Merge branch 'sh/stable-updates'

Documentation/networking/3c509.txt

@@ -48,11 +48,11 @@ for LILO parameters for doing this:
 This configures the first found 3c509 card for IRQ 10, base I/O 0x310, and
 transceiver type 3 (10base2). The flag "0x3c509" must be set to avoid conflicts
 with other card types when overriding the I/O address. When the driver is
-loaded as a module, only the IRQ and transceiver setting may be overridden.
-For example, setting two cards to 10base2/IRQ10 and AUI/IRQ11 is done by using
-the xcvr and irq module options:
+loaded as a module, only the IRQ may be overridden. For example,
+setting two cards to IRQ10 and IRQ11 is done by using the irq module
+option:
 
-   options 3c509 xcvr=3,1 irq=10,11
+   options 3c509 irq=10,11
 
 
 (2) Full-duplex mode
@@ -77,6 +77,8 @@ operation.
 itself full-duplex capable. This is almost certainly one of two things: a full-
 duplex-capable  Ethernet switch (*not* a hub), or a full-duplex-capable NIC on
 another system that's connected directly to the 3c509B via a crossover cable.
+
+Full-duplex mode can be enabled using 'ethtool'.
  
 /////Extremely important caution concerning full-duplex mode/////
 Understand that the 3c509B's hardware's full-duplex support is much more
@@ -113,6 +115,8 @@ This insured that merely upgrading the driver from an earlier version would
 never automatically enable full-duplex mode in an existing installation;
 it must always be explicitly enabled via one of these code in order to be
 activated.
+
+The transceiver type can be changed using 'ethtool'.
   
 
 (4a) Interpretation of error messages and common problems

MAINTAINERS

@@ -410,9 +410,8 @@ F:	drivers/i2c/busses/i2c-ali1563.c
 
 ALPHA PORT
 M:	Richard Henderson <rth@twiddle.net>
-S:	Odd Fixes for 2.4; Maintained for 2.6.
 M:	Ivan Kokshaysky <ink@jurassic.park.msu.ru>
-S:	Maintained for 2.4; PCI support for 2.6.
+M:	Matt Turner <mattst88@gmail.com>
 L:	linux-alpha@vger.kernel.org
 F:	arch/alpha/
 
@@ -3940,29 +3939,20 @@ S:	Maintained
 F:	sound/soc/omap/
 
 OMAP FRAMEBUFFER SUPPORT
-M:	Imre Deak <imre.deak@nokia.com>
+M:	Tomi Valkeinen <tomi.valkeinen@nokia.com>
 L:	linux-fbdev@vger.kernel.org
 L:	linux-omap@vger.kernel.org
 S:	Maintained
 F:	drivers/video/omap/
 
-OMAP DISPLAY SUBSYSTEM SUPPORT (DSS2)
+OMAP DISPLAY SUBSYSTEM and FRAMEBUFFER SUPPORT (DSS2)
 M:	Tomi Valkeinen <tomi.valkeinen@nokia.com>
 L:	linux-omap@vger.kernel.org
-L:	linux-fbdev@vger.kernel.org (moderated for non-subscribers)
+L:	linux-fbdev@vger.kernel.org
 S:	Maintained
-F:	drivers/video/omap2/dss/
-F:	drivers/video/omap2/vrfb.c
-F:	drivers/video/omap2/vram.c
+F:	drivers/video/omap2/
 F:	Documentation/arm/OMAP/DSS
 
-OMAP FRAMEBUFFER SUPPORT (FOR DSS2)
-M:	Tomi Valkeinen <tomi.valkeinen@nokia.com>
-L:	linux-omap@vger.kernel.org
-L:	linux-fbdev@vger.kernel.org (moderated for non-subscribers)
-S:	Maintained
-F:	drivers/video/omap2/omapfb/
-
 OMAP MMC SUPPORT
 M:	Jarkko Lavinen <jarkko.lavinen@nokia.com>
 L:	linux-omap@vger.kernel.org

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 33
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
 NAME = Man-Eating Seals of Antiquity
 
 # *DOCUMENTATION*
@@ -18,10 +18,9 @@ MAKEFLAGS += -rR --no-print-directory
 
 # Avoid funny character set dependencies
 unexport LC_ALL
-LC_CTYPE=C
 LC_COLLATE=C
 LC_NUMERIC=C
-export LC_CTYPE LC_COLLATE LC_NUMERIC
+export LC_COLLATE LC_NUMERIC
 
 # We are using a recursive build, so we need to do a little thinking
 # to get the ordering right.

arch/alpha/include/asm/topology.h

@@ -28,6 +28,9 @@ static const struct cpumask *cpumask_of_node(int node)
 {
 	int cpu;
 
+	if (node == -1)
+		return cpu_all_mask;
+
 	cpumask_clear(&node_to_cpumask_map[node]);
 
 	for_each_online_cpu(cpu) {

arch/arm/configs/u300_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Sat Oct 17 23:32:24 2009
+# Linux kernel version: 2.6.33-rc2
+# Wed Jan  6 00:01:36 2010
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -46,6 +46,7 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -119,14 +120,41 @@ CONFIG_BLOCK=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
 CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -155,6 +183,7 @@ CONFIG_MMU=y
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
 # CONFIG_ARCH_KIRKWOOD is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
@@ -177,6 +206,7 @@ CONFIG_ARCH_U300=y
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
 # CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
 
 #
 # ST-Ericsson AB U300/U330/U335/U365 Platform
@@ -265,12 +295,10 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_SPLIT_PTLOCK_CPUS=999999
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
@@ -499,14 +527,21 @@ CONFIG_MTD_NAND_IDS=y
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -517,6 +552,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_LEGACY is not set
 # CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IWMC3200TOP is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -539,6 +575,7 @@ CONFIG_HAVE_IDE=y
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -645,7 +682,6 @@ CONFIG_I2C_STU300=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -661,6 +697,8 @@ CONFIG_SPI_MASTER=y
 # CONFIG_SPI_BITBANG is not set
 # CONFIG_SPI_GPIO is not set
 CONFIG_SPI_PL022=y
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
 
 #
 # SPI Protocol Masters
@@ -708,6 +746,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_T7L66XB is not set
 # CONFIG_MFD_TC6387XB is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
@@ -716,6 +755,8 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_AB3100_CORE=y
 CONFIG_AB3100_OTP=y
 # CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
 CONFIG_REGULATOR=y
 # CONFIG_REGULATOR_DEBUG is not set
 # CONFIG_REGULATOR_FIXED_VOLTAGE is not set
@@ -723,6 +764,7 @@ CONFIG_REGULATOR=y
 # CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
 # CONFIG_REGULATOR_BQ24022 is not set
 # CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
 # CONFIG_REGULATOR_LP3971 is not set
 CONFIG_REGULATOR_AB3100=y
 # CONFIG_REGULATOR_TPS65023 is not set
@@ -840,7 +882,9 @@ CONFIG_LEDS_CLASS=y
 # CONFIG_LEDS_LP3944 is not set
 # CONFIG_LEDS_PCA955X is not set
 # CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_REGULATOR is not set
 # CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
 
 #
 # LED Triggers
@@ -882,6 +926,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -911,7 +956,9 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 CONFIG_RTC_DRV_AB3100=y
 
@@ -926,6 +973,15 @@ CONFIG_DMADEVICES=y
 #
 # DMA Devices
 #
+CONFIG_COH901318=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_DMATEST is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 
@@ -1018,7 +1074,7 @@ CONFIG_MISC_FILESYSTEMS=y
 CONFIG_MSDOS_PARTITION=y
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
+CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_CODEPAGE_737 is not set
 # CONFIG_NLS_CODEPAGE_775 is not set
 # CONFIG_NLS_CODEPAGE_850 is not set
@@ -1135,6 +1191,7 @@ CONFIG_ARM_UNWIND=y
 # CONFIG_DEBUG_ERRORS is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_LL is not set
+# CONFIG_OC_ETM is not set
 
 #
 # Security options
@@ -1142,7 +1199,11 @@ CONFIG_ARM_UNWIND=y
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 # CONFIG_CRYPTO is not set
 # CONFIG_BINARY_PRINTF is not set
 

arch/arm/include/asm/cpu.h

@@ -11,6 +11,7 @@
 #define __ASM_ARM_CPU_H
 
 #include <linux/percpu.h>
+#include <linux/cpu.h>
 
 struct cpuinfo_arm {
 	struct cpu	cpu;

arch/arm/include/asm/dma.h

@@ -138,12 +138,12 @@ extern int  get_dma_residue(unsigned int chan);
 #define NO_DMA	255
 #endif
 
+#endif /* CONFIG_ISA_DMA_API */
+
 #ifdef CONFIG_PCI
 extern int isa_dma_bridge_buggy;
 #else
 #define isa_dma_bridge_buggy    (0)
 #endif
 
-#endif /* CONFIG_ISA_DMA_API */
-
 #endif /* __ASM_ARM_DMA_H */

arch/arm/include/asm/ptrace.h

@@ -97,9 +97,15 @@
  * stack during a system call.  Note that sizeof(struct pt_regs)
  * has to be a multiple of 8.
  */
+#ifndef __KERNEL__
 struct pt_regs {
 	long uregs[18];
 };
+#else /* __KERNEL__ */
+struct pt_regs {
+	unsigned long uregs[18];
+};
+#endif /* __KERNEL__ */
 
 #define ARM_cpsr	uregs[16]
 #define ARM_pc		uregs[15]

arch/arm/include/asm/unistd.h

@@ -391,6 +391,7 @@
 #define __NR_pwritev			(__NR_SYSCALL_BASE+362)
 #define __NR_rt_tgsigqueueinfo		(__NR_SYSCALL_BASE+363)
 #define __NR_perf_event_open		(__NR_SYSCALL_BASE+364)
+#define __NR_recvmmsg			(__NR_SYSCALL_BASE+365)
 
 /*
  * The following SWIs are ARM private.

arch/arm/kernel/entry-armv.S

@@ -957,9 +957,7 @@ kuser_cmpxchg_fixup:
 
 #else
 
-#ifdef CONFIG_SMP
-	mcr	p15, 0, r0, c7, c10, 5	@ dmb
-#endif
+	smp_dmb
 1:	ldrex	r3, [r2]
 	subs	r3, r3, r0
 	strexeq	r3, r1, [r2]

arch/arm/kernel/process.c

@@ -212,7 +212,8 @@ void __show_regs(struct pt_regs *regs)
 	char buf[64];
 
 	printk("CPU: %d    %s  (%s %.*s)\n",
-		smp_processor_id(), print_tainted(), init_utsname()->release,
+		raw_smp_processor_id(), print_tainted(),
+		init_utsname()->release,
 		(int)strcspn(init_utsname()->version, " "),
 		init_utsname()->version);
 	print_symbol("PC is at %s\n", instruction_pointer(regs));

arch/arm/mach-davinci/include/mach/keyscan.h

@@ -29,6 +29,7 @@ enum davinci_matrix_types {
 };
 
 struct davinci_ks_platform_data {
+	int		(*device_enable)(struct device *dev);
 	unsigned short	*keymap;
 	u32		keymapsize;
 	u8		rep:1;

arch/arm/mach-lh7a40x/clocks.c

@@ -10,6 +10,8 @@
 #include <mach/hardware.h>
 #include <mach/clocks.h>
 #include <linux/err.h>
+#include <linux/device.h>
+#include <linux/string.h>
 
 struct module;
 

arch/arm/mach-pxa/include/mach/hardware.h

@@ -250,20 +250,17 @@
 
 #define cpu_is_pxa930()					\
 	({						\
-		unsigned int id = read_cpuid(CPUID_ID);	\
-		__cpu_is_pxa930(id);			\
+		__cpu_is_pxa930(read_cpuid_id());	\
 	 })
 
 #define cpu_is_pxa935()					\
 	({						\
-		unsigned int id = read_cpuid(CPUID_ID);	\
-		__cpu_is_pxa935(id);			\
+		__cpu_is_pxa935(read_cpuid_id());	\
 	 })
 
 #define cpu_is_pxa950()					\
 	({						\
-		unsigned int id = read_cpuid(CPUID_ID);	\
-		__cpu_is_pxa950(id);			\
+		__cpu_is_pxa950(read_cpuid_id());	\
 	 })
 
 

arch/arm/mach-pxa/magician.c

@@ -381,7 +381,7 @@ err:
 	return ret;
 }
 
-static int magician_backlight_notify(int brightness)
+static int magician_backlight_notify(struct device *dev, int brightness)
 {
 	gpio_set_value(EGPIO_MAGICIAN_BL_POWER, brightness);
 	if (brightness >= 200) {

arch/arm/mach-pxa/palmld.c

@@ -270,7 +270,7 @@ err:
 	return ret;
 }
 
-static int palmld_backlight_notify(int brightness)
+static int palmld_backlight_notify(struct device *dev, int brightness)
 {
 	gpio_set_value(GPIO_NR_PALMLD_BL_POWER, brightness);
 	gpio_set_value(GPIO_NR_PALMLD_LCD_POWER, brightness);

arch/arm/mach-pxa/palmt5.c

@@ -209,7 +209,7 @@ err:
 	return ret;
 }
 
-static int palmt5_backlight_notify(int brightness)
+static int palmt5_backlight_notify(struct device *dev, int brightness)
 {
 	gpio_set_value(GPIO_NR_PALMT5_BL_POWER, brightness);
 	gpio_set_value(GPIO_NR_PALMT5_LCD_POWER, brightness);

arch/arm/mach-pxa/palmtc.c

@@ -185,7 +185,7 @@ err:
 	return ret;
 }
 
-static int palmtc_backlight_notify(int brightness)
+static int palmtc_backlight_notify(struct device *dev, int brightness)
 {
 	/* backlight is on when GPIO16 AF0 is high */
 	gpio_set_value(GPIO_NR_PALMTC_BL_POWER, brightness);

arch/arm/mach-pxa/palmte2.c

@@ -181,7 +181,7 @@ err:
 	return ret;
 }
 
-static int palmte2_backlight_notify(int brightness)
+static int palmte2_backlight_notify(struct device *dev, int brightness)
 {
 	gpio_set_value(GPIO_NR_PALMTE2_BL_POWER, brightness);
 	gpio_set_value(GPIO_NR_PALMTE2_LCD_POWER, brightness);

arch/arm/mach-pxa/palmtreo.c

@@ -375,7 +375,7 @@ err:
 	return ret;
 }
 
-static int treo_backlight_notify(int brightness)
+static int treo_backlight_notify(struct device *dev, int brightness)
 {
 	gpio_set_value(GPIO_NR_TREO_BL_POWER, brightness);
 	return TREO_MAX_INTENSITY - brightness;

arch/arm/mach-pxa/palmtx.c

@@ -269,7 +269,7 @@ err:
 	return ret;
 }
 
-static int palmtx_backlight_notify(int brightness)
+static int palmtx_backlight_notify(struct device *dev, int brightness)
 {
 	gpio_set_value(GPIO_NR_PALMTX_BL_POWER, brightness);
 	gpio_set_value(GPIO_NR_PALMTX_LCD_POWER, brightness);

arch/arm/mach-pxa/palmz72.c

@@ -196,7 +196,7 @@ err:
 	return ret;
 }
 
-static int palmz72_backlight_notify(int brightness)
+static int palmz72_backlight_notify(struct device *dev, int brightness)
 {
 	gpio_set_value(GPIO_NR_PALMZ72_BL_POWER, brightness);
 	gpio_set_value(GPIO_NR_PALMZ72_LCD_POWER, brightness);

arch/arm/mach-pxa/spitz.c

@@ -389,13 +389,13 @@ static struct gpio_keys_button spitz_gpio_keys[] = {
 		.type	= EV_SW,
 		.code	= 0,
 		.gpio	= SPITZ_GPIO_SWA,
-		.desc	= "Display Down",
+		.desc	= "Display Down",
 	},
 	{
 		.type	= EV_SW,
 		.code	= 1,
 		.gpio	= SPITZ_GPIO_SWB,
-		.desc	= "Lid Closed",
+		.desc	= "Lid Closed",
 	},
 };
 

arch/arm/mach-pxa/viper.c

@@ -379,7 +379,7 @@ err_request_bckl:
 	return ret;
 }
 
-static int viper_backlight_notify(int brightness)
+static int viper_backlight_notify(struct device *dev, int brightness)
 {
 	gpio_set_value(VIPER_LCD_EN_GPIO, !!brightness);
 	gpio_set_value(VIPER_BCKLIGHT_EN_GPIO, !!brightness);

arch/arm/mach-realview/include/mach/board-pb1176.h

@@ -74,8 +74,8 @@
 #define REALVIEW_PB1176_L220_BASE		0x10110000 /* L220 registers */
 
 /*
- * Control register SYS_RESETCTL is set to 1 to force a soft reset
+ * Control register SYS_RESETCTL Bit 8 is set to 1 to force a soft reset
  */
-#define REALVIEW_PB1176_SYS_LOCKVAL_RSTCTL    0x0100
+#define REALVIEW_PB1176_SYS_SOFT_RESET    0x0100
 
 #endif	/* __ASM_ARCH_BOARD_PB1176_H */

arch/arm/mach-realview/include/mach/platform.h

@@ -140,7 +140,7 @@
  *     SYS_CLD, SYS_BOOTCS
  */
 #define REALVIEW_SYS_LOCK_LOCKED    (1 << 16)
-#define REALVIEW_SYS_LOCKVAL_MASK	0xA05F	       /* Enable write access */
+#define REALVIEW_SYS_LOCK_VAL	0xA05F	       /* Enable write access */
 
 /*
  * REALVIEW_SYS_FLASH

arch/arm/mach-realview/realview_eb.c

@@ -381,6 +381,20 @@ static struct sys_timer realview_eb_timer = {
 	.init		= realview_eb_timer_init,
 };
 
+static void realview_eb_reset(char mode)
+{
+	void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
+	void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
+
+	/*
+	 * To reset, we hit the on-board reset register
+	 * in the system FPGA
+	 */
+	__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
+	if (core_tile_eb11mp())
+		__raw_writel(0x0008, reset_ctrl);
+}
+
 static void __init realview_eb_init(void)
 {
 	int i;
@@ -408,6 +422,7 @@ static void __init realview_eb_init(void)
 #ifdef CONFIG_LEDS
 	leds_event = realview_leds_event;
 #endif
+	realview_reset = realview_eb_reset;
 }
 
 MACHINE_START(REALVIEW_EB, "ARM-RealView EB")

arch/arm/mach-realview/realview_pb1176.c

@@ -292,12 +292,10 @@ static struct sys_timer realview_pb1176_timer = {
 
 static void realview_pb1176_reset(char mode)
 {
-	void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) +
-		REALVIEW_SYS_RESETCTL_OFFSET;
-	void __iomem *rst_hdr_ctrl = __io_address(REALVIEW_SYS_BASE) +
-		REALVIEW_SYS_LOCK_OFFSET;
-	__raw_writel(REALVIEW_SYS_LOCKVAL_MASK, rst_hdr_ctrl);
-	__raw_writel(REALVIEW_PB1176_SYS_LOCKVAL_RSTCTL, hdr_ctrl);
+	void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
+	void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
+	__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
+	__raw_writel(REALVIEW_PB1176_SYS_SOFT_RESET, reset_ctrl);
 }
 
 static void realview_pb1176_fixup(struct machine_desc *mdesc,

arch/arm/mach-realview/realview_pb11mp.c

@@ -301,17 +301,16 @@ static struct sys_timer realview_pb11mp_timer = {
 
 static void realview_pb11mp_reset(char mode)
 {
-	void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) +
-		REALVIEW_SYS_RESETCTL_OFFSET;
-	unsigned int val;
+	void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
+	void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
 
 	/*
 	 * To reset, we hit the on-board reset register
 	 * in the system FPGA
 	 */
-	val = __raw_readl(hdr_ctrl);
-	val |= REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGCLR;
-	__raw_writel(val, hdr_ctrl);
+	__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
+	__raw_writel(0x0000, reset_ctrl);
+	__raw_writel(0x0004, reset_ctrl);
 }
 
 static void __init realview_pb11mp_init(void)

arch/arm/mach-realview/realview_pba8.c

@@ -272,6 +272,20 @@ static struct sys_timer realview_pba8_timer = {
 	.init		= realview_pba8_timer_init,
 };
 
+static void realview_pba8_reset(char mode)
+{
+	void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
+	void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
+
+	/*
+	 * To reset, we hit the on-board reset register
+	 * in the system FPGA
+	 */
+	__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
+	__raw_writel(0x0000, reset_ctrl);
+	__raw_writel(0x0004, reset_ctrl);
+}
+
 static void __init realview_pba8_init(void)
 {
 	int i;
@@ -291,6 +305,7 @@ static void __init realview_pba8_init(void)
 #ifdef CONFIG_LEDS
 	leds_event = realview_leds_event;
 #endif
+	realview_reset = realview_pba8_reset;
 }
 
 MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")

arch/arm/mach-realview/realview_pbx.c

@@ -324,6 +324,20 @@ static void realview_pbx_fixup(struct machine_desc *mdesc, struct tag *tags,
 #endif
 }
 
+static void realview_pbx_reset(char mode)
+{
+	void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
+	void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
+
+	/*
+	 * To reset, we hit the on-board reset register
+	 * in the system FPGA
+	 */
+	__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
+	__raw_writel(0x0000, reset_ctrl);
+	__raw_writel(0x0004, reset_ctrl);
+}
+
 static void __init realview_pbx_init(void)
 {
 	int i;
@@ -358,6 +372,7 @@ static void __init realview_pbx_init(void)
 #ifdef CONFIG_LEDS
 	leds_event = realview_leds_event;
 #endif
+	realview_reset = realview_pbx_reset;
 }
 
 MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")

arch/arm/mach-s3c2440/mach-mini2440.c

@@ -288,7 +288,7 @@ static struct s3c2410_platform_nand mini2440_nand_info __initdata = {
 
 /* DM9000AEP 10/100 ethernet controller */
 
-static struct resource mini2440_dm9k_resource[] __initdata = {
+static struct resource mini2440_dm9k_resource[] = {
 	[0] = {
 		.start = MACH_MINI2440_DM9K_BASE,
 		.end   = MACH_MINI2440_DM9K_BASE + 3,
@@ -310,11 +310,11 @@ static struct resource mini2440_dm9k_resource[] __initdata = {
  * The DM9000 has no eeprom, and it's MAC address is set by
  * the bootloader before starting the kernel.
  */
-static struct dm9000_plat_data mini2440_dm9k_pdata __initdata = {
+static struct dm9000_plat_data mini2440_dm9k_pdata = {
 	.flags		= (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
 };
 
-static struct platform_device mini2440_device_eth __initdata = {
+static struct platform_device mini2440_device_eth = {
 	.name		= "dm9000",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(mini2440_dm9k_resource),
@@ -341,7 +341,7 @@ static struct platform_device mini2440_device_eth __initdata = {
  *	|  |  +----+  +----+
  *	  .....
  */
-static struct gpio_keys_button mini2440_buttons[] __initdata = {
+static struct gpio_keys_button mini2440_buttons[] = {
 	{
 		.gpio		= S3C2410_GPG(0),		/* K1 */
 		.code		= KEY_F1,
@@ -384,12 +384,12 @@ static struct gpio_keys_button mini2440_buttons[] __initdata = {
 #endif
 };
 
-static struct gpio_keys_platform_data mini2440_button_data __initdata = {
+static struct gpio_keys_platform_data mini2440_button_data = {
 	.buttons	= mini2440_buttons,
 	.nbuttons	= ARRAY_SIZE(mini2440_buttons),
 };
 
-static struct platform_device mini2440_button_device __initdata = {
+static struct platform_device mini2440_button_device = {
 	.name		= "gpio-keys",
 	.id		= -1,
 	.dev		= {
@@ -399,41 +399,41 @@ static struct platform_device mini2440_button_device __initdata = {
 
 /* LEDS */
 
-static struct s3c24xx_led_platdata mini2440_led1_pdata __initdata = {
+static struct s3c24xx_led_platdata mini2440_led1_pdata = {
 	.name		= "led1",
 	.gpio		= S3C2410_GPB(5),
 	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.def_trigger	= "heartbeat",
 };
 
-static struct s3c24xx_led_platdata mini2440_led2_pdata __initdata = {
+static struct s3c24xx_led_platdata mini2440_led2_pdata = {
 	.name		= "led2",
 	.gpio		= S3C2410_GPB(6),
 	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.def_trigger	= "nand-disk",
 };
 
-static struct s3c24xx_led_platdata mini2440_led3_pdata __initdata = {
+static struct s3c24xx_led_platdata mini2440_led3_pdata = {
 	.name		= "led3",
 	.gpio		= S3C2410_GPB(7),
 	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.def_trigger	= "mmc0",
 };
 
-static struct s3c24xx_led_platdata mini2440_led4_pdata __initdata = {
+static struct s3c24xx_led_platdata mini2440_led4_pdata = {
 	.name		= "led4",
 	.gpio		= S3C2410_GPB(8),
 	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.def_trigger	= "",
 };
 
