Merge tag 'amlogic-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into clk-next

Same great taste as the previous pull request, but now with 50% less DT
bikeshedding!

Amlogic clock driver updates for v4.12
- meson8: add some new PLLs
- new clocks for Mali
- misc fixes.

Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt

@@ -5,7 +5,8 @@ controllers within the SoC.
 
 Required Properties:
 
-- compatible: should be "amlogic,gxbb-clkc"
+- compatible: should be "amlogic,gxbb-clkc" for GXBB SoC,
+	      or "amlogic,gxl-clkc" for GXL and GXM SoC.
 - reg: physical base address of the clock controller and length of memory
        mapped region.
 

drivers/clk/meson/clk-mpll.c

@@ -64,16 +64,50 @@
 #include <linux/clk-provider.h>
 #include "clkc.h"
 
-#define SDM_MAX 16384
+#define SDM_DEN 16384
+#define SDM_MIN 1
+#define SDM_MAX 16383
+#define N2_MIN	4
+#define N2_MAX	511
 
 #define to_meson_clk_mpll(_hw) container_of(_hw, struct meson_clk_mpll, hw)
 
+static unsigned long rate_from_params(unsigned long parent_rate,
+				      unsigned long sdm,
+				      unsigned long n2)
+{
+	return (parent_rate * SDM_DEN) / ((SDM_DEN * n2) + sdm);
+}
+
+static void params_from_rate(unsigned long requested_rate,
+			     unsigned long parent_rate,
+			     unsigned long *sdm,
+			     unsigned long *n2)
+{
+	uint64_t div = parent_rate;
+	unsigned long rem = do_div(div, requested_rate);
+
+	if (div < N2_MIN) {
+		*n2 = N2_MIN;
+		*sdm = SDM_MIN;
+	} else if (div > N2_MAX) {
+		*n2 = N2_MAX;
+		*sdm = SDM_MAX;
+	} else {
+		*n2 = div;
+		*sdm = DIV_ROUND_UP(rem * SDM_DEN, requested_rate);
+		if (*sdm < SDM_MIN)
+			*sdm = SDM_MIN;
+		else if (*sdm > SDM_MAX)
+			*sdm = SDM_MAX;
+	}
+}
+
 static unsigned long mpll_recalc_rate(struct clk_hw *hw,
 		unsigned long parent_rate)
 {
 	struct meson_clk_mpll *mpll = to_meson_clk_mpll(hw);
 	struct parm *p;
-	unsigned long rate = 0;
 	unsigned long reg, sdm, n2;
 
 	p = &mpll->sdm;
@@ -84,11 +118,119 @@ static unsigned long mpll_recalc_rate(struct clk_hw *hw,
 	reg = readl(mpll->base + p->reg_off);
 	n2 = PARM_GET(p->width, p->shift, reg);
 
-	rate = (parent_rate * SDM_MAX) / ((SDM_MAX * n2) + sdm);
+	return rate_from_params(parent_rate, sdm, n2);
+}
+
+static long mpll_round_rate(struct clk_hw *hw,
+			    unsigned long rate,
+			    unsigned long *parent_rate)
+{
+	unsigned long sdm, n2;
+
+	params_from_rate(rate, *parent_rate, &sdm, &n2);
+	return rate_from_params(*parent_rate, sdm, n2);
+}
+
+static int mpll_set_rate(struct clk_hw *hw,
+			 unsigned long rate,
+			 unsigned long parent_rate)
+{
+	struct meson_clk_mpll *mpll = to_meson_clk_mpll(hw);
+	struct parm *p;
+	unsigned long reg, sdm, n2;
+	unsigned long flags = 0;
+
+	params_from_rate(rate, parent_rate, &sdm, &n2);
+
+	if (mpll->lock)
+		spin_lock_irqsave(mpll->lock, flags);
+	else
+		__acquire(mpll->lock);
+
+	p = &mpll->sdm;
+	reg = readl(mpll->base + p->reg_off);
+	reg = PARM_SET(p->width, p->shift, reg, sdm);
+	writel(reg, mpll->base + p->reg_off);
+
+	p = &mpll->sdm_en;
+	reg = readl(mpll->base + p->reg_off);
+	reg = PARM_SET(p->width, p->shift, reg, 1);
+	writel(reg, mpll->base + p->reg_off);
+
+	p = &mpll->n2;
+	reg = readl(mpll->base + p->reg_off);
+	reg = PARM_SET(p->width, p->shift, reg, n2);
+	writel(reg, mpll->base + p->reg_off);
+
+	if (mpll->lock)
+		spin_unlock_irqrestore(mpll->lock, flags);
+	else
+		__release(mpll->lock);
 
-	return rate;
+	return 0;
+}
+
+static void mpll_enable_core(struct clk_hw *hw, int enable)
+{
+	struct meson_clk_mpll *mpll = to_meson_clk_mpll(hw);
+	struct parm *p;
+	unsigned long reg;
+	unsigned long flags = 0;
+
+	if (mpll->lock)
+		spin_lock_irqsave(mpll->lock, flags);
+	else
+		__acquire(mpll->lock);
+
+	p = &mpll->en;
+	reg = readl(mpll->base + p->reg_off);
+	reg = PARM_SET(p->width, p->shift, reg, enable ? 1 : 0);
+	writel(reg, mpll->base + p->reg_off);
+
+	if (mpll->lock)
+		spin_unlock_irqrestore(mpll->lock, flags);
+	else
+		__release(mpll->lock);
+}
+
+
+static int mpll_enable(struct clk_hw *hw)
+{
+	mpll_enable_core(hw, 1);
+
+	return 0;
+}
+
+static void mpll_disable(struct clk_hw *hw)
+{
+	mpll_enable_core(hw, 0);
+}
+
+static int mpll_is_enabled(struct clk_hw *hw)
+{
+	struct meson_clk_mpll *mpll = to_meson_clk_mpll(hw);
+	struct parm *p;
+	unsigned long reg;
+	int en;
+
+	p = &mpll->en;
+	reg = readl(mpll->base + p->reg_off);
+	en = PARM_GET(p->width, p->shift, reg);
+
+	return en;
 }
 
 const struct clk_ops meson_clk_mpll_ro_ops = {
-	.recalc_rate = mpll_recalc_rate,
+	.recalc_rate	= mpll_recalc_rate,
+	.round_rate	= mpll_round_rate,
+	.is_enabled	= mpll_is_enabled,
+};
+
+const struct clk_ops meson_clk_mpll_ops = {
+	.recalc_rate	= mpll_recalc_rate,
+	.round_rate	= mpll_round_rate,
+	.set_rate	= mpll_set_rate,
+	.enable		= mpll_enable,
+	.disable	= mpll_disable,
+	.is_enabled	= mpll_is_enabled,
 };

drivers/clk/meson/clk-pll.c

@@ -116,6 +116,30 @@ static const struct pll_rate_table *meson_clk_get_pll_settings(struct meson_clk_
 	return NULL;
 }
 
