Merge 'mmc/upstream' into late/mvebu2

These patches from the mmc tree were merged into v3.9 already
and the later mvebu patches depend on them.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/device-mapper/dm-raid.txt

@@ -141,3 +141,4 @@ Version History
 1.2.0	Handle creation of arrays that contain failed devices.
 1.3.0	Added support for RAID 10
 1.3.1	Allow device replacement/rebuild for RAID 10
+1.3.2   Fix/improve redundancy checking for RAID10

Documentation/hid/hid-sensor.txt

@@ -57,6 +57,10 @@ Protocol 2.10:	(Kernel 2.6.31) Added a protocol for relaxed alignment
 Protocol 2.11:	(Kernel 3.6) Added a field for offset of EFI handover
 		protocol entry point.
 
+Protocol 2.12:	(Kernel 3.9) Added the xloadflags field and extension fields
+	 	to struct boot_params for for loading bzImage and ramdisk
+		above 4G in 64bit.
+
 **** MEMORY LAYOUT
 
 The traditional memory map for the kernel loader, used for Image or
@@ -182,7 +186,7 @@ Offset	Proto	Name		Meaning
 0230/4	2.05+	kernel_alignment Physical addr alignment required for kernel
 0234/1	2.05+	relocatable_kernel Whether kernel is relocatable or not
 0235/1	2.10+	min_alignment	Minimum alignment, as a power of two
-0236/2	N/A	pad3		Unused
+0236/2	2.12+	xloadflags	Boot protocol option flags
 0238/4	2.06+	cmdline_size	Maximum size of the kernel command line
 023C/4	2.07+	hardware_subarch Hardware subarchitecture
 0240/8	2.07+	hardware_subarch_data Subarchitecture-specific data
@@ -582,6 +586,27 @@ Protocol:	2.10+
   misaligned kernel.  Therefore, a loader should typically try each
   power-of-two alignment from kernel_alignment down to this alignment.
 
+Field name:     xloadflags
+Type:           read
+Offset/size:    0x236/2
+Protocol:       2.12+
+
+  This field is a bitmask.
+
+  Bit 0 (read):	XLF_KERNEL_64
+	- If 1, this kernel has the legacy 64-bit entry point at 0x200.
+
+  Bit 1 (read): XLF_CAN_BE_LOADED_ABOVE_4G
+        - If 1, kernel/boot_params/cmdline/ramdisk can be above 4G.
+
+  Bit 2 (read):	XLF_EFI_HANDOVER_32
+	- If 1, the kernel supports the 32-bit EFI handoff entry point
+          given at handover_offset.
+
+  Bit 3 (read): XLF_EFI_HANDOVER_64
+	- If 1, the kernel supports the 64-bit EFI handoff entry point
+          given at handover_offset + 0x200.
+
 Field name:	cmdline_size
 Type:		read
 Offset/size:	0x238/4

Documentation/x86/zero-page.txt

@@ -19,6 +19,9 @@ Offset	Proto	Name		Meaning
 090/010	ALL	hd1_info	hd1 disk parameter, OBSOLETE!!
 0A0/010	ALL	sys_desc_table	System description table (struct sys_desc_table)
 0B0/010	ALL	olpc_ofw_header	OLPC's OpenFirmware CIF and friends
+0C0/004	ALL	ext_ramdisk_image ramdisk_image high 32bits
+0C4/004	ALL	ext_ramdisk_size  ramdisk_size high 32bits
+0C8/004	ALL	ext_cmd_line_ptr  cmd_line_ptr high 32bits
 140/080	ALL	edid_info	Video mode setup (struct edid_info)
 1C0/020	ALL	efi_info	EFI 32 information (struct efi_info)
 1E0/004	ALL	alk_mem_k	Alternative mem check, in KB
@@ -27,6 +30,7 @@ Offset	Proto	Name		Meaning
 1E9/001	ALL	eddbuf_entries	Number of entries in eddbuf (below)
 1EA/001	ALL	edd_mbr_sig_buf_entries	Number of entries in edd_mbr_sig_buffer
 				(below)
+1EF/001	ALL	sentinel	Used to detect broken bootloaders
 290/040	ALL	edd_mbr_sig_buffer EDD MBR signatures
 2D0/A00	ALL	e820_map	E820 memory map table
 				(array of struct e820entry)

MAINTAINERS

@@ -2966,7 +2966,7 @@ S:	Maintained
 F:	drivers/net/ethernet/i825xx/eexpress.*
 
 ETHERNET BRIDGE
-M:	Stephen Hemminger <shemminger@vyatta.com>
+M:	Stephen Hemminger <stephen@networkplumber.org>
 L:	bridge@lists.linux-foundation.org
 L:	netdev@vger.kernel.org
 W:	http://www.linuxfoundation.org/en/Net:Bridge
@@ -4905,7 +4905,7 @@ S:	Maintained
 
 MARVELL GIGABIT ETHERNET DRIVERS (skge/sky2)
 M:	Mirko Lindner <mlindner@marvell.com>
-M:	Stephen Hemminger <shemminger@vyatta.com>
+M:	Stephen Hemminger <stephen@networkplumber.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ethernet/marvell/sk*
@@ -5180,7 +5180,7 @@ S:	Supported
 F:	drivers/infiniband/hw/nes/
 
 NETEM NETWORK EMULATOR
-M:	Stephen Hemminger <shemminger@vyatta.com>
+M:	Stephen Hemminger <stephen@networkplumber.org>
 L:	netem@lists.linux-foundation.org
 S:	Maintained
 F:	net/sched/sch_netem.c
@@ -7088,7 +7088,7 @@ F:	include/uapi/sound/
 F:	sound/
 
 SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC)
-M:	Liam Girdwood <lrg@ti.com>
+M:	Liam Girdwood <lgirdwood@gmail.com>
 M:	Mark Brown <broonie@opensource.wolfsonmicro.com>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)

Makefile

@@ -1,8 +1,8 @@
 VERSION = 3
 PATCHLEVEL = 8
 SUBLEVEL = 0
-EXTRAVERSION = -rc5
-NAME = Terrified Chipmunk
+EXTRAVERSION = -rc6
+NAME = Unicycling Gorilla
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"

arch/mips/bcm47xx/Kconfig

@@ -8,8 +8,10 @@ config BCM47XX_SSB
 	select SSB_DRIVER_EXTIF
 	select SSB_EMBEDDED
 	select SSB_B43_PCI_BRIDGE if PCI
+	select SSB_DRIVER_PCICORE if PCI
 	select SSB_PCICORE_HOSTMODE if PCI
 	select SSB_DRIVER_GPIO
+	select GPIOLIB
 	default y
 	help
 	 Add support for old Broadcom BCM47xx boards with Sonics Silicon Backplane support.
@@ -25,6 +27,7 @@ config BCM47XX_BCMA
 	select BCMA_HOST_PCI if PCI
 	select BCMA_DRIVER_PCI_HOSTMODE if PCI
 	select BCMA_DRIVER_GPIO
+	select GPIOLIB
 	default y
 	help
 	 Add support for new Broadcom BCM47xx boards with Broadcom specific Advanced Microcontroller Bus.

arch/mips/cavium-octeon/executive/cvmx-l2c.c

@@ -30,6 +30,7 @@
  * measurement, and debugging facilities.
  */
 
+#include <linux/compiler.h>
 #include <linux/irqflags.h>
 #include <asm/octeon/cvmx.h>
 #include <asm/octeon/cvmx-l2c.h>
@@ -285,22 +286,22 @@ uint64_t cvmx_l2c_read_perf(uint32_t counter)
  */
 static void fault_in(uint64_t addr, int len)
 {
-	volatile char *ptr;
-	volatile char dummy;
+	char *ptr;
+
 	/*
 	 * Adjust addr and length so we get all cache lines even for
 	 * small ranges spanning two cache lines.
 	 */
 	len += addr & CVMX_CACHE_LINE_MASK;
 	addr &= ~CVMX_CACHE_LINE_MASK;
-	ptr = (volatile char *)cvmx_phys_to_ptr(addr);
+	ptr = cvmx_phys_to_ptr(addr);
 	/*
 	 * Invalidate L1 cache to make sure all loads result in data
 	 * being in L2.
 	 */
 	CVMX_DCACHE_INVALIDATE;
 	while (len > 0) {
-		dummy += *ptr;
+		ACCESS_ONCE(*ptr);
 		len -= CVMX_CACHE_LINE_SIZE;
 		ptr += CVMX_CACHE_LINE_SIZE;
 	}

arch/mips/include/asm/dsp.h

@@ -16,7 +16,7 @@
 #include <asm/mipsregs.h>
 
 #define DSP_DEFAULT	0x00000000
-#define DSP_MASK	0x3ff
+#define DSP_MASK	0x3f
 
 #define __enable_dsp_hazard()						\
 do {									\

arch/mips/include/asm/inst.h

@@ -353,6 +353,7 @@ union mips_instruction {
 	struct u_format u_format;
 	struct c_format c_format;
 	struct r_format r_format;
+	struct p_format p_format;
 	struct f_format f_format;
 	struct ma_format ma_format;
 	struct b_format b_format;

arch/mips/include/asm/mach-pnx833x/war.h

@@ -21,4 +21,4 @@
 #define R10000_LLSC_WAR			0
 #define MIPS34K_MISSED_ITLB_WAR		0
 
-#endif /* __ASM_MIPS_MACH_PNX8550_WAR_H */
+#endif /* __ASM_MIPS_MACH_PNX833X_WAR_H */

arch/mips/include/asm/pgtable-64.h

@@ -230,6 +230,7 @@ static inline void pud_clear(pud_t *pudp)
 #else
 #define pte_pfn(x)		((unsigned long)((x).pte >> _PFN_SHIFT))
 #define pfn_pte(pfn, prot)	__pte(((pfn) << _PFN_SHIFT) | pgprot_val(prot))
+#define pfn_pmd(pfn, prot)	__pmd(((pfn) << _PFN_SHIFT) | pgprot_val(prot))
 #endif
 
 #define __pgd_offset(address)	pgd_index(address)

arch/mips/include/uapi/asm/Kbuild

@@ -3,6 +3,7 @@ include include/uapi/asm-generic/Kbuild.asm
 
 header-y += auxvec.h
 header-y += bitsperlong.h
+header-y += break.h
 header-y += byteorder.h
 header-y += cachectl.h
 header-y += errno.h

arch/mips/kernel/ftrace.c

@@ -25,6 +25,12 @@
 #define MCOUNT_OFFSET_INSNS 4
 #endif
 
+/* Arch override because MIPS doesn't need to run this from stop_machine() */
+void arch_ftrace_update_code(int command)
+{
+	ftrace_modify_all_code(command);
+}
+
 /*
  * Check if the address is in kernel space
  *
@@ -89,6 +95,24 @@ static int ftrace_modify_code(unsigned long ip, unsigned int new_code)
 	return 0;
 }
 
+#ifndef CONFIG_64BIT
+static int ftrace_modify_code_2(unsigned long ip, unsigned int new_code1,
+				unsigned int new_code2)
+{
+	int faulted;
+
+	safe_store_code(new_code1, ip, faulted);
+	if (unlikely(faulted))
+		return -EFAULT;
+	ip += 4;
+	safe_store_code(new_code2, ip, faulted);
+	if (unlikely(faulted))
+		return -EFAULT;
+	flush_icache_range(ip, ip + 8); /* original ip + 12 */
+	return 0;
+}
+#endif
+
 /*
  * The details about the calling site of mcount on MIPS
  *
@@ -131,8 +155,18 @@ int ftrace_make_nop(struct module *mod,
 	 * needed.
 	 */
 	new = in_kernel_space(ip) ? INSN_NOP : INSN_B_1F;
-
+#ifdef CONFIG_64BIT
 	return ftrace_modify_code(ip, new);
+#else
+	/*
+	 * On 32 bit MIPS platforms, gcc adds a stack adjust
+	 * instruction in the delay slot after the branch to
+	 * mcount and expects mcount to restore the sp on return.
+	 * This is based on a legacy API and does nothing but
+	 * waste instructions so it's being removed at runtime.
+	 */
+	return ftrace_modify_code_2(ip, new, INSN_NOP);
+#endif
 }
 
 int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)

arch/mips/kernel/mcount.S

@@ -46,9 +46,8 @@
 	PTR_L	a5, PT_R9(sp)
 	PTR_L	a6, PT_R10(sp)
 	PTR_L	a7, PT_R11(sp)
-	PTR_ADDIU	sp, PT_SIZE
 #else
-	PTR_ADDIU	sp, (PT_SIZE + 8)
+	PTR_ADDIU	sp, PT_SIZE
 #endif
 .endm
 
@@ -69,7 +68,9 @@ NESTED(ftrace_caller, PT_SIZE, ra)
 	.globl _mcount
 _mcount:
 	b	ftrace_stub
-	 nop
+	addiu sp,sp,8
+
+	/* When tracing is activated, it calls ftrace_caller+8 (aka here) */
 	lw	t1, function_trace_stop
 	bnez	t1, ftrace_stub
 	 nop

arch/mips/kernel/vpe.c

@@ -705,7 +705,7 @@ static int vpe_run(struct vpe * v)
 
 			printk(KERN_WARNING
 			       "VPE loader: TC %d is already in use.\n",
-                               t->index);
+			       v->tc->index);
 			return -ENOEXEC;
 		}
 	} else {

arch/mips/lantiq/irq.c

@@ -408,7 +408,7 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent)
 #endif
 
 	/* tell oprofile which irq to use */
-	cp0_perfcount_irq = LTQ_PERF_IRQ;
+	cp0_perfcount_irq = irq_create_mapping(ltq_domain, LTQ_PERF_IRQ);
 
 	/*
 	 * if the timer irq is not one of the mips irqs we need to

arch/mips/lib/delay.c

@@ -21,7 +21,7 @@ void __delay(unsigned long loops)
 	"	.set	noreorder				\n"
 	"	.align	3					\n"
 	"1:	bnez	%0, 1b					\n"
-#if __SIZEOF_LONG__ == 4
+#if BITS_PER_LONG == 32
 	"	subu	%0, 1					\n"
 #else
 	"	dsubu	%0, 1					\n"

arch/mips/mm/ioremap.c

@@ -190,9 +190,3 @@ void __iounmap(const volatile void __iomem *addr)
 
 EXPORT_SYMBOL(__ioremap);
 EXPORT_SYMBOL(__iounmap);
-
-int __virt_addr_valid(const volatile void *kaddr)
-{
-	return pfn_valid(PFN_DOWN(virt_to_phys(kaddr)));
-}
-EXPORT_SYMBOL_GPL(__virt_addr_valid);

arch/mips/mm/mmap.c

@@ -192,3 +192,9 @@ unsigned long arch_randomize_brk(struct mm_struct *mm)
 
 	return ret;
 }
+
+int __virt_addr_valid(const volatile void *kaddr)
+{
+	return pfn_valid(PFN_DOWN(virt_to_phys(kaddr)));
+}
+EXPORT_SYMBOL_GPL(__virt_addr_valid);

arch/mips/netlogic/xlr/setup.c

@@ -193,8 +193,11 @@ static void nlm_init_node(void)
 
 void __init prom_init(void)
 {
-	int i, *argv, *envp;		/* passed as 32 bit ptrs */
+	int *argv, *envp;		/* passed as 32 bit ptrs */
 	struct psb_info *prom_infop;
+#ifdef CONFIG_SMP
+	int i;
+#endif
 
