Merge branch 'akpm' (fixes from Andrew Morton)

Merge patches from Andrew Morton:
 "22 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (22 commits)
  kexec: purgatory: add clean-up for purgatory directory
  Documentation/kdump/kdump.txt: add ARM description
  flush_icache_range: export symbol to fix build errors
  tools: selftests: fix build issue with make kselftests target
  ocfs2: quorum: add a log for node not fenced
  ocfs2: o2net: set tcp user timeout to max value
  ocfs2: o2net: don't shutdown connection when idle timeout
  ocfs2: do not write error flag to user structure we cannot copy from/to
  x86/purgatory: use approprate -m64/-32 build flag for arch/x86/purgatory
  drivers/rtc/rtc-s5m.c: re-add support for devices without irq specified
  xattr: fix check for simultaneous glibc header inclusion
  kexec: remove CONFIG_KEXEC dependency on crypto
  kexec: create a new config option CONFIG_KEXEC_FILE for new syscall
  x86,mm: fix pte_special versus pte_numa
  hugetlb_cgroup: use lockdep_assert_held rather than spin_is_locked
  mm/zpool: use prefixed module loading
  zram: fix incorrect stat with failed_reads
  lib: turn CONFIG_STACKTRACE into an actual option.
  mm: actually clear pmd_numa before invalidating
  memblock, memhotplug: fix wrong type in memblock_find_in_range_node().
  ...

Documentation/kdump/kdump.txt

@@ -18,7 +18,7 @@ memory image to a dump file on the local disk, or across the network to
 a remote system.
 
 Kdump and kexec are currently supported on the x86, x86_64, ppc64, ia64,
-and s390x architectures.
+s390x and arm architectures.
 
 When the system kernel boots, it reserves a small section of memory for
 the dump-capture kernel. This ensures that ongoing Direct Memory Access
@@ -112,7 +112,7 @@ There are two possible methods of using Kdump.
 2) Or use the system kernel binary itself as dump-capture kernel and there is
    no need to build a separate dump-capture kernel. This is possible
    only with the architectures which support a relocatable kernel. As
-   of today, i386, x86_64, ppc64 and ia64 architectures support relocatable
+   of today, i386, x86_64, ppc64, ia64 and arm architectures support relocatable
    kernel.
 
 Building a relocatable kernel is advantageous from the point of view that
@@ -241,6 +241,13 @@ Dump-capture kernel config options (Arch Dependent, ia64)
   kernel will be aligned to 64Mb, so if the start address is not then
   any space below the alignment point will be wasted.
 
+Dump-capture kernel config options (Arch Dependent, arm)
+----------------------------------------------------------
+
+-   To use a relocatable kernel,
+    Enable "AUTO_ZRELADDR" support under "Boot" options:
+
+    AUTO_ZRELADDR=y
 
 Extended crashkernel syntax
 ===========================
@@ -256,6 +263,10 @@ The syntax is:
     crashkernel=<range1>:<size1>[,<range2>:<size2>,...][@offset]
     range=start-[end]
 
+Please note, on arm, the offset is required.
+    crashkernel=<range1>:<size1>[,<range2>:<size2>,...]@offset
+    range=start-[end]
+
     'start' is inclusive and 'end' is exclusive.
 
 For example:
@@ -296,6 +307,12 @@ Boot into System Kernel
    on the memory consumption of the kdump system. In general this is not
    dependent on the memory size of the production system.
 
+   On arm, use "crashkernel=Y@X". Note that the start address of the kernel
+   will be aligned to 128MiB (0x08000000), so if the start address is not then
+   any space below the alignment point may be overwritten by the dump-capture kernel,
+   which means it is possible that the vmcore is not that precise as expected.
+
+
 Load the Dump-capture Kernel
 ============================
 
@@ -315,7 +332,8 @@ For ia64:
 	- Use vmlinux or vmlinuz.gz
 For s390x:
 	- Use image or bzImage
-
+For arm:
+	- Use zImage
 
 If you are using a uncompressed vmlinux image then use following command
 to load dump-capture kernel.
@@ -331,6 +349,15 @@ to load dump-capture kernel.
    --initrd=<initrd-for-dump-capture-kernel> \
    --append="root=<root-dev> <arch-specific-options>"
 
+If you are using a compressed zImage, then use following command
+to load dump-capture kernel.
+
+   kexec --type zImage -p <dump-capture-kernel-bzImage> \
+   --initrd=<initrd-for-dump-capture-kernel> \
+   --dtb=<dtb-for-dump-capture-kernel> \
+   --append="root=<root-dev> <arch-specific-options>"
+
+
 Please note, that --args-linux does not need to be specified for ia64.
 It is planned to make this a no-op on that architecture, but for now
 it should be omitted
@@ -347,6 +374,9 @@ For ppc64:
 For s390x:
 	"1 maxcpus=1 cgroup_disable=memory"
 
+For arm:
+	"1 maxcpus=1 reset_devices"
+
 Notes on loading the dump-capture kernel:
 
 * By default, the ELF headers are stored in ELF64 format to support

arch/arc/mm/cache_arc700.c

@@ -581,6 +581,7 @@ void flush_icache_range(unsigned long kstart, unsigned long kend)
 		tot_sz -= sz;
 	}
 }
+EXPORT_SYMBOL(flush_icache_range);
 
 /*
  * General purpose helper to make I and D cache lines consistent.

