Merge branch 'spear/13xx' into next/soc2

* spear/13xx:
  pinctrl: SPEAr1310: Fix pin numbers for clcd_high_res
  SPEAr: Update MAINTAINERS and Documentation
  SPEAr13xx: Add defconfig
  SPEAr13xx: Add compilation support
  SPEAr13xx: Add dts and dtsi files
  pinctrl: Add SPEAr13xx pinctrl drivers
  pinctrl: SPEAr: Create macro for declaring GPIO PINS
  SPEAr13xx: Add common clock framework support
  SPEAr13xx: Add source files
  SPEAr13xx: Add header files

Depends on clock, pinctrl and dt branches to go first.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/arm/SPEAr/overview.txt

@@ -8,53 +8,56 @@ Introduction
   weblink : http://www.st.com/spear
 
   The ST Microelectronics SPEAr range of ARM9/CortexA9 System-on-Chip CPUs are
-  supported by the 'spear' platform of ARM Linux. Currently SPEAr300,
-  SPEAr310, SPEAr320 and SPEAr600 SOCs are supported. Support for the SPEAr13XX
-  series is in progress.
+  supported by the 'spear' platform of ARM Linux. Currently SPEAr1310,
+  SPEAr1340, SPEAr300, SPEAr310, SPEAr320 and SPEAr600 SOCs are supported.
 
   Hierarchy in SPEAr is as follows:
 
   SPEAr (Platform)
 	- SPEAr3XX (3XX SOC series, based on ARM9)
 		- SPEAr300 (SOC)
-			- SPEAr300_EVB (Evaluation Board)
+			- SPEAr300 Evaluation Board
 		- SPEAr310 (SOC)
-			- SPEAr310_EVB (Evaluation Board)
+			- SPEAr310 Evaluation Board
 		- SPEAr320 (SOC)
-			- SPEAr320_EVB (Evaluation Board)
+			- SPEAr320 Evaluation Board
 	- SPEAr6XX (6XX SOC series, based on ARM9)
 		- SPEAr600 (SOC)
-			- SPEAr600_EVB (Evaluation Board)
+			- SPEAr600 Evaluation Board
 	- SPEAr13XX (13XX SOC series, based on ARM CORTEXA9)
-		- SPEAr1300 (SOC)
+		- SPEAr1310 (SOC)
+			- SPEAr1310 Evaluation Board
+		- SPEAr1340 (SOC)
+			- SPEAr1340 Evaluation Board
 
   Configuration
   -------------
 
   A generic configuration is provided for each machine, and can be used as the
   default by
-	make spear600_defconfig
-	make spear300_defconfig
-	make spear310_defconfig
-	make spear320_defconfig
+	make spear13xx_defconfig
+	make spear3xx_defconfig
+	make spear6xx_defconfig
 
   Layout
   ------
 
-  The common files for multiple machine families (SPEAr3XX, SPEAr6XX and
-  SPEAr13XX) are located in the platform code contained in arch/arm/plat-spear
+  The common files for multiple machine families (SPEAr3xx, SPEAr6xx and
+  SPEAr13xx) are located in the platform code contained in arch/arm/plat-spear
   with headers in plat/.
 
   Each machine series have a directory with name arch/arm/mach-spear followed by
   series name. Like mach-spear3xx, mach-spear6xx and mach-spear13xx.
 
-  Common file for machines of spear3xx family is mach-spear3xx/spear3xx.c and for
-  spear6xx is mach-spear6xx/spear6xx.c. mach-spear* also contain soc/machine
-  specific files, like spear300.c, spear310.c, spear320.c and spear600.c.
-  mach-spear* also contains board specific files for each machine type.
+  Common file for machines of spear3xx family is mach-spear3xx/spear3xx.c, for
+  spear6xx is mach-spear6xx/spear6xx.c and for spear13xx family is
+  mach-spear13xx/spear13xx.c. mach-spear* also contain soc/machine specific
+  files, like spear1310.c, spear1340.c spear300.c, spear310.c, spear320.c and
+  spear600.c.  mach-spear* doesn't contains board specific files as they fully
+  support Flattened Device Tree.
 
 
   Document Author
   ---------------
 
-  Viresh Kumar, (c) 2010 ST Microelectronics
+  Viresh Kumar <viresh.kumar@st.com>, (c) 2010-2012 ST Microelectronics

Documentation/devicetree/bindings/arm/spear-timer.txt

@@ -0,0 +1,18 @@
+* SPEAr ARM Timer
+
+** Timer node required properties:
+
+- compatible : Should be:
+	"st,spear-timer"
+- reg: Address range of the timer registers
+- interrupt-parent: Should be the phandle for the interrupt controller
+  that services interrupts for this device
+- interrupt: Should contain the timer interrupt number
+
+Example:
+
+	timer@f0000000 {
+		compatible = "st,spear-timer";
+		reg = <0xf0000000 0x400>;
+		interrupts = <2>;
+	};

Documentation/devicetree/bindings/arm/spear.txt

@@ -2,7 +2,25 @@ ST SPEAr Platforms Device Tree Bindings
 ---------------------------------------
 
 Boards with the ST SPEAr600 SoC shall have the following properties:
+Required root node property:
+compatible = "st,spear600";
 
+Boards with the ST SPEAr300 SoC shall have the following properties:
 Required root node property:
+compatible = "st,spear300";
 
-compatible = "st,spear600";
+Boards with the ST SPEAr310 SoC shall have the following properties:
+Required root node property:
+compatible = "st,spear310";
+
+Boards with the ST SPEAr320 SoC shall have the following properties:
+Required root node property:
+compatible = "st,spear320";
+
+Boards with the ST SPEAr1310 SoC shall have the following properties:
+Required root node property:
+compatible = "st,spear1310";
+
+Boards with the ST SPEAr1340 SoC shall have the following properties:
+Required root node property:
+compatible = "st,spear1340";

Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt

@@ -0,0 +1,95 @@
+* Freescale IOMUX Controller (IOMUXC) for i.MX
+
+The IOMUX Controller (IOMUXC), together with the IOMUX, enables the IC
+to share one PAD to several functional blocks. The sharing is done by
+multiplexing the PAD input/output signals. For each PAD there are up to
+8 muxing options (called ALT modes). Since different modules require
+different PAD settings (like pull up, keeper, etc) the IOMUXC controls
+also the PAD settings parameters.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Freescale IMX pin configuration node is a node of a group of pins which can be
+used for a specific device or function. This node represents both mux and config
+of the pins in that group. The 'mux' selects the function mode(also named mux
+mode) this pin can work on and the 'config' configures various pad settings
+such as pull-up, open drain, drive strength, etc.
+
+Required properties for iomux controller:
+- compatible: "fsl,<soc>-iomuxc"
+  Please refer to each fsl,<soc>-pinctrl.txt binding doc for supported SoCs.
+
+Required properties for pin configuration node:
+- fsl,pins: two integers array, represents a group of pins mux and config
+  setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a
+  pin working on a specific function, CONFIG is the pad setting value like
+  pull-up on this pin. Please refer to fsl,<soc>-pinctrl.txt for the valid
+  pins and functions of each SoC.
+
+Bits used for CONFIG:
+NO_PAD_CTL(1 << 31): indicate this pin does not need config.
+
+SION(1 << 30): Software Input On Field.
+Force the selected mux mode input path no matter of MUX_MODE functionality.
+By default the input path is determined by functionality of the selected
+mux mode (regular).
+
+Other bits are used for PAD setting.
+Please refer to each fsl,<soc>-pinctrl,txt binding doc for SoC specific part
+of bits definitions.
+
+NOTE:
+Some requirements for using fsl,imx-pinctrl binding:
+1. We have pin function node defined under iomux controller node to represent
+   what pinmux functions this SoC supports.
+2. The pin configuration node intends to work on a specific function should
+   to be defined under that specific function node.
+   The function node's name should represent well about what function
+   this group of pins in this pin configuration node are working on.
+3. The driver can use the function node's name and pin configuration node's
+   name describe the pin function and group hierarchy.
+   For example, Linux IMX pinctrl driver takes the function node's name
+   as the function name and pin configuration node's name as group name to
+   create the map table.
+4. Each pin configuration node should have a phandle, devices can set pins
+   configurations by referring to the phandle of that pin configuration node.
+
+Examples:
+usdhc@0219c000 { /* uSDHC4 */
+	fsl,card-wired;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4_1>;
+};
+
+iomuxc@020e0000 {
+	compatible = "fsl,imx6q-iomuxc";
+	reg = <0x020e0000 0x4000>;
+
+	/* shared pinctrl settings */
+	usdhc4 {
+		pinctrl_usdhc4_1: usdhc4grp-1 {
+			fsl,pins = <1386 0x17059	/* MX6Q_PAD_SD4_CMD__USDHC4_CMD */
+				    1392 0x10059	/* MX6Q_PAD_SD4_CLK__USDHC4_CLK	*/
+				    1462 0x17059	/* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */
+				    1470 0x17059	/* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */
+				    1478 0x17059	/* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */
+				    1486 0x17059	/* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */
+				    1493 0x17059	/* MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 */
+				    1501 0x17059	/* MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 */
+				    1509 0x17059	/* MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 */
+				    1517 0x17059>;	/* MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 */
+		};
+	};
+	....
+};
+Refer to the IOMUXC controller chapter in imx6q datasheet,
+0x17059 means enable hysteresis, 47KOhm Pull Up, 50Mhz speed,
+80Ohm driver strength and Fast Slew Rate.
+User should refer to each SoC spec to set the correct value.
+
+TODO: when dtc macro support is available, we can change above raw data
+to dt macro which can get better readability in dts file.

