Merge 4.9-rc7 into usb-next

We want the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation/devicetree/bindings/ipmi/aspeed,ast2400-bt-bmc.txt → Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt

@@ -6,7 +6,7 @@ perform in-band IPMI communication with their host.
 
 Required properties:
 
-- compatible : should be "aspeed,ast2400-bt-bmc"
+- compatible : should be "aspeed,ast2400-ibt-bmc"
 - reg: physical address and size of the registers
 
 Optional properties:
@@ -17,7 +17,7 @@ Optional properties:
 Example:
 
 	ibt@1e789140 {
-		compatible = "aspeed,ast2400-bt-bmc";
+		compatible = "aspeed,ast2400-ibt-bmc";
 		reg = <0x1e789140 0x18>;
 		interrupts = <8>;
 	};

Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt

@@ -12,7 +12,7 @@ Required properties:
 
 Optional properties:
 - ti,dmic: phandle for the OMAP dmic node if the machine have it connected
-- ti,jack_detection: Need to be present if the board capable to detect jack
+- ti,jack-detection: Need to be present if the board capable to detect jack
   insertion, removal.
 
 Available audio endpoints for the audio-routing table:

Documentation/i2c/i2c-topology

@@ -326,7 +326,7 @@ Two parent-locked sibling muxes
 
 This is a good topology.
 
-                                   .--------.
+                                    .--------.
                    .----------.  .--| dev D1 |
                    |  parent- |--'  '--------'
                 .--|  locked  |     .--------.
@@ -350,7 +350,7 @@ Mux-locked and parent-locked sibling muxes
 
 This is a good topology.
 
-                                   .--------.
+                                    .--------.
                    .----------.  .--| dev D1 |
                    |   mux-   |--'  '--------'
                 .--|  locked  |     .--------.

Documentation/networking/dsa/dsa.txt

@@ -67,13 +67,14 @@ Note that DSA does not currently create network interfaces for the "cpu" and
 Switch tagging protocols
 ------------------------
 
-DSA currently supports 4 different tagging protocols, and a tag-less mode as
+DSA currently supports 5 different tagging protocols, and a tag-less mode as
 well. The different protocols are implemented in:
 
 net/dsa/tag_trailer.c: Marvell's 4 trailer tag mode (legacy)
 net/dsa/tag_dsa.c: Marvell's original DSA tag
 net/dsa/tag_edsa.c: Marvell's enhanced DSA tag
 net/dsa/tag_brcm.c: Broadcom's 4 bytes tag
+net/dsa/tag_qca.c: Qualcomm's 2 bytes tag
 
 The exact format of the tag protocol is vendor specific, but in general, they
 all contain something which:

Documentation/virtual/kvm/api.txt

@@ -777,6 +777,17 @@ Gets the current timestamp of kvmclock as seen by the current guest. In
 conjunction with KVM_SET_CLOCK, it is used to ensure monotonicity on scenarios
 such as migration.
 
+When KVM_CAP_ADJUST_CLOCK is passed to KVM_CHECK_EXTENSION, it returns the
+set of bits that KVM can return in struct kvm_clock_data's flag member.
+
+The only flag defined now is KVM_CLOCK_TSC_STABLE.  If set, the returned
+value is the exact kvmclock value seen by all VCPUs at the instant
+when KVM_GET_CLOCK was called.  If clear, the returned value is simply
+CLOCK_MONOTONIC plus a constant offset; the offset can be modified
+with KVM_SET_CLOCK.  KVM will try to make all VCPUs follow this clock,
+but the exact value read by each VCPU could differ, because the host
+TSC is not stable.
+
 struct kvm_clock_data {
 	__u64 clock;  /* kvmclock current value */
 	__u32 flags;

MAINTAINERS

@@ -77,6 +77,7 @@ Descriptions of section entries:
 	Q: Patchwork web based patch tracking system site
 	T: SCM tree type and location.
 	   Type is one of: git, hg, quilt, stgit, topgit
+	B: Bug tracking system location.
 	S: Status, one of the following:
 	   Supported:	Someone is actually paid to look after this.
 	   Maintained:	Someone actually looks after it.
@@ -281,6 +282,7 @@ L:	linux-acpi@vger.kernel.org
 W:	https://01.org/linux-acpi
 Q:	https://patchwork.kernel.org/project/linux-acpi/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
+B:	https://bugzilla.kernel.org
 S:	Supported
 F:	drivers/acpi/
 F:	drivers/pnp/pnpacpi/
@@ -304,6 +306,8 @@ W:	https://acpica.org/
 W:	https://github.com/acpica/acpica/
 Q:	https://patchwork.kernel.org/project/linux-acpi/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
+B:	https://bugzilla.kernel.org
+B:	https://bugs.acpica.org
 S:	Supported
 F:	drivers/acpi/acpica/
 F:	include/acpi/
@@ -313,6 +317,7 @@ ACPI FAN DRIVER
 M:	Zhang Rui <rui.zhang@intel.com>
 L:	linux-acpi@vger.kernel.org
 W:	https://01.org/linux-acpi
+B:	https://bugzilla.kernel.org
 S:	Supported
 F:	drivers/acpi/fan.c
 
@@ -328,6 +333,7 @@ ACPI THERMAL DRIVER
 M:	Zhang Rui <rui.zhang@intel.com>
 L:	linux-acpi@vger.kernel.org
 W:	https://01.org/linux-acpi
+B:	https://bugzilla.kernel.org
 S:	Supported
 F:	drivers/acpi/*thermal*
 
@@ -335,6 +341,7 @@ ACPI VIDEO DRIVER
 M:	Zhang Rui <rui.zhang@intel.com>
 L:	linux-acpi@vger.kernel.org
 W:	https://01.org/linux-acpi
+B:	https://bugzilla.kernel.org
 S:	Supported
 F:	drivers/acpi/acpi_video.c
 
@@ -5663,6 +5670,7 @@ HIBERNATION (aka Software Suspend, aka swsusp)
 M:	"Rafael J. Wysocki" <rjw@rjwysocki.net>
 M:	Pavel Machek <pavel@ucw.cz>
 L:	linux-pm@vger.kernel.org
+B:	https://bugzilla.kernel.org
 S:	Supported
 F:	arch/x86/power/
 F:	drivers/base/power/
@@ -7084,6 +7092,7 @@ F:	drivers/scsi/53c700*
 LED SUBSYSTEM
 M:	Richard Purdie <rpurdie@rpsys.net>
 M:	Jacek Anaszewski <j.anaszewski@samsung.com>
+M:	Pavel Machek <pavel@ucw.cz>
 L:	linux-leds@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds.git
 S:	Maintained
@@ -8057,6 +8066,7 @@ F:	drivers/infiniband/hw/mlx4/
 F:	include/linux/mlx4/
 
 MELLANOX MLX5 core VPI driver
+M:	Saeed Mahameed <saeedm@mellanox.com>
 M:	Matan Barak <matanb@mellanox.com>
 M:	Leon Romanovsky <leonro@mellanox.com>
 L:	netdev@vger.kernel.org
@@ -9622,6 +9632,7 @@ POWER MANAGEMENT CORE
 M:	"Rafael J. Wysocki" <rjw@rjwysocki.net>
 L:	linux-pm@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
+B:	https://bugzilla.kernel.org
 S:	Supported
 F:	drivers/base/power/
 F:	include/linux/pm.h
@@ -11611,6 +11622,7 @@ M:	"Rafael J. Wysocki" <rjw@rjwysocki.net>
 M:	Len Brown <len.brown@intel.com>
 M:	Pavel Machek <pavel@ucw.cz>
 L:	linux-pm@vger.kernel.org
+B:	https://bugzilla.kernel.org
 S:	Supported
 F:	Documentation/power/
 F:	arch/x86/kernel/acpi/

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 9
 SUBLEVEL = 0
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc7
 NAME = Psychotic Stoned Sheep
 
 # *DOCUMENTATION*
@@ -399,11 +399,12 @@ KBUILD_CFLAGS   := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
 		   -fno-strict-aliasing -fno-common \
 		   -Werror-implicit-function-declaration \
 		   -Wno-format-security \
-		   -std=gnu89
+		   -std=gnu89 $(call cc-option,-fno-PIE)
+
 
 KBUILD_AFLAGS_KERNEL :=
 KBUILD_CFLAGS_KERNEL :=
-KBUILD_AFLAGS   := -D__ASSEMBLY__
+KBUILD_AFLAGS   := -D__ASSEMBLY__ $(call cc-option,-fno-PIE)
 KBUILD_AFLAGS_MODULE  := -DMODULE
 KBUILD_CFLAGS_MODULE  := -DMODULE
 KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds

arch/arm/boot/dts/imx53-qsb.dts

@@ -64,8 +64,8 @@
 			};
 
 			ldo3_reg: ldo3 {
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1725000>;
+				regulator-max-microvolt = <3300000>;
 				regulator-always-on;
 			};
 
@@ -76,8 +76,8 @@
 			};
 
 			ldo5_reg: ldo5 {
-				regulator-min-microvolt = <1725000>;
-				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
 				regulator-always-on;
 			};
 
@@ -100,14 +100,14 @@
 			};
 
 			ldo9_reg: ldo9 {
-				regulator-min-microvolt = <1200000>;
+				regulator-min-microvolt = <1250000>;
 				regulator-max-microvolt = <3600000>;
 				regulator-always-on;
 			};
 
 			ldo10_reg: ldo10 {
-				regulator-min-microvolt = <1250000>;
-				regulator-max-microvolt = <3650000>;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
 				regulator-always-on;
 			};
 		};

arch/arm/boot/dts/logicpd-som-lv.dtsi

@@ -13,6 +13,11 @@
 		};
 	};
 
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0>;
+	};
+
 	wl12xx_vmmc: wl12xx_vmmc {
 		compatible = "regulator-fixed";
 		regulator-name = "vwl1271";

arch/arm/boot/dts/logicpd-torpedo-som.dtsi

@@ -13,9 +13,9 @@
 		};
 	};
 
-	memory@0 {
+	memory@80000000 {
 		device_type = "memory";
-		reg = <0 0>;
+		reg = <0x80000000 0>;
 	};
 
 	leds {

arch/arm/boot/dts/omap5-board-common.dtsi

@@ -124,6 +124,7 @@
 		compatible = "ti,abe-twl6040";
 		ti,model = "omap5-uevm";
 
+		ti,jack-detection;
 		ti,mclk-freq = <19200000>;
 
 		ti,mcpdm = <&mcpdm>;
@@ -415,7 +416,7 @@
 			ti,backup-battery-charge-high-current;
 		};
 
-		gpadc {
+		gpadc: gpadc {
 			compatible = "ti,palmas-gpadc";
 			interrupts = <18 0
 				      16 0
@@ -475,8 +476,8 @@
 				smps6_reg: smps6 {
 					/* VDD_DDR3 - over VDD_SMPS6 */
 					regulator-name = "smps6";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
 					regulator-always-on;
 					regulator-boot-on;
 				};

arch/arm/boot/dts/stih410-b2260.dts

@@ -74,7 +74,7 @@
 		/* Low speed expansion connector */
 		spi0: spi@9844000 {
 			label = "LS-SPI0";
-			cs-gpio = <&pio30 3 0>;
+			cs-gpios = <&pio30 3 0>;
 			status = "okay";
 		};
 

arch/arm/boot/dts/sun8i-a23-a33.dtsi

@@ -282,11 +282,15 @@
 			uart1_pins_a: uart1@0 {
 				allwinner,pins = "PG6", "PG7";
 				allwinner,function = "uart1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			uart1_pins_cts_rts_a: uart1-cts-rts@0 {
 				allwinner,pins = "PG8", "PG9";
 				allwinner,function = "uart1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			mmc0_pins_a: mmc0@0 {

arch/arm/include/asm/Kbuild

@@ -8,7 +8,6 @@ generic-y += early_ioremap.h
 generic-y += emergency-restart.h
 generic-y += errno.h
 generic-y += exec.h
-generic-y += export.h
 generic-y += ioctl.h
 generic-y += ipcbuf.h
 generic-y += irq_regs.h

arch/arm/kernel/Makefile

@@ -33,7 +33,7 @@ endif
 obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
 obj-$(CONFIG_ISA_DMA_API)	+= dma.o
 obj-$(CONFIG_FIQ)		+= fiq.o fiqasm.o
-obj-$(CONFIG_MODULES)		+= module.o
+obj-$(CONFIG_MODULES)		+= armksyms.o module.o
 obj-$(CONFIG_ARM_MODULE_PLTS)	+= module-plts.o
 obj-$(CONFIG_ISA_DMA)		+= dma-isa.o
 obj-$(CONFIG_PCI)		+= bios32.o isa.o

