Merge tag 'pxa-for-4.6' of https://github.com/rjarzmik/linux into next/soc

Merge "pxa changes for v4.6 cycle" from Robert Jarzmik:

This is a minor cycle with :
 - cleanup fixes from Arnd, mainly build oriented and sparse type ones
 - dma fixes for requestors above 32 (impacting mainly camera driver)
 - some minor cleanup on pxa3xx device-tree side

* tag 'pxa-for-4.6' of https://github.com/rjarzmik/linux:
  dmaengine: pxa_dma: fix the maximum requestor line
  ARM: pxa: add the number of DMA requestor lines
  dmaengine: mmp-pdma: add number of requestors
  dma: mmp_pdma: Add the #dma-requests DT property documentation
  ARM: pxa: pxa3xx device-tree support cleanup
  ARM: pxa: don't select RFKILL if CONFIG_NET is disabled
  ARM: pxa: fix building without IWMMXT
  ARM: pxa: move extern declarations to pm.h
  ARM: pxa: always select one of the two CPU types
  ARM: pxa: don't select GPIO_SYSFS for MIOA701
  ARM: pxa: mark unused eseries code as __maybe_unused
  ARM: pxa: mark spitz_card_pwr_ctrl as __maybe_unused
  ARM: pxa: define clock registers as __iomem

Documentation/devicetree/bindings/dma/mmp-dma.txt

@@ -12,6 +12,8 @@ Required properties:
 Optional properties:
 - #dma-channels: Number of DMA channels supported by the controller (defaults
   to 32 when not specified)
+- #dma-requests: Number of DMA requestor lines supported by the controller
+  (defaults to 32 when not specified)
 
 "marvell,pdma-1.0"
 Used platforms: pxa25x, pxa27x, pxa3xx, pxa93x, pxa168, pxa910, pxa688.

arch/arm/Kconfig

@@ -547,6 +547,7 @@ config ARCH_PXA
 	select CLKSRC_PXA
 	select CLKSRC_MMIO
 	select CLKSRC_OF
+	select CPU_XSCALE if !CPU_XSC3
 	select GENERIC_CLOCKEVENTS
 	select GPIO_PXA
 	select HAVE_IDE

arch/arm/boot/dts/pxa27x.dtsi

@@ -13,6 +13,7 @@
 			interrupts = <25>;
 			#dma-channels = <32>;
 			#dma-cells = <2>;
+			#dma-requests = <75>;
 			status = "okay";
 		};
 

arch/arm/boot/dts/pxa3xx.dtsi

@@ -12,6 +12,7 @@
 			interrupts = <25>;
 			#dma-channels = <32>;
 			#dma-cells = <2>;
+			#dma-requests = <100>;
 			status = "okay";
 		};
 

arch/arm/configs/pxa_defconfig

@@ -378,6 +378,7 @@ CONFIG_GPIO_PALMAS=y
 CONFIG_GPIO_TPS6586X=y
 CONFIG_GPIO_TPS65910=y
 CONFIG_GPIO_MAX7301=m
+CONFIG_GPIO_SYSFS=y
 CONFIG_POWER_SUPPLY_DEBUG=y
 CONFIG_PDA_POWER=m
 CONFIG_BATTERY_SBS=m

arch/arm/mach-pxa/Kconfig

@@ -297,7 +297,6 @@ config MACH_MAGICIAN
 
 config MACH_MIOA701
 	bool "Mitac Mio A701 Support"
-	select GPIO_SYSFS
 	select IWMMXT
 	select PXA27x
 	help
@@ -529,7 +528,7 @@ config MACH_TOSA
 
 config TOSA_BT
 	tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
-	depends on MACH_TOSA
+	depends on MACH_TOSA && NET
 	select RFKILL
 	help
 	  This is a simple driver that is able to control

arch/arm/mach-pxa/devices.c

@@ -1203,6 +1203,7 @@ void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info)
 
 static struct mmp_dma_platdata pxa_dma_pdata = {
 	.dma_channels	= 0,
+	.nb_requestors	= 0,
 };
 
 static struct resource pxa_dma_resource[] = {
@@ -1231,7 +1232,7 @@ static struct platform_device pxa2xx_pxa_dma = {
 	.resource	= pxa_dma_resource,
 };
 
