Merge tag 'arm-soc/for-4.7/devicetree-arm64' of http://github.com/Broadcom/stblinux into next/dt64

Pull "Broadcom ARM64-based SoC Device Tree changes" from Florian Fainelli:

- Anup enables a bunch of standard peripherals in the Northstar 2 DTS: PL330
  DMA, GIC maintenance interrupt, PL022 SPI controller

- Anup also re-orgnanizes the clock Device Tree fragments into a separate file
  for consistency with how other Broadcom SoCs are doing this

- Luke switches the SMP enable-method and reboot from a spin-table + syscon to
  the standard PSCI 1.0 firmware interface

* tag 'arm-soc/for-4.7/devicetree-arm64' of http://github.com/Broadcom/stblinux:
  arm64: dts: NS2 secondary core enablement via PSCI
  arm64: dts: Add ARM PL022 SPI DT nodes for NS2
  arm64: dts: Move NS2 clock DT nodes to separate DT file
  arm64: dts: Add maintenance interrupt for GIC in NS2 DT
  arm64: dts: Add ARM PL330 DMA DT node for NS2

arch/arm64/boot/dts/broadcom/ns2-clock.dtsi

@@ -0,0 +1,105 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright (c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/clock/bcm-ns2.h>
+
+	osc: oscillator {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <25000000>;
+	};
+
+	lcpll_ddr: lcpll_ddr@6501d058 {
+		#clock-cells = <1>;
+		compatible = "brcm,ns2-lcpll-ddr";
+		reg = <0x6501d058 0x20>,
+		      <0x6501c020 0x4>,
+		      <0x6501d04c 0x4>;
+		clocks = <&osc>;
+		clock-output-names = "lcpll_ddr", "pcie_sata_usb",
+				     "ddr", "ddr_ch2_unused",
+				     "ddr_ch3_unused", "ddr_ch4_unused",
+				     "ddr_ch5_unused";
+	};
+
+	lcpll_ports: lcpll_ports@6501d078 {
+		#clock-cells = <1>;
+		compatible = "brcm,ns2-lcpll-ports";
+		reg = <0x6501d078 0x20>,
+		      <0x6501c020 0x4>,
+		      <0x6501d054 0x4>;
+		clocks = <&osc>;
+		clock-output-names = "lcpll_ports", "wan", "rgmii",
+				     "ports_ch2_unused",
+				     "ports_ch3_unused",
+				     "ports_ch4_unused",
+				     "ports_ch5_unused";
+	};
+
+	genpll_scr: genpll_scr@6501d098 {
+		#clock-cells = <1>;
+		compatible = "brcm,ns2-genpll-scr";
+		reg = <0x6501d098 0x32>,
+		      <0x6501c020 0x4>,
+		      <0x6501d044 0x4>;
+		clocks = <&osc>;
+		clock-output-names = "genpll_scr", "scr", "fs",
+				     "audio_ref", "scr_ch3_unused",
+				     "scr_ch4_unused", "scr_ch5_unused";
+	};
+
+	iprocmed: iprocmed {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>;
+		clock-div = <2>;
+		clock-mult = <1>;
+	};
+
+	iprocslow: iprocslow {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>;
+		clock-div = <4>;
+		clock-mult = <1>;
+	};
+
+	genpll_sw: genpll_sw@6501d0c4 {
+		#clock-cells = <1>;
+		compatible = "brcm,ns2-genpll-sw";
+		reg = <0x6501d0c4 0x32>,
+		      <0x6501c020 0x4>,
+		      <0x6501d044 0x4>;
+		clocks = <&osc>;
+		clock-output-names = "genpll_sw", "rpe", "250", "nic",
+				     "chimp", "port", "sdio";
+	};

arch/arm64/boot/dts/broadcom/ns2-svk.dts

@@ -72,6 +72,51 @@
 	status = "ok";
 };
 
+&ssp0 {
+	status = "ok";
+
+	slic@0 {
+		compatible = "silabs,si3226x";
+		reg = <0>;
+		spi-max-frequency = <5000000>;
+		spi-cpha = <1>;
+		spi-cpol = <1>;
+		pl022,hierarchy = <0>;
+		pl022,interface = <0>;
+		pl022,slave-tx-disable = <0>;
+		pl022,com-mode = <0>;
+		pl022,rx-level-trig = <1>;
+		pl022,tx-level-trig = <1>;
+		pl022,ctrl-len = <11>;
+		pl022,wait-state = <0>;
+		pl022,duplex = <0>;
+	};
+};
+
+&ssp1 {
+	status = "ok";
+
+	at25@0 {
+		compatible = "atmel,at25";
+		reg = <0>;
+		spi-max-frequency = <5000000>;
+		at25,byte-len = <0x8000>;
+		at25,addr-mode = <2>;
+		at25,page-size = <64>;
+		spi-cpha = <1>;
+		spi-cpol = <1>;
+		pl022,hierarchy = <0>;
+		pl022,interface = <0>;
+		pl022,slave-tx-disable = <0>;
+		pl022,com-mode = <0>;
+		pl022,rx-level-trig = <1>;
+		pl022,tx-level-trig = <1>;
+		pl022,ctrl-len = <11>;
+		pl022,wait-state = <0>;
+		pl022,duplex = <0>;
+	};
+};
+
 &sdio0 {
 	status = "ok";
 };

arch/arm64/boot/dts/broadcom/ns2.dtsi

@@ -1,7 +1,7 @@
 /*
  *  BSD LICENSE
  *
- *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
+ *  Copyright (c) 2015 Broadcom.  All rights reserved.
  *
  *  Redistribution and use in source and binary forms, with or without
  *  modification, are permitted provided that the following conditions
@@ -33,8 +33,6 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/bcm-ns2.h>
 