Documentation/devicetree/bindings/pinctrl/fsl,imx6q-pinctrl.txt

@@ -0,0 +1,1628 @@
+* Freescale IMX6Q IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: "fsl,imx6q-iomuxc"
+- fsl,pins: two integers array, represents a group of pins mux and config
+  setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a
+  pin working on a specific function, CONFIG is the pad setting value like
+  pull-up for this pin. Please refer to imx6q datasheet for the valid pad
+  config settings.
+
+CONFIG bits definition:
+PAD_CTL_HYS                     (1 << 16)
+PAD_CTL_PUS_100K_DOWN           (0 << 14)
+PAD_CTL_PUS_47K_UP              (1 << 14)
+PAD_CTL_PUS_100K_UP             (2 << 14)
+PAD_CTL_PUS_22K_UP              (3 << 14)
+PAD_CTL_PUE                     (1 << 13)
+PAD_CTL_PKE                     (1 << 12)
+PAD_CTL_ODE                     (1 << 11)
+PAD_CTL_SPEED_LOW               (1 << 6)
+PAD_CTL_SPEED_MED               (2 << 6)
+PAD_CTL_SPEED_HIGH              (3 << 6)
+PAD_CTL_DSE_DISABLE             (0 << 3)
+PAD_CTL_DSE_240ohm              (1 << 3)
+PAD_CTL_DSE_120ohm              (2 << 3)
+PAD_CTL_DSE_80ohm               (3 << 3)
+PAD_CTL_DSE_60ohm               (4 << 3)
+PAD_CTL_DSE_48ohm               (5 << 3)
+PAD_CTL_DSE_40ohm               (6 << 3)
+PAD_CTL_DSE_34ohm               (7 << 3)
+PAD_CTL_SRE_FAST                (1 << 0)
+PAD_CTL_SRE_SLOW                (0 << 0)
+
+See below for available PIN_FUNC_ID for imx6q:
+MX6Q_PAD_SD2_DAT1__USDHC2_DAT1			0
+MX6Q_PAD_SD2_DAT1__ECSPI5_SS0			1
+MX6Q_PAD_SD2_DAT1__WEIM_WEIM_CS_2		2
+MX6Q_PAD_SD2_DAT1__AUDMUX_AUD4_TXFS		3
+MX6Q_PAD_SD2_DAT1__KPP_COL_7			4
+MX6Q_PAD_SD2_DAT1__GPIO_1_14			5
+MX6Q_PAD_SD2_DAT1__CCM_WAIT			6
+MX6Q_PAD_SD2_DAT1__ANATOP_TESTO_0		7
+MX6Q_PAD_SD2_DAT2__USDHC2_DAT2			8
+MX6Q_PAD_SD2_DAT2__ECSPI5_SS1			9
+MX6Q_PAD_SD2_DAT2__WEIM_WEIM_CS_3		10
+MX6Q_PAD_SD2_DAT2__AUDMUX_AUD4_TXD		11
+MX6Q_PAD_SD2_DAT2__KPP_ROW_6			12
+MX6Q_PAD_SD2_DAT2__GPIO_1_13			13
+MX6Q_PAD_SD2_DAT2__CCM_STOP			14
+MX6Q_PAD_SD2_DAT2__ANATOP_TESTO_1		15
+MX6Q_PAD_SD2_DAT0__USDHC2_DAT0			16
+MX6Q_PAD_SD2_DAT0__ECSPI5_MISO			17
+MX6Q_PAD_SD2_DAT0__AUDMUX_AUD4_RXD		18
+MX6Q_PAD_SD2_DAT0__KPP_ROW_7			19
+MX6Q_PAD_SD2_DAT0__GPIO_1_15			20
+MX6Q_PAD_SD2_DAT0__DCIC2_DCIC_OUT		21
+MX6Q_PAD_SD2_DAT0__TESTO_2			22
+MX6Q_PAD_RGMII_TXC__USBOH3_H2_DATA		23
+MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC		24
+MX6Q_PAD_RGMII_TXC__SPDIF_SPDIF_EXTCLK		25
+MX6Q_PAD_RGMII_TXC__GPIO_6_19			26
+MX6Q_PAD_RGMII_TXC__MIPI_CORE_DPHY_IN_0		27
+MX6Q_PAD_RGMII_TXC__ANATOP_24M_OUT		28
+MX6Q_PAD_RGMII_TD0__MIPI_HSI_CRL_TX_RDY		29
+MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0		30
+MX6Q_PAD_RGMII_TD0__GPIO_6_20			31
+MX6Q_PAD_RGMII_TD0__MIPI_CORE_DPHY_IN_1		32
+MX6Q_PAD_RGMII_TD1__MIPI_HSI_CRL_RX_FLG		33
+MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1		34
+MX6Q_PAD_RGMII_TD1__GPIO_6_21			35
+MX6Q_PAD_RGMII_TD1__MIPI_CORE_DPHY_IN_2		36
+MX6Q_PAD_RGMII_TD1__CCM_PLL3_BYP		37
+MX6Q_PAD_RGMII_TD2__MIPI_HSI_CRL_RX_DTA		38
+MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2		39
+MX6Q_PAD_RGMII_TD2__GPIO_6_22			40
+MX6Q_PAD_RGMII_TD2__MIPI_CORE_DPHY_IN_3		41
+MX6Q_PAD_RGMII_TD2__CCM_PLL2_BYP		42
+MX6Q_PAD_RGMII_TD3__MIPI_HSI_CRL_RX_WAK		43
+MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3		44
+MX6Q_PAD_RGMII_TD3__GPIO_6_23			45
+MX6Q_PAD_RGMII_TD3__MIPI_CORE_DPHY_IN_4		46
+MX6Q_PAD_RGMII_RX_CTL__USBOH3_H3_DATA		47
+MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL		48
+MX6Q_PAD_RGMII_RX_CTL__GPIO_6_24		49
+MX6Q_PAD_RGMII_RX_CTL__MIPI_DPHY_IN_5		50
+MX6Q_PAD_RGMII_RD0__MIPI_HSI_CRL_RX_RDY		51
+MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0		52
+MX6Q_PAD_RGMII_RD0__GPIO_6_25			53
+MX6Q_PAD_RGMII_RD0__MIPI_CORE_DPHY_IN_6		54
+MX6Q_PAD_RGMII_TX_CTL__USBOH3_H2_STROBE		55
+MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL		56
+MX6Q_PAD_RGMII_TX_CTL__GPIO_6_26		57
+MX6Q_PAD_RGMII_TX_CTL__CORE_DPHY_IN_7		58
+MX6Q_PAD_RGMII_TX_CTL__ANATOP_REF_OUT		59
+MX6Q_PAD_RGMII_RD1__MIPI_HSI_CTRL_TX_FL		60
+MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1		61
+MX6Q_PAD_RGMII_RD1__GPIO_6_27			62
+MX6Q_PAD_RGMII_RD1__CORE_DPHY_TEST_IN_8		63
+MX6Q_PAD_RGMII_RD1__SJC_FAIL			64
+MX6Q_PAD_RGMII_RD2__MIPI_HSI_CRL_TX_DTA		65
+MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2		66
+MX6Q_PAD_RGMII_RD2__GPIO_6_28			67
+MX6Q_PAD_RGMII_RD2__MIPI_CORE_DPHY_IN_9		68
+MX6Q_PAD_RGMII_RD3__MIPI_HSI_CRL_TX_WAK		69
+MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3		70
+MX6Q_PAD_RGMII_RD3__GPIO_6_29			71
+MX6Q_PAD_RGMII_RD3__MIPI_CORE_DPHY_IN10		72
+MX6Q_PAD_RGMII_RXC__USBOH3_H3_STROBE		73
+MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC		74
+MX6Q_PAD_RGMII_RXC__GPIO_6_30			75
+MX6Q_PAD_RGMII_RXC__MIPI_CORE_DPHY_IN11		76
+MX6Q_PAD_EIM_A25__WEIM_WEIM_A_25		77
+MX6Q_PAD_EIM_A25__ECSPI4_SS1			78
+MX6Q_PAD_EIM_A25__ECSPI2_RDY			79
+MX6Q_PAD_EIM_A25__IPU1_DI1_PIN12		80
+MX6Q_PAD_EIM_A25__IPU1_DI0_D1_CS		81
+MX6Q_PAD_EIM_A25__GPIO_5_2			82
+MX6Q_PAD_EIM_A25__HDMI_TX_CEC_LINE		83
+MX6Q_PAD_EIM_A25__PL301_PER1_HBURST_0		84
+MX6Q_PAD_EIM_EB2__WEIM_WEIM_EB_2		85
+MX6Q_PAD_EIM_EB2__ECSPI1_SS0			86
+MX6Q_PAD_EIM_EB2__CCM_DI1_EXT_CLK		87
+MX6Q_PAD_EIM_EB2__IPU2_CSI1_D_19		88
+MX6Q_PAD_EIM_EB2__HDMI_TX_DDC_SCL		89
+MX6Q_PAD_EIM_EB2__GPIO_2_30			90
+MX6Q_PAD_EIM_EB2__I2C2_SCL			91
+MX6Q_PAD_EIM_EB2__SRC_BT_CFG_30			92
+MX6Q_PAD_EIM_D16__WEIM_WEIM_D_16		93
+MX6Q_PAD_EIM_D16__ECSPI1_SCLK			94
+MX6Q_PAD_EIM_D16__IPU1_DI0_PIN5			95
+MX6Q_PAD_EIM_D16__IPU2_CSI1_D_18		96
+MX6Q_PAD_EIM_D16__HDMI_TX_DDC_SDA		97
+MX6Q_PAD_EIM_D16__GPIO_3_16			98
+MX6Q_PAD_EIM_D16__I2C2_SDA			99
+MX6Q_PAD_EIM_D17__WEIM_WEIM_D_17		100
+MX6Q_PAD_EIM_D17__ECSPI1_MISO			101
+MX6Q_PAD_EIM_D17__IPU1_DI0_PIN6			102
+MX6Q_PAD_EIM_D17__IPU2_CSI1_PIXCLK		103
+MX6Q_PAD_EIM_D17__DCIC1_DCIC_OUT		104
+MX6Q_PAD_EIM_D17__GPIO_3_17			105
+MX6Q_PAD_EIM_D17__I2C3_SCL			106
+MX6Q_PAD_EIM_D17__PL301_PER1_HBURST_1		107
+MX6Q_PAD_EIM_D18__WEIM_WEIM_D_18		108
+MX6Q_PAD_EIM_D18__ECSPI1_MOSI			109
+MX6Q_PAD_EIM_D18__IPU1_DI0_PIN7			110
+MX6Q_PAD_EIM_D18__IPU2_CSI1_D_17		111
+MX6Q_PAD_EIM_D18__IPU1_DI1_D0_CS		112
+MX6Q_PAD_EIM_D18__GPIO_3_18			113
+MX6Q_PAD_EIM_D18__I2C3_SDA			114
+MX6Q_PAD_EIM_D18__PL301_PER1_HBURST_2		115
+MX6Q_PAD_EIM_D19__WEIM_WEIM_D_19		116
+MX6Q_PAD_EIM_D19__ECSPI1_SS1			117
+MX6Q_PAD_EIM_D19__IPU1_DI0_PIN8			118
+MX6Q_PAD_EIM_D19__IPU2_CSI1_D_16		119
+MX6Q_PAD_EIM_D19__UART1_CTS			120
+MX6Q_PAD_EIM_D19__GPIO_3_19			121
+MX6Q_PAD_EIM_D19__EPIT1_EPITO			122
+MX6Q_PAD_EIM_D19__PL301_PER1_HRESP		123
+MX6Q_PAD_EIM_D20__WEIM_WEIM_D_20		124
+MX6Q_PAD_EIM_D20__ECSPI4_SS0			125
+MX6Q_PAD_EIM_D20__IPU1_DI0_PIN16		126
+MX6Q_PAD_EIM_D20__IPU2_CSI1_D_15		127
+MX6Q_PAD_EIM_D20__UART1_RTS			128
+MX6Q_PAD_EIM_D20__GPIO_3_20			129
+MX6Q_PAD_EIM_D20__EPIT2_EPITO			130
+MX6Q_PAD_EIM_D21__WEIM_WEIM_D_21		131
+MX6Q_PAD_EIM_D21__ECSPI4_SCLK			132
+MX6Q_PAD_EIM_D21__IPU1_DI0_PIN17		133
+MX6Q_PAD_EIM_D21__IPU2_CSI1_D_11		134
+MX6Q_PAD_EIM_D21__USBOH3_USBOTG_OC		135
+MX6Q_PAD_EIM_D21__GPIO_3_21			136
+MX6Q_PAD_EIM_D21__I2C1_SCL			137
+MX6Q_PAD_EIM_D21__SPDIF_IN1			138
+MX6Q_PAD_EIM_D22__WEIM_WEIM_D_22		139
+MX6Q_PAD_EIM_D22__ECSPI4_MISO			140
+MX6Q_PAD_EIM_D22__IPU1_DI0_PIN1			141
+MX6Q_PAD_EIM_D22__IPU2_CSI1_D_10		142
+MX6Q_PAD_EIM_D22__USBOH3_USBOTG_PWR		143
+MX6Q_PAD_EIM_D22__GPIO_3_22			144
+MX6Q_PAD_EIM_D22__SPDIF_OUT1			145
+MX6Q_PAD_EIM_D22__PL301_PER1_HWRITE		146
+MX6Q_PAD_EIM_D23__WEIM_WEIM_D_23		147
+MX6Q_PAD_EIM_D23__IPU1_DI0_D0_CS		148
+MX6Q_PAD_EIM_D23__UART3_CTS			149
+MX6Q_PAD_EIM_D23__UART1_DCD			150
+MX6Q_PAD_EIM_D23__IPU2_CSI1_DATA_EN		151
+MX6Q_PAD_EIM_D23__GPIO_3_23			152
+MX6Q_PAD_EIM_D23__IPU1_DI1_PIN2			153
+MX6Q_PAD_EIM_D23__IPU1_DI1_PIN14		154
+MX6Q_PAD_EIM_EB3__WEIM_WEIM_EB_3		155
+MX6Q_PAD_EIM_EB3__ECSPI4_RDY			156
+MX6Q_PAD_EIM_EB3__UART3_RTS			157
+MX6Q_PAD_EIM_EB3__UART1_RI			158
+MX6Q_PAD_EIM_EB3__IPU2_CSI1_HSYNC		159
+MX6Q_PAD_EIM_EB3__GPIO_2_31			160
+MX6Q_PAD_EIM_EB3__IPU1_DI1_PIN3			161
+MX6Q_PAD_EIM_EB3__SRC_BT_CFG_31			162
+MX6Q_PAD_EIM_D24__WEIM_WEIM_D_24		163
+MX6Q_PAD_EIM_D24__ECSPI4_SS2			164
+MX6Q_PAD_EIM_D24__UART3_TXD			165
+MX6Q_PAD_EIM_D24__ECSPI1_SS2			166
+MX6Q_PAD_EIM_D24__ECSPI2_SS2			167
+MX6Q_PAD_EIM_D24__GPIO_3_24			168
+MX6Q_PAD_EIM_D24__AUDMUX_AUD5_RXFS		169
+MX6Q_PAD_EIM_D24__UART1_DTR			170
+MX6Q_PAD_EIM_D25__WEIM_WEIM_D_25		171
+MX6Q_PAD_EIM_D25__ECSPI4_SS3			172
+MX6Q_PAD_EIM_D25__UART3_RXD			173
+MX6Q_PAD_EIM_D25__ECSPI1_SS3			174
+MX6Q_PAD_EIM_D25__ECSPI2_SS3			175
+MX6Q_PAD_EIM_D25__GPIO_3_25			176
+MX6Q_PAD_EIM_D25__AUDMUX_AUD5_RXC		177
+MX6Q_PAD_EIM_D25__UART1_DSR			178
+MX6Q_PAD_EIM_D26__WEIM_WEIM_D_26		179
+MX6Q_PAD_EIM_D26__IPU1_DI1_PIN11		180
+MX6Q_PAD_EIM_D26__IPU1_CSI0_D_1			181
+MX6Q_PAD_EIM_D26__IPU2_CSI1_D_14		182
+MX6Q_PAD_EIM_D26__UART2_TXD			183
+MX6Q_PAD_EIM_D26__GPIO_3_26			184
+MX6Q_PAD_EIM_D26__IPU1_SISG_2			185
+MX6Q_PAD_EIM_D26__IPU1_DISP1_DAT_22		186
+MX6Q_PAD_EIM_D27__WEIM_WEIM_D_27		187
+MX6Q_PAD_EIM_D27__IPU1_DI1_PIN13		188
+MX6Q_PAD_EIM_D27__IPU1_CSI0_D_0			189
+MX6Q_PAD_EIM_D27__IPU2_CSI1_D_13		190
+MX6Q_PAD_EIM_D27__UART2_RXD			191
+MX6Q_PAD_EIM_D27__GPIO_3_27			192
+MX6Q_PAD_EIM_D27__IPU1_SISG_3			193
+MX6Q_PAD_EIM_D27__IPU1_DISP1_DAT_23		194
+MX6Q_PAD_EIM_D28__WEIM_WEIM_D_28		195
+MX6Q_PAD_EIM_D28__I2C1_SDA			196
+MX6Q_PAD_EIM_D28__ECSPI4_MOSI			197
+MX6Q_PAD_EIM_D28__IPU2_CSI1_D_12		198
+MX6Q_PAD_EIM_D28__UART2_CTS			199
+MX6Q_PAD_EIM_D28__GPIO_3_28			200
+MX6Q_PAD_EIM_D28__IPU1_EXT_TRIG			201
+MX6Q_PAD_EIM_D28__IPU1_DI0_PIN13		202
+MX6Q_PAD_EIM_D29__WEIM_WEIM_D_29		203
+MX6Q_PAD_EIM_D29__IPU1_DI1_PIN15		204
+MX6Q_PAD_EIM_D29__ECSPI4_SS0			205
+MX6Q_PAD_EIM_D29__UART2_RTS			206
+MX6Q_PAD_EIM_D29__GPIO_3_29			207
+MX6Q_PAD_EIM_D29__IPU2_CSI1_VSYNC		208
+MX6Q_PAD_EIM_D29__IPU1_DI0_PIN14		209
+MX6Q_PAD_EIM_D30__WEIM_WEIM_D_30		210
+MX6Q_PAD_EIM_D30__IPU1_DISP1_DAT_21		211
+MX6Q_PAD_EIM_D30__IPU1_DI0_PIN11		212
+MX6Q_PAD_EIM_D30__IPU1_CSI0_D_3			213
+MX6Q_PAD_EIM_D30__UART3_CTS			214
+MX6Q_PAD_EIM_D30__GPIO_3_30			215
+MX6Q_PAD_EIM_D30__USBOH3_USBH1_OC		216
+MX6Q_PAD_EIM_D30__PL301_PER1_HPROT_0		217
+MX6Q_PAD_EIM_D31__WEIM_WEIM_D_31		218
+MX6Q_PAD_EIM_D31__IPU1_DISP1_DAT_20		219
+MX6Q_PAD_EIM_D31__IPU1_DI0_PIN12		220
+MX6Q_PAD_EIM_D31__IPU1_CSI0_D_2			221
+MX6Q_PAD_EIM_D31__UART3_RTS			222
+MX6Q_PAD_EIM_D31__GPIO_3_31			223
+MX6Q_PAD_EIM_D31__USBOH3_USBH1_PWR		224
+MX6Q_PAD_EIM_D31__PL301_PER1_HPROT_1		225
+MX6Q_PAD_EIM_A24__WEIM_WEIM_A_24		226
+MX6Q_PAD_EIM_A24__IPU1_DISP1_DAT_19		227
+MX6Q_PAD_EIM_A24__IPU2_CSI1_D_19		228
+MX6Q_PAD_EIM_A24__IPU2_SISG_2			229
+MX6Q_PAD_EIM_A24__IPU1_SISG_2			230
+MX6Q_PAD_EIM_A24__GPIO_5_4			231
+MX6Q_PAD_EIM_A24__PL301_PER1_HPROT_2		232
+MX6Q_PAD_EIM_A24__SRC_BT_CFG_24			233
+MX6Q_PAD_EIM_A23__WEIM_WEIM_A_23		234
+MX6Q_PAD_EIM_A23__IPU1_DISP1_DAT_18		235
+MX6Q_PAD_EIM_A23__IPU2_CSI1_D_18		236
+MX6Q_PAD_EIM_A23__IPU2_SISG_3			237
+MX6Q_PAD_EIM_A23__IPU1_SISG_3			238
+MX6Q_PAD_EIM_A23__GPIO_6_6			239
+MX6Q_PAD_EIM_A23__PL301_PER1_HPROT_3		240
+MX6Q_PAD_EIM_A23__SRC_BT_CFG_23			241
+MX6Q_PAD_EIM_A22__WEIM_WEIM_A_22		242
+MX6Q_PAD_EIM_A22__IPU1_DISP1_DAT_17		243
+MX6Q_PAD_EIM_A22__IPU2_CSI1_D_17		244
+MX6Q_PAD_EIM_A22__GPIO_2_16			245
+MX6Q_PAD_EIM_A22__TPSMP_HDATA_0			246
+MX6Q_PAD_EIM_A22__SRC_BT_CFG_22			247
+MX6Q_PAD_EIM_A21__WEIM_WEIM_A_21		248
+MX6Q_PAD_EIM_A21__IPU1_DISP1_DAT_16		249
+MX6Q_PAD_EIM_A21__IPU2_CSI1_D_16		250
+MX6Q_PAD_EIM_A21__RESERVED_RESERVED		251
+MX6Q_PAD_EIM_A21__MIPI_CORE_DPHY_OUT_18		252
+MX6Q_PAD_EIM_A21__GPIO_2_17			253
+MX6Q_PAD_EIM_A21__TPSMP_HDATA_1			254
+MX6Q_PAD_EIM_A21__SRC_BT_CFG_21			255
+MX6Q_PAD_EIM_A20__WEIM_WEIM_A_20		256
+MX6Q_PAD_EIM_A20__IPU1_DISP1_DAT_15		257
+MX6Q_PAD_EIM_A20__IPU2_CSI1_D_15		258
+MX6Q_PAD_EIM_A20__RESERVED_RESERVED		259
+MX6Q_PAD_EIM_A20__MIPI_CORE_DPHY_OUT_19		260
+MX6Q_PAD_EIM_A20__GPIO_2_18			261
+MX6Q_PAD_EIM_A20__TPSMP_HDATA_2			262
+MX6Q_PAD_EIM_A20__SRC_BT_CFG_20			263
+MX6Q_PAD_EIM_A19__WEIM_WEIM_A_19		264
+MX6Q_PAD_EIM_A19__IPU1_DISP1_DAT_14		265
+MX6Q_PAD_EIM_A19__IPU2_CSI1_D_14		266
+MX6Q_PAD_EIM_A19__RESERVED_RESERVED		267
+MX6Q_PAD_EIM_A19__MIPI_CORE_DPHY_OUT_20		268
+MX6Q_PAD_EIM_A19__GPIO_2_19			269
+MX6Q_PAD_EIM_A19__TPSMP_HDATA_3			270
+MX6Q_PAD_EIM_A19__SRC_BT_CFG_19			271
+MX6Q_PAD_EIM_A18__WEIM_WEIM_A_18		272
+MX6Q_PAD_EIM_A18__IPU1_DISP1_DAT_13		273
+MX6Q_PAD_EIM_A18__IPU2_CSI1_D_13		274
+MX6Q_PAD_EIM_A18__RESERVED_RESERVED		275
+MX6Q_PAD_EIM_A18__MIPI_CORE_DPHY_OUT_21		276
+MX6Q_PAD_EIM_A18__GPIO_2_20			277
+MX6Q_PAD_EIM_A18__TPSMP_HDATA_4			278
+MX6Q_PAD_EIM_A18__SRC_BT_CFG_18			279
+MX6Q_PAD_EIM_A17__WEIM_WEIM_A_17		280
+MX6Q_PAD_EIM_A17__IPU1_DISP1_DAT_12		281
+MX6Q_PAD_EIM_A17__IPU2_CSI1_D_12		282
+MX6Q_PAD_EIM_A17__RESERVED_RESERVED		283
+MX6Q_PAD_EIM_A17__MIPI_CORE_DPHY_OUT_22		284
+MX6Q_PAD_EIM_A17__GPIO_2_21			285
+MX6Q_PAD_EIM_A17__TPSMP_HDATA_5			286
+MX6Q_PAD_EIM_A17__SRC_BT_CFG_17			287
+MX6Q_PAD_EIM_A16__WEIM_WEIM_A_16		288
+MX6Q_PAD_EIM_A16__IPU1_DI1_DISP_CLK		289
+MX6Q_PAD_EIM_A16__IPU2_CSI1_PIXCLK		290
+MX6Q_PAD_EIM_A16__MIPI_CORE_DPHY_OUT_23		291
+MX6Q_PAD_EIM_A16__GPIO_2_22			292
+MX6Q_PAD_EIM_A16__TPSMP_HDATA_6			293
+MX6Q_PAD_EIM_A16__SRC_BT_CFG_16			294
+MX6Q_PAD_EIM_CS0__WEIM_WEIM_CS_0		295
+MX6Q_PAD_EIM_CS0__IPU1_DI1_PIN5			296
+MX6Q_PAD_EIM_CS0__ECSPI2_SCLK			297
+MX6Q_PAD_EIM_CS0__MIPI_CORE_DPHY_OUT_24		298
+MX6Q_PAD_EIM_CS0__GPIO_2_23			299
+MX6Q_PAD_EIM_CS0__TPSMP_HDATA_7			300
+MX6Q_PAD_EIM_CS1__WEIM_WEIM_CS_1		301
+MX6Q_PAD_EIM_CS1__IPU1_DI1_PIN6			302
+MX6Q_PAD_EIM_CS1__ECSPI2_MOSI			303
+MX6Q_PAD_EIM_CS1__MIPI_CORE_DPHY_OUT_25		304
+MX6Q_PAD_EIM_CS1__GPIO_2_24			305
+MX6Q_PAD_EIM_CS1__TPSMP_HDATA_8			306
+MX6Q_PAD_EIM_OE__WEIM_WEIM_OE			307
+MX6Q_PAD_EIM_OE__IPU1_DI1_PIN7			308
+MX6Q_PAD_EIM_OE__ECSPI2_MISO			309
+MX6Q_PAD_EIM_OE__MIPI_CORE_DPHY_OUT_26		310
+MX6Q_PAD_EIM_OE__GPIO_2_25			311
+MX6Q_PAD_EIM_OE__TPSMP_HDATA_9			312
+MX6Q_PAD_EIM_RW__WEIM_WEIM_RW			313
+MX6Q_PAD_EIM_RW__IPU1_DI1_PIN8			314
+MX6Q_PAD_EIM_RW__ECSPI2_SS0			315
+MX6Q_PAD_EIM_RW__MIPI_CORE_DPHY_OUT_27		316
+MX6Q_PAD_EIM_RW__GPIO_2_26			317
+MX6Q_PAD_EIM_RW__TPSMP_HDATA_10			318
+MX6Q_PAD_EIM_RW__SRC_BT_CFG_29			319
+MX6Q_PAD_EIM_LBA__WEIM_WEIM_LBA			320
+MX6Q_PAD_EIM_LBA__IPU1_DI1_PIN17		321
+MX6Q_PAD_EIM_LBA__ECSPI2_SS1			322
+MX6Q_PAD_EIM_LBA__GPIO_2_27			323
+MX6Q_PAD_EIM_LBA__TPSMP_HDATA_11		324
+MX6Q_PAD_EIM_LBA__SRC_BT_CFG_26			325
+MX6Q_PAD_EIM_EB0__WEIM_WEIM_EB_0		326
+MX6Q_PAD_EIM_EB0__IPU1_DISP1_DAT_11		327
+MX6Q_PAD_EIM_EB0__IPU2_CSI1_D_11		328
+MX6Q_PAD_EIM_EB0__MIPI_CORE_DPHY_OUT_0		329
+MX6Q_PAD_EIM_EB0__CCM_PMIC_RDY			330
+MX6Q_PAD_EIM_EB0__GPIO_2_28			331
+MX6Q_PAD_EIM_EB0__TPSMP_HDATA_12		332
+MX6Q_PAD_EIM_EB0__SRC_BT_CFG_27			333
+MX6Q_PAD_EIM_EB1__WEIM_WEIM_EB_1		334
+MX6Q_PAD_EIM_EB1__IPU1_DISP1_DAT_10		335
+MX6Q_PAD_EIM_EB1__IPU2_CSI1_D_10		336
+MX6Q_PAD_EIM_EB1__MIPI_CORE_DPHY__OUT_1		337
+MX6Q_PAD_EIM_EB1__GPIO_2_29			338
+MX6Q_PAD_EIM_EB1__TPSMP_HDATA_13		339
+MX6Q_PAD_EIM_EB1__SRC_BT_CFG_28			340
+MX6Q_PAD_EIM_DA0__WEIM_WEIM_DA_A_0		341
+MX6Q_PAD_EIM_DA0__IPU1_DISP1_DAT_9		342
+MX6Q_PAD_EIM_DA0__IPU2_CSI1_D_9			343
+MX6Q_PAD_EIM_DA0__MIPI_CORE_DPHY__OUT_2		344
+MX6Q_PAD_EIM_DA0__GPIO_3_0			345
+MX6Q_PAD_EIM_DA0__TPSMP_HDATA_14		346
+MX6Q_PAD_EIM_DA0__SRC_BT_CFG_0			347
+MX6Q_PAD_EIM_DA1__WEIM_WEIM_DA_A_1		348
+MX6Q_PAD_EIM_DA1__IPU1_DISP1_DAT_8		349
+MX6Q_PAD_EIM_DA1__IPU2_CSI1_D_8			350
+MX6Q_PAD_EIM_DA1__MIPI_CORE_DPHY_OUT_3		351
+MX6Q_PAD_EIM_DA1__USBPHY1_TX_LS_MODE		352
+MX6Q_PAD_EIM_DA1__GPIO_3_1			353
+MX6Q_PAD_EIM_DA1__TPSMP_HDATA_15		354
+MX6Q_PAD_EIM_DA1__SRC_BT_CFG_1			355
+MX6Q_PAD_EIM_DA2__WEIM_WEIM_DA_A_2		356
+MX6Q_PAD_EIM_DA2__IPU1_DISP1_DAT_7		357
+MX6Q_PAD_EIM_DA2__IPU2_CSI1_D_7			358
+MX6Q_PAD_EIM_DA2__MIPI_CORE_DPHY_OUT_4		359
+MX6Q_PAD_EIM_DA2__USBPHY1_TX_HS_MODE		360
+MX6Q_PAD_EIM_DA2__GPIO_3_2			361
+MX6Q_PAD_EIM_DA2__TPSMP_HDATA_16		362
+MX6Q_PAD_EIM_DA2__SRC_BT_CFG_2			363
+MX6Q_PAD_EIM_DA3__WEIM_WEIM_DA_A_3		364
+MX6Q_PAD_EIM_DA3__IPU1_DISP1_DAT_6		365
+MX6Q_PAD_EIM_DA3__IPU2_CSI1_D_6			366
+MX6Q_PAD_EIM_DA3__MIPI_CORE_DPHY_OUT_5		367
+MX6Q_PAD_EIM_DA3__USBPHY1_TX_HIZ		368
+MX6Q_PAD_EIM_DA3__GPIO_3_3			369
+MX6Q_PAD_EIM_DA3__TPSMP_HDATA_17		370
+MX6Q_PAD_EIM_DA3__SRC_BT_CFG_3			371
+MX6Q_PAD_EIM_DA4__WEIM_WEIM_DA_A_4		372
+MX6Q_PAD_EIM_DA4__IPU1_DISP1_DAT_5		373
+MX6Q_PAD_EIM_DA4__IPU2_CSI1_D_5			374
+MX6Q_PAD_EIM_DA4__MIPI_CORE_DPHY_OUT_6		375
+MX6Q_PAD_EIM_DA4__ANATOP_USBPHY1_TX_EN		376
+MX6Q_PAD_EIM_DA4__GPIO_3_4			377
+MX6Q_PAD_EIM_DA4__TPSMP_HDATA_18		378
+MX6Q_PAD_EIM_DA4__SRC_BT_CFG_4			379
+MX6Q_PAD_EIM_DA5__WEIM_WEIM_DA_A_5		380
+MX6Q_PAD_EIM_DA5__IPU1_DISP1_DAT_4		381
+MX6Q_PAD_EIM_DA5__IPU2_CSI1_D_4			382
+MX6Q_PAD_EIM_DA5__MIPI_CORE_DPHY_OUT_7		383
+MX6Q_PAD_EIM_DA5__ANATOP_USBPHY1_TX_DP		384
+MX6Q_PAD_EIM_DA5__GPIO_3_5			385
+MX6Q_PAD_EIM_DA5__TPSMP_HDATA_19		386
+MX6Q_PAD_EIM_DA5__SRC_BT_CFG_5			387
+MX6Q_PAD_EIM_DA6__WEIM_WEIM_DA_A_6		388
+MX6Q_PAD_EIM_DA6__IPU1_DISP1_DAT_3		389
+MX6Q_PAD_EIM_DA6__IPU2_CSI1_D_3			390
+MX6Q_PAD_EIM_DA6__MIPI_CORE_DPHY_OUT_8		391
+MX6Q_PAD_EIM_DA6__ANATOP_USBPHY1_TX_DN		392
+MX6Q_PAD_EIM_DA6__GPIO_3_6			393
+MX6Q_PAD_EIM_DA6__TPSMP_HDATA_20		394
+MX6Q_PAD_EIM_DA6__SRC_BT_CFG_6			395
+MX6Q_PAD_EIM_DA7__WEIM_WEIM_DA_A_7		396
+MX6Q_PAD_EIM_DA7__IPU1_DISP1_DAT_2		397
+MX6Q_PAD_EIM_DA7__IPU2_CSI1_D_2			398
+MX6Q_PAD_EIM_DA7__MIPI_CORE_DPHY_OUT_9		399
+MX6Q_PAD_EIM_DA7__GPIO_3_7			400
+MX6Q_PAD_EIM_DA7__TPSMP_HDATA_21		401
+MX6Q_PAD_EIM_DA7__SRC_BT_CFG_7			402
+MX6Q_PAD_EIM_DA8__WEIM_WEIM_DA_A_8		403
+MX6Q_PAD_EIM_DA8__IPU1_DISP1_DAT_1		404
+MX6Q_PAD_EIM_DA8__IPU2_CSI1_D_1			405
+MX6Q_PAD_EIM_DA8__MIPI_CORE_DPHY_OUT_10		406
+MX6Q_PAD_EIM_DA8__GPIO_3_8			407
+MX6Q_PAD_EIM_DA8__TPSMP_HDATA_22		408
+MX6Q_PAD_EIM_DA8__SRC_BT_CFG_8			409
+MX6Q_PAD_EIM_DA9__WEIM_WEIM_DA_A_9		410
+MX6Q_PAD_EIM_DA9__IPU1_DISP1_DAT_0		411
+MX6Q_PAD_EIM_DA9__IPU2_CSI1_D_0			412
+MX6Q_PAD_EIM_DA9__MIPI_CORE_DPHY_OUT_11		413
+MX6Q_PAD_EIM_DA9__GPIO_3_9			414
+MX6Q_PAD_EIM_DA9__TPSMP_HDATA_23		415
+MX6Q_PAD_EIM_DA9__SRC_BT_CFG_9			416
+MX6Q_PAD_EIM_DA10__WEIM_WEIM_DA_A_10		417
+MX6Q_PAD_EIM_DA10__IPU1_DI1_PIN15		418
+MX6Q_PAD_EIM_DA10__IPU2_CSI1_DATA_EN		419
+MX6Q_PAD_EIM_DA10__MIPI_CORE_DPHY_OUT12		420
+MX6Q_PAD_EIM_DA10__GPIO_3_10			421
+MX6Q_PAD_EIM_DA10__TPSMP_HDATA_24		422
+MX6Q_PAD_EIM_DA10__SRC_BT_CFG_10		423
+MX6Q_PAD_EIM_DA11__WEIM_WEIM_DA_A_11		424
+MX6Q_PAD_EIM_DA11__IPU1_DI1_PIN2		425
+MX6Q_PAD_EIM_DA11__IPU2_CSI1_HSYNC		426
+MX6Q_PAD_EIM_DA11__MIPI_CORE_DPHY_OUT13		427
+MX6Q_PAD_EIM_DA11__SDMA_DBG_EVT_CHN_6		428
+MX6Q_PAD_EIM_DA11__GPIO_3_11			429
+MX6Q_PAD_EIM_DA11__TPSMP_HDATA_25		430
+MX6Q_PAD_EIM_DA11__SRC_BT_CFG_11		431
+MX6Q_PAD_EIM_DA12__WEIM_WEIM_DA_A_12		432
+MX6Q_PAD_EIM_DA12__IPU1_DI1_PIN3		433
+MX6Q_PAD_EIM_DA12__IPU2_CSI1_VSYNC		434
+MX6Q_PAD_EIM_DA12__MIPI_CORE_DPHY_OUT14		435
+MX6Q_PAD_EIM_DA12__SDMA_DEBUG_EVT_CHN_3		436
+MX6Q_PAD_EIM_DA12__GPIO_3_12			437
+MX6Q_PAD_EIM_DA12__TPSMP_HDATA_26		438
+MX6Q_PAD_EIM_DA12__SRC_BT_CFG_12		439
+MX6Q_PAD_EIM_DA13__WEIM_WEIM_DA_A_13		440
+MX6Q_PAD_EIM_DA13__IPU1_DI1_D0_CS		441
+MX6Q_PAD_EIM_DA13__CCM_DI1_EXT_CLK		442
+MX6Q_PAD_EIM_DA13__MIPI_CORE_DPHY_OUT15		443
+MX6Q_PAD_EIM_DA13__SDMA_DEBUG_EVT_CHN_4		444
+MX6Q_PAD_EIM_DA13__GPIO_3_13			445
+MX6Q_PAD_EIM_DA13__TPSMP_HDATA_27		446
+MX6Q_PAD_EIM_DA13__SRC_BT_CFG_13		447
+MX6Q_PAD_EIM_DA14__WEIM_WEIM_DA_A_14		448
+MX6Q_PAD_EIM_DA14__IPU1_DI1_D1_CS		449
+MX6Q_PAD_EIM_DA14__CCM_DI0_EXT_CLK		450
+MX6Q_PAD_EIM_DA14__MIPI_CORE_DPHY_OUT16		451
+MX6Q_PAD_EIM_DA14__SDMA_DEBUG_EVT_CHN_5		452
+MX6Q_PAD_EIM_DA14__GPIO_3_14			453
+MX6Q_PAD_EIM_DA14__TPSMP_HDATA_28		454
+MX6Q_PAD_EIM_DA14__SRC_BT_CFG_14		455
+MX6Q_PAD_EIM_DA15__WEIM_WEIM_DA_A_15		456
+MX6Q_PAD_EIM_DA15__IPU1_DI1_PIN1		457
+MX6Q_PAD_EIM_DA15__IPU1_DI1_PIN4		458
+MX6Q_PAD_EIM_DA15__MIPI_CORE_DPHY_OUT17		459
+MX6Q_PAD_EIM_DA15__GPIO_3_15			460
+MX6Q_PAD_EIM_DA15__TPSMP_HDATA_29		461
+MX6Q_PAD_EIM_DA15__SRC_BT_CFG_15		462
+MX6Q_PAD_EIM_WAIT__WEIM_WEIM_WAIT		463
+MX6Q_PAD_EIM_WAIT__WEIM_WEIM_DTACK_B		464
+MX6Q_PAD_EIM_WAIT__GPIO_5_0			465
+MX6Q_PAD_EIM_WAIT__TPSMP_HDATA_30		466
+MX6Q_PAD_EIM_WAIT__SRC_BT_CFG_25		467
+MX6Q_PAD_EIM_BCLK__WEIM_WEIM_BCLK		468
+MX6Q_PAD_EIM_BCLK__IPU1_DI1_PIN16		469
+MX6Q_PAD_EIM_BCLK__GPIO_6_31			470
+MX6Q_PAD_EIM_BCLK__TPSMP_HDATA_31		471
+MX6Q_PAD_DI0_DISP_CLK__IPU1_DI0_DSP_CLK		472
+MX6Q_PAD_DI0_DISP_CLK__IPU2_DI0_DSP_CLK		473
+MX6Q_PAD_DI0_DISP_CLK__MIPI_CR_DPY_OT28		474
+MX6Q_PAD_DI0_DISP_CLK__SDMA_DBG_CR_STA0		475
+MX6Q_PAD_DI0_DISP_CLK__GPIO_4_16		476
+MX6Q_PAD_DI0_DISP_CLK__MMDC_DEBUG_0		477
+MX6Q_PAD_DI0_PIN15__IPU1_DI0_PIN15		478
+MX6Q_PAD_DI0_PIN15__IPU2_DI0_PIN15		479
+MX6Q_PAD_DI0_PIN15__AUDMUX_AUD6_TXC		480
+MX6Q_PAD_DI0_PIN15__MIPI_CR_DPHY_OUT_29		481
+MX6Q_PAD_DI0_PIN15__SDMA_DBG_CORE_STA_1		482
+MX6Q_PAD_DI0_PIN15__GPIO_4_17			483
+MX6Q_PAD_DI0_PIN15__MMDC_MMDC_DEBUG_1		484
+MX6Q_PAD_DI0_PIN2__IPU1_DI0_PIN2		485
+MX6Q_PAD_DI0_PIN2__IPU2_DI0_PIN2		486
+MX6Q_PAD_DI0_PIN2__AUDMUX_AUD6_TXD		487
+MX6Q_PAD_DI0_PIN2__MIPI_CR_DPHY_OUT_30		488
+MX6Q_PAD_DI0_PIN2__SDMA_DBG_CORE_STA_2		489
+MX6Q_PAD_DI0_PIN2__GPIO_4_18			490
+MX6Q_PAD_DI0_PIN2__MMDC_DEBUG_2			491
+MX6Q_PAD_DI0_PIN2__PL301_PER1_HADDR_9		492
+MX6Q_PAD_DI0_PIN3__IPU1_DI0_PIN3		493
+MX6Q_PAD_DI0_PIN3__IPU2_DI0_PIN3		494
+MX6Q_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS		495
+MX6Q_PAD_DI0_PIN3__MIPI_CORE_DPHY_OUT31		496
+MX6Q_PAD_DI0_PIN3__SDMA_DBG_CORE_STA_3		497
+MX6Q_PAD_DI0_PIN3__GPIO_4_19			498
+MX6Q_PAD_DI0_PIN3__MMDC_MMDC_DEBUG_3		499
+MX6Q_PAD_DI0_PIN3__PL301_PER1_HADDR_10		500
+MX6Q_PAD_DI0_PIN4__IPU1_DI0_PIN4		501
+MX6Q_PAD_DI0_PIN4__IPU2_DI0_PIN4		502
+MX6Q_PAD_DI0_PIN4__AUDMUX_AUD6_RXD		503
+MX6Q_PAD_DI0_PIN4__USDHC1_WP			504
+MX6Q_PAD_DI0_PIN4__SDMA_DEBUG_YIELD		505
+MX6Q_PAD_DI0_PIN4__GPIO_4_20			506
+MX6Q_PAD_DI0_PIN4__MMDC_MMDC_DEBUG_4		507
+MX6Q_PAD_DI0_PIN4__PL301_PER1_HADDR_11		508
+MX6Q_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0		509
+MX6Q_PAD_DISP0_DAT0__IPU2_DISP0_DAT_0		510
+MX6Q_PAD_DISP0_DAT0__ECSPI3_SCLK		511
+MX6Q_PAD_DISP0_DAT0__USDHC1_USDHC_DBG_0		512
+MX6Q_PAD_DISP0_DAT0__SDMA_DBG_CORE_RUN		513
+MX6Q_PAD_DISP0_DAT0__GPIO_4_21			514
+MX6Q_PAD_DISP0_DAT0__MMDC_MMDC_DEBUG_5		515
+MX6Q_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1		516
+MX6Q_PAD_DISP0_DAT1__IPU2_DISP0_DAT_1		517
+MX6Q_PAD_DISP0_DAT1__ECSPI3_MOSI		518
+MX6Q_PAD_DISP0_DAT1__USDHC1_USDHC_DBG_1		519
+MX6Q_PAD_DISP0_DAT1__SDMA_DBG_EVT_CHNSL		520
+MX6Q_PAD_DISP0_DAT1__GPIO_4_22			521
+MX6Q_PAD_DISP0_DAT1__MMDC_DEBUG_6		522
+MX6Q_PAD_DISP0_DAT1__PL301_PER1_HADR_12		523
+MX6Q_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2		524
+MX6Q_PAD_DISP0_DAT2__IPU2_DISP0_DAT_2		525
+MX6Q_PAD_DISP0_DAT2__ECSPI3_MISO		526
+MX6Q_PAD_DISP0_DAT2__USDHC1_USDHC_DBG_2		527
+MX6Q_PAD_DISP0_DAT2__SDMA_DEBUG_MODE		528
+MX6Q_PAD_DISP0_DAT2__GPIO_4_23			529
+MX6Q_PAD_DISP0_DAT2__MMDC_DEBUG_7		530
+MX6Q_PAD_DISP0_DAT2__PL301_PER1_HADR_13		531
+MX6Q_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3		532
+MX6Q_PAD_DISP0_DAT3__IPU2_DISP0_DAT_3		533
+MX6Q_PAD_DISP0_DAT3__ECSPI3_SS0			534
+MX6Q_PAD_DISP0_DAT3__USDHC1_USDHC_DBG_3		535
+MX6Q_PAD_DISP0_DAT3__SDMA_DBG_BUS_ERROR		536
+MX6Q_PAD_DISP0_DAT3__GPIO_4_24			537
+MX6Q_PAD_DISP0_DAT3__MMDC_MMDC_DBG_8		538
+MX6Q_PAD_DISP0_DAT3__PL301_PER1_HADR_14		539
+MX6Q_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4		540
+MX6Q_PAD_DISP0_DAT4__IPU2_DISP0_DAT_4		541
+MX6Q_PAD_DISP0_DAT4__ECSPI3_SS1			542
+MX6Q_PAD_DISP0_DAT4__USDHC1_USDHC_DBG_4		543
+MX6Q_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB		544
+MX6Q_PAD_DISP0_DAT4__GPIO_4_25			545
+MX6Q_PAD_DISP0_DAT4__MMDC_MMDC_DEBUG_9		546
+MX6Q_PAD_DISP0_DAT4__PL301_PER1_HADR_15		547
+MX6Q_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5		548
+MX6Q_PAD_DISP0_DAT5__IPU2_DISP0_DAT_5		549
+MX6Q_PAD_DISP0_DAT5__ECSPI3_SS2			550
+MX6Q_PAD_DISP0_DAT5__AUDMUX_AUD6_RXFS		551
+MX6Q_PAD_DISP0_DAT5__SDMA_DBG_MCH_DMBUS		552
+MX6Q_PAD_DISP0_DAT5__GPIO_4_26			553
+MX6Q_PAD_DISP0_DAT5__MMDC_DEBUG_10		554
+MX6Q_PAD_DISP0_DAT5__PL301_PER1_HADR_16		555
+MX6Q_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6		556
+MX6Q_PAD_DISP0_DAT6__IPU2_DISP0_DAT_6		557
+MX6Q_PAD_DISP0_DAT6__ECSPI3_SS3			558
+MX6Q_PAD_DISP0_DAT6__AUDMUX_AUD6_RXC		559
+MX6Q_PAD_DISP0_DAT6__SDMA_DBG_RTBUF_WRT		560
+MX6Q_PAD_DISP0_DAT6__GPIO_4_27			561
+MX6Q_PAD_DISP0_DAT6__MMDC_DEBUG_11		562
+MX6Q_PAD_DISP0_DAT6__PL301_PER1_HADR_17		563
+MX6Q_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7		564
+MX6Q_PAD_DISP0_DAT7__IPU2_DISP0_DAT_7		565
+MX6Q_PAD_DISP0_DAT7__ECSPI3_RDY			566
+MX6Q_PAD_DISP0_DAT7__USDHC1_USDHC_DBG_5		567
+MX6Q_PAD_DISP0_DAT7__SDMA_DBG_EVT_CHN_0		568
+MX6Q_PAD_DISP0_DAT7__GPIO_4_28			569
+MX6Q_PAD_DISP0_DAT7__MMDC_DEBUG_12		570
+MX6Q_PAD_DISP0_DAT7__PL301_PER1_HADR_18		571
+MX6Q_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8		572
+MX6Q_PAD_DISP0_DAT8__IPU2_DISP0_DAT_8		573
+MX6Q_PAD_DISP0_DAT8__PWM1_PWMO			574
+MX6Q_PAD_DISP0_DAT8__WDOG1_WDOG_B		575
+MX6Q_PAD_DISP0_DAT8__SDMA_DBG_EVT_CHN_1		576
+MX6Q_PAD_DISP0_DAT8__GPIO_4_29			577
+MX6Q_PAD_DISP0_DAT8__MMDC_DEBUG_13		578
+MX6Q_PAD_DISP0_DAT8__PL301_PER1_HADR_19		579
+MX6Q_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9		580
+MX6Q_PAD_DISP0_DAT9__IPU2_DISP0_DAT_9		581
+MX6Q_PAD_DISP0_DAT9__PWM2_PWMO			582
+MX6Q_PAD_DISP0_DAT9__WDOG2_WDOG_B		583
+MX6Q_PAD_DISP0_DAT9__SDMA_DBG_EVT_CHN_2		584
+MX6Q_PAD_DISP0_DAT9__GPIO_4_30			585
+MX6Q_PAD_DISP0_DAT9__MMDC_DEBUG_14		586
+MX6Q_PAD_DISP0_DAT9__PL301_PER1_HADR_20		587
+MX6Q_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10		588
+MX6Q_PAD_DISP0_DAT10__IPU2_DISP0_DAT_10		589
+MX6Q_PAD_DISP0_DAT10__USDHC1_DBG_6		590
+MX6Q_PAD_DISP0_DAT10__SDMA_DBG_EVT_CHN3		591
+MX6Q_PAD_DISP0_DAT10__GPIO_4_31			592
+MX6Q_PAD_DISP0_DAT10__MMDC_DEBUG_15		593
+MX6Q_PAD_DISP0_DAT10__PL301_PER1_HADR21		594
+MX6Q_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11		595
+MX6Q_PAD_DISP0_DAT11__IPU2_DISP0_DAT_11		596
+MX6Q_PAD_DISP0_DAT11__USDHC1_USDHC_DBG7		597
+MX6Q_PAD_DISP0_DAT11__SDMA_DBG_EVT_CHN4		598
+MX6Q_PAD_DISP0_DAT11__GPIO_5_5			599
+MX6Q_PAD_DISP0_DAT11__MMDC_DEBUG_16		600
+MX6Q_PAD_DISP0_DAT11__PL301_PER1_HADR22		601
+MX6Q_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12		602
+MX6Q_PAD_DISP0_DAT12__IPU2_DISP0_DAT_12		603
+MX6Q_PAD_DISP0_DAT12__RESERVED_RESERVED		604
+MX6Q_PAD_DISP0_DAT12__SDMA_DBG_EVT_CHN5		605
+MX6Q_PAD_DISP0_DAT12__GPIO_5_6			606
+MX6Q_PAD_DISP0_DAT12__MMDC_DEBUG_17		607
+MX6Q_PAD_DISP0_DAT12__PL301_PER1_HADR23		608
+MX6Q_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13		609
+MX6Q_PAD_DISP0_DAT13__IPU2_DISP0_DAT_13		610
+MX6Q_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS		611
+MX6Q_PAD_DISP0_DAT13__SDMA_DBG_EVT_CHN0		612
+MX6Q_PAD_DISP0_DAT13__GPIO_5_7			613
+MX6Q_PAD_DISP0_DAT13__MMDC_DEBUG_18		614
+MX6Q_PAD_DISP0_DAT13__PL301_PER1_HADR24		615
+MX6Q_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14		616
+MX6Q_PAD_DISP0_DAT14__IPU2_DISP0_DAT_14		617
+MX6Q_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC		618
+MX6Q_PAD_DISP0_DAT14__SDMA_DBG_EVT_CHN1		619
+MX6Q_PAD_DISP0_DAT14__GPIO_5_8			620
+MX6Q_PAD_DISP0_DAT14__MMDC_DEBUG_19		621
+MX6Q_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15		622
+MX6Q_PAD_DISP0_DAT15__IPU2_DISP0_DAT_15		623
+MX6Q_PAD_DISP0_DAT15__ECSPI1_SS1		624
+MX6Q_PAD_DISP0_DAT15__ECSPI2_SS1		625
+MX6Q_PAD_DISP0_DAT15__SDMA_DBG_EVT_CHN2		626
+MX6Q_PAD_DISP0_DAT15__GPIO_5_9			627
+MX6Q_PAD_DISP0_DAT15__MMDC_DEBUG_20		628
+MX6Q_PAD_DISP0_DAT15__PL301_PER1_HADR25		629
+MX6Q_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16		630
+MX6Q_PAD_DISP0_DAT16__IPU2_DISP0_DAT_16		631
+MX6Q_PAD_DISP0_DAT16__ECSPI2_MOSI		632
+MX6Q_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC		633
+MX6Q_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0		634
+MX6Q_PAD_DISP0_DAT16__GPIO_5_10			635
+MX6Q_PAD_DISP0_DAT16__MMDC_DEBUG_21		636
+MX6Q_PAD_DISP0_DAT16__PL301_PER1_HADR26		637
+MX6Q_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17		638
+MX6Q_PAD_DISP0_DAT17__IPU2_DISP0_DAT_17		639
+MX6Q_PAD_DISP0_DAT17__ECSPI2_MISO		640
+MX6Q_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD		641
+MX6Q_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1		642
+MX6Q_PAD_DISP0_DAT17__GPIO_5_11			643
+MX6Q_PAD_DISP0_DAT17__MMDC_DEBUG_22		644
+MX6Q_PAD_DISP0_DAT17__PL301_PER1_HADR27		645
+MX6Q_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18		646
+MX6Q_PAD_DISP0_DAT18__IPU2_DISP0_DAT_18		647
+MX6Q_PAD_DISP0_DAT18__ECSPI2_SS0		648
+MX6Q_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS		649
+MX6Q_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS		650
+MX6Q_PAD_DISP0_DAT18__GPIO_5_12			651
+MX6Q_PAD_DISP0_DAT18__MMDC_DEBUG_23		652
+MX6Q_PAD_DISP0_DAT18__WEIM_WEIM_CS_2		653
+MX6Q_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19		654
+MX6Q_PAD_DISP0_DAT19__IPU2_DISP0_DAT_19		655
+MX6Q_PAD_DISP0_DAT19__ECSPI2_SCLK		656
+MX6Q_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD		657
+MX6Q_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC		658
+MX6Q_PAD_DISP0_DAT19__GPIO_5_13			659
+MX6Q_PAD_DISP0_DAT19__MMDC_DEBUG_24		660
+MX6Q_PAD_DISP0_DAT19__WEIM_WEIM_CS_3		661
+MX6Q_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20		662
+MX6Q_PAD_DISP0_DAT20__IPU2_DISP0_DAT_20		663
+MX6Q_PAD_DISP0_DAT20__ECSPI1_SCLK		664
+MX6Q_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC		665
+MX6Q_PAD_DISP0_DAT20__SDMA_DBG_EVT_CHN7		666
+MX6Q_PAD_DISP0_DAT20__GPIO_5_14			667
+MX6Q_PAD_DISP0_DAT20__MMDC_DEBUG_25		668
+MX6Q_PAD_DISP0_DAT20__PL301_PER1_HADR28		669
+MX6Q_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21		670
+MX6Q_PAD_DISP0_DAT21__IPU2_DISP0_DAT_21		671
+MX6Q_PAD_DISP0_DAT21__ECSPI1_MOSI		672
+MX6Q_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD		673
+MX6Q_PAD_DISP0_DAT21__SDMA_DBG_BUS_DEV0		674
+MX6Q_PAD_DISP0_DAT21__GPIO_5_15			675
+MX6Q_PAD_DISP0_DAT21__MMDC_DEBUG_26		676
+MX6Q_PAD_DISP0_DAT21__PL301_PER1_HADR29		677
+MX6Q_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22		678
+MX6Q_PAD_DISP0_DAT22__IPU2_DISP0_DAT_22		679
+MX6Q_PAD_DISP0_DAT22__ECSPI1_MISO		680
+MX6Q_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS		681
+MX6Q_PAD_DISP0_DAT22__SDMA_DBG_BUS_DEV1		682
+MX6Q_PAD_DISP0_DAT22__GPIO_5_16			683
+MX6Q_PAD_DISP0_DAT22__MMDC_DEBUG_27		684
+MX6Q_PAD_DISP0_DAT22__PL301_PER1_HADR30		685
+MX6Q_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23		686
+MX6Q_PAD_DISP0_DAT23__IPU2_DISP0_DAT_23		687
+MX6Q_PAD_DISP0_DAT23__ECSPI1_SS0		688
+MX6Q_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD		689
+MX6Q_PAD_DISP0_DAT23__SDMA_DBG_BUS_DEV2		690
+MX6Q_PAD_DISP0_DAT23__GPIO_5_17			691
+MX6Q_PAD_DISP0_DAT23__MMDC_DEBUG_28		692
+MX6Q_PAD_DISP0_DAT23__PL301_PER1_HADR31		693
+MX6Q_PAD_ENET_MDIO__RESERVED_RESERVED		694
+MX6Q_PAD_ENET_MDIO__ENET_MDIO			695
+MX6Q_PAD_ENET_MDIO__ESAI1_SCKR			696
+MX6Q_PAD_ENET_MDIO__SDMA_DEBUG_BUS_DEV3		697
+MX6Q_PAD_ENET_MDIO__ENET_1588_EVT1_OUT		698
+MX6Q_PAD_ENET_MDIO__GPIO_1_22			699
+MX6Q_PAD_ENET_MDIO__SPDIF_PLOCK			700
+MX6Q_PAD_ENET_REF_CLK__RESERVED_RSRVED		701
+MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK		702
+MX6Q_PAD_ENET_REF_CLK__ESAI1_FSR		703
+MX6Q_PAD_ENET_REF_CLK__SDMA_DBGBUS_DEV4		704
+MX6Q_PAD_ENET_REF_CLK__GPIO_1_23		705
+MX6Q_PAD_ENET_REF_CLK__SPDIF_SRCLK		706
+MX6Q_PAD_ENET_REF_CLK__USBPHY1_RX_SQH		707
+MX6Q_PAD_ENET_RX_ER__ENET_RX_ER			708
+MX6Q_PAD_ENET_RX_ER__ESAI1_HCKR			709
+MX6Q_PAD_ENET_RX_ER__SPDIF_IN1			710
+MX6Q_PAD_ENET_RX_ER__ENET_1588_EVT2_OUT		711
+MX6Q_PAD_ENET_RX_ER__GPIO_1_24			712
+MX6Q_PAD_ENET_RX_ER__PHY_TDI			713
+MX6Q_PAD_ENET_RX_ER__USBPHY1_RX_HS_RXD		714
+MX6Q_PAD_ENET_CRS_DV__RESERVED_RSRVED		715
+MX6Q_PAD_ENET_CRS_DV__ENET_RX_EN		716
+MX6Q_PAD_ENET_CRS_DV__ESAI1_SCKT		717
+MX6Q_PAD_ENET_CRS_DV__SPDIF_EXTCLK		718
+MX6Q_PAD_ENET_CRS_DV__GPIO_1_25			719
+MX6Q_PAD_ENET_CRS_DV__PHY_TDO			720
+MX6Q_PAD_ENET_CRS_DV__USBPHY1_RX_FS_RXD		721
+MX6Q_PAD_ENET_RXD1__MLB_MLBSIG			722
+MX6Q_PAD_ENET_RXD1__ENET_RDATA_1		723
+MX6Q_PAD_ENET_RXD1__ESAI1_FST			724
+MX6Q_PAD_ENET_RXD1__ENET_1588_EVT3_OUT		725
+MX6Q_PAD_ENET_RXD1__GPIO_1_26			726
+MX6Q_PAD_ENET_RXD1__PHY_TCK			727
+MX6Q_PAD_ENET_RXD1__USBPHY1_RX_DISCON		728
+MX6Q_PAD_ENET_RXD0__OSC32K_32K_OUT		729
+MX6Q_PAD_ENET_RXD0__ENET_RDATA_0		730
+MX6Q_PAD_ENET_RXD0__ESAI1_HCKT			731
+MX6Q_PAD_ENET_RXD0__SPDIF_OUT1			732
+MX6Q_PAD_ENET_RXD0__GPIO_1_27			733
+MX6Q_PAD_ENET_RXD0__PHY_TMS			734
+MX6Q_PAD_ENET_RXD0__USBPHY1_PLL_CK20DIV		735
+MX6Q_PAD_ENET_TX_EN__RESERVED_RSRVED		736
+MX6Q_PAD_ENET_TX_EN__ENET_TX_EN			737
+MX6Q_PAD_ENET_TX_EN__ESAI1_TX3_RX2		738
+MX6Q_PAD_ENET_TX_EN__GPIO_1_28			739
+MX6Q_PAD_ENET_TX_EN__SATA_PHY_TDI		740
+MX6Q_PAD_ENET_TX_EN__USBPHY2_RX_SQH		741
+MX6Q_PAD_ENET_TXD1__MLB_MLBCLK			742
+MX6Q_PAD_ENET_TXD1__ENET_TDATA_1		743
+MX6Q_PAD_ENET_TXD1__ESAI1_TX2_RX3		744
+MX6Q_PAD_ENET_TXD1__ENET_1588_EVENT0_IN		745
+MX6Q_PAD_ENET_TXD1__GPIO_1_29			746
+MX6Q_PAD_ENET_TXD1__SATA_PHY_TDO		747
+MX6Q_PAD_ENET_TXD1__USBPHY2_RX_HS_RXD		748
+MX6Q_PAD_ENET_TXD0__RESERVED_RSRVED		749
+MX6Q_PAD_ENET_TXD0__ENET_TDATA_0		750
+MX6Q_PAD_ENET_TXD0__ESAI1_TX4_RX1		751
+MX6Q_PAD_ENET_TXD0__GPIO_1_30			752
+MX6Q_PAD_ENET_TXD0__SATA_PHY_TCK		753
+MX6Q_PAD_ENET_TXD0__USBPHY2_RX_FS_RXD		754
+MX6Q_PAD_ENET_MDC__MLB_MLBDAT			755
+MX6Q_PAD_ENET_MDC__ENET_MDC			756
+MX6Q_PAD_ENET_MDC__ESAI1_TX5_RX0		757
+MX6Q_PAD_ENET_MDC__ENET_1588_EVENT1_IN		758
+MX6Q_PAD_ENET_MDC__GPIO_1_31			759
+MX6Q_PAD_ENET_MDC__SATA_PHY_TMS			760
+MX6Q_PAD_ENET_MDC__USBPHY2_RX_DISCON		761
+MX6Q_PAD_DRAM_D40__MMDC_DRAM_D_40		762
+MX6Q_PAD_DRAM_D41__MMDC_DRAM_D_41		763
+MX6Q_PAD_DRAM_D42__MMDC_DRAM_D_42		764
+MX6Q_PAD_DRAM_D43__MMDC_DRAM_D_43		765
+MX6Q_PAD_DRAM_D44__MMDC_DRAM_D_44		766
+MX6Q_PAD_DRAM_D45__MMDC_DRAM_D_45		767
+MX6Q_PAD_DRAM_D46__MMDC_DRAM_D_46		768
+MX6Q_PAD_DRAM_D47__MMDC_DRAM_D_47		769
+MX6Q_PAD_DRAM_SDQS5__MMDC_DRAM_SDQS_5		770
+MX6Q_PAD_DRAM_DQM5__MMDC_DRAM_DQM_5		771
+MX6Q_PAD_DRAM_D32__MMDC_DRAM_D_32		772
+MX6Q_PAD_DRAM_D33__MMDC_DRAM_D_33		773
+MX6Q_PAD_DRAM_D34__MMDC_DRAM_D_34		774
+MX6Q_PAD_DRAM_D35__MMDC_DRAM_D_35		775
+MX6Q_PAD_DRAM_D36__MMDC_DRAM_D_36		776
+MX6Q_PAD_DRAM_D37__MMDC_DRAM_D_37		777