+/* Specific wait loop for GXL/GXM GP0 PLL */
+static int meson_clk_pll_wait_lock_reset(struct meson_clk_pll *pll,
+					 struct parm *p_n)
+{
+	int delay = 100;
+	u32 reg;
+
+	while (delay > 0) {
+		reg = readl(pll->base + p_n->reg_off);
+		writel(reg | MESON_PLL_RESET, pll->base + p_n->reg_off);
+		udelay(10);
+		writel(reg & ~MESON_PLL_RESET, pll->base + p_n->reg_off);
+
+		/* This delay comes from AMLogic tree clk-gp0-gxl driver */
+		mdelay(1);
+
+		reg = readl(pll->base + p_n->reg_off);
+		if (reg & MESON_PLL_LOCK)
+			return 0;
+		delay--;
+	}
+	return -ETIMEDOUT;
+}
+
 static int meson_clk_pll_wait_lock(struct meson_clk_pll *pll,
 				   struct parm *p_n)
 {
@@ -132,6 +156,15 @@ static int meson_clk_pll_wait_lock(struct meson_clk_pll *pll,
 	return -ETIMEDOUT;
 }
 
+static void meson_clk_pll_init_params(struct meson_clk_pll *pll)
+{
+	int i;
+
+	for (i = 0 ; i < pll->params.params_count ; ++i)
+		writel(pll->params.params_table[i].value,
+		       pll->base + pll->params.params_table[i].reg_off);
+}
+
 static int meson_clk_pll_set_rate(struct clk_hw *hw, unsigned long rate,
 				  unsigned long parent_rate)
 {
@@ -151,10 +184,16 @@ static int meson_clk_pll_set_rate(struct clk_hw *hw, unsigned long rate,
 	if (!rate_set)
 		return -EINVAL;
 
+	/* Initialize the PLL in a clean state if specified */
+	if (pll->params.params_count)
+		meson_clk_pll_init_params(pll);
+
 	/* PLL reset */
 	p = &pll->n;
 	reg = readl(pll->base + p->reg_off);
-	writel(reg | MESON_PLL_RESET, pll->base + p->reg_off);
+	/* If no_init_reset is provided, avoid resetting at this point */
+	if (!pll->params.no_init_reset)
+		writel(reg | MESON_PLL_RESET, pll->base + p->reg_off);
 
 	reg = PARM_SET(p->width, p->shift, reg, rate_set->n);
 	writel(reg, pll->base + p->reg_off);
@@ -184,7 +223,17 @@ static int meson_clk_pll_set_rate(struct clk_hw *hw, unsigned long rate,
 	}
 
 	p = &pll->n;
-	ret = meson_clk_pll_wait_lock(pll, p);
+	/* If clear_reset_for_lock is provided, remove the reset bit here */
+	if (pll->params.clear_reset_for_lock) {
+		reg = readl(pll->base + p->reg_off);
+		writel(reg & ~MESON_PLL_RESET, pll->base + p->reg_off);
+	}
+
+	/* If reset_lock_loop, use a special loop including resetting */
+	if (pll->params.reset_lock_loop)
+		ret = meson_clk_pll_wait_lock_reset(pll, p);
+	else
+		ret = meson_clk_pll_wait_lock(pll, p);
 	if (ret) {
 		pr_warn("%s: pll did not lock, trying to restore old rate %lu\n",
 			__func__, old_rate);

drivers/clk/meson/clkc.h

@@ -25,7 +25,7 @@
 #define PARM_GET(width, shift, reg)					\
 	(((reg) & SETPMASK(width, shift)) >> (shift))
 #define PARM_SET(width, shift, reg, val)				\
-	(((reg) & CLRPMASK(width, shift)) | (val << (shift)))
+	(((reg) & CLRPMASK(width, shift)) | ((val) << (shift)))
 
 #define MESON_PARM_APPLICABLE(p)		(!!((p)->width))
 
@@ -62,6 +62,28 @@ struct pll_rate_table {
 		.frac		= (_frac),				\
 	}								\
 
+struct pll_params_table {
+	unsigned int reg_off;
+	unsigned int value;
+};
+
+#define PLL_PARAM(_reg, _val)						\
+	{								\
+		.reg_off	= (_reg),				\
+		.value		= (_val),				\
+	}
+
+struct pll_setup_params {
+	struct pll_params_table *params_table;
+	unsigned int params_count;
+	/* Workaround for GP0, do not reset before configuring */
+	bool no_init_reset;
+	/* Workaround for GP0, unreset right before checking for lock */
+	bool clear_reset_for_lock;
+	/* Workaround for GXL GP0, reset in the lock checking loop */
+	bool reset_lock_loop;
+};
+
 struct meson_clk_pll {
 	struct clk_hw hw;
 	void __iomem *base;
@@ -70,6 +92,7 @@ struct meson_clk_pll {
 	struct parm frac;
 	struct parm od;
 	struct parm od2;
+	const struct pll_setup_params params;
 	const struct pll_rate_table *rate_table;
 	unsigned int rate_count;
 	spinlock_t *lock;
@@ -92,8 +115,9 @@ struct meson_clk_mpll {
 	struct clk_hw hw;
 	void __iomem *base;
 	struct parm sdm;
+	struct parm sdm_en;
 	struct parm n2;
-	/* FIXME ssen gate control? */
+	struct parm en;
 	spinlock_t *lock;
 };
 
@@ -116,5 +140,6 @@ extern const struct clk_ops meson_clk_pll_ro_ops;
 extern const struct clk_ops meson_clk_pll_ops;
 extern const struct clk_ops meson_clk_cpu_ops;
 extern const struct clk_ops meson_clk_mpll_ro_ops;
+extern const struct clk_ops meson_clk_mpll_ops;
 
 #endif /* __CLKC_H */

drivers/clk/meson/gxbb.c

@@ -20,6 +20,7 @@
 #include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/of_address.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/init.h>
 
@@ -120,7 +121,7 @@ static const struct pll_rate_table sys_pll_rate_table[] = {
 	{ /* sentinel */ },
 };
 
-static const struct pll_rate_table gp0_pll_rate_table[] = {
+static const struct pll_rate_table gxbb_gp0_pll_rate_table[] = {
 	PLL_RATE(96000000, 32, 1, 3),
 	PLL_RATE(99000000, 33, 1, 3),
 	PLL_RATE(102000000, 34, 1, 3),
@@ -248,6 +249,35 @@ static const struct pll_rate_table gp0_pll_rate_table[] = {
 	{ /* sentinel */ },
 };
 
+static const struct pll_rate_table gxl_gp0_pll_rate_table[] = {
+	PLL_RATE(504000000, 42, 1, 1),
+	PLL_RATE(516000000, 43, 1, 1),
+	PLL_RATE(528000000, 44, 1, 1),
+	PLL_RATE(540000000, 45, 1, 1),
+	PLL_RATE(552000000, 46, 1, 1),
+	PLL_RATE(564000000, 47, 1, 1),
+	PLL_RATE(576000000, 48, 1, 1),
+	PLL_RATE(588000000, 49, 1, 1),
+	PLL_RATE(600000000, 50, 1, 1),
+	PLL_RATE(612000000, 51, 1, 1),
+	PLL_RATE(624000000, 52, 1, 1),
+	PLL_RATE(636000000, 53, 1, 1),
+	PLL_RATE(648000000, 54, 1, 1),
+	PLL_RATE(660000000, 55, 1, 1),
+	PLL_RATE(672000000, 56, 1, 1),
+	PLL_RATE(684000000, 57, 1, 1),
+	PLL_RATE(696000000, 58, 1, 1),
+	PLL_RATE(708000000, 59, 1, 1),
+	PLL_RATE(720000000, 60, 1, 1),
+	PLL_RATE(732000000, 61, 1, 1),
+	PLL_RATE(744000000, 62, 1, 1),
+	PLL_RATE(756000000, 63, 1, 1),
+	PLL_RATE(768000000, 64, 1, 1),
+	PLL_RATE(780000000, 65, 1, 1),
+	PLL_RATE(792000000, 66, 1, 1),
+	{ /* sentinel */ },
+};
+
 static const struct clk_div_table cpu_div_table[] = {
 	{ .val = 1, .div = 1 },
 	{ .val = 2, .div = 2 },
@@ -352,6 +382,13 @@ static struct meson_clk_pll gxbb_sys_pll = {
 	},
 };
 
