Merge ../scsi-rc-fixes-2.6

.gitignore

@@ -20,6 +20,7 @@
 # Top-level generic files
 #
 tags
+TAGS
 vmlinux*
 System.map
 Module.symvers

CREDITS

@@ -45,7 +45,7 @@ S: Longford, Ireland
 S: Sydney, Australia
 
 N: Tigran A. Aivazian
-E: tigran@veritas.com
+E: tigran@aivazian.fsnet.co.uk
 W: http://www.moses.uklinux.net/patches
 D: BFS filesystem
 D: Intel IA32 CPU microcode update support
@@ -3511,14 +3511,12 @@ D: The Linux Support Team Erlangen
 
 N: David Weinehall
 E: tao@acc.umu.se
+P: 1024D/DC47CA16 7ACE 0FB0 7A74 F994 9B36  E1D1 D14E 8526 DC47 CA16
 W: http://www.acc.umu.se/~tao/
-W: http://www.acc.umu.se/~mcalinux/
+D: v2.0 kernel maintainer
 D: Fixes for the NE/2-driver
 D: Miscellaneous MCA-support
 D: Cleanup of the Config-files
-S: Axtorpsvagen 40:20
-S: S-903 37  UMEA
-S: Sweden
 
 N: Matt Welsh
 E: mdw@metalab.unc.edu

Documentation/ABI/testing/sysfs-power

@@ -21,7 +21,7 @@ Description:
 		these states.
 
 What:		/sys/power/disk
-Date:		August 2006
+Date:		September 2006
 Contact:	Rafael J. Wysocki <rjw@sisk.pl>
 Description:
 		The /sys/power/disk file controls the operating mode of the
@@ -39,6 +39,19 @@ Description:
 		'reboot' - the memory image will be saved by the kernel and
 		the system will be rebooted.
 
+		Additionally, /sys/power/disk can be used to turn on one of the
+		two testing modes of the suspend-to-disk mechanism: 'testproc'
+		or 'test'.  If the suspend-to-disk mechanism is in the
+		'testproc' mode, writing 'disk' to /sys/power/state will cause
+		the kernel to disable nonboot CPUs and freeze tasks, wait for 5
+		seconds, unfreeze tasks and enable nonboot CPUs.  If it is in
+		the 'test' mode, writing 'disk' to /sys/power/state will cause
+		the kernel to disable nonboot CPUs and freeze tasks, shrink
+		memory, suspend devices, wait for 5 seconds, resume devices,
+		unfreeze tasks and enable nonboot CPUs.  Then, we are able to
+		look in the log messages and work out, for example, which code
+		is being slow and which device drivers are misbehaving.
+
 		The suspend-to-disk method may be chosen by writing to this
 		file one of the accepted strings:
 
@@ -46,6 +59,8 @@ Description:
 		'platform'
 		'shutdown'
 		'reboot'
+		'testproc'
+		'test'
 
 		It will only change to 'firmware' or 'platform' if the system
 		supports that.

Documentation/DocBook/Makefile

@@ -9,7 +9,7 @@
 DOCBOOKS := wanbook.xml z8530book.xml mcabook.xml videobook.xml \
 	    kernel-hacking.xml kernel-locking.xml deviceiobook.xml \
 	    procfs-guide.xml writing_usb_driver.xml \
-	    kernel-api.xml journal-api.xml lsm.xml usb.xml \
+	    kernel-api.xml filesystems.xml lsm.xml usb.xml \
 	    gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \
 	    genericirq.xml
 

Documentation/DocBook/journal-api.tmpl → Documentation/DocBook/filesystems.tmpl

@@ -2,39 +2,11 @@
 <!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
 	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
 
-<book id="LinuxJBDAPI">
+<book id="Linux-filesystems-API">
  <bookinfo>
-  <title>The Linux Journalling API</title>
-  <authorgroup>
-  <author>
-     <firstname>Roger</firstname>
-     <surname>Gammans</surname>
-     <affiliation>
-     <address>
-      <email>rgammans@computer-surgery.co.uk</email>
-     </address>
-    </affiliation>
-     </author> 
-  </authorgroup>
-  
-  <authorgroup>
-   <author>
-    <firstname>Stephen</firstname>
-    <surname>Tweedie</surname>
-    <affiliation>
-     <address>
-      <email>sct@redhat.com</email>
-     </address>
-    </affiliation>
-   </author>
-  </authorgroup>
+  <title>Linux Filesystems API</title>
 
-  <copyright>
-   <year>2002</year>
-   <holder>Roger Gammans</holder>
-  </copyright>
-
-<legalnotice>
+  <legalnotice>
    <para>
      This documentation is free software; you can redistribute
      it and/or modify it under the terms of the GNU General Public
@@ -42,21 +14,21 @@
      version 2 of the License, or (at your option) any later
      version.
    </para>
-      
+
    <para>
      This program is distributed in the hope that it will be
      useful, but WITHOUT ANY WARRANTY; without even the implied
      warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
      See the GNU General Public License for more details.
    </para>
-      
+
    <para>
      You should have received a copy of the GNU General Public
      License along with this program; if not, write to the Free
      Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
      MA 02111-1307 USA
    </para>
-      
+
    <para>
      For more details see the file COPYING in the source
      distribution of Linux.
@@ -66,17 +38,113 @@
 
 <toc></toc>
 
-  <chapter id="Overview">
+  <chapter id="vfs">
+     <title>The Linux VFS</title>
+     <sect1><title>The Filesystem types</title>
+!Iinclude/linux/fs.h
+     </sect1>
+     <sect1><title>The Directory Cache</title>
+!Efs/dcache.c
+!Iinclude/linux/dcache.h
+     </sect1>
+     <sect1><title>Inode Handling</title>
+!Efs/inode.c
+!Efs/bad_inode.c
+     </sect1>
+     <sect1><title>Registration and Superblocks</title>
+!Efs/super.c
+     </sect1>
+     <sect1><title>File Locks</title>
+!Efs/locks.c
+!Ifs/locks.c
+     </sect1>
+     <sect1><title>Other Functions</title>
+!Efs/mpage.c
+!Efs/namei.c
+!Efs/buffer.c
+!Efs/bio.c
+!Efs/seq_file.c
+!Efs/filesystems.c
+!Efs/fs-writeback.c
+!Efs/block_dev.c
+     </sect1>
+  </chapter>
+
+  <chapter id="proc">
+     <title>The proc filesystem</title>
+
+     <sect1><title>sysctl interface</title>
+!Ekernel/sysctl.c
+     </sect1>
+
+     <sect1><title>proc filesystem interface</title>
+!Ifs/proc/base.c
+     </sect1>
+  </chapter>
+
+  <chapter id="sysfs">
+     <title>The Filesystem for Exporting Kernel Objects</title>
+!Efs/sysfs/file.c
+!Efs/sysfs/symlink.c
+!Efs/sysfs/bin.c
+  </chapter>
+
+  <chapter id="debugfs">
+     <title>The debugfs filesystem</title>
+
+     <sect1><title>debugfs interface</title>
+!Efs/debugfs/inode.c
+!Efs/debugfs/file.c
+     </sect1>
+  </chapter>
+
+  <chapter id="LinuxJDBAPI">
+  <chapterinfo>
+  <title>The Linux Journalling API</title>
+
+  <authorgroup>
+  <author>
+     <firstname>Roger</firstname>
+     <surname>Gammans</surname>
+     <affiliation>
+     <address>
+      <email>rgammans@computer-surgery.co.uk</email>
+     </address>
+    </affiliation>
+     </author>
+  </authorgroup>
+
+  <authorgroup>
+   <author>
+    <firstname>Stephen</firstname>
+    <surname>Tweedie</surname>
+    <affiliation>
+     <address>
+      <email>sct@redhat.com</email>
+     </address>
+    </affiliation>
+   </author>
+  </authorgroup>
+
+  <copyright>
+   <year>2002</year>
+   <holder>Roger Gammans</holder>
+  </copyright>
+  </chapterinfo>
+
+  <title>The Linux Journalling API</title>
+
+    <sect1>
      <title>Overview</title>
-  <sect1>
+    <sect2>
      <title>Details</title>
 <para>
-The journalling layer is  easy to use. You need to 
+The journalling layer is  easy to use. You need to
 first of all create a journal_t data structure. There are
 two calls to do this dependent on how you decide to allocate the physical
-media on which the journal resides. The journal_init_inode() call 
+media on which the journal resides. The journal_init_inode() call
 is for journals stored in filesystem inodes, or the journal_init_dev()
-call can be use for journal stored on a raw device (in a continuous range 
+call can be use for journal stored on a raw device (in a continuous range
 of blocks). A journal_t is a typedef for a struct pointer, so when
 you are finally finished make sure you call journal_destroy() on it
 to free up any used kernel memory.
@@ -91,27 +159,26 @@ need to call journal_create().
 <para>
 Most of the time however your journal file will already have been created, but
 before you load it you must call journal_wipe() to empty the journal file.
-Hang on, you say , what if the filesystem wasn't cleanly umount()'d . Well, it is the 
+Hang on, you say , what if the filesystem wasn't cleanly umount()'d . Well, it is the
 job of the client file system to detect this and skip the call to journal_wipe().
 </para>
 
 <para>
 In either case the next call should be to journal_load() which prepares the
-journal file for use. Note that journal_wipe(..,0) calls journal_skip_recovery() 
+journal file for use. Note that journal_wipe(..,0) calls journal_skip_recovery()
 for you if it detects any outstanding transactions in the journal and similarly
 journal_load() will call journal_recover() if necessary.
 I would advise reading fs/ext3/super.c for examples on this stage.
-[RGG: Why is the journal_wipe() call necessary - doesn't this needlessly 
-complicate the API. Or isn't a good idea for the journal layer to hide 
+[RGG: Why is the journal_wipe() call necessary - doesn't this needlessly
+complicate the API. Or isn't a good idea for the journal layer to hide
 dirty mounts from the client fs]
 </para>
 
 <para>
-Now you can go ahead and start modifying the underlying 
+Now you can go ahead and start modifying the underlying
 filesystem. Almost.
 </para>
 
-
 <para>
 
 You still need to actually journal your filesystem changes, this
@@ -138,10 +205,10 @@ individual buffers (blocks). Before you start to modify a buffer you
 need to call journal_get_{create,write,undo}_access() as appropriate,
 this allows the journalling layer to copy the unmodified data if it
 needs to. After all the buffer may be part of a previously uncommitted
-transaction. 
+transaction.
 At this point you are at last ready to modify a buffer, and once
 you are have done so you need to call journal_dirty_{meta,}data().
-Or if you've asked for access to a buffer you now know is now longer 
+Or if you've asked for access to a buffer you now know is now longer
 required to be pushed back on the device you can call journal_forget()
 in much the same way as you might have used bforget() in the past.
 </para>
@@ -156,7 +223,6 @@ Then at umount time , in your put_super() (2.4) or write_super() (2.5)
 you can then call journal_destroy() to clean up your in-core journal object.
 </para>
 
-
 <para>
 Unfortunately there a couple of ways the journal layer can cause a deadlock.
 The first thing to note is that each task can only have
@@ -164,19 +230,19 @@ a single outstanding transaction at any one time, remember nothing
 commits until the outermost journal_stop(). This means
 you must complete the transaction at the end of each file/inode/address
 etc. operation you perform, so that the journalling system isn't re-entered
-on another journal. Since transactions can't be nested/batched 
+on another journal. Since transactions can't be nested/batched
 across differing journals, and another filesystem other than
 yours (say ext3) may be modified in a later syscall.
 </para>
 
 <para>
-The second case to bear in mind is that journal_start() can 
-block if there isn't enough space in the journal for your transaction 
+The second case to bear in mind is that journal_start() can
+block if there isn't enough space in the journal for your transaction
 (based on the passed nblocks param) - when it blocks it merely(!) needs to
-wait for transactions to complete and be committed from other tasks, 
-so essentially we are waiting for journal_stop(). So to avoid 
+wait for transactions to complete and be committed from other tasks,
+so essentially we are waiting for journal_stop(). So to avoid
 deadlocks you must treat journal_start/stop() as if they
-were semaphores and include them in your semaphore ordering rules to prevent 
+were semaphores and include them in your semaphore ordering rules to prevent
 deadlocks. Note that journal_extend() has similar blocking behaviour to
 journal_start() so you can deadlock here just as easily as on journal_start().
 </para>
@@ -184,7 +250,7 @@ journal_start() so you can deadlock here just as easily as on journal_start().
 <para>
 Try to reserve the right number of blocks the first time. ;-). This will
 be the maximum number of blocks you are going to touch in this transaction.
-I advise having a look at at least ext3_jbd.h to see the basis on which 
+I advise having a look at at least ext3_jbd.h to see the basis on which
 ext3 uses to make these decisions.
 </para>
 
@@ -193,13 +259,13 @@ Another wriggle to watch out for is your on-disk block allocation strategy.
 why? Because, if you undo a delete, you need to ensure you haven't reused any
 of the freed blocks in a later transaction. One simple way of doing this
 is make sure any blocks you allocate only have checkpointed transactions
-listed against them. Ext3 does this in ext3_test_allocatable(). 
+listed against them. Ext3 does this in ext3_test_allocatable().
 </para>
 
 <para>
 Lock is also providing through journal_{un,}lock_updates(),
 ext3 uses this when it wants a window with a clean and stable fs for a moment.
-eg. 
+eg.
 </para>
 
 <programlisting>
@@ -230,19 +296,19 @@ extend it like this:-
 		struct journal_callback for_jbd;
 		// Stuff for myfs allocated together.
 		myfs_inode*    i_commited;
-	
+
 	}
 </programlisting>
 
 <para>
-this would be useful if you needed to know when data was committed to a 
+this would be useful if you needed to know when data was committed to a
 particular inode.
 </para>
 
-</sect1>
+    </sect2>
 
-<sect1>
-<title>Summary</title>
+    <sect2>
+     <title>Summary</title>
 <para>
 Using the journal is a matter of wrapping the different context changes,
 being each mount, each modification (transaction) and each changed buffer
@@ -260,15 +326,15 @@ an example.
   if (clean) journal_wipe();
   journal_load();
 
-   foreach(transaction) { /*transactions must be 
+   foreach(transaction) { /*transactions must be
                             completed before
-                            a syscall returns to 
+                            a syscall returns to
                             userspace*/
 
           handle_t * xct=journal_start(my_jnrl);
           foreach(bh) {
                 journal_get_{create,write,undo}_access(xact,bh);
-                if ( myfs_modify(bh) ) { /* returns true 
+                if ( myfs_modify(bh) ) { /* returns true
                                         if makes changes */
                            journal_dirty_{meta,}data(xact,bh);
                 } else {
@@ -279,55 +345,57 @@ an example.
    }
    journal_destroy(my_jrnl);
 </programlisting>
-</sect1>
+    </sect2>
 
-</chapter>
+    </sect1>
 
-  <chapter id="adt">
+    <sect1>
      <title>Data Types</title>
-     <para>	
+     <para>
 	The journalling layer uses typedefs to 'hide' the concrete definitions
 	of the structures used. As a client of the JBD layer you can
 	just rely on the using the pointer as a magic cookie  of some sort.
-	
+
 	Obviously the hiding is not enforced as this is 'C'.
-	</para>
-	<sect1><title>Structures</title>
+     </para>
+	<sect2><title>Structures</title>
 !Iinclude/linux/jbd.h
-	</sect1>
-</chapter>
+	</sect2>
+    </sect1>
 
-  <chapter id="calls">
+    <sect1>
      <title>Functions</title>
-     <para>	
+     <para>
 	The functions here are split into two groups those that
 	affect a journal as a whole, and those which are used to
 	manage transactions
-</para>
-	<sect1><title>Journal Level</title>
+     </para>
+	<sect2><title>Journal Level</title>
 !Efs/jbd/journal.c
 !Ifs/jbd/recovery.c
-	</sect1>
-	<sect1><title>Transasction Level</title>
-!Efs/jbd/transaction.c	
-	</sect1>
-</chapter>
-<chapter>
+	</sect2>
+	<sect2><title>Transasction Level</title>
+!Efs/jbd/transaction.c
+	</sect2>
+    </sect1>
+    <sect1>
      <title>See also</title>
 	<para>
-	<citation>
+	  <citation>
 	   <ulink url="ftp://ftp.uk.linux.org/pub/linux/sct/fs/jfs/journal-design.ps.gz">
-	   	Journaling the Linux ext2fs Filesystem,LinuxExpo 98, Stephen Tweedie
+	   	Journaling the Linux ext2fs Filesystem, LinuxExpo 98, Stephen Tweedie
 	   </ulink>
-	   </citation>
-	   </para>
-	   <para>
+	  </citation>
+	</para>
+	<para>
 	   <citation>
 	   <ulink url="http://olstrans.sourceforge.net/release/OLS2000-ext3/OLS2000-ext3.html">
-	   	Ext3 Journalling FileSystem , OLS 2000, Dr. Stephen Tweedie
+	   	Ext3 Journalling FileSystem, OLS 2000, Dr. Stephen Tweedie
 	   </ulink>
 	   </citation>
-	   </para>
-</chapter>
+	</para>
+    </sect1>
+
+  </chapter>
 
 </book>

Documentation/DocBook/kernel-api.tmpl

@@ -182,66 +182,6 @@ X!Ilib/string.c
      </sect1>
   </chapter>
 
-  <chapter id="vfs">
-     <title>The Linux VFS</title>
-     <sect1><title>The Filesystem types</title>
-!Iinclude/linux/fs.h
-     </sect1>
-     <sect1><title>The Directory Cache</title>
-!Efs/dcache.c
-!Iinclude/linux/dcache.h
-     </sect1>
-     <sect1><title>Inode Handling</title>
-!Efs/inode.c
-!Efs/bad_inode.c
-     </sect1>
-     <sect1><title>Registration and Superblocks</title>
-!Efs/super.c
-     </sect1>
-     <sect1><title>File Locks</title>
-!Efs/locks.c
-!Ifs/locks.c
-     </sect1>
-     <sect1><title>Other Functions</title>
-!Efs/mpage.c
-!Efs/namei.c
-!Efs/buffer.c
-!Efs/bio.c
-!Efs/seq_file.c
-!Efs/filesystems.c
-!Efs/fs-writeback.c
-!Efs/block_dev.c
-     </sect1>
-  </chapter>
-
-  <chapter id="proc">
-     <title>The proc filesystem</title>
- 
-     <sect1><title>sysctl interface</title>
-!Ekernel/sysctl.c
-     </sect1>
-
-     <sect1><title>proc filesystem interface</title>
-!Ifs/proc/base.c
-     </sect1>
-  </chapter>
-
-  <chapter id="sysfs">
-     <title>The Filesystem for Exporting Kernel Objects</title>
-!Efs/sysfs/file.c
-!Efs/sysfs/symlink.c
-!Efs/sysfs/bin.c
-  </chapter>
-
-  <chapter id="debugfs">
-     <title>The debugfs filesystem</title>
- 
-     <sect1><title>debugfs interface</title>
-!Efs/debugfs/inode.c
-!Efs/debugfs/file.c
-     </sect1>
-  </chapter>
-
   <chapter id="relayfs">
      <title>relay interface support</title>
 

Documentation/HOWTO

@@ -395,6 +395,26 @@ bugme-janitor mailing list (every change in the bugzilla is mailed here)
 
 
 
+Managing bug reports
+--------------------
+
+One of the best ways to put into practice your hacking skills is by fixing
+bugs reported by other people. Not only you will help to make the kernel
+more stable, you'll learn to fix real world problems and you will improve
+your skills, and other developers will be aware of your presence. Fixing
+bugs is one of the best ways to get merits among other developers, because
+not many people like wasting time fixing other people's bugs.
+
+To work in the already reported bug reports, go to http://bugzilla.kernel.org.
+If you want to be advised of the future bug reports, you can subscribe to the
+bugme-new mailing list (only new bug reports are mailed here) or to the
+bugme-janitor mailing list (every change in the bugzilla is mailed here)
+
+	http://lists.osdl.org/mailman/listinfo/bugme-new
+	http://lists.osdl.org/mailman/listinfo/bugme-janitors
+
+
+
 Mailing lists
 -------------
 

Documentation/MSI-HOWTO.txt

@@ -470,7 +470,68 @@ LOC:     324553     325068
 ERR:          0
 MIS:          0
 
-6. FAQ
+6. MSI quirks
+
+Several PCI chipsets or devices are known to not support MSI.
+The PCI stack provides 3 possible levels of MSI disabling:
+* on a single device
+* on all devices behind a specific bridge
+* globally
+
+6.1. Disabling MSI on a single device
+
+Under some circumstances, it might be required to disable MSI on a
+single device, It may be achived by either not calling pci_enable_msi()
+or all, or setting the pci_dev->no_msi flag before (most of the time
+in a quirk).
+
+6.2. Disabling MSI below a bridge
+
+The vast majority of MSI quirks are required by PCI bridges not
+being able to route MSI between busses. In this case, MSI have to be
+disabled on all devices behind this bridge. It is achieves by setting
+the PCI_BUS_FLAGS_NO_MSI flag in the pci_bus->bus_flags of the bridge
+subordinate bus. There is no need to set the same flag on bridges that
+are below the broken brigde. When pci_enable_msi() is called to enable
+MSI on a device, pci_msi_supported() takes care of checking the NO_MSI
+flag in all parent busses of the device.
+
+Some bridges actually support dynamic MSI support enabling/disabling
+by changing some bits in their PCI configuration space (especially
+the Hypertransport chipsets such as the nVidia nForce and Serverworks
+HT2000). It may then be required to update the NO_MSI flag on the
+corresponding devices in the sysfs hierarchy. To enable MSI support
+on device "0000:00:0e", do:
+
+	echo 1 > /sys/bus/pci/devices/0000:00:0e/msi_bus
+
+To disable MSI support, echo 0 instead of 1. Note that it should be
+used with caution since changing this value might break interrupts.
+
+6.3. Disabling MSI globally
+
+Some extreme cases may require to disable MSI globally on the system.
+For now, the only known case is a Serverworks PCI-X chipsets (MSI are
+not supported on several busses that are not all connected to the
+chipset in the Linux PCI hierarchy). In the vast majority of other
+cases, disabling only behind a specific bridge is enough.
+
+For debugging purpose, the user may also pass pci=nomsi on the kernel
+command-line to explicitly disable MSI globally. But, once the appro-
+priate quirks are added to the kernel, this option should not be
+required anymore.
+
+6.4. Finding why MSI cannot be enabled on a device
+
+Assuming that MSI are not enabled on a device, you should look at
+dmesg to find messages that quirks may output when disabling MSI
+on some devices, some bridges or even globally.
+Then, lspci -t gives the list of bridges above a device. Reading
+/sys/bus/pci/devices/0000:00:0e/msi_bus will tell you whether MSI
+are enabled (1) or disabled (0). In 0 is found in a single bridge
+msi_bus file above the device, MSI cannot be enabled.
+
+7. FAQ
 
 Q1. Are there any limitations on using the MSI?
 