 	/* truncate to 32 bit and sign extend all args */
 	argv = (int *)(long)(int)fw_arg1;

arch/mips/pci/pci-ar71xx.c

@@ -24,7 +24,7 @@
 #include <asm/mach-ath79/pci.h>
 
 #define AR71XX_PCI_MEM_BASE	0x10000000
-#define AR71XX_PCI_MEM_SIZE	0x08000000
+#define AR71XX_PCI_MEM_SIZE	0x07000000
 
 #define AR71XX_PCI_WIN0_OFFS		0x10000000
 #define AR71XX_PCI_WIN1_OFFS		0x11000000

arch/mips/pci/pci-ar724x.c

@@ -21,7 +21,7 @@
 #define AR724X_PCI_CTRL_SIZE	0x100
 
 #define AR724X_PCI_MEM_BASE	0x10000000
-#define AR724X_PCI_MEM_SIZE	0x08000000
+#define AR724X_PCI_MEM_SIZE	0x04000000
 
 #define AR724X_PCI_REG_RESET		0x18
 #define AR724X_PCI_REG_INT_STATUS	0x4c

arch/powerpc/kernel/entry_32.S

@@ -439,6 +439,8 @@ ret_from_fork:
 ret_from_kernel_thread:
 	REST_NVGPRS(r1)
 	bl	schedule_tail
+	li	r3,0
+	stw	r3,0(r1)
 	mtlr	r14
 	mr	r3,r15
 	PPC440EP_ERR42

arch/powerpc/kernel/entry_64.S

@@ -664,6 +664,19 @@ resume_kernel:
 	ld	r4,TI_FLAGS(r9)
 	andi.	r0,r4,_TIF_NEED_RESCHED
 	bne	1b
+
+	/*
+	 * arch_local_irq_restore() from preempt_schedule_irq above may
+	 * enable hard interrupt but we really should disable interrupts
+	 * when we return from the interrupt, and so that we don't get
+	 * interrupted after loading SRR0/1.
+	 */
+#ifdef CONFIG_PPC_BOOK3E
+	wrteei	0
+#else
+	ld	r10,PACAKMSR(r13) /* Get kernel MSR without EE */
+	mtmsrd	r10,1		  /* Update machine state */
+#endif /* CONFIG_PPC_BOOK3E */
 #endif /* CONFIG_PREEMPT */
 
 	.globl	fast_exc_return_irq

arch/powerpc/kernel/kgdb.c

@@ -154,12 +154,12 @@ static int kgdb_handle_breakpoint(struct pt_regs *regs)
 static int kgdb_singlestep(struct pt_regs *regs)
 {
 	struct thread_info *thread_info, *exception_thread_info;
-	struct thread_info *backup_current_thread_info = \
-		(struct thread_info *)kmalloc(sizeof(struct thread_info), GFP_KERNEL);
+	struct thread_info *backup_current_thread_info;
 
 	if (user_mode(regs))
 		return 0;
 
+	backup_current_thread_info = (struct thread_info *)kmalloc(sizeof(struct thread_info), GFP_KERNEL);
 	/*
 	 * On Book E and perhaps other processors, singlestep is handled on
 	 * the critical exception stack.  This causes current_thread_info()
@@ -185,6 +185,7 @@ static int kgdb_singlestep(struct pt_regs *regs)
 		/* Restore current_thread_info lastly. */
 		memcpy(exception_thread_info, backup_current_thread_info, sizeof *thread_info);
 
+	kfree(backup_current_thread_info);
 	return 1;
 }
 

arch/powerpc/kernel/time.c

@@ -494,10 +494,15 @@ void timer_interrupt(struct pt_regs * regs)
 	set_dec(DECREMENTER_MAX);
 
 	/* Some implementations of hotplug will get timer interrupts while
-	 * offline, just ignore these
+	 * offline, just ignore these and we also need to set
+	 * decrementers_next_tb as MAX to make sure __check_irq_replay
+	 * don't replay timer interrupt when return, otherwise we'll trap
+	 * here infinitely :(
 	 */
-	if (!cpu_online(smp_processor_id()))
+	if (!cpu_online(smp_processor_id())) {
+		*next_tb = ~(u64)0;
 		return;
+	}
 
 	/* Conditionally hard-enable interrupts now that the DEC has been
 	 * bumped to its maximum value

arch/powerpc/oprofile/op_model_power4.c

@@ -52,7 +52,7 @@ static int power7_marked_instr_event(u64 mmcr1)
 	for (pmc = 0; pmc < 4; pmc++) {
 		psel = mmcr1 & (OPROFILE_PM_PMCSEL_MSK
 				<< (OPROFILE_MAX_PMC_NUM - pmc)
-				* OPROFILE_MAX_PMC_NUM);
+				* OPROFILE_PMSEL_FIELD_WIDTH);
 		psel = (psel >> ((OPROFILE_MAX_PMC_NUM - pmc)
 				 * OPROFILE_PMSEL_FIELD_WIDTH)) & ~1ULL;
 		unit = mmcr1 & (OPROFILE_PM_UNIT_MSK

arch/powerpc/platforms/pasemi/cpufreq.c

@@ -236,6 +236,13 @@ out:
 
 static int pas_cpufreq_cpu_exit(struct cpufreq_policy *policy)
 {
+	/*
+	 * We don't support CPU hotplug. Don't unmap after the system
+	 * has already made it to a running state.
+	 */
+	if (system_state != SYSTEM_BOOTING)
+		return 0;
+
 	if (sdcasr_mapbase)
 		iounmap(sdcasr_mapbase);
 	if (sdcpwr_mapbase)

arch/s390/include/asm/pgtable.h

@@ -1365,6 +1365,18 @@ static inline void pmdp_invalidate(struct vm_area_struct *vma,
 	__pmd_idte(address, pmdp);
 }
 
+#define __HAVE_ARCH_PMDP_SET_WRPROTECT
+static inline void pmdp_set_wrprotect(struct mm_struct *mm,
+				      unsigned long address, pmd_t *pmdp)
+{
+	pmd_t pmd = *pmdp;
+
+	if (pmd_write(pmd)) {
+		__pmd_idte(address, pmdp);
+		set_pmd_at(mm, address, pmdp, pmd_wrprotect(pmd));
+	}
+}
+
 static inline pmd_t mk_pmd_phys(unsigned long physpage, pgprot_t pgprot)
 {
 	pmd_t __pmd;

arch/x86/Kconfig

@@ -2138,6 +2138,7 @@ config OLPC_XO1_RTC
 config OLPC_XO1_SCI
 	bool "OLPC XO-1 SCI extras"
 	depends on OLPC && OLPC_XO1_PM
+	depends on INPUT=y
 	select POWER_SUPPLY
 	select GPIO_CS5535
 	select MFD_CORE

arch/x86/boot/Makefile

@@ -71,7 +71,7 @@ GCOV_PROFILE := n
 $(obj)/bzImage: asflags-y  := $(SVGA_MODE)
 
 quiet_cmd_image = BUILD   $@
-cmd_image = $(obj)/tools/build $(obj)/setup.bin $(obj)/vmlinux.bin > $@
+cmd_image = $(obj)/tools/build $(obj)/setup.bin $(obj)/vmlinux.bin $(obj)/zoffset.h > $@
 
 $(obj)/bzImage: $(obj)/setup.bin $(obj)/vmlinux.bin $(obj)/tools/build FORCE
 	$(call if_changed,image)
@@ -92,7 +92,7 @@ targets += voffset.h
 $(obj)/voffset.h: vmlinux FORCE
 	$(call if_changed,voffset)
 
-sed-zoffset := -e 's/^\([0-9a-fA-F]*\) . \(startup_32\|input_data\|_end\|z_.*\)$$/\#define ZO_\2 0x\1/p'
+sed-zoffset := -e 's/^\([0-9a-fA-F]*\) . \(startup_32\|startup_64\|efi_pe_entry\|efi_stub_entry\|input_data\|_end\|z_.*\)$$/\#define ZO_\2 0x\1/p'
 
 quiet_cmd_zoffset = ZOFFSET $@
       cmd_zoffset = $(NM) $< | sed -n $(sed-zoffset) > $@

arch/x86/boot/compressed/eboot.c

@@ -256,10 +256,10 @@ static efi_status_t setup_efi_pci(struct boot_params *params)
 	int i;
 	struct setup_data *data;
 
-	data = (struct setup_data *)params->hdr.setup_data;
+	data = (struct setup_data *)(unsigned long)params->hdr.setup_data;
 
 	while (data && data->next)
-		data = (struct setup_data *)data->next;
+		data = (struct setup_data *)(unsigned long)data->next;
 
 	status = efi_call_phys5(sys_table->boottime->locate_handle,
 				EFI_LOCATE_BY_PROTOCOL, &pci_proto,
@@ -295,16 +295,18 @@ static efi_status_t setup_efi_pci(struct boot_params *params)
 		if (!pci)
 			continue;
 
+#ifdef CONFIG_X86_64
 		status = efi_call_phys4(pci->attributes, pci,
 					EfiPciIoAttributeOperationGet, 0,
 					&attributes);
-
+#else
+		status = efi_call_phys5(pci->attributes, pci,
+					EfiPciIoAttributeOperationGet, 0, 0,
+					&attributes);
+#endif
 		if (status != EFI_SUCCESS)
 			continue;
 
-		if (!(attributes & EFI_PCI_IO_ATTRIBUTE_EMBEDDED_ROM))
-			continue;
-
 		if (!pci->romimage || !pci->romsize)
 			continue;
 
@@ -345,9 +347,9 @@ static efi_status_t setup_efi_pci(struct boot_params *params)
 		memcpy(rom->romdata, pci->romimage, pci->romsize);
 
 		if (data)
-			data->next = (uint64_t)rom;
+			data->next = (unsigned long)rom;
 		else
-			params->hdr.setup_data = (uint64_t)rom;
+			params->hdr.setup_data = (unsigned long)rom;
 
 		data = (struct setup_data *)rom;
 
@@ -432,10 +434,9 @@ static efi_status_t setup_gop(struct screen_info *si, efi_guid_t *proto,
 			 * Once we've found a GOP supporting ConOut,
 			 * don't bother looking any further.
 			 */
+			first_gop = gop;
 			if (conout_found)
 				break;
-
-			first_gop = gop;
 		}
 	}
 

arch/x86/boot/compressed/head_32.S

@@ -35,11 +35,11 @@ ENTRY(startup_32)
 #ifdef CONFIG_EFI_STUB
 	jmp	preferred_addr
 
-	.balign	0x10
 	/*
 	 * We don't need the return address, so set up the stack so
-	 * efi_main() can find its arugments.
+	 * efi_main() can find its arguments.
 	 */
+ENTRY(efi_pe_entry)
 	add	$0x4, %esp
 
 	call	make_boot_params
@@ -50,8 +50,10 @@ ENTRY(startup_32)
 	pushl	%eax
 	pushl	%esi
 	pushl	%ecx
+	sub	$0x4, %esp
 
-	.org 0x30,0x90
+ENTRY(efi_stub_entry)
+	add	$0x4, %esp
 	call	efi_main
 	cmpl	$0, %eax
 	movl	%eax, %esi

arch/x86/boot/compressed/head_64.S

@@ -201,12 +201,12 @@ ENTRY(startup_64)
 	 */
 #ifdef CONFIG_EFI_STUB
 	/*
-	 * The entry point for the PE/COFF executable is 0x210, so only
-	 * legacy boot loaders will execute this jmp.
+	 * The entry point for the PE/COFF executable is efi_pe_entry, so
+	 * only legacy boot loaders will execute this jmp.
 	 */
 	jmp	preferred_addr
 
-	.org 0x210
+ENTRY(efi_pe_entry)
 	mov	%rcx, %rdi
 	mov	%rdx, %rsi
 	pushq	%rdi
@@ -218,7 +218,7 @@ ENTRY(startup_64)
 	popq	%rsi
 	popq	%rdi
 
-	.org 0x230,0x90
+ENTRY(efi_stub_entry)
 	call	efi_main
 	movq	%rax,%rsi
 	cmpq	$0,%rax

arch/x86/boot/header.S

@@ -21,6 +21,7 @@
 #include <asm/e820.h>
 #include <asm/page_types.h>
 #include <asm/setup.h>
+#include <asm/bootparam.h>
 #include "boot.h"
 #include "voffset.h"
 #include "zoffset.h"
@@ -255,6 +256,9 @@ section_table:
 	# header, from the old boot sector.
 
 	.section ".header", "a"
+	.globl	sentinel
+sentinel:	.byte 0xff, 0xff        /* Used to detect broken loaders */
+
 	.globl	hdr
 hdr:
 setup_sects:	.byte 0			/* Filled in by build.c */
@@ -279,7 +283,7 @@ _start:
 	# Part 2 of the header, from the old setup.S
 
 		.ascii	"HdrS"		# header signature
-		.word	0x020b		# header version number (>= 0x0105)
+		.word	0x020c		# header version number (>= 0x0105)
 					# or else old loadlin-1.5 will fail)
 		.globl realmode_swtch
 realmode_swtch:	.word	0, 0		# default_switch, SETUPSEG
@@ -297,13 +301,7 @@ type_of_loader:	.byte	0		# 0 means ancient bootloader, newer
 
 # flags, unused bits must be zero (RFU) bit within loadflags
 loadflags:
-LOADED_HIGH	= 1			# If set, the kernel is loaded high
-CAN_USE_HEAP	= 0x80			# If set, the loader also has set
-					# heap_end_ptr to tell how much
-					# space behind setup.S can be used for
-					# heap purposes.
-					# Only the loader knows what is free
-		.byte	LOADED_HIGH
+		.byte	LOADED_HIGH	# The kernel is to be loaded high
 
 setup_move_size: .word  0x8000		# size to move, when setup is not
 					# loaded at 0x90000. We will move setup
@@ -369,7 +367,23 @@ relocatable_kernel:    .byte 1
 relocatable_kernel:    .byte 0
 #endif
 min_alignment:		.byte MIN_KERNEL_ALIGN_LG2	# minimum alignment
-pad3:			.word 0
+
+xloadflags:
+#ifdef CONFIG_X86_64
+# define XLF0 XLF_KERNEL_64			/* 64-bit kernel */
+#else
+# define XLF0 0
+#endif
+#ifdef CONFIG_EFI_STUB
+# ifdef CONFIG_X86_64
+#  define XLF23 XLF_EFI_HANDOVER_64		/* 64-bit EFI handover ok */
+# else
+#  define XLF23 XLF_EFI_HANDOVER_32		/* 32-bit EFI handover ok */
+# endif
+#else
+# define XLF23 0
+#endif
+			.word XLF0 | XLF23
 
 cmdline_size:   .long   COMMAND_LINE_SIZE-1     #length of the command line,
                                                 #added with boot protocol
@@ -397,8 +411,13 @@ pref_address:		.quad LOAD_PHYSICAL_ADDR	# preferred load addr
 #define INIT_SIZE VO_INIT_SIZE
 #endif
 init_size:		.long INIT_SIZE		# kernel initialization size
-handover_offset:	.long 0x30		# offset to the handover
+handover_offset:
+#ifdef CONFIG_EFI_STUB
+  			.long 0x30		# offset to the handover
 						# protocol entry point
+#else
+			.long 0
+#endif
 
 # End of setup header #####################################################
 

arch/x86/boot/setup.ld

@@ -13,7 +13,7 @@ SECTIONS
 	.bstext		: { *(.bstext) }
 	.bsdata		: { *(.bsdata) }
 
-	. = 497;
+	. = 495;
 	.header		: { *(.header) }
 	.entrytext	: { *(.entrytext) }
 	.inittext	: { *(.inittext) }

arch/x86/boot/tools/build.c

@@ -52,6 +52,10 @@ int is_big_kernel;
 
