Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull timer updates from Thomas Gleixner:
 "A rather large update for timers/timekeeping:

   - compat syscall consolidation (Al Viro)

   - Posix timer consolidation (Christoph Helwig / Thomas Gleixner)

   - Cleanup of the device tree based initialization for clockevents and
     clocksources (Daniel Lezcano)

   - Consolidation of the FTTMR010 clocksource/event driver (Linus
     Walleij)

   - The usual set of small fixes and updates all over the place"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (93 commits)
  timers: Make the cpu base lock raw
  clocksource/drivers/mips-gic-timer: Fix an error code in 'gic_clocksource_of_init()'
  clocksource/drivers/fsl_ftm_timer: Unmap region obtained by of_iomap
  clocksource/drivers/tcb_clksrc: Make IO endian agnostic
  clocksource/drivers/sun4i: Switch to the timer-of common init
  clocksource/drivers/timer-of: Fix invalid iomap check
  Revert "ktime: Simplify ktime_compare implementation"
  clocksource/drivers: Fix uninitialized variable use in timer_of_init
  kselftests: timers: Add test for frequency step
  kselftests: timers: Fix inconsistency-check to not ignore first timestamp
  time: Add warning about imminent deprecation of CONFIG_GENERIC_TIME_VSYSCALL_OLD
  time: Clean up CLOCK_MONOTONIC_RAW time handling
  posix-cpu-timers: Make timespec to nsec conversion safe
  itimer: Make timeval to nsec conversion range limited
  timers: Fix parameter description of try_to_del_timer_sync()
  ktime: Simplify ktime_compare implementation
  clocksource/drivers/fttmr010: Factor out clock read code
  clocksource/drivers/fttmr010: Implement delay timer
  clocksource/drivers: Add timer-of common init routine
  clocksource/drivers/tcb_clksrc: Save timer context on suspend/resume
  ...

Documentation/devicetree/bindings/timer/faraday,fttmr010.txt

@@ -7,7 +7,11 @@ Required properties:
 
 - compatible : Must be one of
   "faraday,fttmr010"
-  "cortina,gemini-timer"
+  "cortina,gemini-timer", "faraday,fttmr010"
+  "moxa,moxart-timer", "faraday,fttmr010"
+  "aspeed,ast2400-timer"
+  "aspeed,ast2500-timer"
+
 - reg : Should contain registers location and length
 - interrupts : Should contain the three timer interrupts usually with
   flags for falling edge

Documentation/devicetree/bindings/timer/moxa,moxart-timer.txt

@@ -1,19 +0,0 @@
-MOXA ART timer
-
-Required properties:
-
-- compatible : Must be one of:
- 	- "moxa,moxart-timer"
- 	- "aspeed,ast2400-timer"
-- reg : Should contain registers location and length
-- interrupts : Should contain the timer interrupt number
-- clocks : Should contain phandle for the clock that drives the counter
-
-Example:
-
-	timer: timer@98400000 {
-		compatible = "moxa,moxart-timer";
-		reg = <0x98400000 0x42>;
-		interrupts = <19 1>;
-		clocks = <&coreclk>;
-	};

arch/arc/include/asm/Kbuild

@@ -36,7 +36,6 @@ generic-y += preempt.h
 generic-y += resource.h
 generic-y += sembuf.h
 generic-y += shmbuf.h
-generic-y += siginfo.h
 generic-y += socket.h
 generic-y += sockios.h
 generic-y += stat.h

arch/arc/include/uapi/asm/Kbuild

@@ -1,2 +1,4 @@
 # UAPI Header export list
 include include/uapi/asm-generic/Kbuild.asm
+
+generic-y += siginfo.h

arch/arc/kernel/setup.c

@@ -470,7 +470,7 @@ void __init setup_arch(char **cmdline_p)
 void __init time_init(void)
 {
 	of_clk_init(NULL);
-	clocksource_probe();
+	timer_probe();
 }
 
 static int __init customize_machine(void)

arch/arm/Kconfig

@@ -337,7 +337,7 @@ config ARCH_MULTIPLATFORM
 	select ARM_HAS_SG_CHAIN
 	select ARM_PATCH_PHYS_VIRT
 	select AUTO_ZRELADDR
-	select CLKSRC_OF
+	select TIMER_OF
 	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
 	select MIGHT_HAVE_PCI
@@ -351,7 +351,7 @@ config ARM_SINGLE_ARMV7M
 	depends on !MMU
 	select ARM_NVIC
 	select AUTO_ZRELADDR
-	select CLKSRC_OF
+	select TIMER_OF
 	select COMMON_CLK
 	select CPU_V7M
 	select GENERIC_CLOCKEVENTS
@@ -532,7 +532,7 @@ config ARCH_PXA
 	select CLKDEV_LOOKUP
 	select CLKSRC_PXA
 	select CLKSRC_MMIO
-	select CLKSRC_OF
+	select TIMER_OF
 	select CPU_XSCALE if !CPU_XSC3
 	select GENERIC_CLOCKEVENTS
 	select GPIO_PXA
@@ -571,7 +571,7 @@ config ARCH_SA1100
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
 	select CLKSRC_PXA
-	select CLKSRC_OF if OF
+	select TIMER_OF if OF
 	select CPU_FREQ
 	select CPU_SA1100
 	select GENERIC_CLOCKEVENTS
@@ -1357,7 +1357,7 @@ config HAVE_ARM_ARCH_TIMER
 
 config HAVE_ARM_TWD
 	bool
-	select CLKSRC_OF if OF
+	select TIMER_OF if OF
 	help
 	  This options enables support for the ARM timer and watchdog unit
 

arch/arm/boot/dts/aspeed-g4.dtsi

@@ -893,6 +893,7 @@
 				//interrupts = <16 17 18 35 36 37 38 39>;
 				interrupts = <16>;
 				clocks = <&clk_apb>;
+				clock-names = "PCLK";
 			};
 
 			wdt1: wdt@1e785000 {

arch/arm/boot/dts/aspeed-g5.dtsi

@@ -1000,6 +1000,7 @@
 				//interrupts = <16 17 18 35 36 37 38 39>;
 				interrupts = <16>;
 				clocks = <&clk_apb>;
+				clock-names = "PCLK";
 			};
 
 

arch/arm/include/asm/Kbuild

@@ -28,7 +28,6 @@ generic-y += segment.h
 generic-y += sembuf.h
 generic-y += serial.h
 generic-y += shmbuf.h
-generic-y += siginfo.h
 generic-y += simd.h
 generic-y += sizes.h
 generic-y += socket.h

arch/arm/include/uapi/asm/Kbuild

@@ -4,3 +4,5 @@ include include/uapi/asm-generic/Kbuild.asm
 genhdr-y += unistd-common.h
 genhdr-y += unistd-oabi.h
 genhdr-y += unistd-eabi.h
+
+generic-y += siginfo.h

arch/arm/kernel/smp_twd.c

@@ -403,7 +403,7 @@ out:
 	WARN(err, "twd_local_timer_of_register failed (%d)\n", err);
 	return err;
 }
-CLOCKSOURCE_OF_DECLARE(arm_twd_a9, "arm,cortex-a9-twd-timer", twd_local_timer_of_register);
-CLOCKSOURCE_OF_DECLARE(arm_twd_a5, "arm,cortex-a5-twd-timer", twd_local_timer_of_register);
-CLOCKSOURCE_OF_DECLARE(arm_twd_11mp, "arm,arm11mp-twd-timer", twd_local_timer_of_register);
+TIMER_OF_DECLARE(arm_twd_a9, "arm,cortex-a9-twd-timer", twd_local_timer_of_register);
+TIMER_OF_DECLARE(arm_twd_a5, "arm,cortex-a5-twd-timer", twd_local_timer_of_register);
+TIMER_OF_DECLARE(arm_twd_11mp, "arm,arm11mp-twd-timer", twd_local_timer_of_register);
 #endif

arch/arm/kernel/time.c

@@ -120,6 +120,6 @@ void __init time_init(void)
 #ifdef CONFIG_COMMON_CLK
 		of_clk_init(NULL);
 #endif
-		clocksource_probe();
+		timer_probe();
 	}
 }

arch/arm/mach-aspeed/Kconfig

@@ -4,7 +4,7 @@ menuconfig ARCH_ASPEED
 	select SRAM
 	select WATCHDOG
 	select ASPEED_WATCHDOG
-	select MOXART_TIMER
+	select FTTMR010_TIMER
 	select MFD_SYSCON
 	select PINCTRL
 	help

arch/arm/mach-bcm/Kconfig

@@ -150,7 +150,7 @@ config ARCH_BCM2835
 	select ARM_ERRATA_411920 if ARCH_MULTI_V6
 	select ARM_TIMER_SP804
 	select HAVE_ARM_ARCH_TIMER if ARCH_MULTI_V7
-	select CLKSRC_OF
+	select TIMER_OF
 	select BCM2835_TIMER
 	select PINCTRL
 	select PINCTRL_BCM2835

arch/arm/mach-clps711x/Kconfig

@@ -2,7 +2,7 @@ menuconfig ARCH_CLPS711X
 	bool "Cirrus Logic EP721x/EP731x-based"
 	depends on ARCH_MULTI_V4T
 	select AUTO_ZRELADDR
-	select CLKSRC_OF
+	select TIMER_OF
 	select CLPS711X_TIMER
 	select COMMON_CLK
 	select CPU_ARM720T

arch/arm/mach-mediatek/mediatek.c

@@ -41,7 +41,7 @@ static void __init mediatek_timer_init(void)
 	}
 
 	of_clk_init(NULL);
-	clocksource_probe();
+	timer_probe();
 };
 
 static const char * const mediatek_board_dt_compat[] = {

arch/arm/mach-moxart/Kconfig

@@ -4,7 +4,7 @@ menuconfig ARCH_MOXART
 	select CPU_FA526
 	select ARM_DMA_MEM_BUFFERABLE
 	select FARADAY_FTINTC010
-	select MOXART_TIMER
+	select FTTMR010_TIMER
 	select GPIOLIB
 	select PHYLIB if NETDEVICES
 	help

arch/arm/mach-omap2/timer.c

@@ -497,7 +497,7 @@ void __init omap_init_time(void)
 	__omap_sync32k_timer_init(1, "timer_32k_ck", "ti,timer-alwon",
 			2, "timer_sys_ck", NULL, false);
 
-	clocksource_probe();
+	timer_probe();
 }
 
 #if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM43XX)
@@ -506,7 +506,7 @@ void __init omap3_secure_sync32k_timer_init(void)
 	__omap_sync32k_timer_init(12, "secure_32k_fck", "ti,timer-secure",
 			2, "timer_sys_ck", NULL, false);
 
-	clocksource_probe();
+	timer_probe();
 }
 #endif /* CONFIG_ARCH_OMAP3 */
 
@@ -517,7 +517,7 @@ void __init omap3_gptimer_timer_init(void)
 	__omap_sync32k_timer_init(2, "timer_sys_ck", NULL,
 			1, "timer_sys_ck", "ti,timer-alwon", true);
 	if (of_have_populated_dt())
-		clocksource_probe();
+		timer_probe();
 }
 #endif
 