-void __init pxa2xx_set_dmac_info(int nb_channels)
+void __init pxa2xx_set_dmac_info(int nb_channels, int nb_requestors)
 {
 	pxa_dma_pdata.dma_channels = nb_channels;
 	pxa_register_device(&pxa2xx_pxa_dma, &pxa_dma_pdata);

arch/arm/mach-pxa/eseries.c

@@ -57,7 +57,7 @@ struct gpio_vbus_mach_info e7xx_udc_info = {
 	.gpio_pullup_inverted = 1
 };
 
-static struct platform_device e7xx_gpio_vbus = {
+static struct platform_device e7xx_gpio_vbus __maybe_unused = {
 	.name	= "gpio-vbus",
 	.id	= -1,
 	.dev	= {
@@ -126,7 +126,7 @@ struct resource eseries_tmio_resources[] = {
 };
 
 /* Some e-series hardware cannot control the 32K clock */
-static void __init eseries_register_clks(void)
+static void __init __maybe_unused eseries_register_clks(void)
 {
 	clk_register_fixed_rate(NULL, "CLK_CK32K", NULL, CLK_IS_ROOT, 32768);
 }

arch/arm/mach-pxa/gumstix.c

@@ -139,14 +139,14 @@ static void gumstix_setup_bt_clock(void)
 {
 	int timeout = 500;
 
-	if (!(OSCC & OSCC_OOK))
+	if (!(readl(OSCC) & OSCC_OOK))
 		pr_warn("32kHz clock was not on. Bootloader may need to be updated\n");
 	else
 		return;
 
-	OSCC |= OSCC_OON;
+	writel(readl(OSCC) | OSCC_OON, OSCC);
 	do {
-		if (OSCC & OSCC_OOK)
+		if (readl(OSCC) & OSCC_OOK)
 			break;
 		udelay(1);
 	} while (--timeout);

arch/arm/mach-pxa/include/mach/pxa2xx-regs.h

@@ -134,10 +134,10 @@
 /*
  * PXA2xx specific Core clock definitions
  */
-#define CCCR		__REG(0x41300000)  /* Core Clock Configuration Register */
-#define CCSR		__REG(0x4130000C)  /* Core Clock Status Register */
-#define CKEN		__REG(0x41300004)  /* Clock Enable Register */
-#define OSCC		__REG(0x41300008)  /* Oscillator Configuration Register */
+#define CCCR		io_p2v(0x41300000)  /* Core Clock Configuration Register */
+#define CCSR		io_p2v(0x4130000C)  /* Core Clock Status Register */
+#define CKEN		io_p2v(0x41300004)  /* Clock Enable Register */
+#define OSCC		io_p2v(0x41300008)  /* Oscillator Configuration Register */
 
 #define CCCR_N_MASK	0x0380	/* Run Mode Frequency to Turbo Mode Frequency Multiplier */
 #define CCCR_M_MASK	0x0060	/* Memory Frequency to Run Mode Frequency Multiplier */

arch/arm/mach-pxa/include/mach/pxa3xx-regs.h

@@ -18,7 +18,7 @@
 /*
  * Oscillator Configuration Register (OSCC)
  */
-#define OSCC           __REG(0x41350000)  /* Oscillator Configuration Register */
+#define OSCC           io_p2v(0x41350000)  /* Oscillator Configuration Register */
 
 #define OSCC_PEN       (1 << 11)       /* 13MHz POUT */
 

arch/arm/mach-pxa/pm.h

@@ -29,6 +29,9 @@ extern int pxa_pm_enter(suspend_state_t state);
 extern int pxa_pm_prepare(void);
 extern void pxa_pm_finish(void);
 
+extern const char pm_enter_standby_start[], pm_enter_standby_end[];
+extern int pxa3xx_finish_suspend(unsigned long);
+
 /* NOTE: this is for PM debugging on Lubbock,  it's really a big
  * ugly, but let's keep the crap minimum here, instead of direct
  * accessing the LUBBOCK CPLD registers in arch/arm/mach-pxa/pm.c

arch/arm/mach-pxa/pxa-dt.c

@@ -19,42 +19,18 @@
 #include "generic.h"
 
