xen-netback: always fully coalesce guest Rx packets

Always fully coalesce guest Rx packets into the minimum number of ring
slots.  Reducing the number of slots per packet has significant
performance benefits when receiving off-host traffic.

Results from XenServer's performance benchmarks:

                         Baseline    Full coalesce
Interhost VM receive      7.2 Gb/s   11 Gb/s
Interhost aggregate      24 Gb/s     24 Gb/s
Intrahost single stream  14 Gb/s     14 Gb/s
Intrahost aggregate      34 Gb/s     34 Gb/s

However, this can increase the number of grant ops per packet which
decreases performance of backend (dom0) to VM traffic (by ~10%)
/unless/ grant copy has been optimized for adjacent ops with the same
source or destination (see "grant-table: defer releasing pages
acquired in a grant copy"[1] expected in Xen 4.6).

[1] http://lists.xen.org/archives/html/xen-devel/2015-01/msg01118.html

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/xen-netback/common.h

@@ -251,7 +251,6 @@ struct xenvif {
 struct xenvif_rx_cb {
 	unsigned long expires;
 	int meta_slots_used;
-	bool full_coalesce;
 };
 
 #define XENVIF_RX_CB(skb) ((struct xenvif_rx_cb *)(skb)->cb)

drivers/net/xen-netback/netback.c

@@ -233,51 +233,6 @@ static void xenvif_rx_queue_drop_expired(struct xenvif_queue *queue)
 	}
 }
 
-/*
- * Returns true if we should start a new receive buffer instead of
- * adding 'size' bytes to a buffer which currently contains 'offset'
- * bytes.
- */
-static bool start_new_rx_buffer(int offset, unsigned long size, int head,
-				bool full_coalesce)
-{
-	/* simple case: we have completely filled the current buffer. */
-	if (offset == MAX_BUFFER_OFFSET)
-		return true;
-
-	/*
-	 * complex case: start a fresh buffer if the current frag
-	 * would overflow the current buffer but only if:
-	 *     (i)   this frag would fit completely in the next buffer
-	 * and (ii)  there is already some data in the current buffer
-	 * and (iii) this is not the head buffer.
-	 * and (iv)  there is no need to fully utilize the buffers
-	 *
-	 * Where:
-	 * - (i) stops us splitting a frag into two copies
-	 *   unless the frag is too large for a single buffer.
-	 * - (ii) stops us from leaving a buffer pointlessly empty.
-	 * - (iii) stops us leaving the first buffer
-	 *   empty. Strictly speaking this is already covered
-	 *   by (ii) but is explicitly checked because
-	 *   netfront relies on the first buffer being
-	 *   non-empty and can crash otherwise.
-	 * - (iv) is needed for skbs which can use up more than MAX_SKB_FRAGS
-	 *   slot
-	 *
-	 * This means we will effectively linearise small
-	 * frags but do not needlessly split large buffers
-	 * into multiple copies tend to give large frags their
-	 * own buffers as before.
-	 */
-	BUG_ON(size > MAX_BUFFER_OFFSET);
-	if ((offset + size > MAX_BUFFER_OFFSET) && offset && !head &&
-	    !full_coalesce)
-		return true;
-
-	return false;
-}
-
 struct netrx_pending_operations {
 	unsigned copy_prod, copy_cons;
 	unsigned meta_prod, meta_cons;
@@ -336,24 +291,13 @@ static void xenvif_gop_frag_copy(struct xenvif_queue *queue, struct sk_buff *skb
 		BUG_ON(offset >= PAGE_SIZE);
 		BUG_ON(npo->copy_off > MAX_BUFFER_OFFSET);
 
-		bytes = PAGE_SIZE - offset;
+		if (npo->copy_off == MAX_BUFFER_OFFSET)
+			meta = get_next_rx_buffer(queue, npo);
 
+		bytes = PAGE_SIZE - offset;
 		if (bytes > size)
 			bytes = size;
 
-		if (start_new_rx_buffer(npo->copy_off,
-					bytes,
-					*head,
-					XENVIF_RX_CB(skb)->full_coalesce)) {
-			/*
-			 * Netfront requires there to be some data in the head
-			 * buffer.
-			 */
-			BUG_ON(*head);
-
-			meta = get_next_rx_buffer(queue, npo);
-		}
-
 		if (npo->copy_off + bytes > MAX_BUFFER_OFFSET)
 			bytes = MAX_BUFFER_OFFSET - npo->copy_off;
 
@@ -652,60 +596,15 @@ static void xenvif_rx_action(struct xenvif_queue *queue)
 
 	while (xenvif_rx_ring_slots_available(queue, XEN_NETBK_RX_SLOTS_MAX)
 	       && (skb = xenvif_rx_dequeue(queue)) != NULL) {
-		RING_IDX max_slots_needed;
 		RING_IDX old_req_cons;
 		RING_IDX ring_slots_used;
-		int i;
 
 		queue->last_rx_time = jiffies;
 
-		/* We need a cheap worse case estimate for the number of
-		 * slots we'll use.
-		 */
-
-		max_slots_needed = DIV_ROUND_UP(offset_in_page(skb->data) +
-						skb_headlen(skb),
-						PAGE_SIZE);
-		for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
-			unsigned int size;
-			unsigned int offset;
-
-			size = skb_frag_size(&skb_shinfo(skb)->frags[i]);
-			offset = skb_shinfo(skb)->frags[i].page_offset;
-
-			/* For a worse-case estimate we need to factor in
-			 * the fragment page offset as this will affect the
-			 * number of times xenvif_gop_frag_copy() will
-			 * call start_new_rx_buffer().
-			 */
-			max_slots_needed += DIV_ROUND_UP(offset + size,
-							 PAGE_SIZE);
-		}
-
-		/* To avoid the estimate becoming too pessimal for some
-		 * frontends that limit posted rx requests, cap the estimate
-		 * at MAX_SKB_FRAGS. In this case netback will fully coalesce
-		 * the skb into the provided slots.
-		 */
-		if (max_slots_needed > MAX_SKB_FRAGS) {
-			max_slots_needed = MAX_SKB_FRAGS;
-			XENVIF_RX_CB(skb)->full_coalesce = true;
-		} else {
-			XENVIF_RX_CB(skb)->full_coalesce = false;
-		}
-
-		/* We may need one more slot for GSO metadata */
-		if (skb_is_gso(skb) &&
-		   (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV4 ||
-		    skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6))
-			max_slots_needed++;
-
 		old_req_cons = queue->rx.req_cons;
 		XENVIF_RX_CB(skb)->meta_slots_used = xenvif_gop_skb(skb, &npo, queue);
 		ring_slots_used = queue->rx.req_cons - old_req_cons;
 
-		BUG_ON(ring_slots_used > max_slots_needed);
-
 		__skb_queue_tail(&rxq, skb);
 	}