Documentation/accounting/getdelays.c

@@ -49,7 +49,7 @@ __u64 stime, utime;
 	}
 
 /* Maximum size of response requested or message sent */
-#define MAX_MSG_SIZE	256
+#define MAX_MSG_SIZE	1024
 /* Maximum number of cpus expected to be specified in a cpumask */
 #define MAX_CPUS	32
 /* Maximum length of pathname to log file */

Documentation/cpu-hotplug.txt

@@ -46,7 +46,7 @@ maxcpus=n    Restrict boot time cpus to n. Say if you have 4 cpus, using
              maxcpus=2 will only boot 2. You can choose to bring the
              other cpus later online, read FAQ's for more info.
 
-additional_cpus*=n	Use this to limit hotpluggable cpus. This option sets
+additional_cpus=n (*)	Use this to limit hotpluggable cpus. This option sets
   			cpu_possible_map = cpu_present_map + additional_cpus
 
 (*) Option valid only for following architectures
@@ -101,15 +101,15 @@ cpu_possible_map/for_each_possible_cpu() to iterate.
 
 Never use anything other than cpumask_t to represent bitmap of CPUs.
 
-#include <linux/cpumask.h>
+	#include <linux/cpumask.h>
 
-for_each_possible_cpu     - Iterate over cpu_possible_map
-for_each_online_cpu       - Iterate over cpu_online_map
-for_each_present_cpu      - Iterate over cpu_present_map
-for_each_cpu_mask(x,mask) - Iterate over some random collection of cpu mask.
+	for_each_possible_cpu     - Iterate over cpu_possible_map
+	for_each_online_cpu       - Iterate over cpu_online_map
+	for_each_present_cpu      - Iterate over cpu_present_map
+	for_each_cpu_mask(x,mask) - Iterate over some random collection of cpu mask.
 
-#include <linux/cpu.h>
-lock_cpu_hotplug() and unlock_cpu_hotplug():
+	#include <linux/cpu.h>
+	lock_cpu_hotplug() and unlock_cpu_hotplug():
 
 The above calls are used to inhibit cpu hotplug operations. While holding the
 cpucontrol mutex, cpu_online_map will not change. If you merely need to avoid
@@ -120,7 +120,7 @@ will work as long as stop_machine_run() is used to take a cpu down.
 
 CPU Hotplug - Frequently Asked Questions.
 
-Q: How to i enable my kernel to support CPU hotplug?
+Q: How to enable my kernel to support CPU hotplug?
 A: When doing make defconfig, Enable CPU hotplug support
 
    "Processor type and Features" -> Support for Hotpluggable CPUs
@@ -141,39 +141,39 @@ A: You should now notice an entry in sysfs.
 Check if sysfs is mounted, using the "mount" command. You should notice
 an entry as shown below in the output.
 
-....
-none on /sys type sysfs (rw)
-....
+	....
+	none on /sys type sysfs (rw)
+	....
 
-if this is not mounted, do the following.
+If this is not mounted, do the following.
 
-#mkdir /sysfs
-#mount -t sysfs sys /sys
+	 #mkdir /sysfs
+	#mount -t sysfs sys /sys
 
-now you should see entries for all present cpu, the following is an example
+Now you should see entries for all present cpu, the following is an example
 in a 8-way system.
 
-#pwd
-#/sys/devices/system/cpu
-#ls -l
-total 0
-drwxr-xr-x  10 root root 0 Sep 19 07:44 .
-drwxr-xr-x  13 root root 0 Sep 19 07:45 ..
-drwxr-xr-x   3 root root 0 Sep 19 07:44 cpu0
-drwxr-xr-x   3 root root 0 Sep 19 07:44 cpu1
-drwxr-xr-x   3 root root 0 Sep 19 07:44 cpu2
-drwxr-xr-x   3 root root 0 Sep 19 07:44 cpu3
-drwxr-xr-x   3 root root 0 Sep 19 07:44 cpu4
-drwxr-xr-x   3 root root 0 Sep 19 07:44 cpu5
-drwxr-xr-x   3 root root 0 Sep 19 07:44 cpu6
-drwxr-xr-x   3 root root 0 Sep 19 07:48 cpu7
+	#pwd
+	#/sys/devices/system/cpu
+	#ls -l
+	total 0
+	drwxr-xr-x  10 root root 0 Sep 19 07:44 .
+	drwxr-xr-x  13 root root 0 Sep 19 07:45 ..
+	drwxr-xr-x   3 root root 0 Sep 19 07:44 cpu0
+	drwxr-xr-x   3 root root 0 Sep 19 07:44 cpu1
+	drwxr-xr-x   3 root root 0 Sep 19 07:44 cpu2
+	drwxr-xr-x   3 root root 0 Sep 19 07:44 cpu3
+	drwxr-xr-x   3 root root 0 Sep 19 07:44 cpu4
+	drwxr-xr-x   3 root root 0 Sep 19 07:44 cpu5
+	drwxr-xr-x   3 root root 0 Sep 19 07:44 cpu6
+	drwxr-xr-x   3 root root 0 Sep 19 07:48 cpu7
 
 Under each directory you would find an "online" file which is the control
 file to logically online/offline a processor.
 
 Q: Does hot-add/hot-remove refer to physical add/remove of cpus?
 A: The usage of hot-add/remove may not be very consistently used in the code.
-CONFIG_CPU_HOTPLUG enables logical online/offline capability in the kernel.
+CONFIG_HOTPLUG_CPU enables logical online/offline capability in the kernel.
 To support physical addition/removal, one would need some BIOS hooks and
 the platform should have something like an attention button in PCI hotplug.
 CONFIG_ACPI_HOTPLUG_CPU enables ACPI support for physical add/remove of CPUs.
@@ -181,17 +181,17 @@ CONFIG_ACPI_HOTPLUG_CPU enables ACPI support for physical add/remove of CPUs.
 Q: How do i logically offline a CPU?
 A: Do the following.
 
-#echo 0 > /sys/devices/system/cpu/cpuX/online
+	#echo 0 > /sys/devices/system/cpu/cpuX/online
 
-once the logical offline is successful, check
+Once the logical offline is successful, check
 
-#cat /proc/interrupts
+	#cat /proc/interrupts
 
-you should now not see the CPU that you removed. Also online file will report
+You should now not see the CPU that you removed. Also online file will report
 the state as 0 when a cpu if offline and 1 when its online.
 
-#To display the current cpu state.
-#cat /sys/devices/system/cpu/cpuX/online
+	#To display the current cpu state.
+	#cat /sys/devices/system/cpu/cpuX/online
 
 Q: Why cant i remove CPU0 on some systems?
 A: Some architectures may have some special dependency on a certain CPU.
@@ -234,8 +234,8 @@ Q: If i have some kernel code that needs to be aware of CPU arrival and
    departure, how to i arrange for proper notification?
 A: This is what you would need in your kernel code to receive notifications.
 
-    #include <linux/cpu.h>
-    static int __cpuinit foobar_cpu_callback(struct notifier_block *nfb,
+	#include <linux/cpu.h>
+	static int __cpuinit foobar_cpu_callback(struct notifier_block *nfb,
 					    unsigned long action, void *hcpu)
 	{
 		unsigned int cpu = (unsigned long)hcpu;
@@ -279,10 +279,10 @@ Q: I don't see my action being called for all CPUs already up and running?
 A: Yes, CPU notifiers are called only when new CPUs are on-lined or offlined.
    If you need to perform some action for each cpu already in the system, then
 
-  for_each_online_cpu(i) {
+	for_each_online_cpu(i) {
 		foobar_cpu_callback(&foobar_cpu_notifier, CPU_UP_PREPARE, i);
-		foobar_cpu_callback(&foobar-cpu_notifier, CPU_ONLINE, i);
-  }
+		foobar_cpu_callback(&foobar_cpu_notifier, CPU_ONLINE, i);
+	}
 
 Q: If i would like to develop cpu hotplug support for a new architecture,
    what do i need at a minimum?
@@ -307,38 +307,38 @@ Q: I need to ensure that a particular cpu is not removed when there is some
    work specific to this cpu is in progress.
 A: First switch the current thread context to preferred cpu
 
-   int my_func_on_cpu(int cpu)
-   {
-       cpumask_t saved_mask, new_mask = CPU_MASK_NONE;
-       int curr_cpu, err = 0;
-
-       saved_mask = current->cpus_allowed;
-       cpu_set(cpu, new_mask);
-       err = set_cpus_allowed(current, new_mask);
-
-       if (err)
-           return err;
-
-       /*
-        * If we got scheduled out just after the return from
-        * set_cpus_allowed() before running the work, this ensures
-        * we stay locked.
-        */
-       curr_cpu = get_cpu();
-
-       if (curr_cpu != cpu) {
-	   err = -EAGAIN;
-           goto ret;
-       } else {
-       	   /*
-	    * Do work : But cant sleep, since get_cpu() disables preempt
-	    */
-       }
-    ret:
-    	put_cpu();
-	set_cpus_allowed(current, saved_mask);
-	return err;
-    }
+	int my_func_on_cpu(int cpu)
+	{
+		cpumask_t saved_mask, new_mask = CPU_MASK_NONE;
+		int curr_cpu, err = 0;
+
+		saved_mask = current->cpus_allowed;
+		cpu_set(cpu, new_mask);
+		err = set_cpus_allowed(current, new_mask);
+
+		if (err)
+			return err;
+
+		/*
+		 * If we got scheduled out just after the return from
+		 * set_cpus_allowed() before running the work, this ensures
+		 * we stay locked.
+		 */
+		curr_cpu = get_cpu();
+
+		if (curr_cpu != cpu) {
+			err = -EAGAIN;
+			goto ret;
+		} else {
+			/*
+			 * Do work : But cant sleep, since get_cpu() disables preempt
+			 */
+		}
+		ret:
+			put_cpu();
+			set_cpus_allowed(current, saved_mask);
+			return err;
+		}
 
 
 Q: How do we determine how many CPUs are available for hotplug.

Documentation/feature-removal-schedule.txt

@@ -53,18 +53,6 @@ Who:	Mauro Carvalho Chehab <mchehab@brturbo.com.br>
 
 ---------------------------
 
-What:	sys_sysctl
-When:	January 2007
-Why:	The same information is available through /proc/sys and that is the
-	interface user space prefers to use. And there do not appear to be
-	any existing user in user space of sys_sysctl.  The additional
-	maintenance overhead of keeping a set of binary names gets
-	in the way of doing a good job of maintaining this interface.
-
-Who:	Eric Biederman <ebiederm@xmission.com>
-
----------------------------
-
 What:	PCMCIA control ioctl (needed for pcmcia-cs [cardmgr, cardctl])
 When:	November 2005
 Files:	drivers/pcmcia/: pcmcia_ioctl.c
@@ -255,7 +243,7 @@ Who:	Stephen Hemminger <shemminger@osdl.org>
 
 
 What:	PHYSDEVPATH, PHYSDEVBUS, PHYSDEVDRIVER in the uevent environment
-When:	Oktober 2008
+When:	October 2008
 Why:	The stacking of class devices makes these values misleading and
 	inconsistent.
 	Class devices should not carry any of these properties, and bus

Documentation/filesystems/00-INDEX

@@ -34,6 +34,8 @@ ext2.txt
 	- info, mount options and specifications for the Ext2 filesystem.
 ext3.txt
 	- info, mount options and specifications for the Ext3 filesystem.
+ext4.txt
+	- info, mount options and specifications for the Ext4 filesystem.
 files.txt
 	- info on file management in the Linux kernel.
 fuse.txt

Documentation/filesystems/ext4.txt

@@ -0,0 +1,236 @@
+
+Ext4 Filesystem
+===============
+
+This is a development version of the ext4 filesystem, an advanced level
+of the ext3 filesystem which incorporates scalability and reliability
+enhancements for supporting large filesystems (64 bit) in keeping with
+increasing disk capacities and state-of-the-art feature requirements.
+
+Mailing list: linux-ext4@vger.kernel.org
+
+
+1. Quick usage instructions:
+===========================
+
+  - Grab updated e2fsprogs from
+    ftp://ftp.kernel.org/pub/linux/kernel/people/tytso/e2fsprogs-interim/
+    This is a patchset on top of e2fsprogs-1.39, which can be found at
+    ftp://ftp.kernel.org/pub/linux/kernel/people/tytso/e2fsprogs/
+
+  - It's still mke2fs -j /dev/hda1
+
+  - mount /dev/hda1 /wherever -t ext4dev
+
+  - To enable extents,
+
+	mount /dev/hda1 /wherever -t ext4dev -o extents
+
+  - The filesystem is compatible with the ext3 driver until you add a file
+    which has extents (ie: `mount -o extents', then create a file).
+
+    NOTE: The "extents" mount flag is temporary.  It will soon go away and
+    extents will be enabled by the "-o extents" flag to mke2fs or tune2fs
+
+  - When comparing performance with other filesystems, remember that
+    ext3/4 by default offers higher data integrity guarantees than most.  So
+    when comparing with a metadata-only journalling filesystem, use `mount -o
+    data=writeback'.  And you might as well use `mount -o nobh' too along
+    with it.  Making the journal larger than the mke2fs default often helps
+    performance with metadata-intensive workloads.
+
+2. Features
+===========
+
+2.1 Currently available
+
+* ability to use filesystems > 16TB
+* extent format reduces metadata overhead (RAM, IO for access, transactions)
+* extent format more robust in face of on-disk corruption due to magics,
+* internal redunancy in tree
+
+2.1 Previously available, soon to be enabled by default by "mkefs.ext4":
+
+* dir_index and resize inode will be on by default
+* large inodes will be used by default for fast EAs, nsec timestamps, etc
+
+2.2 Candidate features for future inclusion
+
+There are several under discussion, whether they all make it in is
+partly a function of how much time everyone has to work on them:
+
+* improved file allocation (multi-block alloc, delayed alloc; basically done)
+* fix 32000 subdirectory limit (patch exists, needs some e2fsck work)
+* nsec timestamps for mtime, atime, ctime, create time (patch exists,
+  needs some e2fsck work)
+* inode version field on disk (NFSv4, Lustre; prototype exists)
+* reduced mke2fs/e2fsck time via uninitialized groups (prototype exists)
+* journal checksumming for robustness, performance (prototype exists)
+* persistent file preallocation (e.g for streaming media, databases)
+
+Features like metadata checksumming have been discussed and planned for
+a bit but no patches exist yet so I'm not sure they're in the near-term
+roadmap.
+
+The big performance win will come with mballoc and delalloc.  CFS has
+been using mballoc for a few years already with Lustre, and IBM + Bull
+did a lot of benchmarking on it.  The reason it isn't in the first set of
+patches is partly a manageability issue, and partly because it doesn't
+directly affect the on-disk format (outside of much better allocation)
+so it isn't critical to get into the first round of changes.  I believe
+Alex is working on a new set of patches right now.
+
+3. Options
+==========
+
+When mounting an ext4 filesystem, the following option are accepted:
+(*) == default
+
+extents			ext4 will use extents to address file data.  The
+			file system will no longer be mountable by ext3.
+
+journal=update		Update the ext4 file system's journal to the current
+			format.
+
+journal=inum		When a journal already exists, this option is ignored.
+			Otherwise, it specifies the number of the inode which
+			will represent the ext4 file system's journal file.
+
+journal_dev=devnum	When the external journal device's major/minor numbers
+			have changed, this option allows the user to specify
+			the new journal location.  The journal device is
+			identified through its new major/minor numbers encoded
+			in devnum.
+
+noload			Don't load the journal on mounting.
+
+data=journal		All data are committed into the journal prior to being
+			written into the main file system.
+
+data=ordered	(*)	All data are forced directly out to the main file
+			system prior to its metadata being committed to the
+			journal.
+
+data=writeback		Data ordering is not preserved, data may be written
+			into the main file system after its metadata has been
+			committed to the journal.
+
+commit=nrsec	(*)	Ext4 can be told to sync all its data and metadata
+			every 'nrsec' seconds. The default value is 5 seconds.
+			This means that if you lose your power, you will lose
+			as much as the latest 5 seconds of work (your
+			filesystem will not be damaged though, thanks to the
+			journaling).  This default value (or any low value)
+			will hurt performance, but it's good for data-safety.
+			Setting it to 0 will have the same effect as leaving
+			it at the default (5 seconds).
+			Setting it to very large values will improve
+			performance.
+
+barrier=1		This enables/disables barriers.  barrier=0 disables
+			it, barrier=1 enables it.
+
+orlov		(*)	This enables the new Orlov block allocator. It is
+			enabled by default.
+
+oldalloc		This disables the Orlov block allocator and enables
+			the old block allocator.  Orlov should have better
+			performance - we'd like to get some feedback if it's
+			the contrary for you.
+
+user_xattr		Enables Extended User Attributes.  Additionally, you
+			need to have extended attribute support enabled in the
+			kernel configuration (CONFIG_EXT4_FS_XATTR).  See the
+			attr(5) manual page and http://acl.bestbits.at/ to
+			learn more about extended attributes.
+
+nouser_xattr		Disables Extended User Attributes.
+
+acl			Enables POSIX Access Control Lists support.
+			Additionally, you need to have ACL support enabled in
+			the kernel configuration (CONFIG_EXT4_FS_POSIX_ACL).
+			See the acl(5) manual page and http://acl.bestbits.at/
+			for more information.
+
+noacl			This option disables POSIX Access Control List
+			support.
+
+reservation
+
+noreservation
+
+bsddf		(*)	Make 'df' act like BSD.
+minixdf			Make 'df' act like Minix.
+
+check=none		Don't do extra checking of bitmaps on mount.
+nocheck
+
+debug			Extra debugging information is sent to syslog.
+
+errors=remount-ro(*)	Remount the filesystem read-only on an error.
+errors=continue		Keep going on a filesystem error.
+errors=panic		Panic and halt the machine if an error occurs.
+
+grpid			Give objects the same group ID as their creator.
+bsdgroups
+
+nogrpid		(*)	New objects have the group ID of their creator.
+sysvgroups
+
+resgid=n		The group ID which may use the reserved blocks.
+
+resuid=n		The user ID which may use the reserved blocks.
+
+sb=n			Use alternate superblock at this location.
+
+quota
+noquota
+grpquota
+usrquota
+
+bh		(*)	ext4 associates buffer heads to data pages to
+nobh			(a) cache disk block mapping information
+			(b) link pages into transaction to provide
+			    ordering guarantees.
+			"bh" option forces use of buffer heads.
+			"nobh" option tries to avoid associating buffer
+			heads (supported only for "writeback" mode).
+
+
+Data Mode
+---------
+There are 3 different data modes:
+
+* writeback mode
+In data=writeback mode, ext4 does not journal data at all.  This mode provides
+a similar level of journaling as that of XFS, JFS, and ReiserFS in its default
+mode - metadata journaling.  A crash+recovery can cause incorrect data to
+appear in files which were written shortly before the crash.  This mode will
+typically provide the best ext4 performance.
+
+* ordered mode
+In data=ordered mode, ext4 only officially journals metadata, but it logically
+groups metadata and data blocks into a single unit called a transaction.  When
+it's time to write the new metadata out to disk, the associated data blocks
+are written first.  In general, this mode performs slightly slower than
+writeback but significantly faster than journal mode.
+
+* journal mode
+data=journal mode provides full data and metadata journaling.  All new data is
+written to the journal first, and then to its final location.
+In the event of a crash, the journal can be replayed, bringing both data and
+metadata into a consistent state.  This mode is the slowest except when data
+needs to be read from and written to disk at the same time where it
+outperforms all others modes.
+
+References
+==========
+
+kernel source:	<file:fs/ext4/>
+		<file:fs/jbd2/>
+
+programs:	http://e2fsprogs.sourceforge.net/
+		http://ext2resize.sourceforge.net
+
+useful links:	http://fedoraproject.org/wiki/ext3-devel
+		http://www.bullopensource.org/ext4/

Documentation/filesystems/udf.txt

@@ -7,8 +7,17 @@ If you encounter problems with reading UDF discs using this driver,
 please report them to linux_udf@hpesjro.fc.hp.com, which is the
 developer's list.
 
