[media] cx231xx: fix i2c debug prints

Do not shift the already 7bit i2c address.
Print a message also for write+read transactions.
For write+read, print the read buffer correctly instead of using the write
buffer.

Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

drivers/media/usb/cx231xx/cx231xx-i2c.c

@@ -371,9 +371,9 @@ static int cx231xx_i2c_xfer(struct i2c_adapter *i2c_adap,
 	mutex_lock(&dev->i2c_lock);
 	for (i = 0; i < num; i++) {
 
-		addr = msgs[i].addr >> 1;
+		addr = msgs[i].addr;
 
-		dprintk2(2, "%s %s addr=%x len=%d:",
+		dprintk2(2, "%s %s addr=0x%x len=%d:",
 			 (msgs[i].flags & I2C_M_RD) ? "read" : "write",
 			 i == num - 1 ? "stop" : "nonstop", addr, msgs[i].len);
 		if (!msgs[i].len) {
@@ -395,13 +395,21 @@ static int cx231xx_i2c_xfer(struct i2c_adapter *i2c_adap,
 		} else if (i + 1 < num && (msgs[i + 1].flags & I2C_M_RD) &&
 			   msgs[i].addr == msgs[i + 1].addr
 			   && (msgs[i].len <= 2) && (bus->nr < 3)) {
+			/* write bytes */
+			if (i2c_debug >= 2) {
+				for (byte = 0; byte < msgs[i].len; byte++)
+					printk(" %02x", msgs[i].buf[byte]);
+			}
 			/* read bytes */
+			dprintk2(2, "plus %s %s addr=0x%x len=%d:",
+				(msgs[i+1].flags & I2C_M_RD) ? "read" : "write",
+				i+1 == num - 1 ? "stop" : "nonstop", addr, msgs[i+1].len);
 			rc = cx231xx_i2c_recv_bytes_with_saddr(i2c_adap,
 							       &msgs[i],
 							       &msgs[i + 1]);
 			if (i2c_debug >= 2) {
-				for (byte = 0; byte < msgs[i].len; byte++)
-					printk(" %02x", msgs[i].buf[byte]);
+				for (byte = 0; byte < msgs[i+1].len; byte++)
+					printk(" %02x", msgs[i+1].buf[byte]);
 			}
 			i++;
 		} else {