Merge branch 'master' into next

Documentation/filesystems/tmpfs.txt

@@ -133,4 +133,4 @@ RAM/SWAP in 10240 inodes and it is only accessible by root.
 Author:
    Christoph Rohland <cr@sap.com>, 1.12.01
 Updated:
-   Hugh Dickins <hugh@veritas.com>, 4 June 2007
+   Hugh Dickins, 4 June 2007

Documentation/hwmon/sysfs-interface

@@ -150,6 +150,11 @@ fan[1-*]_min	Fan minimum value
 		Unit: revolution/min (RPM)
 		RW
 
+fan[1-*]_max	Fan maximum value
+		Unit: revolution/min (RPM)
+		Only rarely supported by the hardware.
+		RW
+
 fan[1-*]_input	Fan input value.
 		Unit: revolution/min (RPM)
 		RO
@@ -390,6 +395,7 @@ OR
 in[0-*]_min_alarm
 in[0-*]_max_alarm
 fan[1-*]_min_alarm
+fan[1-*]_max_alarm
 temp[1-*]_min_alarm
 temp[1-*]_max_alarm
 temp[1-*]_crit_alarm

Documentation/input/multi-touch-protocol.txt

@@ -18,8 +18,12 @@ Usage
 Anonymous finger details are sent sequentially as separate packets of ABS
 events. Only the ABS_MT events are recognized as part of a finger
 packet. The end of a packet is marked by calling the input_mt_sync()
-function, which generates a SYN_MT_REPORT event. The end of multi-touch
-transfer is marked by calling the usual input_sync() function.
+function, which generates a SYN_MT_REPORT event. This instructs the
+receiver to accept the data for the current finger and prepare to receive
+another. The end of a multi-touch transfer is marked by calling the usual
+input_sync() function. This instructs the receiver to act upon events
+accumulated since last EV_SYN/SYN_REPORT and prepare to receive a new
+set of events/packets.
 
 A set of ABS_MT events with the desired properties is defined. The events
 are divided into categories, to allow for partial implementation.  The
@@ -27,11 +31,26 @@ minimum set consists of ABS_MT_TOUCH_MAJOR, ABS_MT_POSITION_X and
 ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked.  If the
 device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide the size
 of the approaching finger. Anisotropy and direction may be specified with
-ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. Devices with
-more granular information may specify general shapes as blobs, i.e., as a
-sequence of rectangular shapes grouped together by an
-ABS_MT_BLOB_ID. Finally, the ABS_MT_TOOL_TYPE may be used to specify
-whether the touching tool is a finger or a pen or something else.
+ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION.  The
+ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a
+finger or a pen or something else.  Devices with more granular information
+may specify general shapes as blobs, i.e., as a sequence of rectangular
+shapes grouped together by an ABS_MT_BLOB_ID. Finally, for the few devices
+that currently support it, the ABS_MT_TRACKING_ID event may be used to
+report finger tracking from hardware [5].
+
+Here is what a minimal event sequence for a two-finger touch would look
+like:
+
+   ABS_MT_TOUCH_MAJOR
+   ABS_MT_POSITION_X
+   ABS_MT_POSITION_Y
+   SYN_MT_REPORT
+   ABS_MT_TOUCH_MAJOR
+   ABS_MT_POSITION_X
+   ABS_MT_POSITION_Y
+   SYN_MT_REPORT
+   SYN_REPORT
 
 
 Event Semantics
@@ -44,24 +63,24 @@ ABS_MT_TOUCH_MAJOR
 
 The length of the major axis of the contact. The length should be given in
 surface units. If the surface has an X times Y resolution, the largest
-possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal.
+possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal [4].
 
 ABS_MT_TOUCH_MINOR
 
 The length, in surface units, of the minor axis of the contact. If the
-contact is circular, this event can be omitted.
+contact is circular, this event can be omitted [4].
 
 ABS_MT_WIDTH_MAJOR
 
 The length, in surface units, of the major axis of the approaching
 tool. This should be understood as the size of the tool itself. The
 orientation of the contact and the approaching tool are assumed to be the
-same.
+same [4].
 
 ABS_MT_WIDTH_MINOR
 
 The length, in surface units, of the minor axis of the approaching
-tool. Omit if circular.
+tool. Omit if circular [4].
 
 The above four values can be used to derive additional information about
 the contact. The ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR approximates
@@ -70,14 +89,17 @@ different characteristic widths [1].
 
 ABS_MT_ORIENTATION
 
-The orientation of the ellipse. The value should describe half a revolution
-clockwise around the touch center. The scale of the value is arbitrary, but
-zero should be returned for an ellipse aligned along the Y axis of the
-surface. As an example, an index finger placed straight onto the axis could
-return zero orientation, something negative when twisted to the left, and
-something positive when twisted to the right. This value can be omitted if
-the touching object is circular, or if the information is not available in
-the kernel driver.
+The orientation of the ellipse. The value should describe a signed quarter
+of a revolution clockwise around the touch center. The signed value range
+is arbitrary, but zero should be returned for a finger aligned along the Y
+axis of the surface, a negative value when finger is turned to the left, and
+a positive value when finger turned to the right. When completely aligned with
+the X axis, the range max should be returned.  Orientation can be omitted
+if the touching object is circular, or if the information is not available
+in the kernel driver. Partial orientation support is possible if the device
+can distinguish between the two axis, but not (uniquely) any values in
+between. In such cases, the range of ABS_MT_ORIENTATION should be [0, 1]
+[4].
 
 ABS_MT_POSITION_X
 
@@ -98,8 +120,35 @@ ABS_MT_BLOB_ID
 
 The BLOB_ID groups several packets together into one arbitrarily shaped
 contact. This is a low-level anonymous grouping, and should not be confused
-with the high-level contactID, explained below. Most kernel drivers will
-not have this capability, and can safely omit the event.
+with the high-level trackingID [5]. Most kernel drivers will not have blob
+capability, and can safely omit the event.
+
+ABS_MT_TRACKING_ID
+
+The TRACKING_ID identifies an initiated contact throughout its life cycle
+[5]. There are currently only a few devices that support it, so this event
+should normally be omitted.
+
+
+Event Computation
+-----------------
+
+The flora of different hardware unavoidably leads to some devices fitting
+better to the MT protocol than others. To simplify and unify the mapping,
+this section gives recipes for how to compute certain events.
+
+For devices reporting contacts as rectangular shapes, signed orientation
+cannot be obtained. Assuming X and Y are the lengths of the sides of the
+touching rectangle, here is a simple formula that retains the most
+information possible:
+
+   ABS_MT_TOUCH_MAJOR := max(X, Y)
+   ABS_MT_TOUCH_MINOR := min(X, Y)
+   ABS_MT_ORIENTATION := bool(X > Y)
+
+The range of ABS_MT_ORIENTATION should be set to [0, 1], to indicate that
+the device can distinguish between a finger along the Y axis (0) and a
+finger along the X axis (1).
 
 
 Finger Tracking
@@ -109,14 +158,18 @@ The kernel driver should generate an arbitrary enumeration of the set of
 anonymous contacts currently on the surface. The order in which the packets
 appear in the event stream is not important.
 
-The process of finger tracking, i.e., to assign a unique contactID to each
+The process of finger tracking, i.e., to assign a unique trackingID to each
 initiated contact on the surface, is left to user space; preferably the
-multi-touch X driver [3]. In that driver, the contactID stays the same and
+multi-touch X driver [3]. In that driver, the trackingID stays the same and
 unique until the contact vanishes (when the finger leaves the surface). The
 problem of assigning a set of anonymous fingers to a set of identified
 fingers is a euclidian bipartite matching problem at each event update, and
 relies on a sufficiently rapid update rate.
 
+There are a few devices that support trackingID in hardware. User space can
+make use of these native identifiers to reduce bandwidth and cpu usage.
+
+
 Notes
 -----
 
@@ -136,5 +189,7 @@ could be used to derive tilt.
 time of writing (April 2009), the MT protocol is not yet merged, and the
 prototype implements finger matching, basic mouse support and two-finger
 scrolling. The project aims at improving the quality of current multi-touch
-functionality available in the synaptics X driver, and in addition
+functionality available in the Synaptics X driver, and in addition
 implement more advanced gestures.
+[4] See the section on event computation.
+[5] See the section on finger tracking.

Documentation/kernel-parameters.txt

@@ -1541,6 +1541,10 @@ and is between 256 and 4096 characters. It is defined in the file
 			register save and restore. The kernel will only save
 			legacy floating-point registers on task switch.
 
+	noxsave		[BUGS=X86] Disables x86 extended register state save
+			and restore using xsave. The kernel will fallback to
+			enabling legacy floating-point and sse state.
+
 	nohlt		[BUGS=ARM,SH] Tells the kernel that the sleep(SH) or
 			wfi(ARM) instruction doesn't work correctly and not to
 			use it. This is also useful when using JTAG debugger.

Documentation/sound/alsa/HD-Audio-Models.txt

@@ -334,6 +334,7 @@ STAC9227/9228/9229/927x
   ref-no-jd	Reference board without HP/Mic jack detection
   3stack	D965 3stack
   5stack	D965 5stack + SPDIF
+  5stack-no-fp	D965 5stack without front panel
   dell-3stack	Dell Dimension E520
   dell-bios	Fixes with Dell BIOS setup
   auto		BIOS setup (default)

Documentation/sound/alsa/Procfile.txt

@@ -104,6 +104,11 @@ card*/pcm*/xrun_debug
 	When this value is greater than 1, the driver will show the
 	stack trace additionally.  This may help the debugging.
 
+	Since 2.6.30, this option also enables the hwptr check using
+	jiffies.  This detects spontaneous invalid pointer callback
+	values, but can be lead to too much corrections for a (mostly
+	buggy) hardware that doesn't give smooth pointer updates.
+
 card*/pcm*/sub*/info
 	The general information of this PCM sub-stream.
 

MAINTAINERS

@@ -434,7 +434,7 @@ F:	arch/alpha/
 
 AMD GEODE CS5536 USB DEVICE CONTROLLER DRIVER
 P:	Thomas Dahlmann
-M:	thomas.dahlmann@amd.com
+M:	dahlmann.thomas@arcor.de
 L:	linux-geode@lists.infradead.org (moderated for non-subscribers)
 S:	Supported
 F:	drivers/usb/gadget/amd5536udc.*
@@ -624,6 +624,7 @@ M:	paulius.zaleckas@teltonika.lt
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 T:	git git://gitorious.org/linux-gemini/mainline.git
 S:	Maintained
+F:	arch/arm/mach-gemini/
 
 ARM/EBSA110 MACHINE SUPPORT
 P:	Russell King
@@ -650,6 +651,7 @@ P:	Paulius Zaleckas
 M:	paulius.zaleckas@teltonika.lt
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
+F:	arch/arm/mm/*-fa*
 
 ARM/FOOTBRIDGE ARCHITECTURE
 P:	Russell King
@@ -1132,17 +1134,17 @@ F:	fs/bfs/
 F:	include/linux/bfs_fs.h
 
 BLACKFIN ARCHITECTURE
-P:	Bryan Wu
-M:	cooloney@kernel.org
+P:	Mike Frysinger
+M:	vapier@gentoo.org
 L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
 F:	arch/blackfin/
 
 BLACKFIN EMAC DRIVER
-P:	Bryan Wu
-M:	cooloney@kernel.org
-L:	uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+P:	Michael Hennerich
+M:	michael.hennerich@analog.com
+L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
 F:	drivers/net/bfin_mac.*
@@ -1150,7 +1152,7 @@ F:	drivers/net/bfin_mac.*
 BLACKFIN RTC DRIVER
 P:	Mike Frysinger
 M:	vapier.adi@gmail.com
-L:	uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
 F:	drivers/rtc/rtc-bfin.c
@@ -1158,7 +1160,7 @@ F:	drivers/rtc/rtc-bfin.c
 BLACKFIN SERIAL DRIVER
 P:	Sonic Zhang
 M:	sonic.zhang@analog.com
-L:	uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
 F:	drivers/serial/bfin_5xx.c
@@ -1166,7 +1168,7 @@ F:	drivers/serial/bfin_5xx.c
 BLACKFIN WATCHDOG DRIVER
 P:	Mike Frysinger
 M:	vapier.adi@gmail.com
-L:	uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
 F:	drivers/watchdog/bfin_wdt.c
@@ -1174,7 +1176,7 @@ F:	drivers/watchdog/bfin_wdt.c
 BLACKFIN I2C TWI DRIVER
 P:	Sonic Zhang
 M:	sonic.zhang@analog.com
-L:	uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org/
 S:	Supported
 F:	drivers/i2c/busses/i2c-bfin-twi.c
@@ -1431,6 +1433,14 @@ P:	Russell King
 M:	linux@arm.linux.org.uk
 F:	include/linux/clk.h
 
+CISCO FCOE HBA DRIVER
+P:	Abhijeet Joglekar
+M:	abjoglek@cisco.com
+P:	Joe Eykholt
+M:	jeykholt@cisco.com
+L:	linux-scsi@vger.kernel.org
+S:	Supported
+
 CODA FILE SYSTEM
 P:	Jan Harkes
 M:	jaharkes@cs.cmu.edu
@@ -1532,6 +1542,13 @@ W:	http://www.fi.muni.cz/~kas/cosa/
 S:	Maintained
 F:	drivers/net/wan/cosa*
 
+CPMAC ETHERNET DRIVER
+P:	Florian Fainelli
+M:	florian@openwrt.org
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	drivers/net/cpmac.c
+
 CPU FREQUENCY DRIVERS
 P:	Dave Jones
 M:	davej@redhat.com
@@ -1963,8 +1980,8 @@ F:	include/linux/edac.h
 
 EDAC-E752X
 P:	Mark Gross
-P:	Doug Thompson
 M:	mark.gross@intel.com
+P:	Doug Thompson
 M:	dougthompson@xmission.com
 L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
@@ -2241,7 +2258,7 @@ P:	Li Yang
 M:	leoli@freescale.com
 P:	Zhang Wei
 M:	zw@zh-kernel.org
-L:	linuxppc-embedded@ozlabs.org
+L:	linuxppc-dev@ozlabs.org
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	drivers/dma/fsldma.*
@@ -5579,6 +5596,14 @@ M:	ian@mnementh.co.uk
 S:	Maintained
 F:	drivers/mmc/host/tmio_mmc.*
 
+TMPFS (SHMEM FILESYSTEM)
+P:	Hugh Dickins
+M:	hugh.dickins@tiscali.co.uk
+L:	linux-mm@kvack.org
+S:	Maintained
+F:	include/linux/shmem_fs.h
+F:	mm/shmem.c
+
 TPM DEVICE DRIVER
 P:	Debora Velarde
 M:	debora@linux.vnet.ibm.com

Makefile

@@ -1,8 +1,8 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 30
-EXTRAVERSION = -rc6
-NAME = Vindictive Armadillo
+EXTRAVERSION = -rc8
+NAME = Man-Eating Seals of Antiquity
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"
@@ -533,7 +533,7 @@ endif
 
 include $(srctree)/arch/$(SRCARCH)/Makefile
 
-ifneq (CONFIG_FRAME_WARN,0)
+ifneq ($(CONFIG_FRAME_WARN),0)
 KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN})
 endif
 

arch/arm/include/asm/assembler.h

@@ -114,3 +114,16 @@
 	.align	3;				\
 	.long	9999b,9001f;			\
 	.previous
+
+/*
+ * SMP data memory barrier
+ */
+	.macro	smp_dmb
+#ifdef CONFIG_SMP
+#if __LINUX_ARM_ARCH__ >= 7
+	dmb
+#elif __LINUX_ARM_ARCH__ == 6
+	mcr	p15, 0, r0, c7, c10, 5	@ dmb
+#endif
+#endif
+	.endm

arch/arm/include/asm/atomic.h

@@ -44,11 +44,29 @@ static inline void atomic_set(atomic_t *v, int i)
 	: "cc");
 }
 
+static inline void atomic_add(int i, atomic_t *v)
+{
+	unsigned long tmp;
+	int result;
+
+	__asm__ __volatile__("@ atomic_add\n"
+"1:	ldrex	%0, [%2]\n"
+"	add	%0, %0, %3\n"
+"	strex	%1, %0, [%2]\n"
+"	teq	%1, #0\n"
+"	bne	1b"
+	: "=&r" (result), "=&r" (tmp)
+	: "r" (&v->counter), "Ir" (i)
+	: "cc");
+}
+
 static inline int atomic_add_return(int i, atomic_t *v)
 {
 	unsigned long tmp;
 	int result;
 
+	smp_mb();
+
 	__asm__ __volatile__("@ atomic_add_return\n"
 "1:	ldrex	%0, [%2]\n"
 "	add	%0, %0, %3\n"
@@ -59,14 +77,34 @@ static inline int atomic_add_return(int i, atomic_t *v)
 	: "r" (&v->counter), "Ir" (i)
 	: "cc");
 
+	smp_mb();
+
 	return result;
 }
 
+static inline void atomic_sub(int i, atomic_t *v)
+{
+	unsigned long tmp;
+	int result;
+
+	__asm__ __volatile__("@ atomic_sub\n"
+"1:	ldrex	%0, [%2]\n"
+"	sub	%0, %0, %3\n"
+"	strex	%1, %0, [%2]\n"
+"	teq	%1, #0\n"
+"	bne	1b"
+	: "=&r" (result), "=&r" (tmp)
+	: "r" (&v->counter), "Ir" (i)
+	: "cc");
+}
+
 static inline int atomic_sub_return(int i, atomic_t *v)
 {
 	unsigned long tmp;
 	int result;
 
