mwifiex: verbose logging for association failure messages

This patch adds more detailed information about association failures
 - reason and states.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/mwifiex/fw.h

@@ -419,8 +419,12 @@ enum P2P_MODES {
 #define HS_CFG_COND_MAC_EVENT		0x00000004
 #define HS_CFG_COND_MULTICAST_DATA	0x00000008
 
-#define MWIFIEX_TIMEOUT_FOR_AP_RESP		0xfffc
-#define MWIFIEX_STATUS_CODE_AUTH_TIMEOUT	2
+#define CONNECT_ERR_AUTH_ERR_STA_FAILURE	0xFFFB
+#define CONNECT_ERR_ASSOC_ERR_TIMEOUT		0xFFFC
+#define CONNECT_ERR_ASSOC_ERR_AUTH_REFUSED	0xFFFD
+#define CONNECT_ERR_AUTH_MSG_UNHANDLED		0xFFFE
+#define CONNECT_ERR_STA_FAILURE			0xFFFF
+
 
 #define CMD_F_HOSTCMD           (1 << 0)
 #define CMD_F_CANCELED          (1 << 1)
@@ -1151,6 +1155,13 @@ enum SNMP_MIB_INDEX {
 	DOT11H_I = 10,
 };
 
+enum mwifiex_assocmd_failurepoint {
+	MWIFIEX_ASSOC_CMD_SUCCESS = 0,
+	MWIFIEX_ASSOC_CMD_FAILURE_ASSOC,
+	MWIFIEX_ASSOC_CMD_FAILURE_AUTH,
+	MWIFIEX_ASSOC_CMD_FAILURE_JOIN
+};
+
 #define MAX_SNMP_BUF_SIZE   128
 
 struct host_cmd_ds_802_11_snmp_mib {

drivers/net/wireless/mwifiex/join.c

@@ -556,6 +556,23 @@ int mwifiex_cmd_802_11_associate(struct mwifiex_private *priv,
 	return 0;
 }
 
+static const char *assoc_failure_reason_to_str(u16 cap_info)
+{
+	switch (cap_info) {
+	case CONNECT_ERR_AUTH_ERR_STA_FAILURE:
+		return "CONNECT_ERR_AUTH_ERR_STA_FAILURE";
+	case CONNECT_ERR_AUTH_MSG_UNHANDLED:
+		return "CONNECT_ERR_AUTH_MSG_UNHANDLED";
+	case CONNECT_ERR_ASSOC_ERR_TIMEOUT:
+		return "CONNECT_ERR_ASSOC_ERR_TIMEOUT";
+	case CONNECT_ERR_ASSOC_ERR_AUTH_REFUSED:
+		return "CONNECT_ERR_ASSOC_ERR_AUTH_REFUSED";
+	case CONNECT_ERR_STA_FAILURE:
+		return "CONNECT_ERR_STA_FAILURE";
+	}
+
+	return "Unknown connect failure";
+}
 /*
  * Association firmware command response handler
  *
@@ -656,11 +673,18 @@ int mwifiex_ret_802_11_associate(struct mwifiex_private *priv,
 			    status_code, cap_info,
 			    le16_to_cpu(assoc_rsp->a_id));
 
-		if (cap_info == MWIFIEX_TIMEOUT_FOR_AP_RESP) {
-			if (status_code == MWIFIEX_STATUS_CODE_AUTH_TIMEOUT)
+		mwifiex_dbg(priv->adapter, ERROR, "assoc failure: reason %s\n",
+			    assoc_failure_reason_to_str(cap_info));
+		if (cap_info == CONNECT_ERR_ASSOC_ERR_TIMEOUT) {
+			if (status_code == MWIFIEX_ASSOC_CMD_FAILURE_AUTH) {
 				ret = WLAN_STATUS_AUTH_TIMEOUT;
-			else
+				mwifiex_dbg(priv->adapter, ERROR,
+					    "ASSOC_RESP: AUTH timeout\n");
+			} else {
 				ret = WLAN_STATUS_UNSPECIFIED_FAILURE;
+				mwifiex_dbg(priv->adapter, ERROR,
+					    "ASSOC_RESP: UNSPECIFIED failure\n");
+			}
 		} else {
 			ret = status_code;
 		}