {
 	{ 0xfb, 0x2b, 0xac }, /* PIO mode 0 */
@@ -92,7 +92,7 @@ static struct pdc2027x_pio_timing {
 	{ 0x23, 0x09, 0x25 }, /* PIO mode 4, IORDY on, Prefetch off */
 };
 
-static struct pdc2027x_mdma_timing {
+static const struct pdc2027x_mdma_timing {
 	u8 value0, value1;
 } pdc2027x_mdma_timing_tbl[] = {
 	{ 0xdf, 0x5f }, /* MDMA mode 0 */
@@ -100,7 +100,7 @@ static struct pdc2027x_mdma_timing {
 	{ 0x69, 0x25 }, /* MDMA mode 2 */
 };
 
-static struct pdc2027x_udma_timing {
+static const struct pdc2027x_udma_timing {
 	u8 value0, value1, value2;
 } pdc2027x_udma_timing_tbl[] = {
 	{ 0x4a, 0x0f, 0xd5 }, /* UDMA mode 0 */
@@ -649,7 +649,7 @@ static long pdc_detect_pll_input_clock(struct ata_host *host)
  * @host: target ATA host
  * @board_idx: board identifier
  */
-static int pdc_hardware_init(struct ata_host *host, unsigned int board_idx)
+static void pdc_hardware_init(struct ata_host *host, unsigned int board_idx)
 {
 	long pll_clock;
 
@@ -665,8 +665,6 @@ static int pdc_hardware_init(struct ata_host *host, unsigned int board_idx)
 
 	/* Adjust PLL control register */
 	pdc_adjust_pll(host, pll_clock, board_idx);
-
-	return 0;
 }
 
 /**
@@ -753,8 +751,7 @@ static int pdc2027x_init_one(struct pci_dev *pdev,
 	//pci_enable_intx(pdev);
 
 	/* initialize adapter */
-	if (pdc_hardware_init(host, board_idx) != 0)
-		return -EIO;
+	pdc_hardware_init(host, board_idx);
 
 	pci_set_master(pdev);
 	return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
@@ -778,8 +775,7 @@ static int pdc2027x_reinit_one(struct pci_dev *pdev)
 	else
 		board_idx = PDC_UDMA_133;
 
-	if (pdc_hardware_init(host, board_idx))
-		return -EIO;
+	pdc_hardware_init(host, board_idx);
 
 	ata_host_resume(host);
 	return 0;

drivers/base/power/main.c

@@ -525,6 +525,21 @@ static void dpm_watchdog_clear(struct dpm_watchdog *wd)
 
 /*------------------------- Resume routines -------------------------*/
 
+/**
+ * dev_pm_skip_next_resume_phases - Skip next system resume phases for device.
+ * @dev: Target device.
+ *
+ * Make the core skip the "early resume" and "resume" phases for @dev.
+ *
+ * This function can be called by middle-layer code during the "noirq" phase of
+ * system resume if necessary, but not by device drivers.
+ */
+void dev_pm_skip_next_resume_phases(struct device *dev)
+{
+	dev->power.is_late_suspended = false;
+	dev->power.is_suspended = false;
+}
+
 /**
  * device_resume_noirq - Execute a "noirq resume" callback for given device.
  * @dev: Device to handle.

drivers/char/ipmi/ipmi_si_intf.c

@@ -199,6 +199,9 @@ struct smi_info {
 	/* The timer for this si. */
 	struct timer_list   si_timer;
 
+	/* This flag is set, if the timer can be set */
+	bool		    timer_can_start;
+
 	/* This flag is set, if the timer is running (timer_pending() isn't enough) */
 	bool		    timer_running;
 
@@ -355,6 +358,8 @@ out:
 
 static void smi_mod_timer(struct smi_info *smi_info, unsigned long new_val)
 {
+	if (!smi_info->timer_can_start)
+		return;
 	smi_info->last_timeout_jiffies = jiffies;
 	mod_timer(&smi_info->si_timer, new_val);
 	smi_info->timer_running = true;
@@ -374,21 +379,18 @@ static void start_new_msg(struct smi_info *smi_info, unsigned char *msg,
 	smi_info->handlers->start_transaction(smi_info->si_sm, msg, size);
 }
 
-static void start_check_enables(struct smi_info *smi_info, bool start_timer)
+static void start_check_enables(struct smi_info *smi_info)
 {
 	unsigned char msg[2];
 
 	msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
 	msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD;
 
-	if (start_timer)
-		start_new_msg(smi_info, msg, 2);
-	else
-		smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2);
+	start_new_msg(smi_info, msg, 2);
 	smi_info->si_state = SI_CHECKING_ENABLES;
 }
 
-static void start_clear_flags(struct smi_info *smi_info, bool start_timer)
+static void start_clear_flags(struct smi_info *smi_info)
 {
 	unsigned char msg[3];
 
@@ -397,10 +399,7 @@ static void start_clear_flags(struct smi_info *smi_info, bool start_timer)
 	msg[1] = IPMI_CLEAR_MSG_FLAGS_CMD;
 	msg[2] = WDT_PRE_TIMEOUT_INT;
 
-	if (start_timer)
-		start_new_msg(smi_info, msg, 3);
-	else
-		smi_info->handlers->start_transaction(smi_info->si_sm, msg, 3);
+	start_new_msg(smi_info, msg, 3);
 	smi_info->si_state = SI_CLEARING_FLAGS;
 }
 
@@ -435,11 +434,11 @@ static void start_getting_events(struct smi_info *smi_info)
  * Note that we cannot just use disable_irq(), since the interrupt may
  * be shared.
  */
-static inline bool disable_si_irq(struct smi_info *smi_info, bool start_timer)
+static inline bool disable_si_irq(struct smi_info *smi_info)
 {
 	if ((smi_info->io.irq) && (!smi_info->interrupt_disabled)) {
 		smi_info->interrupt_disabled = true;
-		start_check_enables(smi_info, start_timer);
+		start_check_enables(smi_info);
 		return true;
 	}
 	return false;
@@ -449,7 +448,7 @@ static inline bool enable_si_irq(struct smi_info *smi_info)
 {
 	if ((smi_info->io.irq) && (smi_info->interrupt_disabled)) {
 		smi_info->interrupt_disabled = false;
-		start_check_enables(smi_info, true);
+		start_check_enables(smi_info);
 		return true;
 	}
 	return false;
@@ -467,7 +466,7 @@ static struct ipmi_smi_msg *alloc_msg_handle_irq(struct smi_info *smi_info)
 
 	msg = ipmi_alloc_smi_msg();
 	if (!msg) {
-		if (!disable_si_irq(smi_info, true))
+		if (!disable_si_irq(smi_info))
 			smi_info->si_state = SI_NORMAL;
 	} else if (enable_si_irq(smi_info)) {
 		ipmi_free_smi_msg(msg);
@@ -483,7 +482,7 @@ retry:
 		/* Watchdog pre-timeout */
 		smi_inc_stat(smi_info, watchdog_pretimeouts);
 
-		start_clear_flags(smi_info, true);
+		start_clear_flags(smi_info);
 		smi_info->msg_flags &= ~WDT_PRE_TIMEOUT_INT;
 		if (smi_info->intf)
 			ipmi_smi_watchdog_pretimeout(smi_info->intf);
@@ -866,7 +865,7 @@ restart:
 		 * disable and messages disabled.
 		 */
 		if (smi_info->supports_event_msg_buff || smi_info->io.irq) {
-			start_check_enables(smi_info, true);
+			start_check_enables(smi_info);
 		} else {
 			smi_info->curr_msg = alloc_msg_handle_irq(smi_info);
 			if (!smi_info->curr_msg)
@@ -1167,6 +1166,7 @@ static int smi_start_processing(void       *send_info,
 
 	/* Set up the timer that drives the interface. */
 	timer_setup(&new_smi->si_timer, smi_timeout, 0);
+	new_smi->timer_can_start = true;
 	smi_mod_timer(new_smi, jiffies + SI_TIMEOUT_JIFFIES);
 
 	/* Try to claim any interrupts. */
@@ -1936,10 +1936,12 @@ static void check_for_broken_irqs(struct smi_info *smi_info)
 	check_set_rcv_irq(smi_info);
 }
 