+	smp_mb();
+
 	__asm__ __volatile__("@ atomic_sub_return\n"
 "1:	ldrex	%0, [%2]\n"
 "	sub	%0, %0, %3\n"
@@ -77,6 +115,8 @@ static inline int atomic_sub_return(int i, atomic_t *v)
 	: "r" (&v->counter), "Ir" (i)
 	: "cc");
 
+	smp_mb();
+
 	return result;
 }
 
@@ -84,6 +124,8 @@ static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new)
 {
 	unsigned long oldval, res;
 
+	smp_mb();
+
 	do {
 		__asm__ __volatile__("@ atomic_cmpxchg\n"
 		"ldrex	%1, [%2]\n"
@@ -95,6 +137,8 @@ static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new)
 		    : "cc");
 	} while (res);
 
+	smp_mb();
+
 	return oldval;
 }
 
@@ -135,6 +179,7 @@ static inline int atomic_add_return(int i, atomic_t *v)
 
 	return val;
 }
+#define atomic_add(i, v)	(void) atomic_add_return(i, v)
 
 static inline int atomic_sub_return(int i, atomic_t *v)
 {
@@ -148,6 +193,7 @@ static inline int atomic_sub_return(int i, atomic_t *v)
 
 	return val;
 }
+#define atomic_sub(i, v)	(void) atomic_sub_return(i, v)
 
 static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
 {
@@ -187,10 +233,8 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
 }
 #define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
 
-#define atomic_add(i, v)	(void) atomic_add_return(i, v)
-#define atomic_inc(v)		(void) atomic_add_return(1, v)
-#define atomic_sub(i, v)	(void) atomic_sub_return(i, v)
-#define atomic_dec(v)		(void) atomic_sub_return(1, v)
+#define atomic_inc(v)		atomic_add(1, v)
+#define atomic_dec(v)		atomic_sub(1, v)
 
 #define atomic_inc_and_test(v)	(atomic_add_return(1, v) == 0)
 #define atomic_dec_and_test(v)	(atomic_sub_return(1, v) == 0)
@@ -200,11 +244,10 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
 
 #define atomic_add_negative(i,v) (atomic_add_return(i, v) < 0)
 
-/* Atomic operations are already serializing on ARM */
-#define smp_mb__before_atomic_dec()	barrier()
-#define smp_mb__after_atomic_dec()	barrier()
-#define smp_mb__before_atomic_inc()	barrier()
-#define smp_mb__after_atomic_inc()	barrier()
+#define smp_mb__before_atomic_dec()	smp_mb()
+#define smp_mb__after_atomic_dec()	smp_mb()
+#define smp_mb__before_atomic_inc()	smp_mb()
+#define smp_mb__after_atomic_inc()	smp_mb()
 
 #include <asm-generic/atomic.h>
 #endif

arch/arm/include/asm/cache.h

@@ -7,4 +7,20 @@
 #define L1_CACHE_SHIFT		5
 #define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
 
+/*
+ * Memory returned by kmalloc() may be used for DMA, so we must make
+ * sure that all such allocations are cache aligned. Otherwise,
+ * unrelated code may cause parts of the buffer to be read into the
+ * cache before the transfer is done, causing old data to be seen by
+ * the CPU.
+ */
+#define ARCH_KMALLOC_MINALIGN	L1_CACHE_BYTES
+
+/*
+ * With EABI on ARMv5 and above we must have 64-bit aligned slab pointers.
+ */
+#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5)
+#define ARCH_SLAB_MINALIGN 8
+#endif
+
 #endif

arch/arm/include/asm/flat.h

@@ -5,9 +5,6 @@
 #ifndef __ARM_FLAT_H__
 #define __ARM_FLAT_H__
 
-/* An odd number of words will be pushed after this alignment, so
-   deliberately misalign the value.  */
-#define	flat_stack_align(sp)	sp = (void *)(((unsigned long)(sp) - 4) | 4)
 #define	flat_argvp_envp_on_stack()		1
 #define	flat_old_ram_flag(flags)		(flags)
 #define	flat_reloc_valid(reloc, size)		((reloc) <= (size))

arch/arm/include/asm/page.h

@@ -202,13 +202,6 @@ typedef struct page *pgtable_t;
 	(((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0) | \
 	 VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
 
-/*
- * With EABI on ARMv5 and above we must have 64-bit aligned slab pointers.
- */
-#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5)
-#define ARCH_SLAB_MINALIGN 8
-#endif
-
 #include <asm-generic/page.h>
 
 #endif

arch/arm/include/asm/system.h

@@ -248,6 +248,8 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size
 	unsigned int tmp;
 #endif
 
+	smp_mb();
+
 	switch (size) {
 #if __LINUX_ARM_ARCH__ >= 6
 	case 1:
@@ -307,6 +309,7 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size
 		__bad_xchg(ptr, size), ret = 0;
 		break;
 	}
+	smp_mb();
 
 	return ret;
 }
@@ -316,6 +319,12 @@ extern void enable_hlt(void);
 
 #include <asm-generic/cmpxchg-local.h>
 
+#if __LINUX_ARM_ARCH__ < 6
+
+#ifdef CONFIG_SMP
+#error "SMP is not supported on this platform"
+#endif
+
 /*
  * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
  * them available.
@@ -329,6 +338,173 @@ extern void enable_hlt(void);
 #include <asm-generic/cmpxchg.h>
 #endif
 
+#else	/* __LINUX_ARM_ARCH__ >= 6 */
+
+extern void __bad_cmpxchg(volatile void *ptr, int size);
+
+/*
+ * cmpxchg only support 32-bits operands on ARMv6.
+ */
+
+static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
+				      unsigned long new, int size)
+{
+	unsigned long oldval, res;
+
+	switch (size) {
+#ifdef CONFIG_CPU_32v6K
+	case 1:
+		do {
+			asm volatile("@ __cmpxchg1\n"
+			"	ldrexb	%1, [%2]\n"
+			"	mov	%0, #0\n"
+			"	teq	%1, %3\n"
+			"	strexbeq %0, %4, [%2]\n"
+				: "=&r" (res), "=&r" (oldval)
+				: "r" (ptr), "Ir" (old), "r" (new)
+				: "memory", "cc");
+		} while (res);
+		break;
+	case 2:
+		do {
+			asm volatile("@ __cmpxchg1\n"
+			"	ldrexh	%1, [%2]\n"
+			"	mov	%0, #0\n"
+			"	teq	%1, %3\n"
+			"	strexheq %0, %4, [%2]\n"
+				: "=&r" (res), "=&r" (oldval)
+				: "r" (ptr), "Ir" (old), "r" (new)
+				: "memory", "cc");
+		} while (res);
+		break;
+#endif /* CONFIG_CPU_32v6K */
+	case 4:
+		do {
+			asm volatile("@ __cmpxchg4\n"
+			"	ldrex	%1, [%2]\n"
+			"	mov	%0, #0\n"
+			"	teq	%1, %3\n"
+			"	strexeq %0, %4, [%2]\n"
+				: "=&r" (res), "=&r" (oldval)
+				: "r" (ptr), "Ir" (old), "r" (new)
+				: "memory", "cc");
+		} while (res);
+		break;
+	default:
+		__bad_cmpxchg(ptr, size);
+		oldval = 0;
+	}
+
+	return oldval;
+}
+
+static inline unsigned long __cmpxchg_mb(volatile void *ptr, unsigned long old,
+					 unsigned long new, int size)
+{
+	unsigned long ret;
+
+	smp_mb();
+	ret = __cmpxchg(ptr, old, new, size);
+	smp_mb();
+
+	return ret;
+}
+
+#define cmpxchg(ptr,o,n)						\
+	((__typeof__(*(ptr)))__cmpxchg_mb((ptr),			\
+					  (unsigned long)(o),		\
+					  (unsigned long)(n),		\
+					  sizeof(*(ptr))))
+
+static inline unsigned long __cmpxchg_local(volatile void *ptr,
+					    unsigned long old,
+					    unsigned long new, int size)
+{
+	unsigned long ret;
+
+	switch (size) {
+#ifndef CONFIG_CPU_32v6K
+	case 1:
+	case 2:
+		ret = __cmpxchg_local_generic(ptr, old, new, size);
+		break;
+#endif	/* !CONFIG_CPU_32v6K */
+	default:
+		ret = __cmpxchg(ptr, old, new, size);
+	}
+
+	return ret;
+}
+
+#define cmpxchg_local(ptr,o,n)						\
+	((__typeof__(*(ptr)))__cmpxchg_local((ptr),			\
+				       (unsigned long)(o),		\
+				       (unsigned long)(n),		\
+				       sizeof(*(ptr))))
+
+#ifdef CONFIG_CPU_32v6K
+
+/*
+ * Note : ARMv7-M (currently unsupported by Linux) does not support
+ * ldrexd/strexd. If ARMv7-M is ever supported by the Linux kernel, it should
+ * not be allowed to use __cmpxchg64.
+ */
+static inline unsigned long long __cmpxchg64(volatile void *ptr,
+					     unsigned long long old,
+					     unsigned long long new)
+{
+	register unsigned long long oldval asm("r0");
+	register unsigned long long __old asm("r2") = old;
+	register unsigned long long __new asm("r4") = new;
+	unsigned long res;
+
+	do {
+		asm volatile(
+		"	@ __cmpxchg8\n"
+		"	ldrexd	%1, %H1, [%2]\n"
+		"	mov	%0, #0\n"
+		"	teq	%1, %3\n"
+		"	teqeq	%H1, %H3\n"
+		"	strexdeq %0, %4, %H4, [%2]\n"
+			: "=&r" (res), "=&r" (oldval)
+			: "r" (ptr), "Ir" (__old), "r" (__new)
+			: "memory", "cc");
+	} while (res);
+
+	return oldval;
+}
+
+static inline unsigned long long __cmpxchg64_mb(volatile void *ptr,
+						unsigned long long old,
+						unsigned long long new)
+{
+	unsigned long long ret;
+
+	smp_mb();
+	ret = __cmpxchg64(ptr, old, new);
+	smp_mb();
+
+	return ret;
+}
+
+#define cmpxchg64(ptr,o,n)						\
+	((__typeof__(*(ptr)))__cmpxchg64_mb((ptr),			\
+					    (unsigned long long)(o),	\
+					    (unsigned long long)(n)))
+
+#define cmpxchg64_local(ptr,o,n)					\
+	((__typeof__(*(ptr)))__cmpxchg64((ptr),				\
+					 (unsigned long long)(o),	\
+					 (unsigned long long)(n)))
+
+#else	/* !CONFIG_CPU_32v6K */
+
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+
+#endif	/* CONFIG_CPU_32v6K */
+
+#endif	/* __LINUX_ARM_ARCH__ >= 6 */
+
 #endif /* __ASSEMBLY__ */
 
 #define arch_align_stack(x) (x)

arch/arm/kernel/elf.c

@@ -78,6 +78,15 @@ int arm_elf_read_implies_exec(const struct elf32_hdr *x, int executable_stack)
 		return 1;
 	if (cpu_architecture() < CPU_ARCH_ARMv6)
 		return 1;
+#if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT)
+	/*
+	 * If we have support for OABI programs, we can never allow NX
+	 * support - our signal syscall restart mechanism relies upon
+	 * being able to execute code placed on the user stack.
+	 */
+	return 1;
+#else
 	return 0;
+#endif
 }
 EXPORT_SYMBOL(arm_elf_read_implies_exec);

arch/arm/kernel/entry-armv.S

@@ -815,10 +815,7 @@ __kuser_helper_start:
  */
 
 __kuser_memory_barrier:				@ 0xffff0fa0
-
-#if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_SMP)
-	mcr	p15, 0, r0, c7, c10, 5	@ dmb
-#endif
+	smp_dmb
 	usr_ret	lr
 
 	.align	5

arch/arm/lib/bitops.h

@@ -18,12 +18,14 @@
 	mov	r2, #1
 	add	r1, r1, r0, lsr #3	@ Get byte offset
 	mov	r3, r2, lsl r3		@ create mask
+	smp_dmb
 1:	ldrexb	r2, [r1]
 	ands	r0, r2, r3		@ save old value of bit
 	\instr	r2, r2, r3			@ toggle bit
 	strexb	ip, r2, [r1]
 	cmp	ip, #0
 	bne	1b
+	smp_dmb
 	cmp	r0, #0
 	movne	r0, #1
 2:	mov	pc, lr

arch/arm/mach-gemini/include/mach/hardware.h

@@ -15,10 +15,9 @@
 /*
  * Memory Map definitions
  */
-/* FIXME: Does it really swap SRAM like this? */
 #ifdef CONFIG_GEMINI_MEM_SWAP
 # define GEMINI_DRAM_BASE	0x00000000
-# define GEMINI_SRAM_BASE	0x20000000
+# define GEMINI_SRAM_BASE	0x70000000
 #else
 # define GEMINI_SRAM_BASE	0x00000000
 # define GEMINI_DRAM_BASE	0x10000000

arch/arm/mach-kirkwood/common.c

@@ -144,6 +144,9 @@ static struct platform_device kirkwood_ge00 = {
 	.id		= 0,
 	.num_resources	= 1,
 	.resource	= kirkwood_ge00_resources,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
 };
 
 void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
@@ -202,6 +205,9 @@ static struct platform_device kirkwood_ge01 = {
 	.id		= 1,
 	.num_resources	= 1,
 	.resource	= kirkwood_ge01_resources,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
 };
 
 void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
@@ -386,12 +392,10 @@ static struct mv64xxx_i2c_pdata kirkwood_i2c_pdata = {
 
 static struct resource kirkwood_i2c_resources[] = {
 	{
-		.name	= "i2c",
 		.start	= I2C_PHYS_BASE,
 		.end	= I2C_PHYS_BASE + 0x1f,
 		.flags	= IORESOURCE_MEM,
 	}, {
-		.name	= "i2c",
 		.start	= IRQ_KIRKWOOD_TWSI,
 		.end	= IRQ_KIRKWOOD_TWSI,
 		.flags	= IORESOURCE_IRQ,

arch/arm/mach-kirkwood/ts219-setup.c

@@ -142,6 +142,8 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = {
 	MPP1_SPI_MOSI,
 	MPP2_SPI_SCK,
 	MPP3_SPI_MISO,
+	MPP4_SATA1_ACTn,
+	MPP5_SATA0_ACTn,
 	MPP8_TW_SDA,
 	MPP9_TW_SCK,
 	MPP10_UART0_TXD,
@@ -150,10 +152,6 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = {
 	MPP14_UART1_RXD,	/* PIC controller */
 	MPP15_GPIO,		/* USB Copy button */
 	MPP16_GPIO,		/* Reset button */
-	MPP20_SATA1_ACTn,
-	MPP21_SATA0_ACTn,
-	MPP22_SATA1_PRESENTn,
-	MPP23_SATA0_PRESENTn,
 	0
 };
 

arch/arm/mach-loki/common.c

@@ -82,6 +82,9 @@ static struct platform_device loki_ge0 = {
 	.id		= 0,
 	.num_resources	= 1,
 	.resource	= loki_ge0_resources,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
 };
 
 void __init loki_ge0_init(struct mv643xx_eth_platform_data *eth_data)
@@ -136,6 +139,9 @@ static struct platform_device loki_ge1 = {
 	.id		= 1,
 	.num_resources	= 1,
 	.resource	= loki_ge1_resources,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
 };
 
 void __init loki_ge1_init(struct mv643xx_eth_platform_data *eth_data)

arch/arm/mach-mmp/include/mach/mfp-pxa168.h

@@ -3,6 +3,11 @@
 
 #include <mach/mfp.h>
 
+#define MFP_DRIVE_VERY_SLOW	(0x0 << 13)
+#define MFP_DRIVE_SLOW		(0x1 << 13)
+#define MFP_DRIVE_MEDIUM	(0x2 << 13)
+#define MFP_DRIVE_FAST		(0x3 << 13)
+
 /* GPIO */
 #define GPIO0_GPIO		MFP_CFG(GPIO0, AF5)
 #define GPIO1_GPIO		MFP_CFG(GPIO1, AF5)

arch/arm/mach-mmp/include/mach/mfp-pxa910.h

@@ -3,6 +3,11 @@
 
 #include <mach/mfp.h>
 
+#define MFP_DRIVE_VERY_SLOW	(0x0 << 13)
+#define MFP_DRIVE_SLOW		(0x2 << 13)
+#define MFP_DRIVE_MEDIUM	(0x4 << 13)
+#define MFP_DRIVE_FAST		(0x8 << 13)
+
 /* UART2 */
 #define GPIO47_UART2_RXD	MFP_CFG(GPIO47, AF6)
 #define GPIO48_UART2_TXD	MFP_CFG(GPIO48, AF6)

arch/arm/mach-mmp/include/mach/mfp.h

@@ -12,16 +12,13 @@
  * possible, we make the following compromise:
  *
  * 1. SLEEP_OE_N will always be programmed to '1' (by MFP_LPM_FLOAT)
- * 2. DRIVE strength definitions redefined to include the reserved bit10
+ * 2. DRIVE strength definitions redefined to include the reserved bit
+ *    - the reserved bit differs between pxa168 and pxa910, and the
+ *      MFP_DRIVE_* macros are individually defined in mfp-pxa{168,910}.h
  * 3. Override MFP_CFG() and MFP_CFG_DRV()
  * 4. Drop the use of MFP_CFG_LPM() and MFP_CFG_X()
  */
 
-#define MFP_DRIVE_VERY_SLOW	(0x0 << 13)
-#define MFP_DRIVE_SLOW		(0x2 << 13)
-#define MFP_DRIVE_MEDIUM	(0x4 << 13)
-#define MFP_DRIVE_FAST		(0x8 << 13)
-
 #undef MFP_CFG
 #undef MFP_CFG_DRV
 #undef MFP_CFG_LPM

arch/arm/mach-mmp/time.c

@@ -136,7 +136,7 @@ static struct clock_event_device ckevt = {
 	.set_mode	= timer_set_mode,
 };
 