arch/arm/Kconfig

@@ -1983,8 +1983,6 @@ config XIP_PHYS_ADDR
 config KEXEC
 	bool "Kexec system call (EXPERIMENTAL)"
 	depends on (!SMP || PM_SLEEP_SMP)
-	select CRYPTO
-	select CRYPTO_SHA256
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot

arch/hexagon/mm/cache.c

@@ -68,6 +68,7 @@ void flush_icache_range(unsigned long start, unsigned long end)
 	);
 	local_irq_restore(flags);
 }
+EXPORT_SYMBOL(flush_icache_range);
 
 void hexagon_clean_dcache_range(unsigned long start, unsigned long end)
 {

arch/ia64/Kconfig

@@ -549,8 +549,6 @@ source "drivers/sn/Kconfig"
 config KEXEC
 	bool "kexec system call"
 	depends on !IA64_HP_SIM && (!SMP || HOTPLUG_CPU)
-	select CRYPTO
-	select CRYPTO_SHA256
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot

arch/m68k/Kconfig

@@ -91,8 +91,6 @@ config MMU_SUN3
 config KEXEC
 	bool "kexec system call"
 	depends on M68KCLASSIC
-	select CRYPTO
-	select CRYPTO_SHA256
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot

arch/mips/Kconfig

@@ -2396,8 +2396,6 @@ source "kernel/Kconfig.preempt"
 
 config KEXEC
 	bool "Kexec system call"
-	select CRYPTO
-	select CRYPTO_SHA256
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot

arch/powerpc/Kconfig

@@ -399,8 +399,6 @@ config PPC64_SUPPORTS_MEMORY_FAILURE
 config KEXEC
 	bool "kexec system call"
 	depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP))
-	select CRYPTO
-	select CRYPTO_SHA256
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot

arch/s390/Kconfig

@@ -48,8 +48,6 @@ config ARCH_SUPPORTS_DEBUG_PAGEALLOC
 
 config KEXEC
 	def_bool y
-	select CRYPTO
-	select CRYPTO_SHA256
 
 config AUDIT_ARCH
 	def_bool y

arch/sh/Kconfig

@@ -598,8 +598,6 @@ source kernel/Kconfig.hz
 config KEXEC
 	bool "kexec system call (EXPERIMENTAL)"
 	depends on SUPERH32 && MMU
-	select CRYPTO
-	select CRYPTO_SHA256
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot

arch/sh/mm/cache.c

@@ -229,6 +229,7 @@ void flush_icache_range(unsigned long start, unsigned long end)
 
 	cacheop_on_each_cpu(local_flush_icache_range, (void *)&data, 1);
 }
+EXPORT_SYMBOL(flush_icache_range);
 
 void flush_icache_page(struct vm_area_struct *vma, struct page *page)
 {

arch/tile/Kconfig

@@ -191,8 +191,6 @@ source "kernel/Kconfig.hz"
 
 config KEXEC
 	bool "kexec system call"
-	select CRYPTO
-	select CRYPTO_SHA256
 	---help---
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot

arch/tile/kernel/smp.c

@@ -183,6 +183,7 @@ void flush_icache_range(unsigned long start, unsigned long end)
 		preempt_enable();
 	}
 }
+EXPORT_SYMBOL(flush_icache_range);
 
 
 /* Called when smp_send_reschedule() triggers IRQ_RESCHEDULE. */

arch/x86/Kbuild

@@ -17,6 +17,4 @@ obj-$(CONFIG_IA32_EMULATION) += ia32/
 obj-y += platform/
 obj-y += net/
 
-ifeq ($(CONFIG_X86_64),y)
-obj-$(CONFIG_KEXEC) += purgatory/
-endif
+obj-$(CONFIG_KEXEC_FILE) += purgatory/

arch/x86/Kconfig

@@ -1585,9 +1585,6 @@ source kernel/Kconfig.hz
 
 config KEXEC
 	bool "kexec system call"
-	select BUILD_BIN2C
-	select CRYPTO
-	select CRYPTO_SHA256
 	---help---
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot
@@ -1602,9 +1599,22 @@ config KEXEC
 	  interface is strongly in flux, so no good recommendation can be
 	  made.
 
+config KEXEC_FILE
+	bool "kexec file based system call"
+	select BUILD_BIN2C
+	depends on KEXEC
+	depends on X86_64
+	depends on CRYPTO=y
+	depends on CRYPTO_SHA256=y
+	---help---
+	  This is new version of kexec system call. This system call is
+	  file based and takes file descriptors as system call argument
+	  for kernel and initramfs as opposed to list of segments as
+	  accepted by previous system call.
+
 config KEXEC_VERIFY_SIG
 	bool "Verify kernel signature during kexec_file_load() syscall"
-	depends on KEXEC
+	depends on KEXEC_FILE
 	---help---
 	  This option makes kernel signature verification mandatory for
 	  kexec_file_load() syscall. If kernel is signature can not be

arch/x86/Makefile

@@ -184,11 +184,8 @@ archheaders:
 	$(Q)$(MAKE) $(build)=arch/x86/syscalls all
 
 archprepare:
-ifeq ($(CONFIG_KEXEC),y)
-# Build only for 64bit. No loaders for 32bit yet.
- ifeq ($(CONFIG_X86_64),y)
+ifeq ($(CONFIG_KEXEC_FILE),y)
 	$(Q)$(MAKE) $(build)=arch/x86/purgatory arch/x86/purgatory/kexec-purgatory.c
- endif
 endif
 
 ###
@@ -254,6 +251,7 @@ archclean:
 	$(Q)rm -rf $(objtree)/arch/x86_64
 	$(Q)$(MAKE) $(clean)=$(boot)
 	$(Q)$(MAKE) $(clean)=arch/x86/tools
+	$(Q)$(MAKE) $(clean)=arch/x86/purgatory
 