-static inline void wait_for_timer_and_thread(struct smi_info *smi_info)
+static inline void stop_timer_and_thread(struct smi_info *smi_info)
 {
 	if (smi_info->thread != NULL)
 		kthread_stop(smi_info->thread);
+
+	smi_info->timer_can_start = false;
 	if (smi_info->timer_running)
 		del_timer_sync(&smi_info->si_timer);
 }
@@ -2152,7 +2154,7 @@ static int try_smi_init(struct smi_info *new_smi)
 	 * Start clearing the flags before we enable interrupts or the
 	 * timer to avoid racing with the timer.
 	 */
-	start_clear_flags(new_smi, false);
+	start_clear_flags(new_smi);
 
 	/*
 	 * IRQ is defined to be set when non-zero.  req_events will
@@ -2238,7 +2240,7 @@ out_err_remove_attrs:
 	dev_set_drvdata(new_smi->io.dev, NULL);
 
 out_err_stop_timer:
-	wait_for_timer_and_thread(new_smi);
+	stop_timer_and_thread(new_smi);
 
 out_err:
 	new_smi->interrupt_disabled = true;
@@ -2388,7 +2390,7 @@ static void cleanup_one_si(struct smi_info *to_clean)
 	 */
 	if (to_clean->io.irq_cleanup)
 		to_clean->io.irq_cleanup(&to_clean->io);
-	wait_for_timer_and_thread(to_clean);
+	stop_timer_and_thread(to_clean);
 
 	/*
 	 * Timeouts are stopped, now make sure the interrupts are off
@@ -2400,7 +2402,7 @@ static void cleanup_one_si(struct smi_info *to_clean)
 		schedule_timeout_uninterruptible(1);
 	}
 	if (to_clean->handlers)
-		disable_si_irq(to_clean, false);
+		disable_si_irq(to_clean);
 	while (to_clean->curr_msg || (to_clean->si_state != SI_NORMAL)) {
 		poll(to_clean);
 		schedule_timeout_uninterruptible(1);

drivers/char/ipmi/ipmi_si_parisc.c

@@ -10,6 +10,8 @@ static int __init ipmi_parisc_probe(struct parisc_device *dev)
 {
 	struct si_sm_io io;
 
+	memset(&io, 0, sizeof(io));
+
 	io.si_type	= SI_KCS;
 	io.addr_source	= SI_DEVICETREE;
 	io.addr_type	= IPMI_MEM_ADDR_SPACE;

drivers/char/ipmi/ipmi_si_pci.c

@@ -103,10 +103,13 @@ static int ipmi_pci_probe(struct pci_dev *pdev,
 	io.addr_source_cleanup = ipmi_pci_cleanup;
 	io.addr_source_data = pdev;
 
-	if (pci_resource_flags(pdev, 0) & IORESOURCE_IO)
+	if (pci_resource_flags(pdev, 0) & IORESOURCE_IO) {
 		io.addr_type = IPMI_IO_ADDR_SPACE;
-	else
+		io.io_setup = ipmi_si_port_setup;
+	} else {
 		io.addr_type = IPMI_MEM_ADDR_SPACE;
+		io.io_setup = ipmi_si_mem_setup;
+	}
 	io.addr_data = pci_resource_start(pdev, 0);
 
 	io.regspacing = ipmi_pci_probe_regspacing(&io);

drivers/dma/at_hdmac.c

@@ -708,7 +708,7 @@ atc_prep_dma_interleaved(struct dma_chan *chan,
 			 unsigned long flags)
 {
 	struct at_dma_chan	*atchan = to_at_dma_chan(chan);
-	struct data_chunk	*first = xt->sgl;
+	struct data_chunk	*first;
 	struct at_desc		*desc = NULL;
 	size_t			xfer_count;
 	unsigned int		dwidth;
@@ -720,6 +720,8 @@ atc_prep_dma_interleaved(struct dma_chan *chan,
 	if (unlikely(!xt || xt->numf != 1 || !xt->frame_size))
 		return NULL;
 
+	first = xt->sgl;
+
 	dev_info(chan2dev(chan),
 		 "%s: src=%pad, dest=%pad, numf=%d, frame_size=%d, flags=0x%lx\n",
 		__func__, &xt->src_start, &xt->dst_start, xt->numf,

drivers/dma/dma-jz4740.c

@@ -555,7 +555,7 @@ static int jz4740_dma_probe(struct platform_device *pdev)
 
 	ret = dma_async_device_register(dd);
 	if (ret)
-		return ret;
+		goto err_clk;
 
 	irq = platform_get_irq(pdev, 0);
 	ret = request_irq(irq, jz4740_dma_irq, 0, dev_name(&pdev->dev), dmadev);
@@ -568,6 +568,8 @@ static int jz4740_dma_probe(struct platform_device *pdev)
 
 err_unregister:
 	dma_async_device_unregister(dd);
+err_clk:
+	clk_disable_unprepare(dmadev->clk);
 	return ret;
 }
 

drivers/dma/dmatest.c

@@ -155,6 +155,12 @@ MODULE_PARM_DESC(run, "Run the test (default: false)");
 #define PATTERN_COUNT_MASK	0x1f
 #define PATTERN_MEMSET_IDX	0x01
 
+/* poor man's completion - we want to use wait_event_freezable() on it */
+struct dmatest_done {
+	bool			done;
+	wait_queue_head_t	*wait;
+};
+
 struct dmatest_thread {
 	struct list_head	node;
 	struct dmatest_info	*info;
@@ -165,6 +171,8 @@ struct dmatest_thread {
 	u8			**dsts;
 	u8			**udsts;
 	enum dma_transaction_type type;
+	wait_queue_head_t done_wait;
+	struct dmatest_done test_done;
 	bool			done;
 };
 
@@ -342,18 +350,25 @@ static unsigned int dmatest_verify(u8 **bufs, unsigned int start,
 	return error_count;
 }
 
-/* poor man's completion - we want to use wait_event_freezable() on it */
-struct dmatest_done {
-	bool			done;
-	wait_queue_head_t	*wait;
-};
 
 static void dmatest_callback(void *arg)
 {
 	struct dmatest_done *done = arg;
-
-	done->done = true;
-	wake_up_all(done->wait);
+	struct dmatest_thread *thread =
+		container_of(arg, struct dmatest_thread, done_wait);
+	if (!thread->done) {
+		done->done = true;
+		wake_up_all(done->wait);
+	} else {
+		/*
+		 * If thread->done, it means that this callback occurred
+		 * after the parent thread has cleaned up. This can
+		 * happen in the case that driver doesn't implement
+		 * the terminate_all() functionality and a dma operation
+		 * did not occur within the timeout period
+		 */
+		WARN(1, "dmatest: Kernel memory may be corrupted!!\n");
+	}
 }
 
 static unsigned int min_odd(unsigned int x, unsigned int y)
@@ -424,9 +439,8 @@ static unsigned long long dmatest_KBs(s64 runtime, unsigned long long len)
  */
 static int dmatest_func(void *data)
 {
-	DECLARE_WAIT_QUEUE_HEAD_ONSTACK(done_wait);
 	struct dmatest_thread	*thread = data;
-	struct dmatest_done	done = { .wait = &done_wait };
+	struct dmatest_done	*done = &thread->test_done;
 	struct dmatest_info	*info;
 	struct dmatest_params	*params;
 	struct dma_chan		*chan;
@@ -673,9 +687,9 @@ static int dmatest_func(void *data)
 			continue;
 		}
 
-		done.done = false;
+		done->done = false;
 		tx->callback = dmatest_callback;
-		tx->callback_param = &done;
+		tx->callback_param = done;
 		cookie = tx->tx_submit(tx);
 
 		if (dma_submit_error(cookie)) {
@@ -688,21 +702,12 @@ static int dmatest_func(void *data)
 		}
 		dma_async_issue_pending(chan);
 
-		wait_event_freezable_timeout(done_wait, done.done,
+		wait_event_freezable_timeout(thread->done_wait, done->done,
 					     msecs_to_jiffies(params->timeout));
 
 		status = dma_async_is_tx_complete(chan, cookie, NULL, NULL);
 
