Merge tag 'iio-for-4.20b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second set of IIO new device support features and cleanup for the 4.20 cycle.

One merge commit in here to bring in the SPI_CS_WORD flag patches
that are also going via the SPI tree.

There are a few more fixes than normal for a pull targetting the
next merge window.  These are all long term issues and as we are late
in the cycle, they can wait.

New device support
* ad7606
  - Add support fo the ad7605-4 driver.  This driver is still in staging
    but is heading in the right direction to graduate, motivated partly
    by the requirement for this device support.
* ST VL53L0X ToF ranging sensor
  - New minimal driver. Interrupt support to follow.

New features

* SPI_CS_WORD optimization allows long transfers with the chip select
  toggled every 16bits.   There is a software fallback as well to let
  drivers not care about whether the hardware supports it.

* bh1750
  - Device tree support and bindings.
* ti-ads7950
  - Use the SPI_CS_WORD optmization to save lots of cpu cycles (assuming
    the hardware supports it)

Fixes and cleanups

* ad5064
  - Fix some long incorrect regulator error handling that preventing
    enabling the internal regulator.
* ad7606
  - The ad7606 doesn't actually have a 2.5V range and the values provided
    for scale have always been wrong.  Fix them.
  - Drop some wrong kernel-doc (things that don't exist)
  - Add missing kernel-doc
* at91-adc
  - Fixing missing ack of dataready on sysfs channel reads to avoid spurious
    interrupts.
  - Fix a wrong channel numbers in triggered_buffer_mode
* hmc5843
  - Fix incorrect part number in a comment.
* imx25-gcq
  - Fix a device_node leak in an error path.
* meson-saradc
  - Drop an unused and pointless define.
  - Use of_device_get_match_data instead of opencoding
  - Tidy up how meson_sar_adc_param is accessed.
  - Rework prior to adding some temperature sensor support.

* tag 'iio-for-4.20b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
  iio: ad5064: Fix regulator handling
  iio: adc: meson-saradc: use the address attribute from iio_chan_spec
  iio: adc: meson-saradc: do not use meson_sar_adc_iio_channels directly
  iio: adc: at91: fix wrong channel number in triggered buffer mode
  iio: adc: at91: fix acking DRDY irq on simple conversions
  iio: adc: meson-saradc: simplify access to meson_sar_adc_param
  iio: adc: meson-saradc: use of_device_get_match_data
  iio: adc: meson-saradc: remove #define MESON_SAR_ADC_DELTA_10_TS_C_SHIFT
  iio: light: bh1750: Add device tree support
  dt-bindings: iio: light: bh1750: Add device tree binding documentation
  staging:iio:ad7606: Add support for the ad7605-4
  iio: proximity: Add driver support for ST's VL53L0X ToF ranging sensor.
  staging:iio:ad7606: update structs with doc annotations
  iio: magnetometer: hmc5843: Fixed a comment error.
  iio: adc: imx25-gcq: Fix leak of device_node in mx25_gcq_setup_cfgs()
  iio: adc: ti-ads7950: use SPI_CS_WORD to reduce CPU usage
  spi: add software implementation for SPI_CS_WORD
  spi: add new SPI_CS_WORD flag
  staging:iio:ad7606: Remove incorrect kernel doc annotations
  staging:iio:ad7606: fix voltage scales

Documentation/devicetree/bindings/iio/light/bh1750.txt

@@ -0,0 +1,18 @@
+ROHM BH1750 - ALS, Ambient light sensor
+
+Required properties:
+
+- compatible: Must be one of:
+    "rohm,bh1710"
+    "rohm,bh1715"
+    "rohm,bh1721"
+    "rohm,bh1750"
+    "rohm,bh1751"
+- reg: the I2C address of the sensor
+
+Example:
+
+light-sensor@23 {
+	compatible = "rohm,bh1750";
+	reg = <0x23>;
+};

Documentation/devicetree/bindings/iio/proximity/vl53l0x.txt

@@ -0,0 +1,12 @@
+ST VL53L0X ToF ranging sensor
+
+Required properties:
+	- compatible: must be "st,vl53l0x"
+	- reg: i2c address where to find the device
+
+Example:
+
+vl53l0x@29 {
+	compatible = "st,vl53l0x";
+	reg = <0x29>;
+};

MAINTAINERS

@@ -13772,6 +13772,13 @@ L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	drivers/i2c/busses/i2c-stm32*
 
+ST VL53L0X ToF RANGER(I2C) IIO DRIVER
+M:	Song Qiang <songqiang1304521@gmail.com>
+L:	linux-iio@vger.kernel.org
+S:	Maintained
+F:	drivers/iio/proximity/vl53l0x-i2c.c
+F:	Documentation/devicetree/bindings/iio/proximity/vl53l0x.txt
+
 STABLE BRANCH
 M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 L:	stable@vger.kernel.org

drivers/iio/adc/at91_adc.c

@@ -248,12 +248,14 @@ static irqreturn_t at91_adc_trigger_handler(int irq, void *p)
 	struct iio_poll_func *pf = p;
 	struct iio_dev *idev = pf->indio_dev;
 	struct at91_adc_state *st = iio_priv(idev);
+	struct iio_chan_spec const *chan;
 	int i, j = 0;
 
 	for (i = 0; i < idev->masklength; i++) {
 		if (!test_bit(i, idev->active_scan_mask))
 			continue;
-		st->buffer[j] = at91_adc_readl(st, AT91_ADC_CHAN(st, i));
+		chan = idev->channels + i;
+		st->buffer[j] = at91_adc_readl(st, AT91_ADC_CHAN(st, chan->channel));
 		j++;
 	}
 