-static cycle_t clksrc_read(void)
+static cycle_t clksrc_read(struct clocksource *cs)
 {
 	return timer_read();
 }

arch/arm/mach-mv78xx0/common.c

@@ -321,6 +321,9 @@ static struct platform_device mv78xx0_ge00 = {
 	.id		= 0,
 	.num_resources	= 1,
 	.resource	= mv78xx0_ge00_resources,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
 };
 
 void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data)
@@ -375,6 +378,9 @@ static struct platform_device mv78xx0_ge01 = {
 	.id		= 1,
 	.num_resources	= 1,
 	.resource	= mv78xx0_ge01_resources,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
 };
 
 void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data)
@@ -429,6 +435,9 @@ static struct platform_device mv78xx0_ge10 = {
 	.id		= 2,
 	.num_resources	= 1,
 	.resource	= mv78xx0_ge10_resources,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
 };
 
 void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data)
@@ -496,6 +505,9 @@ static struct platform_device mv78xx0_ge11 = {
 	.id		= 3,
 	.num_resources	= 1,
 	.resource	= mv78xx0_ge11_resources,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
 };
 
 void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data)
@@ -532,12 +544,10 @@ static struct mv64xxx_i2c_pdata mv78xx0_i2c_0_pdata = {
 
 static struct resource mv78xx0_i2c_0_resources[] = {
 	{
-		.name   = "i2c 0 base",
 		.start  = I2C_0_PHYS_BASE,
 		.end    = I2C_0_PHYS_BASE + 0x1f,
 		.flags  = IORESOURCE_MEM,
 	}, {
-		.name   = "i2c 0 irq",
 		.start  = IRQ_MV78XX0_I2C_0,
 		.end    = IRQ_MV78XX0_I2C_0,
 		.flags  = IORESOURCE_IRQ,
@@ -567,12 +577,10 @@ static struct mv64xxx_i2c_pdata mv78xx0_i2c_1_pdata = {
 
 static struct resource mv78xx0_i2c_1_resources[] = {
 	{
-		.name   = "i2c 1 base",
 		.start  = I2C_1_PHYS_BASE,
 		.end    = I2C_1_PHYS_BASE + 0x1f,
 		.flags  = IORESOURCE_MEM,
 	}, {
-		.name   = "i2c 1 irq",
 		.start  = IRQ_MV78XX0_I2C_1,
 		.end    = IRQ_MV78XX0_I2C_1,
 		.flags  = IORESOURCE_IRQ,

arch/arm/mach-mx2/clock_imx21.c

@@ -890,7 +890,7 @@ static struct clk clko_clk = {
 		.con_id = n, \
 		.clk = &c, \
 	},
-static struct clk_lookup lookups[] __initdata = {
+static struct clk_lookup lookups[] = {
 /* It's unlikely that any driver wants one of them directly:
 	_REGISTER_CLOCK(NULL, "ckih", ckih_clk)
 	_REGISTER_CLOCK(NULL, "ckil", ckil_clk)

arch/arm/mach-mx2/clock_imx27.c

@@ -621,7 +621,7 @@ DEFINE_CLOCK1(csi_clk,     0, 0,      0, parent, &csi_clk1, &per4_clk);
 		.clk = &c, \
 	},
 
-static struct clk_lookup lookups[] __initdata = {
+static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
 	_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
 	_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)

arch/arm/mach-mx3/clock-imx35.c

@@ -404,7 +404,7 @@ DEFINE_CLOCK(gpu2d_clk,  0, CCM_CGR3,  4, NULL, NULL);
 		.clk = &c,		\
 	},
 
-static struct clk_lookup lookups[] __initdata = {
+static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "asrc", asrc_clk)
 	_REGISTER_CLOCK(NULL, "ata", ata_clk)
 	_REGISTER_CLOCK(NULL, "audmux", audmux_clk)

arch/arm/mach-mx3/clock.c

@@ -516,7 +516,7 @@ DEFINE_CLOCK(ipg_clk,     0, NULL,          0, ipg_get_rate, NULL, &ahb_clk);
 		.clk = &c, \
 	},
 
-static struct clk_lookup lookups[] __initdata = {
+static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "emi", emi_clk)
 	_REGISTER_CLOCK(NULL, "cspi", cspi1_clk)
 	_REGISTER_CLOCK(NULL, "cspi", cspi2_clk)

arch/arm/mach-orion5x/common.c

@@ -188,6 +188,9 @@ static struct platform_device orion5x_eth = {
 	.id		= 0,
 	.num_resources	= 1,
 	.resource	= orion5x_eth_resources,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
 };
 
 void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
@@ -248,12 +251,10 @@ static struct mv64xxx_i2c_pdata orion5x_i2c_pdata = {
 
 static struct resource orion5x_i2c_resources[] = {
 	{
-		.name	= "i2c base",
 		.start	= I2C_PHYS_BASE,
 		.end	= I2C_PHYS_BASE + 0x1f,
 		.flags	= IORESOURCE_MEM,
 	}, {
-		.name	= "i2c irq",
 		.start	= IRQ_ORION5X_I2C,
 		.end	= IRQ_ORION5X_I2C,
 		.flags	= IORESOURCE_IRQ,

arch/arm/mach-pxa/devices.c

@@ -72,7 +72,10 @@ void __init pxa_set_mci_info(struct pxamci_platform_data *info)
 }
 
 
-static struct pxa2xx_udc_mach_info pxa_udc_info;
+static struct pxa2xx_udc_mach_info pxa_udc_info = {
+	.gpio_pullup = -1,
+	.gpio_vbus   = -1,
+};
 
 void __init pxa_set_udc_info(struct pxa2xx_udc_mach_info *info)
 {

arch/arm/mach-pxa/ezx.c

@@ -111,9 +111,9 @@ static unsigned long ezx_pin_config[] __initdata = {
 	GPIO25_SSP1_TXD,
 	GPIO26_SSP1_RXD,
 	GPIO24_GPIO,				/* pcap chip select */
-	GPIO1_GPIO,				/* pcap interrupt */
-	GPIO4_GPIO,				/* WDI_AP */
-	GPIO55_GPIO,				/* SYS_RESTART */
+	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,	/* pcap interrupt */
+	GPIO4_GPIO | MFP_LPM_DRIVE_HIGH,	/* WDI_AP */
+	GPIO55_GPIO | MFP_LPM_DRIVE_HIGH,	/* SYS_RESTART */
 
 	/* MMC */
 	GPIO32_MMC_CLK,
@@ -144,20 +144,20 @@ static unsigned long ezx_pin_config[] __initdata = {
 #if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_E680)
 static unsigned long gen1_pin_config[] __initdata = {
 	/* flip / lockswitch */
-	GPIO12_GPIO,
+	GPIO12_GPIO | WAKEUP_ON_EDGE_BOTH,
 
 	/* bluetooth (bcm2035) */
-	GPIO14_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* HOSTWAKE */
+	GPIO14_GPIO | WAKEUP_ON_EDGE_RISE,	/* HOSTWAKE */
 	GPIO48_GPIO,				/* RESET */
 	GPIO28_GPIO,				/* WAKEUP */
 
 	/* Neptune handshake */
-	GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* BP_RDY */
-	GPIO57_GPIO,				/* AP_RDY */
-	GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* WDI */
-	GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* WDI2 */
-	GPIO82_GPIO,				/* RESET */
-	GPIO99_GPIO,				/* TC_MM_EN */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_FALL,	/* BP_RDY */
+	GPIO57_GPIO | MFP_LPM_DRIVE_HIGH,	/* AP_RDY */
+	GPIO13_GPIO | WAKEUP_ON_EDGE_BOTH,	/* WDI */
+	GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH,	/* WDI2 */
+	GPIO82_GPIO | MFP_LPM_DRIVE_HIGH,	/* RESET */
+	GPIO99_GPIO | MFP_LPM_DRIVE_HIGH,	/* TC_MM_EN */
 
 	/* sound */
 	GPIO52_SSP3_SCLK,
@@ -199,21 +199,21 @@ static unsigned long gen1_pin_config[] __initdata = {
 	defined(CONFIG_MACH_EZX_E2) || defined(CONFIG_MACH_EZX_E6)
 static unsigned long gen2_pin_config[] __initdata = {
 	/* flip / lockswitch */
-	GPIO15_GPIO,
+	GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH,
 
 	/* EOC */
-	GPIO10_GPIO,
+	GPIO10_GPIO | WAKEUP_ON_EDGE_RISE,
 
 	/* bluetooth (bcm2045) */
-	GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* HOSTWAKE */
+	GPIO13_GPIO | WAKEUP_ON_EDGE_RISE,	/* HOSTWAKE */
 	GPIO37_GPIO,				/* RESET */
 	GPIO57_GPIO,				/* WAKEUP */
 
 	/* Neptune handshake */
-	GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* BP_RDY */
-	GPIO96_GPIO,				/* AP_RDY */
-	GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* WDI */
-	GPIO116_GPIO,				/* RESET */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_FALL,	/* BP_RDY */
+	GPIO96_GPIO | MFP_LPM_DRIVE_HIGH,	/* AP_RDY */
+	GPIO3_GPIO | WAKEUP_ON_EDGE_FALL,	/* WDI */
+	GPIO116_GPIO | MFP_LPM_DRIVE_HIGH,	/* RESET */
 	GPIO41_GPIO,				/* BP_FLASH */
 
 	/* sound */

arch/arm/mach-pxa/imote2.c

@@ -412,7 +412,7 @@ static struct platform_device imote2_flash_device = {
  */
 static struct i2c_board_info __initdata imote2_i2c_board_info[] = {
 	{ /* UCAM sensor board */
-		.type = "max1238",
+		.type = "max1239",
 		.addr = 0x35,
 	}, { /* ITS400 Sensor board only */
 		.type = "max1363",

arch/arm/mach-pxa/include/mach/reset.h

@@ -13,8 +13,9 @@ extern void clear_reset_status(unsigned int mask);
 /**
  * init_gpio_reset() - register GPIO as reset generator
  * @gpio: gpio nr
- * @output: set gpio as out/low instead of input during normal work
+ * @output: set gpio as output instead of input during normal work
+ * @level: output level
  */
-extern int init_gpio_reset(int gpio, int output);
+extern int init_gpio_reset(int gpio, int output, int level);
 
 #endif /* __ASM_ARCH_RESET_H */

arch/arm/mach-pxa/mfp-pxa2xx.c

@@ -322,6 +322,7 @@ static inline void pxa27x_mfp_init(void) {}
 #ifdef CONFIG_PM
 static unsigned long saved_gafr[2][4];
 static unsigned long saved_gpdr[4];
+static unsigned long saved_pgsr[4];
 
 static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state)
 {
@@ -332,6 +333,7 @@ static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state)
 		saved_gafr[0][i] = GAFR_L(i);
 		saved_gafr[1][i] = GAFR_U(i);
 		saved_gpdr[i] = GPDR(i * 32);
+		saved_pgsr[i] = PGSR(i);
 
 		GPDR(i * 32) = gpdr_lpm[i];
 	}
@@ -346,6 +348,7 @@ static int pxa2xx_mfp_resume(struct sys_device *d)
 		GAFR_L(i) = saved_gafr[0][i];
 		GAFR_U(i) = saved_gafr[1][i];
 		GPDR(i * 32) = saved_gpdr[i];
+		PGSR(i) = saved_pgsr[i];
 	}
 	PSSR = PSSR_RDH | PSSR_PH;
 	return 0;
@@ -374,6 +377,9 @@ static int __init pxa2xx_mfp_init(void)
 	if (cpu_is_pxa27x())
 		pxa27x_mfp_init();
 
+	/* clear RDH bit to enable GPIO receivers after reset/sleep exit */
+	PSSR = PSSR_RDH;
+
 	/* initialize gafr_run[], pgsr_lpm[] from existing values */
 	for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++)
 		gpdr_lpm[i] = GPDR(i * 32);

arch/arm/mach-pxa/palmld.c

@@ -62,6 +62,8 @@ static unsigned long palmld_pin_config[] __initdata = {
 	GPIO29_AC97_SDATA_IN_0,
 	GPIO30_AC97_SDATA_OUT,
 	GPIO31_AC97_SYNC,
+	GPIO89_AC97_SYSCLK,
+	GPIO95_AC97_nRESET,
 
 	/* IrDA */
 	GPIO108_GPIO,	/* ir disable */

arch/arm/mach-pxa/palmt5.c

@@ -64,6 +64,7 @@ static unsigned long palmt5_pin_config[] __initdata = {
 	GPIO29_AC97_SDATA_IN_0,
 	GPIO30_AC97_SDATA_OUT,
 	GPIO31_AC97_SYNC,
+	GPIO89_AC97_SYSCLK,
 	GPIO95_AC97_nRESET,
 
 	/* IrDA */

arch/arm/mach-pxa/palmtx.c

@@ -65,6 +65,7 @@ static unsigned long palmtx_pin_config[] __initdata = {
 	GPIO29_AC97_SDATA_IN_0,
 	GPIO30_AC97_SDATA_OUT,
 	GPIO31_AC97_SYNC,
+	GPIO89_AC97_SYSCLK,
 	GPIO95_AC97_nRESET,
 
 	/* IrDA */

arch/arm/mach-pxa/reset.c

@@ -20,7 +20,7 @@ static void do_hw_reset(void);
 
 static int reset_gpio = -1;
 
-int init_gpio_reset(int gpio, int output)
+int init_gpio_reset(int gpio, int output, int level)
 {
 	int rc;
 
@@ -31,7 +31,7 @@ int init_gpio_reset(int gpio, int output)
 	}
 
 	if (output)
-		rc = gpio_direction_output(gpio, 0);
+		rc = gpio_direction_output(gpio, level);
 	else
 		rc = gpio_direction_input(gpio);
 	if (rc) {

arch/arm/mach-pxa/spitz.c

@@ -531,9 +531,15 @@ static int spitz_ohci_init(struct device *dev)
 	return gpio_direction_output(SPITZ_GPIO_USB_HOST, 1);
 }
 
+static void spitz_ohci_exit(struct device *dev)
+{
+	gpio_free(SPITZ_GPIO_USB_HOST);
+}
+
 static struct pxaohci_platform_data spitz_ohci_platform_data = {
 	.port_mode	= PMM_NPS_MODE,
 	.init		= spitz_ohci_init,
+	.exit		= spitz_ohci_exit,
 	.flags		= ENABLE_PORT_ALL | NO_OC_PROTECTION,
 	.power_budget	= 150,
 };
@@ -731,7 +737,7 @@ static void spitz_restart(char mode, const char *cmd)
 
 static void __init common_init(void)
 {
-	init_gpio_reset(SPITZ_GPIO_ON_RESET, 1);
+	init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0);
 	pm_power_off = spitz_poweroff;
 	arm_pm_restart = spitz_restart;
 

arch/arm/mach-pxa/tosa.c

@@ -897,7 +897,7 @@ static void __init tosa_init(void)
 	gpio_set_wake(MFP_PIN_GPIO1, 1);
 	/* We can't pass to gpio-keys since it will drop the Reset altfunc */
 
-	init_gpio_reset(TOSA_GPIO_ON_RESET, 0);
+	init_gpio_reset(TOSA_GPIO_ON_RESET, 0, 0);
 
 	pm_power_off = tosa_poweroff;
 	arm_pm_restart = tosa_restart;

arch/arm/mm/proc-v7.S

@@ -184,23 +184,37 @@ __v7_setup:
 	stmia	r12, {r0-r5, r7, r9, r11, lr}
 	bl	v7_flush_dcache_all
 	ldmia	r12, {r0-r5, r7, r9, r11, lr}
+
+	mrc	p15, 0, r0, c0, c0, 0		@ read main ID register
+	and	r10, r0, #0xff000000		@ ARM?
+	teq	r10, #0x41000000
+	bne	2f
+	and	r5, r0, #0x00f00000		@ variant
+	and	r6, r0, #0x0000000f		@ revision
+	orr	r0, r6, r5, lsr #20-4		@ combine variant and revision
+
 #ifdef CONFIG_ARM_ERRATA_430973
-	mrc	p15, 0, r10, c1, c0, 1		@ read aux control register
-	orr	r10, r10, #(1 << 6)		@ set IBE to 1
-	mcr	p15, 0, r10, c1, c0, 1		@ write aux control register
+	teq	r5, #0x00100000			@ only present in r1p*
+	mrceq	p15, 0, r10, c1, c0, 1		@ read aux control register
+	orreq	r10, r10, #(1 << 6)		@ set IBE to 1
+	mcreq	p15, 0, r10, c1, c0, 1		@ write aux control register
 #endif
 #ifdef CONFIG_ARM_ERRATA_458693
-	mrc	p15, 0, r10, c1, c0, 1		@ read aux control register
-	orr	r10, r10, #(1 << 5)		@ set L1NEON to 1
-	orr	r10, r10, #(1 << 9)		@ set PLDNOP to 1
-	mcr	p15, 0, r10, c1, c0, 1		@ write aux control register
+	teq	r0, #0x20			@ only present in r2p0
+	mrceq	p15, 0, r10, c1, c0, 1		@ read aux control register
+	orreq	r10, r10, #(1 << 5)		@ set L1NEON to 1
+	orreq	r10, r10, #(1 << 9)		@ set PLDNOP to 1
+	mcreq	p15, 0, r10, c1, c0, 1		@ write aux control register
 #endif
 #ifdef CONFIG_ARM_ERRATA_460075
-	mrc	p15, 1, r10, c9, c0, 2		@ read L2 cache aux ctrl register
-	orr	r10, r10, #(1 << 22)		@ set the Write Allocate disable bit
-	mcr	p15, 1, r10, c9, c0, 2		@ write the L2 cache aux ctrl register
+	teq	r0, #0x20			@ only present in r2p0
+	mrceq	p15, 1, r10, c9, c0, 2		@ read L2 cache aux ctrl register
+	tsteq	r10, #1 << 22
+	orreq	r10, r10, #(1 << 22)		@ set the Write Allocate disable bit
+	mcreq	p15, 1, r10, c9, c0, 2		@ write the L2 cache aux ctrl register
 #endif
-	mov	r10, #0
+
+2:	mov	r10, #0
 #ifdef HARVARD_CACHE
 	mcr	p15, 0, r10, c7, c5, 0		@ I+BTB cache invalidate
 #endif

