Merge branch 'upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/netdev-2.6

Documentation/cpu-hotplug.txt

@@ -11,6 +11,8 @@
 			Joel Schopp <jschopp@austin.ibm.com>
 		ia64/x86_64:
 			Ashok Raj <ashok.raj@intel.com>
+		s390:
+			Heiko Carstens <heiko.carstens@de.ibm.com>
 
 Authors: Ashok Raj <ashok.raj@intel.com>
 Lots of feedback: Nathan Lynch <nathanl@austin.ibm.com>,
@@ -44,9 +46,28 @@ maxcpus=n    Restrict boot time cpus to n. Say if you have 4 cpus, using
              maxcpus=2 will only boot 2. You can choose to bring the
              other cpus later online, read FAQ's for more info.
 
-additional_cpus=n	[x86_64 only] use this to limit hotpluggable cpus.
-                        This option sets
-			cpu_possible_map = cpu_present_map + additional_cpus
+additional_cpus*=n	Use this to limit hotpluggable cpus. This option sets
+  			cpu_possible_map = cpu_present_map + additional_cpus
+
+(*) Option valid only for following architectures
+- x86_64, ia64, s390
+
+ia64 and x86_64 use the number of disabled local apics in ACPI tables MADT
+to determine the number of potentially hot-pluggable cpus. The implementation
+should only rely on this to count the #of cpus, but *MUST* not rely on the
+apicid values in those tables for disabled apics. In the event BIOS doesnt
+mark such hot-pluggable cpus as disabled entries, one could use this
+parameter "additional_cpus=x" to represent those cpus in the cpu_possible_map.
+
+s390 uses the number of cpus it detects at IPL time to also the number of bits
+in cpu_possible_map. If it is desired to add additional cpus at a later time
+the number should be specified using this option or the possible_cpus option.
+
+possible_cpus=n		[s390 only] use this to set hotpluggable cpus.
+			This option sets possible_cpus bits in
+			cpu_possible_map. Thus keeping the numbers of bits set
+			constant even if the machine gets rebooted.
+			This option overrides additional_cpus.
 
 CPU maps and such
 -----------------

Documentation/feature-removal-schedule.txt

@@ -178,3 +178,12 @@ Why:	The ISA interface is faster and should be always available. The I2C
 	probing is also known to cause trouble in at least one case (see
 	bug #5889.)
 Who:	Jean Delvare <khali@linux-fr.org>
+
+---------------------------
+
+What:	mount/umount uevents
+When:	February 2007
+Why:	These events are not correct, and do not properly let userspace know
+	when a file system has been mounted or unmounted.  Userspace should
+	poll the /proc/mounts file instead to detect this properly.
+Who:	Greg Kroah-Hartman <gregkh@suse.de>

Documentation/filesystems/ntfs.txt

@@ -457,6 +457,12 @@ ChangeLog
 
 Note, a technical ChangeLog aimed at kernel hackers is in fs/ntfs/ChangeLog.
 
+2.1.26:
+	- Implement support for sector sizes above 512 bytes (up to the maximum
+	  supported by NTFS which is 4096 bytes).
+	- Enhance support for NTFS volumes which were supported by Windows but
+	  not by Linux due to invalid attribute list attribute flags.
+	- A few minor updates and bug fixes.
 2.1.25:
 	- Write support is now extended with write(2) being able to both
 	  overwrite existing file data and to extend files.  Also, if a write

Documentation/filesystems/tmpfs.txt

@@ -79,15 +79,27 @@ that instance in a system with many cpus making intensive use of it.
 
 
 tmpfs has a mount option to set the NUMA memory allocation policy for
-all files in that instance:
-mpol=interleave		prefers to allocate memory from each node in turn
-mpol=default		prefers to allocate memory from the local node
-mpol=bind		prefers to allocate from mpol_nodelist
-mpol=preferred		prefers to allocate from first node in mpol_nodelist
+all files in that instance (if CONFIG_NUMA is enabled) - which can be
+adjusted on the fly via 'mount -o remount ...'
 
-The following mount option is used in conjunction with mpol=interleave,
-mpol=bind or mpol=preferred:
-mpol_nodelist:	nodelist suitable for parsing with nodelist_parse.
+mpol=default             prefers to allocate memory from the local node
+mpol=prefer:Node         prefers to allocate memory from the given Node
+mpol=bind:NodeList       allocates memory only from nodes in NodeList
+mpol=interleave          prefers to allocate from each node in turn
+mpol=interleave:NodeList allocates from each node of NodeList in turn
+
+NodeList format is a comma-separated list of decimal numbers and ranges,
+a range being two hyphen-separated decimal numbers, the smallest and
+largest node numbers in the range.  For example, mpol=bind:0-3,5,7,9-15
+
+Note that trying to mount a tmpfs with an mpol option will fail if the
+running kernel does not support NUMA; and will fail if its nodelist
+specifies a node >= MAX_NUMNODES.  If your system relies on that tmpfs
+being mounted, but from time to time runs a kernel built without NUMA
+capability (perhaps a safe recovery kernel), or configured to support
+fewer nodes, then it is advisable to omit the mpol option from automatic
+mount options.  It can be added later, when the tmpfs is already mounted
+on MountPoint, by 'mount -o remount,mpol=Policy:NodeList MountPoint'.
 
 
 To specify the initial root directory you can use the following mount
@@ -109,4 +121,4 @@ RAM/SWAP in 10240 inodes and it is only accessible by root.
 Author:
    Christoph Rohland <cr@sap.com>, 1.12.01
 Updated:
-   Hugh Dickins <hugh@veritas.com>, 13 March 2005
+   Hugh Dickins <hugh@veritas.com>, 19 February 2006

Documentation/filesystems/v9fs.txt

@@ -57,8 +57,6 @@ OPTIONS
 
   port=n	port to connect to on the remote server
 
-  timeout=n	request timeouts (in ms) (default 60000ms)
-
   noextend	force legacy mode (no 9P2000.u semantics)
 
   uid		attempt to mount as a particular uid
@@ -74,10 +72,16 @@ OPTIONS
 RESOURCES
 =========
 
-The Linux version of the 9P server, along with some client-side utilities
-can be found at http://v9fs.sf.net (along with a CVS repository of the
-development branch of this module).  There are user and developer mailing
-lists here, as well as a bug-tracker.
+The Linux version of the 9P server is now maintained under the npfs project
+on sourceforge (http://sourceforge.net/projects/npfs).
+
+There are user and developer mailing lists available through the v9fs project
+on sourceforge (http://sourceforge.net/projects/v9fs).
+
+News and other information is maintained on SWiK (http://swik.net/v9fs).
+
+Bug reports may be issued through the kernel.org bugzilla 
+(http://bugzilla.kernel.org)
 
 For more information on the Plan 9 Operating System check out
 http://plan9.bell-labs.com/plan9

Documentation/kernel-parameters.txt

@@ -1638,6 +1638,9 @@ running once the system is up.
 			Format:
 			<irq>,<irq_mask>,<io>,<full_duplex>,<do_sound>,<lockup_hack>[,<irq2>[,<irq3>[,<irq4>]]]
 
+	norandmaps	Don't use address space randomization
+			Equivalent to echo 0 > /proc/sys/kernel/randomize_va_space
+
 
 ______________________________________________________________________
 Changelog:

Documentation/sysctl/kernel.txt

@@ -16,6 +16,7 @@ before actually making adjustments.
 
 Currently, these files might (depending on your configuration)
 show up in /proc/sys/kernel:
+- acpi_video_flags
 - acct
 - core_pattern
 - core_uses_pid
@@ -57,6 +58,15 @@ show up in /proc/sys/kernel:
 
 ==============================================================
 
+acpi_video_flags:
+
+flags
+
+See Doc*/kernel/power/video.txt, it allows mode of video boot to be
+set during run time.
+
+==============================================================
+
 acct:
 
 highwater lowwater frequency

Documentation/x86_64/boot-options.txt

@@ -52,6 +52,10 @@ APICs
 		 apicmaintimer. Useful when your PIT timer is totally
 		 broken.
 
+   disable_8254_timer / enable_8254_timer
+		 Enable interrupt 0 timer routing over the 8254 in addition to over
+	         the IO-APIC. The kernel tries to set a sensible default.
+
 Early Console
 
    syntax: earlyprintk=vga

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 16
-EXTRAVERSION =-rc3
+EXTRAVERSION =-rc5
 NAME=Sliding Snow Leopard
 
 # *DOCUMENTATION*

arch/arm/common/rtctime.c

@@ -128,19 +128,27 @@ EXPORT_SYMBOL(rtc_tm_to_time);
 /*
  * Calculate the next alarm time given the requested alarm time mask
  * and the current time.
- *
- * FIXME: for now, we just copy the alarm time because we're lazy (and
- * is therefore buggy - setting a 10am alarm at 8pm will not result in
- * the alarm triggering.)
  */
 void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now, struct rtc_time *alrm)
 {
+	unsigned long next_time;
+	unsigned long now_time;
+
 	next->tm_year = now->tm_year;
 	next->tm_mon = now->tm_mon;
 	next->tm_mday = now->tm_mday;
 	next->tm_hour = alrm->tm_hour;
 	next->tm_min = alrm->tm_min;
 	next->tm_sec = alrm->tm_sec;
+
+	rtc_tm_to_time(now, &now_time);
+	rtc_tm_to_time(next, &next_time);
+
+	if (next_time < now_time) {
+		/* Advance one day */
+		next_time += 60 * 60 * 24;
+		rtc_time_to_tm(next_time, next);
+	}
 }
 
 static inline int rtc_read_time(struct rtc_ops *ops, struct rtc_time *tm)

arch/arm/kernel/calls.S

@@ -111,7 +111,7 @@
 		CALL(sys_statfs)
 /* 100 */	CALL(sys_fstatfs)
 		CALL(sys_ni_syscall)
-		CALL(OBSOLETE(sys_socketcall))
+		CALL(OBSOLETE(ABI(sys_socketcall, sys_oabi_socketcall)))
 		CALL(sys_syslog)
 		CALL(sys_setitimer)
 /* 105 */	CALL(sys_getitimer)

arch/arm/kernel/entry-armv.S

@@ -566,7 +566,7 @@ ENTRY(__switch_to)
 	ldr	r6, [r2, #TI_CPU_DOMAIN]!
 #endif
 #if __LINUX_ARM_ARCH__ >= 6
-#ifdef CONFIG_CPU_MPCORE
+#ifdef CONFIG_CPU_32v6K
 	clrex
 #else
 	strex	r5, r4, [ip]			@ Clear exclusive monitor

arch/arm/kernel/setup.c

@@ -23,6 +23,7 @@
 #include <linux/root_dev.h>
 #include <linux/cpu.h>
 #include <linux/interrupt.h>
+#include <linux/smp.h>
 
 #include <asm/cpu.h>
 #include <asm/elf.h>
@@ -771,6 +772,10 @@ void __init setup_arch(char **cmdline_p)
 	paging_init(&meminfo, mdesc);
 	request_standard_resources(&meminfo, mdesc);
 
+#ifdef CONFIG_SMP
+	smp_init_cpus();
+#endif
+
 	cpu_init();
 
 	/*

arch/arm/kernel/smp.c

@@ -338,7 +338,6 @@ void __init smp_prepare_boot_cpu(void)
 
 	per_cpu(cpu_data, cpu).idle = current;
 
-	cpu_set(cpu, cpu_possible_map);
 	cpu_set(cpu, cpu_present_map);
 	cpu_set(cpu, cpu_online_map);
 }

arch/arm/kernel/sys_oabi-compat.c

@@ -64,6 +64,7 @@
  * sys_connect:
  * sys_sendmsg:
  * sys_sendto:
+ * sys_socketcall:
  *
  *   struct sockaddr_un loses its padding with EABI.  Since the size of the
  *   structure is used as a validation test in unix_mkname(), we need to
@@ -78,6 +79,7 @@
 #include <linux/eventpoll.h>
 #include <linux/sem.h>
 #include <linux/socket.h>
+#include <linux/net.h>
 #include <asm/ipc.h>
 #include <asm/uaccess.h>
 
@@ -408,3 +410,31 @@ asmlinkage long sys_oabi_sendmsg(int fd, struct msghdr __user *msg, unsigned fla
 	return sys_sendmsg(fd, msg, flags);
 }
 
+asmlinkage long sys_oabi_socketcall(int call, unsigned long __user *args)
+{
+	unsigned long r = -EFAULT, a[6];
+
+	switch (call) {
+	case SYS_BIND:
+		if (copy_from_user(a, args, 3 * sizeof(long)) == 0)
+			r = sys_oabi_bind(a[0], (struct sockaddr __user *)a[1], a[2]);
+		break;
+	case SYS_CONNECT:
+		if (copy_from_user(a, args, 3 * sizeof(long)) == 0)
+			r = sys_oabi_connect(a[0], (struct sockaddr __user *)a[1], a[2]);
+		break;
+	case SYS_SENDTO:
+		if (copy_from_user(a, args, 6 * sizeof(long)) == 0)
+			r = sys_oabi_sendto(a[0], (void __user *)a[1], a[2], a[3],
+					    (struct sockaddr __user *)a[4], a[5]);
+		break;
+	case SYS_SENDMSG:
+		if (copy_from_user(a, args, 3 * sizeof(long)) == 0)
+			r = sys_oabi_sendmsg(a[0], (struct msghdr __user *)a[1], a[2]);
+		break;
+	default:
+		r = sys_socketcall(call, args);
+	}
+
+	return r;
+}

arch/arm/kernel/traps.c

@@ -19,6 +19,7 @@
 #include <linux/personality.h>
 #include <linux/ptrace.h>
 #include <linux/kallsyms.h>
+#include <linux/delay.h>
 #include <linux/init.h>
 
 #include <asm/atomic.h>
@@ -231,6 +232,13 @@ NORET_TYPE void die(const char *str, struct pt_regs *regs, int err)
 	__die(str, err, thread, regs);
 	bust_spinlocks(0);
 	spin_unlock_irq(&die_lock);
+
+	if (panic_on_oops) {
+		printk(KERN_EMERG "Fatal exception: panic in 5 seconds\n");
+		ssleep(5);
+		panic("Fatal exception");
+	}
+
 	do_exit(SIGSEGV);
 }
 

arch/arm/mach-at91rm9200/devices.c

@@ -100,8 +100,10 @@ void __init at91_add_device_udc(struct at91_udc_data *data)
 		at91_set_gpio_input(data->vbus_pin, 0);
 		at91_set_deglitch(data->vbus_pin, 1);
 	}
-	if (data->pullup_pin)
+	if (data->pullup_pin) {
 		at91_set_gpio_output(data->pullup_pin, 0);
+		at91_set_multi_drive(data->pullup_pin, 1);
+	}
 
 	udc_data = *data;
 	platform_device_register(&at91rm9200_udc_device);

arch/arm/mach-at91rm9200/gpio.c

@@ -159,6 +159,23 @@ int __init_or_module at91_set_deglitch(unsigned pin, int is_on)
 }
 EXPORT_SYMBOL(at91_set_deglitch);
 
+/*
+ * enable/disable the multi-driver; This is only valid for output and
+ * allows the output pin to run as an open collector output.
+ */
+int __init_or_module at91_set_multi_drive(unsigned pin, int is_on)
+{
+	void __iomem	*pio = pin_to_controller(pin);
+	unsigned	mask = pin_to_mask(pin);
+
+	if (!pio)
+		return -EINVAL;
+
+	__raw_writel(mask, pio + (is_on ? PIO_MDER : PIO_MDDR));
+	return 0;
+}
+EXPORT_SYMBOL(at91_set_multi_drive);
+
 /*--------------------------------------------------------------------------*/
 
 
@@ -257,8 +274,18 @@ static void gpio_irq_handler(unsigned irq, struct irqdesc *desc, struct pt_regs
 		gpio = &irq_desc[pin];
 
 		while (isr) {
-			if (isr & 1)
-				gpio->handle(pin, gpio, regs);
+			if (isr & 1) {
+				if (unlikely(gpio->disable_depth)) {
+					/*
+					 * The core ARM interrupt handler lazily disables IRQs so
+					 * another IRQ must be generated before it actually gets
+					 * here to be disabled on the GPIO controller.
+					 */
+					gpio_irq_mask(pin);
+				}
+				else
+					gpio->handle(pin, gpio, regs);
+			}
 			pin++;
 			gpio++;
 			isr >>= 1;

arch/arm/mach-integrator/platsmp.c

@@ -140,6 +140,18 @@ static void __init poke_milo(void)
 	mb();
 }
 
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+void __init smp_init_cpus(void)
+{
+	unsigned int i, ncores = get_core_count();
+
+	for (i = 0; i < ncores; i++)
+		cpu_set(i, cpu_possible_map);
+}
+
 void __init smp_prepare_cpus(unsigned int max_cpus)
 {
 	unsigned int ncores = get_core_count();
@@ -176,14 +188,11 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 		max_cpus = ncores;
 
 	/*
-	 * Initialise the possible/present maps.
-	 * cpu_possible_map describes the set of CPUs which may be present
-	 * cpu_present_map describes the set of CPUs populated
+	 * Initialise the present map, which describes the set of CPUs
+	 * actually populated at the present time.
 	 */
-	for (i = 0; i < max_cpus; i++) {
-		cpu_set(i, cpu_possible_map);
+	for (i = 0; i < max_cpus; i++)
 		cpu_set(i, cpu_present_map);
-	}
 
 	/*
 	 * Do we need any more CPUs? If so, then let them know where

arch/arm/mach-iop3xx/iop321-setup.c

@@ -13,7 +13,6 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/config.h>
-#include <linux/init.h>
 #include <linux/major.h>
 #include <linux/fs.h>
 #include <linux/platform_device.h>

arch/arm/mach-iop3xx/iop331-setup.c

@@ -12,7 +12,6 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/config.h>
-#include <linux/init.h>
 #include <linux/major.h>
 #include <linux/fs.h>
 #include <linux/platform_device.h>

arch/arm/mach-ixp4xx/common.c

@@ -111,24 +111,30 @@ static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type)
 	if (line < 0)
 		return -EINVAL;
 