@@ -279,6 +281,8 @@ static void handle_adc_eoc_trigger(int irq, struct iio_dev *idev)
 		iio_trigger_poll(idev->trig);
 	} else {
 		st->last_value = at91_adc_readl(st, AT91_ADC_CHAN(st, st->chnb));
+		/* Needed to ACK the DRDY interruption */
+		at91_adc_readl(st, AT91_ADC_LCDR);
 		st->done = true;
 		wake_up_interruptible(&st->wq_data_avail);
 	}

drivers/iio/adc/fsl-imx25-gcq.c

@@ -209,12 +209,14 @@ static int mx25_gcq_setup_cfgs(struct platform_device *pdev,
 		ret = of_property_read_u32(child, "reg", &reg);
 		if (ret) {
 			dev_err(dev, "Failed to get reg property\n");
+			of_node_put(child);
 			return ret;
 		}
 
 		if (reg >= MX25_NUM_CFGS) {
 			dev_err(dev,
 				"reg value is greater than the number of available configuration registers\n");
+			of_node_put(child);
 			return -EINVAL;
 		}
 
@@ -228,6 +230,7 @@ static int mx25_gcq_setup_cfgs(struct platform_device *pdev,
 			if (IS_ERR(priv->vref[refp])) {
 				dev_err(dev, "Error, trying to use external voltage reference without a vref-%s regulator.",
 					mx25_gcq_refp_names[refp]);
+				of_node_put(child);
 				return PTR_ERR(priv->vref[refp]);
 			}
 			priv->channel_vref_mv[reg] =
@@ -240,6 +243,7 @@ static int mx25_gcq_setup_cfgs(struct platform_device *pdev,
 			break;
 		default:
 			dev_err(dev, "Invalid positive reference %d\n", refp);
+			of_node_put(child);
 			return -EINVAL;
 		}
 
@@ -254,10 +258,12 @@ static int mx25_gcq_setup_cfgs(struct platform_device *pdev,
 
 		if ((refp & MX25_ADCQ_CFG_REFP_MASK) != refp) {
 			dev_err(dev, "Invalid fsl,adc-refp property value\n");
+			of_node_put(child);
 			return -EINVAL;
 		}
 		if ((refn & MX25_ADCQ_CFG_REFN_MASK) != refn) {
 			dev_err(dev, "Invalid fsl,adc-refn property value\n");
+			of_node_put(child);
 			return -EINVAL;
 		}
 

drivers/iio/adc/meson_saradc.c

@@ -148,7 +148,6 @@
 	#define MESON_SAR_ADC_DELTA_10_TS_REVE1			BIT(26)
 	#define MESON_SAR_ADC_DELTA_10_CHAN1_DELTA_VALUE_MASK	GENMASK(25, 16)
 	#define MESON_SAR_ADC_DELTA_10_TS_REVE0			BIT(15)
-	#define MESON_SAR_ADC_DELTA_10_TS_C_SHIFT		11
 	#define MESON_SAR_ADC_DELTA_10_TS_C_MASK		GENMASK(14, 11)
 	#define MESON_SAR_ADC_DELTA_10_TS_VBG_EN		BIT(10)
 	#define MESON_SAR_ADC_DELTA_10_CHAN0_DELTA_VALUE_MASK	GENMASK(9, 0)
@@ -173,6 +172,7 @@
 	.type = IIO_VOLTAGE,						\
 	.indexed = 1,							\
 	.channel = _chan,						\
+	.address = _chan,						\
 	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |			\
 				BIT(IIO_CHAN_INFO_AVERAGE_RAW),		\
 	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |		\
@@ -235,7 +235,7 @@ struct meson_sar_adc_data {
 struct meson_sar_adc_priv {
 	struct regmap				*regmap;
 	struct regulator			*vref;
-	const struct meson_sar_adc_data		*data;
+	const struct meson_sar_adc_param	*param;
 	struct clk				*clkin;
 	struct clk				*core_clk;
 	struct clk				*adc_sel_clk;
@@ -280,7 +280,7 @@ static int meson_sar_adc_calib_val(struct iio_dev *indio_dev, int val)
 	/* use val_calib = scale * val_raw + offset calibration function */
 	tmp = div_s64((s64)val * priv->calibscale, MILLION) + priv->calibbias;
 
-	return clamp(tmp, 0, (1 << priv->data->param->resolution) - 1);
+	return clamp(tmp, 0, (1 << priv->param->resolution) - 1);
 }
 
 static int meson_sar_adc_wait_busy_clear(struct iio_dev *indio_dev)
@@ -324,15 +324,15 @@ static int meson_sar_adc_read_raw_sample(struct iio_dev *indio_dev,
 
 	regmap_read(priv->regmap, MESON_SAR_ADC_FIFO_RD, &regval);
 	fifo_chan = FIELD_GET(MESON_SAR_ADC_FIFO_RD_CHAN_ID_MASK, regval);
-	if (fifo_chan != chan->channel) {
+	if (fifo_chan != chan->address) {
 		dev_err(&indio_dev->dev,
-			"ADC FIFO entry belongs to channel %d instead of %d\n",
-			fifo_chan, chan->channel);
+			"ADC FIFO entry belongs to channel %d instead of %lu\n",
+			fifo_chan, chan->address);
 		return -EINVAL;
 	}
 
 	fifo_val = FIELD_GET(MESON_SAR_ADC_FIFO_RD_SAMPLE_VALUE_MASK, regval);
-	fifo_val &= GENMASK(priv->data->param->resolution - 1, 0);
+	fifo_val &= GENMASK(priv->param->resolution - 1, 0);
 	*val = meson_sar_adc_calib_val(indio_dev, fifo_val);
 
 	return 0;
@@ -344,16 +344,16 @@ static void meson_sar_adc_set_averaging(struct iio_dev *indio_dev,
 					enum meson_sar_adc_num_samples samples)
 {
 	struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
-	int val, channel = chan->channel;
+	int val, address = chan->address;
 