arch/arm/tools/mach-types

@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Mon Mar 23 20:09:01 2009
+# Last update: Fri May 29 10:14:20 2009
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -916,7 +916,7 @@ nxdb500			MACH_NXDB500		NXDB500			905
 apf9328			MACH_APF9328		APF9328			906
 omap_wipoq		MACH_OMAP_WIPOQ		OMAP_WIPOQ		907
 omap_twip		MACH_OMAP_TWIP		OMAP_TWIP		908
-palmt650		MACH_PALMT650		PALMT650		909
+treo650			MACH_TREO650		TREO650			909
 acumen			MACH_ACUMEN		ACUMEN			910
 xp100			MACH_XP100		XP100			911
 fs2410			MACH_FS2410		FS2410			912
@@ -1232,7 +1232,7 @@ ql202b			MACH_QL202B		QL202B			1226
 vpac270			MACH_VPAC270		VPAC270			1227
 rd129			MACH_RD129		RD129			1228
 htcwizard		MACH_HTCWIZARD		HTCWIZARD		1229
-xscale_treo680		MACH_XSCALE_TREO680	XSCALE_TREO680		1230
+treo680			MACH_TREO680		TREO680			1230
 tecon_tmezon		MACH_TECON_TMEZON	TECON_TMEZON		1231
 zylonite		MACH_ZYLONITE		ZYLONITE		1233
 gene1270		MACH_GENE1270		GENE1270		1234
@@ -1418,10 +1418,10 @@ looxc550		MACH_LOOXC550		LOOXC550		1417
 cnty_titan		MACH_CNTY_TITAN		CNTY_TITAN		1418
 app3xx			MACH_APP3XX		APP3XX			1419
 sideoatsgrama		MACH_SIDEOATSGRAMA	SIDEOATSGRAMA		1420
-palmtreo700p		MACH_PALMTREO700P	PALMTREO700P		1421
-palmtreo700w		MACH_PALMTREO700W	PALMTREO700W		1422
-palmtreo750		MACH_PALMTREO750	PALMTREO750		1423
-palmtreo755p		MACH_PALMTREO755P	PALMTREO755P		1424
+treo700p		MACH_TREO700P		TREO700P		1421
+treo700w		MACH_TREO700W		TREO700W		1422
+treo750			MACH_TREO750		TREO750			1423
+treo755p		MACH_TREO755P		TREO755P		1424
 ezreganut9200		MACH_EZREGANUT9200	EZREGANUT9200		1425
 sarge			MACH_SARGE		SARGE			1426
 a696			MACH_A696		A696			1427
@@ -1721,7 +1721,7 @@ sapphire		MACH_SAPPHIRE		SAPPHIRE		1729
 csb637xo		MACH_CSB637XO		CSB637XO		1730
 evisiong		MACH_EVISIONG		EVISIONG		1731
 stmp37xx		MACH_STMP37XX		STMP37XX		1732
-stmp378x		MACH_STMP38XX		STMP38XX		1733
+stmp378x		MACH_STMP378X		STMP378X		1733
 tnt			MACH_TNT		TNT			1734
 tbxt			MACH_TBXT		TBXT			1735
 playmate		MACH_PLAYMATE		PLAYMATE		1736
@@ -1817,7 +1817,7 @@ smdkc100		MACH_SMDKC100		SMDKC100		1826
 tavorevb		MACH_TAVOREVB		TAVOREVB		1827
 saar			MACH_SAAR		SAAR			1828
 deister_eyecam		MACH_DEISTER_EYECAM	DEISTER_EYECAM		1829
-at91sam9m10ek		MACH_AT91SAM9M10EK	AT91SAM9M10EK		1830
+at91sam9m10g45ek	MACH_AT91SAM9M10G45EK	AT91SAM9M10G45EK	1830
 linkstation_produo	MACH_LINKSTATION_PRODUO	LINKSTATION_PRODUO	1831
 hit_b0			MACH_HIT_B0		HIT_B0			1832
 adx_rmu			MACH_ADX_RMU		ADX_RMU			1833
@@ -2132,3 +2132,116 @@ apollo			MACH_APOLLO		APOLLO			2141
 at91cap9stk		MACH_AT91CAP9STK	AT91CAP9STK		2142
 spc300			MACH_SPC300		SPC300			2143
 eko			MACH_EKO		EKO			2144
+ccw9m2443		MACH_CCW9M2443		CCW9M2443		2145
+ccw9m2443js		MACH_CCW9M2443JS	CCW9M2443JS		2146
+m2m_router_device	MACH_M2M_ROUTER_DEVICE	M2M_ROUTER_DEVICE	2147
+str9104nas		MACH_STAR9104NAS	STAR9104NAS		2148
+pca100			MACH_PCA100		PCA100			2149
+z3_dm365_mod_01		MACH_Z3_DM365_MOD_01	Z3_DM365_MOD_01		2150
+hipox			MACH_HIPOX		HIPOX			2151
+omap3_piteds		MACH_OMAP3_PITEDS	OMAP3_PITEDS		2152
+bm150r			MACH_BM150R		BM150R			2153
+tbone			MACH_TBONE		TBONE			2154
+merlin			MACH_MERLIN		MERLIN			2155
+falcon			MACH_FALCON		FALCON			2156
+davinci_da850_evm	MACH_DAVINCI_DA850_EVM	DAVINCI_DA850_EVM	2157
+s5p6440			MACH_S5P6440		S5P6440			2158
+at91sam9g10ek		MACH_AT91SAM9G10EK	AT91SAM9G10EK		2159
+omap_4430sdp		MACH_OMAP_4430SDP	OMAP_4430SDP		2160
+lpc313x			MACH_LPC313X		LPC313X			2161
+magx_zn5		MACH_MAGX_ZN5		MAGX_ZN5		2162
+magx_em30		MACH_MAGX_EM30		MAGX_EM30		2163
+magx_ve66		MACH_MAGX_VE66		MAGX_VE66		2164
+meesc			MACH_MEESC		MEESC			2165
+otc570			MACH_OTC570		OTC570			2166
+bcu2412			MACH_BCU2412		BCU2412			2167
+beacon			MACH_BEACON		BEACON			2168
+actia_tgw		MACH_ACTIA_TGW		ACTIA_TGW		2169
+e4430			MACH_E4430		E4430			2170
+ql300			MACH_QL300		QL300			2171
+btmavb101		MACH_BTMAVB101		BTMAVB101		2172
+btmawb101		MACH_BTMAWB101		BTMAWB101		2173
+sq201			MACH_SQ201		SQ201			2174
+quatro45xx		MACH_QUATRO45XX		QUATRO45XX		2175
+openpad			MACH_OPENPAD		OPENPAD			2176
+tx25			MACH_TX25		TX25			2177
+omap3_torpedo		MACH_OMAP3_TORPEDO	OMAP3_TORPEDO		2178
+htcraphael_k		MACH_HTCRAPHAEL_K	HTCRAPHAEL_K		2179
+lal43			MACH_LAL43		LAL43			2181
+htcraphael_cdma500	MACH_HTCRAPHAEL_CDMA500	HTCRAPHAEL_CDMA500	2182
+anw6410			MACH_ANW6410		ANW6410			2183
+htcprophet		MACH_HTCPROPHET		HTCPROPHET		2185
+cfa_10022		MACH_CFA_10022		CFA_10022		2186
+imx27_visstrim_m10	MACH_IMX27_VISSTRIM_M10	IMX27_VISSTRIM_M10	2187
+px2imx27		MACH_PX2IMX27		PX2IMX27		2188
+stm3210e_eval		MACH_STM3210E_EVAL	STM3210E_EVAL		2189
+dvs10			MACH_DVS10		DVS10			2190
+portuxg20		MACH_PORTUXG20		PORTUXG20		2191
+arm_spv			MACH_ARM_SPV		ARM_SPV			2192
+smdkc110		MACH_SMDKC110		SMDKC110		2193
+cabespresso		MACH_CABESPRESSO	CABESPRESSO		2194
+hmc800			MACH_HMC800		HMC800			2195
+sholes			MACH_SHOLES		SHOLES			2196
+btmxc31			MACH_BTMXC31		BTMXC31			2197
+dt501			MACH_DT501		DT501			2198
+ktx			MACH_KTX		KTX			2199
+omap3517evm		MACH_OMAP3517EVM	OMAP3517EVM		2200
+netspace_v2		MACH_NETSPACE_V2	NETSPACE_V2		2201
+netspace_max_v2		MACH_NETSPACE_MAX_V2	NETSPACE_MAX_V2		2202
+d2net_v2		MACH_D2NET_V2		D2NET_V2		2203
+net2big_v2		MACH_NET2BIG_V2		NET2BIG_V2		2204
+net4big_v2		MACH_NET4BIG_V2		NET4BIG_V2		2205
+net5big_v2		MACH_NET5BIG_V2		NET5BIG_V2		2206
+endb2443		MACH_ENDB2443		ENDB2443		2207
+inetspace_v2		MACH_INETSPACE_V2	INETSPACE_V2		2208
+tros			MACH_TROS		TROS			2209
+pelco_homer		MACH_PELCO_HOMER	PELCO_HOMER		2210
+ofsp8			MACH_OFSP8		OFSP8			2211
+at91sam9g45ekes		MACH_AT91SAM9G45EKES	AT91SAM9G45EKES		2212
+guf_cupid		MACH_GUF_CUPID		GUF_CUPID		2213
+eab1r			MACH_EAB1R		EAB1R			2214
+desirec			MACH_DESIREC		DESIREC			2215
+cordoba			MACH_CORDOBA		CORDOBA			2216
+irvine			MACH_IRVINE		IRVINE			2217
+sff772			MACH_SFF772		SFF772			2218
+pelco_milano		MACH_PELCO_MILANO	PELCO_MILANO		2219
+pc7302			MACH_PC7302		PC7302			2220
+bip6000			MACH_BIP6000		BIP6000			2221
+silvermoon		MACH_SILVERMOON		SILVERMOON		2222
+vc0830			MACH_VC0830		VC0830			2223
+dt430			MACH_DT430		DT430			2224
+ji42pf			MACH_JI42PF		JI42PF			2225
+gnet_ksm		MACH_GNET_KSM		GNET_KSM		2226
+gnet_sgm		MACH_GNET_SGM		GNET_SGM		2227
+gnet_sgr		MACH_GNET_SGR		GNET_SGR		2228
+omap3_icetekevm		MACH_OMAP3_ICETEKEVM	OMAP3_ICETEKEVM		2229
+pnp			MACH_PNP		PNP			2230
+ctera_2bay_k		MACH_CTERA_2BAY_K	CTERA_2BAY_K		2231
+ctera_2bay_u		MACH_CTERA_2BAY_U	CTERA_2BAY_U		2232
+sas_c			MACH_SAS_C		SAS_C			2233
+vma2315			MACH_VMA2315		VMA2315			2234
+vcs			MACH_VCS		VCS			2235
+spear600		MACH_SPEAR600		SPEAR600		2236
+spear300		MACH_SPEAR300		SPEAR300		2237
+spear1300		MACH_SPEAR1300		SPEAR1300		2238
+lilly1131		MACH_LILLY1131		LILLY1131		2239
+arvoo_ax301		MACH_ARVOO_AX301	ARVOO_AX301		2240
+mapphone		MACH_MAPPHONE		MAPPHONE		2241
+legend			MACH_LEGEND		LEGEND			2242
+salsa			MACH_SALSA		SALSA			2243
+lounge			MACH_LOUNGE		LOUNGE			2244
+vision			MACH_VISION		VISION			2245
+vmb20			MACH_VMB20		VMB20			2246
+hy2410			MACH_HY2410		HY2410			2247
+hy9315			MACH_HY9315		HY9315			2248
+bullwinkle		MACH_BULLWINKLE		BULLWINKLE		2249
+arm_ultimator2		MACH_ARM_ULTIMATOR2	ARM_ULTIMATOR2		2250
+vs_v210			MACH_VS_V210		VS_V210			2252
+vs_v212			MACH_VS_V212		VS_V212			2253
+hmt			MACH_HMT		HMT			2254
+suen3			MACH_SUEN3		SUEN3			2255
+vesper			MACH_VESPER		VESPER			2256
+str9			MACH_STR9		STR9			2257
+omap3_wl_ff		MACH_OMAP3_WL_FF	OMAP3_WL_FF		2258
+simcom			MACH_SIMCOM		SIMCOM			2259
+mcwebio			MACH_MCWEBIO		MCWEBIO			2260

arch/blackfin/include/asm/.gitignore

@@ -1 +0,0 @@
-+mach

arch/blackfin/include/asm/flat.h

@@ -10,7 +10,6 @@
 
 #include <asm/unaligned.h>
 
-#define	flat_stack_align(sp)	/* nothing needed */
 #define	flat_argvp_envp_on_stack()		0
 #define	flat_old_ram_flag(flags)		(flags)
 

arch/blackfin/include/asm/unistd.h

@@ -378,8 +378,10 @@
 #define __NR_dup3		363
 #define __NR_pipe2		364
 #define __NR_inotify_init1	365
+#define __NR_preadv		366
+#define __NR_pwritev		367
 
-#define __NR_syscall		366
+#define __NR_syscall		368
 #define NR_syscalls		__NR_syscall
 
 /* Old optional stuff no one actually uses */

arch/blackfin/kernel/.gitignore

@@ -0,0 +1 @@
+vmlinux.lds

arch/blackfin/lib/strncmp.c

@@ -8,9 +8,8 @@
 
 #define strncmp __inline_strncmp
 #include <asm/string.h>
-#undef strncmp
-
 #include <linux/module.h>
+#undef strncmp
 
 int strncmp(const char *cs, const char *ct, size_t count)
 {

arch/blackfin/mach-common/entry.S

@@ -1581,6 +1581,8 @@ ENTRY(_sys_call_table)
 	.long _sys_dup3
 	.long _sys_pipe2
 	.long _sys_inotify_init1	/* 365 */
+	.long _sys_preadv
+	.long _sys_pwritev
 
 	.rept NR_syscalls-(.-_sys_call_table)/4
 	.long _sys_ni_syscall

arch/h8300/include/asm/flat.h

@@ -5,7 +5,6 @@
 #ifndef __H8300_FLAT_H__
 #define __H8300_FLAT_H__
 
-#define	flat_stack_align(sp)			/* nothing needed */
 #define	flat_argvp_envp_on_stack()		1
 #define	flat_old_ram_flag(flags)		1
 #define	flat_reloc_valid(reloc, size)		((reloc) <= (size))

arch/m32r/include/asm/flat.h

@@ -12,7 +12,6 @@
 #ifndef __ASM_M32R_FLAT_H
 #define __ASM_M32R_FLAT_H
 
-#define	flat_stack_align(sp)		(*sp += (*sp & 3 ? (4 - (*sp & 3)): 0))
 #define	flat_argvp_envp_on_stack()		0
 #define	flat_old_ram_flag(flags)		(flags)
 #define	flat_set_persistent(relval, p)		0

arch/m68k/include/asm/flat.h

@@ -5,7 +5,6 @@
 #ifndef __M68KNOMMU_FLAT_H__
 #define __M68KNOMMU_FLAT_H__
 
-#define	flat_stack_align(sp)			/* nothing needed */
 #define	flat_argvp_envp_on_stack()		1
 #define	flat_old_ram_flag(flags)		(flags)
 #define	flat_reloc_valid(reloc, size)		((reloc) <= (size))

arch/mips/Kconfig

@@ -72,6 +72,7 @@ config MIPS_COBALT
 	select IRQ_CPU
 	select IRQ_GT641XX
 	select PCI_GT64XXX_PCI0
+	select PCI
 	select SYS_HAS_CPU_NEVADA
 	select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_32BIT_KERNEL
@@ -593,7 +594,7 @@ config WR_PPMC
 	  board, which is based on GT64120 bridge chip.
 
 config CAVIUM_OCTEON_SIMULATOR
-	bool "Support for the Cavium Networks Octeon Simulator"
+	bool "Cavium Networks Octeon Simulator"
 	select CEVT_R4K
 	select 64BIT_PHYS_ADDR
 	select DMA_COHERENT
@@ -607,7 +608,7 @@ config CAVIUM_OCTEON_SIMULATOR
 	  hardware.
 
 config CAVIUM_OCTEON_REFERENCE_BOARD
-	bool "Support for the Cavium Networks Octeon reference board"
+	bool "Cavium Networks Octeon reference board"
 	select CEVT_R4K
 	select 64BIT_PHYS_ADDR
 	select DMA_COHERENT

arch/mips/include/asm/cpu-info.h

@@ -39,8 +39,8 @@ struct cache_desc {
 #define MIPS_CACHE_PINDEX	0x00000020	/* Physically indexed cache */
 
 struct cpuinfo_mips {
-	unsigned long		udelay_val;
-	unsigned long		asid_cache;
+	unsigned int		udelay_val;
+	unsigned int		asid_cache;
 
 	/*
 	 * Capability and feature descriptor structure for MIPS CPU

arch/mips/include/asm/delay.h

@@ -11,94 +11,12 @@
 #ifndef _ASM_DELAY_H
 #define _ASM_DELAY_H
 
-#include <linux/param.h>
-#include <linux/smp.h>
+extern void __delay(unsigned int loops);
+extern void __ndelay(unsigned int ns);
+extern void __udelay(unsigned int us);
 