 PHONY += kvmconfig
 kvmconfig:

arch/x86/include/asm/pgtable.h

@@ -131,8 +131,13 @@ static inline int pte_exec(pte_t pte)
 
 static inline int pte_special(pte_t pte)
 {
-	return (pte_flags(pte) & (_PAGE_PRESENT|_PAGE_SPECIAL)) ==
-				 (_PAGE_PRESENT|_PAGE_SPECIAL);
+	/*
+	 * See CONFIG_NUMA_BALANCING pte_numa in include/asm-generic/pgtable.h.
+	 * On x86 we have _PAGE_BIT_NUMA == _PAGE_BIT_GLOBAL+1 ==
+	 * __PAGE_BIT_SOFTW1 == _PAGE_BIT_SPECIAL.
+	 */
+	return (pte_flags(pte) & _PAGE_SPECIAL) &&
+		(pte_flags(pte) & (_PAGE_PRESENT|_PAGE_PROTNONE));
 }
 
 static inline unsigned long pte_pfn(pte_t pte)

arch/x86/kernel/Makefile

@@ -71,6 +71,7 @@ obj-$(CONFIG_FTRACE_SYSCALLS)	+= ftrace.o
 obj-$(CONFIG_X86_TSC)		+= trace_clock.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec_$(BITS).o
 obj-$(CONFIG_KEXEC)		+= relocate_kernel_$(BITS).o crash.o
+obj-$(CONFIG_KEXEC_FILE)	+= kexec-bzimage64.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump_$(BITS).o
 obj-y				+= kprobes/
 obj-$(CONFIG_MODULES)		+= module.o
@@ -118,5 +119,4 @@ ifeq ($(CONFIG_X86_64),y)
 
 	obj-$(CONFIG_PCI_MMCONFIG)	+= mmconf-fam10h_64.o
 	obj-y				+= vsmp_64.o
-	obj-$(CONFIG_KEXEC)		+= kexec-bzimage64.o
 endif

arch/x86/kernel/crash.c

@@ -182,8 +182,7 @@ void native_machine_crash_shutdown(struct pt_regs *regs)
 	crash_save_cpu(regs, safe_smp_processor_id());
 }
 
-#ifdef CONFIG_X86_64
-
+#ifdef CONFIG_KEXEC_FILE
 static int get_nr_ram_ranges_callback(unsigned long start_pfn,
 				unsigned long nr_pfn, void *arg)
 {
@@ -696,5 +695,4 @@ int crash_load_segments(struct kimage *image)
 
 	return ret;
 }
-
-#endif /* CONFIG_X86_64 */
+#endif /* CONFIG_KEXEC_FILE */

arch/x86/kernel/machine_kexec_64.c

@@ -25,9 +25,11 @@
 #include <asm/debugreg.h>
 #include <asm/kexec-bzimage64.h>
 
+#ifdef CONFIG_KEXEC_FILE
 static struct kexec_file_ops *kexec_file_loaders[] = {
 		&kexec_bzImage64_ops,
 };
+#endif
 
 static void free_transition_pgtable(struct kimage *image)
 {
@@ -178,6 +180,7 @@ static void load_segments(void)
 		);
 }
 
+#ifdef CONFIG_KEXEC_FILE
 /* Update purgatory as needed after various image segments have been prepared */
 static int arch_update_purgatory(struct kimage *image)
 {
@@ -209,6 +212,12 @@ static int arch_update_purgatory(struct kimage *image)
 
 	return ret;
 }
+#else /* !CONFIG_KEXEC_FILE */
+static inline int arch_update_purgatory(struct kimage *image)
+{
+	return 0;
+}
+#endif /* CONFIG_KEXEC_FILE */
 
 int machine_kexec_prepare(struct kimage *image)
 {
@@ -329,6 +338,7 @@ void arch_crash_save_vmcoreinfo(void)
 
 /* arch-dependent functionality related to kexec file-based syscall */
 
+#ifdef CONFIG_KEXEC_FILE
 int arch_kexec_kernel_image_probe(struct kimage *image, void *buf,
 				  unsigned long buf_len)
 {
@@ -522,3 +532,4 @@ overflow:
 	       (int)ELF64_R_TYPE(rel[i].r_info), value);
 	return -ENOEXEC;
 }
+#endif /* CONFIG_KEXEC_FILE */

arch/x86/purgatory/Makefile

@@ -11,6 +11,7 @@ targets += purgatory.ro
 # sure how to relocate those. Like kexec-tools, use custom flags.
 
 KBUILD_CFLAGS := -fno-strict-aliasing -Wall -Wstrict-prototypes -fno-zero-initialized-in-bss -fno-builtin -ffreestanding -c -MD -Os -mcmodel=large
+KBUILD_CFLAGS += -m$(BITS)
 
 $(obj)/purgatory.ro: $(PURGATORY_OBJS) FORCE
 		$(call if_changed,ld)
@@ -24,7 +25,4 @@ $(obj)/kexec-purgatory.c: $(obj)/purgatory.ro FORCE
 	$(call if_changed,bin2c)
 
 
-# No loaders for 32bits yet.
-ifeq ($(CONFIG_X86_64),y)
- obj-$(CONFIG_KEXEC)		+= kexec-purgatory.o
-endif
+obj-$(CONFIG_KEXEC_FILE)	+= kexec-purgatory.o

arch/xtensa/kernel/smp.c

@@ -571,6 +571,7 @@ void flush_icache_range(unsigned long start, unsigned long end)
 	};
 	on_each_cpu(ipi_flush_icache_range, &fd, 1);
 }
+EXPORT_SYMBOL(flush_icache_range);
 
 /* ------------------------------------------------------------------------- */
 

drivers/block/zram/zram_drv.c

@@ -378,7 +378,6 @@ static int zram_decompress_page(struct zram *zram, char *mem, u32 index)
 	/* Should NEVER happen. Return bio error if it does. */
 	if (unlikely(ret)) {
 		pr_err("Decompression failed! err=%d, page=%u\n", ret, index);
-		atomic64_inc(&zram->stats.failed_reads);
 		return ret;
 	}
 
@@ -547,8 +546,6 @@ out:
 		zcomp_strm_release(zram->comp, zstrm);
 	if (is_partial_io(bvec))
 		kfree(uncmem);
-	if (ret)
-		atomic64_inc(&zram->stats.failed_writes);
 	return ret;
 }
 
@@ -566,6 +563,13 @@ static int zram_bvec_rw(struct zram *zram, struct bio_vec *bvec, u32 index,
 		ret = zram_bvec_write(zram, bvec, index, offset);
 	}
 