 #define PECOFF_RELOC_RESERVE 0x20
 
+unsigned long efi_stub_entry;
+unsigned long efi_pe_entry;
+unsigned long startup_64;
+
 /*----------------------------------------------------------------------*/
 
 static const u32 crctab32[] = {
@@ -132,7 +136,7 @@ static void die(const char * str, ...)
 
 static void usage(void)
 {
-	die("Usage: build setup system [> image]");
+	die("Usage: build setup system [zoffset.h] [> image]");
 }
 
 #ifdef CONFIG_EFI_STUB
@@ -206,30 +210,54 @@ static void update_pecoff_text(unsigned int text_start, unsigned int file_sz)
 	 */
 	put_unaligned_le32(file_sz - 512, &buf[pe_header + 0x1c]);
 
-#ifdef CONFIG_X86_32
 	/*
-	 * Address of entry point.
-	 *
-	 * The EFI stub entry point is +16 bytes from the start of
-	 * the .text section.
+	 * Address of entry point for PE/COFF executable
 	 */
-	put_unaligned_le32(text_start + 16, &buf[pe_header + 0x28]);
-#else
-	/*
-	 * Address of entry point. startup_32 is at the beginning and
-	 * the 64-bit entry point (startup_64) is always 512 bytes
-	 * after. The EFI stub entry point is 16 bytes after that, as
-	 * the first instruction allows legacy loaders to jump over
-	 * the EFI stub initialisation
-	 */
-	put_unaligned_le32(text_start + 528, &buf[pe_header + 0x28]);
-#endif /* CONFIG_X86_32 */
+	put_unaligned_le32(text_start + efi_pe_entry, &buf[pe_header + 0x28]);
 
 	update_pecoff_section_header(".text", text_start, text_sz);
 }
 
 #endif /* CONFIG_EFI_STUB */
 
+
+/*
+ * Parse zoffset.h and find the entry points. We could just #include zoffset.h
+ * but that would mean tools/build would have to be rebuilt every time. It's
+ * not as if parsing it is hard...
+ */
+#define PARSE_ZOFS(p, sym) do { \
+	if (!strncmp(p, "#define ZO_" #sym " ", 11+sizeof(#sym)))	\
+		sym = strtoul(p + 11 + sizeof(#sym), NULL, 16);		\
+} while (0)
+
+static void parse_zoffset(char *fname)
+{
+	FILE *file;
+	char *p;
+	int c;
+
+	file = fopen(fname, "r");
+	if (!file)
+		die("Unable to open `%s': %m", fname);
+	c = fread(buf, 1, sizeof(buf) - 1, file);
+	if (ferror(file))
+		die("read-error on `zoffset.h'");
+	buf[c] = 0;
+
+	p = (char *)buf;
+
+	while (p && *p) {
+		PARSE_ZOFS(p, efi_stub_entry);
+		PARSE_ZOFS(p, efi_pe_entry);
+		PARSE_ZOFS(p, startup_64);
+
+		p = strchr(p, '\n');
+		while (p && (*p == '\r' || *p == '\n'))
+			p++;
+	}
+}
+
 int main(int argc, char ** argv)
 {
 	unsigned int i, sz, setup_sectors;
@@ -241,7 +269,19 @@ int main(int argc, char ** argv)
 	void *kernel;
 	u32 crc = 0xffffffffUL;
 
-	if (argc != 3)
+	/* Defaults for old kernel */
+#ifdef CONFIG_X86_32
+	efi_pe_entry = 0x10;
+	efi_stub_entry = 0x30;
+#else
+	efi_pe_entry = 0x210;
+	efi_stub_entry = 0x230;
+	startup_64 = 0x200;
+#endif
+
+	if (argc == 4)
+		parse_zoffset(argv[3]);
+	else if (argc != 3)
 		usage();
 
 	/* Copy the setup code */
@@ -299,6 +339,11 @@ int main(int argc, char ** argv)
 
 #ifdef CONFIG_EFI_STUB
 	update_pecoff_text(setup_sectors * 512, sz + i + ((sys_size * 16) - sz));
+
+#ifdef CONFIG_X86_64 /* Yes, this is really how we defined it :( */
+	efi_stub_entry -= 0x200;
+#endif
+	put_unaligned_le32(efi_stub_entry, &buf[0x264]);
 #endif
 
 	crc = partial_crc32(buf, i, crc);

arch/x86/include/asm/efi.h

@@ -94,6 +94,7 @@ extern void __iomem *efi_ioremap(unsigned long addr, unsigned long size,
 #endif /* CONFIG_X86_32 */
 
 extern int add_efi_memmap;
+extern unsigned long x86_efi_facility;
 extern void efi_set_executable(efi_memory_desc_t *md, bool executable);
 extern int efi_memblock_x86_reserve_range(void);
 extern void efi_call_phys_prelog(void);

arch/x86/include/asm/uv/uv.h

@@ -16,7 +16,7 @@ extern void uv_system_init(void);
 extern const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask,
 						 struct mm_struct *mm,
 						 unsigned long start,
-						 unsigned end,
+						 unsigned long end,
 						 unsigned int cpu);
 
 #else	/* X86_UV */

arch/x86/include/uapi/asm/bootparam.h

@@ -1,6 +1,31 @@
 #ifndef _ASM_X86_BOOTPARAM_H
 #define _ASM_X86_BOOTPARAM_H
 
+/* setup_data types */
+#define SETUP_NONE			0
+#define SETUP_E820_EXT			1
+#define SETUP_DTB			2
+#define SETUP_PCI			3
+
+/* ram_size flags */
+#define RAMDISK_IMAGE_START_MASK	0x07FF
+#define RAMDISK_PROMPT_FLAG		0x8000
+#define RAMDISK_LOAD_FLAG		0x4000
+
+/* loadflags */
+#define LOADED_HIGH	(1<<0)
+#define QUIET_FLAG	(1<<5)
+#define KEEP_SEGMENTS	(1<<6)
+#define CAN_USE_HEAP	(1<<7)
+
+/* xloadflags */
+#define XLF_KERNEL_64			(1<<0)
+#define XLF_CAN_BE_LOADED_ABOVE_4G	(1<<1)
+#define XLF_EFI_HANDOVER_32		(1<<2)
+#define XLF_EFI_HANDOVER_64		(1<<3)
+
+#ifndef __ASSEMBLY__
+
 #include <linux/types.h>
 #include <linux/screen_info.h>
 #include <linux/apm_bios.h>
@@ -9,12 +34,6 @@
 #include <asm/ist.h>
 #include <video/edid.h>
 
-/* setup data types */
-#define SETUP_NONE			0
-#define SETUP_E820_EXT			1
-#define SETUP_DTB			2
-#define SETUP_PCI			3
-
 /* extensible setup data list node */
 struct setup_data {
 	__u64 next;
@@ -28,9 +47,6 @@ struct setup_header {
 	__u16	root_flags;
 	__u32	syssize;
 	__u16	ram_size;
-#define RAMDISK_IMAGE_START_MASK	0x07FF
-#define RAMDISK_PROMPT_FLAG		0x8000
-#define RAMDISK_LOAD_FLAG		0x4000
 	__u16	vid_mode;
 	__u16	root_dev;
 	__u16	boot_flag;
@@ -42,10 +58,6 @@ struct setup_header {
 	__u16	kernel_version;
 	__u8	type_of_loader;
 	__u8	loadflags;
-#define LOADED_HIGH	(1<<0)
-#define QUIET_FLAG	(1<<5)
-#define KEEP_SEGMENTS	(1<<6)
-#define CAN_USE_HEAP	(1<<7)
 	__u16	setup_move_size;
 	__u32	code32_start;
 	__u32	ramdisk_image;
@@ -58,7 +70,8 @@ struct setup_header {
 	__u32	initrd_addr_max;
 	__u32	kernel_alignment;
 	__u8	relocatable_kernel;
-	__u8	_pad2[3];
+	__u8	min_alignment;
+	__u16	xloadflags;
 	__u32	cmdline_size;
 	__u32	hardware_subarch;
 	__u64	hardware_subarch_data;
@@ -106,7 +119,10 @@ struct boot_params {
 	__u8  hd1_info[16];	/* obsolete! */		/* 0x090 */
 	struct sys_desc_table sys_desc_table;		/* 0x0a0 */
 	struct olpc_ofw_header olpc_ofw_header;		/* 0x0b0 */
-	__u8  _pad4[128];				/* 0x0c0 */
+	__u32 ext_ramdisk_image;			/* 0x0c0 */
+	__u32 ext_ramdisk_size;				/* 0x0c4 */
+	__u32 ext_cmd_line_ptr;				/* 0x0c8 */
+	__u8  _pad4[116];				/* 0x0cc */
 	struct edid_info edid_info;			/* 0x140 */
 	struct efi_info efi_info;			/* 0x1c0 */
 	__u32 alt_mem_k;				/* 0x1e0 */
@@ -115,7 +131,20 @@ struct boot_params {
 	__u8  eddbuf_entries;				/* 0x1e9 */
 	__u8  edd_mbr_sig_buf_entries;			/* 0x1ea */
 	__u8  kbd_status;				/* 0x1eb */
-	__u8  _pad6[5];					/* 0x1ec */
+	__u8  _pad5[3];					/* 0x1ec */
+	/*
+	 * The sentinel is set to a nonzero value (0xff) in header.S.
+	 *
+	 * A bootloader is supposed to only take setup_header and put
+	 * it into a clean boot_params buffer. If it turns out that
+	 * it is clumsy or too generous with the buffer, it most
+	 * probably will pick up the sentinel variable too. The fact
+	 * that this variable then is still 0xff will let kernel
+	 * know that some variables in boot_params are invalid and
+	 * kernel should zero out certain portions of boot_params.
+	 */
+	__u8  sentinel;					/* 0x1ef */
+	__u8  _pad6[1];					/* 0x1f0 */
 	struct setup_header hdr;    /* setup header */	/* 0x1f1 */
 	__u8  _pad7[0x290-0x1f1-sizeof(struct setup_header)];
 	__u32 edd_mbr_sig_buffer[EDD_MBR_SIG_MAX];	/* 0x290 */
@@ -134,6 +163,6 @@ enum {
 	X86_NR_SUBARCHS,
 };
 
-
+#endif /* __ASSEMBLY__ */
 
 #endif /* _ASM_X86_BOOTPARAM_H */

arch/x86/kernel/entry_64.S

@@ -1781,6 +1781,7 @@ first_nmi:
 	 * Leave room for the "copied" frame
 	 */
 	subq $(5*8), %rsp
+	CFI_ADJUST_CFA_OFFSET 5*8
 
 	/* Copy the stack frame to the Saved frame */
 	.rept 5
@@ -1863,10 +1864,8 @@ end_repeat_nmi:
 nmi_swapgs:
 	SWAPGS_UNSAFE_STACK
 nmi_restore:
-	RESTORE_ALL 8
-
-	/* Pop the extra iret frame */
-	addq $(5*8), %rsp
+	/* Pop the extra iret frame at once */
+	RESTORE_ALL 6*8
 
 	/* Clear the NMI executing stack variable */
 	movq $0, 5*8(%rsp)

arch/x86/kernel/head_32.S

@@ -300,6 +300,12 @@ ENTRY(startup_32_smp)
 	leal -__PAGE_OFFSET(%ecx),%esp
 
 default_entry:
+#define CR0_STATE	(X86_CR0_PE | X86_CR0_MP | X86_CR0_ET | \
+			 X86_CR0_NE | X86_CR0_WP | X86_CR0_AM | \
+			 X86_CR0_PG)
+	movl $(CR0_STATE & ~X86_CR0_PG),%eax
+	movl %eax,%cr0
+
 /*
  *	New page tables may be in 4Mbyte page mode and may
  *	be using the global pages. 
@@ -364,8 +370,7 @@ default_entry:
  */
 	movl $pa(initial_page_table), %eax
 	movl %eax,%cr3		/* set the page table pointer.. */
-	movl %cr0,%eax
-	orl  $X86_CR0_PG,%eax
+	movl $CR0_STATE,%eax
 	movl %eax,%cr0		/* ..and set paging (PG) bit */
 	ljmp $__BOOT_CS,$1f	/* Clear prefetch and normalize %eip */
 1:

arch/x86/kernel/msr.c

@@ -174,6 +174,9 @@ static int msr_open(struct inode *inode, struct file *file)
 	unsigned int cpu;
 	struct cpuinfo_x86 *c;
 
+	if (!capable(CAP_SYS_RAWIO))
+		return -EPERM;
+
 	cpu = iminor(file->f_path.dentry->d_inode);
 	if (cpu >= nr_cpu_ids || !cpu_online(cpu))
 		return -ENXIO;	/* No such CPU */

arch/x86/kernel/pci-dma.c

@@ -56,7 +56,7 @@ struct device x86_dma_fallback_dev = {
 EXPORT_SYMBOL(x86_dma_fallback_dev);
 
 /* Number of entries preallocated for DMA-API debugging */
-#define PREALLOC_DMA_DEBUG_ENTRIES       32768
+#define PREALLOC_DMA_DEBUG_ENTRIES       65536
 
 int dma_set_mask(struct device *dev, u64 mask)
 {

arch/x86/kernel/reboot.c

@@ -584,7 +584,7 @@ static void native_machine_emergency_restart(void)
 			break;
 
 		case BOOT_EFI:
-			if (efi_enabled)
+			if (efi_enabled(EFI_RUNTIME_SERVICES))
 				efi.reset_system(reboot_mode ?
 						 EFI_RESET_WARM :
 						 EFI_RESET_COLD,

arch/x86/kernel/setup.c

@@ -807,15 +807,15 @@ void __init setup_arch(char **cmdline_p)
 #ifdef CONFIG_EFI
 	if (!strncmp((char *)&boot_params.efi_info.efi_loader_signature,
 		     "EL32", 4)) {
-		efi_enabled = 1;
-		efi_64bit = false;
+		set_bit(EFI_BOOT, &x86_efi_facility);
 	} else if (!strncmp((char *)&boot_params.efi_info.efi_loader_signature,
 		     "EL64", 4)) {
-		efi_enabled = 1;
-		efi_64bit = true;
+		set_bit(EFI_BOOT, &x86_efi_facility);
+		set_bit(EFI_64BIT, &x86_efi_facility);
 	}
-	if (efi_enabled && efi_memblock_x86_reserve_range())
-		efi_enabled = 0;
+
+	if (efi_enabled(EFI_BOOT))
+		efi_memblock_x86_reserve_range();
 #endif
 
 	x86_init.oem.arch_setup();
@@ -888,7 +888,7 @@ void __init setup_arch(char **cmdline_p)
 
 	finish_e820_parsing();
 
-	if (efi_enabled)
+	if (efi_enabled(EFI_BOOT))
 		efi_init();
 
 	dmi_scan_machine();
@@ -971,7 +971,7 @@ void __init setup_arch(char **cmdline_p)
 	 * The EFI specification says that boot service code won't be called
 	 * after ExitBootServices(). This is, in fact, a lie.
 	 */
-	if (efi_enabled)
+	if (efi_enabled(EFI_MEMMAP))
 		efi_reserve_boot_services();
 
 	/* preallocate 4k for mptable mpc */
@@ -1114,7 +1114,7 @@ void __init setup_arch(char **cmdline_p)
 
