ALSA: line6: Distinguish device init (ctrl EP) and MIDI data transfer (int EP)

POD X3 can initialize similarly to older PODs, but it doesn't have the MIDI
interface. Instead, configuration is done via proprietary bulk EP messages.

Signed-off-by: Andrej Krutak <dev@andree.sk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

sound/usb/line6/driver.c

@@ -66,10 +66,17 @@ static int line6_start_listen(struct usb_line6 *line6)
 {
 	int err;
 
-	usb_fill_int_urb(line6->urb_listen, line6->usbdev,
-		usb_rcvintpipe(line6->usbdev, line6->properties->ep_ctrl_r),
-		line6->buffer_listen, LINE6_BUFSIZE_LISTEN,
-		line6_data_received, line6, line6->interval);
+	if (line6->properties->capabilities & LINE6_CAP_CONTROL_MIDI) {
+		usb_fill_int_urb(line6->urb_listen, line6->usbdev,
+			usb_rcvintpipe(line6->usbdev, line6->properties->ep_ctrl_r),
+			line6->buffer_listen, LINE6_BUFSIZE_LISTEN,
+			line6_data_received, line6, line6->interval);
+	} else {
+		usb_fill_bulk_urb(line6->urb_listen, line6->usbdev,
+			usb_rcvbulkpipe(line6->usbdev, line6->properties->ep_ctrl_r),
+			line6->buffer_listen, LINE6_BUFSIZE_LISTEN,
+			line6_data_received, line6);
+	}
 	line6->urb_listen->actual_length = 0;
 	err = usb_submit_urb(line6->urb_listen, GFP_ATOMIC);
 	return err;
@@ -90,6 +97,7 @@ static int line6_send_raw_message(struct usb_line6 *line6, const char *buffer,
 				  int size)
 {
 	int i, done = 0;
+	const struct line6_properties *properties = line6->properties;
 
 	for (i = 0; i < size; i += line6->max_packet_size) {
 		int partial;
@@ -97,15 +105,21 @@ static int line6_send_raw_message(struct usb_line6 *line6, const char *buffer,
 		int frag_size = min(line6->max_packet_size, size - i);
 		int retval;
 
-		retval = usb_interrupt_msg(line6->usbdev,
-					usb_sndintpipe(line6->usbdev,
-						line6->properties->ep_ctrl_w),
-					(char *)frag_buf, frag_size,
-					&partial, LINE6_TIMEOUT * HZ);
+		if (properties->capabilities & LINE6_CAP_CONTROL_MIDI) {
+			retval = usb_interrupt_msg(line6->usbdev,
+						usb_sndintpipe(line6->usbdev, properties->ep_ctrl_w),
+						(char *)frag_buf, frag_size,
+						&partial, LINE6_TIMEOUT * HZ);
+		} else {
+			retval = usb_bulk_msg(line6->usbdev,
+						usb_sndbulkpipe(line6->usbdev, properties->ep_ctrl_w),
+						(char *)frag_buf, frag_size,
+						&partial, LINE6_TIMEOUT * HZ);
+		}
 
 		if (retval) {
 			dev_err(line6->ifcdev,
-				"usb_interrupt_msg failed (%d)\n", retval);
+				"usb_bulk_msg failed (%d)\n", retval);
 			break;
 		}
 
@@ -140,10 +154,17 @@ static int line6_send_raw_message_async_part(struct message *msg,
 	int done = msg->done;
 	int bytes = min(msg->size - done, line6->max_packet_size);
 