arch/arm/kernel/armksyms.c

@@ -0,0 +1,183 @@
+/*
+ *  linux/arch/arm/kernel/armksyms.c
+ *
+ *  Copyright (C) 2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/export.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/cryptohash.h>
+#include <linux/delay.h>
+#include <linux/in6.h>
+#include <linux/syscalls.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+#include <linux/arm-smccc.h>
+
+#include <asm/checksum.h>
+#include <asm/ftrace.h>
+
+/*
+ * libgcc functions - functions that are used internally by the
+ * compiler...  (prototypes are not correct though, but that
+ * doesn't really matter since they're not versioned).
+ */
+extern void __ashldi3(void);
+extern void __ashrdi3(void);
+extern void __divsi3(void);
+extern void __lshrdi3(void);
+extern void __modsi3(void);
+extern void __muldi3(void);
+extern void __ucmpdi2(void);
+extern void __udivsi3(void);
+extern void __umodsi3(void);
+extern void __do_div64(void);
+extern void __bswapsi2(void);
+extern void __bswapdi2(void);
+
+extern void __aeabi_idiv(void);
+extern void __aeabi_idivmod(void);
+extern void __aeabi_lasr(void);
+extern void __aeabi_llsl(void);
+extern void __aeabi_llsr(void);
+extern void __aeabi_lmul(void);
+extern void __aeabi_uidiv(void);
+extern void __aeabi_uidivmod(void);
+extern void __aeabi_ulcmp(void);
+
+extern void fpundefinstr(void);
+
+void mmioset(void *, unsigned int, size_t);
+void mmiocpy(void *, const void *, size_t);
+
+	/* platform dependent support */
+EXPORT_SYMBOL(arm_delay_ops);
+
+	/* networking */
+EXPORT_SYMBOL(csum_partial);
+EXPORT_SYMBOL(csum_partial_copy_from_user);
+EXPORT_SYMBOL(csum_partial_copy_nocheck);
+EXPORT_SYMBOL(__csum_ipv6_magic);
+
+	/* io */
+#ifndef __raw_readsb
+EXPORT_SYMBOL(__raw_readsb);
+#endif
+#ifndef __raw_readsw
+EXPORT_SYMBOL(__raw_readsw);
+#endif
+#ifndef __raw_readsl
+EXPORT_SYMBOL(__raw_readsl);
+#endif
+#ifndef __raw_writesb
+EXPORT_SYMBOL(__raw_writesb);
+#endif
+#ifndef __raw_writesw
+EXPORT_SYMBOL(__raw_writesw);
+#endif
+#ifndef __raw_writesl
+EXPORT_SYMBOL(__raw_writesl);
+#endif
+
+	/* string / mem functions */
+EXPORT_SYMBOL(strchr);
+EXPORT_SYMBOL(strrchr);
+EXPORT_SYMBOL(memset);
+EXPORT_SYMBOL(memcpy);
+EXPORT_SYMBOL(memmove);
+EXPORT_SYMBOL(memchr);
+EXPORT_SYMBOL(__memzero);
+
+EXPORT_SYMBOL(mmioset);
+EXPORT_SYMBOL(mmiocpy);
+
+#ifdef CONFIG_MMU
+EXPORT_SYMBOL(copy_page);
+
+EXPORT_SYMBOL(arm_copy_from_user);
+EXPORT_SYMBOL(arm_copy_to_user);
+EXPORT_SYMBOL(arm_clear_user);
+
+EXPORT_SYMBOL(__get_user_1);
+EXPORT_SYMBOL(__get_user_2);
+EXPORT_SYMBOL(__get_user_4);
+EXPORT_SYMBOL(__get_user_8);
+
+#ifdef __ARMEB__
+EXPORT_SYMBOL(__get_user_64t_1);
+EXPORT_SYMBOL(__get_user_64t_2);
+EXPORT_SYMBOL(__get_user_64t_4);
+EXPORT_SYMBOL(__get_user_32t_8);
+#endif
+
+EXPORT_SYMBOL(__put_user_1);
+EXPORT_SYMBOL(__put_user_2);
+EXPORT_SYMBOL(__put_user_4);
+EXPORT_SYMBOL(__put_user_8);
+#endif
+
+	/* gcc lib functions */
+EXPORT_SYMBOL(__ashldi3);
+EXPORT_SYMBOL(__ashrdi3);
+EXPORT_SYMBOL(__divsi3);
+EXPORT_SYMBOL(__lshrdi3);
+EXPORT_SYMBOL(__modsi3);
+EXPORT_SYMBOL(__muldi3);
+EXPORT_SYMBOL(__ucmpdi2);
+EXPORT_SYMBOL(__udivsi3);
+EXPORT_SYMBOL(__umodsi3);
+EXPORT_SYMBOL(__do_div64);
+EXPORT_SYMBOL(__bswapsi2);
+EXPORT_SYMBOL(__bswapdi2);
+
+#ifdef CONFIG_AEABI
+EXPORT_SYMBOL(__aeabi_idiv);
+EXPORT_SYMBOL(__aeabi_idivmod);
+EXPORT_SYMBOL(__aeabi_lasr);
+EXPORT_SYMBOL(__aeabi_llsl);
+EXPORT_SYMBOL(__aeabi_llsr);
+EXPORT_SYMBOL(__aeabi_lmul);
+EXPORT_SYMBOL(__aeabi_uidiv);
+EXPORT_SYMBOL(__aeabi_uidivmod);
+EXPORT_SYMBOL(__aeabi_ulcmp);
+#endif
+
+	/* bitops */
+EXPORT_SYMBOL(_set_bit);
+EXPORT_SYMBOL(_test_and_set_bit);
+EXPORT_SYMBOL(_clear_bit);
+EXPORT_SYMBOL(_test_and_clear_bit);
+EXPORT_SYMBOL(_change_bit);
+EXPORT_SYMBOL(_test_and_change_bit);
+EXPORT_SYMBOL(_find_first_zero_bit_le);
+EXPORT_SYMBOL(_find_next_zero_bit_le);
+EXPORT_SYMBOL(_find_first_bit_le);
+EXPORT_SYMBOL(_find_next_bit_le);
+
+#ifdef __ARMEB__
+EXPORT_SYMBOL(_find_first_zero_bit_be);
+EXPORT_SYMBOL(_find_next_zero_bit_be);
+EXPORT_SYMBOL(_find_first_bit_be);
+EXPORT_SYMBOL(_find_next_bit_be);
+#endif
+
+#ifdef CONFIG_FUNCTION_TRACER
+#ifdef CONFIG_OLD_MCOUNT
+EXPORT_SYMBOL(mcount);
+#endif
+EXPORT_SYMBOL(__gnu_mcount_nc);
+#endif
+
+#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
+EXPORT_SYMBOL(__pv_phys_pfn_offset);
+EXPORT_SYMBOL(__pv_offset);
+#endif
+
+#ifdef CONFIG_HAVE_ARM_SMCCC
+EXPORT_SYMBOL(arm_smccc_smc);
+EXPORT_SYMBOL(arm_smccc_hvc);
+#endif

arch/arm/kernel/entry-ftrace.S

@@ -7,7 +7,6 @@
 #include <asm/assembler.h>
 #include <asm/ftrace.h>
 #include <asm/unwind.h>
-#include <asm/export.h>
 
 #include "entry-header.S"
 
@@ -154,7 +153,6 @@ ENTRY(mcount)
 	__mcount _old
 #endif
 ENDPROC(mcount)
-EXPORT_SYMBOL(mcount)
 
 #ifdef CONFIG_DYNAMIC_FTRACE
 ENTRY(ftrace_caller_old)
@@ -207,7 +205,6 @@ UNWIND(.fnstart)
 #endif
 UNWIND(.fnend)
 ENDPROC(__gnu_mcount_nc)
-EXPORT_SYMBOL(__gnu_mcount_nc)
 
 #ifdef CONFIG_DYNAMIC_FTRACE
 ENTRY(ftrace_caller)

arch/arm/kernel/head.S

@@ -22,7 +22,6 @@
 #include <asm/memory.h>
 #include <asm/thread_info.h>
 #include <asm/pgtable.h>
-#include <asm/export.h>
 
 #if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_SEMIHOSTING)
 #include CONFIG_DEBUG_LL_INCLUDE
@@ -728,8 +727,6 @@ __pv_phys_pfn_offset:
 __pv_offset:
 	.quad	0
 	.size	__pv_offset, . -__pv_offset
-EXPORT_SYMBOL(__pv_phys_pfn_offset)
-EXPORT_SYMBOL(__pv_offset)
 #endif
 
 #include "head-common.S"

arch/arm/kernel/smccc-call.S

@@ -16,7 +16,6 @@
 #include <asm/opcodes-sec.h>
 #include <asm/opcodes-virt.h>
 #include <asm/unwind.h>
-#include <asm/export.h>
 
 	/*
 	 * Wrap c macros in asm macros to delay expansion until after the
@@ -52,7 +51,6 @@ UNWIND(	.fnend)
 ENTRY(arm_smccc_smc)
 	SMCCC SMCCC_SMC
 ENDPROC(arm_smccc_smc)
-EXPORT_SYMBOL(arm_smccc_smc)
 
 /*
  * void smccc_hvc(unsigned long a0, unsigned long a1, unsigned long a2,
@@ -62,4 +60,3 @@ EXPORT_SYMBOL(arm_smccc_smc)
 ENTRY(arm_smccc_hvc)
 	SMCCC SMCCC_HVC
 ENDPROC(arm_smccc_hvc)
-EXPORT_SYMBOL(arm_smccc_hvc)

arch/arm/kernel/traps.c

@@ -74,6 +74,26 @@ void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long
 		dump_mem("", "Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs));
 }
 
+void dump_backtrace_stm(u32 *stack, u32 instruction)
+{
+	char str[80], *p;
+	unsigned int x;
+	int reg;
+
+	for (reg = 10, x = 0, p = str; reg >= 0; reg--) {
+		if (instruction & BIT(reg)) {
+			p += sprintf(p, " r%d:%08x", reg, *stack--);
+			if (++x == 6) {
+				x = 0;
+				p = str;
+				printk("%s\n", str);
+			}
+		}
+	}
+	if (p != str)
+		printk("%s\n", str);
+}
+
 #ifndef CONFIG_ARM_UNWIND
 /*
  * Stack pointers should always be within the kernels view of

arch/arm/kernel/vmlinux-xip.lds.S

@@ -3,6 +3,9 @@
  * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>
  */
 
+/* No __ro_after_init data in the .rodata section - which will always be ro */
+#define RO_AFTER_INIT_DATA
+
 #include <asm-generic/vmlinux.lds.h>
 #include <asm/cache.h>
 #include <asm/thread_info.h>
@@ -223,6 +226,8 @@ SECTIONS
 		. = ALIGN(PAGE_SIZE);
 		__init_end = .;
 
+		*(.data..ro_after_init)
+
 		NOSAVE_DATA
 		CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES)
 		READ_MOSTLY_DATA(L1_CACHE_BYTES)

arch/arm/lib/ashldi3.S

@@ -28,7 +28,6 @@ Boston, MA 02110-1301, USA.  */
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/export.h>
 
 #ifdef __ARMEB__
 #define al r1
@@ -53,5 +52,3 @@ ENTRY(__aeabi_llsl)
 
 ENDPROC(__ashldi3)
 ENDPROC(__aeabi_llsl)
-EXPORT_SYMBOL(__ashldi3)
-EXPORT_SYMBOL(__aeabi_llsl)

arch/arm/lib/ashrdi3.S

@@ -28,7 +28,6 @@ Boston, MA 02110-1301, USA.  */
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/export.h>
 
 #ifdef __ARMEB__
 #define al r1
@@ -53,5 +52,3 @@ ENTRY(__aeabi_lasr)
 
 ENDPROC(__ashrdi3)
 ENDPROC(__aeabi_lasr)
-EXPORT_SYMBOL(__ashrdi3)
-EXPORT_SYMBOL(__aeabi_lasr)

arch/arm/lib/backtrace.S

@@ -10,6 +10,7 @@
  * 27/03/03 Ian Molton Clean up CONFIG_CPU
  *
  */
+#include <linux/kern_levels.h>
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 		.text
@@ -83,13 +84,13 @@ for_each_frame:	tst	frame, mask		@ Check for address exceptions
 		teq	r3, r1, lsr #11
 		ldreq	r0, [frame, #-8]	@ get sp
 		subeq	r0, r0, #4		@ point at the last arg
-		bleq	.Ldumpstm		@ dump saved registers
+		bleq	dump_backtrace_stm	@ dump saved registers
 