-	if (type & IRQT_BOTHEDGE) {
+	switch (type){
+	case IRQT_BOTHEDGE:
 		int_style = IXP4XX_GPIO_STYLE_TRANSITIONAL;
 		irq_type = IXP4XX_IRQ_EDGE;
-	} else  if (type & IRQT_RISING) {
+		break;
+	case IRQT_RISING:
 		int_style = IXP4XX_GPIO_STYLE_RISING_EDGE;
 		irq_type = IXP4XX_IRQ_EDGE;
-	} else if (type & IRQT_FALLING) {
+		break;
+	case IRQT_FALLING:
 		int_style = IXP4XX_GPIO_STYLE_FALLING_EDGE;
 		irq_type = IXP4XX_IRQ_EDGE;
-	} else if (type & IRQT_HIGH) {
+		break;
+	case IRQT_HIGH:
 		int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH;
 		irq_type = IXP4XX_IRQ_LEVEL;
-	} else if (type & IRQT_LOW) {
+		break;
+	case IRQT_LOW:
 		int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW;
 		irq_type = IXP4XX_IRQ_LEVEL;
-	} else
+		break;
+	default:
 		return -EINVAL;
-
+	}
 	ixp4xx_config_irq(irq, irq_type);
 
 	if (line >= 8) {	/* pins 8-15 */

arch/arm/mach-ixp4xx/nslu2-power.c

@@ -77,6 +77,9 @@ static int __init nslu2_power_init(void)
 
 static void __exit nslu2_power_exit(void)
 {
+	if (!(machine_is_nslu2()))
+		return;
+
 	free_irq(NSLU2_RB_IRQ, NULL);
 	free_irq(NSLU2_PB_IRQ, NULL);
 }

arch/arm/mach-ixp4xx/nslu2-setup.c

@@ -27,8 +27,6 @@ static struct flash_platform_data nslu2_flash_data = {
 };
 
 static struct resource nslu2_flash_resource = {
-	.start			= NSLU2_FLASH_BASE,
-	.end			= NSLU2_FLASH_BASE + NSLU2_FLASH_SIZE,
 	.flags			= IORESOURCE_MEM,
 };
 
@@ -52,6 +50,12 @@ static struct platform_device nslu2_i2c_controller = {
 	.num_resources		= 0,
 };
 
+static struct platform_device nslu2_beeper = {
+	.name			= "ixp4xx-beeper",
+	.id			= NSLU2_GPIO_BUZZ,
+	.num_resources		= 0,
+};
+
 static struct resource nslu2_uart_resources[] = {
 	{
 		.start		= IXP4XX_UART1_BASE_PHYS,
@@ -99,6 +103,7 @@ static struct platform_device *nslu2_devices[] __initdata = {
 	&nslu2_i2c_controller,
 	&nslu2_flash,
 	&nslu2_uart,
+	&nslu2_beeper,
 };
 
 static void nslu2_power_off(void)
@@ -116,6 +121,10 @@ static void __init nslu2_init(void)
 {
 	ixp4xx_sys_init();
 
+	nslu2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+	nslu2_flash_resource.end =
+		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
+
 	pm_power_off = nslu2_power_off;
 
 	platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices));

arch/arm/mach-realview/platsmp.c

@@ -143,6 +143,18 @@ static void __init poke_milo(void)
 	mb();
 }
 
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+void __init smp_init_cpus(void)
+{
+	unsigned int i, ncores = get_core_count();
+
+	for (i = 0; i < ncores; i++)
+		cpu_set(i, cpu_possible_map);
+}
+
 void __init smp_prepare_cpus(unsigned int max_cpus)
 {
 	unsigned int ncores = get_core_count();
@@ -179,14 +191,11 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	local_timer_setup(cpu);
 
 	/*
-	 * Initialise the possible/present maps.
-	 * cpu_possible_map describes the set of CPUs which may be present
-	 * cpu_present_map describes the set of CPUs populated
+	 * Initialise the present map, which describes the set of CPUs
+	 * actually populated at the present time.
 	 */
-	for (i = 0; i < max_cpus; i++) {
-		cpu_set(i, cpu_possible_map);
+	for (i = 0; i < max_cpus; i++)
 		cpu_set(i, cpu_present_map);
-	}
 
 	/*
 	 * Do we need any more CPUs? If so, then let them know where

arch/arm/mach-versatile/pci.c

@@ -240,6 +240,14 @@ int __init pci_versatile_setup(int nr, struct pci_sys_data *sys)
         int i;
         int myslot = -1;
 	unsigned long val;
+	void __iomem *local_pci_cfg_base;
+
+	val = __raw_readl(SYS_PCICTL);
+	if (!(val & 1)) {
+		printk("Not plugged into PCI backplane!\n");
+		ret = -EIO;
+		goto out;
+	}
 
 	if (nr == 0) {
 		sys->mem_offset = 0;
@@ -253,48 +261,45 @@ int __init pci_versatile_setup(int nr, struct pci_sys_data *sys)
 		goto out;
 	}
 
-	__raw_writel(VERSATILE_PCI_MEM_BASE0 >> 28,PCI_IMAP0);
-	__raw_writel(VERSATILE_PCI_MEM_BASE1 >> 28,PCI_IMAP1);
-	__raw_writel(VERSATILE_PCI_MEM_BASE2 >> 28,PCI_IMAP2);
-
-	__raw_writel(1, SYS_PCICTL);
-
-	val = __raw_readl(SYS_PCICTL);
-	if (!(val & 1)) {
-		printk("Not plugged into PCI backplane!\n");
-		ret = -EIO;
-		goto out;
-	}
-
 	/*
 	 *  We need to discover the PCI core first to configure itself
 	 *  before the main PCI probing is performed
 	 */
-	for (i=0; i<32; i++) {
+	for (i=0; i<32; i++)
 		if ((__raw_readl(VERSATILE_PCI_VIRT_BASE+(i<<11)+DEVICE_ID_OFFSET) == VP_PCI_DEVICE_ID) &&
 		    (__raw_readl(VERSATILE_PCI_VIRT_BASE+(i<<11)+CLASS_ID_OFFSET) == VP_PCI_CLASS_ID)) {
 			myslot = i;
-
-			__raw_writel(myslot, PCI_SELFID);
-			val = __raw_readl(VERSATILE_PCI_CFG_VIRT_BASE+(myslot<<11)+CSR_OFFSET);
-			val |= (1<<2);
-			__raw_writel(val, VERSATILE_PCI_CFG_VIRT_BASE+(myslot<<11)+CSR_OFFSET);
 			break;
 		}
-	}
 
 	if (myslot == -1) {
 		printk("Cannot find PCI core!\n");
 		ret = -EIO;
-	} else {
-		printk("PCI core found (slot %d)\n",myslot);
-		/* Do not to map Versatile FPGA PCI device
-		   into memory space as we are short of
-		   mappable memory */
-		pci_slot_ignore |= (1 << myslot);
-		ret = 1;
+		goto out;
 	}
 
+	printk("PCI core found (slot %d)\n",myslot);
+
+	__raw_writel(myslot, PCI_SELFID);
+	local_pci_cfg_base = (void *) VERSATILE_PCI_CFG_VIRT_BASE + (myslot << 11);
+
+	val = __raw_readl(local_pci_cfg_base + CSR_OFFSET);
+	val |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE;
+	__raw_writel(val, local_pci_cfg_base + CSR_OFFSET);
+
+	/*
+	 * Configure the PCI inbound memory windows to be 1:1 mapped to SDRAM
+	 */
+	__raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_0);
+	__raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_1);
+	__raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_2);
+
+	/*
+	 * Do not to map Versatile FPGA PCI device into memory space
+	 */
+	pci_slot_ignore |= (1 << myslot);
+	ret = 1;
+
  out:
 	return ret;
 }
@@ -305,18 +310,18 @@ struct pci_bus *pci_versatile_scan_bus(int nr, struct pci_sys_data *sys)
 	return pci_scan_bus(sys->busnr, &pci_versatile_ops, sys);
 }
 
-/*
- * V3_LB_BASE? - local bus address
- * V3_LB_MAP?  - pci bus address
- */
 void __init pci_versatile_preinit(void)
 {
-}
+	__raw_writel(VERSATILE_PCI_MEM_BASE0 >> 28, PCI_IMAP0);
+	__raw_writel(VERSATILE_PCI_MEM_BASE1 >> 28, PCI_IMAP1);
+	__raw_writel(VERSATILE_PCI_MEM_BASE2 >> 28, PCI_IMAP2);
 
-void __init pci_versatile_postinit(void)
-{
-}
+	__raw_writel(PHYS_OFFSET >> 28, PCI_SMAP0);
+	__raw_writel(PHYS_OFFSET >> 28, PCI_SMAP1);
+	__raw_writel(PHYS_OFFSET >> 28, PCI_SMAP2);
 
+	__raw_writel(1, SYS_PCICTL);
+}
 
 /*
  * map the specified device/slot/pin to an IRQ.   Different backplanes may need to modify this.
@@ -326,16 +331,15 @@ static int __init versatile_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 	int irq;
 	int devslot = PCI_SLOT(dev->devfn);
 
-	/* slot,  pin,  irq
-	    24	  1	27
-	    25    1	28	untested
-	    26	  1	29
-	    27    1	30	untested
-	*/
-
-	irq = 27 + ((slot + pin + 2) % 3);	/* Fudged */
+	/* slot,  pin,	irq
+	 *  24     1     27
+	 *  25     1     28
+	 *  26     1     29
+	 *  27     1     30
+	 */
+	irq = 27 + ((slot + pin - 1) & 3);
 
-	printk("map irq: slot %d, pin %d, devslot %d, irq: %d\n",slot,pin,devslot,irq);
+	printk("PCI map irq: slot %d, pin %d, devslot %d, irq: %d\n",slot,pin,devslot,irq);
 
 	return irq;
 }
@@ -347,7 +351,6 @@ static struct hw_pci versatile_pci __initdata = {
 	.setup			= pci_versatile_setup,
 	.scan			= pci_versatile_scan_bus,
 	.preinit		= pci_versatile_preinit,
-	.postinit		= pci_versatile_postinit,
 };
 
 static int __init versatile_pci_init(void)

arch/arm/mm/abort-ev6.S

@@ -20,7 +20,7 @@
  */
 	.align	5
 ENTRY(v6_early_abort)
-#ifdef CONFIG_CPU_MPCORE
+#ifdef CONFIG_CPU_32v6K
 	clrex
 #else
 	strex	r0, r1, [sp]			@ Clear the exclusive monitor

arch/arm/plat-omap/pm.c

@@ -38,7 +38,6 @@
 #include <linux/pm.h>
 #include <linux/sched.h>
 #include <linux/proc_fs.h>
-#include <linux/pm.h>
 #include <linux/interrupt.h>
 
 #include <asm/io.h>

arch/arm/tools/mach-types

@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Mon Jan 9 12:56:42 2006
+# Last update: Mon Feb 20 10:18:02 2006
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -904,7 +904,7 @@ wg302v2			MACH_WG302V2		WG302V2			890
 eb42x			MACH_EB42X		EB42X			891
 iq331es			MACH_IQ331ES		IQ331ES			892
 cosydsp			MACH_COSYDSP		COSYDSP			893
-uplat7d			MACH_UPLAT7D		UPLAT7D			894
+uplat7d_proto		MACH_UPLAT7D		UPLAT7D			894
 ptdavinci		MACH_PTDAVINCI		PTDAVINCI		895
 mbus			MACH_MBUS		MBUS			896
 nadia2vb		MACH_NADIA2VB		NADIA2VB		897
@@ -938,3 +938,34 @@ auckland		MACH_AUCKLAND		AUCKLAND		924
 ak3220m			MACH_AK3320M		AK3320M			925
 duramax			MACH_DURAMAX		DURAMAX			926
 n35			MACH_N35		N35			927
+pronghorn		MACH_PRONGHORN		PRONGHORN		928
+fundy			MACH_FUNDY		FUNDY			929
+logicpd_pxa270		MACH_LOGICPD_PXA270	LOGICPD_PXA270		930
+cpu777			MACH_CPU777		CPU777			931
+simicon9201		MACH_SIMICON9201	SIMICON9201		932
+leap2_hpm		MACH_LEAP2_HPM		LEAP2_HPM		933
+cm922txa10		MACH_CM922TXA10		CM922TXA10		934
+sandgate		MACH_PXA		PXA			935
+sandgate2		MACH_SANDGATE2		SANDGATE2		936
+sandgate2g		MACH_SANDGATE2G		SANDGATE2G		937
+sandgate2p		MACH_SANDGATE2P		SANDGATE2P		938
+fred_jack		MACH_FRED_JACK		FRED_JACK		939
+ttg_color1		MACH_TTG_COLOR1		TTG_COLOR1		940
+nxeb500hmi		MACH_NXEB500HMI		NXEB500HMI		941
+netdcu8			MACH_NETDCU8		NETDCU8			942
+ml675050_cpu_boa	MACH_ML675050_CPU_BOA	ML675050_CPU_BOA	943
+ng_fvx538		MACH_NG_FVX538		NG_FVX538		944
+ng_fvs338		MACH_NG_FVS338		NG_FVS338		945
+pnx4103			MACH_PNX4103		PNX4103			946
+hesdb			MACH_HESDB		HESDB			947
+xsilo			MACH_XSILO		XSILO			948
+espresso		MACH_ESPRESSO		ESPRESSO		949
+emlc			MACH_EMLC		EMLC			950
+sisteron		MACH_SISTERON		SISTERON		951
+rx1950			MACH_RX1950		RX1950			952
+tsc_venus		MACH_TSC_VENUS		TSC_VENUS		953
+ds101j			MACH_DS101J		DS101J			954
+mxc300_30ads		MACH_MXC30030ADS	MXC30030ADS		955
+fujitsu_wimaxsoc	MACH_FUJITSU_WIMAXSOC	FUJITSU_WIMAXSOC	956
+dualpcmodem		MACH_DUALPCMODEM	DUALPCMODEM		957
+gesbc9312		MACH_GESBC9312		GESBC9312		958

arch/h8300/Kconfig.debug

@@ -34,7 +34,7 @@ config GDB_DEBUG
 	help
 	  gdb stub exception support
 
-config CONFIG_SH_STANDARD_BIOS
+config SH_STANDARD_BIOS
 	bool "Use gdb protocol serial console"
 	depends on (!H8300H_SIM && !H8S_SIM)
 	help

arch/h8300/defconfig

@@ -328,7 +328,7 @@ CONFIG_FULLDEBUG=y
 CONFIG_NO_KERNEL_MSG=y
 # CONFIG_SYSCALL_PRINT is not set
 # CONFIG_GDB_DEBUG is not set
-# CONFIG_CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_DEFAULT_CMDLINE is not set
 # CONFIG_BLKDEV_RESERVE is not set
 

arch/i386/Kconfig

@@ -733,7 +733,7 @@ config PHYSICAL_START
 
 config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
-	depends on SMP && HOTPLUG && EXPERIMENTAL
+	depends on SMP && HOTPLUG && EXPERIMENTAL && !X86_VOYAGER
 	---help---
 	  Say Y here to experiment with turning CPUs off and on.  CPUs
 	  can be controlled through /sys/devices/system/cpu.
@@ -1060,6 +1060,7 @@ source "arch/i386/oprofile/Kconfig"
 
 config KPROBES
 	bool "Kprobes (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && MODULES
 	help
 	  Kprobes allows you to trap at almost any kernel address and
 	  execute a callback function.  register_kprobe() establishes

arch/i386/kernel/Makefile

@@ -7,7 +7,7 @@ extra-y := head.o init_task.o vmlinux.lds
 obj-y	:= process.o semaphore.o signal.o entry.o traps.o irq.o \
 		ptrace.o time.o ioport.o ldt.o setup.o i8259.o sys_i386.o \
 		pci-dma.o i386_ksyms.o i387.o dmi_scan.o bootflag.o \
-		quirks.o i8237.o
+		quirks.o i8237.o topology.o
 
 obj-y				+= cpu/
 obj-y				+= timers/

arch/i386/kernel/acpi/boot.c

@@ -44,9 +44,6 @@ extern void __init clustered_apic_check(void);
 extern int gsi_irq_sharing(int gsi);
 #include <asm/proto.h>
 
-static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id) { return 0; }
-
-
 #else				/* X86 */
 
 #ifdef	CONFIG_X86_LOCAL_APIC

arch/i386/kernel/cpu/common.c

@@ -4,6 +4,7 @@
 #include <linux/smp.h>
 #include <linux/module.h>
 #include <linux/percpu.h>
+#include <linux/bootmem.h>
 #include <asm/semaphore.h>
 #include <asm/processor.h>
 #include <asm/i387.h>
@@ -18,6 +19,9 @@
 
 #include "cpu.h"
 
+DEFINE_PER_CPU(struct Xgt_desc_struct, cpu_gdt_descr);
+EXPORT_PER_CPU_SYMBOL(cpu_gdt_descr);
+
 DEFINE_PER_CPU(unsigned char, cpu_16bit_stack[CPU_16BIT_STACK_SIZE]);
 EXPORT_PER_CPU_SYMBOL(cpu_16bit_stack);
 
@@ -571,8 +575,9 @@ void __devinit cpu_init(void)
 	int cpu = smp_processor_id();
 	struct tss_struct * t = &per_cpu(init_tss, cpu);
 	struct thread_struct *thread = &current->thread;
-	struct desc_struct *gdt = get_cpu_gdt_table(cpu);
+	struct desc_struct *gdt;
 	__u32 stk16_off = (__u32)&per_cpu(cpu_16bit_stack, cpu);
+	struct Xgt_desc_struct *cpu_gdt_descr = &per_cpu(cpu_gdt_descr, cpu);
 
 	if (cpu_test_and_set(cpu, cpu_initialized)) {
 		printk(KERN_WARNING "CPU#%d already initialized!\n", cpu);
@@ -589,6 +594,25 @@ void __devinit cpu_init(void)
 		set_in_cr4(X86_CR4_TSD);
 	}
 
+	/*
+	 * This is a horrible hack to allocate the GDT.  The problem
+	 * is that cpu_init() is called really early for the boot CPU
+	 * (and hence needs bootmem) but much later for the secondary
+	 * CPUs, when bootmem will have gone away
+	 */
+	if (NODE_DATA(0)->bdata->node_bootmem_map) {
+		gdt = (struct desc_struct *)alloc_bootmem_pages(PAGE_SIZE);
+		/* alloc_bootmem_pages panics on failure, so no check */
+		memset(gdt, 0, PAGE_SIZE);
+	} else {
+		gdt = (struct desc_struct *)get_zeroed_page(GFP_KERNEL);
+		if (unlikely(!gdt)) {
+			printk(KERN_CRIT "CPU%d failed to allocate GDT\n", cpu);
+			for (;;)
+				local_irq_enable();
+		}
+	}
+
 	/*
 	 * Initialize the per-CPU GDT with the boot GDT,
 	 * and set up the GDT descriptor:
@@ -601,10 +625,10 @@ void __devinit cpu_init(void)
 		((((__u64)stk16_off) << 32) & 0xff00000000000000ULL) |
 		(CPU_16BIT_STACK_SIZE - 1);
 
-	cpu_gdt_descr[cpu].size = GDT_SIZE - 1;
- 	cpu_gdt_descr[cpu].address = (unsigned long)gdt;
+	cpu_gdt_descr->size = GDT_SIZE - 1;
+ 	cpu_gdt_descr->address = (unsigned long)gdt;
 
-	load_gdt(&cpu_gdt_descr[cpu]);
+	load_gdt(cpu_gdt_descr);
 	load_idt(&idt_descr);
 
 	/*

arch/i386/kernel/cpu/transmeta.c

@@ -1,4 +1,5 @@
 #include <linux/kernel.h>
+#include <linux/mm.h>
 #include <linux/init.h>
 #include <asm/processor.h>
 #include <asm/msr.h>

arch/i386/kernel/efi.c

@@ -103,17 +103,19 @@ static void efi_call_phys_prelog(void)
 	 */
 	local_flush_tlb();
 