@@ -532,7 +532,7 @@ static void __init omap4_sync32k_timer_init(void)
 void __init omap4_local_timer_init(void)
 {
 	omap4_sync32k_timer_init();
-	clocksource_probe();
+	timer_probe();
 }
 #endif
 
@@ -656,7 +656,7 @@ void __init omap5_realtime_timer_init(void)
 	omap4_sync32k_timer_init();
 	realtime_counter_init();
 
-	clocksource_probe();
+	timer_probe();
 }
 #endif /* CONFIG_SOC_OMAP5 || CONFIG_SOC_DRA7XX */
 

arch/arm/mach-rockchip/rockchip.c

@@ -55,7 +55,7 @@ static void __init rockchip_timer_init(void)
 	}
 
 	of_clk_init(NULL);
-	clocksource_probe();
+	timer_probe();
 }
 
 static void __init rockchip_dt_init(void)

arch/arm/mach-s3c24xx/Kconfig

@@ -394,7 +394,7 @@ config MACH_SMDK2416
 
 config MACH_S3C2416_DT
 	bool "Samsung S3C2416 machine using devicetree"
-	select CLKSRC_OF
+	select TIMER_OF
 	select USE_OF
 	select PINCTRL
 	select PINCTRL_S3C24XX

arch/arm/mach-s3c64xx/Kconfig

@@ -336,7 +336,7 @@ config MACH_WLF_CRAGG_6410
 
 config MACH_S3C64XX_DT
 	bool "Samsung S3C6400/S3C6410 machine using Device Tree"
-	select CLKSRC_OF
+	select TIMER_OF
 	select CPU_S3C6400
 	select CPU_S3C6410
 	select PINCTRL

arch/arm/mach-shmobile/setup-rcar-gen2.c

@@ -113,7 +113,7 @@ void __init rcar_gen2_timer_init(void)
 #endif /* CONFIG_ARM_ARCH_TIMER */
 
 	of_clk_init(NULL);
-	clocksource_probe();
+	timer_probe();
 }
 
 struct memory_reserve_config {

arch/arm/mach-spear/spear13xx.c

@@ -124,5 +124,5 @@ void __init spear13xx_timer_init(void)
 	clk_put(pclk);
 
 	spear_setup_of_timer();
-	clocksource_probe();
+	timer_probe();
 }

arch/arm/mach-sunxi/sunxi.c

@@ -42,7 +42,7 @@ static void __init sun6i_timer_init(void)
 	of_clk_init(NULL);
 	if (IS_ENABLED(CONFIG_RESET_CONTROLLER))
 		sun6i_reset_init();
-	clocksource_probe();
+	timer_probe();
 }
 
 DT_MACHINE_START(SUN6I_DT, "Allwinner sun6i (A31) Family")

arch/arm/mach-u300/core.c

@@ -407,7 +407,7 @@ static const char * u300_board_compat[] = {
 DT_MACHINE_START(U300_DT, "U300 S335/B335 (Device Tree)")
 	.map_io		= u300_map_io,
 	.init_irq	= u300_init_irq_dt,
-	.init_time	= clocksource_probe,
+	.init_time	= timer_probe,
 	.init_machine	= u300_init_machine_dt,
 	.restart	= u300_restart,
 	.dt_compat      = u300_board_compat,

arch/arm/mach-zynq/common.c

@@ -150,7 +150,7 @@ static void __init zynq_timer_init(void)
 {
 	zynq_clock_init();
 	of_clk_init(NULL);
-	clocksource_probe();
+	timer_probe();
 }
 
 static struct map_desc zynq_cortex_a9_scu_map __initdata = {

arch/arm64/Kconfig.platforms

@@ -18,7 +18,7 @@ config ARCH_ALPINE
 
 config ARCH_BCM2835
 	bool "Broadcom BCM2835 family"
-	select CLKSRC_OF
+	select TIMER_OF
 	select GPIOLIB
 	select PINCTRL
 	select PINCTRL_BCM2835
@@ -178,7 +178,7 @@ config ARCH_TEGRA
 	select ARCH_HAS_RESET_CONTROLLER
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
-	select CLKSRC_OF
+	select TIMER_OF
 	select GENERIC_CLOCKEVENTS
 	select GPIOLIB
 	select PINCTRL

arch/arm64/kernel/time.c

@@ -70,7 +70,7 @@ void __init time_init(void)
 	u32 arch_timer_rate;
 
 	of_clk_init(NULL);
-	clocksource_probe();
+	timer_probe();
 
 	tick_setup_hrtimer_broadcast();
 

arch/arm64/kernel/vdso.c

@@ -220,10 +220,8 @@ void update_vsyscall(struct timekeeper *tk)
 	if (!use_syscall) {
 		/* tkr_mono.cycle_last == tkr_raw.cycle_last */
 		vdso_data->cs_cycle_last	= tk->tkr_mono.cycle_last;
-		vdso_data->raw_time_sec		= tk->raw_time.tv_sec;
-		vdso_data->raw_time_nsec	= (tk->raw_time.tv_nsec <<
-						   tk->tkr_raw.shift) +
-						  tk->tkr_raw.xtime_nsec;
+		vdso_data->raw_time_sec         = tk->raw_sec;
+		vdso_data->raw_time_nsec        = tk->tkr_raw.xtime_nsec;
 		vdso_data->xtime_clock_sec	= tk->xtime_sec;
 		vdso_data->xtime_clock_nsec	= tk->tkr_mono.xtime_nsec;
 		vdso_data->cs_mono_mult		= tk->tkr_mono.mult;

arch/c6x/include/asm/Kbuild

@@ -45,7 +45,6 @@ generic-y += sembuf.h
 generic-y += serial.h
 generic-y += shmbuf.h
 generic-y += shmparam.h
-generic-y += siginfo.h
 generic-y += signal.h
 generic-y += socket.h
 generic-y += sockios.h

arch/c6x/include/uapi/asm/Kbuild

@@ -2,3 +2,4 @@
 include include/uapi/asm-generic/Kbuild.asm
 
 generic-y += kvm_para.h
+generic-y += siginfo.h

arch/cris/include/asm/Kbuild

@@ -36,7 +36,6 @@ generic-y += resource.h
 generic-y += sections.h
 generic-y += sembuf.h
 generic-y += shmbuf.h
-generic-y += siginfo.h
 generic-y += socket.h
 generic-y += sockios.h
 generic-y += statfs.h

arch/cris/include/uapi/asm/Kbuild

@@ -1,2 +1,4 @@
 # UAPI Header export list
 include include/uapi/asm-generic/Kbuild.asm
+
+generic-y += siginfo.h

arch/h8300/Kconfig

@@ -15,7 +15,7 @@ config H8300
 	select OF_IRQ
 	select OF_EARLY_FLATTREE
 	select HAVE_MEMBLOCK
-	select CLKSRC_OF
+	select TIMER_OF
 	select H8300_TMR8
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_LZO

arch/h8300/include/asm/Kbuild

@@ -54,7 +54,6 @@ generic-y += serial.h
 generic-y += setup.h
 generic-y += shmbuf.h
 generic-y += shmparam.h
-generic-y += siginfo.h
 generic-y += sizes.h
 generic-y += socket.h
 generic-y += sockios.h

arch/h8300/include/uapi/asm/Kbuild

@@ -1,2 +1,4 @@
 # UAPI Header export list
 include include/uapi/asm-generic/Kbuild.asm
+
+generic-y += siginfo.h

arch/h8300/kernel/setup.c

@@ -246,5 +246,5 @@ void __init calibrate_delay(void)
 void __init time_init(void)
 {
 	of_clk_init(NULL);
-	clocksource_probe();
+	timer_probe();
 }

arch/hexagon/include/asm/Kbuild

@@ -41,7 +41,6 @@ generic-y += sembuf.h
 generic-y += serial.h
 generic-y += shmbuf.h
 generic-y += shmparam.h
-generic-y += siginfo.h
 generic-y += sizes.h
 generic-y += socket.h
 generic-y += sockios.h

arch/hexagon/include/uapi/asm/Kbuild

@@ -1,2 +1,4 @@
 # UAPI Header export list
 include include/uapi/asm-generic/Kbuild.asm
+
+generic-y += siginfo.h

arch/ia64/include/asm/siginfo.h

@@ -1,23 +0,0 @@
-/*
- * Based on <asm-i386/siginfo.h>.
- *
- * Modified 1998-2002
- *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
- */
-#ifndef _ASM_IA64_SIGINFO_H
-#define _ASM_IA64_SIGINFO_H
-
-#include <linux/string.h>
-#include <uapi/asm/siginfo.h>
-
-static inline void
-copy_siginfo (siginfo_t *to, siginfo_t *from)
-{
-	if (from->si_code < 0)
-		memcpy(to, from, sizeof(siginfo_t));
-	else
-		/* _sigchld is currently the largest know union member */
-		memcpy(to, from, 4*sizeof(int) + sizeof(from->_sifields._sigchld));
-}
-
-#endif /* _ASM_IA64_SIGINFO_H */

arch/ia64/include/uapi/asm/siginfo.h

@@ -11,7 +11,6 @@
 #define __ARCH_SI_PREAMBLE_SIZE	(4 * sizeof(int))
 
 #define HAVE_ARCH_SIGINFO_T
-#define HAVE_ARCH_COPY_SIGINFO
 #define HAVE_ARCH_COPY_SIGINFO_TO_USER
 
 #include <asm-generic/siginfo.h>

arch/m32r/include/uapi/asm/Kbuild

@@ -1,2 +1,4 @@
 # UAPI Header export list
 include include/uapi/asm-generic/Kbuild.asm
+
+generic-y	+= siginfo.h

arch/m32r/include/uapi/asm/siginfo.h

@@ -1,6 +0,0 @@
-#ifndef _M32R_SIGINFO_H
-#define _M32R_SIGINFO_H
-
-#include <asm-generic/siginfo.h>
-
-#endif /* _M32R_SIGINFO_H */

arch/m68k/include/asm/Kbuild

@@ -25,7 +25,6 @@ generic-y += preempt.h
 generic-y += resource.h
 generic-y += sections.h
 generic-y += shmparam.h
-generic-y += siginfo.h
 generic-y += spinlock.h
 generic-y += statfs.h
 generic-y += termios.h

arch/m68k/include/uapi/asm/Kbuild

@@ -5,6 +5,7 @@ generic-y += auxvec.h
 generic-y += msgbuf.h
 generic-y += sembuf.h
 generic-y += shmbuf.h
+generic-y += siginfo.h
 generic-y += socket.h
 generic-y += sockios.h
 generic-y += termbits.h

arch/microblaze/Kconfig

@@ -4,7 +4,7 @@ config MICROBLAZE
 	select ARCH_MIGHT_HAVE_PC_PARPORT
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select BUILDTIME_EXTABLE_SORT
-	select CLKSRC_OF
+	select TIMER_OF
 	select CLONE_BACKWARDS3
 	select COMMON_CLK
 	select GENERIC_ATOMIC64

arch/microblaze/include/uapi/asm/Kbuild

@@ -2,3 +2,4 @@
 include include/uapi/asm-generic/Kbuild.asm
 
 generic-y += types.h
+generic-y += siginfo.h

arch/microblaze/kernel/setup.c

@@ -192,7 +192,7 @@ void __init time_init(void)
 {
 	of_clk_init(NULL);
 	setup_cpuinfo_clk();
-	clocksource_probe();
+	timer_probe();
 }
 