-		if (!done.done) {
-			/*
-			 * We're leaving the timed out dma operation with
-			 * dangling pointer to done_wait.  To make this
-			 * correct, we'll need to allocate wait_done for
-			 * each test iteration and perform "who's gonna
-			 * free it this time?" dancing.  For now, just
-			 * leave it dangling.
-			 */
-			WARN(1, "dmatest: Kernel stack may be corrupted!!\n");
+		if (!done->done) {
 			dmaengine_unmap_put(um);
 			result("test timed out", total_tests, src_off, dst_off,
 			       len, 0);
@@ -789,7 +794,7 @@ err_thread_type:
 		dmatest_KBs(runtime, total_len), ret);
 
 	/* terminate all transfers on specified channels */
-	if (ret)
+	if (ret || failed_tests)
 		dmaengine_terminate_all(chan);
 
 	thread->done = true;
@@ -849,6 +854,8 @@ static int dmatest_add_threads(struct dmatest_info *info,
 		thread->info = info;
 		thread->chan = dtc->chan;
 		thread->type = type;
+		thread->test_done.wait = &thread->done_wait;
+		init_waitqueue_head(&thread->done_wait);
 		smp_wmb();
 		thread->task = kthread_create(dmatest_func, thread, "%s-%s%u",
 				dma_chan_name(chan), op, i);

drivers/dma/fsl-edma.c

@@ -863,11 +863,11 @@ static void fsl_edma_irq_exit(
 	}
 }
 
-static void fsl_disable_clocks(struct fsl_edma_engine *fsl_edma)
+static void fsl_disable_clocks(struct fsl_edma_engine *fsl_edma, int nr_clocks)
 {
 	int i;
 
-	for (i = 0; i < DMAMUX_NR; i++)
+	for (i = 0; i < nr_clocks; i++)
 		clk_disable_unprepare(fsl_edma->muxclk[i]);
 }
 
@@ -904,25 +904,25 @@ static int fsl_edma_probe(struct platform_device *pdev)
 
 		res = platform_get_resource(pdev, IORESOURCE_MEM, 1 + i);
 		fsl_edma->muxbase[i] = devm_ioremap_resource(&pdev->dev, res);
-		if (IS_ERR(fsl_edma->muxbase[i]))
+		if (IS_ERR(fsl_edma->muxbase[i])) {
+			/* on error: disable all previously enabled clks */
+			fsl_disable_clocks(fsl_edma, i);
 			return PTR_ERR(fsl_edma->muxbase[i]);
+		}
 
 		sprintf(clkname, "dmamux%d", i);
 		fsl_edma->muxclk[i] = devm_clk_get(&pdev->dev, clkname);
 		if (IS_ERR(fsl_edma->muxclk[i])) {
 			dev_err(&pdev->dev, "Missing DMAMUX block clock.\n");
+			/* on error: disable all previously enabled clks */
+			fsl_disable_clocks(fsl_edma, i);
 			return PTR_ERR(fsl_edma->muxclk[i]);
 		}
 
 		ret = clk_prepare_enable(fsl_edma->muxclk[i]);
-		if (ret) {
-			/* disable only clks which were enabled on error */
-			for (; i >= 0; i--)
-				clk_disable_unprepare(fsl_edma->muxclk[i]);
-
-			dev_err(&pdev->dev, "DMAMUX clk block failed.\n");
-			return ret;
-		}
+		if (ret)
+			/* on error: disable all previously enabled clks */
+			fsl_disable_clocks(fsl_edma, i);
 
 	}
 
@@ -976,7 +976,7 @@ static int fsl_edma_probe(struct platform_device *pdev)
 	if (ret) {
 		dev_err(&pdev->dev,
 			"Can't register Freescale eDMA engine. (%d)\n", ret);
-		fsl_disable_clocks(fsl_edma);
+		fsl_disable_clocks(fsl_edma, DMAMUX_NR);
 		return ret;
 	}
 
@@ -985,7 +985,7 @@ static int fsl_edma_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev,
 			"Can't register Freescale eDMA of_dma. (%d)\n", ret);
 		dma_async_device_unregister(&fsl_edma->dma_dev);
-		fsl_disable_clocks(fsl_edma);
+		fsl_disable_clocks(fsl_edma, DMAMUX_NR);
 		return ret;
 	}
 
@@ -1015,7 +1015,7 @@ static int fsl_edma_remove(struct platform_device *pdev)
 	fsl_edma_cleanup_vchan(&fsl_edma->dma_dev);
 	of_dma_controller_free(np);
 	dma_async_device_unregister(&fsl_edma->dma_dev);
-	fsl_disable_clocks(fsl_edma);
+	fsl_disable_clocks(fsl_edma, DMAMUX_NR);
 
 	return 0;
 }

drivers/dma/ioat/init.c

@@ -390,7 +390,7 @@ static int ioat_dma_self_test(struct ioatdma_device *ioat_dma)
 	if (memcmp(src, dest, IOAT_TEST_SIZE)) {
 		dev_err(dev, "Self-test copy failed compare, disabling\n");
 		err = -ENODEV;
-		goto free_resources;
+		goto unmap_dma;
 	}
 
 unmap_dma:

drivers/gpu/drm/drm_connector.c

@@ -152,14 +152,23 @@ static void drm_connector_free(struct kref *kref)
 	connector->funcs->destroy(connector);
 }
 
-static void drm_connector_free_work_fn(struct work_struct *work)
+void drm_connector_free_work_fn(struct work_struct *work)
 {
-	struct drm_connector *connector =
-		container_of(work, struct drm_connector, free_work);
-	struct drm_device *dev = connector->dev;
+	struct drm_connector *connector, *n;
+	struct drm_device *dev =
+		container_of(work, struct drm_device, mode_config.connector_free_work);
+	struct drm_mode_config *config = &dev->mode_config;
+	unsigned long flags;
+	struct llist_node *freed;
 
-	drm_mode_object_unregister(dev, &connector->base);
-	connector->funcs->destroy(connector);
+	spin_lock_irqsave(&config->connector_list_lock, flags);
+	freed = llist_del_all(&config->connector_free_list);
+	spin_unlock_irqrestore(&config->connector_list_lock, flags);
+
+	llist_for_each_entry_safe(connector, n, freed, free_node) {
+		drm_mode_object_unregister(dev, &connector->base);
+		connector->funcs->destroy(connector);
+	}
 }
 
 /**
@@ -191,8 +200,6 @@ int drm_connector_init(struct drm_device *dev,
 	if (ret)
 		return ret;
 
-	INIT_WORK(&connector->free_work, drm_connector_free_work_fn);
-
 	connector->base.properties = &connector->properties;
 	connector->dev = dev;
 	connector->funcs = funcs;
@@ -547,10 +554,17 @@ EXPORT_SYMBOL(drm_connector_list_iter_begin);
  * actually release the connector when dropping our final reference.
  */
 static void
-drm_connector_put_safe(struct drm_connector *conn)
+__drm_connector_put_safe(struct drm_connector *conn)
 {
-	if (refcount_dec_and_test(&conn->base.refcount.refcount))
-		schedule_work(&conn->free_work);
+	struct drm_mode_config *config = &conn->dev->mode_config;
+
+	lockdep_assert_held(&config->connector_list_lock);
+
+	if (!refcount_dec_and_test(&conn->base.refcount.refcount))
+		return;
+
+	llist_add(&conn->free_node, &config->connector_free_list);
+	schedule_work(&config->connector_free_work);
 }
 
 /**
@@ -582,10 +596,10 @@ drm_connector_list_iter_next(struct drm_connector_list_iter *iter)
 