-#include <asm/compiler.h>
-#include <asm/war.h>
-
-static inline void __delay(unsigned long loops)
-{
-	if (sizeof(long) == 4)
-		__asm__ __volatile__ (
-		"	.set	noreorder				\n"
-		"	.align	3					\n"
-		"1:	bnez	%0, 1b					\n"
-		"	subu	%0, 1					\n"
-		"	.set	reorder					\n"
-		: "=r" (loops)
-		: "0" (loops));
-	else if (sizeof(long) == 8 && !DADDI_WAR)
-		__asm__ __volatile__ (
-		"	.set	noreorder				\n"
-		"	.align	3					\n"
-		"1:	bnez	%0, 1b					\n"
-		"	dsubu	%0, 1					\n"
-		"	.set	reorder					\n"
-		: "=r" (loops)
-		: "0" (loops));
-	else if (sizeof(long) == 8 && DADDI_WAR)
-		__asm__ __volatile__ (
-		"	.set	noreorder				\n"
-		"	.align	3					\n"
-		"1:	bnez	%0, 1b					\n"
-		"	dsubu	%0, %2					\n"
-		"	.set	reorder					\n"
-		: "=r" (loops)
-		: "0" (loops), "r" (1));
-}
-
-
-/*
- * Division by multiplication: you don't have to worry about
- * loss of precision.
- *
- * Use only for very small delays ( < 1 msec).  Should probably use a
- * lookup table, really, as the multiplications take much too long with
- * short delays.  This is a "reasonable" implementation, though (and the
- * first constant multiplications gets optimized away if the delay is
- * a constant)
- */
-
-static inline void __udelay(unsigned long usecs, unsigned long lpj)
-{
-	unsigned long hi, lo;
-
-	/*
-	 * The rates of 128 is rounded wrongly by the catchall case
-	 * for 64-bit.  Excessive precission?  Probably ...
-	 */
-#if defined(CONFIG_64BIT) && (HZ == 128)
-	usecs *= 0x0008637bd05af6c7UL;		/* 2**64 / (1000000 / HZ) */
-#elif defined(CONFIG_64BIT)
-	usecs *= (0x8000000000000000UL / (500000 / HZ));
-#else /* 32-bit junk follows here */
-	usecs *= (unsigned long) (((0x8000000000000000ULL / (500000 / HZ)) +
-	                           0x80000000ULL) >> 32);
-#endif
-
-	if (sizeof(long) == 4)
-		__asm__("multu\t%2, %3"
-		: "=h" (usecs), "=l" (lo)
-		: "r" (usecs), "r" (lpj)
-		: GCC_REG_ACCUM);
-	else if (sizeof(long) == 8 && !R4000_WAR)
-		__asm__("dmultu\t%2, %3"
-		: "=h" (usecs), "=l" (lo)
-		: "r" (usecs), "r" (lpj)
-		: GCC_REG_ACCUM);
-	else if (sizeof(long) == 8 && R4000_WAR)
-		__asm__("dmultu\t%3, %4\n\tmfhi\t%0"
-		: "=r" (usecs), "=h" (hi), "=l" (lo)
-		: "r" (usecs), "r" (lpj)
-		: GCC_REG_ACCUM);
-
-	__delay(usecs);
-}
-
-#define __udelay_val cpu_data[raw_smp_processor_id()].udelay_val
-
-#define udelay(usecs) __udelay((usecs), __udelay_val)
+#define ndelay(ns) __udelay(ns)
+#define udelay(us) __udelay(us)
 
 /* make sure "usecs *= ..." in udelay do not overflow. */
 #if HZ >= 1000

arch/mips/include/asm/ioctl.h

@@ -60,12 +60,16 @@
 	 ((nr)   << _IOC_NRSHIFT) | \
 	 ((size) << _IOC_SIZESHIFT))
 
+#ifdef __KERNEL__
 /* provoke compile error for invalid uses of size argument */
 extern unsigned int __invalid_size_argument_for_IOC;
 #define _IOC_TYPECHECK(t) \
 	((sizeof(t) == sizeof(t[1]) && \
 	  sizeof(t) < (1 << _IOC_SIZEBITS)) ? \
 	  sizeof(t) : __invalid_size_argument_for_IOC)
+#else
+#define _IOC_TYPECHECK(t)	(sizeof(t))
+#endif
 
 /* used to create numbers */
 #define _IO(type, nr)		_IOC(_IOC_NONE, (type), (nr), 0)

arch/mips/include/asm/uaccess.h

@@ -956,7 +956,7 @@ __clear_user(void __user *addr, __kernel_size_t size)
 	void __user * __cl_addr = (addr);				\
 	unsigned long __cl_size = (n);					\
 	if (__cl_size && access_ok(VERIFY_WRITE,			\
-		((unsigned long)(__cl_addr)), __cl_size))		\
+					__cl_addr, __cl_size))		\
 		__cl_size = __clear_user(__cl_addr, __cl_size);		\
 	__cl_size;							\
 })

arch/mips/kernel/proc.c

@@ -42,7 +42,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	seq_printf(m, fmt, __cpu_name[n],
 	                           (version >> 4) & 0x0f, version & 0x0f,
 	                           (fp_vers >> 4) & 0x0f, fp_vers & 0x0f);
-	seq_printf(m, "BogoMIPS\t\t: %lu.%02lu\n",
+	seq_printf(m, "BogoMIPS\t\t: %u.%02u\n",
 	              cpu_data[n].udelay_val / (500000/HZ),
 	              (cpu_data[n].udelay_val / (5000/HZ)) % 100);
 	seq_printf(m, "wait instruction\t: %s\n", cpu_wait ? "yes" : "no");

arch/mips/lib/Makefile

@@ -2,8 +2,8 @@
 # Makefile for MIPS-specific library files..
 #
 
-lib-y	+= csum_partial.o memcpy.o memcpy-inatomic.o memset.o strlen_user.o \
-	   strncpy_user.o strnlen_user.o uncached.o
+lib-y	+= csum_partial.o delay.o memcpy.o memcpy-inatomic.o memset.o \
+	   strlen_user.o strncpy_user.o strnlen_user.o uncached.o
 
 obj-y			+= iomap.o
 obj-$(CONFIG_PCI)	+= iomap-pci.o

arch/mips/lib/delay.c

@@ -0,0 +1,56 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 by Waldorf Electronics
+ * Copyright (C) 1995 - 2000, 01, 03 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2007  Maciej W. Rozycki
+ */
+#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/smp.h>
+
+#include <asm/compiler.h>
+#include <asm/war.h>
+
+inline void __delay(unsigned int loops)
+{
+	__asm__ __volatile__ (
+	"	.set	noreorder				\n"
+	"	.align	3					\n"
+	"1:	bnez	%0, 1b					\n"
+	"	subu	%0, 1					\n"
+	"	.set	reorder					\n"
+	: "=r" (loops)
+	: "0" (loops));
+}
+EXPORT_SYMBOL(__delay);
+
+/*
+ * Division by multiplication: you don't have to worry about
+ * loss of precision.
+ *
+ * Use only for very small delays ( < 1 msec).  Should probably use a
+ * lookup table, really, as the multiplications take much too long with
+ * short delays.  This is a "reasonable" implementation, though (and the
+ * first constant multiplications gets optimized away if the delay is
+ * a constant)
+ */
+
+void __udelay(unsigned long us)
+{
+	unsigned int lpj = current_cpu_data.udelay_val;
+
+	__delay((us * 0x000010c7 * HZ * lpj) >> 32);
+}
+EXPORT_SYMBOL(__udelay);
+
+void __ndelay(unsigned long ns)
+{
+	unsigned int lpj = current_cpu_data.udelay_val;
+
+	__delay((us * 0x00000005 * HZ * lpj) >> 32);
+}
+EXPORT_SYMBOL(__ndelay);

arch/mips/sgi-ip32/ip32-reset.c

@@ -53,7 +53,7 @@ static inline void ip32_machine_halt(void)
 
 static void ip32_machine_power_off(void)
 {
-	volatile unsigned char reg_a, xctrl_a, xctrl_b;
+	unsigned char reg_a, xctrl_a, xctrl_b;
 
 	disable_irq(MACEISA_RTC_IRQ);
 	reg_a = CMOS_READ(RTC_REG_A);
@@ -91,9 +91,10 @@ static void blink_timeout(unsigned long data)
 
 static void debounce(unsigned long data)
 {
-	volatile unsigned char reg_a, reg_c, xctrl_a;
+	unsigned char reg_a, reg_c, xctrl_a;
 
 	reg_c = CMOS_READ(RTC_INTR_FLAGS);
+	reg_a = CMOS_READ(RTC_REG_A);
 	CMOS_WRITE(reg_a | DS_REGA_DV0, RTC_REG_A);
 	wbflush();
 	xctrl_a = CMOS_READ(DS_B1_XCTRL4A);
@@ -137,7 +138,7 @@ static inline void ip32_power_button(void)
 
 static irqreturn_t ip32_rtc_int(int irq, void *dev_id)
 {
-	volatile unsigned char reg_c;
+	unsigned char reg_c;
 
 	reg_c = CMOS_READ(RTC_INTR_FLAGS);
 	if (!(reg_c & RTC_IRQF)) {

arch/mips/sibyte/cfe/setup.c

@@ -288,13 +288,7 @@ void __init prom_init(void)
 	 */
 	cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE);
 	if (cfe_getenv("LINUX_CMDLINE", arcs_cmdline, CL_SIZE) < 0) {
-		if (argc < 0) {
-			/*
-			 * It's OK for direct boot to not provide a
-			 *  command line
-			 */
-			strcpy(arcs_cmdline, "root=/dev/ram0 ");
-		} else {
+		if (argc >= 0) {
 			/* The loader should have set the command line */
 			/* too early for panic to do any good */
 			printk("LINUX_CMDLINE not defined in cfe.");

arch/powerpc/Kconfig

@@ -868,6 +868,18 @@ config TASK_SIZE
 	default "0x80000000" if PPC_PREP || PPC_8xx
 	default "0xc0000000"
 
+config CONSISTENT_SIZE_BOOL
+	bool "Set custom consistent memory pool size"
+	depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
+	help
+	  This option allows you to set the size of the
+	  consistent memory pool.  This pool of virtual memory
+	  is used to make consistent memory allocations.
+
+config CONSISTENT_SIZE
+	hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL
+	default "0x00200000" if NOT_COHERENT_CACHE
+
 config PIN_TLB
 	bool "Pinned Kernel TLBs (860 ONLY)"
 	depends on ADVANCED_OPTIONS && 8xx

arch/powerpc/configs/pmac32_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Tue Nov 11 19:36:51 2008
+# Linux kernel version: 2.6.30-rc7
+# Mon May 25 14:53:25 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
@@ -43,7 +44,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -52,12 +53,14 @@ CONFIG_OF=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 CONFIG_HIBERNATE_32=y
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -72,14 +75,24 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -88,23 +101,27 @@ CONFIG_NAMESPACES=y
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -114,10 +131,12 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
@@ -127,10 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -138,11 +157,8 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_LSF=y
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -158,14 +174,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
 CONFIG_FREEZER=y
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -178,7 +191,9 @@ CONFIG_PPC_PMAC=y
 # CONFIG_PPC_83xx is not set
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
 CONFIG_PPC_NATIVE=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
@@ -212,11 +227,12 @@ CONFIG_CPU_FREQ_PMAC=y
 CONFIG_PPC601_SYNC_FIX=y
 # CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
 #
-# CONFIG_HIGHMEM is not set
+CONFIG_HIGHMEM=y
 CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -239,6 +255,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -250,12 +267,17 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_MIGRATION is not set
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -288,6 +310,8 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 CONFIG_PCCARD=m
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=m
@@ -397,6 +421,8 @@ CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 # CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
 # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_HL=m
+# CONFIG_NETFILTER_XT_TARGET_LED is not set
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
@@ -405,6 +431,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 # CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -415,6 +442,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
@@ -478,17 +506,15 @@ CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_IP_DCCP=m
 CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
 
 #
 # DCCP CCIDs Configuration (EXPERIMENTAL)
 #
-CONFIG_IP_DCCP_CCID2=m
 # CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
+CONFIG_IP_DCCP_CCID3=y
 # CONFIG_IP_DCCP_CCID3_DEBUG is not set
 CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+CONFIG_IP_DCCP_TFRC_LIB=y
 
 #
 # DCCP Kernel Hacking
@@ -508,13 +534,16 @@ CONFIG_IP_DCCP_TFRC_LIB=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 CONFIG_IRDA=m
@@ -577,8 +606,6 @@ CONFIG_BT_HIDP=m
 #
 # Bluetooth device drivers
 #
-CONFIG_BT_HCIUSB=m
-# CONFIG_BT_HCIUSB_SCO is not set
 # CONFIG_BT_HCIBTUSB is not set
 # CONFIG_BT_HCIUART is not set
 CONFIG_BT_HCIBCM203X=m
@@ -590,31 +617,27 @@ CONFIG_BT_HCIBFUSB=m
 # CONFIG_BT_HCIBTUART is not set
 # CONFIG_BT_HCIVHCI is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 CONFIG_CFG80211=m
-CONFIG_NL80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
 CONFIG_MAC80211=m
 
 #
 # Rate control algorithm selection
 #
-CONFIG_MAC80211_RC_PID=y
-# CONFIG_MAC80211_RC_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT="pid"
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
 # CONFIG_MAC80211_MESH is not set
 CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
 # CONFIG_MAC80211_DEBUG_MENU is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -662,17 +685,27 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_XFER_MODE=y
 CONFIG_IDE_TIMINGS=y
 CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
@@ -684,7 +717,6 @@ CONFIG_BLK_DEV_IDECS=m
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDESCSI=y
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
@@ -714,6 +746,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
 # CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
@@ -728,7 +761,6 @@ CONFIG_BLK_DEV_SL82C105=y
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDE_PMAC=y
 CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
-CONFIG_BLK_DEV_IDEDMA_PMAC=y
 CONFIG_BLK_DEV_IDEDMA=y
 
 #
@@ -772,6 +804,7 @@ CONFIG_SCSI_FC_ATTRS=y
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -791,8 +824,12 @@ CONFIG_SCSI_AIC7XXX_OLD=m
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -822,6 +859,7 @@ CONFIG_SCSI_MAC53C94=y
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
@@ -881,6 +919,7 @@ CONFIG_THERM_ADT746X=m
 # CONFIG_ANSLCD is not set
 CONFIG_PMAC_RACKMETER=m
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -898,6 +937,8 @@ CONFIG_BMAC=y
 CONFIG_SUNGEM=y
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -913,7 +954,6 @@ CONFIG_PCNET32=y
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -923,6 +963,7 @@ CONFIG_PCNET32=y
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -935,6 +976,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -945,18 +987,20 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -966,6 +1010,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -974,20 +1019,11 @@ CONFIG_NETDEV_10000=y
 # CONFIG_WLAN_PRE80211 is not set
 CONFIG_WLAN_80211=y
 # CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
 # CONFIG_LIBERTAS is not set
 # CONFIG_LIBERTAS_THINFIRM is not set
 # CONFIG_AIRO is not set
-CONFIG_HERMES=m
-CONFIG_APPLE_AIRPORT=m
-# CONFIG_PLX_HERMES is not set
-# CONFIG_TMD_HERMES is not set
-# CONFIG_NORTEL_HERMES is not set
-CONFIG_PCI_HERMES=m
-CONFIG_PCMCIA_HERMES=m
-# CONFIG_PCMCIA_SPECTRUM is not set
 # CONFIG_ATMEL is not set
+# CONFIG_AT76C50X_USB is not set
 # CONFIG_AIRO_CS is not set
 # CONFIG_PCMCIA_WL3501 is not set
 CONFIG_PRISM54=m
@@ -997,15 +1033,17 @@ CONFIG_PRISM54=m
 # CONFIG_RTL8187 is not set
 # CONFIG_ADM8211 is not set
 # CONFIG_MAC80211_HWSIM is not set
+# CONFIG_MWL8K is not set
 CONFIG_P54_COMMON=m
 # CONFIG_P54_USB is not set
 # CONFIG_P54_PCI is not set
+CONFIG_P54_LEDS=y
 # CONFIG_ATH5K is not set
 # CONFIG_ATH9K is not set
-# CONFIG_IWLCORE is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_IWLAGN is not set
-# CONFIG_IWL3945 is not set
+# CONFIG_AR9170_USB is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_IWLWIFI is not set
 # CONFIG_HOSTAP is not set
 CONFIG_B43=m
 CONFIG_B43_PCI_AUTOSELECT=y
@@ -1025,6 +1063,19 @@ CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
 # CONFIG_B43LEGACY_PIO_MODE is not set
 # CONFIG_ZD1211RW is not set
 # CONFIG_RT2X00 is not set
+CONFIG_HERMES=m
+CONFIG_HERMES_CACHE_FW_ON_INIT=y
+CONFIG_APPLE_AIRPORT=m
+# CONFIG_PLX_HERMES is not set
+# CONFIG_TMD_HERMES is not set
+# CONFIG_NORTEL_HERMES is not set
+CONFIG_PCI_HERMES=m
+CONFIG_PCMCIA_HERMES=m
+# CONFIG_PCMCIA_SPECTRUM is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 
 #
 # USB Network Adapters
@@ -1036,6 +1087,7 @@ CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
 CONFIG_USB_USBNET=m
 CONFIG_USB_NET_AX8817X=m
 CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_CDC_EEM is not set
 # CONFIG_USB_NET_DM9601 is not set
 # CONFIG_USB_NET_SMSC95XX is not set
 # CONFIG_USB_NET_GL620A is not set
@@ -1099,7 +1151,7 @@ CONFIG_INPUT_KEYBOARD=y
 CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
+CONFIG_MOUSE_APPLETOUCH=y
 # CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
@@ -1150,10 +1202,13 @@ CONFIG_SERIAL_PMACZILOG_TTYS=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 CONFIG_NVRAM=y
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -1232,12 +1287,9 @@ CONFIG_I2C_POWERMAC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -1259,11 +1311,11 @@ CONFIG_BATTERY_PMU=y
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 CONFIG_SSB=m
 CONFIG_SSB_SPROM=y
 CONFIG_SSB_PCIHOST_POSSIBLE=y
@@ -1281,18 +1333,13 @@ CONFIG_SSB_DRIVER_PCICORE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -1390,6 +1437,7 @@ CONFIG_FB_ATY_BACKLIGHT=y
 # CONFIG_FB_KYRO is not set
 CONFIG_FB_3DFX=y
 # CONFIG_FB_3DFX_ACCEL is not set
+CONFIG_FB_3DFX_I2C=y
 # CONFIG_FB_VOODOO1 is not set
 # CONFIG_FB_VT8623 is not set
 # CONFIG_FB_TRIDENT is not set
@@ -1399,12 +1447,14 @@ CONFIG_FB_3DFX=y
 # CONFIG_FB_IBM_GXT4500 is not set
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=m
 # CONFIG_LCD_ILI9320 is not set
 # CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_GENERIC=y
 