-/memreserve/ 0x84b00000 0x00000008;
-
 / {
 	compatible = "brcm,ns2";
 	interrupt-parent = <&gic>;
@@ -49,8 +47,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0 0>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0 0x84b00000>;
+			enable-method = "psci";
 			next-level-cache = <&CLUSTER0_L2>;
 		};
 
@@ -58,8 +55,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0 1>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0 0x84b00000>;
+			enable-method = "psci";
 			next-level-cache = <&CLUSTER0_L2>;
 		};
 
@@ -67,8 +63,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0 2>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0 0x84b00000>;
+			enable-method = "psci";
 			next-level-cache = <&CLUSTER0_L2>;
 		};
 
@@ -76,8 +71,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0 3>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0 0x84b00000>;
+			enable-method = "psci";
 			next-level-cache = <&CLUSTER0_L2>;
 		};
 
@@ -86,6 +80,11 @@
 		};
 	};
 
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0xff) |
@@ -110,33 +109,6 @@
 				     <&A57_3>;
 	};
 
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		osc: oscillator {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <25000000>;
-		};
-
-		iprocmed: iprocmed {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>;
-			clock-div = <2>;
-			clock-mult = <1>;
-		};
-
-		iprocslow: iprocslow {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>;
-			clock-div = <4>;
-			clock-mult = <1>;
-		};
-	};
-
 	pcie0: pcie@20020000 {
 		compatible = "brcm,iproc-pcie";
 		reg = <0 0x20020000 0 0x1000>;
@@ -217,6 +189,27 @@
 		#size-cells = <1>;
 		ranges = <0 0 0 0xffffffff>;
 
+		#include "ns2-clock.dtsi"
+
+		dma0: dma@61360000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x61360000 0x1000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+			clocks = <&iprocslow>;
+			clock-names = "apb_pclk";
+		};
+
 		smmu: mmu@64000000 {
 			compatible = "arm,mmu-500";
 			reg = <0x64000000 0x40000>;
@@ -258,68 +251,6 @@
 			mmu-masters;
 		};
 
-		lcpll_ddr: lcpll_ddr@6501d058 {
-			#clock-cells = <1>;
-			compatible = "brcm,ns2-lcpll-ddr";
-			reg = <0x6501d058 0x20>,
-			      <0x6501c020 0x4>,
-			      <0x6501d04c 0x4>;
-			clocks = <&osc>;
-			clock-output-names = "lcpll_ddr", "pcie_sata_usb",
-					     "ddr", "ddr_ch2_unused",
-					     "ddr_ch3_unused", "ddr_ch4_unused",
-					     "ddr_ch5_unused";
-		};
-
-		lcpll_ports: lcpll_ports@6501d078 {
-			#clock-cells = <1>;
-			compatible = "brcm,ns2-lcpll-ports";
-			reg = <0x6501d078 0x20>,
-			      <0x6501c020 0x4>,
-			      <0x6501d054 0x4>;
-			clocks = <&osc>;
-			clock-output-names = "lcpll_ports", "wan", "rgmii",
-					     "ports_ch2_unused",
-					     "ports_ch3_unused",
-					     "ports_ch4_unused",
-					     "ports_ch5_unused";
-		};
-
-		genpll_scr: genpll_scr@6501d098 {
-			#clock-cells = <1>;
-			compatible = "brcm,ns2-genpll-scr";
-			reg = <0x6501d098 0x32>,
-			      <0x6501c020 0x4>,
-			      <0x6501d044 0x4>;
-			clocks = <&osc>;
-			clock-output-names = "genpll_scr", "scr", "fs",
-					     "audio_ref", "scr_ch3_unused",
-					     "scr_ch4_unused", "scr_ch5_unused";
-		};
-
-		genpll_sw: genpll_sw@6501d0c4 {
-			#clock-cells = <1>;
-			compatible = "brcm,ns2-genpll-sw";
-			reg = <0x6501d0c4 0x32>,
-			      <0x6501c020 0x4>,
-			      <0x6501d044 0x4>;
-			clocks = <&osc>;
-			clock-output-names = "genpll_sw", "rpe", "250", "nic",
-					     "chimp", "port", "sdio";
-		};
-
-		crmu: crmu@65024000 {
-			compatible = "syscon";
-			reg = <0x65024000 0x100>;
-		};
-
-		reboot@65024000 {
-			compatible ="syscon-reboot";
-			regmap = <&crmu>;
-			offset = <0x90>;
-			mask = <0xfffffffd>;
-		};
-
 		gic: interrupt-controller@65210000 {
 			compatible = "arm,gic-400";
 			#interrupt-cells = <3>;
@@ -328,6 +259,8 @@
 			      <0x65220000 0x1000>,
 			      <0x65240000 0x2000>,
 			      <0x65260000 0x1000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) |
+				      IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
 		timer0: timer@66030000 {
@@ -408,6 +341,28 @@
 			status = "disabled";
 		};
 
+		ssp0: ssp@66180000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x66180000 0x1000>;
+			interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>, <&iprocslow>;
+			clock-names = "spiclk", "apb_pclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		ssp1: ssp@66190000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x66190000 0x1000>;
+			interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>, <&iprocslow>;
+			clock-names = "spiclk", "apb_pclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		hwrng: hwrng@66220000 {
 			compatible = "brcm,iproc-rng200";
 			reg = <0x66220000 0x28>;