+struct pll_params_table gxbb_gp0_params_table[] = {
+	PLL_PARAM(HHI_GP0_PLL_CNTL, 0x6a000228),
+	PLL_PARAM(HHI_GP0_PLL_CNTL2, 0x69c80000),
+	PLL_PARAM(HHI_GP0_PLL_CNTL3, 0x0a5590c4),
+	PLL_PARAM(HHI_GP0_PLL_CNTL4, 0x0000500d),
+};
+
 static struct meson_clk_pll gxbb_gp0_pll = {
 	.m = {
 		.reg_off = HHI_GP0_PLL_CNTL,
@@ -368,8 +405,57 @@ static struct meson_clk_pll gxbb_gp0_pll = {
 		.shift   = 16,
 		.width   = 2,
 	},
-	.rate_table = gp0_pll_rate_table,
-	.rate_count = ARRAY_SIZE(gp0_pll_rate_table),
+	.params = {
+		.params_table = gxbb_gp0_params_table,
+		.params_count =	ARRAY_SIZE(gxbb_gp0_params_table),
+		.no_init_reset = true,
+		.clear_reset_for_lock = true,
+	},
+	.rate_table = gxbb_gp0_pll_rate_table,
+	.rate_count = ARRAY_SIZE(gxbb_gp0_pll_rate_table),
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data){
+		.name = "gp0_pll",
+		.ops = &meson_clk_pll_ops,
+		.parent_names = (const char *[]){ "xtal" },
+		.num_parents = 1,
+		.flags = CLK_GET_RATE_NOCACHE,
+	},
+};
+
+struct pll_params_table gxl_gp0_params_table[] = {
+	PLL_PARAM(HHI_GP0_PLL_CNTL, 0x40010250),
+	PLL_PARAM(HHI_GP0_PLL_CNTL1, 0xc084a000),
+	PLL_PARAM(HHI_GP0_PLL_CNTL2, 0xb75020be),
+	PLL_PARAM(HHI_GP0_PLL_CNTL3, 0x0a59a288),
+	PLL_PARAM(HHI_GP0_PLL_CNTL4, 0xc000004d),
+	PLL_PARAM(HHI_GP0_PLL_CNTL5, 0x00078000),
+};
+
+static struct meson_clk_pll gxl_gp0_pll = {
+	.m = {
+		.reg_off = HHI_GP0_PLL_CNTL,
+		.shift   = 0,
+		.width   = 9,
+	},
+	.n = {
+		.reg_off = HHI_GP0_PLL_CNTL,
+		.shift   = 9,
+		.width   = 5,
+	},
+	.od = {
+		.reg_off = HHI_GP0_PLL_CNTL,
+		.shift   = 16,
+		.width   = 2,
+	},
+	.params = {
+		.params_table = gxl_gp0_params_table,
+		.params_count =	ARRAY_SIZE(gxl_gp0_params_table),
+		.no_init_reset = true,
+		.reset_lock_loop = true,
+	},
+	.rate_table = gxl_gp0_pll_rate_table,
+	.rate_count = ARRAY_SIZE(gxl_gp0_pll_rate_table),
 	.lock = &clk_lock,
 	.hw.init = &(struct clk_init_data){
 		.name = "gp0_pll",
@@ -441,15 +527,25 @@ static struct meson_clk_mpll gxbb_mpll0 = {
 		.shift   = 0,
 		.width   = 14,
 	},
+	.sdm_en = {
+		.reg_off = HHI_MPLL_CNTL7,
+		.shift   = 15,
+		.width	 = 1,
+	},
 	.n2 = {
 		.reg_off = HHI_MPLL_CNTL7,
 		.shift   = 16,
 		.width   = 9,
 	},
+	.en = {
+		.reg_off = HHI_MPLL_CNTL7,
+		.shift   = 14,
+		.width	 = 1,
+	},
 	.lock = &clk_lock,
 	.hw.init = &(struct clk_init_data){
 		.name = "mpll0",
-		.ops = &meson_clk_mpll_ro_ops,
+		.ops = &meson_clk_mpll_ops,
 		.parent_names = (const char *[]){ "fixed_pll" },
 		.num_parents = 1,
 	},
@@ -461,15 +557,25 @@ static struct meson_clk_mpll gxbb_mpll1 = {
 		.shift   = 0,
 		.width   = 14,
 	},
+	.sdm_en = {
+		.reg_off = HHI_MPLL_CNTL8,
+		.shift   = 15,
+		.width	 = 1,
+	},
 	.n2 = {
 		.reg_off = HHI_MPLL_CNTL8,
 		.shift   = 16,
 		.width   = 9,
 	},
+	.en = {
+		.reg_off = HHI_MPLL_CNTL8,
+		.shift   = 14,
+		.width	 = 1,
+	},
 	.lock = &clk_lock,
 	.hw.init = &(struct clk_init_data){
 		.name = "mpll1",
-		.ops = &meson_clk_mpll_ro_ops,
+		.ops = &meson_clk_mpll_ops,
 		.parent_names = (const char *[]){ "fixed_pll" },
 		.num_parents = 1,
 	},
@@ -481,15 +587,25 @@ static struct meson_clk_mpll gxbb_mpll2 = {
 		.shift   = 0,
 		.width   = 14,
 	},
+	.sdm_en = {
+		.reg_off = HHI_MPLL_CNTL9,
+		.shift   = 15,
+		.width	 = 1,
+	},
 	.n2 = {
 		.reg_off = HHI_MPLL_CNTL9,
 		.shift   = 16,
 		.width   = 9,
 	},
+	.en = {
+		.reg_off = HHI_MPLL_CNTL9,
+		.shift   = 14,
+		.width	 = 1,
+	},
 	.lock = &clk_lock,
 	.hw.init = &(struct clk_init_data){
 		.name = "mpll2",
-		.ops = &meson_clk_mpll_ro_ops,
+		.ops = &meson_clk_mpll_ops,
 		.parent_names = (const char *[]){ "fixed_pll" },
 		.num_parents = 1,
 	},
@@ -604,6 +720,131 @@ static struct clk_gate gxbb_sar_adc_clk = {
 	},
 };
 