-static struct s3c24xx_led_platdata mini2440_led_backlight_pdata __initdata = {
+static struct s3c24xx_led_platdata mini2440_led_backlight_pdata = {
 	.name		= "backlight",
 	.gpio		= S3C2410_GPG(4),
 	.def_trigger	= "backlight",
 };
 
-static struct platform_device mini2440_led1 __initdata = {
+static struct platform_device mini2440_led1 = {
 	.name		= "s3c24xx_led",
 	.id		= 1,
 	.dev		= {
@@ -441,7 +441,7 @@ static struct platform_device mini2440_led1 __initdata = {
 	},
 };
 
-static struct platform_device mini2440_led2 __initdata = {
+static struct platform_device mini2440_led2 = {
 	.name		= "s3c24xx_led",
 	.id		= 2,
 	.dev		= {
@@ -449,7 +449,7 @@ static struct platform_device mini2440_led2 __initdata = {
 	},
 };
 
-static struct platform_device mini2440_led3 __initdata = {
+static struct platform_device mini2440_led3 = {
 	.name		= "s3c24xx_led",
 	.id		= 3,
 	.dev		= {
@@ -457,7 +457,7 @@ static struct platform_device mini2440_led3 __initdata = {
 	},
 };
 
-static struct platform_device mini2440_led4 __initdata = {
+static struct platform_device mini2440_led4 = {
 	.name		= "s3c24xx_led",
 	.id		= 4,
 	.dev		= {
@@ -465,7 +465,7 @@ static struct platform_device mini2440_led4 __initdata = {
 	},
 };
 
-static struct platform_device mini2440_led_backlight __initdata = {
+static struct platform_device mini2440_led_backlight = {
 	.name		= "s3c24xx_led",
 	.id		= 5,
 	.dev		= {
@@ -475,14 +475,14 @@ static struct platform_device mini2440_led_backlight __initdata = {
 
 /* AUDIO */
 
-static struct s3c24xx_uda134x_platform_data mini2440_audio_pins __initdata = {
+static struct s3c24xx_uda134x_platform_data mini2440_audio_pins = {
 	.l3_clk = S3C2410_GPB(4),
 	.l3_mode = S3C2410_GPB(2),
 	.l3_data = S3C2410_GPB(3),
 	.model = UDA134X_UDA1341
 };
 
-static struct platform_device mini2440_audio __initdata = {
+static struct platform_device mini2440_audio = {
 	.name		= "s3c24xx_uda134x",
 	.id		= 0,
 	.dev		= {

arch/arm/mach-s3c6410/mach-smdk6410.c

@@ -211,6 +211,7 @@ static struct fixed_voltage_config smdk6410_b_pwr_5v_pdata = {
 	.supply_name = "B_PWR_5V",
 	.microvolts = 5000000,
 	.init_data = &smdk6410_b_pwr_5v_data,
+	.gpio = -EINVAL,
 };
 
 static struct platform_device smdk6410_b_pwr_5v = {

arch/arm/mm/Makefile

@@ -27,6 +27,9 @@ obj-$(CONFIG_CPU_ABRT_EV5TJ)	+= abort-ev5tj.o
 obj-$(CONFIG_CPU_ABRT_EV6)	+= abort-ev6.o
 obj-$(CONFIG_CPU_ABRT_EV7)	+= abort-ev7.o
 
+AFLAGS_abort-ev6.o	:=-Wa,-march=armv6k
+AFLAGS_abort-ev7.o	:=-Wa,-march=armv7-a
+
 obj-$(CONFIG_CPU_PABRT_LEGACY)	+= pabort-legacy.o
 obj-$(CONFIG_CPU_PABRT_V6)	+= pabort-v6.o
 obj-$(CONFIG_CPU_PABRT_V7)	+= pabort-v7.o
@@ -39,6 +42,9 @@ obj-$(CONFIG_CPU_CACHE_V6)	+= cache-v6.o
 obj-$(CONFIG_CPU_CACHE_V7)	+= cache-v7.o
 obj-$(CONFIG_CPU_CACHE_FA)	+= cache-fa.o
 
+AFLAGS_cache-v6.o	:=-Wa,-march=armv6
+AFLAGS_cache-v7.o	:=-Wa,-march=armv7-a
+
 obj-$(CONFIG_CPU_COPY_V3)	+= copypage-v3.o
 obj-$(CONFIG_CPU_COPY_V4WT)	+= copypage-v4wt.o
 obj-$(CONFIG_CPU_COPY_V4WB)	+= copypage-v4wb.o
@@ -58,6 +64,9 @@ obj-$(CONFIG_CPU_TLB_V6)	+= tlb-v6.o
 obj-$(CONFIG_CPU_TLB_V7)	+= tlb-v7.o
 obj-$(CONFIG_CPU_TLB_FA)	+= tlb-fa.o
 
+AFLAGS_tlb-v6.o		:=-Wa,-march=armv6
+AFLAGS_tlb-v7.o		:=-Wa,-march=armv7-a
+
 obj-$(CONFIG_CPU_ARM610)	+= proc-arm6_7.o
 obj-$(CONFIG_CPU_ARM710)	+= proc-arm6_7.o
 obj-$(CONFIG_CPU_ARM7TDMI)	+= proc-arm7tdmi.o
@@ -84,6 +93,9 @@ obj-$(CONFIG_CPU_FEROCEON)	+= proc-feroceon.o
 obj-$(CONFIG_CPU_V6)		+= proc-v6.o
 obj-$(CONFIG_CPU_V7)		+= proc-v7.o
 
+AFLAGS_proc-v6.o	:=-Wa,-march=armv6
+AFLAGS_proc-v7.o	:=-Wa,-march=armv7-a
+
 obj-$(CONFIG_CACHE_FEROCEON_L2)	+= cache-feroceon-l2.o
 obj-$(CONFIG_CACHE_L2X0)	+= cache-l2x0.o
 obj-$(CONFIG_CACHE_XSC3L2)	+= cache-xsc3l2.o

arch/arm/mm/cache-xsc3l2.c

@@ -221,15 +221,14 @@ static int __init xsc3_l2_init(void)
 	if (!cpu_is_xsc3() || !xsc3_l2_present())
 		return 0;
 
-	if (!(get_cr() & CR_L2)) {
+	if (get_cr() & CR_L2) {
 		pr_info("XScale3 L2 cache enabled.\n");
-		adjust_cr(CR_L2, CR_L2);
 		xsc3_l2_inv_all();
-	}
 
-	outer_cache.inv_range = xsc3_l2_inv_range;
-	outer_cache.clean_range = xsc3_l2_clean_range;
-	outer_cache.flush_range = xsc3_l2_flush_range;
+		outer_cache.inv_range = xsc3_l2_inv_range;
+		outer_cache.clean_range = xsc3_l2_clean_range;
+		outer_cache.flush_range = xsc3_l2_flush_range;
+	}
 
 	return 0;
 }

arch/arm/mm/proc-xsc3.S

@@ -407,6 +407,13 @@ __xsc3_setup:
 
 	adr	r5, xsc3_crval
 	ldmia	r5, {r5, r6}
+
+#ifdef CONFIG_CACHE_XSC3L2
+	mrc	p15, 1, r0, c0, c0, 1		@ get L2 present information
+	ands	r0, r0, #0xf8
+	orrne	r6, r6, #(1 << 26)		@ enable L2 if present
+#endif
+
 	mrc	p15, 0, r0, c1, c0, 0		@ get control register
 	bic	r0, r0, r5			@ ..V. ..R. .... ..A.
 	orr	r0, r0, r6			@ ..VI Z..S .... .C.M (mmu)

arch/arm/plat-s3c/dev-nand.c

@@ -58,8 +58,8 @@ static int __init s3c_nand_copy_set(struct s3c2410_nand_set *set)
 			return -ENOMEM;
 	}
 	
-	size = sizeof(int) * set->nr_chips;
-	if (size) {
+	if (set->nr_map && set->nr_chips) {
+		size = sizeof(int) * set->nr_chips;
 		ptr = kmemdup(set->nr_map, size, GFP_KERNEL);
 		set->nr_map = ptr;
 

arch/m68k/include/asm/io_no.h

@@ -3,6 +3,7 @@
 
 #ifdef __KERNEL__
 
+#include <asm/virtconvert.h>
 
 /*
  * These are for ISA/PCI shared memory _only_ and should never be used
@@ -165,19 +166,6 @@ static inline void *ioremap_fullcache(unsigned long physaddr, unsigned long size
 
 extern void iounmap(void *addr);
 
-/* Pages to physical address... */
-#define page_to_phys(page)      ((page - mem_map) << PAGE_SHIFT)
-#define page_to_bus(page)       ((page - mem_map) << PAGE_SHIFT)
-
-/*
- * Macros used for converting between virtual and physical mappings.
- */
-#define phys_to_virt(vaddr)	((void *) (vaddr))
-#define virt_to_phys(vaddr)	((unsigned long) (vaddr))
-
-#define virt_to_bus virt_to_phys
-#define bus_to_virt phys_to_virt
-
 /*
  * Convert a physical pointer to a virtual kernel pointer for /dev/mem
  * access

arch/m68k/include/asm/page_no.h

@@ -56,8 +56,8 @@ extern unsigned long memory_end;
 
 #ifndef __ASSEMBLY__
 
-#define __pa(vaddr)		virt_to_phys((void *)(vaddr))
-#define __va(paddr)		phys_to_virt((unsigned long)(paddr))
+#define __pa(vaddr)		((unsigned long)(vaddr))
+#define __va(paddr)		((void *)(paddr))
 
 #define virt_to_pfn(kaddr)	(__pa(kaddr) >> PAGE_SHIFT)
 #define pfn_to_virt(pfn)	__va((pfn) << PAGE_SHIFT)

arch/m68k/include/asm/virtconvert.h

@@ -26,6 +26,7 @@ static inline void *phys_to_virt(unsigned long address)
 }
 
 /* Permanent address of a page. */
+#ifdef CONFIG_MMU
 #ifdef CONFIG_SINGLE_MEMORY_CHUNK
 #define page_to_phys(page) \
 	__pa(PAGE_OFFSET + (((page) - pg_data_map[0].node_mem_map) << PAGE_SHIFT))
@@ -37,6 +38,9 @@ static inline void *phys_to_virt(unsigned long address)
 	page_to_pfn(__page) << PAGE_SHIFT;				\
 })
 #endif
+#else
+#define page_to_phys(page)	(((page) - mem_map) << PAGE_SHIFT)
+#endif
 
 /*
  * IO bus memory addresses are 1:1 with the physical address,

arch/m68knommu/platform/coldfire/pit.c

@@ -146,7 +146,6 @@ static struct clocksource pit_clk = {
 	.read	= pit_read_clk,
 	.shift	= 20,
 	.mask	= CLOCKSOURCE_MASK(32),
-	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
 /***************************************************************************/

arch/mips/alchemy/common/dbdma.c

@@ -613,7 +613,7 @@ u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags)
 	dma_cache_wback_inv((unsigned long)buf, nbytes);
 	dp->dscr_cmd0 |= DSCR_CMD0_V;	/* Let it rip */
 	au_sync();
-	dma_cache_wback_inv((unsigned long)dp, sizeof(dp));
+	dma_cache_wback_inv((unsigned long)dp, sizeof(*dp));
 	ctp->chan_ptr->ddma_dbell = 0;
 
 	/* Get next descriptor pointer.	*/
@@ -676,7 +676,7 @@ _au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags)
 	dma_cache_inv((unsigned long)buf, nbytes);
 	dp->dscr_cmd0 |= DSCR_CMD0_V;	/* Let it rip */
 	au_sync();
-	dma_cache_wback_inv((unsigned long)dp, sizeof(dp));
+	dma_cache_wback_inv((unsigned long)dp, sizeof(*dp));
 	ctp->chan_ptr->ddma_dbell = 0;
 
 	/* Get next descriptor pointer.	*/

arch/mips/ar7/prom.c

@@ -219,14 +219,6 @@ static void __init console_config(void)
 	if (strstr(prom_getcmdline(), "console="))
 		return;
 
-#ifdef CONFIG_KGDB
-	if (!strstr(prom_getcmdline(), "nokgdb")) {
-		strcat(prom_getcmdline(), " console=kgdb");
-		kgdb_enabled = 1;
-		return;
-	}
-#endif
-
 	s = prom_getenv("modetty0");
 	if (s) {
 		baud = simple_strtoul(s, &p, 10);
@@ -280,13 +272,6 @@ static inline void serial_out(int offset, int value)
 	writel(value, (void *)PORT(offset));
 }
 