 #ifdef CONFIG_VT
 #if defined(CONFIG_VGA_CONSOLE)
-	if (!efi_enabled || (efi_mem_type(0xa0000) != EFI_CONVENTIONAL_MEMORY))
+	if (!efi_enabled(EFI_BOOT) || (efi_mem_type(0xa0000) != EFI_CONVENTIONAL_MEMORY))
 		conswitchp = &vga_con;
 #elif defined(CONFIG_DUMMY_CONSOLE)
 	conswitchp = &dummy_con;
@@ -1131,14 +1131,14 @@ void __init setup_arch(char **cmdline_p)
 	register_refined_jiffies(CLOCK_TICK_RATE);
 
 #ifdef CONFIG_EFI
-	/* Once setup is done above, disable efi_enabled on mismatched
-	 * firmware/kernel archtectures since there is no support for
-	 * runtime services.
+	/* Once setup is done above, unmap the EFI memory map on
+	 * mismatched firmware/kernel archtectures since there is no
+	 * support for runtime services.
 	 */
-	if (efi_enabled && IS_ENABLED(CONFIG_X86_64) != efi_64bit) {
+	if (efi_enabled(EFI_BOOT) &&
+	    IS_ENABLED(CONFIG_X86_64) != efi_enabled(EFI_64BIT)) {
 		pr_info("efi: Setup done, disabling due to 32/64-bit mismatch\n");
 		efi_unmap_memmap();
-		efi_enabled = 0;
 	}
 #endif
 }

arch/x86/platform/efi/efi.c

@@ -51,9 +51,6 @@
 
 #define EFI_DEBUG	1
 
-int efi_enabled;
-EXPORT_SYMBOL(efi_enabled);
-
 struct efi __read_mostly efi = {
 	.mps        = EFI_INVALID_TABLE_ADDR,
 	.acpi       = EFI_INVALID_TABLE_ADDR,
@@ -69,19 +66,28 @@ EXPORT_SYMBOL(efi);
 
 struct efi_memory_map memmap;
 
-bool efi_64bit;
-
 static struct efi efi_phys __initdata;
 static efi_system_table_t efi_systab __initdata;
 
 static inline bool efi_is_native(void)
 {
-	return IS_ENABLED(CONFIG_X86_64) == efi_64bit;
+	return IS_ENABLED(CONFIG_X86_64) == efi_enabled(EFI_64BIT);
+}
+
+unsigned long x86_efi_facility;
+
+/*
+ * Returns 1 if 'facility' is enabled, 0 otherwise.
+ */
+int efi_enabled(int facility)
+{
+	return test_bit(facility, &x86_efi_facility) != 0;
 }
+EXPORT_SYMBOL(efi_enabled);
 
 static int __init setup_noefi(char *arg)
 {
-	efi_enabled = 0;
+	clear_bit(EFI_BOOT, &x86_efi_facility);
 	return 0;
 }
 early_param("noefi", setup_noefi);
@@ -426,6 +432,7 @@ void __init efi_reserve_boot_services(void)
 
 void __init efi_unmap_memmap(void)
 {
+	clear_bit(EFI_MEMMAP, &x86_efi_facility);
 	if (memmap.map) {
 		early_iounmap(memmap.map, memmap.nr_map * memmap.desc_size);
 		memmap.map = NULL;
@@ -460,7 +467,7 @@ void __init efi_free_boot_services(void)
 
 static int __init efi_systab_init(void *phys)
 {
-	if (efi_64bit) {
+	if (efi_enabled(EFI_64BIT)) {
 		efi_system_table_64_t *systab64;
 		u64 tmp = 0;
 
@@ -552,7 +559,7 @@ static int __init efi_config_init(u64 tables, int nr_tables)
 	void *config_tables, *tablep;
 	int i, sz;
 
-	if (efi_64bit)
+	if (efi_enabled(EFI_64BIT))
 		sz = sizeof(efi_config_table_64_t);
 	else
 		sz = sizeof(efi_config_table_32_t);
@@ -572,7 +579,7 @@ static int __init efi_config_init(u64 tables, int nr_tables)
 		efi_guid_t guid;
 		unsigned long table;
 
-		if (efi_64bit) {
+		if (efi_enabled(EFI_64BIT)) {
 			u64 table64;
 			guid = ((efi_config_table_64_t *)tablep)->guid;
 			table64 = ((efi_config_table_64_t *)tablep)->table;
@@ -684,7 +691,6 @@ void __init efi_init(void)
 	if (boot_params.efi_info.efi_systab_hi ||
 	    boot_params.efi_info.efi_memmap_hi) {
 		pr_info("Table located above 4GB, disabling EFI.\n");
-		efi_enabled = 0;
 		return;
 	}
 	efi_phys.systab = (efi_system_table_t *)boot_params.efi_info.efi_systab;
@@ -694,10 +700,10 @@ void __init efi_init(void)
 			  ((__u64)boot_params.efi_info.efi_systab_hi<<32));
 #endif
 
-	if (efi_systab_init(efi_phys.systab)) {
-		efi_enabled = 0;
+	if (efi_systab_init(efi_phys.systab))
 		return;
-	}
+
+	set_bit(EFI_SYSTEM_TABLES, &x86_efi_facility);
 
 	/*
 	 * Show what we know for posterity
@@ -715,10 +721,10 @@ void __init efi_init(void)
 		efi.systab->hdr.revision >> 16,
 		efi.systab->hdr.revision & 0xffff, vendor);
 
-	if (efi_config_init(efi.systab->tables, efi.systab->nr_tables)) {
-		efi_enabled = 0;
+	if (efi_config_init(efi.systab->tables, efi.systab->nr_tables))
 		return;
-	}
+
+	set_bit(EFI_CONFIG_TABLES, &x86_efi_facility);
 
 	/*
 	 * Note: We currently don't support runtime services on an EFI
@@ -727,15 +733,17 @@ void __init efi_init(void)
 
 	if (!efi_is_native())
 		pr_info("No EFI runtime due to 32/64-bit mismatch with kernel\n");
-	else if (efi_runtime_init()) {
-		efi_enabled = 0;
-		return;
+	else {
+		if (efi_runtime_init())
+			return;
+		set_bit(EFI_RUNTIME_SERVICES, &x86_efi_facility);
 	}
 
-	if (efi_memmap_init()) {
-		efi_enabled = 0;
+	if (efi_memmap_init())
 		return;
-	}
+
+	set_bit(EFI_MEMMAP, &x86_efi_facility);
+
 #ifdef CONFIG_X86_32
 	if (efi_is_native()) {
 		x86_platform.get_wallclock = efi_get_time;
@@ -941,7 +949,7 @@ void __init efi_enter_virtual_mode(void)
 	 *
 	 * Call EFI services through wrapper functions.
 	 */
-	efi.runtime_version = efi_systab.fw_revision;
+	efi.runtime_version = efi_systab.hdr.revision;
 	efi.get_time = virt_efi_get_time;
 	efi.set_time = virt_efi_set_time;
 	efi.get_wakeup_time = virt_efi_get_wakeup_time;
@@ -969,6 +977,9 @@ u32 efi_mem_type(unsigned long phys_addr)
 	efi_memory_desc_t *md;
 	void *p;
 
+	if (!efi_enabled(EFI_MEMMAP))
+		return 0;
+
 	for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) {
 		md = p;
 		if ((md->phys_addr <= phys_addr) &&

arch/x86/platform/efi/efi_64.c

@@ -38,7 +38,7 @@
 #include <asm/cacheflush.h>
 #include <asm/fixmap.h>
 
-static pgd_t save_pgd __initdata;
+static pgd_t *save_pgd __initdata;
 static unsigned long efi_flags __initdata;
 
 static void __init early_code_mapping_set_exec(int executable)
@@ -61,12 +61,20 @@ static void __init early_code_mapping_set_exec(int executable)
 void __init efi_call_phys_prelog(void)
 {
 	unsigned long vaddress;
+	int pgd;
+	int n_pgds;
 
 	early_code_mapping_set_exec(1);
 	local_irq_save(efi_flags);
-	vaddress = (unsigned long)__va(0x0UL);
-	save_pgd = *pgd_offset_k(0x0UL);
-	set_pgd(pgd_offset_k(0x0UL), *pgd_offset_k(vaddress));
+
+	n_pgds = DIV_ROUND_UP((max_pfn << PAGE_SHIFT), PGDIR_SIZE);
+	save_pgd = kmalloc(n_pgds * sizeof(pgd_t), GFP_KERNEL);
+
+	for (pgd = 0; pgd < n_pgds; pgd++) {
+		save_pgd[pgd] = *pgd_offset_k(pgd * PGDIR_SIZE);
+		vaddress = (unsigned long)__va(pgd * PGDIR_SIZE);
+		set_pgd(pgd_offset_k(pgd * PGDIR_SIZE), *pgd_offset_k(vaddress));
+	}
 	__flush_tlb_all();
 }
 
@@ -75,7 +83,11 @@ void __init efi_call_phys_epilog(void)
 	/*
 	 * After the lock is released, the original page table is restored.
 	 */
-	set_pgd(pgd_offset_k(0x0UL), save_pgd);
+	int pgd;
+	int n_pgds = DIV_ROUND_UP((max_pfn << PAGE_SHIFT) , PGDIR_SIZE);
+	for (pgd = 0; pgd < n_pgds; pgd++)
+		set_pgd(pgd_offset_k(pgd * PGDIR_SIZE), save_pgd[pgd]);
+	kfree(save_pgd);
 	__flush_tlb_all();
 	local_irq_restore(efi_flags);
 	early_code_mapping_set_exec(0);

arch/x86/platform/uv/tlb_uv.c

@@ -1034,7 +1034,8 @@ static int set_distrib_bits(struct cpumask *flush_mask, struct bau_control *bcp,
  * globally purge translation cache of a virtual address or all TLB's
  * @cpumask: mask of all cpu's in which the address is to be removed
  * @mm: mm_struct containing virtual address range
- * @va: virtual address to be removed (or TLB_FLUSH_ALL for all TLB's on cpu)
+ * @start: start virtual address to be removed from TLB
+ * @end: end virtual address to be remove from TLB
  * @cpu: the current cpu
  *
  * This is the entry point for initiating any UV global TLB shootdown.
@@ -1056,7 +1057,7 @@ static int set_distrib_bits(struct cpumask *flush_mask, struct bau_control *bcp,
  */
 const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask,
 				struct mm_struct *mm, unsigned long start,
-				unsigned end, unsigned int cpu)
+				unsigned long end, unsigned int cpu)
 {
 	int locals = 0;
 	int remotes = 0;
@@ -1113,7 +1114,10 @@ const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask,
 
 	record_send_statistics(stat, locals, hubs, remotes, bau_desc);
 
-	bau_desc->payload.address = start;
+	if (!end || (end - start) <= PAGE_SIZE)
+		bau_desc->payload.address = start;
+	else
+		bau_desc->payload.address = TLB_FLUSH_ALL;
 	bau_desc->payload.sending_cpu = cpu;
 	/*
 	 * uv_flush_send_and_wait returns 0 if all cpu's were messaged,

arch/x86/tools/relocs.c

@@ -814,12 +814,14 @@ int main(int argc, char **argv)
 	read_relocs(fp);
 	if (show_absolute_syms) {
 		print_absolute_symbols();
-		return 0;
+		goto out;
 	}
 	if (show_absolute_relocs) {
 		print_absolute_relocs();
-		return 0;
+		goto out;
 	}
 	emit_relocs(as_text, use_real_mode);
+out:
+	fclose(fp);
 	return 0;
 }

drivers/acpi/osl.c

@@ -250,7 +250,7 @@ acpi_physical_address __init acpi_os_get_root_pointer(void)
 		return acpi_rsdp;
 #endif
 
-	if (efi_enabled) {
+	if (efi_enabled(EFI_CONFIG_TABLES)) {
 		if (efi.acpi20 != EFI_INVALID_TABLE_ADDR)
 			return efi.acpi20;
 		else if (efi.acpi != EFI_INVALID_TABLE_ADDR)

drivers/bluetooth/ath3k.c

@@ -77,10 +77,15 @@ static struct usb_device_id ath3k_table[] = {
 	{ USB_DEVICE(0x0CF3, 0x311D) },
 	{ USB_DEVICE(0x13d3, 0x3375) },
 	{ USB_DEVICE(0x04CA, 0x3005) },
+	{ USB_DEVICE(0x04CA, 0x3006) },
+	{ USB_DEVICE(0x04CA, 0x3008) },
 	{ USB_DEVICE(0x13d3, 0x3362) },
 	{ USB_DEVICE(0x0CF3, 0xE004) },
 	{ USB_DEVICE(0x0930, 0x0219) },
 	{ USB_DEVICE(0x0489, 0xe057) },
+	{ USB_DEVICE(0x13d3, 0x3393) },
+	{ USB_DEVICE(0x0489, 0xe04e) },
+	{ USB_DEVICE(0x0489, 0xe056) },
 
 	/* Atheros AR5BBU12 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xE02C) },
@@ -104,10 +109,15 @@ static struct usb_device_id ath3k_blist_tbl[] = {
 	{ USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU22 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },

drivers/bluetooth/btusb.c

@@ -135,10 +135,15 @@ static struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU12 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },

drivers/edac/edac_mc.c

@@ -340,7 +340,7 @@ struct mem_ctl_info *edac_mc_alloc(unsigned mc_num,
 	/*
 	 * Alocate and fill the csrow/channels structs
 	 */
-	mci->csrows = kcalloc(sizeof(*mci->csrows), tot_csrows, GFP_KERNEL);
+	mci->csrows = kcalloc(tot_csrows, sizeof(*mci->csrows), GFP_KERNEL);
 	if (!mci->csrows)
 		goto error;
 	for (row = 0; row < tot_csrows; row++) {
@@ -351,7 +351,7 @@ struct mem_ctl_info *edac_mc_alloc(unsigned mc_num,
 		csr->csrow_idx = row;
 		csr->mci = mci;
 		csr->nr_channels = tot_channels;
-		csr->channels = kcalloc(sizeof(*csr->channels), tot_channels,
+		csr->channels = kcalloc(tot_channels, sizeof(*csr->channels),
 					GFP_KERNEL);
 		if (!csr->channels)
 			goto error;
@@ -369,7 +369,7 @@ struct mem_ctl_info *edac_mc_alloc(unsigned mc_num,
 	/*
 	 * Allocate and fill the dimm structs
 	 */
-	mci->dimms  = kcalloc(sizeof(*mci->dimms), tot_dimms, GFP_KERNEL);
+	mci->dimms  = kcalloc(tot_dimms, sizeof(*mci->dimms), GFP_KERNEL);
 	if (!mci->dimms)
 		goto error;
 

drivers/edac/edac_pci_sysfs.c

@@ -256,7 +256,7 @@ static ssize_t edac_pci_dev_store(struct kobject *kobj,
 	struct edac_pci_dev_attribute *edac_pci_dev;
 	edac_pci_dev = (struct edac_pci_dev_attribute *)attr;
 
-	if (edac_pci_dev->show)
+	if (edac_pci_dev->store)
 		return edac_pci_dev->store(edac_pci_dev->value, buffer, count);
 	return -EIO;
 }

drivers/firmware/dmi_scan.c

@@ -471,7 +471,7 @@ void __init dmi_scan_machine(void)
 	char __iomem *p, *q;
 	int rc;
 
-	if (efi_enabled) {
+	if (efi_enabled(EFI_CONFIG_TABLES)) {
 		if (efi.smbios == EFI_INVALID_TABLE_ADDR)
 			goto error;
 

drivers/firmware/efivars.c

@@ -674,7 +674,7 @@ static int efi_status_to_err(efi_status_t status)
 		err = -EACCES;
 		break;
 	case EFI_NOT_FOUND:
-		err = -ENOENT;
+		err = -EIO;
 		break;
 	default:
 		err = -EINVAL;
@@ -793,6 +793,7 @@ static ssize_t efivarfs_file_write(struct file *file,
 		spin_unlock(&efivars->lock);
 		efivar_unregister(var);
 		drop_nlink(inode);
+		d_delete(file->f_dentry);
 		dput(file->f_dentry);
 