 1004:		ldr	r1, [sv_pc, #0]		@ if stmfd sp!, {..., fp, ip, lr, pc}
 		ldr	r3, .Ldsi		@ instruction exists,
 		teq	r3, r1, lsr #11
 		subeq	r0, frame, #16
-		bleq	.Ldumpstm		@ dump saved registers
+		bleq	dump_backtrace_stm	@ dump saved registers
 
 		teq	sv_fp, #0		@ zero saved fp means
 		beq	no_frame		@ no further frames
@@ -112,38 +113,6 @@ ENDPROC(c_backtrace)
 		.long	1004b, 1006b
 		.popsection
 
-#define instr r4
-#define reg   r5
-#define stack r6
-
-.Ldumpstm:	stmfd	sp!, {instr, reg, stack, r7, lr}
-		mov	stack, r0
-		mov	instr, r1
-		mov	reg, #10
-		mov	r7, #0
-1:		mov	r3, #1
- ARM(		tst	instr, r3, lsl reg	)
- THUMB(		lsl	r3, reg			)
- THUMB(		tst	instr, r3		)
-		beq	2f
-		add	r7, r7, #1
-		teq	r7, #6
-		moveq	r7, #0
-		adr	r3, .Lcr
-		addne	r3, r3, #1		@ skip newline
-		ldr	r2, [stack], #-4
-		mov	r1, reg
-		adr	r0, .Lfp
-		bl	printk
-2:		subs	reg, reg, #1
-		bpl	1b
-		teq	r7, #0
-		adrne	r0, .Lcr
-		blne	printk
-		ldmfd	sp!, {instr, reg, stack, r7, pc}
-
-.Lfp:		.asciz	" r%d:%08x%s"
-.Lcr:		.asciz	"\n"
 .Lbad:		.asciz	"Backtrace aborted due to bad frame pointer <%p>\n"
 		.align
 .Ldsi:		.word	0xe92dd800 >> 11	@ stmfd sp!, {... fp, ip, lr, pc}

arch/arm/lib/bitops.h

@@ -1,6 +1,5 @@
 #include <asm/assembler.h>
 #include <asm/unwind.h>
-#include <asm/export.h>
 
 #if __LINUX_ARM_ARCH__ >= 6
 	.macro	bitop, name, instr
@@ -26,7 +25,6 @@ UNWIND(	.fnstart	)
 	bx	lr
 UNWIND(	.fnend		)
 ENDPROC(\name		)
-EXPORT_SYMBOL(\name	)
 	.endm
 
 	.macro	testop, name, instr, store
@@ -57,7 +55,6 @@ UNWIND(	.fnstart	)
 2:	bx	lr
 UNWIND(	.fnend		)
 ENDPROC(\name		)
-EXPORT_SYMBOL(\name	)
 	.endm
 #else
 	.macro	bitop, name, instr
@@ -77,7 +74,6 @@ UNWIND(	.fnstart	)
 	ret	lr
 UNWIND(	.fnend		)
 ENDPROC(\name		)
-EXPORT_SYMBOL(\name	)
 	.endm
 
 /**
@@ -106,6 +102,5 @@ UNWIND(	.fnstart	)
 	ret	lr
 UNWIND(	.fnend		)
 ENDPROC(\name		)
-EXPORT_SYMBOL(\name	)
 	.endm
 #endif

arch/arm/lib/bswapsdi2.S

@@ -1,6 +1,5 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/export.h>
 
 #if __LINUX_ARM_ARCH__ >= 6
 ENTRY(__bswapsi2)
@@ -36,5 +35,3 @@ ENTRY(__bswapdi2)
 	ret lr
 ENDPROC(__bswapdi2)
 #endif
-EXPORT_SYMBOL(__bswapsi2)
-EXPORT_SYMBOL(__bswapdi2)

arch/arm/lib/clear_user.S

@@ -10,7 +10,6 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/unwind.h>
-#include <asm/export.h>
 
 		.text
 
@@ -51,9 +50,6 @@ USER(		strnebt	r2, [r0])
 UNWIND(.fnend)
 ENDPROC(arm_clear_user)
 ENDPROC(__clear_user_std)
-#ifndef CONFIG_UACCESS_WITH_MEMCPY
-EXPORT_SYMBOL(arm_clear_user)
-#endif
 
 		.pushsection .text.fixup,"ax"
 		.align	0

arch/arm/lib/copy_from_user.S

@@ -13,7 +13,6 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/unwind.h>
-#include <asm/export.h>
 
 /*
  * Prototype:
@@ -95,7 +94,6 @@ ENTRY(arm_copy_from_user)
 #include "copy_template.S"
 
 ENDPROC(arm_copy_from_user)
-EXPORT_SYMBOL(arm_copy_from_user)
 
 	.pushsection .fixup,"ax"
 	.align 0

arch/arm/lib/copy_page.S

@@ -13,7 +13,6 @@
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
 #include <asm/cache.h>
-#include <asm/export.h>
 
 #define COPY_COUNT (PAGE_SZ / (2 * L1_CACHE_BYTES) PLD( -1 ))
 
@@ -46,4 +45,3 @@ ENTRY(copy_page)
 	PLD(	beq	2b			)
 		ldmfd	sp!, {r4, pc}			@	3
 ENDPROC(copy_page)
-EXPORT_SYMBOL(copy_page)

arch/arm/lib/copy_to_user.S

@@ -13,7 +13,6 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/unwind.h>
-#include <asm/export.h>
 
 /*
  * Prototype:
@@ -100,9 +99,6 @@ WEAK(arm_copy_to_user)
 
 ENDPROC(arm_copy_to_user)
 ENDPROC(__copy_to_user_std)
-#ifndef CONFIG_UACCESS_WITH_MEMCPY
-EXPORT_SYMBOL(arm_copy_to_user)
-#endif
 
 	.pushsection .text.fixup,"ax"
 	.align 0

arch/arm/lib/csumipv6.S

@@ -9,7 +9,6 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/export.h>
 
 		.text
 
@@ -31,4 +30,4 @@ ENTRY(__csum_ipv6_magic)
 		adcs	r0, r0, #0
 		ldmfd	sp!, {pc}
 ENDPROC(__csum_ipv6_magic)
-EXPORT_SYMBOL(__csum_ipv6_magic)
+

arch/arm/lib/csumpartial.S

@@ -9,7 +9,6 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/export.h>
 
 		.text
 
@@ -141,4 +140,3 @@ ENTRY(csum_partial)
 		bne	4b
 		b	.Lless4
 ENDPROC(csum_partial)
-EXPORT_SYMBOL(csum_partial)

arch/arm/lib/csumpartialcopy.S

@@ -49,6 +49,5 @@
 
 #define FN_ENTRY	ENTRY(csum_partial_copy_nocheck)
 #define FN_EXIT		ENDPROC(csum_partial_copy_nocheck)
-#define FN_EXPORT	EXPORT_SYMBOL(csum_partial_copy_nocheck)
 
 #include "csumpartialcopygeneric.S"

arch/arm/lib/csumpartialcopygeneric.S

@@ -8,7 +8,6 @@
  * published by the Free Software Foundation.
  */
 #include <asm/assembler.h>
-#include <asm/export.h>
 
 /*
  * unsigned int
@@ -332,4 +331,3 @@ FN_ENTRY
 		mov	r5, r4, get_byte_1
 		b	.Lexit
 FN_EXIT
-FN_EXPORT

arch/arm/lib/csumpartialcopyuser.S

@@ -73,7 +73,6 @@
 
 #define FN_ENTRY	ENTRY(csum_partial_copy_from_user)
 #define FN_EXIT		ENDPROC(csum_partial_copy_from_user)
-#define FN_EXPORT	EXPORT_SYMBOL(csum_partial_copy_from_user)
 
 #include "csumpartialcopygeneric.S"
 

arch/arm/lib/delay.c

@@ -24,7 +24,6 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/export.h>
 #include <linux/timex.h>
 
 /*
@@ -35,7 +34,6 @@ struct arm_delay_ops arm_delay_ops __ro_after_init = {
 	.const_udelay	= __loop_const_udelay,
 	.udelay		= __loop_udelay,
 };
-EXPORT_SYMBOL(arm_delay_ops);
 
 static const struct delay_timer *delay_timer;
 static bool delay_calibrated;

arch/arm/lib/div64.S

@@ -15,7 +15,6 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/unwind.h>
-#include <asm/export.h>
 
 #ifdef __ARMEB__
 #define xh r0
@@ -211,4 +210,3 @@ Ldiv0_64:
 
 UNWIND(.fnend)
 ENDPROC(__do_div64)
-EXPORT_SYMBOL(__do_div64)

arch/arm/lib/findbit.S

@@ -15,7 +15,6 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/export.h>
                 .text
 
 /*
@@ -38,7 +37,6 @@ ENTRY(_find_first_zero_bit_le)
 3:		mov	r0, r1			@ no free bits
 		ret	lr
 ENDPROC(_find_first_zero_bit_le)
-EXPORT_SYMBOL(_find_first_zero_bit_le)
 
 /*
  * Purpose  : Find next 'zero' bit
@@ -59,7 +57,6 @@ ENTRY(_find_next_zero_bit_le)
 		add	r2, r2, #1		@ align bit pointer
 		b	2b			@ loop for next bit
 ENDPROC(_find_next_zero_bit_le)
-EXPORT_SYMBOL(_find_next_zero_bit_le)
 
 /*
  * Purpose  : Find a 'one' bit
@@ -81,7 +78,6 @@ ENTRY(_find_first_bit_le)
 3:		mov	r0, r1			@ no free bits
 		ret	lr
 ENDPROC(_find_first_bit_le)
-EXPORT_SYMBOL(_find_first_bit_le)
 
 /*
  * Purpose  : Find next 'one' bit
@@ -101,7 +97,6 @@ ENTRY(_find_next_bit_le)
 		add	r2, r2, #1		@ align bit pointer
 		b	2b			@ loop for next bit
 ENDPROC(_find_next_bit_le)
-EXPORT_SYMBOL(_find_next_bit_le)
 
 #ifdef __ARMEB__
 
@@ -121,7 +116,6 @@ ENTRY(_find_first_zero_bit_be)
 3:		mov	r0, r1			@ no free bits
 		ret	lr
 ENDPROC(_find_first_zero_bit_be)
-EXPORT_SYMBOL(_find_first_zero_bit_be)
 
 ENTRY(_find_next_zero_bit_be)
 		teq	r1, #0
@@ -139,7 +133,6 @@ ENTRY(_find_next_zero_bit_be)
 		add	r2, r2, #1		@ align bit pointer
 		b	2b			@ loop for next bit
 ENDPROC(_find_next_zero_bit_be)
-EXPORT_SYMBOL(_find_next_zero_bit_be)
 
 ENTRY(_find_first_bit_be)
 		teq	r1, #0
@@ -157,7 +150,6 @@ ENTRY(_find_first_bit_be)
 3:		mov	r0, r1			@ no free bits
 		ret	lr
 ENDPROC(_find_first_bit_be)
-EXPORT_SYMBOL(_find_first_bit_be)
 
 ENTRY(_find_next_bit_be)
 		teq	r1, #0
@@ -174,7 +166,6 @@ ENTRY(_find_next_bit_be)
 		add	r2, r2, #1		@ align bit pointer
 		b	2b			@ loop for next bit
 ENDPROC(_find_next_bit_be)
-EXPORT_SYMBOL(_find_next_bit_be)
 
 #endif
 

arch/arm/lib/getuser.S

@@ -31,7 +31,6 @@
 #include <asm/assembler.h>
 #include <asm/errno.h>
 #include <asm/domain.h>
-#include <asm/export.h>
 
 ENTRY(__get_user_1)
 	check_uaccess r0, 1, r1, r2, __get_user_bad
@@ -39,7 +38,6 @@ ENTRY(__get_user_1)
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_1)
-EXPORT_SYMBOL(__get_user_1)
 
 ENTRY(__get_user_2)
 	check_uaccess r0, 2, r1, r2, __get_user_bad
@@ -60,7 +58,6 @@ rb	.req	r0
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_2)
-EXPORT_SYMBOL(__get_user_2)
 
 ENTRY(__get_user_4)
 	check_uaccess r0, 4, r1, r2, __get_user_bad
@@ -68,7 +65,6 @@ ENTRY(__get_user_4)
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_4)
-EXPORT_SYMBOL(__get_user_4)
 
