usb: dwc3: get rid of ->prepare()/->complete()

Using ->prepare()/->complete() to mask/unmask
IRQs is wrong at least for dwc3. We need to
make sure that by the end of ->resume(), IRQs
are working and ready to fire because a child
device may need working IRQs for its own ->resume()
method.

Signed-off-by: Felipe Balbi <balbi@ti.com>

drivers/usb/dwc3/core.c

@@ -825,50 +825,6 @@ static int dwc3_remove(struct platform_device *pdev)
 }
 
 #ifdef CONFIG_PM_SLEEP
-static int dwc3_prepare(struct device *dev)
-{
-	struct dwc3	*dwc = dev_get_drvdata(dev);
-	unsigned long	flags;
-
-	spin_lock_irqsave(&dwc->lock, flags);
-
-	switch (dwc->dr_mode) {
-	case USB_DR_MODE_PERIPHERAL:
-	case USB_DR_MODE_OTG:
-		dwc3_gadget_prepare(dwc);
-		/* FALLTHROUGH */
-	case USB_DR_MODE_HOST:
-	default:
-		dwc3_event_buffers_cleanup(dwc);
-		break;
-	}
-
-	spin_unlock_irqrestore(&dwc->lock, flags);
-
-	return 0;
-}
-
-static void dwc3_complete(struct device *dev)
-{
-	struct dwc3	*dwc = dev_get_drvdata(dev);
-	unsigned long	flags;
-
-	spin_lock_irqsave(&dwc->lock, flags);
-
-	dwc3_event_buffers_setup(dwc);
-	switch (dwc->dr_mode) {
-	case USB_DR_MODE_PERIPHERAL:
-	case USB_DR_MODE_OTG:
-		dwc3_gadget_complete(dwc);
-		/* FALLTHROUGH */
-	case USB_DR_MODE_HOST:
-	default:
-		break;
-	}
-
-	spin_unlock_irqrestore(&dwc->lock, flags);
-}
-
 static int dwc3_suspend(struct device *dev)
 {
 	struct dwc3	*dwc = dev_get_drvdata(dev);
@@ -883,7 +839,7 @@ static int dwc3_suspend(struct device *dev)
 		/* FALLTHROUGH */
 	case USB_DR_MODE_HOST:
 	default:
-		/* do nothing */
+		dwc3_event_buffers_cleanup(dwc);
 		break;
 	}
 
@@ -916,6 +872,7 @@ static int dwc3_resume(struct device *dev)
 
 	spin_lock_irqsave(&dwc->lock, flags);
 
+	dwc3_event_buffers_setup(dwc);
 	dwc3_writel(dwc->regs, DWC3_GCTL, dwc->gctl);
 
 	switch (dwc->dr_mode) {
@@ -944,9 +901,6 @@ err_usb2phy_init:
 }
 
 static const struct dev_pm_ops dwc3_dev_pm_ops = {
-	.prepare	= dwc3_prepare,
-	.complete	= dwc3_complete,
-
 	SET_SYSTEM_SLEEP_PM_OPS(dwc3_suspend, dwc3_resume)
 };
 

drivers/usb/dwc3/core.h

@@ -964,20 +964,9 @@ static inline int dwc3_send_gadget_generic_command(struct dwc3 *dwc,
 
 /* power management interface */
 #if !IS_ENABLED(CONFIG_USB_DWC3_HOST)
-int dwc3_gadget_prepare(struct dwc3 *dwc);
-void dwc3_gadget_complete(struct dwc3 *dwc);
 int dwc3_gadget_suspend(struct dwc3 *dwc);
 int dwc3_gadget_resume(struct dwc3 *dwc);
 #else
-static inline int dwc3_gadget_prepare(struct dwc3 *dwc)
-{
-	return 0;
-}
-
-static inline void dwc3_gadget_complete(struct dwc3 *dwc)
-{
-}
-
 static inline int dwc3_gadget_suspend(struct dwc3 *dwc)
 {
 	return 0;

drivers/usb/dwc3/gadget.c

@@ -2744,26 +2744,13 @@ void dwc3_gadget_exit(struct dwc3 *dwc)
 			dwc->ctrl_req, dwc->ctrl_req_addr);
 }
 
-int dwc3_gadget_prepare(struct dwc3 *dwc)
+int dwc3_gadget_suspend(struct dwc3 *dwc)
 {
 	if (dwc->pullups_connected) {
 		dwc3_gadget_disable_irq(dwc);
 		dwc3_gadget_run_stop(dwc, true, true);
 	}
 
-	return 0;
-}
-
-void dwc3_gadget_complete(struct dwc3 *dwc)
-{
-	if (dwc->pullups_connected) {
-		dwc3_gadget_enable_irq(dwc);
-		dwc3_gadget_run_stop(dwc, true, false);
-	}
-}
-
-int dwc3_gadget_suspend(struct dwc3 *dwc)
-{
 	__dwc3_gadget_ep_disable(dwc->eps[0]);
 	__dwc3_gadget_ep_disable(dwc->eps[1]);
 
@@ -2798,6 +2785,11 @@ int dwc3_gadget_resume(struct dwc3 *dwc)
 
 	dwc3_writel(dwc->regs, DWC3_DCFG, dwc->dcfg);
 
+	if (dwc->pullups_connected) {
+		dwc3_gadget_enable_irq(dwc);
+		dwc3_gadget_run_stop(dwc, true, false);
+	}
+
 	return 0;
 
 err1: