Merge branch 'topic/omap' into for-linus

Documentation/devicetree/bindings/dma/dma.txt

@@ -31,6 +31,34 @@ Example:
 		dma-requests = <127>;
 	};
 
+* DMA router
+
+DMA routers are transparent IP blocks used to route DMA request lines from
+devices to the DMA controller. Some SoCs (like TI DRA7x) have more peripherals
+integrated with DMA requests than what the DMA controller can handle directly.
+
+Required property:
+- dma-masters:		phandle of the DMA controller or list of phandles for
+			the DMA controllers the router can direct the signal to.
+- #dma-cells: 		Must be at least 1. Used to provide DMA router specific
+			information. See DMA client binding below for more
+			details.
+
+Optional properties:
+- dma-requests: 	Number of incoming request lines the router can handle.
+- In the node pointed by the dma-masters:
+	- dma-requests:	The router driver might need to look for this in order
+			to configure the routing.
+
+Example:
+	sdma_xbar: dma-router@4a002b78 {
+		compatible = "ti,dra7-dma-crossbar";
+		reg = <0x4a002b78 0xfc>;
+		#dma-cells = <1>;
+		dma-requests = <205>;
+		ti,dma-safe-map = <0>;
+		dma-masters = <&sdma>;
+	};
 
 * DMA client
 

Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt

@@ -0,0 +1,52 @@
+Texas Instruments DMA Crossbar (DMA request router)
+
+Required properties:
+- compatible:	"ti,dra7-dma-crossbar" for DRA7xx DMA crossbar
+- reg:		Memory map for accessing module
+- #dma-cells:	Should be set to <1>.
+		Clients should use the crossbar request number (input)
+- dma-requests:	Number of DMA requests the crossbar can receive
+- dma-masters:	phandle pointing to the DMA controller
+
+The DMA controller node need to have the following poroperties:
+- dma-requests:	Number of DMA requests the controller can handle
+
+Optional properties:
+- ti,dma-safe-map: Safe routing value for unused request lines
+
+Example:
+
+/* DMA controller */
+sdma: dma-controller@4a056000 {
+	compatible = "ti,omap4430-sdma";
+	reg = <0x4a056000 0x1000>;
+	interrupts =	<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+	#dma-cells = <1>;
+	dma-channels = <32>;
+	dma-requests = <127>;
+};
+
+/* DMA crossbar */
+sdma_xbar: dma-router@4a002b78 {
+	compatible = "ti,dra7-dma-crossbar";
+	reg = <0x4a002b78 0xfc>;
+	#dma-cells = <1>;
+	dma-requests = <205>;
+	ti,dma-safe-map = <0>;
+	dma-masters = <&sdma>;
+};
+
+/* DMA client */
+uart1: serial@4806a000 {
+	compatible = "ti,omap4-uart";
+	reg = <0x4806a000 0x100>;
+	interrupts-extended = <&gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+	ti,hwmods = "uart1";
+	clock-frequency = <48000000>;
+	status = "disabled";
+	dmas = <&sdma_xbar 49>, <&sdma_xbar 50>;
+	dma-names = "tx", "rx";
+};

drivers/dma/Kconfig

@@ -245,6 +245,9 @@ config TI_EDMA
 	  Enable support for the TI EDMA controller. This DMA
 	  engine is found on TI DaVinci and AM33xx parts.
 
+config TI_DMA_CROSSBAR
+	bool
+
 config ARCH_HAS_ASYNC_TX_FIND_CHANNEL
 	bool
 
@@ -330,6 +333,7 @@ config DMA_OMAP
 	depends on ARCH_OMAP
 	select DMA_ENGINE
 	select DMA_VIRTUAL_CHANNELS
+	select TI_DMA_CROSSBAR if SOC_DRA7XX
 
 config DMA_BCM2835
 	tristate "BCM2835 DMA engine support"

drivers/dma/Makefile

@@ -38,6 +38,7 @@ obj-$(CONFIG_EP93XX_DMA) += ep93xx_dma.o
 obj-$(CONFIG_DMA_SA11X0) += sa11x0-dma.o
 obj-$(CONFIG_MMP_TDMA) += mmp_tdma.o
 obj-$(CONFIG_DMA_OMAP) += omap-dma.o
+obj-$(CONFIG_TI_DMA_CROSSBAR) += ti-dma-crossbar.o
 obj-$(CONFIG_DMA_BCM2835) += bcm2835-dma.o
 obj-$(CONFIG_MMP_PDMA) += mmp_pdma.o
 obj-$(CONFIG_DMA_JZ4740) += dma-jz4740.o