-char prom_getchar(void)
-{
-	while (!(serial_in(UART_LSR) & UART_LSR_DR))
-		;
-	return serial_in(UART_RX);
-}
-
 int prom_putchar(char c)
 {
 	while ((serial_in(UART_LSR) & UART_LSR_TEMT) == 0)

arch/mips/bcm63xx/boards/board_bcm963xx.c

@@ -346,27 +346,26 @@ static struct board_info __initdata board_96348gw = {
 };
 
 static struct board_info __initdata board_FAST2404 = {
-        .name                           = "F@ST2404",
-        .expected_cpu_id                = 0x6348,
-
-        .has_enet0                      = 1,
-        .has_enet1                      = 1,
-        .has_pci                        = 1,
+	.name				= "F@ST2404",
+	.expected_cpu_id		= 0x6348,
 
-        .enet0 = {
-                .has_phy                = 1,
-                .use_internal_phy       = 1,
-        },
+	.has_enet0			= 1,
+	.has_enet1			= 1,
+	.has_pci			= 1,
 
-        .enet1 = {
-                .force_speed_100        = 1,
-                .force_duplex_full      = 1,
-        },
+	.enet0 = {
+		.has_phy		= 1,
+		.use_internal_phy	= 1,
+	},
 
+	.enet1 = {
+		.force_speed_100	= 1,
+		.force_duplex_full	= 1,
+	},
 
-        .has_ohci0 = 1,
-        .has_pccard = 1,
-        .has_ehci0 = 1,
+	.has_ohci0			= 1,
+	.has_pccard			= 1,
+	.has_ehci0			= 1,
 };
 
 static struct board_info __initdata board_DV201AMR = {

arch/mips/bcm63xx/prom.c

@@ -40,9 +40,6 @@ void __init prom_init(void)
 	reg &= ~mask;
 	bcm_perf_writel(reg, PERF_CKCTL_REG);
 
-	/* assign command line from kernel config */
-	strcpy(arcs_cmdline, CONFIG_CMDLINE);
-
 	/* register gpiochip */
 	bcm63xx_gpio_init();
 

arch/mips/boot/.gitignore

@@ -1,4 +1,5 @@
 mkboot
 elf2ecoff
+vmlinux.*
 zImage
 zImage.tmp

arch/mips/boot/Makefile

@@ -28,7 +28,7 @@ VMLINUX = vmlinux
 all: vmlinux.ecoff vmlinux.srec
 
 vmlinux.ecoff: $(obj)/elf2ecoff $(VMLINUX)
-	$(obj)/elf2ecoff $(VMLINUX) vmlinux.ecoff $(E2EFLAGS)
+	$(obj)/elf2ecoff $(VMLINUX) $(obj)/vmlinux.ecoff $(E2EFLAGS)
 
 $(obj)/elf2ecoff: $(obj)/elf2ecoff.c
 	$(HOSTCC) -o $@ $^

arch/mips/boot/compressed/Makefile

@@ -56,7 +56,7 @@ $(obj)/piggy.o: $(obj)/vmlinux.$(suffix_y) $(obj)/dummy.o
 LDFLAGS_vmlinuz := $(LDFLAGS) -Ttext $(VMLINUZ_LOAD_ADDRESS) -T
 vmlinuz: $(src)/ld.script $(obj-y) $(obj)/piggy.o
 	$(call if_changed,ld)
-	$(Q)$(OBJCOPY) $(OBJCOPYFLAGS) -R .comment -R .stab -R .stabstr -R .initrd -R .sysmap $@
+	$(Q)$(OBJCOPY) $(OBJCOPYFLAGS) $@
 
 #
 # Some DECstations need all possible sections of an ECOFF executable
@@ -84,14 +84,11 @@ vmlinuz.ecoff: $(obj)/../elf2ecoff $(VMLINUZ)
 $(obj)/../elf2ecoff: $(src)/../elf2ecoff.c
 	$(Q)$(HOSTCC) -o $@ $^
 
-drop-sections	= .reginfo .mdebug .comment .note .pdr .options .MIPS.options
-strip-flags	= $(addprefix --remove-section=,$(drop-sections))
-
-OBJCOPYFLAGS_vmlinuz.bin := $(OBJCOPYFLAGS) -O binary $(strip-flags)
+OBJCOPYFLAGS_vmlinuz.bin := $(OBJCOPYFLAGS) -O binary
 vmlinuz.bin: vmlinuz
 	$(call if_changed,objcopy)
 
-OBJCOPYFLAGS_vmlinuz.srec := $(OBJCOPYFLAGS) -S -O srec $(strip-flags)
+OBJCOPYFLAGS_vmlinuz.srec := $(OBJCOPYFLAGS) -S -O srec
 vmlinuz.srec: vmlinuz
 	$(call if_changed,objcopy)
 

arch/mips/boot/compressed/decompress.c

@@ -28,8 +28,6 @@ char *zimage_start;
 
 /* The linker tells us where the image is. */
 extern unsigned char __image_begin, __image_end;
-extern unsigned char __ramdisk_begin, __ramdisk_end;
-unsigned long initrd_size;
 
 /* debug interfaces  */
 extern void puts(const char *s);
@@ -102,14 +100,6 @@ void decompress_kernel(unsigned long boot_heap_start)
 	puthex((unsigned long)(zimage_size + zimage_start));
 	puts("\n");
 
-	if (initrd_size) {
-		puts("initrd at:     ");
-		puthex((unsigned long)(&__ramdisk_begin));
-		puts(" ");
-		puthex((unsigned long)(&__ramdisk_end));
-		puts("\n");
-	}
-
 	/* this area are prepared for mallocing when decompressing */
 	free_mem_ptr = boot_heap_start;
 	free_mem_end_ptr = boot_heap_start + BOOT_HEAP_SIZE;

arch/mips/boot/compressed/ld.script

@@ -1,150 +1,67 @@
+/*
+ * ld.script for compressed kernel support of MIPS
+ *
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin <wuzj@lemote.com>
+ */
+
 OUTPUT_ARCH(mips)
 ENTRY(start)
 SECTIONS
 {
-  /* Read-only sections, merged into text segment: */
-  .init          : { *(.init)		} =0
-  .text      :
-  {
-    _ftext = . ;
-    *(.text)
-    *(.rodata)
-    *(.rodata1)
-    /* .gnu.warning sections are handled specially by elf32.em.  */
-    *(.gnu.warning)
-  } =0
-  .kstrtab : { *(.kstrtab) }
-
-  . = ALIGN(16);		/* Exception table */
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  __start___dbe_table = .;	/* Exception table for data bus errors */
-  __dbe_table : { *(__dbe_table) }
-  __stop___dbe_table = .;
-
-  __start___ksymtab = .;	/* Kernel symbol table */
-  __ksymtab : { *(__ksymtab) }
-  __stop___ksymtab = .;
-
-  _etext = .;
-
-  . = ALIGN(8192);
-  .data.init_task : { *(.data.init_task) }
-
-  /* Startup code */
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(16);
-  __setup_start = .;
-  .setup.init : { *(.setup.init) }
-  __setup_end = .;
-  __initcall_start = .;
-  .initcall.init : { *(.initcall.init) }
-  __initcall_end = .;
-  . = ALIGN(4096);	/* Align double page for init_task_union */
-  __init_end = .;
-
-  . = ALIGN(4096);
-  .data.page_aligned : { *(.data.idt) }
-
-  . = ALIGN(32);
-  .data.cacheline_aligned : { *(.data.cacheline_aligned) }
+	/* . = VMLINUZ_LOAD_ADDRESS */
+	/* read-only */
+	_text = .;	/* Text and read-only data */
+	.text	: {
+		_ftext = . ;
+		*(.text)
+		*(.rodata)
+	} = 0
+	_etext = .;	/* End of text section */
 
-  .fini      : { *(.fini)    } =0
-  .reginfo : { *(.reginfo) }
-  /* Adjust the address for the data segment.  We want to adjust up to
-     the same address within the page on the next page up.  It would
-     be more correct to do this:
-       . = .;
-     The current expression does not correctly handle the case of a
-     text segment ending precisely at the end of a page; it causes the
-     data segment to skip a page.  The above expression does not have
-     this problem, but it will currently (2/95) cause BFD to allocate
-     a single segment, combining both text and data, for this case.
-     This will prevent the text segment from being shared among
-     multiple executions of the program; I think that is more
-     important than losing a page of the virtual address space (note
-     that no actual memory is lost; the page which is skipped can not
-     be referenced).  */
-  . = .;
-  .data    :
-  {
-    _fdata = . ;
-    *(.data)
+	/* writable */
+	.data	: {	/* Data */
+		_fdata = . ;
+		*(.data)
+		/* Put the compressed image here, so bss is on the end. */
+		__image_begin = .;
+		*(.image)
+		__image_end = .;
+		CONSTRUCTORS
+	}
+	.sdata	: { *(.sdata) }
+	. = ALIGN(4);
+	_edata  =  .;	/* End of data section */
 
-   /* Put the compressed image here, so bss is on the end. */
-   __image_begin = .;
-   *(.image)
-   __image_end = .;
-   /* Align the initial ramdisk image (INITRD) on page boundaries. */
-   . = ALIGN(4096);
-   __ramdisk_begin = .;
-   *(.initrd)
-   __ramdisk_end = .;
-   . = ALIGN(4096);
+	/* BSS */
+	__bss_start = .;
+	_fbss = .;
+	.sbss	: { *(.sbss) *(.scommon) }
+	.bss	: {
+		*(.dynbss)
+		*(.bss)
+		*(COMMON)
+	}
+	.  = ALIGN(4);
+	_end = . ;
 
-    CONSTRUCTORS
-  }
-  .data1   : { *(.data1) }
-  _gp = . + 0x8000;
-  .lit8 : { *(.lit8) }
-  .lit4 : { *(.lit4) }
-  .ctors         : { *(.ctors)   }
-  .dtors         : { *(.dtors)   }
-  .got           : { *(.got.plt) *(.got) }
-  .dynamic       : { *(.dynamic) }
-  /* We want the small data sections together, so single-instruction offsets
-     can access them all, and initialized data all before uninitialized, so
-     we can shorten the on-disk segment size.  */
-  .sdata     : { *(.sdata) }
-  . = ALIGN(4);
-  _edata  =  .;
-  PROVIDE (edata = .);
+	/* These are needed for ELF backends which have not yet been converted
+	 * to the new style linker.  */
 
-  __bss_start = .;
-  _fbss = .;
-  .sbss      : { *(.sbss) *(.scommon) }
-  .bss       :
-  {
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-   .  = ALIGN(4);
-  _end = . ;
-  PROVIDE (end = .);
-  }
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
 
-  /* Sections to be discarded */
-  /DISCARD/ :
-  {
-        *(.text.exit)
-        *(.data.exit)
-        *(.exitcall.exit)
-  }
+	/* These must appear regardless of  .  */
+	.gptab.sdata : { *(.gptab.data) *(.gptab.sdata) }
+	.gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) }
 
-  /* This is the MIPS specific mdebug section.  */
-  .mdebug : { *(.mdebug) }
-  /* These are needed for ELF backends which have not yet been
-     converted to the new style linker.  */
-  .stab 0 : { *(.stab) }
-  .stabstr 0 : { *(.stabstr) }
-  /* DWARF debug sections.
-     Symbols in the .debug DWARF section are relative to the beginning of the
-     section so we begin .debug at 0.  It's not clear yet what needs to happen
-     for the others.   */
-  .debug          0 : { *(.debug) }
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }
-  .debug_aranges  0 : { *(.debug_aranges) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-  .debug_sfnames  0 : { *(.debug_sfnames) }
-  .line           0 : { *(.line) }
-  /* These must appear regardless of  .  */
-  .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) }
-  .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) }
-  .comment : { *(.comment) }
-  .note : { *(.note) }
+	/* Sections to be discarded */
+	/DISCARD/	: {
+		*(.MIPS.options)
+		*(.options)
+		*(.pdr)
+		*(.reginfo)
+		*(.comment)
+		*(.note)
+	}
 }

arch/mips/cavium-octeon/csrc-octeon.c

@@ -50,6 +50,38 @@ static struct clocksource clocksource_mips = {
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
+unsigned long long notrace sched_clock(void)
+{
+	/* 64-bit arithmatic can overflow, so use 128-bit.  */
+#if (__GNUC__ < 4) || ((__GNUC__ == 4) && (__GNUC_MINOR__ <= 3))
+	u64 t1, t2, t3;
+	unsigned long long rv;
+	u64 mult = clocksource_mips.mult;
+	u64 shift = clocksource_mips.shift;
+	u64 cnt = read_c0_cvmcount();
+
+	asm (
+		"dmultu\t%[cnt],%[mult]\n\t"
+		"nor\t%[t1],$0,%[shift]\n\t"
+		"mfhi\t%[t2]\n\t"
+		"mflo\t%[t3]\n\t"
+		"dsll\t%[t2],%[t2],1\n\t"
+		"dsrlv\t%[rv],%[t3],%[shift]\n\t"
+		"dsllv\t%[t1],%[t2],%[t1]\n\t"
+		"or\t%[rv],%[t1],%[rv]\n\t"
+		: [rv] "=&r" (rv), [t1] "=&r" (t1), [t2] "=&r" (t2), [t3] "=&r" (t3)
+		: [cnt] "r" (cnt), [mult] "r" (mult), [shift] "r" (shift)
+		: "hi", "lo");
+	return rv;
+#else
+	/* GCC > 4.3 do it the easy way.  */
+	unsigned int __attribute__((mode(TI))) t;
+	t = read_c0_cvmcount();
+	t = t * clocksource_mips.mult;
+	return (unsigned long long)(t >> clocksource_mips.shift);
+#endif
+}
+
 void __init plat_time_init(void)
 {
 	clocksource_mips.rating = 300;