-Write support requires a block driver which supports writing. The current
-scsi and ide cdrom drivers do not support writing.
+Write support requires a block driver which supports writing.  Currently
+dvd+rw drives and media support true random sector writes, and so a udf
+filesystem on such devices can be directly mounted read/write.  CD-RW
+media however, does not support this.  Instead the media can be formatted
+for packet mode using the utility cdrwtool, then the pktcdvd driver can
+be bound to the underlying cd device to provide the required buffering
+and read-modify-write cycles to allow the filesystem random sector writes
+while providing the hardware with only full packet writes.  While not
+required for dvd+rw media, use of the pktcdvd driver often enhances
+performance due to very poor read-modify-write support supplied internally
+by drive firmware.
 
 -------------------------------------------------------------------------------
 The following mount options are supported:

Documentation/hwmon/adm9240

@@ -24,7 +24,7 @@ Authors:
     Frodo Looijaard <frodol@dds.nl>,
     Philip Edelbrock <phil@netroedge.com>,
     Michiel Rook <michiel@grendelproject.nl>,
-    Grant Coady <gcoady@gmail.com> with guidance
+    Grant Coady <gcoady.lk@gmail.com> with guidance
         from Jean Delvare <khali@linux-fr.org>
 
 Interface

Documentation/hwmon/f71805f

@@ -17,7 +17,7 @@ Thanks to Kris Chen from Fintek for answering technical questions and
 providing additional documentation.
 
 Thanks to Chris Lin from Jetway for providing wiring schematics and
-anwsering technical questions.
+answering technical questions.
 
 
 Description

Documentation/hwmon/k8temp

@@ -2,7 +2,7 @@ Kernel driver k8temp
 ====================
 
 Supported chips:
-  * AMD K8 CPU
+  * AMD Athlon64/FX or Opteron CPUs
     Prefix: 'k8temp'
     Addresses scanned: PCI space
     Datasheet: http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/32559.pdf
@@ -13,10 +13,13 @@ Contact: Rudolf Marek <r.marek@sh.cvut.cz>
 Description
 -----------
 
-This driver permits reading temperature sensor(s) embedded inside AMD K8 CPUs.
-Official documentation says that it works from revision F of K8 core, but
-in fact it seems to be implemented for all revisions of K8 except the first
-two revisions (SH-B0 and SH-B3).
+This driver permits reading temperature sensor(s) embedded inside AMD K8
+family CPUs (Athlon64/FX, Opteron). Official documentation says that it works
+from revision F of K8 core, but in fact it seems to be implemented for all
+revisions of K8 except the first two revisions (SH-B0 and SH-B3).
+
+Please note that you will need at least lm-sensors 2.10.1 for proper userspace
+support.
 
 There can be up to four temperature sensors inside single CPU. The driver
 will auto-detect the sensors and will display only temperatures from

Documentation/hwmon/smsc47m1

@@ -2,12 +2,14 @@ Kernel driver smsc47m1
 ======================
 
 Supported chips:
-  * SMSC LPC47B27x, LPC47M10x, LPC47M13x, LPC47M14x, LPC47M15x and LPC47M192
+  * SMSC LPC47B27x, LPC47M112, LPC47M10x, LPC47M13x, LPC47M14x,
+    LPC47M15x and LPC47M192
     Addresses scanned: none, address read from Super I/O config space
     Prefix: 'smsc47m1'
     Datasheets:
         http://www.smsc.com/main/datasheets/47b27x.pdf
         http://www.smsc.com/main/datasheets/47m10x.pdf
+        http://www.smsc.com/main/datasheets/47m112.pdf
         http://www.smsc.com/main/tools/discontinued/47m13x.pdf
         http://www.smsc.com/main/datasheets/47m14x.pdf
         http://www.smsc.com/main/tools/discontinued/47m15x.pdf

Documentation/hwmon/w83627ehf

@@ -26,7 +26,7 @@ fan control mode).
 Temperatures are measured in degrees Celsius and measurement resolution is 1
 degC for temp1 and 0.5 degC for temp2 and temp3. An alarm is triggered when
 the temperature gets higher than high limit; it stays on until the temperature
-falls below the Hysteresis value.
+falls below the hysteresis value.
 
 Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
 triggered if the rotation speed has dropped below a programmable limit. Fan
@@ -67,9 +67,9 @@ Thermal Cruise mode
 
 If the temperature is in the range defined by:
 
-pwm[1-4]_target    - set target temperature, unit millidegree Celcius
+pwm[1-4]_target    - set target temperature, unit millidegree Celsius
 		     (range 0 - 127000)
-pwm[1-4]_tolerance - tolerance, unit millidegree Celcius (range 0 - 15000)
+pwm[1-4]_tolerance - tolerance, unit millidegree Celsius (range 0 - 15000)
 
 there are no changes to fan speed. Once the temperature leaves the interval,
 fan speed increases (temp is higher) or decreases if lower than desired.

Documentation/ibm-acpi.txt

@@ -30,9 +30,10 @@ detailed description):
 	- ACPI sounds
 	- temperature sensors
 	- Experimental: embedded controller register dump
-	- Experimental: LCD brightness control
-	- Experimental: volume control
+	- LCD brightness control
+	- Volume control
 	- Experimental: fan speed, fan enable/disable
+	- Experimental: WAN enable and disable
 
 A compatibility table by model and feature is maintained on the web
 site, http://ibm-acpi.sf.net/. I appreciate any success or failure
@@ -52,40 +53,7 @@ Installation
 
 If you are compiling this driver as included in the Linux kernel
 sources, simply enable the CONFIG_ACPI_IBM option (Power Management /
-ACPI / IBM ThinkPad Laptop Extras). The rest of this section describes
-how to install this driver when downloaded from the web site.
-
-First, you need to get a kernel with ACPI support up and running.
-Please refer to http://acpi.sourceforge.net/ for help with this
-step. How successful you will be depends a lot on you ThinkPad model,
-the kernel you are using and any additional patches applied. The
-kernel provided with your distribution may not be good enough. I
-needed to compile a 2.6.7 kernel with the 20040715 ACPI patch to get
-ACPI working reliably on my ThinkPad X40. Old ThinkPad models may not
-be supported at all.
-
-Assuming you have the basic ACPI support working (e.g. you can see the
-/proc/acpi directory), follow the following steps to install this
-driver:
-
-	- unpack the archive:
-
-		tar xzvf ibm-acpi-x.y.tar.gz; cd ibm-acpi-x.y
-
-	- compile the driver:
-
-		make
-
-	- install the module in your kernel modules directory:
-
-		make install
-
-	- load the module:
-
-		modprobe ibm_acpi
-
-After loading the module, check the "dmesg" output for any error messages.
-
+ACPI / IBM ThinkPad Laptop Extras).
 
 Features
 --------
@@ -523,13 +491,8 @@ registers contain the current battery capacity, etc. If you experiment
 with this, do send me your results (including some complete dumps with
 a description of the conditions when they were taken.)
 
-EXPERIMENTAL: LCD brightness control -- /proc/acpi/ibm/brightness
------------------------------------------------------------------
-
-This feature is marked EXPERIMENTAL because the implementation
-directly accesses hardware registers and may not work as expected. USE
-WITH CAUTION! To use this feature, you need to supply the
-experimental=1 parameter when loading the module.
+LCD brightness control -- /proc/acpi/ibm/brightness
+---------------------------------------------------
 
 This feature allows software control of the LCD brightness on ThinkPad
 models which don't have a hardware brightness slider. The available
@@ -542,13 +505,8 @@ commands are:
 The <level> number range is 0 to 7, although not all of them may be
 distinct. The current brightness level is shown in the file.
 
-EXPERIMENTAL: Volume control -- /proc/acpi/ibm/volume
------------------------------------------------------
-
-This feature is marked EXPERIMENTAL because the implementation
-directly accesses hardware registers and may not work as expected. USE
-WITH CAUTION! To use this feature, you need to supply the
-experimental=1 parameter when loading the module.
+Volume control -- /proc/acpi/ibm/volume
+---------------------------------------
 
 This feature allows volume control on ThinkPad models which don't have
 a hardware volume knob. The available commands are:
@@ -611,6 +569,23 @@ with the following command:
 
 	echo 'level <level>' > /proc/acpi/ibm/thermal
 
+EXPERIMENTAL: WAN -- /proc/acpi/ibm/wan
+---------------------------------------
+
+This feature is marked EXPERIMENTAL because the implementation
+directly accesses hardware registers and may not work as expected. USE
+WITH CAUTION! To use this feature, you need to supply the
+experimental=1 parameter when loading the module.
+
+This feature shows the presence and current state of a WAN (Sierra
+Wireless EV-DO) device. If WAN is installed, the following commands can
+be used:
+
+	echo enable > /proc/acpi/ibm/wan
+	echo disable > /proc/acpi/ibm/wan
+
+It was tested on a Lenovo Thinkpad X60. It should probably work on other
+Thinkpad models which come with this module installed.
 
 Multiple Commands, Module Parameters
 ------------------------------------

Documentation/input/xpad.txt

@@ -3,20 +3,37 @@ xpad - Linux USB driver for X-Box gamepads
 This is the very first release of a driver for X-Box gamepads.
 Basically, this was hacked away in just a few hours, so don't expect
 miracles.
+
 In particular, there is currently NO support for the rumble pack.
 You won't find many ff-aware linux applications anyway.
 
 
-0. Status
----------
+0. Notes
+--------
+
+Driver updated for kernel 2.6.17.11. (Based on a patch for 2.6.11.4.)
 
-For now, this driver has only been tested on just one Linux-Box.
-This one is running a 2.4.18 kernel with usb-uhci on an amd athlon 600.
+The number of buttons/axes reported varies based on 3 things:
+- if you are using a known controller
+- if you are using a known dance pad
+- if using an unknown device (one not listed below), what you set in the
+  module configuration for "Map D-PAD to buttons rather than axes for unknown
+  pads" (module option dpad_to_buttons)
 
-The jstest-program from joystick-1.2.15 (jstest-version 2.1.0) reports
-8 axes and 10 buttons.
+If you set dpad_to_buttons to 0 and you are using an unknown device (one
+not listed below), the driver will map the directional pad to axes (X/Y),
+if you said N it will map the d-pad to buttons, which is needed for dance
+style games to function correctly.  The default is Y.
+
+dpad_to_buttons has no effect for known pads.
+
+0.1 Normal Controllers
+----------------------
+With a normal controller, the directional pad is mapped to its own X/Y axes.
+The jstest-program from joystick-1.2.15 (jstest-version 2.1.0) will report 8
+axes and 10 buttons.
 
-Alls 8 axes work, though they all have the same range (-32768..32767)
+All 8 axes work, though they all have the same range (-32768..32767)
 and the zero-setting is not correct for the triggers (I don't know if that
 is some limitation of jstest, since the input device setup should be fine. I
 didn't have a look at jstest itself yet).
@@ -30,16 +47,50 @@ in game functionality were OK. However, I find it rather difficult to
 play first person shooters with a pad. Your mileage may vary.
 
 
+0.2 Xbox Dance Pads
+-------------------
+When using a known dance pad, jstest will report 6 axes and 14 buttons.
+
+For dance style pads (like the redoctane pad) several changes
+have been made.  The old driver would map the d-pad to axes, resulting
+in the driver being unable to report when the user was pressing both
+left+right or up+down, making DDR style games unplayable.
+
+Known dance pads automatically map the d-pad to buttons and will work
+correctly out of the box.
+
+If your dance pad is recognized by the driver but is using axes instead
+of buttons, see section 0.3 - Unknown Controllers
+
+I've tested this with Stepmania, and it works quite well.
+
+
+0.3 Unkown Controllers
+----------------------
+If you have an unkown xbox controller, it should work just fine with
+the default settings.
+
+HOWEVER if you have an unknown dance pad not listed below, it will not
+work UNLESS you set "dpad_to_buttons" to 1 in the module configuration.
+
+PLEASE if you have an unkown controller, email Dom <binary1230@yahoo.com> with
+a dump from /proc/bus/usb and a description of the pad (manufacturer, country,
+whether it is a dance pad or normal controller) so that we can add your pad
+to the list of supported devices, ensuring that it will work out of the
+box in the future.
+
+
 1. USB adapter
 --------------
 
 Before you can actually use the driver, you need to get yourself an
-adapter cable to connect the X-Box controller to your Linux-Box.
+adapter cable to connect the X-Box controller to your Linux-Box. You
+can buy these online fairly cheap, or build your own.
 
-Such a cable is pretty easy to build. The Controller itself is a USB compound
-device (a hub with three ports for two expansion slots and the controller
-device) with the only difference in a nonstandard connector (5 pins vs. 4 on
-standard USB connector).
+Such a cable is pretty easy to build. The Controller itself is a USB
+compound device (a hub with three ports for two expansion slots and
+the controller device) with the only difference in a nonstandard connector
+(5 pins vs. 4 on standard USB connector).
 
 You just need to solder a USB connector onto the cable and keep the
 yellow wire unconnected. The other pins have the same order on both
@@ -51,36 +102,36 @@ original one. You can buy an extension cable and cut that instead. That way,
 you can still use the controller with your X-Box, if you have one ;)
 
 
-2. driver installation
+2. Driver Installation
 ----------------------
 
 Once you have the adapter cable and the controller is connected, you need
 to load your USB subsystem and should cat /proc/bus/usb/devices.
 There should be an entry like the one at the end [4].
 
-Currently (as of version 0.0.4), the following three devices are included:
+Currently (as of version 0.0.6), the following devices are included:
  original Microsoft XBOX controller (US), vendor=0x045e, product=0x0202
+ smaller  Microsoft XBOX controller (US), vendor=0x045e, product=0x0289
  original Microsoft XBOX controller (Japan), vendor=0x045e, product=0x0285
  InterAct PowerPad Pro (Germany), vendor=0x05fd, product=0x107a
+ RedOctane Xbox Dance Pad (US), vendor=0x0c12, product=0x8809
 
-If you have another controller that is not listed above and is not recognized
-by the driver, please drop me a line with the appropriate info (that is, include
-the name, vendor and product ID, as well as the country where you bought it;
-sending the whole dump out of /proc/bus/usb/devices along would be even better).
+The driver should work with xbox pads not listed above as well, however
+you will need to do something extra for dance pads to work.
 
-In theory, the driver should work with other controllers than mine
-(InterAct PowerPad pro, bought in Germany) just fine, but I cannot test this
-for I only have this one controller.
+If you have a controller not listed above, see 0.3 - Unknown Controllers
 
 If you compiled and installed the driver, test the functionality:
 > modprobe xpad
 > modprobe joydev
 > jstest /dev/js0
 
-There should be a single line showing 18 inputs (8 axes, 10 buttons), and
-it's values should change if you move the sticks and push the buttons.
+If you're using a normal controller, there should be a single line showing
+18 inputs (8 axes, 10 buttons), and its values should change if you move
+the sticks and push the buttons.  If you're using a dance pad, it should
+show 20 inputs (6 axes, 14 buttons).
 
-It works? Voila, your done ;)
+It works? Voila, you're done ;)
 
 
 3. Thanks
@@ -111,6 +162,22 @@ I:  If#= 0 Alt= 0 #EPs= 2 Cls=58(unk. ) Sub=42 Prot=00 Driver=(none)
 E:  Ad=81(I) Atr=03(Int.) MxPS=  32 Ivl= 10ms
 E:  Ad=02(O) Atr=03(Int.) MxPS=  32 Ivl= 10ms
 
+5. /proc/bus/usb/devices - dump from Redoctane Xbox Dance Pad (US):
+
+T:  Bus=01 Lev=02 Prnt=09 Port=00 Cnt=01 Dev#= 10 Spd=12  MxCh= 0
+D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
+P:  Vendor=0c12 ProdID=8809 Rev= 0.01
+S:  Product=XBOX DDR
+C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
+I:  If#= 0 Alt= 0 #EPs= 2 Cls=58(unk. ) Sub=42 Prot=00 Driver=xpad
+E:  Ad=82(I) Atr=03(Int.) MxPS=  32 Ivl=4ms
+E:  Ad=02(O) Atr=03(Int.) MxPS=  32 Ivl=4ms
+
 -- 
 Marko Friedemann <mfr@bmx-chemnitz.de>
 2002-07-16
+ - original doc
+
+Dominic Cerquetti <binary1230@yahoo.com>
+2005-03-19
+ - added stuff for dance pads, new d-pad->axes mappings

Documentation/kernel-doc-nano-HOWTO.txt

@@ -17,7 +17,7 @@ are:
   special place-holders for where the extracted documentation should
   go.
 
-- scripts/docproc.c
+- scripts/basic/docproc.c
 
   This is a program for converting SGML template files into SGML
   files. When a file is referenced it is searched for symbols

Documentation/kernel-parameters.txt

@@ -164,6 +164,10 @@ and is between 256 and 4096 characters. It is defined in the file
 	acpi_skip_timer_override [HW,ACPI]
 			Recognize and ignore IRQ0/pin2 Interrupt Override.
 			For broken nForce2 BIOS resulting in XT-PIC timer.
+	acpi_use_timer_override [HW,ACPI}
+			Use timer override. For some broken Nvidia NF5 boards
+			that require a timer override, but don't have
+			HPET
 
 	acpi_dbg_layer=	[HW,ACPI]
 			Format: <int>
@@ -1231,6 +1235,11 @@ and is between 256 and 4096 characters. It is defined in the file
 				machine check when some devices' config space
 				is read. But various workarounds are disabled
 				and some IOMMU drivers will not work.
+		bfsort		Sort PCI devices into breadth-first order.
+				This sorting is done to get a device
+				order compatible with older (<= 2.4) kernels.
+		nobfsort	Don't sort PCI devices into breadth-first order.
+
 	pcmv=		[HW,PCMCIA] BadgePAD 4
 
 	pd.		[PARIDE]

Documentation/kprobes.txt

@@ -442,9 +442,10 @@ static int __init kprobe_init(void)
 	kp.fault_handler = handler_fault;
 	kp.symbol_name = "do_fork";
 
-	if ((ret = register_kprobe(&kp) < 0)) {
+	ret = register_kprobe(&kp);
+	if (ret < 0) {
 		printk("register_kprobe failed, returned %d\n", ret);
-		return -1;
+		return ret;
 	}
 	printk("kprobe registered\n");
 	return 0;

Documentation/lockdep-design.txt

@@ -50,10 +50,10 @@ The bit position indicates hardirq, softirq, hardirq-read,
 softirq-read respectively, and the character displayed in each
 indicates:
 
-   '.'	 acquired while irqs enabled
+   '.'  acquired while irqs disabled
    '+'  acquired in irq context
-   '-'  acquired in process context with irqs disabled
-   '?'  read-acquired both with irqs enabled and in irq context
+   '-'  acquired with irqs enabled
+   '?' read acquired in irq context with irqs enabled.
 
 Unused mutexes cannot be part of the cause of an error.
 

Documentation/memory-barriers.txt

@@ -1016,7 +1016,7 @@ There are some more advanced barrier functions:
 
  (*) set_mb(var, value)
 
-     This assigns the value to the variable and then inserts at least a write
+     This assigns the value to the variable and then inserts a full memory
      barrier after it, depending on the function.  It isn't guaranteed to
      insert anything more than a compiler barrier in a UP compilation.
 
@@ -1898,7 +1898,7 @@ queue before processing any further requests:
 	smp_wmb();
 	<A:modify v=2>	<C:busy>
 			<C:queue v=2>
-	p = &b;		q = p;
+	p = &v;		q = p;
 			<D:request p>
 	<B:modify p=&v>	<D:commit p=&v>
 		  	<D:read p>

Documentation/mips/time.README

@@ -38,19 +38,14 @@ The new time code provide the following services:
 
   a) Implements functions required by Linux common code:
 	time_init
-	do_gettimeofday
-	do_settimeofday
 
   b) provides an abstraction of RTC and null RTC implementation as default.
 	extern unsigned long (*rtc_get_time)(void);
 	extern int (*rtc_set_time)(unsigned long);
 
-  c) a set of gettimeoffset functions for different CPUs and different
-     needs.
-
-  d) high-level and low-level timer interrupt routines where the timer 
-     interrupt source  may or may not be the CPU timer.  The high-level 
-     routine is dispatched through do_IRQ() while the low-level is 
+  c) high-level and low-level timer interrupt routines where the timer
+     interrupt source  may or may not be the CPU timer.  The high-level
+     routine is dispatched through do_IRQ() while the low-level is
      dispatched in assemably code (usually int-handler.S)
 
 
@@ -63,7 +58,7 @@ the following functions or values:
   a) board_time_init - a function pointer.  Invoked at the beginnig of
      time_init().  It is optional.
 	1. (optional) set up RTC routines
-	2. (optional) calibrate and set the mips_counter_frequency
+	2. (optional) calibrate and set the mips_hpt_frequency
 
   b) plat_timer_setup - a function pointer.  Invoked at the end of time_init()
 	1. (optional) over-ride any decisions made in time_init()
@@ -72,9 +67,8 @@ the following functions or values:
 
   c) (optional) board-specific RTC routines.
 
-  d) (optional) mips_counter_frequency - It must be definied if the board
-     is using CPU counter for timer interrupt or it is using fixed rate
-     gettimeoffset().
+  d) (optional) mips_hpt_frequency - It must be definied if the board
+     is using CPU counter for timer interrupt.
 
 
 PORTING GUIDE
@@ -89,22 +83,12 @@ Step 1: decide how you like to implement the time services.
      If the answer is no, you need a timer to provide the timer interrupt
      at 100 HZ speed.
 