 #ifdef CONFIG_DEBUG_FS

arch/microblaze/kernel/timer.c

@@ -335,5 +335,5 @@ static int __init xilinx_timer_init(struct device_node *timer)
 	return 0;
 }
 
-CLOCKSOURCE_OF_DECLARE(xilinx_timer, "xlnx,xps-timer-1.00.a",
+TIMER_OF_DECLARE(xilinx_timer, "xlnx,xps-timer-1.00.a",
 		       xilinx_timer_init);

arch/mips/generic/init.c

@@ -161,7 +161,7 @@ void __init plat_time_init(void)
 		}
 	}
 
-	clocksource_probe();
+	timer_probe();
 }
 
 void __init arch_init_irq(void)

arch/mips/mti-malta/malta-time.c

@@ -265,7 +265,7 @@ void __init plat_time_init(void)
 		       (freq%1000000)*100/1000000);
 #ifdef CONFIG_CLKSRC_MIPS_GIC
 		update_gic_frequency_dt();
-		clocksource_probe();
+		timer_probe();
 #endif
 	}
 #endif

arch/mips/pic32/pic32mzda/time.c

@@ -64,5 +64,5 @@ void __init plat_time_init(void)
 	pr_info("CPU Clock: %ldMHz\n", rate / 1000000);
 	mips_hpt_frequency = rate / 2;
 
-	clocksource_probe();
+	timer_probe();
 }

arch/mips/pistachio/time.c

@@ -39,7 +39,7 @@ void __init plat_time_init(void)
 	struct clk *clk;
 
 	of_clk_init(NULL);
-	clocksource_probe();
+	timer_probe();
 
 	np = of_get_cpu_node(0, NULL);
 	if (!np) {

arch/mips/ralink/Kconfig

@@ -4,7 +4,7 @@ config CLKEVT_RT3352
 	bool
 	depends on SOC_RT305X || SOC_MT7620
 	default y
-	select CLKSRC_OF
+	select TIMER_OF
 	select CLKSRC_MMIO
 
 config RALINK_ILL_ACC

arch/mips/ralink/cevt-rt3352.c

@@ -152,4 +152,4 @@ static int __init ralink_systick_init(struct device_node *np)
 	return 0;
 }
 
-CLOCKSOURCE_OF_DECLARE(systick, "ralink,cevt-systick", ralink_systick_init);
+TIMER_OF_DECLARE(systick, "ralink,cevt-systick", ralink_systick_init);

arch/mips/ralink/clk.c

@@ -82,5 +82,5 @@ void __init plat_time_init(void)
 	pr_info("CPU Clock: %ldMHz\n", clk_get_rate(clk) / 1000000);
 	mips_hpt_frequency = clk_get_rate(clk) / 2;
 	clk_put(clk);
-	clocksource_probe();
+	timer_probe();
 }

arch/mips/ralink/timer-gic.c

@@ -20,5 +20,5 @@ void __init plat_time_init(void)
 	ralink_of_remap();
 
 	of_clk_init(NULL);
-	clocksource_probe();
+	timer_probe();
 }

arch/mips/xilfpga/time.c

@@ -22,7 +22,7 @@ void __init plat_time_init(void)
 	struct clk *clk;
 
 	of_clk_init(NULL);
-	clocksource_probe();
+	timer_probe();
 
 	np = of_get_cpu_node(0, NULL);
 	if (!np) {

arch/mn10300/include/uapi/asm/Kbuild

@@ -1,2 +1,4 @@
 # UAPI Header export list
 include include/uapi/asm-generic/Kbuild.asm
+
+generic-y	+= siginfo.h

arch/mn10300/include/uapi/asm/siginfo.h

@@ -1 +0,0 @@
-#include <asm-generic/siginfo.h>

arch/nios2/Kconfig

@@ -1,6 +1,6 @@
 config NIOS2
 	def_bool y
-	select CLKSRC_OF
+	select TIMER_OF
 	select GENERIC_ATOMIC64
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_CPU_DEVICES

arch/nios2/include/asm/Kbuild

@@ -47,7 +47,6 @@ generic-y += segment.h
 generic-y += sembuf.h
 generic-y += serial.h
 generic-y += shmbuf.h
-generic-y += siginfo.h
 generic-y += signal.h
 generic-y += socket.h
 generic-y += sockios.h

arch/nios2/include/uapi/asm/Kbuild

@@ -2,4 +2,5 @@
 include include/uapi/asm-generic/Kbuild.asm
 
 generic-y += setup.h
+generic-y += siginfo.h
 generic-y += ucontext.h

arch/nios2/kernel/time.c

@@ -350,7 +350,7 @@ void __init time_init(void)
 	if (count < 2)
 		panic("%d timer is found, it needs 2 timers in system\n", count);
 
-	clocksource_probe();
+	timer_probe();
 }
 
-CLOCKSOURCE_OF_DECLARE(nios2_timer, ALTR_TIMER_COMPATIBLE, nios2_time_init);
+TIMER_OF_DECLARE(nios2_timer, ALTR_TIMER_COMPATIBLE, nios2_time_init);

arch/openrisc/include/asm/Kbuild

@@ -46,7 +46,6 @@ generic-y += sembuf.h
 generic-y += setup.h
 generic-y += shmbuf.h
 generic-y += shmparam.h
-generic-y += siginfo.h
 generic-y += signal.h
 generic-y += socket.h
 generic-y += sockios.h

arch/openrisc/include/uapi/asm/Kbuild

@@ -1,2 +1,4 @@
 # UAPI Header export list
 include include/uapi/asm-generic/Kbuild.asm
+
+generic-y += siginfo.h

arch/score/include/uapi/asm/Kbuild

@@ -1,2 +1,4 @@
 # UAPI Header export list
 include include/uapi/asm-generic/Kbuild.asm
+
+generic-y	+= siginfo.h

arch/score/include/uapi/asm/siginfo.h

@@ -1,6 +0,0 @@
-#ifndef _ASM_SCORE_SIGINFO_H
-#define _ASM_SCORE_SIGINFO_H
-
-#include <asm-generic/siginfo.h>
-
-#endif /* _ASM_SCORE_SIGINFO_H */

arch/sh/boards/Kconfig

@@ -10,7 +10,7 @@ config SH_DEVICE_TREE
 	bool "Board Described by Device Tree"
 	select OF
 	select OF_EARLY_FLATTREE
-	select CLKSRC_OF
+	select TIMER_OF
 	select COMMON_CLK
 	select GENERIC_CALIBRATE_DELAY
 	help

arch/sh/boards/of-generic.c

@@ -119,7 +119,7 @@ static void __init sh_of_mem_reserve(void)
 static void __init sh_of_time_init(void)
 {
 	pr_info("SH generic board support: scanning for clocksource devices\n");
-	clocksource_probe();
+	timer_probe();
 }
 
 static void __init sh_of_setup(char **cmdline_p)

arch/sh/include/asm/Kbuild

@@ -29,7 +29,6 @@ generic-y += rwsem.h
 generic-y += sembuf.h
 generic-y += serial.h
 generic-y += shmbuf.h
-generic-y += siginfo.h
 generic-y += sizes.h
 generic-y += socket.h
 generic-y += statfs.h

arch/sh/include/uapi/asm/Kbuild

@@ -1,2 +1,4 @@
 # UAPI Header export list
 include include/uapi/asm-generic/Kbuild.asm
+
+generic-y += siginfo.h

arch/sparc/include/asm/siginfo.h

@@ -1,13 +0,0 @@
-#ifndef __SPARC_SIGINFO_H
-#define __SPARC_SIGINFO_H
-
-#include <uapi/asm/siginfo.h>
-
-
-#ifdef CONFIG_COMPAT
-
-struct compat_siginfo;
-
-#endif /* CONFIG_COMPAT */
-
-#endif /* !(__SPARC_SIGINFO_H) */

arch/unicore32/include/asm/Kbuild

@@ -44,7 +44,6 @@ generic-y += serial.h
 generic-y += setup.h
 generic-y += shmbuf.h
 generic-y += shmparam.h
-generic-y += siginfo.h
 generic-y += signal.h
 generic-y += sizes.h
 generic-y += socket.h

arch/unicore32/include/uapi/asm/Kbuild

@@ -2,3 +2,4 @@
 include include/uapi/asm-generic/Kbuild.asm
 
 generic-y += kvm_para.h
+generic-y += siginfo.h

arch/xtensa/include/asm/Kbuild

@@ -25,7 +25,6 @@ generic-y += preempt.h
 generic-y += resource.h
 generic-y += rwsem.h
 generic-y += sections.h
-generic-y += siginfo.h
 generic-y += statfs.h
 generic-y += termios.h
 generic-y += topology.h

arch/xtensa/include/uapi/asm/Kbuild

@@ -1,2 +1,3 @@
 # UAPI Header export list
 include include/uapi/asm-generic/Kbuild.asm
+generic-y += siginfo.h

arch/xtensa/kernel/time.c

@@ -187,7 +187,7 @@ void __init time_init(void)
 	local_timer_setup(0);
 	setup_irq(this_cpu_ptr(&ccount_timer)->evt.irq, &timer_irqaction);
 	sched_clock_register(ccount_sched_clock_read, 32, ccount_freq);
-	clocksource_probe();
+	timer_probe();
 }
 
 /*

drivers/char/Kconfig

@@ -539,15 +539,6 @@ config HANGCHECK_TIMER
 	  out to lunch past a certain margin.  It can reboot the system
 	  or merely print a warning.
 
-config MMTIMER
-	tristate "MMTIMER Memory mapped RTC for SGI Altix"
-	depends on IA64_GENERIC || IA64_SGI_SN2
-	depends on POSIX_TIMERS
-	default y
-	help
-	  The mmtimer device allows direct userspace access to the
-	  Altix system timer.
-
 config UV_MMTIMER
 	tristate "UV_MMTIMER Memory mapped RTC for SGI UV"
 	depends on X86_UV

drivers/char/Makefile

@@ -10,7 +10,6 @@ obj-$(CONFIG_VIRTIO_CONSOLE)	+= virtio_console.o
 obj-$(CONFIG_RAW_DRIVER)	+= raw.o
 obj-$(CONFIG_SGI_SNSC)		+= snsc.o snsc_event.o
 obj-$(CONFIG_MSPEC)		+= mspec.o
-obj-$(CONFIG_MMTIMER)		+= mmtimer.o
 obj-$(CONFIG_UV_MMTIMER)	+= uv_mmtimer.o
 obj-$(CONFIG_IBM_BSR)		+= bsr.o
 obj-$(CONFIG_SGI_MBCS)		+= mbcs.o

drivers/char/mmtimer.c

@@ -1,858 +0,0 @@
-/*
- * Timer device implementation for SGI SN platforms.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2001-2006 Silicon Graphics, Inc.  All rights reserved.
- *
- * This driver exports an API that should be supportable by any HPET or IA-PC
- * multimedia timer.  The code below is currently specific to the SGI Altix
- * SHub RTC, however.
- *
- * 11/01/01 - jbarnes - initial revision
- * 9/10/04 - Christoph Lameter - remove interrupt support for kernel inclusion
- * 10/1/04 - Christoph Lameter - provide posix clock CLOCK_SGI_CYCLE
- * 10/13/04 - Christoph Lameter, Dimitri Sivanich - provide timer interrupt
- *		support via the posix timer interface
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/ioctl.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/mm.h>
-#include <linux/fs.h>
-#include <linux/mmtimer.h>
-#include <linux/miscdevice.h>
-#include <linux/posix-timers.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/math64.h>
-#include <linux/mutex.h>
-#include <linux/slab.h>
-
-#include <linux/uaccess.h>
-#include <asm/sn/addrs.h>
-#include <asm/sn/intr.h>
-#include <asm/sn/shub_mmr.h>
-#include <asm/sn/nodepda.h>
-#include <asm/sn/shubio.h>
-
-MODULE_AUTHOR("Jesse Barnes <jbarnes@sgi.com>");
-MODULE_DESCRIPTION("SGI Altix RTC Timer");
-MODULE_LICENSE("GPL");
-
-/* name of the device, usually in /dev */
-#define MMTIMER_NAME "mmtimer"
-#define MMTIMER_DESC "SGI Altix RTC Timer"
-#define MMTIMER_VERSION "2.1"
-
-#define RTC_BITS 55 /* 55 bits for this implementation */
-
-static struct k_clock sgi_clock;
-
-extern unsigned long sn_rtc_cycles_per_second;
-
-#define RTC_COUNTER_ADDR        ((long *)LOCAL_MMR_ADDR(SH_RTC))
-
-#define rtc_time()              (*RTC_COUNTER_ADDR)
-
-static DEFINE_MUTEX(mmtimer_mutex);
-static long mmtimer_ioctl(struct file *file, unsigned int cmd,
-						unsigned long arg);
-static int mmtimer_mmap(struct file *file, struct vm_area_struct *vma);
-
-/*
- * Period in femtoseconds (10^-15 s)
- */
-static unsigned long mmtimer_femtoperiod = 0;
-
-static const struct file_operations mmtimer_fops = {
-	.owner = THIS_MODULE,
-	.mmap =	mmtimer_mmap,
-	.unlocked_ioctl = mmtimer_ioctl,
-	.llseek = noop_llseek,
-};
-
-/*
- * We only have comparison registers RTC1-4 currently available per
- * node.  RTC0 is used by SAL.
- */
-/* Check for an RTC interrupt pending */
-static int mmtimer_int_pending(int comparator)
-{
-	if (HUB_L((unsigned long *)LOCAL_MMR_ADDR(SH_EVENT_OCCURRED)) &
-			SH_EVENT_OCCURRED_RTC1_INT_MASK << comparator)
-		return 1;
-	else
-		return 0;
-}
-
-/* Clear the RTC interrupt pending bit */
-static void mmtimer_clr_int_pending(int comparator)
-{
-	HUB_S((u64 *)LOCAL_MMR_ADDR(SH_EVENT_OCCURRED_ALIAS),
-		SH_EVENT_OCCURRED_RTC1_INT_MASK << comparator);
-}
-
-/* Setup timer on comparator RTC1 */
-static void mmtimer_setup_int_0(int cpu, u64 expires)
-{
-	u64 val;
-
-	/* Disable interrupt */
-	HUB_S((u64 *)LOCAL_MMR_ADDR(SH_RTC1_INT_ENABLE), 0UL);
-
-	/* Initialize comparator value */
-	HUB_S((u64 *)LOCAL_MMR_ADDR(SH_INT_CMPB), -1L);
-
-	/* Clear pending bit */
-	mmtimer_clr_int_pending(0);
-
-	val = ((u64)SGI_MMTIMER_VECTOR << SH_RTC1_INT_CONFIG_IDX_SHFT) |
-		((u64)cpu_physical_id(cpu) <<
-			SH_RTC1_INT_CONFIG_PID_SHFT);
-
-	/* Set configuration */
-	HUB_S((u64 *)LOCAL_MMR_ADDR(SH_RTC1_INT_CONFIG), val);
-
-	/* Enable RTC interrupts */
-	HUB_S((u64 *)LOCAL_MMR_ADDR(SH_RTC1_INT_ENABLE), 1UL);
-
-	/* Initialize comparator value */
-	HUB_S((u64 *)LOCAL_MMR_ADDR(SH_INT_CMPB), expires);
-
-
-}
-
-/* Setup timer on comparator RTC2 */
-static void mmtimer_setup_int_1(int cpu, u64 expires)
-{
-	u64 val;
-
-	HUB_S((u64 *)LOCAL_MMR_ADDR(SH_RTC2_INT_ENABLE), 0UL);
-
-	HUB_S((u64 *)LOCAL_MMR_ADDR(SH_INT_CMPC), -1L);
-
-	mmtimer_clr_int_pending(1);
-
-	val = ((u64)SGI_MMTIMER_VECTOR << SH_RTC2_INT_CONFIG_IDX_SHFT) |
-		((u64)cpu_physical_id(cpu) <<
-			SH_RTC2_INT_CONFIG_PID_SHFT);
-
-	HUB_S((u64 *)LOCAL_MMR_ADDR(SH_RTC2_INT_CONFIG), val);
-
-	HUB_S((u64 *)LOCAL_MMR_ADDR(SH_RTC2_INT_ENABLE), 1UL);
-
-	HUB_S((u64 *)LOCAL_MMR_ADDR(SH_INT_CMPC), expires);
-}
-
-/* Setup timer on comparator RTC3 */
-static void mmtimer_setup_int_2(int cpu, u64 expires)
-{
-	u64 val;
-
-	HUB_S((u64 *)LOCAL_MMR_ADDR(SH_RTC3_INT_ENABLE), 0UL);
-
-	HUB_S((u64 *)LOCAL_MMR_ADDR(SH_INT_CMPD), -1L);
-
-	mmtimer_clr_int_pending(2);
-
-	val = ((u64)SGI_MMTIMER_VECTOR << SH_RTC3_INT_CONFIG_IDX_SHFT) |
-		((u64)cpu_physical_id(cpu) <<
-			SH_RTC3_INT_CONFIG_PID_SHFT);
-
-	HUB_S((u64 *)LOCAL_MMR_ADDR(SH_RTC3_INT_CONFIG), val);
-
-	HUB_S((u64 *)LOCAL_MMR_ADDR(SH_RTC3_INT_ENABLE), 1UL);
-
-	HUB_S((u64 *)LOCAL_MMR_ADDR(SH_INT_CMPD), expires);
-}
-
-/*
- * This function must be called with interrupts disabled and preemption off
- * in order to insure that the setup succeeds in a deterministic time frame.
- * It will check if the interrupt setup succeeded.
- */
-static int mmtimer_setup(int cpu, int comparator, unsigned long expires,
-	u64 *set_completion_time)
-{
-	switch (comparator) {
-	case 0:
-		mmtimer_setup_int_0(cpu, expires);
-		break;
-	case 1:
-		mmtimer_setup_int_1(cpu, expires);
-		break;
-	case 2:
-		mmtimer_setup_int_2(cpu, expires);
-		break;
-	}
-	/* We might've missed our expiration time */
-	*set_completion_time = rtc_time();
-	if (*set_completion_time <= expires)
-		return 1;
-
-	/*
-	 * If an interrupt is already pending then its okay
-	 * if not then we failed
-	 */
-	return mmtimer_int_pending(comparator);
-}
-
-static int mmtimer_disable_int(long nasid, int comparator)
-{
-	switch (comparator) {
-	case 0:
-		nasid == -1 ? HUB_S((u64 *)LOCAL_MMR_ADDR(SH_RTC1_INT_ENABLE),
-			0UL) : REMOTE_HUB_S(nasid, SH_RTC1_INT_ENABLE, 0UL);
-		break;
-	case 1:
-		nasid == -1 ? HUB_S((u64 *)LOCAL_MMR_ADDR(SH_RTC2_INT_ENABLE),
-			0UL) : REMOTE_HUB_S(nasid, SH_RTC2_INT_ENABLE, 0UL);
-		break;
-	case 2:
-		nasid == -1 ? HUB_S((u64 *)LOCAL_MMR_ADDR(SH_RTC3_INT_ENABLE),
-			0UL) : REMOTE_HUB_S(nasid, SH_RTC3_INT_ENABLE, 0UL);
-		break;
-	default:
-		return -EFAULT;
-	}
-	return 0;
-}
-
-#define COMPARATOR	1		/* The comparator to use */
-
-#define TIMER_OFF	0xbadcabLL	/* Timer is not setup */
-#define TIMER_SET	0		/* Comparator is set for this timer */
-
-#define MMTIMER_INTERVAL_RETRY_INCREMENT_DEFAULT 40
-
-/* There is one of these for each timer */
-struct mmtimer {
-	struct rb_node list;
-	struct k_itimer *timer;
-	int cpu;
-};
-
-struct mmtimer_node {
-	spinlock_t lock ____cacheline_aligned;
-	struct rb_root timer_head;
-	struct rb_node *next;
-	struct tasklet_struct tasklet;
-};
-static struct mmtimer_node *timers;
-
-static unsigned mmtimer_interval_retry_increment =
-	MMTIMER_INTERVAL_RETRY_INCREMENT_DEFAULT;
-module_param(mmtimer_interval_retry_increment, uint, 0644);
-MODULE_PARM_DESC(mmtimer_interval_retry_increment,
-	"RTC ticks to add to expiration on interval retry (default 40)");
-
-/*
- * Add a new mmtimer struct to the node's mmtimer list.
- * This function assumes the struct mmtimer_node is locked.
- */
-static void mmtimer_add_list(struct mmtimer *n)
-{
-	int nodeid = n->timer->it.mmtimer.node;
-	unsigned long expires = n->timer->it.mmtimer.expires;
-	struct rb_node **link = &timers[nodeid].timer_head.rb_node;
-	struct rb_node *parent = NULL;
-	struct mmtimer *x;
-
-	/*
-	 * Find the right place in the rbtree:
-	 */
-	while (*link) {
-		parent = *link;
-		x = rb_entry(parent, struct mmtimer, list);
-
-		if (expires < x->timer->it.mmtimer.expires)
-			link = &(*link)->rb_left;
-		else
-			link = &(*link)->rb_right;
-	}
-
-	/*
-	 * Insert the timer to the rbtree and check whether it
-	 * replaces the first pending timer
-	 */
-	rb_link_node(&n->list, parent, link);
-	rb_insert_color(&n->list, &timers[nodeid].timer_head);
-
-	if (!timers[nodeid].next || expires < rb_entry(timers[nodeid].next,
-			struct mmtimer, list)->timer->it.mmtimer.expires)
-		timers[nodeid].next = &n->list;
-}
-
-/*
- * Set the comparator for the next timer.
- * This function assumes the struct mmtimer_node is locked.
- */
-static void mmtimer_set_next_timer(int nodeid)
-{
-	struct mmtimer_node *n = &timers[nodeid];
-	struct mmtimer *x;
-	struct k_itimer *t;
-	u64 expires, exp, set_completion_time;
-	int i;
-
-restart:
-	if (n->next == NULL)
-		return;
-
-	x = rb_entry(n->next, struct mmtimer, list);
-	t = x->timer;
-	if (!t->it.mmtimer.incr) {
-		/* Not an interval timer */
-		if (!mmtimer_setup(x->cpu, COMPARATOR,
-					t->it.mmtimer.expires,
-					&set_completion_time)) {
-			/* Late setup, fire now */
-			tasklet_schedule(&n->tasklet);
-		}
-		return;
-	}
-
-	/* Interval timer */
-	i = 0;
-	expires = exp = t->it.mmtimer.expires;
-	while (!mmtimer_setup(x->cpu, COMPARATOR, expires,
-				&set_completion_time)) {
-		int to;
-
-		i++;
-		expires = set_completion_time +
-				mmtimer_interval_retry_increment + (1 << i);
-		/* Calculate overruns as we go. */
-		to = ((u64)(expires - exp) / t->it.mmtimer.incr);
-		if (to) {
-			t->it_overrun += to;
-			t->it.mmtimer.expires += t->it.mmtimer.incr * to;
-			exp = t->it.mmtimer.expires;
-		}
-		if (i > 20) {
-			printk(KERN_ALERT "mmtimer: cannot reschedule timer\n");
-			t->it.mmtimer.clock = TIMER_OFF;
-			n->next = rb_next(&x->list);
-			rb_erase(&x->list, &n->timer_head);
-			kfree(x);
-			goto restart;
-		}
-	}
-}
-
-/**
- * mmtimer_ioctl - ioctl interface for /dev/mmtimer
- * @file: file structure for the device
- * @cmd: command to execute
- * @arg: optional argument to command
- *
- * Executes the command specified by @cmd.  Returns 0 for success, < 0 for
- * failure.
- *
- * Valid commands:
- *
- * %MMTIMER_GETOFFSET - Should return the offset (relative to the start
- * of the page where the registers are mapped) for the counter in question.
- *
- * %MMTIMER_GETRES - Returns the resolution of the clock in femto (10^-15)
- * seconds
- *
- * %MMTIMER_GETFREQ - Copies the frequency of the clock in Hz to the address
- * specified by @arg
- *
- * %MMTIMER_GETBITS - Returns the number of bits in the clock's counter
- *
- * %MMTIMER_MMAPAVAIL - Returns 1 if the registers can be mmap'd into userspace
- *
- * %MMTIMER_GETCOUNTER - Gets the current value in the counter and places it
- * in the address specified by @arg.
- */
-static long mmtimer_ioctl(struct file *file, unsigned int cmd,
-						unsigned long arg)
-{
-	int ret = 0;
-
-	mutex_lock(&mmtimer_mutex);
-
-	switch (cmd) {
-	case MMTIMER_GETOFFSET:	/* offset of the counter */
-		/*
-		 * SN RTC registers are on their own 64k page
-		 */
-		if(PAGE_SIZE <= (1 << 16))
-			ret = (((long)RTC_COUNTER_ADDR) & (PAGE_SIZE-1)) / 8;
-		else
-			ret = -ENOSYS;
-		break;
-
-	case MMTIMER_GETRES: /* resolution of the clock in 10^-15 s */
-		if(copy_to_user((unsigned long __user *)arg,