drivers/dma/dmaengine.c

@@ -267,6 +267,13 @@ static void dma_chan_put(struct dma_chan *chan)
 	/* This channel is not in use anymore, free it */
 	if (!chan->client_count && chan->device->device_free_chan_resources)
 		chan->device->device_free_chan_resources(chan);
+
+	/* If the channel is used via a DMA request router, free the mapping */
+	if (chan->router && chan->router->route_free) {
+		chan->router->route_free(chan->router->dev, chan->route_data);
+		chan->router = NULL;
+		chan->route_data = NULL;
+	}
 }
 
 enum dma_status dma_sync_wait(struct dma_chan *chan, dma_cookie_t cookie)

drivers/dma/of-dma.c

@@ -44,6 +44,50 @@ static struct of_dma *of_dma_find_controller(struct of_phandle_args *dma_spec)
 	return NULL;
 }
 
+/**
+ * of_dma_router_xlate - translation function for router devices
+ * @dma_spec:	pointer to DMA specifier as found in the device tree
+ * @of_dma:	pointer to DMA controller data (router information)
+ *
+ * The function creates new dma_spec to be passed to the router driver's
+ * of_dma_route_allocate() function to prepare a dma_spec which will be used
+ * to request channel from the real DMA controller.
+ */
+static struct dma_chan *of_dma_router_xlate(struct of_phandle_args *dma_spec,
+					    struct of_dma *ofdma)
+{
+	struct dma_chan		*chan;
+	struct of_dma		*ofdma_target;
+	struct of_phandle_args	dma_spec_target;
+	void			*route_data;
+
+	/* translate the request for the real DMA controller */
+	memcpy(&dma_spec_target, dma_spec, sizeof(dma_spec_target));
+	route_data = ofdma->of_dma_route_allocate(&dma_spec_target, ofdma);
+	if (IS_ERR(route_data))
+		return NULL;
+
+	ofdma_target = of_dma_find_controller(&dma_spec_target);
+	if (!ofdma_target)
+		return NULL;
+
+	chan = ofdma_target->of_dma_xlate(&dma_spec_target, ofdma_target);
+	if (chan) {
+		chan->router = ofdma->dma_router;
+		chan->route_data = route_data;
+	} else {
+		ofdma->dma_router->route_free(ofdma->dma_router->dev,
+					      route_data);
+	}
+
+	/*
+	 * Need to put the node back since the ofdma->of_dma_route_allocate
+	 * has taken it for generating the new, translated dma_spec
+	 */
+	of_node_put(dma_spec_target.np);
+	return chan;
+}
+
 /**
  * of_dma_controller_register - Register a DMA controller to DT DMA helpers
  * @np:			device node of DMA controller
@@ -109,6 +153,51 @@ void of_dma_controller_free(struct device_node *np)
 }
 EXPORT_SYMBOL_GPL(of_dma_controller_free);
 
+/**
+ * of_dma_router_register - Register a DMA router to DT DMA helpers as a
+ *			    controller
+ * @np:				device node of DMA router
+ * @of_dma_route_allocate:	setup function for the router which need to
+ *				modify the dma_spec for the DMA controller to
+ *				use and to set up the requested route.
+ * @dma_router:			pointer to dma_router structure to be used when
+ *				the route need to be free up.
+ *
+ * Returns 0 on success or appropriate errno value on error.
+ *
+ * Allocated memory should be freed with appropriate of_dma_controller_free()
+ * call.
+ */
+int of_dma_router_register(struct device_node *np,
+			   void *(*of_dma_route_allocate)
+			   (struct of_phandle_args *, struct of_dma *),
+			   struct dma_router *dma_router)
+{
+	struct of_dma	*ofdma;
+
+	if (!np || !of_dma_route_allocate || !dma_router) {
+		pr_err("%s: not enough information provided\n", __func__);
+		return -EINVAL;
+	}
+
+	ofdma = kzalloc(sizeof(*ofdma), GFP_KERNEL);
+	if (!ofdma)
+		return -ENOMEM;
+
+	ofdma->of_node = np;
+	ofdma->of_dma_xlate = of_dma_router_xlate;
+	ofdma->of_dma_route_allocate = of_dma_route_allocate;
+	ofdma->dma_router = dma_router;
+
+	/* Now queue of_dma controller structure in list */
+	mutex_lock(&of_dma_lock);
+	list_add_tail(&ofdma->of_dma_controllers, &of_dma_list);
+	mutex_unlock(&of_dma_lock);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(of_dma_router_register);
+
 /**
  * of_dma_match_channel - Check if a DMA specifier matches name
  * @np:		device node to look for DMA channels

drivers/dma/omap-dma.c

@@ -22,6 +22,9 @@
 
 #include "virt-dma.h"
 