 ENTRY(__get_user_8)
 	check_uaccess r0, 8, r1, r2, __get_user_bad
@@ -82,7 +78,6 @@ ENTRY(__get_user_8)
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_8)
-EXPORT_SYMBOL(__get_user_8)
 
 #ifdef __ARMEB__
 ENTRY(__get_user_32t_8)
@@ -96,7 +91,6 @@ ENTRY(__get_user_32t_8)
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_32t_8)
-EXPORT_SYMBOL(__get_user_32t_8)
 
 ENTRY(__get_user_64t_1)
 	check_uaccess r0, 1, r1, r2, __get_user_bad8
@@ -104,7 +98,6 @@ ENTRY(__get_user_64t_1)
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_64t_1)
-EXPORT_SYMBOL(__get_user_64t_1)
 
 ENTRY(__get_user_64t_2)
 	check_uaccess r0, 2, r1, r2, __get_user_bad8
@@ -121,7 +114,6 @@ rb	.req	r0
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_64t_2)
-EXPORT_SYMBOL(__get_user_64t_2)
 
 ENTRY(__get_user_64t_4)
 	check_uaccess r0, 4, r1, r2, __get_user_bad8
@@ -129,7 +121,6 @@ ENTRY(__get_user_64t_4)
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_64t_4)
-EXPORT_SYMBOL(__get_user_64t_4)
 #endif
 
 __get_user_bad8:

arch/arm/lib/io-readsb.S

@@ -9,7 +9,6 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/export.h>
 
 .Linsb_align:	rsb	ip, ip, #4
 		cmp	ip, r2
@@ -122,4 +121,3 @@ ENTRY(__raw_readsb)
 
 		ldmfd	sp!, {r4 - r6, pc}
 ENDPROC(__raw_readsb)
-EXPORT_SYMBOL(__raw_readsb)

arch/arm/lib/io-readsl.S

@@ -9,7 +9,6 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/export.h>
 
 ENTRY(__raw_readsl)
 		teq	r2, #0		@ do we have to check for the zero len?
@@ -78,4 +77,3 @@ ENTRY(__raw_readsl)
 		strb	r3, [r1, #0]
 		ret	lr
 ENDPROC(__raw_readsl)
-EXPORT_SYMBOL(__raw_readsl)

arch/arm/lib/io-readsw-armv3.S

@@ -9,7 +9,6 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/export.h>
 
 .Linsw_bad_alignment:
 		adr	r0, .Linsw_bad_align_msg
@@ -104,4 +103,4 @@ ENTRY(__raw_readsw)
 
 		ldmfd	sp!, {r4, r5, r6, pc}
 
-EXPORT_SYMBOL(__raw_readsw)
+

arch/arm/lib/io-readsw-armv4.S

@@ -9,7 +9,6 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/export.h>
 
 		.macro	pack, rd, hw1, hw2
 #ifndef __ARMEB__
@@ -130,4 +129,3 @@ ENTRY(__raw_readsw)
 		strneb	ip, [r1]
 		ldmfd	sp!, {r4, pc}
 ENDPROC(__raw_readsw)
-EXPORT_SYMBOL(__raw_readsw)

arch/arm/lib/io-writesb.S

@@ -9,7 +9,6 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/export.h>
 
 		.macro	outword, rd
 #ifndef __ARMEB__
@@ -93,4 +92,3 @@ ENTRY(__raw_writesb)
 
 		ldmfd	sp!, {r4, r5, pc}
 ENDPROC(__raw_writesb)
-EXPORT_SYMBOL(__raw_writesb)

arch/arm/lib/io-writesl.S

@@ -9,7 +9,6 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/export.h>
 
 ENTRY(__raw_writesl)
 		teq	r2, #0		@ do we have to check for the zero len?
@@ -66,4 +65,3 @@ ENTRY(__raw_writesl)
 		bne	6b
 		ret	lr
 ENDPROC(__raw_writesl)
-EXPORT_SYMBOL(__raw_writesl)

arch/arm/lib/io-writesw-armv3.S

@@ -9,7 +9,6 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/export.h>
 
 .Loutsw_bad_alignment:
 		adr	r0, .Loutsw_bad_align_msg
@@ -125,4 +124,3 @@ ENTRY(__raw_writesw)
 		strne	ip, [r0]
 
 		ldmfd	sp!, {r4, r5, r6, pc}
-EXPORT_SYMBOL(__raw_writesw)

arch/arm/lib/io-writesw-armv4.S

@@ -9,7 +9,6 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/export.h>
 
 		.macro	outword, rd
 #ifndef __ARMEB__
@@ -99,4 +98,3 @@ ENTRY(__raw_writesw)
 		strneh	ip, [r0]
 		ret	lr
 ENDPROC(__raw_writesw)
-EXPORT_SYMBOL(__raw_writesw)

arch/arm/lib/lib1funcs.S

@@ -36,7 +36,6 @@ Boston, MA 02111-1307, USA.  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/unwind.h>
-#include <asm/export.h>
 
 .macro ARM_DIV_BODY dividend, divisor, result, curbit
 
@@ -239,8 +238,6 @@ UNWIND(.fnstart)
 UNWIND(.fnend)
 ENDPROC(__udivsi3)
 ENDPROC(__aeabi_uidiv)
-EXPORT_SYMBOL(__udivsi3)
-EXPORT_SYMBOL(__aeabi_uidiv)
 
 ENTRY(__umodsi3)
 UNWIND(.fnstart)
@@ -259,7 +256,6 @@ UNWIND(.fnstart)
 
 UNWIND(.fnend)
 ENDPROC(__umodsi3)
-EXPORT_SYMBOL(__umodsi3)
 
 #ifdef CONFIG_ARM_PATCH_IDIV
 	.align 3
@@ -307,8 +303,6 @@ UNWIND(.fnstart)
 UNWIND(.fnend)
 ENDPROC(__divsi3)
 ENDPROC(__aeabi_idiv)
-EXPORT_SYMBOL(__divsi3)
-EXPORT_SYMBOL(__aeabi_idiv)
 
 ENTRY(__modsi3)
 UNWIND(.fnstart)
@@ -333,7 +327,6 @@ UNWIND(.fnstart)
 
 UNWIND(.fnend)
 ENDPROC(__modsi3)
-EXPORT_SYMBOL(__modsi3)
 
 #ifdef CONFIG_AEABI
 
@@ -350,7 +343,6 @@ UNWIND(.save {r0, r1, ip, lr}	)
 
 UNWIND(.fnend)
 ENDPROC(__aeabi_uidivmod)
-EXPORT_SYMBOL(__aeabi_uidivmod)
 
 ENTRY(__aeabi_idivmod)
 UNWIND(.fnstart)
@@ -364,7 +356,6 @@ UNWIND(.save {r0, r1, ip, lr}	)
 
 UNWIND(.fnend)
 ENDPROC(__aeabi_idivmod)
-EXPORT_SYMBOL(__aeabi_idivmod)
 
 #endif
 

arch/arm/lib/lshrdi3.S

@@ -28,7 +28,6 @@ Boston, MA 02110-1301, USA.  */
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/export.h>
 
 #ifdef __ARMEB__
 #define al r1
@@ -53,5 +52,3 @@ ENTRY(__aeabi_llsr)
 
 ENDPROC(__lshrdi3)
 ENDPROC(__aeabi_llsr)
-EXPORT_SYMBOL(__lshrdi3)
-EXPORT_SYMBOL(__aeabi_llsr)

arch/arm/lib/memchr.S

@@ -11,7 +11,6 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/export.h>
 
 	.text
 	.align	5
@@ -25,4 +24,3 @@ ENTRY(memchr)
 2:	movne	r0, #0
 	ret	lr
 ENDPROC(memchr)
-EXPORT_SYMBOL(memchr)

arch/arm/lib/memcpy.S

@@ -13,7 +13,6 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/unwind.h>
-#include <asm/export.h>
 
 #define LDR1W_SHIFT	0
 #define STR1W_SHIFT	0
@@ -69,5 +68,3 @@ ENTRY(memcpy)
 
 ENDPROC(memcpy)
 ENDPROC(mmiocpy)
-EXPORT_SYMBOL(memcpy)
-EXPORT_SYMBOL(mmiocpy)

arch/arm/lib/memmove.S

@@ -13,7 +13,6 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/unwind.h>
-#include <asm/export.h>
 
 		.text
 
@@ -226,4 +225,3 @@ ENTRY(memmove)
 18:		backward_copy_shift	push=24	pull=8
 
 ENDPROC(memmove)
-EXPORT_SYMBOL(memmove)

arch/arm/lib/memset.S

@@ -12,7 +12,6 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/unwind.h>
-#include <asm/export.h>
 
 	.text
 	.align	5
@@ -136,5 +135,3 @@ UNWIND( .fnstart            )
 UNWIND( .fnend   )
 ENDPROC(memset)
 ENDPROC(mmioset)
-EXPORT_SYMBOL(memset)
-EXPORT_SYMBOL(mmioset)

arch/arm/lib/memzero.S

@@ -10,7 +10,6 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/unwind.h>
-#include <asm/export.h>
 
 	.text
 	.align	5
@@ -136,4 +135,3 @@ UNWIND(	.fnstart			)
 	ret	lr			@ 1
 UNWIND(	.fnend				)
 ENDPROC(__memzero)
-EXPORT_SYMBOL(__memzero)

arch/arm/lib/muldi3.S

@@ -12,7 +12,6 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/export.h>
 
 #ifdef __ARMEB__
 #define xh r0
@@ -47,5 +46,3 @@ ENTRY(__aeabi_lmul)
 
 ENDPROC(__muldi3)
 ENDPROC(__aeabi_lmul)
-EXPORT_SYMBOL(__muldi3)
-EXPORT_SYMBOL(__aeabi_lmul)

arch/arm/lib/putuser.S

@@ -31,7 +31,6 @@
 #include <asm/assembler.h>
 #include <asm/errno.h>
 #include <asm/domain.h>
-#include <asm/export.h>
 
 ENTRY(__put_user_1)
 	check_uaccess r0, 1, r1, ip, __put_user_bad
@@ -39,7 +38,6 @@ ENTRY(__put_user_1)
 	mov	r0, #0
 	ret	lr
 ENDPROC(__put_user_1)
-EXPORT_SYMBOL(__put_user_1)
 
 ENTRY(__put_user_2)
 	check_uaccess r0, 2, r1, ip, __put_user_bad
@@ -64,7 +62,6 @@ ENTRY(__put_user_2)
 	mov	r0, #0
 	ret	lr
 ENDPROC(__put_user_2)
-EXPORT_SYMBOL(__put_user_2)
 
 ENTRY(__put_user_4)
 	check_uaccess r0, 4, r1, ip, __put_user_bad
@@ -72,7 +69,6 @@ ENTRY(__put_user_4)
 	mov	r0, #0
 	ret	lr
 ENDPROC(__put_user_4)
-EXPORT_SYMBOL(__put_user_4)
 
 ENTRY(__put_user_8)
 	check_uaccess r0, 8, r1, ip, __put_user_bad
@@ -86,7 +82,6 @@ ENTRY(__put_user_8)
 	mov	r0, #0
 	ret	lr
 ENDPROC(__put_user_8)
-EXPORT_SYMBOL(__put_user_8)
 
 __put_user_bad:
 	mov	r0, #-EFAULT

arch/arm/lib/strchr.S

@@ -11,7 +11,6 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/export.h>
 
 		.text
 		.align	5
@@ -26,4 +25,3 @@ ENTRY(strchr)
 		subeq	r0, r0, #1
 		ret	lr
 ENDPROC(strchr)
-EXPORT_SYMBOL(strchr)

arch/arm/lib/strrchr.S

@@ -11,7 +11,6 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/export.h>
 
 		.text
 		.align	5
@@ -25,4 +24,3 @@ ENTRY(strrchr)
 		mov	r0, r3
 		ret	lr
 ENDPROC(strrchr)
-EXPORT_SYMBOL(strrchr)

arch/arm/lib/uaccess_with_memcpy.c

@@ -19,7 +19,6 @@
 #include <linux/gfp.h>
 #include <linux/highmem.h>
 #include <linux/hugetlb.h>
-#include <linux/export.h>
 #include <asm/current.h>
 #include <asm/page.h>
 
@@ -157,7 +156,6 @@ arm_copy_to_user(void __user *to, const void *from, unsigned long n)
 	}
 	return n;
 }
-EXPORT_SYMBOL(arm_copy_to_user);
 	
 static unsigned long noinline
 __clear_user_memset(void __user *addr, unsigned long n)
@@ -215,7 +213,6 @@ unsigned long arm_clear_user(void __user *addr, unsigned long n)
 	}
 	return n;
 }
-EXPORT_SYMBOL(arm_clear_user);
 