arch/mips/cobalt/setup.c

@@ -97,26 +97,18 @@ void __init plat_mem_setup(void)
 
 void __init prom_init(void)
 {
-	int narg, indx, posn, nchr;
 	unsigned long memsz;
+	int argc, i;
 	char **argv;
 
 	memsz = fw_arg0 & 0x7fff0000;
-	narg = fw_arg0 & 0x0000ffff;
-
-	if (narg) {
-		arcs_cmdline[0] = '\0';
-		argv = (char **) fw_arg1;
-		posn = 0;
-		for (indx = 1; indx < narg; ++indx) {
-			nchr = strlen(argv[indx]);
-			if (posn + 1 + nchr + 1 > sizeof(arcs_cmdline))
-				break;
-			if (posn)
-				arcs_cmdline[posn++] = ' ';
-			strcpy(arcs_cmdline + posn, argv[indx]);
-			posn += nchr;
-		}
+	argc = fw_arg0 & 0x0000ffff;
+	argv = (char **)fw_arg1;
+
+	for (i = 1; i < argc; i++) {
+		strlcat(arcs_cmdline, argv[i], COMMAND_LINE_SIZE);
+		if (i < (argc - 1))
+			strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE);
 	}
 
 	add_memory_region(0x0, memsz, BOOT_MEM_RAM);

arch/mips/include/asm/mach-ip27/topology.h

@@ -24,7 +24,9 @@ extern struct cpuinfo_ip27 sn_cpu_info[NR_CPUS];
 
 #define cpu_to_node(cpu)	(sn_cpu_info[(cpu)].p_nodeid)
 #define parent_node(node)	(node)
-#define cpumask_of_node(node)	(&hub_data(node)->h_cpus)
+#define cpumask_of_node(node)	((node) == -1 ?				\
+				 cpu_all_mask :				\
+				 &hub_data(node)->h_cpus)
 struct pci_bus;
 extern int pcibus_to_node(struct pci_bus *);
 

arch/mips/mipssim/sim_setup.c

@@ -49,9 +49,6 @@ void __init plat_mem_setup(void)
 	set_io_port_base(0xbfd00000);
 
 	serial_init();
-
-	pr_info("Linux started...\n");
-
 }
 
 extern struct plat_smp_ops ssmtc_smp_ops;
@@ -60,7 +57,6 @@ void __init prom_init(void)
 {
 	set_io_port_base(0xbfd00000);
 
-	pr_info("\nLINUX started...\n");
 	prom_meminit();
 
 #ifdef CONFIG_MIPS_MT_SMP

arch/mips/mm/tlbex.c

@@ -73,9 +73,6 @@ static int __cpuinit m4kc_tlbp_war(void)
 enum label_id {
 	label_second_part = 1,
 	label_leave,
-#ifdef MODULE_START
-	label_module_alloc,
-#endif
 	label_vmalloc,
 	label_vmalloc_done,
 	label_tlbw_hazard,
@@ -92,9 +89,6 @@ enum label_id {
 
 UASM_L_LA(_second_part)
 UASM_L_LA(_leave)
-#ifdef MODULE_START
-UASM_L_LA(_module_alloc)
-#endif
 UASM_L_LA(_vmalloc)
 UASM_L_LA(_vmalloc_done)
 UASM_L_LA(_tlbw_hazard)
@@ -818,8 +812,6 @@ static void __cpuinit build_r4000_tlb_refill_handler(void)
 	} else {
 #if defined(CONFIG_HUGETLB_PAGE)
 		const enum label_id ls = label_tlb_huge_update;
-#elif defined(MODULE_START)
-		const enum label_id ls = label_module_alloc;
 #else
 		const enum label_id ls = label_vmalloc;
 #endif

arch/mips/mti-malta/malta-init.c

@@ -355,7 +355,6 @@ void __init prom_init(void)
 	board_nmi_handler_setup = mips_nmi_setup;
 	board_ejtag_handler_setup = mips_ejtag_setup;
 
-	pr_info("\nLINUX started...\n");
 	prom_init_cmdline();
 	prom_meminit();
 #ifdef CONFIG_SERIAL_8250_CONSOLE

arch/mips/powertv/Makefile

@@ -23,6 +23,6 @@
 # under Linux.
 #
 
-obj-y += cmdline.o init.o memory.o reset.o time.o powertv_setup.o asic/ pci/
+obj-y += init.o memory.o reset.o time.o powertv_setup.o asic/ pci/
 
 EXTRA_CFLAGS += -Wall -Werror

arch/mips/powertv/cmdline.c

@@ -1,52 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
- * Portions copyright (C) 2009 Cisco Systems, Inc.
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Kernel command line creation using the prom monitor (YAMON) argc/argv.
- */
-#include <linux/init.h>
-#include <linux/string.h>
-
-#include <asm/bootinfo.h>
-
-#include "init.h"
-
-/*
- * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer.
- * This macro take care of sign extension.
- */
-#define prom_argv(index) ((char *)(long)_prom_argv[(index)])
-
-char * __init prom_getcmdline(void)
-{
-	return &(arcs_cmdline[0]);
-}
-
-void  __init prom_init_cmdline(void)
-{
-	int len;
-
-	if (prom_argc != 1)
-		return;
-
-	len = strlen(arcs_cmdline);
-
-	arcs_cmdline[len] = ' ';
-
-	strlcpy(arcs_cmdline + len + 1, (char *)_prom_argv,
-		COMMAND_LINE_SIZE - len - 1);
-}

arch/mips/powertv/init.c

@@ -34,10 +34,7 @@
 #include <asm/mips-boards/generic.h>
 #include <asm/mach-powertv/asic.h>
 
-#include "init.h"
-
-int prom_argc;
-int *_prom_argv, *_prom_envp;
+static int *_prom_envp;
 unsigned long _prom_memsize;
 
 /*
@@ -109,16 +106,20 @@ static void __init mips_ejtag_setup(void)
 
 void __init prom_init(void)
 {
+	int prom_argc;
+	char *prom_argv;
+
 	prom_argc = fw_arg0;
-	_prom_argv = (int *) fw_arg1;
+	prom_argv = (char *) fw_arg1;
 	_prom_envp = (int *) fw_arg2;
 	_prom_memsize = (unsigned long) fw_arg3;
 
 	board_nmi_handler_setup = mips_nmi_setup;
 	board_ejtag_handler_setup = mips_ejtag_setup;
 
-	pr_info("\nLINUX started...\n");
-	prom_init_cmdline();
+	if (prom_argc == 1)
+		strlcat(arcs_cmdline, prom_argv, COMMAND_LINE_SIZE);
+
 	configure_platform();
 	prom_meminit();
 

arch/mips/powertv/init.h

@@ -22,7 +22,5 @@
 
 #ifndef _POWERTV_INIT_H
 #define _POWERTV_INIT_H
-extern int prom_argc;
-extern int *_prom_argv;
 extern unsigned long _prom_memsize;
 #endif

arch/mips/powertv/memory.c

@@ -42,8 +42,6 @@
 #define BOOT_MEM_SIZE		KIBIBYTE(256)	/* Memory reserved for bldr */
 #define PHYS_MEM_START		0x10000000	/* Start of physical memory */
 
-unsigned long ptv_memsize;
-
 char __initdata cmdline[COMMAND_LINE_SIZE];
 
 void __init prom_meminit(void)
@@ -87,9 +85,6 @@ void __init prom_meminit(void)
 		}
 	}
 
-	/* Store memsize for diagnostic purposes */
-	ptv_memsize = memsize;
-
 	physend = PFN_ALIGN(&_end) - 0x80000000;
 	if (memsize > LOW_MEM_MAX) {
 		low_mem = LOW_MEM_MAX;

arch/mips/powertv/powertv_setup.c

@@ -64,9 +64,6 @@
 #define REG_SIZE	"4"		/* In bytes */
 #endif
 
-static struct pt_regs die_regs;
-static bool have_die_regs;
-
 static void register_panic_notifier(void);
 static int panic_handler(struct notifier_block *notifier_block,
 	unsigned long event, void *cause_string);
@@ -218,24 +215,6 @@ static int panic_handler(struct notifier_block *notifier_block,
 	return NOTIFY_DONE;
 }
 
-/**
- * Platform-specific handling of oops
- * @str:	Pointer to the oops string
- * @regs:	Pointer to the oops registers
- * All we do here is to save the registers for subsequent printing through
- * the panic notifier.
- */
-void platform_die(const char *str, const struct pt_regs *regs)
-{
-	/* If we already have saved registers, don't overwrite them as they
-	 * they apply to the initial fault */
-
-	if (!have_die_regs) {
-		have_die_regs = true;
-		die_regs = *regs;
-	}
-}
-
 /* Information about the RF MAC address, if one was supplied on the
  * command line. */
 static bool have_rfmac;

arch/mips/powertv/reset.c

@@ -28,9 +28,6 @@
 #include <asm/mach-powertv/asic_regs.h>
 #include "reset.h"
 
-static void mips_machine_restart(char *command);
-static void mips_machine_halt(void);
-
 static void mips_machine_restart(char *command)
 {
 #ifdef CONFIG_BOOTLOADER_DRIVER
@@ -44,22 +41,7 @@ static void mips_machine_restart(char *command)
 #endif
 }
 
-static void mips_machine_halt(void)
-{
-#ifdef CONFIG_BOOTLOADER_DRIVER
-	/*
-	 * Call the bootloader's reset function to ensure
-	 * that persistent data is flushed before hard reset
-	 */
-	kbldr_SetCauseAndReset();
-#else
-	writel(0x1, asic_reg_addr(watchdog));
-#endif
-}
-
 void mips_reboot_setup(void)
 {
 	_machine_restart = mips_machine_restart;
-	_machine_halt = mips_machine_halt;
-	pm_power_off = mips_machine_halt;
 }

arch/mips/powertv/time.c

@@ -33,5 +33,4 @@ unsigned int __cpuinit get_c0_compare_int(void)
 void __init plat_time_init(void)
 {
 	powertv_clocksource_init();
-	r4k_clockevent_init();
 }

arch/mips/txx9/generic/setup.c

@@ -160,7 +160,6 @@ static void __init prom_init_cmdline(void)
 	int argc;
 	int *argv32;
 	int i;			/* Always ignore the "-c" at argv[0] */
-	static char builtin[COMMAND_LINE_SIZE] __initdata;
 
 	if (fw_arg0 >= CKSEG0 || fw_arg1 < CKSEG0) {
 		/*
@@ -174,20 +173,6 @@ static void __init prom_init_cmdline(void)
 		argv32 = (int *)fw_arg1;
 	}
 
-	/* ignore all built-in args if any f/w args given */
-	/*
-	 * But if built-in strings was started with '+', append them
-	 * to command line args.  If built-in was started with '-',
-	 * ignore all f/w args.
-	 */
-	builtin[0] = '\0';
-	if (arcs_cmdline[0] == '+')
-		strcpy(builtin, arcs_cmdline + 1);
-	else if (arcs_cmdline[0] == '-') {
-		strcpy(builtin, arcs_cmdline + 1);
-		argc = 0;
-	} else if (argc <= 1)
-		strcpy(builtin, arcs_cmdline);
 	arcs_cmdline[0] = '\0';
 
 	for (i = 1; i < argc; i++) {
@@ -201,12 +186,6 @@ static void __init prom_init_cmdline(void)
 		} else
 			strcat(arcs_cmdline, str);
 	}
-	/* append saved builtin args */
-	if (builtin[0]) {
-		if (arcs_cmdline[0])
-			strcat(arcs_cmdline, " ");
-		strcat(arcs_cmdline, builtin);
-	}
 }
 
 static int txx9_ic_disable __initdata;

arch/mips/vr41xx/common/init.c

@@ -1,7 +1,7 @@
 /*
  *  init.c, Common initialization routines for NEC VR4100 series.
  *
- *  Copyright (C) 2003-2008  Yoichi Yuasa <yuasa@linux-mips.org>
+ *  Copyright (C) 2003-2009  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -66,9 +66,9 @@ void __init prom_init(void)
 	argv = (char **)fw_arg1;
 
 	for (i = 1; i < argc; i++) {
-		strcat(arcs_cmdline, argv[i]);
+		strlcat(arcs_cmdline, argv[i], COMMAND_LINE_SIZE);
 		if (i < (argc - 1))
-			strcat(arcs_cmdline, " ");
+			strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE);
 	}
 }
 

arch/powerpc/boot/Makefile

@@ -20,7 +20,7 @@
 all: $(obj)/zImage
 
 BOOTCFLAGS    := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
-		 -fno-strict-aliasing -Os -msoft-float -pipe -D__KERNEL__\
+		 -fno-strict-aliasing -Os -msoft-float -pipe \
 		 -fomit-frame-pointer -fno-builtin -fPIC -nostdinc \
 		 -isystem $(shell $(CROSS32CC) -print-file-name=include)
 BOOTAFLAGS	:= -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional -nostdinc
@@ -34,8 +34,6 @@ BOOTCFLAGS	+= -fno-stack-protector
 endif
 