+MX6Q_PAD_DRAM_D38__MMDC_DRAM_D_38		778
+MX6Q_PAD_DRAM_D39__MMDC_DRAM_D_39		779
+MX6Q_PAD_DRAM_DQM4__MMDC_DRAM_DQM_4		780
+MX6Q_PAD_DRAM_SDQS4__MMDC_DRAM_SDQS_4		781
+MX6Q_PAD_DRAM_D24__MMDC_DRAM_D_24		782
+MX6Q_PAD_DRAM_D25__MMDC_DRAM_D_25		783
+MX6Q_PAD_DRAM_D26__MMDC_DRAM_D_26		784
+MX6Q_PAD_DRAM_D27__MMDC_DRAM_D_27		785
+MX6Q_PAD_DRAM_D28__MMDC_DRAM_D_28		786
+MX6Q_PAD_DRAM_D29__MMDC_DRAM_D_29		787
+MX6Q_PAD_DRAM_SDQS3__MMDC_DRAM_SDQS_3		788
+MX6Q_PAD_DRAM_D30__MMDC_DRAM_D_30		789
+MX6Q_PAD_DRAM_D31__MMDC_DRAM_D_31		790
+MX6Q_PAD_DRAM_DQM3__MMDC_DRAM_DQM_3		791
+MX6Q_PAD_DRAM_D16__MMDC_DRAM_D_16		792
+MX6Q_PAD_DRAM_D17__MMDC_DRAM_D_17		793
+MX6Q_PAD_DRAM_D18__MMDC_DRAM_D_18		794
+MX6Q_PAD_DRAM_D19__MMDC_DRAM_D_19		795
+MX6Q_PAD_DRAM_D20__MMDC_DRAM_D_20		796
+MX6Q_PAD_DRAM_D21__MMDC_DRAM_D_21		797
+MX6Q_PAD_DRAM_D22__MMDC_DRAM_D_22		798
+MX6Q_PAD_DRAM_SDQS2__MMDC_DRAM_SDQS_2		799
+MX6Q_PAD_DRAM_D23__MMDC_DRAM_D_23		800
+MX6Q_PAD_DRAM_DQM2__MMDC_DRAM_DQM_2		801
+MX6Q_PAD_DRAM_A0__MMDC_DRAM_A_0			802
+MX6Q_PAD_DRAM_A1__MMDC_DRAM_A_1			803
+MX6Q_PAD_DRAM_A2__MMDC_DRAM_A_2			804
+MX6Q_PAD_DRAM_A3__MMDC_DRAM_A_3			805
+MX6Q_PAD_DRAM_A4__MMDC_DRAM_A_4			806
+MX6Q_PAD_DRAM_A5__MMDC_DRAM_A_5			807
+MX6Q_PAD_DRAM_A6__MMDC_DRAM_A_6			808
+MX6Q_PAD_DRAM_A7__MMDC_DRAM_A_7			809
+MX6Q_PAD_DRAM_A8__MMDC_DRAM_A_8			810
+MX6Q_PAD_DRAM_A9__MMDC_DRAM_A_9			811
+MX6Q_PAD_DRAM_A10__MMDC_DRAM_A_10		812
+MX6Q_PAD_DRAM_A11__MMDC_DRAM_A_11		813
+MX6Q_PAD_DRAM_A12__MMDC_DRAM_A_12		814
+MX6Q_PAD_DRAM_A13__MMDC_DRAM_A_13		815
+MX6Q_PAD_DRAM_A14__MMDC_DRAM_A_14		816
+MX6Q_PAD_DRAM_A15__MMDC_DRAM_A_15		817
+MX6Q_PAD_DRAM_CAS__MMDC_DRAM_CAS		818
+MX6Q_PAD_DRAM_CS0__MMDC_DRAM_CS_0		819
+MX6Q_PAD_DRAM_CS1__MMDC_DRAM_CS_1		820
+MX6Q_PAD_DRAM_RAS__MMDC_DRAM_RAS		821
+MX6Q_PAD_DRAM_RESET__MMDC_DRAM_RESET		822
+MX6Q_PAD_DRAM_SDBA0__MMDC_DRAM_SDBA_0		823
+MX6Q_PAD_DRAM_SDBA1__MMDC_DRAM_SDBA_1		824
+MX6Q_PAD_DRAM_SDCLK_0__MMDC_DRAM_SDCLK0		825
+MX6Q_PAD_DRAM_SDBA2__MMDC_DRAM_SDBA_2		826
+MX6Q_PAD_DRAM_SDCKE0__MMDC_DRAM_SDCKE_0		827
+MX6Q_PAD_DRAM_SDCLK_1__MMDC_DRAM_SDCLK1		828
+MX6Q_PAD_DRAM_SDCKE1__MMDC_DRAM_SDCKE_1		829
+MX6Q_PAD_DRAM_SDODT0__MMDC_DRAM_ODT_0		830
+MX6Q_PAD_DRAM_SDODT1__MMDC_DRAM_ODT_1		831
+MX6Q_PAD_DRAM_SDWE__MMDC_DRAM_SDWE		832
+MX6Q_PAD_DRAM_D0__MMDC_DRAM_D_0			833
+MX6Q_PAD_DRAM_D1__MMDC_DRAM_D_1			834
+MX6Q_PAD_DRAM_D2__MMDC_DRAM_D_2			835
+MX6Q_PAD_DRAM_D3__MMDC_DRAM_D_3			836
+MX6Q_PAD_DRAM_D4__MMDC_DRAM_D_4			837
+MX6Q_PAD_DRAM_D5__MMDC_DRAM_D_5			838
+MX6Q_PAD_DRAM_SDQS0__MMDC_DRAM_SDQS_0		839
+MX6Q_PAD_DRAM_D6__MMDC_DRAM_D_6			840
+MX6Q_PAD_DRAM_D7__MMDC_DRAM_D_7			841
+MX6Q_PAD_DRAM_DQM0__MMDC_DRAM_DQM_0		842
+MX6Q_PAD_DRAM_D8__MMDC_DRAM_D_8			843
+MX6Q_PAD_DRAM_D9__MMDC_DRAM_D_9			844
+MX6Q_PAD_DRAM_D10__MMDC_DRAM_D_10		845
+MX6Q_PAD_DRAM_D11__MMDC_DRAM_D_11		846
+MX6Q_PAD_DRAM_D12__MMDC_DRAM_D_12		847
+MX6Q_PAD_DRAM_D13__MMDC_DRAM_D_13		848
+MX6Q_PAD_DRAM_D14__MMDC_DRAM_D_14		849
+MX6Q_PAD_DRAM_SDQS1__MMDC_DRAM_SDQS_1		850
+MX6Q_PAD_DRAM_D15__MMDC_DRAM_D_15		851
+MX6Q_PAD_DRAM_DQM1__MMDC_DRAM_DQM_1		852
+MX6Q_PAD_DRAM_D48__MMDC_DRAM_D_48		853
+MX6Q_PAD_DRAM_D49__MMDC_DRAM_D_49		854
+MX6Q_PAD_DRAM_D50__MMDC_DRAM_D_50		855
+MX6Q_PAD_DRAM_D51__MMDC_DRAM_D_51		856
+MX6Q_PAD_DRAM_D52__MMDC_DRAM_D_52		857
+MX6Q_PAD_DRAM_D53__MMDC_DRAM_D_53		858
+MX6Q_PAD_DRAM_D54__MMDC_DRAM_D_54		859
+MX6Q_PAD_DRAM_D55__MMDC_DRAM_D_55		860
+MX6Q_PAD_DRAM_SDQS6__MMDC_DRAM_SDQS_6		861
+MX6Q_PAD_DRAM_DQM6__MMDC_DRAM_DQM_6		862
+MX6Q_PAD_DRAM_D56__MMDC_DRAM_D_56		863
+MX6Q_PAD_DRAM_SDQS7__MMDC_DRAM_SDQS_7		864
+MX6Q_PAD_DRAM_D57__MMDC_DRAM_D_57		865
+MX6Q_PAD_DRAM_D58__MMDC_DRAM_D_58		866
+MX6Q_PAD_DRAM_D59__MMDC_DRAM_D_59		867
+MX6Q_PAD_DRAM_D60__MMDC_DRAM_D_60		868
+MX6Q_PAD_DRAM_DQM7__MMDC_DRAM_DQM_7		869
+MX6Q_PAD_DRAM_D61__MMDC_DRAM_D_61		870
+MX6Q_PAD_DRAM_D62__MMDC_DRAM_D_62		871
+MX6Q_PAD_DRAM_D63__MMDC_DRAM_D_63		872
+MX6Q_PAD_KEY_COL0__ECSPI1_SCLK			873
+MX6Q_PAD_KEY_COL0__ENET_RDATA_3			874
+MX6Q_PAD_KEY_COL0__AUDMUX_AUD5_TXC		875
+MX6Q_PAD_KEY_COL0__KPP_COL_0			876
+MX6Q_PAD_KEY_COL0__UART4_TXD			877
+MX6Q_PAD_KEY_COL0__GPIO_4_6			878
+MX6Q_PAD_KEY_COL0__DCIC1_DCIC_OUT		879
+MX6Q_PAD_KEY_COL0__SRC_ANY_PU_RST		880
+MX6Q_PAD_KEY_ROW0__ECSPI1_MOSI			881
+MX6Q_PAD_KEY_ROW0__ENET_TDATA_3			882
+MX6Q_PAD_KEY_ROW0__AUDMUX_AUD5_TXD		883
+MX6Q_PAD_KEY_ROW0__KPP_ROW_0			884
+MX6Q_PAD_KEY_ROW0__UART4_RXD			885
+MX6Q_PAD_KEY_ROW0__GPIO_4_7			886
+MX6Q_PAD_KEY_ROW0__DCIC2_DCIC_OUT		887
+MX6Q_PAD_KEY_ROW0__PL301_PER1_HADR_0		888
+MX6Q_PAD_KEY_COL1__ECSPI1_MISO			889
+MX6Q_PAD_KEY_COL1__ENET_MDIO			890
+MX6Q_PAD_KEY_COL1__AUDMUX_AUD5_TXFS		891
+MX6Q_PAD_KEY_COL1__KPP_COL_1			892
+MX6Q_PAD_KEY_COL1__UART5_TXD			893
+MX6Q_PAD_KEY_COL1__GPIO_4_8			894
+MX6Q_PAD_KEY_COL1__USDHC1_VSELECT		895
+MX6Q_PAD_KEY_COL1__PL301MX_PER1_HADR_1		896
+MX6Q_PAD_KEY_ROW1__ECSPI1_SS0			897
+MX6Q_PAD_KEY_ROW1__ENET_COL			898
+MX6Q_PAD_KEY_ROW1__AUDMUX_AUD5_RXD		899
+MX6Q_PAD_KEY_ROW1__KPP_ROW_1			900
+MX6Q_PAD_KEY_ROW1__UART5_RXD			901
+MX6Q_PAD_KEY_ROW1__GPIO_4_9			902
+MX6Q_PAD_KEY_ROW1__USDHC2_VSELECT		903
+MX6Q_PAD_KEY_ROW1__PL301_PER1_HADDR_2		904
+MX6Q_PAD_KEY_COL2__ECSPI1_SS1			905
+MX6Q_PAD_KEY_COL2__ENET_RDATA_2			906
+MX6Q_PAD_KEY_COL2__CAN1_TXCAN			907
+MX6Q_PAD_KEY_COL2__KPP_COL_2			908
+MX6Q_PAD_KEY_COL2__ENET_MDC			909
+MX6Q_PAD_KEY_COL2__GPIO_4_10			910
+MX6Q_PAD_KEY_COL2__USBOH3_H1_PWRCTL_WKP		911
+MX6Q_PAD_KEY_COL2__PL301_PER1_HADDR_3		912
+MX6Q_PAD_KEY_ROW2__ECSPI1_SS2			913
+MX6Q_PAD_KEY_ROW2__ENET_TDATA_2			914
+MX6Q_PAD_KEY_ROW2__CAN1_RXCAN			915
+MX6Q_PAD_KEY_ROW2__KPP_ROW_2			916
+MX6Q_PAD_KEY_ROW2__USDHC2_VSELECT		917
+MX6Q_PAD_KEY_ROW2__GPIO_4_11			918
+MX6Q_PAD_KEY_ROW2__HDMI_TX_CEC_LINE		919
+MX6Q_PAD_KEY_ROW2__PL301_PER1_HADR_4		920
+MX6Q_PAD_KEY_COL3__ECSPI1_SS3			921
+MX6Q_PAD_KEY_COL3__ENET_CRS			922
+MX6Q_PAD_KEY_COL3__HDMI_TX_DDC_SCL		923
+MX6Q_PAD_KEY_COL3__KPP_COL_3			924
+MX6Q_PAD_KEY_COL3__I2C2_SCL			925
+MX6Q_PAD_KEY_COL3__GPIO_4_12			926
+MX6Q_PAD_KEY_COL3__SPDIF_IN1			927
+MX6Q_PAD_KEY_COL3__PL301_PER1_HADR_5		928
+MX6Q_PAD_KEY_ROW3__OSC32K_32K_OUT		929
+MX6Q_PAD_KEY_ROW3__ASRC_ASRC_EXT_CLK		930
+MX6Q_PAD_KEY_ROW3__HDMI_TX_DDC_SDA		931
+MX6Q_PAD_KEY_ROW3__KPP_ROW_3			932
+MX6Q_PAD_KEY_ROW3__I2C2_SDA			933
+MX6Q_PAD_KEY_ROW3__GPIO_4_13			934
+MX6Q_PAD_KEY_ROW3__USDHC1_VSELECT		935
+MX6Q_PAD_KEY_ROW3__PL301_PER1_HADR_6		936
+MX6Q_PAD_KEY_COL4__CAN2_TXCAN			937
+MX6Q_PAD_KEY_COL4__IPU1_SISG_4			938
+MX6Q_PAD_KEY_COL4__USBOH3_USBOTG_OC		939
+MX6Q_PAD_KEY_COL4__KPP_COL_4			940
+MX6Q_PAD_KEY_COL4__UART5_RTS			941
+MX6Q_PAD_KEY_COL4__GPIO_4_14			942
+MX6Q_PAD_KEY_COL4__MMDC_DEBUG_49		943
+MX6Q_PAD_KEY_COL4__PL301_PER1_HADDR_7		944
+MX6Q_PAD_KEY_ROW4__CAN2_RXCAN			945
+MX6Q_PAD_KEY_ROW4__IPU1_SISG_5			946
+MX6Q_PAD_KEY_ROW4__USBOH3_USBOTG_PWR		947
+MX6Q_PAD_KEY_ROW4__KPP_ROW_4			948
+MX6Q_PAD_KEY_ROW4__UART5_CTS			949
+MX6Q_PAD_KEY_ROW4__GPIO_4_15			950
+MX6Q_PAD_KEY_ROW4__MMDC_DEBUG_50		951
+MX6Q_PAD_KEY_ROW4__PL301_PER1_HADR_8		952
+MX6Q_PAD_GPIO_0__CCM_CLKO			953
+MX6Q_PAD_GPIO_0__KPP_COL_5			954
+MX6Q_PAD_GPIO_0__ASRC_ASRC_EXT_CLK		955
+MX6Q_PAD_GPIO_0__EPIT1_EPITO			956
+MX6Q_PAD_GPIO_0__GPIO_1_0			957
+MX6Q_PAD_GPIO_0__USBOH3_USBH1_PWR		958
+MX6Q_PAD_GPIO_0__SNVS_HP_WRAP_SNVS_VIO5		959
+MX6Q_PAD_GPIO_1__ESAI1_SCKR			960
+MX6Q_PAD_GPIO_1__WDOG2_WDOG_B			961
+MX6Q_PAD_GPIO_1__KPP_ROW_5			962
+MX6Q_PAD_GPIO_1__PWM2_PWMO			963
+MX6Q_PAD_GPIO_1__GPIO_1_1			964
+MX6Q_PAD_GPIO_1__USDHC1_CD			965
+MX6Q_PAD_GPIO_1__SRC_TESTER_ACK			966
+MX6Q_PAD_GPIO_9__ESAI1_FSR			967
+MX6Q_PAD_GPIO_9__WDOG1_WDOG_B			968
+MX6Q_PAD_GPIO_9__KPP_COL_6			969
+MX6Q_PAD_GPIO_9__CCM_REF_EN_B			970
+MX6Q_PAD_GPIO_9__PWM1_PWMO			971
+MX6Q_PAD_GPIO_9__GPIO_1_9			972
+MX6Q_PAD_GPIO_9__USDHC1_WP			973
+MX6Q_PAD_GPIO_9__SRC_EARLY_RST			974
+MX6Q_PAD_GPIO_3__ESAI1_HCKR			975
+MX6Q_PAD_GPIO_3__OBSERVE_MUX_INT_OUT0		976
+MX6Q_PAD_GPIO_3__I2C3_SCL			977
+MX6Q_PAD_GPIO_3__ANATOP_24M_OUT			978
+MX6Q_PAD_GPIO_3__CCM_CLKO2			979
+MX6Q_PAD_GPIO_3__GPIO_1_3			980
+MX6Q_PAD_GPIO_3__USBOH3_USBH1_OC		981
+MX6Q_PAD_GPIO_3__MLB_MLBCLK			982
+MX6Q_PAD_GPIO_6__ESAI1_SCKT			983
+MX6Q_PAD_GPIO_6__OBSERVE_MUX_INT_OUT1		984
+MX6Q_PAD_GPIO_6__I2C3_SDA			985
+MX6Q_PAD_GPIO_6__CCM_CCM_OUT_0			986
+MX6Q_PAD_GPIO_6__CSU_CSU_INT_DEB		987
+MX6Q_PAD_GPIO_6__GPIO_1_6			988
+MX6Q_PAD_GPIO_6__USDHC2_LCTL			989
+MX6Q_PAD_GPIO_6__MLB_MLBSIG			990
+MX6Q_PAD_GPIO_2__ESAI1_FST			991
+MX6Q_PAD_GPIO_2__OBSERVE_MUX_INT_OUT2		992
+MX6Q_PAD_GPIO_2__KPP_ROW_6			993
+MX6Q_PAD_GPIO_2__CCM_CCM_OUT_1			994
+MX6Q_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0		995
+MX6Q_PAD_GPIO_2__GPIO_1_2			996
+MX6Q_PAD_GPIO_2__USDHC2_WP			997
+MX6Q_PAD_GPIO_2__MLB_MLBDAT			998
+MX6Q_PAD_GPIO_4__ESAI1_HCKT			999
+MX6Q_PAD_GPIO_4__OBSERVE_MUX_INT_OUT3		1000
+MX6Q_PAD_GPIO_4__KPP_COL_7			1001
+MX6Q_PAD_GPIO_4__CCM_CCM_OUT_2			1002
+MX6Q_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1		1003
+MX6Q_PAD_GPIO_4__GPIO_1_4			1004
+MX6Q_PAD_GPIO_4__USDHC2_CD			1005
+MX6Q_PAD_GPIO_4__OCOTP_CRL_WRAR_FUSE_LA		1006
+MX6Q_PAD_GPIO_5__ESAI1_TX2_RX3			1007
+MX6Q_PAD_GPIO_5__OBSERVE_MUX_INT_OUT4		1008
+MX6Q_PAD_GPIO_5__KPP_ROW_7			1009
+MX6Q_PAD_GPIO_5__CCM_CLKO			1010
+MX6Q_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2		1011
+MX6Q_PAD_GPIO_5__GPIO_1_5			1012
+MX6Q_PAD_GPIO_5__I2C3_SCL			1013
+MX6Q_PAD_GPIO_5__CHEETAH_EVENTI			1014
+MX6Q_PAD_GPIO_7__ESAI1_TX4_RX1			1015
+MX6Q_PAD_GPIO_7__ECSPI5_RDY			1016
+MX6Q_PAD_GPIO_7__EPIT1_EPITO			1017
+MX6Q_PAD_GPIO_7__CAN1_TXCAN			1018
+MX6Q_PAD_GPIO_7__UART2_TXD			1019
+MX6Q_PAD_GPIO_7__GPIO_1_7			1020
+MX6Q_PAD_GPIO_7__SPDIF_PLOCK			1021
+MX6Q_PAD_GPIO_7__USBOH3_OTGUSB_HST_MODE		1022
+MX6Q_PAD_GPIO_8__ESAI1_TX5_RX0			1023
+MX6Q_PAD_GPIO_8__ANATOP_ANATOP_32K_OUT		1024
+MX6Q_PAD_GPIO_8__EPIT2_EPITO			1025
+MX6Q_PAD_GPIO_8__CAN1_RXCAN			1026
+MX6Q_PAD_GPIO_8__UART2_RXD			1027
+MX6Q_PAD_GPIO_8__GPIO_1_8			1028
+MX6Q_PAD_GPIO_8__SPDIF_SRCLK			1029
+MX6Q_PAD_GPIO_8__USBOH3_OTG_PWRCTL_WAK		1030
+MX6Q_PAD_GPIO_16__ESAI1_TX3_RX2			1031
+MX6Q_PAD_GPIO_16__ENET_1588_EVENT2_IN		1032
+MX6Q_PAD_GPIO_16__ENET_ETHERNET_REF_OUT		1033
+MX6Q_PAD_GPIO_16__USDHC1_LCTL			1034
+MX6Q_PAD_GPIO_16__SPDIF_IN1			1035
+MX6Q_PAD_GPIO_16__GPIO_7_11			1036
+MX6Q_PAD_GPIO_16__I2C3_SDA			1037
+MX6Q_PAD_GPIO_16__SJC_DE_B			1038
+MX6Q_PAD_GPIO_17__ESAI1_TX0			1039
+MX6Q_PAD_GPIO_17__ENET_1588_EVENT3_IN		1040
+MX6Q_PAD_GPIO_17__CCM_PMIC_RDY			1041
+MX6Q_PAD_GPIO_17__SDMA_SDMA_EXT_EVENT_0		1042
+MX6Q_PAD_GPIO_17__SPDIF_OUT1			1043
+MX6Q_PAD_GPIO_17__GPIO_7_12			1044
+MX6Q_PAD_GPIO_17__SJC_JTAG_ACT			1045
+MX6Q_PAD_GPIO_18__ESAI1_TX1			1046
+MX6Q_PAD_GPIO_18__ENET_RX_CLK			1047
+MX6Q_PAD_GPIO_18__USDHC3_VSELECT		1048
+MX6Q_PAD_GPIO_18__SDMA_SDMA_EXT_EVENT_1		1049
+MX6Q_PAD_GPIO_18__ASRC_ASRC_EXT_CLK		1050
+MX6Q_PAD_GPIO_18__GPIO_7_13			1051
+MX6Q_PAD_GPIO_18__SNVS_HP_WRA_SNVS_VIO5		1052
+MX6Q_PAD_GPIO_18__SRC_SYSTEM_RST		1053
+MX6Q_PAD_GPIO_19__KPP_COL_5			1054
+MX6Q_PAD_GPIO_19__ENET_1588_EVENT0_OUT		1055
+MX6Q_PAD_GPIO_19__SPDIF_OUT1			1056
+MX6Q_PAD_GPIO_19__CCM_CLKO			1057
+MX6Q_PAD_GPIO_19__ECSPI1_RDY			1058
+MX6Q_PAD_GPIO_19__GPIO_4_5			1059
+MX6Q_PAD_GPIO_19__ENET_TX_ER			1060
+MX6Q_PAD_GPIO_19__SRC_INT_BOOT			1061
+MX6Q_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK		1062
+MX6Q_PAD_CSI0_PIXCLK__PCIE_CTRL_MUX_12		1063
+MX6Q_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0		1064
+MX6Q_PAD_CSI0_PIXCLK__GPIO_5_18			1065
+MX6Q_PAD_CSI0_PIXCLK___MMDC_DEBUG_29		1066
+MX6Q_PAD_CSI0_PIXCLK__CHEETAH_EVENTO		1067
+MX6Q_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC		1068
+MX6Q_PAD_CSI0_MCLK__PCIE_CTRL_MUX_13		1069
+MX6Q_PAD_CSI0_MCLK__CCM_CLKO			1070
+MX6Q_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1		1071
+MX6Q_PAD_CSI0_MCLK__GPIO_5_19			1072
+MX6Q_PAD_CSI0_MCLK__MMDC_MMDC_DEBUG_30		1073
+MX6Q_PAD_CSI0_MCLK__CHEETAH_TRCTL		1074
+MX6Q_PAD_CSI0_DATA_EN__IPU1_CSI0_DA_EN		1075
+MX6Q_PAD_CSI0_DATA_EN__WEIM_WEIM_D_0		1076
+MX6Q_PAD_CSI0_DATA_EN__PCIE_CTRL_MUX_14		1077
+MX6Q_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2		1078
+MX6Q_PAD_CSI0_DATA_EN__GPIO_5_20		1079
+MX6Q_PAD_CSI0_DATA_EN__MMDC_DEBUG_31		1080
+MX6Q_PAD_CSI0_DATA_EN__CHEETAH_TRCLK		1081
+MX6Q_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC		1082
+MX6Q_PAD_CSI0_VSYNC__WEIM_WEIM_D_1		1083
+MX6Q_PAD_CSI0_VSYNC__PCIE_CTRL_MUX_15		1084
+MX6Q_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3		1085
+MX6Q_PAD_CSI0_VSYNC__GPIO_5_21			1086
+MX6Q_PAD_CSI0_VSYNC__MMDC_DEBUG_32		1087
+MX6Q_PAD_CSI0_VSYNC__CHEETAH_TRACE_0		1088
+MX6Q_PAD_CSI0_DAT4__IPU1_CSI0_D_4		1089
+MX6Q_PAD_CSI0_DAT4__WEIM_WEIM_D_2		1090
+MX6Q_PAD_CSI0_DAT4__ECSPI1_SCLK			1091
+MX6Q_PAD_CSI0_DAT4__KPP_COL_5			1092
+MX6Q_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC		1093
+MX6Q_PAD_CSI0_DAT4__GPIO_5_22			1094
+MX6Q_PAD_CSI0_DAT4__MMDC_DEBUG_43		1095
+MX6Q_PAD_CSI0_DAT4__CHEETAH_TRACE_1		1096
+MX6Q_PAD_CSI0_DAT5__IPU1_CSI0_D_5		1097
+MX6Q_PAD_CSI0_DAT5__WEIM_WEIM_D_3		1098
+MX6Q_PAD_CSI0_DAT5__ECSPI1_MOSI			1099
+MX6Q_PAD_CSI0_DAT5__KPP_ROW_5			1100
+MX6Q_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD		1101
+MX6Q_PAD_CSI0_DAT5__GPIO_5_23			1102
+MX6Q_PAD_CSI0_DAT5__MMDC_MMDC_DEBUG_44		1103
+MX6Q_PAD_CSI0_DAT5__CHEETAH_TRACE_2		1104
+MX6Q_PAD_CSI0_DAT6__IPU1_CSI0_D_6		1105
+MX6Q_PAD_CSI0_DAT6__WEIM_WEIM_D_4		1106
+MX6Q_PAD_CSI0_DAT6__ECSPI1_MISO			1107
+MX6Q_PAD_CSI0_DAT6__KPP_COL_6			1108
+MX6Q_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS		1109
+MX6Q_PAD_CSI0_DAT6__GPIO_5_24			1110
+MX6Q_PAD_CSI0_DAT6__MMDC_MMDC_DEBUG_45		1111
+MX6Q_PAD_CSI0_DAT6__CHEETAH_TRACE_3		1112
+MX6Q_PAD_CSI0_DAT7__IPU1_CSI0_D_7		1113
+MX6Q_PAD_CSI0_DAT7__WEIM_WEIM_D_5		1114
+MX6Q_PAD_CSI0_DAT7__ECSPI1_SS0			1115
+MX6Q_PAD_CSI0_DAT7__KPP_ROW_6			1116
+MX6Q_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD		1117
+MX6Q_PAD_CSI0_DAT7__GPIO_5_25			1118
+MX6Q_PAD_CSI0_DAT7__MMDC_MMDC_DEBUG_46		1119
+MX6Q_PAD_CSI0_DAT7__CHEETAH_TRACE_4		1120
+MX6Q_PAD_CSI0_DAT8__IPU1_CSI0_D_8		1121
+MX6Q_PAD_CSI0_DAT8__WEIM_WEIM_D_6		1122
+MX6Q_PAD_CSI0_DAT8__ECSPI2_SCLK			1123
+MX6Q_PAD_CSI0_DAT8__KPP_COL_7			1124
+MX6Q_PAD_CSI0_DAT8__I2C1_SDA			1125
+MX6Q_PAD_CSI0_DAT8__GPIO_5_26			1126
+MX6Q_PAD_CSI0_DAT8__MMDC_MMDC_DEBUG_47		1127
+MX6Q_PAD_CSI0_DAT8__CHEETAH_TRACE_5		1128
+MX6Q_PAD_CSI0_DAT9__IPU1_CSI0_D_9		1129
+MX6Q_PAD_CSI0_DAT9__WEIM_WEIM_D_7		1130
+MX6Q_PAD_CSI0_DAT9__ECSPI2_MOSI			1131
+MX6Q_PAD_CSI0_DAT9__KPP_ROW_7			1132
+MX6Q_PAD_CSI0_DAT9__I2C1_SCL			1133
+MX6Q_PAD_CSI0_DAT9__GPIO_5_27			1134
+MX6Q_PAD_CSI0_DAT9__MMDC_MMDC_DEBUG_48		1135
+MX6Q_PAD_CSI0_DAT9__CHEETAH_TRACE_6		1136
+MX6Q_PAD_CSI0_DAT10__IPU1_CSI0_D_10		1137
+MX6Q_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC		1138
+MX6Q_PAD_CSI0_DAT10__ECSPI2_MISO		1139
+MX6Q_PAD_CSI0_DAT10__UART1_TXD			1140
+MX6Q_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4		1141
+MX6Q_PAD_CSI0_DAT10__GPIO_5_28			1142
+MX6Q_PAD_CSI0_DAT10__MMDC_MMDC_DEBUG_33		1143
+MX6Q_PAD_CSI0_DAT10__CHEETAH_TRACE_7		1144
+MX6Q_PAD_CSI0_DAT11__IPU1_CSI0_D_11		1145
+MX6Q_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS		1146
+MX6Q_PAD_CSI0_DAT11__ECSPI2_SS0			1147
+MX6Q_PAD_CSI0_DAT11__UART1_RXD			1148
+MX6Q_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5		1149
+MX6Q_PAD_CSI0_DAT11__GPIO_5_29			1150
+MX6Q_PAD_CSI0_DAT11__MMDC_MMDC_DEBUG_34		1151
+MX6Q_PAD_CSI0_DAT11__CHEETAH_TRACE_8		1152
+MX6Q_PAD_CSI0_DAT12__IPU1_CSI0_D_12		1153
+MX6Q_PAD_CSI0_DAT12__WEIM_WEIM_D_8		1154
+MX6Q_PAD_CSI0_DAT12__PCIE_CTRL_MUX_16		1155
+MX6Q_PAD_CSI0_DAT12__UART4_TXD			1156
+MX6Q_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6		1157
+MX6Q_PAD_CSI0_DAT12__GPIO_5_30			1158
+MX6Q_PAD_CSI0_DAT12__MMDC_MMDC_DEBUG_35		1159
+MX6Q_PAD_CSI0_DAT12__CHEETAH_TRACE_9		1160
+MX6Q_PAD_CSI0_DAT13__IPU1_CSI0_D_13		1161
+MX6Q_PAD_CSI0_DAT13__WEIM_WEIM_D_9		1162
+MX6Q_PAD_CSI0_DAT13__PCIE_CTRL_MUX_17		1163
+MX6Q_PAD_CSI0_DAT13__UART4_RXD			1164
+MX6Q_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7		1165
+MX6Q_PAD_CSI0_DAT13__GPIO_5_31			1166
+MX6Q_PAD_CSI0_DAT13__MMDC_MMDC_DEBUG_36		1167
+MX6Q_PAD_CSI0_DAT13__CHEETAH_TRACE_10		1168
+MX6Q_PAD_CSI0_DAT14__IPU1_CSI0_D_14		1169
+MX6Q_PAD_CSI0_DAT14__WEIM_WEIM_D_10		1170
+MX6Q_PAD_CSI0_DAT14__PCIE_CTRL_MUX_18		1171
+MX6Q_PAD_CSI0_DAT14__UART5_TXD			1172
+MX6Q_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8		1173
+MX6Q_PAD_CSI0_DAT14__GPIO_6_0			1174
+MX6Q_PAD_CSI0_DAT14__MMDC_MMDC_DEBUG_37		1175
+MX6Q_PAD_CSI0_DAT14__CHEETAH_TRACE_11		1176
+MX6Q_PAD_CSI0_DAT15__IPU1_CSI0_D_15		1177
+MX6Q_PAD_CSI0_DAT15__WEIM_WEIM_D_11		1178
+MX6Q_PAD_CSI0_DAT15__PCIE_CTRL_MUX_19		1179
+MX6Q_PAD_CSI0_DAT15__UART5_RXD			1180
+MX6Q_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9		1181
+MX6Q_PAD_CSI0_DAT15__GPIO_6_1			1182
+MX6Q_PAD_CSI0_DAT15__MMDC_MMDC_DEBUG_38		1183
+MX6Q_PAD_CSI0_DAT15__CHEETAH_TRACE_12		1184
+MX6Q_PAD_CSI0_DAT16__IPU1_CSI0_D_16		1185
+MX6Q_PAD_CSI0_DAT16__WEIM_WEIM_D_12		1186
+MX6Q_PAD_CSI0_DAT16__PCIE_CTRL_MUX_20		1187
+MX6Q_PAD_CSI0_DAT16__UART4_RTS			1188
+MX6Q_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10		1189
+MX6Q_PAD_CSI0_DAT16__GPIO_6_2			1190
+MX6Q_PAD_CSI0_DAT16__MMDC_MMDC_DEBUG_39		1191
+MX6Q_PAD_CSI0_DAT16__CHEETAH_TRACE_13		1192
+MX6Q_PAD_CSI0_DAT17__IPU1_CSI0_D_17		1193
+MX6Q_PAD_CSI0_DAT17__WEIM_WEIM_D_13		1194
+MX6Q_PAD_CSI0_DAT17__PCIE_CTRL_MUX_21		1195
+MX6Q_PAD_CSI0_DAT17__UART4_CTS			1196
+MX6Q_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11		1197
+MX6Q_PAD_CSI0_DAT17__GPIO_6_3			1198
+MX6Q_PAD_CSI0_DAT17__MMDC_MMDC_DEBUG_40		1199
+MX6Q_PAD_CSI0_DAT17__CHEETAH_TRACE_14		1200
+MX6Q_PAD_CSI0_DAT18__IPU1_CSI0_D_18		1201
+MX6Q_PAD_CSI0_DAT18__WEIM_WEIM_D_14		1202
+MX6Q_PAD_CSI0_DAT18__PCIE_CTRL_MUX_22		1203
+MX6Q_PAD_CSI0_DAT18__UART5_RTS			1204
+MX6Q_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12		1205
+MX6Q_PAD_CSI0_DAT18__GPIO_6_4			1206
+MX6Q_PAD_CSI0_DAT18__MMDC_MMDC_DEBUG_41		1207
+MX6Q_PAD_CSI0_DAT18__CHEETAH_TRACE_15		1208
+MX6Q_PAD_CSI0_DAT19__IPU1_CSI0_D_19		1209
+MX6Q_PAD_CSI0_DAT19__WEIM_WEIM_D_15		1210
+MX6Q_PAD_CSI0_DAT19__PCIE_CTRL_MUX_23		1211
+MX6Q_PAD_CSI0_DAT19__UART5_CTS			1212
+MX6Q_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13		1213
+MX6Q_PAD_CSI0_DAT19__GPIO_6_5			1214
+MX6Q_PAD_CSI0_DAT19__MMDC_MMDC_DEBUG_42		1215
+MX6Q_PAD_CSI0_DAT19__ANATOP_TESTO_9		1216
+MX6Q_PAD_JTAG_TMS__SJC_TMS			1217
+MX6Q_PAD_JTAG_MOD__SJC_MOD			1218
+MX6Q_PAD_JTAG_TRSTB__SJC_TRSTB			1219
+MX6Q_PAD_JTAG_TDI__SJC_TDI			1220
+MX6Q_PAD_JTAG_TCK__SJC_TCK			1221
+MX6Q_PAD_JTAG_TDO__SJC_TDO			1222
+MX6Q_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3		1223
+MX6Q_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2		1224
+MX6Q_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK		1225
+MX6Q_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1		1226
+MX6Q_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0		1227
+MX6Q_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3		1228
+MX6Q_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK		1229
+MX6Q_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2		1230
+MX6Q_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1		1231
+MX6Q_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0		1232
+MX6Q_PAD_TAMPER__SNVS_LP_WRAP_SNVS_TD1		1233
+MX6Q_PAD_PMIC_ON_REQ__SNVS_LPWRAP_WKALM		1234
+MX6Q_PAD_PMIC_STBY_REQ__CCM_PMIC_STBYRQ		1235
+MX6Q_PAD_POR_B__SRC_POR_B			1236
+MX6Q_PAD_BOOT_MODE1__SRC_BOOT_MODE_1		1237
+MX6Q_PAD_RESET_IN_B__SRC_RESET_B		1238
+MX6Q_PAD_BOOT_MODE0__SRC_BOOT_MODE_0		1239
+MX6Q_PAD_TEST_MODE__TCU_TEST_MODE		1240
+MX6Q_PAD_SD3_DAT7__USDHC3_DAT7			1241
+MX6Q_PAD_SD3_DAT7__UART1_TXD			1242
+MX6Q_PAD_SD3_DAT7__PCIE_CTRL_MUX_24		1243
+MX6Q_PAD_SD3_DAT7__USBOH3_UH3_DFD_OUT_0		1244
+MX6Q_PAD_SD3_DAT7__USBOH3_UH2_DFD_OUT_0		1245
+MX6Q_PAD_SD3_DAT7__GPIO_6_17			1246
+MX6Q_PAD_SD3_DAT7__MIPI_CORE_DPHY_IN_12		1247
+MX6Q_PAD_SD3_DAT7__USBPHY2_CLK20DIV		1248
+MX6Q_PAD_SD3_DAT6__USDHC3_DAT6			1249
+MX6Q_PAD_SD3_DAT6__UART1_RXD			1250
+MX6Q_PAD_SD3_DAT6__PCIE_CTRL_MUX_25		1251
+MX6Q_PAD_SD3_DAT6__USBOH3_UH3_DFD_OUT_1		1252
+MX6Q_PAD_SD3_DAT6__USBOH3_UH2_DFD_OUT_1		1253
+MX6Q_PAD_SD3_DAT6__GPIO_6_18			1254
+MX6Q_PAD_SD3_DAT6__MIPI_CORE_DPHY_IN_13		1255
+MX6Q_PAD_SD3_DAT6__ANATOP_TESTO_10		1256
+MX6Q_PAD_SD3_DAT5__USDHC3_DAT5			1257
+MX6Q_PAD_SD3_DAT5__UART2_TXD			1258
+MX6Q_PAD_SD3_DAT5__PCIE_CTRL_MUX_26		1259
+MX6Q_PAD_SD3_DAT5__USBOH3_UH3_DFD_OUT_2		1260
+MX6Q_PAD_SD3_DAT5__USBOH3_UH2_DFD_OUT_2		1261
+MX6Q_PAD_SD3_DAT5__GPIO_7_0			1262
+MX6Q_PAD_SD3_DAT5__MIPI_CORE_DPHY_IN_14		1263
+MX6Q_PAD_SD3_DAT5__ANATOP_TESTO_11		1264
+MX6Q_PAD_SD3_DAT4__USDHC3_DAT4			1265
+MX6Q_PAD_SD3_DAT4__UART2_RXD			1266
+MX6Q_PAD_SD3_DAT4__PCIE_CTRL_MUX_27		1267
+MX6Q_PAD_SD3_DAT4__USBOH3_UH3_DFD_OUT_3		1268
+MX6Q_PAD_SD3_DAT4__USBOH3_UH2_DFD_OUT_3		1269
+MX6Q_PAD_SD3_DAT4__GPIO_7_1			1270
+MX6Q_PAD_SD3_DAT4__MIPI_CORE_DPHY_IN_15		1271
+MX6Q_PAD_SD3_DAT4__ANATOP_TESTO_12		1272
+MX6Q_PAD_SD3_CMD__USDHC3_CMD			1273
+MX6Q_PAD_SD3_CMD__UART2_CTS			1274
+MX6Q_PAD_SD3_CMD__CAN1_TXCAN			1275
+MX6Q_PAD_SD3_CMD__USBOH3_UH3_DFD_OUT_4		1276
+MX6Q_PAD_SD3_CMD__USBOH3_UH2_DFD_OUT_4		1277
+MX6Q_PAD_SD3_CMD__GPIO_7_2			1278
+MX6Q_PAD_SD3_CMD__MIPI_CORE_DPHY_IN_16		1279
+MX6Q_PAD_SD3_CMD__ANATOP_TESTO_13		1280
+MX6Q_PAD_SD3_CLK__USDHC3_CLK			1281
+MX6Q_PAD_SD3_CLK__UART2_RTS			1282
+MX6Q_PAD_SD3_CLK__CAN1_RXCAN			1283
+MX6Q_PAD_SD3_CLK__USBOH3_UH3_DFD_OUT_5		1284
+MX6Q_PAD_SD3_CLK__USBOH3_UH2_DFD_OUT_5		1285
+MX6Q_PAD_SD3_CLK__GPIO_7_3			1286
+MX6Q_PAD_SD3_CLK__MIPI_CORE_DPHY_IN_17		1287
+MX6Q_PAD_SD3_CLK__ANATOP_TESTO_14		1288
+MX6Q_PAD_SD3_DAT0__USDHC3_DAT0			1289
+MX6Q_PAD_SD3_DAT0__UART1_CTS			1290
+MX6Q_PAD_SD3_DAT0__CAN2_TXCAN			1291
+MX6Q_PAD_SD3_DAT0__USBOH3_UH3_DFD_OUT_6		1292
+MX6Q_PAD_SD3_DAT0__USBOH3_UH2_DFD_OUT_6		1293
+MX6Q_PAD_SD3_DAT0__GPIO_7_4			1294
+MX6Q_PAD_SD3_DAT0__MIPI_CORE_DPHY_IN_18		1295
+MX6Q_PAD_SD3_DAT0__ANATOP_TESTO_15		1296
+MX6Q_PAD_SD3_DAT1__USDHC3_DAT1			1297
+MX6Q_PAD_SD3_DAT1__UART1_RTS			1298
+MX6Q_PAD_SD3_DAT1__CAN2_RXCAN			1299
+MX6Q_PAD_SD3_DAT1__USBOH3_UH3_DFD_OUT_7		1300
+MX6Q_PAD_SD3_DAT1__USBOH3_UH2_DFD_OUT_7		1301
+MX6Q_PAD_SD3_DAT1__GPIO_7_5			1302
+MX6Q_PAD_SD3_DAT1__MIPI_CORE_DPHY_IN_19		1303
+MX6Q_PAD_SD3_DAT1__ANATOP_TESTI_0		1304
+MX6Q_PAD_SD3_DAT2__USDHC3_DAT2			1305
+MX6Q_PAD_SD3_DAT2__PCIE_CTRL_MUX_28		1306
+MX6Q_PAD_SD3_DAT2__USBOH3_UH3_DFD_OUT_8		1307
+MX6Q_PAD_SD3_DAT2__USBOH3_UH2_DFD_OUT_8		1308
+MX6Q_PAD_SD3_DAT2__GPIO_7_6			1309
+MX6Q_PAD_SD3_DAT2__MIPI_CORE_DPHY_IN_20		1310
+MX6Q_PAD_SD3_DAT2__ANATOP_TESTI_1		1311
+MX6Q_PAD_SD3_DAT3__USDHC3_DAT3			1312
+MX6Q_PAD_SD3_DAT3__UART3_CTS			1313
+MX6Q_PAD_SD3_DAT3__PCIE_CTRL_MUX_29		1314
+MX6Q_PAD_SD3_DAT3__USBOH3_UH3_DFD_OUT_9		1315
+MX6Q_PAD_SD3_DAT3__USBOH3_UH2_DFD_OUT_9		1316
+MX6Q_PAD_SD3_DAT3__GPIO_7_7			1317
+MX6Q_PAD_SD3_DAT3__MIPI_CORE_DPHY_IN_21		1318
+MX6Q_PAD_SD3_DAT3__ANATOP_TESTI_2		1319
+MX6Q_PAD_SD3_RST__USDHC3_RST			1320
+MX6Q_PAD_SD3_RST__UART3_RTS			1321
+MX6Q_PAD_SD3_RST__PCIE_CTRL_MUX_30		1322
+MX6Q_PAD_SD3_RST__USBOH3_UH3_DFD_OUT_10		1323
+MX6Q_PAD_SD3_RST__USBOH3_UH2_DFD_OUT_10		1324
+MX6Q_PAD_SD3_RST__GPIO_7_8			1325
+MX6Q_PAD_SD3_RST__MIPI_CORE_DPHY_IN_22		1326
+MX6Q_PAD_SD3_RST__ANATOP_ANATOP_TESTI_3		1327
+MX6Q_PAD_NANDF_CLE__RAWNAND_CLE			1328
+MX6Q_PAD_NANDF_CLE__IPU2_SISG_4			1329
+MX6Q_PAD_NANDF_CLE__PCIE_CTRL_MUX_31		1330
+MX6Q_PAD_NANDF_CLE__USBOH3_UH3_DFD_OT11		1331
+MX6Q_PAD_NANDF_CLE__USBOH3_UH2_DFD_OT11		1332
+MX6Q_PAD_NANDF_CLE__GPIO_6_7			1333
+MX6Q_PAD_NANDF_CLE__MIPI_CORE_DPHY_IN23		1334
+MX6Q_PAD_NANDF_CLE__TPSMP_HTRANS_0		1335
+MX6Q_PAD_NANDF_ALE__RAWNAND_ALE			1336
+MX6Q_PAD_NANDF_ALE__USDHC4_RST			1337
+MX6Q_PAD_NANDF_ALE__PCIE_CTRL_MUX_0		1338
+MX6Q_PAD_NANDF_ALE__USBOH3_UH3_DFD_OT12		1339
+MX6Q_PAD_NANDF_ALE__USBOH3_UH2_DFD_OT12		1340
+MX6Q_PAD_NANDF_ALE__GPIO_6_8			1341
+MX6Q_PAD_NANDF_ALE__MIPI_CR_DPHY_IN_24		1342
+MX6Q_PAD_NANDF_ALE__TPSMP_HTRANS_1		1343
+MX6Q_PAD_NANDF_WP_B__RAWNAND_RESETN		1344
+MX6Q_PAD_NANDF_WP_B__IPU2_SISG_5		1345
+MX6Q_PAD_NANDF_WP_B__PCIE_CTRL__MUX_1		1346
+MX6Q_PAD_NANDF_WP_B__USBOH3_UH3_DFDOT13		1347
+MX6Q_PAD_NANDF_WP_B__USBOH3_UH2_DFDOT13		1348
+MX6Q_PAD_NANDF_WP_B__GPIO_6_9			1349
+MX6Q_PAD_NANDF_WP_B__MIPI_CR_DPHY_OUT32		1350
+MX6Q_PAD_NANDF_WP_B__PL301_PER1_HSIZE_0		1351
+MX6Q_PAD_NANDF_RB0__RAWNAND_READY0		1352
+MX6Q_PAD_NANDF_RB0__IPU2_DI0_PIN1		1353
+MX6Q_PAD_NANDF_RB0__PCIE_CTRL_MUX_2		1354
+MX6Q_PAD_NANDF_RB0__USBOH3_UH3_DFD_OT14		1355
+MX6Q_PAD_NANDF_RB0__USBOH3_UH2_DFD_OT14		1356
+MX6Q_PAD_NANDF_RB0__GPIO_6_10			1357
+MX6Q_PAD_NANDF_RB0__MIPI_CR_DPHY_OUT_33		1358
+MX6Q_PAD_NANDF_RB0__PL301_PER1_HSIZE_1		1359
+MX6Q_PAD_NANDF_CS0__RAWNAND_CE0N		1360
+MX6Q_PAD_NANDF_CS0__USBOH3_UH3_DFD_OT15		1361
+MX6Q_PAD_NANDF_CS0__USBOH3_UH2_DFD_OT15		1362
+MX6Q_PAD_NANDF_CS0__GPIO_6_11			1363
+MX6Q_PAD_NANDF_CS0__PL301_PER1_HSIZE_2		1364
+MX6Q_PAD_NANDF_CS1__RAWNAND_CE1N		1365
+MX6Q_PAD_NANDF_CS1__USDHC4_VSELECT		1366
+MX6Q_PAD_NANDF_CS1__USDHC3_VSELECT		1367
+MX6Q_PAD_NANDF_CS1__PCIE_CTRL_MUX_3		1368
+MX6Q_PAD_NANDF_CS1__GPIO_6_14			1369
+MX6Q_PAD_NANDF_CS1__PL301_PER1_HRDYOUT		1370
+MX6Q_PAD_NANDF_CS2__RAWNAND_CE2N		1371
+MX6Q_PAD_NANDF_CS2__IPU1_SISG_0			1372
+MX6Q_PAD_NANDF_CS2__ESAI1_TX0			1373
+MX6Q_PAD_NANDF_CS2__WEIM_WEIM_CRE		1374
+MX6Q_PAD_NANDF_CS2__CCM_CLKO2			1375
+MX6Q_PAD_NANDF_CS2__GPIO_6_15			1376
+MX6Q_PAD_NANDF_CS2__IPU2_SISG_0			1377
+MX6Q_PAD_NANDF_CS3__RAWNAND_CE3N		1378
+MX6Q_PAD_NANDF_CS3__IPU1_SISG_1			1379
+MX6Q_PAD_NANDF_CS3__ESAI1_TX1			1380
+MX6Q_PAD_NANDF_CS3__WEIM_WEIM_A_26		1381
+MX6Q_PAD_NANDF_CS3__PCIE_CTRL_MUX_4		1382
+MX6Q_PAD_NANDF_CS3__GPIO_6_16			1383
+MX6Q_PAD_NANDF_CS3__IPU2_SISG_1			1384
+MX6Q_PAD_NANDF_CS3__TPSMP_CLK			1385
+MX6Q_PAD_SD4_CMD__USDHC4_CMD			1386
+MX6Q_PAD_SD4_CMD__RAWNAND_RDN			1387
+MX6Q_PAD_SD4_CMD__UART3_TXD			1388
+MX6Q_PAD_SD4_CMD__PCIE_CTRL_MUX_5		1389
+MX6Q_PAD_SD4_CMD__GPIO_7_9			1390
+MX6Q_PAD_SD4_CMD__TPSMP_HDATA_DIR		1391
+MX6Q_PAD_SD4_CLK__USDHC4_CLK			1392
+MX6Q_PAD_SD4_CLK__RAWNAND_WRN			1393
+MX6Q_PAD_SD4_CLK__UART3_RXD			1394
+MX6Q_PAD_SD4_CLK__PCIE_CTRL_MUX_6		1395
+MX6Q_PAD_SD4_CLK__GPIO_7_10			1396
+MX6Q_PAD_NANDF_D0__RAWNAND_D0			1397
+MX6Q_PAD_NANDF_D0__USDHC1_DAT4			1398
+MX6Q_PAD_NANDF_D0__GPU3D_GPU_DBG_OUT_0		1399
+MX6Q_PAD_NANDF_D0__USBOH3_UH2_DFD_OUT16		1400
+MX6Q_PAD_NANDF_D0__USBOH3_UH3_DFD_OUT16		1401
+MX6Q_PAD_NANDF_D0__GPIO_2_0			1402
+MX6Q_PAD_NANDF_D0__IPU1_IPU_DIAG_BUS_0		1403
+MX6Q_PAD_NANDF_D0__IPU2_IPU_DIAG_BUS_0		1404
+MX6Q_PAD_NANDF_D1__RAWNAND_D1			1405
+MX6Q_PAD_NANDF_D1__USDHC1_DAT5			1406
+MX6Q_PAD_NANDF_D1__GPU3D_GPU_DEBUG_OUT1		1407
+MX6Q_PAD_NANDF_D1__USBOH3_UH2_DFD_OUT17		1408
+MX6Q_PAD_NANDF_D1__USBOH3_UH3_DFD_OUT17		1409
+MX6Q_PAD_NANDF_D1__GPIO_2_1			1410
+MX6Q_PAD_NANDF_D1__IPU1_IPU_DIAG_BUS_1		1411
+MX6Q_PAD_NANDF_D1__IPU2_IPU_DIAG_BUS_1		1412
+MX6Q_PAD_NANDF_D2__RAWNAND_D2			1413
+MX6Q_PAD_NANDF_D2__USDHC1_DAT6			1414
+MX6Q_PAD_NANDF_D2__GPU3D_GPU_DBG_OUT_2		1415
+MX6Q_PAD_NANDF_D2__USBOH3_UH2_DFD_OUT18		1416
+MX6Q_PAD_NANDF_D2__USBOH3_UH3_DFD_OUT18		1417
+MX6Q_PAD_NANDF_D2__GPIO_2_2			1418
+MX6Q_PAD_NANDF_D2__IPU1_IPU_DIAG_BUS_2		1419
+MX6Q_PAD_NANDF_D2__IPU2_IPU_DIAG_BUS_2		1420
+MX6Q_PAD_NANDF_D3__RAWNAND_D3			1421
+MX6Q_PAD_NANDF_D3__USDHC1_DAT7			1422
+MX6Q_PAD_NANDF_D3__GPU3D_GPU_DBG_OUT_3		1423
+MX6Q_PAD_NANDF_D3__USBOH3_UH2_DFD_OUT19		1424
+MX6Q_PAD_NANDF_D3__USBOH3_UH3_DFD_OUT19		1425
+MX6Q_PAD_NANDF_D3__GPIO_2_3			1426
+MX6Q_PAD_NANDF_D3__IPU1_IPU_DIAG_BUS_3		1427
+MX6Q_PAD_NANDF_D3__IPU2_IPU_DIAG_BUS_3		1428
+MX6Q_PAD_NANDF_D4__RAWNAND_D4			1429
+MX6Q_PAD_NANDF_D4__USDHC2_DAT4			1430
+MX6Q_PAD_NANDF_D4__GPU3D_GPU_DBG_OUT_4		1431
+MX6Q_PAD_NANDF_D4__USBOH3_UH2_DFD_OUT20		1432
+MX6Q_PAD_NANDF_D4__USBOH3_UH3_DFD_OUT20		1433
+MX6Q_PAD_NANDF_D4__GPIO_2_4			1434
+MX6Q_PAD_NANDF_D4__IPU1_IPU_DIAG_BUS_4		1435
+MX6Q_PAD_NANDF_D4__IPU2_IPU_DIAG_BUS_4		1436
+MX6Q_PAD_NANDF_D5__RAWNAND_D5			1437
+MX6Q_PAD_NANDF_D5__USDHC2_DAT5			1438
+MX6Q_PAD_NANDF_D5__GPU3D_GPU_DBG_OUT_5		1439
+MX6Q_PAD_NANDF_D5__USBOH3_UH2_DFD_OUT21		1440
+MX6Q_PAD_NANDF_D5__USBOH3_UH3_DFD_OUT21		1441
+MX6Q_PAD_NANDF_D5__GPIO_2_5			1442
+MX6Q_PAD_NANDF_D5__IPU1_IPU_DIAG_BUS_5		1443
+MX6Q_PAD_NANDF_D5__IPU2_IPU_DIAG_BUS_5		1444
+MX6Q_PAD_NANDF_D6__RAWNAND_D6			1445
+MX6Q_PAD_NANDF_D6__USDHC2_DAT6			1446
+MX6Q_PAD_NANDF_D6__GPU3D_GPU_DBG_OUT_6		1447
+MX6Q_PAD_NANDF_D6__USBOH3_UH2_DFD_OUT22		1448
+MX6Q_PAD_NANDF_D6__USBOH3_UH3_DFD_OUT22		1449
+MX6Q_PAD_NANDF_D6__GPIO_2_6			1450
+MX6Q_PAD_NANDF_D6__IPU1_IPU_DIAG_BUS_6		1451
+MX6Q_PAD_NANDF_D6__IPU2_IPU_DIAG_BUS_6		1452
+MX6Q_PAD_NANDF_D7__RAWNAND_D7			1453
+MX6Q_PAD_NANDF_D7__USDHC2_DAT7			1454
+MX6Q_PAD_NANDF_D7__GPU3D_GPU_DBG_OUT_7		1455
+MX6Q_PAD_NANDF_D7__USBOH3_UH2_DFD_OUT23		1456
+MX6Q_PAD_NANDF_D7__USBOH3_UH3_DFD_OUT23		1457
+MX6Q_PAD_NANDF_D7__GPIO_2_7			1458
+MX6Q_PAD_NANDF_D7__IPU1_IPU_DIAG_BUS_7		1459
+MX6Q_PAD_NANDF_D7__IPU2_IPU_DIAG_BUS_7		1460
+MX6Q_PAD_SD4_DAT0__RAWNAND_D8			1461
+MX6Q_PAD_SD4_DAT0__USDHC4_DAT0			1462
+MX6Q_PAD_SD4_DAT0__RAWNAND_DQS			1463
+MX6Q_PAD_SD4_DAT0__USBOH3_UH2_DFD_OUT24		1464
+MX6Q_PAD_SD4_DAT0__USBOH3_UH3_DFD_OUT24		1465
+MX6Q_PAD_SD4_DAT0__GPIO_2_8			1466
+MX6Q_PAD_SD4_DAT0__IPU1_IPU_DIAG_BUS_8		1467
+MX6Q_PAD_SD4_DAT0__IPU2_IPU_DIAG_BUS_8		1468
+MX6Q_PAD_SD4_DAT1__RAWNAND_D9			1469
+MX6Q_PAD_SD4_DAT1__USDHC4_DAT1			1470
+MX6Q_PAD_SD4_DAT1__PWM3_PWMO			1471
+MX6Q_PAD_SD4_DAT1__USBOH3_UH2_DFD_OUT25		1472
+MX6Q_PAD_SD4_DAT1__USBOH3_UH3_DFD_OUT25		1473
+MX6Q_PAD_SD4_DAT1__GPIO_2_9			1474
+MX6Q_PAD_SD4_DAT1__IPU1_IPU_DIAG_BUS_9		1475
+MX6Q_PAD_SD4_DAT1__IPU2_IPU_DIAG_BUS_9		1476
+MX6Q_PAD_SD4_DAT2__RAWNAND_D10			1477
+MX6Q_PAD_SD4_DAT2__USDHC4_DAT2			1478
+MX6Q_PAD_SD4_DAT2__PWM4_PWMO			1479
+MX6Q_PAD_SD4_DAT2__USBOH3_UH2_DFD_OUT26		1480
+MX6Q_PAD_SD4_DAT2__USBOH3_UH3_DFD_OUT26		1481
+MX6Q_PAD_SD4_DAT2__GPIO_2_10			1482
+MX6Q_PAD_SD4_DAT2__IPU1_IPU_DIAG_BUS_10		1483
+MX6Q_PAD_SD4_DAT2__IPU2_IPU_DIAG_BUS_10		1484
+MX6Q_PAD_SD4_DAT3__RAWNAND_D11			1485
+MX6Q_PAD_SD4_DAT3__USDHC4_DAT3			1486
+MX6Q_PAD_SD4_DAT3__USBOH3_UH2_DFD_OUT27		1487
+MX6Q_PAD_SD4_DAT3__USBOH3_UH3_DFD_OUT27		1488
+MX6Q_PAD_SD4_DAT3__GPIO_2_11			1489
+MX6Q_PAD_SD4_DAT3__IPU1_IPU_DIAG_BUS_11		1490
+MX6Q_PAD_SD4_DAT3__IPU2_IPU_DIAG_BUS_11		1491
+MX6Q_PAD_SD4_DAT4__RAWNAND_D12			1492
+MX6Q_PAD_SD4_DAT4__USDHC4_DAT4			1493
+MX6Q_PAD_SD4_DAT4__UART2_RXD			1494
+MX6Q_PAD_SD4_DAT4__USBOH3_UH2_DFD_OUT28		1495
+MX6Q_PAD_SD4_DAT4__USBOH3_UH3_DFD_OUT28		1496
+MX6Q_PAD_SD4_DAT4__GPIO_2_12			1497
+MX6Q_PAD_SD4_DAT4__IPU1_IPU_DIAG_BUS_12		1498
+MX6Q_PAD_SD4_DAT4__IPU2_IPU_DIAG_BUS_12		1499
+MX6Q_PAD_SD4_DAT5__RAWNAND_D13			1500
+MX6Q_PAD_SD4_DAT5__USDHC4_DAT5			1501
+MX6Q_PAD_SD4_DAT5__UART2_RTS			1502
+MX6Q_PAD_SD4_DAT5__USBOH3_UH2_DFD_OUT29		1503
+MX6Q_PAD_SD4_DAT5__USBOH3_UH3_DFD_OUT29		1504
+MX6Q_PAD_SD4_DAT5__GPIO_2_13			1505
+MX6Q_PAD_SD4_DAT5__IPU1_IPU_DIAG_BUS_13		1506
+MX6Q_PAD_SD4_DAT5__IPU2_IPU_DIAG_BUS_13		1507
+MX6Q_PAD_SD4_DAT6__RAWNAND_D14			1508
+MX6Q_PAD_SD4_DAT6__USDHC4_DAT6			1509
+MX6Q_PAD_SD4_DAT6__UART2_CTS			1510
+MX6Q_PAD_SD4_DAT6__USBOH3_UH2_DFD_OUT30		1511
+MX6Q_PAD_SD4_DAT6__USBOH3_UH3_DFD_OUT30		1512
+MX6Q_PAD_SD4_DAT6__GPIO_2_14			1513
+MX6Q_PAD_SD4_DAT6__IPU1_IPU_DIAG_BUS_14		1514
+MX6Q_PAD_SD4_DAT6__IPU2_IPU_DIAG_BUS_14		1515
+MX6Q_PAD_SD4_DAT7__RAWNAND_D15			1516
+MX6Q_PAD_SD4_DAT7__USDHC4_DAT7			1517
+MX6Q_PAD_SD4_DAT7__UART2_TXD			1518
+MX6Q_PAD_SD4_DAT7__USBOH3_UH2_DFD_OUT31		1519
+MX6Q_PAD_SD4_DAT7__USBOH3_UH3_DFD_OUT31		1520
+MX6Q_PAD_SD4_DAT7__GPIO_2_15			1521
+MX6Q_PAD_SD4_DAT7__IPU1_IPU_DIAG_BUS_15		1522
+MX6Q_PAD_SD4_DAT7__IPU2_IPU_DIAG_BUS_15		1523
+MX6Q_PAD_SD1_DAT1__USDHC1_DAT1			1524
+MX6Q_PAD_SD1_DAT1__ECSPI5_SS0			1525
+MX6Q_PAD_SD1_DAT1__PWM3_PWMO			1526
+MX6Q_PAD_SD1_DAT1__GPT_CAPIN2			1527
+MX6Q_PAD_SD1_DAT1__PCIE_CTRL_MUX_7		1528
+MX6Q_PAD_SD1_DAT1__GPIO_1_17			1529
+MX6Q_PAD_SD1_DAT1__HDMI_TX_OPHYDTB_0		1530
+MX6Q_PAD_SD1_DAT1__ANATOP_TESTO_8		1531
+MX6Q_PAD_SD1_DAT0__USDHC1_DAT0			1532
+MX6Q_PAD_SD1_DAT0__ECSPI5_MISO			1533
+MX6Q_PAD_SD1_DAT0__CAAM_WRAP_RNG_OSCOBS		1534
+MX6Q_PAD_SD1_DAT0__GPT_CAPIN1			1535
+MX6Q_PAD_SD1_DAT0__PCIE_CTRL_MUX_8		1536
+MX6Q_PAD_SD1_DAT0__GPIO_1_16			1537
+MX6Q_PAD_SD1_DAT0__HDMI_TX_OPHYDTB_1		1538
+MX6Q_PAD_SD1_DAT0__ANATOP_TESTO_7		1539
+MX6Q_PAD_SD1_DAT3__USDHC1_DAT3			1540
+MX6Q_PAD_SD1_DAT3__ECSPI5_SS2			1541
+MX6Q_PAD_SD1_DAT3__GPT_CMPOUT3			1542
+MX6Q_PAD_SD1_DAT3__PWM1_PWMO			1543
+MX6Q_PAD_SD1_DAT3__WDOG2_WDOG_B			1544
+MX6Q_PAD_SD1_DAT3__GPIO_1_21			1545
+MX6Q_PAD_SD1_DAT3__WDOG2_WDOG_RST_B_DEB		1546
+MX6Q_PAD_SD1_DAT3__ANATOP_TESTO_6		1547
+MX6Q_PAD_SD1_CMD__USDHC1_CMD			1548
+MX6Q_PAD_SD1_CMD__ECSPI5_MOSI			1549
+MX6Q_PAD_SD1_CMD__PWM4_PWMO			1550
+MX6Q_PAD_SD1_CMD__GPT_CMPOUT1			1551
+MX6Q_PAD_SD1_CMD__GPIO_1_18			1552
+MX6Q_PAD_SD1_CMD__ANATOP_TESTO_5		1553
+MX6Q_PAD_SD1_DAT2__USDHC1_DAT2			1554
+MX6Q_PAD_SD1_DAT2__ECSPI5_SS1			1555
+MX6Q_PAD_SD1_DAT2__GPT_CMPOUT2			1556
+MX6Q_PAD_SD1_DAT2__PWM2_PWMO			1557
+MX6Q_PAD_SD1_DAT2__WDOG1_WDOG_B			1558
+MX6Q_PAD_SD1_DAT2__GPIO_1_19			1559
+MX6Q_PAD_SD1_DAT2__WDOG1_WDOG_RST_B_DEB		1560
+MX6Q_PAD_SD1_DAT2__ANATOP_TESTO_4		1561
+MX6Q_PAD_SD1_CLK__USDHC1_CLK			1562
+MX6Q_PAD_SD1_CLK__ECSPI5_SCLK			1563
+MX6Q_PAD_SD1_CLK__OSC32K_32K_OUT		1564
+MX6Q_PAD_SD1_CLK__GPT_CLKIN			1565
+MX6Q_PAD_SD1_CLK__GPIO_1_20			1566
+MX6Q_PAD_SD1_CLK__PHY_DTB_0			1567
+MX6Q_PAD_SD1_CLK__SATA_PHY_DTB_0		1568
+MX6Q_PAD_SD2_CLK__USDHC2_CLK			1569
+MX6Q_PAD_SD2_CLK__ECSPI5_SCLK			1570
+MX6Q_PAD_SD2_CLK__KPP_COL_5			1571
+MX6Q_PAD_SD2_CLK__AUDMUX_AUD4_RXFS		1572
+MX6Q_PAD_SD2_CLK__PCIE_CTRL_MUX_9		1573
+MX6Q_PAD_SD2_CLK__GPIO_1_10			1574
+MX6Q_PAD_SD2_CLK__PHY_DTB_1			1575
+MX6Q_PAD_SD2_CLK__SATA_PHY_DTB_1		1576
+MX6Q_PAD_SD2_CMD__USDHC2_CMD			1577
+MX6Q_PAD_SD2_CMD__ECSPI5_MOSI			1578
+MX6Q_PAD_SD2_CMD__KPP_ROW_5			1579
+MX6Q_PAD_SD2_CMD__AUDMUX_AUD4_RXC		1580
+MX6Q_PAD_SD2_CMD__PCIE_CTRL_MUX_10		1581
+MX6Q_PAD_SD2_CMD__GPIO_1_11			1582
+MX6Q_PAD_SD2_DAT3__USDHC2_DAT3			1583
+MX6Q_PAD_SD2_DAT3__ECSPI5_SS3			1584
+MX6Q_PAD_SD2_DAT3__KPP_COL_6			1585
+MX6Q_PAD_SD2_DAT3__AUDMUX_AUD4_TXC		1586
+MX6Q_PAD_SD2_DAT3__PCIE_CTRL_MUX_11		1587
+MX6Q_PAD_SD2_DAT3__GPIO_1_12			1588
+MX6Q_PAD_SD2_DAT3__SJC_DONE			1589
+MX6Q_PAD_SD2_DAT3__ANATOP_TESTO_3		1590

