extcon: max14577: Choose muic_irqs according to device type

This patch continues the preparation for adding support for max77836
device to existing max14577 driver.

During probe choose muic_irqs according to device type. Currently there
are only "max14577_muic_irqs" but later patch will add max77836
interrupts.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

drivers/extcon/extcon-max14577.c

@@ -39,6 +39,29 @@ enum max14577_muic_status {
 	MAX14577_MUIC_STATUS_END,
 };
 
+/**
+ * struct max14577_muic_irq
+ * @irq: the index of irq list of MUIC device.
+ * @name: the name of irq.
+ * @virq: the virtual irq to use irq domain
+ */
+struct max14577_muic_irq {
+	unsigned int irq;
+	const char *name;
+	unsigned int virq;
+};
+
+static struct max14577_muic_irq max14577_muic_irqs[] = {
+	{ MAX14577_IRQ_INT1_ADC,	"muic-ADC" },
+	{ MAX14577_IRQ_INT1_ADCLOW,	"muic-ADCLOW" },
+	{ MAX14577_IRQ_INT1_ADCERR,	"muic-ADCError" },
+	{ MAX14577_IRQ_INT2_CHGTYP,	"muic-CHGTYP" },
+	{ MAX14577_IRQ_INT2_CHGDETRUN,	"muic-CHGDETRUN" },
+	{ MAX14577_IRQ_INT2_DCDTMR,	"muic-DCDTMR" },
+	{ MAX14577_IRQ_INT2_DBCHG,	"muic-DBCHG" },
+	{ MAX14577_IRQ_INT2_VBVOLT,	"muic-VBVOLT" },
+};
+
 struct max14577_muic_info {
 	struct device *dev;
 	struct max14577 *max14577;
@@ -47,6 +70,8 @@ struct max14577_muic_info {
 	int prev_chg_type;
 	u8 status[MAX14577_MUIC_STATUS_END];
 
+	struct max14577_muic_irq *muic_irqs;
+	unsigned int muic_irqs_num;
 	bool irq_adc;
 	bool irq_chg;
 	struct work_struct irq_work;
@@ -73,29 +98,6 @@ enum max14577_muic_cable_group {
 	MAX14577_CABLE_GROUP_CHG,
 };
 
-/**
- * struct max14577_muic_irq
- * @irq: the index of irq list of MUIC device.
- * @name: the name of irq.
- * @virq: the virtual irq to use irq domain
- */
-struct max14577_muic_irq {
-	unsigned int irq;
-	const char *name;
-	unsigned int virq;
-};
-
-static struct max14577_muic_irq max14577_muic_irqs[] = {
-	{ MAX14577_IRQ_INT1_ADC,	"muic-ADC" },
-	{ MAX14577_IRQ_INT1_ADCLOW,	"muic-ADCLOW" },
-	{ MAX14577_IRQ_INT1_ADCERR,	"muic-ADCError" },
-	{ MAX14577_IRQ_INT2_CHGTYP,	"muic-CHGTYP" },
-	{ MAX14577_IRQ_INT2_CHGDETRUN,	"muic-CHGDETRUN" },
-	{ MAX14577_IRQ_INT2_DCDTMR,	"muic-DCDTMR" },
-	{ MAX14577_IRQ_INT2_DBCHG,	"muic-DBCHG" },
-	{ MAX14577_IRQ_INT2_VBVOLT,	"muic-VBVOLT" },
-};
-
 /* Define supported accessory type */
 enum max14577_muic_acc_type {
 	MAX14577_MUIC_ADC_GROUND = 0x0,
@@ -538,9 +540,9 @@ static irqreturn_t max14577_muic_irq_handler(int irq, void *data)
 	 * However we only need to know whether it was ADC, charger
 	 * or both interrupts so decode IRQ and turn on proper flags.
 	 */
-	for (i = 0; i < ARRAY_SIZE(max14577_muic_irqs); i++)
-		if (irq == max14577_muic_irqs[i].virq)
-			irq_type = max14577_muic_irqs[i].irq;
+	for (i = 0; i < info->muic_irqs_num; i++)
+		if (irq == info->muic_irqs[i].virq)
+			irq_type = info->muic_irqs[i].irq;
 
 	switch (irq_type) {
 	case MAX14577_IRQ_INT1_ADC:
@@ -643,9 +645,16 @@ static int max14577_muic_probe(struct platform_device *pdev)
 
 	INIT_WORK(&info->irq_work, max14577_muic_irq_work);
 
+	switch (max14577->dev_type) {
+	case MAXIM_DEVICE_TYPE_MAX14577:
+	default:
+		info->muic_irqs = max14577_muic_irqs;
+		info->muic_irqs_num = ARRAY_SIZE(max14577_muic_irqs);
+	}
+
 	/* Support irq domain for max14577 MUIC device */
-	for (i = 0; i < ARRAY_SIZE(max14577_muic_irqs); i++) {
-		struct max14577_muic_irq *muic_irq = &max14577_muic_irqs[i];
+	for (i = 0; i < info->muic_irqs_num; i++) {
+		struct max14577_muic_irq *muic_irq = &info->muic_irqs[i];
 		unsigned int virq = 0;
 
 		virq = regmap_irq_get_virq(max14577->irq_data, muic_irq->irq);