 BOOTCFLAGS	+= -I$(obj) -I$(srctree)/$(obj)
-BOOTCFLAGS	+= -include include/linux/autoconf.h -Iarch/powerpc/include
-BOOTCFLAGS	+= -Iinclude
 
 DTS_FLAGS	?= -p 1024
 

arch/s390/include/asm/bug.h

@@ -52,6 +52,10 @@
 	unreachable();					\
 } while (0)
 
+#define __WARN() do {					\
+	__EMIT_BUG(BUGFLAG_WARNING);			\
+} while (0)
+
 #define WARN_ON(x) ({					\
 	int __ret_warn_on = !!(x);			\
 	if (__builtin_constant_p(__ret_warn_on)) {	\

arch/s390/include/asm/sigp.h

@@ -15,11 +15,19 @@
 #ifndef __SIGP__
 #define __SIGP__
 
-#include <asm/ptrace.h>
-#include <asm/atomic.h>
+#include <asm/system.h>
 
 /* get real cpu address from logical cpu number */
-extern volatile int __cpu_logical_map[];
+extern int __cpu_logical_map[];
+
+static inline int cpu_logical_map(int cpu)
+{
+#ifdef CONFIG_SMP
+	return __cpu_logical_map[cpu];
+#else
+	return stap();
+#endif
+}
 
 typedef enum
 {
@@ -79,7 +87,7 @@ signal_processor(__u16 cpu_addr, sigp_order_code order_code)
 		"	ipm	%0\n"
 		"	srl	%0,28\n"
 		:	"=d"	(ccode)
-		: "d" (reg1), "d" (__cpu_logical_map[cpu_addr]),
+		: "d" (reg1), "d" (cpu_logical_map(cpu_addr)),
 		  "a" (order_code) : "cc" , "memory");
 	return ccode;
 }
@@ -98,7 +106,7 @@ signal_processor_p(__u32 parameter, __u16 cpu_addr, sigp_order_code order_code)
 		"	ipm	%0\n"
 		"	srl	%0,28\n"
 		: "=d" (ccode)
-		: "d" (reg1), "d" (__cpu_logical_map[cpu_addr]),
+		: "d" (reg1), "d" (cpu_logical_map(cpu_addr)),
 		  "a" (order_code) : "cc" , "memory");
 	return ccode;
 }
@@ -118,7 +126,7 @@ signal_processor_ps(__u32 *statusptr, __u32 parameter, __u16 cpu_addr,
 		"	ipm	%0\n"
 		"	srl	%0,28\n"
 		: "=d" (ccode), "+d" (reg1)
-		: "d" (__cpu_logical_map[cpu_addr]), "a" (order_code)
+		: "d" (cpu_logical_map(cpu_addr)), "a" (order_code)
 		: "cc" , "memory");
 	*statusptr = reg1;
 	return ccode;

arch/s390/include/asm/thread_info.h

@@ -93,13 +93,12 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_SYSCALL_AUDIT	9	/* syscall auditing active */
 #define TIF_SECCOMP		10	/* secure computing */
 #define TIF_SYSCALL_TRACEPOINT	11	/* syscall tracepoint instrumentation */
-#define TIF_USEDFPU		16	/* FPU was used by this task this quantum (SMP) */
-#define TIF_POLLING_NRFLAG	17	/* true if poll_idle() is polling 
+#define TIF_POLLING_NRFLAG	16	/* true if poll_idle() is polling
 					   TIF_NEED_RESCHED */
-#define TIF_31BIT		18	/* 32bit process */ 
-#define TIF_MEMDIE		19
-#define TIF_RESTORE_SIGMASK	20	/* restore signal mask in do_signal() */
-#define TIF_FREEZE		21	/* thread is freezing for suspend */
+#define TIF_31BIT		17	/* 32bit process */
+#define TIF_MEMDIE		18
+#define TIF_RESTORE_SIGMASK	19	/* restore signal mask in do_signal() */
+#define TIF_FREEZE		20	/* thread is freezing for suspend */
 
 #define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
 #define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
@@ -112,7 +111,6 @@ static inline struct thread_info *current_thread_info(void)
 #define _TIF_SYSCALL_AUDIT	(1<<TIF_SYSCALL_AUDIT)
 #define _TIF_SECCOMP		(1<<TIF_SECCOMP)
 #define _TIF_SYSCALL_TRACEPOINT	(1<<TIF_SYSCALL_TRACEPOINT)
-#define _TIF_USEDFPU		(1<<TIF_USEDFPU)
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
 #define _TIF_31BIT		(1<<TIF_31BIT)
 #define _TIF_FREEZE		(1<<TIF_FREEZE)

arch/s390/include/asm/unistd.h

@@ -269,8 +269,7 @@
 #define	__NR_pwritev		329
 #define __NR_rt_tgsigqueueinfo	330
 #define __NR_perf_event_open	331
-#define __NR_recvmmsg		332
-#define NR_syscalls 333
+#define NR_syscalls 332
 
 /* 
  * There are some system calls that are not present on 64 bit, some
@@ -377,6 +376,9 @@
 #define __IGNORE_migrate_pages
 #define __IGNORE_move_pages
 
+/* Ignore system calls that are also reachable via sys_socket */
+#define __IGNORE_recvmmsg
+
 #define __ARCH_WANT_IPC_PARSE_VERSION
 #define __ARCH_WANT_OLD_READDIR
 #define __ARCH_WANT_SYS_ALARM

arch/s390/kernel/compat_linux.c

@@ -616,44 +616,35 @@ asmlinkage long sys32_fstatat64(unsigned int dfd, char __user *filename,
  */
 
 struct mmap_arg_struct_emu31 {
-	u32	addr;
-	u32	len;
-	u32	prot;
-	u32	flags;
-	u32	fd;
-	u32	offset;
+	compat_ulong_t addr;
+	compat_ulong_t len;
+	compat_ulong_t prot;
+	compat_ulong_t flags;
+	compat_ulong_t fd;
+	compat_ulong_t offset;
 };
 
-asmlinkage unsigned long
-old32_mmap(struct mmap_arg_struct_emu31 __user *arg)
+asmlinkage unsigned long old32_mmap(struct mmap_arg_struct_emu31 __user *arg)
 {
 	struct mmap_arg_struct_emu31 a;
-	int error = -EFAULT;
 
 	if (copy_from_user(&a, arg, sizeof(a)))
-		goto out;
-
-	error = -EINVAL;
+		return -EFAULT;
 	if (a.offset & ~PAGE_MASK)
-		goto out;
-
-	error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd,
-			       a.offset >> PAGE_SHIFT);
-out:
-	return error;
+		return -EINVAL;
+	a.addr = (unsigned long) compat_ptr(a.addr);
+	return sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd,
+			      a.offset >> PAGE_SHIFT);
 }
 
-asmlinkage long 
-sys32_mmap2(struct mmap_arg_struct_emu31 __user *arg)
+asmlinkage long sys32_mmap2(struct mmap_arg_struct_emu31 __user *arg)
 {
 	struct mmap_arg_struct_emu31 a;
-	int error = -EFAULT;
 
 	if (copy_from_user(&a, arg, sizeof(a)))
-		goto out;
-	error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, a.offset);
-out:
-	return error;
+		return -EFAULT;
+	a.addr = (unsigned long) compat_ptr(a.addr);
+	return sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, a.offset);
 }
 
 asmlinkage long sys32_read(unsigned int fd, char __user * buf, size_t count)

arch/s390/kernel/compat_wrapper.S

@@ -1853,12 +1853,3 @@ sys32_execve_wrapper:
 	llgtr	%r3,%r3			# compat_uptr_t *
 	llgtr	%r4,%r4			# compat_uptr_t *
 	jg	sys32_execve		# branch to system call
-
-	.globl	compat_sys_recvmmsg_wrapper
-compat_sys_recvmmsg_wrapper:
-	lgfr	%r2,%r2			# int
-	llgtr	%r3,%r3			# struct compat_mmsghdr *
-	llgfr	%r4,%r4			# unsigned int
-	llgfr	%r5,%r5			# unsigned int
-	llgtr	%r6,%r6			# struct compat_timespec *
-	jg	compat_sys_recvmmsg

arch/s390/kernel/process.c

@@ -153,8 +153,6 @@ void exit_thread(void)
 
 void flush_thread(void)
 {
-	clear_used_math();
-	clear_tsk_thread_flag(current, TIF_USEDFPU);
 }
 
 void release_thread(struct task_struct *dead_task)
@@ -217,6 +215,7 @@ int copy_thread(unsigned long clone_flags, unsigned long new_stackp,
 	p->thread.mm_segment = get_fs();
 	/* Don't copy debug registers */
 	memset(&p->thread.per_info, 0, sizeof(p->thread.per_info));
+	clear_tsk_thread_flag(p, TIF_SINGLE_STEP);
 	/* Initialize per thread user and system timer values */
 	ti = task_thread_info(p);
 	ti->user_timer = 0;

arch/s390/kernel/ptrace.c

@@ -65,6 +65,7 @@ FixPerRegisters(struct task_struct *task)
 {
 	struct pt_regs *regs;
 	per_struct *per_info;
+	per_cr_words cr_words;
 
 	regs = task_pt_regs(task);
 	per_info = (per_struct *) &task->thread.per_info;
@@ -98,6 +99,13 @@ FixPerRegisters(struct task_struct *task)
 		per_info->control_regs.bits.storage_alt_space_ctl = 1;
 	else
 		per_info->control_regs.bits.storage_alt_space_ctl = 0;
+
+	if (task == current) {
+		__ctl_store(cr_words, 9, 11);
+		if (memcmp(&cr_words, &per_info->control_regs.words,
+			   sizeof(cr_words)) != 0)
+			__ctl_load(per_info->control_regs.words, 9, 11);
+	}
 }
 
 void user_enable_single_step(struct task_struct *task)

arch/s390/kernel/setup.c

@@ -87,7 +87,6 @@ unsigned long elf_hwcap = 0;
 char elf_platform[ELF_PLATFORM_SIZE];
 
 struct mem_chunk __initdata memory_chunk[MEMORY_CHUNKS];
-volatile int __cpu_logical_map[NR_CPUS]; /* logical cpu to cpu address */
 
 int __initdata memory_end_set;
 unsigned long __initdata memory_end;
@@ -124,12 +123,6 @@ void __cpuinit cpu_init(void)
          */
 	get_cpu_id(&S390_lowcore.cpu_id);
 
-        /*
-         * Force FPU initialization:
-         */
-        clear_thread_flag(TIF_USEDFPU);
-        clear_used_math();
-
 	atomic_inc(&init_mm.mm_count);
 	current->active_mm = &init_mm;
 	BUG_ON(current->mm);
@@ -855,7 +848,6 @@ setup_arch(char **cmdline_p)
 	setup_lowcore();
 
         cpu_init();
-	__cpu_logical_map[0] = stap();
 	s390_init_cpu_topology();
 
 	/*

arch/s390/kernel/signal.c

@@ -499,19 +499,11 @@ void do_signal(struct pt_regs *regs)
 			if (test_thread_flag(TIF_RESTORE_SIGMASK))
 				clear_thread_flag(TIF_RESTORE_SIGMASK);
 
-			/*
-			 * If we would have taken a single-step trap
-			 * for a normal instruction, act like we took
-			 * one for the handler setup.
-			 */
-			if (current->thread.per_info.single_step)
-				set_thread_flag(TIF_SINGLE_STEP);
-
 			/*
 			 * Let tracing know that we've done the handler setup.
 			 */
 			tracehook_signal_handler(signr, &info, &ka, regs,
-					 test_thread_flag(TIF_SINGLE_STEP));
+					current->thread.per_info.single_step);
 		}
 		return;
 	}

arch/s390/kernel/smp.c

@@ -52,6 +52,9 @@
 #include <asm/cpu.h>
 #include "entry.h"
 