-	val = samples << MESON_SAR_ADC_AVG_CNTL_NUM_SAMPLES_SHIFT(channel);
+	val = samples << MESON_SAR_ADC_AVG_CNTL_NUM_SAMPLES_SHIFT(address);
 	regmap_update_bits(priv->regmap, MESON_SAR_ADC_AVG_CNTL,
-			   MESON_SAR_ADC_AVG_CNTL_NUM_SAMPLES_MASK(channel),
+			   MESON_SAR_ADC_AVG_CNTL_NUM_SAMPLES_MASK(address),
 			   val);
 
-	val = mode << MESON_SAR_ADC_AVG_CNTL_AVG_MODE_SHIFT(channel);
+	val = mode << MESON_SAR_ADC_AVG_CNTL_AVG_MODE_SHIFT(address);
 	regmap_update_bits(priv->regmap, MESON_SAR_ADC_AVG_CNTL,
-			   MESON_SAR_ADC_AVG_CNTL_AVG_MODE_MASK(channel), val);
+			   MESON_SAR_ADC_AVG_CNTL_AVG_MODE_MASK(address), val);
 }
 
 static void meson_sar_adc_enable_channel(struct iio_dev *indio_dev,
@@ -373,23 +373,23 @@ static void meson_sar_adc_enable_channel(struct iio_dev *indio_dev,
 
 	/* map channel index 0 to the channel which we want to read */
 	regval = FIELD_PREP(MESON_SAR_ADC_CHAN_LIST_ENTRY_MASK(0),
-			    chan->channel);
+			    chan->address);
 	regmap_update_bits(priv->regmap, MESON_SAR_ADC_CHAN_LIST,
 			   MESON_SAR_ADC_CHAN_LIST_ENTRY_MASK(0), regval);
 
 	regval = FIELD_PREP(MESON_SAR_ADC_DETECT_IDLE_SW_DETECT_MUX_MASK,
-			    chan->channel);
+			    chan->address);
 	regmap_update_bits(priv->regmap, MESON_SAR_ADC_DETECT_IDLE_SW,
 			   MESON_SAR_ADC_DETECT_IDLE_SW_DETECT_MUX_MASK,
 			   regval);
 
 	regval = FIELD_PREP(MESON_SAR_ADC_DETECT_IDLE_SW_IDLE_MUX_SEL_MASK,
-			    chan->channel);
+			    chan->address);
 	regmap_update_bits(priv->regmap, MESON_SAR_ADC_DETECT_IDLE_SW,
 			   MESON_SAR_ADC_DETECT_IDLE_SW_IDLE_MUX_SEL_MASK,
 			   regval);
 
-	if (chan->channel == 6)
+	if (chan->address == 6)
 		regmap_update_bits(priv->regmap, MESON_SAR_ADC_DELTA_10,
 				   MESON_SAR_ADC_DELTA_10_TEMP_SEL, 0);
 }
@@ -451,7 +451,7 @@ static int meson_sar_adc_lock(struct iio_dev *indio_dev)
 
 	mutex_lock(&indio_dev->mlock);
 
-	if (priv->data->param->has_bl30_integration) {
+	if (priv->param->has_bl30_integration) {
 		/* prevent BL30 from using the SAR ADC while we are using it */
 		regmap_update_bits(priv->regmap, MESON_SAR_ADC_DELAY,
 				MESON_SAR_ADC_DELAY_KERNEL_BUSY,
@@ -479,7 +479,7 @@ static void meson_sar_adc_unlock(struct iio_dev *indio_dev)
 {
 	struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
 
-	if (priv->data->param->has_bl30_integration)
+	if (priv->param->has_bl30_integration)
 		/* allow BL30 to use the SAR ADC again */
 		regmap_update_bits(priv->regmap, MESON_SAR_ADC_DELAY,
 				MESON_SAR_ADC_DELAY_KERNEL_BUSY, 0);
@@ -527,8 +527,8 @@ static int meson_sar_adc_get_sample(struct iio_dev *indio_dev,
 
 	if (ret) {
 		dev_warn(indio_dev->dev.parent,
-			 "failed to read sample for channel %d: %d\n",
-			 chan->channel, ret);
+			 "failed to read sample for channel %lu: %d\n",
+			 chan->address, ret);
 		return ret;
 	}
 
@@ -563,7 +563,7 @@ static int meson_sar_adc_iio_info_read_raw(struct iio_dev *indio_dev,
 		}
 
 		*val = ret / 1000;
-		*val2 = priv->data->param->resolution;
+		*val2 = priv->param->resolution;
 		return IIO_VAL_FRACTIONAL_LOG2;
 
 	case IIO_CHAN_INFO_CALIBBIAS:
@@ -636,7 +636,7 @@ static int meson_sar_adc_init(struct iio_dev *indio_dev)
 	 */
 	meson_sar_adc_set_chan7_mux(indio_dev, CHAN7_MUX_CH7_INPUT);
 
-	if (priv->data->param->has_bl30_integration) {
+	if (priv->param->has_bl30_integration) {
 		/*
 		 * leave sampling delay and the input clocks as configured by
 		 * BL30 to make sure BL30 gets the values it expects when
@@ -716,7 +716,7 @@ static int meson_sar_adc_init(struct iio_dev *indio_dev)
 		return ret;
 	}
 
-	ret = clk_set_rate(priv->adc_clk, priv->data->param->clock_rate);
+	ret = clk_set_rate(priv->adc_clk, priv->param->clock_rate);
 	if (ret) {
 		dev_err(indio_dev->dev.parent,
 			"failed to set adc clock rate\n");
@@ -729,7 +729,7 @@ static int meson_sar_adc_init(struct iio_dev *indio_dev)
 static void meson_sar_adc_set_bandgap(struct iio_dev *indio_dev, bool on_off)
 {
 	struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
-	const struct meson_sar_adc_param *param = priv->data->param;
+	const struct meson_sar_adc_param *param = priv->param;
 	u32 enable_mask;
 
 	if (param->bandgap_reg == MESON_SAR_ADC_REG11)
@@ -849,13 +849,13 @@ static int meson_sar_adc_calib(struct iio_dev *indio_dev)
 	int ret, nominal0, nominal1, value0, value1;
 
 	/* use points 25% and 75% for calibration */
-	nominal0 = (1 << priv->data->param->resolution) / 4;
-	nominal1 = (1 << priv->data->param->resolution) * 3 / 4;
+	nominal0 = (1 << priv->param->resolution) / 4;
+	nominal1 = (1 << priv->param->resolution) * 3 / 4;
 
 	meson_sar_adc_set_chan7_mux(indio_dev, CHAN7_MUX_VDD_DIV4);
 	usleep_range(10, 20);
 	ret = meson_sar_adc_get_sample(indio_dev,
-				       &meson_sar_adc_iio_channels[7],
+				       &indio_dev->channels[7],
 				       MEAN_AVERAGING, EIGHT_SAMPLES, &value0);
 	if (ret < 0)
 		goto out;
@@ -863,7 +863,7 @@ static int meson_sar_adc_calib(struct iio_dev *indio_dev)
 	meson_sar_adc_set_chan7_mux(indio_dev, CHAN7_MUX_VDD_MUL3_DIV4);
 	usleep_range(10, 20);
 	ret = meson_sar_adc_get_sample(indio_dev,
-				       &meson_sar_adc_iio_channels[7],
+				       &indio_dev->channels[7],
 				       MEAN_AVERAGING, EIGHT_SAMPLES, &value1);
 	if (ret < 0)
 		goto out;
@@ -979,11 +979,11 @@ MODULE_DEVICE_TABLE(of, meson_sar_adc_of_match);
 
 static int meson_sar_adc_probe(struct platform_device *pdev)
 {
+	const struct meson_sar_adc_data *match_data;
 	struct meson_sar_adc_priv *priv;
 	struct iio_dev *indio_dev;
 	struct resource *res;
 	void __iomem *base;
-	const struct of_device_id *match;
 	int irq, ret;
 
 	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*priv));
@@ -995,15 +995,15 @@ static int meson_sar_adc_probe(struct platform_device *pdev)
 	priv = iio_priv(indio_dev);
 	init_completion(&priv->done);
 
-	match = of_match_device(meson_sar_adc_of_match, &pdev->dev);
-	if (!match) {
-		dev_err(&pdev->dev, "failed to match device\n");
+	match_data = of_device_get_match_data(&pdev->dev);
+	if (!match_data) {
+		dev_err(&pdev->dev, "failed to get match data\n");
 		return -ENODEV;
 	}
 
-	priv->data = match->data;
+	priv->param = match_data->param;
 
-	indio_dev->name = priv->data->name;
+	indio_dev->name = match_data->name;
 	indio_dev->dev.parent = &pdev->dev;
 	indio_dev->dev.of_node = pdev->dev.of_node;
 	indio_dev->modes = INDIO_DIRECT_MODE;
@@ -1027,7 +1027,7 @@ static int meson_sar_adc_probe(struct platform_device *pdev)
 		return ret;
 
 	priv->regmap = devm_regmap_init_mmio(&pdev->dev, base,
-					     priv->data->param->regmap_config);
+					     priv->param->regmap_config);
 	if (IS_ERR(priv->regmap))
 		return PTR_ERR(priv->regmap);
 

drivers/iio/adc/ti-ads7950.c

@@ -51,7 +51,7 @@
 
 struct ti_ads7950_state {
 	struct spi_device	*spi;
-	struct spi_transfer	ring_xfer[TI_ADS7950_MAX_CHAN + 2];
+	struct spi_transfer	ring_xfer;
 	struct spi_transfer	scan_single_xfer[3];
 	struct spi_message	ring_msg;
 	struct spi_message	scan_single_msg;
@@ -65,11 +65,11 @@ struct ti_ads7950_state {
 	 * DMA (thus cache coherency maintenance) requires the
 	 * transfer buffers to live in their own cache lines.
 	 */
-	__be16	rx_buf[TI_ADS7950_MAX_CHAN + TI_ADS7950_TIMESTAMP_SIZE]
+	u16 rx_buf[TI_ADS7950_MAX_CHAN + 2 + TI_ADS7950_TIMESTAMP_SIZE]
 							____cacheline_aligned;
-	__be16	tx_buf[TI_ADS7950_MAX_CHAN];
-	__be16			single_tx;
-	__be16			single_rx;
+	u16 tx_buf[TI_ADS7950_MAX_CHAN + 2];
+	u16 single_tx;
+	u16 single_rx;
 
 };
 
@@ -108,7 +108,7 @@ enum ti_ads7950_id {
 		.realbits = bits,				\
 		.storagebits = 16,				\
 		.shift = 12 - (bits),				\
-		.endianness = IIO_BE,				\
+		.endianness = IIO_CPU,				\
 	},							\
 }
 
@@ -249,23 +249,14 @@ static int ti_ads7950_update_scan_mode(struct iio_dev *indio_dev,
 	len = 0;
 	for_each_set_bit(i, active_scan_mask, indio_dev->num_channels) {
 		cmd = TI_ADS7950_CR_WRITE | TI_ADS7950_CR_CHAN(i) | st->settings;
-		st->tx_buf[len++] = cpu_to_be16(cmd);
+		st->tx_buf[len++] = cmd;
 	}
 
