Merge tag 'berlin-dt-3.19-2' of git://git.infradead.org/users/hesselba/linux-berlin into next/dt

Pull "Berlin DT changes for v3.19 (round 2)" from Sebastian Hesselbarth:

- AHCI and SATA PHY nodes for BG2
- USB and USB PHZ nodes for BG2/BG2CD/BG2Q

* tag 'berlin-dt-3.19-2' of git://git.infradead.org/users/hesselba/linux-berlin:
  ARM: dts: berlin: enable USB on the Google Chromecast
  ARM: dts: berlin: add BG2CD nodes for USB support
  ARM: dts: Berlin: enable USB on the BG2Q DMP
  ARM: dts: berlin: add BG2Q nodes for USB support
  ARM: berlin: Enable SATA on Sony NSZ-GS7
  ARM: berlin: Add AHCI and SATA PHY nodes to BG2

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts

@@ -26,8 +26,15 @@
 	};
 };
 
+&ahci { status = "okay"; };
+
 &eth1 { status = "okay"; };
 
+/* Unpopulated SATA plug on solder side */
+&sata0 { status = "okay"; };
+
+&sata_phy { status = "okay"; };
+
 /* Samsung M8G2FA 8GB eMMC */
 &sdhci2 {
 	non-removable;

arch/arm/boot/dts/berlin2.dtsi

@@ -311,6 +311,45 @@
 			};
 		};
 
+		ahci: sata@e90000 {
+			compatible = "marvell,berlin2-ahci", "generic-ahci";
+			reg = <0xe90000 0x1000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&chip CLKID_SATA>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			sata0: sata-port@0 {
+				reg = <0>;
+				phys = <&sata_phy 0>;
+				status = "disabled";
+			};
+
+			sata1: sata-port@1 {
+				reg = <1>;
+				phys = <&sata_phy 1>;
+				status = "disabled";
+			};
+		};
+
+		sata_phy: phy@e900a0 {
+			compatible = "marvell,berlin2-sata-phy";
+			reg = <0xe900a0 0x200>;
+			clocks = <&chip CLKID_SATA>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#phy-cells = <1>;
+			status = "disabled";
+
+			sata-phy@0 {
+				reg = <0>;
+			};
+
+			sata-phy@1 {
+				reg = <1>;
+			};
+		};
+
 		chip: chip-control@ea0000 {
 			compatible = "marvell,berlin2-chip-ctrl";
 			#clock-cells = <1>;

arch/arm/boot/dts/berlin2cd-google-chromecast.dts

@@ -53,3 +53,7 @@
 };
 
 &uart0 { status = "okay"; };
+
+&usb_phy1 { status = "okay"; };
+
+&usb1 { status = "okay"; };

arch/arm/boot/dts/berlin2cd.dtsi

@@ -75,6 +75,22 @@
 			clocks = <&chip CLKID_TWD>;
 		};
 
+		usb_phy0: usb-phy@b74000 {
+			compatible = "marvell,berlin2cd-usb-phy";
+			reg = <0xb74000 0x128>;
+			#phy-cells = <0>;
+			resets = <&chip 0x178 23>;
+			status = "disabled";
+		};
+
+		usb_phy1: usb-phy@b78000 {
+			compatible = "marvell,berlin2cd-usb-phy";
+			reg = <0xb78000 0x128>;
+			#phy-cells = <0>;
+			resets = <&chip 0x178 24>;
+			status = "disabled";
+		};
+
 		eth1: ethernet@b90000 {
 			compatible = "marvell,pxa168-eth";
 			reg = <0xb90000 0x10000>;
@@ -287,6 +303,26 @@
 			};
 		};
 
+		usb0: usb@ed0000 {
+			compatible = "chipidea,usb2";
+			reg = <0xed0000 0x200>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&chip CLKID_USB0>;
+			phys = <&usb_phy0>;
+			phy-names = "usb-phy";
+			status = "disabled";
+		};
+
+		usb1: usb@ee0000 {
+			compatible = "chipidea,usb2";
+			reg = <0xee0000 0x200>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&chip CLKID_USB1>;
+			phys = <&usb_phy1>;
+			phy-names = "usb-phy";
+			status = "disabled";
+		};
+
 		apb@fc0000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;

arch/arm/boot/dts/berlin2q-marvell-dmp.dts

@@ -7,6 +7,8 @@
  */
 
 /dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
 #include "berlin2q.dtsi"
 
 / {
@@ -21,6 +23,39 @@
 	choosen {
 		bootargs = "console=ttyS0,115200 earlyprintk";
 	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb0_vbus: regulator@0 {
+			compatible = "regulator-fixed";
+			regulator-name = "usb0_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&portb 8 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb1_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&portb 10 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb2_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			regulator-name = "usb2_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&portb 12 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
 };
 
 &sdhci1 {
@@ -46,6 +81,24 @@
 	status = "okay";
 };
 
+&usb_phy0 {
+	status = "okay";
+};
+
+&usb_phy2 {
+	status = "okay";
+};
+
+&usb0 {
+	vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
+
+&usb2 {
+	vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
+
 &eth0 {
 	status = "okay";
 };

arch/arm/boot/dts/berlin2q.dtsi

@@ -114,6 +114,40 @@
 			#interrupt-cells = <3>;
 		};
 
+		usb_phy2: phy@a2f400 {
+			compatible = "marvell,berlin2-usb-phy";
+			reg = <0xa2f400 0x128>;
+			#phy-cells = <0>;
+			resets = <&chip 0x104 14>;
+			status = "disabled";
+		};
+
+		usb2: usb@a30000 {
+			compatible = "chipidea,usb2";
+			reg = <0xa30000 0x10000>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&chip CLKID_USB2>;
+			phys = <&usb_phy2>;
+			phy-names = "usb-phy";
+			status = "disabled";
+		};
+
+		usb_phy0: phy@b74000 {
+			compatible = "marvell,berlin2-usb-phy";
+			reg = <0xb74000 0x128>;
+			#phy-cells = <0>;
+			resets = <&chip 0x104 12>;
+			status = "disabled";
+		};
+
+		usb_phy1: phy@b78000 {
+			compatible = "marvell,berlin2-usb-phy";
+			reg = <0xb78000 0x128>;
+			#phy-cells = <0>;
+			resets = <&chip 0x104 13>;
+			status = "disabled";
+		};
+
 		eth0: ethernet@b90000 {
 			compatible = "marvell,pxa168-eth";
 			reg = <0xb90000 0x10000>;
@@ -404,6 +438,26 @@
 			};
 		};
 
+		usb0: usb@ed0000 {
+			compatible = "chipidea,usb2";
+			reg = <0xed0000 0x10000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&chip CLKID_USB0>;
+			phys = <&usb_phy0>;
+			phy-names = "usb-phy";
+			status = "disabled";
+		};
+
+		usb1: usb@ee0000 {
+			compatible = "chipidea,usb2";
+			reg = <0xee0000 0x10000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&chip CLKID_USB1>;
+			phys = <&usb_phy1>;
+			phy-names = "usb-phy";
+			status = "disabled";
+		};
+
 		apb@fc0000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;