-     You cannot use the fast gettimeoffset functions, i.e.,
-
-	unsigned long fixed_rate_gettimeoffset(void);
-	unsigned long calibrate_div32_gettimeoffset(void);
-	unsigned long calibrate_div64_gettimeoffset(void);
-
-    You can use null_gettimeoffset() will gives the same time resolution as
-    jiffy.  Or you can implement your own gettimeoffset (probably based on 
-    some ad hoc hardware on your machine.)
-
   c) The following sub steps assume your CPU has counter register.
      Do you plan to use the CPU counter register as the timer interrupt
      or use an exnternal timer?
 
      In order to use CPU counter register as the timer interrupt source, you
-     must know the counter speed (mips_counter_frequency).  It is usually the
+     must know the counter speed (mips_hpt_frequency).  It is usually the
      same as the CPU speed or an integral divisor of it.
 
   d) decide on whether you want to use high-level or low-level timer
@@ -121,10 +105,10 @@ Step 3: implement rtc routines, board_time_init() and plat_timer_setup()
   if needed.
 
   board_time_init() -
-  	a) (optional) set up RTC routines, 
-        b) (optional) calibrate and set the mips_counter_frequency
- 	    (only needed if you intended to use fixed_rate_gettimeoffset
- 	     or use cpu counter as timer interrupt source)
+  	a) (optional) set up RTC routines,
+        b) (optional) calibrate and set the mips_hpt_frequency
+ 	    (only needed if you intended to use cpu counter as timer interrupt
+ 	     source)
 
   plat_timer_setup() -
  	a) (optional) over-write any choices made above by time_init().
@@ -154,8 +138,8 @@ for some of the functions in time.c.
 For example, you may define your own timer interrupt routine, which does
 some of its own processing and then calls timer_interrupt().
 
-You can also over-ride any of the built-in functions (gettimeoffset,
-RTC routines and/or timer interrupt routine).
+You can also over-ride any of the built-in functions (RTC routines
+and/or timer interrupt routine).
 
 
 PORTING NOTES FOR SMP
@@ -187,10 +171,3 @@ You need to decide on your timer interrupt sources.
 
 	You can also do the low-level version of those interrupt routines,
 	following similar dispatching routes described above.
-
-Note about do_gettimeoffset():
-
-  It is very likely the CPU counter registers are not sync'ed up in a SMP box.
-  Therefore you cannot really use the many of the existing routines that
-  are based on CPU counter.  You should wirte your own gettimeoffset rouinte
-  if you want intra-jiffy resolution.

Documentation/power/interface.txt

@@ -30,6 +30,17 @@ testing). The system will support either 'firmware' or 'platform', and
 that is known a priori. But, the user may choose 'shutdown' or
 'reboot' as alternatives. 
 
+Additionally, /sys/power/disk can be used to turn on one of the two testing
+modes of the suspend-to-disk mechanism: 'testproc' or 'test'.  If the
+suspend-to-disk mechanism is in the 'testproc' mode, writing 'disk' to
+/sys/power/state will cause the kernel to disable nonboot CPUs and freeze
+tasks, wait for 5 seconds, unfreeze tasks and enable nonboot CPUs.  If it is
+in the 'test' mode, writing 'disk' to /sys/power/state will cause the kernel
+to disable nonboot CPUs and freeze tasks, shrink memory, suspend devices, wait
+for 5 seconds, resume devices, unfreeze tasks and enable nonboot CPUs.  Then,
+we are able to look in the log messages and work out, for example, which code
+is being slow and which device drivers are misbehaving.
+
 Reading from this file will display what the mode is currently set
 to. Writing to this file will accept one of
 
@@ -37,6 +48,8 @@ to. Writing to this file will accept one of
        'platform'
        'shutdown'
        'reboot'
+       'testproc'
+       'test'
 
 It will only change to 'firmware' or 'platform' if the system supports
 it. 

Documentation/s390/CommonIO

@@ -66,7 +66,7 @@ Command line parameters
 
   When a device is un-ignored, device recognition and sensing is performed and 
   the device driver will be notified if possible, so the device will become
-  available to the system.
+  available to the system. Note that un-ignoring is performed asynchronously.
 
   You can also add ranges of devices to be ignored by piping to 
   /proc/cio_ignore; "add <device range>, <device range>, ..." will ignore the

Documentation/s390/cds.txt

@@ -174,14 +174,10 @@ read_dev_chars() - Read Device Characteristics
 
 This routine returns the characteristics for the device specified.
 
-The function is meant to be called with an irq handler in place; that is,
+The function is meant to be called with the device already enabled; that is,
 at earliest during set_online() processing.
 
-While the request is processed synchronously, the device interrupt
-handler is called for final ending status. In case of error situations the
-interrupt handler may recover appropriately. The device irq handler can
-recognize the corresponding interrupts by the interruption parameter be
-0x00524443. The ccw_device must not be locked prior to calling read_dev_chars().
+The ccw_device must not be locked prior to calling read_dev_chars().
 
 The function may be called enabled or disabled.
 
@@ -410,26 +406,7 @@ individual flag meanings.
 
 Usage Notes :
 
-Prior to call ccw_device_start() the device driver must assure disabled state,
-i.e. the I/O mask value in the PSW must be disabled. This can be accomplished
-by calling local_save_flags( flags). The current PSW flags are preserved and
-can be restored by local_irq_restore( flags) at a later time.
-
-If the device driver violates this rule while running in a uni-processor
-environment an interrupt might be presented prior to the ccw_device_start()
-routine returning to the device driver main path. In this case we will end in a
-deadlock situation as the interrupt handler will try to obtain the irq
-lock the device driver still owns (see below) !
-
-The driver must assure to hold the device specific lock. This can be
-accomplished by
-
-(i)  spin_lock(get_ccwdev_lock(cdev)), or
-(ii) spin_lock_irqsave(get_ccwdev_lock(cdev), flags)
-
-Option (i) should be used if the calling routine is running disabled for
-I/O interrupts (see above) already. Option (ii) obtains the device gate und
-puts the CPU into I/O disabled state by preserving the current PSW flags.
+ccw_device_start() must be called disabled and with the ccw device lock held.
 
 The device driver is allowed to issue the next ccw_device_start() call from
 within its interrupt handler already. It is not required to schedule a
@@ -488,7 +465,7 @@ int ccw_device_resume(struct ccw_device *cdev);
 
 cdev - ccw_device the resume operation is requested for
 
-The resume_IO() function returns:
+The ccw_device_resume() function returns:
 
         0  - suspended channel program is resumed
 -EBUSY     - status pending
@@ -507,6 +484,8 @@ a long-running channel program or the device might require to initially issue
 a halt subchannel (HSCH) I/O command. For those purposes the ccw_device_halt()
 command is provided.
 
+ccw_device_halt() must be called disabled and with the ccw device lock held.
+
 int ccw_device_halt(struct ccw_device *cdev,
                     unsigned long intparm);
 
@@ -517,7 +496,7 @@ intparm : interruption parameter; value is only used if no I/O
 
 The ccw_device_halt() function returns :
 
-      0 - successful completion or request successfully initiated
+      0 - request successfully initiated
 -EBUSY  - the device is currently busy, or status pending.
 -ENODEV - cdev invalid.
 -EINVAL - The device is not operational or the ccw device is not online.
@@ -533,6 +512,23 @@ can then perform an appropriate action. Prior to interrupt of an outstanding
 read to a network device (with or without PCI flag) a ccw_device_halt()
 is required to end the pending operation.
 
+ccw_device_clear() - Terminage I/O Request Processing
+
+In order to terminate all I/O processing at the subchannel, the clear subchannel
+(CSCH) command is used. It can be issued via ccw_device_clear().
+
+ccw_device_clear() must be called disabled and with the ccw device lock held.
+
+int ccw_device_clear(struct ccw_device *cdev, unsigned long intparm);
+
+cdev:	 ccw_device the clear operation is requested for
+intparm: interruption parameter (see ccw_device_halt())
+
+The ccw_device_clear() function returns:
+
+      0 - request successfully initiated
+-ENODEV - cdev invalid
+-EINVAL - The device is not operational or the ccw device is not online.
 
 Miscellaneous Support Routines
 

Documentation/s390/driver-model.txt

@@ -239,6 +239,9 @@ status - Can be 'online' or 'offline'.
 
 type - The physical type of the channel path.
 
+shared - Whether the channel path is shared.
+
+cmg - The channel measurement group.
 
 3. System devices
 -----------------

Documentation/sound/alsa/ALSA-Configuration.txt

@@ -753,7 +753,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     position_fix - Fix DMA pointer (0 = auto, 1 = none, 2 = POSBUF, 3 = FIFO size)
     single_cmd  - Use single immediate commands to communicate with
 		codecs (for debugging only)
-    disable_msi - Disable Message Signaled Interrupt (MSI)
+    enable_msi	- Enable Message Signaled Interrupt (MSI) (default = off)
 
     This module supports one card and autoprobe.
 

Documentation/sysctl/kernel.txt

@@ -86,7 +86,7 @@ valid for 30 seconds.
 core_pattern:
 
 core_pattern is used to specify a core dumpfile pattern name.
-. max length 64 characters; default value is "core"
+. max length 128 characters; default value is "core"
 . core_pattern is used as a pattern template for the output filename;
   certain string patterns (beginning with '%') are substituted with
   their actual values.
@@ -105,6 +105,9 @@ core_pattern is used to specify a core dumpfile pattern name.
 	%h	hostname
 	%e	executable filename
 	%<OTHER> both are dropped
+. If the first character of the pattern is a '|', the kernel will treat
+  the rest of the pattern as a command to run.  The core dump will be
+  written to the standard input of that program instead of to a file.
 
 ==============================================================
 

Documentation/usb/usb-serial.txt

@@ -428,12 +428,6 @@ Options supported:
   See http://www.uuhaus.de/linux/palmconnect.html for up-to-date
   information on this driver.
 
-AIRcable USB Dongle Bluetooth driver
-  If there is the cdc_acm driver loaded in the system, you will find that the
-  cdc_acm claims the device before AIRcable can. This is simply corrected
-  by unloading both modules and then loading the aircable module before
-  cdc_acm module
-
 Generic Serial driver
 
   If your device is not one of the above listed devices, compatible with

Documentation/video4linux/CARDLIST.cx88

@@ -51,7 +51,7 @@
  50 -> NPG Tech Real TV FM Top 10                          [14f1:0842]
  51 -> WinFast DTV2000 H                                   [107d:665e]
  52 -> Geniatech DVB-S                                     [14f1:0084]
- 53 -> Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T  [0070:1404]
+ 53 -> Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T  [0070:1404,0070:1400,0070:1401,0070:1402]
  54 -> Norwood Micro TV Tuner
  55 -> Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann OEM  [c180:c980]
  56 -> Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder   [0070:9600,0070:9601,0070:9602]

Documentation/watchdog/src/watchdog-simple.c

@@ -1,4 +1,6 @@
+#include <stdio.h>
 #include <stdlib.h>
+#include <unistd.h>
 #include <fcntl.h>
 
 int main(int argc, const char *argv[]) {

MAINTAINERS

@@ -493,7 +493,7 @@ S:	Maintained
 
 BFS FILE SYSTEM
 P:	Tigran A. Aivazian
-M:	tigran@veritas.com
+M:	tigran@aivazian.fsnet.co.uk
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 
@@ -905,7 +905,8 @@ P:	David Teigland
 M:	teigland@redhat.com
 L:	cluster-devel@redhat.com
 W:	http://sources.redhat.com/cluster/
-T:	git kernel.org:/pub/scm/linux/kernel/git/steve/gfs-2.6.git
+T:	git kernel.org:/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes.git
+T:	git kernel.org:/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw.git
 S:	Supported
 
 DAVICOM FAST ETHERNET (DMFE) NETWORK DRIVER
@@ -1188,7 +1189,8 @@ P:	Steven Whitehouse
 M:	swhiteho@redhat.com
 L:	cluster-devel@redhat.com
 W:	http://sources.redhat.com/cluster/
-T:	git kernel.org:/pub/scm/linux/kernel/git/steve/gfs-2.6.git
+T:	git kernel.org:/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes.git
+T:	git kernel.org:/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw.git
 S:	Supported
 
 GIGASET ISDN DRIVERS
@@ -1511,7 +1513,7 @@ S:	Maintained
 
 INTEL IA32 MICROCODE UPDATE SUPPORT
 P:	Tigran Aivazian
-M:	tigran@veritas.com
+M:	tigran@aivazian.fsnet.co.uk
 S:	Maintained
 
 INTEL IXP4XX RANDOM NUMBER GENERATOR SUPPORT
@@ -1666,6 +1668,12 @@ M:	sct@redhat.com, akpm@osdl.org
 L:	ext2-devel@lists.sourceforge.net
 S:	Maintained
 
+K8TEMP HARDWARE MONITORING DRIVER
+P:	Rudolf Marek
+M:	r.marek@assembler.cz
+L:	lm-sensors@lm-sensors.org
+S:	Maintained
+
 KCONFIG
 P:	Roman Zippel
 M:	zippel@linux-m68k.org
@@ -1996,6 +2004,13 @@ M:	rubini@ipvvis.unipv.it
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 
+MSI LAPTOP SUPPORT
+P:	Lennart Poettering
+M:	mzxreary@0pointer.de
+L:	https://tango.0pointer.de/mailman/listinfo/s270-linux
+W:	http://0pointer.de/lennart/tchibo.html
+S:	Maintained
+
 MTRR AND SIMILAR SUPPORT [i386]
 P:	Richard Gooch
 M:	rgooch@atnf.csiro.au
@@ -2003,8 +2018,11 @@ L:	linux-kernel@vger.kernel.org
 W:	http://www.atnf.csiro.au/~rgooch/linux/kernel-patches.html
 S:	Maintained
 
-MULTIMEDIA CARD (MMC) SUBSYSTEM
-S:	Orphan
+MULTIMEDIA CARD (MMC) AND SECURE DIGITAL (SD) SUBSYSTEM
+P:	Pierre Ossman
+M:	drzeus-mmc@drzeus.cx
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
 
 MULTISOUND SOUND DRIVER
 P:	Andrew Veliath
@@ -2040,11 +2058,13 @@ P:	Marc Boucher
 P:	James Morris
 P:	Harald Welte
 P:	Jozsef Kadlecsik
-M:	coreteam@netfilter.org
+P:	Patrick McHardy
+M:	kaber@trash.net
+L:	netfilter-devel@lists.netfilter.org
+L:	netfilter@lists.netfilter.org
+L:	coreteam@netfilter.org
 W:	http://www.netfilter.org/
 W:	http://www.iptables.org/
-L:	netfilter@lists.netfilter.org
-L:	netfilter-devel@lists.netfilter.org
 S:	Supported
 
 NETLABEL
@@ -2295,8 +2315,8 @@ T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
 S:	Supported
 
 PCI HOTPLUG CORE
-P:	Greg Kroah-Hartman
-M:	gregkh@suse.de
+P: 	Kristen Carlson Accardi
+M:	kristen.c.accardi@intel.com
 S:	Supported
 
 PCI HOTPLUG COMPAQ DRIVER
@@ -3052,6 +3072,13 @@ L:	video4linux-list@redhat.com
 W:	http://www.linux-projects.org
 S:	Maintained
 
+USB GADGET/PERIPHERAL SUBSYSTEM
+P:	David Brownell
+M:	dbrownell@users.sourceforge.net
+L:	linux-usb-devel@lists.sourceforge.net
+W:	http://www.linux-usb.org/gadget
+S:	Maintained
+
 USB HID/HIDBP DRIVERS
 P:	Vojtech Pavlik
 M:	vojtech@suse.cz
@@ -3235,10 +3262,11 @@ L:	linux-usb-users@lists.sourceforge.net
 L:	linux-usb-devel@lists.sourceforge.net
 S:	Maintained
 
-USB "USBNET" DRIVER
+USB "USBNET" DRIVER FRAMEWORK
 P:	David Brownell
 M:	dbrownell@users.sourceforge.net
 L:	linux-usb-devel@lists.sourceforge.net
+W:	http://www.linux-usb.org/usbnet
 S:	Maintained
 
 USB W996[87]CF DRIVER

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 19
-EXTRAVERSION =-rc1
+EXTRAVERSION =-rc6
 NAME=Avast! A bilge rat!
 
 # *DOCUMENTATION*
@@ -499,6 +499,7 @@ endif
 
 ifdef CONFIG_UNWIND_INFO
 CFLAGS		+= -fasynchronous-unwind-tables
+LDFLAGS_vmlinux	+= --eh-frame-hdr
 endif
 
 ifdef CONFIG_DEBUG_INFO
@@ -741,6 +742,9 @@ endif # ifdef CONFIG_KALLSYMS
 
 # vmlinux image - including updated kernel symbols
 vmlinux: $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) $(kallsyms.o) FORCE
+ifdef CONFIG_HEADERS_CHECK
+	$(Q)$(MAKE) -f $(srctree)/Makefile headers_check
+endif
 	$(call if_changed_rule,vmlinux__)
 	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost $@
 	$(Q)rm -f .old_version
@@ -932,7 +936,7 @@ headers_install_all: include/linux/version.h scripts_basic FORCE
 
 PHONY += headers_install
 headers_install: include/linux/version.h scripts_basic FORCE
-	@if [ ! -r include/asm-$(ARCH)/Kbuild ]; then \
+	@if [ ! -r $(srctree)/include/asm-$(ARCH)/Kbuild ]; then \
 	  echo '*** Error: Headers not exportable for this architecture ($(ARCH))'; \
 	  exit 1 ; fi
 	$(Q)$(MAKE) $(build)=scripts scripts/unifdef
@@ -1316,7 +1320,8 @@ define xtags
 	    $(all-sources) | xargs $1 -a \
 		-I __initdata,__exitdata,__acquires,__releases \
 		-I EXPORT_SYMBOL,EXPORT_SYMBOL_GPL \
-		--extra=+f --c-kinds=+px; \
+		--extra=+f --c-kinds=+px \
+		--regex-asm='/ENTRY\(([^)]*)\).*/\1/'; \
 	    $(all-kconfigs) | xargs $1 -a \
 		--langdef=kconfig \
 		--language-force=kconfig \

arch/alpha/kernel/alpha_ksyms.c

@@ -6,40 +6,13 @@
  */
 
 #include <linux/module.h>
-#include <linux/string.h>
-#include <linux/user.h>
-#include <linux/elfcore.h>
-#include <linux/socket.h>
-#include <linux/syscalls.h>
-#include <linux/in.h>
-#include <linux/in6.h>
-#include <linux/pci.h>
-#include <linux/screen_info.h>
-#include <linux/tty.h>
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/io.h>
 #include <asm/console.h>
-#include <asm/hwrpb.h>
 #include <asm/uaccess.h>
-#include <asm/processor.h>
 #include <asm/checksum.h>
-#include <linux/interrupt.h>
 #include <asm/fpu.h>
-#include <asm/irq.h>
 #include <asm/machvec.h>
-#include <asm/pgalloc.h>
-#include <asm/semaphore.h>
-#include <asm/tlbflush.h>
-#include <asm/cacheflush.h>
-#include <asm/vga.h>
 
-#include <asm/unistd.h>
-
-extern struct hwrpb_struct *hwrpb;
-extern spinlock_t rtc_lock;
+#include <linux/syscalls.h>
 
 /* these are C runtime functions with special calling conventions: */
 extern void __divl (void);
@@ -52,14 +25,9 @@ extern void __divqu (void);
 extern void __remqu (void);
 
 EXPORT_SYMBOL(alpha_mv);
-EXPORT_SYMBOL(screen_info);
-EXPORT_SYMBOL(perf_irq);
 EXPORT_SYMBOL(callback_getenv);
 EXPORT_SYMBOL(callback_setenv);
 EXPORT_SYMBOL(callback_save_env);
-#ifdef CONFIG_ALPHA_GENERIC
-EXPORT_SYMBOL(alpha_using_srm);
-#endif /* CONFIG_ALPHA_GENERIC */
 
 /* platform dependent support */
 EXPORT_SYMBOL(strcat);
@@ -77,47 +45,14 @@ EXPORT_SYMBOL(__constant_c_memset);
 EXPORT_SYMBOL(copy_page);
 EXPORT_SYMBOL(clear_page);
 
-EXPORT_SYMBOL(__direct_map_base);
-EXPORT_SYMBOL(__direct_map_size);
-
-#ifdef CONFIG_PCI
-EXPORT_SYMBOL(pci_alloc_consistent);
-EXPORT_SYMBOL(pci_free_consistent);
-EXPORT_SYMBOL(pci_map_single);
-EXPORT_SYMBOL(pci_map_page);
-EXPORT_SYMBOL(pci_unmap_single);
-EXPORT_SYMBOL(pci_unmap_page);
-EXPORT_SYMBOL(pci_map_sg);
-EXPORT_SYMBOL(pci_unmap_sg);
-EXPORT_SYMBOL(pci_dma_supported);
-EXPORT_SYMBOL(pci_dac_dma_supported);
-EXPORT_SYMBOL(pci_dac_page_to_dma);
-EXPORT_SYMBOL(pci_dac_dma_to_page);
-EXPORT_SYMBOL(pci_dac_dma_to_offset);
-EXPORT_SYMBOL(alpha_gendev_to_pci);
-#endif
-EXPORT_SYMBOL(dma_set_mask);
-
-EXPORT_SYMBOL(dump_thread);
-EXPORT_SYMBOL(dump_elf_thread);
-EXPORT_SYMBOL(dump_elf_task);
-EXPORT_SYMBOL(dump_elf_task_fp);
-EXPORT_SYMBOL(hwrpb);
-EXPORT_SYMBOL(start_thread);
 EXPORT_SYMBOL(alpha_read_fp_reg);
 EXPORT_SYMBOL(alpha_read_fp_reg_s);
 EXPORT_SYMBOL(alpha_write_fp_reg);
 EXPORT_SYMBOL(alpha_write_fp_reg_s);
 