 #
 # Display device support
@@ -1444,11 +1494,13 @@ CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
 CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_HRTIMER is not set
 # CONFIG_SND_DYNAMIC_MINORS is not set
 CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
 CONFIG_SND_DRIVERS=y
 CONFIG_SND_DUMMY=m
 # CONFIG_SND_VIRMIDI is not set
@@ -1486,6 +1538,8 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_INDIGO is not set
 # CONFIG_SND_INDIGOIO is not set
 # CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
 # CONFIG_SND_EMU10K1 is not set
 # CONFIG_SND_EMU10K1X is not set
 # CONFIG_SND_ENS1370 is not set
@@ -1551,28 +1605,31 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_TOPSEED=y
 # CONFIG_THRUSTMASTER_FF is not set
 # CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_SUPPORT=y
@@ -1603,6 +1660,7 @@ CONFIG_USB_EHCI_HCD=m
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_EHCI_HCD_PPC_OF is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -1625,24 +1683,23 @@ CONFIG_USB_PRINTER=m
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
-CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_ONETOUCH=m
 # CONFIG_USB_STORAGE_KARMA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
@@ -1665,7 +1722,7 @@ CONFIG_USB_EZUSB=y
 # CONFIG_USB_SERIAL_CH341 is not set
 # CONFIG_USB_SERIAL_WHITEHEAT is not set
 # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CP210X is not set
 # CONFIG_USB_SERIAL_CYPRESS_M8 is not set
 # CONFIG_USB_SERIAL_EMPEG is not set
 # CONFIG_USB_SERIAL_FTDI_SIO is not set
@@ -1701,15 +1758,19 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
 # CONFIG_USB_SERIAL_NAVMAN is not set
 # CONFIG_USB_SERIAL_PL2303 is not set
 # CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
 # CONFIG_USB_SERIAL_SPCP8X5 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 # CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
 # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
 # CONFIG_USB_SERIAL_TI is not set
 # CONFIG_USB_SERIAL_CYBERJACK is not set
 # CONFIG_USB_SERIAL_XIRCOM is not set
 # CONFIG_USB_SERIAL_OPTION is not set
 # CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
 # CONFIG_USB_SERIAL_DEBUG is not set
 
 #
@@ -1726,7 +1787,6 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 CONFIG_USB_APPLEDISPLAY=m
@@ -1738,6 +1798,11 @@ CONFIG_USB_APPLEDISPLAY=m
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1748,7 +1813,9 @@ CONFIG_LEDS_CLASS=y
 # LED drivers
 #
 # CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_LP5521 is not set
 # CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
 
 #
 # LED Triggers
@@ -1759,11 +1826,16 @@ CONFIG_LEDS_TRIGGER_IDE_DISK=y
 # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
 # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1774,6 +1846,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1783,7 +1856,9 @@ CONFIG_EXT4_FS_XATTR=y
 # CONFIG_EXT4_FS_POSIX_ACL is not set
 # CONFIG_EXT4_FS_SECURITY is not set
 CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
 CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
@@ -1792,6 +1867,7 @@ CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1800,6 +1876,11 @@ CONFIG_INOTIFY_USER=y
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1831,10 +1912,7 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 CONFIG_HFS_FS=m
@@ -1843,6 +1921,7 @@ CONFIG_HFSPLUS_FS=m
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1851,6 +1930,7 @@ CONFIG_HFSPLUS_FS=m
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1868,7 +1948,6 @@ CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1940,11 +2019,13 @@ CONFIG_NLS_ISO8859_1=m
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
+CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
@@ -1954,15 +2035,18 @@ CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1973,13 +2057,16 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
@@ -1994,6 +2081,7 @@ CONFIG_SCHEDSTATS=y
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
@@ -2001,6 +2089,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -2009,7 +2098,14 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_FAULT_INJECTION is not set
 CONFIG_LATENCYTOP=y
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -2017,12 +2113,19 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
@@ -2033,6 +2136,7 @@ CONFIG_XMON_DEFAULT=y
 CONFIG_XMON_DISASSEMBLY=y
 CONFIG_DEBUGGER=y
 CONFIG_IRQSTACKS=y
+# CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
 CONFIG_BOOTX_TEXT=y
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -2051,13 +2155,20 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_AUTHENC=y
 # CONFIG_CRYPTO_TEST is not set
@@ -2127,6 +2238,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #

arch/powerpc/include/asm/dma-mapping.h

@@ -26,7 +26,9 @@
  * allocate the space "normally" and use the cache management functions
  * to ensure it is consistent.
  */
-extern void *__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp);
+struct device;
+extern void *__dma_alloc_coherent(struct device *dev, size_t size,
+				  dma_addr_t *handle, gfp_t gfp);
 extern void __dma_free_coherent(size_t size, void *vaddr);
 extern void __dma_sync(void *vaddr, size_t size, int direction);
 extern void __dma_sync_page(struct page *page, unsigned long offset,
@@ -37,7 +39,7 @@ extern void __dma_sync_page(struct page *page, unsigned long offset,
  * Cache coherent cores.
  */
 
-#define __dma_alloc_coherent(gfp, size, handle)	NULL
+#define __dma_alloc_coherent(dev, gfp, size, handle)	NULL
 #define __dma_free_coherent(size, addr)		((void)0)
 #define __dma_sync(addr, size, rw)		((void)0)
 #define __dma_sync_page(pg, off, sz, rw)	((void)0)

arch/powerpc/include/asm/fixmap.h

@@ -14,8 +14,6 @@
 #ifndef _ASM_FIXMAP_H
 #define _ASM_FIXMAP_H
 
-extern unsigned long FIXADDR_TOP;
-
 #ifndef __ASSEMBLY__
 #include <linux/kernel.h>
 #include <asm/page.h>
@@ -24,6 +22,8 @@ extern unsigned long FIXADDR_TOP;
 #include <asm/kmap_types.h>
 #endif
 
+#define FIXADDR_TOP	((unsigned long)(-PAGE_SIZE))
+
 /*
  * Here we define all the compile-time 'special' virtual
  * addresses. The point is to have a constant address at

arch/powerpc/include/asm/pgtable-ppc32.h

@@ -10,7 +10,7 @@
 
 extern unsigned long va_to_phys(unsigned long address);
 extern pte_t *va_to_pte(unsigned long address);
-extern unsigned long ioremap_bot, ioremap_base;
+extern unsigned long ioremap_bot;
 
 #ifdef CONFIG_44x
 extern int icache_44x_need_flush;
@@ -55,9 +55,31 @@ extern int icache_44x_need_flush;
 #define pgd_ERROR(e) \
 	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
 
+/*
+ * This is the bottom of the PKMAP area with HIGHMEM or an arbitrary
+ * value (for now) on others, from where we can start layout kernel
+ * virtual space that goes below PKMAP and FIXMAP
+ */
+#ifdef CONFIG_HIGHMEM
+#define KVIRT_TOP	PKMAP_BASE
+#else
+#define KVIRT_TOP	(0xfe000000UL)	/* for now, could be FIXMAP_BASE ? */
+#endif
+
+/*
+ * ioremap_bot starts at that address. Early ioremaps move down from there,
+ * until mem_init() at which point this becomes the top of the vmalloc
+ * and ioremap space
+ */
+#ifdef CONFIG_NOT_COHERENT_CACHE
+#define IOREMAP_TOP	((KVIRT_TOP - CONFIG_CONSISTENT_SIZE) & PAGE_MASK)
+#else
+#define IOREMAP_TOP	KVIRT_TOP
+#endif
+
 /*
  * Just any arbitrary offset to the start of the vmalloc VM area: the
- * current 64MB value just means that there will be a 64MB "hole" after the
+ * current 16MB value just means that there will be a 64MB "hole" after the
  * physical memory until the kernel virtual memory starts.  That means that
  * any out-of-bounds memory accesses will hopefully be caught.
  * The vmalloc() routines leaves a hole of 4kB between each vmalloced

arch/powerpc/kernel/dma.c

@@ -32,7 +32,7 @@ void *dma_direct_alloc_coherent(struct device *dev, size_t size,
 {
 	void *ret;
 #ifdef CONFIG_NOT_COHERENT_CACHE
-	ret = __dma_alloc_coherent(size, dma_handle, flag);
+	ret = __dma_alloc_coherent(dev, size, dma_handle, flag);
 	if (ret == NULL)
 		return NULL;
 	*dma_handle += get_dma_direct_offset(dev);

arch/powerpc/lib/Makefile

@@ -18,7 +18,6 @@ obj-$(CONFIG_PPC64)	+= copypage_64.o copyuser_64.o \
 			   memcpy_64.o usercopy_64.o mem_64.o string.o
 obj-$(CONFIG_XMON)	+= sstep.o
 obj-$(CONFIG_KPROBES)	+= sstep.o
-obj-$(CONFIG_NOT_COHERENT_CACHE)	+= dma-noncoherent.o
 
 ifeq ($(CONFIG_PPC64),y)
 obj-$(CONFIG_SMP)	+= locks.o

arch/powerpc/lib/dma-noncoherent.c

@@ -1,237 +0,0 @@
-/*
- *  PowerPC version derived from arch/arm/mm/consistent.c
- *    Copyright (C) 2001 Dan Malek (dmalek@jlc.net)
- *
- *  Copyright (C) 2000 Russell King
- *
- * Consistent memory allocators.  Used for DMA devices that want to
- * share uncached memory with the processor core.  The function return
- * is the virtual address and 'dma_handle' is the physical address.
- * Mostly stolen from the ARM port, with some changes for PowerPC.
- *						-- Dan
- *
- * Reorganized to get rid of the arch-specific consistent_* functions
- * and provide non-coherent implementations for the DMA API. -Matt
- *
- * Added in_interrupt() safe dma_alloc_coherent()/dma_free_coherent()
- * implementation. This is pulled straight from ARM and barely
- * modified. -Matt
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/highmem.h>
-#include <linux/dma-mapping.h>
-#include <linux/vmalloc.h>
-
-#include <asm/tlbflush.h>
-
-/*
- * Allocate DMA-coherent memory space and return both the kernel remapped
- * virtual and bus address for that space.
- */
-void *
-__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp)
-{
-	struct page *page;
-	unsigned long order;
-	int i;
-	unsigned int nr_pages = PAGE_ALIGN(size)>>PAGE_SHIFT;
-	unsigned int array_size = nr_pages * sizeof(struct page *);
-	struct page **pages;
-	struct page *end;
-	u64 mask = 0x00ffffff, limit; /* ISA default */
-	struct vm_struct *area;
-
-	BUG_ON(!mem_init_done);
-	size = PAGE_ALIGN(size);
-	limit = (mask + 1) & ~mask;
-	if (limit && size >= limit) {
-		printk(KERN_WARNING "coherent allocation too big (requested "
-				"%#x mask %#Lx)\n", size, mask);
-		return NULL;
-	}
-
-	order = get_order(size);
-
-	if (mask != 0xffffffff)
-		gfp |= GFP_DMA;
-
-	page = alloc_pages(gfp, order);
-	if (!page)
-		goto no_page;
-
-	end = page + (1 << order);
-
-	/*
-	 * Invalidate any data that might be lurking in the
-	 * kernel direct-mapped region for device DMA.
-	 */
-	{
-		unsigned long kaddr = (unsigned long)page_address(page);
-		memset(page_address(page), 0, size);
-		flush_dcache_range(kaddr, kaddr + size);
-	}
-
-	split_page(page, order);
-
-	/*
-	 * Set the "dma handle"
-	 */
-	*handle = page_to_phys(page);
-
-	area = get_vm_area_caller(size, VM_IOREMAP,
-			__builtin_return_address(1));
-	if (!area)
-		goto out_free_pages;
-
-	if (array_size > PAGE_SIZE) {
-		pages = vmalloc(array_size);
-		area->flags |= VM_VPAGES;
-	} else {
-		pages = kmalloc(array_size, GFP_KERNEL);
-	}
-	if (!pages)
-		goto out_free_area;
-
-	area->pages = pages;
-	area->nr_pages = nr_pages;
-
-	for (i = 0; i < nr_pages; i++)
-		pages[i] = page + i;
-
-	if (map_vm_area(area, pgprot_noncached(PAGE_KERNEL), &pages))
-		goto out_unmap;
-
-	/*
-	 * Free the otherwise unused pages.
-	 */
-	page += nr_pages;
-	while (page < end) {
-		__free_page(page);
-		page++;
-	}
-
-	return area->addr;
-out_unmap:
-	vunmap(area->addr);
-	if (array_size > PAGE_SIZE)
-		vfree(pages);
-	else
-		kfree(pages);
-	goto out_free_pages;
-out_free_area:
-	free_vm_area(area);
-out_free_pages:
-	if (page)
-		__free_pages(page, order);
-no_page:
-	return NULL;
-}
-EXPORT_SYMBOL(__dma_alloc_coherent);
-
-/*
- * free a page as defined by the above mapping.
- */
-void __dma_free_coherent(size_t size, void *vaddr)
-{
-	vfree(vaddr);
-
-}
-EXPORT_SYMBOL(__dma_free_coherent);
-
-/*
- * make an area consistent.
- */
-void __dma_sync(void *vaddr, size_t size, int direction)
-{
-	unsigned long start = (unsigned long)vaddr;
-	unsigned long end   = start + size;
-
-	switch (direction) {
-	case DMA_NONE:
-		BUG();
-	case DMA_FROM_DEVICE:
-		/*
-		 * invalidate only when cache-line aligned otherwise there is
-		 * the potential for discarding uncommitted data from the cache
-		 */
-		if ((start & (L1_CACHE_BYTES - 1)) || (size & (L1_CACHE_BYTES - 1)))
-			flush_dcache_range(start, end);
-		else
-			invalidate_dcache_range(start, end);
-		break;
-	case DMA_TO_DEVICE:		/* writeback only */
-		clean_dcache_range(start, end);
-		break;
-	case DMA_BIDIRECTIONAL:	/* writeback and invalidate */
-		flush_dcache_range(start, end);
-		break;
-	}
-}
-EXPORT_SYMBOL(__dma_sync);
-
-#ifdef CONFIG_HIGHMEM
-/*
- * __dma_sync_page() implementation for systems using highmem.
- * In this case, each page of a buffer must be kmapped/kunmapped
- * in order to have a virtual address for __dma_sync(). This must
- * not sleep so kmap_atomic()/kunmap_atomic() are used.
- *
- * Note: yes, it is possible and correct to have a buffer extend
- * beyond the first page.
- */
-static inline void __dma_sync_page_highmem(struct page *page,
-		unsigned long offset, size_t size, int direction)
-{
-	size_t seg_size = min((size_t)(PAGE_SIZE - offset), size);
-	size_t cur_size = seg_size;
-	unsigned long flags, start, seg_offset = offset;
-	int nr_segs = 1 + ((size - seg_size) + PAGE_SIZE - 1)/PAGE_SIZE;
-	int seg_nr = 0;
-
-	local_irq_save(flags);
-
-	do {
-		start = (unsigned long)kmap_atomic(page + seg_nr,
-				KM_PPC_SYNC_PAGE) + seg_offset;
-
-		/* Sync this buffer segment */
-		__dma_sync((void *)start, seg_size, direction);
-		kunmap_atomic((void *)start, KM_PPC_SYNC_PAGE);
-		seg_nr++;
-
-		/* Calculate next buffer segment size */
-		seg_size = min((size_t)PAGE_SIZE, size - cur_size);
-
-		/* Add the segment size to our running total */
-		cur_size += seg_size;
-		seg_offset = 0;
-	} while (seg_nr < nr_segs);
-
-	local_irq_restore(flags);
-}
-#endif /* CONFIG_HIGHMEM */
-
-/*
- * __dma_sync_page makes memory consistent. identical to __dma_sync, but
- * takes a struct page instead of a virtual address
- */
-void __dma_sync_page(struct page *page, unsigned long offset,
-	size_t size, int direction)
-{
-#ifdef CONFIG_HIGHMEM
-	__dma_sync_page_highmem(page, offset, size, direction);
-#else
-	unsigned long start = (unsigned long)page_address(page) + offset;
-	__dma_sync((void *)start, size, direction);
-#endif
-}
-EXPORT_SYMBOL(__dma_sync_page);

arch/powerpc/mm/Makefile

@@ -26,3 +26,4 @@ obj-$(CONFIG_NEED_MULTIPLE_NODES) += numa.o
 obj-$(CONFIG_PPC_MM_SLICES)	+= slice.o
 obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
 obj-$(CONFIG_PPC_SUBPAGE_PROT)	+= subpage-prot.o
+obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o