 	/* Data for the 1st channel is not returned until the 3rd transfer */
-	len += 2;
-	for (i = 0; i < len; i++) {
-		if ((i + 2) < len)
-			st->ring_xfer[i].tx_buf = &st->tx_buf[i];
-		if (i >= 2)
-			st->ring_xfer[i].rx_buf = &st->rx_buf[i - 2];
-		st->ring_xfer[i].len = 2;
-		st->ring_xfer[i].cs_change = 1;
-	}
-	/* make sure last transfer's cs_change is not set */
-	st->ring_xfer[len - 1].cs_change = 0;
+	st->tx_buf[len++] = 0;
+	st->tx_buf[len++] = 0;
 
-	spi_message_init_with_transfers(&st->ring_msg, st->ring_xfer, len);
+	st->ring_xfer.len = len * 2;
 
 	return 0;
 }
@@ -281,7 +272,7 @@ static irqreturn_t ti_ads7950_trigger_handler(int irq, void *p)
 	if (ret < 0)
 		goto out;
 
-	iio_push_to_buffers_with_timestamp(indio_dev, st->rx_buf,
+	iio_push_to_buffers_with_timestamp(indio_dev, &st->rx_buf[2],
 					   iio_get_time_ns(indio_dev));
 
 out:
@@ -298,13 +289,13 @@ static int ti_ads7950_scan_direct(struct iio_dev *indio_dev, unsigned int ch)
 	mutex_lock(&indio_dev->mlock);
 
 	cmd = TI_ADS7950_CR_WRITE | TI_ADS7950_CR_CHAN(ch) | st->settings;
-	st->single_tx = cpu_to_be16(cmd);
+	st->single_tx = cmd;
 
 	ret = spi_sync(st->spi, &st->scan_single_msg);
 	if (ret)
 		goto out;
 
-	ret = be16_to_cpu(st->single_rx);
+	ret = st->single_rx;
 
 out:
 	mutex_unlock(&indio_dev->mlock);
@@ -378,6 +369,14 @@ static int ti_ads7950_probe(struct spi_device *spi)
 	const struct ti_ads7950_chip_info *info;
 	int ret;
 
+	spi->bits_per_word = 16;
+	spi->mode |= SPI_CS_WORD;
+	ret = spi_setup(spi);
+	if (ret < 0) {
+		dev_err(&spi->dev, "Error in spi setup\n");
+		return ret;
+	}
+
 	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
 	if (!indio_dev)
 		return -ENOMEM;
@@ -398,6 +397,16 @@ static int ti_ads7950_probe(struct spi_device *spi)
 	indio_dev->num_channels = info->num_channels;
 	indio_dev->info = &ti_ads7950_info;
 
+	/* build spi ring message */
+	spi_message_init(&st->ring_msg);
+
+	st->ring_xfer.tx_buf = &st->tx_buf[0];
+	st->ring_xfer.rx_buf = &st->rx_buf[0];
+	/* len will be set later */
+	st->ring_xfer.cs_change = true;
+
+	spi_message_add_tail(&st->ring_xfer, &st->ring_msg);
+
 	/*
 	 * Setup default message. The sample is read at the end of the first
 	 * transfer, then it takes one full cycle to convert the sample and one

drivers/iio/dac/ad5064.c

@@ -808,6 +808,40 @@ static int ad5064_set_config(struct ad5064_state *st, unsigned int val)
 	return ad5064_write(st, cmd, 0, val, 0);
 }
 
+static int ad5064_request_vref(struct ad5064_state *st, struct device *dev)
+{
+	unsigned int i;
+	int ret;
+
+	for (i = 0; i < ad5064_num_vref(st); ++i)
+		st->vref_reg[i].supply = ad5064_vref_name(st, i);
+
+	if (!st->chip_info->internal_vref)
+		return devm_regulator_bulk_get(dev, ad5064_num_vref(st),
+					       st->vref_reg);
+
+	/*
+	 * This assumes that when the regulator has an internal VREF
+	 * there is only one external VREF connection, which is
+	 * currently the case for all supported devices.
+	 */
+	st->vref_reg[0].consumer = devm_regulator_get_optional(dev, "vref");
+	if (!IS_ERR(st->vref_reg[0].consumer))
+		return 0;
+
+	ret = PTR_ERR(st->vref_reg[0].consumer);
+	if (ret != -ENODEV)
+		return ret;
+
+	/* If no external regulator was supplied use the internal VREF */
+	st->use_internal_vref = true;
+	ret = ad5064_set_config(st, AD5064_CONFIG_INT_VREF_ENABLE);
+	if (ret)
+		dev_err(dev, "Failed to enable internal vref: %d\n", ret);
+
+	return ret;
+}
+
 static int ad5064_probe(struct device *dev, enum ad5064_type type,
 			const char *name, ad5064_write_func write)
 {
@@ -828,22 +862,11 @@ static int ad5064_probe(struct device *dev, enum ad5064_type type,
 	st->dev = dev;
 	st->write = write;
 
-	for (i = 0; i < ad5064_num_vref(st); ++i)
-		st->vref_reg[i].supply = ad5064_vref_name(st, i);
+	ret = ad5064_request_vref(st, dev);
+	if (ret)
+		return ret;
 
-	ret = devm_regulator_bulk_get(dev, ad5064_num_vref(st),
-		st->vref_reg);
-	if (ret) {
-		if (!st->chip_info->internal_vref)
-			return ret;
-		st->use_internal_vref = true;
-		ret = ad5064_set_config(st, AD5064_CONFIG_INT_VREF_ENABLE);
-		if (ret) {
-			dev_err(dev, "Failed to enable internal vref: %d\n",
-				ret);
-			return ret;
-		}
-	} else {
+	if (!st->use_internal_vref) {
 		ret = regulator_bulk_enable(ad5064_num_vref(st), st->vref_reg);
 		if (ret)
 			return ret;

drivers/iio/light/bh1750.c

@@ -307,9 +307,20 @@ static const struct i2c_device_id bh1750_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, bh1750_id);
 