+/*
+ * The MALI IP is clocked by two identical clocks (mali_0 and mali_1)
+ * muxed by a glitch-free switch.
+ */
+
+static u32 mux_table_mali_0_1[] = {0, 1, 2, 3, 4, 5, 6, 7};
+static const char *gxbb_mali_0_1_parent_names[] = {
+	"xtal", "gp0_pll", "mpll2", "mpll1", "fclk_div7",
+	"fclk_div4", "fclk_div3", "fclk_div5"
+};
+
+static struct clk_mux gxbb_mali_0_sel = {
+	.reg = (void *)HHI_MALI_CLK_CNTL,
+	.mask = 0x7,
+	.shift = 9,
+	.table = mux_table_mali_0_1,
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data){
+		.name = "mali_0_sel",
+		.ops = &clk_mux_ops,
+		/*
+		 * bits 10:9 selects from 8 possible parents:
+		 * xtal, gp0_pll, mpll2, mpll1, fclk_div7,
+		 * fclk_div4, fclk_div3, fclk_div5
+		 */
+		.parent_names = gxbb_mali_0_1_parent_names,
+		.num_parents = 8,
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_divider gxbb_mali_0_div = {
+	.reg = (void *)HHI_MALI_CLK_CNTL,
+	.shift = 0,
+	.width = 7,
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data){
+		.name = "mali_0_div",
+		.ops = &clk_divider_ops,
+		.parent_names = (const char *[]){ "mali_0_sel" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_gate gxbb_mali_0 = {
+	.reg = (void *)HHI_MALI_CLK_CNTL,
+	.bit_idx = 8,
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data){
+		.name = "mali_0",
+		.ops = &clk_gate_ops,
+		.parent_names = (const char *[]){ "mali_0_div" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_mux gxbb_mali_1_sel = {
+	.reg = (void *)HHI_MALI_CLK_CNTL,
+	.mask = 0x7,
+	.shift = 25,
+	.table = mux_table_mali_0_1,
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data){
+		.name = "mali_1_sel",
+		.ops = &clk_mux_ops,
+		/*
+		 * bits 10:9 selects from 8 possible parents:
+		 * xtal, gp0_pll, mpll2, mpll1, fclk_div7,
+		 * fclk_div4, fclk_div3, fclk_div5
+		 */
+		.parent_names = gxbb_mali_0_1_parent_names,
+		.num_parents = 8,
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_divider gxbb_mali_1_div = {
+	.reg = (void *)HHI_MALI_CLK_CNTL,
+	.shift = 16,
+	.width = 7,
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data){
+		.name = "mali_1_div",
+		.ops = &clk_divider_ops,
+		.parent_names = (const char *[]){ "mali_1_sel" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_gate gxbb_mali_1 = {
+	.reg = (void *)HHI_MALI_CLK_CNTL,
+	.bit_idx = 24,
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data){
+		.name = "mali_1",
+		.ops = &clk_gate_ops,
+		.parent_names = (const char *[]){ "mali_1_div" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static u32 mux_table_mali[] = {0, 1};
+static const char *gxbb_mali_parent_names[] = {
+	"mali_0", "mali_1"
+};
+
+static struct clk_mux gxbb_mali = {
+	.reg = (void *)HHI_MALI_CLK_CNTL,
+	.mask = 1,
+	.shift = 31,
+	.table = mux_table_mali,
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data){
+		.name = "mali",
+		.ops = &clk_mux_ops,
+		.parent_names = gxbb_mali_parent_names,
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
 /* Everything Else (EE) domain gates */
 static MESON_GATE(gxbb_ddr, HHI_GCLK_MPEG0, 0);
 static MESON_GATE(gxbb_dos, HHI_GCLK_MPEG0, 1);
@@ -797,6 +1038,126 @@ static struct clk_hw_onecell_data gxbb_hw_onecell_data = {
 		[CLKID_SAR_ADC_CLK]	    = &gxbb_sar_adc_clk.hw,
 		[CLKID_SAR_ADC_SEL]	    = &gxbb_sar_adc_clk_sel.hw,
 		[CLKID_SAR_ADC_DIV]	    = &gxbb_sar_adc_clk_div.hw,
+		[CLKID_MALI_0_SEL]	    = &gxbb_mali_0_sel.hw,
+		[CLKID_MALI_0_DIV]	    = &gxbb_mali_0_div.hw,
+		[CLKID_MALI_0]		    = &gxbb_mali_0.hw,
+		[CLKID_MALI_1_SEL]	    = &gxbb_mali_1_sel.hw,
+		[CLKID_MALI_1_DIV]	    = &gxbb_mali_1_div.hw,
+		[CLKID_MALI_1]		    = &gxbb_mali_1.hw,
+		[CLKID_MALI]		    = &gxbb_mali.hw,
+	},
+	.num = NR_CLKS,
+};
+
+static struct clk_hw_onecell_data gxl_hw_onecell_data = {
+	.hws = {
+		[CLKID_SYS_PLL]		    = &gxbb_sys_pll.hw,
+		[CLKID_CPUCLK]		    = &gxbb_cpu_clk.hw,
+		[CLKID_HDMI_PLL]	    = &gxbb_hdmi_pll.hw,
+		[CLKID_FIXED_PLL]	    = &gxbb_fixed_pll.hw,
+		[CLKID_FCLK_DIV2]	    = &gxbb_fclk_div2.hw,
+		[CLKID_FCLK_DIV3]	    = &gxbb_fclk_div3.hw,
+		[CLKID_FCLK_DIV4]	    = &gxbb_fclk_div4.hw,
+		[CLKID_FCLK_DIV5]	    = &gxbb_fclk_div5.hw,
+		[CLKID_FCLK_DIV7]	    = &gxbb_fclk_div7.hw,
+		[CLKID_GP0_PLL]		    = &gxl_gp0_pll.hw,
+		[CLKID_MPEG_SEL]	    = &gxbb_mpeg_clk_sel.hw,
+		[CLKID_MPEG_DIV]	    = &gxbb_mpeg_clk_div.hw,
+		[CLKID_CLK81]		    = &gxbb_clk81.hw,