-	cpu_gdt_descr[0].address = __pa(cpu_gdt_descr[0].address);
-	load_gdt((struct Xgt_desc_struct *) __pa(&cpu_gdt_descr[0]));
+	per_cpu(cpu_gdt_descr, 0).address =
+				 __pa(per_cpu(cpu_gdt_descr, 0).address);
+	load_gdt((struct Xgt_desc_struct *)__pa(&per_cpu(cpu_gdt_descr, 0)));
 }
 
 static void efi_call_phys_epilog(void)
 {
 	unsigned long cr4;
 
-	cpu_gdt_descr[0].address =
-		(unsigned long) __va(cpu_gdt_descr[0].address);
-	load_gdt(&cpu_gdt_descr[0]);
+	per_cpu(cpu_gdt_descr, 0).address =
+			(unsigned long)__va(per_cpu(cpu_gdt_descr, 0).address);
+	load_gdt((struct Xgt_desc_struct *)__va(&per_cpu(cpu_gdt_descr, 0)));
+
 	cr4 = read_cr4();
 
 	if (cr4 & X86_CR4_PSE) {

arch/i386/kernel/head.S

@@ -534,5 +534,3 @@ ENTRY(cpu_gdt_table)
 	.quad 0x0000000000000000	/* 0xf0 - unused */
 	.quad 0x0000000000000000	/* 0xf8 - GDT entry 31: double-fault TSS */
 
-	/* Be sure this is zeroed to avoid false validations in Xen */
-	.fill PAGE_SIZE_asm / 8 - GDT_ENTRIES,8,0

arch/i386/kernel/i386_ksyms.c

@@ -3,8 +3,6 @@
 #include <asm/checksum.h>
 #include <asm/desc.h>
 
-EXPORT_SYMBOL_GPL(cpu_gdt_descr);
-
 EXPORT_SYMBOL(__down_failed);
 EXPORT_SYMBOL(__down_failed_interruptible);
 EXPORT_SYMBOL(__down_failed_trylock);

arch/i386/kernel/io_apic.c

@@ -2566,8 +2566,10 @@ int __init io_apic_get_unique_id (int ioapic, int apic_id)
 		spin_unlock_irqrestore(&ioapic_lock, flags);
 
 		/* Sanity check */
-		if (reg_00.bits.ID != apic_id)
-			panic("IOAPIC[%d]: Unable change apic_id!\n", ioapic);
+		if (reg_00.bits.ID != apic_id) {
+			printk("IOAPIC[%d]: Unable to change apic_id!\n", ioapic);
+			return -1;
+		}
 	}
 
 	apic_printk(APIC_VERBOSE, KERN_INFO

arch/i386/kernel/kprobes.c

@@ -58,6 +58,11 @@ static inline int is_IF_modifier(kprobe_opcode_t opcode)
 
 int __kprobes arch_prepare_kprobe(struct kprobe *p)
 {
+	/* insn: must be on special executable page on i386. */
+	p->ainsn.insn = get_insn_slot();
+	if (!p->ainsn.insn)
+		return -ENOMEM;
+
 	memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
 	p->opcode = *p->addr;
 	return 0;
@@ -77,6 +82,13 @@ void __kprobes arch_disarm_kprobe(struct kprobe *p)
 			   (unsigned long) p->addr + sizeof(kprobe_opcode_t));
 }
 
+void __kprobes arch_remove_kprobe(struct kprobe *p)
+{
+	down(&kprobe_mutex);
+	free_insn_slot(p->ainsn.insn);
+	up(&kprobe_mutex);
+}
+
 static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb)
 {
 	kcb->prev_kprobe.kp = kprobe_running();
@@ -111,7 +123,7 @@ static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
 	if (p->opcode == BREAKPOINT_INSTRUCTION)
 		regs->eip = (unsigned long)p->addr;
 	else
-		regs->eip = (unsigned long)&p->ainsn.insn;
+		regs->eip = (unsigned long)p->ainsn.insn;
 }
 
 /* Called with kretprobe_lock held */
@@ -351,7 +363,7 @@ static void __kprobes resume_execution(struct kprobe *p,
 {
 	unsigned long *tos = (unsigned long *)&regs->esp;
 	unsigned long next_eip = 0;
-	unsigned long copy_eip = (unsigned long)&p->ainsn.insn;
+	unsigned long copy_eip = (unsigned long)p->ainsn.insn;
 	unsigned long orig_eip = (unsigned long)p->addr;
 
 	switch (p->ainsn.insn[0]) {

arch/i386/kernel/mpparse.c

@@ -710,7 +710,7 @@ void __init get_smp_config (void)
 		 * Read the physical hardware table.  Anything here will
 		 * override the defaults.
 		 */
-		if (!smp_read_mpc((void *)mpf->mpf_physptr)) {
+		if (!smp_read_mpc(phys_to_virt(mpf->mpf_physptr))) {
 			smp_found_config = 0;
 			printk(KERN_ERR "BIOS bug, MP table errors detected!...\n");
 			printk(KERN_ERR "... disabling SMP support. (tell your hw vendor)\n");
@@ -915,6 +915,7 @@ void __init mp_register_ioapic (
 	u32			gsi_base)
 {
 	int			idx = 0;
+	int			tmpid;
 
 	if (nr_ioapics >= MAX_IO_APICS) {
 		printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded "
@@ -935,9 +936,14 @@ void __init mp_register_ioapic (
 
 	set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
 	if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && (boot_cpu_data.x86 < 15))
-		mp_ioapics[idx].mpc_apicid = io_apic_get_unique_id(idx, id);
+		tmpid = io_apic_get_unique_id(idx, id);
 	else
-		mp_ioapics[idx].mpc_apicid = id;
+		tmpid = id;
+	if (tmpid == -1) {
+		nr_ioapics--;
+		return;
+	}
+	mp_ioapics[idx].mpc_apicid = tmpid;
 	mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx);
 	
 	/* 

arch/i386/kernel/smpboot.c

@@ -898,12 +898,6 @@ static int __devinit do_boot_cpu(int apicid, int cpu)
 	unsigned long start_eip;
 	unsigned short nmi_high = 0, nmi_low = 0;
 
-	if (!cpu_gdt_descr[cpu].address &&
-	    !(cpu_gdt_descr[cpu].address = get_zeroed_page(GFP_KERNEL))) {
-		printk("Failed to allocate GDT for CPU %d\n", cpu);
-		return 1;
-	}
-
 	++cpucount;
 
 	/*

arch/i386/mach-default/topology.c → arch/i386/kernel/topology.c

@@ -1,12 +1,12 @@
 /*
- * arch/i386/mach-generic/topology.c - Populate driverfs with topology information
+ * arch/i386/kernel/topology.c - Populate driverfs with topology information
  *
  * Written by: Matthew Dobson, IBM Corporation
  * Original Code: Paul Dorwin, IBM Corporation, Patrick Mochel, OSDL
  *
  * Copyright (C) 2002, IBM Corp.
  *
- * All rights reserved.          
+ * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -34,7 +34,7 @@ static struct i386_cpu cpu_devices[NR_CPUS];
 
 int arch_register_cpu(int num){
 	struct node *parent = NULL;
-	
+
 #ifdef CONFIG_NUMA
 	int node = cpu_to_node(num);
 	if (node_online(node))

arch/i386/mach-default/Makefile

@@ -2,4 +2,4 @@
 # Makefile for the linux kernel.
 #
 
-obj-y				:= setup.o topology.o
+obj-y				:= setup.o

arch/i386/mach-voyager/voyager_basic.c

@@ -23,6 +23,8 @@
 #include <linux/delay.h>
 #include <linux/reboot.h>
 #include <linux/sysrq.h>
+#include <linux/smp.h>
+#include <linux/nodemask.h>
 #include <asm/io.h>
 #include <asm/voyager.h>
 #include <asm/vic.h>
@@ -328,4 +330,3 @@ void machine_power_off(void)
 	if (pm_power_off)
 		pm_power_off();
 }
-

arch/i386/mach-voyager/voyager_smp.c

@@ -402,6 +402,7 @@ find_smp_config(void)
 	cpus_addr(phys_cpu_present_map)[0] |= voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 1) << 8;
 	cpus_addr(phys_cpu_present_map)[0] |= voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 2) << 16;
 	cpus_addr(phys_cpu_present_map)[0] |= voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 3) << 24;
+	cpu_possible_map = phys_cpu_present_map;
 	printk("VOYAGER SMP: phys_cpu_present_map = 0x%lx\n", cpus_addr(phys_cpu_present_map)[0]);
 	/* Here we set up the VIC to enable SMP */
 	/* enable the CPIs by writing the base vector to their register */

arch/ia64/Kconfig

@@ -453,6 +453,7 @@ source "arch/ia64/oprofile/Kconfig"
 
 config KPROBES
 	bool "Kprobes (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && MODULES
 	help
 	  Kprobes allows you to trap at almost any kernel address and
 	  execute a callback function.  register_kprobe() establishes

arch/ia64/kernel/acpi.c

@@ -761,6 +761,59 @@ int acpi_map_cpu2node(acpi_handle handle, int cpu, long physid)
 	return (0);
 }
 
+int additional_cpus __initdata = -1;
+
+static __init int setup_additional_cpus(char *s)
+{
+	if (s)
+		additional_cpus = simple_strtol(s, NULL, 0);
+
+	return 0;
+}
+
+early_param("additional_cpus", setup_additional_cpus);
+
+/*
+ * cpu_possible_map should be static, it cannot change as cpu's
+ * are onlined, or offlined. The reason is per-cpu data-structures
+ * are allocated by some modules at init time, and dont expect to
+ * do this dynamically on cpu arrival/departure.
+ * cpu_present_map on the other hand can change dynamically.
+ * In case when cpu_hotplug is not compiled, then we resort to current
+ * behaviour, which is cpu_possible == cpu_present.
+ * - Ashok Raj
+ *
+ * Three ways to find out the number of additional hotplug CPUs:
+ * - If the BIOS specified disabled CPUs in ACPI/mptables use that.
+ * - The user can overwrite it with additional_cpus=NUM
+ * - Otherwise don't reserve additional CPUs.
+ */
+__init void prefill_possible_map(void)
+{
+	int i;
+	int possible, disabled_cpus;
+
+	disabled_cpus = total_cpus - available_cpus;
+
+ 	if (additional_cpus == -1) {
+ 		if (disabled_cpus > 0)
+			additional_cpus = disabled_cpus;
+ 		else
+			additional_cpus = 0;
+ 	}
+
+	possible = available_cpus + additional_cpus;
+
+	if (possible > NR_CPUS)
+		possible = NR_CPUS;
+
+	printk(KERN_INFO "SMP: Allowing %d CPUs, %d hotplug CPUs\n",
+		possible, max((possible - available_cpus), 0));
+
+	for (i = 0; i < possible; i++)
+		cpu_set(i, cpu_possible_map);
+}
+
 int acpi_map_lsapic(acpi_handle handle, int *pcpu)
 {
 	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };

arch/ia64/kernel/entry.S

@@ -569,7 +569,9 @@ GLOBAL_ENTRY(ia64_trace_syscall)
 .mem.offset 0,0; st8.spill [r2]=r8		// store return value in slot for r8
 .mem.offset 8,0; st8.spill [r3]=r10		// clear error indication in slot for r10
 	br.call.sptk.many rp=syscall_trace_leave // give parent a chance to catch return value
-.ret3:	br.cond.sptk .work_pending_syscall_end
+.ret3:
+(pUStk)	cmp.eq.unc p6,p0=r0,r0			// p6 <- pUStk
+	br.cond.sptk .work_pending_syscall_end
 
 strace_error:
 	ld8 r3=[r2]				// load pt_regs.r8

arch/ia64/kernel/ia64_ksyms.c

@@ -10,23 +10,8 @@
 
 #include <linux/string.h>
 EXPORT_SYMBOL(memset);
-EXPORT_SYMBOL(memchr);
-EXPORT_SYMBOL(memcmp);
 EXPORT_SYMBOL(memcpy);
-EXPORT_SYMBOL(memmove);
-EXPORT_SYMBOL(memscan);
-EXPORT_SYMBOL(strcat);
-EXPORT_SYMBOL(strchr);
-EXPORT_SYMBOL(strcmp);
-EXPORT_SYMBOL(strcpy);
 EXPORT_SYMBOL(strlen);
-EXPORT_SYMBOL(strncat);
-EXPORT_SYMBOL(strncmp);
-EXPORT_SYMBOL(strncpy);
-EXPORT_SYMBOL(strnlen);
-EXPORT_SYMBOL(strrchr);
-EXPORT_SYMBOL(strstr);
-EXPORT_SYMBOL(strpbrk);
 
 #include <asm/checksum.h>
 EXPORT_SYMBOL(ip_fast_csum);		/* hand-coded assembly */

arch/ia64/kernel/setup.c

@@ -430,6 +430,7 @@ setup_arch (char **cmdline_p)
 	if (early_console_setup(*cmdline_p) == 0)
 		mark_bsp_online();
 
+	parse_early_param();
 #ifdef CONFIG_ACPI
 	/* Initialize the ACPI boot-time table parser */
 	acpi_table_init();
@@ -688,6 +689,9 @@ void
 setup_per_cpu_areas (void)
 {
 	/* start_kernel() requires this... */
+#ifdef CONFIG_ACPI_HOTPLUG_CPU
+	prefill_possible_map();
+#endif
 }
 
 /*

arch/ia64/kernel/smpboot.c

@@ -129,7 +129,7 @@ DEFINE_PER_CPU(int, cpu_state);
 /* Bitmasks of currently online, and possible CPUs */
 cpumask_t cpu_online_map;
 EXPORT_SYMBOL(cpu_online_map);
-cpumask_t cpu_possible_map;
+cpumask_t cpu_possible_map = CPU_MASK_NONE;
 EXPORT_SYMBOL(cpu_possible_map);
 
 cpumask_t cpu_core_map[NR_CPUS] __cacheline_aligned;
@@ -506,9 +506,6 @@ smp_build_cpu_map (void)
 
 	for (cpu = 0; cpu < NR_CPUS; cpu++) {
 		ia64_cpu_to_sapicid[cpu] = -1;
-#ifdef CONFIG_HOTPLUG_CPU
-		cpu_set(cpu, cpu_possible_map);
-#endif
 	}
 
 	ia64_cpu_to_sapicid[0] = boot_cpu_id;

arch/ia64/kernel/time.c

@@ -250,32 +250,27 @@ time_init (void)
 	set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec);
 }
 
-#define SMALLUSECS 100
-
-void
-udelay (unsigned long usecs)
+/*
+ * Generic udelay assumes that if preemption is allowed and the thread
+ * migrates to another CPU, that the ITC values are synchronized across
+ * all CPUs.
+ */
+static void
+ia64_itc_udelay (unsigned long usecs)
 {
-	unsigned long start;
-	unsigned long cycles;
-	unsigned long smallusecs;
+	unsigned long start = ia64_get_itc();
+	unsigned long end = start + usecs*local_cpu_data->cyc_per_usec;
 
-	/*
-	 * Execute the non-preemptible delay loop (because the ITC might
-	 * not be synchronized between CPUS) in relatively short time
-	 * chunks, allowing preemption between the chunks.
-	 */
-	while (usecs > 0) {
-		smallusecs = (usecs > SMALLUSECS) ? SMALLUSECS : usecs;
-		preempt_disable();
-		cycles = smallusecs*local_cpu_data->cyc_per_usec;
-		start = ia64_get_itc();
+	while (time_before(ia64_get_itc(), end))
+		cpu_relax();
+}
 
-		while (ia64_get_itc() - start < cycles)
-			cpu_relax();
+void (*ia64_udelay)(unsigned long usecs) = &ia64_itc_udelay;
 
-		preempt_enable();
-		usecs -= smallusecs;
-	}
+void
+udelay (unsigned long usecs)
+{
+	(*ia64_udelay)(usecs);
 }
 EXPORT_SYMBOL(udelay);
 

arch/ia64/kernel/traps.c

@@ -16,6 +16,7 @@
 #include <linux/module.h>       /* for EXPORT_SYMBOL */
 #include <linux/hardirq.h>
 #include <linux/kprobes.h>
+#include <linux/delay.h>		/* for ssleep() */
 
 #include <asm/fpswa.h>
 #include <asm/ia32.h>
@@ -116,6 +117,13 @@ die (const char *str, struct pt_regs *regs, long err)
 	bust_spinlocks(0);
 	die.lock_owner = -1;
 	spin_unlock_irq(&die.lock);
+
+	if (panic_on_oops) {
+		printk(KERN_EMERG "Fatal exception: panic in 5 seconds\n");
+		ssleep(5);
+		panic("Fatal exception");
+	}
+
   	do_exit(SIGSEGV);
 }
 

arch/ia64/sn/kernel/io_init.c

@@ -23,6 +23,10 @@
 #include "xtalk/hubdev.h"
 #include "xtalk/xwidgetdev.h"
 
+
+extern void sn_init_cpei_timer(void);
+extern void register_sn_procfs(void);
+
 static struct list_head sn_sysdata_list;
 
 /* sysdata list struct */
@@ -40,12 +44,12 @@ struct brick {
 	struct slab_info slab_info[MAX_SLABS + 1];
 };
 
-int sn_ioif_inited = 0;		/* SN I/O infrastructure initialized? */
+int sn_ioif_inited;		/* SN I/O infrastructure initialized? */
 
 struct sn_pcibus_provider *sn_pci_provider[PCIIO_ASIC_MAX_TYPES];	/* indexed by asic type */
 
-static int max_segment_number = 0; /* Default highest segment number */
-static int max_pcibus_number = 255; /* Default highest pci bus number */
+static int max_segment_number;		 /* Default highest segment number */
+static int max_pcibus_number = 255;	/* Default highest pci bus number */
 
 /*
  * Hooks and struct for unsupported pci providers
@@ -84,7 +88,6 @@ static inline u64
 sal_get_device_dmaflush_list(u64 nasid, u64 widget_num, u64 device_num,
 			     u64 address)
 {
-
 	struct ia64_sal_retval ret_stuff;
 	ret_stuff.status = 0;
 	ret_stuff.v0 = 0;
@@ -94,7 +97,6 @@ sal_get_device_dmaflush_list(u64 nasid, u64 widget_num, u64 device_num,
 			(u64) nasid, (u64) widget_num,
 			(u64) device_num, (u64) address, 0, 0, 0);
 	return ret_stuff.status;
-
 }
 
 /*
@@ -102,7 +104,6 @@ sal_get_device_dmaflush_list(u64 nasid, u64 widget_num, u64 device_num,
  */
 static inline u64 sal_get_hubdev_info(u64 handle, u64 address)
 {
-
 	struct ia64_sal_retval ret_stuff;
 	ret_stuff.status = 0;
 	ret_stuff.v0 = 0;
@@ -118,7 +119,6 @@ static inline u64 sal_get_hubdev_info(u64 handle, u64 address)
  */
 static inline u64 sal_get_pcibus_info(u64 segment, u64 busnum, u64 address)
 {
-
 	struct ia64_sal_retval ret_stuff;
 	ret_stuff.status = 0;
 	ret_stuff.v0 = 0;
@@ -215,7 +215,7 @@ static void __init sn_fixup_ionodes(void)
 	struct hubdev_info *hubdev;
 	u64 status;
 	u64 nasid;
-	int i, widget, device;
+	int i, widget, device, size;
 
 	/*
 	 * Get SGI Specific HUB chipset information.
@@ -251,48 +251,37 @@ static void __init sn_fixup_ionodes(void)
 		if (!hubdev->hdi_flush_nasid_list.widget_p)
 			continue;
 
+		size = (HUB_WIDGET_ID_MAX + 1) *
+			sizeof(struct sn_flush_device_kernel *);
 		hubdev->hdi_flush_nasid_list.widget_p =
-		    kmalloc((HUB_WIDGET_ID_MAX + 1) *
-			    sizeof(struct sn_flush_device_kernel *),
-			    GFP_KERNEL);
-		memset(hubdev->hdi_flush_nasid_list.widget_p, 0x0,
-		       (HUB_WIDGET_ID_MAX + 1) *
-		       sizeof(struct sn_flush_device_kernel *));
+			kzalloc(size, GFP_KERNEL);
+		if (!hubdev->hdi_flush_nasid_list.widget_p)
+			BUG();
 
 		for (widget = 0; widget <= HUB_WIDGET_ID_MAX; widget++) {
-			sn_flush_device_kernel = kmalloc(DEV_PER_WIDGET *
-						         sizeof(struct
-						        sn_flush_device_kernel),
-						        GFP_KERNEL);
+			size = DEV_PER_WIDGET *
+				sizeof(struct sn_flush_device_kernel);
+			sn_flush_device_kernel = kzalloc(size, GFP_KERNEL);
 			if (!sn_flush_device_kernel)
 				BUG();
-			memset(sn_flush_device_kernel, 0x0,
-			       DEV_PER_WIDGET *
-			       sizeof(struct sn_flush_device_kernel));
 
 			dev_entry = sn_flush_device_kernel;
 			for (device = 0; device < DEV_PER_WIDGET;
 			     device++,dev_entry++) {
-				dev_entry->common = kmalloc(sizeof(struct
-					      	        sn_flush_device_common),
-					                    GFP_KERNEL);
+				size = sizeof(struct sn_flush_device_common);
+				dev_entry->common = kzalloc(size, GFP_KERNEL);
 				if (!dev_entry->common)
 					BUG();
-				memset(dev_entry->common, 0x0, sizeof(struct
-					     	       sn_flush_device_common));
 
 				if (sn_prom_feature_available(
 						       PRF_DEVICE_FLUSH_LIST))
 					status = sal_get_device_dmaflush_list(
-									  nasid,
-									 widget,
-								       	 device,
-						      (u64)(dev_entry->common));
+						     nasid, widget, device,
+						     (u64)(dev_entry->common));
 				else
 					status = sn_device_fixup_war(nasid,
-								     widget,
-							    	     device,
-							     dev_entry->common);
+						     widget, device,
+						     dev_entry->common);
 				if (status != SALRET_OK)
 					panic("SAL call failed: %s\n",
 					      ia64_sal_strerror(status));
@@ -383,13 +372,12 @@ void sn_pci_fixup_slot(struct pci_dev *dev)
 
 	pci_dev_get(dev); /* for the sysdata pointer */
 	pcidev_info = kzalloc(sizeof(struct pcidev_info), GFP_KERNEL);
-	if (pcidev_info <= 0)
+	if (!pcidev_info)
 		BUG();		/* Cannot afford to run out of memory */
 
-	sn_irq_info = kmalloc(sizeof(struct sn_irq_info), GFP_KERNEL);
-	if (sn_irq_info <= 0)
+	sn_irq_info = kzalloc(sizeof(struct sn_irq_info), GFP_KERNEL);
+	if (!sn_irq_info)
 		BUG();		/* Cannot afford to run out of memory */
-	memset(sn_irq_info, 0, sizeof(struct sn_irq_info));
 
 	/* Call to retrieve pci device information needed by kernel. */
 	status = sal_get_pcidev_info((u64) segment, (u64) dev->bus->number, 
@@ -482,13 +470,13 @@ void sn_pci_fixup_slot(struct pci_dev *dev)
  */
 void sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus)
 {
-	int status = 0;
+	int status;
 	int nasid, cnode;
 	struct pci_controller *controller;
 	struct sn_pci_controller *sn_controller;
 	struct pcibus_bussoft *prom_bussoft_ptr;
 	struct hubdev_info *hubdev_info;
-	void *provider_soft = NULL;
+	void *provider_soft;
 	struct sn_pcibus_provider *provider;
 
  	status = sal_get_pcibus_info((u64) segment, (u64) busnum,
@@ -535,6 +523,8 @@ void sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus)
 	bus->sysdata = controller;
 	if (provider->bus_fixup)
 		provider_soft = (*provider->bus_fixup) (prom_bussoft_ptr, controller);
+	else
+		provider_soft = NULL;
 
 	if (provider_soft == NULL) {
 		/* fixup failed or not applicable */
@@ -638,13 +628,8 @@ void sn_bus_free_sysdata(void)
 
 static int __init sn_pci_init(void)
 {
-	int i = 0;
-	int j = 0;
+	int i, j;
 	struct pci_dev *pci_dev = NULL;
-	extern void sn_init_cpei_timer(void);
-#ifdef CONFIG_PROC_FS
-	extern void register_sn_procfs(void);
-#endif
 
 	if (!ia64_platform_is("sn2") || IS_RUNNING_ON_FAKE_PROM())
 		return 0;
@@ -700,32 +685,29 @@ static int __init sn_pci_init(void)
  */
 void hubdev_init_node(nodepda_t * npda, cnodeid_t node)
 {
-
 	struct hubdev_info *hubdev_info;
+	int size;
+	pg_data_t *pg;
+
+	size = sizeof(struct hubdev_info);
 
 	if (node >= num_online_nodes())	/* Headless/memless IO nodes */
-		hubdev_info =
-		    (struct hubdev_info *)alloc_bootmem_node(NODE_DATA(0),
-							     sizeof(struct
-								    hubdev_info));
+		pg = NODE_DATA(0);
 	else
-		hubdev_info =
-		    (struct hubdev_info *)alloc_bootmem_node(NODE_DATA(node),
-							     sizeof(struct
-								    hubdev_info));
-	npda->pdinfo = (void *)hubdev_info;
+		pg = NODE_DATA(node);
 
+	hubdev_info = (struct hubdev_info *)alloc_bootmem_node(pg, size);
+
+	npda->pdinfo = (void *)hubdev_info;
 }
 
 geoid_t
 cnodeid_get_geoid(cnodeid_t cnode)
 {
-
 	struct hubdev_info *hubdev;
 
 	hubdev = (struct hubdev_info *)(NODEPDA(cnode)->pdinfo);
 	return hubdev->hdi_geoid;
-
 }
 
 subsys_initcall(sn_pci_init);
@@ -734,3 +716,4 @@ EXPORT_SYMBOL(sn_pci_unfixup_slot);
 EXPORT_SYMBOL(sn_pci_controller_fixup);
 EXPORT_SYMBOL(sn_bus_store_sysdata);
 EXPORT_SYMBOL(sn_bus_free_sysdata);
+EXPORT_SYMBOL(sn_pcidev_info_get);

arch/ia64/sn/kernel/setup.c

@@ -75,7 +75,7 @@ EXPORT_SYMBOL(sn_rtc_cycles_per_second);
 DEFINE_PER_CPU(struct sn_hub_info_s, __sn_hub_info);
 EXPORT_PER_CPU_SYMBOL(__sn_hub_info);
 
-DEFINE_PER_CPU(short, __sn_cnodeid_to_nasid[MAX_NUMNODES]);
+DEFINE_PER_CPU(short, __sn_cnodeid_to_nasid[MAX_COMPACT_NODES]);
 EXPORT_PER_CPU_SYMBOL(__sn_cnodeid_to_nasid);
 
 DEFINE_PER_CPU(struct nodepda_s *, __sn_nodepda);
@@ -317,6 +317,7 @@ struct pcdp_vga_device {
 #define PCDP_PCI_TRANS_IOPORT	0x02
 #define PCDP_PCI_TRANS_MMIO	0x01
 
+#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
 static void
 sn_scan_pcdp(void)
 {
@@ -358,6 +359,7 @@ sn_scan_pcdp(void)
 		break; /* once we find the primary, we're done */
 	}
 }
+#endif
 
 static unsigned long sn2_rtc_initial;
 

arch/ia64/sn/kernel/sn2/prominfo_proc.c

@@ -3,7 +3,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 1999,2001-2004 Silicon Graphics, Inc.  All Rights Reserved.
+ * Copyright (C) 1999,2001-2004, 2006 Silicon Graphics, Inc.  All Rights Reserved.
  *
  * Module to export the system's Firmware Interface Tables, including
  * PROM revision numbers and banners, in /proc
@@ -190,7 +190,7 @@ static int
 read_version_entry(char *page, char **start, off_t off, int count, int *eof,
 		   void *data)
 {
-	int len = 0;
+	int len;
 
 	/* data holds the NASID of the node */
 	len = dump_version(page, (unsigned long)data);
@@ -202,7 +202,7 @@ static int
 read_fit_entry(char *page, char **start, off_t off, int count, int *eof,
 	       void *data)
 {
-	int len = 0;
+	int len;
 
 	/* data holds the NASID of the node */
 	len = dump_fit(page, (unsigned long)data);
@@ -229,13 +229,16 @@ int __init prominfo_init(void)
 	struct proc_dir_entry *p;
 	cnodeid_t cnodeid;
 	unsigned long nasid;
+	int size;
 	char name[NODE_NAME_LEN];
 
 	if (!ia64_platform_is("sn2"))
 		return 0;
 
-	proc_entries = kmalloc(num_online_nodes() * sizeof(struct proc_dir_entry *),
-			       GFP_KERNEL);
+	size = num_online_nodes() * sizeof(struct proc_dir_entry *);
+	proc_entries = kzalloc(size, GFP_KERNEL);
+	if (!proc_entries)
+		return -ENOMEM;
 
 	sgi_prominfo_entry = proc_mkdir("sgi_prominfo", NULL);
 
@@ -244,14 +247,12 @@ int __init prominfo_init(void)
 		sprintf(name, "node%d", cnodeid);
 		*entp = proc_mkdir(name, sgi_prominfo_entry);
 		nasid = cnodeid_to_nasid(cnodeid);
-		p = create_proc_read_entry(
-			"fit", 0, *entp, read_fit_entry,
-			(void *)nasid);
+		p = create_proc_read_entry("fit", 0, *entp, read_fit_entry,
+					   (void *)nasid);
 		if (p)
 			p->owner = THIS_MODULE;
-		p = create_proc_read_entry(
-			"version", 0, *entp, read_version_entry,
-			(void *)nasid);
+		p = create_proc_read_entry("version", 0, *entp,
+					   read_version_entry, (void *)nasid);
 		if (p)
 			p->owner = THIS_MODULE;
 		entp++;
@@ -263,7 +264,7 @@ int __init prominfo_init(void)
 void __exit prominfo_exit(void)
 {
 	struct proc_dir_entry **entp;
-	unsigned cnodeid;
+	unsigned int cnodeid;
 	char name[NODE_NAME_LEN];
 
 	entp = proc_entries;

arch/ia64/sn/kernel/sn2/sn2_smp.c

@@ -46,8 +46,14 @@ DECLARE_PER_CPU(struct ptc_stats, ptcstats);
 
 static  __cacheline_aligned DEFINE_SPINLOCK(sn2_global_ptc_lock);
 
-void sn2_ptc_deadlock_recovery(short *, short, short, int, volatile unsigned long *, unsigned long,
-	volatile unsigned long *, unsigned long);
+extern unsigned long
+sn2_ptc_deadlock_recovery_core(volatile unsigned long *, unsigned long,
+			       volatile unsigned long *, unsigned long,
+			       volatile unsigned long *, unsigned long);
+void
+sn2_ptc_deadlock_recovery(short *, short, short, int,
+			  volatile unsigned long *, unsigned long,
+			  volatile unsigned long *, unsigned long);
 
 /*
  * Note: some is the following is captured here to make degugging easier
@@ -59,16 +65,6 @@ void sn2_ptc_deadlock_recovery(short *, short, short, int, volatile unsigned lon
 #define reset_max_active_on_deadlock()	1
 #define PTC_LOCK(sh1)			((sh1) ? &sn2_global_ptc_lock : &sn_nodepda->ptc_lock)
 
-static inline void ptc_lock(int sh1, unsigned long *flagp)
-{
-	spin_lock_irqsave(PTC_LOCK(sh1), *flagp);
-}
-
-static inline void ptc_unlock(int sh1, unsigned long flags)
-{
-	spin_unlock_irqrestore(PTC_LOCK(sh1), flags);
-}
-
 struct ptc_stats {
 	unsigned long ptc_l;
 	unsigned long change_rid;
@@ -82,6 +78,8 @@ struct ptc_stats {
 	unsigned long shub_ptc_flushes_not_my_mm;
 };
 
+#define sn2_ptctest	0
+
 static inline unsigned long wait_piowc(void)
 {
 	volatile unsigned long *piows;
@@ -200,7 +198,7 @@ sn2_global_tlb_purge(struct mm_struct *mm, unsigned long start,
 	max_active = max_active_pio(shub1);
 
 	itc = ia64_get_itc();
-	ptc_lock(shub1, &flags);
+	spin_lock_irqsave(PTC_LOCK(shub1), flags);
 	itc2 = ia64_get_itc();
 
 	__get_cpu_var(ptcstats).lock_itc_clocks += itc2 - itc;
@@ -258,7 +256,7 @@ sn2_global_tlb_purge(struct mm_struct *mm, unsigned long start,
 		ia64_srlz_d();
 	}
 
-	ptc_unlock(shub1, flags);
+	spin_unlock_irqrestore(PTC_LOCK(shub1), flags);
 
 	preempt_enable();
 }
@@ -270,11 +268,12 @@ sn2_global_tlb_purge(struct mm_struct *mm, unsigned long start,
  * TLB flush transaction.  The recovery sequence is somewhat tricky & is
  * coded in assembly language.
  */
-void sn2_ptc_deadlock_recovery(short *nasids, short ib, short ie, int mynasid, volatile unsigned long *ptc0, unsigned long data0,
-	volatile unsigned long *ptc1, unsigned long data1)
+
+void
+sn2_ptc_deadlock_recovery(short *nasids, short ib, short ie, int mynasid,
+			  volatile unsigned long *ptc0, unsigned long data0,
+			  volatile unsigned long *ptc1, unsigned long data1)
 {
-	extern unsigned long sn2_ptc_deadlock_recovery_core(volatile unsigned long *, unsigned long,
-	        volatile unsigned long *, unsigned long, volatile unsigned long *, unsigned long);
 	short nasid, i;
 	unsigned long *piows, zeroval, n;
 

arch/ia64/sn/kernel/sn2/sn_proc_fs.c

@@ -6,11 +6,11 @@
  * Copyright (C) 2000-2005 Silicon Graphics, Inc. All rights reserved.
  */
 #include <linux/config.h>
-#include <asm/uaccess.h>
 
 #ifdef CONFIG_PROC_FS
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
+#include <asm/uaccess.h>
 #include <asm/sn/sn_sal.h>
 
 static int partition_id_show(struct seq_file *s, void *p)
@@ -90,10 +90,10 @@ static int coherence_id_open(struct inode *inode, struct file *file)
 	return single_open(file, coherence_id_show, NULL);
 }
 
-static struct proc_dir_entry *sn_procfs_create_entry(
-	const char *name, struct proc_dir_entry *parent,
-	int (*openfunc)(struct inode *, struct file *),
-	int (*releasefunc)(struct inode *, struct file *))
+static struct proc_dir_entry
+*sn_procfs_create_entry(const char *name, struct proc_dir_entry *parent,
+			int (*openfunc)(struct inode *, struct file *),
+			int (*releasefunc)(struct inode *, struct file *))
 {
 	struct proc_dir_entry *e = create_proc_entry(name, 0444, parent);
 
@@ -126,24 +126,24 @@ void register_sn_procfs(void)
 		return;
 
 	sn_procfs_create_entry("partition_id", sgi_proc_dir,
-		partition_id_open, single_release);
+			       partition_id_open, single_release);
 
 	sn_procfs_create_entry("system_serial_number", sgi_proc_dir,
-		system_serial_number_open, single_release);
+			       system_serial_number_open, single_release);
 
 	sn_procfs_create_entry("licenseID", sgi_proc_dir, 
-		licenseID_open, single_release);
+			       licenseID_open, single_release);
 
 	e = sn_procfs_create_entry("sn_force_interrupt", sgi_proc_dir, 
-		sn_force_interrupt_open, single_release);
+				   sn_force_interrupt_open, single_release);
 	if (e) 
 		e->proc_fops->write = sn_force_interrupt_write_proc;
 
 	sn_procfs_create_entry("coherence_id", sgi_proc_dir, 
-		coherence_id_open, single_release);
+			       coherence_id_open, single_release);
 	
 	sn_procfs_create_entry("sn_topology", sgi_proc_dir,
-		sn_topology_open, sn_topology_release);
+			       sn_topology_open, sn_topology_release);
 }
 
 #endif /* CONFIG_PROC_FS */

arch/ia64/sn/kernel/sn2/timer.c

@@ -14,6 +14,7 @@
 
 #include <asm/hw_irq.h>
 #include <asm/system.h>
+#include <asm/timex.h>
 
 #include <asm/sn/leds.h>
 #include <asm/sn/shub_mmr.h>
@@ -28,9 +29,27 @@ static struct time_interpolator sn2_interpolator = {
 	.source = TIME_SOURCE_MMIO64
 };
 
+/*
+ * sn udelay uses the RTC instead of the ITC because the ITC is not
+ * synchronized across all CPUs, and the thread may migrate to another CPU
+ * if preemption is enabled.
+ */
+static void
+ia64_sn_udelay (unsigned long usecs)
+{
+	unsigned long start = rtc_time();
+	unsigned long end = start +
+			usecs * sn_rtc_cycles_per_second / 1000000;
+
+	while (time_before((unsigned long)rtc_time(), end))
+		cpu_relax();
+}
+
 void __init sn_timer_init(void)
 {
 	sn2_interpolator.frequency = sn_rtc_cycles_per_second;
 	sn2_interpolator.addr = RTC_COUNTER_ADDR;
 	register_time_interpolator(&sn2_interpolator);
+
+	ia64_udelay = &ia64_sn_udelay;
 }

arch/ia64/sn/kernel/sn2/timer_interrupt.c

@@ -1,7 +1,7 @@
 /*
  *
  *
- * Copyright (c) 2005 Silicon Graphics, Inc.  All Rights Reserved.
+ * Copyright (c) 2005, 2006 Silicon Graphics, Inc.  All Rights Reserved.
  * 
  * This program is free software; you can redistribute it and/or modify it 
  * under the terms of version 2 of the GNU General Public License 
@@ -22,11 +22,6 @@
  * License along with this program; if not, write the Free Software 
  * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
  * 
- * Contact information:  Silicon Graphics, Inc., 1600 Amphitheatre Pkwy, 
- * Mountain View, CA  94043, or:
- * 
- * http://www.sgi.com 
- * 
  * For further information regarding this notice, see: 
  * 
  * http://oss.sgi.com/projects/GenInfo/NoticeExplan

arch/ia64/sn/kernel/tiocx.c

@@ -284,12 +284,10 @@ struct sn_irq_info *tiocx_irq_alloc(nasid_t nasid, int widget, int irq,
 	if ((nasid & 1) == 0)
 		return NULL;
 