+	if (unlikely(ret)) {
+		if (rw == READ)
+			atomic64_inc(&zram->stats.failed_reads);
+		else
+			atomic64_inc(&zram->stats.failed_writes);
+	}
+
 	return ret;
 }
 

drivers/block/zram/zram_drv.h

@@ -84,7 +84,7 @@ struct zram_stats {
 	atomic64_t compr_data_size;	/* compressed size of pages stored */
 	atomic64_t num_reads;	/* failed + successful */
 	atomic64_t num_writes;	/* --do-- */
-	atomic64_t failed_reads;	/* should NEVER! happen */
+	atomic64_t failed_reads;	/* can happen when memory is too low */
 	atomic64_t failed_writes;	/* can happen when memory is too low */
 	atomic64_t invalid_io;	/* non-page-aligned I/O requests */
 	atomic64_t notify_free;	/* no. of swap slot free notifications */

drivers/rtc/rtc-s5m.c

@@ -717,12 +717,14 @@ static int s5m_rtc_probe(struct platform_device *pdev)
 	info->device_type = s5m87xx->device_type;
 	info->wtsr_smpl = s5m87xx->wtsr_smpl;
 
-	info->irq = regmap_irq_get_virq(s5m87xx->irq_data, alarm_irq);
-	if (info->irq <= 0) {
-		ret = -EINVAL;
-		dev_err(&pdev->dev, "Failed to get virtual IRQ %d\n",
+	if (s5m87xx->irq_data) {
+		info->irq = regmap_irq_get_virq(s5m87xx->irq_data, alarm_irq);
+		if (info->irq <= 0) {
+			ret = -EINVAL;
+			dev_err(&pdev->dev, "Failed to get virtual IRQ %d\n",
 				alarm_irq);
-		goto err;
+			goto err;
+		}
 	}
 
 	platform_set_drvdata(pdev, info);
@@ -744,6 +746,11 @@ static int s5m_rtc_probe(struct platform_device *pdev)
 		goto err;
 	}
 
+	if (!info->irq) {
+		dev_info(&pdev->dev, "Alarm IRQ not available\n");
+		return 0;
+	}
+
 	ret = devm_request_threaded_irq(&pdev->dev, info->irq, NULL,
 					s5m_rtc_alarm_irq, 0, "rtc-alarm0",
 					info);
@@ -802,7 +809,7 @@ static int s5m_rtc_resume(struct device *dev)
 	struct s5m_rtc_info *info = dev_get_drvdata(dev);
 	int ret = 0;
 
-	if (device_may_wakeup(dev))
+	if (info->irq && device_may_wakeup(dev))
 		ret = disable_irq_wake(info->irq);
 
 	return ret;
@@ -813,7 +820,7 @@ static int s5m_rtc_suspend(struct device *dev)
 	struct s5m_rtc_info *info = dev_get_drvdata(dev);
 	int ret = 0;
 
-	if (device_may_wakeup(dev))
+	if (info->irq && device_may_wakeup(dev))
 		ret = enable_irq_wake(info->irq);
 
 	return ret;

fs/ocfs2/cluster/quorum.c

@@ -160,9 +160,18 @@ static void o2quo_make_decision(struct work_struct *work)
 	}
 
 out:
-	spin_unlock(&qs->qs_lock);
-	if (fence)
+	if (fence) {
+		spin_unlock(&qs->qs_lock);
 		o2quo_fence_self();
+	} else {
+		mlog(ML_NOTICE, "not fencing this node, heartbeating: %d, "
+			"connected: %d, lowest: %d (%sreachable)\n",
+			qs->qs_heartbeating, qs->qs_connected, lowest_hb,
+			lowest_reachable ? "" : "un");
+		spin_unlock(&qs->qs_lock);
+
+	}
+
 }
 
 static void o2quo_set_hold(struct o2quo_state *qs, u8 node)

fs/ocfs2/cluster/tcp.c

@@ -1480,6 +1480,14 @@ static int o2net_set_nodelay(struct socket *sock)
 	return ret;
 }
 
+static int o2net_set_usertimeout(struct socket *sock)
+{
+	int user_timeout = O2NET_TCP_USER_TIMEOUT;
+
+	return kernel_setsockopt(sock, SOL_TCP, TCP_USER_TIMEOUT,
+				(char *)&user_timeout, sizeof(user_timeout));
+}
+
 static void o2net_initialize_handshake(void)
 {
 	o2net_hand->o2hb_heartbeat_timeout_ms = cpu_to_be32(
@@ -1536,16 +1544,20 @@ static void o2net_idle_timer(unsigned long data)
 #endif
 
 	printk(KERN_NOTICE "o2net: Connection to " SC_NODEF_FMT " has been "
-	       "idle for %lu.%lu secs, shutting it down.\n", SC_NODEF_ARGS(sc),
-	       msecs / 1000, msecs % 1000);
+	       "idle for %lu.%lu secs.\n",
+	       SC_NODEF_ARGS(sc), msecs / 1000, msecs % 1000);
 
-	/*
-	 * Initialize the nn_timeout so that the next connection attempt
-	 * will continue in o2net_start_connect.
+	/* idle timerout happen, don't shutdown the connection, but
+	 * make fence decision. Maybe the connection can recover before
+	 * the decision is made.
 	 */
 	atomic_set(&nn->nn_timeout, 1);
+	o2quo_conn_err(o2net_num_from_nn(nn));
+	queue_delayed_work(o2net_wq, &nn->nn_still_up,
+			msecs_to_jiffies(O2NET_QUORUM_DELAY_MS));
+
+	o2net_sc_reset_idle_timer(sc);
 