-				&mmtimer_femtoperiod, sizeof(unsigned long)))
-			ret = -EFAULT;
-		break;
-
-	case MMTIMER_GETFREQ: /* frequency in Hz */
-		if(copy_to_user((unsigned long __user *)arg,
-				&sn_rtc_cycles_per_second,
-				sizeof(unsigned long)))
-			ret = -EFAULT;
-		break;
-
-	case MMTIMER_GETBITS: /* number of bits in the clock */
-		ret = RTC_BITS;
-		break;
-
-	case MMTIMER_MMAPAVAIL: /* can we mmap the clock into userspace? */
-		ret = (PAGE_SIZE <= (1 << 16)) ? 1 : 0;
-		break;
-
-	case MMTIMER_GETCOUNTER:
-		if(copy_to_user((unsigned long __user *)arg,
-				RTC_COUNTER_ADDR, sizeof(unsigned long)))
-			ret = -EFAULT;
-		break;
-	default:
-		ret = -ENOTTY;
-		break;
-	}
-	mutex_unlock(&mmtimer_mutex);
-	return ret;
-}
-
-/**
- * mmtimer_mmap - maps the clock's registers into userspace
- * @file: file structure for the device
- * @vma: VMA to map the registers into
- *
- * Calls remap_pfn_range() to map the clock's registers into
- * the calling process' address space.
- */
-static int mmtimer_mmap(struct file *file, struct vm_area_struct *vma)
-{
-	unsigned long mmtimer_addr;
-
-	if (vma->vm_end - vma->vm_start != PAGE_SIZE)
-		return -EINVAL;
-
-	if (vma->vm_flags & VM_WRITE)
-		return -EPERM;
-
-	if (PAGE_SIZE > (1 << 16))
-		return -ENOSYS;
-
-	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-
-	mmtimer_addr = __pa(RTC_COUNTER_ADDR);
-	mmtimer_addr &= ~(PAGE_SIZE - 1);
-	mmtimer_addr &= 0xfffffffffffffffUL;
-
-	if (remap_pfn_range(vma, vma->vm_start, mmtimer_addr >> PAGE_SHIFT,
-					PAGE_SIZE, vma->vm_page_prot)) {
-		printk(KERN_ERR "remap_pfn_range failed in mmtimer.c\n");
-		return -EAGAIN;
-	}
-
-	return 0;
-}
-
-static struct miscdevice mmtimer_miscdev = {
-	.minor = SGI_MMTIMER,
-	.name = MMTIMER_NAME,
-	.fops = &mmtimer_fops
-};
-
-static struct timespec sgi_clock_offset;
-static int sgi_clock_period;
-
-/*
- * Posix Timer Interface
- */
-
-static struct timespec sgi_clock_offset;
-static int sgi_clock_period;
-
-static int sgi_clock_get(clockid_t clockid, struct timespec64 *tp)
-{
-	u64 nsec;
-
-	nsec = rtc_time() * sgi_clock_period
-			+ sgi_clock_offset.tv_nsec;
-	*tp = ns_to_timespec64(nsec);
-	tp->tv_sec += sgi_clock_offset.tv_sec;
-	return 0;
-};
-
-static int sgi_clock_set(const clockid_t clockid, const struct timespec64 *tp)
-{
-
-	u64 nsec;
-	u32 rem;
-
-	nsec = rtc_time() * sgi_clock_period;
-
-	sgi_clock_offset.tv_sec = tp->tv_sec - div_u64_rem(nsec, NSEC_PER_SEC, &rem);
-
-	if (rem <= tp->tv_nsec)
-		sgi_clock_offset.tv_nsec = tp->tv_sec - rem;
-	else {
-		sgi_clock_offset.tv_nsec = tp->tv_sec + NSEC_PER_SEC - rem;
-		sgi_clock_offset.tv_sec--;
-	}
-	return 0;
-}
-
-/**
- * mmtimer_interrupt - timer interrupt handler
- * @irq: irq received
- * @dev_id: device the irq came from
- *
- * Called when one of the comarators matches the counter, This
- * routine will send signals to processes that have requested
- * them.
- *
- * This interrupt is run in an interrupt context
- * by the SHUB. It is therefore safe to locally access SHub
- * registers.
- */
-static irqreturn_t
-mmtimer_interrupt(int irq, void *dev_id)
-{
-	unsigned long expires = 0;
-	int result = IRQ_NONE;
-	unsigned indx = cpu_to_node(smp_processor_id());
-	struct mmtimer *base;
-
-	spin_lock(&timers[indx].lock);
-	base = rb_entry(timers[indx].next, struct mmtimer, list);
-	if (base == NULL) {
-		spin_unlock(&timers[indx].lock);
-		return result;
-	}
-
-	if (base->cpu == smp_processor_id()) {
-		if (base->timer)
-			expires = base->timer->it.mmtimer.expires;
-		/* expires test won't work with shared irqs */
-		if ((mmtimer_int_pending(COMPARATOR) > 0) ||
-			(expires && (expires <= rtc_time()))) {
-			mmtimer_clr_int_pending(COMPARATOR);
-			tasklet_schedule(&timers[indx].tasklet);
-			result = IRQ_HANDLED;
-		}
-	}
-	spin_unlock(&timers[indx].lock);
-	return result;
-}
-
-static void mmtimer_tasklet(unsigned long data)
-{
-	int nodeid = data;
-	struct mmtimer_node *mn = &timers[nodeid];
-	struct mmtimer *x;
-	struct k_itimer *t;
-	unsigned long flags;
-
-	/* Send signal and deal with periodic signals */
-	spin_lock_irqsave(&mn->lock, flags);
-	if (!mn->next)
-		goto out;
-
-	x = rb_entry(mn->next, struct mmtimer, list);
-	t = x->timer;
-
-	if (t->it.mmtimer.clock == TIMER_OFF)
-		goto out;
-
-	t->it_overrun = 0;
-
-	mn->next = rb_next(&x->list);
-	rb_erase(&x->list, &mn->timer_head);
-
-	if (posix_timer_event(t, 0) != 0)
-		t->it_overrun++;
-
-	if(t->it.mmtimer.incr) {
-		t->it.mmtimer.expires += t->it.mmtimer.incr;
-		mmtimer_add_list(x);
-	} else {
-		/* Ensure we don't false trigger in mmtimer_interrupt */
-		t->it.mmtimer.clock = TIMER_OFF;
-		t->it.mmtimer.expires = 0;
-		kfree(x);
-	}
-	/* Set comparator for next timer, if there is one */
-	mmtimer_set_next_timer(nodeid);
-
-	t->it_overrun_last = t->it_overrun;
-out:
-	spin_unlock_irqrestore(&mn->lock, flags);
-}
-
-static int sgi_timer_create(struct k_itimer *timer)
-{
-	/* Insure that a newly created timer is off */
-	timer->it.mmtimer.clock = TIMER_OFF;
-	return 0;
-}
-
-/* This does not really delete a timer. It just insures
- * that the timer is not active
- *
- * Assumption: it_lock is already held with irq's disabled
- */
-static int sgi_timer_del(struct k_itimer *timr)
-{
-	cnodeid_t nodeid = timr->it.mmtimer.node;
-	unsigned long irqflags;
-
-	spin_lock_irqsave(&timers[nodeid].lock, irqflags);
-	if (timr->it.mmtimer.clock != TIMER_OFF) {
-		unsigned long expires = timr->it.mmtimer.expires;
-		struct rb_node *n = timers[nodeid].timer_head.rb_node;
-		struct mmtimer *uninitialized_var(t);
-		int r = 0;
-
-		timr->it.mmtimer.clock = TIMER_OFF;
-		timr->it.mmtimer.expires = 0;
-
-		while (n) {
-			t = rb_entry(n, struct mmtimer, list);
-			if (t->timer == timr)
-				break;
-
-			if (expires < t->timer->it.mmtimer.expires)
-				n = n->rb_left;
-			else
-				n = n->rb_right;
-		}
-
-		if (!n) {
-			spin_unlock_irqrestore(&timers[nodeid].lock, irqflags);
-			return 0;
-		}
-
-		if (timers[nodeid].next == n) {
-			timers[nodeid].next = rb_next(n);
-			r = 1;
-		}
-
-		rb_erase(n, &timers[nodeid].timer_head);
-		kfree(t);
-
-		if (r) {
-			mmtimer_disable_int(cnodeid_to_nasid(nodeid),
-				COMPARATOR);
-			mmtimer_set_next_timer(nodeid);
-		}
-	}
-	spin_unlock_irqrestore(&timers[nodeid].lock, irqflags);
-	return 0;
-}
-
-/* Assumption: it_lock is already held with irq's disabled */
-static void sgi_timer_get(struct k_itimer *timr, struct itimerspec64 *cur_setting)
-{
-
-	if (timr->it.mmtimer.clock == TIMER_OFF) {
-		cur_setting->it_interval.tv_nsec = 0;
-		cur_setting->it_interval.tv_sec = 0;
-		cur_setting->it_value.tv_nsec = 0;
-		cur_setting->it_value.tv_sec =0;
-		return;
-	}
-
-	cur_setting->it_interval = ns_to_timespec64(timr->it.mmtimer.incr * sgi_clock_period);
-	cur_setting->it_value = ns_to_timespec64((timr->it.mmtimer.expires - rtc_time()) * sgi_clock_period);
-}
-
-
-static int sgi_timer_set(struct k_itimer *timr, int flags,
-	struct itimerspec64 *new_setting,
-	struct itimerspec64 *old_setting)
-{
-	unsigned long when, period, irqflags;
-	int err = 0;
-	cnodeid_t nodeid;
-	struct mmtimer *base;
-	struct rb_node *n;
-
-	if (old_setting)
-		sgi_timer_get(timr, old_setting);
-
-	sgi_timer_del(timr);
-	when = timespec64_to_ns(&new_setting->it_value);
-	period = timespec64_to_ns(&new_setting->it_interval);
-
-	if (when == 0)
-		/* Clear timer */
-		return 0;
-
-	base = kmalloc(sizeof(struct mmtimer), GFP_KERNEL);
-	if (base == NULL)
-		return -ENOMEM;
-
-	if (flags & TIMER_ABSTIME) {
-		struct timespec64 n;
-		unsigned long now;
-
-		getnstimeofday64(&n);
-		now = timespec64_to_ns(&n);
-		if (when > now)
-			when -= now;
-		else
-			/* Fire the timer immediately */
-			when = 0;
-	}
-
-	/*
-	 * Convert to sgi clock period. Need to keep rtc_time() as near as possible
-	 * to getnstimeofday() in order to be as faithful as possible to the time
-	 * specified.
-	 */
-	when = (when + sgi_clock_period - 1) / sgi_clock_period + rtc_time();
-	period = (period + sgi_clock_period - 1)  / sgi_clock_period;
-
-	/*
-	 * We are allocating a local SHub comparator. If we would be moved to another
-	 * cpu then another SHub may be local to us. Prohibit that by switching off
-	 * preemption.
-	 */
-	preempt_disable();
-
-	nodeid =  cpu_to_node(smp_processor_id());
-
-	/* Lock the node timer structure */
-	spin_lock_irqsave(&timers[nodeid].lock, irqflags);
-
-	base->timer = timr;
-	base->cpu = smp_processor_id();
-
-	timr->it.mmtimer.clock = TIMER_SET;
-	timr->it.mmtimer.node = nodeid;
-	timr->it.mmtimer.incr = period;
-	timr->it.mmtimer.expires = when;
-
-	n = timers[nodeid].next;
-
-	/* Add the new struct mmtimer to node's timer list */
-	mmtimer_add_list(base);
-
-	if (timers[nodeid].next == n) {
-		/* No need to reprogram comparator for now */
-		spin_unlock_irqrestore(&timers[nodeid].lock, irqflags);
-		preempt_enable();
-		return err;
-	}
-
-	/* We need to reprogram the comparator */
-	if (n)
-		mmtimer_disable_int(cnodeid_to_nasid(nodeid), COMPARATOR);
-
-	mmtimer_set_next_timer(nodeid);
-
-	/* Unlock the node timer structure */
-	spin_unlock_irqrestore(&timers[nodeid].lock, irqflags);
-
-	preempt_enable();
-
-	return err;
-}
-
-static int sgi_clock_getres(const clockid_t which_clock, struct timespec64 *tp)
-{
-	tp->tv_sec = 0;
-	tp->tv_nsec = sgi_clock_period;
-	return 0;
-}
-
-static struct k_clock sgi_clock = {
-	.clock_set	= sgi_clock_set,
-	.clock_get	= sgi_clock_get,
-	.clock_getres	= sgi_clock_getres,
-	.timer_create	= sgi_timer_create,
-	.timer_set	= sgi_timer_set,
-	.timer_del	= sgi_timer_del,
-	.timer_get	= sgi_timer_get
-};
-
-/**
- * mmtimer_init - device initialization routine
- *
- * Does initial setup for the mmtimer device.
- */
-static int __init mmtimer_init(void)
-{
-	cnodeid_t node, maxn = -1;
-
-	if (!ia64_platform_is("sn2"))
-		return 0;
-
-	/*
-	 * Sanity check the cycles/sec variable
-	 */
-	if (sn_rtc_cycles_per_second < 100000) {
-		printk(KERN_ERR "%s: unable to determine clock frequency\n",
-		       MMTIMER_NAME);
-		goto out1;
-	}
-
-	mmtimer_femtoperiod = ((unsigned long)1E15 + sn_rtc_cycles_per_second /
-			       2) / sn_rtc_cycles_per_second;
-
-	if (request_irq(SGI_MMTIMER_VECTOR, mmtimer_interrupt, IRQF_PERCPU, MMTIMER_NAME, NULL)) {
-		printk(KERN_WARNING "%s: unable to allocate interrupt.",
-			MMTIMER_NAME);
-		goto out1;
-	}
-
-	if (misc_register(&mmtimer_miscdev)) {
-		printk(KERN_ERR "%s: failed to register device\n",
-		       MMTIMER_NAME);
-		goto out2;
-	}
-
-	/* Get max numbered node, calculate slots needed */
-	for_each_online_node(node) {
-		maxn = node;
-	}
-	maxn++;
-
-	/* Allocate list of node ptrs to mmtimer_t's */
-	timers = kzalloc(sizeof(struct mmtimer_node)*maxn, GFP_KERNEL);
-	if (!timers) {
-		printk(KERN_ERR "%s: failed to allocate memory for device\n",
-				MMTIMER_NAME);
-		goto out3;
-	}
-
-	/* Initialize struct mmtimer's for each online node */
-	for_each_online_node(node) {
-		spin_lock_init(&timers[node].lock);
-		tasklet_init(&timers[node].tasklet, mmtimer_tasklet,
-			(unsigned long) node);
-	}
-
-	sgi_clock_period = NSEC_PER_SEC / sn_rtc_cycles_per_second;
-	posix_timers_register_clock(CLOCK_SGI_CYCLE, &sgi_clock);
-
-	printk(KERN_INFO "%s: v%s, %ld MHz\n", MMTIMER_DESC, MMTIMER_VERSION,
-	       sn_rtc_cycles_per_second/(unsigned long)1E6);
-
-	return 0;
-
-out3:
-	misc_deregister(&mmtimer_miscdev);
-out2:
-	free_irq(SGI_MMTIMER_VECTOR, NULL);
-out1:
-	return -1;
-}
-
-module_init(mmtimer_init);