 	} else {
@@ -994,7 +995,7 @@ static int efivarfs_unlink(struct inode *dir, struct dentry *dentry)
 		list_del(&var->list);
 		spin_unlock(&efivars->lock);
 		efivar_unregister(var);
-		drop_nlink(dir);
+		drop_nlink(dentry->d_inode);
 		dput(dentry);
 		return 0;
 	}
@@ -1782,7 +1783,7 @@ efivars_init(void)
 	printk(KERN_INFO "EFI Variables Facility v%s %s\n", EFIVARS_VERSION,
 	       EFIVARS_DATE);
 
-	if (!efi_enabled)
+	if (!efi_enabled(EFI_RUNTIME_SERVICES))
 		return 0;
 
 	/* For now we'll register the efi directory at /sys/firmware/efi */
@@ -1822,7 +1823,7 @@ err_put:
 static void __exit
 efivars_exit(void)
 {
-	if (efi_enabled) {
+	if (efi_enabled(EFI_RUNTIME_SERVICES)) {
 		unregister_efivars(&__efivars);
 		kobject_put(efi_kobj);
 	}

drivers/firmware/iscsi_ibft_find.c

@@ -99,7 +99,7 @@ unsigned long __init find_ibft_region(unsigned long *sizep)
 	/* iBFT 1.03 section 1.4.3.1 mandates that UEFI machines will
 	 * only use ACPI for this */
 
-	if (!efi_enabled)
+	if (!efi_enabled(EFI_BOOT))
 		find_ibft_in_mem();
 
 	if (ibft_addr) {

drivers/gpu/drm/exynos/Kconfig

@@ -24,7 +24,7 @@ config DRM_EXYNOS_DMABUF
 
 config DRM_EXYNOS_FIMD
 	bool "Exynos DRM FIMD"
-	depends on DRM_EXYNOS && !FB_S3C
+	depends on DRM_EXYNOS && !FB_S3C && !ARCH_MULTIPLATFORM
 	help
 	  Choose this option if you want to use Exynos FIMD for DRM.
 
@@ -48,7 +48,7 @@ config DRM_EXYNOS_G2D
 
 config DRM_EXYNOS_IPP
 	bool "Exynos DRM IPP"
-	depends on DRM_EXYNOS
+	depends on DRM_EXYNOS && !ARCH_MULTIPLATFORM
 	help
 	  Choose this option if you want to use IPP feature for DRM.
 

drivers/gpu/drm/exynos/exynos_drm_connector.c

@@ -18,7 +18,6 @@
 #include "exynos_drm_drv.h"
 #include "exynos_drm_encoder.h"
 
-#define MAX_EDID 256
 #define to_exynos_connector(x)	container_of(x, struct exynos_drm_connector,\
 				drm_connector)
 
@@ -96,7 +95,9 @@ static int exynos_drm_connector_get_modes(struct drm_connector *connector)
 					to_exynos_connector(connector);
 	struct exynos_drm_manager *manager = exynos_connector->manager;
 	struct exynos_drm_display_ops *display_ops = manager->display_ops;
-	unsigned int count;
+	struct edid *edid = NULL;
+	unsigned int count = 0;
+	int ret;
 
 	DRM_DEBUG_KMS("%s\n", __FILE__);
 
@@ -114,27 +115,21 @@ static int exynos_drm_connector_get_modes(struct drm_connector *connector)
 	 * because lcd panel has only one mode.
 	 */
 	if (display_ops->get_edid) {
-		int ret;
-		void *edid;
-
-		edid = kzalloc(MAX_EDID, GFP_KERNEL);
-		if (!edid) {
-			DRM_ERROR("failed to allocate edid\n");
-			return 0;
+		edid = display_ops->get_edid(manager->dev, connector);
+		if (IS_ERR_OR_NULL(edid)) {
+			ret = PTR_ERR(edid);
+			edid = NULL;
+			DRM_ERROR("Panel operation get_edid failed %d\n", ret);
+			goto out;
 		}
 
-		ret = display_ops->get_edid(manager->dev, connector,
-						edid, MAX_EDID);
-		if (ret < 0) {
-			DRM_ERROR("failed to get edid data.\n");
-			kfree(edid);
-			edid = NULL;
-			return 0;
+		count = drm_add_edid_modes(connector, edid);
+		if (count < 0) {
+			DRM_ERROR("Add edid modes failed %d\n", count);
+			goto out;
 		}
 
 		drm_mode_connector_update_edid_property(connector, edid);
-		count = drm_add_edid_modes(connector, edid);
-		kfree(edid);
 	} else {
 		struct exynos_drm_panel_info *panel;
 		struct drm_display_mode *mode = drm_mode_create(connector->dev);
@@ -161,6 +156,8 @@ static int exynos_drm_connector_get_modes(struct drm_connector *connector)
 		count = 1;
 	}
 
+out:
+	kfree(edid);
 	return count;
 }
 

drivers/gpu/drm/exynos/exynos_drm_dmabuf.c

@@ -19,6 +19,7 @@
 struct exynos_drm_dmabuf_attachment {
 	struct sg_table sgt;
 	enum dma_data_direction dir;
+	bool is_mapped;
 };
 
 static int exynos_gem_attach_dma_buf(struct dma_buf *dmabuf,
@@ -72,17 +73,10 @@ static struct sg_table *
 
 	DRM_DEBUG_PRIME("%s\n", __FILE__);
 
-	if (WARN_ON(dir == DMA_NONE))
-		return ERR_PTR(-EINVAL);
-
 	/* just return current sgt if already requested. */
-	if (exynos_attach->dir == dir)
+	if (exynos_attach->dir == dir && exynos_attach->is_mapped)
 		return &exynos_attach->sgt;
 
-	/* reattaching is not allowed. */
-	if (WARN_ON(exynos_attach->dir != DMA_NONE))
-		return ERR_PTR(-EBUSY);
-
 	buf = gem_obj->buffer;
 	if (!buf) {
 		DRM_ERROR("buffer is null.\n");
@@ -107,13 +101,17 @@ static struct sg_table *
 		wr = sg_next(wr);
 	}
 
-	nents = dma_map_sg(attach->dev, sgt->sgl, sgt->orig_nents, dir);
-	if (!nents) {
-		DRM_ERROR("failed to map sgl with iommu.\n");
-		sgt = ERR_PTR(-EIO);
-		goto err_unlock;
+	if (dir != DMA_NONE) {
+		nents = dma_map_sg(attach->dev, sgt->sgl, sgt->orig_nents, dir);
+		if (!nents) {
+			DRM_ERROR("failed to map sgl with iommu.\n");
+			sg_free_table(sgt);
+			sgt = ERR_PTR(-EIO);
+			goto err_unlock;
+		}
 	}
 
+	exynos_attach->is_mapped = true;
 	exynos_attach->dir = dir;
 	attach->priv = exynos_attach;
 

drivers/gpu/drm/exynos/exynos_drm_drv.h

@@ -148,8 +148,8 @@ struct exynos_drm_overlay {
 struct exynos_drm_display_ops {
 	enum exynos_drm_output_type type;
 	bool (*is_connected)(struct device *dev);
-	int (*get_edid)(struct device *dev, struct drm_connector *connector,
-				u8 *edid, int len);
+	struct edid *(*get_edid)(struct device *dev,
+			struct drm_connector *connector);
 	void *(*get_panel)(struct device *dev);
 	int (*check_timing)(struct device *dev, void *timing);
 	int (*power_on)(struct device *dev, int mode);

drivers/gpu/drm/exynos/exynos_drm_g2d.c

@@ -324,7 +324,7 @@ out:
 	g2d_userptr = NULL;
 }
 
-dma_addr_t *g2d_userptr_get_dma_addr(struct drm_device *drm_dev,
+static dma_addr_t *g2d_userptr_get_dma_addr(struct drm_device *drm_dev,
 					unsigned long userptr,
 					unsigned long size,
 					struct drm_file *filp,

drivers/gpu/drm/exynos/exynos_drm_hdmi.c

@@ -108,18 +108,17 @@ static bool drm_hdmi_is_connected(struct device *dev)
 	return false;
 }
 
-static int drm_hdmi_get_edid(struct device *dev,
-		struct drm_connector *connector, u8 *edid, int len)
+static struct edid *drm_hdmi_get_edid(struct device *dev,
+			struct drm_connector *connector)
 {
 	struct drm_hdmi_context *ctx = to_context(dev);
 
 	DRM_DEBUG_KMS("%s\n", __FILE__);
 
 	if (hdmi_ops && hdmi_ops->get_edid)
-		return hdmi_ops->get_edid(ctx->hdmi_ctx->ctx, connector, edid,
-					  len);
+		return hdmi_ops->get_edid(ctx->hdmi_ctx->ctx, connector);
 
-	return 0;
+	return NULL;
 }
 
 static int drm_hdmi_check_timing(struct device *dev, void *timing)

drivers/gpu/drm/exynos/exynos_drm_hdmi.h

@@ -30,8 +30,8 @@ struct exynos_drm_hdmi_context {
 struct exynos_hdmi_ops {
 	/* display */
 	bool (*is_connected)(void *ctx);
-	int (*get_edid)(void *ctx, struct drm_connector *connector,
-			u8 *edid, int len);
+	struct edid *(*get_edid)(void *ctx,
+			struct drm_connector *connector);
 	int (*check_timing)(void *ctx, void *timing);
 	int (*power_on)(void *ctx, int mode);
 

drivers/gpu/drm/exynos/exynos_drm_ipp.c

@@ -869,7 +869,7 @@ static void ipp_put_event(struct drm_exynos_ipp_cmd_node *c_node,
 	}
 }
 
-void ipp_handle_cmd_work(struct device *dev,
+static void ipp_handle_cmd_work(struct device *dev,
 		struct exynos_drm_ippdrv *ippdrv,
 		struct drm_exynos_ipp_cmd_work *cmd_work,
 		struct drm_exynos_ipp_cmd_node *c_node)

drivers/gpu/drm/exynos/exynos_drm_rotator.c

@@ -734,7 +734,7 @@ static int rotator_remove(struct platform_device *pdev)
 	return 0;
 }
 
-struct rot_limit_table rot_limit_tbl = {
+static struct rot_limit_table rot_limit_tbl = {
 	.ycbcr420_2p = {
 		.min_w = 32,
 		.min_h = 32,
@@ -751,7 +751,7 @@ struct rot_limit_table rot_limit_tbl = {
 	},
 };
 
-struct platform_device_id rotator_driver_ids[] = {
+static struct platform_device_id rotator_driver_ids[] = {
 	{
 		.name		= "exynos-rot",
 		.driver_data	= (unsigned long)&rot_limit_tbl,

drivers/gpu/drm/exynos/exynos_drm_vidi.c

@@ -98,10 +98,12 @@ static bool vidi_display_is_connected(struct device *dev)
 	return ctx->connected ? true : false;
 }
 
-static int vidi_get_edid(struct device *dev, struct drm_connector *connector,
-				u8 *edid, int len)
+static struct edid *vidi_get_edid(struct device *dev,
+			struct drm_connector *connector)
 {
 	struct vidi_context *ctx = get_vidi_context(dev);
+	struct edid *edid;
+	int edid_len;
 
 	DRM_DEBUG_KMS("%s\n", __FILE__);
 
@@ -111,13 +113,18 @@ static int vidi_get_edid(struct device *dev, struct drm_connector *connector,
 	 */
 	if (!ctx->raw_edid) {
 		DRM_DEBUG_KMS("raw_edid is null.\n");
-		return -EFAULT;
+		return ERR_PTR(-EFAULT);
 	}
 
-	memcpy(edid, ctx->raw_edid, min((1 + ctx->raw_edid->extensions)
-					* EDID_LENGTH, len));
+	edid_len = (1 + ctx->raw_edid->extensions) * EDID_LENGTH;
+	edid = kzalloc(edid_len, GFP_KERNEL);
+	if (!edid) {
+		DRM_DEBUG_KMS("failed to allocate edid\n");
+		return ERR_PTR(-ENOMEM);
+	}
 
-	return 0;
+	memcpy(edid, ctx->raw_edid, edid_len);
+	return edid;
 }
 
 static void *vidi_get_panel(struct device *dev)
@@ -514,7 +521,6 @@ int vidi_connection_ioctl(struct drm_device *drm_dev, void *data,
 	struct exynos_drm_manager *manager;
 	struct exynos_drm_display_ops *display_ops;
 	struct drm_exynos_vidi_connection *vidi = data;
-	struct edid *raw_edid;
 	int edid_len;
 
 	DRM_DEBUG_KMS("%s\n", __FILE__);
@@ -551,11 +557,11 @@ int vidi_connection_ioctl(struct drm_device *drm_dev, void *data,
 	}
 
 	if (vidi->connection) {
-		if (!vidi->edid) {
-			DRM_DEBUG_KMS("edid data is null.\n");
+		struct edid *raw_edid  = (struct edid *)(uint32_t)vidi->edid;
+		if (!drm_edid_is_valid(raw_edid)) {
+			DRM_DEBUG_KMS("edid data is invalid.\n");
 			return -EINVAL;
 		}
-		raw_edid = (struct edid *)(uint32_t)vidi->edid;
 		edid_len = (1 + raw_edid->extensions) * EDID_LENGTH;
 		ctx->raw_edid = kzalloc(edid_len, GFP_KERNEL);
 		if (!ctx->raw_edid) {

drivers/gpu/drm/exynos/exynos_hdmi.c

@@ -34,7 +34,6 @@
 #include <linux/regulator/consumer.h>
 #include <linux/io.h>
 #include <linux/of_gpio.h>
-#include <plat/gpio-cfg.h>
 
 #include <drm/exynos_drm.h>
 
@@ -98,8 +97,7 @@ struct hdmi_context {
 
 	void __iomem			*regs;
 	void				*parent_ctx;
-	int				external_irq;
-	int				internal_irq;
+	int				irq;
 
 	struct i2c_client		*ddc_port;
 	struct i2c_client		*hdmiphy_port;
@@ -1391,8 +1389,7 @@ static bool hdmi_is_connected(void *ctx)
 	return hdata->hpd;
 }
 
-static int hdmi_get_edid(void *ctx, struct drm_connector *connector,
-				u8 *edid, int len)
+static struct edid *hdmi_get_edid(void *ctx, struct drm_connector *connector)
 {
 	struct edid *raw_edid;
 	struct hdmi_context *hdata = ctx;
@@ -1400,22 +1397,18 @@ static int hdmi_get_edid(void *ctx, struct drm_connector *connector,
 	DRM_DEBUG_KMS("[%d] %s\n", __LINE__, __func__);
 
 	if (!hdata->ddc_port)
-		return -ENODEV;
+		return ERR_PTR(-ENODEV);
 
 	raw_edid = drm_get_edid(connector, hdata->ddc_port->adapter);
-	if (raw_edid) {
-		hdata->dvi_mode = !drm_detect_hdmi_monitor(raw_edid);
-		memcpy(edid, raw_edid, min((1 + raw_edid->extensions)
-					* EDID_LENGTH, len));
-		DRM_DEBUG_KMS("%s : width[%d] x height[%d]\n",
-			(hdata->dvi_mode ? "dvi monitor" : "hdmi monitor"),
-			raw_edid->width_cm, raw_edid->height_cm);
-		kfree(raw_edid);
-	} else {
-		return -ENODEV;
-	}
+	if (!raw_edid)
+		return ERR_PTR(-ENODEV);
 