-	usb_fill_int_urb(urb, line6->usbdev,
-		usb_sndintpipe(line6->usbdev, line6->properties->ep_ctrl_w),
-		(char *)msg->buffer + done, bytes,
-		line6_async_request_sent, msg, line6->interval);
+	if (line6->properties->capabilities & LINE6_CAP_CONTROL_MIDI) {
+		usb_fill_int_urb(urb, line6->usbdev,
+			usb_sndintpipe(line6->usbdev, line6->properties->ep_ctrl_w),
+			(char *)msg->buffer + done, bytes,
+			line6_async_request_sent, msg, line6->interval);
+	} else {
+		usb_fill_bulk_urb(urb, line6->usbdev,
+			usb_sndbulkpipe(line6->usbdev, line6->properties->ep_ctrl_w),
+			(char *)msg->buffer + done, bytes,
+			line6_async_request_sent, msg);
+	}
 
 	msg->done += bytes;
 	retval = usb_submit_urb(urb, GFP_ATOMIC);
@@ -462,7 +483,18 @@ static void line6_destruct(struct snd_card *card)
 static void line6_get_interval(struct usb_line6 *line6)
 {
 	struct usb_device *usbdev = line6->usbdev;
-	struct usb_host_endpoint *ep = usbdev->ep_in[line6->properties->ep_ctrl_r];
+	const struct line6_properties *properties = line6->properties;
+	int pipe;
+	struct usb_host_endpoint *ep;
+
+	if (properties->capabilities & LINE6_CAP_CONTROL_MIDI) {
+		pipe =
+			usb_rcvintpipe(line6->usbdev, line6->properties->ep_ctrl_r);
+	} else {
+		pipe =
+			usb_rcvbulkpipe(line6->usbdev, line6->properties->ep_ctrl_r);
+	}
+	ep = usbdev->ep_in[usb_pipeendpoint(pipe)];
 
 	if (ep) {
 		line6->interval = ep->desc.bInterval;
@@ -483,7 +515,7 @@ static void line6_get_interval(struct usb_line6 *line6)
 	}
 }
 
-static int line6_init_cap_control(struct usb_line6 *line6)
+static int line6_init_cap_control_midi(struct usb_line6 *line6)
 {
 	int ret;
 
@@ -573,8 +605,8 @@ int line6_probe(struct usb_interface *interface,
 
 	line6_get_interval(line6);
 
-	if (properties->capabilities & LINE6_CAP_CONTROL) {
-		ret = line6_init_cap_control(line6);
+	if (properties->capabilities & LINE6_CAP_CONTROL_MIDI) {
+		ret = line6_init_cap_control_midi(line6);
 		if (ret < 0)
 			goto error;
 	}
@@ -644,7 +676,7 @@ int line6_suspend(struct usb_interface *interface, pm_message_t message)
 
 	snd_power_change_state(line6->card, SNDRV_CTL_POWER_D3hot);
 
-	if (line6->properties->capabilities & LINE6_CAP_CONTROL)
+	if (line6->properties->capabilities & LINE6_CAP_CONTROL_MIDI)
 		line6_stop_listen(line6);
 
 	if (line6pcm != NULL) {
@@ -663,7 +695,7 @@ int line6_resume(struct usb_interface *interface)
 {
 	struct usb_line6 *line6 = usb_get_intfdata(interface);
 
-	if (line6->properties->capabilities & LINE6_CAP_CONTROL)
+	if (line6->properties->capabilities & LINE6_CAP_CONTROL_MIDI)
 		line6_start_listen(line6);
 
 	snd_power_change_state(line6->card, SNDRV_CTL_POWER_D0);

sound/usb/line6/driver.h

@@ -104,6 +104,8 @@ enum {
 	LINE6_CAP_HWMON =	1 << 2,
 	/* device requires output data when input is read */
 	LINE6_CAP_IN_NEEDS_OUT = 1 << 3,
+	/* device uses raw MIDI via USB (data endpoints) */
+	LINE6_CAP_CONTROL_MIDI = 1 << 4,
 };
 
 /*
@@ -142,10 +144,10 @@ struct usb_line6 {
 	/* Line 6 MIDI device data structure */
 	struct snd_line6_midi *line6midi;
 
-	/* URB for listening to PODxt Pro control endpoint */
+	/* URB for listening to POD data endpoint */
 	struct urb *urb_listen;
 
-	/* Buffer for listening to PODxt Pro control endpoint */
+	/* Buffer for listening to POD data endpoint */
 	unsigned char *buffer_listen;
 