drivers/clocksource/Kconfig

@@ -1,22 +1,16 @@
 menu "Clock Source drivers"
 	depends on !ARCH_USES_GETTIMEOFFSET
 
-config CLKSRC_OF
+config TIMER_OF
 	bool
-	select CLKSRC_PROBE
-
-config CLKEVT_OF
-	bool
-	select CLKEVT_PROBE
-
-config CLKSRC_ACPI
-	bool
-	select CLKSRC_PROBE
+	depends on GENERIC_CLOCKEVENTS
+	select TIMER_PROBE
 
-config CLKSRC_PROBE
+config TIMER_ACPI
 	bool
+	select TIMER_PROBE
 
-config CLKEVT_PROBE
+config TIMER_PROBE
 	bool
 
 config CLKSRC_I8253
@@ -65,14 +59,14 @@ config DW_APB_TIMER
 config DW_APB_TIMER_OF
 	bool
 	select DW_APB_TIMER
-	select CLKSRC_OF
+	select TIMER_OF
 
 config FTTMR010_TIMER
 	bool "Faraday Technology timer driver" if COMPILE_TEST
 	depends on GENERIC_CLOCKEVENTS
 	depends on HAS_IOMEM
 	select CLKSRC_MMIO
-	select CLKSRC_OF
+	select TIMER_OF
 	select MFD_SYSCON
 	help
 	  Enables support for the Faraday Technology timer block
@@ -81,7 +75,7 @@ config FTTMR010_TIMER
 config ROCKCHIP_TIMER
 	bool "Rockchip timer driver" if COMPILE_TEST
 	depends on ARM || ARM64
-	select CLKSRC_OF
+	select TIMER_OF
 	select CLKSRC_MMIO
 	help
 	  Enables the support for the rockchip timer driver.
@@ -89,7 +83,7 @@ config ROCKCHIP_TIMER
 config ARMADA_370_XP_TIMER
 	bool "Armada 370 and XP timer driver" if COMPILE_TEST
 	depends on ARM
-	select CLKSRC_OF
+	select TIMER_OF
 	select CLKSRC_MMIO
 	help
 	  Enables the support for the Armada 370 and XP timer driver.
@@ -104,7 +98,7 @@ config MESON6_TIMER
 config ORION_TIMER
 	bool "Orion timer driver" if COMPILE_TEST
 	depends on ARM
-	select CLKSRC_OF
+	select TIMER_OF
 	select CLKSRC_MMIO
 	help
 	  Enables the support for the Orion timer driver
@@ -114,6 +108,7 @@ config SUN4I_TIMER
 	depends on GENERIC_CLOCKEVENTS
 	depends on HAS_IOMEM
 	select CLKSRC_MMIO
+	select TIMER_OF
 	help
 	  Enables support for the Sun4i timer.
 