-	return 0;
+	hdata->dvi_mode = !drm_detect_hdmi_monitor(raw_edid);
+	DRM_DEBUG_KMS("%s : width[%d] x height[%d]\n",
+		(hdata->dvi_mode ? "dvi monitor" : "hdmi monitor"),
+		raw_edid->width_cm, raw_edid->height_cm);
+
+	return raw_edid;
 }
 
 static int hdmi_v13_check_timing(struct fb_videomode *check_timing)
@@ -1652,16 +1645,16 @@ static void hdmi_conf_reset(struct hdmi_context *hdata)
 
 	/* resetting HDMI core */
 	hdmi_reg_writemask(hdata, reg,  0, HDMI_CORE_SW_RSTOUT);
-	mdelay(10);
+	usleep_range(10000, 12000);
 	hdmi_reg_writemask(hdata, reg, ~0, HDMI_CORE_SW_RSTOUT);
-	mdelay(10);
+	usleep_range(10000, 12000);
 }
 
 static void hdmi_conf_init(struct hdmi_context *hdata)
 {
 	struct hdmi_infoframe infoframe;
 
-	/* disable HPD interrupts */
+	/* disable HPD interrupts from HDMI IP block, use GPIO instead */
 	hdmi_reg_writemask(hdata, HDMI_INTC_CON, 0, HDMI_INTC_EN_GLOBAL |
 		HDMI_INTC_EN_HPD_PLUG | HDMI_INTC_EN_HPD_UNPLUG);
 
@@ -1779,7 +1772,7 @@ static void hdmi_v13_timing_apply(struct hdmi_context *hdata)
 		u32 val = hdmi_reg_read(hdata, HDMI_V13_PHY_STATUS);
 		if (val & HDMI_PHY_STATUS_READY)
 			break;
-		mdelay(1);
+		usleep_range(1000, 2000);
 	}
 	/* steady state not achieved */
 	if (tries == 0) {
@@ -1946,7 +1939,7 @@ static void hdmi_v14_timing_apply(struct hdmi_context *hdata)
 		u32 val = hdmi_reg_read(hdata, HDMI_PHY_STATUS_0);
 		if (val & HDMI_PHY_STATUS_READY)
 			break;
-		mdelay(1);
+		usleep_range(1000, 2000);
 	}
 	/* steady state not achieved */
 	if (tries == 0) {
@@ -1998,9 +1991,9 @@ static void hdmiphy_conf_reset(struct hdmi_context *hdata)
 
 	/* reset hdmiphy */
 	hdmi_reg_writemask(hdata, reg, ~0, HDMI_PHY_SW_RSTOUT);
-	mdelay(10);
+	usleep_range(10000, 12000);
 	hdmi_reg_writemask(hdata, reg,  0, HDMI_PHY_SW_RSTOUT);
-	mdelay(10);
+	usleep_range(10000, 12000);
 }
 
 static void hdmiphy_poweron(struct hdmi_context *hdata)
@@ -2048,7 +2041,7 @@ static void hdmiphy_conf_apply(struct hdmi_context *hdata)
 		return;
 	}
 
-	mdelay(10);
+	usleep_range(10000, 12000);
 
 	/* operation mode */
 	operation[0] = 0x1f;
@@ -2170,6 +2163,13 @@ static void hdmi_commit(void *ctx)
 
 	DRM_DEBUG_KMS("[%d] %s\n", __LINE__, __func__);
 
+	mutex_lock(&hdata->hdmi_mutex);
+	if (!hdata->powered) {
+		mutex_unlock(&hdata->hdmi_mutex);
+		return;
+	}
+	mutex_unlock(&hdata->hdmi_mutex);
+
 	hdmi_conf_apply(hdata);
 }
 
@@ -2265,7 +2265,7 @@ static struct exynos_hdmi_ops hdmi_ops = {
 	.dpms		= hdmi_dpms,
 };
 
-static irqreturn_t hdmi_external_irq_thread(int irq, void *arg)
+static irqreturn_t hdmi_irq_thread(int irq, void *arg)
 {
 	struct exynos_drm_hdmi_context *ctx = arg;
 	struct hdmi_context *hdata = ctx->ctx;
@@ -2280,31 +2280,6 @@ static irqreturn_t hdmi_external_irq_thread(int irq, void *arg)
 	return IRQ_HANDLED;
 }
 
-static irqreturn_t hdmi_internal_irq_thread(int irq, void *arg)
-{
-	struct exynos_drm_hdmi_context *ctx = arg;
-	struct hdmi_context *hdata = ctx->ctx;
-	u32 intc_flag;
-
-	intc_flag = hdmi_reg_read(hdata, HDMI_INTC_FLAG);
-	/* clearing flags for HPD plug/unplug */
-	if (intc_flag & HDMI_INTC_FLAG_HPD_UNPLUG) {
-		DRM_DEBUG_KMS("unplugged\n");
-		hdmi_reg_writemask(hdata, HDMI_INTC_FLAG, ~0,
-			HDMI_INTC_FLAG_HPD_UNPLUG);
-	}
-	if (intc_flag & HDMI_INTC_FLAG_HPD_PLUG) {
-		DRM_DEBUG_KMS("plugged\n");
-		hdmi_reg_writemask(hdata, HDMI_INTC_FLAG, ~0,
-			HDMI_INTC_FLAG_HPD_PLUG);
-	}
-
-	if (ctx->drm_dev)
-		drm_helper_hpd_irq_event(ctx->drm_dev);
-
-	return IRQ_HANDLED;
-}
-
 static int hdmi_resources_init(struct hdmi_context *hdata)
 {
 	struct device *dev = hdata->dev;
@@ -2555,39 +2530,24 @@ static int hdmi_probe(struct platform_device *pdev)
 
 	hdata->hdmiphy_port = hdmi_hdmiphy;
 
-	hdata->external_irq = gpio_to_irq(hdata->hpd_gpio);
-	if (hdata->external_irq < 0) {
-		DRM_ERROR("failed to get GPIO external irq\n");
-		ret = hdata->external_irq;
-		goto err_hdmiphy;
-	}
-
-	hdata->internal_irq = platform_get_irq(pdev, 0);
-	if (hdata->internal_irq < 0) {
-		DRM_ERROR("failed to get platform internal irq\n");
-		ret = hdata->internal_irq;
+	hdata->irq = gpio_to_irq(hdata->hpd_gpio);
+	if (hdata->irq < 0) {
+		DRM_ERROR("failed to get GPIO irq\n");
+		ret = hdata->irq;
 		goto err_hdmiphy;
 	}
 
 	hdata->hpd = gpio_get_value(hdata->hpd_gpio);
 
-	ret = request_threaded_irq(hdata->external_irq, NULL,
-			hdmi_external_irq_thread, IRQF_TRIGGER_RISING |
+	ret = request_threaded_irq(hdata->irq, NULL,
+			hdmi_irq_thread, IRQF_TRIGGER_RISING |
 			IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
-			"hdmi_external", drm_hdmi_ctx);
+			"hdmi", drm_hdmi_ctx);
 	if (ret) {
-		DRM_ERROR("failed to register hdmi external interrupt\n");
+		DRM_ERROR("failed to register hdmi interrupt\n");
 		goto err_hdmiphy;
 	}
 
-	ret = request_threaded_irq(hdata->internal_irq, NULL,
-			hdmi_internal_irq_thread, IRQF_ONESHOT,
-			"hdmi_internal", drm_hdmi_ctx);
-	if (ret) {
-		DRM_ERROR("failed to register hdmi internal interrupt\n");
-		goto err_free_irq;
-	}
-
 	/* Attach HDMI Driver to common hdmi. */
 	exynos_hdmi_drv_attach(drm_hdmi_ctx);
 
@@ -2598,8 +2558,6 @@ static int hdmi_probe(struct platform_device *pdev)
 
 	return 0;
 
-err_free_irq:
-	free_irq(hdata->external_irq, drm_hdmi_ctx);
 err_hdmiphy:
 	i2c_del_driver(&hdmiphy_driver);
 err_ddc:
@@ -2617,8 +2575,7 @@ static int hdmi_remove(struct platform_device *pdev)
 
 	pm_runtime_disable(dev);
 
-	free_irq(hdata->internal_irq, hdata);
-	free_irq(hdata->external_irq, hdata);
+	free_irq(hdata->irq, hdata);
 
 
 	/* hdmiphy i2c driver */
@@ -2637,8 +2594,7 @@ static int hdmi_suspend(struct device *dev)
 
 	DRM_DEBUG_KMS("[%d] %s\n", __LINE__, __func__);
 
-	disable_irq(hdata->internal_irq);
-	disable_irq(hdata->external_irq);
+	disable_irq(hdata->irq);
 
 	hdata->hpd = false;
 	if (ctx->drm_dev)
@@ -2663,8 +2619,7 @@ static int hdmi_resume(struct device *dev)
 
 	hdata->hpd = gpio_get_value(hdata->hpd_gpio);
 
-	enable_irq(hdata->external_irq);
-	enable_irq(hdata->internal_irq);
+	enable_irq(hdata->irq);
 
 	if (!pm_runtime_suspended(dev)) {
 		DRM_DEBUG_KMS("%s : Already resumed\n", __func__);

drivers/gpu/drm/exynos/exynos_mixer.c

@@ -600,7 +600,7 @@ static void vp_win_reset(struct mixer_context *ctx)
 		/* waiting until VP_SRESET_PROCESSING is 0 */
 		if (~vp_reg_read(res, VP_SRESET) & VP_SRESET_PROCESSING)
 			break;
-		mdelay(10);
+		usleep_range(10000, 12000);
 	}
 	WARN(tries == 0, "failed to reset Video Processor\n");
 }
@@ -776,6 +776,13 @@ static void mixer_win_commit(void *ctx, int win)
 
 	DRM_DEBUG_KMS("[%d] %s, win: %d\n", __LINE__, __func__, win);
 
+	mutex_lock(&mixer_ctx->mixer_mutex);
+	if (!mixer_ctx->powered) {
+		mutex_unlock(&mixer_ctx->mixer_mutex);
+		return;
+	}
+	mutex_unlock(&mixer_ctx->mixer_mutex);
+
 	if (win > 1 && mixer_ctx->vp_enabled)
 		vp_video_buffer(mixer_ctx, win);
 	else

drivers/gpu/drm/i915/i915_debugfs.c

@@ -30,6 +30,7 @@
 #include <linux/debugfs.h>
 #include <linux/slab.h>
 #include <linux/export.h>
+#include <generated/utsrelease.h>
 #include <drm/drmP.h>
 #include "intel_drv.h"
 #include "intel_ringbuffer.h"
@@ -690,6 +691,7 @@ static int i915_error_state(struct seq_file *m, void *unused)
 
 	seq_printf(m, "Time: %ld s %ld us\n", error->time.tv_sec,
 		   error->time.tv_usec);
+	seq_printf(m, "Kernel: " UTS_RELEASE);
 	seq_printf(m, "PCI ID: 0x%04x\n", dev->pci_device);
 	seq_printf(m, "EIR: 0x%08x\n", error->eir);
 	seq_printf(m, "IER: 0x%08x\n", error->ier);

drivers/gpu/drm/i915/i915_reg.h

@@ -533,6 +533,7 @@
 #define MI_MODE		0x0209c
 # define VS_TIMER_DISPATCH				(1 << 6)
 # define MI_FLUSH_ENABLE				(1 << 12)
+# define ASYNC_FLIP_PERF_DISABLE			(1 << 14)
 
 #define GEN6_GT_MODE	0x20d0
 #define   GEN6_GT_MODE_HI				(1 << 9)

drivers/gpu/drm/i915/intel_ringbuffer.c

@@ -505,13 +505,25 @@ static int init_render_ring(struct intel_ring_buffer *ring)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	int ret = init_ring_common(ring);
 
-	if (INTEL_INFO(dev)->gen > 3) {
+	if (INTEL_INFO(dev)->gen > 3)
 		I915_WRITE(MI_MODE, _MASKED_BIT_ENABLE(VS_TIMER_DISPATCH));
-		if (IS_GEN7(dev))
-			I915_WRITE(GFX_MODE_GEN7,
-				   _MASKED_BIT_DISABLE(GFX_TLB_INVALIDATE_ALWAYS) |
-				   _MASKED_BIT_ENABLE(GFX_REPLAY_MODE));
-	}
+
+	/* We need to disable the AsyncFlip performance optimisations in order
+	 * to use MI_WAIT_FOR_EVENT within the CS. It should already be
+	 * programmed to '1' on all products.
+	 */
+	if (INTEL_INFO(dev)->gen >= 6)
+		I915_WRITE(MI_MODE, _MASKED_BIT_ENABLE(ASYNC_FLIP_PERF_DISABLE));
+
+	/* Required for the hardware to program scanline values for waiting */
+	if (INTEL_INFO(dev)->gen == 6)
+		I915_WRITE(GFX_MODE,
+			   _MASKED_BIT_ENABLE(GFX_TLB_INVALIDATE_ALWAYS));
+
+	if (IS_GEN7(dev))
+		I915_WRITE(GFX_MODE_GEN7,
+			   _MASKED_BIT_DISABLE(GFX_TLB_INVALIDATE_ALWAYS) |
+			   _MASKED_BIT_ENABLE(GFX_REPLAY_MODE));
 
 	if (INTEL_INFO(dev)->gen >= 5) {
 		ret = init_pipe_control(ring);

drivers/gpu/drm/radeon/ni.c

@@ -1216,7 +1216,7 @@ void cayman_dma_stop(struct radeon_device *rdev)
 int cayman_dma_resume(struct radeon_device *rdev)
 {
 	struct radeon_ring *ring;
-	u32 rb_cntl, dma_cntl;
+	u32 rb_cntl, dma_cntl, ib_cntl;
 	u32 rb_bufsz;
 	u32 reg_offset, wb_offset;
 	int i, r;
@@ -1265,7 +1265,11 @@ int cayman_dma_resume(struct radeon_device *rdev)
 		WREG32(DMA_RB_BASE + reg_offset, ring->gpu_addr >> 8);
 
 		/* enable DMA IBs */
-		WREG32(DMA_IB_CNTL + reg_offset, DMA_IB_ENABLE | CMD_VMID_FORCE);
+		ib_cntl = DMA_IB_ENABLE | CMD_VMID_FORCE;
+#ifdef __BIG_ENDIAN
+		ib_cntl |= DMA_IB_SWAP_ENABLE;
+#endif
+		WREG32(DMA_IB_CNTL + reg_offset, ib_cntl);
 
 		dma_cntl = RREG32(DMA_CNTL + reg_offset);
 		dma_cntl &= ~CTXEMPTY_INT_ENABLE;

drivers/gpu/drm/radeon/r600.c

@@ -2313,7 +2313,7 @@ void r600_dma_stop(struct radeon_device *rdev)
 int r600_dma_resume(struct radeon_device *rdev)
 {
 	struct radeon_ring *ring = &rdev->ring[R600_RING_TYPE_DMA_INDEX];
-	u32 rb_cntl, dma_cntl;
+	u32 rb_cntl, dma_cntl, ib_cntl;
 	u32 rb_bufsz;
 	int r;
 
@@ -2353,7 +2353,11 @@ int r600_dma_resume(struct radeon_device *rdev)
 	WREG32(DMA_RB_BASE, ring->gpu_addr >> 8);
 