-	sn_irq_info = kmalloc(sn_irq_size, GFP_KERNEL);
+	sn_irq_info = kzalloc(sn_irq_size, GFP_KERNEL);
 	if (sn_irq_info == NULL)
 		return NULL;
 
-	memset(sn_irq_info, 0x0, sn_irq_size);
-
 	status = tiocx_intr_alloc(nasid, widget, __pa(sn_irq_info), irq,
 				  req_nasid, slice);
 	if (status) {

arch/ia64/sn/kernel/xpc_channel.c

@@ -738,7 +738,9 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags)
 
 	/* make sure all activity has settled down first */
 
-	if (atomic_read(&ch->references) > 0) {
+	if (atomic_read(&ch->references) > 0 ||
+			((ch->flags & XPC_C_CONNECTEDCALLOUT_MADE) &&
+			!(ch->flags & XPC_C_DISCONNECTINGCALLOUT_MADE))) {
 		return;
 	}
 	DBUG_ON(atomic_read(&ch->kthreads_assigned) != 0);
@@ -775,7 +777,7 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags)
 
 	/* both sides are disconnected now */
 
-	if (ch->flags & XPC_C_CONNECTCALLOUT) {
+	if (ch->flags & XPC_C_DISCONNECTINGCALLOUT_MADE) {
 		spin_unlock_irqrestore(&ch->lock, *irq_flags);
 		xpc_disconnect_callout(ch, xpcDisconnected);
 		spin_lock_irqsave(&ch->lock, *irq_flags);
@@ -1300,7 +1302,7 @@ xpc_process_msg_IPI(struct xpc_partition *part, int ch_number)
 				"delivered=%d, partid=%d, channel=%d\n",
 				nmsgs_sent, ch->partid, ch->number);
 
-			if (ch->flags & XPC_C_CONNECTCALLOUT) {
+			if (ch->flags & XPC_C_CONNECTEDCALLOUT_MADE) {
 				xpc_activate_kthreads(ch, nmsgs_sent);
 			}
 		}

arch/ia64/sn/kernel/xpc_main.c

@@ -750,12 +750,16 @@ xpc_daemonize_kthread(void *args)
 		/* let registerer know that connection has been established */
 
 		spin_lock_irqsave(&ch->lock, irq_flags);
-		if (!(ch->flags & XPC_C_CONNECTCALLOUT)) {
-			ch->flags |= XPC_C_CONNECTCALLOUT;
+		if (!(ch->flags & XPC_C_CONNECTEDCALLOUT)) {
+			ch->flags |= XPC_C_CONNECTEDCALLOUT;
 			spin_unlock_irqrestore(&ch->lock, irq_flags);
 
 			xpc_connected_callout(ch);
 
+			spin_lock_irqsave(&ch->lock, irq_flags);
+			ch->flags |= XPC_C_CONNECTEDCALLOUT_MADE;
+			spin_unlock_irqrestore(&ch->lock, irq_flags);
+
 			/*
 			 * It is possible that while the callout was being
 			 * made that the remote partition sent some messages.
@@ -777,15 +781,17 @@ xpc_daemonize_kthread(void *args)
 
 	if (atomic_dec_return(&ch->kthreads_assigned) == 0) {
 		spin_lock_irqsave(&ch->lock, irq_flags);
-		if ((ch->flags & XPC_C_CONNECTCALLOUT) &&
-				!(ch->flags & XPC_C_DISCONNECTCALLOUT)) {
-			ch->flags |= XPC_C_DISCONNECTCALLOUT;
+		if ((ch->flags & XPC_C_CONNECTEDCALLOUT_MADE) &&
+				!(ch->flags & XPC_C_DISCONNECTINGCALLOUT)) {
+			ch->flags |= XPC_C_DISCONNECTINGCALLOUT;
 			spin_unlock_irqrestore(&ch->lock, irq_flags);
 
 			xpc_disconnect_callout(ch, xpcDisconnecting);
-		} else {
-			spin_unlock_irqrestore(&ch->lock, irq_flags);
+
+			spin_lock_irqsave(&ch->lock, irq_flags);
+			ch->flags |= XPC_C_DISCONNECTINGCALLOUT_MADE;
 		}
+		spin_unlock_irqrestore(&ch->lock, irq_flags);
 		if (atomic_dec_return(&part->nchannels_engaged) == 0) {
 			xpc_mark_partition_disengaged(part);
 			xpc_IPI_send_disengage(part);

arch/ia64/sn/pci/pci_dma.c

@@ -335,10 +335,10 @@ int sn_pci_legacy_read(struct pci_bus *bus, u16 port, u32 *val, u8 size)
 	 */
 
 	SAL_CALL(isrv, SN_SAL_IOIF_PCI_SAFE,
-		pci_domain_nr(bus), bus->number,
-		0, /* io */
-		0, /* read */
-		port, size, __pa(val));
+		 pci_domain_nr(bus), bus->number,
+		 0, /* io */
+		 0, /* read */
+		 port, size, __pa(val));
 
 	if (isrv.status == 0)
 		return size;
@@ -381,10 +381,10 @@ int sn_pci_legacy_write(struct pci_bus *bus, u16 port, u32 val, u8 size)
 	 */
 
 	SAL_CALL(isrv, SN_SAL_IOIF_PCI_SAFE,
-		pci_domain_nr(bus), bus->number,
-		0, /* io */
-		1, /* write */
-		port, size, __pa(&val));
+		 pci_domain_nr(bus), bus->number,
+		 0, /* io */
+		 1, /* write */
+		 port, size, __pa(&val));
 
 	if (isrv.status == 0)
 		return size;

arch/ia64/sn/pci/pcibr/pcibr_ate.c

@@ -3,7 +3,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 2001-2004 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (C) 2001-2006 Silicon Graphics, Inc. All rights reserved.
  */
 
 #include <linux/types.h>
@@ -12,7 +12,7 @@
 #include <asm/sn/pcibus_provider_defs.h>
 #include <asm/sn/pcidev.h>
 
-int pcibr_invalidate_ate = 0;	/* by default don't invalidate ATE on free */
+int pcibr_invalidate_ate;	/* by default don't invalidate ATE on free */
 
 /*
  * mark_ate: Mark the ate as either free or inuse.
@@ -20,14 +20,12 @@ int pcibr_invalidate_ate = 0;	/* by default don't invalidate ATE on free */
 static void mark_ate(struct ate_resource *ate_resource, int start, int number,
 		     u64 value)
 {
-
 	u64 *ate = ate_resource->ate;
 	int index;
 	int length = 0;
 
 	for (index = start; length < number; index++, length++)
 		ate[index] = value;
-
 }
 
 /*
@@ -37,7 +35,6 @@ static void mark_ate(struct ate_resource *ate_resource, int start, int number,
 static int find_free_ate(struct ate_resource *ate_resource, int start,
 			 int count)
 {
-
 	u64 *ate = ate_resource->ate;
 	int index;
 	int start_free;
@@ -70,12 +67,10 @@ static int find_free_ate(struct ate_resource *ate_resource, int start,
 static inline void free_ate_resource(struct ate_resource *ate_resource,
 				     int start)
 {
-
 	mark_ate(ate_resource, start, ate_resource->ate[start], 0);
 	if ((ate_resource->lowest_free_index > start) ||
 	    (ate_resource->lowest_free_index < 0))
 		ate_resource->lowest_free_index = start;
-
 }
 
 /*
@@ -84,7 +79,6 @@ static inline void free_ate_resource(struct ate_resource *ate_resource,
 static inline int alloc_ate_resource(struct ate_resource *ate_resource,
 				     int ate_needed)
 {
-
 	int start_index;
 
 	/*
@@ -118,19 +112,12 @@ static inline int alloc_ate_resource(struct ate_resource *ate_resource,
  */
 int pcibr_ate_alloc(struct pcibus_info *pcibus_info, int count)
 {
-	int status = 0;
-	u64 flag;
+	int status;
+	unsigned long flags;
 
-	flag = pcibr_lock(pcibus_info);
+	spin_lock_irqsave(&pcibus_info->pbi_lock, flags);
 	status = alloc_ate_resource(&pcibus_info->pbi_int_ate_resource, count);
-
-	if (status < 0) {
-		/* Failed to allocate */
-		pcibr_unlock(pcibus_info, flag);
-		return -1;
-	}
-
-	pcibr_unlock(pcibus_info, flag);
+	spin_unlock_irqrestore(&pcibus_info->pbi_lock, flags);
 
 	return status;
 }
@@ -182,7 +169,7 @@ void pcibr_ate_free(struct pcibus_info *pcibus_info, int index)
 		ate_write(pcibus_info, index, count, (ate & ~PCI32_ATE_V));
 	}
 
-	flags = pcibr_lock(pcibus_info);
+	spin_lock_irqsave(&pcibus_info->pbi_lock, flags);
 	free_ate_resource(&pcibus_info->pbi_int_ate_resource, index);
-	pcibr_unlock(pcibus_info, flags);
+	spin_unlock_irqrestore(&pcibus_info->pbi_lock, flags);
 }

arch/ia64/sn/pci/pcibr/pcibr_dma.c

@@ -137,14 +137,12 @@ pcibr_dmatrans_direct64(struct pcidev_info * info, u64 paddr,
 		pci_addr |= PCI64_ATTR_VIRTUAL;
 
 	return pci_addr;
-
 }
 
 static dma_addr_t
 pcibr_dmatrans_direct32(struct pcidev_info * info,
 			u64 paddr, size_t req_size, u64 flags)
 {
-
 	struct pcidev_info *pcidev_info = info->pdi_host_pcidev_info;
 	struct pcibus_info *pcibus_info = (struct pcibus_info *)pcidev_info->
 	    pdi_pcibus_info;
@@ -171,7 +169,6 @@ pcibr_dmatrans_direct32(struct pcidev_info * info,
 	}
 
 	return PCI32_DIRECT_BASE | offset;
-
 }
 
 /*
@@ -218,9 +215,8 @@ void sn_dma_flush(u64 addr)
 	u64 flags;
 	u64 itte;
 	struct hubdev_info *hubinfo;
-	volatile struct sn_flush_device_kernel *p;
-	volatile struct sn_flush_device_common *common;
-
+	struct sn_flush_device_kernel *p;
+	struct sn_flush_device_common *common;
 	struct sn_flush_nasid_entry *flush_nasid_list;
 
 	if (!sn_ioif_inited)
@@ -310,8 +306,7 @@ void sn_dma_flush(u64 addr)
 					     (common->sfdl_slot - 1));
 		}
 	} else {
-		spin_lock_irqsave((spinlock_t *)&p->sfdl_flush_lock,
-				  flags);
+		spin_lock_irqsave(&p->sfdl_flush_lock, flags);
 		*common->sfdl_flush_addr = 0;
 
 		/* force an interrupt. */
@@ -322,8 +317,7 @@ void sn_dma_flush(u64 addr)
 			cpu_relax();
 
 		/* okay, everything is synched up. */
-		spin_unlock_irqrestore((spinlock_t *)&p->sfdl_flush_lock,
-				       flags);
+		spin_unlock_irqrestore(&p->sfdl_flush_lock, flags);
 	}
 	return;
 }

arch/ia64/sn/pci/pcibr/pcibr_provider.c

@@ -163,9 +163,12 @@ pcibr_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont
 	/* Setup the PMU ATE map */
 	soft->pbi_int_ate_resource.lowest_free_index = 0;
 	soft->pbi_int_ate_resource.ate =
-	    kmalloc(soft->pbi_int_ate_size * sizeof(u64), GFP_KERNEL);
-	memset(soft->pbi_int_ate_resource.ate, 0,
- 	       (soft->pbi_int_ate_size * sizeof(u64)));
+	    kzalloc(soft->pbi_int_ate_size * sizeof(u64), GFP_KERNEL);
+
+	if (!soft->pbi_int_ate_resource.ate) {
+		kfree(soft);
+		return NULL;
+	}
 
 	if (prom_bussoft->bs_asic_type == PCIIO_ASIC_TYPE_TIOCP) {
 		/* TIO PCI Bridge: find nearest node with CPUs */

arch/m32r/Makefile

@@ -12,14 +12,14 @@ CFLAGS_MODULE += -mmodel=large
 
 ifdef CONFIG_CHIP_VDEC2
 cflags-$(CONFIG_ISA_M32R2)	+= -DNO_FPU -Wa,-bitinst
-aflags-$(CONFIG_ISA_M32R2)	+= -DNO_FPU -Wa,-bitinst
+aflags-$(CONFIG_ISA_M32R2)	+= -DNO_FPU -O2 -Wa,-bitinst -Wa,-no-parallel
 else
 cflags-$(CONFIG_ISA_M32R2)	+= -DNO_FPU -m32r2
-aflags-$(CONFIG_ISA_M32R2)	+= -DNO_FPU -m32r2
+aflags-$(CONFIG_ISA_M32R2)	+= -DNO_FPU -m32r2 -O2
 endif
 
 cflags-$(CONFIG_ISA_M32R)	+= -DNO_FPU
-aflags-$(CONFIG_ISA_M32R)	+= -DNO_FPU -Wa,-no-bitinst
+aflags-$(CONFIG_ISA_M32R)	+= -DNO_FPU -O2 -Wa,-no-bitinst
 
 CFLAGS += $(cflags-y)
 AFLAGS += $(aflags-y)

arch/m32r/kernel/signal.c

@@ -36,7 +36,7 @@ int do_signal(struct pt_regs *, sigset_t *);
 asmlinkage int
 sys_rt_sigsuspend(sigset_t *unewset, size_t sigsetsize,
 		  unsigned long r2, unsigned long r3, unsigned long r4,
-		  unsigned long r5, unsigned long r6, struct pt_regs regs)
+		  unsigned long r5, unsigned long r6, struct pt_regs *regs)
 {
 	sigset_t saveset, newset;
 
@@ -54,21 +54,21 @@ sys_rt_sigsuspend(sigset_t *unewset, size_t sigsetsize,
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
 
-	regs.r0 = -EINTR;
+	regs->r0 = -EINTR;
 	while (1) {
 		current->state = TASK_INTERRUPTIBLE;
 		schedule();
-		if (do_signal(&regs, &saveset))
-			return regs.r0;
+		if (do_signal(regs, &saveset))
+			return regs->r0;
 	}
 }
 
 asmlinkage int
 sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
 		unsigned long r2, unsigned long r3, unsigned long r4,
-		unsigned long r5, unsigned long r6, struct pt_regs regs)
+		unsigned long r5, unsigned long r6, struct pt_regs *regs)
 {
-	return do_sigaltstack(uss, uoss, regs.spu);
+	return do_sigaltstack(uss, uoss, regs->spu);
 }
 
 
@@ -140,11 +140,10 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc,
 asmlinkage int
 sys_rt_sigreturn(unsigned long r0, unsigned long r1,
 		 unsigned long r2, unsigned long r3, unsigned long r4,
-		 unsigned long r5, unsigned long r6, struct pt_regs regs)
+		 unsigned long r5, unsigned long r6, struct pt_regs *regs)
 {
-	struct rt_sigframe __user *frame = (struct rt_sigframe __user *)regs.spu;
+	struct rt_sigframe __user *frame = (struct rt_sigframe __user *)regs->spu;
 	sigset_t set;
-	stack_t st;
 	int result;
 
 	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
@@ -158,14 +157,11 @@ sys_rt_sigreturn(unsigned long r0, unsigned long r1,
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
 
-	if (restore_sigcontext(&regs, &frame->uc.uc_mcontext, &result))
+	if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &result))
 		goto badframe;
 
-	if (__copy_from_user(&st, &frame->uc.uc_stack, sizeof(st)))
+	if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->spu) == -EFAULT)
 		goto badframe;
-	/* It is more difficult to avoid calling this function than to
-	   call it and ignore errors.  */
-	do_sigaltstack(&st, NULL, regs.spu);
 
 	return result;
 

arch/m32r/kernel/sys_m32r.c

@@ -29,28 +29,7 @@
 
 /*
  * sys_tas() - test-and-set
- * linuxthreads testing version
  */
-#ifndef CONFIG_SMP
-asmlinkage int sys_tas(int *addr)
-{
-	int oldval;
-	unsigned long flags;
-
-	if (!access_ok(VERIFY_WRITE, addr, sizeof (int)))
-		return -EFAULT;
-	local_irq_save(flags);
-	oldval = *addr;
-	if (!oldval)
-		*addr = 1;
-	local_irq_restore(flags);
-	return oldval;
-}
-#else /* CONFIG_SMP */
-#include <linux/spinlock.h>
-
-static DEFINE_SPINLOCK(tas_lock);
-
 asmlinkage int sys_tas(int *addr)
 {
 	int oldval;
@@ -58,15 +37,43 @@ asmlinkage int sys_tas(int *addr)
 	if (!access_ok(VERIFY_WRITE, addr, sizeof (int)))
 		return -EFAULT;
 
-	_raw_spin_lock(&tas_lock);
-	oldval = *addr;
-	if (!oldval)
-		*addr = 1;
-	_raw_spin_unlock(&tas_lock);
+	/* atomic operation:
+	 *   oldval = *addr; *addr = 1;
+	 */
+	__asm__ __volatile__ (
+		DCACHE_CLEAR("%0", "r4", "%1")
+		"	.fillinsn\n"
+		"1:\n"
+		"	lock	%0, @%1	    ->	unlock	%2, @%1\n"
+		"2:\n"
+		/* NOTE:
+		 *   The m32r processor can accept interrupts only
+		 *   at the 32-bit instruction boundary.
+		 *   So, in the above code, the "unlock" instruction
+		 *   can be executed continuously after the "lock"
+		 *   instruction execution without any interruptions.
+		 */
+		".section .fixup,\"ax\"\n"
+		"	.balign 4\n"
+		"3:	ldi	%0, #%3\n"
+		"	seth	r14, #high(2b)\n"
+		"	or3	r14, r14, #low(2b)\n"
+		"	jmp	r14\n"
+		".previous\n"
+		".section __ex_table,\"a\"\n"
+		"	.balign 4\n"
+		"	.long 1b,3b\n"
+		".previous\n"
+		: "=&r" (oldval)
+		: "r" (addr), "r" (1), "i"(-EFAULT)
+		: "r14", "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+		  , "r4"
+#endif /* CONFIG_CHIP_M32700_TS1 */
+	);
 
 	return oldval;
 }
-#endif /* CONFIG_SMP */
 
 /*
  * sys_pipe() is the normal C calling standard for creating

arch/m32r/lib/usercopy.c

@@ -64,7 +64,7 @@ do {									\
 		"	.balign 4\n"					\
 		"	.long 0b,3b\n"					\
 		".previous"						\
-		: "=r"(res), "=r"(count), "=&r" (__d0), "=&r" (__d1),	\
+		: "=&r"(res), "=&r"(count), "=&r" (__d0), "=&r" (__d1),	\
 		  "=&r" (__d2)						\
 		: "i"(-EFAULT), "0"(count), "1"(count), "3"(src), 	\
 		  "4"(dst)						\
@@ -101,7 +101,7 @@ do {									\
 		"	.balign 4\n"					\
 		"	.long 0b,3b\n"					\
 		".previous"						\
-		: "=r"(res), "=r"(count), "=&r" (__d0), "=&r" (__d1),	\
+		: "=&r"(res), "=&r"(count), "=&r" (__d0), "=&r" (__d1),	\
 		  "=&r" (__d2)						\
 		: "i"(-EFAULT), "0"(count), "1"(count), "3"(src),	\
 		  "4"(dst)						\

arch/m68k/kernel/process.c

@@ -129,6 +129,9 @@ void machine_power_off(void)
 	for (;;);
 }
 
+void (*pm_power_off)(void) = machine_power_off;
+EXPORT_SYMBOL(pm_power_off);
+
 void show_regs(struct pt_regs * regs)
 {
 	printk("\n");

arch/mips/configs/ip27_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:21 2005
+# Linux kernel version: 2.6.16-rc4
+# Tue Feb 21 13:44:31 2006
 #
 CONFIG_MIPS=y
 