 		/* loop until it's not a zombie connector */
 	} while (!kref_get_unless_zero(&iter->conn->base.refcount));
-	spin_unlock_irqrestore(&config->connector_list_lock, flags);
 
 	if (old_conn)
-		drm_connector_put_safe(old_conn);
+		__drm_connector_put_safe(old_conn);
+	spin_unlock_irqrestore(&config->connector_list_lock, flags);
 
 	return iter->conn;
 }
@@ -602,9 +616,15 @@ EXPORT_SYMBOL(drm_connector_list_iter_next);
  */
 void drm_connector_list_iter_end(struct drm_connector_list_iter *iter)
 {
+	struct drm_mode_config *config = &iter->dev->mode_config;
+	unsigned long flags;
+
 	iter->dev = NULL;
-	if (iter->conn)
-		drm_connector_put_safe(iter->conn);
+	if (iter->conn) {
+		spin_lock_irqsave(&config->connector_list_lock, flags);
+		__drm_connector_put_safe(iter->conn);
+		spin_unlock_irqrestore(&config->connector_list_lock, flags);
+	}
 	lock_release(&connector_list_iter_dep_map, 0, _RET_IP_);
 }
 EXPORT_SYMBOL(drm_connector_list_iter_end);
@@ -1231,6 +1251,19 @@ int drm_mode_connector_update_edid_property(struct drm_connector *connector,
 	if (edid)
 		size = EDID_LENGTH * (1 + edid->extensions);
 
+	/* Set the display info, using edid if available, otherwise
+	 * reseting the values to defaults. This duplicates the work
+	 * done in drm_add_edid_modes, but that function is not
+	 * consistently called before this one in all drivers and the
+	 * computation is cheap enough that it seems better to
+	 * duplicate it rather than attempt to ensure some arbitrary
+	 * ordering of calls.
+	 */
+	if (edid)
+		drm_add_display_info(connector, edid);
+	else
+		drm_reset_display_info(connector);
+
 	drm_object_property_set_value(&connector->base,
 				      dev->mode_config.non_desktop_property,
 				      connector->display_info.non_desktop);

drivers/gpu/drm/drm_crtc_internal.h

@@ -142,6 +142,7 @@ int drm_mode_connector_set_obj_prop(struct drm_mode_object *obj,
 				    uint64_t value);
 int drm_connector_create_standard_properties(struct drm_device *dev);
 const char *drm_get_connector_force_name(enum drm_connector_force force);
+void drm_connector_free_work_fn(struct work_struct *work);
 
 /* IOCTL */
 int drm_mode_connector_property_set_ioctl(struct drm_device *dev,

drivers/gpu/drm/drm_edid.c

@@ -1731,7 +1731,7 @@ EXPORT_SYMBOL(drm_edid_duplicate);
  *
  * Returns true if @vendor is in @edid, false otherwise
  */
-static bool edid_vendor(struct edid *edid, const char *vendor)
+static bool edid_vendor(const struct edid *edid, const char *vendor)
 {
 	char edid_vendor[3];
 
@@ -1749,7 +1749,7 @@ static bool edid_vendor(struct edid *edid, const char *vendor)
  *
  * This tells subsequent routines what fixes they need to apply.
  */
-static u32 edid_get_quirks(struct edid *edid)
+static u32 edid_get_quirks(const struct edid *edid)
 {
 	const struct edid_quirk *quirk;
 	int i;
@@ -2813,7 +2813,7 @@ add_detailed_modes(struct drm_connector *connector, struct edid *edid,
 /*
  * Search EDID for CEA extension block.
  */
-static u8 *drm_find_edid_extension(struct edid *edid, int ext_id)
+static u8 *drm_find_edid_extension(const struct edid *edid, int ext_id)
 {
 	u8 *edid_ext = NULL;
 	int i;
@@ -2835,12 +2835,12 @@ static u8 *drm_find_edid_extension(struct edid *edid, int ext_id)
 	return edid_ext;
 }
 
-static u8 *drm_find_cea_extension(struct edid *edid)
+static u8 *drm_find_cea_extension(const struct edid *edid)
 {
 	return drm_find_edid_extension(edid, CEA_EXT);
 }
 
-static u8 *drm_find_displayid_extension(struct edid *edid)
+static u8 *drm_find_displayid_extension(const struct edid *edid)
 {
 	return drm_find_edid_extension(edid, DISPLAYID_EXT);
 }
@@ -4363,7 +4363,7 @@ drm_parse_hdmi_vsdb_video(struct drm_connector *connector, const u8 *db)
 }
 
 static void drm_parse_cea_ext(struct drm_connector *connector,
-			      struct edid *edid)
+			      const struct edid *edid)
 {
 	struct drm_display_info *info = &connector->display_info;
 	const u8 *edid_ext;
@@ -4397,11 +4397,33 @@ static void drm_parse_cea_ext(struct drm_connector *connector,
 	}
 }
 
-static void drm_add_display_info(struct drm_connector *connector,
-				 struct edid *edid, u32 quirks)
+/* A connector has no EDID information, so we've got no EDID to compute quirks from. Reset
+ * all of the values which would have been set from EDID
+ */
+void
+drm_reset_display_info(struct drm_connector *connector)
 {
 	struct drm_display_info *info = &connector->display_info;
 
+	info->width_mm = 0;
+	info->height_mm = 0;
+
+	info->bpc = 0;
+	info->color_formats = 0;
+	info->cea_rev = 0;
+	info->max_tmds_clock = 0;
+	info->dvi_dual = false;
+
+	info->non_desktop = 0;
+}
+EXPORT_SYMBOL_GPL(drm_reset_display_info);
+
+u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edid)
+{
+	struct drm_display_info *info = &connector->display_info;
+
+	u32 quirks = edid_get_quirks(edid);
+
 	info->width_mm = edid->width_cm * 10;
 	info->height_mm = edid->height_cm * 10;
 
@@ -4414,11 +4436,13 @@ static void drm_add_display_info(struct drm_connector *connector,
 
 	info->non_desktop = !!(quirks & EDID_QUIRK_NON_DESKTOP);
 
+	DRM_DEBUG_KMS("non_desktop set to %d\n", info->non_desktop);
+
 	if (edid->revision < 3)
-		return;
+		return quirks;
 
 	if (!(edid->input & DRM_EDID_INPUT_DIGITAL))
-		return;
+		return quirks;
 
 	drm_parse_cea_ext(connector, edid);
 
@@ -4438,7 +4462,7 @@ static void drm_add_display_info(struct drm_connector *connector,
 
 	/* Only defined for 1.4 with digital displays */
 	if (edid->revision < 4)
-		return;
+		return quirks;
 
 	switch (edid->input & DRM_EDID_DIGITAL_DEPTH_MASK) {
 	case DRM_EDID_DIGITAL_DEPTH_6:
@@ -4473,7 +4497,9 @@ static void drm_add_display_info(struct drm_connector *connector,
 		info->color_formats |= DRM_COLOR_FORMAT_YCRCB444;
 	if (edid->features & DRM_EDID_FEATURE_RGB_YCRCB422)
 		info->color_formats |= DRM_COLOR_FORMAT_YCRCB422;
+	return quirks;
 }
+EXPORT_SYMBOL_GPL(drm_add_display_info);
 
 static int validate_displayid(u8 *displayid, int length, int idx)
 {
@@ -4627,14 +4653,12 @@ int drm_add_edid_modes(struct drm_connector *connector, struct edid *edid)
 		return 0;
 	}
 
-	quirks = edid_get_quirks(edid);
-
 	/*
 	 * CEA-861-F adds ycbcr capability map block, for HDMI 2.0 sinks.
 	 * To avoid multiple parsing of same block, lets parse that map
 	 * from sink info, before parsing CEA modes.
 	 */
-	drm_add_display_info(connector, edid, quirks);
+	quirks = drm_add_display_info(connector, edid);
 
 	/*
 	 * EDID spec says modes should be preferred in this order:

drivers/gpu/drm/drm_lease.c

@@ -254,10 +254,10 @@ static struct drm_master *drm_lease_create(struct drm_master *lessor, struct idr
 	return lessee;
 
 out_lessee:
-	drm_master_put(&lessee);
-
 	mutex_unlock(&dev->mode_config.idr_mutex);
 
+	drm_master_put(&lessee);
+
 	return ERR_PTR(error);
 }
 

drivers/gpu/drm/drm_mm.c

@@ -575,21 +575,23 @@ EXPORT_SYMBOL(drm_mm_remove_node);
  */
 void drm_mm_replace_node(struct drm_mm_node *old, struct drm_mm_node *new)
 {
+	struct drm_mm *mm = old->mm;
+
 	DRM_MM_BUG_ON(!old->allocated);
 
