ARM: DT: imx53: fix lvds channel 1 port

using LVDS channel 1 on an i.MX53 leads to following error:

imx-ldb 53fa8008.ldb: unable to set di0 parent clock to ldb_di1

This comes from imx_ldb_set_clock with mux = 0. Mux parameter must be "1" for
reparenting di1 clock to ldb_di1. The value of the mux param comes from device
tree port settings.

On i.MX5, the internal two-input-multiplexer is used. Due to hardware limitations,
only one port (port@[0,1]) can be used for each channel (lvds-channel@[0,1],
respectively)

Documentation update suggested by Philipp Zabel <p.zabel@pengutronix.de>

Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
Fixes: e05c8c9a790a ("ARM: dts: imx53: Add IPU DI ports and endpoints, move imx-drm node to dtsi")
Cc: <stable@vger.kernel.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/devicetree/bindings/staging/imx-drm/ldb.txt

@@ -56,6 +56,9 @@ Required properties:
  - fsl,data-width : should be <18> or <24>
  - port: A port node with endpoint definitions as defined in
    Documentation/devicetree/bindings/media/video-interfaces.txt.
+   On i.MX5, the internal two-input-multiplexer is used.
+   Due to hardware limitations, only one port (port@[0,1])
+   can be used for each channel (lvds-channel@[0,1], respectively)
    On i.MX6, there should be four ports (port@[0-3]) that correspond
    to the four LVDS multiplexer inputs.
 
@@ -78,6 +81,8 @@ ldb: ldb@53fa8008 {
 		      "di0", "di1";
 
 	lvds-channel@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
 		reg = <0>;
 		fsl,data-mapping = "spwg";
 		fsl,data-width = <24>;
@@ -86,7 +91,9 @@ ldb: ldb@53fa8008 {
 			/* ... */
 		};
 
-		port {
+		port@0 {
+			reg = <0>;
+
 			lvds0_in: endpoint {
 				remote-endpoint = <&ipu_di0_lvds0>;
 			};
@@ -94,6 +101,8 @@ ldb: ldb@53fa8008 {
 	};
 
 	lvds-channel@1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
 		reg = <1>;
 		fsl,data-mapping = "spwg";
 		fsl,data-width = <24>;
@@ -102,7 +111,9 @@ ldb: ldb@53fa8008 {
 			/* ... */
 		};
 
-		port {
+		port@1 {
+			reg = <1>;
+
 			lvds1_in: endpoint {
 				remote-endpoint = <&ipu_di1_lvds1>;
 			};

arch/arm/boot/dts/imx53.dtsi

@@ -423,10 +423,14 @@
 				status = "disabled";
 
 				lvds-channel@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
 					reg = <0>;
 					status = "disabled";
 
-					port {
+					port@0 {
+						reg = <0>;
+
 						lvds0_in: endpoint {
 							remote-endpoint = <&ipu_di0_lvds0>;
 						};
@@ -434,10 +438,14 @@
 				};
 
 				lvds-channel@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
 					reg = <1>;
 					status = "disabled";
 
-					port {
+					port@1 {
+						reg = <1>;
+
 						lvds1_in: endpoint {
 							remote-endpoint = <&ipu_di1_lvds1>;
 						};