Documentation/devicetree/bindings/pinctrl/fsl,mxs-pinctrl.txt

@@ -0,0 +1,918 @@
+* Freescale MXS Pin Controller
+
+The pins controlled by mxs pin controller are organized in banks, each bank
+has 32 pins.  Each pin has 4 multiplexing functions, and generally, the 4th
+function is GPIO.  The configuration on the pins includes drive strength,
+voltage and pull-up.
+
+Required properties:
+- compatible: "fsl,imx23-pinctrl" or "fsl,imx28-pinctrl"
+- reg: Should contain the register physical address and length for the
+  pin controller.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices.
+
+The node of mxs pin controller acts as a container for an arbitrary number of
+subnodes.  Each of these subnodes represents some desired configuration for
+a group of pins, and only affects those parameters that are explicitly listed.
+In other words, a subnode that describes a drive strength parameter implies no
+information about pull-up. For this reason, even seemingly boolean values are
+actually tristates in this binding: unspecified, off, or on. Unspecified is
+represented as an absent property, and off/on are represented as integer
+values 0 and 1.
+
+Those subnodes under mxs pin controller node will fall into two categories.
+One is to set up a group of pins for a function, both mux selection and pin
+configurations, and it's called group node in the binding document.   The other
+one is to adjust the pin configuration for some particular pins that need a
+different configuration than what is defined in group node.  The binding
+document calls this type of node config node.
+
+On mxs, there is no hardware pin group. The pin group in this binding only
+means a group of pins put together for particular peripheral to work in
+particular function, like SSP0 functioning as mmc0-8bit.  That said, the
+group node should include all the pins needed for one function rather than
+having these pins defined in several group nodes.  It also means each of
+"pinctrl-*" phandle in client device node should only have one group node
+pointed in there, while the phandle can have multiple config node referenced
+there to adjust configurations for some pins in the group.
+
+Required subnode-properties:
+- fsl,pinmux-ids: An integer array.  Each integer in the array specify a pin
+  with given mux function, with bank, pin and mux packed as below.
+
+    [15..12] : bank number
+    [11..4]  : pin number
+    [3..0]   : mux selection
+
+  This integer with mux selection packed is used as an entity by both group
+  and config nodes to identify a pin.  The mux selection in the integer takes
+  effects only on group node, and will get ignored by driver with config node,
+  since config node is only meant to set up pin configurations.
+
+  Valid values for these integers are listed below.
+
+- reg: Should be the index of the group nodes for same function.  This property
+  is required only for group nodes, and should not be present in any config
+  nodes.
+
+Optional subnode-properties:
+- fsl,drive-strength: Integer.
+    0: 4 mA
+    1: 8 mA
+    2: 12 mA
+    3: 16 mA
+- fsl,voltage: Integer.
+    0: 1.8 V
+    1: 3.3 V
+- fsl,pull-up: Integer.
+    0: Disable the internal pull-up
+    1: Enable the internal pull-up
+
+Examples:
+
+pinctrl@80018000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,imx28-pinctrl";
+	reg = <0x80018000 2000>;
+
+	mmc0_8bit_pins_a: mmc0-8bit@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			0x2000 0x2010 0x2020 0x2030
+			0x2040 0x2050 0x2060 0x2070
+			0x2080 0x2090 0x20a0>;
+		fsl,drive-strength = <1>;
+		fsl,voltage = <1>;
+		fsl,pull-up = <1>;
+	};
+
+	mmc_cd_cfg: mmc-cd-cfg {
+		fsl,pinmux-ids = <0x2090>;
+		fsl,pull-up = <0>;
+	};
+
+	mmc_sck_cfg: mmc-sck-cfg {
+		fsl,pinmux-ids = <0x20a0>;
+		fsl,drive-strength = <2>;
+		fsl,pull-up = <0>;
+	};
+};
+
+In this example, group node mmc0-8bit defines a group of pins for mxs SSP0
+to function as a 8-bit mmc device, with 8mA, 3.3V and pull-up configurations
+applied on all these pins.  And config nodes mmc-cd-cfg and mmc-sck-cfg are
+adjusting the configuration for pins card-detection and clock from what group
+node mmc0-8bit defines.  Only the configuration properties to be adjusted need
+to be listed in the config nodes.
+
+Valid values for i.MX28 pinmux-id:
+
+pinmux						id
+------						--
+MX28_PAD_GPMI_D00__GPMI_D0			0x0000
+MX28_PAD_GPMI_D01__GPMI_D1			0x0010
+MX28_PAD_GPMI_D02__GPMI_D2			0x0020
+MX28_PAD_GPMI_D03__GPMI_D3			0x0030
+MX28_PAD_GPMI_D04__GPMI_D4			0x0040
+MX28_PAD_GPMI_D05__GPMI_D5			0x0050
+MX28_PAD_GPMI_D06__GPMI_D6			0x0060
+MX28_PAD_GPMI_D07__GPMI_D7			0x0070
+MX28_PAD_GPMI_CE0N__GPMI_CE0N			0x0100
+MX28_PAD_GPMI_CE1N__GPMI_CE1N			0x0110
+MX28_PAD_GPMI_CE2N__GPMI_CE2N			0x0120
+MX28_PAD_GPMI_CE3N__GPMI_CE3N			0x0130
+MX28_PAD_GPMI_RDY0__GPMI_READY0			0x0140
+MX28_PAD_GPMI_RDY1__GPMI_READY1			0x0150
+MX28_PAD_GPMI_RDY2__GPMI_READY2			0x0160
+MX28_PAD_GPMI_RDY3__GPMI_READY3			0x0170
+MX28_PAD_GPMI_RDN__GPMI_RDN			0x0180
+MX28_PAD_GPMI_WRN__GPMI_WRN			0x0190
+MX28_PAD_GPMI_ALE__GPMI_ALE			0x01a0
+MX28_PAD_GPMI_CLE__GPMI_CLE			0x01b0
+MX28_PAD_GPMI_RESETN__GPMI_RESETN		0x01c0
+MX28_PAD_LCD_D00__LCD_D0			0x1000
+MX28_PAD_LCD_D01__LCD_D1			0x1010
+MX28_PAD_LCD_D02__LCD_D2			0x1020
+MX28_PAD_LCD_D03__LCD_D3			0x1030
+MX28_PAD_LCD_D04__LCD_D4			0x1040
+MX28_PAD_LCD_D05__LCD_D5			0x1050
+MX28_PAD_LCD_D06__LCD_D6			0x1060
+MX28_PAD_LCD_D07__LCD_D7			0x1070
+MX28_PAD_LCD_D08__LCD_D8			0x1080
+MX28_PAD_LCD_D09__LCD_D9			0x1090
+MX28_PAD_LCD_D10__LCD_D10			0x10a0
+MX28_PAD_LCD_D11__LCD_D11			0x10b0
+MX28_PAD_LCD_D12__LCD_D12			0x10c0
+MX28_PAD_LCD_D13__LCD_D13			0x10d0
+MX28_PAD_LCD_D14__LCD_D14			0x10e0
+MX28_PAD_LCD_D15__LCD_D15			0x10f0
+MX28_PAD_LCD_D16__LCD_D16			0x1100
+MX28_PAD_LCD_D17__LCD_D17			0x1110
+MX28_PAD_LCD_D18__LCD_D18			0x1120
+MX28_PAD_LCD_D19__LCD_D19			0x1130
+MX28_PAD_LCD_D20__LCD_D20			0x1140
+MX28_PAD_LCD_D21__LCD_D21			0x1150
+MX28_PAD_LCD_D22__LCD_D22			0x1160
+MX28_PAD_LCD_D23__LCD_D23			0x1170
+MX28_PAD_LCD_RD_E__LCD_RD_E			0x1180
+MX28_PAD_LCD_WR_RWN__LCD_WR_RWN			0x1190
+MX28_PAD_LCD_RS__LCD_RS				0x11a0
+MX28_PAD_LCD_CS__LCD_CS				0x11b0
+MX28_PAD_LCD_VSYNC__LCD_VSYNC			0x11c0
+MX28_PAD_LCD_HSYNC__LCD_HSYNC			0x11d0
+MX28_PAD_LCD_DOTCLK__LCD_DOTCLK			0x11e0
+MX28_PAD_LCD_ENABLE__LCD_ENABLE			0x11f0
+MX28_PAD_SSP0_DATA0__SSP0_D0			0x2000
+MX28_PAD_SSP0_DATA1__SSP0_D1			0x2010
+MX28_PAD_SSP0_DATA2__SSP0_D2			0x2020
+MX28_PAD_SSP0_DATA3__SSP0_D3			0x2030
+MX28_PAD_SSP0_DATA4__SSP0_D4			0x2040
+MX28_PAD_SSP0_DATA5__SSP0_D5			0x2050
+MX28_PAD_SSP0_DATA6__SSP0_D6			0x2060
+MX28_PAD_SSP0_DATA7__SSP0_D7			0x2070
+MX28_PAD_SSP0_CMD__SSP0_CMD			0x2080
+MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT		0x2090
+MX28_PAD_SSP0_SCK__SSP0_SCK			0x20a0
+MX28_PAD_SSP1_SCK__SSP1_SCK			0x20c0
+MX28_PAD_SSP1_CMD__SSP1_CMD			0x20d0
+MX28_PAD_SSP1_DATA0__SSP1_D0			0x20e0
+MX28_PAD_SSP1_DATA3__SSP1_D3			0x20f0
+MX28_PAD_SSP2_SCK__SSP2_SCK			0x2100
+MX28_PAD_SSP2_MOSI__SSP2_CMD			0x2110
+MX28_PAD_SSP2_MISO__SSP2_D0			0x2120
+MX28_PAD_SSP2_SS0__SSP2_D3			0x2130
+MX28_PAD_SSP2_SS1__SSP2_D4			0x2140
+MX28_PAD_SSP2_SS2__SSP2_D5			0x2150
+MX28_PAD_SSP3_SCK__SSP3_SCK			0x2180
+MX28_PAD_SSP3_MOSI__SSP3_CMD			0x2190
+MX28_PAD_SSP3_MISO__SSP3_D0			0x21a0
+MX28_PAD_SSP3_SS0__SSP3_D3			0x21b0
+MX28_PAD_AUART0_RX__AUART0_RX			0x3000
+MX28_PAD_AUART0_TX__AUART0_TX			0x3010
+MX28_PAD_AUART0_CTS__AUART0_CTS			0x3020
+MX28_PAD_AUART0_RTS__AUART0_RTS			0x3030
+MX28_PAD_AUART1_RX__AUART1_RX			0x3040
+MX28_PAD_AUART1_TX__AUART1_TX			0x3050
+MX28_PAD_AUART1_CTS__AUART1_CTS			0x3060
+MX28_PAD_AUART1_RTS__AUART1_RTS			0x3070
+MX28_PAD_AUART2_RX__AUART2_RX			0x3080
+MX28_PAD_AUART2_TX__AUART2_TX			0x3090
+MX28_PAD_AUART2_CTS__AUART2_CTS			0x30a0
+MX28_PAD_AUART2_RTS__AUART2_RTS			0x30b0
+MX28_PAD_AUART3_RX__AUART3_RX			0x30c0
+MX28_PAD_AUART3_TX__AUART3_TX			0x30d0
+MX28_PAD_AUART3_CTS__AUART3_CTS			0x30e0
+MX28_PAD_AUART3_RTS__AUART3_RTS			0x30f0
+MX28_PAD_PWM0__PWM_0				0x3100
+MX28_PAD_PWM1__PWM_1				0x3110
+MX28_PAD_PWM2__PWM_2				0x3120
+MX28_PAD_SAIF0_MCLK__SAIF0_MCLK			0x3140
+MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK		0x3150
+MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK		0x3160
+MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0		0x3170
+MX28_PAD_I2C0_SCL__I2C0_SCL			0x3180
+MX28_PAD_I2C0_SDA__I2C0_SDA			0x3190
+MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0		0x31a0
+MX28_PAD_SPDIF__SPDIF_TX			0x31b0
+MX28_PAD_PWM3__PWM_3				0x31c0
+MX28_PAD_PWM4__PWM_4				0x31d0
+MX28_PAD_LCD_RESET__LCD_RESET			0x31e0
+MX28_PAD_ENET0_MDC__ENET0_MDC			0x4000
+MX28_PAD_ENET0_MDIO__ENET0_MDIO			0x4010
+MX28_PAD_ENET0_RX_EN__ENET0_RX_EN		0x4020
+MX28_PAD_ENET0_RXD0__ENET0_RXD0			0x4030
+MX28_PAD_ENET0_RXD1__ENET0_RXD1			0x4040
+MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK		0x4050
+MX28_PAD_ENET0_TX_EN__ENET0_TX_EN		0x4060
+MX28_PAD_ENET0_TXD0__ENET0_TXD0			0x4070
+MX28_PAD_ENET0_TXD1__ENET0_TXD1			0x4080
+MX28_PAD_ENET0_RXD2__ENET0_RXD2			0x4090
+MX28_PAD_ENET0_RXD3__ENET0_RXD3			0x40a0
+MX28_PAD_ENET0_TXD2__ENET0_TXD2			0x40b0
+MX28_PAD_ENET0_TXD3__ENET0_TXD3			0x40c0
+MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK		0x40d0
+MX28_PAD_ENET0_COL__ENET0_COL			0x40e0
+MX28_PAD_ENET0_CRS__ENET0_CRS			0x40f0
+MX28_PAD_ENET_CLK__CLKCTRL_ENET			0x4100
+MX28_PAD_JTAG_RTCK__JTAG_RTCK			0x4140
+MX28_PAD_EMI_D00__EMI_DATA0			0x5000
+MX28_PAD_EMI_D01__EMI_DATA1			0x5010
+MX28_PAD_EMI_D02__EMI_DATA2			0x5020
+MX28_PAD_EMI_D03__EMI_DATA3			0x5030
+MX28_PAD_EMI_D04__EMI_DATA4			0x5040
+MX28_PAD_EMI_D05__EMI_DATA5			0x5050
+MX28_PAD_EMI_D06__EMI_DATA6			0x5060
+MX28_PAD_EMI_D07__EMI_DATA7			0x5070
+MX28_PAD_EMI_D08__EMI_DATA8			0x5080
+MX28_PAD_EMI_D09__EMI_DATA9			0x5090
+MX28_PAD_EMI_D10__EMI_DATA10			0x50a0
+MX28_PAD_EMI_D11__EMI_DATA11			0x50b0
+MX28_PAD_EMI_D12__EMI_DATA12			0x50c0
+MX28_PAD_EMI_D13__EMI_DATA13			0x50d0
+MX28_PAD_EMI_D14__EMI_DATA14			0x50e0
+MX28_PAD_EMI_D15__EMI_DATA15			0x50f0
+MX28_PAD_EMI_ODT0__EMI_ODT0			0x5100
+MX28_PAD_EMI_DQM0__EMI_DQM0			0x5110
+MX28_PAD_EMI_ODT1__EMI_ODT1			0x5120
+MX28_PAD_EMI_DQM1__EMI_DQM1			0x5130
+MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK	0x5140
+MX28_PAD_EMI_CLK__EMI_CLK			0x5150
+MX28_PAD_EMI_DQS0__EMI_DQS0			0x5160
+MX28_PAD_EMI_DQS1__EMI_DQS1			0x5170
+MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN		0x51a0
+MX28_PAD_EMI_A00__EMI_ADDR0			0x6000
+MX28_PAD_EMI_A01__EMI_ADDR1			0x6010
+MX28_PAD_EMI_A02__EMI_ADDR2			0x6020
+MX28_PAD_EMI_A03__EMI_ADDR3			0x6030
+MX28_PAD_EMI_A04__EMI_ADDR4			0x6040
+MX28_PAD_EMI_A05__EMI_ADDR5			0x6050
+MX28_PAD_EMI_A06__EMI_ADDR6			0x6060
+MX28_PAD_EMI_A07__EMI_ADDR7			0x6070
+MX28_PAD_EMI_A08__EMI_ADDR8			0x6080
+MX28_PAD_EMI_A09__EMI_ADDR9			0x6090
+MX28_PAD_EMI_A10__EMI_ADDR10			0x60a0
+MX28_PAD_EMI_A11__EMI_ADDR11			0x60b0
+MX28_PAD_EMI_A12__EMI_ADDR12			0x60c0
+MX28_PAD_EMI_A13__EMI_ADDR13			0x60d0
+MX28_PAD_EMI_A14__EMI_ADDR14			0x60e0
+MX28_PAD_EMI_BA0__EMI_BA0			0x6100
+MX28_PAD_EMI_BA1__EMI_BA1			0x6110
+MX28_PAD_EMI_BA2__EMI_BA2			0x6120
+MX28_PAD_EMI_CASN__EMI_CASN			0x6130
+MX28_PAD_EMI_RASN__EMI_RASN			0x6140
+MX28_PAD_EMI_WEN__EMI_WEN			0x6150
+MX28_PAD_EMI_CE0N__EMI_CE0N			0x6160
+MX28_PAD_EMI_CE1N__EMI_CE1N			0x6170
+MX28_PAD_EMI_CKE__EMI_CKE			0x6180
+MX28_PAD_GPMI_D00__SSP1_D0			0x0001
+MX28_PAD_GPMI_D01__SSP1_D1			0x0011
+MX28_PAD_GPMI_D02__SSP1_D2			0x0021
+MX28_PAD_GPMI_D03__SSP1_D3			0x0031
+MX28_PAD_GPMI_D04__SSP1_D4			0x0041
+MX28_PAD_GPMI_D05__SSP1_D5			0x0051
+MX28_PAD_GPMI_D06__SSP1_D6			0x0061
+MX28_PAD_GPMI_D07__SSP1_D7			0x0071
+MX28_PAD_GPMI_CE0N__SSP3_D0			0x0101
+MX28_PAD_GPMI_CE1N__SSP3_D3			0x0111
+MX28_PAD_GPMI_CE2N__CAN1_TX			0x0121
+MX28_PAD_GPMI_CE3N__CAN1_RX			0x0131
+MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT		0x0141
+MX28_PAD_GPMI_RDY1__SSP1_CMD			0x0151
+MX28_PAD_GPMI_RDY2__CAN0_TX			0x0161
+MX28_PAD_GPMI_RDY3__CAN0_RX			0x0171
+MX28_PAD_GPMI_RDN__SSP3_SCK			0x0181
+MX28_PAD_GPMI_WRN__SSP1_SCK			0x0191
+MX28_PAD_GPMI_ALE__SSP3_D1			0x01a1
+MX28_PAD_GPMI_CLE__SSP3_D2			0x01b1
+MX28_PAD_GPMI_RESETN__SSP3_CMD			0x01c1
+MX28_PAD_LCD_D03__ETM_DA8			0x1031
+MX28_PAD_LCD_D04__ETM_DA9			0x1041
+MX28_PAD_LCD_D08__ETM_DA3			0x1081
+MX28_PAD_LCD_D09__ETM_DA4			0x1091
+MX28_PAD_LCD_D20__ENET1_1588_EVENT2_OUT		0x1141
+MX28_PAD_LCD_D21__ENET1_1588_EVENT2_IN		0x1151
+MX28_PAD_LCD_D22__ENET1_1588_EVENT3_OUT		0x1161
+MX28_PAD_LCD_D23__ENET1_1588_EVENT3_IN		0x1171
+MX28_PAD_LCD_RD_E__LCD_VSYNC			0x1181
+MX28_PAD_LCD_WR_RWN__LCD_HSYNC			0x1191
+MX28_PAD_LCD_RS__LCD_DOTCLK			0x11a1
+MX28_PAD_LCD_CS__LCD_ENABLE			0x11b1
+MX28_PAD_LCD_VSYNC__SAIF1_SDATA0		0x11c1
+MX28_PAD_LCD_HSYNC__SAIF1_SDATA1		0x11d1
+MX28_PAD_LCD_DOTCLK__SAIF1_MCLK			0x11e1
+MX28_PAD_SSP0_DATA4__SSP2_D0			0x2041
+MX28_PAD_SSP0_DATA5__SSP2_D3			0x2051
+MX28_PAD_SSP0_DATA6__SSP2_CMD			0x2061
+MX28_PAD_SSP0_DATA7__SSP2_SCK			0x2071
+MX28_PAD_SSP1_SCK__SSP2_D1			0x20c1
+MX28_PAD_SSP1_CMD__SSP2_D2			0x20d1
+MX28_PAD_SSP1_DATA0__SSP2_D6			0x20e1
+MX28_PAD_SSP1_DATA3__SSP2_D7			0x20f1
+MX28_PAD_SSP2_SCK__AUART2_RX			0x2101
+MX28_PAD_SSP2_MOSI__AUART2_TX			0x2111
+MX28_PAD_SSP2_MISO__AUART3_RX			0x2121
+MX28_PAD_SSP2_SS0__AUART3_TX			0x2131
+MX28_PAD_SSP2_SS1__SSP2_D1			0x2141
+MX28_PAD_SSP2_SS2__SSP2_D2			0x2151
+MX28_PAD_SSP3_SCK__AUART4_TX			0x2181
+MX28_PAD_SSP3_MOSI__AUART4_RX			0x2191
+MX28_PAD_SSP3_MISO__AUART4_RTS			0x21a1
+MX28_PAD_SSP3_SS0__AUART4_CTS			0x21b1
+MX28_PAD_AUART0_RX__I2C0_SCL			0x3001
+MX28_PAD_AUART0_TX__I2C0_SDA			0x3011
+MX28_PAD_AUART0_CTS__AUART4_RX			0x3021
+MX28_PAD_AUART0_RTS__AUART4_TX			0x3031
+MX28_PAD_AUART1_RX__SSP2_CARD_DETECT		0x3041
+MX28_PAD_AUART1_TX__SSP3_CARD_DETECT		0x3051
+MX28_PAD_AUART1_CTS__USB0_OVERCURRENT		0x3061
+MX28_PAD_AUART1_RTS__USB0_ID			0x3071
+MX28_PAD_AUART2_RX__SSP3_D1			0x3081
+MX28_PAD_AUART2_TX__SSP3_D2			0x3091
+MX28_PAD_AUART2_CTS__I2C1_SCL			0x30a1
+MX28_PAD_AUART2_RTS__I2C1_SDA			0x30b1
+MX28_PAD_AUART3_RX__CAN0_TX			0x30c1
+MX28_PAD_AUART3_TX__CAN0_RX			0x30d1
+MX28_PAD_AUART3_CTS__CAN1_TX			0x30e1
+MX28_PAD_AUART3_RTS__CAN1_RX			0x30f1
+MX28_PAD_PWM0__I2C1_SCL				0x3101
+MX28_PAD_PWM1__I2C1_SDA				0x3111
+MX28_PAD_PWM2__USB0_ID				0x3121
+MX28_PAD_SAIF0_MCLK__PWM_3			0x3141
+MX28_PAD_SAIF0_LRCLK__PWM_4			0x3151
+MX28_PAD_SAIF0_BITCLK__PWM_5			0x3161
+MX28_PAD_SAIF0_SDATA0__PWM_6			0x3171
+MX28_PAD_I2C0_SCL__TIMROT_ROTARYA		0x3181
+MX28_PAD_I2C0_SDA__TIMROT_ROTARYB		0x3191
+MX28_PAD_SAIF1_SDATA0__PWM_7			0x31a1
+MX28_PAD_LCD_RESET__LCD_VSYNC			0x31e1
+MX28_PAD_ENET0_MDC__GPMI_CE4N			0x4001
+MX28_PAD_ENET0_MDIO__GPMI_CE5N			0x4011
+MX28_PAD_ENET0_RX_EN__GPMI_CE6N			0x4021
+MX28_PAD_ENET0_RXD0__GPMI_CE7N			0x4031
+MX28_PAD_ENET0_RXD1__GPMI_READY4		0x4041
+MX28_PAD_ENET0_TX_CLK__HSADC_TRIGGER		0x4051
+MX28_PAD_ENET0_TX_EN__GPMI_READY5		0x4061
+MX28_PAD_ENET0_TXD0__GPMI_READY6		0x4071
+MX28_PAD_ENET0_TXD1__GPMI_READY7		0x4081
+MX28_PAD_ENET0_RXD2__ENET1_RXD0			0x4091
+MX28_PAD_ENET0_RXD3__ENET1_RXD1			0x40a1
+MX28_PAD_ENET0_TXD2__ENET1_TXD0			0x40b1
+MX28_PAD_ENET0_TXD3__ENET1_TXD1			0x40c1
+MX28_PAD_ENET0_RX_CLK__ENET0_RX_ER		0x40d1
+MX28_PAD_ENET0_COL__ENET1_TX_EN			0x40e1
+MX28_PAD_ENET0_CRS__ENET1_RX_EN			0x40f1
+MX28_PAD_GPMI_CE2N__ENET0_RX_ER			0x0122
+MX28_PAD_GPMI_CE3N__SAIF1_MCLK			0x0132
+MX28_PAD_GPMI_RDY0__USB0_ID			0x0142
+MX28_PAD_GPMI_RDY2__ENET0_TX_ER			0x0162
+MX28_PAD_GPMI_RDY3__HSADC_TRIGGER		0x0172
+MX28_PAD_GPMI_ALE__SSP3_D4			0x01a2
+MX28_PAD_GPMI_CLE__SSP3_D5			0x01b2
+MX28_PAD_LCD_D00__ETM_DA0			0x1002
+MX28_PAD_LCD_D01__ETM_DA1			0x1012
+MX28_PAD_LCD_D02__ETM_DA2			0x1022
+MX28_PAD_LCD_D03__ETM_DA3			0x1032
+MX28_PAD_LCD_D04__ETM_DA4			0x1042
+MX28_PAD_LCD_D05__ETM_DA5			0x1052
+MX28_PAD_LCD_D06__ETM_DA6			0x1062
+MX28_PAD_LCD_D07__ETM_DA7			0x1072
+MX28_PAD_LCD_D08__ETM_DA8			0x1082
+MX28_PAD_LCD_D09__ETM_DA9			0x1092
+MX28_PAD_LCD_D10__ETM_DA10			0x10a2
+MX28_PAD_LCD_D11__ETM_DA11			0x10b2
+MX28_PAD_LCD_D12__ETM_DA12			0x10c2
+MX28_PAD_LCD_D13__ETM_DA13			0x10d2
+MX28_PAD_LCD_D14__ETM_DA14			0x10e2
+MX28_PAD_LCD_D15__ETM_DA15			0x10f2
+MX28_PAD_LCD_D16__ETM_DA7			0x1102
+MX28_PAD_LCD_D17__ETM_DA6			0x1112
+MX28_PAD_LCD_D18__ETM_DA5			0x1122
+MX28_PAD_LCD_D19__ETM_DA4			0x1132
+MX28_PAD_LCD_D20__ETM_DA3			0x1142
+MX28_PAD_LCD_D21__ETM_DA2			0x1152
+MX28_PAD_LCD_D22__ETM_DA1			0x1162
+MX28_PAD_LCD_D23__ETM_DA0			0x1172
+MX28_PAD_LCD_RD_E__ETM_TCTL			0x1182
+MX28_PAD_LCD_WR_RWN__ETM_TCLK			0x1192
+MX28_PAD_LCD_HSYNC__ETM_TCTL			0x11d2
+MX28_PAD_LCD_DOTCLK__ETM_TCLK			0x11e2
+MX28_PAD_SSP1_SCK__ENET0_1588_EVENT2_OUT	0x20c2
+MX28_PAD_SSP1_CMD__ENET0_1588_EVENT2_IN		0x20d2
+MX28_PAD_SSP1_DATA0__ENET0_1588_EVENT3_OUT	0x20e2
+MX28_PAD_SSP1_DATA3__ENET0_1588_EVENT3_IN	0x20f2
+MX28_PAD_SSP2_SCK__SAIF0_SDATA1			0x2102
+MX28_PAD_SSP2_MOSI__SAIF0_SDATA2		0x2112
+MX28_PAD_SSP2_MISO__SAIF1_SDATA1		0x2122
+MX28_PAD_SSP2_SS0__SAIF1_SDATA2			0x2132
+MX28_PAD_SSP2_SS1__USB1_OVERCURRENT		0x2142
+MX28_PAD_SSP2_SS2__USB0_OVERCURRENT		0x2152
+MX28_PAD_SSP3_SCK__ENET1_1588_EVENT0_OUT	0x2182
+MX28_PAD_SSP3_MOSI__ENET1_1588_EVENT0_IN	0x2192
+MX28_PAD_SSP3_MISO__ENET1_1588_EVENT1_OUT	0x21a2
+MX28_PAD_SSP3_SS0__ENET1_1588_EVENT1_IN		0x21b2
+MX28_PAD_AUART0_RX__DUART_CTS			0x3002
+MX28_PAD_AUART0_TX__DUART_RTS			0x3012
+MX28_PAD_AUART0_CTS__DUART_RX			0x3022
+MX28_PAD_AUART0_RTS__DUART_TX			0x3032
+MX28_PAD_AUART1_RX__PWM_0			0x3042
+MX28_PAD_AUART1_TX__PWM_1			0x3052
+MX28_PAD_AUART1_CTS__TIMROT_ROTARYA		0x3062
+MX28_PAD_AUART1_RTS__TIMROT_ROTARYB		0x3072
+MX28_PAD_AUART2_RX__SSP3_D4			0x3082
+MX28_PAD_AUART2_TX__SSP3_D5			0x3092
+MX28_PAD_AUART2_CTS__SAIF1_BITCLK		0x30a2
+MX28_PAD_AUART2_RTS__SAIF1_LRCLK		0x30b2
+MX28_PAD_AUART3_RX__ENET0_1588_EVENT0_OUT	0x30c2
+MX28_PAD_AUART3_TX__ENET0_1588_EVENT0_IN	0x30d2
+MX28_PAD_AUART3_CTS__ENET0_1588_EVENT1_OUT	0x30e2
+MX28_PAD_AUART3_RTS__ENET0_1588_EVENT1_IN	0x30f2
+MX28_PAD_PWM0__DUART_RX				0x3102
+MX28_PAD_PWM1__DUART_TX				0x3112
+MX28_PAD_PWM2__USB1_OVERCURRENT			0x3122
+MX28_PAD_SAIF0_MCLK__AUART4_CTS			0x3142
+MX28_PAD_SAIF0_LRCLK__AUART4_RTS		0x3152
+MX28_PAD_SAIF0_BITCLK__AUART4_RX		0x3162
+MX28_PAD_SAIF0_SDATA0__AUART4_TX		0x3172
+MX28_PAD_I2C0_SCL__DUART_RX			0x3182
+MX28_PAD_I2C0_SDA__DUART_TX			0x3192
+MX28_PAD_SAIF1_SDATA0__SAIF0_SDATA1		0x31a2
+MX28_PAD_SPDIF__ENET1_RX_ER			0x31b2
+MX28_PAD_ENET0_MDC__SAIF0_SDATA1		0x4002
+MX28_PAD_ENET0_MDIO__SAIF0_SDATA2		0x4012
+MX28_PAD_ENET0_RX_EN__SAIF1_SDATA1		0x4022
+MX28_PAD_ENET0_RXD0__SAIF1_SDATA2		0x4032
+MX28_PAD_ENET0_TX_CLK__ENET0_1588_EVENT2_OUT	0x4052
+MX28_PAD_ENET0_RXD2__ENET0_1588_EVENT0_OUT	0x4092
+MX28_PAD_ENET0_RXD3__ENET0_1588_EVENT0_IN	0x40a2
+MX28_PAD_ENET0_TXD2__ENET0_1588_EVENT1_OUT	0x40b2
+MX28_PAD_ENET0_TXD3__ENET0_1588_EVENT1_IN	0x40c2
+MX28_PAD_ENET0_RX_CLK__ENET0_1588_EVENT2_IN	0x40d2
+MX28_PAD_ENET0_COL__ENET0_1588_EVENT3_OUT	0x40e2
+MX28_PAD_ENET0_CRS__ENET0_1588_EVENT3_IN	0x40f2
+MX28_PAD_GPMI_D00__GPIO_0_0			0x0003
+MX28_PAD_GPMI_D01__GPIO_0_1			0x0013
+MX28_PAD_GPMI_D02__GPIO_0_2			0x0023
+MX28_PAD_GPMI_D03__GPIO_0_3			0x0033
+MX28_PAD_GPMI_D04__GPIO_0_4			0x0043
+MX28_PAD_GPMI_D05__GPIO_0_5			0x0053
+MX28_PAD_GPMI_D06__GPIO_0_6			0x0063
+MX28_PAD_GPMI_D07__GPIO_0_7			0x0073
+MX28_PAD_GPMI_CE0N__GPIO_0_16			0x0103
+MX28_PAD_GPMI_CE1N__GPIO_0_17			0x0113
+MX28_PAD_GPMI_CE2N__GPIO_0_18			0x0123
+MX28_PAD_GPMI_CE3N__GPIO_0_19			0x0133
+MX28_PAD_GPMI_RDY0__GPIO_0_20			0x0143
+MX28_PAD_GPMI_RDY1__GPIO_0_21			0x0153
+MX28_PAD_GPMI_RDY2__GPIO_0_22			0x0163
+MX28_PAD_GPMI_RDY3__GPIO_0_23			0x0173
+MX28_PAD_GPMI_RDN__GPIO_0_24			0x0183
+MX28_PAD_GPMI_WRN__GPIO_0_25			0x0193
+MX28_PAD_GPMI_ALE__GPIO_0_26			0x01a3
+MX28_PAD_GPMI_CLE__GPIO_0_27			0x01b3
+MX28_PAD_GPMI_RESETN__GPIO_0_28			0x01c3
+MX28_PAD_LCD_D00__GPIO_1_0			0x1003
+MX28_PAD_LCD_D01__GPIO_1_1			0x1013
+MX28_PAD_LCD_D02__GPIO_1_2			0x1023
+MX28_PAD_LCD_D03__GPIO_1_3			0x1033
+MX28_PAD_LCD_D04__GPIO_1_4			0x1043
+MX28_PAD_LCD_D05__GPIO_1_5			0x1053
+MX28_PAD_LCD_D06__GPIO_1_6			0x1063
+MX28_PAD_LCD_D07__GPIO_1_7			0x1073
+MX28_PAD_LCD_D08__GPIO_1_8			0x1083
+MX28_PAD_LCD_D09__GPIO_1_9			0x1093
+MX28_PAD_LCD_D10__GPIO_1_10			0x10a3
+MX28_PAD_LCD_D11__GPIO_1_11			0x10b3
+MX28_PAD_LCD_D12__GPIO_1_12			0x10c3
+MX28_PAD_LCD_D13__GPIO_1_13			0x10d3
+MX28_PAD_LCD_D14__GPIO_1_14			0x10e3
+MX28_PAD_LCD_D15__GPIO_1_15			0x10f3
+MX28_PAD_LCD_D16__GPIO_1_16			0x1103
+MX28_PAD_LCD_D17__GPIO_1_17			0x1113
+MX28_PAD_LCD_D18__GPIO_1_18			0x1123
+MX28_PAD_LCD_D19__GPIO_1_19			0x1133
+MX28_PAD_LCD_D20__GPIO_1_20			0x1143
+MX28_PAD_LCD_D21__GPIO_1_21			0x1153
+MX28_PAD_LCD_D22__GPIO_1_22			0x1163
+MX28_PAD_LCD_D23__GPIO_1_23			0x1173
+MX28_PAD_LCD_RD_E__GPIO_1_24			0x1183
+MX28_PAD_LCD_WR_RWN__GPIO_1_25			0x1193
+MX28_PAD_LCD_RS__GPIO_1_26			0x11a3
+MX28_PAD_LCD_CS__GPIO_1_27			0x11b3
+MX28_PAD_LCD_VSYNC__GPIO_1_28			0x11c3
+MX28_PAD_LCD_HSYNC__GPIO_1_29			0x11d3
+MX28_PAD_LCD_DOTCLK__GPIO_1_30			0x11e3
+MX28_PAD_LCD_ENABLE__GPIO_1_31			0x11f3
+MX28_PAD_SSP0_DATA0__GPIO_2_0			0x2003
+MX28_PAD_SSP0_DATA1__GPIO_2_1			0x2013
+MX28_PAD_SSP0_DATA2__GPIO_2_2			0x2023
+MX28_PAD_SSP0_DATA3__GPIO_2_3			0x2033
+MX28_PAD_SSP0_DATA4__GPIO_2_4			0x2043
+MX28_PAD_SSP0_DATA5__GPIO_2_5			0x2053
+MX28_PAD_SSP0_DATA6__GPIO_2_6			0x2063
+MX28_PAD_SSP0_DATA7__GPIO_2_7			0x2073
+MX28_PAD_SSP0_CMD__GPIO_2_8			0x2083
+MX28_PAD_SSP0_DETECT__GPIO_2_9			0x2093
+MX28_PAD_SSP0_SCK__GPIO_2_10			0x20a3
+MX28_PAD_SSP1_SCK__GPIO_2_12			0x20c3
+MX28_PAD_SSP1_CMD__GPIO_2_13			0x20d3
+MX28_PAD_SSP1_DATA0__GPIO_2_14			0x20e3
+MX28_PAD_SSP1_DATA3__GPIO_2_15			0x20f3
+MX28_PAD_SSP2_SCK__GPIO_2_16			0x2103
+MX28_PAD_SSP2_MOSI__GPIO_2_17			0x2113
+MX28_PAD_SSP2_MISO__GPIO_2_18			0x2123
+MX28_PAD_SSP2_SS0__GPIO_2_19			0x2133
+MX28_PAD_SSP2_SS1__GPIO_2_20			0x2143
+MX28_PAD_SSP2_SS2__GPIO_2_21			0x2153
+MX28_PAD_SSP3_SCK__GPIO_2_24			0x2183
+MX28_PAD_SSP3_MOSI__GPIO_2_25			0x2193
+MX28_PAD_SSP3_MISO__GPIO_2_26			0x21a3
+MX28_PAD_SSP3_SS0__GPIO_2_27			0x21b3
+MX28_PAD_AUART0_RX__GPIO_3_0			0x3003
+MX28_PAD_AUART0_TX__GPIO_3_1			0x3013
+MX28_PAD_AUART0_CTS__GPIO_3_2			0x3023
+MX28_PAD_AUART0_RTS__GPIO_3_3			0x3033
+MX28_PAD_AUART1_RX__GPIO_3_4			0x3043
+MX28_PAD_AUART1_TX__GPIO_3_5			0x3053
+MX28_PAD_AUART1_CTS__GPIO_3_6			0x3063
+MX28_PAD_AUART1_RTS__GPIO_3_7			0x3073
+MX28_PAD_AUART2_RX__GPIO_3_8			0x3083
+MX28_PAD_AUART2_TX__GPIO_3_9			0x3093
+MX28_PAD_AUART2_CTS__GPIO_3_10			0x30a3
+MX28_PAD_AUART2_RTS__GPIO_3_11			0x30b3
+MX28_PAD_AUART3_RX__GPIO_3_12			0x30c3
+MX28_PAD_AUART3_TX__GPIO_3_13			0x30d3
+MX28_PAD_AUART3_CTS__GPIO_3_14			0x30e3
+MX28_PAD_AUART3_RTS__GPIO_3_15			0x30f3
+MX28_PAD_PWM0__GPIO_3_16			0x3103
+MX28_PAD_PWM1__GPIO_3_17			0x3113
+MX28_PAD_PWM2__GPIO_3_18			0x3123
+MX28_PAD_SAIF0_MCLK__GPIO_3_20			0x3143
+MX28_PAD_SAIF0_LRCLK__GPIO_3_21			0x3153
+MX28_PAD_SAIF0_BITCLK__GPIO_3_22		0x3163
+MX28_PAD_SAIF0_SDATA0__GPIO_3_23		0x3173
+MX28_PAD_I2C0_SCL__GPIO_3_24			0x3183
+MX28_PAD_I2C0_SDA__GPIO_3_25			0x3193
+MX28_PAD_SAIF1_SDATA0__GPIO_3_26		0x31a3
+MX28_PAD_SPDIF__GPIO_3_27			0x31b3
+MX28_PAD_PWM3__GPIO_3_28			0x31c3
+MX28_PAD_PWM4__GPIO_3_29			0x31d3
+MX28_PAD_LCD_RESET__GPIO_3_30			0x31e3
+MX28_PAD_ENET0_MDC__GPIO_4_0			0x4003
+MX28_PAD_ENET0_MDIO__GPIO_4_1			0x4013
+MX28_PAD_ENET0_RX_EN__GPIO_4_2			0x4023
+MX28_PAD_ENET0_RXD0__GPIO_4_3			0x4033
+MX28_PAD_ENET0_RXD1__GPIO_4_4			0x4043
+MX28_PAD_ENET0_TX_CLK__GPIO_4_5			0x4053
+MX28_PAD_ENET0_TX_EN__GPIO_4_6			0x4063
+MX28_PAD_ENET0_TXD0__GPIO_4_7			0x4073
+MX28_PAD_ENET0_TXD1__GPIO_4_8			0x4083
+MX28_PAD_ENET0_RXD2__GPIO_4_9			0x4093
+MX28_PAD_ENET0_RXD3__GPIO_4_10			0x40a3
+MX28_PAD_ENET0_TXD2__GPIO_4_11			0x40b3
+MX28_PAD_ENET0_TXD3__GPIO_4_12			0x40c3
+MX28_PAD_ENET0_RX_CLK__GPIO_4_13		0x40d3
+MX28_PAD_ENET0_COL__GPIO_4_14			0x40e3
+MX28_PAD_ENET0_CRS__GPIO_4_15			0x40f3
+MX28_PAD_ENET_CLK__GPIO_4_16			0x4103
+MX28_PAD_JTAG_RTCK__GPIO_4_20			0x4143
+
+Valid values for i.MX23 pinmux-id:
+
+pinmux						id
+------						--
+MX23_PAD_GPMI_D00__GPMI_D00			0x0000
+MX23_PAD_GPMI_D01__GPMI_D01			0x0010
+MX23_PAD_GPMI_D02__GPMI_D02			0x0020
+MX23_PAD_GPMI_D03__GPMI_D03			0x0030
+MX23_PAD_GPMI_D04__GPMI_D04			0x0040
+MX23_PAD_GPMI_D05__GPMI_D05			0x0050
+MX23_PAD_GPMI_D06__GPMI_D06			0x0060
+MX23_PAD_GPMI_D07__GPMI_D07			0x0070
+MX23_PAD_GPMI_D08__GPMI_D08			0x0080
+MX23_PAD_GPMI_D09__GPMI_D09			0x0090
+MX23_PAD_GPMI_D10__GPMI_D10			0x00a0
+MX23_PAD_GPMI_D11__GPMI_D11			0x00b0
+MX23_PAD_GPMI_D12__GPMI_D12			0x00c0
+MX23_PAD_GPMI_D13__GPMI_D13			0x00d0
+MX23_PAD_GPMI_D14__GPMI_D14			0x00e0
+MX23_PAD_GPMI_D15__GPMI_D15			0x00f0
+MX23_PAD_GPMI_CLE__GPMI_CLE			0x0100
+MX23_PAD_GPMI_ALE__GPMI_ALE			0x0110
+MX23_PAD_GPMI_CE2N__GPMI_CE2N			0x0120
+MX23_PAD_GPMI_RDY0__GPMI_RDY0			0x0130
+MX23_PAD_GPMI_RDY1__GPMI_RDY1			0x0140
+MX23_PAD_GPMI_RDY2__GPMI_RDY2			0x0150
+MX23_PAD_GPMI_RDY3__GPMI_RDY3			0x0160
+MX23_PAD_GPMI_WPN__GPMI_WPN			0x0170
+MX23_PAD_GPMI_WRN__GPMI_WRN			0x0180
+MX23_PAD_GPMI_RDN__GPMI_RDN			0x0190
+MX23_PAD_AUART1_CTS__AUART1_CTS			0x01a0
+MX23_PAD_AUART1_RTS__AUART1_RTS			0x01b0
+MX23_PAD_AUART1_RX__AUART1_RX			0x01c0
+MX23_PAD_AUART1_TX__AUART1_TX			0x01d0
+MX23_PAD_I2C_SCL__I2C_SCL			0x01e0
+MX23_PAD_I2C_SDA__I2C_SDA			0x01f0
+MX23_PAD_LCD_D00__LCD_D00			0x1000
+MX23_PAD_LCD_D01__LCD_D01			0x1010
+MX23_PAD_LCD_D02__LCD_D02			0x1020
+MX23_PAD_LCD_D03__LCD_D03			0x1030
+MX23_PAD_LCD_D04__LCD_D04			0x1040
+MX23_PAD_LCD_D05__LCD_D05			0x1050
+MX23_PAD_LCD_D06__LCD_D06			0x1060
+MX23_PAD_LCD_D07__LCD_D07			0x1070
+MX23_PAD_LCD_D08__LCD_D08			0x1080
+MX23_PAD_LCD_D09__LCD_D09			0x1090
+MX23_PAD_LCD_D10__LCD_D10			0x10a0
+MX23_PAD_LCD_D11__LCD_D11			0x10b0
+MX23_PAD_LCD_D12__LCD_D12			0x10c0
+MX23_PAD_LCD_D13__LCD_D13			0x10d0
+MX23_PAD_LCD_D14__LCD_D14			0x10e0
+MX23_PAD_LCD_D15__LCD_D15			0x10f0
+MX23_PAD_LCD_D16__LCD_D16			0x1100
+MX23_PAD_LCD_D17__LCD_D17			0x1110
+MX23_PAD_LCD_RESET__LCD_RESET			0x1120
+MX23_PAD_LCD_RS__LCD_RS				0x1130
+MX23_PAD_LCD_WR__LCD_WR				0x1140
+MX23_PAD_LCD_CS__LCD_CS				0x1150
+MX23_PAD_LCD_DOTCK__LCD_DOTCK			0x1160
+MX23_PAD_LCD_ENABLE__LCD_ENABLE			0x1170
+MX23_PAD_LCD_HSYNC__LCD_HSYNC			0x1180
+MX23_PAD_LCD_VSYNC__LCD_VSYNC			0x1190
+MX23_PAD_PWM0__PWM0				0x11a0
+MX23_PAD_PWM1__PWM1				0x11b0
+MX23_PAD_PWM2__PWM2				0x11c0
+MX23_PAD_PWM3__PWM3				0x11d0
+MX23_PAD_PWM4__PWM4				0x11e0
+MX23_PAD_SSP1_CMD__SSP1_CMD			0x2000
+MX23_PAD_SSP1_DETECT__SSP1_DETECT		0x2010
+MX23_PAD_SSP1_DATA0__SSP1_DATA0			0x2020
+MX23_PAD_SSP1_DATA1__SSP1_DATA1			0x2030
+MX23_PAD_SSP1_DATA2__SSP1_DATA2			0x2040
+MX23_PAD_SSP1_DATA3__SSP1_DATA3			0x2050
+MX23_PAD_SSP1_SCK__SSP1_SCK			0x2060
+MX23_PAD_ROTARYA__ROTARYA			0x2070
+MX23_PAD_ROTARYB__ROTARYB			0x2080
+MX23_PAD_EMI_A00__EMI_A00			0x2090
+MX23_PAD_EMI_A01__EMI_A01			0x20a0
+MX23_PAD_EMI_A02__EMI_A02			0x20b0
+MX23_PAD_EMI_A03__EMI_A03			0x20c0
+MX23_PAD_EMI_A04__EMI_A04			0x20d0
+MX23_PAD_EMI_A05__EMI_A05			0x20e0
+MX23_PAD_EMI_A06__EMI_A06			0x20f0
+MX23_PAD_EMI_A07__EMI_A07			0x2100
+MX23_PAD_EMI_A08__EMI_A08			0x2110
+MX23_PAD_EMI_A09__EMI_A09			0x2120
+MX23_PAD_EMI_A10__EMI_A10			0x2130
+MX23_PAD_EMI_A11__EMI_A11			0x2140
+MX23_PAD_EMI_A12__EMI_A12			0x2150
+MX23_PAD_EMI_BA0__EMI_BA0			0x2160
+MX23_PAD_EMI_BA1__EMI_BA1			0x2170
+MX23_PAD_EMI_CASN__EMI_CASN			0x2180
+MX23_PAD_EMI_CE0N__EMI_CE0N			0x2190
+MX23_PAD_EMI_CE1N__EMI_CE1N			0x21a0
+MX23_PAD_GPMI_CE1N__GPMI_CE1N			0x21b0
+MX23_PAD_GPMI_CE0N__GPMI_CE0N			0x21c0
+MX23_PAD_EMI_CKE__EMI_CKE			0x21d0
+MX23_PAD_EMI_RASN__EMI_RASN			0x21e0
+MX23_PAD_EMI_WEN__EMI_WEN			0x21f0
+MX23_PAD_EMI_D00__EMI_D00			0x3000
+MX23_PAD_EMI_D01__EMI_D01			0x3010
+MX23_PAD_EMI_D02__EMI_D02			0x3020
+MX23_PAD_EMI_D03__EMI_D03			0x3030
+MX23_PAD_EMI_D04__EMI_D04			0x3040
+MX23_PAD_EMI_D05__EMI_D05			0x3050
+MX23_PAD_EMI_D06__EMI_D06			0x3060
+MX23_PAD_EMI_D07__EMI_D07			0x3070
+MX23_PAD_EMI_D08__EMI_D08			0x3080
+MX23_PAD_EMI_D09__EMI_D09			0x3090
+MX23_PAD_EMI_D10__EMI_D10			0x30a0
+MX23_PAD_EMI_D11__EMI_D11			0x30b0
+MX23_PAD_EMI_D12__EMI_D12			0x30c0
+MX23_PAD_EMI_D13__EMI_D13			0x30d0
+MX23_PAD_EMI_D14__EMI_D14			0x30e0
+MX23_PAD_EMI_D15__EMI_D15			0x30f0
+MX23_PAD_EMI_DQM0__EMI_DQM0			0x3100
+MX23_PAD_EMI_DQM1__EMI_DQM1			0x3110
+MX23_PAD_EMI_DQS0__EMI_DQS0			0x3120
+MX23_PAD_EMI_DQS1__EMI_DQS1			0x3130
+MX23_PAD_EMI_CLK__EMI_CLK			0x3140
+MX23_PAD_EMI_CLKN__EMI_CLKN			0x3150
+MX23_PAD_GPMI_D00__LCD_D8			0x0001
+MX23_PAD_GPMI_D01__LCD_D9			0x0011
+MX23_PAD_GPMI_D02__LCD_D10			0x0021
+MX23_PAD_GPMI_D03__LCD_D11			0x0031
+MX23_PAD_GPMI_D04__LCD_D12			0x0041
+MX23_PAD_GPMI_D05__LCD_D13			0x0051
+MX23_PAD_GPMI_D06__LCD_D14			0x0061
+MX23_PAD_GPMI_D07__LCD_D15			0x0071
+MX23_PAD_GPMI_D08__LCD_D18			0x0081
+MX23_PAD_GPMI_D09__LCD_D19			0x0091
+MX23_PAD_GPMI_D10__LCD_D20			0x00a1
+MX23_PAD_GPMI_D11__LCD_D21			0x00b1
+MX23_PAD_GPMI_D12__LCD_D22			0x00c1
+MX23_PAD_GPMI_D13__LCD_D23			0x00d1
+MX23_PAD_GPMI_D14__AUART2_RX			0x00e1
+MX23_PAD_GPMI_D15__AUART2_TX			0x00f1
+MX23_PAD_GPMI_CLE__LCD_D16			0x0101
+MX23_PAD_GPMI_ALE__LCD_D17			0x0111
+MX23_PAD_GPMI_CE2N__ATA_A2			0x0121
+MX23_PAD_AUART1_RTS__IR_CLK			0x01b1
+MX23_PAD_AUART1_RX__IR_RX			0x01c1
+MX23_PAD_AUART1_TX__IR_TX			0x01d1
+MX23_PAD_I2C_SCL__GPMI_RDY2			0x01e1
+MX23_PAD_I2C_SDA__GPMI_CE2N			0x01f1
+MX23_PAD_LCD_D00__ETM_DA8			0x1001
+MX23_PAD_LCD_D01__ETM_DA9			0x1011
+MX23_PAD_LCD_D02__ETM_DA10			0x1021
+MX23_PAD_LCD_D03__ETM_DA11			0x1031
+MX23_PAD_LCD_D04__ETM_DA12			0x1041
+MX23_PAD_LCD_D05__ETM_DA13			0x1051
+MX23_PAD_LCD_D06__ETM_DA14			0x1061
+MX23_PAD_LCD_D07__ETM_DA15			0x1071
+MX23_PAD_LCD_D08__ETM_DA0			0x1081
+MX23_PAD_LCD_D09__ETM_DA1			0x1091
+MX23_PAD_LCD_D10__ETM_DA2			0x10a1
+MX23_PAD_LCD_D11__ETM_DA3			0x10b1
+MX23_PAD_LCD_D12__ETM_DA4			0x10c1
+MX23_PAD_LCD_D13__ETM_DA5			0x10d1
+MX23_PAD_LCD_D14__ETM_DA6			0x10e1
+MX23_PAD_LCD_D15__ETM_DA7			0x10f1
+MX23_PAD_LCD_RESET__ETM_TCTL			0x1121
+MX23_PAD_LCD_RS__ETM_TCLK			0x1131
+MX23_PAD_LCD_DOTCK__GPMI_RDY3			0x1161
+MX23_PAD_LCD_ENABLE__I2C_SCL			0x1171
+MX23_PAD_LCD_HSYNC__I2C_SDA			0x1181
+MX23_PAD_LCD_VSYNC__LCD_BUSY			0x1191
+MX23_PAD_PWM0__ROTARYA				0x11a1
+MX23_PAD_PWM1__ROTARYB				0x11b1
+MX23_PAD_PWM2__GPMI_RDY3			0x11c1
+MX23_PAD_PWM3__ETM_TCTL				0x11d1
+MX23_PAD_PWM4__ETM_TCLK				0x11e1
+MX23_PAD_SSP1_DETECT__GPMI_CE3N			0x2011
+MX23_PAD_SSP1_DATA1__I2C_SCL			0x2031
+MX23_PAD_SSP1_DATA2__I2C_SDA			0x2041
+MX23_PAD_ROTARYA__AUART2_RTS			0x2071
+MX23_PAD_ROTARYB__AUART2_CTS			0x2081
+MX23_PAD_GPMI_D00__SSP2_DATA0			0x0002
+MX23_PAD_GPMI_D01__SSP2_DATA1			0x0012
+MX23_PAD_GPMI_D02__SSP2_DATA2			0x0022
+MX23_PAD_GPMI_D03__SSP2_DATA3			0x0032
+MX23_PAD_GPMI_D04__SSP2_DATA4			0x0042
+MX23_PAD_GPMI_D05__SSP2_DATA5			0x0052
+MX23_PAD_GPMI_D06__SSP2_DATA6			0x0062
+MX23_PAD_GPMI_D07__SSP2_DATA7			0x0072
+MX23_PAD_GPMI_D08__SSP1_DATA4			0x0082
+MX23_PAD_GPMI_D09__SSP1_DATA5			0x0092
+MX23_PAD_GPMI_D10__SSP1_DATA6			0x00a2
+MX23_PAD_GPMI_D11__SSP1_DATA7			0x00b2
+MX23_PAD_GPMI_D15__GPMI_CE3N			0x00f2
+MX23_PAD_GPMI_RDY0__SSP2_DETECT			0x0132
+MX23_PAD_GPMI_RDY1__SSP2_CMD			0x0142
+MX23_PAD_GPMI_WRN__SSP2_SCK			0x0182
+MX23_PAD_AUART1_CTS__SSP1_DATA4			0x01a2
+MX23_PAD_AUART1_RTS__SSP1_DATA5			0x01b2
+MX23_PAD_AUART1_RX__SSP1_DATA6			0x01c2
+MX23_PAD_AUART1_TX__SSP1_DATA7			0x01d2
+MX23_PAD_I2C_SCL__AUART1_TX			0x01e2
+MX23_PAD_I2C_SDA__AUART1_RX			0x01f2
+MX23_PAD_LCD_D08__SAIF2_SDATA0			0x1082
+MX23_PAD_LCD_D09__SAIF1_SDATA0			0x1092
+MX23_PAD_LCD_D10__SAIF_MCLK_BITCLK		0x10a2
+MX23_PAD_LCD_D11__SAIF_LRCLK			0x10b2
+MX23_PAD_LCD_D12__SAIF2_SDATA1			0x10c2
+MX23_PAD_LCD_D13__SAIF2_SDATA2			0x10d2
+MX23_PAD_LCD_D14__SAIF1_SDATA2			0x10e2
+MX23_PAD_LCD_D15__SAIF1_SDATA1			0x10f2
+MX23_PAD_LCD_D16__SAIF_ALT_BITCLK		0x1102
+MX23_PAD_LCD_RESET__GPMI_CE3N			0x1122
+MX23_PAD_PWM0__DUART_RX				0x11a2
+MX23_PAD_PWM1__DUART_TX				0x11b2
+MX23_PAD_PWM3__AUART1_CTS			0x11d2
+MX23_PAD_PWM4__AUART1_RTS			0x11e2
+MX23_PAD_SSP1_CMD__JTAG_TDO			0x2002
+MX23_PAD_SSP1_DETECT__USB_OTG_ID		0x2012
+MX23_PAD_SSP1_DATA0__JTAG_TDI			0x2022
+MX23_PAD_SSP1_DATA1__JTAG_TCLK			0x2032
+MX23_PAD_SSP1_DATA2__JTAG_RTCK			0x2042
+MX23_PAD_SSP1_DATA3__JTAG_TMS			0x2052
+MX23_PAD_SSP1_SCK__JTAG_TRST			0x2062
+MX23_PAD_ROTARYA__SPDIF				0x2072
+MX23_PAD_ROTARYB__GPMI_CE3N			0x2082
+MX23_PAD_GPMI_D00__GPIO_0_0			0x0003
+MX23_PAD_GPMI_D01__GPIO_0_1			0x0013
+MX23_PAD_GPMI_D02__GPIO_0_2			0x0023
+MX23_PAD_GPMI_D03__GPIO_0_3			0x0033
+MX23_PAD_GPMI_D04__GPIO_0_4			0x0043
+MX23_PAD_GPMI_D05__GPIO_0_5			0x0053
+MX23_PAD_GPMI_D06__GPIO_0_6			0x0063
+MX23_PAD_GPMI_D07__GPIO_0_7			0x0073
+MX23_PAD_GPMI_D08__GPIO_0_8			0x0083
+MX23_PAD_GPMI_D09__GPIO_0_9			0x0093
+MX23_PAD_GPMI_D10__GPIO_0_10			0x00a3
+MX23_PAD_GPMI_D11__GPIO_0_11			0x00b3
+MX23_PAD_GPMI_D12__GPIO_0_12			0x00c3
+MX23_PAD_GPMI_D13__GPIO_0_13			0x00d3
+MX23_PAD_GPMI_D14__GPIO_0_14			0x00e3
+MX23_PAD_GPMI_D15__GPIO_0_15			0x00f3
+MX23_PAD_GPMI_CLE__GPIO_0_16			0x0103
+MX23_PAD_GPMI_ALE__GPIO_0_17			0x0113
+MX23_PAD_GPMI_CE2N__GPIO_0_18			0x0123
+MX23_PAD_GPMI_RDY0__GPIO_0_19			0x0133
+MX23_PAD_GPMI_RDY1__GPIO_0_20			0x0143
+MX23_PAD_GPMI_RDY2__GPIO_0_21			0x0153
+MX23_PAD_GPMI_RDY3__GPIO_0_22			0x0163
+MX23_PAD_GPMI_WPN__GPIO_0_23			0x0173
+MX23_PAD_GPMI_WRN__GPIO_0_24			0x0183
+MX23_PAD_GPMI_RDN__GPIO_0_25			0x0193
+MX23_PAD_AUART1_CTS__GPIO_0_26			0x01a3
+MX23_PAD_AUART1_RTS__GPIO_0_27			0x01b3
+MX23_PAD_AUART1_RX__GPIO_0_28			0x01c3
+MX23_PAD_AUART1_TX__GPIO_0_29			0x01d3
+MX23_PAD_I2C_SCL__GPIO_0_30			0x01e3
+MX23_PAD_I2C_SDA__GPIO_0_31			0x01f3
+MX23_PAD_LCD_D00__GPIO_1_0			0x1003
+MX23_PAD_LCD_D01__GPIO_1_1			0x1013
+MX23_PAD_LCD_D02__GPIO_1_2			0x1023
+MX23_PAD_LCD_D03__GPIO_1_3			0x1033
+MX23_PAD_LCD_D04__GPIO_1_4			0x1043
+MX23_PAD_LCD_D05__GPIO_1_5			0x1053
+MX23_PAD_LCD_D06__GPIO_1_6			0x1063
+MX23_PAD_LCD_D07__GPIO_1_7			0x1073
+MX23_PAD_LCD_D08__GPIO_1_8			0x1083
+MX23_PAD_LCD_D09__GPIO_1_9			0x1093
+MX23_PAD_LCD_D10__GPIO_1_10			0x10a3
+MX23_PAD_LCD_D11__GPIO_1_11			0x10b3
+MX23_PAD_LCD_D12__GPIO_1_12			0x10c3
+MX23_PAD_LCD_D13__GPIO_1_13			0x10d3
+MX23_PAD_LCD_D14__GPIO_1_14			0x10e3
+MX23_PAD_LCD_D15__GPIO_1_15			0x10f3
+MX23_PAD_LCD_D16__GPIO_1_16			0x1103
+MX23_PAD_LCD_D17__GPIO_1_17			0x1113
+MX23_PAD_LCD_RESET__GPIO_1_18			0x1123
+MX23_PAD_LCD_RS__GPIO_1_19			0x1133
+MX23_PAD_LCD_WR__GPIO_1_20			0x1143
+MX23_PAD_LCD_CS__GPIO_1_21			0x1153
+MX23_PAD_LCD_DOTCK__GPIO_1_22			0x1163
+MX23_PAD_LCD_ENABLE__GPIO_1_23			0x1173
+MX23_PAD_LCD_HSYNC__GPIO_1_24			0x1183
+MX23_PAD_LCD_VSYNC__GPIO_1_25			0x1193
+MX23_PAD_PWM0__GPIO_1_26			0x11a3
+MX23_PAD_PWM1__GPIO_1_27			0x11b3
+MX23_PAD_PWM2__GPIO_1_28			0x11c3
+MX23_PAD_PWM3__GPIO_1_29			0x11d3
+MX23_PAD_PWM4__GPIO_1_30			0x11e3
+MX23_PAD_SSP1_CMD__GPIO_2_0			0x2003
+MX23_PAD_SSP1_DETECT__GPIO_2_1			0x2013
+MX23_PAD_SSP1_DATA0__GPIO_2_2			0x2023
+MX23_PAD_SSP1_DATA1__GPIO_2_3			0x2033
+MX23_PAD_SSP1_DATA2__GPIO_2_4			0x2043
+MX23_PAD_SSP1_DATA3__GPIO_2_5			0x2053
+MX23_PAD_SSP1_SCK__GPIO_2_6			0x2063
+MX23_PAD_ROTARYA__GPIO_2_7			0x2073
+MX23_PAD_ROTARYB__GPIO_2_8			0x2083
+MX23_PAD_EMI_A00__GPIO_2_9			0x2093
+MX23_PAD_EMI_A01__GPIO_2_10			0x20a3
+MX23_PAD_EMI_A02__GPIO_2_11			0x20b3
+MX23_PAD_EMI_A03__GPIO_2_12			0x20c3
+MX23_PAD_EMI_A04__GPIO_2_13			0x20d3
+MX23_PAD_EMI_A05__GPIO_2_14			0x20e3
+MX23_PAD_EMI_A06__GPIO_2_15			0x20f3
+MX23_PAD_EMI_A07__GPIO_2_16			0x2103
+MX23_PAD_EMI_A08__GPIO_2_17			0x2113
+MX23_PAD_EMI_A09__GPIO_2_18			0x2123
+MX23_PAD_EMI_A10__GPIO_2_19			0x2133
+MX23_PAD_EMI_A11__GPIO_2_20			0x2143
+MX23_PAD_EMI_A12__GPIO_2_21			0x2153
+MX23_PAD_EMI_BA0__GPIO_2_22			0x2163
+MX23_PAD_EMI_BA1__GPIO_2_23			0x2173
+MX23_PAD_EMI_CASN__GPIO_2_24			0x2183
+MX23_PAD_EMI_CE0N__GPIO_2_25			0x2193
+MX23_PAD_EMI_CE1N__GPIO_2_26			0x21a3
+MX23_PAD_GPMI_CE1N__GPIO_2_27			0x21b3
+MX23_PAD_GPMI_CE0N__GPIO_2_28			0x21c3
+MX23_PAD_EMI_CKE__GPIO_2_29			0x21d3
+MX23_PAD_EMI_RASN__GPIO_2_30			0x21e3
+MX23_PAD_EMI_WEN__GPIO_2_31			0x21f3

Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt

@@ -0,0 +1,132 @@
+NVIDIA Tegra20 pinmux controller
+
+Required properties:
+- compatible: "nvidia,tegra20-pinmux"
+- reg: Should contain the register physical address and length for each of
+  the tri-state, mux, pull-up/down, and pad control register sets.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Tegra's pin configuration nodes act as a container for an abitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as pull-up, tristate, drive strength, etc.
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function or tristate parameter. For this
+reason, even seemingly boolean values are actually tristates in this binding:
+unspecified, off, or on. Unspecified is represented as an absent property,
+and off/on are represented as integer values 0 and 1.
+
+Required subnode-properties:
+- nvidia,pins : An array of strings. Each string contains the name of a pin or
+    group. Valid values for these names are listed below.
+
+Optional subnode-properties:
+- nvidia,function: A string containing the name of the function to mux to the
+  pin or group. Valid values for function names are listed below. See the Tegra
+  TRM to determine which are valid for each pin or group.
+- nvidia,pull: Integer, representing the pull-down/up to apply to the pin.
+    0: none, 1: down, 2: up.
+- nvidia,tristate: Integer.
+    0: drive, 1: tristate.
+- nvidia,high-speed-mode: Integer. Enable high speed mode the pins.
+    0: no, 1: yes.
+- nvidia,schmitt: Integer. Enables Schmitt Trigger on the input.
+    0: no, 1: yes.
+- nvidia,low-power-mode: Integer. Valid values 0-3. 0 is least power, 3 is
+    most power. Controls the drive power or current. See "Low Power Mode"
+    or "LPMD1" and "LPMD0" in the Tegra TRM.
+- nvidia,pull-down-strength: Integer. Controls drive strength. 0 is weakest.
+    The range of valid values depends on the pingroup. See "CAL_DRVDN" in the
+    Tegra TRM.
+- nvidia,pull-up-strength: Integer. Controls drive strength. 0 is weakest.
+    The range of valid values depends on the pingroup. See "CAL_DRVUP" in the
+    Tegra TRM.
+- nvidia,slew-rate-rising: Integer. Controls rising signal slew rate. 0 is
+    fastest. The range of valid values depends on the pingroup. See
+    "DRVDN_SLWR" in the Tegra TRM.
+- nvidia,slew-rate-falling: Integer. Controls falling signal slew rate. 0 is
+    fastest. The range of valid values depends on the pingroup. See
+    "DRVUP_SLWF" in the Tegra TRM.
+
+Note that many of these properties are only valid for certain specific pins
+or groups. See the Tegra TRM and various pinmux spreadsheets for complete
+details regarding which groups support which functionality. The Linux pinctrl
+driver may also be a useful reference, since it consolidates, disambiguates,
+and corrects data from all those sources.
+
+Valid values for pin and group names are:
+
+  mux groups:
+
+    These all support nvidia,function, nvidia,tristate, and many support
+    nvidia,pull.
+
+    ata, atb, atc, atd, ate, cdev1, cdev2, crtp, csus, dap1, dap2, dap3, dap4,
+    ddc, dta, dtb, dtc, dtd, dte, dtf, gma, gmb, gmc, gmd, gme, gpu, gpu7,
+    gpv, hdint, i2cp, irrx, irtx, kbca, kbcb, kbcc, kbcd, kbce, kbcf, lcsn,
+    ld0, ld1, ld2, ld3, ld4, ld5, ld6, ld7, ld8, ld9, ld10, ld11, ld12, ld13,
+    ld14, ld15, ld16, ld17, ldc, ldi, lhp0, lhp1, lhp2, lhs, lm0, lm1, lpp,
+    lpw0, lpw1, lpw2, lsc0, lsc1, lsck, lsda, lsdi, lspi, lvp0, lvp1, lvs,
+    owc, pmc, pta, rm, sdb, sdc, sdd, sdio1, slxa, slxc, slxd, slxk, spdi,
+    spdo, spia, spib, spic, spid, spie, spif, spig, spih, uaa, uab, uac, uad,
+    uca, ucb, uda.
+
+  tristate groups:
+
+    These only support nvidia,pull.
+
+    ck32, ddrc, pmca, pmcb, pmcc, pmcd, pmce, xm2c, xm2d, ls, lc, ld17_0,
+    ld19_18, ld21_20, ld23_22.
+
+  drive groups:
+
+    With some exceptions, these support nvidia,high-speed-mode,
+    nvidia,schmitt, nvidia,low-power-mode, nvidia,pull-down-strength,
+    nvidia,pull-up-strength, nvidia,slew_rate-rising, nvidia,slew_rate-falling.
+
+    drive_ao1, drive_ao2, drive_at1, drive_at2, drive_cdev1, drive_cdev2,
+    drive_csus, drive_dap1, drive_dap2, drive_dap3, drive_dap4, drive_dbg,
+    drive_lcd1, drive_lcd2, drive_sdmmc2, drive_sdmmc3, drive_spi, drive_uaa,
+    drive_uab, drive_uart2, drive_uart3, drive_vi1, drive_vi2, drive_xm2a,
+    drive_xm2c, drive_xm2d, drive_xm2clk, drive_sdio1, drive_crt, drive_ddc,
+    drive_gma, drive_gmb, drive_gmc, drive_gmd, drive_gme, drive_owr,
+    drive_uda.
+
+Example:
+
+	pinctrl@70000000 {
+		compatible = "nvidia,tegra20-pinmux";
+		reg = < 0x70000014 0x10    /* Tri-state registers */
+			0x70000080 0x20    /* Mux registers */
+			0x700000a0 0x14    /* Pull-up/down registers */
+			0x70000868 0xa8 >; /* Pad control registers */
+	};
+
+Example board file extract:
+
+	pinctrl@70000000 {
+		sdio4_default: sdio4_default {
+			atb {
+				nvidia,pins = "atb", "gma", "gme";
+				nvidia,function = "sdio4";
+				nvidia,pull = <0>;
+				nvidia,tristate = <0>;
+			};
+		};
+	};
+
+	sdhci@c8000600 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdio4_default>;
+	};

Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.txt

@@ -0,0 +1,132 @@
+NVIDIA Tegra30 pinmux controller
+
+The Tegra30 pinctrl binding is very similar to the Tegra20 pinctrl binding,
+as described in nvidia,tegra20-pinmux.txt. In fact, this document assumes
+that binding as a baseline, and only documents the differences between the
+two bindings.
+
+Required properties:
+- compatible: "nvidia,tegra30-pinmux"
+- reg: Should contain the register physical address and length for each of
+  the pad control and mux registers.
+
+Tegra30 adds the following optional properties for pin configuration subnodes:
+- nvidia,enable-input: Integer. Enable the pin's input path. 0: no, 1: yes.
+- nvidia,open-drain: Integer. Enable open drain mode. 0: no, 1: yes.
+- nvidia,lock: Integer. Lock the pin configuration against further changes
+    until reset. 0: no, 1: yes.
+- nvidia,io-reset: Integer. Reset the IO path. 0: no, 1: yes.
+
+As with Tegra20, see the Tegra TRM for complete details regarding which groups
+support which functionality.
+
+Valid values for pin and group names are:
+
+  per-pin mux groups:
+
+    These all support nvidia,function, nvidia,tristate, nvidia,pull,
+    nvidia,enable-input, nvidia,lock. Some support nvidia,open-drain,
+    nvidia,io-reset.
+
+    clk_32k_out_pa0, uart3_cts_n_pa1, dap2_fs_pa2, dap2_sclk_pa3,
+    dap2_din_pa4, dap2_dout_pa5, sdmmc3_clk_pa6, sdmmc3_cmd_pa7, gmi_a17_pb0,
+    gmi_a18_pb1, lcd_pwr0_pb2, lcd_pclk_pb3, sdmmc3_dat3_pb4, sdmmc3_dat2_pb5,
+    sdmmc3_dat1_pb6, sdmmc3_dat0_pb7, uart3_rts_n_pc0, lcd_pwr1_pc1,
+    uart2_txd_pc2, uart2_rxd_pc3, gen1_i2c_scl_pc4, gen1_i2c_sda_pc5,
+    lcd_pwr2_pc6, gmi_wp_n_pc7, sdmmc3_dat5_pd0, sdmmc3_dat4_pd1, lcd_dc1_pd2,
+    sdmmc3_dat6_pd3, sdmmc3_dat7_pd4, vi_d1_pd5, vi_vsync_pd6, vi_hsync_pd7,
+    lcd_d0_pe0, lcd_d1_pe1, lcd_d2_pe2, lcd_d3_pe3, lcd_d4_pe4, lcd_d5_pe5,
+    lcd_d6_pe6, lcd_d7_pe7, lcd_d8_pf0, lcd_d9_pf1, lcd_d10_pf2, lcd_d11_pf3,
+    lcd_d12_pf4, lcd_d13_pf5, lcd_d14_pf6, lcd_d15_pf7, gmi_ad0_pg0,
+    gmi_ad1_pg1, gmi_ad2_pg2, gmi_ad3_pg3, gmi_ad4_pg4, gmi_ad5_pg5,
+    gmi_ad6_pg6, gmi_ad7_pg7, gmi_ad8_ph0, gmi_ad9_ph1, gmi_ad10_ph2,
+    gmi_ad11_ph3, gmi_ad12_ph4, gmi_ad13_ph5, gmi_ad14_ph6, gmi_ad15_ph7,
+    gmi_wr_n_pi0, gmi_oe_n_pi1, gmi_dqs_pi2, gmi_cs6_n_pi3, gmi_rst_n_pi4,
+    gmi_iordy_pi5, gmi_cs7_n_pi6, gmi_wait_pi7, gmi_cs0_n_pj0, lcd_de_pj1,
+    gmi_cs1_n_pj2, lcd_hsync_pj3, lcd_vsync_pj4, uart2_cts_n_pj5,
+    uart2_rts_n_pj6, gmi_a16_pj7, gmi_adv_n_pk0, gmi_clk_pk1, gmi_cs4_n_pk2,
+    gmi_cs2_n_pk3, gmi_cs3_n_pk4, spdif_out_pk5, spdif_in_pk6, gmi_a19_pk7,
+    vi_d2_pl0, vi_d3_pl1, vi_d4_pl2, vi_d5_pl3, vi_d6_pl4, vi_d7_pl5,
+    vi_d8_pl6, vi_d9_pl7, lcd_d16_pm0, lcd_d17_pm1, lcd_d18_pm2, lcd_d19_pm3,
+    lcd_d20_pm4, lcd_d21_pm5, lcd_d22_pm6, lcd_d23_pm7, dap1_fs_pn0,
+    dap1_din_pn1, dap1_dout_pn2, dap1_sclk_pn3, lcd_cs0_n_pn4, lcd_sdout_pn5,
+    lcd_dc0_pn6, hdmi_int_pn7, ulpi_data7_po0, ulpi_data0_po1, ulpi_data1_po2,
+    ulpi_data2_po3, ulpi_data3_po4, ulpi_data4_po5, ulpi_data5_po6,
+    ulpi_data6_po7, dap3_fs_pp0, dap3_din_pp1, dap3_dout_pp2, dap3_sclk_pp3,
+    dap4_fs_pp4, dap4_din_pp5, dap4_dout_pp6, dap4_sclk_pp7, kb_col0_pq0,
+    kb_col1_pq1, kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5,
+    kb_col6_pq6, kb_col7_pq7, kb_row0_pr0, kb_row1_pr1, kb_row2_pr2,
+    kb_row3_pr3, kb_row4_pr4, kb_row5_pr5, kb_row6_pr6, kb_row7_pr7,
+    kb_row8_ps0, kb_row9_ps1, kb_row10_ps2, kb_row11_ps3, kb_row12_ps4,
+    kb_row13_ps5, kb_row14_ps6, kb_row15_ps7, vi_pclk_pt0, vi_mclk_pt1,
+    vi_d10_pt2, vi_d11_pt3, vi_d0_pt4, gen2_i2c_scl_pt5, gen2_i2c_sda_pt6,
+    sdmmc4_cmd_pt7, pu0, pu1, pu2, pu3, pu4, pu5, pu6, jtag_rtck_pu7, pv0,
+    pv1, pv2, pv3, ddc_scl_pv4, ddc_sda_pv5, crt_hsync_pv6, crt_vsync_pv7,
+    lcd_cs1_n_pw0, lcd_m1_pw1, spi2_cs1_n_pw2, spi2_cs2_n_pw3, clk1_out_pw4,
+    clk2_out_pw5, uart3_txd_pw6, uart3_rxd_pw7, spi2_mosi_px0, spi2_miso_px1,
+    spi2_sck_px2, spi2_cs0_n_px3, spi1_mosi_px4, spi1_sck_px5, spi1_cs0_n_px6,
+    spi1_miso_px7, ulpi_clk_py0, ulpi_dir_py1, ulpi_nxt_py2, ulpi_stp_py3,
+    sdmmc1_dat3_py4, sdmmc1_dat2_py5, sdmmc1_dat1_py6, sdmmc1_dat0_py7,
+    sdmmc1_clk_pz0, sdmmc1_cmd_pz1, lcd_sdin_pz2, lcd_wr_n_pz3, lcd_sck_pz4,
+    sys_clk_req_pz5, pwr_i2c_scl_pz6, pwr_i2c_sda_pz7, sdmmc4_dat0_paa0,
+    sdmmc4_dat1_paa1, sdmmc4_dat2_paa2, sdmmc4_dat3_paa3, sdmmc4_dat4_paa4,
+    sdmmc4_dat5_paa5, sdmmc4_dat6_paa6, sdmmc4_dat7_paa7, pbb0,
+    cam_i2c_scl_pbb1, cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6, pbb7,
+    cam_mclk_pcc0, pcc1, pcc2, sdmmc4_rst_n_pcc3, sdmmc4_clk_pcc4,
+    clk2_req_pcc5, pex_l2_rst_n_pcc6, pex_l2_clkreq_n_pcc7,
+    pex_l0_prsnt_n_pdd0, pex_l0_rst_n_pdd1, pex_l0_clkreq_n_pdd2,
+    pex_wake_n_pdd3, pex_l1_prsnt_n_pdd4, pex_l1_rst_n_pdd5,
+    pex_l1_clkreq_n_pdd6, pex_l2_prsnt_n_pdd7, clk3_out_pee0, clk3_req_pee1,
+    clk1_req_pee2, hdmi_cec_pee3, clk_32k_in, core_pwr_req, cpu_pwr_req, owr,
+    pwr_int_n.
+
+  drive groups:
+
+    These all support nvidia,pull-down-strength, nvidia,pull-up-strength,
+    nvidia,slew_rate-rising, nvidia,slew_rate-falling. Most but not all
+    support nvidia,high-speed-mode, nvidia,schmitt, nvidia,low-power-mode.
+
+    ao1, ao2, at1, at2, at3, at4, at5, cdev1, cdev2, cec, crt, csus, dap1,
+    dap2, dap3, dap4, dbg, ddc, dev3, gma, gmb, gmc, gmd, gme, gmf, gmg,
+    gmh, gpv, lcd1, lcd2, owr, sdio1, sdio2, sdio3, spi, uaa, uab, uart2,
+    uart3, uda, vi1.
+
+Example:
+
+	pinctrl@70000000 {
+		compatible = "nvidia,tegra30-pinmux";
+		reg = < 0x70000868 0xd0     /* Pad control registers */
+			0x70003000 0x3e0 >; /* Mux registers */
+	};
+
+Example board file extract:
+
+	pinctrl@70000000 {
+		sdmmc4_default: pinmux {
+			sdmmc4_clk_pcc4 {
+				nvidia,pins =	"sdmmc4_clk_pcc4",
+						"sdmmc4_rst_n_pcc3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <0>;
+				nvidia,tristate = <0>;
+			};
+			sdmmc4_dat0_paa0 {
+				nvidia,pins =	"sdmmc4_dat0_paa0",
+						"sdmmc4_dat1_paa1",
+						"sdmmc4_dat2_paa2",
+						"sdmmc4_dat3_paa3",
+						"sdmmc4_dat4_paa4",
+						"sdmmc4_dat5_paa5",
+						"sdmmc4_dat6_paa6",
+						"sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <2>;
+				nvidia,tristate = <0>;
+			};
+		};
+	};
+
+	sdhci@78000400 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc4_default>;
+	};

Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt

@@ -0,0 +1,128 @@
+== Introduction ==
+
+Hardware modules that control pin multiplexing or configuration parameters
+such as pull-up/down, tri-state, drive-strength etc are designated as pin
+controllers. Each pin controller must be represented as a node in device tree,
+just like any other hardware module.
+
+Hardware modules whose signals are affected by pin configuration are
+designated client devices. Again, each client device must be represented as a
+node in device tree, just like any other hardware module.
+
+For a client device to operate correctly, certain pin controllers must
+set up certain specific pin configurations. Some client devices need a
+single static pin configuration, e.g. set up during initialization. Others
+need to reconfigure pins at run-time, for example to tri-state pins when the
+device is inactive. Hence, each client device can define a set of named
+states. The number and names of those states is defined by the client device's
+own binding.
+
+The common pinctrl bindings defined in this file provide an infrastructure
+for client device device tree nodes to map those state names to the pin
+configuration used by those states.
+
+Note that pin controllers themselves may also be client devices of themselves.
+For example, a pin controller may set up its own "active" state when the
+driver loads. This would allow representing a board's static pin configuration
+in a single place, rather than splitting it across multiple client device
+nodes. The decision to do this or not somewhat rests with the author of
+individual board device tree files, and any requirements imposed by the
+bindings for the individual client devices in use by that board, i.e. whether
+they require certain specific named states for dynamic pin configuration.
+
+== Pinctrl client devices ==
+
+For each client device individually, every pin state is assigned an integer
+ID. These numbers start at 0, and are contiguous. For each state ID, a unique
+property exists to define the pin configuration. Each state may also be
+assigned a name. When names are used, another property exists to map from
+those names to the integer IDs.
+
+Each client device's own binding determines the set of states the must be
+defined in its device tree node, and whether to define the set of state
+IDs that must be provided, or whether to define the set of state names that
+must be provided.
+
+Required properties:
+pinctrl-0:	List of phandles, each pointing at a pin configuration
+		node. These referenced pin configuration nodes must be child
+		nodes of the pin controller that they configure. Multiple
+		entries may exist in this list so that multiple pin
+		controllers may be configured, or so that a state may be built
+		from multiple nodes for a single pin controller, each
+		contributing part of the overall configuration. See the next
+		section of this document for details of the format of these
+		pin configuration nodes.
+
+		In some cases, it may be useful to define a state, but for it
+		to be empty. This may be required when a common IP block is
+		used in an SoC either without a pin controller, or where the
+		pin controller does not affect the HW module in question. If
+		the binding for that IP block requires certain pin states to
+		exist, they must still be defined, but may be left empty.
+
+Optional properties:
+pinctrl-1:	List of phandles, each pointing at a pin configuration
+		node within a pin controller.
+...
+pinctrl-n:	List of phandles, each pointing at a pin configuration
+		node within a pin controller.
+pinctrl-names:	The list of names to assign states. List entry 0 defines the
+		name for integer state ID 0, list entry 1 for state ID 1, and
+		so on.
+
+For example:
+
+	/* For a client device requiring named states */
+	device {
+		pinctrl-names = "active", "idle";
+		pinctrl-0 = <&state_0_node_a>;
+		pinctrl-1 = <&state_1_node_a &state_1_node_b>;
+	};
+
+	/* For the same device if using state IDs */
+	device {
+		pinctrl-0 = <&state_0_node_a>;
+		pinctrl-1 = <&state_1_node_a &state_1_node_b>;
+	};
+
+	/*
+	 * For an IP block whose binding supports pin configuration,
+	 * but in use on an SoC that doesn't have any pin control hardware
+	 */
+	device {
+		pinctrl-names = "active", "idle";
+		pinctrl-0 = <>;
+		pinctrl-1 = <>;
+	};
+
+== Pin controller devices ==
+
+Pin controller devices should contain the pin configuration nodes that client
+devices reference.
+
+For example:
+
+	pincontroller {
+		... /* Standard DT properties for the device itself elided */
+
+		state_0_node_a {
+			...
+		};
+		state_1_node_a {
+			...
+		};
+		state_1_node_b {
+			...
+		};
+	}
+
+The contents of each of those pin configuration child nodes is defined
+entirely by the binding for the individual pin controller device. There
+exists no common standard for this content.
+
+The pin configuration nodes need not be direct children of the pin controller
+device; they may be grandchildren, for example. Whether this is legal, and
+whether there is any interaction between the child and intermediate parent
+nodes, is again defined entirely by the binding for the individual pin
+controller device.

Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt

@@ -0,0 +1,155 @@
+ST Microelectronics, SPEAr pinmux controller
+
+Required properties:
+- compatible	: "st,spear300-pinmux"
+		: "st,spear310-pinmux"
+		: "st,spear320-pinmux"
+		: "st,spear1310-pinmux"
+		: "st,spear1340-pinmux"
+- reg		: Address range of the pinctrl registers
+- st,pinmux-mode: Mandatory for SPEAr300 and SPEAr320 and invalid for others.
+	- Its values for SPEAr300:
+		- NAND_MODE		: <0>
+		- NOR_MODE		: <1>
+		- PHOTO_FRAME_MODE	: <2>
+		- LEND_IP_PHONE_MODE	: <3>
+		- HEND_IP_PHONE_MODE	: <4>
+		- LEND_WIFI_PHONE_MODE	: <5>
+		- HEND_WIFI_PHONE_MODE	: <6>
+		- ATA_PABX_WI2S_MODE	: <7>
+		- ATA_PABX_I2S_MODE	: <8>
+		- CAML_LCDW_MODE	: <9>
+		- CAMU_LCD_MODE		: <10>
+		- CAMU_WLCD_MODE	: <11>
+		- CAML_LCD_MODE		: <12>
+	- Its values for SPEAr320:
+		- AUTO_NET_SMII_MODE	: <0>
+		- AUTO_NET_MII_MODE	: <1>
+		- AUTO_EXP_MODE		: <2>
+		- SMALL_PRINTERS_MODE	: <3>
+		- EXTENDED_MODE		: <4>
+
+Please refer to pinctrl-bindings.txt in this directory for details of the common
+pinctrl bindings used by client devices.
+
+SPEAr's pinmux nodes act as a container for an abitrary number of subnodes. Each
+of these subnodes represents muxing for a pin, a group, or a list of pins or
+groups.
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Required subnode-properties:
+- st,pins : An array of strings. Each string contains the name of a pin or
+  group.
+- st,function: A string containing the name of the function to mux to the pin or
+  group. See the SPEAr's TRM to determine which are valid for each pin or group.
+
+  Valid values for group and function names can be found from looking at the
+  group and function arrays in driver files:
+  drivers/pinctrl/spear/pinctrl-spear3*0.c
+
+Valid values for group names are:
+For All SPEAr3xx machines:
+	"firda_grp", "i2c0_grp", "ssp_cs_grp", "ssp0_grp", "mii0_grp",
+	"gpio0_pin0_grp", "gpio0_pin1_grp", "gpio0_pin2_grp", "gpio0_pin3_grp",
+	"gpio0_pin4_grp", "gpio0_pin5_grp", "uart0_ext_grp", "uart0_grp",
+	"timer_0_1_grp", timer_0_1_pins, "timer_2_3_grp"
+
+For SPEAr300 machines:
+	"fsmc_2chips_grp", "fsmc_4chips_grp", "clcd_lcdmode_grp",
+	"clcd_pfmode_grp", "tdm_grp", "i2c_clk_grp_grp", "caml_grp", "camu_grp",
+	"dac_grp", "i2s_grp", "sdhci_4bit_grp", "sdhci_8bit_grp",
+	"gpio1_0_to_3_grp", "gpio1_4_to_7_grp"
+
+For SPEAr310 machines:
+	"emi_cs_0_to_5_grp", "uart1_grp", "uart2_grp", "uart3_grp", "uart4_grp",
+	"uart5_grp", "fsmc_grp", "rs485_0_grp", "rs485_1_grp", "tdm_grp"
+
+For SPEAr320 machines:
+	"clcd_grp", "emi_grp", "fsmc_8bit_grp", "fsmc_16bit_grp", "spp_grp",
+	"sdhci_led_grp", "sdhci_cd_12_grp", "sdhci_cd_51_grp", "i2s_grp",
+	"uart1_grp", "uart1_modem_2_to_7_grp", "uart1_modem_31_to_36_grp",
+	"uart1_modem_34_to_45_grp", "uart1_modem_80_to_85_grp", "uart2_grp",
+	"uart3_8_9_grp", "uart3_15_16_grp", "uart3_41_42_grp",
+	"uart3_52_53_grp", "uart3_73_74_grp", "uart3_94_95_grp",
+	"uart3_98_99_grp", "uart4_6_7_grp", "uart4_13_14_grp",
+	"uart4_39_40_grp", "uart4_71_72_grp", "uart4_92_93_grp",
+	"uart4_100_101_grp", "uart5_4_5_grp", "uart5_37_38_grp",
+	"uart5_69_70_grp", "uart5_90_91_grp", "uart6_2_3_grp",
+	"uart6_88_89_grp", "rs485_grp", "touchscreen_grp", "can0_grp",
+	"can1_grp", "pwm0_1_pin_8_9_grp", "pwm0_1_pin_14_15_grp",
+	"pwm0_1_pin_30_31_grp", "pwm0_1_pin_37_38_grp", "pwm0_1_pin_42_43_grp",
+	"pwm0_1_pin_59_60_grp", "pwm0_1_pin_88_89_grp", "pwm2_pin_7_grp",
+	"pwm2_pin_13_grp", "pwm2_pin_29_grp", "pwm2_pin_34_grp",
+	"pwm2_pin_41_grp", "pwm2_pin_58_grp", "pwm2_pin_87_grp",
+	"pwm3_pin_6_grp", "pwm3_pin_12_grp", "pwm3_pin_28_grp",
+	"pwm3_pin_40_grp", "pwm3_pin_57_grp", "pwm3_pin_86_grp",
+	"ssp1_17_20_grp", "ssp1_36_39_grp", "ssp1_48_51_grp", "ssp1_65_68_grp",
+	"ssp1_94_97_grp", "ssp2_13_16_grp", "ssp2_32_35_grp", "ssp2_44_47_grp",
+	"ssp2_61_64_grp", "ssp2_90_93_grp", "mii2_grp", "smii0_1_grp",
+	"rmii0_1_grp", "i2c1_8_9_grp", "i2c1_98_99_grp", "i2c2_0_1_grp",
+	"i2c2_2_3_grp", "i2c2_19_20_grp", "i2c2_75_76_grp", "i2c2_96_97_grp"
+
+For SPEAr1310 machines:
+	"i2c0_grp", "ssp0_grp", "ssp0_cs0_grp", "ssp0_cs1_2_grp", "i2s0_grp",
+	"i2s1_grp", "clcd_grp", "clcd_high_res_grp", "arm_gpio_grp",
+	"smi_2_chips_grp", "smi_4_chips_grp", "gmii_grp", "rgmii_grp",
+	"smii_0_1_2_grp", "ras_mii_txclk_grp", "nand_8bit_grp",
+	"nand_16bit_grp", "nand_4_chips_grp", "keyboard_6x6_grp",
+	"keyboard_rowcol6_8_grp", "uart0_grp", "uart0_modem_grp",
+	"gpt0_tmr0_grp", "gpt0_tmr1_grp", "gpt1_tmr0_grp", "gpt1_tmr1_grp",
+	"sdhci_grp", "cf_grp", "xd_grp", "touch_xy_grp",
+	"uart1_disable_i2c_grp", "uart1_disable_sd_grp", "uart2_3_grp",
+	"uart4_grp", "uart5_grp", "rs485_0_1_tdm_0_1_grp", "i2c_1_2_grp",
+	"i2c3_dis_smi_clcd_grp", "i2c3_dis_sd_i2s0_grp", "i2c_4_5_dis_smi_grp",
+	"i2c4_dis_sd_grp", "i2c5_dis_sd_grp", "i2c_6_7_dis_kbd_grp",
+	"i2c6_dis_sd_grp", "i2c7_dis_sd_grp", "can0_dis_nor_grp",
+	"can0_dis_sd_grp", "can1_dis_sd_grp", "can1_dis_kbd_grp", "pcie0_grp",
+	"pcie1_grp", "pcie2_grp", "sata0_grp", "sata1_grp", "sata2_grp",
+	"ssp1_dis_kbd_grp", "ssp1_dis_sd_grp", "gpt64_grp"
+
+For SPEAr1340 machines:
+	"pads_as_gpio_grp", "fsmc_8bit_grp", "fsmc_16bit_grp", "fsmc_pnor_grp",
+	"keyboard_row_col_grp", "keyboard_col5_grp", "spdif_in_grp",
+	"spdif_out_grp", "gpt_0_1_grp", "pwm0_grp", "pwm1_grp", "pwm2_grp",
+	"pwm3_grp", "vip_mux_grp", "vip_mux_cam0_grp", "vip_mux_cam1_grp",
+	"vip_mux_cam2_grp", "vip_mux_cam3_grp", "cam0_grp", "cam1_grp",
+	"cam2_grp", "cam3_grp", "smi_grp", "ssp0_grp", "ssp0_cs1_grp",
+	"ssp0_cs2_grp", "ssp0_cs3_grp", "uart0_grp", "uart0_enh_grp",
+	"uart1_grp", "i2s_in_grp", "i2s_out_grp", "gmii_grp", "rgmii_grp",
+	"rmii_grp", "sgmii_grp", "i2c0_grp", "i2c1_grp", "cec0_grp", "cec1_grp",
+	"sdhci_grp", "cf_grp", "xd_grp", "clcd_grp", "arm_trace_grp",
+	"miphy_dbg_grp", "pcie_grp", "sata_grp"
+
+Valid values for function names are:
+For All SPEAr3xx machines:
+	"firda", "i2c0", "ssp_cs", "ssp0", "mii0", "gpio0", "uart0_ext",
+	"uart0", "timer_0_1", "timer_2_3"
+
+For SPEAr300 machines:
+	"fsmc", "clcd", "tdm", "i2c1", "cam", "dac", "i2s", "sdhci", "gpio1"
+
+For SPEAr310 machines:
+	"emi", "uart1", "uart2", "uart3", "uart4", "uart5", "fsmc", "rs485_0",
+	"rs485_1", "tdm"
+
+For SPEAr320 machines:
+	"clcd", "emi", "fsmc", "spp", "sdhci", "i2s", "uart1", "uart1_modem",
+	"uart2", "uart3", "uart4", "uart5", "uart6", "rs485", "touchscreen",
+	"can0", "can1", "pwm0_1", "pwm2", "pwm3", "ssp1", "ssp2", "mii2",
+	"mii0_1", "i2c1", "i2c2"
+
+
+For SPEAr1310 machines:
+	"i2c0", "ssp0", "i2s0", "i2s1", "clcd", "arm_gpio", "smi", "gmii",
+	"rgmii", "smii_0_1_2", "ras_mii_txclk", "nand", "keyboard", "uart0",
+	"gpt0", "gpt1", "sdhci", "cf", "xd", "touchscreen", "uart1", "uart2_3",
+	"uart4", "uart5", "rs485_0_1_tdm_0_1", "i2c_1_2", "i2c3_i2s1",
+	"i2c_4_5", "i2c_6_7", "can0", "can1", "pci", "sata", "ssp1", "gpt64"
+
+For SPEAr1340 machines:
+	"pads_as_gpio", "fsmc", "keyboard", "spdif_in", "spdif_out", "gpt_0_1",
+	"pwm", "vip", "cam0", "cam1", "cam2", "cam3", "smi", "ssp0", "uart0",
+	"uart1", "i2s", "gmac", "i2c0", "i2c1", "cec0", "cec1", "sdhci", "cf",
+	"xd", "clcd", "arm_trace", "miphy_dbg", "pcie", "sata"

Documentation/devicetree/bindings/pinmux/pinmux_nvidia.txt

@@ -1,5 +0,0 @@
-NVIDIA Tegra 2 pinmux controller
-
-Required properties:
-- compatible : "nvidia,tegra20-pinmux"
-

Documentation/driver-model/devres.txt

@@ -276,3 +276,11 @@ REGULATOR
   devm_regulator_get()
   devm_regulator_put()
   devm_regulator_bulk_get()
+
+CLOCK
+  devm_clk_get()
+  devm_clk_put()
+
+PINCTRL
+  devm_pinctrl_get()
+  devm_pinctrl_put()

Documentation/pinctrl.txt

@@ -152,11 +152,9 @@ static const struct foo_group foo_groups[] = {
 };
 
 
-static int foo_list_groups(struct pinctrl_dev *pctldev, unsigned selector)
+static int foo_get_groups_count(struct pinctrl_dev *pctldev)
 {
-	if (selector >= ARRAY_SIZE(foo_groups))
-		return -EINVAL;
-	return 0;
+	return ARRAY_SIZE(foo_groups);
 }
 
 static const char *foo_get_group_name(struct pinctrl_dev *pctldev,
@@ -175,7 +173,7 @@ static int foo_get_group_pins(struct pinctrl_dev *pctldev, unsigned selector,
 }
 
 static struct pinctrl_ops foo_pctrl_ops = {
-	.list_groups = foo_list_groups,
+	.get_groups_count = foo_get_groups_count,
 	.get_group_name = foo_get_group_name,
 	.get_group_pins = foo_get_group_pins,
 };
@@ -186,13 +184,12 @@ static struct pinctrl_desc foo_desc = {
        .pctlops = &foo_pctrl_ops,
 };
 
-The pin control subsystem will call the .list_groups() function repeatedly
-beginning on 0 until it returns non-zero to determine legal selectors, then
-it will call the other functions to retrieve the name and pins of the group.
-Maintaining the data structure of the groups is up to the driver, this is
-just a simple example - in practice you may need more entries in your group
-structure, for example specific register ranges associated with each group
-and so on.
+The pin control subsystem will call the .get_groups_count() function to
+determine total number of legal selectors, then it will call the other functions
+to retrieve the name and pins of the group. Maintaining the data structure of
+the groups is up to the driver, this is just a simple example - in practice you
+may need more entries in your group structure, for example specific register
+ranges associated with each group and so on.
 
 
 Pin configuration
@@ -606,11 +603,9 @@ static const struct foo_group foo_groups[] = {
 };
 
 
-static int foo_list_groups(struct pinctrl_dev *pctldev, unsigned selector)
+static int foo_get_groups_count(struct pinctrl_dev *pctldev)
 {
-	if (selector >= ARRAY_SIZE(foo_groups))
-		return -EINVAL;
-	return 0;
+	return ARRAY_SIZE(foo_groups);
 }
 
 static const char *foo_get_group_name(struct pinctrl_dev *pctldev,
@@ -629,7 +624,7 @@ static int foo_get_group_pins(struct pinctrl_dev *pctldev, unsigned selector,
 }
 
 static struct pinctrl_ops foo_pctrl_ops = {
-	.list_groups = foo_list_groups,
+	.get_groups_count = foo_get_groups_count,
 	.get_group_name = foo_get_group_name,
 	.get_group_pins = foo_get_group_pins,
 };
@@ -640,7 +635,7 @@ struct foo_pmx_func {
 	const unsigned num_groups;
 };
 
-static const char * const spi0_groups[] = { "spi0_1_grp" };
+static const char * const spi0_groups[] = { "spi0_0_grp", "spi0_1_grp" };
 static const char * const i2c0_groups[] = { "i2c0_grp" };
 static const char * const mmc0_groups[] = { "mmc0_1_grp", "mmc0_2_grp",
 					"mmc0_3_grp" };
@@ -663,11 +658,9 @@ static const struct foo_pmx_func foo_functions[] = {
 	},
 };
 
-int foo_list_funcs(struct pinctrl_dev *pctldev, unsigned selector)
+int foo_get_functions_count(struct pinctrl_dev *pctldev)
 {
-	if (selector >= ARRAY_SIZE(foo_functions))
-		return -EINVAL;
-	return 0;
+	return ARRAY_SIZE(foo_functions);
 }
 
 const char *foo_get_fname(struct pinctrl_dev *pctldev, unsigned selector)
@@ -703,7 +696,7 @@ void foo_disable(struct pinctrl_dev *pctldev, unsigned selector,
 }
 
 struct pinmux_ops foo_pmxops = {
-	.list_functions = foo_list_funcs,
+	.get_functions_count = foo_get_functions_count,
 	.get_function_name = foo_get_fname,
 	.get_function_groups = foo_get_groups,
 	.enable = foo_enable,
@@ -786,7 +779,7 @@ and spi on the second function mapping:
 
 #include <linux/pinctrl/machine.h>
 
-static const struct pinctrl_map __initdata mapping[] = {
+static const struct pinctrl_map mapping[] __initconst = {
 	{
 		.dev_name = "foo-spi.0",
 		.name = PINCTRL_STATE_DEFAULT,
@@ -952,13 +945,13 @@ case), we define a mapping like this:
 The result of grabbing this mapping from the device with something like
 this (see next paragraph):
 
-	p = pinctrl_get(dev);
+	p = devm_pinctrl_get(dev);
 	s = pinctrl_lookup_state(p, "8bit");
 	ret = pinctrl_select_state(p, s);
 
 or more simply:
 
-	p = pinctrl_get_select(dev, "8bit");
+	p = devm_pinctrl_get_select(dev, "8bit");
 
 Will be that you activate all the three bottom records in the mapping at
 once. Since they share the same name, pin controller device, function and
@@ -992,7 +985,7 @@ foo_probe()
 	/* Allocate a state holder named "foo" etc */
 	struct foo_state *foo = ...;
 
-	foo->p = pinctrl_get(&device);
+	foo->p = devm_pinctrl_get(&device);
 	if (IS_ERR(foo->p)) {
 		/* FIXME: clean up "foo" here */
 		return PTR_ERR(foo->p);
@@ -1000,24 +993,17 @@ foo_probe()
 
 	foo->s = pinctrl_lookup_state(foo->p, PINCTRL_STATE_DEFAULT);
 	if (IS_ERR(foo->s)) {
-		pinctrl_put(foo->p);
 		/* FIXME: clean up "foo" here */
 		return PTR_ERR(s);
 	}
 
 	ret = pinctrl_select_state(foo->s);
 	if (ret < 0) {
-		pinctrl_put(foo->p);
 		/* FIXME: clean up "foo" here */
 		return ret;
 	}
 }
 
-foo_remove()
-{
-	pinctrl_put(state->p);
-}
-
 This get/lookup/select/put sequence can just as well be handled by bus drivers
 if you don't want each and every driver to handle it and you know the
 arrangement on your bus.
@@ -1029,6 +1015,11 @@ The semantics of the pinctrl APIs are:
   kernel memory to hold the pinmux state. All mapping table parsing or similar
   slow operations take place within this API.
 
+- devm_pinctrl_get() is a variant of pinctrl_get() that causes pinctrl_put()
+  to be called automatically on the retrieved pointer when the associated
+  device is removed. It is recommended to use this function over plain
+  pinctrl_get().
+
 - pinctrl_lookup_state() is called in process context to obtain a handle to a
   specific state for a the client device. This operation may be slow too.
 
@@ -1041,14 +1032,30 @@ The semantics of the pinctrl APIs are:
 
 - pinctrl_put() frees all information associated with a pinctrl handle.
 
+- devm_pinctrl_put() is a variant of pinctrl_put() that may be used to
+  explicitly destroy a pinctrl object returned by devm_pinctrl_get().
+  However, use of this function will be rare, due to the automatic cleanup
+  that will occur even without calling it.
+
+  pinctrl_get() must be paired with a plain pinctrl_put().
+  pinctrl_get() may not be paired with devm_pinctrl_put().
+  devm_pinctrl_get() can optionally be paired with devm_pinctrl_put().
+  devm_pinctrl_get() may not be paired with plain pinctrl_put().
+
 Usually the pin control core handled the get/put pair and call out to the
 device drivers bookkeeping operations, like checking available functions and
 the associated pins, whereas the enable/disable pass on to the pin controller
 driver which takes care of activating and/or deactivating the mux setting by
 quickly poking some registers.
 
-The pins are allocated for your device when you issue the pinctrl_get() call,
-after this you should be able to see this in the debugfs listing of all pins.
+The pins are allocated for your device when you issue the devm_pinctrl_get()
+call, after this you should be able to see this in the debugfs listing of all
+pins.
+
+NOTE: the pinctrl system will return -EPROBE_DEFER if it cannot find the
+requested pinctrl handles, for example if the pinctrl driver has not yet
+registered. Thus make sure that the error path in your driver gracefully
+cleans up and is ready to retry the probing later in the startup process.
 
 
 System pin control hogging
@@ -1094,13 +1101,13 @@ it, disables and releases it, and muxes it in on the pins defined by group B:
 
 #include <linux/pinctrl/consumer.h>
 
-foo_switch()
-{
-	struct pinctrl *p;
-	struct pinctrl_state *s1, *s2;
+struct pinctrl *p;
+struct pinctrl_state *s1, *s2;
 
+foo_probe()
+{
 	/* Setup */
-	p = pinctrl_get(&device);
+	p = devm_pinctrl_get(&device);
 	if (IS_ERR(p))
 		...
 
@@ -1111,7 +1118,10 @@ foo_switch()
 	s2 = pinctrl_lookup_state(foo->p, "pos-B");
 	if (IS_ERR(s2))
 		...
+}
 
+foo_switch()
+{
 	/* Enable on position A */
 	ret = pinctrl_select_state(s1);
 	if (ret < 0)
@@ -1125,8 +1135,6 @@ foo_switch()
 	    ...
 
 	...
-
-	pinctrl_put(p);
 }
 
 The above has to be done from process context.

MAINTAINERS

@@ -1882,6 +1882,16 @@ F:	Documentation/filesystems/coda.txt
 F:	fs/coda/
 F:	include/linux/coda*.h
 
+COMMON CLK FRAMEWORK
+M:	Mike Turquette <mturquette@ti.com>
+M:	Mike Turquette <mturquette@linaro.org>
+L:	linux-arm-kernel@lists.infradead.org (same as CLK API & CLKDEV)
+T:	git git://git.linaro.org/people/mturquette/linux.git
+S:	Maintained
+F:	drivers/clk/clk.c
+F:	drivers/clk/clk-*
+F:	include/linux/clk-pr*
+
 COMMON INTERNET FILE SYSTEM (CIFS)
 M:	Steve French <sfrench@samba.org>
 L:	linux-cifs@vger.kernel.org
@@ -5235,6 +5245,14 @@ M:	Linus Walleij <linus.walleij@linaro.org>
 S:	Maintained
 F:	drivers/pinctrl/
 
+PIN CONTROLLER - ST SPEAR
+M:	Viresh Kumar <viresh.kumar@st.com>
+L:	spear-devel@list.st.com
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+W:	http://www.st.com/spear
+S:	Maintained
+F:	driver/pinctrl/spear/
+
 PKTCDVD DRIVER
 M:	Peter Osterlund <petero2@telia.com>
 S:	Maintained
@@ -6299,52 +6317,48 @@ F:	include/linux/compiler.h
 
 SPEAR PLATFORM SUPPORT
 M:	Viresh Kumar <viresh.kumar@st.com>
+M:	Shiraz Hashim <shiraz.hashim@st.com>
 L:	spear-devel@list.st.com
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.st.com/spear
 S:	Maintained
 F:	arch/arm/plat-spear/
 
-SPEAR3XX MACHINE SUPPORT
+SPEAR13XX MACHINE SUPPORT
 M:	Viresh Kumar <viresh.kumar@st.com>
+M:	Shiraz Hashim <shiraz.hashim@st.com>
 L:	spear-devel@list.st.com
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.st.com/spear
 S:	Maintained
-F:	arch/arm/mach-spear3xx/
+F:	arch/arm/mach-spear13xx/
 
-SPEAR6XX MACHINE SUPPORT
-M:	Rajeev Kumar <rajeev-dlh.kumar@st.com>
+SPEAR3XX MACHINE SUPPORT
+M:	Viresh Kumar <viresh.kumar@st.com>
+M:	Shiraz Hashim <shiraz.hashim@st.com>
 L:	spear-devel@list.st.com
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.st.com/spear
 S:	Maintained
-F:	arch/arm/mach-spear6xx/
+F:	arch/arm/mach-spear3xx/
 
-SPEAR CLOCK FRAMEWORK SUPPORT
+SPEAR6XX MACHINE SUPPORT
+M:	Rajeev Kumar <rajeev-dlh.kumar@st.com>
+M:	Shiraz Hashim <shiraz.hashim@st.com>
 M:	Viresh Kumar <viresh.kumar@st.com>
 L:	spear-devel@list.st.com
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.st.com/spear
 S:	Maintained
-F:	arch/arm/mach-spear*/clock.c
-F:	arch/arm/plat-spear/clock.c
-F:	arch/arm/plat-spear/include/plat/clock.h
+F:	arch/arm/mach-spear6xx/
 
-SPEAR PAD MULTIPLEXING SUPPORT
+SPEAR CLOCK FRAMEWORK SUPPORT
 M:	Viresh Kumar <viresh.kumar@st.com>
 L:	spear-devel@list.st.com
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.st.com/spear
 S:	Maintained
-F:	arch/arm/plat-spear/include/plat/padmux.h
-F:	arch/arm/plat-spear/padmux.c
-F:	arch/arm/mach-spear*/spear*xx.c
-F:	arch/arm/mach-spear*/include/mach/generic.h
-F:	arch/arm/mach-spear3xx/spear3*0.c
-F:	arch/arm/mach-spear3xx/spear3*0_evb.c
-F:	arch/arm/mach-spear6xx/spear600.c
-F:	arch/arm/mach-spear6xx/spear600_evb.c
+F:	drivers/clk/spear/
 
 SPI SUBSYSTEM
 M:	Grant Likely <grant.likely@secretlab.ca>

arch/arm/Kconfig

@@ -980,6 +980,7 @@ config PLAT_SPEAR
 	select ARM_AMBA
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
+	select COMMON_CLK
 	select CLKSRC_MMIO
 	select GENERIC_CLOCKEVENTS
 	select HAVE_CLK

arch/arm/Makefile

@@ -192,6 +192,8 @@ machine-$(CONFIG_ARCH_VEXPRESS)		:= vexpress
 machine-$(CONFIG_ARCH_VT8500)		:= vt8500
 machine-$(CONFIG_ARCH_W90X900)		:= w90x900
 machine-$(CONFIG_FOOTBRIDGE)		:= footbridge
+machine-$(CONFIG_MACH_SPEAR1310)	:= spear13xx
+machine-$(CONFIG_MACH_SPEAR1340)	:= spear13xx
 machine-$(CONFIG_MACH_SPEAR300)		:= spear3xx
 machine-$(CONFIG_MACH_SPEAR310)		:= spear3xx
 machine-$(CONFIG_MACH_SPEAR320)		:= spear3xx

arch/arm/boot/dts/spear1310-evb.dts

@@ -0,0 +1,292 @@
+/*
+ * DTS file for SPEAr1310 Evaluation Baord
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "spear1310.dtsi"
+
+/ {
+	model = "ST SPEAr1310 Evaluation Board";
+	compatible = "st,spear1310-evb", "st,spear1310";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	ahb {
+		pinmux@e0700000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				i2c0-pmx {
+					st,pins = "i2c0_grp";
+					st,function = "i2c0";
+				};
+				i2s1 {
+					st,pins = "i2s1_grp";
+					st,function = "i2s1";
+				};
+				gpio {
+					st,pins = "arm_gpio_grp";
+					st,function = "arm_gpio";
+				};
+				eth {
+					st,pins = "gmii_grp";
+					st,function = "gmii";
+				};
+				ssp0 {
+					st,pins = "ssp0_grp";
+					st,function = "ssp0";
+				};
+				kbd {
+					st,pins = "keyboard_6x6_grp";
+					st,function = "keyboard";
+				};
+				sdhci {
+					st,pins = "sdhci_grp";
+					st,function = "sdhci";
+				};
+				smi-pmx {
+					st,pins = "smi_2_chips_grp";
+					st,function = "smi";
+				};
+				uart0 {
+					st,pins = "uart0_grp";
+					st,function = "uart0";
+				};
+				rs485 {
+					st,pins = "rs485_0_1_tdm_0_1_grp";
+					st,function = "rs485_0_1_tdm_0_1";
+				};
+				i2c1_2 {
+					st,pins = "i2c_1_2_grp";
+					st,function = "i2c_1_2";
+				};
+				pci {
+					st,pins = "pcie0_grp","pcie1_grp",
+						"pcie2_grp";
+					st,function = "pci";
+				};
+				smii {
+					st,pins = "smii_0_1_2_grp";
+					st,function = "smii_0_1_2";
+				};
+				nand {
+					st,pins = "nand_8bit_grp",
+						"nand_16bit_grp";
+					st,function = "nand";
+				};
+			};
+		};
+
+		ahci@b1000000 {
+			status = "okay";
+		};
+
+		cf@b2800000 {
+			status = "okay";
+		};
+
+		dma@ea800000 {
+			status = "okay";
+		};
+
+		dma@eb000000 {
+			status = "okay";
+		};
+
+		fsmc: flash@b0000000 {
+			status = "okay";
+		};
+
+		gmac0: eth@e2000000 {
+			status = "okay";
+		};
+
+		sdhci@b3000000 {
+			status = "okay";
+		};
+
+		smi: flash@ea000000 {
+			status = "okay";
+			clock-rate=<50000000>;
+
+			flash@e6000000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xe6000000 0x800000>;
+				st,smi-fast-mode;
+
+				partition@0 {
+					label = "xloader";
+					reg = <0x0 0x10000>;
+				};
+				partition@10000 {
+					label = "u-boot";
+					reg = <0x10000 0x40000>;
+				};
+				partition@50000 {
+					label = "linux";
+					reg = <0x50000 0x2c0000>;
+				};
+				partition@310000 {
+					label = "rootfs";
+					reg = <0x310000 0x4f0000>;
+				};
+			};
+		};
+
+		spi0: spi@e0100000 {
+			status = "okay";
+		};
+
+		ehci@e4800000 {
+			status = "okay";
+		};
+
+		ehci@e5800000 {
+			status = "okay";
+		};
+
+		ohci@e4000000 {
+			status = "okay";
+		};
+
+		ohci@e5000000 {
+			status = "okay";
+		};
+
+		apb {
+			adc@e0080000 {
+				status = "okay";
+			};
+
+			gpio0: gpio@e0600000 {
+			       status = "okay";
+			};
+
+			gpio1: gpio@e0680000 {
+			       status = "okay";
+			};
+
+			i2c0: i2c@e0280000 {
+			       status = "okay";
+			};
+
+			i2c1: i2c@5cd00000 {
+			       status = "okay";
+			};
+
+			kbd@e0300000 {
+				linux,keymap = < 0x00000001
+						 0x00010002
+						 0x00020003
+						 0x00030004
+						 0x00040005
+						 0x00050006
+						 0x00060007
+						 0x00070008
+						 0x00080009
+						 0x0100000a
+						 0x0101000c
+						 0x0102000d
+						 0x0103000e
+						 0x0104000f
+						 0x01050010
+						 0x01060011
+						 0x01070012
+						 0x01080013
+						 0x02000014
+						 0x02010015
+						 0x02020016
+						 0x02030017
+						 0x02040018
+						 0x02050019
+						 0x0206001a
+						 0x0207001b
+						 0x0208001c
+						 0x0300001d
+						 0x0301001e
+						 0x0302001f
+						 0x03030020
+						 0x03040021
+						 0x03050022
+						 0x03060023
+						 0x03070024
+						 0x03080025
+						 0x04000026
+						 0x04010027
+						 0x04020028
+						 0x04030029
+						 0x0404002a
+						 0x0405002b
+						 0x0406002c
+						 0x0407002d
+						 0x0408002e
+						 0x0500002f
+						 0x05010030
+						 0x05020031
+						 0x05030032
+						 0x05040033
+						 0x05050034
+						 0x05060035
+						 0x05070036
+						 0x05080037
+						 0x06000038
+						 0x06010039
+						 0x0602003a
+						 0x0603003b
+						 0x0604003c
+						 0x0605003d
+						 0x0606003e
+						 0x0607003f
+						 0x06080040
+						 0x07000041
+						 0x07010042
+						 0x07020043
+						 0x07030044
+						 0x07040045
+						 0x07050046
+						 0x07060047
+						 0x07070048
+						 0x07080049
+						 0x0800004a
+						 0x0801004b
+						 0x0802004c
+						 0x0803004d
+						 0x0804004e
+						 0x0805004f
+						 0x08060050
+						 0x08070051
+						 0x08080052 >;
+			       autorepeat;
+			       st,mode = <0>;
+			       status = "okay";
+			};
+
+			rtc@e0580000 {
+			       status = "okay";
+			};
+
+			serial@e0000000 {
+			       status = "okay";
+			};
+
+			wdt@ec800620 {
+			       status = "okay";
+			};
+		};
+	};
+};

arch/arm/boot/dts/spear1310.dtsi

@@ -0,0 +1,184 @@
+/*
+ * DTS file for all SPEAr1310 SoCs
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "spear13xx.dtsi"
+
+/ {
+	compatible = "st,spear1310";
+
+	ahb {
+		ahci@b1000000 {
+			compatible = "snps,spear-ahci";
+			reg = <0xb1000000 0x10000>;
+			interrupts = <0 68 0x4>;
+			status = "disabled";
+		};
+
+		ahci@b1800000 {
+			compatible = "snps,spear-ahci";
+			reg = <0xb1800000 0x10000>;
+			interrupts = <0 69 0x4>;
+			status = "disabled";
+		};
+
+		ahci@b4000000 {
+			compatible = "snps,spear-ahci";
+			reg = <0xb4000000 0x10000>;
+			interrupts = <0 70 0x4>;
+			status = "disabled";
+		};
+
+		gmac1: eth@5c400000 {
+			compatible = "st,spear600-gmac";
+			reg = <0x5c400000 0x8000>;
+			interrupts = <0 95 0x4>;
+			interrupt-names = "macirq";
+			status = "disabled";
+		};
+
+		gmac2: eth@5c500000 {
+			compatible = "st,spear600-gmac";
+			reg = <0x5c500000 0x8000>;
+			interrupts = <0 96 0x4>;
+			interrupt-names = "macirq";
+			status = "disabled";
+		};
+
+		gmac3: eth@5c600000 {
+			compatible = "st,spear600-gmac";
+			reg = <0x5c600000 0x8000>;
+			interrupts = <0 97 0x4>;
+			interrupt-names = "macirq";
+			status = "disabled";
+		};
+
+		gmac4: eth@5c700000 {
+			compatible = "st,spear600-gmac";
+			reg = <0x5c700000 0x8000>;
+			interrupts = <0 98 0x4>;
+			interrupt-names = "macirq";
+			status = "disabled";
+		};
+
+		spi1: spi@5d400000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x5d400000 0x1000>;
+			interrupts = <0 99 0x4>;
+			status = "disabled";
+		};
+
+		apb {
+			i2c1: i2c@5cd00000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5cd00000 0x1000>;
+				interrupts = <0 87 0x4>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@5ce00000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5ce00000 0x1000>;
+				interrupts = <0 88 0x4>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@5cf00000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5cf00000 0x1000>;
+				interrupts = <0 89 0x4>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@5d000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5d000000 0x1000>;
+				interrupts = <0 90 0x4>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@5d100000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5d100000 0x1000>;
+				interrupts = <0 91 0x4>;
+				status = "disabled";
+			};
+
+			i2c6: i2c@5d200000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5d200000 0x1000>;
+				interrupts = <0 92 0x4>;
+				status = "disabled";
+			};
+
+			i2c7: i2c@5d300000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5d300000 0x1000>;
+				interrupts = <0 93 0x4>;
+				status = "disabled";
+			};
+
+			serial@5c800000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x5c800000 0x1000>;
+				interrupts = <0 82 0x4>;
+				status = "disabled";
+			};
+
+			serial@5c900000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x5c900000 0x1000>;
+				interrupts = <0 83 0x4>;
+				status = "disabled";
+			};
+
+			serial@5ca00000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x5ca00000 0x1000>;
+				interrupts = <0 84 0x4>;
+				status = "disabled";
+			};
+
+			serial@5cb00000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x5cb00000 0x1000>;
+				interrupts = <0 85 0x4>;
+				status = "disabled";
+			};
+
+			serial@5cc00000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x5cc00000 0x1000>;
+				interrupts = <0 86 0x4>;
+				status = "disabled";
+			};
+
+			thermal@e07008c4 {
+				st,thermal-flags = <0x7000>;
+			};
+		};
+	};
+};

arch/arm/boot/dts/spear1340-evb.dts

@@ -0,0 +1,308 @@
+/*
+ * DTS file for SPEAr1340 Evaluation Baord
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "spear1340.dtsi"
+
+/ {
+	model = "ST SPEAr1340 Evaluation Board";
+	compatible = "st,spear1340-evb", "st,spear1340";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	ahb {
+		pinmux@e0700000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				pads_as_gpio {
+					st,pins = "pads_as_gpio_grp";
+					st,function = "pads_as_gpio";
+				};
+				fsmc {
+					st,pins = "fsmc_8bit_grp";
+					st,function = "fsmc";
+				};
+				kbd {
+					st,pins = "keyboard_row_col_grp",
+						"keyboard_col5_grp";
+					st,function = "keyboard";
+				};
+				uart0 {
+					st,pins = "uart0_grp", "uart0_enh_grp";
+					st,function = "uart0";
+				};
+				i2c0-pmx {
+					st,pins = "i2c0_grp";
+					st,function = "i2c0";
+				};
+				i2c1-pmx {
+					st,pins = "i2c1_grp";
+					st,function = "i2c1";
+				};
+				spdif-in {
+					st,pins = "spdif_in_grp";
+					st,function = "spdif_in";
+				};
+				spdif-out {
+					st,pins = "spdif_out_grp";
+					st,function = "spdif_out";
+				};
+				ssp0 {
+					st,pins = "ssp0_grp", "ssp0_cs1_grp",
+						"ssp0_cs3_grp";
+					st,function = "ssp0";
+				};
+				pwm {
+					st,pins = "pwm2_grp", "pwm3_grp";
+					st,function = "pwm";
+				};
+				smi-pmx {
+					st,pins = "smi_grp";
+					st,function = "smi";
+				};
+				i2s {
+					st,pins = "i2s_in_grp", "i2s_out_grp";
+					st,function = "i2s";
+				};
+				gmac {
+					st,pins = "gmii_grp", "rgmii_grp";
+					st,function = "gmac";
+				};
+				cam3 {
+					st,pins = "cam3_grp";
+					st,function = "cam3";
+				};
+				cec0 {
+					st,pins = "cec0_grp";
+					st,function = "cec0";
+				};
+				cec1 {
+					st,pins = "cec1_grp";
+					st,function = "cec1";
+				};
+				sdhci {
+					st,pins = "sdhci_grp";
+					st,function = "sdhci";
+				};
+				clcd {
+					st,pins = "clcd_grp";
+					st,function = "clcd";
+				};
+				sata {
+					st,pins = "sata_grp";
+					st,function = "sata";
+				};
+			};
+		};
+
+		dma@ea800000 {
+			status = "okay";
+		};
+
+		dma@eb000000 {
+			status = "okay";
+		};
+
+		fsmc: flash@b0000000 {
+			status = "okay";
+		};
+
+		gmac0: eth@e2000000 {
+			status = "okay";
+		};
+
+		sdhci@b3000000 {
+			status = "okay";
+		};
+
+		smi: flash@ea000000 {
+			status = "okay";
+			clock-rate=<50000000>;
+
+			flash@e6000000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xe6000000 0x800000>;
+				st,smi-fast-mode;
+
+				partition@0 {
+					label = "xloader";
+					reg = <0x0 0x10000>;
+				};
+				partition@10000 {
+					label = "u-boot";
+					reg = <0x10000 0x40000>;
+				};
+				partition@50000 {
+					label = "linux";
+					reg = <0x50000 0x2c0000>;
+				};
+				partition@310000 {
+					label = "rootfs";
+					reg = <0x310000 0x4f0000>;
+				};
+			};
+		};
+
+		spi0: spi@e0100000 {
+			status = "okay";
+		};
+
+		ehci@e4800000 {
+			status = "okay";
+		};
+
+		ehci@e5800000 {
+			status = "okay";
+		};
+
+		ohci@e4000000 {
+			status = "okay";
+		};
+
+		ohci@e5000000 {
+			status = "okay";
+		};
+
+		apb {
+			adc@e0080000 {
+				status = "okay";
+			};
+
+			gpio0: gpio@e0600000 {
+			       status = "okay";
+			};
+
+			gpio1: gpio@e0680000 {
+			       status = "okay";
+			};
+
+			i2c0: i2c@e0280000 {
+			       status = "okay";
+			};
+
+			i2c1: i2c@b4000000 {
+			       status = "okay";
+			};
+
+			kbd@e0300000 {
+				linux,keymap = < 0x00000001
+						 0x00010002
+						 0x00020003
+						 0x00030004
+						 0x00040005
+						 0x00050006
+						 0x00060007
+						 0x00070008
+						 0x00080009
+						 0x0100000a
+						 0x0101000c
+						 0x0102000d
+						 0x0103000e
+						 0x0104000f
+						 0x01050010
+						 0x01060011
+						 0x01070012
+						 0x01080013
+						 0x02000014
+						 0x02010015
+						 0x02020016
+						 0x02030017
+						 0x02040018
+						 0x02050019
+						 0x0206001a
+						 0x0207001b
+						 0x0208001c
+						 0x0300001d
+						 0x0301001e
+						 0x0302001f
+						 0x03030020
+						 0x03040021
+						 0x03050022
+						 0x03060023
+						 0x03070024
+						 0x03080025
+						 0x04000026
+						 0x04010027
+						 0x04020028
+						 0x04030029
+						 0x0404002a
+						 0x0405002b
+						 0x0406002c
+						 0x0407002d
+						 0x0408002e
+						 0x0500002f
+						 0x05010030
+						 0x05020031
+						 0x05030032
+						 0x05040033
+						 0x05050034
+						 0x05060035
+						 0x05070036
+						 0x05080037
+						 0x06000038
+						 0x06010039
+						 0x0602003a
+						 0x0603003b
+						 0x0604003c
+						 0x0605003d
+						 0x0606003e
+						 0x0607003f
+						 0x06080040
+						 0x07000041
+						 0x07010042
+						 0x07020043
+						 0x07030044
+						 0x07040045
+						 0x07050046
+						 0x07060047
+						 0x07070048
+						 0x07080049
+						 0x0800004a
+						 0x0801004b
+						 0x0802004c
+						 0x0803004d
+						 0x0804004e
+						 0x0805004f
+						 0x08060050
+						 0x08070051
+						 0x08080052 >;
+			       autorepeat;
+			       st,mode = <0>;
+			       status = "okay";
+			};
+
+			rtc@e0580000 {
+			       status = "okay";
+			};
+
+			serial@e0000000 {
+			       status = "okay";
+			};
+
+			serial@b4100000 {
+			       status = "okay";
+			};
+
+			wdt@ec800620 {
+			       status = "okay";
+			};
+		};
+	};
+};

arch/arm/boot/dts/spear1340.dtsi

@@ -0,0 +1,56 @@
+/*
+ * DTS file for all SPEAr1340 SoCs
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "spear13xx.dtsi"
+
+/ {
+	compatible = "st,spear1340";
+
+	ahb {
+		ahci@b1000000 {
+			compatible = "snps,spear-ahci";
+			reg = <0xb1000000 0x10000>;
+			interrupts = <0 72 0x4>;
+			status = "disabled";
+		};
+
+		spi1: spi@5d400000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x5d400000 0x1000>;
+			interrupts = <0 99 0x4>;
+			status = "disabled";
+		};
+
+		apb {
+			i2c1: i2c@b4000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0xb4000000 0x1000>;
+				interrupts = <0 104 0x4>;
+				status = "disabled";
+			};
+
+			serial@b4100000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xb4100000 0x1000>;
+				interrupts = <0 105 0x4>;
+				status = "disabled";
+			};
+
+			thermal@e07008c4 {
+				st,thermal-flags = <0x2a00>;
+			};
+		};
+	};
+};

arch/arm/boot/dts/spear13xx.dtsi

@@ -0,0 +1,262 @@
+/*
+ * DTS file for all SPEAr13xx SoCs
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	gic: interrupt-controller@ec801000 {
+		compatible = "arm,cortex-a9-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = < 0xec801000 0x1000 >,
+		      < 0xec800100 0x0100 >;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <0 8 0x04
+			      0 9 0x04>;
+	};
+
+	L2: l2-cache {
+		    compatible = "arm,pl310-cache";
+		    reg = <0xed000000 0x1000>;
+		    cache-unified;
+		    cache-level = <2>;
+	};
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyAMA0,115200";
+	};
+
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0x50000000 0x50000000 0x10000000
+			  0xb0000000 0xb0000000 0x10000000
+			  0xe0000000 0xe0000000 0x10000000>;
+
+		sdhci@b3000000 {
+			compatible = "st,sdhci-spear";
+			reg = <0xb3000000 0x100>;
+			interrupts = <0 28 0x4>;
+			status = "disabled";
+		};
+
+		cf@b2800000 {
+			compatible = "arasan,cf-spear1340";
+			reg = <0xb2800000 0x100>;
+			interrupts = <0 29 0x4>;
+			status = "disabled";
+		};
+
+		dma@ea800000 {
+			compatible = "snps,dma-spear1340";
+			reg = <0xea800000 0x1000>;
+			interrupts = <0 19 0x4>;
+			status = "disabled";
+		};
+
+		dma@eb000000 {
+			compatible = "snps,dma-spear1340";
+			reg = <0xeb000000 0x1000>;
+			interrupts = <0 59 0x4>;
+			status = "disabled";
+		};
+
+		fsmc: flash@b0000000 {
+			compatible = "st,spear600-fsmc-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xb0000000 0x1000	/* FSMC Register */
+			       0xb0800000 0x0010>;	/* NAND Base */
+			reg-names = "fsmc_regs", "nand_data";
+			interrupts = <0 20 0x4
+				      0 21 0x4
+				      0 22 0x4
+				      0 23 0x4>;
+			st,ale-off = <0x20000>;
+			st,cle-off = <0x10000>;
+			status = "disabled";
+		};
+
+		gmac0: eth@e2000000 {
+			compatible = "st,spear600-gmac";
+			reg = <0xe2000000 0x8000>;
+			interrupts = <0 23 0x4
+				      0 24 0x4>;
+			interrupt-names = "macirq", "eth_wake_irq";
+			status = "disabled";
+		};
+
+		smi: flash@ea000000 {
+			compatible = "st,spear600-smi";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xea000000 0x1000>;
+			interrupts = <0 30 0x4>;
+			status = "disabled";
+		};
+
+		spi0: spi@e0100000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0xe0100000 0x1000>;
+			interrupts = <0 31 0x4>;
+			status = "disabled";
+		};
+
+		ehci@e4800000 {
+			compatible = "st,spear600-ehci", "usb-ehci";
+			reg = <0xe4800000 0x1000>;
+			interrupts = <0 64 0x4>;
+			status = "disabled";
+		};
+
+		ehci@e5800000 {
+			compatible = "st,spear600-ehci", "usb-ehci";
+			reg = <0xe5800000 0x1000>;
+			interrupts = <0 66 0x4>;
+			status = "disabled";
+		};
+
+		ohci@e4000000 {
+			compatible = "st,spear600-ohci", "usb-ohci";
+			reg = <0xe4000000 0x1000>;
+			interrupts = <0 65 0x4>;
+			status = "disabled";
+		};
+
+		ohci@e5000000 {
+			compatible = "st,spear600-ohci", "usb-ohci";
+			reg = <0xe5000000 0x1000>;
+			interrupts = <0 67 0x4>;
+			status = "disabled";
+		};
+
+		apb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0x50000000 0x50000000 0x10000000
+				  0xb0000000 0xb0000000 0x10000000
+				  0xe0000000 0xe0000000 0x10000000>;
+
+			gpio0: gpio@e0600000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xe0600000 0x1000>;
+				interrupts = <0 24 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio1: gpio@e0680000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xe0680000 0x1000>;
+				interrupts = <0 25 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			kbd@e0300000 {
+				compatible = "st,spear300-kbd";
+				reg = <0xe0300000 0x1000>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@e0280000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0xe0280000 0x1000>;
+				interrupts = <0 41 0x4>;
+				status = "disabled";
+			};
+
+			rtc@e0580000 {
+				compatible = "st,spear-rtc";
+				reg = <0xe0580000 0x1000>;
+				interrupts = <0 36 0x4>;
+				status = "disabled";
+			};
+
+			serial@e0000000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xe0000000 0x1000>;
+				interrupts = <0 36 0x4>;
+				status = "disabled";
+			};
+
+			adc@e0080000 {
+				compatible = "st,spear600-adc";
+				reg = <0xe0080000 0x1000>;
+				interrupts = <0 44 0x4>;
+				status = "disabled";
+			};
+
+			timer@e0380000 {
+				compatible = "st,spear-timer";
+				reg = <0xe0380000 0x400>;
+				interrupts = <0 37 0x4>;
+			};
+
+			timer@ec800600 {
+				compatible = "arm,cortex-a9-twd-timer";
+				reg = <0xec800600 0x20>;
+				interrupts = <1 13 0x301>;
+			};
+
+			wdt@ec800620 {
+				compatible = "arm,cortex-a9-twd-wdt";
+				reg = <0xec800620 0x20>;
+				status = "disabled";
+			};
+
+			thermal@e07008c4 {
+				compatible = "st,thermal-spear1340";
+				reg = <0xe07008c4 0x4>;
+			};
+		};
+	};
+};

