tty: 8250, remove shadow and unused variables

The compiler complains about variables that are set, but never used:
* intX variables in exar_handle_irq
  drivers/tty/serial/8250/8250_port.c:1864:34: warning: variable ‘int3’ set but not used [-Wunused-but-set-variable]
* val variable in pci_quatech_wqopr
  drivers/tty/serial/8250/8250_pci.c:1139:10: warning: variable ‘val’ set but not used [-Wunused-but-set-variable]

And about a shadow variable:
* tmout in wait_for_xmitr is defined twice with the same type. Both of
  them are also initialized before use.

Remove all of them.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Matt Schulte <matts@commtech-fastcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/tty/serial/8250/8250_pci.c

@@ -1136,11 +1136,11 @@ static int pci_quatech_rqopr(struct uart_8250_port *port)
 static void pci_quatech_wqopr(struct uart_8250_port *port, u8 qopr)
 {
 	unsigned long base = port->port.iobase;
-	u8 LCR, val;
+	u8 LCR;
 
 	LCR = inb(base + UART_LCR);
 	outb(0xBF, base + UART_LCR);
-	val = inb(base + UART_SCR);
+	inb(base + UART_SCR);
 	outb(qopr, base + UART_SCR);
 	outb(LCR, base + UART_LCR);
 }

drivers/tty/serial/8250/8250_port.c

@@ -1861,7 +1861,6 @@ static int serial8250_default_handle_irq(struct uart_port *port)
  */
 static int exar_handle_irq(struct uart_port *port)
 {
-	unsigned char int0, int1, int2, int3;
 	unsigned int iir = serial_port_in(port, UART_IIR);
 	int ret;
 
@@ -1869,10 +1868,10 @@ static int exar_handle_irq(struct uart_port *port)
 
 	if ((port->type == PORT_XR17V35X) ||
 	   (port->type == PORT_XR17D15X)) {
-		int0 = serial_port_in(port, 0x80);
-		int1 = serial_port_in(port, 0x81);
-		int2 = serial_port_in(port, 0x82);
-		int3 = serial_port_in(port, 0x83);
+		serial_port_in(port, 0x80);
+		serial_port_in(port, 0x81);
+		serial_port_in(port, 0x82);
+		serial_port_in(port, 0x83);
 	}
 
 	return ret;
@@ -1994,8 +1993,6 @@ static void wait_for_xmitr(struct uart_8250_port *up, int bits)
 
 	/* Wait up to 1s for flow control if necessary */
 	if (up->port.flags & UPF_CONS_FLOW) {
-		unsigned int tmout;
-
 		for (tmout = 1000000; tmout; tmout--) {
 			unsigned int msr = serial_in(up, UART_MSR);
 			up->msr_saved_flags |= msr & MSR_SAVE_FLAGS;