+#define OMAP_SDMA_REQUESTS	127
+#define OMAP_SDMA_CHANNELS	32
+
 struct omap_dmadev {
 	struct dma_device ddev;
 	spinlock_t lock;
@@ -31,9 +34,10 @@ struct omap_dmadev {
 	const struct omap_dma_reg *reg_map;
 	struct omap_system_dma_plat_info *plat;
 	bool legacy;
+	unsigned dma_requests;
 	spinlock_t irq_lock;
 	uint32_t irq_enable_mask;
-	struct omap_chan *lch_map[32];
+	struct omap_chan *lch_map[OMAP_SDMA_CHANNELS];
 };
 
 struct omap_chan {
@@ -589,6 +593,7 @@ static void omap_dma_free_chan_resources(struct dma_chan *chan)
 	omap_free_dma(c->dma_ch);
 
 	dev_dbg(od->ddev.dev, "freeing channel for %u\n", c->dma_sig);
+	c->dma_sig = 0;
 }
 
 static size_t omap_dma_sg_size(struct omap_sg *sg)
@@ -1082,7 +1087,7 @@ static int omap_dma_resume(struct dma_chan *chan)
 	return 0;
 }
 
-static int omap_dma_chan_init(struct omap_dmadev *od, int dma_sig)
+static int omap_dma_chan_init(struct omap_dmadev *od)
 {
 	struct omap_chan *c;
 
@@ -1091,7 +1096,6 @@ static int omap_dma_chan_init(struct omap_dmadev *od, int dma_sig)
 		return -ENOMEM;
 
 	c->reg_map = od->reg_map;
-	c->dma_sig = dma_sig;
 	c->vc.desc_free = omap_dma_desc_free;
 	vchan_init(&c->vc, &od->ddev);
 	INIT_LIST_HEAD(&c->node);
@@ -1163,8 +1167,17 @@ static int omap_dma_probe(struct platform_device *pdev)
 
 	tasklet_init(&od->task, omap_dma_sched, (unsigned long)od);
 
-	for (i = 0; i < 127; i++) {
-		rc = omap_dma_chan_init(od, i);
+	od->dma_requests = OMAP_SDMA_REQUESTS;
+	if (pdev->dev.of_node && of_property_read_u32(pdev->dev.of_node,
+						      "dma-requests",
+						      &od->dma_requests)) {
+		dev_info(&pdev->dev,
+			 "Missing dma-requests property, using %u.\n",
+			 OMAP_SDMA_REQUESTS);
+	}
+
+	for (i = 0; i < OMAP_SDMA_CHANNELS; i++) {
+		rc = omap_dma_chan_init(od);
 		if (rc) {
 			omap_dma_free(od);
 			return rc;
@@ -1255,10 +1268,14 @@ static struct platform_driver omap_dma_driver = {
 bool omap_dma_filter_fn(struct dma_chan *chan, void *param)
 {
 	if (chan->device->dev->driver == &omap_dma_driver.driver) {
+		struct omap_dmadev *od = to_omap_dma_dev(chan->device);
 		struct omap_chan *c = to_omap_dma_chan(chan);
 		unsigned req = *(unsigned *)param;
 
-		return req == c->dma_sig;
+		if (req <= od->dma_requests) {
+			c->dma_sig = req;
+			return true;
+		}
 	}
 	return false;
 }