arch/arm/boot/dts/spear300-evb.dts

@@ -0,0 +1,246 @@
+/*
+ * DTS file for SPEAr300 Evaluation Baord
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "spear300.dtsi"
+
+/ {
+	model = "ST SPEAr300 Evaluation Board";
+	compatible = "st,spear300-evb", "st,spear300";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	ahb {
+		pinmux@99000000 {
+			st,pinmux-mode = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				i2c0 {
+					st,pins = "i2c0_grp";
+					st,function = "i2c0";
+				};
+				ssp0 {
+					st,pins = "ssp0_grp";
+					st,function = "ssp0";
+				};
+				mii0 {
+					st,pins = "mii0_grp";
+					st,function = "mii0";
+				};
+				uart0 {
+					st,pins = "uart0_grp";
+					st,function = "uart0";
+				};
+				clcd {
+					st,pins = "clcd_pfmode_grp";
+					st,function = "clcd";
+				};
+				sdhci {
+					st,pins = "sdhci_4bit_grp";
+					st,function = "sdhci";
+				};
+				gpio1 {
+					st,pins = "gpio1_4_to_7_grp",
+						"gpio1_0_to_3_grp";
+					st,function = "gpio1";
+				};
+			};
+		};
+
+		clcd@60000000 {
+			status = "okay";
+		};
+
+		dma@fc400000 {
+			status = "okay";
+		};
+
+		fsmc: flash@94000000 {
+			status = "okay";
+		};
+
+		gmac: eth@e0800000 {
+			status = "okay";
+		};
+
+		sdhci@70000000 {
+			int-gpio = <&gpio1 0 0>;
+			power-gpio = <&gpio1 2 1>;
+			status = "okay";
+		};
+
+		smi: flash@fc000000 {
+			status = "okay";
+			clock-rate=<50000000>;
+
+			flash@f8000000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xf8000000 0x800000>;
+				st,smi-fast-mode;
+
+				partition@0 {
+					label = "xloader";
+					reg = <0x0 0x10000>;
+				};
+				partition@10000 {
+					label = "u-boot";
+					reg = <0x10000 0x40000>;
+				};
+				partition@50000 {
+					label = "linux";
+					reg = <0x50000 0x2c0000>;
+				};
+				partition@310000 {
+					label = "rootfs";
+					reg = <0x310000 0x4f0000>;
+				};
+			};
+		};
+
+		spi0: spi@d0100000 {
+			status = "okay";
+		};
+
+		ehci@e1800000 {
+			status = "okay";
+		};
+
+		ohci@e1900000 {
+			status = "okay";
+		};
+
+		ohci@e2100000 {
+			status = "okay";
+		};
+
+		apb {
+			gpio0: gpio@fc980000 {
+			       status = "okay";
+			};
+
+			gpio1: gpio@a9000000 {
+			       status = "okay";
+			};
+
+			i2c0: i2c@d0180000 {
+			       status = "okay";
+			};
+
+			kbd@a0000000 {
+				linux,keymap = < 0x00000001
+						 0x00010002
+						 0x00020003
+						 0x00030004
+						 0x00040005
+						 0x00050006
+						 0x00060007
+						 0x00070008
+						 0x00080009
+						 0x0100000a
+						 0x0101000c
+						 0x0102000d
+						 0x0103000e
+						 0x0104000f
+						 0x01050010
+						 0x01060011
+						 0x01070012
+						 0x01080013
+						 0x02000014
+						 0x02010015
+						 0x02020016
+						 0x02030017
+						 0x02040018
+						 0x02050019
+						 0x0206001a
+						 0x0207001b
+						 0x0208001c
+						 0x0300001d
+						 0x0301001e
+						 0x0302001f
+						 0x03030020
+						 0x03040021
+						 0x03050022
+						 0x03060023
+						 0x03070024
+						 0x03080025
+						 0x04000026
+						 0x04010027
+						 0x04020028
+						 0x04030029
+						 0x0404002a
+						 0x0405002b
+						 0x0406002c
+						 0x0407002d
+						 0x0408002e
+						 0x0500002f
+						 0x05010030
+						 0x05020031
+						 0x05030032
+						 0x05040033
+						 0x05050034
+						 0x05060035
+						 0x05070036
+						 0x05080037
+						 0x06000038
+						 0x06010039
+						 0x0602003a
+						 0x0603003b
+						 0x0604003c
+						 0x0605003d
+						 0x0606003e
+						 0x0607003f
+						 0x06080040
+						 0x07000041
+						 0x07010042
+						 0x07020043
+						 0x07030044
+						 0x07040045
+						 0x07050046
+						 0x07060047
+						 0x07070048
+						 0x07080049
+						 0x0800004a
+						 0x0801004b
+						 0x0802004c
+						 0x0803004d
+						 0x0804004e
+						 0x0805004f
+						 0x08060050
+						 0x08070051
+						 0x08080052 >;
+			       autorepeat;
+			       st,mode = <0>;
+			       status = "okay";
+			};
+
+			rtc@fc900000 {
+			       status = "okay";
+			};
+
+			serial@d0000000 {
+			       status = "okay";
+			};
+
+			wdt@fc880000 {
+			       status = "okay";
+			};
+		};
+	};
+};

arch/arm/boot/dts/spear300.dtsi

@@ -0,0 +1,77 @@
+/*
+ * DTS file for SPEAr300 SoC
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "spear3xx.dtsi"
+
+/ {
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0x60000000 0x60000000 0x50000000
+			  0xd0000000 0xd0000000 0x30000000>;
+
+		pinmux@99000000 {
+			compatible = "st,spear300-pinmux";
+			reg = <0x99000000 0x1000>;
+		};
+
+		clcd@60000000 {
+			compatible = "arm,clcd-pl110", "arm,primecell";
+			reg = <0x60000000 0x1000>;
+			interrupts = <30>;
+			status = "disabled";
+		};
+
+		fsmc: flash@94000000 {
+			compatible = "st,spear600-fsmc-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x94000000 0x1000	/* FSMC Register */
+			       0x80000000 0x0010>;	/* NAND Base */
+			reg-names = "fsmc_regs", "nand_data";
+			st,ale-off = <0x20000>;
+			st,cle-off = <0x10000>;
+			status = "disabled";
+		};
+
+		sdhci@70000000 {
+			compatible = "st,sdhci-spear";
+			reg = <0x70000000 0x100>;
+			interrupts = <1>;
+			status = "disabled";
+		};
+
+		apb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0xa0000000 0xa0000000 0x10000000
+				  0xd0000000 0xd0000000 0x30000000>;
+
+			gpio1: gpio@a9000000 {
+				#gpio-cells = <2>;
+				compatible = "arm,pl061", "arm,primecell";
+				gpio-controller;
+				reg = <0xa9000000 0x1000>;
+				status = "disabled";
+			};
+
+			kbd@a0000000 {
+				compatible = "st,spear300-kbd";
+				reg = <0xa0000000 0x1000>;
+				status = "disabled";
+			};
+		};
+	};
+};

arch/arm/boot/dts/spear310-evb.dts

@@ -0,0 +1,188 @@
+/*
+ * DTS file for SPEAr310 Evaluation Baord
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "spear310.dtsi"
+
+/ {
+	model = "ST SPEAr310 Evaluation Board";
+	compatible = "st,spear310-evb", "st,spear310";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	ahb {
+		pinmux@b4000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				gpio0 {
+					st,pins = "gpio0_pin0_grp",
+						"gpio0_pin1_grp",
+						"gpio0_pin2_grp",
+						"gpio0_pin3_grp",
+						"gpio0_pin4_grp",
+						"gpio0_pin5_grp";
+					st,function = "gpio0";
+				};
+				i2c0 {
+					st,pins = "i2c0_grp";
+					st,function = "i2c0";
+				};
+				mii0 {
+					st,pins = "mii0_grp";
+					st,function = "mii0";
+				};
+				ssp0 {
+					st,pins = "ssp0_grp";
+					st,function = "ssp0";
+				};
+				uart0 {
+					st,pins = "uart0_grp";
+					st,function = "uart0";
+				};
+				emi {
+					st,pins = "emi_cs_0_to_5_grp";
+					st,function = "emi";
+				};
+				fsmc {
+					st,pins = "fsmc_grp";
+					st,function = "fsmc";
+				};
+				uart1 {
+					st,pins = "uart1_grp";
+					st,function = "uart1";
+				};
+				uart2 {
+					st,pins = "uart2_grp";
+					st,function = "uart2";
+				};
+				uart3 {
+					st,pins = "uart3_grp";
+					st,function = "uart3";
+				};
+				uart4 {
+					st,pins = "uart4_grp";
+					st,function = "uart4";
+				};
+				uart5 {
+					st,pins = "uart5_grp";
+					st,function = "uart5";
+				};
+			};
+		};
+
+		dma@fc400000 {
+			status = "okay";
+		};
+
+		fsmc: flash@44000000 {
+			status = "okay";
+		};
+
+		gmac: eth@e0800000 {
+			status = "okay";
+		};
+
+		smi: flash@fc000000 {
+			status = "okay";
+			clock-rate=<50000000>;
+
+			flash@f8000000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xf8000000 0x800000>;
+				st,smi-fast-mode;
+
+				partition@0 {
+					label = "xloader";
+					reg = <0x0 0x10000>;
+				};
+				partition@10000 {
+					label = "u-boot";
+					reg = <0x10000 0x40000>;
+				};
+				partition@50000 {
+					label = "linux";
+					reg = <0x50000 0x2c0000>;
+				};
+				partition@310000 {
+					label = "rootfs";
+					reg = <0x310000 0x4f0000>;
+				};
+			};
+		};
+
+		spi0: spi@d0100000 {
+			status = "okay";
+		};
+
+		ehci@e1800000 {
+			status = "okay";
+		};
+
+		ohci@e1900000 {
+			status = "okay";
+		};
+
+		ohci@e2100000 {
+			status = "okay";
+		};
+
+		apb {
+			gpio0: gpio@fc980000 {
+			       status = "okay";
+			};
+
+			i2c0: i2c@d0180000 {
+			       status = "okay";
+			};
+
+			rtc@fc900000 {
+			       status = "okay";
+			};
+
+			serial@d0000000 {
+			       status = "okay";
+			};
+
+			serial@b2000000 {
+			       status = "okay";
+			};
+
+			serial@b2080000 {
+			       status = "okay";
+			};
+
+			serial@b2100000 {
+			       status = "okay";
+			};
+
+			serial@b2180000 {
+			       status = "okay";
+			};
+
+			serial@b2200000 {
+			       status = "okay";
+			};
+
+			wdt@fc880000 {
+			       status = "okay";
+			};
+		};
+	};
+};

arch/arm/boot/dts/spear310.dtsi

@@ -0,0 +1,80 @@
+/*
+ * DTS file for SPEAr310 SoC
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "spear3xx.dtsi"
+
+/ {
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0x40000000 0x40000000 0x10000000
+			  0xb0000000 0xb0000000 0x10000000
+			  0xd0000000 0xd0000000 0x30000000>;
+
+		pinmux@b4000000 {
+			compatible = "st,spear310-pinmux";
+			reg = <0xb4000000 0x1000>;
+		};
+
+		fsmc: flash@44000000 {
+			compatible = "st,spear600-fsmc-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x44000000 0x1000	/* FSMC Register */
+			       0x40000000 0x0010>;	/* NAND Base */
+			reg-names = "fsmc_regs", "nand_data";
+			st,ale-off = <0x10000>;
+			st,cle-off = <0x20000>;
+			status = "disabled";
+		};
+
+		apb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0xb0000000 0xb0000000 0x10000000
+				  0xd0000000 0xd0000000 0x30000000>;
+
+			serial@b2000000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xb2000000 0x1000>;
+				status = "disabled";
+			};
+
+			serial@b2080000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xb2080000 0x1000>;
+				status = "disabled";
+			};
+
+			serial@b2100000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xb2100000 0x1000>;
+				status = "disabled";
+			};
+
+			serial@b2180000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xb2180000 0x1000>;
+				status = "disabled";
+			};
+
+			serial@b2200000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xb2200000 0x1000>;
+				status = "disabled";
+			};
+		};
+	};
+};

arch/arm/boot/dts/spear320-evb.dts

@@ -0,0 +1,198 @@
+/*
+ * DTS file for SPEAr320 Evaluation Baord
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "spear320.dtsi"
+
+/ {
+	model = "ST SPEAr300 Evaluation Board";
+	compatible = "st,spear300-evb", "st,spear300";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	ahb {
+		pinmux@b3000000 {
+			st,pinmux-mode = <3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				i2c0 {
+					st,pins = "i2c0_grp";
+					st,function = "i2c0";
+				};
+				mii0 {
+					st,pins = "mii0_grp";
+					st,function = "mii0";
+				};
+				ssp0 {
+					st,pins = "ssp0_grp";
+					st,function = "ssp0";
+				};
+				uart0 {
+					st,pins = "uart0_grp";
+					st,function = "uart0";
+				};
+				sdhci {
+					st,pins = "sdhci_cd_51_grp";
+					st,function = "sdhci";
+				};
+				i2s {
+					st,pins = "i2s_grp";
+					st,function = "i2s";
+				};
+				uart1 {
+					st,pins = "uart1_grp";
+					st,function = "uart1";
+				};
+				uart2 {
+					st,pins = "uart2_grp";
+					st,function = "uart2";
+				};
+				can0 {
+					st,pins = "can0_grp";
+					st,function = "can0";
+				};
+				can1 {
+					st,pins = "can1_grp";
+					st,function = "can1";
+				};
+				mii2 {
+					st,pins = "mii2_grp";
+					st,function = "mii2";
+				};
+				pwm0_1 {
+					st,pins = "pwm0_1_pin_14_15_grp";
+					st,function = "pwm0_1";
+				};
+				pwm2 {
+					st,pins = "pwm2_pin_13_grp";
+					st,function = "pwm2";
+				};
+			};
+		};
+
+		clcd@90000000 {
+			status = "okay";
+		};
+
+		dma@fc400000 {
+			status = "okay";
+		};
+
+		fsmc: flash@4c000000 {
+			status = "okay";
+		};
+
+		gmac: eth@e0800000 {
+			status = "okay";
+		};
+
+		sdhci@70000000 {
+			power-gpio = <&gpio0 2 1>;
+			power_always_enb;
+			status = "okay";
+		};
+
+		smi: flash@fc000000 {
+			status = "okay";
+			clock-rate=<50000000>;
+
+			flash@f8000000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xf8000000 0x800000>;
+				st,smi-fast-mode;
+
+				partition@0 {
+					label = "xloader";
+					reg = <0x0 0x10000>;
+				};
+				partition@10000 {
+					label = "u-boot";
+					reg = <0x10000 0x40000>;
+				};
+				partition@50000 {
+					label = "linux";
+					reg = <0x50000 0x2c0000>;
+				};
+				partition@310000 {
+					label = "rootfs";
+					reg = <0x310000 0x4f0000>;
+				};
+			};
+		};
+
+		spi0: spi@d0100000 {
+			status = "okay";
+		};
+
+		spi1: spi@a5000000 {
+			status = "okay";
+		};
+
+		spi2: spi@a6000000 {
+			status = "okay";
+		};
+
+		ehci@e1800000 {
+			status = "okay";
+		};
+
+		ohci@e1900000 {
+			status = "okay";
+		};
+
+		ohci@e2100000 {
+			status = "okay";
+		};
+
+		apb {
+			gpio0: gpio@fc980000 {
+			       status = "okay";
+			};
+
+			i2c0: i2c@d0180000 {
+			       status = "okay";
+			};
+
+			i2c1: i2c@a7000000 {
+			       status = "okay";
+			};
+
+			rtc@fc900000 {
+			       status = "okay";
+			};
+
+			serial@d0000000 {
+			       status = "okay";
+			};
+
+			serial@a3000000 {
+			       status = "okay";
+			};
+
+			serial@a4000000 {
+			       status = "okay";
+			};
+
+			wdt@fc880000 {
+			       status = "okay";
+			};
+		};
+	};
+};

arch/arm/boot/dts/spear320.dtsi

@@ -0,0 +1,95 @@
+/*
+ * DTS file for SPEAr320 SoC
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "spear3xx.dtsi"
+
+/ {
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0x40000000 0x40000000 0x80000000
+			  0xd0000000 0xd0000000 0x30000000>;
+
+		pinmux@b3000000 {
+			compatible = "st,spear320-pinmux";
+			reg = <0xb3000000 0x1000>;
+		};
+
+		clcd@90000000 {
+			compatible = "arm,clcd-pl110", "arm,primecell";
+			reg = <0x90000000 0x1000>;
+			interrupts = <33>;
+			status = "disabled";
+		};
+
+		fsmc: flash@4c000000 {
+			compatible = "st,spear600-fsmc-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x4c000000 0x1000	/* FSMC Register */
+			       0x50000000 0x0010>;	/* NAND Base */
+			reg-names = "fsmc_regs", "nand_data";
+			st,ale-off = <0x20000>;
+			st,cle-off = <0x10000>;
+			status = "disabled";
+		};
+
+		sdhci@70000000 {
+			compatible = "st,sdhci-spear";
+			reg = <0x70000000 0x100>;
+			interrupts = <29>;
+			status = "disabled";
+		};
+
+		spi1: spi@a5000000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0xa5000000 0x1000>;
+			status = "disabled";
+		};
+
+		spi2: spi@a6000000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0xa6000000 0x1000>;
+			status = "disabled";
+		};
+
+		apb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0xa0000000 0xa0000000 0x10000000
+				  0xd0000000 0xd0000000 0x30000000>;
+
+			i2c1: i2c@a7000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0xa7000000 0x1000>;
+				status = "disabled";
+			};
+
+			serial@a3000000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xa3000000 0x1000>;
+				status = "disabled";
+			};
+
+			serial@a4000000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xa4000000 0x1000>;
+				status = "disabled";
+			};
+		};
+	};
+};

arch/arm/boot/dts/spear3xx.dtsi

@@ -0,0 +1,150 @@
+/*
+ * DTS file for all SPEAr3xx SoCs
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&vic>;
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,arm926ejs";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x40000000>;
+	};
+
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0xd0000000 0xd0000000 0x30000000>;
+
+		vic: interrupt-controller@f1100000 {
+			compatible = "arm,pl190-vic";
+			interrupt-controller;
+			reg = <0xf1100000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		dma@fc400000 {
+			compatible = "arm,pl080", "arm,primecell";
+			reg = <0xfc400000 0x1000>;
+			interrupt-parent = <&vic>;
+			interrupts = <8>;
+			status = "disabled";
+		};
+
+		gmac: eth@e0800000 {
+			compatible = "st,spear600-gmac";
+			reg = <0xe0800000 0x8000>;
+			interrupts = <23 22>;
+			interrupt-names = "macirq", "eth_wake_irq";
+			status = "disabled";
+		};
+
+		smi: flash@fc000000 {
+			compatible = "st,spear600-smi";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xfc000000 0x1000>;
+			interrupts = <9>;
+			status = "disabled";
+		};
+
+		spi0: spi@d0100000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0xd0100000 0x1000>;
+			interrupts = <20>;
+			status = "disabled";
+		};
+
+		ehci@e1800000 {
+			compatible = "st,spear600-ehci", "usb-ehci";
+			reg = <0xe1800000 0x1000>;
+			interrupts = <26>;
+			status = "disabled";
+		};
+
+		ohci@e1900000 {
+			compatible = "st,spear600-ohci", "usb-ohci";
+			reg = <0xe1900000 0x1000>;
+			interrupts = <25>;
+			status = "disabled";
+		};
+
+		ohci@e2100000 {
+			compatible = "st,spear600-ohci", "usb-ohci";
+			reg = <0xe2100000 0x1000>;
+			interrupts = <27>;
+			status = "disabled";
+		};
+
+		apb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0xd0000000 0xd0000000 0x30000000>;
+
+			gpio0: gpio@fc980000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xfc980000 0x1000>;
+				interrupts = <11>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@d0180000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0xd0180000 0x1000>;
+				interrupts = <21>;
+				status = "disabled";
+			};
+
+			rtc@fc900000 {
+				compatible = "st,spear-rtc";
+				reg = <0xfc900000 0x1000>;
+				interrupts = <10>;
+				status = "disabled";
+			};
+
+			serial@d0000000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xd0000000 0x1000>;
+				interrupts = <19>;
+				status = "disabled";
+			};
+
+			wdt@fc880000 {
+				compatible = "arm,sp805", "arm,primecell";
+				reg = <0xfc880000 0x1000>;
+				interrupts = <12>;
+				status = "disabled";
+			};
+
+			timer@f0000000 {
+				compatible = "st,spear-timer";
+				reg = <0xf0000000 0x400>;
+				interrupts = <2>;
+			};
+		};
+	};
+};

arch/arm/boot/dts/spear600-evb.dts

@@ -24,11 +24,44 @@
 	};
 
 	ahb {
+		dma@fc400000 {
+			status = "okay";
+		};
+
 		gmac: ethernet@e0800000 {
 			phy-mode = "gmii";
 			status = "okay";
 		};
 
+		smi: flash@fc000000 {
+			status = "okay";
+			clock-rate=<50000000>;
+
+			flash@f8000000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xf8000000 0x800000>;
+				st,smi-fast-mode;
+
+				partition@0 {
+					label = "xloader";
+					reg = <0x0 0x10000>;
+				};
+				partition@10000 {
+					label = "u-boot";
+					reg = <0x10000 0x40000>;
+				};
+				partition@50000 {
+					label = "linux";
+					reg = <0x50000 0x2c0000>;
+				};
+				partition@310000 {
+					label = "rootfs";
+					reg = <0x310000 0x4f0000>;
+				};
+			};
+		};
+
 		apb {
 			serial@d0000000 {
 				status = "okay";

arch/arm/boot/dts/spear600.dtsi

@@ -45,6 +45,14 @@
 			#interrupt-cells = <1>;
 		};
 
+		dma@fc400000 {
+			compatible = "arm,pl080", "arm,primecell";
+			reg = <0xfc400000 0x1000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <10>;
+			status = "disabled";
+		};
+
 		gmac: ethernet@e0800000 {
 			compatible = "st,spear600-gmac";
 			reg = <0xe0800000 0x8000>;
@@ -169,6 +177,12 @@
 				interrupts = <28>;
 				status = "disabled";
 			};
+
+			timer@f0000000 {
+				compatible = "st,spear-timer";
+				reg = <0xf0000000 0x400>;
+				interrupts = <16>;
+			};
 		};
 	};
 };

arch/arm/configs/spear13xx_defconfig

@@ -0,0 +1,95 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_PLAT_SPEAR=y
+CONFIG_ARCH_SPEAR13XX=y
+CONFIG_MACH_SPEAR1310=y
+CONFIG_MACH_SPEAR1340=y
+# CONFIG_SWP_EMULATE is not set
+CONFIG_SMP=y
+# CONFIG_SMP_ON_UP is not set
+# CONFIG_ARM_CPU_TOPOLOGY is not set
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_BINFMT_MISC=y
+CONFIG_NET=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_FSMC=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_ATA=y
+# CONFIG_SATA_PMP is not set
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_PATA_ARASAN_CF=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+CONFIG_STMMAC_ETH=y
+# CONFIG_WLAN is not set
+CONFIG_INPUT_FF_MEMLESS=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_SPEAR=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=8192
+CONFIG_I2C=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_SPI=y
+CONFIG_SPI_PL022=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_PL061=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_MPCORE_WATCHDOG=y
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SPEAR=y
+CONFIG_RTC_CLASS=y
+CONFIG_DMADEVICES=y
+CONFIG_DW_DMAC=y
+CONFIG_DMATEST=m
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=m
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_INFO=y

arch/arm/configs/spear3xx_defconfig

@@ -2,33 +2,70 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
+CONFIG_PARTITION_ADVANCED=y
 CONFIG_PLAT_SPEAR=y
-CONFIG_BOARD_SPEAR300_EVB=y
-CONFIG_BOARD_SPEAR310_EVB=y
-CONFIG_BOARD_SPEAR320_EVB=y
+CONFIG_MACH_SPEAR300=y
+CONFIG_MACH_SPEAR310=y
+CONFIG_MACH_SPEAR320=y
 CONFIG_BINFMT_MISC=y
+CONFIG_NET=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_FSMC=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+CONFIG_STMMAC_ETH=y
+# CONFIG_WLAN is not set
 CONFIG_INPUT_FF_MEMLESS=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_SPEAR=y
 # CONFIG_INPUT_MOUSE is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=8192
+CONFIG_I2C=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_SPI=y
+CONFIG_SPI_PL022=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_PL061=y
 # CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_ARM_SP805_WATCHDOG=y
+CONFIG_FB=y
+CONFIG_FB_ARMCLCD=y
 # CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SPEAR=y
+CONFIG_RTC_CLASS=y
+CONFIG_DMADEVICES=y
+CONFIG_AMBA_PL08X=y
+CONFIG_DMATEST=m
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_SECURITY=y
@@ -39,8 +76,7 @@ CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
 CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
 CONFIG_TMPFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS=y
+CONFIG_JFFS2_FS=y
 CONFIG_NLS_DEFAULT="utf8"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=m
@@ -48,6 +84,4 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_CRC32 is not set

arch/arm/configs/spear6xx_defconfig

@@ -2,29 +2,60 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
+CONFIG_PARTITION_ADVANCED=y
 CONFIG_PLAT_SPEAR=y
 CONFIG_ARCH_SPEAR6XX=y
-CONFIG_BOARD_SPEAR600_EVB=y
 CONFIG_BINFMT_MISC=y
+CONFIG_NET=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_FSMC=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+CONFIG_STMMAC_ETH=y
+# CONFIG_WLAN is not set
 CONFIG_INPUT_FF_MEMLESS=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=8192
+CONFIG_I2C=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_SPI=y
+CONFIG_SPI_PL022=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_PL061=y
 # CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_ARM_SP805_WATCHDOG=y
 # CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_RTC_CLASS=y
+CONFIG_DMADEVICES=y
+CONFIG_AMBA_PL08X=y
+CONFIG_DMATEST=m
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_SECURITY=y
@@ -35,8 +66,7 @@ CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
 CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
 CONFIG_TMPFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS=y
+CONFIG_JFFS2_FS=y
 CONFIG_NLS_DEFAULT="utf8"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=m
@@ -44,6 +74,4 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_CRC32 is not set

arch/arm/mach-spear13xx/Kconfig

@@ -0,0 +1,20 @@
+#
+# SPEAr13XX Machine configuration file
+#
+
+if ARCH_SPEAR13XX
+
+menu "SPEAr13xx Implementations"
+config MACH_SPEAR1310
+	bool "SPEAr1310 Machine support with Device Tree"
+	select PINCTRL_SPEAR1310
+	help
+	  Supports ST SPEAr1310 machine configured via the device-tree
+
+config MACH_SPEAR1340
+	bool "SPEAr1340 Machine support with Device Tree"
+	select PINCTRL_SPEAR1340
+	help
+	  Supports ST SPEAr1340 machine configured via the device-tree
+endmenu
+endif #ARCH_SPEAR13XX

arch/arm/mach-spear13xx/Makefile

@@ -0,0 +1,10 @@
+#
+# Makefile for SPEAr13XX machine series
+#
+
+obj-$(CONFIG_SMP)		+= headsmp.o platsmp.o
+obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
+
+obj-$(CONFIG_ARCH_SPEAR13XX)	+= spear13xx.o
+obj-$(CONFIG_MACH_SPEAR1310)	+= spear1310.o
+obj-$(CONFIG_MACH_SPEAR1340)	+= spear1340.o

arch/arm/mach-spear13xx/Makefile.boot

@@ -0,0 +1,6 @@
+zreladdr-y	+= 0x00008000
+params_phys-y	:= 0x00000100
+initrd_phys-y	:= 0x00800000
+
+dtb-$(CONFIG_MACH_SPEAR1310)	+= spear1310-evb.dtb
+dtb-$(CONFIG_MACH_SPEAR1340)	+= spear1340-evb.dtb

arch/arm/mach-spear13xx/headsmp.S

@@ -0,0 +1,47 @@
+/*
+ * arch/arm/mach-spear13XX/headsmp.S
+ *
+ * Picked from realview
+ * Copyright (c) 2012 ST Microelectronics Limited
+ * Shiraz Hashim <shiraz.hashim@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+	__INIT
+
+/*
+ * spear13xx specific entry point for secondary CPUs. This provides
+ * a "holding pen" into which all secondary cores are held until we're
+ * ready for them to initialise.
+ */
+ENTRY(spear13xx_secondary_startup)
+	mrc	p15, 0, r0, c0, c0, 5
+	and	r0, r0, #15
+	adr	r4, 1f
+	ldmia	r4, {r5, r6}
+	sub	r4, r4, r5
+	add	r6, r6, r4
+pen:	ldr	r7, [r6]
+	cmp	r7, r0
+	bne	pen
+
+	/* re-enable coherency */
+	mrc	p15, 0, r0, c1, c0, 1
+	orr	r0, r0, #(1 << 6) | (1 << 0)
+	mcr	p15, 0, r0, c1, c0, 1
+	/*
+	 * we've been released from the holding pen: secondary_stack
+	 * should now contain the SVC stack for this core
+	 */
+	b	secondary_startup
+
+	.align
+1:	.long	.
+	.long	pen_release
+ENDPROC(spear13xx_secondary_startup)

arch/arm/mach-spear13xx/hotplug.c

@@ -0,0 +1,119 @@
+/*
+ * linux/arch/arm/mach-spear13xx/hotplug.c
+ *
+ * Copyright (C) 2012 ST Microelectronics Ltd.
+ * Deepak Sikri <deepak.sikri@st.com>
+ *
+ * based upon linux/arch/arm/mach-realview/hotplug.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/smp.h>
+#include <asm/cacheflush.h>
+#include <asm/cp15.h>
+#include <asm/smp_plat.h>
+
+extern volatile int pen_release;
+
+static inline void cpu_enter_lowpower(void)
+{
+	unsigned int v;
+
+	flush_cache_all();
+	asm volatile(
+	"	mcr	p15, 0, %1, c7, c5, 0\n"
+	"	dsb\n"
+	/*
+	 * Turn off coherency
+	 */
+	"	mrc	p15, 0, %0, c1, c0, 1\n"
+	"	bic	%0, %0, #0x20\n"
+	"	mcr	p15, 0, %0, c1, c0, 1\n"
+	"	mrc	p15, 0, %0, c1, c0, 0\n"
+	"	bic	%0, %0, %2\n"
+	"	mcr	p15, 0, %0, c1, c0, 0\n"
+	: "=&r" (v)
+	: "r" (0), "Ir" (CR_C)
+	: "cc", "memory");
+}
+
+static inline void cpu_leave_lowpower(void)
+{
+	unsigned int v;
+
+	asm volatile("mrc	p15, 0, %0, c1, c0, 0\n"
+	"	orr	%0, %0, %1\n"
+	"	mcr	p15, 0, %0, c1, c0, 0\n"
+	"	mrc	p15, 0, %0, c1, c0, 1\n"
+	"	orr	%0, %0, #0x20\n"
+	"	mcr	p15, 0, %0, c1, c0, 1\n"
+	: "=&r" (v)
+	: "Ir" (CR_C)
+	: "cc");
+}
+
+static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
+{
+	for (;;) {
+		wfi();
+
+		if (pen_release == cpu) {
+			/*
+			 * OK, proper wakeup, we're done
+			 */
+			break;
+		}
+
+		/*
+		 * Getting here, means that we have come out of WFI without
+		 * having been woken up - this shouldn't happen
+		 *
+		 * Just note it happening - when we're woken, we can report
+		 * its occurrence.
+		 */
+		(*spurious)++;
+	}
+}
+
+int platform_cpu_kill(unsigned int cpu)
+{
+	return 1;
+}
+
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+void __cpuinit platform_cpu_die(unsigned int cpu)
+{
+	int spurious = 0;
+
+	/*
+	 * we're ready for shutdown now, so do it
+	 */
+	cpu_enter_lowpower();
+	platform_do_lowpower(cpu, &spurious);
+
+	/*
+	 * bring this CPU back into the world of cache
+	 * coherency, and then restore interrupts
+	 */
+	cpu_leave_lowpower();
+
+	if (spurious)
+		pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
+}
+
+int platform_cpu_disable(unsigned int cpu)
+{
+	/*
+	 * we don't allow CPU 0 to be shutdown (it is still too special
+	 * e.g. clock tick interrupts)
+	 */
+	return cpu == 0 ? -EPERM : 0;
+}

arch/arm/mach-spear13xx/include/mach/debug-macro.S

@@ -0,0 +1,14 @@
+/*
+ * arch/arm/mach-spear13xx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header spear13xx machine family
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <plat/debug-macro.S>

arch/arm/mach-spear13xx/include/mach/dma.h

@@ -0,0 +1,128 @@
+/*
+ * arch/arm/mach-spear13xx/include/mach/dma.h
+ *
+ * DMA information for SPEAr13xx machine family
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_DMA_H
+#define __MACH_DMA_H
+
+/* request id of all the peripherals */
+enum dma_master_info {
+	/* Accessible from only one master */
+	DMA_MASTER_MCIF = 0,
+	DMA_MASTER_FSMC = 1,
+	/* Accessible from both 0 & 1 */
+	DMA_MASTER_MEMORY = 0,
+	DMA_MASTER_ADC = 0,
+	DMA_MASTER_UART0 = 0,
+	DMA_MASTER_SSP0 = 0,
+	DMA_MASTER_I2C0 = 0,
+
+#ifdef CONFIG_MACH_SPEAR1310
+	/* Accessible from only one master */
+	SPEAR1310_DMA_MASTER_JPEG = 1,
+
+	/* Accessible from both 0 & 1 */
+	SPEAR1310_DMA_MASTER_I2S = 0,
+	SPEAR1310_DMA_MASTER_UART1 = 0,
+	SPEAR1310_DMA_MASTER_UART2 = 0,
+	SPEAR1310_DMA_MASTER_UART3 = 0,
+	SPEAR1310_DMA_MASTER_UART4 = 0,
+	SPEAR1310_DMA_MASTER_UART5 = 0,
+	SPEAR1310_DMA_MASTER_I2C1 = 0,
+	SPEAR1310_DMA_MASTER_I2C2 = 0,
+	SPEAR1310_DMA_MASTER_I2C3 = 0,
+	SPEAR1310_DMA_MASTER_I2C4 = 0,
+	SPEAR1310_DMA_MASTER_I2C5 = 0,
+	SPEAR1310_DMA_MASTER_I2C6 = 0,
+	SPEAR1310_DMA_MASTER_I2C7 = 0,
+	SPEAR1310_DMA_MASTER_SSP1 = 0,
+#endif
+
+#ifdef CONFIG_MACH_SPEAR1340
+	/* Accessible from only one master */
+	SPEAR1340_DMA_MASTER_I2S_PLAY = 1,
+	SPEAR1340_DMA_MASTER_I2S_REC = 1,
+	SPEAR1340_DMA_MASTER_I2C1 = 1,
+	SPEAR1340_DMA_MASTER_UART1 = 1,
+
+	/* following are accessible from both master 0 & 1 */
+	SPEAR1340_DMA_MASTER_SPDIF = 0,
+	SPEAR1340_DMA_MASTER_CAM = 1,
+	SPEAR1340_DMA_MASTER_VIDEO_IN = 0,
+	SPEAR1340_DMA_MASTER_MALI = 0,
+#endif
+};
+
+enum request_id {
+	DMA_REQ_ADC = 0,
+	DMA_REQ_SSP0_TX = 4,
+	DMA_REQ_SSP0_RX = 5,
+	DMA_REQ_UART0_TX = 6,
+	DMA_REQ_UART0_RX = 7,
+	DMA_REQ_I2C0_TX = 8,
+	DMA_REQ_I2C0_RX = 9,
+
+#ifdef CONFIG_MACH_SPEAR1310
+	SPEAR1310_DMA_REQ_FROM_JPEG = 2,
+	SPEAR1310_DMA_REQ_TO_JPEG = 3,
+	SPEAR1310_DMA_REQ_I2S_TX = 10,
+	SPEAR1310_DMA_REQ_I2S_RX = 11,
+
+	SPEAR1310_DMA_REQ_I2C1_RX = 0,
+	SPEAR1310_DMA_REQ_I2C1_TX = 1,
+	SPEAR1310_DMA_REQ_I2C2_RX = 2,
+	SPEAR1310_DMA_REQ_I2C2_TX = 3,
+	SPEAR1310_DMA_REQ_I2C3_RX = 4,
+	SPEAR1310_DMA_REQ_I2C3_TX = 5,
+	SPEAR1310_DMA_REQ_I2C4_RX = 6,
+	SPEAR1310_DMA_REQ_I2C4_TX = 7,
+	SPEAR1310_DMA_REQ_I2C5_RX = 8,
+	SPEAR1310_DMA_REQ_I2C5_TX = 9,
+	SPEAR1310_DMA_REQ_I2C6_RX = 10,
+	SPEAR1310_DMA_REQ_I2C6_TX = 11,
+	SPEAR1310_DMA_REQ_UART1_RX = 12,
+	SPEAR1310_DMA_REQ_UART1_TX = 13,
+	SPEAR1310_DMA_REQ_UART2_RX = 14,
+	SPEAR1310_DMA_REQ_UART2_TX = 15,
+	SPEAR1310_DMA_REQ_UART5_RX = 16,
+	SPEAR1310_DMA_REQ_UART5_TX = 17,
+	SPEAR1310_DMA_REQ_SSP1_RX = 18,
+	SPEAR1310_DMA_REQ_SSP1_TX = 19,
+	SPEAR1310_DMA_REQ_I2C7_RX = 20,
+	SPEAR1310_DMA_REQ_I2C7_TX = 21,
+	SPEAR1310_DMA_REQ_UART3_RX = 28,
+	SPEAR1310_DMA_REQ_UART3_TX = 29,
+	SPEAR1310_DMA_REQ_UART4_RX = 30,
+	SPEAR1310_DMA_REQ_UART4_TX = 31,
+#endif
+
+#ifdef CONFIG_MACH_SPEAR1340
+	SPEAR1340_DMA_REQ_SPDIF_TX = 2,
+	SPEAR1340_DMA_REQ_SPDIF_RX = 3,
+	SPEAR1340_DMA_REQ_I2S_TX = 10,
+	SPEAR1340_DMA_REQ_I2S_RX = 11,
+	SPEAR1340_DMA_REQ_UART1_TX = 12,
+	SPEAR1340_DMA_REQ_UART1_RX = 13,
+	SPEAR1340_DMA_REQ_I2C1_TX = 14,
+	SPEAR1340_DMA_REQ_I2C1_RX = 15,
+	SPEAR1340_DMA_REQ_CAM0_EVEN = 0,
+	SPEAR1340_DMA_REQ_CAM0_ODD = 1,
+	SPEAR1340_DMA_REQ_CAM1_EVEN = 2,
+	SPEAR1340_DMA_REQ_CAM1_ODD = 3,
+	SPEAR1340_DMA_REQ_CAM2_EVEN = 4,
+	SPEAR1340_DMA_REQ_CAM2_ODD = 5,
+	SPEAR1340_DMA_REQ_CAM3_EVEN = 6,
+	SPEAR1340_DMA_REQ_CAM3_ODD = 7,
+#endif
+};
+
+#endif /* __MACH_DMA_H */

arch/arm/mach-spear13xx/include/mach/generic.h

@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-spear13xx/include/mach/generic.h
+ *
+ * spear13xx machine family generic header file
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_GENERIC_H
+#define __MACH_GENERIC_H
+
+#include <linux/dmaengine.h>
+#include <asm/mach/time.h>
+
+/* Add spear13xx structure declarations here */
+extern struct sys_timer spear13xx_timer;
+extern struct pl022_ssp_controller pl022_plat_data;
+extern struct dw_dma_platform_data dmac_plat_data;
+extern struct dw_dma_slave cf_dma_priv;
+extern struct dw_dma_slave nand_read_dma_priv;
+extern struct dw_dma_slave nand_write_dma_priv;
+
+/* Add spear13xx family function declarations here */
+void __init spear_setup_of_timer(void);
+void __init spear13xx_map_io(void);
+void __init spear13xx_dt_init_irq(void);
+void __init spear13xx_l2x0_init(void);
+bool dw_dma_filter(struct dma_chan *chan, void *slave);
+void spear_restart(char, const char *);
+void spear13xx_secondary_startup(void);
+
+#ifdef CONFIG_MACH_SPEAR1310
+void __init spear1310_clk_init(void);
+#else
+static inline void spear1310_clk_init(void) {}
+#endif
+
+#ifdef CONFIG_MACH_SPEAR1340
+void __init spear1340_clk_init(void);
+#else
+static inline void spear1340_clk_init(void) {}
+#endif
+
+#endif /* __MACH_GENERIC_H */

arch/arm/mach-spear13xx/include/mach/gpio.h

@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear13xx/include/mach/gpio.h
+ *
+ * GPIO macros for SPEAr13xx machine family
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_GPIO_H
+#define __MACH_GPIO_H
+
+#include <plat/gpio.h>
+
+#endif /* __MACH_GPIO_H */

arch/arm/mach-spear13xx/include/mach/hardware.h

@@ -0,0 +1 @@
+/* empty */

arch/arm/mach-spear13xx/include/mach/irqs.h

@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-spear13xx/include/mach/irqs.h
+ *
+ * IRQ helper macros for spear13xx machine family
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_IRQS_H
+#define __MACH_IRQS_H
+
+#define IRQ_GIC_END			160
+#define NR_IRQS				IRQ_GIC_END
+
+#endif /* __MACH_IRQS_H */

arch/arm/mach-spear13xx/include/mach/spear.h

@@ -0,0 +1,62 @@
+/*
+ * arch/arm/mach-spear13xx/include/mach/spear.h
+ *
+ * spear13xx Machine family specific definition
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_SPEAR13XX_H
+#define __MACH_SPEAR13XX_H
+
+#include <asm/memory.h>
+
+#define PERIP_GRP2_BASE				UL(0xB3000000)
+#define VA_PERIP_GRP2_BASE			UL(0xFE000000)
+#define MCIF_SDHCI_BASE				UL(0xB3000000)
+#define SYSRAM0_BASE				UL(0xB3800000)
+#define VA_SYSRAM0_BASE				UL(0xFE800000)
+#define SYS_LOCATION				(VA_SYSRAM0_BASE + 0x600)
+
+#define PERIP_GRP1_BASE				UL(0xE0000000)
+#define VA_PERIP_GRP1_BASE			UL(0xFD000000)
+#define UART_BASE				UL(0xE0000000)
+#define VA_UART_BASE				UL(0xFD000000)
+#define SSP_BASE				UL(0xE0100000)
+#define MISC_BASE				UL(0xE0700000)
+#define VA_MISC_BASE				IOMEM(UL(0xFD700000))
+
+#define A9SM_AND_MPMC_BASE			UL(0xEC000000)
+#define VA_A9SM_AND_MPMC_BASE			UL(0xFC000000)
+
+/* A9SM peripheral offsets */
+#define A9SM_PERIP_BASE				UL(0xEC800000)
+#define VA_A9SM_PERIP_BASE			UL(0xFC800000)
+#define VA_SCU_BASE				(VA_A9SM_PERIP_BASE + 0x00)
+
+#define L2CC_BASE				UL(0xED000000)
+#define VA_L2CC_BASE				IOMEM(UL(0xFB000000))
+
+/* others */
+#define DMAC0_BASE				UL(0xEA800000)
+#define DMAC1_BASE				UL(0xEB000000)
+#define MCIF_CF_BASE				UL(0xB2800000)
+
+/* Devices present in SPEAr1310 */
+#ifdef CONFIG_MACH_SPEAR1310
+#define SPEAR1310_RAS_GRP1_BASE			UL(0xD8000000)
+#define VA_SPEAR1310_RAS_GRP1_BASE		UL(0xFA000000)
+#define SPEAR1310_RAS_BASE			UL(0xD8400000)
+#define VA_SPEAR1310_RAS_BASE			IOMEM(UL(0xFA400000))
+#endif /* CONFIG_MACH_SPEAR1310 */
+
+/* Debug uart for linux, will be used for debug and uncompress messages */
+#define SPEAR_DBG_UART_BASE			UART_BASE
+#define VA_SPEAR_DBG_UART_BASE			VA_UART_BASE
+
+#endif /* __MACH_SPEAR13XX_H */