 #if 0
 

arch/arm/lib/ucmpdi2.S

@@ -12,7 +12,6 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/export.h>
 
 #ifdef __ARMEB__
 #define xh r0
@@ -36,7 +35,6 @@ ENTRY(__ucmpdi2)
 	ret	lr
 
 ENDPROC(__ucmpdi2)
-EXPORT_SYMBOL(__ucmpdi2)
 
 #ifdef CONFIG_AEABI
 
@@ -50,7 +48,6 @@ ENTRY(__aeabi_ulcmp)
 	ret	lr
 
 ENDPROC(__aeabi_ulcmp)
-EXPORT_SYMBOL(__aeabi_ulcmp)
 
 #endif
 

arch/arm/mach-imx/Makefile

@@ -32,6 +32,7 @@ endif
 
 ifdef CONFIG_SND_IMX_SOC
 obj-y += ssi-fiq.o
+obj-y += ssi-fiq-ksym.o
 endif
 
 # i.MX21 based machines

arch/arm/mach-imx/ssi-fiq-ksym.c

@@ -0,0 +1,20 @@
+/*
+ * Exported ksyms for the SSI FIQ handler
+ *
+ * Copyright (C) 2009, Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+
+#include <linux/platform_data/asoc-imx-ssi.h>
+
+EXPORT_SYMBOL(imx_ssi_fiq_tx_buffer);
+EXPORT_SYMBOL(imx_ssi_fiq_rx_buffer);
+EXPORT_SYMBOL(imx_ssi_fiq_start);
+EXPORT_SYMBOL(imx_ssi_fiq_end);
+EXPORT_SYMBOL(imx_ssi_fiq_base);
+

arch/arm/mach-imx/ssi-fiq.S

@@ -8,7 +8,6 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/export.h>
 
 /*
  * r8  = bit 0-15: tx offset, bit 16-31: tx buffer size
@@ -145,8 +144,4 @@ imx_ssi_fiq_tx_buffer:
 		.word 0x0
 .L_imx_ssi_fiq_end:
 imx_ssi_fiq_end:
-EXPORT_SYMBOL(imx_ssi_fiq_tx_buffer)
-EXPORT_SYMBOL(imx_ssi_fiq_rx_buffer)
-EXPORT_SYMBOL(imx_ssi_fiq_start)
-EXPORT_SYMBOL(imx_ssi_fiq_end)
-EXPORT_SYMBOL(imx_ssi_fiq_base)
+

arch/arm/mach-omap2/Kconfig

@@ -71,6 +71,7 @@ config SOC_AM43XX
 	select HAVE_ARM_TWD
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_775420
+	select OMAP_INTERCONNECT
 
 config SOC_DRA7XX
 	bool "TI DRA7XX"

arch/arm/mach-omap2/id.c

@@ -205,11 +205,15 @@ void __init omap2xxx_check_revision(void)
 
 #define OMAP3_SHOW_FEATURE(feat)		\
 	if (omap3_has_ ##feat())		\
-		printk(#feat" ");
+		n += scnprintf(buf + n, sizeof(buf) - n, #feat " ");
 
 static void __init omap3_cpuinfo(void)
 {
 	const char *cpu_name;
+	char buf[64];
+	int n = 0;
+
+	memset(buf, 0, sizeof(buf));
 
 	/*
 	 * OMAP3430 and OMAP3530 are assumed to be same.
@@ -241,10 +245,10 @@ static void __init omap3_cpuinfo(void)
 		cpu_name = "OMAP3503";
 	}
 
-	sprintf(soc_name, "%s", cpu_name);
+	scnprintf(soc_name, sizeof(soc_name), "%s", cpu_name);
 
 	/* Print verbose information */
-	pr_info("%s %s (", soc_name, soc_rev);
+	n += scnprintf(buf, sizeof(buf) - n, "%s %s (", soc_name, soc_rev);
 
 	OMAP3_SHOW_FEATURE(l2cache);
 	OMAP3_SHOW_FEATURE(iva);
@@ -252,8 +256,10 @@ static void __init omap3_cpuinfo(void)
 	OMAP3_SHOW_FEATURE(neon);
 	OMAP3_SHOW_FEATURE(isp);
 	OMAP3_SHOW_FEATURE(192mhz_clk);
-
-	printk(")\n");
+	if (*(buf + n - 1) == ' ')
+		n--;
+	n += scnprintf(buf + n, sizeof(buf) - n, ")\n");
+	pr_info("%s", buf);
 }
 
 #define OMAP3_CHECK_FEATURE(status,feat)				\

arch/arm/mach-omap2/prm3xxx.c

@@ -319,6 +319,9 @@ void __init omap3_prm_init_pm(bool has_uart4, bool has_iva)
 	if (has_uart4) {
 		en_uart4_mask = OMAP3630_EN_UART4_MASK;
 		grpsel_uart4_mask = OMAP3630_GRPSEL_UART4_MASK;
+	} else {
+		en_uart4_mask = 0;
+		grpsel_uart4_mask = 0;
 	}
 
 	/* Enable wakeups in PER */

arch/arm/mach-omap2/voltage.c

@@ -87,6 +87,12 @@ int voltdm_scale(struct voltagedomain *voltdm,
 		return -ENODATA;
 	}
 
+	if (!voltdm->volt_data) {
+		pr_err("%s: No voltage data defined for vdd_%s\n",
+			__func__, voltdm->name);
+		return -ENODATA;
+	}
+
 	/* Adjust voltage to the exact voltage from the OPP table */
 	for (i = 0; voltdm->volt_data[i].volt_nominal != 0; i++) {
 		if (voltdm->volt_data[i].volt_nominal >= target_volt) {

arch/arm/mm/dma-mapping.c

@@ -1167,7 +1167,7 @@ static int __init dma_debug_do_init(void)
 	dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);
 	return 0;
 }
-fs_initcall(dma_debug_do_init);
+core_initcall(dma_debug_do_init);
 
 #ifdef CONFIG_ARM_DMA_USE_IOMMU
 

arch/arm/mm/proc-v7m.S

@@ -96,7 +96,7 @@ ENTRY(cpu_cm7_proc_fin)
 	ret	lr
 ENDPROC(cpu_cm7_proc_fin)
 
-	.section ".text.init", #alloc, #execinstr
+	.section ".init.text", #alloc, #execinstr
 
 __v7m_cm7_setup:
 	mov	r8, #(V7M_SCB_CCR_DC | V7M_SCB_CCR_IC| V7M_SCB_CCR_BP)

arch/arm64/boot/dts/marvell/armada-37xx.dtsi

@@ -105,7 +105,7 @@
 				status = "disabled";
 			};
 
-			nb_perih_clk: nb-periph-clk@13000{
+			nb_periph_clk: nb-periph-clk@13000 {
 				compatible = "marvell,armada-3700-periph-clock-nb";
 				reg = <0x13000 0x100>;
 				clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
@@ -113,7 +113,7 @@
 				#clock-cells = <1>;
 			};
 
-			sb_perih_clk: sb-periph-clk@18000{
+			sb_periph_clk: sb-periph-clk@18000 {
 				compatible = "marvell,armada-3700-periph-clock-sb";
 				reg = <0x18000 0x100>;
 				clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,

arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi

@@ -130,8 +130,8 @@
 				reg = <0x700600 0x50>;
 				#address-cells = <0x1>;
 				#size-cells = <0x0>;
-				cell-index = <1>;
-				clocks = <&cps_syscon0 0 3>;
+				cell-index = <3>;
+				clocks = <&cps_syscon0 1 21>;
 				status = "disabled";
 			};
 
@@ -140,7 +140,7 @@
 				reg = <0x700680 0x50>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				cell-index = <2>;
+				cell-index = <4>;
 				clocks = <&cps_syscon0 1 21>;
 				status = "disabled";
 			};

arch/arm64/include/asm/perf_event.h

@@ -46,7 +46,15 @@
 #define	ARMV8_PMU_EVTYPE_MASK	0xc800ffff	/* Mask for writable bits */
 #define	ARMV8_PMU_EVTYPE_EVENT	0xffff		/* Mask for EVENT bits */
 
-#define ARMV8_PMU_EVTYPE_EVENT_SW_INCR	0	/* Software increment event */
+/*
+ * PMUv3 event types: required events
+ */
+#define ARMV8_PMUV3_PERFCTR_SW_INCR				0x00
+#define ARMV8_PMUV3_PERFCTR_L1D_CACHE_REFILL			0x03
+#define ARMV8_PMUV3_PERFCTR_L1D_CACHE				0x04
+#define ARMV8_PMUV3_PERFCTR_BR_MIS_PRED				0x10
+#define ARMV8_PMUV3_PERFCTR_CPU_CYCLES				0x11
+#define ARMV8_PMUV3_PERFCTR_BR_PRED				0x12
 
 /*
  * Event filters for PMUv3

arch/arm64/kernel/perf_event.c

@@ -31,17 +31,9 @@
 
 /*
  * ARMv8 PMUv3 Performance Events handling code.
- * Common event types.
+ * Common event types (some are defined in asm/perf_event.h).
  */
 
-/* Required events. */
-#define ARMV8_PMUV3_PERFCTR_SW_INCR				0x00
-#define ARMV8_PMUV3_PERFCTR_L1D_CACHE_REFILL			0x03
-#define ARMV8_PMUV3_PERFCTR_L1D_CACHE				0x04
-#define ARMV8_PMUV3_PERFCTR_BR_MIS_PRED				0x10
-#define ARMV8_PMUV3_PERFCTR_CPU_CYCLES				0x11
-#define ARMV8_PMUV3_PERFCTR_BR_PRED				0x12
-
 /* At least one of the following is required. */
 #define ARMV8_PMUV3_PERFCTR_INST_RETIRED			0x08
 #define ARMV8_PMUV3_PERFCTR_INST_SPEC				0x1B

arch/arm64/kvm/sys_regs.c

@@ -597,8 +597,14 @@ static bool access_pmu_evcntr(struct kvm_vcpu *vcpu,
 
 			idx = ARMV8_PMU_CYCLE_IDX;
 		} else {
-			BUG();
+			return false;
 		}
+	} else if (r->CRn == 0 && r->CRm == 9) {
+		/* PMCCNTR */
+		if (pmu_access_event_counter_el0_disabled(vcpu))
+			return false;
+
+		idx = ARMV8_PMU_CYCLE_IDX;
 	} else if (r->CRn == 14 && (r->CRm & 12) == 8) {
 		/* PMEVCNTRn_EL0 */
 		if (pmu_access_event_counter_el0_disabled(vcpu))
@@ -606,7 +612,7 @@ static bool access_pmu_evcntr(struct kvm_vcpu *vcpu,
 
 		idx = ((r->CRm & 3) << 3) | (r->Op2 & 7);
 	} else {
-		BUG();
+		return false;
 	}
 
 	if (!pmu_counter_idx_valid(vcpu, idx))

arch/mips/include/asm/mipsregs.h

@@ -214,6 +214,12 @@
 #error Bad page size configuration for hugetlbfs!
 #endif
 
+/*
+ * Wired register bits
+ */
+#define MIPSR6_WIRED_LIMIT	(_ULCAST_(0xffff) << 16)
+#define MIPSR6_WIRED_WIRED	(_ULCAST_(0xffff) << 0)
+
 /*
  * Values used for computation of new tlb entries
  */

arch/mips/include/asm/tlb.h

@@ -1,6 +1,9 @@
 #ifndef __ASM_TLB_H
 #define __ASM_TLB_H
 
+#include <asm/cpu-features.h>
+#include <asm/mipsregs.h>
+
 /*
  * MIPS doesn't need any special per-pte or per-vma handling, except
  * we need to flush cache for area to be unmapped.
@@ -22,6 +25,16 @@
 		((CKSEG0 + ((idx) << (PAGE_SHIFT + 1))) |		\
 		 (cpu_has_tlbinv ? MIPS_ENTRYHI_EHINV : 0))
 
+static inline unsigned int num_wired_entries(void)
+{
+	unsigned int wired = read_c0_wired();
+
+	if (cpu_has_mips_r6)
+		wired &= MIPSR6_WIRED_WIRED;
+
+	return wired;
+}
+
 #include <asm-generic/tlb.h>
 