+static const struct of_device_id bh1750_of_match[] = {
+	{ .compatible = "rohm,bh1710", },
+	{ .compatible = "rohm,bh1715", },
+	{ .compatible = "rohm,bh1721", },
+	{ .compatible = "rohm,bh1750", },
+	{ .compatible = "rohm,bh1751", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, bh1750_of_match);
+
 static struct i2c_driver bh1750_driver = {
 	.driver = {
 		.name = "bh1750",
+		.of_match_table = bh1750_of_match,
 		.pm = &bh1750_pm_ops,
 	},
 	.probe = bh1750_probe,

drivers/iio/magnetometer/hmc5843.h

@@ -31,7 +31,7 @@ enum hmc5843_ids {
 };
 
 /**
- * struct hcm5843_data	- device specific data
+ * struct hmc5843_data	- device specific data
  * @dev:		actual device
  * @lock:		update and read regmap data
  * @regmap:		hardware access register maps

drivers/iio/proximity/Kconfig

@@ -92,4 +92,15 @@ config SRF08
 	  To compile this driver as a module, choose M here: the
 	  module will be called srf08.
 
+config VL53L0X_I2C
+	tristate "STMicroelectronics VL53L0X ToF ranger sensor (I2C)"
+	depends on I2C
+	help
+	  Say Y here to build a driver for STMicroelectronics VL53L0X
+	  ToF ranger sensors with i2c interface.
+	  This driver can be used to measure the distance of objects.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called vl53l0x-i2c.
+
 endmenu

drivers/iio/proximity/Makefile

@@ -11,3 +11,5 @@ obj-$(CONFIG_RFD77402)		+= rfd77402.o
 obj-$(CONFIG_SRF04)		+= srf04.o
 obj-$(CONFIG_SRF08)		+= srf08.o
 obj-$(CONFIG_SX9500)		+= sx9500.o
+obj-$(CONFIG_VL53L0X_I2C)	+= vl53l0x-i2c.o
+

drivers/iio/proximity/vl53l0x-i2c.c

@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Support for ST VL53L0X FlightSense ToF Ranging Sensor on a i2c bus.
+ *
+ * Copyright (C) 2016 STMicroelectronics Imaging Division.
+ * Copyright (C) 2018 Song Qiang <songqiang1304521@gmail.com>
+ *
+ * Datasheet available at
+ * <https://www.st.com/resource/en/datasheet/vl53l0x.pdf>
+ *
+ * Default 7-bit i2c slave address 0x29.
+ *
+ * TODO: FIFO buffer, continuous mode, interrupts, range selection,
+ * sensor ID check.
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+
+#include <linux/iio/iio.h>
+
+#define VL_REG_SYSRANGE_START				0x00
+
+#define VL_REG_SYSRANGE_MODE_MASK			GENMASK(3, 0)
+#define VL_REG_SYSRANGE_MODE_SINGLESHOT			0x00
+#define VL_REG_SYSRANGE_MODE_START_STOP			BIT(0)
+#define VL_REG_SYSRANGE_MODE_BACKTOBACK			BIT(1)
+#define VL_REG_SYSRANGE_MODE_TIMED			BIT(2)
+#define VL_REG_SYSRANGE_MODE_HISTOGRAM			BIT(3)
+
+#define VL_REG_RESULT_INT_STATUS			0x13
+#define VL_REG_RESULT_RANGE_STATUS			0x14
+#define VL_REG_RESULT_RANGE_STATUS_COMPLETE		BIT(0)
+
+struct vl53l0x_data {
+	struct i2c_client *client;
+};
+
+static int vl53l0x_read_proximity(struct vl53l0x_data *data,
+				  const struct iio_chan_spec *chan,
+				  int *val)
+{
+	struct i2c_client *client = data->client;
+	u16 tries = 20;
+	u8 buffer[12];
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(client, VL_REG_SYSRANGE_START, 1);
+	if (ret < 0)
+		return ret;
+
+	do {
+		ret = i2c_smbus_read_byte_data(client,
+					       VL_REG_RESULT_RANGE_STATUS);
+		if (ret < 0)
+			return ret;
+
+		if (ret & VL_REG_RESULT_RANGE_STATUS_COMPLETE)
+			break;
+
+		usleep_range(1000, 5000);
+	} while (--tries);
+	if (!tries)
+		return -ETIMEDOUT;
+
+	ret = i2c_smbus_read_i2c_block_data(client, VL_REG_RESULT_RANGE_STATUS,
+					    12, buffer);
+	if (ret < 0)
+		return ret;
+	else if (ret != 12)
+		return -EREMOTEIO;
+
+	/* Values should be between 30~1200 in millimeters. */
+	*val = (buffer[10] << 8) + buffer[11];
+
+	return 0;
+}
+
+static const struct iio_chan_spec vl53l0x_channels[] = {
+	{
+		.type = IIO_DISTANCE,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE),
+	},
+};
+
+static int vl53l0x_read_raw(struct iio_dev *indio_dev,
+			    const struct iio_chan_spec *chan,
+			    int *val, int *val2, long mask)
+{
+	struct vl53l0x_data *data = iio_priv(indio_dev);
+	int ret;
+
+	if (chan->type != IIO_DISTANCE)
+		return -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = vl53l0x_read_proximity(data, chan, val);
+		if (ret < 0)
+			return ret;
+
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		*val = 0;
+		*val2 = 1000;
+
+		return IIO_VAL_INT_PLUS_MICRO;
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info vl53l0x_info = {
+	.read_raw = vl53l0x_read_raw,
+};
+
+static int vl53l0x_probe(struct i2c_client *client)
+{
+	struct vl53l0x_data *data;
+	struct iio_dev *indio_dev;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	data->client = client;
+	i2c_set_clientdata(client, indio_dev);
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_READ_I2C_BLOCK |
+				     I2C_FUNC_SMBUS_BYTE_DATA))
+		return -EOPNOTSUPP;
+
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->name = "vl53l0x";
+	indio_dev->info = &vl53l0x_info;
+	indio_dev->channels = vl53l0x_channels;
+	indio_dev->num_channels = ARRAY_SIZE(vl53l0x_channels);
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	return devm_iio_device_register(&client->dev, indio_dev);
+}
+
+static const struct of_device_id st_vl53l0x_dt_match[] = {
+	{ .compatible = "st,vl53l0x", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, st_vl53l0x_dt_match);
+
+static struct i2c_driver vl53l0x_driver = {
+	.driver = {
+		.name = "vl53l0x-i2c",
+		.of_match_table = st_vl53l0x_dt_match,
+	},
+	.probe_new = vl53l0x_probe,
+};
+module_i2c_driver(vl53l0x_driver);
+
+MODULE_AUTHOR("Song Qiang <songqiang1304521@gmail.com>");
+MODULE_DESCRIPTION("ST vl53l0x ToF ranging sensor driver");
+MODULE_LICENSE("GPL v2");

