Merge remote-tracking branches 'regulator/topic/rn5t618', 'regulator/topic/rpm', 'regulator/topic/rt5033', 'regulator/topic/s2mpa01' and 'regulator/topic/s2mps11' into regulator-next

drivers/regulator/Kconfig

@@ -521,6 +521,14 @@ config REGULATOR_RN5T618
 	help
 	  Say y here to support the regulators found on Ricoh RN5T618 PMIC.
 
+config REGULATOR_RT5033
+	tristate "Richtek RT5033 Regulators"
+	depends on MFD_RT5033
+	help
+	  This adds support for voltage and current regulators in Richtek
+	  RT5033 PMIC. The device supports multiple regulators like
+	  current source, LDO and Buck.
+
 config REGULATOR_S2MPA01
 	tristate "Samsung S2MPA01 voltage regulator"
 	depends on MFD_SEC_CORE

drivers/regulator/Makefile

@@ -69,6 +69,7 @@ obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
 obj-$(CONFIG_REGULATOR_RC5T583)  += rc5t583-regulator.o
 obj-$(CONFIG_REGULATOR_RK808)   += rk808-regulator.o
 obj-$(CONFIG_REGULATOR_RN5T618) += rn5t618-regulator.o
+obj-$(CONFIG_REGULATOR_RT5033)	+= rt5033-regulator.o
 obj-$(CONFIG_REGULATOR_S2MPA01) += s2mpa01.o
 obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o
 obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o

drivers/regulator/qcom_rpm-regulator.c

@@ -183,6 +183,13 @@ static const struct regulator_linear_range ftsmps_ranges[] = {
 	REGULATOR_LINEAR_RANGE(1500000,  64, 100, 50000),
 };
 
+static const struct regulator_linear_range smb208_ranges[] = {
+	REGULATOR_LINEAR_RANGE( 375000,   0,  29, 12500),
+	REGULATOR_LINEAR_RANGE( 750000,  30,  89, 12500),
+	REGULATOR_LINEAR_RANGE(1500000,  90, 153, 25000),
+	REGULATOR_LINEAR_RANGE(3100000, 154, 234, 25000),
+};
+
 static const struct regulator_linear_range ncp_ranges[] = {
 	REGULATOR_LINEAR_RANGE(1500000,   0,  31, 50000),
 };
@@ -559,6 +566,16 @@ static const struct qcom_rpm_reg pm8921_switch = {
 	.parts = &rpm8960_switch_parts,
 };
 
+static const struct qcom_rpm_reg smb208_smps = {
+	.desc.linear_ranges = smb208_ranges,
+	.desc.n_linear_ranges = ARRAY_SIZE(smb208_ranges),
+	.desc.n_voltages = 235,
+	.desc.ops = &uV_ops,
+	.parts = &rpm8960_smps_parts,
+	.supports_force_mode_auto = false,
+	.supports_force_mode_bypass = false,
+};
+
 static const struct of_device_id rpm_of_match[] = {
 	{ .compatible = "qcom,rpm-pm8058-pldo",     .data = &pm8058_pldo },
 	{ .compatible = "qcom,rpm-pm8058-nldo",     .data = &pm8058_nldo },
@@ -578,6 +595,8 @@ static const struct of_device_id rpm_of_match[] = {
 	{ .compatible = "qcom,rpm-pm8921-ftsmps",   .data = &pm8921_ftsmps },
 	{ .compatible = "qcom,rpm-pm8921-ncp",      .data = &pm8921_ncp },
 	{ .compatible = "qcom,rpm-pm8921-switch",   .data = &pm8921_switch },
+
+	{ .compatible = "qcom,rpm-smb208", .data = &smb208_smps },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, rpm_of_match);

drivers/regulator/rn5t618-regulator.c

@@ -31,6 +31,8 @@ static struct regulator_ops rn5t618_reg_ops = {
 #define REG(rid, ereg, emask, vreg, vmask, min, max, step)		\
 	[RN5T618_##rid] = {						\
 		.name		= #rid,					\
+		.of_match	= of_match_ptr(#rid),			\
+		.regulators_node = of_match_ptr("regulators"),		\
 		.id		= RN5T618_##rid,			\
 		.type		= REGULATOR_VOLTAGE,			\
 		.owner		= THIS_MODULE,				\
@@ -60,60 +62,15 @@ static struct regulator_desc rn5t618_regulators[] = {
 	REG(LDORTC2, LDOEN2, BIT(5), LDORTC2DAC, 0x7f, 900000, 3500000, 25000),
 };
 