arch/powerpc/mm/dma-noncoherent.c

@@ -0,0 +1,400 @@
+/*
+ *  PowerPC version derived from arch/arm/mm/consistent.c
+ *    Copyright (C) 2001 Dan Malek (dmalek@jlc.net)
+ *
+ *  Copyright (C) 2000 Russell King
+ *
+ * Consistent memory allocators.  Used for DMA devices that want to
+ * share uncached memory with the processor core.  The function return
+ * is the virtual address and 'dma_handle' is the physical address.
+ * Mostly stolen from the ARM port, with some changes for PowerPC.
+ *						-- Dan
+ *
+ * Reorganized to get rid of the arch-specific consistent_* functions
+ * and provide non-coherent implementations for the DMA API. -Matt
+ *
+ * Added in_interrupt() safe dma_alloc_coherent()/dma_free_coherent()
+ * implementation. This is pulled straight from ARM and barely
+ * modified. -Matt
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/highmem.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/tlbflush.h>
+
+#include "mmu_decl.h"
+
+/*
+ * This address range defaults to a value that is safe for all
+ * platforms which currently set CONFIG_NOT_COHERENT_CACHE. It
+ * can be further configured for specific applications under
+ * the "Advanced Setup" menu. -Matt
+ */
+#define CONSISTENT_BASE		(IOREMAP_TOP)
+#define CONSISTENT_END 		(CONSISTENT_BASE + CONFIG_CONSISTENT_SIZE)
+#define CONSISTENT_OFFSET(x)	(((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT)
+
+/*
+ * This is the page table (2MB) covering uncached, DMA consistent allocations
+ */
+static DEFINE_SPINLOCK(consistent_lock);
+
+/*
+ * VM region handling support.
+ *
+ * This should become something generic, handling VM region allocations for
+ * vmalloc and similar (ioremap, module space, etc).
+ *
+ * I envisage vmalloc()'s supporting vm_struct becoming:
+ *
+ *  struct vm_struct {
+ *    struct vm_region	region;
+ *    unsigned long	flags;
+ *    struct page	**pages;
+ *    unsigned int	nr_pages;
+ *    unsigned long	phys_addr;
+ *  };
+ *
+ * get_vm_area() would then call vm_region_alloc with an appropriate
+ * struct vm_region head (eg):
+ *
+ *  struct vm_region vmalloc_head = {
+ *	.vm_list	= LIST_HEAD_INIT(vmalloc_head.vm_list),
+ *	.vm_start	= VMALLOC_START,
+ *	.vm_end		= VMALLOC_END,
+ *  };
+ *
+ * However, vmalloc_head.vm_start is variable (typically, it is dependent on
+ * the amount of RAM found at boot time.)  I would imagine that get_vm_area()
+ * would have to initialise this each time prior to calling vm_region_alloc().
+ */
+struct ppc_vm_region {
+	struct list_head	vm_list;
+	unsigned long		vm_start;
+	unsigned long		vm_end;
+};
+
+static struct ppc_vm_region consistent_head = {
+	.vm_list	= LIST_HEAD_INIT(consistent_head.vm_list),
+	.vm_start	= CONSISTENT_BASE,
+	.vm_end		= CONSISTENT_END,
+};
+
+static struct ppc_vm_region *
+ppc_vm_region_alloc(struct ppc_vm_region *head, size_t size, gfp_t gfp)
+{
+	unsigned long addr = head->vm_start, end = head->vm_end - size;
+	unsigned long flags;
+	struct ppc_vm_region *c, *new;
+
+	new = kmalloc(sizeof(struct ppc_vm_region), gfp);
+	if (!new)
+		goto out;
+
+	spin_lock_irqsave(&consistent_lock, flags);
+
+	list_for_each_entry(c, &head->vm_list, vm_list) {
+		if ((addr + size) < addr)
+			goto nospc;
+		if ((addr + size) <= c->vm_start)
+			goto found;
+		addr = c->vm_end;
+		if (addr > end)
+			goto nospc;
+	}
+
+ found:
+	/*
+	 * Insert this entry _before_ the one we found.
+	 */
+	list_add_tail(&new->vm_list, &c->vm_list);
+	new->vm_start = addr;
+	new->vm_end = addr + size;
+
+	spin_unlock_irqrestore(&consistent_lock, flags);
+	return new;
+
+ nospc:
+	spin_unlock_irqrestore(&consistent_lock, flags);
+	kfree(new);
+ out:
+	return NULL;
+}
+
+static struct ppc_vm_region *ppc_vm_region_find(struct ppc_vm_region *head, unsigned long addr)
+{
+	struct ppc_vm_region *c;
+
+	list_for_each_entry(c, &head->vm_list, vm_list) {
+		if (c->vm_start == addr)
+			goto out;
+	}
+	c = NULL;
+ out:
+	return c;
+}
+
+/*
+ * Allocate DMA-coherent memory space and return both the kernel remapped
+ * virtual and bus address for that space.
+ */
+void *
+__dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
+{
+	struct page *page;
+	struct ppc_vm_region *c;
+	unsigned long order;
+	u64 mask = ISA_DMA_THRESHOLD, limit;
+
+	if (dev) {
+		mask = dev->coherent_dma_mask;
+
+		/*
+		 * Sanity check the DMA mask - it must be non-zero, and
+		 * must be able to be satisfied by a DMA allocation.
+		 */
+		if (mask == 0) {
+			dev_warn(dev, "coherent DMA mask is unset\n");
+			goto no_page;
+		}
+
+		if ((~mask) & ISA_DMA_THRESHOLD) {
+			dev_warn(dev, "coherent DMA mask %#llx is smaller "
+				 "than system GFP_DMA mask %#llx\n",
+				 mask, (unsigned long long)ISA_DMA_THRESHOLD);
+			goto no_page;
+		}
+	}
+
+
+	size = PAGE_ALIGN(size);
+	limit = (mask + 1) & ~mask;
+	if ((limit && size >= limit) ||
+	    size >= (CONSISTENT_END - CONSISTENT_BASE)) {
+		printk(KERN_WARNING "coherent allocation too big (requested %#x mask %#Lx)\n",
+		       size, mask);
+		return NULL;
+	}
+
+	order = get_order(size);
+
+	/* Might be useful if we ever have a real legacy DMA zone... */
+	if (mask != 0xffffffff)
+		gfp |= GFP_DMA;
+
+	page = alloc_pages(gfp, order);
+	if (!page)
+		goto no_page;
+
+	/*
+	 * Invalidate any data that might be lurking in the
+	 * kernel direct-mapped region for device DMA.
+	 */
+	{
+		unsigned long kaddr = (unsigned long)page_address(page);
+		memset(page_address(page), 0, size);
+		flush_dcache_range(kaddr, kaddr + size);
+	}
+
+	/*
+	 * Allocate a virtual address in the consistent mapping region.
+	 */
+	c = ppc_vm_region_alloc(&consistent_head, size,
+			    gfp & ~(__GFP_DMA | __GFP_HIGHMEM));
+	if (c) {
+		unsigned long vaddr = c->vm_start;
+		struct page *end = page + (1 << order);
+
+		split_page(page, order);
+
+		/*
+		 * Set the "dma handle"
+		 */
+		*handle = page_to_phys(page);
+
+		do {
+			SetPageReserved(page);
+			map_page(vaddr, page_to_phys(page),
+				 pgprot_noncached(PAGE_KERNEL));
+			page++;
+			vaddr += PAGE_SIZE;
+		} while (size -= PAGE_SIZE);
+
+		/*
+		 * Free the otherwise unused pages.
+		 */
+		while (page < end) {
+			__free_page(page);
+			page++;
+		}
+
+		return (void *)c->vm_start;
+	}
+
+	if (page)
+		__free_pages(page, order);
+ no_page:
+	return NULL;
+}
+EXPORT_SYMBOL(__dma_alloc_coherent);
+
+/*
+ * free a page as defined by the above mapping.
+ */
+void __dma_free_coherent(size_t size, void *vaddr)
+{
+	struct ppc_vm_region *c;
+	unsigned long flags, addr;
+	
+	size = PAGE_ALIGN(size);
+
+	spin_lock_irqsave(&consistent_lock, flags);
+
+	c = ppc_vm_region_find(&consistent_head, (unsigned long)vaddr);
+	if (!c)
+		goto no_area;
+
+	if ((c->vm_end - c->vm_start) != size) {
+		printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n",
+		       __func__, c->vm_end - c->vm_start, size);
+		dump_stack();
+		size = c->vm_end - c->vm_start;
+	}
+
+	addr = c->vm_start;
+	do {
+		pte_t *ptep;
+		unsigned long pfn;
+
+		ptep = pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(addr),
+							       addr),
+						    addr),
+					 addr);
+		if (!pte_none(*ptep) && pte_present(*ptep)) {
+			pfn = pte_pfn(*ptep);
+			pte_clear(&init_mm, addr, ptep);
+			if (pfn_valid(pfn)) {
+				struct page *page = pfn_to_page(pfn);
+
+				ClearPageReserved(page);
+				__free_page(page);
+			}
+		}
+		addr += PAGE_SIZE;
+	} while (size -= PAGE_SIZE);
+
+	flush_tlb_kernel_range(c->vm_start, c->vm_end);
+
+	list_del(&c->vm_list);
+
+	spin_unlock_irqrestore(&consistent_lock, flags);
+
+	kfree(c);
+	return;
+
+ no_area:
+	spin_unlock_irqrestore(&consistent_lock, flags);
+	printk(KERN_ERR "%s: trying to free invalid coherent area: %p\n",
+	       __func__, vaddr);
+	dump_stack();
+}
+EXPORT_SYMBOL(__dma_free_coherent);
+
+/*
+ * make an area consistent.
+ */
+void __dma_sync(void *vaddr, size_t size, int direction)
+{
+	unsigned long start = (unsigned long)vaddr;
+	unsigned long end   = start + size;
+
+	switch (direction) {
+	case DMA_NONE:
+		BUG();
+	case DMA_FROM_DEVICE:
+		/*
+		 * invalidate only when cache-line aligned otherwise there is
+		 * the potential for discarding uncommitted data from the cache
+		 */
+		if ((start & (L1_CACHE_BYTES - 1)) || (size & (L1_CACHE_BYTES - 1)))
+			flush_dcache_range(start, end);
+		else
+			invalidate_dcache_range(start, end);
+		break;
+	case DMA_TO_DEVICE:		/* writeback only */
+		clean_dcache_range(start, end);
+		break;
+	case DMA_BIDIRECTIONAL:	/* writeback and invalidate */
+		flush_dcache_range(start, end);
+		break;
+	}
+}
+EXPORT_SYMBOL(__dma_sync);
+
+#ifdef CONFIG_HIGHMEM
+/*
+ * __dma_sync_page() implementation for systems using highmem.
+ * In this case, each page of a buffer must be kmapped/kunmapped
+ * in order to have a virtual address for __dma_sync(). This must
+ * not sleep so kmap_atomic()/kunmap_atomic() are used.
+ *
+ * Note: yes, it is possible and correct to have a buffer extend
+ * beyond the first page.
+ */
+static inline void __dma_sync_page_highmem(struct page *page,
+		unsigned long offset, size_t size, int direction)
+{
+	size_t seg_size = min((size_t)(PAGE_SIZE - offset), size);
+	size_t cur_size = seg_size;
+	unsigned long flags, start, seg_offset = offset;
+	int nr_segs = 1 + ((size - seg_size) + PAGE_SIZE - 1)/PAGE_SIZE;
+	int seg_nr = 0;
+
+	local_irq_save(flags);
+
+	do {
+		start = (unsigned long)kmap_atomic(page + seg_nr,
+				KM_PPC_SYNC_PAGE) + seg_offset;
+
+		/* Sync this buffer segment */
+		__dma_sync((void *)start, seg_size, direction);
+		kunmap_atomic((void *)start, KM_PPC_SYNC_PAGE);
+		seg_nr++;
+
+		/* Calculate next buffer segment size */
+		seg_size = min((size_t)PAGE_SIZE, size - cur_size);
+
+		/* Add the segment size to our running total */
+		cur_size += seg_size;
+		seg_offset = 0;
+	} while (seg_nr < nr_segs);
+
+	local_irq_restore(flags);
+}
+#endif /* CONFIG_HIGHMEM */
+
+/*
+ * __dma_sync_page makes memory consistent. identical to __dma_sync, but
+ * takes a struct page instead of a virtual address
+ */
+void __dma_sync_page(struct page *page, unsigned long offset,
+	size_t size, int direction)
+{
+#ifdef CONFIG_HIGHMEM
+	__dma_sync_page_highmem(page, offset, size, direction);
+#else
+	unsigned long start = (unsigned long)page_address(page) + offset;
+	__dma_sync((void *)start, size, direction);
+#endif
+}
+EXPORT_SYMBOL(__dma_sync_page);

arch/powerpc/mm/init_32.c

@@ -168,12 +168,8 @@ void __init MMU_init(void)
 		ppc_md.progress("MMU:mapin", 0x301);
 	mapin_ram();
 
-#ifdef CONFIG_HIGHMEM
-	ioremap_base = PKMAP_BASE;
-#else
-	ioremap_base = 0xfe000000UL;	/* for now, could be 0xfffff000 */
-#endif /* CONFIG_HIGHMEM */
-	ioremap_bot = ioremap_base;
+	/* Initialize early top-down ioremap allocator */
+	ioremap_bot = IOREMAP_TOP;
 
 	/* Map in I/O resources */
 	if (ppc_md.progress)

arch/powerpc/mm/mem.c

@@ -380,6 +380,23 @@ void __init mem_init(void)
 		bsssize >> 10,
 		initsize >> 10);
 
+#ifdef CONFIG_PPC32
+	pr_info("Kernel virtual memory layout:\n");
+	pr_info("  * 0x%08lx..0x%08lx  : fixmap\n", FIXADDR_START, FIXADDR_TOP);
+#ifdef CONFIG_HIGHMEM
+	pr_info("  * 0x%08lx..0x%08lx  : highmem PTEs\n",
+		PKMAP_BASE, PKMAP_ADDR(LAST_PKMAP));
+#endif /* CONFIG_HIGHMEM */
+#ifdef CONFIG_NOT_COHERENT_CACHE
+	pr_info("  * 0x%08lx..0x%08lx  : consistent mem\n",
+		IOREMAP_TOP, IOREMAP_TOP + CONFIG_CONSISTENT_SIZE);
+#endif /* CONFIG_NOT_COHERENT_CACHE */
+	pr_info("  * 0x%08lx..0x%08lx  : early ioremap\n",
+		ioremap_bot, IOREMAP_TOP);
+	pr_info("  * 0x%08lx..0x%08lx  : vmalloc & ioremap\n",
+		VMALLOC_START, VMALLOC_END);
+#endif /* CONFIG_PPC32 */
+
 	mem_init_done = 1;
 }
 

arch/powerpc/mm/mmu_context_nohash.c

@@ -127,12 +127,12 @@ static unsigned int steal_context_up(unsigned int id)
 
 	pr_debug("[%d] steal context %d from mm @%p\n", cpu, id, mm);
 
-	/* Mark this mm has having no context anymore */
-	mm->context.id = MMU_NO_CONTEXT;
-
 	/* Flush the TLB for that context */
 	local_flush_tlb_mm(mm);
 
+	/* Mark this mm has having no context anymore */
+	mm->context.id = MMU_NO_CONTEXT;
+
 	/* XXX This clear should ultimately be part of local_flush_tlb_mm */
 	__clear_bit(id, stale_map[cpu]);
 

arch/powerpc/mm/pgtable_32.c

@@ -399,8 +399,6 @@ void kernel_map_pages(struct page *page, int numpages, int enable)
 #endif /* CONFIG_DEBUG_PAGEALLOC */
 
 static int fixmaps;
-unsigned long FIXADDR_TOP = (-PAGE_SIZE);
-EXPORT_SYMBOL(FIXADDR_TOP);
 
 void __set_fixmap (enum fixed_addresses idx, phys_addr_t phys, pgprot_t flags)
 {

arch/powerpc/platforms/maple/pci.c

@@ -592,3 +592,17 @@ int maple_pci_get_legacy_ide_irq(struct pci_dev *pdev, int channel)
 	}
 	return irq;
 }
+
+static void __devinit quirk_ipr_msi(struct pci_dev *dev)
+{
+	/* Something prevents MSIs from the IPR from working on Bimini,
+	 * and the driver has no smarts to recover. So disable MSI
+	 * on it for now. */
+
+	if (machine_is(maple)) {
+		dev->no_msi = 1;
+		dev_info(&dev->dev, "Quirk disabled MSI\n");
+	}
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN,
+			quirk_ipr_msi);

arch/sh/boards/board-ap325rxa.c

@@ -263,6 +263,9 @@ static int camera_probe(void)
 	struct i2c_msg msg;
 	int ret;
 
+	if (!a)
+		return -ENODEV;
+
 	camera_power(1);
 	msg.addr = 0x6e;
 	msg.buf = camera_ncm03j_magic;

arch/sh/include/asm/flat.h

@@ -12,7 +12,6 @@
 #ifndef __ASM_SH_FLAT_H
 #define __ASM_SH_FLAT_H
 
-#define	flat_stack_align(sp)			/* nothing needed */
 #define	flat_argvp_envp_on_stack()		0
 #define	flat_old_ram_flag(flags)		(flags)
 #define	flat_reloc_valid(reloc, size)		((reloc) <= (size))

arch/sparc/include/asm/elf_64.h

@@ -208,8 +208,9 @@ do {	unsigned long new_flags = current_thread_info()->flags; \
 	else						\
 		clear_thread_flag(TIF_ABI_PENDING);	\
 	/* flush_thread will update pgd cache */	\
-	if (current->personality != PER_LINUX32)	\
-		set_personality(PER_LINUX);		\
+	if (personality(current->personality) != PER_LINUX32)	\
+		set_personality(PER_LINUX |		\
+			(current->personality & (~PER_MASK)));	\
 } while (0)
 