@@ -148,7 +143,7 @@ config ASM9260_TIMER
 	bool "ASM9260 timer driver" if COMPILE_TEST
 	depends on GENERIC_CLOCKEVENTS
 	select CLKSRC_MMIO
-	select CLKSRC_OF
+	select TIMER_OF
 	help
 	  Enables support for the ASM9260 timer.
 
@@ -188,13 +183,6 @@ config ATLAS7_TIMER
 	help
 	  Enables support for the Atlas7 timer.
 
-config MOXART_TIMER
-	bool "Moxart timer driver" if COMPILE_TEST
-	depends on GENERIC_CLOCKEVENTS
-	select CLKSRC_MMIO
-	help
-	  Enables support for the Moxart timer.
-
 config MXS_TIMER
 	bool "Mxs timer driver" if COMPILE_TEST
 	depends on GENERIC_CLOCKEVENTS
@@ -261,21 +249,21 @@ config CLKSRC_LPC32XX
 	depends on GENERIC_CLOCKEVENTS && HAS_IOMEM
 	depends on ARM
 	select CLKSRC_MMIO
-	select CLKSRC_OF
+	select TIMER_OF
 	help
 	  Support for the LPC32XX clocksource.
 
 config CLKSRC_PISTACHIO
 	bool "Clocksource for Pistachio SoC" if COMPILE_TEST
 	depends on HAS_IOMEM
-	select CLKSRC_OF
+	select TIMER_OF
 	help
 	  Enables the clocksource for the Pistachio SoC.
 
 config CLKSRC_TI_32K
 	bool "Texas Instruments 32.768 Hz Clocksource" if COMPILE_TEST
 	depends on GENERIC_SCHED_CLOCK
-	select CLKSRC_OF if OF
+	select TIMER_OF if OF
 	help
 	  This option enables support for Texas Instruments 32.768 Hz clocksource
 	  available on many OMAP-like platforms.
@@ -284,7 +272,7 @@ config CLKSRC_NPS
 	bool "NPS400 clocksource driver" if COMPILE_TEST
 	depends on !PHYS_ADDR_T_64BIT
 	select CLKSRC_MMIO
-	select CLKSRC_OF if OF
+	select TIMER_OF if OF
 	help
 	  NPS400 clocksource support.
 	  Got 64 bit counter with update rate up to 1000MHz.
@@ -299,12 +287,12 @@ config CLKSRC_MPS2
 	bool "Clocksource for MPS2 SoCs" if COMPILE_TEST
 	depends on GENERIC_SCHED_CLOCK
 	select CLKSRC_MMIO
-	select CLKSRC_OF
+	select TIMER_OF
 
 config ARC_TIMERS
 	bool "Support for 32-bit TIMERn counters in ARC Cores" if COMPILE_TEST
 	depends on GENERIC_CLOCKEVENTS
-	select CLKSRC_OF
+	select TIMER_OF
 	help
 	  These are legacy 32-bit TIMER0 and TIMER1 counters found on all ARC cores
 	  (ARC700 as well as ARC HS38).
@@ -314,7 +302,7 @@ config ARC_TIMERS_64BIT
 	bool "Support for 64-bit counters in ARC HS38 cores" if COMPILE_TEST
 	depends on GENERIC_CLOCKEVENTS
 	depends on ARC_TIMERS
-	select CLKSRC_OF
+	select TIMER_OF
 	help
 	  This enables 2 different 64-bit timers: RTC (for UP) and GFRC (for SMP)
 	  RTC is implemented inside the core, while GFRC sits outside the core in
@@ -323,8 +311,8 @@ config ARC_TIMERS_64BIT
 
 config ARM_ARCH_TIMER
 	bool
-	select CLKSRC_OF if OF
-	select CLKSRC_ACPI if ACPI
+	select TIMER_OF if OF
+	select TIMER_ACPI if ACPI
 
 config ARM_ARCH_TIMER_EVTSTREAM
 	bool "Enable ARM architected timer event stream generation by default"
@@ -381,7 +369,7 @@ config ARM64_ERRATUM_858921
 
 config ARM_GLOBAL_TIMER
 	bool "Support for the ARM global timer" if COMPILE_TEST
-	select CLKSRC_OF if OF
+	select TIMER_OF if OF
 	depends on ARM
 	help
 	  This options enables support for the ARM global timer unit
@@ -390,7 +378,7 @@ config ARM_TIMER_SP804
 	bool "Support for Dual Timer SP804 module"
 	depends on GENERIC_SCHED_CLOCK && CLKDEV_LOOKUP
 	select CLKSRC_MMIO
-	select CLKSRC_OF if OF
+	select TIMER_OF if OF
 
 config CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
 	bool
@@ -401,19 +389,19 @@ config CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
 
 config ARMV7M_SYSTICK
 	bool "Support for the ARMv7M system time" if COMPILE_TEST
-	select CLKSRC_OF if OF
+	select TIMER_OF if OF
 	select CLKSRC_MMIO
 	help
 	  This options enables support for the ARMv7M system timer unit
 
 config ATMEL_PIT
-	select CLKSRC_OF if OF
+	select TIMER_OF if OF
 	def_bool SOC_AT91SAM9 || SOC_SAMA5
 
 config ATMEL_ST
 	bool "Atmel ST timer support" if COMPILE_TEST
 	depends on GENERIC_CLOCKEVENTS
-	select CLKSRC_OF
+	select TIMER_OF
 	select MFD_SYSCON
 	help
 	  Support for the Atmel ST timer.
@@ -456,7 +444,7 @@ config VF_PIT_TIMER
 config OXNAS_RPS_TIMER
 	bool "Oxford Semiconductor OXNAS RPS Timers driver" if COMPILE_TEST
 	depends on GENERIC_CLOCKEVENTS
-	select CLKSRC_OF
+	select TIMER_OF
 	select CLKSRC_MMIO
 	help
 	  This enables support for the Oxford Semiconductor OXNAS RPS timers.
@@ -467,7 +455,7 @@ config SYS_SUPPORTS_SH_CMT
 config MTK_TIMER
 	bool "Mediatek timer driver" if COMPILE_TEST
 	depends on GENERIC_CLOCKEVENTS && HAS_IOMEM
-	select CLKSRC_OF
+	select TIMER_OF
 	select CLKSRC_MMIO
 	help
 	  Support for Mediatek timer driver.
@@ -540,7 +528,7 @@ config EM_TIMER_STI
 config CLKSRC_QCOM
 	bool "Qualcomm MSM timer" if COMPILE_TEST
 	depends on ARM
-	select CLKSRC_OF
+	select TIMER_OF
 	help
 	  This enables the clocksource and the per CPU clockevent driver for the
 	  Qualcomm SoCs.
@@ -548,7 +536,7 @@ config CLKSRC_QCOM
 config CLKSRC_VERSATILE
 	bool "ARM Versatile (Express) reference platforms clock source" if COMPILE_TEST
 	depends on GENERIC_SCHED_CLOCK && !ARCH_USES_GETTIMEOFFSET
-	select CLKSRC_OF
+	select TIMER_OF
 	default y if MFD_VEXPRESS_SYSREG
 	help
 	  This option enables clock source based on free running
@@ -559,12 +547,12 @@ config CLKSRC_VERSATILE
 config CLKSRC_MIPS_GIC
 	bool
 	depends on MIPS_GIC
-	select CLKSRC_OF
+	select TIMER_OF
 
 config CLKSRC_TANGO_XTAL
 	bool "Clocksource for Tango SoC" if COMPILE_TEST
 	depends on ARM
-	select CLKSRC_OF
+	select TIMER_OF
 	select CLKSRC_MMIO
 	help
 	  This enables the clocksource for Tango SoC
@@ -605,7 +593,7 @@ config CLKSRC_IMX_GPT
 
 config CLKSRC_ST_LPC
 	bool "Low power clocksource found in the LPC" if COMPILE_TEST
-	select CLKSRC_OF if OF
+	select TIMER_OF if OF
 	depends on HAS_IOMEM
 	select CLKSRC_MMIO
 	help

drivers/clocksource/Makefile

@@ -1,5 +1,5 @@
-obj-$(CONFIG_CLKSRC_PROBE)	+= clksrc-probe.o
-obj-$(CONFIG_CLKEVT_PROBE)	+= clkevt-probe.o
+obj-$(CONFIG_TIMER_OF)		+= timer-of.o
+obj-$(CONFIG_TIMER_PROBE)	+= timer-probe.o
 obj-$(CONFIG_ATMEL_PIT)		+= timer-atmel-pit.o
 obj-$(CONFIG_ATMEL_ST)		+= timer-atmel-st.o
 obj-$(CONFIG_ATMEL_TCB_CLKSRC)	+= tcb_clksrc.o
@@ -26,7 +26,6 @@ obj-$(CONFIG_ORION_TIMER)	+= time-orion.o
 obj-$(CONFIG_BCM2835_TIMER)	+= bcm2835_timer.o
 obj-$(CONFIG_CLPS711X_TIMER)	+= clps711x-timer.o
 obj-$(CONFIG_ATLAS7_TIMER)	+= timer-atlas7.o
-obj-$(CONFIG_MOXART_TIMER)	+= moxart_timer.o
 obj-$(CONFIG_MXS_TIMER)		+= mxs_timer.o
 obj-$(CONFIG_CLKSRC_PXA)	+= pxa_timer.o
 obj-$(CONFIG_PRIMA2_TIMER)	+= timer-prima2.o

drivers/clocksource/arc_timer.c

@@ -99,7 +99,7 @@ static int __init arc_cs_setup_gfrc(struct device_node *node)
 
 	return clocksource_register_hz(&arc_counter_gfrc, arc_timer_freq);
 }
-CLOCKSOURCE_OF_DECLARE(arc_gfrc, "snps,archs-timer-gfrc", arc_cs_setup_gfrc);
+TIMER_OF_DECLARE(arc_gfrc, "snps,archs-timer-gfrc", arc_cs_setup_gfrc);
 
 #define AUX_RTC_CTRL	0x103
 #define AUX_RTC_LOW	0x104
@@ -158,7 +158,7 @@ static int __init arc_cs_setup_rtc(struct device_node *node)
 
 	return clocksource_register_hz(&arc_counter_rtc, arc_timer_freq);
 }
-CLOCKSOURCE_OF_DECLARE(arc_rtc, "snps,archs-timer-rtc", arc_cs_setup_rtc);
+TIMER_OF_DECLARE(arc_rtc, "snps,archs-timer-rtc", arc_cs_setup_rtc);
 