drivers/spi/spi.c

@@ -2774,8 +2774,10 @@ int spi_setup(struct spi_device *spi)
 		return -EINVAL;
 	/* help drivers fail *cleanly* when they need options
 	 * that aren't supported with their current controller
+	 * SPI_CS_WORD has a fallback software implementation,
+	 * so it is ignored here.
 	 */
-	bad_bits = spi->mode & ~spi->controller->mode_bits;
+	bad_bits = spi->mode & ~(spi->controller->mode_bits | SPI_CS_WORD);
 	ugly_bits = bad_bits &
 		    (SPI_TX_DUAL | SPI_TX_QUAD | SPI_RX_DUAL | SPI_RX_QUAD);
 	if (ugly_bits) {
@@ -2829,6 +2831,33 @@ static int __spi_validate(struct spi_device *spi, struct spi_message *message)
 	if (list_empty(&message->transfers))
 		return -EINVAL;
 
+	/* If an SPI controller does not support toggling the CS line on each
+	 * transfer (indicated by the SPI_CS_WORD flag), we can emulate it by
+	 * splitting transfers into one-word transfers and ensuring that
+	 * cs_change is set for each transfer.
+	 */
+	if ((spi->mode & SPI_CS_WORD) && !(ctlr->mode_bits & SPI_CS_WORD)) {
+		size_t maxsize;
+		int ret;
+
+		maxsize = (spi->bits_per_word + 7) / 8;
+
+		/* spi_split_transfers_maxsize() requires message->spi */
+		message->spi = spi;
+
+		ret = spi_split_transfers_maxsize(ctlr, message, maxsize,
+						  GFP_KERNEL);
+		if (ret)
+			return ret;
+
+		list_for_each_entry(xfer, &message->transfers, transfer_list) {
+			/* don't change cs_change on the last entry in the list */
+			if (list_is_last(&xfer->transfer_list, &message->transfers))
+				break;
+			xfer->cs_change = 1;
+		}
+	}
+
 	/* Half-duplex links include original MicroWire, and ones with
 	 * only one data pin like SPI_3WIRE (switches direction) or where
 	 * either MOSI or MISO is missing.  They can also be caused by

drivers/staging/iio/adc/Kconfig

@@ -11,7 +11,7 @@ config AD7606
 	select IIO_TRIGGERED_BUFFER
 	help
 	  Say yes here to build support for Analog Devices:
-	  ad7606, ad7606-6, ad7606-4 analog to digital converters (ADC).
+	  ad7605-4, ad7606, ad7606-6, ad7606-4 analog to digital converters (ADC).
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called ad7606.

drivers/staging/iio/adc/ad7606.c

@@ -26,9 +26,12 @@
 
 #include "ad7606.h"
 
-/* Scales are computed as 2.5/2**16 and 5/2**16 respectively */
+/*
+ * Scales are computed as 5000/32768 and 10000/32768 respectively,
+ * so that when applied to the raw values they provide mV values
+ */
 static const unsigned int scale_avail[2][2] = {
-	{0, 38147}, {0, 76294}
+	{0, 152588}, {0, 305176}
 };
 
 static int ad7606_reset(struct ad7606_state *st)
@@ -273,7 +276,7 @@ static const struct attribute_group ad7606_attribute_group_range = {
 	.attrs = ad7606_attributes_range,
 };
 
-#define AD7606_CHANNEL(num)					\
+#define AD760X_CHANNEL(num, mask)				\
 	{							\
 		.type = IIO_VOLTAGE,				\
 		.indexed = 1,					\
@@ -281,8 +284,7 @@ static const struct attribute_group ad7606_attribute_group_range = {
 		.address = num,					\
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),	\
 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),\
-		.info_mask_shared_by_all =			\
-			BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),	\
+		.info_mask_shared_by_all = mask,		\
 		.scan_index = num,				\
 		.scan_type = {					\
 			.sign = 's',				\
@@ -292,6 +294,20 @@ static const struct attribute_group ad7606_attribute_group_range = {
 		},						\
 	}
 
+#define AD7605_CHANNEL(num)	\
+	AD760X_CHANNEL(num, 0)
+
+#define AD7606_CHANNEL(num)	\
+	AD760X_CHANNEL(num, BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO))
+
+static const struct iio_chan_spec ad7605_channels[] = {
+	IIO_CHAN_SOFT_TIMESTAMP(4),
+	AD7605_CHANNEL(0),
+	AD7605_CHANNEL(1),
+	AD7605_CHANNEL(2),
+	AD7605_CHANNEL(3),
+};
+
 static const struct iio_chan_spec ad7606_channels[] = {
 	IIO_CHAN_SOFT_TIMESTAMP(8),
 	AD7606_CHANNEL(0),
@@ -308,17 +324,24 @@ static const struct ad7606_chip_info ad7606_chip_info_tbl[] = {
 	/*
 	 * More devices added in future
 	 */
+	[ID_AD7605_4] = {
+		.channels = ad7605_channels,
+		.num_channels = 5,
+	},
 	[ID_AD7606_8] = {
 		.channels = ad7606_channels,
 		.num_channels = 9,
+		.has_oversampling = true,
 	},
 	[ID_AD7606_6] = {
 		.channels = ad7606_channels,
 		.num_channels = 7,
+		.has_oversampling = true,
 	},
 	[ID_AD7606_4] = {
 		.channels = ad7606_channels,
 		.num_channels = 5,
+		.has_oversampling = true,
 	},
 };
 