-	o2net_sc_queue_work(sc, &sc->sc_shutdown_work);
 }
 
 static void o2net_sc_reset_idle_timer(struct o2net_sock_container *sc)
@@ -1560,6 +1572,15 @@ static void o2net_sc_reset_idle_timer(struct o2net_sock_container *sc)
 
 static void o2net_sc_postpone_idle(struct o2net_sock_container *sc)
 {
+	struct o2net_node *nn = o2net_nn_from_num(sc->sc_node->nd_num);
+
+	/* clear fence decision since the connection recover from timeout*/
+	if (atomic_read(&nn->nn_timeout)) {
+		o2quo_conn_up(o2net_num_from_nn(nn));
+		cancel_delayed_work(&nn->nn_still_up);
+		atomic_set(&nn->nn_timeout, 0);
+	}
+
 	/* Only push out an existing timer */
 	if (timer_pending(&sc->sc_idle_timeout))
 		o2net_sc_reset_idle_timer(sc);
@@ -1650,6 +1671,12 @@ static void o2net_start_connect(struct work_struct *work)
 		goto out;
 	}
 
+	ret = o2net_set_usertimeout(sock);
+	if (ret) {
+		mlog(ML_ERROR, "set TCP_USER_TIMEOUT failed with %d\n", ret);
+		goto out;
+	}
+
 	o2net_register_callbacks(sc->sc_sock->sk, sc);
 
 	spin_lock(&nn->nn_lock);
@@ -1831,6 +1858,12 @@ static int o2net_accept_one(struct socket *sock, int *more)
 		goto out;
 	}
 
+	ret = o2net_set_usertimeout(new_sock);
+	if (ret) {
+		mlog(ML_ERROR, "set TCP_USER_TIMEOUT failed with %d\n", ret);
+		goto out;
+	}
+
 	slen = sizeof(sin);
 	ret = new_sock->ops->getname(new_sock, (struct sockaddr *) &sin,
 				       &slen, 1);

fs/ocfs2/cluster/tcp.h

@@ -63,6 +63,7 @@ typedef void (o2net_post_msg_handler_func)(int status, void *data,
 #define O2NET_KEEPALIVE_DELAY_MS_DEFAULT	2000
 #define O2NET_IDLE_TIMEOUT_MS_DEFAULT		30000
 
+#define O2NET_TCP_USER_TIMEOUT			0x7fffffff
 
 /* TODO: figure this out.... */
 static inline int o2net_link_down(int err, struct socket *sock)

fs/ocfs2/ioctl.c

@@ -35,9 +35,8 @@
 		copy_to_user((typeof(a) __user *)b, &(a), sizeof(a))
 
 /*
- * This call is void because we are already reporting an error that may
- * be -EFAULT.  The error will be returned from the ioctl(2) call.  It's
- * just a best-effort to tell userspace that this request caused the error.
+ * This is just a best-effort to tell userspace that this request
+ * caused the error.
  */
 static inline void o2info_set_request_error(struct ocfs2_info_request *kreq,
 					struct ocfs2_info_request __user *req)
@@ -146,136 +145,105 @@ bail:
 static int ocfs2_info_handle_blocksize(struct inode *inode,
 				       struct ocfs2_info_request __user *req)
 {
-	int status = -EFAULT;
 	struct ocfs2_info_blocksize oib;
 
 	if (o2info_from_user(oib, req))
-		goto bail;
+		return -EFAULT;
 
 	oib.ib_blocksize = inode->i_sb->s_blocksize;
 
 	o2info_set_request_filled(&oib.ib_req);
 
 	if (o2info_to_user(oib, req))
-		goto bail;
-
-	status = 0;
-bail:
-	if (status)
-		o2info_set_request_error(&oib.ib_req, req);
+		return -EFAULT;
 
-	return status;
+	return 0;
 }
 
 static int ocfs2_info_handle_clustersize(struct inode *inode,
 					 struct ocfs2_info_request __user *req)
 {
-	int status = -EFAULT;
 	struct ocfs2_info_clustersize oic;
 	struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
 
 	if (o2info_from_user(oic, req))
-		goto bail;
+		return -EFAULT;
 
 	oic.ic_clustersize = osb->s_clustersize;
 
 	o2info_set_request_filled(&oic.ic_req);
 
 	if (o2info_to_user(oic, req))
-		goto bail;
-
-	status = 0;
-bail:
-	if (status)
-		o2info_set_request_error(&oic.ic_req, req);
+		return -EFAULT;
 
-	return status;
+	return 0;
 }
 
 static int ocfs2_info_handle_maxslots(struct inode *inode,
 				      struct ocfs2_info_request __user *req)
 {
-	int status = -EFAULT;
 	struct ocfs2_info_maxslots oim;
 	struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
 
 	if (o2info_from_user(oim, req))
-		goto bail;
+		return -EFAULT;
 
 	oim.im_max_slots = osb->max_slots;
 
 	o2info_set_request_filled(&oim.im_req);
 
 	if (o2info_to_user(oim, req))
-		goto bail;
+		return -EFAULT;
 
-	status = 0;
-bail:
-	if (status)
-		o2info_set_request_error(&oim.im_req, req);
-
-	return status;
+	return 0;
 }
 
 static int ocfs2_info_handle_label(struct inode *inode,
 				   struct ocfs2_info_request __user *req)
 {
-	int status = -EFAULT;
 	struct ocfs2_info_label oil;
 	struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
 
 	if (o2info_from_user(oil, req))
-		goto bail;
+		return -EFAULT;
 
 	memcpy(oil.il_label, osb->vol_label, OCFS2_MAX_VOL_LABEL_LEN);
 
 	o2info_set_request_filled(&oil.il_req);
 
 	if (o2info_to_user(oil, req))
-		goto bail;
+		return -EFAULT;
 
-	status = 0;
-bail:
-	if (status)
-		o2info_set_request_error(&oil.il_req, req);
-
-	return status;
+	return 0;
 }
 
 static int ocfs2_info_handle_uuid(struct inode *inode,
 				  struct ocfs2_info_request __user *req)
 {
-	int status = -EFAULT;
 	struct ocfs2_info_uuid oiu;
 	struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
 
 	if (o2info_from_user(oiu, req))
-		goto bail;
+		return -EFAULT;
 
 	memcpy(oiu.iu_uuid_str, osb->uuid_str, OCFS2_TEXT_UUID_LEN + 1);
 
 	o2info_set_request_filled(&oiu.iu_req);
 
 	if (o2info_to_user(oiu, req))
-		goto bail;
-
-	status = 0;
-bail:
-	if (status)
-		o2info_set_request_error(&oiu.iu_req, req);
+		return -EFAULT;
 