 #ifdef CONFIG_PXA3xx
-static const struct of_dev_auxdata const pxa3xx_auxdata_lookup[] __initconst = {
-	OF_DEV_AUXDATA("mrvl,pxa-uart",		0x40100000, "pxa2xx-uart.0", NULL),
-	OF_DEV_AUXDATA("mrvl,pxa-uart",		0x40200000, "pxa2xx-uart.1", NULL),
-	OF_DEV_AUXDATA("mrvl,pxa-uart",		0x40700000, "pxa2xx-uart.2", NULL),
-	OF_DEV_AUXDATA("mrvl,pxa-uart",		0x41600000, "pxa2xx-uart.3", NULL),
-	OF_DEV_AUXDATA("marvell,pxa-mmc",	0x41100000, "pxa2xx-mci.0", NULL),
-	OF_DEV_AUXDATA("intel,pxa3xx-gpio",	0x40e00000, "pxa3xx-gpio", NULL),
-	OF_DEV_AUXDATA("marvell,pxa-ohci",	0x4c000000, "pxa27x-ohci", NULL),
-	OF_DEV_AUXDATA("mrvl,pxa-i2c",		0x40301680, "pxa2xx-i2c.0", NULL),
-	OF_DEV_AUXDATA("mrvl,pwri2c",		0x40f500c0, "pxa3xx-i2c.1", NULL),
-	OF_DEV_AUXDATA("marvell,pxa3xx-nand",	0x43100000, "pxa3xx-nand", NULL),
-	{}
-};
-
-static void __init pxa3xx_dt_init(void)
-{
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     pxa3xx_auxdata_lookup, NULL);
-}
-
 static const char *const pxa3xx_dt_board_compat[] __initconst = {
 	"marvell,pxa300",
 	"marvell,pxa310",
 	"marvell,pxa320",
 	NULL,
 };
-#endif
 
-#ifdef CONFIG_PXA3xx
 DT_MACHINE_START(PXA_DT, "Marvell PXA3xx (Device Tree Support)")
 	.map_io		= pxa3xx_map_io,
 	.init_irq	= pxa3xx_dt_init_irq,
 	.handle_irq	= pxa3xx_handle_irq,
-	.init_time	= pxa_timer_init,
 	.restart	= pxa_restart,
-	.init_machine	= pxa3xx_dt_init,
 	.dt_compat	= pxa3xx_dt_board_compat,
 MACHINE_END
 #endif

arch/arm/mach-pxa/pxa25x.c

@@ -206,7 +206,7 @@ static int __init pxa25x_init(void)
 		register_syscore_ops(&pxa_irq_syscore_ops);
 		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
 
-		pxa2xx_set_dmac_info(16);
+		pxa2xx_set_dmac_info(16, 40);
 		pxa_register_device(&pxa25x_device_gpio, &pxa25x_gpio_info);
 		ret = platform_add_devices(pxa25x_devices,
 					   ARRAY_SIZE(pxa25x_devices));

arch/arm/mach-pxa/pxa27x.c

@@ -132,7 +132,8 @@ void pxa27x_cpu_pm_enter(suspend_state_t state)
 #ifndef CONFIG_IWMMXT
 	u64 acc0;
 
-	asm volatile("mra %Q0, %R0, acc0" : "=r" (acc0));
+	asm volatile(".arch_extension xscale\n\t"
+		     "mra %Q0, %R0, acc0" : "=r" (acc0));
 #endif
 
 	/* ensure voltage-change sequencer not initiated, which hangs */
@@ -151,7 +152,8 @@ void pxa27x_cpu_pm_enter(suspend_state_t state)
 	case PM_SUSPEND_MEM:
 		cpu_suspend(pwrmode, pxa27x_finish_suspend);
 #ifndef CONFIG_IWMMXT
-		asm volatile("mar acc0, %Q0, %R0" : "=r" (acc0));
+		asm volatile(".arch_extension xscale\n\t"
+			     "mar acc0, %Q0, %R0" : "=r" (acc0));
 #endif
 		break;
 	}
@@ -309,7 +311,7 @@ static int __init pxa27x_init(void)
 		if (!of_have_populated_dt()) {
 			pxa_register_device(&pxa27x_device_gpio,
 					    &pxa27x_gpio_info);
-			pxa2xx_set_dmac_info(32);
+			pxa2xx_set_dmac_info(32, 75);
 			ret = platform_add_devices(devices,
 						   ARRAY_SIZE(devices));
 		}

arch/arm/mach-pxa/pxa3xx.c

@@ -68,7 +68,6 @@ static unsigned long wakeup_src;
  */
 static void pxa3xx_cpu_standby(unsigned int pwrmode)
 {
-	extern const char pm_enter_standby_start[], pm_enter_standby_end[];
 	void (*fn)(unsigned int) = (void __force *)(sram + 0x8000);
 
 	memcpy_toio(sram + 0x8000, pm_enter_standby_start,
@@ -103,11 +102,10 @@ static void pxa3xx_cpu_pm_suspend(void)
 #ifndef CONFIG_IWMMXT
 	u64 acc0;
 