+		[CLKID_MPLL0]		    = &gxbb_mpll0.hw,
+		[CLKID_MPLL1]		    = &gxbb_mpll1.hw,
+		[CLKID_MPLL2]		    = &gxbb_mpll2.hw,
+		[CLKID_DDR]		    = &gxbb_ddr.hw,
+		[CLKID_DOS]		    = &gxbb_dos.hw,
+		[CLKID_ISA]		    = &gxbb_isa.hw,
+		[CLKID_PL301]		    = &gxbb_pl301.hw,
+		[CLKID_PERIPHS]		    = &gxbb_periphs.hw,
+		[CLKID_SPICC]		    = &gxbb_spicc.hw,
+		[CLKID_I2C]		    = &gxbb_i2c.hw,
+		[CLKID_SAR_ADC]		    = &gxbb_sar_adc.hw,
+		[CLKID_SMART_CARD]	    = &gxbb_smart_card.hw,
+		[CLKID_RNG0]		    = &gxbb_rng0.hw,
+		[CLKID_UART0]		    = &gxbb_uart0.hw,
+		[CLKID_SDHC]		    = &gxbb_sdhc.hw,
+		[CLKID_STREAM]		    = &gxbb_stream.hw,
+		[CLKID_ASYNC_FIFO]	    = &gxbb_async_fifo.hw,
+		[CLKID_SDIO]		    = &gxbb_sdio.hw,
+		[CLKID_ABUF]		    = &gxbb_abuf.hw,
+		[CLKID_HIU_IFACE]	    = &gxbb_hiu_iface.hw,
+		[CLKID_ASSIST_MISC]	    = &gxbb_assist_misc.hw,
+		[CLKID_SPI]		    = &gxbb_spi.hw,
+		[CLKID_I2S_SPDIF]	    = &gxbb_i2s_spdif.hw,
+		[CLKID_ETH]		    = &gxbb_eth.hw,
+		[CLKID_DEMUX]		    = &gxbb_demux.hw,
+		[CLKID_AIU_GLUE]	    = &gxbb_aiu_glue.hw,
+		[CLKID_IEC958]		    = &gxbb_iec958.hw,
+		[CLKID_I2S_OUT]		    = &gxbb_i2s_out.hw,
+		[CLKID_AMCLK]		    = &gxbb_amclk.hw,
+		[CLKID_AIFIFO2]		    = &gxbb_aififo2.hw,
+		[CLKID_MIXER]		    = &gxbb_mixer.hw,
+		[CLKID_MIXER_IFACE]	    = &gxbb_mixer_iface.hw,
+		[CLKID_ADC]		    = &gxbb_adc.hw,
+		[CLKID_BLKMV]		    = &gxbb_blkmv.hw,
+		[CLKID_AIU]		    = &gxbb_aiu.hw,
+		[CLKID_UART1]		    = &gxbb_uart1.hw,
+		[CLKID_G2D]		    = &gxbb_g2d.hw,
+		[CLKID_USB0]		    = &gxbb_usb0.hw,
+		[CLKID_USB1]		    = &gxbb_usb1.hw,
+		[CLKID_RESET]		    = &gxbb_reset.hw,
+		[CLKID_NAND]		    = &gxbb_nand.hw,
+		[CLKID_DOS_PARSER]	    = &gxbb_dos_parser.hw,
+		[CLKID_USB]		    = &gxbb_usb.hw,
+		[CLKID_VDIN1]		    = &gxbb_vdin1.hw,
+		[CLKID_AHB_ARB0]	    = &gxbb_ahb_arb0.hw,
+		[CLKID_EFUSE]		    = &gxbb_efuse.hw,
+		[CLKID_BOOT_ROM]	    = &gxbb_boot_rom.hw,
+		[CLKID_AHB_DATA_BUS]	    = &gxbb_ahb_data_bus.hw,
+		[CLKID_AHB_CTRL_BUS]	    = &gxbb_ahb_ctrl_bus.hw,
+		[CLKID_HDMI_INTR_SYNC]	    = &gxbb_hdmi_intr_sync.hw,
+		[CLKID_HDMI_PCLK]	    = &gxbb_hdmi_pclk.hw,
+		[CLKID_USB1_DDR_BRIDGE]	    = &gxbb_usb1_ddr_bridge.hw,
+		[CLKID_USB0_DDR_BRIDGE]	    = &gxbb_usb0_ddr_bridge.hw,
+		[CLKID_MMC_PCLK]	    = &gxbb_mmc_pclk.hw,
+		[CLKID_DVIN]		    = &gxbb_dvin.hw,
+		[CLKID_UART2]		    = &gxbb_uart2.hw,
+		[CLKID_SANA]		    = &gxbb_sana.hw,
+		[CLKID_VPU_INTR]	    = &gxbb_vpu_intr.hw,
+		[CLKID_SEC_AHB_AHB3_BRIDGE] = &gxbb_sec_ahb_ahb3_bridge.hw,
+		[CLKID_CLK81_A53]	    = &gxbb_clk81_a53.hw,
+		[CLKID_VCLK2_VENCI0]	    = &gxbb_vclk2_venci0.hw,
+		[CLKID_VCLK2_VENCI1]	    = &gxbb_vclk2_venci1.hw,
+		[CLKID_VCLK2_VENCP0]	    = &gxbb_vclk2_vencp0.hw,
+		[CLKID_VCLK2_VENCP1]	    = &gxbb_vclk2_vencp1.hw,
+		[CLKID_GCLK_VENCI_INT0]	    = &gxbb_gclk_venci_int0.hw,
+		[CLKID_GCLK_VENCI_INT]	    = &gxbb_gclk_vencp_int.hw,
+		[CLKID_DAC_CLK]		    = &gxbb_dac_clk.hw,
+		[CLKID_AOCLK_GATE]	    = &gxbb_aoclk_gate.hw,
+		[CLKID_IEC958_GATE]	    = &gxbb_iec958_gate.hw,
+		[CLKID_ENC480P]		    = &gxbb_enc480p.hw,
+		[CLKID_RNG1]		    = &gxbb_rng1.hw,
+		[CLKID_GCLK_VENCI_INT1]	    = &gxbb_gclk_venci_int1.hw,
+		[CLKID_VCLK2_VENCLMCC]	    = &gxbb_vclk2_venclmcc.hw,
+		[CLKID_VCLK2_VENCL]	    = &gxbb_vclk2_vencl.hw,
+		[CLKID_VCLK_OTHER]	    = &gxbb_vclk_other.hw,
+		[CLKID_EDP]		    = &gxbb_edp.hw,
+		[CLKID_AO_MEDIA_CPU]	    = &gxbb_ao_media_cpu.hw,
+		[CLKID_AO_AHB_SRAM]	    = &gxbb_ao_ahb_sram.hw,
+		[CLKID_AO_AHB_BUS]	    = &gxbb_ao_ahb_bus.hw,
+		[CLKID_AO_IFACE]	    = &gxbb_ao_iface.hw,
+		[CLKID_AO_I2C]		    = &gxbb_ao_i2c.hw,
+		[CLKID_SD_EMMC_A]	    = &gxbb_emmc_a.hw,
+		[CLKID_SD_EMMC_B]	    = &gxbb_emmc_b.hw,
+		[CLKID_SD_EMMC_C]	    = &gxbb_emmc_c.hw,
+		[CLKID_SAR_ADC_CLK]	    = &gxbb_sar_adc_clk.hw,
+		[CLKID_SAR_ADC_SEL]	    = &gxbb_sar_adc_clk_sel.hw,
+		[CLKID_SAR_ADC_DIV]	    = &gxbb_sar_adc_clk_div.hw,
+		[CLKID_MALI_0_SEL]	    = &gxbb_mali_0_sel.hw,
+		[CLKID_MALI_0_DIV]	    = &gxbb_mali_0_div.hw,
+		[CLKID_MALI_0]		    = &gxbb_mali_0.hw,
+		[CLKID_MALI_1_SEL]	    = &gxbb_mali_1_sel.hw,
+		[CLKID_MALI_1_DIV]	    = &gxbb_mali_1_div.hw,
+		[CLKID_MALI_1]		    = &gxbb_mali_1.hw,
+		[CLKID_MALI]		    = &gxbb_mali.hw,
 	},
 	.num = NR_CLKS,
 };
@@ -810,13 +1171,20 @@ static struct meson_clk_pll *const gxbb_clk_plls[] = {
 	&gxbb_gp0_pll,
 };
 
