Staging: drivers: Bool initializations should use true/false

This patch replaces bool initializations of 1/0 with true/false in order
to increase readability and respect the standards. Warning found by
coccinelle.

Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/ft1000/ft1000-usb/ft1000_debug.c

@@ -544,7 +544,7 @@ static long ft1000_ioctl(struct file *file, unsigned int command,
 		if (ft1000dev->fProvComplete == 0)
 			return -EACCES;
 
-		ft1000dev->fAppMsgPend = 1;
+		ft1000dev->fAppMsgPend = true;
 
 		if (info->CardReady) {
 
@@ -719,7 +719,7 @@ static long ft1000_ioctl(struct file *file, unsigned int command,
 		result = -ENOTTY;
 		break;
 	}
-	ft1000dev->fAppMsgPend = 0;
+	ft1000dev->fAppMsgPend = false;
 	return result;
 }
 

drivers/staging/lustre/lustre/llite/llite_mmap.c

@@ -312,7 +312,7 @@ static int ll_fault0(struct vm_area_struct *vma, struct vm_fault *vmf)
 		vio->u.fault.ft_vmpage    = NULL;
 		vio->u.fault.fault.ft_vmf = vmf;
 		vio->u.fault.fault.ft_flags = 0;
-		vio->u.fault.fault.ft_flags_valid = 0;
+		vio->u.fault.fault.ft_flags_valid = false;
 
 		result = cl_io_loop(env, io);
 

drivers/staging/rtl8192u/ieee80211/dot11d.c

@@ -6,7 +6,7 @@ void Dot11d_Init(struct ieee80211_device *ieee)
 {
 	PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(ieee);
 
-	pDot11dInfo->bEnabled = 0;
+	pDot11dInfo->bEnabled = false;
 
 	pDot11dInfo->State = DOT11D_STATE_NONE;
 	pDot11dInfo->CountryIeLen = 0;

drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c

@@ -943,7 +943,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
 		if(net_ratelimit())
 		printk("find HTCControl\n");
 		hdrlen += 4;
-		rx_stats->bContainHTC = 1;
+		rx_stats->bContainHTC = true;
 	}
 
 	//IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA, skb->data, skb->len);

drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c

@@ -1371,7 +1371,7 @@ static void ieee80211_associate_complete_wq(struct work_struct *work)
 	else if(ieee->is_silent_reset == 1)
 	{
 		printk("==================>silent reset associate\n");
-		ieee->is_silent_reset = 0;
+		ieee->is_silent_reset = false;
 	}
 
 	if (ieee->data_hard_resume)
@@ -2719,7 +2719,7 @@ void ieee80211_softmac_init(struct ieee80211_device *ieee)
 	ieee->sta_edca_param[2] = 0x005E4342;
 	ieee->sta_edca_param[3] = 0x002F3262;
 	ieee->aggregation = true;
-	ieee->enable_rx_imm_BA = 1;
+	ieee->enable_rx_imm_BA = true;
 	ieee->tx_pending.txb = NULL;
 
 	setup_timer(&ieee->associate_timer, ieee80211_associate_abort_cb,

drivers/staging/rtl8192u/r8192U_core.c

@@ -2143,7 +2143,7 @@ static void rtl8192_init_priv_variable(struct net_device *dev)
 	//for silent reset
 	priv->IrpPendingCount = 1;
 	priv->ResetProgress = RESET_TYPE_NORESET;
-	priv->bForcedSilentReset = 0;
+	priv->bForcedSilentReset = false;
 	priv->bDisableNormalResetCheck = false;
 	priv->force_reset = false;
 

drivers/staging/rtl8192u/r8192U_dm.c

@@ -2419,9 +2419,9 @@ void dm_rf_pathcheck_workitemcallback(struct work_struct *work)
 	/* Check Bit 0-3, it means if RF A-D is enabled. */
 	for (i = 0; i < RF90_PATH_MAX; i++) {
 		if (rfpath & (0x01<<i))
-			priv->brfpath_rxenable[i] = 1;
+			priv->brfpath_rxenable[i] = true;
 		else
-			priv->brfpath_rxenable[i] = 0;
+			priv->brfpath_rxenable[i] = false;
 	}
 	if (!DM_RxPathSelTable.Enable)
 		return;

drivers/staging/vt6655/rxtx.c

@@ -248,11 +248,11 @@ s_uGetDataDuration(
 	unsigned char byFBOption
 )
 {
-	bool bLastFrag = 0;
+	bool bLastFrag = false;
 	unsigned int uAckTime = 0, uNextPktTime = 0;
 
 	if (uFragIdx == (uMACfragNum-1))
-		bLastFrag = 1;
+		bLastFrag = true;
 
 	switch (byDurType) {
 	case DATADUR_B:    //DATADUR_B