 #endif /* !(__ASM_SPARC64_ELF_H) */

arch/sparc/lib/csum_copy_from_user.S

@@ -5,7 +5,7 @@
 
 #define EX_LD(x)		\
 98:	x;			\
-	.section .fixup;	\
+	.section .fixup, "ax";	\
 	.align 4;		\
 99:	retl;			\
 	 mov	-1, %o0;	\

arch/sparc/lib/csum_copy_to_user.S

@@ -5,7 +5,7 @@
 
 #define EX_ST(x)		\
 98:	x;			\
-	.section .fixup;	\
+	.section .fixup,"ax";	\
 	.align 4;		\
 99:	retl;			\
 	 mov	-1, %o0;	\

arch/x86/boot/compressed/relocs.c

@@ -504,8 +504,11 @@ static void walk_relocs(void (*visit)(Elf32_Rel *rel, Elf32_Sym *sym))
 			if (sym->st_shndx == SHN_ABS) {
 				continue;
 			}
-			if (r_type == R_386_PC32) {
-				/* PC relative relocations don't need to be adjusted */
+			if (r_type == R_386_NONE || r_type == R_386_PC32) {
+				/*
+				 * NONE can be ignored and and PC relative
+				 * relocations don't need to be adjusted.
+				 */
 			}
 			else if (r_type == R_386_32) {
 				/* Visit relocations that need to be adjusted */

arch/x86/boot/memory.c

@@ -17,11 +17,6 @@
 
 #define SMAP	0x534d4150	/* ASCII "SMAP" */
 
-struct e820_ext_entry {
-	struct e820entry std;
-	u32 ext_flags;
-} __attribute__((packed));
-
 static int detect_memory_e820(void)
 {
 	int count = 0;
@@ -29,13 +24,21 @@ static int detect_memory_e820(void)
 	u32 size, id, edi;
 	u8 err;
 	struct e820entry *desc = boot_params.e820_map;
-	static struct e820_ext_entry buf; /* static so it is zeroed */
+	static struct e820entry buf; /* static so it is zeroed */
 
 	/*
-	 * Set this here so that if the BIOS doesn't change this field
-	 * but still doesn't change %ecx, we're still okay...
+	 * Note: at least one BIOS is known which assumes that the
+	 * buffer pointed to by one e820 call is the same one as
+	 * the previous call, and only changes modified fields.  Therefore,
+	 * we use a temporary buffer and copy the results entry by entry.
+	 *
+	 * This routine deliberately does not try to account for
+	 * ACPI 3+ extended attributes.  This is because there are
+	 * BIOSes in the field which report zero for the valid bit for
+	 * all ranges, and we don't currently make any use of the
+	 * other attribute bits.  Revisit this if we see the extended
+	 * attribute bits deployed in a meaningful way in the future.
 	 */
-	buf.ext_flags = 1;
 
 	do {
 		size = sizeof buf;
@@ -66,13 +69,7 @@ static int detect_memory_e820(void)
 			break;
 		}
 
-		/* ACPI 3.0 added the extended flags support.  If bit 0
-		   in the extended flags is zero, we're supposed to simply
-		   ignore the entry -- a backwards incompatible change! */
-		if (size > 20 && !(buf.ext_flags & 1))
-			continue;
-
-		*desc++ = buf.std;
+		*desc++ = buf;
 		count++;
 	} while (next && count < ARRAY_SIZE(boot_params.e820_map));
 

arch/x86/kernel/cpu/common.c

@@ -114,6 +114,13 @@ DEFINE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page) = { .gdt = {
 } };
 EXPORT_PER_CPU_SYMBOL_GPL(gdt_page);
 
+static int __init x86_xsave_setup(char *s)
+{
+	setup_clear_cpu_cap(X86_FEATURE_XSAVE);
+	return 1;
+}
+__setup("noxsave", x86_xsave_setup);
+
 #ifdef CONFIG_X86_32
 static int cachesize_override __cpuinitdata = -1;
 static int disable_x86_serial_nr __cpuinitdata = 1;

arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c

@@ -693,8 +693,8 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	if (perf->control_register.space_id == ACPI_ADR_SPACE_FIXED_HARDWARE &&
 	    policy->cpuinfo.transition_latency > 20 * 1000) {
 		policy->cpuinfo.transition_latency = 20 * 1000;
-			printk_once(KERN_INFO "Capping off P-state tranision"
-				    " latency at 20 uS\n");
+		printk_once(KERN_INFO
+			    "P-state transition latency capped at 20 uS\n");
 	}
 
 	/* table init */

arch/x86/kernel/cpu/cpufreq/p4-clockmod.c

@@ -168,6 +168,7 @@ static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c)
 		case 0x0E: /* Core */
 		case 0x0F: /* Core Duo */
 		case 0x16: /* Celeron Core */
+		case 0x1C: /* Atom */
 			p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
 			return speedstep_get_frequency(SPEEDSTEP_CPU_PCORE);
 		case 0x0D: /* Pentium M (Dothan) */

arch/x86/kernel/cpu/cpufreq/powernow-k7.c

@@ -168,10 +168,12 @@ static int check_powernow(void)
 	return 1;
 }
 
+#ifdef CONFIG_X86_POWERNOW_K7_ACPI
 static void invalidate_entry(unsigned int entry)
 {
 	powernow_table[entry].frequency = CPUFREQ_ENTRY_INVALID;
 }
+#endif
 
 static int get_ranges(unsigned char *pst)
 {

arch/x86/kernel/cpu/cpufreq/powernow-k8.c

@@ -649,6 +649,20 @@ static void print_basics(struct powernow_k8_data *data)
 				data->batps);
 }
 
+static u32 freq_from_fid_did(u32 fid, u32 did)
+{
+	u32 mhz = 0;
+
+	if (boot_cpu_data.x86 == 0x10)
+		mhz = (100 * (fid + 0x10)) >> did;
+	else if (boot_cpu_data.x86 == 0x11)
+		mhz = (100 * (fid + 8)) >> did;
+	else
+		BUG();
+
+	return mhz * 1000;
+}
+
 static int fill_powernow_table(struct powernow_k8_data *data,
 		struct pst_s *pst, u8 maxvid)
 {
@@ -821,7 +835,7 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
 {
 	struct cpufreq_frequency_table *powernow_table;
 	int ret_val = -ENODEV;
-	acpi_integer space_id;
+	acpi_integer control, status;
 
 	if (acpi_processor_register_performance(&data->acpi_data, data->cpu)) {
 		dprintk("register performance failed: bad ACPI data\n");
@@ -834,12 +848,13 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
 		goto err_out;
 	}
 
-	space_id = data->acpi_data.control_register.space_id;
-	if ((space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) ||
-		(space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) {
+	control = data->acpi_data.control_register.space_id;
+	status = data->acpi_data.status_register.space_id;
+
+	if ((control != ACPI_ADR_SPACE_FIXED_HARDWARE) ||
+	    (status != ACPI_ADR_SPACE_FIXED_HARDWARE)) {
 		dprintk("Invalid control/status registers (%x - %x)\n",
-			data->acpi_data.control_register.space_id,
-			space_id);
+			control, status);
 		goto err_out;
 	}
 
@@ -923,8 +938,13 @@ static int fill_powernow_table_pstate(struct powernow_k8_data *data,
 
 		powernow_table[i].index = index;
 
-		powernow_table[i].frequency =
-			data->acpi_data.states[i].core_frequency * 1000;
+		/* Frequency may be rounded for these */
+		if (boot_cpu_data.x86 == 0x10 || boot_cpu_data.x86 == 0x11) {
+			powernow_table[i].frequency =
+				freq_from_fid_did(lo & 0x3f, (lo >> 6) & 7);
+		} else
+			powernow_table[i].frequency =
+				data->acpi_data.states[i].core_frequency * 1000;
 	}
 	return 0;
 }
@@ -1215,13 +1235,16 @@ static int powernowk8_verify(struct cpufreq_policy *pol)
 	return cpufreq_frequency_table_verify(pol, data->powernow_table);
 }
 
+static const char ACPI_PSS_BIOS_BUG_MSG[] =
+	KERN_ERR FW_BUG PFX "No compatible ACPI _PSS objects found.\n"
+	KERN_ERR FW_BUG PFX "Try again with latest BIOS.\n";
+
 /* per CPU init entry point to the driver */
 static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 {
 	struct powernow_k8_data *data;
 	cpumask_t oldmask;
 	int rc;
-	static int print_once;
 
 	if (!cpu_online(pol->cpu))
 		return -ENODEV;
@@ -1244,19 +1267,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 		 * an UP version, and is deprecated by AMD.
 		 */
 		if (num_online_cpus() != 1) {
-			/*
-			 * Replace this one with print_once as soon as such a
-			 * thing gets introduced
-			 */
-			if (!print_once) {
-				WARN_ONCE(1, KERN_ERR FW_BUG PFX "Your BIOS "
-					"does not provide ACPI _PSS objects "
-					"in a way that Linux understands. "
-					"Please report this to the Linux ACPI"
-					" maintainers and complain to your "
-					"BIOS vendor.\n");
-				print_once++;
-			}
+			printk_once(ACPI_PSS_BIOS_BUG_MSG);
 			goto err_out;
 		}
 		if (pol->cpu != 0) {

arch/x86/kernel/reboot.c

@@ -232,6 +232,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Dell DXP061"),
 		},
 	},
+	{	/* Handle problems with rebooting on Sony VGN-Z540N */
+		.callback = set_bios_reboot,
+		.ident = "Sony VGN-Z540N",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "VGN-Z540N"),
+		},
+	},
 	{ }
 };
 

arch/x86/kernel/setup_percpu.c

@@ -160,8 +160,10 @@ static ssize_t __init setup_pcpu_remap(size_t static_size)
 	/*
 	 * If large page isn't supported, there's no benefit in doing
 	 * this.  Also, on non-NUMA, embedding is better.
+	 *
+	 * NOTE: disabled for now.
 	 */
-	if (!cpu_has_pse || !pcpu_need_numa())
+	if (true || !cpu_has_pse || !pcpu_need_numa())
 		return -EINVAL;
 
 	/*

arch/x86/kvm/mmu.c

@@ -2897,8 +2897,7 @@ static int kvm_pv_mmu_write(struct kvm_vcpu *vcpu,
 
 static int kvm_pv_mmu_flush_tlb(struct kvm_vcpu *vcpu)
 {
-	kvm_x86_ops->tlb_flush(vcpu);
-	set_bit(KVM_REQ_MMU_SYNC, &vcpu->requests);
+	kvm_set_cr3(vcpu, vcpu->arch.cr3);
 	return 1;
 }
 

arch/x86/kvm/x86.c

@@ -338,6 +338,9 @@ EXPORT_SYMBOL_GPL(kvm_lmsw);
 
 void kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
 {
+	unsigned long old_cr4 = vcpu->arch.cr4;
+	unsigned long pdptr_bits = X86_CR4_PGE | X86_CR4_PSE | X86_CR4_PAE;
+
 	if (cr4 & CR4_RESERVED_BITS) {
 		printk(KERN_DEBUG "set_cr4: #GP, reserved bits\n");
 		kvm_inject_gp(vcpu, 0);
@@ -351,7 +354,8 @@ void kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
 			kvm_inject_gp(vcpu, 0);
 			return;
 		}
-	} else if (is_paging(vcpu) && !is_pae(vcpu) && (cr4 & X86_CR4_PAE)
+	} else if (is_paging(vcpu) && (cr4 & X86_CR4_PAE)
+		   && ((cr4 ^ old_cr4) & pdptr_bits)
 		   && !load_pdptrs(vcpu, vcpu->arch.cr3)) {
 		printk(KERN_DEBUG "set_cr4: #GP, pdptrs reserved bits\n");
 		kvm_inject_gp(vcpu, 0);

arch/x86/lguest/Makefile

@@ -1 +1,2 @@
 obj-y		:= i386_head.o boot.o
+CFLAGS_boot.o	:= $(call cc-option, -fno-stack-protector)

arch/x86/lguest/boot.c

@@ -67,6 +67,7 @@
 #include <asm/mce.h>
 #include <asm/io.h>
 #include <asm/i387.h>
+#include <asm/stackprotector.h>
 #include <asm/reboot.h>		/* for struct machine_ops */
 
 /*G:010 Welcome to the Guest!
@@ -1088,13 +1089,21 @@ __init void lguest_init(void)
 	 * lguest_init() where the rest of the fairly chaotic boot setup
 	 * occurs. */
 
+	/* The stack protector is a weird thing where gcc places a canary
+	 * value on the stack and then checks it on return.  This file is
+	 * compiled with -fno-stack-protector it, so we got this far without
+	 * problems.  The value of the canary is kept at offset 20 from the
+	 * %gs register, so we need to set that up before calling C functions
+	 * in other files. */
+	setup_stack_canary_segment(0);
+	/* We could just call load_stack_canary_segment(), but we might as
+	 * call switch_to_new_gdt() which loads the whole table and sets up
+	 * the per-cpu segment descriptor register %fs as well. */
+	switch_to_new_gdt(0);
+
 	/* As described in head_32.S, we map the first 128M of memory. */
 	max_pfn_mapped = (128*1024*1024) >> PAGE_SHIFT;
 
-	/* Load the %fs segment register (the per-cpu segment register) with
-	 * the normal data segment to get through booting. */
-	asm volatile ("mov %0, %%fs" : : "r" (__KERNEL_DS) : "memory");
-
 	/* The Host<->Guest Switcher lives at the top of our address space, and
 	 * the Host told us how big it is when we made LGUEST_INIT hypercall:
 	 * it put the answer in lguest_data.reserve_mem  */

arch/x86/mm/hugetlbpage.c

@@ -26,12 +26,16 @@ static unsigned long page_table_shareable(struct vm_area_struct *svma,
 	unsigned long sbase = saddr & PUD_MASK;
 	unsigned long s_end = sbase + PUD_SIZE;
 
+	/* Allow segments to share if only one is marked locked */
+	unsigned long vm_flags = vma->vm_flags & ~VM_LOCKED;
+	unsigned long svm_flags = svma->vm_flags & ~VM_LOCKED;
+
 	/*
 	 * match the virtual addresses, permission and the alignment of the
 	 * page table page.
 	 */
 	if (pmd_index(addr) != pmd_index(saddr) ||
-	    vma->vm_flags != svma->vm_flags ||
+	    vm_flags != svm_flags ||
 	    sbase < svma->vm_start || svma->vm_end < s_end)
 		return 0;
 

arch/x86/mm/pageattr.c

@@ -153,7 +153,7 @@ static void __cpa_flush_all(void *arg)
 	 */
 	__flush_tlb_all();
 
-	if (cache && boot_cpu_data.x86_model >= 4)
+	if (cache && boot_cpu_data.x86 >= 4)
 		wbinvd();
 }
 
@@ -208,20 +208,15 @@ static void cpa_flush_array(unsigned long *start, int numpages, int cache,
 			    int in_flags, struct page **pages)
 {
 	unsigned int i, level;
+	unsigned long do_wbinvd = cache && numpages >= 1024; /* 4M threshold */
 
 	BUG_ON(irqs_disabled());
 
-	on_each_cpu(__cpa_flush_range, NULL, 1);
+	on_each_cpu(__cpa_flush_all, (void *) do_wbinvd, 1);
 
-	if (!cache)
+	if (!cache || do_wbinvd)
 		return;
 
-	/* 4M threshold */
-	if (numpages >= 1024) {
-		if (boot_cpu_data.x86_model >= 4)
-			wbinvd();
-		return;
-	}
 	/*
 	 * We only need to flush on one CPU,
 	 * clflush is a MESI-coherent instruction that

arch/x86/pci/mmconfig-shared.c

@@ -375,7 +375,7 @@ static acpi_status __init check_mcfg_resource(struct acpi_resource *res,
 		if (!fixmem32)
 			return AE_OK;
 		if ((mcfg_res->start >= fixmem32->address) &&
-		    (mcfg_res->end <= (fixmem32->address +
+		    (mcfg_res->end < (fixmem32->address +
 				      fixmem32->address_length))) {
 			mcfg_res->flags = 1;
 			return AE_CTRL_TERMINATE;
@@ -392,7 +392,7 @@ static acpi_status __init check_mcfg_resource(struct acpi_resource *res,
 		return AE_OK;
 
 	if ((mcfg_res->start >= address.minimum) &&
-	    (mcfg_res->end <= (address.minimum + address.address_length))) {
+	    (mcfg_res->end < (address.minimum + address.address_length))) {
 		mcfg_res->flags = 1;
 		return AE_CTRL_TERMINATE;
 	}
@@ -418,7 +418,7 @@ static int __init is_acpi_reserved(u64 start, u64 end, unsigned not_used)
 	struct resource mcfg_res;
 
 	mcfg_res.start = start;
-	mcfg_res.end = end;
+	mcfg_res.end = end - 1;
 	mcfg_res.flags = 0;
 
 	acpi_get_devices("PNP0C01", find_mboard_resource, &mcfg_res, NULL);

crypto/ahash.c

@@ -82,10 +82,11 @@ int crypto_hash_walk_done(struct crypto_hash_walk *walk, int err)
 	if (err)
 		return err;
 
-	walk->offset = 0;
-
-	if (nbytes)
+	if (nbytes) {
+		walk->offset = 0;
+		walk->pg++;
 		return hash_walk_next(walk);
+	}
 
 	if (!walk->total)
 		return 0;