Merge branch 'ib-move-axp209' into devel

Documentation/devicetree/bindings/gpio/gpio-axp209.txt

@@ -1,10 +1,17 @@
-AXP209 GPIO controller
+AXP209 GPIO & pinctrl controller
 
 This driver follows the usual GPIO bindings found in
 Documentation/devicetree/bindings/gpio/gpio.txt
 
+This driver follows the usual pinctrl bindings found in
+Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+This driver employs the per-pin muxing pattern.
+
 Required properties:
-- compatible: Should be "x-powers,axp209-gpio"
+- compatible: Should be one of:
+	- "x-powers,axp209-gpio"
+	- "x-powers,axp813-gpio"
 - #gpio-cells: Should be two. The first cell is the pin number and the
   second is the GPIO flags.
 - gpio-controller: Marks the device node as a GPIO controller.
@@ -28,3 +35,41 @@ axp209: pmic@34 {
 		#gpio-cells = <2>;
 	};
 };
+
+The GPIOs can be muxed to other functions and therefore, must be a subnode of
+axp_gpio.
+
+Example:
+
+&axp_gpio {
+	gpio0_adc: gpio0-adc {
+		pins = "GPIO0";
+		function = "adc";
+	};
+};
+
+&example_node {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio0_adc>;
+};
+
+GPIOs and their functions
+-------------------------
+
+Each GPIO is independent from the other (i.e. GPIO0 in gpio_in function does
+not force GPIO1 and GPIO2 to be in gpio_in function as well).
+
+axp209
+------
+GPIO	|	Functions
+------------------------
+GPIO0	|	gpio_in, gpio_out, ldo, adc
+GPIO1	|	gpio_in, gpio_out, ldo, adc
+GPIO2	|	gpio_in, gpio_out
+
+axp813
+------
+GPIO	|	Functions
+------------------------
+GPIO0	|	gpio_in, gpio_out, ldo, adc
+GPIO1	|	gpio_in, gpio_out, ldo

drivers/gpio/Kconfig

@@ -122,12 +122,6 @@ config GPIO_ATH79
 	  Select this option to enable GPIO driver for
 	  Atheros AR71XX/AR724X/AR913X SoC devices.
 
-config GPIO_AXP209
-	tristate "X-Powers AXP209 PMIC GPIO Support"
-	depends on MFD_AXP20X
-	help
-	  Say yes to enable GPIO support for the AXP209 PMIC
-
 config GPIO_BCM_KONA
 	bool "Broadcom Kona GPIO"
 	depends on OF_GPIO && (ARCH_BCM_MOBILE || COMPILE_TEST)

drivers/gpio/Makefile

@@ -32,7 +32,6 @@ obj-$(CONFIG_GPIO_AMDPT)	+= gpio-amdpt.o
 obj-$(CONFIG_GPIO_ARIZONA)	+= gpio-arizona.o
 obj-$(CONFIG_GPIO_ATH79)	+= gpio-ath79.o
 obj-$(CONFIG_GPIO_ASPEED)	+= gpio-aspeed.o
-obj-$(CONFIG_GPIO_AXP209)	+= gpio-axp209.o
 obj-$(CONFIG_GPIO_BCM_KONA)	+= gpio-bcm-kona.o
 obj-$(CONFIG_GPIO_BD9571MWV)	+= gpio-bd9571mwv.o
 obj-$(CONFIG_GPIO_BRCMSTB)	+= gpio-brcmstb.o