drivers/dma/ti-dma-crossbar.c

@@ -0,0 +1,188 @@
+/*
+ *  Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com
+ *  Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/idr.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_dma.h>
+
+#define TI_XBAR_OUTPUTS	127
+#define TI_XBAR_INPUTS	256
+
+static DEFINE_IDR(map_idr);
+
+struct ti_dma_xbar_data {
+	void __iomem *iomem;
+
+	struct dma_router dmarouter;
+
+	u16 safe_val; /* Value to rest the crossbar lines */
+	u32 xbar_requests; /* number of DMA requests connected to XBAR */
+	u32 dma_requests; /* number of DMA requests forwarded to DMA */
+};
+
+struct ti_dma_xbar_map {
+	u16 xbar_in;
+	int xbar_out;
+};
+
+static inline void ti_dma_xbar_write(void __iomem *iomem, int xbar, u16 val)
+{
+	writew_relaxed(val, iomem + (xbar * 2));
+}
+
+static void ti_dma_xbar_free(struct device *dev, void *route_data)
+{
+	struct ti_dma_xbar_data *xbar = dev_get_drvdata(dev);
+	struct ti_dma_xbar_map *map = route_data;
+
+	dev_dbg(dev, "Unmapping XBAR%u (was routed to %d)\n",
+		map->xbar_in, map->xbar_out);
+
+	ti_dma_xbar_write(xbar->iomem, map->xbar_out, xbar->safe_val);
+	idr_remove(&map_idr, map->xbar_out);
+	kfree(map);
+}
+
+static void *ti_dma_xbar_route_allocate(struct of_phandle_args *dma_spec,
+					struct of_dma *ofdma)
+{
+	struct platform_device *pdev = of_find_device_by_node(ofdma->of_node);
+	struct ti_dma_xbar_data *xbar = platform_get_drvdata(pdev);
+	struct ti_dma_xbar_map *map;
+
+	if (dma_spec->args[0] >= xbar->xbar_requests) {
+		dev_err(&pdev->dev, "Invalid XBAR request number: %d\n",
+			dma_spec->args[0]);
+		return ERR_PTR(-EINVAL);
+	}
+
+	/* The of_node_put() will be done in the core for the node */
+	dma_spec->np = of_parse_phandle(ofdma->of_node, "dma-masters", 0);
+	if (!dma_spec->np) {
+		dev_err(&pdev->dev, "Can't get DMA master\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	map = kzalloc(sizeof(*map), GFP_KERNEL);
+	if (!map) {
+		of_node_put(dma_spec->np);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	map->xbar_out = idr_alloc(&map_idr, NULL, 0, xbar->dma_requests,
+				  GFP_KERNEL);
+	map->xbar_in = (u16)dma_spec->args[0];
+
+	/* The DMA request is 1 based in sDMA */
+	dma_spec->args[0] = map->xbar_out + 1;
+
+	dev_dbg(&pdev->dev, "Mapping XBAR%u to DMA%d\n",
+		map->xbar_in, map->xbar_out);
+
+	ti_dma_xbar_write(xbar->iomem, map->xbar_out, map->xbar_in);
+
+	return map;
+}
+
+static int ti_dma_xbar_probe(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct device_node *dma_node;
+	struct ti_dma_xbar_data *xbar;
+	struct resource *res;
+	u32 safe_val;
+	void __iomem *iomem;
+	int i, ret;
+
+	if (!node)
+		return -ENODEV;
+
+	xbar = devm_kzalloc(&pdev->dev, sizeof(*xbar), GFP_KERNEL);
+	if (!xbar)
+		return -ENOMEM;
+
+	dma_node = of_parse_phandle(node, "dma-masters", 0);
+	if (!dma_node) {
+		dev_err(&pdev->dev, "Can't get DMA master node\n");
+		return -ENODEV;
+	}
+
+	if (of_property_read_u32(dma_node, "dma-requests",
+				 &xbar->dma_requests)) {
+		dev_info(&pdev->dev,
+			 "Missing XBAR output information, using %u.\n",
+			 TI_XBAR_OUTPUTS);
+		xbar->dma_requests = TI_XBAR_OUTPUTS;
+	}
+	of_node_put(dma_node);
+
+	if (of_property_read_u32(node, "dma-requests", &xbar->xbar_requests)) {
+		dev_info(&pdev->dev,
+			 "Missing XBAR input information, using %u.\n",
+			 TI_XBAR_INPUTS);
+		xbar->xbar_requests = TI_XBAR_INPUTS;
+	}
+
+	if (!of_property_read_u32(node, "ti,dma-safe-map", &safe_val))
+		xbar->safe_val = (u16)safe_val;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	iomem = devm_ioremap_resource(&pdev->dev, res);
+	if (!iomem)
+		return -ENOMEM;
+
+	xbar->iomem = iomem;
+
+	xbar->dmarouter.dev = &pdev->dev;
+	xbar->dmarouter.route_free = ti_dma_xbar_free;
+
+	platform_set_drvdata(pdev, xbar);
+
+	/* Reset the crossbar */
+	for (i = 0; i < xbar->dma_requests; i++)
+		ti_dma_xbar_write(xbar->iomem, i, xbar->safe_val);
+
+	ret = of_dma_router_register(node, ti_dma_xbar_route_allocate,
+				     &xbar->dmarouter);
+	if (ret) {
+		/* Restore the defaults for the crossbar */
+		for (i = 0; i < xbar->dma_requests; i++)
+			ti_dma_xbar_write(xbar->iomem, i, i);
+	}
+
+	return ret;
+}
+
+static const struct of_device_id ti_dma_xbar_match[] = {
+	{ .compatible = "ti,dra7-dma-crossbar" },
+	{},
+};
+
+static struct platform_driver ti_dma_xbar_driver = {
+	.driver = {
+		.name = "ti-dma-crossbar",
+		.of_match_table = of_match_ptr(ti_dma_xbar_match),
+	},
+	.probe	= ti_dma_xbar_probe,
+};
+
+int omap_dmaxbar_init(void)
+{
+	return platform_driver_register(&ti_dma_xbar_driver);
+}
+arch_initcall(omap_dmaxbar_init);