-/* In-kernel system calls.  */
+/* entry.S */
 EXPORT_SYMBOL(kernel_thread);
-EXPORT_SYMBOL(sys_dup);
-EXPORT_SYMBOL(sys_exit);
-EXPORT_SYMBOL(sys_write);
-EXPORT_SYMBOL(sys_lseek);
 EXPORT_SYMBOL(kernel_execve);
-EXPORT_SYMBOL(sys_setsid);
-EXPORT_SYMBOL(sys_wait4);
 
 /* Networking helper routines. */
 EXPORT_SYMBOL(csum_tcpudp_magic);
@@ -134,10 +69,6 @@ EXPORT_SYMBOL(alpha_fp_emul_imprecise);
 EXPORT_SYMBOL(alpha_fp_emul);
 #endif
 
-#ifdef CONFIG_ALPHA_BROKEN_IRQ_MASK
-EXPORT_SYMBOL(__min_ipl);
-#endif
-
 /*
  * The following are specially called from the uaccess assembly stubs.
  */
@@ -160,26 +91,9 @@ EXPORT_SYMBOL(up);
  */
 
 #ifdef CONFIG_SMP
-EXPORT_SYMBOL(flush_tlb_mm);
-EXPORT_SYMBOL(flush_tlb_range);
-EXPORT_SYMBOL(flush_tlb_page);
-EXPORT_SYMBOL(smp_imb);
-EXPORT_SYMBOL(cpu_data);
-EXPORT_SYMBOL(smp_num_cpus);
-EXPORT_SYMBOL(smp_call_function);
-EXPORT_SYMBOL(smp_call_function_on_cpu);
 EXPORT_SYMBOL(_atomic_dec_and_lock);
 #endif /* CONFIG_SMP */
 
-/*
- * NUMA specific symbols
- */
-#ifdef CONFIG_DISCONTIGMEM
-EXPORT_SYMBOL(node_data);
-#endif /* CONFIG_DISCONTIGMEM */
-
-EXPORT_SYMBOL(rtc_lock);
-
 /*
  * The following are special because they're not called
  * explicitly (the C compiler or assembler generates them in
@@ -200,8 +114,3 @@ EXPORT_SYMBOL(__remqu);
 EXPORT_SYMBOL(memcpy);
 EXPORT_SYMBOL(memset);
 EXPORT_SYMBOL(memchr);
-
-#ifdef CONFIG_ALPHA_IRONGATE
-EXPORT_SYMBOL(irongate_ioremap);
-EXPORT_SYMBOL(irongate_iounmap);
-#endif

arch/alpha/kernel/core_irongate.c

@@ -404,6 +404,7 @@ irongate_ioremap(unsigned long addr, unsigned long size)
 #endif
 	return (void __iomem *)vaddr;
 }
+EXPORT_SYMBOL(irongate_ioremap);
 
 void
 irongate_iounmap(volatile void __iomem *xaddr)
@@ -414,3 +415,4 @@ irongate_iounmap(volatile void __iomem *xaddr)
 	if (addr)
 		return vfree((void *)(PAGE_MASK & addr)); 
 }
+EXPORT_SYMBOL(irongate_iounmap);

arch/alpha/kernel/irq_alpha.c

@@ -6,6 +6,7 @@
 #include <linux/sched.h>
 #include <linux/irq.h>
 #include <linux/kernel_stat.h>
+#include <linux/module.h>
 
 #include <asm/machvec.h>
 #include <asm/dma.h>
@@ -16,6 +17,7 @@
 /* Hack minimum IPL during interrupt processing for broken hardware.  */
 #ifdef CONFIG_ALPHA_BROKEN_IRQ_MASK
 int __min_ipl;
+EXPORT_SYMBOL(__min_ipl);
 #endif
 
 /*
@@ -30,6 +32,7 @@ dummy_perf(unsigned long vector, struct pt_regs *regs)
 }
 
 void (*perf_irq)(unsigned long, struct pt_regs *) = dummy_perf;
+EXPORT_SYMBOL(perf_irq);
 
 /*
  * The main interrupt entry point.

arch/alpha/kernel/pci-noop.c

@@ -201,6 +201,7 @@ dma_set_mask(struct device *dev, u64 mask)
 
 	return 0;
 }
+EXPORT_SYMBOL(dma_set_mask);
 
 void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen)
 {

arch/alpha/kernel/pci_iommu.c

@@ -300,6 +300,7 @@ pci_map_single(struct pci_dev *pdev, void *cpu_addr, size_t size, int dir)
 	dac_allowed = pdev ? pci_dac_dma_supported(pdev, pdev->dma_mask) : 0; 
 	return pci_map_single_1(pdev, cpu_addr, size, dac_allowed);
 }
+EXPORT_SYMBOL(pci_map_single);
 
 dma_addr_t
 pci_map_page(struct pci_dev *pdev, struct page *page, unsigned long offset,
@@ -314,6 +315,7 @@ pci_map_page(struct pci_dev *pdev, struct page *page, unsigned long offset,
 	return pci_map_single_1(pdev, (char *)page_address(page) + offset, 
 				size, dac_allowed);
 }
+EXPORT_SYMBOL(pci_map_page);
 
 /* Unmap a single streaming mode DMA translation.  The DMA_ADDR and
    SIZE must match what was provided for in a previous pci_map_single
@@ -379,6 +381,7 @@ pci_unmap_single(struct pci_dev *pdev, dma_addr_t dma_addr, size_t size,
 	DBGA2("pci_unmap_single: sg [%lx,%lx] np %ld from %p\n",
 	      dma_addr, size, npages, __builtin_return_address(0));
 }
+EXPORT_SYMBOL(pci_unmap_single);
 
 void
 pci_unmap_page(struct pci_dev *pdev, dma_addr_t dma_addr,
@@ -386,6 +389,7 @@ pci_unmap_page(struct pci_dev *pdev, dma_addr_t dma_addr,
 {
 	pci_unmap_single(pdev, dma_addr, size, direction);
 }
+EXPORT_SYMBOL(pci_unmap_page);
 
 /* Allocate and map kernel buffer using consistent mode DMA for PCI
    device.  Returns non-NULL cpu-view pointer to the buffer if
@@ -427,6 +431,7 @@ try_again:
 
 	return cpu_addr;
 }
+EXPORT_SYMBOL(pci_alloc_consistent);
 
 /* Free and unmap a consistent DMA buffer.  CPU_ADDR and DMA_ADDR must
    be values that were returned from pci_alloc_consistent.  SIZE must
@@ -444,7 +449,7 @@ pci_free_consistent(struct pci_dev *pdev, size_t size, void *cpu_addr,
 	DBGA2("pci_free_consistent: [%x,%lx] from %p\n",
 	      dma_addr, size, __builtin_return_address(0));
 }
-
+EXPORT_SYMBOL(pci_free_consistent);
 
 /* Classify the elements of the scatterlist.  Write dma_address
    of each element with:
@@ -672,6 +677,7 @@ pci_map_sg(struct pci_dev *pdev, struct scatterlist *sg, int nents,
 		pci_unmap_sg(pdev, start, out - start, direction);
 	return 0;
 }
+EXPORT_SYMBOL(pci_map_sg);
 
 /* Unmap a set of streaming mode DMA translations.  Again, cpu read
    rules concerning calls here are the same as for pci_unmap_single()
@@ -752,6 +758,7 @@ pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sg, int nents,
 
 	DBGA("pci_unmap_sg: %ld entries\n", nents - (end - sg));
 }
+EXPORT_SYMBOL(pci_unmap_sg);
 
 
 /* Return whether the given PCI device DMA address mask can be
@@ -786,6 +793,7 @@ pci_dma_supported(struct pci_dev *pdev, u64 mask)
 
 	return 0;
 }
+EXPORT_SYMBOL(pci_dma_supported);
 
 
 /*
@@ -908,6 +916,7 @@ pci_dac_dma_supported(struct pci_dev *dev, u64 mask)
 
 	return ok;
 }
+EXPORT_SYMBOL(pci_dac_dma_supported);
 
 dma64_addr_t
 pci_dac_page_to_dma(struct pci_dev *pdev, struct page *page,
@@ -917,6 +926,7 @@ pci_dac_page_to_dma(struct pci_dev *pdev, struct page *page,
 		+ __pa(page_address(page)) 
 		+ (dma64_addr_t) offset);
 }
+EXPORT_SYMBOL(pci_dac_page_to_dma);
 
 struct page *
 pci_dac_dma_to_page(struct pci_dev *pdev, dma64_addr_t dma_addr)
@@ -924,13 +934,14 @@ pci_dac_dma_to_page(struct pci_dev *pdev, dma64_addr_t dma_addr)
 	unsigned long paddr = (dma_addr & PAGE_MASK) - alpha_mv.pci_dac_offset;
 	return virt_to_page(__va(paddr));
 }
+EXPORT_SYMBOL(pci_dac_dma_to_page);
 
 unsigned long
 pci_dac_dma_to_offset(struct pci_dev *pdev, dma64_addr_t dma_addr)
 {
 	return (dma_addr & ~PAGE_MASK);
 }
-
+EXPORT_SYMBOL(pci_dac_dma_to_offset);
 
 /* Helper for generic DMA-mapping functions. */
 
@@ -957,6 +968,7 @@ alpha_gendev_to_pci(struct device *dev)
 	/* This assumes ISA bus master with dma_mask 0xffffff. */
 	return NULL;
 }
+EXPORT_SYMBOL(alpha_gendev_to_pci);
 
 int
 dma_set_mask(struct device *dev, u64 mask)
@@ -969,3 +981,4 @@ dma_set_mask(struct device *dev, u64 mask)
 
 	return 0;
 }
+EXPORT_SYMBOL(dma_set_mask);

arch/alpha/kernel/process.c

@@ -205,6 +205,7 @@ start_thread(struct pt_regs * regs, unsigned long pc, unsigned long sp)
 	regs->ps = 8;
 	wrusp(sp);
 }
+EXPORT_SYMBOL(start_thread);
 
 /*
  * Free current thread data structures etc..
@@ -376,6 +377,7 @@ dump_thread(struct pt_regs * pt, struct user * dump)
 	dump->regs[EF_A2]  = pt->r18;
 	memcpy((char *)dump->regs + EF_SIZE, sw->fp, 32 * 8);
 }
+EXPORT_SYMBOL(dump_thread);
 
 /*
  * Fill in the user structure for a ELF core dump.
@@ -424,6 +426,7 @@ dump_elf_thread(elf_greg_t *dest, struct pt_regs *pt, struct thread_info *ti)
 	   useful value of the thread's UNIQUE field.  */
 	dest[32] = ti->pcb.unique;
 }
+EXPORT_SYMBOL(dump_elf_thread);
 
 int
 dump_elf_task(elf_greg_t *dest, struct task_struct *task)
@@ -431,6 +434,7 @@ dump_elf_task(elf_greg_t *dest, struct task_struct *task)
 	dump_elf_thread(dest, task_pt_regs(task), task_thread_info(task));
 	return 1;
 }
+EXPORT_SYMBOL(dump_elf_task);
 
 int
 dump_elf_task_fp(elf_fpreg_t *dest, struct task_struct *task)
@@ -439,6 +443,7 @@ dump_elf_task_fp(elf_fpreg_t *dest, struct task_struct *task)
 	memcpy(dest, sw->fp, 32 * 8);
 	return 1;
 }
+EXPORT_SYMBOL(dump_elf_task_fp);
 
 /*
  * sys_execve() executes a new program.

arch/alpha/kernel/setup.c

@@ -66,6 +66,7 @@ static struct notifier_block alpha_panic_block = {
 
 
 struct hwrpb_struct *hwrpb;
+EXPORT_SYMBOL(hwrpb);
 unsigned long srm_hae;
 
 int alpha_l1i_cacheshape;
@@ -111,6 +112,7 @@ unsigned long alpha_agpgart_size = DEFAULT_AGP_APER_SIZE;
 #ifdef CONFIG_ALPHA_GENERIC
 struct alpha_machine_vector alpha_mv;
 int alpha_using_srm;
+EXPORT_SYMBOL(alpha_using_srm);
 #endif
 
 static struct alpha_machine_vector *get_sysvec(unsigned long, unsigned long,
@@ -137,6 +139,8 @@ struct screen_info screen_info = {
 	.orig_video_points = 16
 };
 
+EXPORT_SYMBOL(screen_info);
+
 /*
  * The direct map I/O window, if any.  This should be the same
  * for all busses, since it's used by virt_to_bus.
@@ -144,6 +148,8 @@ struct screen_info screen_info = {
 
 unsigned long __direct_map_base;
 unsigned long __direct_map_size;
+EXPORT_SYMBOL(__direct_map_base);
+EXPORT_SYMBOL(__direct_map_size);
 
 /*
  * Declare all of the machine vectors.

arch/alpha/kernel/smp.c

@@ -52,6 +52,7 @@
 
 /* A collection of per-processor data.  */
 struct cpuinfo_alpha cpu_data[NR_CPUS];
+EXPORT_SYMBOL(cpu_data);
 
 /* A collection of single bit ipi messages.  */
 static struct {
@@ -74,6 +75,7 @@ EXPORT_SYMBOL(cpu_online_map);
 
 int smp_num_probed;		/* Internal processor count */
 int smp_num_cpus = 1;		/* Number that came online.  */
+EXPORT_SYMBOL(smp_num_cpus);
 
 extern void calibrate_delay(void);
 
@@ -790,6 +792,7 @@ smp_call_function_on_cpu (void (*func) (void *info), void *info, int retry,
 
 	return 0;
 }
+EXPORT_SYMBOL(smp_call_function_on_cpu);
 
 int
 smp_call_function (void (*func) (void *info), void *info, int retry, int wait)
@@ -797,6 +800,7 @@ smp_call_function (void (*func) (void *info), void *info, int retry, int wait)
 	return smp_call_function_on_cpu (func, info, retry, wait,
 					 cpu_online_map);
 }
+EXPORT_SYMBOL(smp_call_function);
 
 static void
 ipi_imb(void *ignored)
@@ -811,6 +815,7 @@ smp_imb(void)
 	if (on_each_cpu(ipi_imb, NULL, 1, 1))
 		printk(KERN_CRIT "smp_imb: timed out\n");
 }
+EXPORT_SYMBOL(smp_imb);
 
 static void
 ipi_flush_tlb_all(void *ignored)
@@ -866,6 +871,7 @@ flush_tlb_mm(struct mm_struct *mm)
 
 	preempt_enable();
 }
+EXPORT_SYMBOL(flush_tlb_mm);
 
 struct flush_tlb_page_struct {
 	struct vm_area_struct *vma;
@@ -918,6 +924,7 @@ flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
 
 	preempt_enable();
 }
+EXPORT_SYMBOL(flush_tlb_page);
 
 void
 flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
@@ -925,6 +932,7 @@ flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long e
 	/* On the Alpha we always flush the whole user tlb.  */
 	flush_tlb_mm(vma->vm_mm);
 }
+EXPORT_SYMBOL(flush_tlb_range);
 
 static void
 ipi_flush_icache_page(void *x)

arch/alpha/kernel/srm_env.c

@@ -2,7 +2,7 @@
  * srm_env.c - Access to SRM environment
  *             variables through linux' procfs
  *
- * Copyright (C) 2001-2002 Jan-Benedict Glaw <jbglaw@lug-owl.de>
+ * (C) 2001,2002,2006 by Jan-Benedict Glaw <jbglaw@lug-owl.de>
  *
  * This driver is at all a modified version of Erik Mouw's
  * Documentation/DocBook/procfs_example.c, so: thank
@@ -21,7 +21,7 @@
  * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
  * PURPOSE.  See the GNU General Public License for more
  * details.
- * 
+ *
  * You should have received a copy of the GNU General Public
  * License along with this program; if not, write to the
  * Free Software Foundation, Inc., 59 Temple Place,
@@ -29,33 +29,6 @@
  *
  */
 
-/*
- * Changelog
- * ~~~~~~~~~
- *
- * Thu, 22 Aug 2002 15:10:43 +0200
- * 	- Update Config.help entry. I got a number of emails asking
- * 	  me to tell their senders if they could make use of this
- * 	  piece of code... So: "SRM is something like BIOS for your
- * 	  Alpha"
- * 	- Update code formatting a bit to better conform CodingStyle
- * 	  rules.
- * 	- So this is v0.0.5, with no changes (except formatting)
- * 	
- * Wed, 22 May 2002 00:11:21 +0200
- * 	- Fix typo on comment (SRC -> SRM)
- * 	- Call this "Version 0.0.4"
- *
- * Tue,  9 Apr 2002 18:44:40 +0200
- * 	- Implement access by variable name and additionally
- * 	  by number. This is done by creating two subdirectories
- * 	  where one holds all names (like the old directory
- * 	  did) and the other holding 256 files named like "0",
- * 	  "1" and so on.
- * 	- Call this "Version 0.0.3"
- *
- */
-
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -67,7 +40,7 @@
 #define BASE_DIR	"srm_environment"	/* Subdir in /proc/		*/
 #define NAMED_DIR	"named_variables"	/* Subdir for known variables	*/
 #define NUMBERED_DIR	"numbered_variables"	/* Subdir for all variables	*/
-#define VERSION		"0.0.5"			/* Module version		*/
+#define VERSION		"0.0.6"			/* Module version		*/
 #define NAME		"srm_env"		/* Module name			*/
 
 MODULE_AUTHOR("Jan-Benedict Glaw <jbglaw@lug-owl.de>");
@@ -106,7 +79,6 @@ static srm_env_t	srm_named_entries[] = {
 static srm_env_t	srm_numbered_entries[256];
 
 
-
 static int
 srm_env_read(char *page, char **start, off_t off, int count, int *eof,
 		void *data)
@@ -115,21 +87,23 @@ srm_env_read(char *page, char **start, off_t off, int count, int *eof,
 	unsigned long	ret;
 	srm_env_t	*entry;
 
-	if(off != 0)
-		return -EFAULT;
+	if (off != 0) {
+		*eof = 1;
+		return 0;
+	}
 
 	entry	= (srm_env_t *) data;
 	ret	= callback_getenv(entry->id, page, count);
 
-	if((ret >> 61) == 0)
+	if ((ret >> 61) == 0) {
 		nbytes = (int) ret;
-	else
+		*eof = 1;
+	} else
 		nbytes = -EFAULT;
 
 	return nbytes;
 }
 
-
 static int
 srm_env_write(struct file *file, const char __user *buffer, unsigned long count,
 		void *data)
@@ -155,7 +129,7 @@ srm_env_write(struct file *file, const char __user *buffer, unsigned long count,
 
 	ret1 = callback_setenv(entry->id, buf, count);
 	if ((ret1 >> 61) == 0) {
-		do 
+		do
 			ret2 = callback_save_env();
 		while((ret2 >> 61) == 1);
 		res = (int) ret1;
@@ -172,14 +146,14 @@ srm_env_cleanup(void)
 	srm_env_t	*entry;
 	unsigned long	var_num;
 
-	if(base_dir) {
+	if (base_dir) {
 		/*
 		 * Remove named entries
 		 */
-		if(named_dir) {
+		if (named_dir) {
 			entry = srm_named_entries;
-			while(entry->name != NULL && entry->id != 0) {
-				if(entry->proc_entry) {
+			while (entry->name != NULL && entry->id != 0) {
+				if (entry->proc_entry) {
 					remove_proc_entry(entry->name,
 							named_dir);
 					entry->proc_entry = NULL;
@@ -192,11 +166,11 @@ srm_env_cleanup(void)
 		/*
 		 * Remove numbered entries
 		 */
-		if(numbered_dir) {
-			for(var_num = 0; var_num <= 255; var_num++) {
+		if (numbered_dir) {
+			for (var_num = 0; var_num <= 255; var_num++) {
 				entry =	&srm_numbered_entries[var_num];
 
-				if(entry->proc_entry) {
+				if (entry->proc_entry) {
 					remove_proc_entry(entry->name,
 							numbered_dir);
 					entry->proc_entry	= NULL;
@@ -212,7 +186,6 @@ srm_env_cleanup(void)
 	return;
 }
 
-
 static int __init
 srm_env_init(void)
 {
@@ -222,7 +195,7 @@ srm_env_init(void)
 	/*
 	 * Check system
 	 */
-	if(!alpha_using_srm) {
+	if (!alpha_using_srm) {
 		printk(KERN_INFO "%s: This Alpha system doesn't "
 				"know about SRM (or you've booted "
 				"SRM->MILO->Linux, which gets "
@@ -233,14 +206,14 @@ srm_env_init(void)
 	/*
 	 * Init numbers
 	 */
-	for(var_num = 0; var_num <= 255; var_num++)
+	for (var_num = 0; var_num <= 255; var_num++)
 		sprintf(number[var_num], "%ld", var_num);
 