drivers/gpio/gpio-axp209.c

@@ -1,188 +0,0 @@
-/*
- * AXP20x GPIO driver
- *
- * Copyright (C) 2016 Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under  the terms of the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/bitops.h>
-#include <linux/device.h>
-#include <linux/gpio/driver.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/mfd/axp20x.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/regmap.h>
-#include <linux/slab.h>
-
-#define AXP20X_GPIO_FUNCTIONS		0x7
-#define AXP20X_GPIO_FUNCTION_OUT_LOW	0
-#define AXP20X_GPIO_FUNCTION_OUT_HIGH	1
-#define AXP20X_GPIO_FUNCTION_INPUT	2
-
-struct axp20x_gpio {
-	struct gpio_chip	chip;
-	struct regmap		*regmap;
-};
-
-static int axp20x_gpio_get_reg(unsigned offset)
-{
-	switch (offset) {
-	case 0:
-		return AXP20X_GPIO0_CTRL;
-	case 1:
-		return AXP20X_GPIO1_CTRL;
-	case 2:
-		return AXP20X_GPIO2_CTRL;
-	}
-
-	return -EINVAL;
-}
-
-static int axp20x_gpio_input(struct gpio_chip *chip, unsigned offset)
-{
-	struct axp20x_gpio *gpio = gpiochip_get_data(chip);
-	int reg;
-
-	reg = axp20x_gpio_get_reg(offset);
-	if (reg < 0)
-		return reg;
-
-	return regmap_update_bits(gpio->regmap, reg,
-				  AXP20X_GPIO_FUNCTIONS,
-				  AXP20X_GPIO_FUNCTION_INPUT);
-}
-
-static int axp20x_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
-	struct axp20x_gpio *gpio = gpiochip_get_data(chip);
-	unsigned int val;
-	int ret;
-
-	ret = regmap_read(gpio->regmap, AXP20X_GPIO20_SS, &val);
-	if (ret)
-		return ret;
-
-	return !!(val & BIT(offset + 4));
-}
-
-static int axp20x_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
-{
-	struct axp20x_gpio *gpio = gpiochip_get_data(chip);
-	unsigned int val;
-	int reg, ret;
-
-	reg = axp20x_gpio_get_reg(offset);
-	if (reg < 0)
-		return reg;
-
-	ret = regmap_read(gpio->regmap, reg, &val);
-	if (ret)
-		return ret;
-
-	/*
-	 * This shouldn't really happen if the pin is in use already,
-	 * or if it's not in use yet, it doesn't matter since we're
-	 * going to change the value soon anyway. Default to output.
-	 */
-	if ((val & AXP20X_GPIO_FUNCTIONS) > 2)
-		return 0;
-
-	/*
-	 * The GPIO directions are the three lowest values.
-	 * 2 is input, 0 and 1 are output
-	 */
-	return val & 2;
-}
-
-static int axp20x_gpio_output(struct gpio_chip *chip, unsigned offset,
-			      int value)
-{
-	struct axp20x_gpio *gpio = gpiochip_get_data(chip);
-	int reg;
-
-	reg = axp20x_gpio_get_reg(offset);
-	if (reg < 0)
-		return reg;
-
-	return regmap_update_bits(gpio->regmap, reg,
-				  AXP20X_GPIO_FUNCTIONS,
-				  value ? AXP20X_GPIO_FUNCTION_OUT_HIGH
-				  : AXP20X_GPIO_FUNCTION_OUT_LOW);
-}
-
-static void axp20x_gpio_set(struct gpio_chip *chip, unsigned offset,
-			    int value)
-{
-	axp20x_gpio_output(chip, offset, value);
-}
-
-static int axp20x_gpio_probe(struct platform_device *pdev)
-{
-	struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
-	struct axp20x_gpio *gpio;
-	int ret;
-
-	if (!of_device_is_available(pdev->dev.of_node))
-		return -ENODEV;
-
-	if (!axp20x) {
-		dev_err(&pdev->dev, "Parent drvdata not set\n");
-		return -EINVAL;
-	}
-
-	gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
-	if (!gpio)
-		return -ENOMEM;
-
-	gpio->chip.base			= -1;
-	gpio->chip.can_sleep		= true;
-	gpio->chip.parent		= &pdev->dev;
-	gpio->chip.label		= dev_name(&pdev->dev);
-	gpio->chip.owner		= THIS_MODULE;
-	gpio->chip.get			= axp20x_gpio_get;
-	gpio->chip.get_direction	= axp20x_gpio_get_direction;
-	gpio->chip.set			= axp20x_gpio_set;
-	gpio->chip.direction_input	= axp20x_gpio_input;
-	gpio->chip.direction_output	= axp20x_gpio_output;
-	gpio->chip.ngpio		= 3;
-
-	gpio->regmap = axp20x->regmap;
-
-	ret = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio);
-	if (ret) {
-		dev_err(&pdev->dev, "Failed to register GPIO chip\n");
-		return ret;
-	}
-
-	dev_info(&pdev->dev, "AXP209 GPIO driver loaded\n");
-
-	return 0;
-}
-
-static const struct of_device_id axp20x_gpio_match[] = {
-	{ .compatible = "x-powers,axp209-gpio" },
-	{ }
-};
-MODULE_DEVICE_TABLE(of, axp20x_gpio_match);
-
-static struct platform_driver axp20x_gpio_driver = {
-	.probe		= axp20x_gpio_probe,
-	.driver = {
-		.name		= "axp20x-gpio",
-		.of_match_table	= axp20x_gpio_match,
-	},
-};
-
-module_platform_driver(axp20x_gpio_driver);
-
-MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>");
-MODULE_DESCRIPTION("AXP20x PMIC GPIO driver");
-MODULE_LICENSE("GPL");