 #endif /* __ASM_TLB_H */

arch/mips/mm/fault.c

@@ -209,17 +209,18 @@ bad_area_nosemaphore:
 		if (show_unhandled_signals &&
 		    unhandled_signal(tsk, SIGSEGV) &&
 		    __ratelimit(&ratelimit_state)) {
-			pr_info("\ndo_page_fault(): sending SIGSEGV to %s for invalid %s %0*lx",
+			pr_info("do_page_fault(): sending SIGSEGV to %s for invalid %s %0*lx\n",
 				tsk->comm,
 				write ? "write access to" : "read access from",
 				field, address);
 			pr_info("epc = %0*lx in", field,
 				(unsigned long) regs->cp0_epc);
-			print_vma_addr(" ", regs->cp0_epc);
+			print_vma_addr(KERN_CONT " ", regs->cp0_epc);
+			pr_cont("\n");
 			pr_info("ra  = %0*lx in", field,
 				(unsigned long) regs->regs[31]);
-			print_vma_addr(" ", regs->regs[31]);
-			pr_info("\n");
+			print_vma_addr(KERN_CONT " ", regs->regs[31]);
+			pr_cont("\n");
 		}
 		current->thread.trap_nr = (regs->cp0_cause >> 2) & 0x1f;
 		info.si_signo = SIGSEGV;

arch/mips/mm/init.c

@@ -118,7 +118,7 @@ static void *__kmap_pgprot(struct page *page, unsigned long addr, pgprot_t prot)
 		writex_c0_entrylo1(entrylo);
 	}
 #endif
-	tlbidx = read_c0_wired();
+	tlbidx = num_wired_entries();
 	write_c0_wired(tlbidx + 1);
 	write_c0_index(tlbidx);
 	mtc0_tlbw_hazard();
@@ -147,7 +147,7 @@ void kunmap_coherent(void)
 
 	local_irq_save(flags);
 	old_ctx = read_c0_entryhi();
-	wired = read_c0_wired() - 1;
+	wired = num_wired_entries() - 1;
 	write_c0_wired(wired);
 	write_c0_index(wired);
 	write_c0_entryhi(UNIQUE_ENTRYHI(wired));

arch/mips/mm/tlb-r4k.c

@@ -65,7 +65,7 @@ void local_flush_tlb_all(void)
 	write_c0_entrylo0(0);
 	write_c0_entrylo1(0);
 
-	entry = read_c0_wired();
+	entry = num_wired_entries();
 
 	/*
 	 * Blast 'em all away.
@@ -385,7 +385,7 @@ void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
 	old_ctx = read_c0_entryhi();
 	htw_stop();
 	old_pagemask = read_c0_pagemask();
-	wired = read_c0_wired();
+	wired = num_wired_entries();
 	write_c0_wired(wired + 1);
 	write_c0_index(wired);
 	tlbw_use_hazard();	/* What is the hazard here? */
@@ -449,7 +449,7 @@ __init int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1,
 	htw_stop();
 	old_ctx = read_c0_entryhi();
 	old_pagemask = read_c0_pagemask();
-	wired = read_c0_wired();
+	wired = num_wired_entries();
 	if (--temp_tlb_entry < wired) {
 		printk(KERN_WARNING
 		       "No TLB space left for add_temporary_entry\n");

arch/parisc/Kconfig

@@ -34,7 +34,9 @@ config PARISC
 	select HAVE_ARCH_HASH
 	select HAVE_ARCH_SECCOMP_FILTER
 	select HAVE_ARCH_TRACEHOOK
-	select HAVE_UNSTABLE_SCHED_CLOCK if (SMP || !64BIT)
+	select GENERIC_SCHED_CLOCK
+	select HAVE_UNSTABLE_SCHED_CLOCK if SMP
+	select GENERIC_CLOCKEVENTS
 	select ARCH_NO_COHERENT_DMA_MMAP
 	select CPU_NO_EFFICIENT_FFS
 

arch/parisc/kernel/cache.c

@@ -369,6 +369,7 @@ void __init parisc_setup_cache_timing(void)
 {
 	unsigned long rangetime, alltime;
 	unsigned long size, start;
+	unsigned long threshold;
 
 	alltime = mfctl(16);
 	flush_data_cache();
@@ -382,17 +383,12 @@ void __init parisc_setup_cache_timing(void)
 	printk(KERN_DEBUG "Whole cache flush %lu cycles, flushing %lu bytes %lu cycles\n",
 		alltime, size, rangetime);
 
-	/* Racy, but if we see an intermediate value, it's ok too... */
-	parisc_cache_flush_threshold = size * alltime / rangetime;
-
-	parisc_cache_flush_threshold = L1_CACHE_ALIGN(parisc_cache_flush_threshold);
-	if (!parisc_cache_flush_threshold)
-		parisc_cache_flush_threshold = FLUSH_THRESHOLD;
-
-	if (parisc_cache_flush_threshold > cache_info.dc_size)
-		parisc_cache_flush_threshold = cache_info.dc_size;
-
-	printk(KERN_INFO "Setting cache flush threshold to %lu kB\n",
+	threshold = L1_CACHE_ALIGN(size * alltime / rangetime);
+	if (threshold > cache_info.dc_size)
+		threshold = cache_info.dc_size;
+	if (threshold)
+		parisc_cache_flush_threshold = threshold;
+	printk(KERN_INFO "Cache flush threshold set to %lu KiB\n",
 		parisc_cache_flush_threshold/1024);
 
 	/* calculate TLB flush threshold */
@@ -401,7 +397,7 @@ void __init parisc_setup_cache_timing(void)
 	flush_tlb_all();
 	alltime = mfctl(16) - alltime;
 
-	size = PAGE_SIZE;
+	size = 0;
 	start = (unsigned long) _text;
 	rangetime = mfctl(16);
 	while (start < (unsigned long) _end) {
@@ -414,13 +410,10 @@ void __init parisc_setup_cache_timing(void)
 	printk(KERN_DEBUG "Whole TLB flush %lu cycles, flushing %lu bytes %lu cycles\n",
 		alltime, size, rangetime);
 
-	parisc_tlb_flush_threshold = size * alltime / rangetime;
-	parisc_tlb_flush_threshold *= num_online_cpus();
-	parisc_tlb_flush_threshold = PAGE_ALIGN(parisc_tlb_flush_threshold);
-	if (!parisc_tlb_flush_threshold)
-		parisc_tlb_flush_threshold = FLUSH_TLB_THRESHOLD;
-
-	printk(KERN_INFO "Setting TLB flush threshold to %lu kB\n",
+	threshold = PAGE_ALIGN(num_online_cpus() * size * alltime / rangetime);
+	if (threshold)
+		parisc_tlb_flush_threshold = threshold;
+	printk(KERN_INFO "TLB flush threshold set to %lu KiB\n",
 		parisc_tlb_flush_threshold/1024);
 }
 

arch/parisc/kernel/inventory.c

@@ -58,7 +58,7 @@ void __init setup_pdc(void)
 	status = pdc_system_map_find_mods(&module_result, &module_path, 0);
 	if (status == PDC_OK) {
 		pdc_type = PDC_TYPE_SYSTEM_MAP;
-		printk("System Map.\n");
+		pr_cont("System Map.\n");
 		return;
 	}
 
@@ -77,7 +77,7 @@ void __init setup_pdc(void)
 	status = pdc_pat_cell_get_number(&cell_info);
 	if (status == PDC_OK) {
 		pdc_type = PDC_TYPE_PAT;
-		printk("64 bit PAT.\n");
+		pr_cont("64 bit PAT.\n");
 		return;
 	}
 #endif
@@ -97,12 +97,12 @@ void __init setup_pdc(void)
 	case 0xC:		/* 715/64, at least */
 
 		pdc_type = PDC_TYPE_SNAKE;
-		printk("Snake.\n");
+		pr_cont("Snake.\n");
 		return;
 
 	default:		/* Everything else */
 
-		printk("Unsupported.\n");
+		pr_cont("Unsupported.\n");
 		panic("If this is a 64-bit machine, please try a 64-bit kernel.\n");
 	}
 }

arch/parisc/kernel/pacache.S

@@ -96,7 +96,7 @@ fitmanyloop:					/* Loop if LOOP >= 2 */
 
 fitmanymiddle:					/* Loop if LOOP >= 2 */
 	addib,COND(>)		-1, %r31, fitmanymiddle	/* Adjusted inner loop decr */
-	pitlbe		0(%sr1, %r28)
+	pitlbe		%r0(%sr1, %r28)
 	pitlbe,m	%arg1(%sr1, %r28)	/* Last pitlbe and addr adjust */
 	addib,COND(>)		-1, %r29, fitmanymiddle	/* Middle loop decr */
 	copy		%arg3, %r31		/* Re-init inner loop count */
@@ -139,7 +139,7 @@ fdtmanyloop:					/* Loop if LOOP >= 2 */
 
 fdtmanymiddle:					/* Loop if LOOP >= 2 */
 	addib,COND(>)		-1, %r31, fdtmanymiddle	/* Adjusted inner loop decr */
-	pdtlbe		0(%sr1, %r28)
+	pdtlbe		%r0(%sr1, %r28)
 	pdtlbe,m	%arg1(%sr1, %r28)	/* Last pdtlbe and addr adjust */
 	addib,COND(>)		-1, %r29, fdtmanymiddle	/* Middle loop decr */
 	copy		%arg3, %r31		/* Re-init inner loop count */
@@ -626,12 +626,12 @@ ENTRY_CFI(copy_user_page_asm)
 	/* Purge any old translations */
 
 #ifdef CONFIG_PA20
-	pdtlb,l		0(%r28)
-	pdtlb,l		0(%r29)
+	pdtlb,l		%r0(%r28)
+	pdtlb,l		%r0(%r29)
 #else
 	tlb_lock	%r20,%r21,%r22
-	pdtlb		0(%r28)
-	pdtlb		0(%r29)
+	pdtlb		%r0(%r28)
+	pdtlb		%r0(%r29)
 	tlb_unlock	%r20,%r21,%r22
 #endif
 
@@ -774,10 +774,10 @@ ENTRY_CFI(clear_user_page_asm)
 	/* Purge any old translation */
 
 #ifdef CONFIG_PA20
-	pdtlb,l		0(%r28)
+	pdtlb,l		%r0(%r28)
 #else
 	tlb_lock	%r20,%r21,%r22
-	pdtlb		0(%r28)
+	pdtlb		%r0(%r28)
 	tlb_unlock	%r20,%r21,%r22
 #endif
 
@@ -858,10 +858,10 @@ ENTRY_CFI(flush_dcache_page_asm)
 	/* Purge any old translation */
 
 #ifdef CONFIG_PA20
-	pdtlb,l		0(%r28)
+	pdtlb,l		%r0(%r28)
 #else
 	tlb_lock	%r20,%r21,%r22
-	pdtlb		0(%r28)
+	pdtlb		%r0(%r28)
 	tlb_unlock	%r20,%r21,%r22
 #endif
 
@@ -898,10 +898,10 @@ ENTRY_CFI(flush_dcache_page_asm)
 	sync
 
 #ifdef CONFIG_PA20
-	pdtlb,l		0(%r25)
+	pdtlb,l		%r0(%r25)
 #else
 	tlb_lock	%r20,%r21,%r22
-	pdtlb		0(%r25)
+	pdtlb		%r0(%r25)
 	tlb_unlock	%r20,%r21,%r22
 #endif
 
@@ -931,13 +931,18 @@ ENTRY_CFI(flush_icache_page_asm)
 	depwi		0, 31,PAGE_SHIFT, %r28	/* Clear any offset bits */
 #endif
 
-	/* Purge any old translation */
+	/* Purge any old translation.  Note that the FIC instruction
+	 * may use either the instruction or data TLB.  Given that we
+	 * have a flat address space, it's not clear which TLB will be
+	 * used.  So, we purge both entries.  */
 
 #ifdef CONFIG_PA20
+	pdtlb,l		%r0(%r28)
 	pitlb,l         %r0(%sr4,%r28)
 #else
 	tlb_lock        %r20,%r21,%r22
-	pitlb           (%sr4,%r28)
+	pdtlb		%r0(%r28)
+	pitlb           %r0(%sr4,%r28)
 	tlb_unlock      %r20,%r21,%r22
 #endif
 