+static struct meson_clk_pll *const gxl_clk_plls[] = {
+	&gxbb_fixed_pll,
+	&gxbb_hdmi_pll,
+	&gxbb_sys_pll,
+	&gxl_gp0_pll,
+};
+
 static struct meson_clk_mpll *const gxbb_clk_mplls[] = {
 	&gxbb_mpll0,
 	&gxbb_mpll1,
 	&gxbb_mpll2,
 };
 
-static struct clk_gate *gxbb_clk_gates[] = {
+static struct clk_gate *const gxbb_clk_gates[] = {
 	&gxbb_clk81,
 	&gxbb_ddr,
 	&gxbb_dos,
@@ -900,16 +1268,89 @@ static struct clk_gate *gxbb_clk_gates[] = {
 	&gxbb_emmc_b,
 	&gxbb_emmc_c,
 	&gxbb_sar_adc_clk,
+	&gxbb_mali_0,
+	&gxbb_mali_1,
+};
+
+static struct clk_mux *const gxbb_clk_muxes[] = {
+	&gxbb_mpeg_clk_sel,
+	&gxbb_sar_adc_clk_sel,
+	&gxbb_mali_0_sel,
+	&gxbb_mali_1_sel,
+	&gxbb_mali,
+};
+
+static struct clk_divider *const gxbb_clk_dividers[] = {
+	&gxbb_mpeg_clk_div,
+	&gxbb_sar_adc_clk_div,
+	&gxbb_mali_0_div,
+	&gxbb_mali_1_div,
+};
+
+struct clkc_data {
+	struct clk_gate *const *clk_gates;
+	unsigned int clk_gates_count;
+	struct meson_clk_mpll *const *clk_mplls;
+	unsigned int clk_mplls_count;
+	struct meson_clk_pll *const *clk_plls;
+	unsigned int clk_plls_count;
+	struct clk_mux *const *clk_muxes;
+	unsigned int clk_muxes_count;
+	struct clk_divider *const *clk_dividers;
+	unsigned int clk_dividers_count;
+	struct meson_clk_cpu *cpu_clk;
+	struct clk_hw_onecell_data *hw_onecell_data;
+};
+
+static const struct clkc_data gxbb_clkc_data = {
+	.clk_gates = gxbb_clk_gates,
+	.clk_gates_count = ARRAY_SIZE(gxbb_clk_gates),
+	.clk_mplls = gxbb_clk_mplls,
+	.clk_mplls_count = ARRAY_SIZE(gxbb_clk_mplls),
+	.clk_plls = gxbb_clk_plls,
+	.clk_plls_count = ARRAY_SIZE(gxbb_clk_plls),
+	.clk_muxes = gxbb_clk_muxes,
+	.clk_muxes_count = ARRAY_SIZE(gxbb_clk_muxes),
+	.clk_dividers = gxbb_clk_dividers,
+	.clk_dividers_count = ARRAY_SIZE(gxbb_clk_dividers),
+	.cpu_clk = &gxbb_cpu_clk,
+	.hw_onecell_data = &gxbb_hw_onecell_data,
+};
+
+static const struct clkc_data gxl_clkc_data = {
+	.clk_gates = gxbb_clk_gates,
+	.clk_gates_count = ARRAY_SIZE(gxbb_clk_gates),
+	.clk_mplls = gxbb_clk_mplls,
+	.clk_mplls_count = ARRAY_SIZE(gxbb_clk_mplls),
+	.clk_plls = gxl_clk_plls,
+	.clk_plls_count = ARRAY_SIZE(gxl_clk_plls),
+	.clk_muxes = gxbb_clk_muxes,
+	.clk_muxes_count = ARRAY_SIZE(gxbb_clk_muxes),
+	.clk_dividers = gxbb_clk_dividers,
+	.clk_dividers_count = ARRAY_SIZE(gxbb_clk_dividers),
+	.cpu_clk = &gxbb_cpu_clk,
+	.hw_onecell_data = &gxl_hw_onecell_data,
+};
+
+static const struct of_device_id clkc_match_table[] = {
+	{ .compatible = "amlogic,gxbb-clkc", .data = &gxbb_clkc_data },
+	{ .compatible = "amlogic,gxl-clkc", .data = &gxl_clkc_data },
+	{},
 };
 
 static int gxbb_clkc_probe(struct platform_device *pdev)
 {
+	const struct clkc_data *clkc_data;
 	void __iomem *clk_base;
 	int ret, clkid, i;
 	struct clk_hw *parent_hw;
 	struct clk *parent_clk;
 	struct device *dev = &pdev->dev;
 
+	clkc_data = of_device_get_match_data(&pdev->dev);
+	if (!clkc_data)
+		return -EINVAL;
+
 	/*  Generic clocks and PLLs */
 	clk_base = of_iomap(dev->of_node, 0);
 	if (!clk_base) {
@@ -918,34 +1359,37 @@ static int gxbb_clkc_probe(struct platform_device *pdev)
 	}
 
 	/* Populate base address for PLLs */
-	for (i = 0; i < ARRAY_SIZE(gxbb_clk_plls); i++)
-		gxbb_clk_plls[i]->base = clk_base;
+	for (i = 0; i < clkc_data->clk_plls_count; i++)
+		clkc_data->clk_plls[i]->base = clk_base;
 
 	/* Populate base address for MPLLs */
-	for (i = 0; i < ARRAY_SIZE(gxbb_clk_mplls); i++)
-		gxbb_clk_mplls[i]->base = clk_base;
+	for (i = 0; i < clkc_data->clk_mplls_count; i++)
+		clkc_data->clk_mplls[i]->base = clk_base;
 
 	/* Populate the base address for CPU clk */
-	gxbb_cpu_clk.base = clk_base;
+	clkc_data->cpu_clk->base = clk_base;
 
-	/* Populate the base address for the MPEG clks */
-	gxbb_mpeg_clk_sel.reg = clk_base + (u64)gxbb_mpeg_clk_sel.reg;
-	gxbb_mpeg_clk_div.reg = clk_base + (u64)gxbb_mpeg_clk_div.reg;
+	/* Populate base address for gates */
+	for (i = 0; i < clkc_data->clk_gates_count; i++)
+		clkc_data->clk_gates[i]->reg = clk_base +
+			(u64)clkc_data->clk_gates[i]->reg;
 
-	/* Populate the base address for the SAR ADC clks */
-	gxbb_sar_adc_clk_sel.reg = clk_base + (u64)gxbb_sar_adc_clk_sel.reg;
-	gxbb_sar_adc_clk_div.reg = clk_base + (u64)gxbb_sar_adc_clk_div.reg;
+	/* Populate base address for muxes */
+	for (i = 0; i < clkc_data->clk_muxes_count; i++)
+		clkc_data->clk_muxes[i]->reg = clk_base +
+			(u64)clkc_data->clk_muxes[i]->reg;
 
-	/* Populate base address for gates */
-	for (i = 0; i < ARRAY_SIZE(gxbb_clk_gates); i++)
-		gxbb_clk_gates[i]->reg = clk_base +
-			(u64)gxbb_clk_gates[i]->reg;
+	/* Populate base address for dividers */
+	for (i = 0; i < clkc_data->clk_dividers_count; i++)
+		clkc_data->clk_dividers[i]->reg = clk_base +
+			(u64)clkc_data->clk_dividers[i]->reg;
 