+/* logical cpu to cpu address */
+int __cpu_logical_map[NR_CPUS];
+
 static struct task_struct *current_set[NR_CPUS];
 
 static u8 smp_cpu_type;
@@ -717,6 +720,12 @@ void __init smp_cpus_done(unsigned int max_cpus)
 {
 }
 
+void __init smp_setup_processor_id(void)
+{
+	S390_lowcore.cpu_nr = 0;
+	__cpu_logical_map[0] = stap();
+}
+
 /*
  * the frequency of the profiling timer can be changed
  * by writing a multiplier value into /proc/profile.

arch/s390/kernel/syscalls.S

@@ -340,4 +340,3 @@ SYSCALL(sys_preadv,sys_preadv,compat_sys_preadv_wrapper)
 SYSCALL(sys_pwritev,sys_pwritev,compat_sys_pwritev_wrapper)
 SYSCALL(sys_rt_tgsigqueueinfo,sys_rt_tgsigqueueinfo,compat_sys_rt_tgsigqueueinfo_wrapper) /* 330 */
 SYSCALL(sys_perf_event_open,sys_perf_event_open,sys_perf_event_open_wrapper)
-SYSCALL(sys_recvmmsg,sys_recvmmsg,compat_sys_recvmmsg_wrapper)

arch/s390/kernel/topology.c

@@ -114,7 +114,7 @@ static void add_cpus_to_core(struct tl_cpu *tl_cpu, struct core_info *core)
 
 		rcpu = CPU_BITS - 1 - cpu + tl_cpu->origin;
 		for_each_present_cpu(lcpu) {
-			if (__cpu_logical_map[lcpu] == rcpu) {
+			if (cpu_logical_map(lcpu) == rcpu) {
 				cpu_set(lcpu, core->mask);
 				smp_cpu_polarization[lcpu] = tl_cpu->pp;
 			}

arch/s390/lib/spinlock.c

@@ -34,7 +34,7 @@ static inline void _raw_yield_cpu(int cpu)
 {
 	if (MACHINE_HAS_DIAG9C)
 		asm volatile("diag %0,0,0x9c"
-			     : : "d" (__cpu_logical_map[cpu]));
+			     : : "d" (cpu_logical_map(cpu)));
 	else
 		_raw_yield();
 }

arch/s390/mm/mmap.c

@@ -40,7 +40,7 @@
 
 static inline unsigned long mmap_base(void)
 {
-	unsigned long gap = current->signal->rlim[RLIMIT_STACK].rlim_cur;
+	unsigned long gap = rlimit(RLIMIT_STACK);
 
 	if (gap < MIN_GAP)
 		gap = MIN_GAP;
@@ -61,7 +61,7 @@ static inline int mmap_is_legacy(void)
 #endif
 	return sysctl_legacy_va_layout ||
 	    (current->personality & ADDR_COMPAT_LAYOUT) ||
-	    current->signal->rlim[RLIMIT_STACK].rlim_cur == RLIM_INFINITY;
+	    rlimit(RLIMIT_STACK) == RLIM_INFINITY;
 }
 
 #ifndef CONFIG_64BIT

arch/sh/boards/mach-ecovec24/setup.c

@@ -351,6 +351,10 @@ static struct i2c_board_info i2c1_devices[] = {
 	{
 		I2C_BOARD_INFO("r2025sd", 0x32),
 	},
+	{
+		I2C_BOARD_INFO("lis3lv02d", 0x1c),
+		.irq = 33,
+	}
 };
 
 /* KEYSC */
@@ -1113,6 +1117,10 @@ static int __init arch_setup(void)
 	gpio_direction_output(GPIO_PTU0, 0);
 	mdelay(20);
 
+	/* enable motion sensor */
+	gpio_request(GPIO_FN_INTC_IRQ1, NULL);
+	gpio_direction_input(GPIO_FN_INTC_IRQ1);
+
 	/* enable I2C device */
 	i2c_register_board_info(0, i2c0_devices,
 				ARRAY_SIZE(i2c0_devices));

arch/sh/tools/Makefile

@@ -13,4 +13,4 @@
 include/generated/machtypes.h: $(src)/gen-mach-types $(src)/mach-types
 	@echo '  Generating $@'
 	$(Q)mkdir -p $(dir $@)
-	$(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; }
+	$(Q)LC_ALL=C $(AWK) -f $^ > $@ || { rm -f $@; /bin/false; }

arch/um/drivers/mconsole_kern.c

@@ -125,50 +125,36 @@ void mconsole_log(struct mc_request *req)
 void mconsole_proc(struct mc_request *req)
 {
 	struct nameidata nd;
-	struct file_system_type *proc;
-	struct super_block *super;
+	struct vfsmount *mnt = current->nsproxy->pid_ns->proc_mnt;
 	struct file *file;
 	int n, err;
 	char *ptr = req->request.data, *buf;
+	mm_segment_t old_fs = get_fs();
 
 	ptr += strlen("proc");
 	ptr = skip_spaces(ptr);
 
-	proc = get_fs_type("proc");
-	if (proc == NULL) {
-		mconsole_reply(req, "procfs not registered", 1, 0);
+	err = vfs_path_lookup(mnt->mnt_root, mnt, ptr, LOOKUP_FOLLOW, &nd);
+	if (err) {
+		mconsole_reply(req, "Failed to look up file", 1, 0);
 		goto out;
 	}
 
-	super = (*proc->get_sb)(proc, 0, NULL, NULL);
-	put_filesystem(proc);
-	if (super == NULL) {
-		mconsole_reply(req, "Failed to get procfs superblock", 1, 0);
+	err = may_open(&nd.path, MAY_READ, FMODE_READ);
+	if (result) {
+		mconsole_reply(req, "Failed to open file", 1, 0);
+		path_put(&nd.path);
 		goto out;
 	}
-	up_write(&super->s_umount);
-
-	nd.path.dentry = super->s_root;
-	nd.path.mnt = NULL;
-	nd.flags = O_RDONLY + 1;
-	nd.last_type = LAST_ROOT;
-
-	/* START: it was experienced that the stability problems are closed
-	 * if commenting out these two calls + the below read cycle. To
-	 * make UML crash again, it was enough to readd either one.*/
-	err = link_path_walk(ptr, &nd);
-	if (err) {
-		mconsole_reply(req, "Failed to look up file", 1, 0);
-		goto out_kill;
-	}
 
 	file = dentry_open(nd.path.dentry, nd.path.mnt, O_RDONLY,
 			   current_cred());
+	err = PTR_ERR(file);
 	if (IS_ERR(file)) {
 		mconsole_reply(req, "Failed to open file", 1, 0);
-		goto out_kill;
+		path_put(&nd.path);
+		goto out;
 	}
-	/*END*/
 
 	buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
 	if (buf == NULL) {
@@ -176,10 +162,13 @@ void mconsole_proc(struct mc_request *req)
 		goto out_fput;
 	}
 
-	if ((file->f_op != NULL) && (file->f_op->read != NULL)) {
+	if (file->f_op->read) {
 		do {
-			n = (*file->f_op->read)(file, buf, PAGE_SIZE - 1,
-						&file->f_pos);
+			loff_t pos;
+			set_fs(KERNEL_DS);
+			n = vfs_read(file, buf, PAGE_SIZE - 1, &pos);
+			file_pos_write(file, pos);
+			set_fs(old_fs);
 			if (n >= 0) {
 				buf[n] = '\0';
 				mconsole_reply(req, buf, 0, (n > 0));
@@ -197,8 +186,6 @@ void mconsole_proc(struct mc_request *req)
 	kfree(buf);
  out_fput:
 	fput(file);
- out_kill:
-	deactivate_super(super);
  out: ;
 }
 #endif

arch/x86/include/asm/mce.h

@@ -108,10 +108,11 @@ struct mce_log {
 #define K8_MCE_THRESHOLD_BANK_5    (MCE_THRESHOLD_BASE + 5 * 9)
 #define K8_MCE_THRESHOLD_DRAM_ECC  (MCE_THRESHOLD_BANK_4 + 0)
 
-extern struct atomic_notifier_head x86_mce_decoder_chain;
 
 #ifdef __KERNEL__
 
+extern struct atomic_notifier_head x86_mce_decoder_chain;
+
 #include <linux/percpu.h>
 #include <linux/init.h>
 #include <asm/atomic.h>

arch/x86/include/asm/uv/uv_hub.h

@@ -495,5 +495,17 @@ static inline void uv_hub_send_ipi(int pnode, int apicid, int vector)
 	uv_write_global_mmr64(pnode, UVH_IPI_INT, val);
 }
 
+/*
+ * Get the minimum revision number of the hub chips within the partition.
+ *     1 - initial rev 1.0 silicon
+ *     2 - rev 2.0 production silicon
+ */
+static inline int uv_get_min_hub_revision_id(void)
+{
+	extern int uv_min_hub_revision_id;
+
+	return uv_min_hub_revision_id;
+}
+
 #endif /* CONFIG_X86_64 */
 #endif /* _ASM_X86_UV_UV_HUB_H */

arch/x86/kernel/aperture_64.c

@@ -31,6 +31,7 @@
 #include <asm/x86_init.h>
 
 int gart_iommu_aperture;
+EXPORT_SYMBOL_GPL(gart_iommu_aperture);
 int gart_iommu_aperture_disabled __initdata;
 int gart_iommu_aperture_allowed __initdata;
 

arch/x86/kernel/apic/x2apic_uv_x.c

@@ -36,6 +36,8 @@ DEFINE_PER_CPU(int, x2apic_extra_bits);
 
 static enum uv_system_type uv_system_type;
 static u64 gru_start_paddr, gru_end_paddr;
+int uv_min_hub_revision_id;
+EXPORT_SYMBOL_GPL(uv_min_hub_revision_id);
 
 static inline bool is_GRU_range(u64 start, u64 end)
 {
@@ -55,12 +57,19 @@ static int early_get_nodeid(void)
 	mmr = early_ioremap(UV_LOCAL_MMR_BASE | UVH_NODE_ID, sizeof(*mmr));
 	node_id.v = *mmr;
 	early_iounmap(mmr, sizeof(*mmr));
+
+	/* Currently, all blades have same revision number */
+	uv_min_hub_revision_id = node_id.s.revision;
+
 	return node_id.s.node_id;
 }
 
 static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
+	int nodeid;
+
 	if (!strcmp(oem_id, "SGI")) {
+		nodeid = early_get_nodeid();
 		x86_platform.is_untracked_pat_range =  uv_is_untracked_pat_range;
 		if (!strcmp(oem_table_id, "UVL"))
 			uv_system_type = UV_LEGACY_APIC;
@@ -68,7 +77,7 @@ static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 			uv_system_type = UV_X2APIC;
 		else if (!strcmp(oem_table_id, "UVH")) {
 			__get_cpu_var(x2apic_extra_bits) =
-				early_get_nodeid() << (UV_APIC_PNODE_SHIFT - 1);
+				nodeid << (UV_APIC_PNODE_SHIFT - 1);
 			uv_system_type = UV_NON_UNIQUE_APIC;
 			return 1;
 		}
@@ -374,13 +383,13 @@ static __init void get_lowmem_redirect(unsigned long *base, unsigned long *size)
 
 enum map_type {map_wb, map_uc};
 
-static __init void map_high(char *id, unsigned long base, int shift,
-			    int max_pnode, enum map_type map_type)
+static __init void map_high(char *id, unsigned long base, int pshift,
+			int bshift, int max_pnode, enum map_type map_type)
 {
 	unsigned long bytes, paddr;
 
-	paddr = base << shift;
-	bytes = (1UL << shift) * (max_pnode + 1);
+	paddr = base << pshift;
+	bytes = (1UL << bshift) * (max_pnode + 1);
 	printk(KERN_INFO "UV: Map %s_HI 0x%lx - 0x%lx\n", id, paddr,
 						paddr + bytes);
 	if (map_type == map_uc)
@@ -396,7 +405,7 @@ static __init void map_gru_high(int max_pnode)
 
 	gru.v = uv_read_local_mmr(UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR);
 	if (gru.s.enable) {
-		map_high("GRU", gru.s.base, shift, max_pnode, map_wb);
+		map_high("GRU", gru.s.base, shift, shift, max_pnode, map_wb);
 		gru_start_paddr = ((u64)gru.s.base << shift);
 		gru_end_paddr = gru_start_paddr + (1UL << shift) * (max_pnode + 1);
 