 	*new = *old;
 
 	list_replace(&old->node_list, &new->node_list);
-	rb_replace_node(&old->rb, &new->rb, &old->mm->interval_tree.rb_root);
+	rb_replace_node_cached(&old->rb, &new->rb, &mm->interval_tree);
 
 	if (drm_mm_hole_follows(old)) {
 		list_replace(&old->hole_stack, &new->hole_stack);
 		rb_replace_node(&old->rb_hole_size,
 				&new->rb_hole_size,
-				&old->mm->holes_size);
+				&mm->holes_size);
 		rb_replace_node(&old->rb_hole_addr,
 				&new->rb_hole_addr,
-				&old->mm->holes_addr);
+				&mm->holes_addr);
 	}
 
 	old->allocated = false;

drivers/gpu/drm/drm_mode_config.c

@@ -382,6 +382,9 @@ void drm_mode_config_init(struct drm_device *dev)
 	ida_init(&dev->mode_config.connector_ida);
 	spin_lock_init(&dev->mode_config.connector_list_lock);
 
+	init_llist_head(&dev->mode_config.connector_free_list);
+	INIT_WORK(&dev->mode_config.connector_free_work, drm_connector_free_work_fn);
+
 	drm_mode_create_standard_properties(dev);
 
 	/* Just to be sure */
@@ -432,7 +435,7 @@ void drm_mode_config_cleanup(struct drm_device *dev)
 	}
 	drm_connector_list_iter_end(&conn_iter);
 	/* connector_iter drops references in a work item. */
-	flush_scheduled_work();
+	flush_work(&dev->mode_config.connector_free_work);
 	if (WARN_ON(!list_empty(&dev->mode_config.connector_list))) {
 		drm_connector_list_iter_begin(dev, &conn_iter);
 		drm_for_each_connector_iter(connector, &conn_iter)

drivers/gpu/drm/vc4/vc4_gem.c

@@ -888,8 +888,10 @@ vc4_complete_exec(struct drm_device *dev, struct vc4_exec_info *exec)
 	/* If we got force-completed because of GPU reset rather than
 	 * through our IRQ handler, signal the fence now.
 	 */
-	if (exec->fence)
+	if (exec->fence) {
 		dma_fence_signal(exec->fence);
+		dma_fence_put(exec->fence);
+	}
 
 	if (exec->bo) {
 		for (i = 0; i < exec->bo_count; i++) {

drivers/gpu/drm/vc4/vc4_irq.c

@@ -139,6 +139,7 @@ vc4_irq_finish_render_job(struct drm_device *dev)
 	list_move_tail(&exec->head, &vc4->job_done_list);
 	if (exec->fence) {
 		dma_fence_signal_locked(exec->fence);
+		dma_fence_put(exec->fence);
 		exec->fence = NULL;
 	}
 	vc4_submit_next_render_job(dev);

drivers/hwtracing/stm/ftrace.c

@@ -42,9 +42,11 @@ static struct stm_ftrace {
  * @len:	length of the data packet
  */
 static void notrace
-stm_ftrace_write(const void *buf, unsigned int len)
+stm_ftrace_write(struct trace_export *export, const void *buf, unsigned int len)
 {
-	stm_source_write(&stm_ftrace.data, STM_FTRACE_CHAN, buf, len);
+	struct stm_ftrace *stm = container_of(export, struct stm_ftrace, ftrace);
+
+	stm_source_write(&stm->data, STM_FTRACE_CHAN, buf, len);
 }
 
 static int stm_ftrace_link(struct stm_source_data *data)

drivers/i2c/busses/i2c-cht-wc.c

@@ -379,7 +379,7 @@ static int cht_wc_i2c_adap_i2c_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static struct platform_device_id cht_wc_i2c_adap_id_table[] = {
+static const struct platform_device_id cht_wc_i2c_adap_id_table[] = {
 	{ .name = "cht_wcove_ext_chgr" },
 	{},
 };

drivers/i2c/busses/i2c-piix4.c

@@ -983,7 +983,7 @@ static void piix4_adap_remove(struct i2c_adapter *adap)
 
 	if (adapdata->smba) {
 		i2c_del_adapter(adap);
-		if (adapdata->port == (0 << 1)) {
+		if (adapdata->port == (0 << piix4_port_shift_sb800)) {
 			release_region(adapdata->smba, SMBIOSIZE);
 			if (adapdata->sb800_main)
 				release_region(SB800_PIIX4_SMB_IDX, 2);

drivers/i2c/busses/i2c-stm32.h

@@ -1,10 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * i2c-stm32.h
  *
  * Copyright (C) M'boumba Cedric Madianga 2017
+ * Copyright (C) STMicroelectronics 2017
  * Author: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
  *
- * License terms:  GNU General Public License (GPL), version 2
  */
 
 #ifndef _I2C_STM32_H

drivers/i2c/busses/i2c-stm32f4.c

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Driver for STMicroelectronics STM32 I2C controller
  *
@@ -6,11 +7,11 @@
  * http://www.st.com/resource/en/reference_manual/DM00031020.pdf
  *
  * Copyright (C) M'boumba Cedric Madianga 2016
+ * Copyright (C) STMicroelectronics 2017
  * Author: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
  *
  * This driver is based on i2c-st.c
  *
- * License terms:  GNU General Public License (GPL), version 2
  */
 
 #include <linux/clk.h>

drivers/i2c/busses/i2c-stm32f7.c

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Driver for STMicroelectronics STM32F7 I2C controller
  *
@@ -7,11 +8,11 @@
  * http://www.st.com/resource/en/reference_manual/dm00124865.pdf
  *
  * Copyright (C) M'boumba Cedric Madianga 2017
+ * Copyright (C) STMicroelectronics 2017
  * Author: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
  *
  * This driver is based on i2c-stm32f4.c
  *
- * License terms:  GNU General Public License (GPL), version 2
  */
 #include <linux/clk.h>
 #include <linux/delay.h>

drivers/infiniband/core/cma.c

@@ -4458,7 +4458,7 @@ out:
 	return skb->len;
 }
 
-static const struct rdma_nl_cbs cma_cb_table[] = {
+static const struct rdma_nl_cbs cma_cb_table[RDMA_NL_RDMA_CM_NUM_OPS] = {
 	[RDMA_NL_RDMA_CM_ID_STATS] = { .dump = cma_get_id_stats},
 };
 

drivers/infiniband/core/device.c

@@ -1146,7 +1146,7 @@ struct net_device *ib_get_net_dev_by_params(struct ib_device *dev,
 }
 EXPORT_SYMBOL(ib_get_net_dev_by_params);
 
-static const struct rdma_nl_cbs ibnl_ls_cb_table[] = {
+static const struct rdma_nl_cbs ibnl_ls_cb_table[RDMA_NL_LS_NUM_OPS] = {
 	[RDMA_NL_LS_OP_RESOLVE] = {
 		.doit = ib_nl_handle_resolve_resp,
 		.flags = RDMA_NL_ADMIN_PERM,

drivers/infiniband/core/iwcm.c

@@ -80,7 +80,7 @@ const char *__attribute_const__ iwcm_reject_msg(int reason)
 }
 EXPORT_SYMBOL(iwcm_reject_msg);
 
-static struct rdma_nl_cbs iwcm_nl_cb_table[] = {
+static struct rdma_nl_cbs iwcm_nl_cb_table[RDMA_NL_IWPM_NUM_OPS] = {
 	[RDMA_NL_IWPM_REG_PID] = {.dump = iwpm_register_pid_cb},
 	[RDMA_NL_IWPM_ADD_MAPPING] = {.dump = iwpm_add_mapping_cb},
 	[RDMA_NL_IWPM_QUERY_MAPPING] = {.dump = iwpm_add_and_query_mapping_cb},

drivers/infiniband/core/nldev.c

@@ -303,7 +303,7 @@ out:	cb->args[0] = idx;
 	return skb->len;
 }
 
-static const struct rdma_nl_cbs nldev_cb_table[] = {
+static const struct rdma_nl_cbs nldev_cb_table[RDMA_NLDEV_NUM_OPS] = {
 	[RDMA_NLDEV_CMD_GET] = {
 		.doit = nldev_get_doit,
 		.dump = nldev_get_dumpit,

drivers/infiniband/core/security.c

@@ -739,8 +739,11 @@ int ib_mad_enforce_security(struct ib_mad_agent_private *map, u16 pkey_index)
 	if (!rdma_protocol_ib(map->agent.device, map->agent.port_num))
 		return 0;
 