-	asm volatile("mra %Q0, %R0, acc0" : "=r" (acc0));
+	asm volatile(".arch_extension xscale\n\t"
+		     "mra %Q0, %R0, acc0" : "=r" (acc0));
 #endif
 
-	extern int pxa3xx_finish_suspend(unsigned long);
-
 	/* resuming from D2 requires the HSIO2/BOOT/TPM clocks enabled */
 	CKENA |= (1 << CKEN_BOOT) | (1 << CKEN_TPM);
 	CKENB |= 1 << (CKEN_HSIO2 & 0x1f);
@@ -133,7 +131,8 @@ static void pxa3xx_cpu_pm_suspend(void)
 	AD3ER = 0;
 
 #ifndef CONFIG_IWMMXT
-	asm volatile("mar acc0, %Q0, %R0" : "=r" (acc0));
+	asm volatile(".arch_extension xscale\n\t"
+		     "mar acc0, %Q0, %R0" : "=r" (acc0));
 #endif
 }
 
@@ -450,7 +449,7 @@ static int __init pxa3xx_init(void)
 		if (of_have_populated_dt())
 			return 0;
 
-		pxa2xx_set_dmac_info(32);
+		pxa2xx_set_dmac_info(32, 100);
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
 		if (ret)
 			return ret;

arch/arm/mach-pxa/spitz.c

@@ -201,7 +201,7 @@ static void __init spitz_scoop_init(void)
 }
 
 /* Power control is shared with between one of the CF slots and SD */
-static void spitz_card_pwr_ctrl(uint8_t enable, uint8_t new_cpr)
+static void __maybe_unused spitz_card_pwr_ctrl(uint8_t enable, uint8_t new_cpr)
 {
 	unsigned short cpr;
 	unsigned long flags;

arch/arm/mach-pxa/zeus.c

@@ -910,7 +910,7 @@ static void __init zeus_map_io(void)
 	PMCR = PSPR = 0;
 
 	/* enable internal 32.768Khz oscillator (ignore OSCC_OOK) */
-	OSCC |= OSCC_OON;
+	writel(readl(OSCC) | OSCC_OON, OSCC);
 
 	/* Some clock cycles later (from OSCC_ON), programme PCFR (OPDE...).
 	 * float chip selects and PCMCIA */

arch/arm/plat-pxa/include/plat/dma.h

@@ -95,6 +95,6 @@ static inline int pxad_toggle_reserved_channel(int legacy_channel)
 }
 #endif
 
-extern void __init pxa2xx_set_dmac_info(int nb_channels);
+extern void __init pxa2xx_set_dmac_info(int nb_channels, int nb_requestors);
 
 #endif /* __PLAT_DMA_H */

drivers/clk/pxa/clk-pxa25x.c

@@ -84,7 +84,7 @@ unsigned int pxa25x_get_clk_frequency_khz(int info)
 static unsigned long clk_pxa25x_memory_get_rate(struct clk_hw *hw,
 						unsigned long parent_rate)
 {
-	unsigned long cccr = CCCR;
+	unsigned long cccr = readl(CCCR);
 	unsigned int m = M_clk_mult[(cccr >> 5) & 0x03];
 
 	return parent_rate / m;
@@ -99,7 +99,7 @@ PARENTS(pxa25x_osc3) = { "osc_3_6864mhz", "osc_3_6864mhz" };
 #define PXA25X_CKEN(dev_id, con_id, parents, mult, div,			\
 		    bit, is_lp, flags)					\
 	PXA_CKEN(dev_id, con_id, bit, parents, mult, div, mult, div,	\
-		 is_lp,  &CKEN, CKEN_ ## bit, flags)
+		 is_lp,  CKEN, CKEN_ ## bit, flags)
 #define PXA25X_PBUS95_CKEN(dev_id, con_id, bit, mult_hp, div_hp, delay)	\
 	PXA25X_CKEN(dev_id, con_id, pxa25x_pbus95_parents, mult_hp,	\
 		    div_hp, bit, NULL, 0)
@@ -112,10 +112,10 @@ PARENTS(pxa25x_osc3) = { "osc_3_6864mhz", "osc_3_6864mhz" };
 