@@ -410,7 +419,7 @@ static __init void map_mmr_high(int max_pnode)
 
 	mmr.v = uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR);
 	if (mmr.s.enable)
-		map_high("MMR", mmr.s.base, shift, max_pnode, map_uc);
+		map_high("MMR", mmr.s.base, shift, shift, max_pnode, map_uc);
 }
 
 static __init void map_mmioh_high(int max_pnode)
@@ -420,7 +429,8 @@ static __init void map_mmioh_high(int max_pnode)
 
 	mmioh.v = uv_read_local_mmr(UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR);
 	if (mmioh.s.enable)
-		map_high("MMIOH", mmioh.s.base, shift, max_pnode, map_uc);
+		map_high("MMIOH", mmioh.s.base, shift, mmioh.s.m_io,
+			max_pnode, map_uc);
 }
 
 static __init void map_low_mmrs(void)

arch/x86/kernel/dumpstack.c

@@ -123,13 +123,15 @@ print_context_stack_bp(struct thread_info *tinfo,
 	while (valid_stack_ptr(tinfo, ret_addr, sizeof(*ret_addr), end)) {
 		unsigned long addr = *ret_addr;
 
-		if (__kernel_text_address(addr)) {
-			ops->address(data, addr, 1);
-			frame = frame->next_frame;
-			ret_addr = &frame->return_address;
-			print_ftrace_graph_addr(addr, data, ops, tinfo, graph);
-		}
+		if (!__kernel_text_address(addr))
+			break;
+
+		ops->address(data, addr, 1);
+		frame = frame->next_frame;
+		ret_addr = &frame->return_address;
+		print_ftrace_graph_addr(addr, data, ops, tinfo, graph);
 	}
+
 	return (unsigned long)frame;
 }
 EXPORT_SYMBOL_GPL(print_context_stack_bp);

arch/x86/kernel/process.c

@@ -288,6 +288,8 @@ int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
 	regs.es = __USER_DS;
 	regs.fs = __KERNEL_PERCPU;
 	regs.gs = __KERNEL_STACK_CANARY;
+#else
+	regs.ss = __KERNEL_DS;
 #endif
 
 	regs.orig_ax = -1;

arch/x86/xen/enlighten.c

@@ -1151,9 +1151,13 @@ asmlinkage void __init xen_start_kernel(void)
 
 	/* keep using Xen gdt for now; no urgent need to change it */
 
+#ifdef CONFIG_X86_32
 	pv_info.kernel_rpl = 1;
 	if (xen_feature(XENFEAT_supervisor_mode_kernel))
 		pv_info.kernel_rpl = 0;
+#else
+	pv_info.kernel_rpl = 0;
+#endif
 
 	/* set the limit of our address space */
 	xen_reserve_top();

drivers/ata/ata_piix.c

@@ -329,7 +329,7 @@ static struct ata_port_operations ich_pata_ops = {
 };
 
 static struct ata_port_operations piix_sata_ops = {
-	.inherits		= &ata_bmdma_port_ops,
+	.inherits		= &ata_bmdma32_port_ops,
 };
 
 static struct ata_port_operations piix_sidpr_sata_ops = {

drivers/ata/libata-core.c

@@ -3790,21 +3790,45 @@ int sata_link_debounce(struct ata_link *link, const unsigned long *params,
 int sata_link_resume(struct ata_link *link, const unsigned long *params,
 		     unsigned long deadline)
 {
+	int tries = ATA_LINK_RESUME_TRIES;
 	u32 scontrol, serror;
 	int rc;
 
 	if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
 		return rc;
 
-	scontrol = (scontrol & 0x0f0) | 0x300;
+	/*
+	 * Writes to SControl sometimes get ignored under certain
+	 * controllers (ata_piix SIDPR).  Make sure DET actually is
+	 * cleared.
+	 */
+	do {
+		scontrol = (scontrol & 0x0f0) | 0x300;
+		if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol)))
+			return rc;
+		/*
+		 * Some PHYs react badly if SStatus is pounded
+		 * immediately after resuming.  Delay 200ms before
+		 * debouncing.
+		 */
+		msleep(200);
 
-	if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol)))
-		return rc;
+		/* is SControl restored correctly? */
+		if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
+			return rc;
+	} while ((scontrol & 0xf0f) != 0x300 && --tries);
 
-	/* Some PHYs react badly if SStatus is pounded immediately
-	 * after resuming.  Delay 200ms before debouncing.
-	 */
-	msleep(200);
+	if ((scontrol & 0xf0f) != 0x300) {
+		ata_link_printk(link, KERN_ERR,
+				"failed to resume link (SControl %X)\n",
+				scontrol);
+		return 0;
+	}
+
+	if (tries < ATA_LINK_RESUME_TRIES)
+		ata_link_printk(link, KERN_WARNING,
+				"link resume succeeded after %d retries\n",
+				ATA_LINK_RESUME_TRIES - tries);
 
 	if ((rc = sata_link_debounce(link, params, deadline)))
 		return rc;

drivers/ata/sata_promise.c

@@ -862,7 +862,7 @@ static void pdc_error_intr(struct ata_port *ap, struct ata_queued_cmd *qc,
 	if (port_status & PDC_DRIVE_ERR)
 		ac_err_mask |= AC_ERR_DEV;
 	if (port_status & (PDC_OVERRUN_ERR | PDC_UNDERRUN_ERR))
-		ac_err_mask |= AC_ERR_HSM;
+		ac_err_mask |= AC_ERR_OTHER;
 	if (port_status & (PDC2_ATA_HBA_ERR | PDC2_ATA_DMA_CNT_ERR))
 		ac_err_mask |= AC_ERR_ATA_BUS;
 	if (port_status & (PDC_PH_ERR | PDC_SH_ERR | PDC_DH_ERR | PDC2_HTO_ERR

drivers/base/memory.c

@@ -309,17 +309,19 @@ static SYSDEV_ATTR(removable, 0444, show_mem_removable, NULL);
  * Block size attribute stuff
  */
 static ssize_t
-print_block_size(struct class *class, char *buf)
+print_block_size(struct sysdev_class *class,
+		 struct sysdev_class_attribute *class_attr,
+		 char *buf)
 {
-	return sprintf(buf, "%lx\n", (unsigned long)PAGES_PER_SECTION * PAGE_SIZE);
+	return sprintf(buf, "%#lx\n", (unsigned long)PAGES_PER_SECTION * PAGE_SIZE);
 }
 
-static CLASS_ATTR(block_size_bytes, 0444, print_block_size, NULL);
+static SYSDEV_CLASS_ATTR(block_size_bytes, 0444, print_block_size, NULL);
 
 static int block_size_init(void)
 {
 	return sysfs_create_file(&memory_sysdev_class.kset.kobj,
-				&class_attr_block_size_bytes.attr);
+				&attr_block_size_bytes.attr);
 }
 
 /*
@@ -330,7 +332,9 @@ static int block_size_init(void)
  */
 #ifdef CONFIG_ARCH_MEMORY_PROBE
 static ssize_t
-memory_probe_store(struct class *class, const char *buf, size_t count)
+memory_probe_store(struct sysdev_class *class,
+		   struct sysdev_class_attribute *class_attr,
+		   const char *buf, size_t count)
 {
 	u64 phys_addr;
 	int nid;
@@ -346,12 +350,12 @@ memory_probe_store(struct class *class, const char *buf, size_t count)
 
 	return count;
 }
-static CLASS_ATTR(probe, S_IWUSR, NULL, memory_probe_store);
+static SYSDEV_CLASS_ATTR(probe, S_IWUSR, NULL, memory_probe_store);
 
 static int memory_probe_init(void)
 {
 	return sysfs_create_file(&memory_sysdev_class.kset.kobj,
-				&class_attr_probe.attr);
+				&attr_probe.attr);
 }
 #else
 static inline int memory_probe_init(void)
@@ -367,7 +371,9 @@ static inline int memory_probe_init(void)
 
 /* Soft offline a page */
 static ssize_t
-store_soft_offline_page(struct class *class, const char *buf, size_t count)
+store_soft_offline_page(struct sysdev_class *class,
+			struct sysdev_class_attribute *class_attr,
+			const char *buf, size_t count)
 {
 	int ret;
 	u64 pfn;
@@ -384,7 +390,9 @@ store_soft_offline_page(struct class *class, const char *buf, size_t count)
 
 /* Forcibly offline a page, including killing processes. */
 static ssize_t
-store_hard_offline_page(struct class *class, const char *buf, size_t count)
+store_hard_offline_page(struct sysdev_class *class,
+			struct sysdev_class_attribute *class_attr,
+			const char *buf, size_t count)
 {
 	int ret;
 	u64 pfn;
@@ -397,18 +405,18 @@ store_hard_offline_page(struct class *class, const char *buf, size_t count)
 	return ret ? ret : count;
 }
 
-static CLASS_ATTR(soft_offline_page, 0644, NULL, store_soft_offline_page);
-static CLASS_ATTR(hard_offline_page, 0644, NULL, store_hard_offline_page);
+static SYSDEV_CLASS_ATTR(soft_offline_page, 0644, NULL, store_soft_offline_page);
+static SYSDEV_CLASS_ATTR(hard_offline_page, 0644, NULL, store_hard_offline_page);
 
 static __init int memory_fail_init(void)
 {
 	int err;
 
 	err = sysfs_create_file(&memory_sysdev_class.kset.kobj,
-				&class_attr_soft_offline_page.attr);
+				&attr_soft_offline_page.attr);
 	if (!err)
 		err = sysfs_create_file(&memory_sysdev_class.kset.kobj,
-				&class_attr_hard_offline_page.attr);
+				&attr_hard_offline_page.attr);
 	return err;
 }
 #else

drivers/char/agp/amd64-agp.c

@@ -725,12 +725,11 @@ static struct pci_driver agp_amd64_pci_driver = {
 int __init agp_amd64_init(void)
 {
 	int err = 0;
-	static int done = 0;
 
 	if (agp_off)
 		return -EINVAL;
 
-	if (done++)
+	if (gart_iommu_aperture)
 		return agp_bridges_found ? 0 : -ENODEV;
 
 	err = pci_register_driver(&agp_amd64_pci_driver);
@@ -771,6 +770,8 @@ int __init agp_amd64_init(void)
 
 static void __exit agp_amd64_cleanup(void)
 {
+	if (gart_iommu_aperture)
+		return;
 	if (aperture_resource)
 		release_resource(aperture_resource);
 	pci_unregister_driver(&agp_amd64_pci_driver);

drivers/char/agp/intel-agp.c

@@ -2460,10 +2460,14 @@ static int __devinit agp_intel_probe(struct pci_dev *pdev,
 				&bridge->mode);
 	}
 
-	if (bridge->driver->mask_memory == intel_i965_mask_memory)
+	if (bridge->driver->mask_memory == intel_i965_mask_memory) {
 		if (pci_set_dma_mask(intel_private.pcidev, DMA_BIT_MASK(36)))
 			dev_err(&intel_private.pcidev->dev,
 				"set gfx device dma mask 36bit failed!\n");
+		else
+			pci_set_consistent_dma_mask(intel_private.pcidev,
+						    DMA_BIT_MASK(36));
+	}
 
 	pci_set_drvdata(pdev, bridge);
 	return agp_add_bridge(bridge);

drivers/char/hw_random/virtio-rng.c

@@ -114,7 +114,7 @@ static struct virtio_device_id id_table[] = {
 	{ 0 },
 };
 
-static struct virtio_driver virtio_rng = {
+static struct virtio_driver virtio_rng_driver = {
 	.driver.name =	KBUILD_MODNAME,
 	.driver.owner =	THIS_MODULE,
 	.id_table =	id_table,
@@ -124,12 +124,12 @@ static struct virtio_driver virtio_rng = {
 
 static int __init init(void)
 {
-	return register_virtio_driver(&virtio_rng);
+	return register_virtio_driver(&virtio_rng_driver);
 }
 
 static void __exit fini(void)
 {
-	unregister_virtio_driver(&virtio_rng);
+	unregister_virtio_driver(&virtio_rng_driver);
 }
 module_init(init);
 module_exit(fini);

drivers/edac/amd64_edac.c

@@ -197,7 +197,7 @@ static int amd64_get_scrub_rate(struct mem_ctl_info *mci, u32 *bw)
 	edac_printk(KERN_DEBUG, EDAC_MC,
 		    "pci-read, sdram scrub control value: %d \n", scrubval);
 
-	for (i = 0; ARRAY_SIZE(scrubrates); i++) {
+	for (i = 0; i < ARRAY_SIZE(scrubrates); i++) {
 		if (scrubrates[i].scrubval == scrubval) {
 			*bw = scrubrates[i].bandwidth;
 			status = 0;