@@ -144,7 +144,6 @@ CONFIG_PREEMPT_BKL=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -250,6 +249,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -289,6 +289,7 @@ CONFIG_TCP_CONG_BIC=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -448,7 +449,7 @@ CONFIG_SCSI_SAS_ATTRS=m
 #
 # SCSI low-level drivers
 #
-CONFIG_ISCSI_TCP=m
+# CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -773,6 +774,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # SN Devices
 #
 
+#
+# EDAC - error detection and reporting (RAS)
+#
+
 #
 # File systems
 #

arch/mips/kernel/binfmt_elfn32.c

@@ -103,8 +103,9 @@ jiffies_to_compat_timeval(unsigned long jiffies, struct compat_timeval *value)
 	 * one divide.
 	 */
 	u64 nsec = (u64)jiffies * TICK_NSEC;
-	value->tv_sec = div_long_long_rem(nsec, NSEC_PER_SEC, &value->tv_usec);
-	value->tv_usec /= NSEC_PER_USEC;
+	long rem;
+	value->tv_sec = div_long_long_rem(nsec, NSEC_PER_SEC, &rem);
+	value->tv_usec = rem / NSEC_PER_USEC;
 }
 
 #define ELF_CORE_EFLAGS EF_MIPS_ABI2

arch/mips/kernel/binfmt_elfo32.c

@@ -105,8 +105,9 @@ jiffies_to_compat_timeval(unsigned long jiffies, struct compat_timeval *value)
 	 * one divide.
 	 */
 	u64 nsec = (u64)jiffies * TICK_NSEC;
-	value->tv_sec = div_long_long_rem(nsec, NSEC_PER_SEC, &value->tv_usec);
-	value->tv_usec /= NSEC_PER_USEC;
+	long rem;
+	value->tv_sec = div_long_long_rem(nsec, NSEC_PER_SEC, &rem);
+	value->tv_usec = rem / NSEC_PER_USEC;
 }
 
 #undef ELF_CORE_COPY_REGS

arch/mips/kernel/linux32.c

@@ -230,6 +230,9 @@ sysn32_waitid(int which, compat_pid_t pid,
 	long ret;
 	mm_segment_t old_fs = get_fs();
 
+	if (!access_ok(VERIFY_WRITE, uinfo, sizeof(*uinfo)))
+		return -EFAULT;
+
 	set_fs (KERNEL_DS);
 	ret = sys_waitid(which, pid, uinfo, options,
 			 uru ? (struct rusage __user *) &ru : NULL);
@@ -1450,25 +1453,6 @@ sys32_timer_create(u32 clock, struct sigevent32 __user *se32, timer_t __user *ti
 	return sys_timer_create(clock, p, timer_id);
 }
 
-asmlinkage long
-sysn32_rt_sigtimedwait(const sigset_t __user *uthese,
-		       siginfo_t __user *uinfo,
-		       const struct compat_timespec __user *uts32,
-		       size_t sigsetsize)
-{
-	struct timespec __user *uts = NULL;
-
-	if (uts32) {
-		struct timespec ts;
-		uts = compat_alloc_user_space(sizeof(struct timespec));
-		if (get_user(ts.tv_sec, &uts32->tv_sec) ||
-		    get_user(ts.tv_nsec, &uts32->tv_nsec) ||
-		    copy_to_user (uts, &ts, sizeof (ts)))
-			return -EFAULT;
-	}
-	return sys_rt_sigtimedwait(uthese, uinfo, uts, sigsetsize);
-}
-
 save_static_function(sys32_clone);
 __attribute_used__ noinline static int
 _sys32_clone(nabi_no_regargs struct pt_regs regs)

arch/mips/kernel/scall32-o32.S

@@ -626,7 +626,7 @@ einval:	li	v0, -EINVAL
 	sys	sys_fstatat64		4
 	sys	sys_unlinkat		3
 	sys	sys_renameat		4	/* 4295 */
-	sys	sys_linkat		4
+	sys	sys_linkat		5
 	sys	sys_symlinkat		3
 	sys	sys_readlinkat		4
 	sys	sys_fchmodat		3

arch/mips/kernel/scall64-n32.S

@@ -245,9 +245,9 @@ EXPORT(sysn32_call_table)
 	PTR	sys_capget
 	PTR	sys_capset
 	PTR	sys32_rt_sigpending		/* 6125 */
-	PTR	sysn32_rt_sigtimedwait
+	PTR	compat_sys_rt_sigtimedwait
 	PTR	sys_rt_sigqueueinfo
-	PTR	sys32_rt_sigsuspend
+	PTR	sysn32_rt_sigsuspend
 	PTR	sys32_sigaltstack
 	PTR	compat_sys_utime		/* 6130 */
 	PTR	sys_mknod

arch/mips/kernel/signal32.c

@@ -4,7 +4,7 @@
  * for more details.
  *
  * Copyright (C) 1991, 1992  Linus Torvalds
- * Copyright (C) 1994 - 2000  Ralf Baechle
+ * Copyright (C) 1994 - 2000, 2006  Ralf Baechle
  * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
  */
 #include <linux/cache.h>
@@ -106,8 +106,6 @@ typedef struct compat_siginfo {
 
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
 
-extern int do_signal32(sigset_t *oldset, struct pt_regs *regs);
-
 /* 32-bit compatibility types */
 
 #define _NSIG_BPW32	32
@@ -198,7 +196,7 @@ __attribute_used__ noinline static int
 _sys32_sigsuspend(nabi_no_regargs struct pt_regs regs)
 {
 	compat_sigset_t *uset;
-	sigset_t newset, saveset;
+	sigset_t newset;
 
 	uset = (compat_sigset_t *) regs.regs[4];
 	if (get_sigset(&newset, uset))
@@ -206,19 +204,15 @@ _sys32_sigsuspend(nabi_no_regargs struct pt_regs regs)
 	sigdelsetmask(&newset, ~_BLOCKABLE);
 
 	spin_lock_irq(&current->sighand->siglock);
-	saveset = current->blocked;
+	current->saved_sigmask = current->blocked;
 	current->blocked = newset;
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
 
-	regs.regs[2] = EINTR;
-	regs.regs[7] = 1;
-	while (1) {
-		current->state = TASK_INTERRUPTIBLE;
-		schedule();
-		if (do_signal32(&saveset, &regs))
-			return -EINTR;
-	}
+	current->state = TASK_INTERRUPTIBLE;
+	schedule();
+	set_thread_flag(TIF_RESTORE_SIGMASK);
+	return -ERESTARTNOHAND;
 }
 
 save_static_function(sys32_rt_sigsuspend);
@@ -226,8 +220,8 @@ __attribute_used__ noinline static int
 _sys32_rt_sigsuspend(nabi_no_regargs struct pt_regs regs)
 {
 	compat_sigset_t *uset;
-	sigset_t newset, saveset;
-        size_t sigsetsize;
+	sigset_t newset;
+	size_t sigsetsize;
 
 	/* XXX Don't preclude handling different sized sigset_t's.  */
 	sigsetsize = regs.regs[5];
@@ -240,19 +234,15 @@ _sys32_rt_sigsuspend(nabi_no_regargs struct pt_regs regs)
 	sigdelsetmask(&newset, ~_BLOCKABLE);
 
 	spin_lock_irq(&current->sighand->siglock);
-	saveset = current->blocked;
+	current->saved_sigmask = current->blocked;
 	current->blocked = newset;
         recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
 
-	regs.regs[2] = EINTR;
-	regs.regs[7] = 1;
-	while (1) {
-		current->state = TASK_INTERRUPTIBLE;
-		schedule();
-		if (do_signal32(&saveset, &regs))
-			return -EINTR;
-	}
+	current->state = TASK_INTERRUPTIBLE;
+	schedule();
+	set_thread_flag(TIF_RESTORE_SIGMASK);
+	return -ERESTARTNOHAND;
 }
 
 asmlinkage int sys32_sigaction(int sig, const struct sigaction32 *act,
@@ -783,7 +773,7 @@ static inline int handle_signal(unsigned long sig, siginfo_t *info,
 		regs->regs[2] = EINTR;
 		break;
 	case ERESTARTSYS:
-		if(!(ka->sa.sa_flags & SA_RESTART)) {
+		if (!(ka->sa.sa_flags & SA_RESTART)) {
 			regs->regs[2] = EINTR;
 			break;
 		}
@@ -810,9 +800,10 @@ static inline int handle_signal(unsigned long sig, siginfo_t *info,
 	return ret;
 }
 
-int do_signal32(sigset_t *oldset, struct pt_regs *regs)
+void do_signal32(struct pt_regs *regs)
 {
 	struct k_sigaction ka;
+	sigset_t *oldset;
 	siginfo_t info;
 	int signr;
 
@@ -822,17 +813,30 @@ int do_signal32(sigset_t *oldset, struct pt_regs *regs)
 	 * if so.
 	 */
 	if (!user_mode(regs))
-		return 1;
+		return;
 
 	if (try_to_freeze())
 		goto no_signal;
 
-	if (!oldset)
+	if (test_thread_flag(TIF_RESTORE_SIGMASK))
+		oldset = &current->saved_sigmask;
+	else
 		oldset = &current->blocked;
 
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
-	if (signr > 0)
-		return handle_signal(signr, &info, &ka, oldset, regs);
+	if (signr > 0) {
+		/* Whee! Actually deliver the signal. */
+		if (handle_signal(signr, &info, &ka, oldset, regs) == 0) {
+			/*
+			* A signal was successfully delivered; the saved
+			* sigmask will have been stored in the signal frame,
+			* and will be restored by sigreturn, so we can simply
+			* clear the TIF_RESTORE_SIGMASK flag.
+			*/
+			if (test_thread_flag(TIF_RESTORE_SIGMASK))
+				clear_thread_flag(TIF_RESTORE_SIGMASK);
+		}
+	}
 
 no_signal:
 	/*
@@ -853,7 +857,15 @@ no_signal:
 			regs->cp0_epc -= 4;
 		}
 	}
-	return 0;
+
+	/*
+	* If there's no signal to deliver, we just put the saved sigmask
+	* back
+	*/
+	if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
+		clear_thread_flag(TIF_RESTORE_SIGMASK);
+		sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
+	}
 }
 
 asmlinkage int sys32_rt_sigaction(int sig, const struct sigaction32 *act,

arch/mips/kernel/signal_n32.c

@@ -81,6 +81,39 @@ struct rt_sigframe_n32 {
 #endif
 };
 
+extern void sigset_from_compat (sigset_t *set, compat_sigset_t *compat);
+
+save_static_function(sysn32_rt_sigsuspend);
+__attribute_used__ noinline static int
+_sysn32_rt_sigsuspend(nabi_no_regargs struct pt_regs regs)
+{
+	compat_sigset_t __user *unewset, uset;
+	size_t sigsetsize;
+	sigset_t newset;
+
+	/* XXX Don't preclude handling different sized sigset_t's.  */
+	sigsetsize = regs.regs[5];
+	if (sigsetsize != sizeof(sigset_t))
+		return -EINVAL;
+
+	unewset = (compat_sigset_t __user *) regs.regs[4];
+	if (copy_from_user(&uset, unewset, sizeof(uset)))
+		return -EFAULT;
+	sigset_from_compat (&newset, &uset);
+	sigdelsetmask(&newset, ~_BLOCKABLE);
+
+	spin_lock_irq(&current->sighand->siglock);
+	current->saved_sigmask = current->blocked;
+	current->blocked = newset;
+        recalc_sigpending();
+	spin_unlock_irq(&current->sighand->siglock);
+
+	current->state = TASK_INTERRUPTIBLE;
+	schedule();
+	set_thread_flag(TIF_RESTORE_SIGMASK);
+	return -ERESTARTNOHAND;
+}
+
 save_static_function(sysn32_rt_sigreturn);
 __attribute_used__ noinline static void
 _sysn32_rt_sigreturn(nabi_no_regargs struct pt_regs regs)

arch/mips/kernel/smp.c

@@ -29,6 +29,7 @@
 #include <linux/timex.h>
 #include <linux/sched.h>
 #include <linux/cpumask.h>
+#include <linux/cpu.h>
 
 #include <asm/atomic.h>
 #include <asm/cpu.h>
@@ -424,6 +425,25 @@ void flush_tlb_one(unsigned long vaddr)
 	local_flush_tlb_one(vaddr);
 }
 
+static DEFINE_PER_CPU(struct cpu, cpu_devices);
+
+static int __init topology_init(void)
+{
+	int cpu;
+	int ret;
+
+	for_each_cpu(cpu) {
+		ret = register_cpu(&per_cpu(cpu_devices, cpu), cpu, NULL);
+		if (ret)
+			printk(KERN_WARNING "topology_init: register_cpu %d "
+			       "failed (%d)\n", cpu, ret);
+	}
+
+	return 0;
+}
+
+subsys_initcall(topology_init);
+
 EXPORT_SYMBOL(flush_tlb_page);
 EXPORT_SYMBOL(flush_tlb_one);
 EXPORT_SYMBOL(cpu_data);

arch/mips/kernel/traps.c

@@ -3,7 +3,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 1994 - 1999, 2000, 01 Ralf Baechle
+ * Copyright (C) 1994 - 1999, 2000, 01, 06 Ralf Baechle
  * Copyright (C) 1995, 1996 Paul M. Antoine
  * Copyright (C) 1998 Ulf Carlsson
  * Copyright (C) 1999 Silicon Graphics, Inc.
@@ -548,6 +548,8 @@ asmlinkage void do_ov(struct pt_regs *regs)
 {
 	siginfo_t info;
 
+	die_if_kernel("Integer overflow", regs);
+
 	info.si_code = FPE_INTOVF;
 	info.si_signo = SIGFPE;
 	info.si_errno = 0;

arch/mips/mm/cex-sb1.S

@@ -64,7 +64,7 @@ LEAF(except_vec2_sb1)
 	sd	k0,0x170($0)
 	sd	k1,0x178($0)
 
-#if CONFIG_SB1_CEX_ALWAYS_FATAL
+#ifdef CONFIG_SB1_CEX_ALWAYS_FATAL
 	j	handle_vec2_sb1
 	 nop
 #else

arch/mips/pmc-sierra/yosemite/smp.c

@@ -94,7 +94,7 @@ void __init prom_prepare_cpus(unsigned int max_cpus)
 void prom_boot_secondary(int cpu, struct task_struct *idle)
 {
 	unsigned long gp = (unsigned long) task_thread_info(idle);
-	unsigned long sp = __KSTK_TOP(idle);
+	unsigned long sp = __KSTK_TOS(idle);
 
 	secondary_sp = sp;
 	secondary_gp = gp;

arch/mips/sibyte/Kconfig

@@ -102,11 +102,11 @@ config SIMULATION
 	  Build a kernel suitable for running under the GDB simulator.
 	  Primarily adjusts the kernel's notion of time.
 