@@ -976,10 +981,12 @@ ENTRY_CFI(flush_icache_page_asm)
 	sync
 
 #ifdef CONFIG_PA20
+	pdtlb,l		%r0(%r28)
 	pitlb,l         %r0(%sr4,%r25)
 #else
 	tlb_lock        %r20,%r21,%r22
-	pitlb           (%sr4,%r25)
+	pdtlb		%r0(%r28)
+	pitlb           %r0(%sr4,%r25)
 	tlb_unlock      %r20,%r21,%r22
 #endif
 

arch/parisc/kernel/pci-dma.c

@@ -95,8 +95,8 @@ static inline int map_pte_uncached(pte_t * pte,
 
 		if (!pte_none(*pte))
 			printk(KERN_ERR "map_pte_uncached: page already exists\n");
-		set_pte(pte, __mk_pte(*paddr_ptr, PAGE_KERNEL_UNC));
 		purge_tlb_start(flags);
+		set_pte(pte, __mk_pte(*paddr_ptr, PAGE_KERNEL_UNC));
 		pdtlb_kernel(orig_vaddr);
 		purge_tlb_end(flags);
 		vaddr += PAGE_SIZE;

arch/parisc/kernel/setup.c

@@ -334,6 +334,10 @@ static int __init parisc_init(void)
 	/* tell PDC we're Linux. Nevermind failure. */
 	pdc_stable_write(0x40, &osid, sizeof(osid));
 	
+	/* start with known state */
+	flush_cache_all_local();
+	flush_tlb_all_local(NULL);
+
 	processor_init();
 #ifdef CONFIG_SMP
 	pr_info("CPU(s): %d out of %d %s at %d.%06d MHz online\n",

arch/parisc/kernel/time.c

@@ -14,6 +14,7 @@
 #include <linux/module.h>
 #include <linux/rtc.h>
 #include <linux/sched.h>
+#include <linux/sched_clock.h>
 #include <linux/kernel.h>
 #include <linux/param.h>
 #include <linux/string.h>
@@ -39,18 +40,6 @@
 
 static unsigned long clocktick __read_mostly;	/* timer cycles per tick */
 
-#ifndef CONFIG_64BIT
-/*
- * The processor-internal cycle counter (Control Register 16) is used as time
- * source for the sched_clock() function.  This register is 64bit wide on a
- * 64-bit kernel and 32bit on a 32-bit kernel. Since sched_clock() always
- * requires a 64bit counter we emulate on the 32-bit kernel the higher 32bits
- * with a per-cpu variable which we increase every time the counter
- * wraps-around (which happens every ~4 secounds).
- */
-static DEFINE_PER_CPU(unsigned long, cr16_high_32_bits);
-#endif
-
 /*
  * We keep time on PA-RISC Linux by using the Interval Timer which is
  * a pair of registers; one is read-only and one is write-only; both
@@ -121,12 +110,6 @@ irqreturn_t __irq_entry timer_interrupt(int irq, void *dev_id)
 	 */
 	mtctl(next_tick, 16);
 
-#if !defined(CONFIG_64BIT)
-	/* check for overflow on a 32bit kernel (every ~4 seconds). */
-	if (unlikely(next_tick < now))
-		this_cpu_inc(cr16_high_32_bits);
-#endif
-
 	/* Skip one clocktick on purpose if we missed next_tick.
 	 * The new CR16 must be "later" than current CR16 otherwise
 	 * itimer would not fire until CR16 wrapped - e.g 4 seconds
@@ -208,7 +191,7 @@ EXPORT_SYMBOL(profile_pc);
 
 /* clock source code */
 
-static cycle_t read_cr16(struct clocksource *cs)
+static cycle_t notrace read_cr16(struct clocksource *cs)
 {
 	return get_cycles();
 }
@@ -287,26 +270,9 @@ void read_persistent_clock(struct timespec *ts)
 }
 
 
-/*
- * sched_clock() framework
- */
-
-static u32 cyc2ns_mul __read_mostly;
-static u32 cyc2ns_shift __read_mostly;
-
-u64 sched_clock(void)
+static u64 notrace read_cr16_sched_clock(void)
 {
-	u64 now;
-
-	/* Get current cycle counter (Control Register 16). */
-#ifdef CONFIG_64BIT
-	now = mfctl(16);
-#else
-	now = mfctl(16) + (((u64) this_cpu_read(cr16_high_32_bits)) << 32);
-#endif
-
-	/* return the value in ns (cycles_2_ns) */
-	return mul_u64_u32_shr(now, cyc2ns_mul, cyc2ns_shift);
+	return get_cycles();
 }
 
 
@@ -316,17 +282,16 @@ u64 sched_clock(void)
 
 void __init time_init(void)
 {
-	unsigned long current_cr16_khz;
+	unsigned long cr16_hz;
 
-	current_cr16_khz = PAGE0->mem_10msec/10;  /* kHz */
 	clocktick = (100 * PAGE0->mem_10msec) / HZ;
-
-	/* calculate mult/shift values for cr16 */
-	clocks_calc_mult_shift(&cyc2ns_mul, &cyc2ns_shift, current_cr16_khz,
-				NSEC_PER_MSEC, 0);
-
 	start_cpu_itimer();	/* get CPU 0 started */
 
+	cr16_hz = 100 * PAGE0->mem_10msec;  /* Hz */
+
 	/* register at clocksource framework */
-	clocksource_register_khz(&clocksource_cr16, current_cr16_khz);
+	clocksource_register_hz(&clocksource_cr16, cr16_hz);
+
+	/* register as sched_clock source */
+	sched_clock_register(read_cr16_sched_clock, BITS_PER_LONG, cr16_hz);
 }

arch/powerpc/boot/main.c

@@ -232,8 +232,12 @@ void start(void)
 		console_ops.close();
 
 	kentry = (kernel_entry_t) vmlinux.addr;
-	if (ft_addr)
-		kentry(ft_addr, 0, NULL);
+	if (ft_addr) {
+		if(platform_ops.kentry)
+			platform_ops.kentry(ft_addr, vmlinux.addr);
+		else
+			kentry(ft_addr, 0, NULL);
+	}
 	else
 		kentry((unsigned long)initrd.addr, initrd.size,
 		       loader_info.promptr);

arch/powerpc/boot/opal-calls.S

@@ -12,6 +12,19 @@
 
 	.text
 
+	.globl opal_kentry
+opal_kentry:
+	/* r3 is the fdt ptr */
+	mtctr r4
+	li	r4, 0
+	li	r5, 0
+	li	r6, 0
+	li	r7, 0
+	ld	r11,opal@got(r2)
+	ld	r8,0(r11)
+	ld	r9,8(r11)
+	bctr
+
 #define OPAL_CALL(name, token)				\
 	.globl name;					\
 name:							\

arch/powerpc/boot/opal.c

@@ -23,14 +23,25 @@ struct opal {
 
 static u32 opal_con_id;
 
+/* see opal-wrappers.S */
 int64_t opal_console_write(int64_t term_number, u64 *length, const u8 *buffer);
 int64_t opal_console_read(int64_t term_number, uint64_t *length, u8 *buffer);
 int64_t opal_console_write_buffer_space(uint64_t term_number, uint64_t *length);
 int64_t opal_console_flush(uint64_t term_number);
 int64_t opal_poll_events(uint64_t *outstanding_event_mask);
 
+void opal_kentry(unsigned long fdt_addr, void *vmlinux_addr);
+
 static int opal_con_open(void)
 {
+	/*
+	 * When OPAL loads the boot kernel it stashes the OPAL base and entry
+	 * address in r8 and r9 so the kernel can use the OPAL console
+	 * before unflattening the devicetree. While executing the wrapper will
+	 * probably trash r8 and r9 so this kentry hook restores them before
+	 * entering the decompressed kernel.
+	 */
+	platform_ops.kentry = opal_kentry;
 	return 0;
 }
 

arch/powerpc/boot/ops.h

@@ -30,6 +30,7 @@ struct platform_ops {
 	void *	(*realloc)(void *ptr, unsigned long size);
 	void	(*exit)(void);
 	void *	(*vmlinux_alloc)(unsigned long size);
+	void  	(*kentry)(unsigned long fdt_addr, void *vmlinux_addr);
 };
 extern struct platform_ops platform_ops;
 

arch/powerpc/include/asm/asm-prototypes.h

@@ -14,6 +14,10 @@
 
 #include <linux/threads.h>
 #include <linux/kprobes.h>
+#include <asm/cacheflush.h>
+#include <asm/checksum.h>
+#include <asm/uaccess.h>
+#include <asm/epapr_hcalls.h>
 
 #include <uapi/asm/ucontext.h>
 
@@ -109,4 +113,12 @@ void early_setup_secondary(void);
 /* time */
 void accumulate_stolen_time(void);
 
+/* misc runtime */
+extern u64 __bswapdi2(u64);
+extern s64 __lshrdi3(s64, int);
+extern s64 __ashldi3(s64, int);
+extern s64 __ashrdi3(s64, int);
+extern int __cmpdi2(s64, s64);
+extern int __ucmpdi2(u64, u64);
+
 #endif /* _ASM_POWERPC_ASM_PROTOTYPES_H */

arch/powerpc/include/asm/exception-64s.h

@@ -91,7 +91,7 @@
  */
 #define LOAD_HANDLER(reg, label)					\
 	ld	reg,PACAKBASE(r13);	/* get high part of &label */	\
-	ori	reg,reg,(FIXED_SYMBOL_ABS_ADDR(label))@l;
+	ori	reg,reg,FIXED_SYMBOL_ABS_ADDR(label);
 
 #define __LOAD_HANDLER(reg, label)					\
 	ld	reg,PACAKBASE(r13);					\
@@ -158,14 +158,17 @@ BEGIN_FTR_SECTION_NESTED(943)						\
 	std	ra,offset(r13);						\
 END_FTR_SECTION_NESTED(ftr,ftr,943)
 
-#define EXCEPTION_PROLOG_0(area)					\
-	GET_PACA(r13);							\
+#define EXCEPTION_PROLOG_0_PACA(area)					\
 	std	r9,area+EX_R9(r13);	/* save r9 */			\
 	OPT_GET_SPR(r9, SPRN_PPR, CPU_FTR_HAS_PPR);			\
 	HMT_MEDIUM;							\
 	std	r10,area+EX_R10(r13);	/* save r10 - r12 */		\
 	OPT_GET_SPR(r10, SPRN_CFAR, CPU_FTR_CFAR)
 
+#define EXCEPTION_PROLOG_0(area)					\
+	GET_PACA(r13);							\
+	EXCEPTION_PROLOG_0_PACA(area)
+
 #define __EXCEPTION_PROLOG_1(area, extra, vec)				\
 	OPT_SAVE_REG_TO_PACA(area+EX_PPR, r9, CPU_FTR_HAS_PPR);		\
 	OPT_SAVE_REG_TO_PACA(area+EX_CFAR, r10, CPU_FTR_CFAR);		\
@@ -196,6 +199,12 @@ END_FTR_SECTION_NESTED(ftr,ftr,943)
 	EXCEPTION_PROLOG_1(area, extra, vec);				\
 	EXCEPTION_PROLOG_PSERIES_1(label, h);
 
+/* Have the PACA in r13 already */
+#define EXCEPTION_PROLOG_PSERIES_PACA(area, label, h, extra, vec)	\
+	EXCEPTION_PROLOG_0_PACA(area);					\
+	EXCEPTION_PROLOG_1(area, extra, vec);				\
+	EXCEPTION_PROLOG_PSERIES_1(label, h);
+
 #define __KVMTEST(h, n)							\
 	lbz	r10,HSTATE_IN_GUEST(r13);				\
 	cmpwi	r10,0;							\

arch/powerpc/include/asm/mmu.h

@@ -28,6 +28,12 @@
  * Individual features below.
  */
 
+/*
+ * Kernel read only support.
+ * We added the ppp value 0b110 in ISA 2.04.
+ */
+#define MMU_FTR_KERNEL_RO		ASM_CONST(0x00004000)
+
 /*
  * We need to clear top 16bits of va (from the remaining 64 bits )in
  * tlbie* instructions
@@ -103,10 +109,10 @@
 #define MMU_FTRS_POWER4		MMU_FTRS_DEFAULT_HPTE_ARCH_V2
 #define MMU_FTRS_PPC970		MMU_FTRS_POWER4 | MMU_FTR_TLBIE_CROP_VA
 #define MMU_FTRS_POWER5		MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE
-#define MMU_FTRS_POWER6		MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE
-#define MMU_FTRS_POWER7		MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE
-#define MMU_FTRS_POWER8		MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE
-#define MMU_FTRS_POWER9		MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE
+#define MMU_FTRS_POWER6		MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE | MMU_FTR_KERNEL_RO
+#define MMU_FTRS_POWER7		MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE | MMU_FTR_KERNEL_RO
+#define MMU_FTRS_POWER8		MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE | MMU_FTR_KERNEL_RO
+#define MMU_FTRS_POWER9		MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE | MMU_FTR_KERNEL_RO
 #define MMU_FTRS_CELL		MMU_FTRS_DEFAULT_HPTE_ARCH_V2 | \
 				MMU_FTR_CI_LARGE_PAGE
 #define MMU_FTRS_PA6T		MMU_FTRS_DEFAULT_HPTE_ARCH_V2 | \

arch/powerpc/include/asm/ppc-opcode.h

@@ -460,5 +460,6 @@
 
 #define PPC_SLBIA(IH)	stringify_in_c(.long PPC_INST_SLBIA | \
 				       ((IH & 0x7) << 21))
+#define PPC_INVALIDATE_ERAT	PPC_SLBIA(7)
 
