mtd: rawnand: mtk: convert driver to nand_scan()

Two helpers have been added to the core to do all kind of controller
side configuration/initialization between the detection phase and the
final NAND scan. Implement these hooks so that we can convert the driver
to just use nand_scan() instead of the nand_scan_ident() +
nand_scan_tail() pair.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
Acked-by: Xiaolei Li <xiaolei.li@mediatek.com>

drivers/mtd/nand/raw/mtk_nand.c

@@ -1250,13 +1250,54 @@ static int mtk_nfc_ecc_init(struct device *dev, struct mtd_info *mtd)
 	return 0;
 }
 
+static int mtk_nfc_attach_chip(struct nand_chip *chip)
+{
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	struct device *dev = mtd->dev.parent;
+	struct mtk_nfc *nfc = nand_get_controller_data(chip);
+	struct mtk_nfc_nand_chip *mtk_nand = to_mtk_nand(chip);
+	int len;
+	int ret;
+
+	if (chip->options & NAND_BUSWIDTH_16) {
+		dev_err(dev, "16bits buswidth not supported");
+		return -EINVAL;
+	}
+
+	/* store bbt magic in page, cause OOB is not protected */
+	if (chip->bbt_options & NAND_BBT_USE_FLASH)
+		chip->bbt_options |= NAND_BBT_NO_OOB;
+
+	ret = mtk_nfc_ecc_init(dev, mtd);
+	if (ret)
+		return ret;
+
+	ret = mtk_nfc_set_spare_per_sector(&mtk_nand->spare_per_sector, mtd);
+	if (ret)
+		return ret;
+
+	mtk_nfc_set_fdm(&mtk_nand->fdm, mtd);
+	mtk_nfc_set_bad_mark_ctl(&mtk_nand->bad_mark, mtd);
+
+	len = mtd->writesize + mtd->oobsize;
+	nfc->buffer = devm_kzalloc(dev, len, GFP_KERNEL);
+	if (!nfc->buffer)
+		return  -ENOMEM;
+
+	return 0;
+}
+
+static const struct nand_controller_ops mtk_nfc_controller_ops = {
+	.attach_chip = mtk_nfc_attach_chip,
+};
+
 static int mtk_nfc_nand_chip_init(struct device *dev, struct mtk_nfc *nfc,
 				  struct device_node *np)
 {
 	struct mtk_nfc_nand_chip *chip;
 	struct nand_chip *nand;
 	struct mtd_info *mtd;
-	int nsels, len;
+	int nsels;
 	u32 tmp;
 	int ret;
 	int i;
@@ -1324,36 +1365,7 @@ static int mtk_nfc_nand_chip_init(struct device *dev, struct mtk_nfc *nfc,
 
 	mtk_nfc_hw_init(nfc);
 
-	ret = nand_scan_ident(mtd, nsels, NULL);
-	if (ret)
-		return ret;
-
-	/* store bbt magic in page, cause OOB is not protected */
-	if (nand->bbt_options & NAND_BBT_USE_FLASH)
-		nand->bbt_options |= NAND_BBT_NO_OOB;
-
-	ret = mtk_nfc_ecc_init(dev, mtd);
-	if (ret)
-		return -EINVAL;
-
-	if (nand->options & NAND_BUSWIDTH_16) {
-		dev_err(dev, "16bits buswidth not supported");
-		return -EINVAL;
-	}
-
-	ret = mtk_nfc_set_spare_per_sector(&chip->spare_per_sector, mtd);
-	if (ret)
-		return ret;
-
-	mtk_nfc_set_fdm(&chip->fdm, mtd);
-	mtk_nfc_set_bad_mark_ctl(&chip->bad_mark, mtd);
-
-	len = mtd->writesize + mtd->oobsize;
-	nfc->buffer = devm_kzalloc(dev, len, GFP_KERNEL);
-	if (!nfc->buffer)
-		return  -ENOMEM;
-
-	ret = nand_scan_tail(mtd);
+	ret = nand_scan(mtd, nsels);
 	if (ret)
 		return ret;
 
@@ -1443,6 +1455,7 @@ static int mtk_nfc_probe(struct platform_device *pdev)
 	spin_lock_init(&nfc->controller.lock);
 	init_waitqueue_head(&nfc->controller.wq);
 	INIT_LIST_HEAD(&nfc->chips);
+	nfc->controller.ops = &mtk_nfc_controller_ops;
 
 	/* probe defer if not ready */
 	nfc->ecc = of_mtk_ecc_get(np);