 #define PXA25X_CKEN_1RATE(dev_id, con_id, bit, parents, delay)		\
 	PXA_CKEN_1RATE(dev_id, con_id, bit, parents,			\
-		       &CKEN, CKEN_ ## bit, 0)
+		       CKEN, CKEN_ ## bit, 0)
 #define PXA25X_CKEN_1RATE_AO(dev_id, con_id, bit, parents, delay)	\
 	PXA_CKEN_1RATE(dev_id, con_id, bit, parents,			\
-		       &CKEN, CKEN_ ## bit, CLK_IGNORE_UNUSED)
+		       CKEN, CKEN_ ## bit, CLK_IGNORE_UNUSED)
 
 static struct desc_clk_cken pxa25x_clocks[] __initdata = {
 	PXA25X_PBUS95_CKEN("pxa2xx-mci.0", NULL, MMC, 1, 5, 0),
@@ -162,7 +162,7 @@ MUX_RO_RATE_RO_OPS(clk_pxa25x_core, "core");
 static unsigned long clk_pxa25x_run_get_rate(struct clk_hw *hw,
 					     unsigned long parent_rate)
 {
-	unsigned long cccr = CCCR;
+	unsigned long cccr = readl(CCCR);
 	unsigned int n2 = N2_clk_mult[(cccr >> 7) & 0x07];
 
 	return (parent_rate / n2) * 2;
@@ -173,7 +173,7 @@ RATE_RO_OPS(clk_pxa25x_run, "run");
 static unsigned long clk_pxa25x_cpll_get_rate(struct clk_hw *hw,
 	unsigned long parent_rate)
 {
-	unsigned long clkcfg, cccr = CCCR;
+	unsigned long clkcfg, cccr = readl(CCCR);
 	unsigned int l, m, n2, t;
 
 	asm("mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg));

drivers/clk/pxa/clk-pxa27x.c

@@ -85,7 +85,7 @@ unsigned int pxa27x_get_clk_frequency_khz(int info)
 
 bool pxa27x_is_ppll_disabled(void)
 {
-	unsigned long ccsr = CCSR;
+	unsigned long ccsr = readl(CCSR);
 
 	return ccsr & (1 << CCCR_PPDIS_BIT);
 }
@@ -93,7 +93,7 @@ bool pxa27x_is_ppll_disabled(void)
 #define PXA27X_CKEN(dev_id, con_id, parents, mult_hp, div_hp,		\
 		    bit, is_lp, flags)					\
 	PXA_CKEN(dev_id, con_id, bit, parents, 1, 1, mult_hp, div_hp,	\
-		 is_lp,  &CKEN, CKEN_ ## bit, flags)
+		 is_lp,  CKEN, CKEN_ ## bit, flags)
 #define PXA27X_PBUS_CKEN(dev_id, con_id, bit, mult_hp, div_hp, delay)	\
 	PXA27X_CKEN(dev_id, con_id, pxa27x_pbus_parents, mult_hp,	\
 		    div_hp, bit, pxa27x_is_ppll_disabled, 0)
@@ -106,10 +106,10 @@ PARENTS(pxa27x_membus) = { "lcd_base", "lcd_base" };
 
 #define PXA27X_CKEN_1RATE(dev_id, con_id, bit, parents, delay)		\
 	PXA_CKEN_1RATE(dev_id, con_id, bit, parents,			\
-		       &CKEN, CKEN_ ## bit, 0)
+		       CKEN, CKEN_ ## bit, 0)
 #define PXA27X_CKEN_1RATE_AO(dev_id, con_id, bit, parents, delay)	\
 	PXA_CKEN_1RATE(dev_id, con_id, bit, parents,			\
-		       &CKEN, CKEN_ ## bit, CLK_IGNORE_UNUSED)
+		       CKEN, CKEN_ ## bit, CLK_IGNORE_UNUSED)
 
 static struct desc_clk_cken pxa27x_clocks[] __initdata = {
 	PXA27X_PBUS_CKEN("pxa2xx-uart.0", NULL, FFUART, 2, 42, 1),
@@ -151,7 +151,7 @@ static unsigned long clk_pxa27x_cpll_get_rate(struct clk_hw *hw,
 	unsigned long clkcfg;
 	unsigned int t, ht;
 	unsigned int l, L, n2, N;
-	unsigned long ccsr = CCSR;
+	unsigned long ccsr = readl(CCSR);
 
 	asm("mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg));
 	t  = clkcfg & (1 << 0);
@@ -171,8 +171,8 @@ static unsigned long clk_pxa27x_lcd_base_get_rate(struct clk_hw *hw,
 						  unsigned long parent_rate)
 {
 	unsigned int l, osc_forced;
-	unsigned long ccsr = CCSR;
-	unsigned long cccr = CCCR;
+	unsigned long ccsr = readl(CCSR);
+	unsigned long cccr = readl(CCCR);
 
 	l  = ccsr & CCSR_L_MASK;
 	osc_forced = ccsr & (1 << CCCR_CPDIS_BIT);
@@ -193,7 +193,7 @@ static unsigned long clk_pxa27x_lcd_base_get_rate(struct clk_hw *hw,
 static u8 clk_pxa27x_lcd_base_get_parent(struct clk_hw *hw)
 {
 	unsigned int osc_forced;
-	unsigned long ccsr = CCSR;
+	unsigned long ccsr = readl(CCSR);
 
 	osc_forced = ccsr & (1 << CCCR_CPDIS_BIT);
 	if (osc_forced)
@@ -222,7 +222,7 @@ static unsigned long clk_pxa27x_core_get_rate(struct clk_hw *hw,
 {
 	unsigned long clkcfg;
 	unsigned int t, ht, b, osc_forced;
-	unsigned long ccsr = CCSR;
+	unsigned long ccsr = readl(CCSR);
 
 	osc_forced = ccsr & (1 << CCCR_CPDIS_BIT);
 	asm("mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg));
@@ -242,7 +242,7 @@ static u8 clk_pxa27x_core_get_parent(struct clk_hw *hw)
 {
 	unsigned long clkcfg;
 	unsigned int t, ht, b, osc_forced;
-	unsigned long ccsr = CCSR;
+	unsigned long ccsr = readl(CCSR);
 
 	osc_forced = ccsr & (1 << CCCR_CPDIS_BIT);
 	if (osc_forced)
@@ -263,7 +263,7 @@ MUX_RO_RATE_RO_OPS(clk_pxa27x_core, "core");
 static unsigned long clk_pxa27x_run_get_rate(struct clk_hw *hw,
 					     unsigned long parent_rate)
 {
-	unsigned long ccsr = CCSR;
+	unsigned long ccsr = readl(CCSR);
 	unsigned int n2 = (ccsr & CCSR_N2_MASK) >> CCSR_N2_SHIFT;
 
 	return (parent_rate / n2) * 2;
@@ -285,7 +285,7 @@ static unsigned long clk_pxa27x_system_bus_get_rate(struct clk_hw *hw,
 {
 	unsigned long clkcfg;
 	unsigned int b, osc_forced;
-	unsigned long ccsr = CCSR;
+	unsigned long ccsr = readl(CCSR);
 
 	osc_forced = ccsr & (1 << CCCR_CPDIS_BIT);
 	asm("mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg));
@@ -302,7 +302,7 @@ static unsigned long clk_pxa27x_system_bus_get_rate(struct clk_hw *hw,
 static u8 clk_pxa27x_system_bus_get_parent(struct clk_hw *hw)
 {
 	unsigned int osc_forced;
-	unsigned long ccsr = CCSR;
+	unsigned long ccsr = readl(CCSR);
 
 	osc_forced = ccsr & (1 << CCCR_CPDIS_BIT);
 	if (osc_forced)
@@ -318,8 +318,8 @@ static unsigned long clk_pxa27x_memory_get_rate(struct clk_hw *hw,
 						unsigned long parent_rate)
 {
 	unsigned int a, l, osc_forced;
-	unsigned long cccr = CCCR;
-	unsigned long ccsr = CCSR;
+	unsigned long cccr = readl(CCCR);
+	unsigned long ccsr = readl(CCSR);
 
 	osc_forced = ccsr & (1 << CCCR_CPDIS_BIT);
 	a = cccr & (1 << CCCR_A_BIT);
@@ -337,8 +337,8 @@ static unsigned long clk_pxa27x_memory_get_rate(struct clk_hw *hw,
 static u8 clk_pxa27x_memory_get_parent(struct clk_hw *hw)
 {
 	unsigned int osc_forced, a;
-	unsigned long cccr = CCCR;
-	unsigned long ccsr = CCSR;
+	unsigned long cccr = readl(CCCR);
+	unsigned long ccsr = readl(CCSR);
 
