[media] e4000: fix PLL calc to allow higher frequencies

There was 32-bit overflow on VCO frequency calculation which blocks
tuning to 1073 - 1104 MHz. Use 64 bit number in order to avoid VCO
frequency overflow.

After that fix device in question tunes to following range:
60 - 1104 MHz
1250 - 2207 MHz

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

drivers/media/tuners/e4000.c

@@ -221,11 +221,11 @@ static int e4000_set_params(struct dvb_frontend *fe)
 	struct e4000_priv *priv = fe->tuner_priv;
 	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
 	int ret, i, sigma_delta;
-	unsigned int f_vco;
+	u64 f_vco;
 	u8 buf[5], i_data[4], q_data[4];
 
 	dev_dbg(&priv->client->dev,
-			"%s: delivery_system=%d frequency=%d bandwidth_hz=%d\n",
+			"%s: delivery_system=%d frequency=%u bandwidth_hz=%u\n",
 			__func__, c->delivery_system, c->frequency,
 			c->bandwidth_hz);
 
@@ -248,20 +248,16 @@ static int e4000_set_params(struct dvb_frontend *fe)
 		goto err;
 	}
 
-	/*
-	 * Note: Currently f_vco overflows when c->frequency is 1 073 741 824 Hz
-	 * or more.
-	 */
-	f_vco = c->frequency * e4000_pll_lut[i].mul;
+	f_vco = 1ull * c->frequency * e4000_pll_lut[i].mul;
 	sigma_delta = div_u64(0x10000ULL * (f_vco % priv->clock), priv->clock);
-	buf[0] = f_vco / priv->clock;
+	buf[0] = div_u64(f_vco, priv->clock);
 	buf[1] = (sigma_delta >> 0) & 0xff;
 	buf[2] = (sigma_delta >> 8) & 0xff;
 	buf[3] = 0x00;
 	buf[4] = e4000_pll_lut[i].div;
 
 	dev_dbg(&priv->client->dev,
-			"%s: f_vco=%u pll div=%d sigma_delta=%04x\n",
+			"%s: f_vco=%llu pll div=%d sigma_delta=%04x\n",
 			__func__, f_vco, buf[0], sigma_delta);
 
 	ret = e4000_wr_regs(priv, 0x09, buf, 5);