-static struct of_regulator_match rn5t618_matches[] = {
-	[RN5T618_DCDC1]		= { .name = "DCDC1" },
-	[RN5T618_DCDC2]		= { .name = "DCDC2" },
-	[RN5T618_DCDC3]		= { .name = "DCDC3" },
-	[RN5T618_LDO1]		= { .name = "LDO1" },
-	[RN5T618_LDO2]		= { .name = "LDO2" },
-	[RN5T618_LDO3]		= { .name = "LDO3" },
-	[RN5T618_LDO4]		= { .name = "LDO4" },
-	[RN5T618_LDO5]		= { .name = "LDO5" },
-	[RN5T618_LDORTC1]	= { .name = "LDORTC1" },
-	[RN5T618_LDORTC2]	= { .name = "LDORTC2" },
-};
-
-static int rn5t618_regulator_parse_dt(struct platform_device *pdev)
-{
-	struct device_node *np, *regulators;
-	int ret;
-
-	np = of_node_get(pdev->dev.parent->of_node);
-	if (!np)
-		return 0;
-
-	regulators = of_get_child_by_name(np, "regulators");
-	if (!regulators) {
-		dev_err(&pdev->dev, "regulators node not found\n");
-		return -EINVAL;
-	}
-
-	ret = of_regulator_match(&pdev->dev, regulators, rn5t618_matches,
-				 ARRAY_SIZE(rn5t618_matches));
-	of_node_put(regulators);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "error parsing regulator init data: %d\n",
-			ret);
-	}
-
-	return 0;
-}
-
 static int rn5t618_regulator_probe(struct platform_device *pdev)
 {
 	struct rn5t618 *rn5t618 = dev_get_drvdata(pdev->dev.parent);
 	struct regulator_config config = { };
 	struct regulator_dev *rdev;
-	int ret, i;
-
-	ret = rn5t618_regulator_parse_dt(pdev);
-	if (ret)
-		return ret;
+	int i;
 
 	for (i = 0; i < RN5T618_REG_NUM; i++) {
-		config.dev = &pdev->dev;
-		config.init_data = rn5t618_matches[i].init_data;
-		config.of_node = rn5t618_matches[i].of_node;
+		config.dev = pdev->dev.parent;
 		config.regmap = rn5t618->regmap;
 