-	return status;
+	return 0;
 }
 
 static int ocfs2_info_handle_fs_features(struct inode *inode,
 					 struct ocfs2_info_request __user *req)
 {
-	int status = -EFAULT;
 	struct ocfs2_info_fs_features oif;
 	struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
 
 	if (o2info_from_user(oif, req))
-		goto bail;
+		return -EFAULT;
 
 	oif.if_compat_features = osb->s_feature_compat;
 	oif.if_incompat_features = osb->s_feature_incompat;
@@ -284,39 +252,28 @@ static int ocfs2_info_handle_fs_features(struct inode *inode,
 	o2info_set_request_filled(&oif.if_req);
 
 	if (o2info_to_user(oif, req))
-		goto bail;
+		return -EFAULT;
 
-	status = 0;
-bail:
-	if (status)
-		o2info_set_request_error(&oif.if_req, req);
-
-	return status;
+	return 0;
 }
 
 static int ocfs2_info_handle_journal_size(struct inode *inode,
 					  struct ocfs2_info_request __user *req)
 {
-	int status = -EFAULT;
 	struct ocfs2_info_journal_size oij;
 	struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
 
 	if (o2info_from_user(oij, req))
-		goto bail;
+		return -EFAULT;
 
 	oij.ij_journal_size = i_size_read(osb->journal->j_inode);
 
 	o2info_set_request_filled(&oij.ij_req);
 
 	if (o2info_to_user(oij, req))
-		goto bail;
+		return -EFAULT;
 
-	status = 0;
-bail:
-	if (status)
-		o2info_set_request_error(&oij.ij_req, req);
-
-	return status;
+	return 0;
 }
 
 static int ocfs2_info_scan_inode_alloc(struct ocfs2_super *osb,
@@ -373,7 +330,7 @@ static int ocfs2_info_handle_freeinode(struct inode *inode,
 	u32 i;
 	u64 blkno = -1;
 	char namebuf[40];
-	int status = -EFAULT, type = INODE_ALLOC_SYSTEM_INODE;
+	int status, type = INODE_ALLOC_SYSTEM_INODE;
 	struct ocfs2_info_freeinode *oifi = NULL;
 	struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
 	struct inode *inode_alloc = NULL;
@@ -385,8 +342,10 @@ static int ocfs2_info_handle_freeinode(struct inode *inode,
 		goto out_err;
 	}
 
-	if (o2info_from_user(*oifi, req))
-		goto bail;
+	if (o2info_from_user(*oifi, req)) {
+		status = -EFAULT;
+		goto out_free;
+	}
 
 	oifi->ifi_slotnum = osb->max_slots;
 
@@ -424,14 +383,16 @@ static int ocfs2_info_handle_freeinode(struct inode *inode,
 
 	o2info_set_request_filled(&oifi->ifi_req);
 
-	if (o2info_to_user(*oifi, req))
-		goto bail;
+	if (o2info_to_user(*oifi, req)) {
+		status = -EFAULT;
+		goto out_free;
+	}
 
 	status = 0;
 bail:
 	if (status)
 		o2info_set_request_error(&oifi->ifi_req, req);
-
+out_free:
 	kfree(oifi);
 out_err:
 	return status;
@@ -658,7 +619,7 @@ static int ocfs2_info_handle_freefrag(struct inode *inode,
 {
 	u64 blkno = -1;
 	char namebuf[40];
-	int status = -EFAULT, type = GLOBAL_BITMAP_SYSTEM_INODE;
+	int status, type = GLOBAL_BITMAP_SYSTEM_INODE;
 
 	struct ocfs2_info_freefrag *oiff;
 	struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
@@ -671,8 +632,10 @@ static int ocfs2_info_handle_freefrag(struct inode *inode,
 		goto out_err;
 	}
 
-	if (o2info_from_user(*oiff, req))
-		goto bail;
+	if (o2info_from_user(*oiff, req)) {
+		status = -EFAULT;
+		goto out_free;
+	}
 	/*
 	 * chunksize from userspace should be power of 2.
 	 */
@@ -711,14 +674,14 @@ static int ocfs2_info_handle_freefrag(struct inode *inode,
 
 	if (o2info_to_user(*oiff, req)) {
 		status = -EFAULT;
-		goto bail;
+		goto out_free;
 	}
 
 	status = 0;
 bail:
 	if (status)
 		o2info_set_request_error(&oiff->iff_req, req);
-
+out_free:
 	kfree(oiff);
 out_err:
 	return status;
@@ -727,23 +690,17 @@ out_err:
 static int ocfs2_info_handle_unknown(struct inode *inode,
 				     struct ocfs2_info_request __user *req)
 {
-	int status = -EFAULT;
 	struct ocfs2_info_request oir;
 
 	if (o2info_from_user(oir, req))
-		goto bail;
+		return -EFAULT;
 
 	o2info_clear_request_filled(&oir);
 
 	if (o2info_to_user(oir, req))
-		goto bail;
+		return -EFAULT;
 
-	status = 0;
-bail:
-	if (status)
-		o2info_set_request_error(&oir, req);
-
-	return status;
+	return 0;
 }
 
 /*

include/uapi/linux/xattr.h

@@ -13,7 +13,7 @@
 #ifndef _UAPI_LINUX_XATTR_H
 #define _UAPI_LINUX_XATTR_H
 
-#ifdef __UAPI_DEF_XATTR
+#if __UAPI_DEF_XATTR
 #define __USE_KERNEL_XATTR_DEFS
 
 #define XATTR_CREATE	0x1	/* set value, fail if attr already exists */

kernel/kexec.c

@@ -64,7 +64,9 @@ bool kexec_in_progress = false;
 char __weak kexec_purgatory[0];
 size_t __weak kexec_purgatory_size = 0;
 