-	if (map->agent.qp->qp_type == IB_QPT_SMI && !map->agent.smp_allowed)
-		return -EACCES;
+	if (map->agent.qp->qp_type == IB_QPT_SMI) {
+		if (!map->agent.smp_allowed)
+			return -EACCES;
+		return 0;
+	}
 
 	return ib_security_pkey_access(map->agent.device,
 				       map->agent.port_num,

drivers/infiniband/core/uverbs_cmd.c

@@ -1971,6 +1971,12 @@ static int modify_qp(struct ib_uverbs_file *file,
 		goto release_qp;
 	}
 
+	if ((cmd->base.attr_mask & IB_QP_ALT_PATH) &&
+	    !rdma_is_port_valid(qp->device, cmd->base.alt_port_num)) {
+		ret = -EINVAL;
+		goto release_qp;
+	}
+
 	attr->qp_state		  = cmd->base.qp_state;
 	attr->cur_qp_state	  = cmd->base.cur_qp_state;
 	attr->path_mtu		  = cmd->base.path_mtu;

drivers/infiniband/hw/cxgb4/cq.c

@@ -395,6 +395,11 @@ next_cqe:
 
 static int cqe_completes_wr(struct t4_cqe *cqe, struct t4_wq *wq)
 {
+	if (CQE_OPCODE(cqe) == C4IW_DRAIN_OPCODE) {
+		WARN_ONCE(1, "Unexpected DRAIN CQE qp id %u!\n", wq->sq.qid);
+		return 0;
+	}
+
 	if (CQE_OPCODE(cqe) == FW_RI_TERMINATE)
 		return 0;
 

drivers/infiniband/hw/cxgb4/qp.c

@@ -868,7 +868,12 @@ int c4iw_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
 
 	qhp = to_c4iw_qp(ibqp);
 	spin_lock_irqsave(&qhp->lock, flag);
-	if (t4_wq_in_error(&qhp->wq)) {
+
+	/*
+	 * If the qp has been flushed, then just insert a special
+	 * drain cqe.
+	 */
+	if (qhp->wq.flushed) {
 		spin_unlock_irqrestore(&qhp->lock, flag);
 		complete_sq_drain_wr(qhp, wr);
 		return err;
@@ -1011,7 +1016,12 @@ int c4iw_post_receive(struct ib_qp *ibqp, struct ib_recv_wr *wr,
 
 	qhp = to_c4iw_qp(ibqp);
 	spin_lock_irqsave(&qhp->lock, flag);
-	if (t4_wq_in_error(&qhp->wq)) {
+
+	/*
+	 * If the qp has been flushed, then just insert a special
+	 * drain cqe.
+	 */
+	if (qhp->wq.flushed) {
 		spin_unlock_irqrestore(&qhp->lock, flag);
 		complete_rq_drain_wr(qhp, wr);
 		return err;
@@ -1285,21 +1295,21 @@ static void __flush_qp(struct c4iw_qp *qhp, struct c4iw_cq *rchp,
 	spin_unlock_irqrestore(&rchp->lock, flag);
 
 	if (schp == rchp) {
-		if (t4_clear_cq_armed(&rchp->cq) &&
-		    (rq_flushed || sq_flushed)) {
+		if ((rq_flushed || sq_flushed) &&
+		    t4_clear_cq_armed(&rchp->cq)) {
 			spin_lock_irqsave(&rchp->comp_handler_lock, flag);
 			(*rchp->ibcq.comp_handler)(&rchp->ibcq,
 						   rchp->ibcq.cq_context);
 			spin_unlock_irqrestore(&rchp->comp_handler_lock, flag);
 		}
 	} else {
-		if (t4_clear_cq_armed(&rchp->cq) && rq_flushed) {
+		if (rq_flushed && t4_clear_cq_armed(&rchp->cq)) {
 			spin_lock_irqsave(&rchp->comp_handler_lock, flag);
 			(*rchp->ibcq.comp_handler)(&rchp->ibcq,
 						   rchp->ibcq.cq_context);
 			spin_unlock_irqrestore(&rchp->comp_handler_lock, flag);
 		}
-		if (t4_clear_cq_armed(&schp->cq) && sq_flushed) {
+		if (sq_flushed && t4_clear_cq_armed(&schp->cq)) {
 			spin_lock_irqsave(&schp->comp_handler_lock, flag);
 			(*schp->ibcq.comp_handler)(&schp->ibcq,
 						   schp->ibcq.cq_context);

drivers/infiniband/hw/mlx4/qp.c

@@ -666,6 +666,19 @@ static int set_qp_rss(struct mlx4_ib_dev *dev, struct mlx4_ib_rss *rss_ctx,
 		return (-EOPNOTSUPP);
 	}
 
+	if (ucmd->rx_hash_fields_mask & ~(MLX4_IB_RX_HASH_SRC_IPV4	|
+					  MLX4_IB_RX_HASH_DST_IPV4	|
+					  MLX4_IB_RX_HASH_SRC_IPV6	|
+					  MLX4_IB_RX_HASH_DST_IPV6	|
+					  MLX4_IB_RX_HASH_SRC_PORT_TCP	|
+					  MLX4_IB_RX_HASH_DST_PORT_TCP	|
+					  MLX4_IB_RX_HASH_SRC_PORT_UDP	|
+					  MLX4_IB_RX_HASH_DST_PORT_UDP)) {
+		pr_debug("RX Hash fields_mask has unsupported mask (0x%llx)\n",
+			 ucmd->rx_hash_fields_mask);
+		return (-EOPNOTSUPP);
+	}
+
 	if ((ucmd->rx_hash_fields_mask & MLX4_IB_RX_HASH_SRC_IPV4) &&
 	    (ucmd->rx_hash_fields_mask & MLX4_IB_RX_HASH_DST_IPV4)) {
 		rss_ctx->flags = MLX4_RSS_IPV4;
@@ -691,11 +704,11 @@ static int set_qp_rss(struct mlx4_ib_dev *dev, struct mlx4_ib_rss *rss_ctx,
 			return (-EOPNOTSUPP);
 		}
 
-		if (rss_ctx->flags & MLX4_RSS_IPV4) {
+		if (rss_ctx->flags & MLX4_RSS_IPV4)
 			rss_ctx->flags |= MLX4_RSS_UDP_IPV4;
-		} else if (rss_ctx->flags & MLX4_RSS_IPV6) {
+		if (rss_ctx->flags & MLX4_RSS_IPV6)
 			rss_ctx->flags |= MLX4_RSS_UDP_IPV6;
-		} else {
+		if (!(rss_ctx->flags & (MLX4_RSS_IPV6 | MLX4_RSS_IPV4))) {
 			pr_debug("RX Hash fields_mask is not supported - UDP must be set with IPv4 or IPv6\n");
 			return (-EOPNOTSUPP);
 		}
@@ -707,15 +720,14 @@ static int set_qp_rss(struct mlx4_ib_dev *dev, struct mlx4_ib_rss *rss_ctx,
 
 	if ((ucmd->rx_hash_fields_mask & MLX4_IB_RX_HASH_SRC_PORT_TCP) &&
 	    (ucmd->rx_hash_fields_mask & MLX4_IB_RX_HASH_DST_PORT_TCP)) {
-		if (rss_ctx->flags & MLX4_RSS_IPV4) {
+		if (rss_ctx->flags & MLX4_RSS_IPV4)
 			rss_ctx->flags |= MLX4_RSS_TCP_IPV4;
-		} else if (rss_ctx->flags & MLX4_RSS_IPV6) {
+		if (rss_ctx->flags & MLX4_RSS_IPV6)
 			rss_ctx->flags |= MLX4_RSS_TCP_IPV6;
-		} else {
+		if (!(rss_ctx->flags & (MLX4_RSS_IPV6 | MLX4_RSS_IPV4))) {
 			pr_debug("RX Hash fields_mask is not supported - TCP must be set with IPv4 or IPv6\n");
 			return (-EOPNOTSUPP);
 		}
-
 	} else if ((ucmd->rx_hash_fields_mask & MLX4_IB_RX_HASH_SRC_PORT_TCP) ||
 		   (ucmd->rx_hash_fields_mask & MLX4_IB_RX_HASH_DST_PORT_TCP)) {
 		pr_debug("RX Hash fields_mask is not supported - both TCP SRC and DST must be set\n");