drivers/pinctrl/Kconfig

@@ -63,6 +63,16 @@ config PINCTRL_AS3722
 	  open drain configuration for the GPIO pins of AS3722 devices. It also
 	  supports the GPIO functionality through gpiolib.
 
+config PINCTRL_AXP209
+	tristate "X-Powers AXP209 PMIC pinctrl and GPIO Support"
+	depends on MFD_AXP20X
+	help
+	  AXP PMICs provides multiple GPIOs that can be muxed for different
+	  functions. This driver bundles a pinctrl driver to select the function
+	  muxing and a GPIO driver to handle the GPIO when the GPIO function is
+	  selected.
+	  Say yes to enable pinctrl and GPIO support for the AXP209 PMIC
+
 config PINCTRL_BF54x
 	def_bool y if BF54x
 	select PINCTRL_ADI2

drivers/pinctrl/Makefile

@@ -11,6 +11,7 @@ obj-$(CONFIG_GENERIC_PINCONF)	+= pinconf-generic.o
 obj-$(CONFIG_PINCTRL_ADI2)	+= pinctrl-adi2.o
 obj-$(CONFIG_PINCTRL_ARTPEC6)	+= pinctrl-artpec6.o
 obj-$(CONFIG_PINCTRL_AS3722)	+= pinctrl-as3722.o
+obj-$(CONFIG_PINCTRL_AXP209)	+= pinctrl-axp209.o
 obj-$(CONFIG_PINCTRL_BF54x)	+= pinctrl-adi2-bf54x.o
 obj-$(CONFIG_PINCTRL_BF60x)	+= pinctrl-adi2-bf60x.o
 obj-$(CONFIG_PINCTRL_AT91)	+= pinctrl-at91.o