 	/* Buffer for message to be processed */

sound/usb/line6/pod.c

@@ -475,6 +475,7 @@ static const struct line6_properties pod_properties_table[] = {
 		.id = "BassPODxt",
 		.name = "BassPODxt",
 		.capabilities	= LINE6_CAP_CONTROL
+				| LINE6_CAP_CONTROL_MIDI
 				| LINE6_CAP_PCM
 				| LINE6_CAP_HWMON,
 		.altsetting = 5,
@@ -487,6 +488,7 @@ static const struct line6_properties pod_properties_table[] = {
 		.id = "BassPODxtLive",
 		.name = "BassPODxt Live",
 		.capabilities	= LINE6_CAP_CONTROL
+				| LINE6_CAP_CONTROL_MIDI
 				| LINE6_CAP_PCM
 				| LINE6_CAP_HWMON,
 		.altsetting = 1,
@@ -499,6 +501,7 @@ static const struct line6_properties pod_properties_table[] = {
 		.id = "BassPODxtPro",
 		.name = "BassPODxt Pro",
 		.capabilities	= LINE6_CAP_CONTROL
+				| LINE6_CAP_CONTROL_MIDI
 				| LINE6_CAP_PCM
 				| LINE6_CAP_HWMON,
 		.altsetting = 5,
@@ -510,7 +513,8 @@ static const struct line6_properties pod_properties_table[] = {
 	[LINE6_POCKETPOD] = {
 		.id = "PocketPOD",
 		.name = "Pocket POD",
-		.capabilities	= LINE6_CAP_CONTROL,
+		.capabilities	= LINE6_CAP_CONTROL
+				| LINE6_CAP_CONTROL_MIDI,
 		.altsetting = 0,
 		.ep_ctrl_r = 0x82,
 		.ep_ctrl_w = 0x02,
@@ -520,6 +524,7 @@ static const struct line6_properties pod_properties_table[] = {
 		.id = "PODxt",
 		.name = "PODxt",
 		.capabilities	= LINE6_CAP_CONTROL
+				| LINE6_CAP_CONTROL_MIDI
 				| LINE6_CAP_PCM
 				| LINE6_CAP_HWMON,
 		.altsetting = 5,
@@ -532,6 +537,7 @@ static const struct line6_properties pod_properties_table[] = {
 		.id = "PODxtLive",
 		.name = "PODxt Live",
 		.capabilities	= LINE6_CAP_CONTROL
+				| LINE6_CAP_CONTROL_MIDI
 				| LINE6_CAP_PCM
 				| LINE6_CAP_HWMON,
 		.altsetting = 1,
@@ -544,6 +550,7 @@ static const struct line6_properties pod_properties_table[] = {
 		.id = "PODxtPro",
 		.name = "PODxt Pro",
 		.capabilities	= LINE6_CAP_CONTROL
+				| LINE6_CAP_CONTROL_MIDI
 				| LINE6_CAP_PCM
 				| LINE6_CAP_HWMON,
 		.altsetting = 5,

sound/usb/line6/variax.c

@@ -259,7 +259,8 @@ static const struct line6_properties variax_properties_table[] = {
 	[LINE6_PODXTLIVE_VARIAX] = {
 		.id = "PODxtLive",
 		.name = "PODxt Live",
-		.capabilities	= LINE6_CAP_CONTROL,
+		.capabilities	= LINE6_CAP_CONTROL
+				| LINE6_CAP_CONTROL_MIDI,
 		.altsetting = 1,
 		.ep_ctrl_r = 0x86,
 		.ep_ctrl_w = 0x05,
@@ -269,7 +270,8 @@ static const struct line6_properties variax_properties_table[] = {
 	[LINE6_VARIAX] = {
 		.id = "Variax",
 		.name = "Variax Workbench",
-		.capabilities	= LINE6_CAP_CONTROL,
+		.capabilities	= LINE6_CAP_CONTROL
+				| LINE6_CAP_CONTROL_MIDI,
 		.altsetting = 1,
 		.ep_ctrl_r = 0x82,
 		.ep_ctrl_w = 0x01,