drivers/infiniband/ulp/ipoib/ipoib_cm.c

@@ -1145,6 +1145,7 @@ static int ipoib_cm_tx_init(struct ipoib_cm_tx *p, u32 qpn,
 	noio_flag = memalloc_noio_save();
 	p->tx_ring = vzalloc(ipoib_sendq_size * sizeof(*p->tx_ring));
 	if (!p->tx_ring) {
+		memalloc_noio_restore(noio_flag);
 		ret = -ENOMEM;
 		goto err_tx;
 	}

drivers/md/dm-bufio.c

@@ -1611,7 +1611,8 @@ static unsigned long __scan(struct dm_bufio_client *c, unsigned long nr_to_scan,
 	int l;
 	struct dm_buffer *b, *tmp;
 	unsigned long freed = 0;
-	unsigned long count = nr_to_scan;
+	unsigned long count = c->n_buffers[LIST_CLEAN] +
+			      c->n_buffers[LIST_DIRTY];
 	unsigned long retain_target = get_retain_buffers(c);
 
 	for (l = 0; l < LIST_SIZE; l++) {
@@ -1647,8 +1648,11 @@ static unsigned long
 dm_bufio_shrink_count(struct shrinker *shrink, struct shrink_control *sc)
 {
 	struct dm_bufio_client *c = container_of(shrink, struct dm_bufio_client, shrinker);
+	unsigned long count = READ_ONCE(c->n_buffers[LIST_CLEAN]) +
+			      READ_ONCE(c->n_buffers[LIST_DIRTY]);
+	unsigned long retain_target = get_retain_buffers(c);
 
-	return READ_ONCE(c->n_buffers[LIST_CLEAN]) + READ_ONCE(c->n_buffers[LIST_DIRTY]);
+	return (count < retain_target) ? 0 : (count - retain_target);
 }
 
 /*

drivers/md/dm-cache-target.c

@@ -3472,18 +3472,18 @@ static int __init dm_cache_init(void)
 {
 	int r;
 
-	r = dm_register_target(&cache_target);
-	if (r) {
-		DMERR("cache target registration failed: %d", r);
-		return r;
-	}
-
 	migration_cache = KMEM_CACHE(dm_cache_migration, 0);
 	if (!migration_cache) {
 		dm_unregister_target(&cache_target);
 		return -ENOMEM;
 	}
 
+	r = dm_register_target(&cache_target);
+	if (r) {
+		DMERR("cache target registration failed: %d", r);
+		return r;
+	}
+
 	return 0;
 }
 

drivers/md/dm-mpath.c

@@ -457,6 +457,38 @@ do {									\
 		 dm_noflush_suspending((m)->ti));			\
 } while (0)
 
+/*
+ * Check whether bios must be queued in the device-mapper core rather
+ * than here in the target.
+ *
+ * If MPATHF_QUEUE_IF_NO_PATH and MPATHF_SAVED_QUEUE_IF_NO_PATH hold
+ * the same value then we are not between multipath_presuspend()
+ * and multipath_resume() calls and we have no need to check
+ * for the DMF_NOFLUSH_SUSPENDING flag.
+ */
+static bool __must_push_back(struct multipath *m, unsigned long flags)
+{
+	return ((test_bit(MPATHF_QUEUE_IF_NO_PATH, &flags) !=
+		 test_bit(MPATHF_SAVED_QUEUE_IF_NO_PATH, &flags)) &&
+		dm_noflush_suspending(m->ti));
+}
+
+/*
+ * Following functions use READ_ONCE to get atomic access to
+ * all m->flags to avoid taking spinlock
+ */
+static bool must_push_back_rq(struct multipath *m)
+{
+	unsigned long flags = READ_ONCE(m->flags);
+	return test_bit(MPATHF_QUEUE_IF_NO_PATH, &flags) || __must_push_back(m, flags);
+}
+
+static bool must_push_back_bio(struct multipath *m)
+{
+	unsigned long flags = READ_ONCE(m->flags);
+	return __must_push_back(m, flags);
+}
+
 /*
  * Map cloned requests (request-based multipath)
  */
@@ -478,7 +510,7 @@ static int multipath_clone_and_map(struct dm_target *ti, struct request *rq,
 		pgpath = choose_pgpath(m, nr_bytes);
 
 	if (!pgpath) {
-		if (test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags))
+		if (must_push_back_rq(m))
 			return DM_MAPIO_DELAY_REQUEUE;
 		dm_report_EIO(m);	/* Failed */
 		return DM_MAPIO_KILL;
@@ -553,7 +585,7 @@ static int __multipath_map_bio(struct multipath *m, struct bio *bio, struct dm_m
 	}
 
 	if (!pgpath) {
-		if (test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags))
+		if (must_push_back_bio(m))
 			return DM_MAPIO_REQUEUE;
 		dm_report_EIO(m);
 		return DM_MAPIO_KILL;
@@ -651,8 +683,7 @@ static int queue_if_no_path(struct multipath *m, bool queue_if_no_path,
 	assign_bit(MPATHF_SAVED_QUEUE_IF_NO_PATH, &m->flags,
 		   (save_old_value && test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags)) ||
 		   (!save_old_value && queue_if_no_path));
-	assign_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags,
-		   queue_if_no_path || dm_noflush_suspending(m->ti));
+	assign_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags, queue_if_no_path);
 	spin_unlock_irqrestore(&m->lock, flags);
 
 	if (!queue_if_no_path) {
@@ -1486,7 +1517,7 @@ static int multipath_end_io(struct dm_target *ti, struct request *clone,
 			fail_path(pgpath);
 
 		if (atomic_read(&m->nr_valid_paths) == 0 &&
-		    !test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags)) {
+		    !must_push_back_rq(m)) {
 			if (error == BLK_STS_IOERR)
 				dm_report_EIO(m);
 			/* complete with the original error */
@@ -1521,8 +1552,12 @@ static int multipath_end_io_bio(struct dm_target *ti, struct bio *clone,
 
 	if (atomic_read(&m->nr_valid_paths) == 0 &&
 	    !test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags)) {
-		dm_report_EIO(m);
-		*error = BLK_STS_IOERR;
+		if (must_push_back_bio(m)) {
+			r = DM_ENDIO_REQUEUE;
+		} else {
+			dm_report_EIO(m);
+			*error = BLK_STS_IOERR;
+		}
 		goto done;
 	}
 
@@ -1957,13 +1992,6 @@ static int __init dm_multipath_init(void)
 {
 	int r;
 
-	r = dm_register_target(&multipath_target);
-	if (r < 0) {
-		DMERR("request-based register failed %d", r);
-		r = -EINVAL;
-		goto bad_register_target;
-	}
-
 	kmultipathd = alloc_workqueue("kmpathd", WQ_MEM_RECLAIM, 0);
 	if (!kmultipathd) {
 		DMERR("failed to create workqueue kmpathd");
@@ -1985,13 +2013,20 @@ static int __init dm_multipath_init(void)
 		goto bad_alloc_kmpath_handlerd;
 	}
 
+	r = dm_register_target(&multipath_target);
+	if (r < 0) {
+		DMERR("request-based register failed %d", r);
+		r = -EINVAL;
+		goto bad_register_target;
+	}
+
 	return 0;
 