@@ -349,6 +372,9 @@ static int ad7606_request_gpios(struct ad7606_state *st)
 	if (IS_ERR(st->gpio_frstdata))
 		return PTR_ERR(st->gpio_frstdata);
 
+	if (!st->chip_info->has_oversampling)
+		return 0;
+
 	st->gpio_os = devm_gpiod_get_array_optional(dev, "oversampling-ratio",
 			GPIOD_OUT_LOW);
 	return PTR_ERR_OR_ZERO(st->gpio_os);
@@ -427,12 +453,12 @@ int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
 		return ret;
 	}
 
+	st->chip_info = &ad7606_chip_info_tbl[id];
+
 	ret = ad7606_request_gpios(st);
 	if (ret)
 		goto error_disable_reg;
 
-	st->chip_info = &ad7606_chip_info_tbl[id];
-
 	indio_dev->dev.parent = dev;
 	if (st->gpio_os) {
 		if (st->gpio_range)

drivers/staging/iio/adc/ad7606.h

@@ -11,20 +11,40 @@
 
 /**
  * struct ad7606_chip_info - chip specific information
- * @name:		identification string for chip
  * @channels:		channel specification
  * @num_channels:	number of channels
- * @lock		protect sensor state
+ * @has_oversampling:   whether the device has oversampling support
  */
 
 struct ad7606_chip_info {
 	const struct iio_chan_spec	*channels;
 	unsigned int			num_channels;
+	bool				has_oversampling;
 };
 
 /**
  * struct ad7606_state - driver instance specific data
- * @lock		protect sensor state
+ * @dev		pointer to kernel device
+ * @chip_info		entry in the table of chips that describes this device
+ * @reg		regulator info for the the power supply of the device
+ * @poll_work		work struct for continuously reading data from the device
+ *			into an IIO triggered buffer
+ * @wq_data_avail	wait queue struct for buffer mode
+ * @bops		bus operations (SPI or parallel)
+ * @range		voltage range selection, selects which scale to apply
+ * @oversampling	oversampling selection
+ * @done		marks whether reading data is done
+ * @base_address	address from where to read data in parallel operation
+ * @lock		protect sensor state from concurrent accesses to GPIOs
+ * @gpio_convst	GPIO descriptor for conversion start signal (CONVST)
+ * @gpio_reset		GPIO descriptor for device hard-reset
+ * @gpio_range		GPIO descriptor for range selection
+ * @gpio_standby	GPIO descriptor for stand-by signal (STBY),
+ *			controls power-down mode of device
+ * @gpio_frstdata	GPIO descriptor for reading from device when data
+ *			is being read on the first channel
+ * @gpio_os		GPIO descriptors to control oversampling on the device
+ * @data		buffer for reading data from the device
  */
 
 struct ad7606_state {
@@ -55,6 +75,10 @@ struct ad7606_state {
 	unsigned short			data[12] ____cacheline_aligned;
 };
 
+/**
+ * struct ad7606_bus_ops - driver bus operations
+ * @read_block		function pointer for reading blocks of data
+ */
 struct ad7606_bus_ops {
 	/* more methods added in future? */
 	int (*read_block)(struct device *dev, int num, void *data);
@@ -66,6 +90,7 @@ int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
 int ad7606_remove(struct device *dev, int irq);
 
 enum ad7606_supported_device_ids {
+	ID_AD7605_4,
 	ID_AD7606_8,
 	ID_AD7606_6,
 	ID_AD7606_4

drivers/staging/iio/adc/ad7606_par.c

@@ -79,6 +79,9 @@ static int ad7606_par_remove(struct platform_device *pdev)
 
 static const struct platform_device_id ad7606_driver_ids[] = {
 	{
+		.name		= "ad7605-4",
+		.driver_data	= ID_AD7605_4,
+	}, {
 		.name		= "ad7606-8",
 		.driver_data	= ID_AD7606_8,
 	}, {

drivers/staging/iio/adc/ad7606_spi.c

@@ -55,6 +55,7 @@ static int ad7606_spi_remove(struct spi_device *spi)
 }
 
 static const struct spi_device_id ad7606_id[] = {
+	{"ad7605-4", ID_AD7605_4},
 	{"ad7606-8", ID_AD7606_8},
 	{"ad7606-6", ID_AD7606_6},
 	{"ad7606-4", ID_AD7606_4},

include/linux/spi/spi.h

@@ -163,6 +163,7 @@ struct spi_device {
 #define	SPI_TX_QUAD	0x200			/* transmit with 4 wires */
 #define	SPI_RX_DUAL	0x400			/* receive with 2 wires */
 #define	SPI_RX_QUAD	0x800			/* receive with 4 wires */
+#define SPI_CS_WORD	0x1000			/* toggle cs after each word */
 	int			irq;
 	void			*controller_state;
 	void			*controller_data;
@@ -177,7 +178,6 @@ struct spi_device {
 	 * the controller talks to each chip, like:
 	 *  - memory packing (12 bit samples into low bits, others zeroed)
 	 *  - priority
-	 *  - drop chipselect after each word
 	 *  - chipselect delays
 	 *  - ...
 	 */