+#ifdef CONFIG_KEXEC_FILE
 static int kexec_calculate_store_digests(struct kimage *image);
+#endif
 
 /* Location of the reserved area for the crash kernel */
 struct resource crashk_res = {
@@ -341,6 +343,7 @@ out_free_image:
 	return ret;
 }
 
+#ifdef CONFIG_KEXEC_FILE
 static int copy_file_from_fd(int fd, void **buf, unsigned long *buf_len)
 {
 	struct fd f = fdget(fd);
@@ -612,6 +615,9 @@ out_free_image:
 	kfree(image);
 	return ret;
 }
+#else /* CONFIG_KEXEC_FILE */
+static inline void kimage_file_post_load_cleanup(struct kimage *image) { }
+#endif /* CONFIG_KEXEC_FILE */
 
 static int kimage_is_destination_range(struct kimage *image,
 					unsigned long start,
@@ -1375,6 +1381,7 @@ COMPAT_SYSCALL_DEFINE4(kexec_load, compat_ulong_t, entry,
 }
 #endif
 
+#ifdef CONFIG_KEXEC_FILE
 SYSCALL_DEFINE5(kexec_file_load, int, kernel_fd, int, initrd_fd,
 		unsigned long, cmdline_len, const char __user *, cmdline_ptr,
 		unsigned long, flags)
@@ -1451,6 +1458,8 @@ out:
 	return ret;
 }
 
+#endif /* CONFIG_KEXEC_FILE */
+
 void crash_kexec(struct pt_regs *regs)
 {
 	/* Take the kexec_mutex here to prevent sys_kexec_load
@@ -2006,6 +2015,7 @@ static int __init crash_save_vmcoreinfo_init(void)
 
 subsys_initcall(crash_save_vmcoreinfo_init);
 
+#ifdef CONFIG_KEXEC_FILE
 static int __kexec_add_segment(struct kimage *image, char *buf,
 			       unsigned long bufsz, unsigned long mem,
 			       unsigned long memsz)
@@ -2682,6 +2692,7 @@ int kexec_purgatory_get_set_symbol(struct kimage *image, const char *name,
 
 	return 0;
 }
+#endif /* CONFIG_KEXEC_FILE */
 
 /*
  * Move into place and start executing a preloaded standalone

kernel/resource.c

@@ -351,15 +351,12 @@ static int find_next_iomem_res(struct resource *res, char *name,
 	end = res->end;
 	BUG_ON(start >= end);
 
-	read_lock(&resource_lock);
-
-	if (first_level_children_only) {
-		p = iomem_resource.child;
+	if (first_level_children_only)
 		sibling_only = true;
-	} else
-		p = &iomem_resource;
 
-	while ((p = next_resource(p, sibling_only))) {
+	read_lock(&resource_lock);
+
+	for (p = iomem_resource.child; p; p = next_resource(p, sibling_only)) {
 		if (p->flags != res->flags)
 			continue;
 		if (name && strcmp(p->name, name))

lib/Kconfig.debug

@@ -1036,8 +1036,13 @@ config TRACE_IRQFLAGS
 	  either tracing or lock debugging.
 
 config STACKTRACE
-	bool
+	bool "Stack backtrace support"
 	depends on STACKTRACE_SUPPORT
+	help
+	  This option causes the kernel to create a /proc/pid/stack for
+	  every process, showing its current stack trace.
+	  It is also used by various kernel debugging features that require
+	  stack trace generation.
 
 config DEBUG_KOBJECT
 	bool "kobject debugging"

mm/hugetlb_cgroup.c

@@ -217,7 +217,7 @@ void hugetlb_cgroup_uncharge_page(int idx, unsigned long nr_pages,
 
 	if (hugetlb_cgroup_disabled())
 		return;
-	VM_BUG_ON(!spin_is_locked(&hugetlb_lock));
+	lockdep_assert_held(&hugetlb_lock);
 	h_cg = hugetlb_cgroup_from_page(page);
 	if (unlikely(!h_cg))
 		return;

mm/memblock.c

@@ -192,8 +192,7 @@ phys_addr_t __init_memblock memblock_find_in_range_node(phys_addr_t size,
 					phys_addr_t align, phys_addr_t start,
 					phys_addr_t end, int nid)
 {
-	int ret;
-	phys_addr_t kernel_end;
+	phys_addr_t kernel_end, ret;
 
 	/* pump up @end */
 	if (end == MEMBLOCK_ALLOC_ACCESSIBLE)

mm/memory.c

@@ -751,7 +751,7 @@ struct page *vm_normal_page(struct vm_area_struct *vma, unsigned long addr,
 	unsigned long pfn = pte_pfn(pte);
 
 	if (HAVE_PTE_SPECIAL) {
-		if (likely(!pte_special(pte) || pte_numa(pte)))
+		if (likely(!pte_special(pte)))
 			goto check_pfn;
 		if (vma->vm_flags & (VM_PFNMAP | VM_MIXEDMAP))
 			return NULL;
@@ -777,15 +777,14 @@ struct page *vm_normal_page(struct vm_area_struct *vma, unsigned long addr,
 		}
 	}
 
+	if (is_zero_pfn(pfn))
+		return NULL;
 check_pfn:
 	if (unlikely(pfn > highest_memmap_pfn)) {
 		print_bad_pte(vma, addr, pte, NULL);
 		return NULL;
 	}
 
-	if (is_zero_pfn(pfn))
-		return NULL;
-
 	/*
 	 * NOTE! We still have PageReserved() pages in the page tables.
 	 * eg. VDSO mappings can cause them to exist.

mm/pgtable-generic.c

@@ -195,7 +195,7 @@ void pmdp_invalidate(struct vm_area_struct *vma, unsigned long address,
 	pmd_t entry = *pmdp;
 	if (pmd_numa(entry))
 		entry = pmd_mknonnuma(entry);
-	set_pmd_at(vma->vm_mm, address, pmdp, pmd_mknotpresent(*pmdp));
+	set_pmd_at(vma->vm_mm, address, pmdp, pmd_mknotpresent(entry));
 	flush_tlb_range(vma, address, address + HPAGE_PMD_SIZE);
 }
 #endif /* CONFIG_TRANSPARENT_HUGEPAGE */

mm/zbud.c

@@ -195,6 +195,7 @@ static struct zpool_driver zbud_zpool_driver = {
 	.total_size =	zbud_zpool_total_size,
 };
 
+MODULE_ALIAS("zpool-zbud");
 #endif /* CONFIG_ZPOOL */
 
 /*****************

mm/zpool.c

@@ -150,7 +150,7 @@ struct zpool *zpool_create_pool(char *type, gfp_t gfp, struct zpool_ops *ops)
 	driver = zpool_get_driver(type);
 
 	if (!driver) {
-		request_module(type);
+		request_module("zpool-%s", type);
 		driver = zpool_get_driver(type);
 	}
 

mm/zsmalloc.c

@@ -315,6 +315,7 @@ static struct zpool_driver zs_zpool_driver = {
 	.total_size =	zs_zpool_total_size,
 };
 
+MODULE_ALIAS("zpool-zsmalloc");
 #endif /* CONFIG_ZPOOL */
 
 /* per-cpu VM mapping areas for zspage accesses that cross page boundaries */

scripts/checkpatch.pl

@@ -2133,7 +2133,7 @@ sub process {
 # Check for improperly formed commit descriptions
 		if ($in_commit_log &&
 		    $line =~ /\bcommit\s+[0-9a-f]{5,}/i &&
-		    $line !~ /\b[Cc]ommit [0-9a-f]{12,16} \("/) {
+		    $line !~ /\b[Cc]ommit [0-9a-f]{12,40} \("/) {
 			$line =~ /\b(c)ommit\s+([0-9a-f]{5,})/i;
 			my $init_char = $1;
 			my $orig_commit = lc($2);
@@ -2141,7 +2141,7 @@ sub process {
 			my $desc = 'commit description';
 		        ($id, $desc) = git_commit_info($orig_commit, $id, $desc);
 			ERROR("GIT_COMMIT_ID",
-			      "Please use 12 to 16 chars for the git commit ID like: '${init_char}ommit $id (\"$desc\")'\n" . $herecurr);
+			      "Please use 12 or more chars for the git commit ID like: '${init_char}ommit $id (\"$desc\")'\n" . $herecurr);
 		}
 
 # Check for added, moved or deleted files

tools/testing/selftests/ipc/Makefile

@@ -1,18 +1,18 @@
 uname_M := $(shell uname -m 2>/dev/null || echo not)
 ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/i386/)
 ifeq ($(ARCH),i386)
-        ARCH := X86
+        ARCH := x86
 	CFLAGS := -DCONFIG_X86_32 -D__i386__
 endif
 ifeq ($(ARCH),x86_64)
-	ARCH := X86
+	ARCH := x86
 	CFLAGS := -DCONFIG_X86_64 -D__x86_64__
 endif
 
 CFLAGS += -I../../../../usr/include/
 
 all:
-ifeq ($(ARCH),X86)
+ifeq ($(ARCH),x86)
 	gcc $(CFLAGS) msgque.c -o msgque_test
 else
 	echo "Not an x86 target, can't build msgque selftest"

tools/testing/selftests/kcmp/Makefile

@@ -1,11 +1,11 @@
 uname_M := $(shell uname -m 2>/dev/null || echo not)
 ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/i386/)
 ifeq ($(ARCH),i386)
-        ARCH := X86
+        ARCH := x86
 	CFLAGS := -DCONFIG_X86_32 -D__i386__
 endif
 ifeq ($(ARCH),x86_64)
-	ARCH := X86
+	ARCH := x86
 	CFLAGS := -DCONFIG_X86_64 -D__x86_64__
 endif
 
@@ -15,7 +15,7 @@ CFLAGS += -I../../../../usr/include/
 CFLAGS += -I../../../../arch/x86/include/
 
 all:
-ifeq ($(ARCH),X86)
+ifeq ($(ARCH),x86)
 	gcc $(CFLAGS) kcmp_test.c -o kcmp_test
 else
 	echo "Not an x86 target, can't build kcmp selftest"

tools/testing/selftests/memfd/Makefile

@@ -1,10 +1,10 @@
 uname_M := $(shell uname -m 2>/dev/null || echo not)
 ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/i386/)
 ifeq ($(ARCH),i386)
-	ARCH := X86
+	ARCH := x86
 endif
 ifeq ($(ARCH),x86_64)
-	ARCH := X86
+	ARCH := x86
 endif
 
 CFLAGS += -D_FILE_OFFSET_BITS=64
@@ -14,20 +14,20 @@ CFLAGS += -I../../../../include/uapi/
 CFLAGS += -I../../../../include/
 
 all:
-ifeq ($(ARCH),X86)
+ifeq ($(ARCH),x86)
 	gcc $(CFLAGS) memfd_test.c -o memfd_test
 else
 	echo "Not an x86 target, can't build memfd selftest"
 endif
 
 run_tests: all
-ifeq ($(ARCH),X86)
+ifeq ($(ARCH),x86)
 	gcc $(CFLAGS) memfd_test.c -o memfd_test
 endif
 	@./memfd_test || echo "memfd_test: [FAIL]"
 
 build_fuse:
-ifeq ($(ARCH),X86)
+ifeq ($(ARCH),x86)
 	gcc $(CFLAGS) fuse_mnt.c `pkg-config fuse --cflags --libs` -o fuse_mnt
 	gcc $(CFLAGS) fuse_test.c -o fuse_test
 else