+bad_register_target:
+	destroy_workqueue(kmpath_handlerd);
 bad_alloc_kmpath_handlerd:
 	destroy_workqueue(kmultipathd);
 bad_alloc_kmultipathd:
-	dm_unregister_target(&multipath_target);
-bad_register_target:
 	return r;
 }
 

drivers/md/dm-snap.c

@@ -2411,24 +2411,6 @@ static int __init dm_snapshot_init(void)
 		return r;
 	}
 
-	r = dm_register_target(&snapshot_target);
-	if (r < 0) {
-		DMERR("snapshot target register failed %d", r);
-		goto bad_register_snapshot_target;
-	}
-
-	r = dm_register_target(&origin_target);
-	if (r < 0) {
-		DMERR("Origin target register failed %d", r);
-		goto bad_register_origin_target;
-	}
-
-	r = dm_register_target(&merge_target);
-	if (r < 0) {
-		DMERR("Merge target register failed %d", r);
-		goto bad_register_merge_target;
-	}
-
 	r = init_origin_hash();
 	if (r) {
 		DMERR("init_origin_hash failed.");
@@ -2449,19 +2431,37 @@ static int __init dm_snapshot_init(void)
 		goto bad_pending_cache;
 	}
 
+	r = dm_register_target(&snapshot_target);
+	if (r < 0) {
+		DMERR("snapshot target register failed %d", r);
+		goto bad_register_snapshot_target;
+	}
+
+	r = dm_register_target(&origin_target);
+	if (r < 0) {
+		DMERR("Origin target register failed %d", r);
+		goto bad_register_origin_target;
+	}
+
+	r = dm_register_target(&merge_target);
+	if (r < 0) {
+		DMERR("Merge target register failed %d", r);
+		goto bad_register_merge_target;
+	}
+
 	return 0;
 
-bad_pending_cache:
-	kmem_cache_destroy(exception_cache);
-bad_exception_cache:
-	exit_origin_hash();
-bad_origin_hash:
-	dm_unregister_target(&merge_target);
 bad_register_merge_target:
 	dm_unregister_target(&origin_target);
 bad_register_origin_target:
 	dm_unregister_target(&snapshot_target);
 bad_register_snapshot_target:
+	kmem_cache_destroy(pending_cache);
+bad_pending_cache:
+	kmem_cache_destroy(exception_cache);
+bad_exception_cache:
+	exit_origin_hash();
+bad_origin_hash:
 	dm_exception_store_exit();
 
 	return r;

drivers/md/dm-table.c

@@ -453,14 +453,15 @@ int dm_get_device(struct dm_target *ti, const char *path, fmode_t mode,
 
 		refcount_set(&dd->count, 1);
 		list_add(&dd->list, &t->devices);
+		goto out;
 
 	} else if (dd->dm_dev->mode != (mode | dd->dm_dev->mode)) {
 		r = upgrade_mode(dd, mode, t->md);
 		if (r)
 			return r;
-		refcount_inc(&dd->count);
 	}
-
+	refcount_inc(&dd->count);
+out:
 	*result = dd->dm_dev;
 	return 0;
 }

drivers/md/dm-thin.c

@@ -4355,30 +4355,28 @@ static struct target_type thin_target = {
 
 static int __init dm_thin_init(void)
 {
-	int r;
+	int r = -ENOMEM;
 
 	pool_table_init();
 
+	_new_mapping_cache = KMEM_CACHE(dm_thin_new_mapping, 0);
+	if (!_new_mapping_cache)
+		return r;
+
 	r = dm_register_target(&thin_target);
 	if (r)
-		return r;
+		goto bad_new_mapping_cache;
 
 	r = dm_register_target(&pool_target);
 	if (r)
-		goto bad_pool_target;
-
-	r = -ENOMEM;
-
-	_new_mapping_cache = KMEM_CACHE(dm_thin_new_mapping, 0);
-	if (!_new_mapping_cache)
-		goto bad_new_mapping_cache;
+		goto bad_thin_target;
 
 	return 0;
 
-bad_new_mapping_cache:
-	dm_unregister_target(&pool_target);
-bad_pool_target:
+bad_thin_target:
 	dm_unregister_target(&thin_target);
+bad_new_mapping_cache:
+	kmem_cache_destroy(_new_mapping_cache);
 
 	return r;
 }

drivers/misc/eeprom/at24.c

@@ -562,7 +562,7 @@ static ssize_t at24_eeprom_write_i2c(struct at24_data *at24, const char *buf,
 static int at24_read(void *priv, unsigned int off, void *val, size_t count)
 {
 	struct at24_data *at24 = priv;
-	struct i2c_client *client;
+	struct device *dev = &at24->client[0]->dev;
 	char *buf = val;
 	int ret;
 
@@ -572,11 +572,9 @@ static int at24_read(void *priv, unsigned int off, void *val, size_t count)
 	if (off + count > at24->chip.byte_len)
 		return -EINVAL;
 
-	client = at24_translate_offset(at24, &off);
-
-	ret = pm_runtime_get_sync(&client->dev);
+	ret = pm_runtime_get_sync(dev);
 	if (ret < 0) {
-		pm_runtime_put_noidle(&client->dev);
+		pm_runtime_put_noidle(dev);
 		return ret;
 	}
 
@@ -592,7 +590,7 @@ static int at24_read(void *priv, unsigned int off, void *val, size_t count)
 		status = at24->read_func(at24, buf, off, count);
 		if (status < 0) {
 			mutex_unlock(&at24->lock);
-			pm_runtime_put(&client->dev);
+			pm_runtime_put(dev);
 			return status;
 		}
 		buf += status;
@@ -602,7 +600,7 @@ static int at24_read(void *priv, unsigned int off, void *val, size_t count)
 
 	mutex_unlock(&at24->lock);
 
-	pm_runtime_put(&client->dev);
+	pm_runtime_put(dev);
 
 	return 0;
 }
@@ -610,7 +608,7 @@ static int at24_read(void *priv, unsigned int off, void *val, size_t count)
 static int at24_write(void *priv, unsigned int off, void *val, size_t count)
 {
 	struct at24_data *at24 = priv;
-	struct i2c_client *client;
+	struct device *dev = &at24->client[0]->dev;
 	char *buf = val;
 	int ret;
 
@@ -620,11 +618,9 @@ static int at24_write(void *priv, unsigned int off, void *val, size_t count)
 	if (off + count > at24->chip.byte_len)
 		return -EINVAL;
 
-	client = at24_translate_offset(at24, &off);
-
-	ret = pm_runtime_get_sync(&client->dev);
+	ret = pm_runtime_get_sync(dev);
 	if (ret < 0) {
-		pm_runtime_put_noidle(&client->dev);
+		pm_runtime_put_noidle(dev);
 		return ret;
 	}
 
@@ -640,7 +636,7 @@ static int at24_write(void *priv, unsigned int off, void *val, size_t count)
 		status = at24->write_func(at24, buf, off, count);
 		if (status < 0) {
 			mutex_unlock(&at24->lock);
-			pm_runtime_put(&client->dev);
+			pm_runtime_put(dev);
 			return status;
 		}
 		buf += status;
@@ -650,7 +646,7 @@ static int at24_write(void *priv, unsigned int off, void *val, size_t count)
 
 	mutex_unlock(&at24->lock);
 
-	pm_runtime_put(&client->dev);
+	pm_runtime_put(dev);
 
 	return 0;
 }
@@ -880,7 +876,7 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	at24->nvmem_config.reg_read = at24_read;
 	at24->nvmem_config.reg_write = at24_write;
 	at24->nvmem_config.priv = at24;
-	at24->nvmem_config.stride = 4;
+	at24->nvmem_config.stride = 1;
 	at24->nvmem_config.word_size = 1;
 	at24->nvmem_config.size = chip.byte_len;
 

drivers/misc/pti.c

@@ -32,7 +32,7 @@
 #include <linux/pci.h>
 #include <linux/mutex.h>
 #include <linux/miscdevice.h>
-#include <linux/pti.h>
+#include <linux/intel-pti.h>
 #include <linux/slab.h>
 #include <linux/uaccess.h>
 

drivers/mmc/core/card.h

@@ -75,9 +75,11 @@ struct mmc_fixup {
 #define EXT_CSD_REV_ANY (-1u)
 
 #define CID_MANFID_SANDISK      0x2
+#define CID_MANFID_ATP          0x9
 #define CID_MANFID_TOSHIBA      0x11
 #define CID_MANFID_MICRON       0x13
 #define CID_MANFID_SAMSUNG      0x15
+#define CID_MANFID_APACER       0x27
 #define CID_MANFID_KINGSTON     0x70
 #define CID_MANFID_HYNIX	0x90