 	/*
 	 * register all clks
 	 */
-	for (clkid = 0; clkid < NR_CLKS; clkid++) {
-		ret = devm_clk_hw_register(dev, gxbb_hw_onecell_data.hws[clkid]);
+	for (clkid = 0; clkid < clkc_data->hw_onecell_data->num; clkid++) {
+		ret = devm_clk_hw_register(dev,
+					clkc_data->hw_onecell_data->hws[clkid]);
 		if (ret)
 			goto iounmap;
 	}
@@ -964,9 +1408,9 @@ static int gxbb_clkc_probe(struct platform_device *pdev)
 	 * a new clk_hw, and this hack will no longer work. Releasing the ccr
 	 * feature before that time solves the problem :-)
 	 */
-	parent_hw = clk_hw_get_parent(&gxbb_cpu_clk.hw);
+	parent_hw = clk_hw_get_parent(&clkc_data->cpu_clk->hw);
 	parent_clk = parent_hw->clk;
-	ret = clk_notifier_register(parent_clk, &gxbb_cpu_clk.clk_nb);
+	ret = clk_notifier_register(parent_clk, &clkc_data->cpu_clk->clk_nb);
 	if (ret) {
 		pr_err("%s: failed to register clock notifier for cpu_clk\n",
 				__func__);
@@ -974,23 +1418,18 @@ static int gxbb_clkc_probe(struct platform_device *pdev)
 	}
 
 	return of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get,
-			&gxbb_hw_onecell_data);
+			clkc_data->hw_onecell_data);
 
 iounmap:
 	iounmap(clk_base);
 	return ret;
 }
 
-static const struct of_device_id gxbb_clkc_match_table[] = {
-	{ .compatible = "amlogic,gxbb-clkc" },
-	{ }
-};
-
 static struct platform_driver gxbb_driver = {
 	.probe		= gxbb_clkc_probe,
 	.driver		= {
 		.name	= "gxbb-clkc",
-		.of_match_table = gxbb_clkc_match_table,
+		.of_match_table = clkc_match_table,
 	},
 };
 

drivers/clk/meson/gxbb.h

@@ -71,6 +71,8 @@
 #define HHI_GP0_PLL_CNTL2		0x44 /* 0x11 offset in data sheet */
 #define HHI_GP0_PLL_CNTL3		0x48 /* 0x12 offset in data sheet */
 #define HHI_GP0_PLL_CNTL4		0x4c /* 0x13 offset in data sheet */
+#define	HHI_GP0_PLL_CNTL5		0x50 /* 0x14 offset in data sheet */
+#define	HHI_GP0_PLL_CNTL1		0x58 /* 0x16 offset in data sheet */
 
 #define HHI_XTAL_DIVN_CNTL		0xbc /* 0x2f offset in data sheet */
 #define HHI_TIMER90K			0xec /* 0x3b offset in data sheet */
@@ -177,7 +179,7 @@
 /* CLKID_FCLK_DIV4 */
 #define CLKID_FCLK_DIV5		  7
 #define CLKID_FCLK_DIV7		  8
-#define CLKID_GP0_PLL		  9
+/* CLKID_GP0_PLL */
 #define CLKID_MPEG_SEL		  10
 #define CLKID_MPEG_DIV		  11
 /* CLKID_CLK81 */
@@ -206,16 +208,16 @@
 #define CLKID_I2S_SPDIF		  35
 /* CLKID_ETH */
 #define CLKID_DEMUX		  37
-#define CLKID_AIU_GLUE		  38
+/* CLKID_AIU_GLUE */
 #define CLKID_IEC958		  39
-#define CLKID_I2S_OUT		  40
+/* CLKID_I2S_OUT */
 #define CLKID_AMCLK		  41
 #define CLKID_AIFIFO2		  42
 #define CLKID_MIXER		  43
-#define CLKID_MIXER_IFACE	  44
+/* CLKID_MIXER_IFACE */
 #define CLKID_ADC		  45
 #define CLKID_BLKMV		  46
-#define CLKID_AIU		  47
+/* CLKID_AIU */
 #define CLKID_UART1		  48
 #define CLKID_G2D		  49
 /* CLKID_USB0 */
@@ -248,7 +250,7 @@
 /* CLKID_GCLK_VENCI_INT0 */
 #define CLKID_GCLK_VENCI_INT	  78
 #define CLKID_DAC_CLK		  79
-#define CLKID_AOCLK_GATE	  80
+/* CLKID_AOCLK_GATE */
 #define CLKID_IEC958_GATE	  81
 #define CLKID_ENC480P		  82
 #define CLKID_RNG1		  83
@@ -268,8 +270,15 @@
 /* CLKID_SAR_ADC_CLK */
 /* CLKID_SAR_ADC_SEL */
 #define CLKID_SAR_ADC_DIV	  99
+/* CLKID_MALI_0_SEL */
+#define CLKID_MALI_0_DIV	 101
+/* CLKID_MALI_0	*/
+/* CLKID_MALI_1_SEL */
+#define CLKID_MALI_1_DIV	 104
+/* CLKID_MALI_1	*/
+/* CLKID_MALI	*/
 
-#define NR_CLKS			  100
+#define NR_CLKS			  107
 
 /* include the CLKIDs that have been made part of the stable DT binding */
 #include <dt-bindings/clock/gxbb-clkc.h>

drivers/clk/meson/meson8b.c

@@ -245,6 +245,96 @@ static struct clk_fixed_factor meson8b_fclk_div7 = {
 	},
 };
 
+static struct meson_clk_mpll meson8b_mpll0 = {
+	.sdm = {
+		.reg_off = HHI_MPLL_CNTL7,
+		.shift   = 0,
+		.width   = 14,
+	},
+	.sdm_en = {
+		.reg_off = HHI_MPLL_CNTL7,
+		.shift   = 15,
+		.width   = 1,
+	},
+	.n2 = {
+		.reg_off = HHI_MPLL_CNTL7,
+		.shift   = 16,
+		.width   = 9,
+	},
+	.en = {
+		.reg_off = HHI_MPLL_CNTL7,
+		.shift   = 14,
+		.width   = 1,
+	},
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll0",
+		.ops = &meson_clk_mpll_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct meson_clk_mpll meson8b_mpll1 = {
+	.sdm = {
+		.reg_off = HHI_MPLL_CNTL8,
+		.shift   = 0,
+		.width   = 14,
+	},
+	.sdm_en = {
+		.reg_off = HHI_MPLL_CNTL8,
+		.shift   = 15,
+		.width   = 1,
+	},
+	.n2 = {
+		.reg_off = HHI_MPLL_CNTL8,
+		.shift   = 16,
+		.width   = 9,
+	},
+	.en = {
+		.reg_off = HHI_MPLL_CNTL8,
+		.shift   = 14,
+		.width   = 1,
+	},
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll1",
+		.ops = &meson_clk_mpll_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct meson_clk_mpll meson8b_mpll2 = {
+	.sdm = {
+		.reg_off = HHI_MPLL_CNTL9,
+		.shift   = 0,
+		.width   = 14,
+	},
+	.sdm_en = {
+		.reg_off = HHI_MPLL_CNTL9,
+		.shift   = 15,
+		.width   = 1,
+	},
+	.n2 = {
+		.reg_off = HHI_MPLL_CNTL9,
+		.shift   = 16,
+		.width   = 9,
+	},
+	.en = {
+		.reg_off = HHI_MPLL_CNTL9,
+		.shift   = 14,
+		.width   = 1,
+	},
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll2",
+		.ops = &meson_clk_mpll_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
 /*
  * FIXME cpu clocks and the legacy composite clocks (e.g. clk81) are both PLL
  * post-dividers and should be modeled with their respective PLLs via the
@@ -491,6 +581,9 @@ static struct clk_hw_onecell_data meson8b_hw_onecell_data = {
 		[CLKID_AO_AHB_SRAM]	    = &meson8b_ao_ahb_sram.hw,
 		[CLKID_AO_AHB_BUS]	    = &meson8b_ao_ahb_bus.hw,
 		[CLKID_AO_IFACE]	    = &meson8b_ao_iface.hw,
+		[CLKID_MPLL0]		    = &meson8b_mpll0.hw,
+		[CLKID_MPLL1]		    = &meson8b_mpll1.hw,
+		[CLKID_MPLL2]		    = &meson8b_mpll2.hw,
 	},
 	.num = CLK_NR_CLKS,
 };
@@ -501,7 +594,13 @@ static struct meson_clk_pll *const meson8b_clk_plls[] = {
 	&meson8b_sys_pll,
 };
 