drivers/pinctrl/pinctrl-axp209.c

@@ -0,0 +1,476 @@
+/*
+ * AXP20x pinctrl and GPIO driver
+ *
+ * Copyright (C) 2016 Maxime Ripard <maxime.ripard@free-electrons.com>
+ * Copyright (C) 2017 Quentin Schulz <quentin.schulz@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under  the terms of the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/gpio/driver.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/axp20x.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define AXP20X_GPIO_FUNCTIONS		0x7
+#define AXP20X_GPIO_FUNCTION_OUT_LOW	0
+#define AXP20X_GPIO_FUNCTION_OUT_HIGH	1
+#define AXP20X_GPIO_FUNCTION_INPUT	2
+
+#define AXP20X_FUNC_GPIO_OUT		0
+#define AXP20X_FUNC_GPIO_IN		1
+#define AXP20X_FUNC_LDO			2
+#define AXP20X_FUNC_ADC			3
+#define AXP20X_FUNCS_NB			4
+
+#define AXP20X_MUX_GPIO_OUT		0
+#define AXP20X_MUX_GPIO_IN		BIT(1)
+#define AXP20X_MUX_ADC			BIT(2)
+
+#define AXP813_MUX_ADC			(BIT(2) | BIT(0))
+
+struct axp20x_pctrl_desc {
+	const struct pinctrl_pin_desc	*pins;
+	unsigned int			npins;
+	/* Stores the pins supporting LDO function. Bit offset is pin number. */
+	u8				ldo_mask;
+	/* Stores the pins supporting ADC function. Bit offset is pin number. */
+	u8				adc_mask;
+	u8				gpio_status_offset;
+	u8				adc_mux;
+};
+
+struct axp20x_pinctrl_function {
+	const char	*name;
+	unsigned int	muxval;
+	const char	**groups;
+	unsigned int	ngroups;
+};
+
+struct axp20x_pctl {
+	struct gpio_chip	chip;
+	struct regmap		*regmap;
+	struct pinctrl_dev			*pctl_dev;
+	struct device				*dev;
+	const struct axp20x_pctrl_desc		*desc;
+	struct axp20x_pinctrl_function		funcs[AXP20X_FUNCS_NB];
+};
+
+static const struct pinctrl_pin_desc axp209_pins[] = {
+	PINCTRL_PIN(0, "GPIO0"),
+	PINCTRL_PIN(1, "GPIO1"),
+	PINCTRL_PIN(2, "GPIO2"),
+};
+
+static const struct pinctrl_pin_desc axp813_pins[] = {
+	PINCTRL_PIN(0, "GPIO0"),
+	PINCTRL_PIN(1, "GPIO1"),
+};
+
+static const struct axp20x_pctrl_desc axp20x_data = {
+	.pins	= axp209_pins,
+	.npins	= ARRAY_SIZE(axp209_pins),
+	.ldo_mask = BIT(0) | BIT(1),
+	.adc_mask = BIT(0) | BIT(1),
+	.gpio_status_offset = 4,
+	.adc_mux = AXP20X_MUX_ADC,
+};
+
+static const struct axp20x_pctrl_desc axp813_data = {
+	.pins	= axp813_pins,
+	.npins	= ARRAY_SIZE(axp813_pins),
+	.ldo_mask = BIT(0) | BIT(1),
+	.adc_mask = BIT(0),
+	.gpio_status_offset = 0,
+	.adc_mux = AXP813_MUX_ADC,
+};
+
+static int axp20x_gpio_get_reg(unsigned int offset)
+{
+	switch (offset) {
+	case 0:
+		return AXP20X_GPIO0_CTRL;
+	case 1:
+		return AXP20X_GPIO1_CTRL;
+	case 2:
+		return AXP20X_GPIO2_CTRL;
+	}
+
+	return -EINVAL;
+}
+
+static int axp20x_gpio_input(struct gpio_chip *chip, unsigned int offset)
+{
+	return pinctrl_gpio_direction_input(chip->base + offset);
+}
+
+static int axp20x_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct axp20x_pctl *pctl = gpiochip_get_data(chip);
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(pctl->regmap, AXP20X_GPIO20_SS, &val);
+	if (ret)
+		return ret;
+
+	return !!(val & BIT(offset + pctl->desc->gpio_status_offset));
+}
+
+static int axp20x_gpio_get_direction(struct gpio_chip *chip,
+				     unsigned int offset)
+{
+	struct axp20x_pctl *pctl = gpiochip_get_data(chip);
+	unsigned int val;
+	int reg, ret;
+