 	osc_forced = ccsr & (1 << CCCR_CPDIS_BIT);
 	a = cccr & (1 << CCCR_A_BIT);

drivers/clk/pxa/clk-pxa3xx.c

@@ -334,8 +334,7 @@ static void __init pxa3xx_base_clocks_init(void)
 	clk_register_clk_pxa3xx_system_bus();
 	clk_register_clk_pxa3xx_ac97();
 	clk_register_clk_pxa3xx_smemc();
-	clk_register_gate(NULL, "CLK_POUT", "osc_13mhz", 0,
-			  (void __iomem *)&OSCC, 11, 0, NULL);
+	clk_register_gate(NULL, "CLK_POUT", "osc_13mhz", 0, OSCC, 11, 0, NULL);
 	clkdev_pxa_register(CLK_OSTIMER, "OSTIMER0", NULL,
 			    clk_register_fixed_factor(NULL, "os-timer0",
 						      "osc_13mhz", 0, 1, 4));

drivers/cpufreq/pxa2xx-cpufreq.c

@@ -319,7 +319,7 @@ static int pxa_set_target(struct cpufreq_policy *policy, unsigned int idx)
 	local_irq_save(flags);
 
 	/* Set new the CCCR and prepare CCLKCFG */
-	CCCR = pxa_freq_settings[idx].cccr;
+	writel(pxa_freq_settings[idx].cccr, CCCR);
 	cclkcfg = pxa_freq_settings[idx].cclkcfg;
 
 	asm volatile("							\n\

drivers/dma/pxa_dma.c

@@ -122,6 +122,7 @@ struct pxad_chan {
 struct pxad_device {
 	struct dma_device		slave;
 	int				nr_chans;
+	int				nr_requestors;
 	void __iomem			*base;
 	struct pxad_phy			*phys;
 	spinlock_t			phy_lock;	/* Phy association */
@@ -473,7 +474,7 @@ static void pxad_free_phy(struct pxad_chan *chan)
 		return;
 
 	/* clear the channel mapping in DRCMR */
-	if (chan->drcmr <= DRCMR_CHLNUM) {
+	if (chan->drcmr <= pdev->nr_requestors) {
 		reg = pxad_drcmr(chan->drcmr);
 		writel_relaxed(0, chan->phy->base + reg);
 	}
@@ -509,6 +510,7 @@ static bool is_running_chan_misaligned(struct pxad_chan *chan)
 
 static void phy_enable(struct pxad_phy *phy, bool misaligned)
 {
+	struct pxad_device *pdev;
 	u32 reg, dalgn;
 
 	if (!phy->vchan)
@@ -518,7 +520,8 @@ static void phy_enable(struct pxad_phy *phy, bool misaligned)
 		"%s(); phy=%p(%d) misaligned=%d\n", __func__,
 		phy, phy->idx, misaligned);
 
-	if (phy->vchan->drcmr <= DRCMR_CHLNUM) {
+	pdev = to_pxad_dev(phy->vchan->vc.chan.device);
+	if (phy->vchan->drcmr <= pdev->nr_requestors) {
 		reg = pxad_drcmr(phy->vchan->drcmr);
 		writel_relaxed(DRCMR_MAPVLD | phy->idx, phy->base + reg);
 	}
@@ -908,6 +911,7 @@ static void pxad_get_config(struct pxad_chan *chan,
 {
 	u32 maxburst = 0, dev_addr = 0;
 	enum dma_slave_buswidth width = DMA_SLAVE_BUSWIDTH_UNDEFINED;
+	struct pxad_device *pdev = to_pxad_dev(chan->vc.chan.device);
 