 	/*
 	 * Create base directory
 	 */
 	base_dir = proc_mkdir(BASE_DIR, NULL);
-	if(base_dir == NULL) {
+	if (!base_dir) {
 		printk(KERN_ERR "Couldn't create base dir /proc/%s\n",
 				BASE_DIR);
 		goto cleanup;
@@ -251,7 +224,7 @@ srm_env_init(void)
 	 * Create per-name subdirectory
 	 */
 	named_dir = proc_mkdir(NAMED_DIR, base_dir);
-	if(named_dir == NULL) {
+	if (!named_dir) {
 		printk(KERN_ERR "Couldn't create dir /proc/%s/%s\n",
 				BASE_DIR, NAMED_DIR);
 		goto cleanup;
@@ -262,7 +235,7 @@ srm_env_init(void)
 	 * Create per-number subdirectory
 	 */
 	numbered_dir = proc_mkdir(NUMBERED_DIR, base_dir);
-	if(numbered_dir == NULL) {
+	if (!numbered_dir) {
 		printk(KERN_ERR "Couldn't create dir /proc/%s/%s\n",
 				BASE_DIR, NUMBERED_DIR);
 		goto cleanup;
@@ -274,10 +247,10 @@ srm_env_init(void)
 	 * Create all named nodes
 	 */
 	entry = srm_named_entries;
-	while(entry->name != NULL && entry->id != 0) {
+	while (entry->name && entry->id) {
 		entry->proc_entry = create_proc_entry(entry->name,
 				0644, named_dir);
-		if(entry->proc_entry == NULL)
+		if (!entry->proc_entry)
 			goto cleanup;
 
 		entry->proc_entry->data		= (void *) entry;
@@ -291,13 +264,13 @@ srm_env_init(void)
 	/*
 	 * Create all numbered nodes
 	 */
-	for(var_num = 0; var_num <= 255; var_num++) {
+	for (var_num = 0; var_num <= 255; var_num++) {
 		entry = &srm_numbered_entries[var_num];
 		entry->name = number[var_num];
 
 		entry->proc_entry = create_proc_entry(entry->name,
 				0644, numbered_dir);
-		if(entry->proc_entry == NULL)
+		if (!entry->proc_entry)
 			goto cleanup;
 
 		entry->id			= var_num;
@@ -318,7 +291,6 @@ cleanup:
 	return -ENOMEM;
 }
 
-
 static void __exit
 srm_env_exit(void)
 {
@@ -328,7 +300,5 @@ srm_env_exit(void)
 	return;
 }
 
-
 module_init(srm_env_init);
 module_exit(srm_env_exit);
-

arch/alpha/kernel/time.c

@@ -57,6 +57,7 @@
 static int set_rtc_mmss(unsigned long);
 
 DEFINE_SPINLOCK(rtc_lock);
+EXPORT_SYMBOL(rtc_lock);
 
 #define TICK_SIZE (tick_nsec / 1000)
 

arch/alpha/kernel/vmlinux.lds.S

@@ -48,13 +48,7 @@ SECTIONS
   . = ALIGN(8);
   __initcall_start = .;
   .initcall.init : {
-	*(.initcall1.init) 
-	*(.initcall2.init) 
-	*(.initcall3.init) 
-	*(.initcall4.init) 
-	*(.initcall5.init) 
-	*(.initcall6.init) 
-	*(.initcall7.init)
+	INITCALLS
   }
   __initcall_end = .;
 

arch/alpha/mm/numa.c

@@ -13,12 +13,14 @@
 #include <linux/swap.h>
 #include <linux/initrd.h>
 #include <linux/pfn.h>
+#include <linux/module.h>
 
 #include <asm/hwrpb.h>
 #include <asm/pgalloc.h>
 
 pg_data_t node_data[MAX_NUMNODES];
 bootmem_data_t node_bdata[MAX_NUMNODES];
+EXPORT_SYMBOL(node_data);
 
 #undef DEBUG_DISCONTIG
 #ifdef DEBUG_DISCONTIG

arch/arm/Makefile

@@ -174,11 +174,13 @@ libs-y				:= arch/arm/lib/ $(libs-y)
 
 # Default target when executing plain make
 ifeq ($(CONFIG_XIP_KERNEL),y)
-all: xipImage
+KBUILD_IMAGE := xipImage
 else
-all: zImage
+KBUILD_IMAGE := zImage
 endif
 
+all:	$(KBUILD_IMAGE)
+
 boot := arch/arm/boot
 
 #	Update machine arch and proc symlinks if something which affects

arch/arm/common/dmabounce.c

@@ -662,7 +662,8 @@ EXPORT_SYMBOL(dma_map_single);
 EXPORT_SYMBOL(dma_unmap_single);
 EXPORT_SYMBOL(dma_map_sg);
 EXPORT_SYMBOL(dma_unmap_sg);
-EXPORT_SYMBOL(dma_sync_single);
+EXPORT_SYMBOL(dma_sync_single_for_cpu);
+EXPORT_SYMBOL(dma_sync_single_for_device);
 EXPORT_SYMBOL(dma_sync_sg);
 EXPORT_SYMBOL(dmabounce_register_dev);
 EXPORT_SYMBOL(dmabounce_unregister_dev);

arch/arm/configs/at91rm9200dk_defconfig

@@ -577,7 +577,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91_WATCHDOG=y
+CONFIG_AT91RM9200_WATCHDOG=y
 
 #
 # USB-based Watchdog Cards

arch/arm/configs/at91rm9200ek_defconfig

@@ -558,7 +558,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91_WATCHDOG=y
+CONFIG_AT91RM9200_WATCHDOG=y
 
 #
 # USB-based Watchdog Cards

arch/arm/configs/ateb9200_defconfig

@@ -217,7 +217,7 @@ CONFIG_BINFMT_ELF=y
 # Power management options
 #
 CONFIG_PM=y
-CONFIG_PM_LEGACY=y
+# CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 # CONFIG_APM is not set
 

arch/arm/configs/collie_defconfig

@@ -219,7 +219,7 @@ CONFIG_BINFMT_ELF=y
 # Power management options
 #
 CONFIG_PM=y
-CONFIG_PM_LEGACY=y
+# CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 CONFIG_APM=y
 

arch/arm/configs/csb337_defconfig

@@ -615,7 +615,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91_WATCHDOG=y
+CONFIG_AT91RM9200_WATCHDOG=y
 
 #
 # USB-based Watchdog Cards

arch/arm/configs/csb637_defconfig

@@ -615,7 +615,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91_WATCHDOG=y
+CONFIG_AT91RM9200_WATCHDOG=y
 
 #
 # USB-based Watchdog Cards

arch/arm/configs/ixp4xx_defconfig

@@ -206,10 +206,8 @@ CONFIG_BINFMT_ELF=y
 #
 # Power management options
 #
-CONFIG_PM=y
-CONFIG_PM_LEGACY=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_APM=y
+# CONFIG_PM is not set
+# CONFIG_APM is not set
 
 #
 # Networking

arch/arm/configs/kafa_defconfig

@@ -560,7 +560,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91_WATCHDOG=y
+CONFIG_AT91RM9200_WATCHDOG=y
 # CONFIG_NVRAM is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set

arch/arm/configs/omap_h2_1610_defconfig

@@ -257,7 +257,7 @@ CONFIG_BINFMT_AOUT=y
 # Power management options
 #
 CONFIG_PM=y
-CONFIG_PM_LEGACY=y
+# CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 # CONFIG_APM is not set
 

arch/arm/configs/onearm_defconfig

@@ -607,7 +607,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91_WATCHDOG=y
+CONFIG_AT91RM9200_WATCHDOG=y
 
 #
 # USB-based Watchdog Cards

arch/arm/configs/bast_defconfig → arch/arm/configs/realview-smp_defconfig

@@ -1,136 +1,168 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 02:24:16 2005
+# Linux kernel version: 2.6.19-rc3
+# Wed Oct 25 14:12:00 2006
 #
 CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
 CONFIG_MMU=y
-CONFIG_UID16=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+# CONFIG_CPUSETS is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
 #
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
+# CONFIG_KMOD is not set
+CONFIG_STOP_MACHINE=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
 
 #
 # System Type
 #
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+CONFIG_ARCH_REALVIEW=y
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
-CONFIG_ARCH_S3C2410=y
+# CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# S3C24XX Implementations
-#
-CONFIG_ARCH_BAST=y
-# CONFIG_ARCH_H1940 is not set
-# CONFIG_MACH_N30 is not set
-# CONFIG_ARCH_SMDK2410 is not set
-# CONFIG_ARCH_S3C2440 is not set
-CONFIG_MACH_VR1000=y
-# CONFIG_MACH_RX3715 is not set
-# CONFIG_MACH_OTOM is not set
-# CONFIG_MACH_NEXCODER_2440 is not set
-CONFIG_CPU_S3C2410=y
-
-#
-# S3C2410 Boot
-#
-# CONFIG_S3C2410_BOOT_WATCHDOG is not set
 
 #
-# S3C2410 Setup
+# RealView platform type
 #
-CONFIG_S3C2410_DMA=y
-# CONFIG_S3C2410_DMA_DEBUG is not set
-# CONFIG_S3C2410_PM_DEBUG is not set
-# CONFIG_S3C2410_PM_CHECK is not set
-CONFIG_S3C2410_LOWLEVEL_UART_PORT=0
+CONFIG_MACH_REALVIEW_EB=y
+CONFIG_REALVIEW_MPCORE=y
 
 #
 # Processor Type
 #
 CONFIG_CPU_32=y
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
+# CONFIG_CPU_ARM926T is not set
+CONFIG_CPU_V6=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
 
 #
 # Processor Features
 #
-# CONFIG_ARM_THUMB is not set
+CONFIG_ARM_THUMB=y
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_GIC=y
+CONFIG_ICST307=y
 
 #
 # Bus support
 #
+CONFIG_ARM_AMBA=y
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -140,7 +172,24 @@ CONFIG_CPU_TLB_V4WBI=y
 #
 # Kernel Features
 #
+CONFIG_SMP=y
+CONFIG_NR_CPUS=4
+CONFIG_HOTPLUG_CPU=y
+CONFIG_LOCAL_TIMERS=y
 # CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -148,7 +197,7 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0"
+CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=ttyAMA0 mem=128M"
 # CONFIG_XIP_KERNEL is not set
 
 #
@@ -161,20 +210,105 @@ CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0"
 CONFIG_FPE_NWFPE=y
 # CONFIG_FPE_NWFPE_XP is not set
 # CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
 
 #
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_ARTHUR is not set
 
 #
 # Power management options
 #
-CONFIG_PM=y
-CONFIG_APM=y
+# CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
 
 #
 # Device Drivers
@@ -187,6 +321,12 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
 
 #
 # Memory Technology Devices (MTD)
@@ -195,10 +335,7 @@ CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
 
@@ -210,44 +347,42 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
 
 #
 # RAM/ROM/Flash chip drivers
 #
 CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
+# CONFIG_MTD_JEDECPROBE is not set
 CONFIG_MTD_GEN_PROBE=y
 # CONFIG_MTD_CFI_ADV_OPTIONS is not set
 CONFIG_MTD_MAP_BANK_WIDTH_1=y
 CONFIG_MTD_MAP_BANK_WIDTH_2=y
 CONFIG_MTD_MAP_BANK_WIDTH_4=y
 # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_16=y
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
 # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
 CONFIG_MTD_CFI_I1=y
 CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
+CONFIG_MTD_CFI_AMDSTD=y
 # CONFIG_MTD_CFI_STAA is not set
 CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
 # CONFIG_MTD_OBSOLETE_CHIPS is not set
-# CONFIG_MTD_XIP is not set
 
 #
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 # CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-# CONFIG_MTD_IMPA7 is not set
-CONFIG_MTD_BAST=y
-CONFIG_MTD_BAST_MAXSIZE=4
+CONFIG_MTD_ARM_INTEGRATOR=y
+# CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
@@ -255,7 +390,6 @@ CONFIG_MTD_BAST_MAXSIZE=4
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
 # CONFIG_MTD_BLOCK2MTD is not set
 
 #
@@ -268,23 +402,17 @@ CONFIG_MTD_BAST_MAXSIZE=4
 #
 # NAND Flash Device Drivers
 #
-CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-CONFIG_MTD_NAND_IDS=y
-CONFIG_MTD_NAND_S3C2410=y
-# CONFIG_MTD_NAND_S3C2410_DEBUG is not set
-# CONFIG_MTD_NAND_S3C2410_HWECC is not set
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
 
 #
 # Parallel port support
 #
-CONFIG_PARPORT=y
-# CONFIG_PARPORT_PC is not set
-# CONFIG_PARPORT_ARC is not set
-# CONFIG_PARPORT_GSC is not set
-CONFIG_PARPORT_1284=y
+# CONFIG_PARPORT is not set
 
 #
 # Plug and Play support
@@ -293,59 +421,20 @@ CONFIG_PARPORT_1284=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_PARIDE is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDETAPE=m
-CONFIG_BLK_DEV_IDEFLOPPY=m
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDE_BAST=y
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -355,6 +444,7 @@ CONFIG_BLK_DEV_IDE_BAST=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -365,81 +455,26 @@ CONFIG_BLK_DEV_IDE_BAST=y
 #
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
+# Network device support
 #
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
 #
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_SMC91X is not set
+CONFIG_MII=y
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -462,11 +497,12 @@ CONFIG_NET_ETHERNET=y
 # Wan interfaces
 #
 # CONFIG_WAN is not set
-# CONFIG_PLIP is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -477,6 +513,7 @@ CONFIG_NET_ETHERNET=y
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -499,6 +536,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 # CONFIG_MOUSE_SERIAL is not set
@@ -511,12 +549,11 @@ CONFIG_MOUSE_PS2=y
 # Hardware I/O ports
 #
 CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PARKBD is not set
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_AMBAKMI=y
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 
 #
 # Character devices
@@ -524,49 +561,25 @@ CONFIG_SOUND_GAMEPORT=y
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
-CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINKMP is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
 
 #
 # Serial drivers
 #
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=8
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
-# CONFIG_SERIAL_8250_RSA is not set
+# CONFIG_SERIAL_8250 is not set
 
 #
 # Non-8250 serial port support
 #
-CONFIG_SERIAL_S3C2410=y
-CONFIG_SERIAL_S3C2410_CONSOLE=y
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_PRINTER=y
-# CONFIG_LP_CONSOLE is not set
-CONFIG_PPDEV=y
-# CONFIG_TIPAR is not set
+CONFIG_LEGACY_PTY_COUNT=16
 
 #
 # IPMI
@@ -576,24 +589,15 @@ CONFIG_PPDEV=y
 #
 # Watchdog Cards
 #
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_S3C2410_WATCHDOG=y
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-CONFIG_S3C2410_RTC=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
@@ -604,73 +608,43 @@ CONFIG_S3C2410_RTC=y
 #
 # I2C support
 #
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=m
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ISA is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-CONFIG_I2C_S3C2410=y
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Hardware Sensors Chip support
-#
-CONFIG_I2C_SENSOR=m
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-CONFIG_SENSORS_LM75=m
-# CONFIG_SENSORS_LM77 is not set
-CONFIG_SENSORS_LM78=m
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-CONFIG_SENSORS_LM85=m
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-CONFIG_SENSORS_EEPROM=m
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
 
 #
 # Misc devices
 #
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
 
 #
 # Multimedia devices
@@ -685,13 +659,17 @@ CONFIG_SENSORS_EEPROM=m
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
-CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
+CONFIG_FB_ARMCLCD=y
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -699,26 +677,75 @@ CONFIG_FB_MODE_HELPERS=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
 
 #
 # Logo configuration
 #
-# CONFIG_LOGO is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
 #
-# CONFIG_SOUND is not set
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_BUS=m
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+CONFIG_SND_ARMAACI=m
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
 
 #
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #
@@ -727,33 +754,62 @@ CONFIG_USB_ARCH_HAS_HCD=y
 #
 # MMC/SD Card support
 #
-# CONFIG_MMC is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_ARMMMCI=y
+# CONFIG_MMC_TIFM_SD is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_PL031=y
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_INOTIFY_USER is not set
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -765,7 +821,7 @@ CONFIG_DNOTIFY=y
 # DOS/FAT/NT Filesystems
 #
 CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
+# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
 CONFIG_FAT_DEFAULT_CODEPAGE=437
 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
@@ -775,12 +831,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -792,18 +849,9 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-CONFIG_JFFS_FS=y
-CONFIG_JFFS_FS_VERBOSE=0
-# CONFIG_JFFS_PROC_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
@@ -814,12 +862,15 @@ CONFIG_JFFS2_RTIME=y
 # Network File Systems
 #
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -828,33 +879,20 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
+# CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
-# CONFIG_MINIX_SUBPARTITION is not set
-CONFIG_SOLARIS_X86_PARTITION=y
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
 
 #
 # Native Language Support
 #
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
+CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_CODEPAGE_737 is not set
 # CONFIG_NLS_CODEPAGE_775 is not set
 # CONFIG_NLS_CODEPAGE_850 is not set
@@ -878,7 +916,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
 # CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
+CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
 # CONFIG_NLS_ISO8859_4 is not set
@@ -902,25 +940,37 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=16
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_RWSEMS=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_UNWIND_INFO is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
 # CONFIG_DEBUG_WAITQ is not set
-# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
-CONFIG_DEBUG_S3C2410_PORT=y
-CONFIG_DEBUG_S3C2410_UART=0
 
 #
 # Security options
@@ -933,15 +983,12 @@ CONFIG_DEBUG_S3C2410_UART=0
 #
 # CONFIG_CRYPTO is not set
 
-#
-# Hardware crypto devices
-#
-
 #
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y

arch/arm/configs/s3c2410_defconfig

@@ -1,9 +1,10 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Wed Sep 20 20:27:31 2006
+# Linux kernel version: 2.6.19-rc4
+# Fri Nov  3 17:41:31 2006
 #
 CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -29,17 +30,20 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 # CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
-CONFIG_SYSCTL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -62,7 +66,8 @@ CONFIG_BASE_SMALL=0
 # Loadable module support
 #
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
@@ -70,6 +75,7 @@ CONFIG_KMOD=y
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 
 #
@@ -120,6 +126,7 @@ CONFIG_ARCH_S3C2410=y
 #
 # S3C24XX Implementations
 #
+# CONFIG_MACH_AML_M5900 is not set
 CONFIG_MACH_ANUBIS=y
 CONFIG_MACH_OSIRIS=y
 CONFIG_ARCH_BAST=y
@@ -178,6 +185,8 @@ CONFIG_CPU_CACHE_V4WT=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_V4WB=y
 CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
 
 #
 # Processor Features
@@ -249,8 +258,9 @@ CONFIG_BINFMT_AOUT=y
 # Power management options
 #
 CONFIG_PM=y
-CONFIG_PM_LEGACY=y
+# CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
 CONFIG_APM=y
 
 #
@@ -266,6 +276,7 @@ CONFIG_NET=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -286,10 +297,12 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
@@ -377,6 +390,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -418,6 +432,8 @@ CONFIG_MTD_BAST_MAXSIZE=4
 #
 # Self-contained MTD device drivers
 #
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -512,6 +528,7 @@ CONFIG_BLK_DEV_IDE_BAST=y
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -606,6 +623,7 @@ CONFIG_DM9000=y
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -628,6 +646,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 # CONFIG_MOUSE_SERIAL is not set
@@ -734,7 +753,6 @@ CONFIG_S3C2410_WATCHDOG=y
 # CONFIG_USBPCWATCHDOG is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
-CONFIG_S3C2410_RTC=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
@@ -747,7 +765,6 @@ CONFIG_S3C2410_RTC=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -792,12 +809,26 @@ CONFIG_SENSORS_EEPROM=m
 #
 # SPI support
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=m
+# CONFIG_SPI_BUTTERFLY is not set
+CONFIG_SPI_S3C24XX_GPIO=m
+CONFIG_SPI_S3C24XX=m
+
+#
+# SPI Protocol Masters
+#
 
 #
 # Dallas's 1-wire bus
 #
+# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -820,6 +851,7 @@ CONFIG_HWMON_VID=m
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
 CONFIG_SENSORS_LM75=m
 # CONFIG_SENSORS_LM77 is not set
 CONFIG_SENSORS_LM78=m
@@ -834,6 +866,7 @@ CONFIG_SENSORS_LM85=m
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
@@ -845,25 +878,31 @@ CONFIG_SENSORS_LM85=m
 #
 # Misc devices
 #
+# CONFIG_TIFM_CORE is not set
 
 #
 # LED devices
 #
-# CONFIG_NEW_LEDS is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
 
 #
 # LED drivers
 #
+CONFIG_LEDS_S3C24XX=m
 
 #
 # LED Triggers
 #
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -876,6 +915,7 @@ CONFIG_VIDEO_V4L2=y
 #
 CONFIG_FIRMWARE_EDID=y
 CONFIG_FB=y
+# CONFIG_FB_DDC is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -951,7 +991,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # may also be needed; see USB_STORAGE Help for more information
 #
-# CONFIG_USB_STORAGE is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -1007,6 +1046,7 @@ CONFIG_USB_MON=y
 #
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
 # CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
@@ -1014,11 +1054,12 @@ CONFIG_USB_MON=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_TEST is not set
 
 #
@@ -1039,7 +1080,37 @@ CONFIG_USB_MON=y
 # Real Time Clock
 #
 CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+CONFIG_RTC_DRV_S3C=y
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
 # File systems
@@ -1051,6 +1122,7 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
@@ -1058,6 +1130,7 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 CONFIG_ROMFS_FS=y
@@ -1089,6 +1162,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
@@ -1219,6 +1293,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
@@ -1238,9 +1313,10 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
 CONFIG_FORCED_INLINING=y
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
 # CONFIG_DEBUG_WAITQ is not set
@@ -1261,10 +1337,6 @@ CONFIG_DEBUG_S3C2410_UART=0
 #
 # CONFIG_CRYPTO is not set
 