 #endif
 
@@ -333,4 +333,4 @@ static int __init arc_of_timer_init(struct device_node *np)
 
 	return ret;
 }
-CLOCKSOURCE_OF_DECLARE(arc_clkevt, "snps,arc-timer", arc_of_timer_init);
+TIMER_OF_DECLARE(arc_clkevt, "snps,arc-timer", arc_of_timer_init);

drivers/clocksource/arm_arch_timer.c

@@ -1194,8 +1194,8 @@ static int __init arch_timer_of_init(struct device_node *np)
 
 	return arch_timer_common_init();
 }
-CLOCKSOURCE_OF_DECLARE(armv7_arch_timer, "arm,armv7-timer", arch_timer_of_init);
-CLOCKSOURCE_OF_DECLARE(armv8_arch_timer, "arm,armv8-timer", arch_timer_of_init);
+TIMER_OF_DECLARE(armv7_arch_timer, "arm,armv7-timer", arch_timer_of_init);
+TIMER_OF_DECLARE(armv8_arch_timer, "arm,armv8-timer", arch_timer_of_init);
 
 static u32 __init
 arch_timer_mem_frame_get_cntfrq(struct arch_timer_mem_frame *frame)
@@ -1382,7 +1382,7 @@ out:
 	kfree(timer_mem);
 	return ret;
 }
-CLOCKSOURCE_OF_DECLARE(armv7_arch_timer_mem, "arm,armv7-timer-mem",
+TIMER_OF_DECLARE(armv7_arch_timer_mem, "arm,armv7-timer-mem",
 		       arch_timer_mem_of_init);
 
 #ifdef CONFIG_ACPI_GTDT
@@ -1516,5 +1516,5 @@ static int __init arch_timer_acpi_init(struct acpi_table_header *table)
 
 	return arch_timer_common_init();
 }
-CLOCKSOURCE_ACPI_DECLARE(arch_timer, ACPI_SIG_GTDT, arch_timer_acpi_init);
+TIMER_ACPI_DECLARE(arch_timer, ACPI_SIG_GTDT, arch_timer_acpi_init);
 #endif

drivers/clocksource/arm_global_timer.c

@@ -339,5 +339,5 @@ out_unmap:
 }
 
 /* Only tested on r2p2 and r3p0  */
-CLOCKSOURCE_OF_DECLARE(arm_gt, "arm,cortex-a9-global-timer",
+TIMER_OF_DECLARE(arm_gt, "arm,cortex-a9-global-timer",
 			global_timer_of_register);

drivers/clocksource/armv7m_systick.c

@@ -82,5 +82,5 @@ out_unmap:
 	return ret;
 }
 
-CLOCKSOURCE_OF_DECLARE(arm_systick, "arm,armv7m-systick",
+TIMER_OF_DECLARE(arm_systick, "arm,armv7m-systick",
 			system_timer_of_register);

drivers/clocksource/asm9260_timer.c

@@ -238,5 +238,5 @@ static int __init asm9260_timer_init(struct device_node *np)
 
 	return 0;
 }
-CLOCKSOURCE_OF_DECLARE(asm9260_timer, "alphascale,asm9260-timer",
+TIMER_OF_DECLARE(asm9260_timer, "alphascale,asm9260-timer",
 		asm9260_timer_init);

drivers/clocksource/bcm2835_timer.c

@@ -148,5 +148,5 @@ err_iounmap:
 	iounmap(base);
 	return ret;
 }
-CLOCKSOURCE_OF_DECLARE(bcm2835, "brcm,bcm2835-system-timer",
+TIMER_OF_DECLARE(bcm2835, "brcm,bcm2835-system-timer",
 			bcm2835_timer_init);

drivers/clocksource/bcm_kona_timer.c

@@ -198,9 +198,9 @@ static int __init kona_timer_init(struct device_node *node)
 	return 0;
 }
 
-CLOCKSOURCE_OF_DECLARE(brcm_kona, "brcm,kona-timer", kona_timer_init);
+TIMER_OF_DECLARE(brcm_kona, "brcm,kona-timer", kona_timer_init);
 /*
  * bcm,kona-timer is deprecated by brcm,kona-timer
  * being kept here for driver compatibility
  */
-CLOCKSOURCE_OF_DECLARE(bcm_kona, "bcm,kona-timer", kona_timer_init);
+TIMER_OF_DECLARE(bcm_kona, "bcm,kona-timer", kona_timer_init);

drivers/clocksource/cadence_ttc_timer.c

@@ -540,4 +540,4 @@ static int __init ttc_timer_init(struct device_node *timer)
 	return 0;
 }
 
-CLOCKSOURCE_OF_DECLARE(ttc, "cdns,ttc", ttc_timer_init);
+TIMER_OF_DECLARE(ttc, "cdns,ttc", ttc_timer_init);

drivers/clocksource/clkevt-probe.c

@@ -1,56 +0,0 @@
-/*
- * Copyright (c) 2016, Linaro Ltd.  All rights reserved.
- * Daniel Lezcano <daniel.lezcano@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/init.h>
-#include <linux/of.h>
-#include <linux/clockchips.h>
-
-extern struct of_device_id __clkevt_of_table[];
-
-static const struct of_device_id __clkevt_of_table_sentinel
-	__used __section(__clkevt_of_table_end);
-
-int __init clockevent_probe(void)
-{
-	struct device_node *np;
-	const struct of_device_id *match;
-	of_init_fn_1_ret init_func;
-	int ret, clockevents = 0;
-
-	for_each_matching_node_and_match(np, __clkevt_of_table, &match) {
-		if (!of_device_is_available(np))
-			continue;
-
-		init_func = match->data;
-
-		ret = init_func(np);
-		if (ret) {
-			pr_warn("Failed to initialize '%s' (%d)\n",
-				np->name, ret);
-			continue;
-		}
-
-		clockevents++;
-	}
-
-	if (!clockevents) {
-		pr_crit("%s: no matching clockevent found\n", __func__);
-		return -ENODEV;
-	}
-
-	return 0;
-}

drivers/clocksource/clksrc-dbx500-prcmu.c

@@ -86,5 +86,5 @@ static int __init clksrc_dbx500_prcmu_init(struct device_node *node)
 #endif
 	return clocksource_register_hz(&clocksource_dbx500_prcmu, RATE_32K);
 }
-CLOCKSOURCE_OF_DECLARE(dbx500_prcmu, "stericsson,db8500-prcmu-timer-4",
+TIMER_OF_DECLARE(dbx500_prcmu, "stericsson,db8500-prcmu-timer-4",
 		       clksrc_dbx500_prcmu_init);

drivers/clocksource/clksrc_st_lpc.c

@@ -132,4 +132,4 @@ static int __init st_clksrc_of_register(struct device_node *np)
 
 	return ret;
 }
-CLOCKSOURCE_OF_DECLARE(ddata, "st,stih407-lpc", st_clksrc_of_register);
+TIMER_OF_DECLARE(ddata, "st,stih407-lpc", st_clksrc_of_register);

drivers/clocksource/clps711x-timer.c

@@ -103,7 +103,7 @@ void __init clps711x_clksrc_init(void __iomem *tc1_base, void __iomem *tc2_base,
 	BUG_ON(_clps711x_clkevt_init(tc2, tc2_base, irq));
 }
 
-#ifdef CONFIG_CLKSRC_OF
+#ifdef CONFIG_TIMER_OF
 static int __init clps711x_timer_init(struct device_node *np)
 {
 	unsigned int irq = irq_of_parse_and_map(np, 0);
@@ -119,5 +119,5 @@ static int __init clps711x_timer_init(struct device_node *np)
 		return -EINVAL;
 	}
 }
-CLOCKSOURCE_OF_DECLARE(clps711x, "cirrus,ep7209-timer", clps711x_timer_init);
+TIMER_OF_DECLARE(clps711x, "cirrus,ep7209-timer", clps711x_timer_init);
 #endif

drivers/clocksource/dw_apb_timer_of.c

@@ -167,7 +167,7 @@ static int __init dw_apb_timer_init(struct device_node *timer)
 
 	return 0;
 }
-CLOCKSOURCE_OF_DECLARE(pc3x2_timer, "picochip,pc3x2-timer", dw_apb_timer_init);
-CLOCKSOURCE_OF_DECLARE(apb_timer_osc, "snps,dw-apb-timer-osc", dw_apb_timer_init);
-CLOCKSOURCE_OF_DECLARE(apb_timer_sp, "snps,dw-apb-timer-sp", dw_apb_timer_init);
-CLOCKSOURCE_OF_DECLARE(apb_timer, "snps,dw-apb-timer", dw_apb_timer_init);
+TIMER_OF_DECLARE(pc3x2_timer, "picochip,pc3x2-timer", dw_apb_timer_init);
+TIMER_OF_DECLARE(apb_timer_osc, "snps,dw-apb-timer-osc", dw_apb_timer_init);
+TIMER_OF_DECLARE(apb_timer_sp, "snps,dw-apb-timer-sp", dw_apb_timer_init);
+TIMER_OF_DECLARE(apb_timer, "snps,dw-apb-timer", dw_apb_timer_init);

drivers/clocksource/exynos_mct.c

@@ -610,5 +610,5 @@ static int __init mct_init_ppi(struct device_node *np)
 {
 	return mct_init_dt(np, MCT_INT_PPI);
 }
-CLOCKSOURCE_OF_DECLARE(exynos4210, "samsung,exynos4210-mct", mct_init_spi);
-CLOCKSOURCE_OF_DECLARE(exynos4412, "samsung,exynos4412-mct", mct_init_ppi);
+TIMER_OF_DECLARE(exynos4210, "samsung,exynos4210-mct", mct_init_spi);
+TIMER_OF_DECLARE(exynos4412, "samsung,exynos4412-mct", mct_init_ppi);

drivers/clocksource/fsl_ftm_timer.c

@@ -329,13 +329,13 @@ static int __init ftm_timer_init(struct device_node *np)
 	priv->clkevt_base = of_iomap(np, 0);
 	if (!priv->clkevt_base) {
 		pr_err("ftm: unable to map event timer registers\n");
-		goto err;
+		goto err_clkevt;
 	}
 
 	priv->clksrc_base = of_iomap(np, 1);
 	if (!priv->clksrc_base) {
 		pr_err("ftm: unable to map source timer registers\n");
-		goto err;
+		goto err_clksrc;
 	}
 
 	ret = -EINVAL;
@@ -366,7 +366,11 @@ static int __init ftm_timer_init(struct device_node *np)
 	return 0;
 
 err:
+	iounmap(priv->clksrc_base);
+err_clksrc:
+	iounmap(priv->clkevt_base);
+err_clkevt:
 	kfree(priv);
 	return ret;
 }
-CLOCKSOURCE_OF_DECLARE(flextimer, "fsl,ftm-timer", ftm_timer_init);
+TIMER_OF_DECLARE(flextimer, "fsl,ftm-timer", ftm_timer_init);

drivers/clocksource/h8300_timer16.c

@@ -187,5 +187,5 @@ free_clk:
 	return ret;
 }
 
-CLOCKSOURCE_OF_DECLARE(h8300_16bit, "renesas,16bit-timer",
+TIMER_OF_DECLARE(h8300_16bit, "renesas,16bit-timer",
 			   h8300_16timer_init);

drivers/clocksource/h8300_timer8.c

@@ -207,4 +207,4 @@ free_clk:
 	return ret;
 }
 
-CLOCKSOURCE_OF_DECLARE(h8300_8bit, "renesas,8bit-timer", h8300_8timer_init);
+TIMER_OF_DECLARE(h8300_8bit, "renesas,8bit-timer", h8300_8timer_init);