-config CONFIG_SB1_CEX_ALWAYS_FATAL
+config SB1_CEX_ALWAYS_FATAL
 	bool "All cache exceptions considered fatal (no recovery attempted)"
 	depends on SIBYTE_SB1xxx_SOC
 
-config CONFIG_SB1_CERR_STALL
+config SB1_CERR_STALL
 	bool "Stall (rather than panic) on fatal cache error"
 	depends on SIBYTE_SB1xxx_SOC
 

arch/mips/sibyte/bcm1480/irq.c

@@ -139,7 +139,7 @@ void bcm1480_unmask_irq(int cpu, int irq)
 #ifdef CONFIG_SMP
 static void bcm1480_set_affinity(unsigned int irq, cpumask_t mask)
 {
-	int i = 0, old_cpu, cpu, int_on;
+	int i = 0, old_cpu, cpu, int_on, k;
 	u64 cur_ints;
 	irq_desc_t *desc = irq_desc + irq;
 	unsigned long flags;
@@ -165,7 +165,6 @@ static void bcm1480_set_affinity(unsigned int irq, cpumask_t mask)
 		irq_dirty -= BCM1480_NR_IRQS_HALF;
 	}
 
-	int k;
 	for (k=0; k<2; k++) { /* Loop through high and low interrupt mask register */
 		cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(old_cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
 		int_on = !(cur_ints & (((u64) 1) << irq_dirty));
@@ -216,6 +215,7 @@ static void ack_bcm1480_irq(unsigned int irq)
 {
 	u64 pending;
 	unsigned int irq_dirty;
+	int k;
 
 	/*
 	 * If the interrupt was an HT interrupt, now is the time to
@@ -227,7 +227,6 @@ static void ack_bcm1480_irq(unsigned int irq)
 	if ((irq_dirty >= BCM1480_NR_IRQS_HALF) && (irq_dirty <= BCM1480_NR_IRQS)) {
 		irq_dirty -= BCM1480_NR_IRQS_HALF;
 	}
-	int k;
 	for (k=0; k<2; k++) { /* Loop through high and low LDT interrupts */
 		pending = __raw_readq(IOADDR(A_BCM1480_IMR_REGISTER(bcm1480_irq_owner[irq],
 						R_BCM1480_IMR_LDT_INTERRUPT_H + (k*BCM1480_IMR_HL_SPACING))));

arch/powerpc/Kconfig

@@ -963,7 +963,7 @@ source "arch/powerpc/oprofile/Kconfig"
 
 config KPROBES
 	bool "Kprobes (EXPERIMENTAL)"
-	depends on PPC64
+	depends on PPC64 && EXPERIMENTAL && MODULES
 	help
 	  Kprobes allows you to trap at almost any kernel address and
 	  execute a callback function.  register_kprobe() establishes

arch/powerpc/configs/g5_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc5
-# Tue Dec 20 15:59:30 2005
+# Linux kernel version: 2.6.16-rc2
+# Fri Feb 10 17:33:08 2006
 #
 CONFIG_PPC64=y
 CONFIG_64BIT=y
@@ -16,6 +16,10 @@ CONFIG_COMPAT=y
 CONFIG_SYSVIPC_COMPAT=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+# CONFIG_PPC_UDBG_16550 is not set
+CONFIG_GENERIC_TBSYNC=y
+# CONFIG_DEFAULT_UIMAGE is not set
 
 #
 # Processor support
@@ -26,13 +30,12 @@ CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_SMP=y
-CONFIG_NR_CPUS=2
+CONFIG_NR_CPUS=4
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -47,8 +50,6 @@ CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
@@ -58,8 +59,10 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -68,8 +71,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -112,13 +117,12 @@ CONFIG_PPC_PMAC=y
 CONFIG_PPC_PMAC64=y
 # CONFIG_PPC_MAPLE is not set
 # CONFIG_PPC_CELL is not set
-CONFIG_PPC_OF=y
 CONFIG_U3_DART=y
 CONFIG_MPIC=y
 # CONFIG_PPC_RTAS is not set
 # CONFIG_MMIO_NVRAM is not set
+CONFIG_MPIC_BROKEN_U3=y
 # CONFIG_PPC_MPC106 is not set
-CONFIG_GENERIC_TBSYNC=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_TABLE=y
 # CONFIG_CPU_FREQ_DEBUG is not set
@@ -151,6 +155,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_IOMMU_VMERGE=y
 # CONFIG_HOTPLUG_CPU is not set
 CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
 # CONFIG_NUMA is not set
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
@@ -202,6 +207,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -239,6 +245,7 @@ CONFIG_NETFILTER=y
 # Core Netfilter Configuration
 #
 # CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_XTABLES is not set
 
 #
 # IP: Netfilter Configuration
@@ -255,65 +262,6 @@ CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
 # CONFIG_IP_NF_PPTP is not set
 CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-# CONFIG_IP_NF_MATCH_DCCP is not set
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_CONNBYTES=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_STRING=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_TARGET_NFQUEUE=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
 
 #
 # DCCP Configuration (EXPERIMENTAL)
@@ -324,6 +272,11 @@ CONFIG_IP_NF_ARP_MANGLE=m
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -342,7 +295,6 @@ CONFIG_LLC=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
 
 #
 # Network testing
@@ -545,13 +497,7 @@ CONFIG_SCSI_SATA_SVW=y
 # CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -614,7 +560,6 @@ CONFIG_IEEE1394_SBP2=m
 CONFIG_IEEE1394_ETH1394=m
 CONFIG_IEEE1394_DV1394=m
 CONFIG_IEEE1394_RAWIO=y
-# CONFIG_IEEE1394_CMP is not set
 
 #
 # I2O device support
@@ -630,6 +575,7 @@ CONFIG_THERM_PM72=y
 CONFIG_WINDFARM=y
 CONFIG_WINDFARM_PM81=y
 CONFIG_WINDFARM_PM91=y
+CONFIG_WINDFARM_PM112=y
 
 #
 # Network device support
@@ -682,8 +628,9 @@ CONFIG_E1000=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
-CONFIG_TIGON3=m
+CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
 # CONFIG_MV643XX_ETH is not set
 
@@ -861,8 +808,7 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_KEYWEST=y
-CONFIG_I2C_PMAC_SMU=y
+CONFIG_I2C_POWERMAC=y
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
@@ -894,6 +840,12 @@ CONFIG_I2C_PMAC_SMU=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -961,7 +913,6 @@ CONFIG_FB_RADEON_I2C=y
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_VIRTUAL is not set
 
@@ -1008,9 +959,10 @@ CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
 CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-CONFIG_SND_GENERIC_DRIVER=y
 
 #
 # Generic devices
@@ -1024,6 +976,8 @@ CONFIG_SND_GENERIC_DRIVER=y
 #
 # PCI devices
 #
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS4000 is not set
 # CONFIG_SND_ALI5451 is not set
 # CONFIG_SND_ATIIXP is not set
 # CONFIG_SND_ATIIXP_MODEM is not set
@@ -1032,39 +986,38 @@ CONFIG_SND_GENERIC_DRIVER=y
 # CONFIG_SND_AU8830 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
-# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
 # CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
 # CONFIG_SND_EMU10K1 is not set
 # CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_CMIPCI is not set
 # CONFIG_SND_ENS1370 is not set
 # CONFIG_SND_ENS1371 is not set
 # CONFIG_SND_ES1938 is not set
 # CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
 # CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
 # CONFIG_SND_ICE1712 is not set
 # CONFIG_SND_ICE1724 is not set
 # CONFIG_SND_INTEL8X0 is not set
 # CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
 # CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
 # CONFIG_SND_VIA82XX is not set
 # CONFIG_SND_VIA82XX_MODEM is not set
 # CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_YMFPCI is not set
 
 #
 # ALSA PowerMac devices
@@ -1136,13 +1089,16 @@ CONFIG_USB_STORAGE_DPCM=y
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
+# CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=y
 CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
 CONFIG_HID_FF=y
 CONFIG_HID_PID=y
 CONFIG_LOGITECH_FF=y
@@ -1159,6 +1115,7 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
 
@@ -1207,6 +1164,7 @@ CONFIG_USB_SERIAL_GENERIC=y
 # CONFIG_USB_SERIAL_AIRPRIME is not set
 # CONFIG_USB_SERIAL_ANYDATA is not set
 CONFIG_USB_SERIAL_BELKIN=m
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
 CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
 # CONFIG_USB_SERIAL_CP2101 is not set
 CONFIG_USB_SERIAL_CYPRESS_M8=m
@@ -1287,6 +1245,10 @@ CONFIG_USB_EZUSB=y
 # SN Devices
 #
 
+#
+# EDAC - error detection and reporting (RAS)
+#
+
 #
 # File systems
 #
@@ -1317,6 +1279,7 @@ CONFIG_XFS_EXPORT=y
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
 # CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -1357,6 +1320,7 @@ CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
 # CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1426,6 +1390,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SGI_PARTITION is not set
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 
 #
@@ -1481,10 +1446,6 @@ CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
 
 #
 # Instrumentation Support
@@ -1497,24 +1458,31 @@ CONFIG_OPROFILE=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=17
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUGGER is not set
 CONFIG_IRQSTACKS=y
 CONFIG_BOOTX_TEXT=y
+# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
+# CONFIG_PPC_EARLY_DEBUG_G5 is not set
+# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
+# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
+# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
 
 #
 # Security options

arch/powerpc/configs/ppc64_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc5
-# Tue Dec 20 15:59:38 2005
+# Linux kernel version: 2.6.16-rc2
+# Fri Feb 10 17:32:14 2006
 #
 CONFIG_PPC64=y
 CONFIG_64BIT=y
@@ -16,6 +16,10 @@ CONFIG_COMPAT=y
 CONFIG_SYSVIPC_COMPAT=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_PPC_UDBG_16550=y
+CONFIG_GENERIC_TBSYNC=y
+# CONFIG_DEFAULT_UIMAGE is not set
 
 #
 # Processor support
@@ -33,7 +37,6 @@ CONFIG_NR_CPUS=32
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -48,8 +51,6 @@ CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_CPUSETS=y
@@ -59,8 +60,10 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -69,8 +72,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -113,7 +118,6 @@ CONFIG_PPC_PMAC=y
 CONFIG_PPC_PMAC64=y
 CONFIG_PPC_MAPLE=y
 # CONFIG_PPC_CELL is not set
-CONFIG_PPC_OF=y
 CONFIG_XICS=y
 CONFIG_U3_DART=y
 CONFIG_MPIC=y
@@ -124,8 +128,8 @@ CONFIG_RTAS_FLASH=m
 # CONFIG_MMIO_NVRAM is not set
 CONFIG_MPIC_BROKEN_U3=y
 CONFIG_IBMVIO=y
+# CONFIG_IBMEBUS is not set
 # CONFIG_PPC_MPC106 is not set
-CONFIG_GENERIC_TBSYNC=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_TABLE=y
 # CONFIG_CPU_FREQ_DEBUG is not set
@@ -158,6 +162,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_IOMMU_VMERGE=y
 CONFIG_HOTPLUG_CPU=y
 CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
 CONFIG_PPC_SPLPAR=y
 CONFIG_EEH=y
@@ -178,6 +183,7 @@ CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_EXTREME=y
 # CONFIG_MEMORY_HOTPLUG is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_PPC_64K_PAGES is not set
 # CONFIG_SCHED_SMT is not set
 CONFIG_PROC_DEVICETREE=y
@@ -221,6 +227,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -260,6 +267,7 @@ CONFIG_NETFILTER=y
 CONFIG_NETFILTER_NETLINK=y
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NETFILTER_XTABLES is not set
 
 #
 # IP: Netfilter Configuration
@@ -277,65 +285,6 @@ CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
 # CONFIG_IP_NF_PPTP is not set
 CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-CONFIG_IP_NF_MATCH_DCCP=m
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_CONNBYTES=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_STRING=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_TARGET_NFQUEUE=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
 
 #
 # DCCP Configuration (EXPERIMENTAL)
@@ -346,6 +295,11 @@ CONFIG_IP_NF_ARP_MANGLE=m
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -364,7 +318,6 @@ CONFIG_LLC=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
 
 #
 # Network testing
@@ -572,13 +525,7 @@ CONFIG_SCSI_IPR_TRACE=y
 CONFIG_SCSI_IPR_DUMP=y
 # CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-CONFIG_SCSI_QLA21XX=m
-CONFIG_SCSI_QLA22XX=m
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-CONFIG_SCSI_QLA6312=m
-CONFIG_SCSI_QLA24XX=m
+# CONFIG_SCSI_QLA_FC is not set
 CONFIG_SCSI_LPFC=m
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -642,8 +589,6 @@ CONFIG_IEEE1394_SBP2=m
 CONFIG_IEEE1394_ETH1394=m
 CONFIG_IEEE1394_DV1394=m
 CONFIG_IEEE1394_RAWIO=y
-CONFIG_IEEE1394_CMP=m
-CONFIG_IEEE1394_AMDTP=m
 
 #
 # I2O device support
@@ -659,6 +604,7 @@ CONFIG_THERM_PM72=y
 CONFIG_WINDFARM=y
 CONFIG_WINDFARM_PM81=y
 CONFIG_WINDFARM_PM91=y
+CONFIG_WINDFARM_PM112=y
 
 #
 # Network device support
@@ -731,6 +677,7 @@ CONFIG_E1000=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
@@ -853,6 +800,7 @@ CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -880,6 +828,7 @@ CONFIG_HVCS=m
 # CONFIG_WATCHDOG is not set
 # CONFIG_RTC is not set
 CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -923,8 +872,7 @@ CONFIG_I2C_AMD8111=y
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_KEYWEST=y
-CONFIG_I2C_PMAC_SMU=y
+CONFIG_I2C_POWERMAC=y
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
@@ -956,6 +904,12 @@ CONFIG_I2C_PMAC_SMU=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -1028,7 +982,6 @@ CONFIG_FB_RADEON_I2C=y
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_VIRTUAL is not set
 
@@ -1073,9 +1026,10 @@ CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
 CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-CONFIG_SND_GENERIC_DRIVER=y
 
 #
 # Generic devices
@@ -1089,6 +1043,8 @@ CONFIG_SND_GENERIC_DRIVER=y
 #
 # PCI devices
 #
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS4000 is not set
 # CONFIG_SND_ALI5451 is not set
 # CONFIG_SND_ATIIXP is not set
 # CONFIG_SND_ATIIXP_MODEM is not set
@@ -1097,39 +1053,38 @@ CONFIG_SND_GENERIC_DRIVER=y
 # CONFIG_SND_AU8830 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
-# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
 # CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
 # CONFIG_SND_EMU10K1 is not set
 # CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_CMIPCI is not set
 # CONFIG_SND_ENS1370 is not set
 # CONFIG_SND_ENS1371 is not set
 # CONFIG_SND_ES1938 is not set
 # CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
 # CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
 # CONFIG_SND_ICE1712 is not set
 # CONFIG_SND_ICE1724 is not set
 # CONFIG_SND_INTEL8X0 is not set
 # CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
 # CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
 # CONFIG_SND_VIA82XX is not set
 # CONFIG_SND_VIA82XX_MODEM is not set
 # CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_YMFPCI is not set
 
 #
 # ALSA PowerMac devices
@@ -1201,13 +1156,16 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=y
 CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
 # CONFIG_HID_FF is not set
 CONFIG_USB_HIDDEV=y
 # CONFIG_USB_AIPTEK is not set
@@ -1221,6 +1179,7 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
 
@@ -1306,6 +1265,10 @@ CONFIG_INFINIBAND_IPOIB=m
 # SN Devices
 #
 
+#
+# EDAC - error detection and reporting (RAS)
+#
+
 #
 # File systems
 #
@@ -1340,6 +1303,7 @@ CONFIG_XFS_EXPORT=y
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
 # CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -1379,6 +1343,7 @@ CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
 # CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1449,6 +1414,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SGI_PARTITION is not set
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 
 #
@@ -1504,10 +1470,6 @@ CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
 
 #
 # Instrumentation Support
@@ -1520,18 +1482,20 @@ CONFIG_OPROFILE=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=17
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
@@ -1540,6 +1504,11 @@ CONFIG_XMON=y
 # CONFIG_XMON_DEFAULT is not set
 CONFIG_IRQSTACKS=y
 CONFIG_BOOTX_TEXT=y
+# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
+# CONFIG_PPC_EARLY_DEBUG_G5 is not set
+# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
+# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
+# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
 
 #
 # Security options

arch/powerpc/configs/pseries_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc5
-# Tue Dec 20 15:59:40 2005
+# Linux kernel version: 2.6.16-rc2
+# Fri Feb 10 17:33:32 2006
 #
 CONFIG_PPC64=y
 CONFIG_64BIT=y
@@ -16,6 +16,10 @@ CONFIG_COMPAT=y
 CONFIG_SYSVIPC_COMPAT=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+# CONFIG_DEFAULT_UIMAGE is not set
 
 #
 # Processor support
@@ -33,7 +37,6 @@ CONFIG_NR_CPUS=128
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -49,8 +52,6 @@ CONFIG_POSIX_MQUEUE=y
 CONFIG_SYSCTL=y
 CONFIG_AUDIT=y
 CONFIG_AUDITSYSCALL=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_CPUSETS=y
@@ -60,8 +61,10 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -70,8 +73,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -113,7 +118,6 @@ CONFIG_PPC_PSERIES=y
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_MAPLE is not set
 # CONFIG_PPC_CELL is not set
-CONFIG_PPC_OF=y
 CONFIG_XICS=y
 # CONFIG_U3_DART is not set
 CONFIG_MPIC=y
@@ -123,8 +127,8 @@ CONFIG_RTAS_PROC=y
 CONFIG_RTAS_FLASH=m
 # CONFIG_MMIO_NVRAM is not set
 CONFIG_IBMVIO=y
+# CONFIG_IBMEBUS is not set
 # CONFIG_PPC_MPC106 is not set
-# CONFIG_GENERIC_TBSYNC is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_WANT_EARLY_SERIAL is not set
 
@@ -145,6 +149,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_IOMMU_VMERGE=y
 CONFIG_HOTPLUG_CPU=y
 CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
 CONFIG_PPC_SPLPAR=y
 CONFIG_EEH=y
@@ -165,6 +170,7 @@ CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_EXTREME=y
 # CONFIG_MEMORY_HOTPLUG is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
 # CONFIG_PPC_64K_PAGES is not set
 CONFIG_SCHED_SMT=y
@@ -209,6 +215,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -248,6 +255,7 @@ CONFIG_NETFILTER=y
 CONFIG_NETFILTER_NETLINK=y
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NETFILTER_XTABLES is not set
 
 #
 # IP: Netfilter Configuration
@@ -265,65 +273,6 @@ CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
 # CONFIG_IP_NF_PPTP is not set
 CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-# CONFIG_IP_NF_MATCH_DCCP is not set
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_CONNBYTES=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_STRING=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_TARGET_NFQUEUE=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
 
 #
 # DCCP Configuration (EXPERIMENTAL)
@@ -334,6 +283,11 @@ CONFIG_IP_NF_ARP_MANGLE=m
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -352,7 +306,6 @@ CONFIG_LLC=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
 
 #
 # Network testing
@@ -550,13 +503,7 @@ CONFIG_SCSI_IPR_TRACE=y
 CONFIG_SCSI_IPR_DUMP=y
 # CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-CONFIG_SCSI_QLA21XX=m
-CONFIG_SCSI_QLA22XX=m
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-CONFIG_SCSI_QLA6312=m
-CONFIG_SCSI_QLA24XX=m
+# CONFIG_SCSI_QLA_FC is not set
 CONFIG_SCSI_LPFC=m
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -678,6 +625,7 @@ CONFIG_E1000=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
@@ -803,6 +751,7 @@ CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -908,6 +857,12 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -976,7 +931,6 @@ CONFIG_FB_RADEON_I2C=y
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_VIRTUAL is not set
 
@@ -1061,12 +1015,15 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=y
 CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
 # CONFIG_HID_FF is not set
 CONFIG_USB_HIDDEV=y
 # CONFIG_USB_AIPTEK is not set
@@ -1080,6 +1037,7 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
 
@@ -1166,6 +1124,10 @@ CONFIG_INFINIBAND_IPOIB=m
 # SN Devices
 #
 
+#
+# EDAC - error detection and reporting (RAS)
+#
+
 #
 # File systems
 #
@@ -1200,6 +1162,7 @@ CONFIG_XFS_EXPORT=y
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
 # CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -1240,6 +1203,7 @@ CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
 # CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1351,10 +1315,6 @@ CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
 
 #
 # Instrumentation Support
@@ -1367,18 +1327,20 @@ CONFIG_OPROFILE=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=17
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
@@ -1387,6 +1349,11 @@ CONFIG_XMON=y
 CONFIG_XMON_DEFAULT=y
 CONFIG_IRQSTACKS=y
 # CONFIG_BOOTX_TEXT is not set
+# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
+# CONFIG_PPC_EARLY_DEBUG_G5 is not set
+# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
+# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
+# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
 
 #
 # Security options

arch/powerpc/kernel/crash.c

@@ -134,8 +134,10 @@ static void crash_kexec_prepare_cpus(void)
 	 * the crash CPU will send an IPI and wait for other CPUs to
 	 * respond. If not, proceed the kexec boot even though we failed to
 	 * capture other CPU states.
+	 * Delay of at least 10 seconds.
 	 */
-	msecs = 1000000;
+	printk(KERN_ALERT "Sending IPI to other cpus...\n");
+	msecs = 10000;
 	while ((atomic_read(&waiting_for_crash_ipi) > 0) && (--msecs > 0)) {
 		barrier();
 		mdelay(1);

arch/powerpc/kernel/head_32.S

@@ -714,6 +714,7 @@ AltiVecUnavailable:
 #ifdef CONFIG_ALTIVEC
 	bne	load_up_altivec		/* if from user, just load it up */
 #endif /* CONFIG_ALTIVEC */
+	addi	r3,r1,STACK_FRAME_OVERHEAD
 	EXC_XFER_EE_LITE(0xf20, altivec_unavailable_exception)
 