-#
-# Hardware crypto devices
-#
-
 #
 # Library routines
 #

arch/arm/configs/smdk2410_defconfig

@@ -1,735 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 22:42:40 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-CONFIG_ARCH_S3C2410=y
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# S3C24XX Implementations
-#
-# CONFIG_ARCH_BAST is not set
-# CONFIG_ARCH_H1940 is not set
-# CONFIG_MACH_N30 is not set
-CONFIG_ARCH_SMDK2410=y
-# CONFIG_ARCH_S3C2440 is not set
-# CONFIG_MACH_VR1000 is not set
-# CONFIG_MACH_RX3715 is not set
-# CONFIG_MACH_OTOM is not set
-# CONFIG_MACH_NEXCODER_2440 is not set
-CONFIG_CPU_S3C2410=y
-
-#
-# S3C2410 Boot
-#
-
-#
-# S3C2410 Setup
-#
-# CONFIG_S3C2410_DMA is not set
-CONFIG_S3C2410_LOWLEVEL_UART_PORT=0
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=1f04 mem=32M"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_SMC91X is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_S3C2410=y
-CONFIG_SERIAL_S3C2410_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_S3C2410_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-CONFIG_FB_VIRTUAL=y
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
-# CONFIG_DEBUG_ERRORS is not set
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-CONFIG_DEBUG_S3C2410_PORT=y
-CONFIG_DEBUG_S3C2410_UART=0
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=y

arch/arm/configs/versatile_defconfig

@@ -200,7 +200,7 @@ CONFIG_BINFMT_ELF=y
 # Power management options
 #
 CONFIG_PM=y
-CONFIG_PM_LEGACY=y
+# CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 # CONFIG_APM is not set
 

arch/arm/kernel/armksyms.c

@@ -178,9 +178,3 @@ EXPORT_SYMBOL(_find_next_zero_bit_be);
 EXPORT_SYMBOL(_find_first_bit_be);
 EXPORT_SYMBOL(_find_next_bit_be);
 #endif
-
-	/* syscalls */
-EXPORT_SYMBOL(sys_write);
-EXPORT_SYMBOL(sys_lseek);
-EXPORT_SYMBOL(sys_exit);
-EXPORT_SYMBOL(sys_wait4);

arch/arm/kernel/setup.c

@@ -357,6 +357,9 @@ static void __init setup_processor(void)
 #ifndef CONFIG_VFP
 	elf_hwcap &= ~HWCAP_VFP;
 #endif
+#ifndef CONFIG_IWMMXT
+	elf_hwcap &= ~HWCAP_IWMMXT;
+#endif
 
 	cpu_proc_init();
 }
@@ -854,6 +857,7 @@ static const char *hwcap_str[] = {
 	"vfp",
 	"edsp",
 	"java",
+	"iwmmxt",
 	NULL
 };
 

arch/arm/kernel/smp.c

@@ -7,6 +7,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/spinlock.h>
@@ -19,6 +20,7 @@
 #include <linux/cpu.h>
 #include <linux/smp.h>
 #include <linux/seq_file.h>
+#include <linux/irq.h>
 
 #include <asm/atomic.h>
 #include <asm/cacheflush.h>
@@ -474,25 +476,26 @@ void show_local_irqs(struct seq_file *p)
 	seq_putc(p, '\n');
 }
 
-static void ipi_timer(struct pt_regs *regs)
+static void ipi_timer(void)
 {
-	int user = user_mode(regs);
-
 	irq_enter();
-	profile_tick(CPU_PROFILING, regs);
-	update_process_times(user);
+	profile_tick(CPU_PROFILING);
+	update_process_times(user_mode(get_irq_regs()));
 	irq_exit();
 }
 
 #ifdef CONFIG_LOCAL_TIMERS
 asmlinkage void do_local_timer(struct pt_regs *regs)
 {
+	struct pt_regs *old_regs = set_irq_regs(regs);
 	int cpu = smp_processor_id();
 
 	if (local_timer_ack()) {
 		irq_stat[cpu].local_timer_irqs++;
-		ipi_timer(regs);
+		ipi_timer();
 	}
+
+	set_irq_regs(old_regs);
 }
 #endif
 
@@ -551,6 +554,7 @@ asmlinkage void do_IPI(struct pt_regs *regs)
 {
 	unsigned int cpu = smp_processor_id();
 	struct ipi_data *ipi = &per_cpu(ipi_data, cpu);
+	struct pt_regs *old_regs = set_irq_regs(regs);
 
 	ipi->ipi_count++;
 
@@ -574,7 +578,7 @@ asmlinkage void do_IPI(struct pt_regs *regs)
 
 			switch (nextmsg) {
 			case IPI_TIMER:
-				ipi_timer(regs);
+				ipi_timer();
 				break;
 
 			case IPI_RESCHEDULE:
@@ -599,6 +603,8 @@ asmlinkage void do_IPI(struct pt_regs *regs)
 			}
 		} while (msgs);
 	}
+
+	set_irq_regs(old_regs);
 }
 
 void smp_send_reschedule(int cpu)

arch/arm/kernel/time.c

@@ -220,10 +220,10 @@ EXPORT_SYMBOL(leds_event);
 #ifdef CONFIG_LEDS_TIMER
 static inline void do_leds(void)
 {
-	static unsigned int count = 50;
+	static unsigned int count = HZ/2;
 
 	if (--count == 0) {
-		count = 50;
+		count = HZ/2;
 		leds_event(led_timer);
 	}
 }
@@ -327,13 +327,12 @@ EXPORT_SYMBOL(restore_time_delta);
  */
 void timer_tick(void)
 {
-	struct pt_regs *regs = get_irq_regs();
 	profile_tick(CPU_PROFILING);
 	do_leds();
 	do_set_rtc();
 	do_timer(1);
 #ifndef CONFIG_SMP
-	update_process_times(user_mode(regs));
+	update_process_times(user_mode(get_irq_regs()));
 #endif
 }
 

arch/arm/kernel/vmlinux.lds.S

@@ -45,13 +45,7 @@ SECTIONS
 			*(.early_param.init)
 		__early_end = .;
 		__initcall_start = .;
-			*(.initcall1.init)
-			*(.initcall2.init)
-			*(.initcall3.init)
-			*(.initcall4.init)
-			*(.initcall5.init)
-			*(.initcall6.init)
-			*(.initcall7.init)
+			INITCALLS
 		__initcall_end = .;
 		__con_initcall_start = .;
 			*(.con_initcall.init)

arch/arm/mach-footbridge/dc21285.c

@@ -16,6 +16,7 @@
 #include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
+#include <linux/irq.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>

arch/arm/mach-iop32x/n2100.c

@@ -85,7 +85,7 @@ n2100_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 		irq = IRQ_IOP32X_XINT0;
 	} else if (PCI_SLOT(dev->devfn) == 2) {
 		/* RTL8110SB #2 */
-		irq = IRQ_IOP32X_XINT1;
+		irq = IRQ_IOP32X_XINT3;
 	} else if (PCI_SLOT(dev->devfn) == 3) {
 		/* Sil3512 */
 		irq = IRQ_IOP32X_XINT2;

arch/arm/mach-ixp2000/ixdp2400.c

@@ -133,11 +133,13 @@ static void ixdp2400_pci_postinit(void)
 	struct pci_dev *dev;
 
 	if (ixdp2x00_master_npu()) {
-		dev = pci_find_slot(1, IXDP2400_SLAVE_ENET_DEVFN);
+		dev = pci_get_bus_and_slot(1, IXDP2400_SLAVE_ENET_DEVFN);
 		pci_remove_bus_device(dev);
+		pci_dev_put(dev);
 	} else {
-		dev = pci_find_slot(1, IXDP2400_MASTER_ENET_DEVFN);
+		dev = pci_get_bus_and_slot(1, IXDP2400_MASTER_ENET_DEVFN);
 		pci_remove_bus_device(dev);
+		pci_dev_put(dev);
 
 		ixdp2x00_slave_pci_postinit();
 	}

arch/arm/mach-ixp2000/ixdp2800.c

@@ -261,14 +261,16 @@ int __init ixdp2800_pci_init(void)
 
 		pci_common_init(&ixdp2800_pci);
 		if (ixdp2x00_master_npu()) {
-			dev = pci_find_slot(1, IXDP2800_SLAVE_ENET_DEVFN);
+			dev = pci_get_bus_and_slot(1, IXDP2800_SLAVE_ENET_DEVFN);
 			pci_remove_bus_device(dev);
+			pci_dev_put(dev);
 
 			ixdp2800_master_enable_slave();
 			ixdp2800_master_wait_for_slave_bus_scan();
 		} else {
-			dev = pci_find_slot(1, IXDP2800_MASTER_ENET_DEVFN);
+			dev = pci_get_bus_and_slot(1, IXDP2800_MASTER_ENET_DEVFN);
 			pci_remove_bus_device(dev);
+			pci_dev_put(dev);
 		}
 	}
 

arch/arm/mach-ixp2000/ixdp2x00.c

@@ -241,11 +241,14 @@ void ixdp2x00_slave_pci_postinit(void)
 	/*
 	 * Remove PMC device is there is one
 	 */
-	if((dev = pci_find_slot(1, IXDP2X00_PMC_DEVFN)))
+	if((dev = pci_get_bus_and_slot(1, IXDP2X00_PMC_DEVFN))) {
 		pci_remove_bus_device(dev);
+		pci_dev_put(dev);
+	}
 
-	dev = pci_find_slot(0, IXDP2X00_21555_DEVFN);
+	dev = pci_get_bus_and_slot(0, IXDP2X00_21555_DEVFN);
 	pci_remove_bus_device(dev);
+	pci_dev_put(dev);
 }
 
 /**************************************************************************

arch/arm/mach-ixp4xx/common.c

@@ -86,7 +86,8 @@ enum ixp4xx_irq_type {
 	IXP4XX_IRQ_LEVEL, IXP4XX_IRQ_EDGE
 };
 
-static void ixp4xx_config_irq(unsigned irq, enum ixp4xx_irq_type type);
+/* Each bit represents an IRQ: 1: edge-triggered, 0: level triggered */
+static unsigned long long ixp4xx_irq_edge = 0;
 
 /*
  * IRQ -> GPIO mapping table
@@ -135,7 +136,11 @@ static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type)
 	default:
 		return -EINVAL;
 	}
-	ixp4xx_config_irq(irq, irq_type);
+
+	if (irq_type == IXP4XX_IRQ_EDGE)
+		ixp4xx_irq_edge |= (1 << irq);
+	else
+		ixp4xx_irq_edge &= ~(1 << irq);
 
 	if (line >= 8) {	/* pins 8-15 */
 		line -= 8;
@@ -167,14 +172,6 @@ static void ixp4xx_irq_mask(unsigned int irq)
 		*IXP4XX_ICMR &= ~(1 << irq);
 }
 
-static void ixp4xx_irq_unmask(unsigned int irq)
-{
-	if (cpu_is_ixp46x() && irq >= 32)
-		*IXP4XX_ICMR2 |= (1 << (irq - 32));
-	else
-		*IXP4XX_ICMR |= (1 << irq);
-}
-
 static void ixp4xx_irq_ack(unsigned int irq)
 {
 	int line = (irq < 32) ? irq2gpio[irq] : -1;
@@ -187,41 +184,25 @@ static void ixp4xx_irq_ack(unsigned int irq)
  * Level triggered interrupts on GPIO lines can only be cleared when the
  * interrupt condition disappears.
  */
-static void ixp4xx_irq_level_unmask(unsigned int irq)
+static void ixp4xx_irq_unmask(unsigned int irq)
 {
-	ixp4xx_irq_ack(irq);
-	ixp4xx_irq_unmask(irq);
-}
+	if (!(ixp4xx_irq_edge & (1 << irq)))
+		ixp4xx_irq_ack(irq);
 
-static struct irqchip ixp4xx_irq_level_chip = {
-	.ack		= ixp4xx_irq_mask,
-	.mask		= ixp4xx_irq_mask,
-	.unmask		= ixp4xx_irq_level_unmask,
-	.set_type	= ixp4xx_set_irq_type,
-};
+	if (cpu_is_ixp46x() && irq >= 32)
+		*IXP4XX_ICMR2 |= (1 << (irq - 32));
+	else
+		*IXP4XX_ICMR |= (1 << irq);
+}
 
-static struct irqchip ixp4xx_irq_edge_chip = {
+static struct irqchip ixp4xx_irq_chip = {
+	.name		= "IXP4xx",
 	.ack		= ixp4xx_irq_ack,
 	.mask		= ixp4xx_irq_mask,
 	.unmask		= ixp4xx_irq_unmask,
 	.set_type	= ixp4xx_set_irq_type,
 };
 
-static void ixp4xx_config_irq(unsigned irq, enum ixp4xx_irq_type type)
-{
-	switch (type) {
-	case IXP4XX_IRQ_LEVEL:
-		set_irq_chip(irq, &ixp4xx_irq_level_chip);
-		set_irq_handler(irq, do_level_IRQ);
-		break;
-	case IXP4XX_IRQ_EDGE:
-		set_irq_chip(irq, &ixp4xx_irq_edge_chip);
-		set_irq_handler(irq, do_edge_IRQ);
-		break;
-	}
-	set_irq_flags(irq, IRQF_VALID);
-}
-
 void __init ixp4xx_init_irq(void)
 {
 	int i = 0;
@@ -241,8 +222,11 @@ void __init ixp4xx_init_irq(void)
 	}
 
         /* Default to all level triggered */
-	for(i = 0; i < NR_IRQS; i++)
-		ixp4xx_config_irq(i, IXP4XX_IRQ_LEVEL);
+	for(i = 0; i < NR_IRQS; i++) {
+		set_irq_chip(i, &ixp4xx_irq_chip);
+		set_irq_handler(i, do_level_IRQ);
+		set_irq_flags(i, IRQF_VALID);
+	}
 }
 
 

arch/arm/mach-lh7a40x/Kconfig

@@ -14,7 +14,7 @@ config MACH_LPD7A400
 	bool "LPD7A400 Card Engine"
 	select ARCH_LH7A400
 #	select IDE_POLL
-	select HAS_TOUCHSCREEN_ADS7843_LH7
+#	select HAS_TOUCHSCREEN_ADS7843_LH7
 	help
 	  Say Y here if you are using Logic Product Development's
 	  LPD7A400 CardEngine.  For the time being, the LPD7A400 and
@@ -24,7 +24,7 @@ config MACH_LPD7A404
 	bool "LPD7A404 Card Engine"
 	select ARCH_LH7A404
 #	select IDE_POLL
-	select HAS_TOUCHSCREEN_ADC_LH7
+#	select HAS_TOUCHSCREEN_ADC_LH7
 	help
 	  Say Y here if you are using Logic Product Development's
 	  LPD7A404 CardEngine. For the time being, the LPD7A400 and

arch/arm/mach-lh7a40x/common.h

@@ -15,4 +15,4 @@ extern void lh7a404_init_irq (void);
 extern void lh7a40x_clcd_init (void);
 extern void lh7a40x_init_board_irq (void);
 
-#define IRQ_DISPATCH(irq) desc_handle_irq((irq),(irq_desc + irq), regs)
+#define IRQ_DISPATCH(irq) desc_handle_irq((irq),(irq_desc + irq))

arch/arm/mach-pnx4008/core.c

@@ -133,10 +133,79 @@ static struct platform_device serial_device = {
 	},
 };
 
+static struct platform_device nand_flash_device = {
+	.name = "pnx4008-flash",
+	.id = -1,
+	.dev = {
+		.coherent_dma_mask = 0xFFFFFFFF,
+	},
+};
+
+/* The dmamask must be set for OHCI to work */
+static u64 ohci_dmamask = ~(u32) 0;
+
+static struct resource ohci_resources[] = {
+	{
+		.start = IO_ADDRESS(PNX4008_USB_CONFIG_BASE),
+		.end = IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0x100),
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = USB_HOST_INT,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ohci_device = {
+	.name = "pnx4008-usb-ohci",
+	.id = -1,
+	.dev = {
+		.dma_mask = &ohci_dmamask,
+		.coherent_dma_mask = 0xffffffff,
+		},
+	.num_resources = ARRAY_SIZE(ohci_resources),
+	.resource = ohci_resources,
+};
+
+static struct platform_device sdum_device = {
+	.name = "pnx4008-sdum",
+	.id = 0,
+	.dev = {
+		.coherent_dma_mask = 0xffffffff,
+	},
+};
+
+static struct platform_device rgbfb_device = {
+	.name = "pnx4008-rgbfb",
+	.id = 0,
+	.dev = {
+		.coherent_dma_mask = 0xffffffff,
+	}
+};
+
+struct resource watchdog_resources[] = {
+	{
+		.start = PNX4008_WDOG_BASE,
+		.end = PNX4008_WDOG_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device watchdog_device = {
+	.name = "pnx4008-watchdog",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(watchdog_resources),
+	.resource = watchdog_resources,
+};
+
 static struct platform_device *devices[] __initdata = {
 	&spipnx_1,
 	&spipnx_2,
 	&serial_device,
+	&ohci_device,
+	&nand_flash_device,
+	&sdum_device,
+	&rgbfb_device,
+	&watchdog_device,
 };
 
 

arch/arm/mach-pxa/lubbock.c

@@ -397,7 +397,7 @@ static void lubbock_mmc_poll(unsigned long data)
 	if (LUB_IRQ_SET_CLR & (1 << 0))
 		mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
 	else {
-		(void) mmc_detect_int(LUBBOCK_SD_IRQ, (void *)data, NULL);
+		(void) mmc_detect_int(LUBBOCK_SD_IRQ, (void *)data);
 		enable_irq(LUBBOCK_SD_IRQ);
 	}
 }

arch/arm/mach-s3c2410/gpio.c

@@ -3,7 +3,7 @@
  * Copyright (c) 2004-2005 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * S3C2410 GPIO support
+ * S3C24XX GPIO support
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -163,3 +163,22 @@ unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change)
 }
 
 EXPORT_SYMBOL(s3c2410_modify_misccr);
+
+int s3c2410_gpio_getirq(unsigned int pin)
+{
+	if (pin < S3C2410_GPF0 || pin > S3C2410_GPG15)
+		return -1;	/* not valid interrupts */
+
+	if (pin < S3C2410_GPG0 && pin > S3C2410_GPF7)
+		return -1;	/* not valid pin */
+
+	if (pin < S3C2410_GPF4)
+		return (pin - S3C2410_GPF0) + IRQ_EINT0;
+
+	if (pin < S3C2410_GPG0)
+		return (pin - S3C2410_GPF4) + IRQ_EINT4;
+
+	return (pin - S3C2410_GPG0) + IRQ_EINT8;
+}
+
+EXPORT_SYMBOL(s3c2410_gpio_getirq);

arch/arm/mach-s3c2410/s3c2410-gpio.c

@@ -69,22 +69,3 @@ int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
 }
 
 EXPORT_SYMBOL(s3c2410_gpio_irqfilter);
-
-int s3c2410_gpio_getirq(unsigned int pin)
-{
-	if (pin < S3C2410_GPF0 || pin > S3C2410_GPG15)
-		return -1;	/* not valid interrupts */
-
-	if (pin < S3C2410_GPG0 && pin > S3C2410_GPF7)
-		return -1;	/* not valid pin */
-
-	if (pin < S3C2410_GPF4)
-		return (pin - S3C2410_GPF0) + IRQ_EINT0;
-
-	if (pin < S3C2410_GPG0)
-		return (pin - S3C2410_GPF4) + IRQ_EINT4;
-
-	return (pin - S3C2410_GPG0) + IRQ_EINT8;
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_getirq);

arch/arm/mach-sa1100/cpu-sa1110.c

@@ -82,6 +82,14 @@ static struct sdram_params sdram_tbl[] __initdata = {
 		.twr		= 9,
 		.refresh	= 64000,
 		.cas_latency	= 3,
+	}, {    /* Samsung K4S281632B-1H */
+	        .name           = "K4S281632B-1H",
+		.rows           = 12,
+		.tck            = 10,
+		.trp            = 20,
+		.twr            = 10,
+		.refresh        = 64000,
+		.cas_latency    = 3,
 	}, {	/* Samsung KM416S4030CT */
 		.name		= "KM416S4030CT",
 		.rows		= 13,
@@ -366,6 +374,8 @@ static int __init sa1110_clk_init(void)
 
 		if (machine_is_h3100())
 			name = "KM416S4030CT";
+		if (machine_is_jornada720())
+		        name = "K4S281632B-1H";
 	}
 
 	sdram = sa1110_find_sdram(name);

arch/arm/mach-versatile/core.c

@@ -188,12 +188,12 @@ static struct map_desc versatile_io_desc[] __initdata = {
 		.length		= SZ_4K,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	=  VERSATILE_PCI_VIRT_BASE,
+		.virtual	=  (unsigned long)VERSATILE_PCI_VIRT_BASE,
 		.pfn		= __phys_to_pfn(VERSATILE_PCI_BASE),
 		.length		= VERSATILE_PCI_BASE_SIZE,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	=  VERSATILE_PCI_CFG_VIRT_BASE,
+		.virtual	=  (unsigned long)VERSATILE_PCI_CFG_VIRT_BASE,
 		.pfn		= __phys_to_pfn(VERSATILE_PCI_CFG_BASE),
 		.length		= VERSATILE_PCI_CFG_BASE_SIZE,
 		.type		= MT_DEVICE

arch/arm/mach-versatile/pci.c

@@ -40,14 +40,15 @@
  * Cfg   42000000 - 42FFFFFF	  PCI config
  *
  */
-#define SYS_PCICTL			IO_ADDRESS(VERSATILE_SYS_PCICTL)
-#define PCI_IMAP0			IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x0)
-#define PCI_IMAP1			IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x4)
-#define PCI_IMAP2			IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x8)
-#define PCI_SMAP0			IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x10)
-#define PCI_SMAP1			IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x14)
-#define PCI_SMAP2			IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x18)
-#define PCI_SELFID			IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0xc)
+#define __IO_ADDRESS(n) ((void __iomem *)(unsigned long)IO_ADDRESS(n))
+#define SYS_PCICTL		__IO_ADDRESS(VERSATILE_SYS_PCICTL)
+#define PCI_IMAP0		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x0)
+#define PCI_IMAP1		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x4)
+#define PCI_IMAP2		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x8)
+#define PCI_SMAP0		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x10)
+#define PCI_SMAP1		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x14)
+#define PCI_SMAP2		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x18)
+#define PCI_SELFID		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0xc)
 