 	*dcmd = 0;
 	if (dir == DMA_DEV_TO_MEM) {
@@ -916,7 +920,7 @@ static void pxad_get_config(struct pxad_chan *chan,
 		dev_addr = chan->cfg.src_addr;
 		*dev_src = dev_addr;
 		*dcmd |= PXA_DCMD_INCTRGADDR;
-		if (chan->drcmr <= DRCMR_CHLNUM)
+		if (chan->drcmr <= pdev->nr_requestors)
 			*dcmd |= PXA_DCMD_FLOWSRC;
 	}
 	if (dir == DMA_MEM_TO_DEV) {
@@ -925,7 +929,7 @@ static void pxad_get_config(struct pxad_chan *chan,
 		dev_addr = chan->cfg.dst_addr;
 		*dev_dst = dev_addr;
 		*dcmd |= PXA_DCMD_INCSRCADDR;
-		if (chan->drcmr <= DRCMR_CHLNUM)
+		if (chan->drcmr <= pdev->nr_requestors)
 			*dcmd |= PXA_DCMD_FLOWTRG;
 	}
 	if (dir == DMA_MEM_TO_MEM)
@@ -1335,13 +1339,15 @@ static struct dma_chan *pxad_dma_xlate(struct of_phandle_args *dma_spec,
 
 static int pxad_init_dmadev(struct platform_device *op,
 			    struct pxad_device *pdev,
-			    unsigned int nr_phy_chans)
+			    unsigned int nr_phy_chans,
+			    unsigned int nr_requestors)
 {
 	int ret;
 	unsigned int i;
 	struct pxad_chan *c;
 
 	pdev->nr_chans = nr_phy_chans;
+	pdev->nr_requestors = nr_requestors;
 	INIT_LIST_HEAD(&pdev->slave.channels);
 	pdev->slave.device_alloc_chan_resources = pxad_alloc_chan_resources;
 	pdev->slave.device_free_chan_resources = pxad_free_chan_resources;
@@ -1376,7 +1382,7 @@ static int pxad_probe(struct platform_device *op)
 	const struct of_device_id *of_id;
 	struct mmp_dma_platdata *pdata = dev_get_platdata(&op->dev);
 	struct resource *iores;
-	int ret, dma_channels = 0;
+	int ret, dma_channels = 0, nb_requestors = 0;
 	const enum dma_slave_buswidth widths =
 		DMA_SLAVE_BUSWIDTH_1_BYTE   | DMA_SLAVE_BUSWIDTH_2_BYTES |
 		DMA_SLAVE_BUSWIDTH_4_BYTES;
@@ -1393,13 +1399,23 @@ static int pxad_probe(struct platform_device *op)
 		return PTR_ERR(pdev->base);
 
 	of_id = of_match_device(pxad_dt_ids, &op->dev);
-	if (of_id)
+	if (of_id) {
 		of_property_read_u32(op->dev.of_node, "#dma-channels",
 				     &dma_channels);
-	else if (pdata && pdata->dma_channels)
+		ret = of_property_read_u32(op->dev.of_node, "#dma-requests",
+					   &nb_requestors);
+		if (ret) {
+			dev_warn(pdev->slave.dev,
+				 "#dma-requests set to default 32 as missing in OF: %d",
+				 ret);
+			nb_requestors = 32;
+		};
+	} else if (pdata && pdata->dma_channels) {
 		dma_channels = pdata->dma_channels;
-	else
+		nb_requestors = pdata->nb_requestors;
+	} else {
 		dma_channels = 32;	/* default 32 channel */
+	}
 
 	dma_cap_set(DMA_SLAVE, pdev->slave.cap_mask);
 	dma_cap_set(DMA_MEMCPY, pdev->slave.cap_mask);
@@ -1417,7 +1433,7 @@ static int pxad_probe(struct platform_device *op)
 	pdev->slave.descriptor_reuse = true;
 
 	pdev->slave.dev = &op->dev;
-	ret = pxad_init_dmadev(op, pdev, dma_channels);
+	ret = pxad_init_dmadev(op, pdev, dma_channels, nb_requestors);
 	if (ret) {
 		dev_err(pdev->slave.dev, "unable to register\n");
 		return ret;
@@ -1436,7 +1452,8 @@ static int pxad_probe(struct platform_device *op)
 
 	platform_set_drvdata(op, pdev);
 	pxad_init_debugfs(pdev);
-	dev_info(pdev->slave.dev, "initialized %d channels\n", dma_channels);
+	dev_info(pdev->slave.dev, "initialized %d channels on %d requestors\n",
+		 dma_channels, nb_requestors);
 	return 0;
 }
 

include/linux/platform_data/mmp_dma.h

@@ -14,6 +14,7 @@
 
 struct mmp_dma_platdata {
 	int dma_channels;
+	int nb_requestors;
 };
 
 #endif /* MMP_DMA_H */