 		rdev = devm_regulator_register(&pdev->dev,

drivers/regulator/rt5033-regulator.c

@@ -0,0 +1,123 @@
+/*
+ * Regulator driver for the Richtek RT5033
+ *
+ * Copyright (C) 2014 Samsung Electronics, Co., Ltd.
+ * Author: Beomho Seo <beomho.seo@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published bythe Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/mfd/rt5033.h>
+#include <linux/mfd/rt5033-private.h>
+#include <linux/regulator/of_regulator.h>
+
+static struct regulator_ops rt5033_safe_ldo_ops = {
+	.is_enabled		= regulator_is_enabled_regmap,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.list_voltage		= regulator_list_voltage_linear,
+};
+
+static struct regulator_ops rt5033_buck_ops = {
+	.is_enabled		= regulator_is_enabled_regmap,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.list_voltage		= regulator_list_voltage_linear,
+	.map_voltage		= regulator_map_voltage_linear,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+};
+
+static const struct regulator_desc rt5033_supported_regulators[] = {
+	[RT5033_BUCK] = {
+		.name		= "BUCK",
+		.id		= RT5033_BUCK,
+		.ops		= &rt5033_buck_ops,
+		.type		= REGULATOR_VOLTAGE,
+		.owner		= THIS_MODULE,
+		.n_voltages	= RT5033_REGULATOR_BUCK_VOLTAGE_STEP_NUM,
+		.min_uV		= RT5033_REGULATOR_BUCK_VOLTAGE_MIN,
+		.uV_step	= RT5033_REGULATOR_BUCK_VOLTAGE_STEP,
+		.enable_reg	= RT5033_REG_CTRL,
+		.enable_mask	= RT5033_CTRL_EN_BUCK_MASK,
+		.vsel_reg	= RT5033_REG_BUCK_CTRL,
+		.vsel_mask	= RT5033_BUCK_CTRL_MASK,
+	},
+	[RT5033_LDO] = {
+		.name		= "LDO",
+		.id		= RT5033_LDO,
+		.ops		= &rt5033_buck_ops,
+		.type		= REGULATOR_VOLTAGE,
+		.owner		= THIS_MODULE,
+		.n_voltages	= RT5033_REGULATOR_LDO_VOLTAGE_STEP_NUM,
+		.min_uV		= RT5033_REGULATOR_LDO_VOLTAGE_MIN,
+		.uV_step	= RT5033_REGULATOR_LDO_VOLTAGE_STEP,
+		.enable_reg	= RT5033_REG_CTRL,
+		.enable_mask	= RT5033_CTRL_EN_LDO_MASK,
+		.vsel_reg	= RT5033_REG_LDO_CTRL,
+		.vsel_mask	= RT5033_LDO_CTRL_MASK,
+	},
+	[RT5033_SAFE_LDO] = {
+		.name		= "SAFE_LDO",
+		.id		= RT5033_SAFE_LDO,
+		.ops		= &rt5033_safe_ldo_ops,
+		.type		= REGULATOR_VOLTAGE,
+		.owner		= THIS_MODULE,
+		.n_voltages	= 1,
+		.min_uV		= RT5033_REGULATOR_SAFE_LDO_VOLTAGE,
+		.enable_reg	= RT5033_REG_CTRL,
+		.enable_mask	= RT5033_CTRL_EN_SAFE_LDO_MASK,
+	},
+};
+
+static int rt5033_regulator_probe(struct platform_device *pdev)
+{
+	struct rt5033_dev *rt5033 = dev_get_drvdata(pdev->dev.parent);
+	int ret, i;
+	struct regulator_config config = {};
+
+	config.dev = &pdev->dev;
+	config.driver_data = rt5033;
+
+	for (i = 0; i < ARRAY_SIZE(rt5033_supported_regulators); i++) {
+		struct regulator_dev *regulator;
+
+		config.regmap = rt5033->regmap;
+
+		regulator = devm_regulator_register(&pdev->dev,
+				&rt5033_supported_regulators[i], &config);
+		if (IS_ERR(regulator)) {
+			ret = PTR_ERR(regulator);
+			dev_err(&pdev->dev,
+				"Regulator init failed %d: with error: %d\n",
+				i, ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static const struct platform_device_id rt5033_regulator_id[] = {
+	{ "rt5033-regulator", },
+	{ }
+};
+MODULE_DEVICE_TABLE(platform, rt5033_regulator_id);
+
+static struct platform_driver rt5033_regulator_driver = {
+	.driver = {
+		.name = "rt5033-regulator",
+	},
+	.probe		= rt5033_regulator_probe,
+	.id_table	= rt5033_regulator_id,
+};
+module_platform_driver(rt5033_regulator_driver);
+
+MODULE_DESCRIPTION("Richtek RT5033 Regulator driver");
+MODULE_AUTHOR("Beomho Seo <beomho.seo@samsung.com>");
+MODULE_LICENSE("GPL");

drivers/regulator/s2mpa01.c

@@ -298,7 +298,7 @@ static struct regulator_ops s2mpa01_buck_ops = {
 	.enable_mask	= S2MPA01_ENABLE_MASK			\
 }
 
-static struct regulator_desc regulators[] = {
+static const struct regulator_desc regulators[] = {
 	regulator_desc_ldo(1, STEP_25_MV),
 	regulator_desc_ldo(2, STEP_50_MV),
 	regulator_desc_ldo(3, STEP_50_MV),

drivers/regulator/s2mps11.c

@@ -845,7 +845,7 @@ static int s2mps11_pmic_probe(struct platform_device *pdev)
 		return -EINVAL;
 	};
 
-	s2mps11->ext_control_gpio = devm_kzalloc(&pdev->dev,
+	s2mps11->ext_control_gpio = devm_kmalloc(&pdev->dev,
 			sizeof(*s2mps11->ext_control_gpio) * s2mps11->rdev_num,
 			GFP_KERNEL);
 	if (!s2mps11->ext_control_gpio)