 #define DEVICE_ID_OFFSET		0x00
 #define CSR_OFFSET			0x04
@@ -76,7 +77,7 @@ static int __init versatile_pci_slot_ignore(char *str)
 __setup("pci_slot_ignore=", versatile_pci_slot_ignore);
 
 
-static unsigned long __pci_addr(struct pci_bus *bus,
+static void __iomem *__pci_addr(struct pci_bus *bus,
 				unsigned int devfn, int offset)
 {
 	unsigned int busnr = bus->number;
@@ -91,14 +92,14 @@ static unsigned long __pci_addr(struct pci_bus *bus,
 	if (devfn > 255)
 		BUG();
 
-	return (VERSATILE_PCI_CFG_VIRT_BASE | (busnr << 16) |
+	return VERSATILE_PCI_CFG_VIRT_BASE + ((busnr << 16) |
 		(PCI_SLOT(devfn) << 11) | (PCI_FUNC(devfn) << 8) | offset);
 }
 
 static int versatile_read_config(struct pci_bus *bus, unsigned int devfn, int where,
 				 int size, u32 *val)
 {
-	unsigned long addr = __pci_addr(bus, devfn, where);
+	void __iomem *addr = __pci_addr(bus, devfn, where & ~3);
 	u32 v;
 	int slot = PCI_SLOT(devfn);
 
@@ -121,13 +122,12 @@ static int versatile_read_config(struct pci_bus *bus, unsigned int devfn, int wh
 			break;
 
 		case 2:
-			v = __raw_readl(addr & ~3);
-			if (addr & 2) v >>= 16;
+			v = __raw_readl(addr);
+			if (where & 2) v >>= 16;
  			v &= 0xffff;
 			break;
 
 		default:
-			addr &= ~3;
 			v = __raw_readl(addr);
 			break;
 		}
@@ -140,7 +140,7 @@ static int versatile_read_config(struct pci_bus *bus, unsigned int devfn, int wh
 static int versatile_write_config(struct pci_bus *bus, unsigned int devfn, int where,
 				  int size, u32 val)
 {
-	unsigned long addr = __pci_addr(bus, devfn, where);
+	void __iomem *addr = __pci_addr(bus, devfn, where);
 	int slot = PCI_SLOT(devfn);
 
 	if (pci_slot_ignore & (1 << slot)) {
@@ -279,7 +279,7 @@ int __init pci_versatile_setup(int nr, struct pci_sys_data *sys)
 	printk("PCI core found (slot %d)\n",myslot);
 
 	__raw_writel(myslot, PCI_SELFID);
-	local_pci_cfg_base = (void *) VERSATILE_PCI_CFG_VIRT_BASE + (myslot << 11);
+	local_pci_cfg_base = VERSATILE_PCI_CFG_VIRT_BASE + (myslot << 11);
 
 	val = __raw_readl(local_pci_cfg_base + CSR_OFFSET);
 	val |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE;

arch/arm/mm/init.c

@@ -32,40 +32,51 @@ extern unsigned long phys_initrd_start;
 extern unsigned long phys_initrd_size;
 
 /*
- * The sole use of this is to pass memory configuration
- * data from paging_init to mem_init.
+ * This is used to pass memory configuration data from paging_init
+ * to mem_init, and by show_mem() to skip holes in the memory map.
  */
-static struct meminfo meminfo __initdata = { 0, };
+static struct meminfo meminfo = { 0, };
+
+#define for_each_nodebank(iter,mi,no)			\
+	for (iter = 0; iter < mi->nr_banks; iter++)	\
+		if (mi->bank[iter].node == no)
 
 void show_mem(void)
 {
 	int free = 0, total = 0, reserved = 0;
-	int shared = 0, cached = 0, slab = 0, node;
+	int shared = 0, cached = 0, slab = 0, node, i;
+	struct meminfo * mi = &meminfo;
 
 	printk("Mem-info:\n");
 	show_free_areas();
 	printk("Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
 
 	for_each_online_node(node) {
-		struct page *page, *end;
-
-		page = NODE_MEM_MAP(node);
-		end  = page + NODE_DATA(node)->node_spanned_pages;
-
-		do {
-			total++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (PageSlab(page))
-				slab++;
-			else if (!page_count(page))
-				free++;
-			else
-				shared += page_count(page) - 1;
-			page++;
-		} while (page < end);
+		for_each_nodebank (i,mi,node) {
+			unsigned int pfn1, pfn2;
+			struct page *page, *end;
+
+			pfn1 = mi->bank[i].start >> PAGE_SHIFT;
+			pfn2 = (mi->bank[i].size + mi->bank[i].start) >> PAGE_SHIFT;
+
+			page = NODE_MEM_MAP(node) + pfn1;
+			end  = NODE_MEM_MAP(node) + pfn2;
+
+			do {
+				total++;
+				if (PageReserved(page))
+					reserved++;
+				else if (PageSwapCache(page))
+					cached++;
+				else if (PageSlab(page))
+					slab++;
+				else if (!page_count(page))
+					free++;
+				else
+					shared += page_count(page) - 1;
+				page++;
+			} while (page < end);
+		}
 	}
 
 	printk("%d pages of RAM\n", total);
@@ -76,10 +87,6 @@ void show_mem(void)
 	printk("%d pages swap cached\n", cached);
 }
 
-#define for_each_nodebank(iter,mi,no)			\
-	for (iter = 0; iter < mi->nr_banks; iter++)	\
-		if (mi->bank[iter].node == no)
-
 /*
  * FIXME: We really want to avoid allocating the bootmap bitmap
  * over the top of the initrd.  Hopefully, this is located towards

arch/arm/mm/proc-xscale.S

@@ -909,7 +909,7 @@ __pxa270_proc_info:
 	b	__xscale_setup
 	.long	cpu_arch_name
 	.long	cpu_elf_name
-	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_IWMMXT
 	.long	cpu_pxa270_name
 	.long	xscale_processor_functions
 	.long	v4wbi_tlb_fns

arch/arm/oprofile/op_counter.h

@@ -10,8 +10,6 @@
 #ifndef OP_COUNTER_H
 #define OP_COUNTER_H
 
-#define OP_MAX_COUNTER 5
-
 /* Per performance monitor configuration as set via
  * oprofilefs.
  */

arch/arm/oprofile/op_model_xscale.c

@@ -20,7 +20,8 @@
 #include <linux/sched.h>
 #include <linux/oprofile.h>
 #include <linux/interrupt.h>
-#include <asm/irq.h>
+#include <linux/irq.h>
+
 #include <asm/system.h>
 
 #include "op_counter.h"

arch/arm/tools/mach-types

@@ -4,7 +4,7 @@
 #
 # Up to date versions of this file can be obtained from:
 #
-#   http://www.arm.linux.org.uk/developer/machines/?action=download
+#   http://www.arm.linux.org.uk/developer/machines/download.php
 #
 # Please do not send patches to this file; it is automatically generated!
 # To add an entry into this database, please see Documentation/arm/README,
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Sat Sep 23 13:20:43 2006
+# Last update: Mon Oct 16 21:13:36 2006
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -1157,3 +1157,17 @@ adsturboxb		MACH_ADSTURBOXB		ADSTURBOXB		1143
 oti4110			MACH_OTI4110		OTI4110			1144
 hme_pxa			MACH_HME_PXA		HME_PXA			1145
 deisterdca		MACH_DEISTERDCA		DEISTERDCA		1146
+ces_ssem2		MACH_CES_SSEM2		CES_SSEM2		1147
+ces_mtr			MACH_CES_MTR		CES_MTR			1148
+tds_avng_sbc		MACH_TDS_AVNG_SBC	TDS_AVNG_SBC		1149
+everest			MACH_EVEREST		EVEREST			1150
+pnx4010			MACH_PNX4010		PNX4010			1151
+oxnas			MACH_OXNAS		OXNAS			1152
+fiori			MACH_FIORI		FIORI			1153
+ml1200			MACH_ML1200		ML1200			1154
+cactus			MACH_CACTUS		CACTUS			1155
+nb2xxx			MACH_NB2XXX		NB2XXX			1156
+hw6900			MACH_HW6900		HW6900			1157
+cdcs_quoll		MACH_CDCS_QUOLL		CDCS_QUOLL		1158
+quicksilver		MACH_QUICKSILVER	QUICKSILVER		1159
+uplat926		MACH_UPLAT926		UPLAT926		1160

arch/arm/vfp/vfpdouble.c

@@ -56,7 +56,7 @@ static void vfp_double_normalise_denormal(struct vfp_double *vd)
 {
 	int bits = 31 - fls(vd->significand >> 32);
 	if (bits == 31)
-		bits = 62 - fls(vd->significand);
+		bits = 63 - fls(vd->significand);
 
 	vfp_double_dump("normalise_denormal: in", vd);
 

arch/arm/vfp/vfpmodule.c

@@ -90,7 +90,7 @@ void vfp_raise_sigfpe(unsigned int sicode, struct pt_regs *regs)
 
 	info.si_signo = SIGFPE;
 	info.si_code = sicode;
-	info.si_addr = (void *)(instruction_pointer(regs) - 4);
+	info.si_addr = (void __user *)(instruction_pointer(regs) - 4);
 
 	/*
 	 * This is the same as NWFPE, because it's not clear what
@@ -148,6 +148,7 @@ static void vfp_raise_exceptions(u32 exceptions, u32 inst, u32 fpscr, struct pt_
 	/*
 	 * These are arranged in priority order, least to highest.
 	 */
+	RAISE(FPSCR_DZC, FPSCR_DZE, FPE_FLTDIV);
 	RAISE(FPSCR_IXC, FPSCR_IXE, FPE_FLTRES);
 	RAISE(FPSCR_UFC, FPSCR_UFE, FPE_FLTUND);
 	RAISE(FPSCR_OFC, FPSCR_OFE, FPE_FLTOVF);

arch/arm26/kernel/armksyms.c

@@ -202,14 +202,6 @@ EXPORT_SYMBOL(_find_next_zero_bit_le);
 EXPORT_SYMBOL(elf_platform);
 EXPORT_SYMBOL(elf_hwcap);
 
-	/* syscalls */
-EXPORT_SYMBOL(sys_write);
-EXPORT_SYMBOL(sys_read);
-EXPORT_SYMBOL(sys_lseek);
-EXPORT_SYMBOL(sys_open);
-EXPORT_SYMBOL(sys_exit);
-EXPORT_SYMBOL(sys_wait4);
-
 #ifdef CONFIG_PREEMPT
 EXPORT_SYMBOL(kernel_flag);
 #endif

arch/avr32/Makefile

@@ -7,7 +7,7 @@
 
 # Default target when executing plain make
 .PHONY: all
-all: uImage vmlinux.elf linux.lst
+all: uImage vmlinux.elf
 
 KBUILD_DEFCONFIG	:= atstk1002_defconfig
 
@@ -21,9 +21,7 @@ cpuflags-$(CONFIG_CPU_AP7000)	+= -mcpu=ap7000
 CFLAGS		+= $(cpuflags-y)
 AFLAGS		+= $(cpuflags-y)
 
-CHECKFLAGS	+= -D__avr32__
-
-LIBGCC		:= $(shell $(CC) $(CFLAGS) -print-libgcc-file-name)
+CHECKFLAGS	+= -D__avr32__ -D__BIG_ENDIAN
 
 head-$(CONFIG_LOADER_U_BOOT)		+= arch/avr32/boot/u-boot/head.o
 head-y					+= arch/avr32/kernel/head.o
@@ -32,7 +30,7 @@ core-$(CONFIG_BOARD_ATSTK1000)		+= arch/avr32/boards/atstk1000/
 core-$(CONFIG_LOADER_U_BOOT)		+= arch/avr32/boot/u-boot/
 core-y					+= arch/avr32/kernel/
 core-y					+= arch/avr32/mm/
-libs-y					+= arch/avr32/lib/ #$(LIBGCC)
+libs-y					+= arch/avr32/lib/
 
 archincdir-$(CONFIG_PLATFORM_AT32AP)	:= arch-at32ap
 
@@ -48,6 +46,8 @@ endif
 
 archprepare: include/asm-avr32/.arch
 
+CLEAN_FILES += include/asm-avr32/.arch include/asm-avr32/arch
+
 BOOT_TARGETS := vmlinux.elf vmlinux.bin uImage uImage.srec
 
 .PHONY: $(BOOT_TARGETS) install
@@ -71,14 +71,19 @@ vmlinux.elf vmlinux.bin uImage.srec uImage vmlinux.cso: vmlinux
 install: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) $@
 
-linux.s: vmlinux
+vmlinux.s: vmlinux
 	$(call if_changed,disasm)
 
-linux.lst: vmlinux
+vmlinux.lst: vmlinux
 	$(call if_changed,listing)
 
+CLEAN_FILES += vmlinux.s vmlinux.lst
+
+archclean:
+	$(Q)$(MAKE) $(clean)=$(boot)
+
 define archhelp
   @echo '* vmlinux.elf		- ELF image with load address 0'
   @echo '  vmlinux.cso		- PathFinder CSO image'
-  @echo '  uImage		- Create a bootable image for U-Boot'
+  @echo '* uImage		- Create a bootable image for U-Boot'
 endef

arch/avr32/boards/atstk1000/setup.c

@@ -21,15 +21,6 @@ struct tag *bootloader_tags __initdata;
 
 struct lcdc_platform_data __initdata atstk1000_fb0_data;
 
-asmlinkage void __init board_early_init(void)
-{
-	extern void sdram_init(void);
-
-#ifdef CONFIG_LOADER_STANDALONE
-	sdram_init();
-#endif
-}
-
 void __init board_setup_fbmem(unsigned long fbmem_start,
 			      unsigned long fbmem_size)
 {

arch/avr32/boot/images/Makefile

@@ -37,14 +37,12 @@ OBJCOPYFLAGS_vmlinux.elf := --change-section-lma .text-0x80000000 \
 			    --change-section-lma .data-0x80000000 \
 			    --change-section-lma .init-0x80000000 \
 			    --change-section-lma .bss-0x80000000 \
-			    --change-section-lma .initrd-0x80000000 \
 			    --change-section-lma __param-0x80000000 \
 			    --change-section-lma __ksymtab-0x80000000 \
 			    --change-section-lma __ksymtab_gpl-0x80000000 \
 			    --change-section-lma __kcrctab-0x80000000 \
 			    --change-section-lma __kcrctab_gpl-0x80000000 \
 			    --change-section-lma __ksymtab_strings-0x80000000 \
-			    --change-section-lma .got-0x80000000 \
 			    --set-start 0xa0000000
 $(obj)/vmlinux.elf: vmlinux FORCE
 	$(call if_changed,objcopy)
@@ -59,4 +57,4 @@ install: $(BOOTIMAGE)
 	sh $(srctree)/install-kernel.sh $<
 
 # Generated files to be removed upon make clean
-clean-files	:= vmlinux* uImage uImage.srec
+clean-files	:= vmlinux.elf vmlinux.bin vmlinux.gz uImage uImage.srec

arch/avr32/configs/atstk1002_defconfig

@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Tue Jul 11 12:41:36 2006
+# Linux kernel version: 2.6.19-rc2
+# Fri Oct 20 11:52:37 2006
 #
 CONFIG_AVR32=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -25,16 +26,23 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+# CONFIG_UTS_NS is not set
+CONFIG_AUDIT=y
 # CONFIG_IKCONFIG is not set
-# CONFIG_RELAY is not set
+CONFIG_RELAY=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_TASK_XACCT is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -43,14 +51,15 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 # CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-# CONFIG_SLAB is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
-CONFIG_SLOB=y
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -65,6 +74,7 @@ CONFIG_MODULE_UNLOAD=y
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 
 #
@@ -166,10 +176,12 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
@@ -199,7 +211,6 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -212,7 +223,6 @@ CONFIG_TCP_CONG_BIC=y
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
@@ -239,7 +249,84 @@ CONFIG_STANDALONE=y
 #
 # Memory Technology Devices (MTD)
 #
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
 
 #
 # Parallel port support
@@ -260,10 +347,17 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=m
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 
+#
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
 #
 # ATA/ATAPI/MFM/RLL support
 #
@@ -274,6 +368,12 @@ CONFIG_BLK_DEV_INITRD=y
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -305,14 +405,11 @@ CONFIG_TUN=m
 #
 # PHY device support
 #
-# CONFIG_PHYLIB is not set
 
 #
 # Ethernet (10 or 100Mbit)
 #
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_MACB=y
+# CONFIG_NET_ETHERNET is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -341,10 +438,11 @@ CONFIG_PPP=m
 CONFIG_PPP_ASYNC=m
 # CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
-# CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_BSDCOMP=m
 # CONFIG_PPP_MPPE is not set
 # CONFIG_PPPOE is not set
 # CONFIG_SLIP is not set
+CONFIG_SLHC=m
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
@@ -417,7 +515,6 @@ CONFIG_UNIX98_PTYS=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -427,23 +524,13 @@ CONFIG_UNIX98_PTYS=y
 #
 # SPI support
 #
-CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_ATMEL=m
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
 
 #
 # Dallas's 1-wire bus
 #
+# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -451,15 +538,10 @@ CONFIG_SPI_ATMEL=m
 # CONFIG_HWMON is not set
 # CONFIG_HWMON_VID is not set
 
-#
-# Misc devices
-#
-
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -470,28 +552,8 @@ CONFIG_VIDEO_V4L2=y
 # Graphics support
 #
 # CONFIG_FIRMWARE_EDID is not set
-CONFIG_FB=m
-CONFIG_FB_CFB_FILLRECT=m
-CONFIG_FB_CFB_COPYAREA=m
-CONFIG_FB_CFB_IMAGEBLIT=m
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-CONFIG_FB_SIDSA=m
-CONFIG_FB_SIDSA_DEFAULT_BPP=24
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
-CONFIG_LCD_CLASS_DEVICE=m
-CONFIG_LCD_DEVICE=y
-CONFIG_LCD_LTV350QV=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -561,18 +623,21 @@ CONFIG_LCD_LTV350QV=m
 #
 # File systems
 #
-CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS=m
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_MINIX_FS=m
-CONFIG_ROMFS_FS=m
-# CONFIG_INOTIFY is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
@@ -600,8 +665,10 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 CONFIG_CONFIGFS_FS=m
@@ -616,6 +683,16 @@ CONFIG_CONFIGFS_FS=m
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_HPFS_FS is not set
@@ -626,26 +703,10 @@ CONFIG_CONFIGFS_FS=m
 #
 # Network File Systems
 #
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -665,7 +726,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
 # CONFIG_NLS_CODEPAGE_737 is not set
 # CONFIG_NLS_CODEPAGE_775 is not set
-CONFIG_NLS_CODEPAGE_850=m
+# CONFIG_NLS_CODEPAGE_850 is not set
 # CONFIG_NLS_CODEPAGE_852 is not set
 # CONFIG_NLS_CODEPAGE_855 is not set
 # CONFIG_NLS_CODEPAGE_857 is not set
@@ -705,13 +766,17 @@ CONFIG_NLS_UTF8=m
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_PRINTK_TIME=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_RWSEMS is not set
@@ -722,11 +787,13 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_UNWIND_INFO is not set
 CONFIG_FORCED_INLINING=y
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_RCU_TORTURE_TEST is not set
-CONFIG_KPROBES=y
+# CONFIG_KPROBES is not set
 
 #
 # Security options
@@ -739,16 +806,14 @@ CONFIG_KPROBES=y
 #
 # CONFIG_CRYPTO is not set
 
-#
-# Hardware crypto devices
-#
-
 #
 # Library routines
 #
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
-CONFIG_CRC32=m
+CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y

arch/avr32/kernel/avr32_ksyms.c

@@ -7,6 +7,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#include <linux/io.h>
 #include <linux/module.h>
 
 #include <asm/checksum.h>
@@ -53,3 +54,11 @@ EXPORT_SYMBOL(find_next_zero_bit);
 EXPORT_SYMBOL(find_first_bit);
 EXPORT_SYMBOL(find_next_bit);
 EXPORT_SYMBOL(generic_find_next_zero_le_bit);
+
+/* I/O primitives (lib/io-*.S) */
+EXPORT_SYMBOL(__raw_readsb);
+EXPORT_SYMBOL(__raw_readsw);
+EXPORT_SYMBOL(__raw_readsl);
+EXPORT_SYMBOL(__raw_writesb);
+EXPORT_SYMBOL(__raw_writesw);
+EXPORT_SYMBOL(__raw_writesl);

arch/avr32/kernel/head.S

@@ -30,9 +30,6 @@ kernel_entry:
 	mov	r7, 0
 #endif
 
-	/* Set up the PIO, SDRAM controller, early printk, etc. */
-	rcall	board_early_init
-
 	/* Start the show */
 	lddpc   pc, kernel_start_addr