ipw2100: don't return positive values to PCI probe on error

Causes the PCI stack to complain, and then eventually call the
PCI remove function, which ipw2100 is not expecting.  It then
tries to unregister an already-released netdev and other nasty
things, leading to a panic.

Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1185518

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/intel/ipw2x00/ipw2100.c

@@ -1724,7 +1724,7 @@ static const struct libipw_geo ipw_geos[] = {
 static int ipw2100_up(struct ipw2100_priv *priv, int deferred)
 {
 	unsigned long flags;
-	int rc = 0;
+	int err = 0;
 	u32 lock;
 	u32 ord_len = sizeof(lock);
 
@@ -1757,33 +1757,33 @@ static int ipw2100_up(struct ipw2100_priv *priv, int deferred)
 	if (priv->status & STATUS_POWERED ||
 	    (priv->status & STATUS_RESET_PENDING)) {
 		/* Power cycle the card ... */
-		if (ipw2100_power_cycle_adapter(priv)) {
+		err = ipw2100_power_cycle_adapter(priv);
+		if (err) {
 			printk(KERN_WARNING DRV_NAME
 			       ": %s: Could not cycle adapter.\n",
 			       priv->net_dev->name);
-			rc = 1;
 			goto exit;
 		}
 	} else
 		priv->status |= STATUS_POWERED;
 
 	/* Load the firmware, start the clocks, etc. */
-	if (ipw2100_start_adapter(priv)) {
+	err = ipw2100_start_adapter(priv);
+	if (err) {
 		printk(KERN_ERR DRV_NAME
 		       ": %s: Failed to start the firmware.\n",
 		       priv->net_dev->name);
-		rc = 1;
 		goto exit;
 	}
 
 	ipw2100_initialize_ordinals(priv);
 
 	/* Determine capabilities of this particular HW configuration */
-	if (ipw2100_get_hw_features(priv)) {
+	err = ipw2100_get_hw_features(priv);
+	if (err) {
 		printk(KERN_ERR DRV_NAME
 		       ": %s: Failed to determine HW features.\n",
 		       priv->net_dev->name);
-		rc = 1;
 		goto exit;
 	}
 
@@ -1792,11 +1792,11 @@ static int ipw2100_up(struct ipw2100_priv *priv, int deferred)
 	priv->ieee->freq_band = LIBIPW_24GHZ_BAND;
 
 	lock = LOCK_NONE;
-	if (ipw2100_set_ordinal(priv, IPW_ORD_PERS_DB_LOCK, &lock, &ord_len)) {
+	err = ipw2100_set_ordinal(priv, IPW_ORD_PERS_DB_LOCK, &lock, &ord_len);
+	if (err) {
 		printk(KERN_ERR DRV_NAME
 		       ": %s: Failed to clear ordinal lock.\n",
 		       priv->net_dev->name);
-		rc = 1;
 		goto exit;
 	}
 
@@ -1820,21 +1820,21 @@ static int ipw2100_up(struct ipw2100_priv *priv, int deferred)
 
 	/* Send all of the commands that must be sent prior to
 	 * HOST_COMPLETE */
-	if (ipw2100_adapter_setup(priv)) {
+	err = ipw2100_adapter_setup(priv);
+	if (err) {
 		printk(KERN_ERR DRV_NAME ": %s: Failed to start the card.\n",
 		       priv->net_dev->name);
-		rc = 1;
 		goto exit;
 	}
 
 	if (!deferred) {
 		/* Enable the adapter - sends HOST_COMPLETE */
-		if (ipw2100_enable_adapter(priv)) {
+		err = ipw2100_enable_adapter(priv);
+		if (err) {
 			printk(KERN_ERR DRV_NAME ": "
 			       "%s: failed in call to enable adapter.\n",
 			       priv->net_dev->name);
 			ipw2100_hw_stop_adapter(priv);
-			rc = 1;
 			goto exit;
 		}
 
@@ -1844,7 +1844,7 @@ static int ipw2100_up(struct ipw2100_priv *priv, int deferred)
 	}
 
       exit:
-	return rc;
+	return err;
 }
 
 static void ipw2100_down(struct ipw2100_priv *priv)