Merge tag 'upstream-4.14-rc1' of git://git.infradead.org/linux-ubifs

Pull UBI updates from Richard Weinberger:
 "Minor improvements"

* tag 'upstream-4.14-rc1' of git://git.infradead.org/linux-ubifs:
  UBI: Fix two typos in comments
  ubi: fastmap: fix spelling mistake: "invalidiate" -> "invalidate"
  ubi: pr_err() strings should end with newlines
  ubi: pr_err() strings should end with newlines
  ubi: pr_err() strings should end with newlines

drivers/mtd/ubi/block.c

@@ -383,7 +383,7 @@ int ubiblock_create(struct ubi_volume_info *vi)
 	/* Initialize the gendisk of this ubiblock device */
 	gd = alloc_disk(1);
 	if (!gd) {
-		pr_err("UBI: block: alloc_disk failed");
+		pr_err("UBI: block: alloc_disk failed\n");
 		ret = -ENODEV;
 		goto out_free_dev;
 	}
@@ -607,7 +607,7 @@ static void __init ubiblock_create_from_param(void)
 		desc = open_volume_desc(p->name, p->ubi_num, p->vol_id);
 		if (IS_ERR(desc)) {
 			pr_err(
-			       "UBI: block: can't open volume on ubi%d_%d, err=%ld",
+			       "UBI: block: can't open volume on ubi%d_%d, err=%ld\n",
 			       p->ubi_num, p->vol_id, PTR_ERR(desc));
 			continue;
 		}
@@ -618,7 +618,7 @@ static void __init ubiblock_create_from_param(void)
 		ret = ubiblock_create(&vi);
 		if (ret) {
 			pr_err(
-			       "UBI: block: can't add '%s' volume on ubi%d_%d, err=%d",
+			       "UBI: block: can't add '%s' volume on ubi%d_%d, err=%d\n",
 			       vi.name, p->ubi_num, p->vol_id, ret);
 			continue;
 		}

drivers/mtd/ubi/build.c

@@ -825,7 +825,7 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num,
 	for (i = 0; i < UBI_MAX_DEVICES; i++) {
 		ubi = ubi_devices[i];
 		if (ubi && mtd->index == ubi->mtd->index) {
-			pr_err("ubi: mtd%d is already attached to ubi%d",
+			pr_err("ubi: mtd%d is already attached to ubi%d\n",
 				mtd->index, i);
 			return -EEXIST;
 		}
@@ -840,7 +840,7 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num,
 	 * no sense to attach emulated MTD devices, so we prohibit this.
 	 */
 	if (mtd->type == MTD_UBIVOLUME) {
-		pr_err("ubi: refuse attaching mtd%d - it is already emulated on top of UBI",
+		pr_err("ubi: refuse attaching mtd%d - it is already emulated on top of UBI\n",
 			mtd->index);
 		return -EINVAL;
 	}
@@ -851,7 +851,7 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num,
 			if (!ubi_devices[ubi_num])
 				break;
 		if (ubi_num == UBI_MAX_DEVICES) {
-			pr_err("ubi: only %d UBI devices may be created",
+			pr_err("ubi: only %d UBI devices may be created\n",
 				UBI_MAX_DEVICES);
 			return -ENFILE;
 		}
@@ -861,7 +861,7 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num,
 
 		/* Make sure ubi_num is not busy */
 		if (ubi_devices[ubi_num]) {
-			pr_err("ubi: ubi%i already exists", ubi_num);
+			pr_err("ubi: ubi%i already exists\n", ubi_num);
 			return -EEXIST;
 		}
 	}
@@ -1166,7 +1166,7 @@ static int __init ubi_init(void)
 	BUILD_BUG_ON(sizeof(struct ubi_vid_hdr) != 64);
 
 	if (mtd_devs > UBI_MAX_DEVICES) {
-		pr_err("UBI error: too many MTD devices, maximum is %d",
+		pr_err("UBI error: too many MTD devices, maximum is %d\n",
 		       UBI_MAX_DEVICES);
 		return -EINVAL;
 	}
@@ -1178,7 +1178,7 @@ static int __init ubi_init(void)
 
 	err = misc_register(&ubi_ctrl_cdev);
 	if (err) {
-		pr_err("UBI error: cannot register device");
+		pr_err("UBI error: cannot register device\n");
 		goto out;
 	}
 
@@ -1205,7 +1205,7 @@ static int __init ubi_init(void)
 		mtd = open_mtd_device(p->name);
 		if (IS_ERR(mtd)) {
 			err = PTR_ERR(mtd);
-			pr_err("UBI error: cannot open mtd %s, error %d",
+			pr_err("UBI error: cannot open mtd %s, error %d\n",
 			       p->name, err);
 			/* See comment below re-ubi_is_module(). */
 			if (ubi_is_module())
@@ -1218,7 +1218,7 @@ static int __init ubi_init(void)
 					 p->vid_hdr_offs, p->max_beb_per1024);
 		mutex_unlock(&ubi_devices_mutex);
 		if (err < 0) {
-			pr_err("UBI error: cannot attach mtd%d",
+			pr_err("UBI error: cannot attach mtd%d\n",
 			       mtd->index);
 			put_mtd_device(mtd);
 
@@ -1242,7 +1242,7 @@ static int __init ubi_init(void)
 
 	err = ubiblock_init();
 	if (err) {
-		pr_err("UBI error: block: cannot initialize, error %d", err);
+		pr_err("UBI error: block: cannot initialize, error %d\n", err);
 
 		/* See comment above re-ubi_is_module(). */
 		if (ubi_is_module())
@@ -1265,7 +1265,7 @@ out_dev_unreg:
 	misc_deregister(&ubi_ctrl_cdev);
 out:
 	class_unregister(&ubi_class);
-	pr_err("UBI error: cannot initialize UBI, error %d", err);
+	pr_err("UBI error: cannot initialize UBI, error %d\n", err);
 	return err;
 }
 late_initcall(ubi_init);

drivers/mtd/ubi/fastmap.c

@@ -1667,7 +1667,7 @@ err:
 
 	ret = invalidate_fastmap(ubi);
 	if (ret < 0) {
-		ubi_err(ubi, "Unable to invalidiate current fastmap!");
+		ubi_err(ubi, "Unable to invalidate current fastmap!");
 		ubi_ro_mode(ubi);
 	} else {
 		return_fm_pebs(ubi, old_fm);

drivers/mtd/ubi/ubi-media.h

@@ -229,7 +229,7 @@ struct ubi_ec_hdr {
  * copy. UBI also calculates data CRC when the data is moved and stores it at
  * the @data_crc field of the copy (P1). So when UBI needs to pick one physical
  * eraseblock of two (P or P1), the @copy_flag of the newer one (P1) is
- * examined. If it is cleared, the situation* is simple and the newer one is
+ * examined. If it is cleared, the situation is simple and the newer one is
  * picked. If it is set, the data CRC of the copy (P1) is examined. If the CRC
  * checksum is correct, this physical eraseblock is selected (P1). Otherwise
  * the older one (P) is selected.
@@ -389,7 +389,7 @@ struct ubi_vtbl_record {
 #define UBI_FM_POOL_MAGIC	0x67AF4D08
 #define UBI_FM_EBA_MAGIC	0xf0c040a8
 
-/* A fastmap supber block can be located between PEB 0 and
+/* A fastmap super block can be located between PEB 0 and
  * UBI_FM_MAX_START */
 #define UBI_FM_MAX_START	64