 	/* enable DMA IBs */
-	WREG32(DMA_IB_CNTL, DMA_IB_ENABLE);
+	ib_cntl = DMA_IB_ENABLE;
+#ifdef __BIG_ENDIAN
+	ib_cntl |= DMA_IB_SWAP_ENABLE;
+#endif
+	WREG32(DMA_IB_CNTL, ib_cntl);
 
 	dma_cntl = RREG32(DMA_CNTL);
 	dma_cntl &= ~CTXEMPTY_INT_ENABLE;

drivers/gpu/drm/radeon/radeon_cs.c

@@ -286,6 +286,8 @@ int radeon_cs_parser_init(struct radeon_cs_parser *p, void *data)
 			    p->chunks[p->chunk_ib_idx].kpage[1] == NULL) {
 				kfree(p->chunks[p->chunk_ib_idx].kpage[0]);
 				kfree(p->chunks[p->chunk_ib_idx].kpage[1]);
+				p->chunks[p->chunk_ib_idx].kpage[0] = NULL;
+				p->chunks[p->chunk_ib_idx].kpage[1] = NULL;
 				return -ENOMEM;
 			}
 		}

drivers/gpu/drm/radeon/radeon_cursor.c

@@ -241,7 +241,8 @@ int radeon_crtc_cursor_move(struct drm_crtc *crtc,
 		y = 0;
 	}
 
-	if (ASIC_IS_AVIVO(rdev)) {
+	/* fixed on DCE6 and newer */
+	if (ASIC_IS_AVIVO(rdev) && !ASIC_IS_DCE6(rdev)) {
 		int i = 0;
 		struct drm_crtc *crtc_p;
 

drivers/gpu/drm/radeon/radeon_device.c

@@ -429,7 +429,8 @@ bool radeon_card_posted(struct radeon_device *rdev)
 {
 	uint32_t reg;
 
-	if (efi_enabled && rdev->pdev->subsystem_vendor == PCI_VENDOR_ID_APPLE)
+	if (efi_enabled(EFI_BOOT) &&
+	    rdev->pdev->subsystem_vendor == PCI_VENDOR_ID_APPLE)
 		return false;
 
 	/* first check CRTCs */

drivers/gpu/drm/radeon/radeon_display.c

@@ -1122,7 +1122,7 @@ radeon_user_framebuffer_create(struct drm_device *dev,
 	if (ret) {
 		kfree(radeon_fb);
 		drm_gem_object_unreference_unlocked(obj);
-		return NULL;
+		return ERR_PTR(ret);
 	}
 
 	return &radeon_fb->base;

drivers/hid/hid-ids.h

@@ -306,6 +306,9 @@
 #define USB_VENDOR_ID_EZKEY		0x0518
 #define USB_DEVICE_ID_BTC_8193		0x0002
 
+#define USB_VENDOR_ID_FORMOSA          0x147a
+#define USB_DEVICE_ID_FORMOSA_IR_RECEIVER      0xe03e
+
 #define USB_VENDOR_ID_FREESCALE		0x15A2
 #define USB_DEVICE_ID_FREESCALE_MX28	0x004F
 

drivers/hid/i2c-hid/i2c-hid.c

@@ -540,13 +540,24 @@ static int i2c_hid_output_raw_report(struct hid_device *hid, __u8 *buf,
 {
 	struct i2c_client *client = hid->driver_data;
 	int report_id = buf[0];
+	int ret;
 
 	if (report_type == HID_INPUT_REPORT)
 		return -EINVAL;
 
-	return i2c_hid_set_report(client,
+	if (report_id) {
+		buf++;
+		count--;
+	}
+
+	ret = i2c_hid_set_report(client,
 				report_type == HID_FEATURE_REPORT ? 0x03 : 0x02,
 				report_id, buf, count);
+
+	if (report_id && ret >= 0)
+		ret++; /* add report_id to the number of transfered bytes */
+
+	return ret;
 }
 
 static int i2c_hid_parse(struct hid_device *hid)

drivers/hid/usbhid/hid-quirks.c

@@ -70,6 +70,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_AXIS_295, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_DMI, USB_DEVICE_ID_DMI_ENC, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2700, HID_QUIRK_NOGET },
+	{ USB_VENDOR_ID_FORMOSA, USB_DEVICE_ID_FORMOSA_IR_RECEIVER, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_FREESCALE, USB_DEVICE_ID_FREESCALE_MX28, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_NOVATEK, USB_DEVICE_ID_NOVATEK_MOUSE, HID_QUIRK_NO_INIT_REPORTS },

drivers/iommu/amd_iommu_init.c

@@ -974,6 +974,38 @@ static void __init free_iommu_all(void)
 	}
 }
 
+/*
+ * Family15h Model 10h-1fh erratum 746 (IOMMU Logging May Stall Translations)
+ * Workaround:
+ *     BIOS should disable L2B micellaneous clock gating by setting
+ *     L2_L2B_CK_GATE_CONTROL[CKGateL2BMiscDisable](D0F2xF4_x90[2]) = 1b
+ */
+static void __init amd_iommu_erratum_746_workaround(struct amd_iommu *iommu)
+{
+	u32 value;
+
+	if ((boot_cpu_data.x86 != 0x15) ||
+	    (boot_cpu_data.x86_model < 0x10) ||
+	    (boot_cpu_data.x86_model > 0x1f))
+		return;
+
+	pci_write_config_dword(iommu->dev, 0xf0, 0x90);
+	pci_read_config_dword(iommu->dev, 0xf4, &value);
+
+	if (value & BIT(2))
+		return;
+
+	/* Select NB indirect register 0x90 and enable writing */
+	pci_write_config_dword(iommu->dev, 0xf0, 0x90 | (1 << 8));
+
+	pci_write_config_dword(iommu->dev, 0xf4, value | 0x4);
+	pr_info("AMD-Vi: Applying erratum 746 workaround for IOMMU at %s\n",
+		dev_name(&iommu->dev->dev));
+
+	/* Clear the enable writing bit */
+	pci_write_config_dword(iommu->dev, 0xf0, 0x90);
+}
+
 /*
  * This function clues the initialization function for one IOMMU
  * together and also allocates the command buffer and programs the
@@ -1172,6 +1204,8 @@ static int iommu_init_pci(struct amd_iommu *iommu)
 			iommu->stored_l2[i] = iommu_read_l2(iommu, i);
 	}
 
+	amd_iommu_erratum_746_workaround(iommu);
+
 	return pci_enable_device(iommu->dev);
 }
 

drivers/iommu/intel-iommu.c

@@ -4234,6 +4234,21 @@ static struct iommu_ops intel_iommu_ops = {
 	.pgsize_bitmap	= INTEL_IOMMU_PGSIZES,
 };
 
+static void quirk_iommu_g4x_gfx(struct pci_dev *dev)
+{
+	/* G4x/GM45 integrated gfx dmar support is totally busted. */
+	printk(KERN_INFO "DMAR: Disabling IOMMU for graphics on this chipset\n");
+	dmar_map_gfx = 0;
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2a40, quirk_iommu_g4x_gfx);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e00, quirk_iommu_g4x_gfx);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e10, quirk_iommu_g4x_gfx);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e20, quirk_iommu_g4x_gfx);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e30, quirk_iommu_g4x_gfx);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e40, quirk_iommu_g4x_gfx);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e90, quirk_iommu_g4x_gfx);
+
 static void quirk_iommu_rwbf(struct pci_dev *dev)
 {
 	/*
@@ -4242,12 +4257,6 @@ static void quirk_iommu_rwbf(struct pci_dev *dev)
 	 */
 	printk(KERN_INFO "DMAR: Forcing write-buffer flush capability\n");
 	rwbf_quirk = 1;
-
-	/* https://bugzilla.redhat.com/show_bug.cgi?id=538163 */
-	if (dev->revision == 0x07) {
-		printk(KERN_INFO "DMAR: Disabling IOMMU for graphics on this chipset\n");
-		dmar_map_gfx = 0;
-	}
 }
 
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2a40, quirk_iommu_rwbf);

drivers/isdn/gigaset/capi.c

@@ -248,6 +248,8 @@ static inline void dump_rawmsg(enum debuglevel level, const char *tag,
 		CAPIMSG_APPID(data), CAPIMSG_MSGID(data), l,
 		CAPIMSG_CONTROL(data));
 	l -= 12;
+	if (l <= 0)
+		return;
 	dbgline = kmalloc(3 * l, GFP_ATOMIC);
 	if (!dbgline)
 		return;

drivers/md/dm-raid.c

@@ -340,24 +340,22 @@ static int validate_region_size(struct raid_set *rs, unsigned long region_size)
 }
 
 /*
- * validate_rebuild_devices
+ * validate_raid_redundancy
  * @rs
  *
- * Determine if the devices specified for rebuild can result in a valid
- * usable array that is capable of rebuilding the given devices.
+ * Determine if there are enough devices in the array that haven't
+ * failed (or are being rebuilt) to form a usable array.
  *
  * Returns: 0 on success, -EINVAL on failure.
  */
-static int validate_rebuild_devices(struct raid_set *rs)
+static int validate_raid_redundancy(struct raid_set *rs)
 {
 	unsigned i, rebuild_cnt = 0;
 	unsigned rebuilds_per_group, copies, d;
 
-	if (!(rs->print_flags & DMPF_REBUILD))
-		return 0;
-
 	for (i = 0; i < rs->md.raid_disks; i++)
-		if (!test_bit(In_sync, &rs->dev[i].rdev.flags))
+		if (!test_bit(In_sync, &rs->dev[i].rdev.flags) ||
+		    !rs->dev[i].rdev.sb_page)
 			rebuild_cnt++;
 
 	switch (rs->raid_type->level) {
@@ -393,27 +391,24 @@ static int validate_rebuild_devices(struct raid_set *rs)
 		 *          A    A    B    B    C
 		 *          C    D    D    E    E
 		 */
-		rebuilds_per_group = 0;
 		for (i = 0; i < rs->md.raid_disks * copies; i++) {
+			if (!(i % copies))
+				rebuilds_per_group = 0;
 			d = i % rs->md.raid_disks;
-			if (!test_bit(In_sync, &rs->dev[d].rdev.flags) &&
+			if ((!rs->dev[d].rdev.sb_page ||
+			     !test_bit(In_sync, &rs->dev[d].rdev.flags)) &&
 			    (++rebuilds_per_group >= copies))
 				goto too_many;
-			if (!((i + 1) % copies))
-				rebuilds_per_group = 0;
 		}
 		break;
 	default:
-		DMERR("The rebuild parameter is not supported for %s",
-		      rs->raid_type->name);
-		rs->ti->error = "Rebuild not supported for this RAID type";
-		return -EINVAL;
+		if (rebuild_cnt)
+			return -EINVAL;
 	}
 
 	return 0;
 
 too_many:
-	rs->ti->error = "Too many rebuild devices specified";
 	return -EINVAL;
 }
 
@@ -664,9 +659,6 @@ static int parse_raid_params(struct raid_set *rs, char **argv,
 	}
 	rs->md.dev_sectors = sectors_per_dev;
 
-	if (validate_rebuild_devices(rs))
-		return -EINVAL;
-
 	/* Assume there are no metadata devices until the drives are parsed */
 	rs->md.persistent = 0;
 	rs->md.external = 1;
@@ -995,28 +987,10 @@ static int super_validate(struct mddev *mddev, struct md_rdev *rdev)
 static int analyse_superblocks(struct dm_target *ti, struct raid_set *rs)
 {
 	int ret;
-	unsigned redundancy = 0;
 	struct raid_dev *dev;
 	struct md_rdev *rdev, *tmp, *freshest;
 	struct mddev *mddev = &rs->md;
 
-	switch (rs->raid_type->level) {
-	case 1:
-		redundancy = rs->md.raid_disks - 1;
-		break;
-	case 4:
-	case 5:
-	case 6:
-		redundancy = rs->raid_type->parity_devs;
-		break;
-	case 10:
-		redundancy = raid10_md_layout_to_copies(mddev->layout) - 1;
-		break;
-	default:
-		ti->error = "Unknown RAID type";
-		return -EINVAL;
-	}
-
 	freshest = NULL;
 	rdev_for_each_safe(rdev, tmp, mddev) {
 		/*
@@ -1045,44 +1019,43 @@ static int analyse_superblocks(struct dm_target *ti, struct raid_set *rs)
 			break;
 		default:
 			dev = container_of(rdev, struct raid_dev, rdev);
-			if (redundancy--) {
-				if (dev->meta_dev)
-					dm_put_device(ti, dev->meta_dev);
-
-				dev->meta_dev = NULL;
-				rdev->meta_bdev = NULL;
+			if (dev->meta_dev)
+				dm_put_device(ti, dev->meta_dev);
 
-				if (rdev->sb_page)
-					put_page(rdev->sb_page);
+			dev->meta_dev = NULL;
+			rdev->meta_bdev = NULL;
 
-				rdev->sb_page = NULL;
+			if (rdev->sb_page)
+				put_page(rdev->sb_page);
 
-				rdev->sb_loaded = 0;
+			rdev->sb_page = NULL;
 
-				/*
-				 * We might be able to salvage the data device
-				 * even though the meta device has failed.  For
-				 * now, we behave as though '- -' had been
-				 * set for this device in the table.
-				 */
-				if (dev->data_dev)
-					dm_put_device(ti, dev->data_dev);
+			rdev->sb_loaded = 0;
 
-				dev->data_dev = NULL;
-				rdev->bdev = NULL;
+			/*
+			 * We might be able to salvage the data device
+			 * even though the meta device has failed.  For
+			 * now, we behave as though '- -' had been
+			 * set for this device in the table.
+			 */
+			if (dev->data_dev)
+				dm_put_device(ti, dev->data_dev);
 
-				list_del(&rdev->same_set);
+			dev->data_dev = NULL;
+			rdev->bdev = NULL;
 
-				continue;
-			}
-			ti->error = "Failed to load superblock";
-			return ret;
+			list_del(&rdev->same_set);
 		}
 	}
 
 	if (!freshest)
 		return 0;
 
+	if (validate_raid_redundancy(rs)) {
+		rs->ti->error = "Insufficient redundancy to activate array";
+		return -EINVAL;
+	}
+
 	/*
 	 * Validation of the freshest device provides the source of
 	 * validation for the remaining devices.
@@ -1432,7 +1405,7 @@ static void raid_resume(struct dm_target *ti)
 
 static struct target_type raid_target = {
 	.name = "raid",
-	.version = {1, 4, 0},
+	.version = {1, 4, 1},
 	.module = THIS_MODULE,
 	.ctr = raid_ctr,
 	.dtr = raid_dtr,

drivers/md/dm-thin.c

@@ -2746,19 +2746,9 @@ static int thin_iterate_devices(struct dm_target *ti,
 	return 0;
 }
 
-/*
- * A thin device always inherits its queue limits from its pool.
- */
-static void thin_io_hints(struct dm_target *ti, struct queue_limits *limits)
-{
-	struct thin_c *tc = ti->private;
-
-	*limits = bdev_get_queue(tc->pool_dev->bdev)->limits;
-}
-
 static struct target_type thin_target = {
 	.name = "thin",
-	.version = {1, 6, 0},
+	.version = {1, 7, 0},
 	.module	= THIS_MODULE,
 	.ctr = thin_ctr,
 	.dtr = thin_dtr,
@@ -2767,7 +2757,6 @@ static struct target_type thin_target = {
 	.postsuspend = thin_postsuspend,
 	.status = thin_status,
 	.iterate_devices = thin_iterate_devices,
-	.io_hints = thin_io_hints,
 };
 