 #endif /* _ASM_POWERPC_PPC_OPCODE_H */

arch/powerpc/include/asm/reg.h

@@ -355,6 +355,7 @@
 #define     LPCR_PECE0		ASM_CONST(0x0000000000004000)	/* ext. exceptions can cause exit */
 #define     LPCR_PECE1		ASM_CONST(0x0000000000002000)	/* decrementer can cause exit */
 #define     LPCR_PECE2		ASM_CONST(0x0000000000001000)	/* machine check etc can cause exit */
+#define     LPCR_PECE_HVEE	ASM_CONST(0x0000400000000000)	/* P9 Wakeup on HV interrupts */
 #define   LPCR_MER		ASM_CONST(0x0000000000000800)	/* Mediated External Exception */
 #define   LPCR_MER_SH		11
 #define   LPCR_TC		ASM_CONST(0x0000000000000200)	/* Translation control */

arch/powerpc/kernel/cpu_setup_power.S

@@ -98,8 +98,8 @@ _GLOBAL(__setup_cpu_power9)
 	li	r0,0
 	mtspr	SPRN_LPID,r0
 	mfspr	r3,SPRN_LPCR
-	ori	r3, r3, LPCR_PECEDH
-	ori	r3, r3, LPCR_HVICE
+	LOAD_REG_IMMEDIATE(r4, LPCR_PECEDH | LPCR_PECE_HVEE | LPCR_HVICE)
+	or	r3, r3, r4
 	bl	__init_LPCR
 	bl	__init_HFSCR
 	bl	__init_tlb_power9
@@ -118,8 +118,8 @@ _GLOBAL(__restore_cpu_power9)
 	li	r0,0
 	mtspr	SPRN_LPID,r0
 	mfspr   r3,SPRN_LPCR
-	ori	r3, r3, LPCR_PECEDH
-	ori	r3, r3, LPCR_HVICE
+	LOAD_REG_IMMEDIATE(r4, LPCR_PECEDH | LPCR_PECE_HVEE | LPCR_HVICE)
+	or	r3, r3, r4
 	bl	__init_LPCR
 	bl	__init_HFSCR
 	bl	__init_tlb_power9

arch/powerpc/kernel/exceptions-64s.S

@@ -116,7 +116,9 @@ EXC_VIRT_NONE(0x4000, 0x4100)
 
 EXC_REAL_BEGIN(system_reset, 0x100, 0x200)
 	SET_SCRATCH0(r13)
-	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common, EXC_STD,
+	GET_PACA(r13)
+	clrrdi	r13,r13,1 /* Last bit of HSPRG0 is set if waking from winkle */
+	EXCEPTION_PROLOG_PSERIES_PACA(PACA_EXGEN, system_reset_common, EXC_STD,
 				 IDLETEST, 0x100)
 
 EXC_REAL_END(system_reset, 0x100, 0x200)
@@ -124,6 +126,9 @@ EXC_VIRT_NONE(0x4100, 0x4200)
 
 #ifdef CONFIG_PPC_P7_NAP
 EXC_COMMON_BEGIN(system_reset_idle_common)
+BEGIN_FTR_SECTION
+	GET_PACA(r13) /* Restore HSPRG0 to get the winkle bit in r13 */
+END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_300)
 	bl	pnv_restore_hyp_resource
 
 	li	r0,PNV_THREAD_RUNNING
@@ -169,7 +174,7 @@ EXC_REAL_BEGIN(machine_check, 0x200, 0x300)
 	SET_SCRATCH0(r13)		/* save r13 */
 	/*
 	 * Running native on arch 2.06 or later, we may wakeup from winkle
-	 * inside machine check. If yes, then last bit of HSPGR0 would be set
+	 * inside machine check. If yes, then last bit of HSPRG0 would be set
 	 * to 1. Hence clear it unconditionally.
 	 */
 	GET_PACA(r13)
@@ -388,7 +393,7 @@ EXC_COMMON_BEGIN(machine_check_handle_early)
 	/*
 	 * Go back to winkle. Please note that this thread was woken up in
 	 * machine check from winkle and have not restored the per-subcore
-	 * state. Hence before going back to winkle, set last bit of HSPGR0
+	 * state. Hence before going back to winkle, set last bit of HSPRG0
 	 * to 1. This will make sure that if this thread gets woken up
 	 * again at reset vector 0x100 then it will get chance to restore
 	 * the subcore state.

arch/powerpc/kernel/process.c

@@ -1215,7 +1215,7 @@ static void show_instructions(struct pt_regs *regs)
 		int instr;
 
 		if (!(i % 8))
-			printk("\n");
+			pr_cont("\n");
 
 #if !defined(CONFIG_BOOKE)
 		/* If executing with the IMMU off, adjust pc rather
@@ -1227,18 +1227,18 @@ static void show_instructions(struct pt_regs *regs)
 
 		if (!__kernel_text_address(pc) ||
 		     probe_kernel_address((unsigned int __user *)pc, instr)) {
-			printk(KERN_CONT "XXXXXXXX ");
+			pr_cont("XXXXXXXX ");
 		} else {
 			if (regs->nip == pc)
-				printk(KERN_CONT "<%08x> ", instr);
+				pr_cont("<%08x> ", instr);
 			else
-				printk(KERN_CONT "%08x ", instr);
+				pr_cont("%08x ", instr);
 		}
 
 		pc += sizeof(int);
 	}
 
-	printk("\n");
+	pr_cont("\n");
 }
 
 struct regbit {
@@ -1282,7 +1282,7 @@ static void print_bits(unsigned long val, struct regbit *bits, const char *sep)
 
 	for (; bits->bit; ++bits)
 		if (val & bits->bit) {
-			printk("%s%s", s, bits->name);
+			pr_cont("%s%s", s, bits->name);
 			s = sep;
 		}
 }
@@ -1305,9 +1305,9 @@ static void print_tm_bits(unsigned long val)
  *   T: Transactional	(bit 34)
  */
 	if (val & (MSR_TM | MSR_TS_S | MSR_TS_T)) {
-		printk(",TM[");
+		pr_cont(",TM[");
 		print_bits(val, msr_tm_bits, "");
-		printk("]");
+		pr_cont("]");
 	}
 }
 #else
@@ -1316,10 +1316,10 @@ static void print_tm_bits(unsigned long val) {}
 
 static void print_msr_bits(unsigned long val)
 {
-	printk("<");
+	pr_cont("<");
 	print_bits(val, msr_bits, ",");
 	print_tm_bits(val);
-	printk(">");
+	pr_cont(">");
 }
 
 #ifdef CONFIG_PPC64
@@ -1347,29 +1347,29 @@ void show_regs(struct pt_regs * regs)
 	printk("  CR: %08lx  XER: %08lx\n", regs->ccr, regs->xer);
 	trap = TRAP(regs);
 	if ((regs->trap != 0xc00) && cpu_has_feature(CPU_FTR_CFAR))
-		printk("CFAR: "REG" ", regs->orig_gpr3);
+		pr_cont("CFAR: "REG" ", regs->orig_gpr3);
 	if (trap == 0x200 || trap == 0x300 || trap == 0x600)
 #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
-		printk("DEAR: "REG" ESR: "REG" ", regs->dar, regs->dsisr);
+		pr_cont("DEAR: "REG" ESR: "REG" ", regs->dar, regs->dsisr);
 #else
-		printk("DAR: "REG" DSISR: %08lx ", regs->dar, regs->dsisr);
+		pr_cont("DAR: "REG" DSISR: %08lx ", regs->dar, regs->dsisr);
 #endif
 #ifdef CONFIG_PPC64
-	printk("SOFTE: %ld ", regs->softe);
+	pr_cont("SOFTE: %ld ", regs->softe);
 #endif
 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
 	if (MSR_TM_ACTIVE(regs->msr))
-		printk("\nPACATMSCRATCH: %016llx ", get_paca()->tm_scratch);
+		pr_cont("\nPACATMSCRATCH: %016llx ", get_paca()->tm_scratch);
 #endif
 
 	for (i = 0;  i < 32;  i++) {
 		if ((i % REGS_PER_LINE) == 0)
-			printk("\nGPR%02d: ", i);
-		printk(REG " ", regs->gpr[i]);
+			pr_cont("\nGPR%02d: ", i);
+		pr_cont(REG " ", regs->gpr[i]);
 		if (i == LAST_VOLATILE && !FULL_REGS(regs))
 			break;
 	}
-	printk("\n");
+	pr_cont("\n");
 #ifdef CONFIG_KALLSYMS
 	/*
 	 * Lookup NIP late so we have the best change of getting the
@@ -1900,14 +1900,14 @@ void show_stack(struct task_struct *tsk, unsigned long *stack)
 			printk("["REG"] ["REG"] %pS", sp, ip, (void *)ip);
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 			if ((ip == rth) && curr_frame >= 0) {
-				printk(" (%pS)",
+				pr_cont(" (%pS)",
 				       (void *)current->ret_stack[curr_frame].ret);
 				curr_frame--;
 			}
 #endif
 			if (firstframe)
-				printk(" (unreliable)");
-			printk("\n");
+				pr_cont(" (unreliable)");
+			pr_cont("\n");
 		}
 		firstframe = 0;
 

arch/powerpc/kernel/setup_64.c

@@ -226,17 +226,25 @@ static void __init configure_exceptions(void)
 		if (firmware_has_feature(FW_FEATURE_OPAL))
 			opal_configure_cores();
 
-		/* Enable AIL if supported, and we are in hypervisor mode */
-		if (early_cpu_has_feature(CPU_FTR_HVMODE) &&
-		    early_cpu_has_feature(CPU_FTR_ARCH_207S)) {
-			unsigned long lpcr = mfspr(SPRN_LPCR);
-			mtspr(SPRN_LPCR, lpcr | LPCR_AIL_3);
-		}
+		/* AIL on native is done in cpu_ready_for_interrupts() */
 	}
 }
 
 static void cpu_ready_for_interrupts(void)
 {
+	/*
+	 * Enable AIL if supported, and we are in hypervisor mode. This
+	 * is called once for every processor.
+	 *
+	 * If we are not in hypervisor mode the job is done once for
+	 * the whole partition in configure_exceptions().
+	 */
+	if (early_cpu_has_feature(CPU_FTR_HVMODE) &&
+	    early_cpu_has_feature(CPU_FTR_ARCH_207S)) {
+		unsigned long lpcr = mfspr(SPRN_LPCR);
+		mtspr(SPRN_LPCR, lpcr | LPCR_AIL_3);
+	}
+
 	/* Set IR and DR in PACA MSR */
 	get_paca()->kernel_msr = MSR_KERNEL;
 }

arch/powerpc/mm/hash_utils_64.c

@@ -193,8 +193,12 @@ unsigned long htab_convert_pte_flags(unsigned long pteflags)
 		/*
 		 * Kernel read only mapped with ppp bits 0b110
 		 */
-		if (!(pteflags & _PAGE_WRITE))
-			rflags |= (HPTE_R_PP0 | 0x2);
+		if (!(pteflags & _PAGE_WRITE)) {
+			if (mmu_has_feature(MMU_FTR_KERNEL_RO))
+				rflags |= (HPTE_R_PP0 | 0x2);
+			else
+				rflags |= 0x3;
+		}
 	} else {
 		if (pteflags & _PAGE_RWX)
 			rflags |= 0x2;
@@ -1029,6 +1033,10 @@ void hash__early_init_mmu_secondary(void)
 {
 	/* Initialize hash table for that CPU */
 	if (!firmware_has_feature(FW_FEATURE_LPAR)) {
+
+		if (cpu_has_feature(CPU_FTR_POWER9_DD1))
+			update_hid_for_hash();
+
 		if (!cpu_has_feature(CPU_FTR_ARCH_300))
 			mtspr(SPRN_SDR1, _SDR1);
 		else