+	reg = axp20x_gpio_get_reg(offset);
+	if (reg < 0)
+		return reg;
+
+	ret = regmap_read(pctl->regmap, reg, &val);
+	if (ret)
+		return ret;
+
+	/*
+	 * This shouldn't really happen if the pin is in use already,
+	 * or if it's not in use yet, it doesn't matter since we're
+	 * going to change the value soon anyway. Default to output.
+	 */
+	if ((val & AXP20X_GPIO_FUNCTIONS) > 2)
+		return 0;
+
+	/*
+	 * The GPIO directions are the three lowest values.
+	 * 2 is input, 0 and 1 are output
+	 */
+	return val & 2;
+}
+
+static int axp20x_gpio_output(struct gpio_chip *chip, unsigned int offset,
+			      int value)
+{
+	chip->set(chip, offset, value);
+
+	return 0;
+}
+
+static void axp20x_gpio_set(struct gpio_chip *chip, unsigned int offset,
+			    int value)
+{
+	struct axp20x_pctl *pctl = gpiochip_get_data(chip);
+	int reg;
+
+	reg = axp20x_gpio_get_reg(offset);
+	if (reg < 0)
+		return;
+
+	regmap_update_bits(pctl->regmap, reg,
+			   AXP20X_GPIO_FUNCTIONS,
+			   value ? AXP20X_GPIO_FUNCTION_OUT_HIGH :
+			   AXP20X_GPIO_FUNCTION_OUT_LOW);
+}
+
+static int axp20x_pmx_set(struct pinctrl_dev *pctldev, unsigned int offset,
+			  u8 config)
+{
+	struct axp20x_pctl *pctl = pinctrl_dev_get_drvdata(pctldev);
+	int reg;
+
+	reg = axp20x_gpio_get_reg(offset);
+	if (reg < 0)
+		return reg;
+
+	return regmap_update_bits(pctl->regmap, reg, AXP20X_GPIO_FUNCTIONS,
+				  config);
+}
+
+static int axp20x_pmx_func_cnt(struct pinctrl_dev *pctldev)
+{
+	struct axp20x_pctl *pctl = pinctrl_dev_get_drvdata(pctldev);
+
+	return ARRAY_SIZE(pctl->funcs);
+}
+
+static const char *axp20x_pmx_func_name(struct pinctrl_dev *pctldev,
+					unsigned int selector)
+{
+	struct axp20x_pctl *pctl = pinctrl_dev_get_drvdata(pctldev);
+
+	return pctl->funcs[selector].name;
+}
+
+static int axp20x_pmx_func_groups(struct pinctrl_dev *pctldev,
+				  unsigned int selector,
+				  const char * const **groups,
+				  unsigned int *num_groups)
+{
+	struct axp20x_pctl *pctl = pinctrl_dev_get_drvdata(pctldev);
+
+	*groups = pctl->funcs[selector].groups;
+	*num_groups = pctl->funcs[selector].ngroups;
+
+	return 0;
+}
+
+static int axp20x_pmx_set_mux(struct pinctrl_dev *pctldev,
+			      unsigned int function, unsigned int group)
+{
+	struct axp20x_pctl *pctl = pinctrl_dev_get_drvdata(pctldev);
+	unsigned int mask;
+
+	/* Every pin supports GPIO_OUT and GPIO_IN functions */
+	if (function <= AXP20X_FUNC_GPIO_IN)
+		return axp20x_pmx_set(pctldev, group,
+				      pctl->funcs[function].muxval);
+
+	if (function == AXP20X_FUNC_LDO)
+		mask = pctl->desc->ldo_mask;
+	else
+		mask = pctl->desc->adc_mask;
+
+	if (!(BIT(group) & mask))
+		return -EINVAL;
+
+	/*
+	 * We let the regulator framework handle the LDO muxing as muxing bits
+	 * are basically also regulators on/off bits. It's better not to enforce
+	 * any state of the regulator when selecting LDO mux so that we don't
+	 * interfere with the regulator driver.
+	 */
+	if (function == AXP20X_FUNC_LDO)
+		return 0;
+
+	return axp20x_pmx_set(pctldev, group, pctl->funcs[function].muxval);
+}
+
+static int axp20x_pmx_gpio_set_direction(struct pinctrl_dev *pctldev,
+					 struct pinctrl_gpio_range *range,
+					 unsigned int offset, bool input)
+{