 /*----------------------------------------------------------------*/

drivers/md/dm.c

@@ -1188,6 +1188,7 @@ static int __clone_and_map_changing_extent_only(struct clone_info *ci,
 {
 	struct dm_target *ti;
 	sector_t len;
+	unsigned num_requests;
 
 	do {
 		ti = dm_table_find_target(ci->map, ci->sector);
@@ -1200,7 +1201,8 @@ static int __clone_and_map_changing_extent_only(struct clone_info *ci,
 		 * reconfiguration might also have changed that since the
 		 * check was performed.
 		 */
-		if (!get_num_requests || !get_num_requests(ti))
+		num_requests = get_num_requests ? get_num_requests(ti) : 0;
+		if (!num_requests)
 			return -EOPNOTSUPP;
 
 		if (is_split_required && !is_split_required(ti))
@@ -1208,7 +1210,7 @@ static int __clone_and_map_changing_extent_only(struct clone_info *ci,
 		else
 			len = min(ci->sector_count, max_io_len(ci->sector, ti));
 
-		__issue_target_requests(ci, ti, ti->num_discard_requests, len);
+		__issue_target_requests(ci, ti, num_requests, len);
 
 		ci->sector += len;
 	} while (ci->sector_count -= len);

drivers/mfd/Kconfig

@@ -237,6 +237,7 @@ config MFD_TPS65910
 	depends on I2C=y && GPIOLIB
 	select MFD_CORE
 	select REGMAP_I2C
+	select REGMAP_IRQ
 	select IRQ_DOMAIN
 	help
 	  if you say yes here you get support for the TPS65910 series of

drivers/mfd/ab8500-core.c

@@ -19,6 +19,7 @@
 #include <linux/mfd/core.h>
 #include <linux/mfd/abx500.h>
 #include <linux/mfd/abx500/ab8500.h>
+#include <linux/mfd/abx500/ab8500-bm.h>
 #include <linux/mfd/dbx500-prcmu.h>
 #include <linux/regulator/ab8500.h>
 #include <linux/of.h>

drivers/mfd/arizona-core.c

@@ -239,7 +239,12 @@ static int arizona_runtime_resume(struct device *dev)
 		return ret;
 	}
 
-	regcache_sync(arizona->regmap);
+	ret = regcache_sync(arizona->regmap);
+	if (ret != 0) {
+		dev_err(arizona->dev, "Failed to restore register cache\n");
+		regulator_disable(arizona->dcvdd);
+		return ret;
+	}
 
 	return 0;
 }

drivers/mfd/arizona-irq.c

@@ -176,14 +176,7 @@ int arizona_irq_init(struct arizona *arizona)
 		aod = &wm5102_aod;
 		irq = &wm5102_irq;
 
-		switch (arizona->rev) {
-		case 0:
-		case 1:
-			ctrlif_error = false;
-			break;
-		default:
-			break;
-		}
+		ctrlif_error = false;
 		break;
 #endif
 #ifdef CONFIG_MFD_WM5110
@@ -191,14 +184,7 @@ int arizona_irq_init(struct arizona *arizona)
 		aod = &wm5110_aod;
 		irq = &wm5110_irq;
 
-		switch (arizona->rev) {
-		case 0:
-		case 1:
-			ctrlif_error = false;
-			break;
-		default:
-			break;
-		}
+		ctrlif_error = false;
 		break;
 #endif
 	default:

drivers/mfd/da9052-i2c.c

@@ -27,6 +27,66 @@
 #include <linux/of_device.h>
 #endif
 
+/* I2C safe register check */
+static inline bool i2c_safe_reg(unsigned char reg)
+{
+	switch (reg) {
+	case DA9052_STATUS_A_REG:
+	case DA9052_STATUS_B_REG:
+	case DA9052_STATUS_C_REG:
+	case DA9052_STATUS_D_REG:
+	case DA9052_ADC_RES_L_REG:
+	case DA9052_ADC_RES_H_REG:
+	case DA9052_VDD_RES_REG:
+	case DA9052_ICHG_AV_REG:
+	case DA9052_TBAT_RES_REG:
+	case DA9052_ADCIN4_RES_REG:
+	case DA9052_ADCIN5_RES_REG:
+	case DA9052_ADCIN6_RES_REG:
+	case DA9052_TJUNC_RES_REG:
+	case DA9052_TSI_X_MSB_REG:
+	case DA9052_TSI_Y_MSB_REG:
+	case DA9052_TSI_LSB_REG:
+	case DA9052_TSI_Z_MSB_REG:
+		return true;
+	default:
+		return false;
+	}
+}
+
+/*
+ * There is an issue with DA9052 and DA9053_AA/BA/BB PMIC where the PMIC
+ * gets lockup up or fails to respond following a system reset.
+ * This fix is to follow any read or write with a dummy read to a safe
+ * register.
+ */
+int da9052_i2c_fix(struct da9052 *da9052, unsigned char reg)
+{
+	int val;
+
+	switch (da9052->chip_id) {
+	case DA9052:
+	case DA9053_AA:
+	case DA9053_BA:
+	case DA9053_BB:
+		/* A dummy read to a safe register address. */
+	if (!i2c_safe_reg(reg))
+			return regmap_read(da9052->regmap,
+					   DA9052_PARK_REGISTER,
+					   &val);
+		break;
+	default:
+		/*
+		 * For other chips parking of I2C register
+		 * to a safe place is not required.
+		 */
+		break;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(da9052_i2c_fix);
+
 static int da9052_i2c_enable_multiwrite(struct da9052 *da9052)
 {
 	int reg_val, ret;
@@ -83,6 +143,7 @@ static int da9052_i2c_probe(struct i2c_client *client,
 
 	da9052->dev = &client->dev;
 	da9052->chip_irq = client->irq;
+	da9052->fix_io = da9052_i2c_fix;
 
 	i2c_set_clientdata(client, da9052);
 

drivers/mfd/db8500-prcmu.c

@@ -2524,7 +2524,7 @@ static bool read_mailbox_0(void)
 
 		for (n = 0; n < NUM_PRCMU_WAKEUPS; n++) {
 			if (ev & prcmu_irq_bit[n])
-				generic_handle_irq(IRQ_PRCMU_BASE + n);
+				generic_handle_irq(irq_find_mapping(db8500_irq_domain, n));
 		}
 		r = true;
 		break;
@@ -2737,13 +2737,14 @@ static int db8500_irq_map(struct irq_domain *d, unsigned int virq,
 }
 
 static struct irq_domain_ops db8500_irq_ops = {
-        .map    = db8500_irq_map,
-        .xlate  = irq_domain_xlate_twocell,
+	.map    = db8500_irq_map,
+	.xlate  = irq_domain_xlate_twocell,
 };
 
 static int db8500_irq_init(struct device_node *np)
 {
-	int irq_base = -1;
+	int irq_base = 0;
+	int i;
 
 	/* In the device tree case, just take some IRQs */
 	if (!np)
@@ -2758,6 +2759,10 @@ static int db8500_irq_init(struct device_node *np)
 		return -ENOSYS;
 	}
 
+	/* All wakeups will be used, so create mappings for all */
+	for (i = 0; i < NUM_PRCMU_WAKEUPS; i++)
+		irq_create_mapping(db8500_irq_domain, i);
+
 	return 0;
 }
 

drivers/mfd/max77686.c

@@ -93,15 +93,6 @@ static int max77686_i2c_probe(struct i2c_client *i2c,
 	if (max77686 == NULL)
 		return -ENOMEM;
 
-	max77686->regmap = regmap_init_i2c(i2c, &max77686_regmap_config);
-	if (IS_ERR(max77686->regmap)) {
-		ret = PTR_ERR(max77686->regmap);
-		dev_err(max77686->dev, "Failed to allocate register map: %d\n",
-				ret);
-		kfree(max77686);
-		return ret;
-	}
-
 	i2c_set_clientdata(i2c, max77686);
 	max77686->dev = &i2c->dev;
 	max77686->i2c = i2c;
@@ -111,6 +102,15 @@ static int max77686_i2c_probe(struct i2c_client *i2c,
 	max77686->irq_gpio = pdata->irq_gpio;
 	max77686->irq = i2c->irq;
 
+	max77686->regmap = regmap_init_i2c(i2c, &max77686_regmap_config);
+	if (IS_ERR(max77686->regmap)) {
+		ret = PTR_ERR(max77686->regmap);
+		dev_err(max77686->dev, "Failed to allocate register map: %d\n",
+				ret);
+		kfree(max77686);
+		return ret;
+	}
+
 	if (regmap_read(max77686->regmap,
 			 MAX77686_REG_DEVICE_ID, &data) < 0) {
 		dev_err(max77686->dev,

drivers/mfd/max77693.c

@@ -114,35 +114,37 @@ static int max77693_i2c_probe(struct i2c_client *i2c,
 	u8 reg_data;
 	int ret = 0;
 
+	if (!pdata) {
+		dev_err(&i2c->dev, "No platform data found.\n");
+		return -EINVAL;
+	}
+
 	max77693 = devm_kzalloc(&i2c->dev,
 			sizeof(struct max77693_dev), GFP_KERNEL);
 	if (max77693 == NULL)
 		return -ENOMEM;
 
-	max77693->regmap = devm_regmap_init_i2c(i2c, &max77693_regmap_config);
-	if (IS_ERR(max77693->regmap)) {
-		ret = PTR_ERR(max77693->regmap);
-		dev_err(max77693->dev,"failed to allocate register map: %d\n",
-				ret);
-		goto err_regmap;
-	}
-
 	i2c_set_clientdata(i2c, max77693);
 	max77693->dev = &i2c->dev;
 	max77693->i2c = i2c;
 	max77693->irq = i2c->irq;
 	max77693->type = id->driver_data;
 
-	if (!pdata)
-		goto err_regmap;
+	max77693->regmap = devm_regmap_init_i2c(i2c, &max77693_regmap_config);
+	if (IS_ERR(max77693->regmap)) {
+		ret = PTR_ERR(max77693->regmap);
+		dev_err(max77693->dev, "failed to allocate register map: %d\n",
+				ret);
+		return ret;
+	}
 
 	max77693->wakeup = pdata->wakeup;
 
-	if (max77693_read_reg(max77693->regmap,
-				MAX77693_PMIC_REG_PMIC_ID2, &reg_data) < 0) {
+	ret = max77693_read_reg(max77693->regmap, MAX77693_PMIC_REG_PMIC_ID2,
+				&reg_data);
+	if (ret < 0) {
 		dev_err(max77693->dev, "device not found on this channel\n");
-		ret = -ENODEV;
-		goto err_regmap;
+		return ret;
 	} else
 		dev_info(max77693->dev, "device ID: 0x%x\n", reg_data);
 
@@ -163,7 +165,7 @@ static int max77693_i2c_probe(struct i2c_client *i2c,
 		ret = PTR_ERR(max77693->regmap_muic);
 		dev_err(max77693->dev,
 			"failed to allocate register map: %d\n", ret);
-		goto err_regmap;
+		goto err_regmap_muic;
 	}
 
 	ret = max77693_irq_init(max77693);
@@ -184,9 +186,9 @@ static int max77693_i2c_probe(struct i2c_client *i2c,
 err_mfd:
 	max77693_irq_exit(max77693);
 err_irq:
+err_regmap_muic:
 	i2c_unregister_device(max77693->muic);
 	i2c_unregister_device(max77693->haptic);
-err_regmap:
 	return ret;
 }
 

drivers/mfd/pcf50633-core.c

@@ -208,6 +208,8 @@ static int pcf50633_probe(struct i2c_client *client,
 	if (!pcf)
 		return -ENOMEM;
 
+	i2c_set_clientdata(client, pcf);
+	pcf->dev = &client->dev;
 	pcf->pdata = pdata;
 
 	mutex_init(&pcf->lock);
@@ -219,9 +221,6 @@ static int pcf50633_probe(struct i2c_client *client,
 		return ret;
 	}
 
-	i2c_set_clientdata(client, pcf);
-	pcf->dev = &client->dev;
-
 	version = pcf50633_reg_read(pcf, 0);
 	variant = pcf50633_reg_read(pcf, 1);
 	if (version < 0 || variant < 0) {

drivers/mfd/rtl8411.c

@@ -112,6 +112,21 @@ static int rtl8411_card_power_off(struct rtsx_pcr *pcr, int card)
 			BPP_LDO_POWB, BPP_LDO_SUSPEND);
 }
 
+static int rtl8411_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
+{
+	u8 mask, val;
+
+	mask = (BPP_REG_TUNED18 << BPP_TUNED18_SHIFT_8411) | BPP_PAD_MASK;
+	if (voltage == OUTPUT_3V3)
+		val = (BPP_ASIC_3V3 << BPP_TUNED18_SHIFT_8411) | BPP_PAD_3V3;
+	else if (voltage == OUTPUT_1V8)
+		val = (BPP_ASIC_1V8 << BPP_TUNED18_SHIFT_8411) | BPP_PAD_1V8;
+	else
+		return -EINVAL;
+
+	return rtsx_pci_write_register(pcr, LDO_CTL, mask, val);
+}
+
 static unsigned int rtl8411_cd_deglitch(struct rtsx_pcr *pcr)
 {
 	unsigned int card_exist;
@@ -163,6 +178,18 @@ static unsigned int rtl8411_cd_deglitch(struct rtsx_pcr *pcr)
 	return card_exist;
 }
 
+static int rtl8411_conv_clk_and_div_n(int input, int dir)
+{
+	int output;
+
+	if (dir == CLK_TO_DIV_N)
+		output = input * 4 / 5 - 2;
+	else
+		output = (input + 2) * 5 / 4;
+
+	return output;
+}
+
 static const struct pcr_ops rtl8411_pcr_ops = {
 	.extra_init_hw = rtl8411_extra_init_hw,
 	.optimize_phy = NULL,
@@ -172,7 +199,9 @@ static const struct pcr_ops rtl8411_pcr_ops = {
 	.disable_auto_blink = rtl8411_disable_auto_blink,
 	.card_power_on = rtl8411_card_power_on,
 	.card_power_off = rtl8411_card_power_off,
+	.switch_output_voltage = rtl8411_switch_output_voltage,
 	.cd_deglitch = rtl8411_cd_deglitch,
+	.conv_clk_and_div_n = rtl8411_conv_clk_and_div_n,
 };
 
 /* SD Pull Control Enable:

drivers/mfd/rts5209.c

@@ -144,6 +144,25 @@ static int rts5209_card_power_off(struct rtsx_pcr *pcr, int card)
 	return rtsx_pci_send_cmd(pcr, 100);
 }
 
+static int rts5209_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
+{
+	int err;
+
+	if (voltage == OUTPUT_3V3) {
+		err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4FC0 | 0x24);
+		if (err < 0)
+			return err;
+	} else if (voltage == OUTPUT_1V8) {
+		err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4C40 | 0x24);
+		if (err < 0)
+			return err;
+	} else {
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 static const struct pcr_ops rts5209_pcr_ops = {
 	.extra_init_hw = rts5209_extra_init_hw,
 	.optimize_phy = rts5209_optimize_phy,
@@ -153,7 +172,9 @@ static const struct pcr_ops rts5209_pcr_ops = {
 	.disable_auto_blink = rts5209_disable_auto_blink,
 	.card_power_on = rts5209_card_power_on,
 	.card_power_off = rts5209_card_power_off,
+	.switch_output_voltage = rts5209_switch_output_voltage,
 	.cd_deglitch = NULL,
+	.conv_clk_and_div_n = NULL,
 };
 
 /* SD Pull Control Enable: