rtlwifi: rtl8192c-common: Remove all instances of DBG_EMERG

This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/realtek/rtlwifi/rtl8192c/fw_common.c

@@ -145,10 +145,8 @@ static void _rtl92c_write_fw(struct ieee80211_hw *hw,
 		pageNums = size / FW_8192C_PAGE_SIZE;
 		remainsize = size % FW_8192C_PAGE_SIZE;
 
-		if (pageNums > 4) {
-			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-				 "Page numbers should not greater then 4\n");
-		}
+		if (pageNums > 4)
+			pr_err("Page numbers should not greater then 4\n");
 
 		for (page = 0; page < pageNums; page++) {
 			offset = page * FW_8192C_PAGE_SIZE;
@@ -180,15 +178,10 @@ static int _rtl92c_fw_free_to_go(struct ieee80211_hw *hw)
 		 (!(value32 & FWDL_ChkSum_rpt)));
 
 	if (counter >= FW_8192C_POLLING_TIMEOUT_COUNT) {
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 "chksum report faill ! REG_MCUFWDL:0x%08x .\n",
-			  value32);
+		pr_err("chksum report fail! REG_MCUFWDL:0x%08x .\n",
+		       value32);
 		goto exit;
 	}
-
-	RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE,
-		 "Checksum report OK ! REG_MCUFWDL:0x%08x .\n", value32);
-
 	value32 = rtl_read_dword(rtlpriv, REG_MCUFWDL);
 	value32 |= MCUFWDL_RDY;
 	value32 &= ~WINTINI_RDY;
@@ -198,20 +191,15 @@ static int _rtl92c_fw_free_to_go(struct ieee80211_hw *hw)
 
 	do {
 		value32 = rtl_read_dword(rtlpriv, REG_MCUFWDL);
-		if (value32 & WINTINI_RDY) {
-			RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE,
-				 "Polling FW ready success!! REG_MCUFWDL:0x%08x .\n",
-					value32);
-			err = 0;
-			goto exit;
-		}
+		if (value32 & WINTINI_RDY)
+			return 0;
 
 		mdelay(FW_8192C_POLLING_DELAY);
 
 	} while (counter++ < FW_8192C_POLLING_TIMEOUT_COUNT);
 
-	RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-		 "Polling FW ready fail!! REG_MCUFWDL:0x%08x .\n", value32);
+	pr_err("Polling FW ready fail! REG_MCUFWDL:0x%08x.\n",
+	       value32);
 
 exit:
 	return err;
@@ -251,8 +239,7 @@ int rtl92c_download_fw(struct ieee80211_hw *hw)
 
 	err = _rtl92c_fw_free_to_go(hw);
 	if (err) {
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 "Firmware is not ready to run!\n");
+		pr_err("Firmware is not ready to run!\n");
 	} else {
 		RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE,
 			 "Firmware is ready to run!\n");
@@ -327,8 +314,7 @@ static void _rtl92c_fill_h2c_command(struct ieee80211_hw *hw,
 	while (!bwrite_sucess) {
 		wait_writeh2c_limmit--;
 		if (wait_writeh2c_limmit == 0) {
-			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-				 "Write H2C fail because no trigger for FW INT!\n");
+			pr_err("Write H2C fail because no trigger for FW INT!\n");
 			break;
 		}
 

drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c

@@ -104,7 +104,7 @@ u32 _rtl92c_phy_rf_serial_read(struct ieee80211_hw *hw,
 	offset &= 0x3f;
 	newoffset = offset;
 	if (RT_CANNOT_IO(hw)) {
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "return all one\n");
+		pr_err("return all one\n");
 		return 0xFFFFFFFF;
 	}
 	tmplong = rtl_get_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, MASKDWORD);
@@ -152,7 +152,7 @@ void _rtl92c_phy_rf_serial_write(struct ieee80211_hw *hw,
 	struct bb_reg_def *pphyreg = &rtlphy->phyreg_def[rfpath];
 
 	if (RT_CANNOT_IO(hw)) {
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "stop\n");
+		pr_err("stop\n");
 		return;
 	}
 	offset &= 0x3f;
@@ -209,7 +209,7 @@ bool _rtl92c_phy_bb8192c_config_parafile(struct ieee80211_hw *hw)
 	rtstatus = rtlpriv->cfg->ops->config_bb_with_headerfile(hw,
 						 BASEBAND_CONFIG_PHY_REG);
 	if (!rtstatus) {
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Write BB Reg Fail!!\n");
+		pr_err("Write BB Reg Fail!!\n");
 		return false;
 	}
 	if (rtlphy->rf_type == RF_1T2R) {
@@ -222,13 +222,13 @@ bool _rtl92c_phy_bb8192c_config_parafile(struct ieee80211_hw *hw)
 						   BASEBAND_CONFIG_PHY_REG);
 	}
 	if (!rtstatus) {
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "BB_PG Reg Fail!!\n");
+		pr_err("BB_PG Reg Fail!!\n");
 		return false;
 	}
 	rtstatus = rtlpriv->cfg->ops->config_bb_with_headerfile(hw,
 						 BASEBAND_CONFIG_AGC_TAB);
 	if (!rtstatus) {
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "AGC Table Fail\n");
+		pr_err("AGC Table Fail\n");
 		return false;
 	}
 	rtlphy->cck_high_power =
@@ -860,8 +860,8 @@ bool _rtl92c_phy_sw_chnl_step_by_step(struct ieee80211_hw *hw,
 			currentcmd = &postcommoncmd[*step];
 			break;
 		default:
-			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-				 "Invalid 'stage' = %d, Check it!\n", *stage);
+			pr_err("Invalid 'stage' = %d, Check it!\n",
+			       *stage);
 			return true;
 		}