-static struct clk_gate *meson8b_clk_gates[] = {
+static struct meson_clk_mpll *const meson8b_clk_mplls[] = {
+	&meson8b_mpll0,
+	&meson8b_mpll1,
+	&meson8b_mpll2,
+};
+
+static struct clk_gate *const meson8b_clk_gates[] = {
 	&meson8b_clk81,
 	&meson8b_ddr,
 	&meson8b_dos,
@@ -582,6 +681,14 @@ static struct clk_gate *meson8b_clk_gates[] = {
 	&meson8b_ao_iface,
 };
 
+static struct clk_mux *const meson8b_clk_muxes[] = {
+	&meson8b_mpeg_clk_sel,
+};
+
+static struct clk_divider *const meson8b_clk_dividers[] = {
+	&meson8b_mpeg_clk_div,
+};
+
 static int meson8b_clkc_probe(struct platform_device *pdev)
 {
 	void __iomem *clk_base;
@@ -601,18 +708,28 @@ static int meson8b_clkc_probe(struct platform_device *pdev)
 	for (i = 0; i < ARRAY_SIZE(meson8b_clk_plls); i++)
 		meson8b_clk_plls[i]->base = clk_base;
 
+	/* Populate base address for MPLLs */
+	for (i = 0; i < ARRAY_SIZE(meson8b_clk_mplls); i++)
+		meson8b_clk_mplls[i]->base = clk_base;
+
 	/* Populate the base address for CPU clk */
 	meson8b_cpu_clk.base = clk_base;
 
-	/* Populate the base address for the MPEG clks */
-	meson8b_mpeg_clk_sel.reg = clk_base + (u32)meson8b_mpeg_clk_sel.reg;
-	meson8b_mpeg_clk_div.reg = clk_base + (u32)meson8b_mpeg_clk_div.reg;
-
 	/* Populate base address for gates */
 	for (i = 0; i < ARRAY_SIZE(meson8b_clk_gates); i++)
 		meson8b_clk_gates[i]->reg = clk_base +
 			(u32)meson8b_clk_gates[i]->reg;
 
+	/* Populate base address for muxes */
+	for (i = 0; i < ARRAY_SIZE(meson8b_clk_muxes); i++)
+		meson8b_clk_muxes[i]->reg = clk_base +
+			(u32)meson8b_clk_muxes[i]->reg;
+
+	/* Populate base address for dividers */
+	for (i = 0; i < ARRAY_SIZE(meson8b_clk_dividers); i++)
+		meson8b_clk_dividers[i]->reg = clk_base +
+			(u32)meson8b_clk_dividers[i]->reg;
+
 	/*
 	 * register all clks
 	 * CLKID_UNUSED = 0, so skip it and start with CLKID_XTAL = 1

drivers/clk/meson/meson8b.h

@@ -41,6 +41,21 @@
 #define HHI_SYS_PLL_CNTL		0x300 /* 0xc0 offset in data sheet */
 #define HHI_VID_PLL_CNTL		0x320 /* 0xc8 offset in data sheet */
 
+/*
+ * MPLL register offeset taken from the S905 datasheet. Vendor kernel source
+ * confirm these are the same for the S805.
+ */
+#define HHI_MPLL_CNTL			0x280 /* 0xa0 offset in data sheet */
+#define HHI_MPLL_CNTL2			0x284 /* 0xa1 offset in data sheet */
+#define HHI_MPLL_CNTL3			0x288 /* 0xa2 offset in data sheet */
+#define HHI_MPLL_CNTL4			0x28C /* 0xa3 offset in data sheet */
+#define HHI_MPLL_CNTL5			0x290 /* 0xa4 offset in data sheet */
+#define HHI_MPLL_CNTL6			0x294 /* 0xa5 offset in data sheet */
+#define HHI_MPLL_CNTL7			0x298 /* 0xa6 offset in data sheet */
+#define HHI_MPLL_CNTL8			0x29C /* 0xa7 offset in data sheet */
+#define HHI_MPLL_CNTL9			0x2A0 /* 0xa8 offset in data sheet */
+#define HHI_MPLL_CNTL10			0x2A4 /* 0xa9 offset in data sheet */
+
 /*
  * CLKID index values
  *
@@ -142,8 +157,11 @@
 #define CLKID_AO_AHB_SRAM	90
 #define CLKID_AO_AHB_BUS	91
 #define CLKID_AO_IFACE		92
+#define CLKID_MPLL0		93
+#define CLKID_MPLL1		94
+#define CLKID_MPLL2		95
 
-#define CLK_NR_CLKS		93
+#define CLK_NR_CLKS		96
 
 /* include the CLKIDs that have been made part of the stable DT binding */
 #include <dt-bindings/clock/meson8b-clkc.h>

include/dt-bindings/clock/gxbb-clkc.h

@@ -10,12 +10,17 @@
 #define CLKID_FCLK_DIV2		4
 #define CLKID_FCLK_DIV3		5
 #define CLKID_FCLK_DIV4		6
+#define CLKID_GP0_PLL		9
 #define CLKID_CLK81		12
 #define CLKID_MPLL2		15
 #define CLKID_SPI		34
 #define CLKID_I2C		22
 #define CLKID_SAR_ADC		23
 #define CLKID_ETH		36
+#define CLKID_AIU_GLUE		38
+#define CLKID_I2S_OUT		40
+#define CLKID_MIXER_IFACE	44
+#define CLKID_AIU		47
 #define CLKID_USB0		50
 #define CLKID_USB1		51
 #define CLKID_USB		55
@@ -24,11 +29,17 @@
 #define CLKID_USB0_DDR_BRIDGE	65
 #define CLKID_SANA		69
 #define CLKID_GCLK_VENCI_INT0	77
+#define CLKID_AOCLK_GATE	80
 #define CLKID_AO_I2C		93
 #define CLKID_SD_EMMC_A		94
 #define CLKID_SD_EMMC_B		95
 #define CLKID_SD_EMMC_C		96
 #define CLKID_SAR_ADC_CLK	97
 #define CLKID_SAR_ADC_SEL	98
+#define CLKID_MALI_0_SEL	100
+#define CLKID_MALI_0		102
+#define CLKID_MALI_1_SEL	103
+#define CLKID_MALI_1		105
+#define CLKID_MALI		106
 
 #endif /* __GXBB_CLKC_H */