+	struct axp20x_pctl *pctl = pinctrl_dev_get_drvdata(pctldev);
+
+	if (input)
+		return axp20x_pmx_set(pctldev, offset,
+				      pctl->funcs[AXP20X_FUNC_GPIO_IN].muxval);
+
+	return axp20x_pmx_set(pctldev, offset,
+			      pctl->funcs[AXP20X_FUNC_GPIO_OUT].muxval);
+}
+
+static const struct pinmux_ops axp20x_pmx_ops = {
+	.get_functions_count	= axp20x_pmx_func_cnt,
+	.get_function_name	= axp20x_pmx_func_name,
+	.get_function_groups	= axp20x_pmx_func_groups,
+	.set_mux		= axp20x_pmx_set_mux,
+	.gpio_set_direction	= axp20x_pmx_gpio_set_direction,
+	.strict			= true,
+};
+
+static int axp20x_groups_cnt(struct pinctrl_dev *pctldev)
+{
+	struct axp20x_pctl *pctl = pinctrl_dev_get_drvdata(pctldev);
+
+	return pctl->desc->npins;
+}
+
+static int axp20x_group_pins(struct pinctrl_dev *pctldev, unsigned int selector,
+			     const unsigned int **pins, unsigned int *num_pins)
+{
+	struct axp20x_pctl *pctl = pinctrl_dev_get_drvdata(pctldev);
+
+	*pins = (unsigned int *)&pctl->desc->pins[selector];
+	*num_pins = 1;
+
+	return 0;
+}
+
+static const char *axp20x_group_name(struct pinctrl_dev *pctldev,
+				     unsigned int selector)
+{
+	struct axp20x_pctl *pctl = pinctrl_dev_get_drvdata(pctldev);
+
+	return pctl->desc->pins[selector].name;
+}
+
+static const struct pinctrl_ops axp20x_pctrl_ops = {
+	.dt_node_to_map		= pinconf_generic_dt_node_to_map_group,
+	.dt_free_map		= pinconf_generic_dt_free_map,
+	.get_groups_count	= axp20x_groups_cnt,
+	.get_group_name		= axp20x_group_name,
+	.get_group_pins		= axp20x_group_pins,
+};
+
+static void axp20x_funcs_groups_from_mask(struct device *dev, unsigned int mask,
+					  unsigned int mask_len,
+					  struct axp20x_pinctrl_function *func,
+					  const struct pinctrl_pin_desc *pins)
+{
+	unsigned long int mask_cpy = mask;
+	const char **group;
+	unsigned int ngroups = hweight8(mask);
+	int bit;
+
+	func->ngroups = ngroups;
+	if (func->ngroups > 0) {
+		func->groups = devm_kzalloc(dev, ngroups * sizeof(const char *),
+					    GFP_KERNEL);
+		group = func->groups;
+		for_each_set_bit(bit, &mask_cpy, mask_len) {
+			*group = pins[bit].name;
+			group++;
+		}
+	}
+}
+
+static void axp20x_build_funcs_groups(struct platform_device *pdev)
+{
+	struct axp20x_pctl *pctl = platform_get_drvdata(pdev);
+	int i, pin, npins = pctl->desc->npins;
+
+	pctl->funcs[AXP20X_FUNC_GPIO_OUT].name = "gpio_out";
+	pctl->funcs[AXP20X_FUNC_GPIO_OUT].muxval = AXP20X_MUX_GPIO_OUT;
+	pctl->funcs[AXP20X_FUNC_GPIO_IN].name = "gpio_in";
+	pctl->funcs[AXP20X_FUNC_GPIO_IN].muxval = AXP20X_MUX_GPIO_IN;
+	pctl->funcs[AXP20X_FUNC_LDO].name = "ldo";
+	/*
+	 * Muxval for LDO is useless as we won't use it.
+	 * See comment in axp20x_pmx_set_mux.
+	 */
+	pctl->funcs[AXP20X_FUNC_ADC].name = "adc";
+	pctl->funcs[AXP20X_FUNC_ADC].muxval = pctl->desc->adc_mux;
+
+	/* Every pin supports GPIO_OUT and GPIO_IN functions */
+	for (i = 0; i <= AXP20X_FUNC_GPIO_IN; i++) {
+		pctl->funcs[i].ngroups = npins;
+		pctl->funcs[i].groups = devm_kzalloc(&pdev->dev,
+						     npins * sizeof(char *),
+						     GFP_KERNEL);
+		for (pin = 0; pin < npins; pin++)
+			pctl->funcs[i].groups[pin] = pctl->desc->pins[pin].name;
+	}
+
+	axp20x_funcs_groups_from_mask(&pdev->dev, pctl->desc->ldo_mask,
+				      npins, &pctl->funcs[AXP20X_FUNC_LDO],