 PerformanceMonitor:

arch/powerpc/kernel/head_64.S

@@ -139,7 +139,7 @@ _GLOBAL(__secondary_hold)
 	ori	r24,r24,MSR_RI
 	mtmsrd	r24			/* RI on */
 
-	/* Grab our linux cpu number */
+	/* Grab our physical cpu number */
 	mr	r24,r3
 
 	/* Tell the master cpu we're here */
@@ -153,12 +153,7 @@ _GLOBAL(__secondary_hold)
 	cmpdi	0,r4,1
 	bne	100b
 
-#ifdef CONFIG_HMT
-	SET_REG_IMMEDIATE(r4, .hmt_init)
-	mtctr	r4
-	bctr
-#else
-#ifdef CONFIG_SMP
+#if defined(CONFIG_SMP) || defined(CONFIG_KEXEC)
 	LOAD_REG_IMMEDIATE(r4, .pSeries_secondary_smp_init)
 	mtctr	r4
 	mr	r3,r24
@@ -166,7 +161,6 @@ _GLOBAL(__secondary_hold)
 #else
 	BUG_OPCODE
 #endif
-#endif
 
 /* This value is used to mark exception frames on the stack. */
 	.section ".toc","aw"
@@ -321,7 +315,6 @@ exception_marker:
 label##_pSeries:					\
 	HMT_MEDIUM;					\
 	mtspr	SPRN_SPRG1,r13;		/* save r13 */	\
-	RUNLATCH_ON(r13);				\
 	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
 
 #define STD_EXCEPTION_ISERIES(n, label, area)		\
@@ -329,7 +322,6 @@ label##_pSeries:					\
 label##_iSeries:					\
 	HMT_MEDIUM;					\
 	mtspr	SPRN_SPRG1,r13;		/* save r13 */	\
-	RUNLATCH_ON(r13);				\
 	EXCEPTION_PROLOG_ISERIES_1(area);		\
 	EXCEPTION_PROLOG_ISERIES_2;			\
 	b	label##_common
@@ -339,7 +331,6 @@ label##_iSeries:					\
 label##_iSeries:							\
 	HMT_MEDIUM;							\
 	mtspr	SPRN_SPRG1,r13;		/* save r13 */			\
-	RUNLATCH_ON(r13);						\
 	EXCEPTION_PROLOG_ISERIES_1(PACA_EXGEN);				\
 	lbz	r10,PACAPROCENABLED(r13);				\
 	cmpwi	0,r10,0;						\
@@ -392,6 +383,7 @@ label##_common:						\
 label##_common:						\
 	EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN);	\
 	DISABLE_INTS;					\
+	bl	.ppc64_runlatch_on;			\
 	addi	r3,r1,STACK_FRAME_OVERHEAD;		\
 	bl	hdlr;					\
 	b	.ret_from_except_lite
@@ -409,7 +401,6 @@ __start_interrupts:
 _machine_check_pSeries:
 	HMT_MEDIUM
 	mtspr	SPRN_SPRG1,r13		/* save r13 */
-	RUNLATCH_ON(r13)
 	EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
 
 	. = 0x300
@@ -436,7 +427,6 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
 data_access_slb_pSeries:
 	HMT_MEDIUM
 	mtspr	SPRN_SPRG1,r13
-	RUNLATCH_ON(r13)
 	mfspr	r13,SPRN_SPRG3		/* get paca address into r13 */
 	std	r3,PACA_EXSLB+EX_R3(r13)
 	mfspr	r3,SPRN_DAR
@@ -462,7 +452,6 @@ data_access_slb_pSeries:
 instruction_access_slb_pSeries:
 	HMT_MEDIUM
 	mtspr	SPRN_SPRG1,r13
-	RUNLATCH_ON(r13)
 	mfspr	r13,SPRN_SPRG3		/* get paca address into r13 */
 	std	r3,PACA_EXSLB+EX_R3(r13)
 	mfspr	r3,SPRN_SRR0		/* SRR0 is faulting address */
@@ -493,7 +482,6 @@ instruction_access_slb_pSeries:
 	.globl	system_call_pSeries
 system_call_pSeries:
 	HMT_MEDIUM
-	RUNLATCH_ON(r9)
 	mr	r9,r13
 	mfmsr	r10
 	mfspr	r13,SPRN_SPRG3
@@ -577,7 +565,6 @@ slb_miss_user_pseries:
 system_reset_fwnmi:
 	HMT_MEDIUM
 	mtspr	SPRN_SPRG1,r13		/* save r13 */
-	RUNLATCH_ON(r13)
 	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common)
 
 	.globl machine_check_fwnmi
@@ -585,7 +572,6 @@ system_reset_fwnmi:
 machine_check_fwnmi:
 	HMT_MEDIUM
 	mtspr	SPRN_SPRG1,r13		/* save r13 */
-	RUNLATCH_ON(r13)
 	EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
 
 #ifdef CONFIG_PPC_ISERIES
@@ -896,7 +882,6 @@ unrecov_fer:
 	.align	7
 	.globl data_access_common
 data_access_common:
-	RUNLATCH_ON(r10)		/* It wont fit in the 0x300 handler */
 	mfspr	r10,SPRN_DAR
 	std	r10,PACA_EXGEN+EX_DAR(r13)
 	mfspr	r10,SPRN_DSISR
@@ -1044,6 +1029,7 @@ hardware_interrupt_common:
 	EXCEPTION_PROLOG_COMMON(0x500, PACA_EXGEN)
 hardware_interrupt_entry:
 	DISABLE_INTS
+	bl	.ppc64_runlatch_on
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	.do_IRQ
 	b	.ret_from_except_lite
@@ -1818,22 +1804,6 @@ _STATIC(start_here_multiplatform)
 	ori	r6,r6,MSR_RI
 	mtmsrd	r6			/* RI on */
 
-#ifdef CONFIG_HMT
-	/* Start up the second thread on cpu 0 */
-	mfspr	r3,SPRN_PVR
-	srwi	r3,r3,16
-	cmpwi	r3,0x34			/* Pulsar  */
-	beq	90f
-	cmpwi	r3,0x36			/* Icestar */
-	beq	90f
-	cmpwi	r3,0x37			/* SStar   */
-	beq	90f
-	b	91f			/* HMT not supported */
-90:	li	r3,0
-	bl	.hmt_start_secondary
-91:
-#endif
-
 	/* The following gets the stack and TOC set up with the regs */
 	/* pointing to the real addr of the kernel stack.  This is   */
 	/* all done to support the C function call below which sets  */
@@ -1947,77 +1917,8 @@ _STATIC(start_here_common)
 
 	bl .start_kernel
 
-_GLOBAL(hmt_init)
-#ifdef CONFIG_HMT
-	LOAD_REG_IMMEDIATE(r5, hmt_thread_data)
-	mfspr	r7,SPRN_PVR
-	srwi	r7,r7,16
-	cmpwi	r7,0x34			/* Pulsar  */
-	beq	90f
-	cmpwi	r7,0x36			/* Icestar */
-	beq	91f
-	cmpwi	r7,0x37			/* SStar   */
-	beq	91f
-	b	101f
-90:	mfspr	r6,SPRN_PIR
-	andi.	r6,r6,0x1f
-	b	92f
-91:	mfspr	r6,SPRN_PIR
-	andi.	r6,r6,0x3ff
-92:	sldi	r4,r24,3
-	stwx	r6,r5,r4
-	bl	.hmt_start_secondary
-	b	101f
-
-__hmt_secondary_hold:
-	LOAD_REG_IMMEDIATE(r5, hmt_thread_data)
-	clrldi	r5,r5,4
-	li	r7,0
-	mfspr	r6,SPRN_PIR
-	mfspr	r8,SPRN_PVR
-	srwi	r8,r8,16
-	cmpwi	r8,0x34
-	bne	93f
-	andi.	r6,r6,0x1f
-	b	103f
-93:	andi.	r6,r6,0x3f
-
-103:	lwzx	r8,r5,r7
-	cmpw	r8,r6
-	beq	104f
-	addi	r7,r7,8
-	b	103b
-
-104:	addi	r7,r7,4
-	lwzx	r9,r5,r7
-	mr	r24,r9
-101:
-#endif
-	mr	r3,r24
-	b	.pSeries_secondary_smp_init
-
-#ifdef CONFIG_HMT
-_GLOBAL(hmt_start_secondary)
-	LOAD_REG_IMMEDIATE(r4,__hmt_secondary_hold)
-	clrldi	r4,r4,4
-	mtspr	SPRN_NIADORM, r4
-	mfspr	r4, SPRN_MSRDORM
-	li	r5, -65
-	and	r4, r4, r5
-	mtspr	SPRN_MSRDORM, r4
-	lis	r4,0xffef
-	ori	r4,r4,0x7403
-	mtspr	SPRN_TSC, r4
-	li	r4,0x1f4
-	mtspr	SPRN_TST, r4
-	mfspr	r4, SPRN_HID0
-	ori	r4, r4, 0x1
-	mtspr	SPRN_HID0, r4
-	mfspr	r4, SPRN_CTRLF
-	oris	r4, r4, 0x40
-	mtspr	SPRN_CTRLT, r4
-	blr
-#endif
+	/* Not reached */
+	BUG_OPCODE
 
 /*
  * We put a few things here that have to be page-aligned.

arch/powerpc/kernel/lparcfg.c

@@ -341,7 +341,7 @@ static int lparcfg_data(struct seq_file *m, void *v)
 	const char *system_id = "";
 	unsigned int *lp_index_ptr, lp_index = 0;
 	struct device_node *rtas_node;
-	int *lrdrp;
+	int *lrdrp = NULL;
 
 	rootdn = find_path_device("/");
 	if (rootdn) {
@@ -362,7 +362,9 @@ static int lparcfg_data(struct seq_file *m, void *v)
 	seq_printf(m, "partition_id=%d\n", (int)lp_index);
 
 	rtas_node = find_path_device("/rtas");
-	lrdrp = (int *)get_property(rtas_node, "ibm,lrdr-capacity", NULL);
+	if (rtas_node)
+		lrdrp = (int *)get_property(rtas_node, "ibm,lrdr-capacity",
+		                            NULL);
 
 	if (lrdrp == NULL) {
 		partition_potential_processors = vdso_data->processorCount;

arch/powerpc/kernel/machine_kexec_64.c

@@ -26,8 +26,6 @@
 #include <asm/prom.h>
 #include <asm/smp.h>
 
-#define HASH_GROUP_SIZE 0x80	/* size of each hash group, asm/mmu.h */
-
 int default_machine_kexec_prepare(struct kimage *image)
 {
 	int i;
@@ -61,7 +59,7 @@ int default_machine_kexec_prepare(struct kimage *image)
 	 */
 	if (htab_address) {
 		low = __pa(htab_address);
-		high = low + (htab_hash_mask + 1) * HASH_GROUP_SIZE;
+		high = low + htab_size_bytes;
 
 		for (i = 0; i < image->nr_segments; i++) {
 			begin = image->segment[i].mem;
@@ -294,7 +292,7 @@ void default_machine_kexec(struct kimage *image)
 }
 
 /* Values we need to export to the second kernel via the device tree. */
-static unsigned long htab_base, htab_size, kernel_end;
+static unsigned long htab_base, kernel_end;
 
 static struct property htab_base_prop = {
 	.name = "linux,htab-base",
@@ -305,7 +303,7 @@ static struct property htab_base_prop = {
 static struct property htab_size_prop = {
 	.name = "linux,htab-size",
 	.length = sizeof(unsigned long),
-	.value = (unsigned char *)&htab_size,
+	.value = (unsigned char *)&htab_size_bytes,
 };
 
 static struct property kernel_end_prop = {
@@ -331,8 +329,6 @@ static void __init export_htab_values(void)
 
 	htab_base = __pa(htab_address);
 	prom_add_property(node, &htab_base_prop);
-
-	htab_size = 1UL << ppc64_pft_size;
 	prom_add_property(node, &htab_size_prop);
 
  out:

arch/powerpc/kernel/ppc_ksyms.c

@@ -79,15 +79,8 @@ EXPORT_SYMBOL(sys_sigreturn);
 EXPORT_SYMBOL(strcpy);
 EXPORT_SYMBOL(strncpy);
 EXPORT_SYMBOL(strcat);
-EXPORT_SYMBOL(strncat);
-EXPORT_SYMBOL(strchr);
-EXPORT_SYMBOL(strrchr);
-EXPORT_SYMBOL(strpbrk);
-EXPORT_SYMBOL(strstr);
 EXPORT_SYMBOL(strlen);
-EXPORT_SYMBOL(strnlen);
 EXPORT_SYMBOL(strcmp);
-EXPORT_SYMBOL(strncmp);
 EXPORT_SYMBOL(strcasecmp);
 
 EXPORT_SYMBOL(csum_partial);
@@ -185,9 +178,6 @@ EXPORT_SYMBOL(adb_try_handler_change);
 EXPORT_SYMBOL(cuda_request);
 EXPORT_SYMBOL(cuda_poll);
 #endif /* CONFIG_ADB_CUDA */
-#ifdef CONFIG_PPC_PMAC
-EXPORT_SYMBOL(sys_ctrler);
-#endif
 #ifdef CONFIG_VT
 EXPORT_SYMBOL(kd_mksound);
 #endif
@@ -205,7 +195,6 @@ EXPORT_SYMBOL(__lshrdi3);
 EXPORT_SYMBOL(memcpy);
 EXPORT_SYMBOL(memset);
 EXPORT_SYMBOL(memmove);
-EXPORT_SYMBOL(memscan);
 EXPORT_SYMBOL(memcmp);
 EXPORT_SYMBOL(memchr);
 
@@ -214,7 +203,6 @@ EXPORT_SYMBOL(screen_info);
 #endif
 
 #ifdef CONFIG_PPC32
-EXPORT_SYMBOL(__delay);
 EXPORT_SYMBOL(timer_interrupt);
 EXPORT_SYMBOL(irq_desc);
 EXPORT_SYMBOL(tb_ticks_per_jiffy);
@@ -222,10 +210,6 @@ EXPORT_SYMBOL(console_drivers);
 EXPORT_SYMBOL(cacheable_memcpy);
 #endif
 
-EXPORT_SYMBOL(__up);
-EXPORT_SYMBOL(__down);
-EXPORT_SYMBOL(__down_interruptible);
-
 #ifdef  CONFIG_8xx
 EXPORT_SYMBOL(cpm_install_handler);
 EXPORT_SYMBOL(cpm_free_handler);

arch/powerpc/kernel/process.c

@@ -888,3 +888,35 @@ void dump_stack(void)
 	show_stack(current, NULL);
 }
 EXPORT_SYMBOL(dump_stack);
+
+#ifdef CONFIG_PPC64
+void ppc64_runlatch_on(void)
+{
+	unsigned long ctrl;
+
+	if (cpu_has_feature(CPU_FTR_CTRL) && !test_thread_flag(TIF_RUNLATCH)) {
+		HMT_medium();
+
+		ctrl = mfspr(SPRN_CTRLF);
+		ctrl |= CTRL_RUNLATCH;
+		mtspr(SPRN_CTRLT, ctrl);
+
+		set_thread_flag(TIF_RUNLATCH);
+	}
+}
+
+void ppc64_runlatch_off(void)
+{
+	unsigned long ctrl;
+
+	if (cpu_has_feature(CPU_FTR_CTRL) && test_thread_flag(TIF_RUNLATCH)) {
+		HMT_medium();
+
+		clear_thread_flag(TIF_RUNLATCH);
+
+		ctrl = mfspr(SPRN_CTRLF);
+		ctrl &= ~CTRL_RUNLATCH;
+		mtspr(SPRN_CTRLT, ctrl);
+	}
+}
+#endif

arch/powerpc/kernel/prom.c

@@ -816,8 +816,6 @@ void __init unflatten_device_tree(void)
 {
 	unsigned long start, mem, size;
 	struct device_node **allnextp = &allnodes;
-	char *p = NULL;
-	int l = 0;
 
 	DBG(" -> unflatten_device_tree()\n");
 
@@ -857,19 +855,6 @@ void __init unflatten_device_tree(void)
 	if (of_chosen == NULL)
 		of_chosen = of_find_node_by_path("/chosen@0");
 
-	/* Retreive command line */
-	if (of_chosen != NULL) {
-		p = (char *)get_property(of_chosen, "bootargs", &l);
-		if (p != NULL && l > 0)
-			strlcpy(cmd_line, p, min(l, COMMAND_LINE_SIZE));
-	}
-#ifdef CONFIG_CMDLINE
-	if (l == 0 || (l == 1 && (*p) == 0))
-		strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
-#endif /* CONFIG_CMDLINE */
-
-	DBG("Command line is: %s\n", cmd_line);
-
 	DBG(" <- unflatten_device_tree()\n");
 }
 
@@ -940,6 +925,8 @@ static int __init early_init_dt_scan_chosen(unsigned long node,
 {
 	u32 *prop;
 	unsigned long *lprop;
+	unsigned long l;
+	char *p;
 
 	DBG("search \"chosen\", depth: %d, uname: %s\n", depth, uname);
 
@@ -1004,6 +991,41 @@ static int __init early_init_dt_scan_chosen(unsigned long node,
                crashk_res.end = crashk_res.start + *lprop - 1;
 #endif
 
+	/* Retreive command line */
+ 	p = of_get_flat_dt_prop(node, "bootargs", &l);
+	if (p != NULL && l > 0)
+		strlcpy(cmd_line, p, min((int)l, COMMAND_LINE_SIZE));
+
+#ifdef CONFIG_CMDLINE
+	if (l == 0 || (l == 1 && (*p) == 0))
+		strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
+#endif /* CONFIG_CMDLINE */
+
+	DBG("Command line is: %s\n", cmd_line);
+
+	if (strstr(cmd_line, "mem=")) {
+		char *p, *q;
+		unsigned long maxmem = 0;
+
+		for (q = cmd_line; (p = strstr(q, "mem=")) != 0; ) {
+			q = p + 4;
+			if (p > cmd_line && p[-1] != ' ')
+				continue;
+			maxmem = simple_strtoul(q, &q, 0);
+			if (*q == 'k' || *q == 'K') {
+				maxmem <<= 10;
+				++q;
+			} else if (*q == 'm' || *q == 'M') {
+				maxmem <<= 20;
+				++q;
+			} else if (*q == 'g' || *q == 'G') {
+				maxmem <<= 30;
+				++q;
+			}
+		}
+		memory_limit = maxmem;
+	}
+
 	/* break now */
 	return 1;
 }
@@ -1124,7 +1146,7 @@ static void __init early_reserve_mem(void)
 			size_32 = *(reserve_map_32++);
 			if (size_32 == 0)
 				break;
-			DBG("reserving: %lx -> %lx\n", base_32, size_32);
+			DBG("reserving: %x -> %x\n", base_32, size_32);
 			lmb_reserve(base_32, size_32);
 		}
 		return;