include/linux/dmaengine.h

@@ -230,6 +230,16 @@ struct dma_chan_percpu {
 	unsigned long bytes_transferred;
 };
 
+/**
+ * struct dma_router - DMA router structure
+ * @dev: pointer to the DMA router device
+ * @route_free: function to be called when the route can be disconnected
+ */
+struct dma_router {
+	struct device *dev;
+	void (*route_free)(struct device *dev, void *route_data);
+};
+
 /**
  * struct dma_chan - devices supply DMA channels, clients use them
  * @device: ptr to the dma device who supplies this channel, always !%NULL
@@ -241,6 +251,8 @@ struct dma_chan_percpu {
  * @local: per-cpu pointer to a struct dma_chan_percpu
  * @client_count: how many clients are using this channel
  * @table_count: number of appearances in the mem-to-mem allocation table
+ * @router: pointer to the DMA router structure
+ * @route_data: channel specific data for the router
  * @private: private data for certain client-channel associations
  */
 struct dma_chan {
@@ -256,6 +268,11 @@ struct dma_chan {
 	struct dma_chan_percpu __percpu *local;
 	int client_count;
 	int table_count;
+
+	/* DMA router */
+	struct dma_router *router;
+	void *route_data;
+
 	void *private;
 };
 

include/linux/of_dma.h

@@ -23,6 +23,9 @@ struct of_dma {
 	struct device_node	*of_node;
 	struct dma_chan		*(*of_dma_xlate)
 				(struct of_phandle_args *, struct of_dma *);
+	void			*(*of_dma_route_allocate)
+				(struct of_phandle_args *, struct of_dma *);
+	struct dma_router	*dma_router;
 	void			*of_dma_data;
 };
 
@@ -37,12 +40,20 @@ extern int of_dma_controller_register(struct device_node *np,
 		(struct of_phandle_args *, struct of_dma *),
 		void *data);
 extern void of_dma_controller_free(struct device_node *np);
+
+extern int of_dma_router_register(struct device_node *np,
+		void *(*of_dma_route_allocate)
+		(struct of_phandle_args *, struct of_dma *),
+		struct dma_router *dma_router);
+#define of_dma_router_free of_dma_controller_free
+
 extern struct dma_chan *of_dma_request_slave_channel(struct device_node *np,
 						     const char *name);
 extern struct dma_chan *of_dma_simple_xlate(struct of_phandle_args *dma_spec,
 		struct of_dma *ofdma);
 extern struct dma_chan *of_dma_xlate_by_chan_id(struct of_phandle_args *dma_spec,
 		struct of_dma *ofdma);
+
 #else
 static inline int of_dma_controller_register(struct device_node *np,
 		struct dma_chan *(*of_dma_xlate)
@@ -56,6 +67,16 @@ static inline void of_dma_controller_free(struct device_node *np)
 {
 }
 
+static inline int of_dma_router_register(struct device_node *np,
+		void *(*of_dma_route_allocate)
+		(struct of_phandle_args *, struct of_dma *),
+		struct dma_router *dma_router)
+{
+	return -ENODEV;
+}
+
+#define of_dma_router_free of_dma_controller_free
+
 static inline struct dma_chan *of_dma_request_slave_channel(struct device_node *np,
 						     const char *name)
 {