+				      pctl->desc->pins);
+
+	axp20x_funcs_groups_from_mask(&pdev->dev, pctl->desc->adc_mask,
+				      npins, &pctl->funcs[AXP20X_FUNC_ADC],
+				      pctl->desc->pins);
+}
+
+static const struct of_device_id axp20x_pctl_match[] = {
+	{ .compatible = "x-powers,axp209-gpio", .data = &axp20x_data, },
+	{ .compatible = "x-powers,axp813-gpio", .data = &axp813_data, },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, axp20x_pctl_match);
+
+static int axp20x_pctl_probe(struct platform_device *pdev)
+{
+	struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
+	struct axp20x_pctl *pctl;
+	struct device *dev = &pdev->dev;
+	struct pinctrl_desc *pctrl_desc;
+	int ret;
+
+	if (!of_device_is_available(pdev->dev.of_node))
+		return -ENODEV;
+
+	if (!axp20x) {
+		dev_err(&pdev->dev, "Parent drvdata not set\n");
+		return -EINVAL;
+	}
+
+	pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
+	if (!pctl)
+		return -ENOMEM;
+
+	pctl->chip.base			= -1;
+	pctl->chip.can_sleep		= true;
+	pctl->chip.request		= gpiochip_generic_request;
+	pctl->chip.free			= gpiochip_generic_free;
+	pctl->chip.parent		= &pdev->dev;
+	pctl->chip.label		= dev_name(&pdev->dev);
+	pctl->chip.owner		= THIS_MODULE;
+	pctl->chip.get			= axp20x_gpio_get;
+	pctl->chip.get_direction	= axp20x_gpio_get_direction;
+	pctl->chip.set			= axp20x_gpio_set;
+	pctl->chip.direction_input	= axp20x_gpio_input;
+	pctl->chip.direction_output	= axp20x_gpio_output;
+	pctl->chip.ngpio		= pctl->desc->npins;
+
+	pctl->desc = (struct axp20x_pctrl_desc *)of_device_get_match_data(dev);
+	pctl->regmap = axp20x->regmap;
+	pctl->dev = &pdev->dev;
+
+	platform_set_drvdata(pdev, pctl);
+
+	axp20x_build_funcs_groups(pdev);
+
+	pctrl_desc = devm_kzalloc(&pdev->dev, sizeof(*pctrl_desc), GFP_KERNEL);
+	if (!pctrl_desc)
+		return -ENOMEM;
+
+	pctrl_desc->name = dev_name(&pdev->dev);
+	pctrl_desc->owner = THIS_MODULE;
+	pctrl_desc->pins = pctl->desc->pins;
+	pctrl_desc->npins = pctl->desc->npins;
+	pctrl_desc->pctlops = &axp20x_pctrl_ops;
+	pctrl_desc->pmxops = &axp20x_pmx_ops;
+
+	pctl->pctl_dev = devm_pinctrl_register(&pdev->dev, pctrl_desc, pctl);
+	if (IS_ERR(pctl->pctl_dev)) {
+		dev_err(&pdev->dev, "couldn't register pinctrl driver\n");
+		return PTR_ERR(pctl->pctl_dev);
+	}
+
+	ret = devm_gpiochip_add_data(&pdev->dev, &pctl->chip, pctl);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to register GPIO chip\n");
+		return ret;
+	}
+
+	ret = gpiochip_add_pin_range(&pctl->chip, dev_name(&pdev->dev),
+				     pctl->desc->pins->number,
+				     pctl->desc->pins->number,
+				     pctl->desc->npins);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add pin range\n");
+		return ret;
+	}
+
+	dev_info(&pdev->dev, "AXP209 pinctrl and GPIO driver loaded\n");
+
+	return 0;
+}
+
+static struct platform_driver axp20x_pctl_driver = {
+	.probe		= axp20x_pctl_probe,
+	.driver = {
+		.name		= "axp20x-gpio",
+		.of_match_table	= axp20x_pctl_match,
+	},
+};
+
+module_platform_driver(axp20x_pctl_driver);
+
+MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>");
+MODULE_AUTHOR("Quentin Schulz <quentin.schulz@free-electrons.com>");
+MODULE_DESCRIPTION("AXP20x PMIC pinctrl and GPIO driver");
+MODULE_LICENSE("GPL");