arch/arm/mach-spear13xx/include/mach/timex.h

@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/timex.h
+ *
+ * SPEAr3XX machine family specific timex definitions
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_TIMEX_H
+#define __MACH_TIMEX_H
+
+#include <plat/timex.h>
+
+#endif /* __MACH_TIMEX_H */

arch/arm/mach-spear13xx/include/mach/uncompress.h

@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear13xx/include/mach/uncompress.h
+ *
+ * Serial port stubs for kernel decompress status messages
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_UNCOMPRESS_H
+#define __MACH_UNCOMPRESS_H
+
+#include <plat/uncompress.h>
+
+#endif /* __MACH_UNCOMPRESS_H */

arch/arm/mach-spear13xx/platsmp.c

@@ -0,0 +1,127 @@
+/*
+ * arch/arm/mach-spear13xx/platsmp.c
+ *
+ * based upon linux/arch/arm/mach-realview/platsmp.c
+ *
+ * Copyright (C) 2012 ST Microelectronics Ltd.
+ * Shiraz Hashim <shiraz.hashim@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/io.h>
+#include <linux/smp.h>
+#include <asm/cacheflush.h>
+#include <asm/hardware/gic.h>
+#include <asm/smp_scu.h>
+#include <mach/spear.h>
+
+/*
+ * control for which core is the next to come out of the secondary
+ * boot "holding pen"
+ */
+volatile int __cpuinitdata pen_release = -1;
+static DEFINE_SPINLOCK(boot_lock);
+
+static void __iomem *scu_base = IOMEM(VA_SCU_BASE);
+extern void spear13xx_secondary_startup(void);
+
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+	/*
+	 * if any interrupts are already enabled for the primary
+	 * core (e.g. timer irq), then they will not have been enabled
+	 * for us: do so
+	 */
+	gic_secondary_init(0);
+
+	/*
+	 * let the primary processor know we're out of the
+	 * pen, then head off into the C entry point
+	 */
+	pen_release = -1;
+	smp_wmb();
+
+	/*
+	 * Synchronise with the boot thread.
+	 */
+	spin_lock(&boot_lock);
+	spin_unlock(&boot_lock);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	unsigned long timeout;
+
+	/*
+	 * set synchronisation state between this boot processor
+	 * and the secondary one
+	 */
+	spin_lock(&boot_lock);
+
+	/*
+	 * The secondary processor is waiting to be released from
+	 * the holding pen - release it, then wait for it to flag
+	 * that it has been released by resetting pen_release.
+	 *
+	 * Note that "pen_release" is the hardware CPU ID, whereas
+	 * "cpu" is Linux's internal ID.
+	 */
+	pen_release = cpu;
+	flush_cache_all();
+	outer_flush_all();
+
+	timeout = jiffies + (1 * HZ);
+	while (time_before(jiffies, timeout)) {
+		smp_rmb();
+		if (pen_release == -1)
+			break;
+
+		udelay(10);
+	}
+
+	/*
+	 * now the secondary core is starting up let it run its
+	 * calibrations, then wait for it to finish
+	 */
+	spin_unlock(&boot_lock);
+
+	return pen_release != -1 ? -ENOSYS : 0;
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+void __init smp_init_cpus(void)
+{
+	unsigned int i, ncores = scu_get_core_count(scu_base);
+
+	if (ncores > nr_cpu_ids) {
+		pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
+			ncores, nr_cpu_ids);
+		ncores = nr_cpu_ids;
+	}
+
+	for (i = 0; i < ncores; i++)
+		set_cpu_possible(i, true);
+
+	set_smp_cross_call(gic_raise_softirq);
+}
+
+void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+{
+
+	scu_enable(scu_base);
+
+	/*
+	 * Write the address of secondary startup into the system-wide location
+	 * (presently it is in SRAM). The BootMonitor waits until it receives a
+	 * soft interrupt, and then the secondary CPU branches to this address.
+	 */
+	__raw_writel(virt_to_phys(spear13xx_secondary_startup), SYS_LOCATION);
+}

arch/arm/mach-spear13xx/spear1310.c

@@ -0,0 +1,88 @@
+/*
+ * arch/arm/mach-spear13xx/spear1310.c
+ *
+ * SPEAr1310 machine source file
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define pr_fmt(fmt) "SPEAr1310: " fmt
+
+#include <linux/amba/pl022.h>
+#include <linux/of_platform.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+
+/* Base addresses */
+#define SPEAR1310_SSP1_BASE			UL(0x5D400000)
+#define SPEAR1310_SATA0_BASE			UL(0xB1000000)
+#define SPEAR1310_SATA1_BASE			UL(0xB1800000)
+#define SPEAR1310_SATA2_BASE			UL(0xB4000000)
+
+/* ssp device registration */
+static struct pl022_ssp_controller ssp1_plat_data = {
+	.bus_id = 0,
+	.enable_dma = 0,
+	.num_chipselect = 3,
+};
+
+/* Add SPEAr1310 auxdata to pass platform data */
+static struct of_dev_auxdata spear1310_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("arasan,cf-spear1340", MCIF_CF_BASE, NULL, &cf_dma_priv),
+	OF_DEV_AUXDATA("snps,dma-spear1340", DMAC0_BASE, NULL, &dmac_plat_data),
+	OF_DEV_AUXDATA("snps,dma-spear1340", DMAC1_BASE, NULL, &dmac_plat_data),
+	OF_DEV_AUXDATA("arm,pl022", SSP_BASE, NULL, &pl022_plat_data),
+
+	OF_DEV_AUXDATA("arm,pl022", SPEAR1310_SSP1_BASE, NULL, &ssp1_plat_data),
+	{}
+};
+
+static void __init spear1310_dt_init(void)
+{
+	of_platform_populate(NULL, of_default_bus_match_table,
+			spear1310_auxdata_lookup, NULL);
+}
+
+static const char * const spear1310_dt_board_compat[] = {
+	"st,spear1310",
+	"st,spear1310-evb",
+	NULL,
+};
+
+/*
+ * Following will create 16MB static virtual/physical mappings
+ * PHYSICAL		VIRTUAL
+ * 0xD8000000		0xFA000000
+ */
+struct map_desc spear1310_io_desc[] __initdata = {
+	{
+		.virtual	= VA_SPEAR1310_RAS_GRP1_BASE,
+		.pfn		= __phys_to_pfn(SPEAR1310_RAS_GRP1_BASE),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	},
+};
+
+static void __init spear1310_map_io(void)
+{
+	iotable_init(spear1310_io_desc, ARRAY_SIZE(spear1310_io_desc));
+	spear13xx_map_io();
+}
+
+DT_MACHINE_START(SPEAR1310_DT, "ST SPEAr1310 SoC with Flattened Device Tree")
+	.map_io		=	spear1310_map_io,
+	.init_irq	=	spear13xx_dt_init_irq,
+	.handle_irq	=	gic_handle_irq,
+	.timer		=	&spear13xx_timer,
+	.init_machine	=	spear1310_dt_init,
+	.restart	=	spear_restart,
+	.dt_compat	=	spear1310_dt_board_compat,
+MACHINE_END

arch/arm/mach-spear13xx/spear1340.c

@@ -0,0 +1,192 @@
+/*
+ * arch/arm/mach-spear13xx/spear1340.c
+ *
+ * SPEAr1340 machine source file
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define pr_fmt(fmt) "SPEAr1340: " fmt
+
+#include <linux/ahci_platform.h>
+#include <linux/amba/serial.h>
+#include <linux/delay.h>
+#include <linux/dw_dmac.h>
+#include <linux/of_platform.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/arch.h>
+#include <mach/dma.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+
+/* Base addresses */
+#define SPEAR1340_SATA_BASE			UL(0xB1000000)
+#define SPEAR1340_UART1_BASE			UL(0xB4100000)
+
+/* Power Management Registers */
+#define SPEAR1340_PCM_CFG			(VA_MISC_BASE + 0x100)
+#define SPEAR1340_PCM_WKUP_CFG			(VA_MISC_BASE + 0x104)
+#define SPEAR1340_SWITCH_CTR			(VA_MISC_BASE + 0x108)
+
+#define SPEAR1340_PERIP1_SW_RST			(VA_MISC_BASE + 0x318)
+#define SPEAR1340_PERIP2_SW_RST			(VA_MISC_BASE + 0x31C)
+#define SPEAR1340_PERIP3_SW_RST			(VA_MISC_BASE + 0x320)
+
+/* PCIE - SATA configuration registers */
+#define SPEAR1340_PCIE_SATA_CFG			(VA_MISC_BASE + 0x424)
+	/* PCIE CFG MASks */
+	#define SPEAR1340_PCIE_CFG_DEVICE_PRESENT	(1 << 11)
+	#define SPEAR1340_PCIE_CFG_POWERUP_RESET	(1 << 10)
+	#define SPEAR1340_PCIE_CFG_CORE_CLK_EN		(1 << 9)
+	#define SPEAR1340_PCIE_CFG_AUX_CLK_EN		(1 << 8)
+	#define SPEAR1340_SATA_CFG_TX_CLK_EN		(1 << 4)
+	#define SPEAR1340_SATA_CFG_RX_CLK_EN		(1 << 3)
+	#define SPEAR1340_SATA_CFG_POWERUP_RESET	(1 << 2)
+	#define SPEAR1340_SATA_CFG_PM_CLK_EN		(1 << 1)
+	#define SPEAR1340_PCIE_SATA_SEL_PCIE		(0)
+	#define SPEAR1340_PCIE_SATA_SEL_SATA		(1)
+	#define SPEAR1340_SATA_PCIE_CFG_MASK		0xF1F
+	#define SPEAR1340_PCIE_CFG_VAL	(SPEAR1340_PCIE_SATA_SEL_PCIE | \
+			SPEAR1340_PCIE_CFG_AUX_CLK_EN | \
+			SPEAR1340_PCIE_CFG_CORE_CLK_EN | \
+			SPEAR1340_PCIE_CFG_POWERUP_RESET | \
+			SPEAR1340_PCIE_CFG_DEVICE_PRESENT)
+	#define SPEAR1340_SATA_CFG_VAL	(SPEAR1340_PCIE_SATA_SEL_SATA | \
+			SPEAR1340_SATA_CFG_PM_CLK_EN | \
+			SPEAR1340_SATA_CFG_POWERUP_RESET | \
+			SPEAR1340_SATA_CFG_RX_CLK_EN | \
+			SPEAR1340_SATA_CFG_TX_CLK_EN)
+
+#define SPEAR1340_PCIE_MIPHY_CFG		(VA_MISC_BASE + 0x428)
+	#define SPEAR1340_MIPHY_OSC_BYPASS_EXT		(1 << 31)
+	#define SPEAR1340_MIPHY_CLK_REF_DIV2		(1 << 27)
+	#define SPEAR1340_MIPHY_CLK_REF_DIV4		(2 << 27)
+	#define SPEAR1340_MIPHY_CLK_REF_DIV8		(3 << 27)
+	#define SPEAR1340_MIPHY_PLL_RATIO_TOP(x)	(x << 0)
+	#define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA \
+			(SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
+			SPEAR1340_MIPHY_CLK_REF_DIV2 | \
+			SPEAR1340_MIPHY_PLL_RATIO_TOP(60))
+	#define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK \
+			(SPEAR1340_MIPHY_PLL_RATIO_TOP(120))
+	#define SPEAR1340_PCIE_SATA_MIPHY_CFG_PCIE \
+			(SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
+			SPEAR1340_MIPHY_PLL_RATIO_TOP(25))
+
+static struct dw_dma_slave uart1_dma_param[] = {
+	{
+		/* Tx */
+		.cfg_hi = DWC_CFGH_DST_PER(SPEAR1340_DMA_REQ_UART1_TX),
+		.cfg_lo = 0,
+		.src_master = DMA_MASTER_MEMORY,
+		.dst_master = SPEAR1340_DMA_MASTER_UART1,
+	}, {
+		/* Rx */
+		.cfg_hi = DWC_CFGH_SRC_PER(SPEAR1340_DMA_REQ_UART1_RX),
+		.cfg_lo = 0,
+		.src_master = SPEAR1340_DMA_MASTER_UART1,
+		.dst_master = DMA_MASTER_MEMORY,
+	}
+};
+
+static struct amba_pl011_data uart1_data = {
+	.dma_filter = dw_dma_filter,
+	.dma_tx_param = &uart1_dma_param[0],
+	.dma_rx_param = &uart1_dma_param[1],
+};
+
+/* SATA device registration */
+static int sata_miphy_init(struct device *dev, void __iomem *addr)
+{
+	writel(SPEAR1340_SATA_CFG_VAL, SPEAR1340_PCIE_SATA_CFG);
+	writel(SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK,
+			SPEAR1340_PCIE_MIPHY_CFG);
+	/* Switch on sata power domain */
+	writel((readl(SPEAR1340_PCM_CFG) | (0x800)), SPEAR1340_PCM_CFG);
+	msleep(20);
+	/* Disable PCIE SATA Controller reset */
+	writel((readl(SPEAR1340_PERIP1_SW_RST) & (~0x1000)),
+			SPEAR1340_PERIP1_SW_RST);
+	msleep(20);
+
+	return 0;
+}
+
+void sata_miphy_exit(struct device *dev)
+{
+	writel(0, SPEAR1340_PCIE_SATA_CFG);
+	writel(0, SPEAR1340_PCIE_MIPHY_CFG);
+
+	/* Enable PCIE SATA Controller reset */
+	writel((readl(SPEAR1340_PERIP1_SW_RST) | (0x1000)),
+			SPEAR1340_PERIP1_SW_RST);
+	msleep(20);
+	/* Switch off sata power domain */
+	writel((readl(SPEAR1340_PCM_CFG) & (~0x800)), SPEAR1340_PCM_CFG);
+	msleep(20);
+}
+
+int sata_suspend(struct device *dev)
+{
+	if (dev->power.power_state.event == PM_EVENT_FREEZE)
+		return 0;
+
+	sata_miphy_exit(dev);
+
+	return 0;
+}
+
+int sata_resume(struct device *dev)
+{
+	if (dev->power.power_state.event == PM_EVENT_THAW)
+		return 0;
+
+	return sata_miphy_init(dev, NULL);
+}
+
+static struct ahci_platform_data sata_pdata = {
+	.init = sata_miphy_init,
+	.exit = sata_miphy_exit,
+	.suspend = sata_suspend,
+	.resume = sata_resume,
+};
+
+/* Add SPEAr1340 auxdata to pass platform data */
+static struct of_dev_auxdata spear1340_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("arasan,cf-spear1340", MCIF_CF_BASE, NULL, &cf_dma_priv),
+	OF_DEV_AUXDATA("snps,dma-spear1340", DMAC0_BASE, NULL, &dmac_plat_data),
+	OF_DEV_AUXDATA("snps,dma-spear1340", DMAC1_BASE, NULL, &dmac_plat_data),
+	OF_DEV_AUXDATA("arm,pl022", SSP_BASE, NULL, &pl022_plat_data),
+
+	OF_DEV_AUXDATA("snps,spear-ahci", SPEAR1340_SATA_BASE, NULL,
+			&sata_pdata),
+	OF_DEV_AUXDATA("arm,pl011", SPEAR1340_UART1_BASE, NULL, &uart1_data),
+	{}
+};
+
+static void __init spear1340_dt_init(void)
+{
+	of_platform_populate(NULL, of_default_bus_match_table,
+			spear1340_auxdata_lookup, NULL);
+}
+
+static const char * const spear1340_dt_board_compat[] = {
+	"st,spear1340",
+	"st,spear1340-evb",
+	NULL,
+};
+
+DT_MACHINE_START(SPEAR1340_DT, "ST SPEAr1340 SoC with Flattened Device Tree")
+	.map_io		=	spear13xx_map_io,
+	.init_irq	=	spear13xx_dt_init_irq,
+	.handle_irq	=	gic_handle_irq,
+	.timer		=	&spear13xx_timer,
+	.init_machine	=	spear1340_dt_init,
+	.restart	=	spear_restart,
+	.dt_compat	=	spear1340_dt_board_compat,
+MACHINE_END

arch/arm/mach-spear13xx/spear13xx.c

@@ -0,0 +1,197 @@
+/*
+ * arch/arm/mach-spear13xx/spear13xx.c
+ *
+ * SPEAr13XX machines common source file
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define pr_fmt(fmt) "SPEAr13xx: " fmt
+
+#include <linux/amba/pl022.h>
+#include <linux/clk.h>
+#include <linux/dw_dmac.h>
+#include <linux/err.h>
+#include <linux/of_irq.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/map.h>
+#include <asm/smp_twd.h>
+#include <mach/dma.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+
+/* common dw_dma filter routine to be used by peripherals */
+bool dw_dma_filter(struct dma_chan *chan, void *slave)
+{
+	struct dw_dma_slave *dws = (struct dw_dma_slave *)slave;
+
+	if (chan->device->dev == dws->dma_dev) {
+		chan->private = slave;
+		return true;
+	} else {
+		return false;
+	}
+}
+
+/* ssp device registration */
+static struct dw_dma_slave ssp_dma_param[] = {
+	{
+		/* Tx */
+		.cfg_hi = DWC_CFGH_DST_PER(DMA_REQ_SSP0_TX),
+		.cfg_lo = 0,
+		.src_master = DMA_MASTER_MEMORY,
+		.dst_master = DMA_MASTER_SSP0,
+	}, {
+		/* Rx */
+		.cfg_hi = DWC_CFGH_SRC_PER(DMA_REQ_SSP0_RX),
+		.cfg_lo = 0,
+		.src_master = DMA_MASTER_SSP0,
+		.dst_master = DMA_MASTER_MEMORY,
+	}
+};
+
+struct pl022_ssp_controller pl022_plat_data = {
+	.bus_id = 0,
+	.enable_dma = 1,
+	.dma_filter = dw_dma_filter,
+	.dma_rx_param = &ssp_dma_param[1],
+	.dma_tx_param = &ssp_dma_param[0],
+	.num_chipselect = 3,
+};
+
+/* CF device registration */
+struct dw_dma_slave cf_dma_priv = {
+	.cfg_hi = 0,
+	.cfg_lo = 0,
+	.src_master = 0,
+	.dst_master = 0,
+};
+
+/* dmac device registeration */
+struct dw_dma_platform_data dmac_plat_data = {
+	.nr_channels = 8,
+	.chan_allocation_order = CHAN_ALLOCATION_DESCENDING,
+	.chan_priority = CHAN_PRIORITY_DESCENDING,
+};
+
+void __init spear13xx_l2x0_init(void)
+{
+	/*
+	 * 512KB (64KB/way), 8-way associativity, parity supported
+	 *
+	 * FIXME: 9th bit, of Auxillary Controller register must be set
+	 * for some spear13xx devices for stable L2 operation.
+	 *
+	 * Enable Early BRESP, L2 prefetch for Instruction and Data,
+	 * write alloc and 'Full line of zero' options
+	 *
+	 */
+
+	writel_relaxed(0x06, VA_L2CC_BASE + L2X0_PREFETCH_CTRL);
+
+	/*
+	 * Program following latencies in order to make
+	 * SPEAr1340 work at 600 MHz
+	 */
+	writel_relaxed(0x221, VA_L2CC_BASE + L2X0_TAG_LATENCY_CTRL);
+	writel_relaxed(0x441, VA_L2CC_BASE + L2X0_DATA_LATENCY_CTRL);
+	l2x0_init(VA_L2CC_BASE, 0x70A60001, 0xfe00ffff);
+}
+
+/*
+ * Following will create 16MB static virtual/physical mappings
+ * PHYSICAL		VIRTUAL
+ * 0xB3000000		0xFE000000
+ * 0xE0000000		0xFD000000
+ * 0xEC000000		0xFC000000
+ * 0xED000000		0xFB000000
+ */
+struct map_desc spear13xx_io_desc[] __initdata = {
+	{
+		.virtual	= VA_PERIP_GRP2_BASE,
+		.pfn		= __phys_to_pfn(PERIP_GRP2_BASE),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= VA_PERIP_GRP1_BASE,
+		.pfn		= __phys_to_pfn(PERIP_GRP1_BASE),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= VA_A9SM_AND_MPMC_BASE,
+		.pfn		= __phys_to_pfn(A9SM_AND_MPMC_BASE),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= (unsigned long)VA_L2CC_BASE,
+		.pfn		= __phys_to_pfn(L2CC_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	},
+};
+
+/* This will create static memory mapping for selected devices */
+void __init spear13xx_map_io(void)
+{
+	iotable_init(spear13xx_io_desc, ARRAY_SIZE(spear13xx_io_desc));
+}
+
+static void __init spear13xx_clk_init(void)
+{
+	if (of_machine_is_compatible("st,spear1310"))
+		spear1310_clk_init();
+	else if (of_machine_is_compatible("st,spear1340"))
+		spear1340_clk_init();
+	else
+		pr_err("%s: Unknown machine\n", __func__);
+}
+
+static void __init spear13xx_timer_init(void)
+{
+	char pclk_name[] = "osc_24m_clk";
+	struct clk *gpt_clk, *pclk;
+
+	spear13xx_clk_init();
+
+	/* get the system timer clock */
+	gpt_clk = clk_get_sys("gpt0", NULL);
+	if (IS_ERR(gpt_clk)) {
+		pr_err("%s:couldn't get clk for gpt\n", __func__);
+		BUG();
+	}
+
+	/* get the suitable parent clock for timer*/
+	pclk = clk_get(NULL, pclk_name);
+	if (IS_ERR(pclk)) {
+		pr_err("%s:couldn't get %s as parent for gpt\n", __func__,
+				pclk_name);
+		BUG();
+	}
+
+	clk_set_parent(gpt_clk, pclk);
+	clk_put(gpt_clk);
+	clk_put(pclk);
+
+	spear_setup_of_timer();
+	twd_local_timer_of_register();
+}
+
+struct sys_timer spear13xx_timer = {
+	.init = spear13xx_timer_init,
+};
+
+static const struct of_device_id gic_of_match[] __initconst = {
+	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init },
+	{ /* Sentinel */ }
+};
+
+void __init spear13xx_dt_init_irq(void)
+{
+	of_irq_init(gic_of_match);
+}

arch/arm/mach-spear3xx/Kconfig

@@ -5,39 +5,22 @@
 if ARCH_SPEAR3XX
 
 menu "SPEAr3xx Implementations"
-config BOARD_SPEAR300_EVB
-	bool "SPEAr300 Evaluation Board"
-	select MACH_SPEAR300
-	help
-	  Supports ST SPEAr300 Evaluation Board
-
-config BOARD_SPEAR310_EVB
-	bool "SPEAr310 Evaluation Board"
-	select MACH_SPEAR310
-	help
-	  Supports ST SPEAr310 Evaluation Board
-
-config BOARD_SPEAR320_EVB
-	bool "SPEAr320 Evaluation Board"
-	select MACH_SPEAR320
-	help
-	  Supports ST SPEAr320 Evaluation Board
-
-endmenu
-
 config MACH_SPEAR300
-	bool "SPEAr300"
+	bool "SPEAr300 Machine support with Device Tree"
+	select PINCTRL_SPEAR300
 	help
-	  Supports ST SPEAr300 Machine
+	  Supports ST SPEAr300 machine configured via the device-tree
 
 config MACH_SPEAR310
-	bool "SPEAr310"
+	bool "SPEAr310 Machine support with Device Tree"
+	select PINCTRL_SPEAR310
 	help
-	  Supports ST SPEAr310 Machine
+	  Supports ST SPEAr310 machine configured via the device-tree
 
 config MACH_SPEAR320
-	bool "SPEAr320"
+	bool "SPEAr320 Machine support with Device Tree"
+	select PINCTRL_SPEAR320
 	help
-	  Supports ST SPEAr320 Machine
-
+	  Supports ST SPEAr320 machine configured via the device-tree
+endmenu
 endif #ARCH_SPEAR3XX

arch/arm/mach-spear3xx/Makefile

@@ -3,24 +3,13 @@
 #
 
 # common files
-obj-y	+= spear3xx.o clock.o
+obj-$(CONFIG_ARCH_SPEAR3XX)	+= spear3xx.o
 
 # spear300 specific files
 obj-$(CONFIG_MACH_SPEAR300) += spear300.o
 
-# spear300 boards files
-obj-$(CONFIG_BOARD_SPEAR300_EVB) += spear300_evb.o
-
-
 # spear310 specific files
 obj-$(CONFIG_MACH_SPEAR310) += spear310.o
 
-# spear310 boards files
-obj-$(CONFIG_BOARD_SPEAR310_EVB) += spear310_evb.o
-
-
 # spear320 specific files
 obj-$(CONFIG_MACH_SPEAR320) += spear320.o
-
-# spear320 boards files
-obj-$(CONFIG_BOARD_SPEAR320_EVB) += spear320_evb.o

arch/arm/mach-spear3xx/Makefile.boot

@@ -1,3 +1,7 @@
 zreladdr-y	+= 0x00008000
 params_phys-y	:= 0x00000100
 initrd_phys-y	:= 0x00800000
+
+dtb-$(CONFIG_MACH_SPEAR300)	+= spear300-evb.dtb
+dtb-$(CONFIG_MACH_SPEAR310)	+= spear310-evb.dtb
+dtb-$(CONFIG_MACH_SPEAR320)	+= spear320-evb.dtb

arch/arm/mach-spear3xx/clock.c

@@ -1,760 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/clock.c
- *
- * SPEAr3xx machines clock framework source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <asm/mach-types.h>
-#include <plat/clock.h>
-#include <mach/misc_regs.h>
-
-/* root clks */
-/* 32 KHz oscillator clock */
-static struct clk osc_32k_clk = {
-	.flags = ALWAYS_ENABLED,
-	.rate = 32000,
-};
-
-/* 24 MHz oscillator clock */
-static struct clk osc_24m_clk = {
-	.flags = ALWAYS_ENABLED,
-	.rate = 24000000,
-};
-
-/* clock derived from 32 KHz osc clk */
-/* rtc clock */
-static struct clk rtc_clk = {
-	.pclk = &osc_32k_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = RTC_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* clock derived from 24 MHz osc clk */
-/* pll masks structure */
-static struct pll_clk_masks pll1_masks = {
-	.mode_mask = PLL_MODE_MASK,
-	.mode_shift = PLL_MODE_SHIFT,
-	.norm_fdbk_m_mask = PLL_NORM_FDBK_M_MASK,
-	.norm_fdbk_m_shift = PLL_NORM_FDBK_M_SHIFT,
-	.dith_fdbk_m_mask = PLL_DITH_FDBK_M_MASK,
-	.dith_fdbk_m_shift = PLL_DITH_FDBK_M_SHIFT,
-	.div_p_mask = PLL_DIV_P_MASK,
-	.div_p_shift = PLL_DIV_P_SHIFT,
-	.div_n_mask = PLL_DIV_N_MASK,
-	.div_n_shift = PLL_DIV_N_SHIFT,
-};
-
-/* pll1 configuration structure */
-static struct pll_clk_config pll1_config = {
-	.mode_reg = PLL1_CTR,
-	.cfg_reg = PLL1_FRQ,
-	.masks = &pll1_masks,
-};
-
-/* pll rate configuration table, in ascending order of rates */
-struct pll_rate_tbl pll_rtbl[] = {
-	{.mode = 0, .m = 0x85, .n = 0x0C, .p = 0x1}, /* 266 MHz */
-	{.mode = 0, .m = 0xA6, .n = 0x0C, .p = 0x1}, /* 332 MHz */
-};
-
-/* PLL1 clock */
-static struct clk pll1_clk = {
-	.flags = ENABLED_ON_INIT,
-	.pclk = &osc_24m_clk,
-	.en_reg = PLL1_CTR,
-	.en_reg_bit = PLL_ENABLE,
-	.calc_rate = &pll_calc_rate,
-	.recalc = &pll_clk_recalc,
-	.set_rate = &pll_clk_set_rate,
-	.rate_config = {pll_rtbl, ARRAY_SIZE(pll_rtbl), 1},
-	.private_data = &pll1_config,
-};
-
-/* PLL3 48 MHz clock */
-static struct clk pll3_48m_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &osc_24m_clk,
-	.rate = 48000000,
-};
-
-/* watch dog timer clock */
-static struct clk wdt_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &osc_24m_clk,
-	.recalc = &follow_parent,
-};
-
-/* clock derived from pll1 clk */
-/* cpu clock */
-static struct clk cpu_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll1_clk,
-	.recalc = &follow_parent,
-};
-
-/* ahb masks structure */
-static struct bus_clk_masks ahb_masks = {
-	.mask = PLL_HCLK_RATIO_MASK,
-	.shift = PLL_HCLK_RATIO_SHIFT,
-};
-
-/* ahb configuration structure */
-static struct bus_clk_config ahb_config = {
-	.reg = CORE_CLK_CFG,
-	.masks = &ahb_masks,
-};
-
-/* ahb rate configuration table, in ascending order of rates */
-struct bus_rate_tbl bus_rtbl[] = {
-	{.div = 3}, /* == parent divided by 4 */
-	{.div = 2}, /* == parent divided by 3 */
-	{.div = 1}, /* == parent divided by 2 */
-	{.div = 0}, /* == parent divided by 1 */
-};
-
-/* ahb clock */
-static struct clk ahb_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll1_clk,
-	.calc_rate = &bus_calc_rate,
-	.recalc = &bus_clk_recalc,
-	.set_rate = &bus_clk_set_rate,
-	.rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
-	.private_data = &ahb_config,
-};
-
-/* auxiliary synthesizers masks */
-static struct aux_clk_masks aux_masks = {
-	.eq_sel_mask = AUX_EQ_SEL_MASK,
-	.eq_sel_shift = AUX_EQ_SEL_SHIFT,
-	.eq1_mask = AUX_EQ1_SEL,
-	.eq2_mask = AUX_EQ2_SEL,
-	.xscale_sel_mask = AUX_XSCALE_MASK,
-	.xscale_sel_shift = AUX_XSCALE_SHIFT,
-	.yscale_sel_mask = AUX_YSCALE_MASK,
-	.yscale_sel_shift = AUX_YSCALE_SHIFT,
-};
-
-/* uart synth configurations */
-static struct aux_clk_config uart_synth_config = {
-	.synth_reg = UART_CLK_SYNT,
-	.masks = &aux_masks,
-};
-
-/* aux rate configuration table, in ascending order of rates */
-struct aux_rate_tbl aux_rtbl[] = {
-	/* For PLL1 = 332 MHz */
-	{.xscale = 1, .yscale = 8, .eq = 1}, /* 41.5 MHz */
-	{.xscale = 1, .yscale = 4, .eq = 1}, /* 83 MHz */
-	{.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */
-};
-
-/* uart synth clock */
-static struct clk uart_synth_clk = {
-	.en_reg = UART_CLK_SYNT,
-	.en_reg_bit = AUX_SYNT_ENB,
-	.pclk = &pll1_clk,
-	.calc_rate = &aux_calc_rate,
-	.recalc = &aux_clk_recalc,
-	.set_rate = &aux_clk_set_rate,
-	.rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 1},
-	.private_data = &uart_synth_config,
-};
-
-/* uart parents */
-static struct pclk_info uart_pclk_info[] = {
-	{
-		.pclk = &uart_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* uart parent select structure */
-static struct pclk_sel uart_pclk_sel = {
-	.pclk_info = uart_pclk_info,
-	.pclk_count = ARRAY_SIZE(uart_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = UART_CLK_MASK,
-};
-
-/* uart clock */
-static struct clk uart_clk = {
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = UART_CLK_ENB,
-	.pclk_sel = &uart_pclk_sel,
-	.pclk_sel_shift = UART_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* firda configurations */
-static struct aux_clk_config firda_synth_config = {
-	.synth_reg = FIRDA_CLK_SYNT,
-	.masks = &aux_masks,
-};
-
-/* firda synth clock */
-static struct clk firda_synth_clk = {
-	.en_reg = FIRDA_CLK_SYNT,
-	.en_reg_bit = AUX_SYNT_ENB,
-	.pclk = &pll1_clk,
-	.calc_rate = &aux_calc_rate,
-	.recalc = &aux_clk_recalc,
-	.set_rate = &aux_clk_set_rate,
-	.rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 1},
-	.private_data = &firda_synth_config,
-};
-
-/* firda parents */
-static struct pclk_info firda_pclk_info[] = {
-	{
-		.pclk = &firda_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* firda parent select structure */
-static struct pclk_sel firda_pclk_sel = {
-	.pclk_info = firda_pclk_info,
-	.pclk_count = ARRAY_SIZE(firda_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = FIRDA_CLK_MASK,
-};
-
-/* firda clock */
-static struct clk firda_clk = {
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = FIRDA_CLK_ENB,
-	.pclk_sel = &firda_pclk_sel,
-	.pclk_sel_shift = FIRDA_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* gpt synthesizer masks */
-static struct gpt_clk_masks gpt_masks = {
-	.mscale_sel_mask = GPT_MSCALE_MASK,
-	.mscale_sel_shift = GPT_MSCALE_SHIFT,
-	.nscale_sel_mask = GPT_NSCALE_MASK,
-	.nscale_sel_shift = GPT_NSCALE_SHIFT,
-};
-
-/* gpt rate configuration table, in ascending order of rates */
-struct gpt_rate_tbl gpt_rtbl[] = {
-	/* For pll1 = 332 MHz */
-	{.mscale = 4, .nscale = 0}, /* 41.5 MHz */
-	{.mscale = 2, .nscale = 0}, /* 55.3 MHz */
-	{.mscale = 1, .nscale = 0}, /* 83 MHz */
-};
-
-/* gpt0 synth clk config*/
-static struct gpt_clk_config gpt0_synth_config = {
-	.synth_reg = PRSC1_CLK_CFG,
-	.masks = &gpt_masks,
-};
-
-/* gpt synth clock */
-static struct clk gpt0_synth_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll1_clk,
-	.calc_rate = &gpt_calc_rate,
-	.recalc = &gpt_clk_recalc,
-	.set_rate = &gpt_clk_set_rate,
-	.rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
-	.private_data = &gpt0_synth_config,
-};
-
-/* gpt parents */
-static struct pclk_info gpt0_pclk_info[] = {
-	{
-		.pclk = &gpt0_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* gpt parent select structure */
-static struct pclk_sel gpt0_pclk_sel = {
-	.pclk_info = gpt0_pclk_info,
-	.pclk_count = ARRAY_SIZE(gpt0_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt0 timer clock */
-static struct clk gpt0_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk_sel = &gpt0_pclk_sel,
-	.pclk_sel_shift = GPT0_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* gpt1 synth clk configurations */
-static struct gpt_clk_config gpt1_synth_config = {
-	.synth_reg = PRSC2_CLK_CFG,
-	.masks = &gpt_masks,
-};
-
-/* gpt1 synth clock */
-static struct clk gpt1_synth_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll1_clk,
-	.calc_rate = &gpt_calc_rate,
-	.recalc = &gpt_clk_recalc,
-	.set_rate = &gpt_clk_set_rate,
-	.rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
-	.private_data = &gpt1_synth_config,
-};
-
-static struct pclk_info gpt1_pclk_info[] = {
-	{
-		.pclk = &gpt1_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* gpt parent select structure */
-static struct pclk_sel gpt1_pclk_sel = {
-	.pclk_info = gpt1_pclk_info,
-	.pclk_count = ARRAY_SIZE(gpt1_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt1 timer clock */
-static struct clk gpt1_clk = {
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = GPT1_CLK_ENB,
-	.pclk_sel = &gpt1_pclk_sel,
-	.pclk_sel_shift = GPT1_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* gpt2 synth clk configurations */
-static struct gpt_clk_config gpt2_synth_config = {
-	.synth_reg = PRSC3_CLK_CFG,
-	.masks = &gpt_masks,
-};
-
-/* gpt1 synth clock */
-static struct clk gpt2_synth_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll1_clk,
-	.calc_rate = &gpt_calc_rate,
-	.recalc = &gpt_clk_recalc,
-	.set_rate = &gpt_clk_set_rate,
-	.rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
-	.private_data = &gpt2_synth_config,
-};
-
-static struct pclk_info gpt2_pclk_info[] = {
-	{
-		.pclk = &gpt2_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* gpt parent select structure */
-static struct pclk_sel gpt2_pclk_sel = {
-	.pclk_info = gpt2_pclk_info,
-	.pclk_count = ARRAY_SIZE(gpt2_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt2 timer clock */
-static struct clk gpt2_clk = {
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = GPT2_CLK_ENB,
-	.pclk_sel = &gpt2_pclk_sel,
-	.pclk_sel_shift = GPT2_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* clock derived from pll3 clk */
-/* usbh clock */
-static struct clk usbh_clk = {
-	.pclk = &pll3_48m_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = USBH_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* usbd clock */
-static struct clk usbd_clk = {
-	.pclk = &pll3_48m_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = USBD_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* clock derived from ahb clk */
-/* apb masks structure */
-static struct bus_clk_masks apb_masks = {
-	.mask = HCLK_PCLK_RATIO_MASK,
-	.shift = HCLK_PCLK_RATIO_SHIFT,
-};
-
-/* apb configuration structure */
-static struct bus_clk_config apb_config = {
-	.reg = CORE_CLK_CFG,
-	.masks = &apb_masks,
-};
-
-/* apb clock */
-static struct clk apb_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &ahb_clk,
-	.calc_rate = &bus_calc_rate,
-	.recalc = &bus_clk_recalc,
-	.set_rate = &bus_clk_set_rate,
-	.rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
-	.private_data = &apb_config,
-};
-
-/* i2c clock */
-static struct clk i2c_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = I2C_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* dma clock */
-static struct clk dma_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = DMA_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* jpeg clock */
-static struct clk jpeg_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = JPEG_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* gmac clock */
-static struct clk gmac_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = GMAC_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* smi clock */
-static struct clk smi_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = SMI_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* c3 clock */
-static struct clk c3_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = C3_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* clock derived from apb clk */
-/* adc clock */
-static struct clk adc_clk = {
-	.pclk = &apb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = ADC_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
-/* emi clock */
-static struct clk emi_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &ahb_clk,
-	.recalc = &follow_parent,
-};
-#endif
-
-/* ssp clock */
-static struct clk ssp0_clk = {
-	.pclk = &apb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = SSP_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* gpio clock */
-static struct clk gpio_clk = {
-	.pclk = &apb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = GPIO_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-static struct clk dummy_apb_pclk;
-
-#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR310) || \
-	defined(CONFIG_MACH_SPEAR320)
-/* fsmc clock */
-static struct clk fsmc_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &ahb_clk,
-	.recalc = &follow_parent,
-};
-#endif
-
-/* common clocks to spear310 and spear320 */
-#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
-/* uart1 clock */
-static struct clk uart1_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-
-/* uart2 clock */
-static struct clk uart2_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-#endif /* CONFIG_MACH_SPEAR310 || CONFIG_MACH_SPEAR320 */
-
-/* common clocks to spear300 and spear320 */
-#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR320)
-/* clcd clock */
-static struct clk clcd_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll3_48m_clk,
-	.recalc = &follow_parent,
-};
-
-/* sdhci clock */
-static struct clk sdhci_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &ahb_clk,
-	.recalc = &follow_parent,
-};
-#endif /* CONFIG_MACH_SPEAR300 || CONFIG_MACH_SPEAR320 */
-
-/* spear300 machine specific clock structures */
-#ifdef CONFIG_MACH_SPEAR300
-/* gpio1 clock */
-static struct clk gpio1_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-
-/* keyboard clock */
-static struct clk kbd_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-
-#endif
-
-/* spear310 machine specific clock structures */
-#ifdef CONFIG_MACH_SPEAR310
-/* uart3 clock */
-static struct clk uart3_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-
-/* uart4 clock */
-static struct clk uart4_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-
-/* uart5 clock */
-static struct clk uart5_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-#endif
-
-/* spear320 machine specific clock structures */
-#ifdef CONFIG_MACH_SPEAR320
-/* can0 clock */
-static struct clk can0_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-
-/* can1 clock */
-static struct clk can1_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-
-/* i2c1 clock */
-static struct clk i2c1_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &ahb_clk,
-	.recalc = &follow_parent,
-};
-
-/* ssp1 clock */
-static struct clk ssp1_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-
-/* ssp2 clock */
-static struct clk ssp2_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-
-/* pwm clock */
-static struct clk pwm_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-#endif
-
-/* array of all spear 3xx clock lookups */
-static struct clk_lookup spear_clk_lookups[] = {
-	{ .con_id = "apb_pclk",		.clk = &dummy_apb_pclk},
-	/* root clks */
-	{ .con_id = "osc_32k_clk",	.clk = &osc_32k_clk},
-	{ .con_id = "osc_24m_clk",	.clk = &osc_24m_clk},
-	/* clock derived from 32 KHz osc clk */
-	{ .dev_id = "rtc-spear",	.clk = &rtc_clk},
-	/* clock derived from 24 MHz osc clk */
-	{ .con_id = "pll1_clk",		.clk = &pll1_clk},
-	{ .con_id = "pll3_48m_clk",	.clk = &pll3_48m_clk},
-	{ .dev_id = "wdt",		.clk = &wdt_clk},
-	/* clock derived from pll1 clk */
-	{ .con_id = "cpu_clk",		.clk = &cpu_clk},
-	{ .con_id = "ahb_clk",		.clk = &ahb_clk},
-	{ .con_id = "uart_synth_clk",	.clk = &uart_synth_clk},
-	{ .con_id = "firda_synth_clk",	.clk = &firda_synth_clk},
-	{ .con_id = "gpt0_synth_clk",	.clk = &gpt0_synth_clk},
-	{ .con_id = "gpt1_synth_clk",	.clk = &gpt1_synth_clk},
-	{ .con_id = "gpt2_synth_clk",	.clk = &gpt2_synth_clk},
-	{ .dev_id = "uart",		.clk = &uart_clk},
-	{ .dev_id = "firda",		.clk = &firda_clk},
-	{ .dev_id = "gpt0",		.clk = &gpt0_clk},
-	{ .dev_id = "gpt1",		.clk = &gpt1_clk},
-	{ .dev_id = "gpt2",		.clk = &gpt2_clk},
-	/* clock derived from pll3 clk */
-	{ .dev_id = "designware_udc",   .clk = &usbd_clk},
-	{ .con_id = "usbh_clk",		.clk = &usbh_clk},
-	/* clock derived from ahb clk */
-	{ .con_id = "apb_clk",		.clk = &apb_clk},
-	{ .dev_id = "i2c_designware.0",	.clk = &i2c_clk},
-	{ .dev_id = "dma",		.clk = &dma_clk},
-	{ .dev_id = "jpeg",		.clk = &jpeg_clk},
-	{ .dev_id = "gmac",		.clk = &gmac_clk},
-	{ .dev_id = "smi",		.clk = &smi_clk},
-	{ .dev_id = "c3",		.clk = &c3_clk},
-	/* clock derived from apb clk */
-	{ .dev_id = "adc",		.clk = &adc_clk},
-	{ .dev_id = "ssp-pl022.0",	.clk = &ssp0_clk},
-	{ .dev_id = "gpio",		.clk = &gpio_clk},
-};
-
-/* array of all spear 300 clock lookups */
-#ifdef CONFIG_MACH_SPEAR300
-static struct clk_lookup spear300_clk_lookups[] = {
-	{ .dev_id = "clcd",		.clk = &clcd_clk},
-	{ .con_id = "fsmc",		.clk = &fsmc_clk},
-	{ .dev_id = "gpio1",		.clk = &gpio1_clk},
-	{ .dev_id = "keyboard",		.clk = &kbd_clk},
-	{ .dev_id = "sdhci",		.clk = &sdhci_clk},
-};
-#endif
-
-/* array of all spear 310 clock lookups */
-#ifdef CONFIG_MACH_SPEAR310
-static struct clk_lookup spear310_clk_lookups[] = {
-	{ .con_id = "fsmc",		.clk = &fsmc_clk},
-	{ .con_id = "emi",		.clk = &emi_clk},
-	{ .dev_id = "uart1",		.clk = &uart1_clk},
-	{ .dev_id = "uart2",		.clk = &uart2_clk},
-	{ .dev_id = "uart3",		.clk = &uart3_clk},
-	{ .dev_id = "uart4",		.clk = &uart4_clk},
-	{ .dev_id = "uart5",		.clk = &uart5_clk},
-};
-#endif
-
-/* array of all spear 320 clock lookups */
-#ifdef CONFIG_MACH_SPEAR320
-static struct clk_lookup spear320_clk_lookups[] = {
-	{ .dev_id = "clcd",		.clk = &clcd_clk},
-	{ .con_id = "fsmc",		.clk = &fsmc_clk},
-	{ .dev_id = "i2c_designware.1",	.clk = &i2c1_clk},
-	{ .con_id = "emi",		.clk = &emi_clk},
-	{ .dev_id = "pwm",		.clk = &pwm_clk},
-	{ .dev_id = "sdhci",		.clk = &sdhci_clk},
-	{ .dev_id = "c_can_platform.0",	.clk = &can0_clk},
-	{ .dev_id = "c_can_platform.1",	.clk = &can1_clk},
-	{ .dev_id = "ssp-pl022.1",	.clk = &ssp1_clk},
-	{ .dev_id = "ssp-pl022.2",	.clk = &ssp2_clk},
-	{ .dev_id = "uart1",		.clk = &uart1_clk},
-	{ .dev_id = "uart2",		.clk = &uart2_clk},
-};
-#endif
-
-void __init spear3xx_clk_init(void)
-{
-	int i, cnt;
-	struct clk_lookup *lookups;
-
-	if (machine_is_spear300()) {
-		cnt = ARRAY_SIZE(spear300_clk_lookups);
-		lookups = spear300_clk_lookups;
-	} else if (machine_is_spear310()) {
-		cnt = ARRAY_SIZE(spear310_clk_lookups);
-		lookups = spear310_clk_lookups;
-	} else {
-		cnt = ARRAY_SIZE(spear320_clk_lookups);
-		lookups = spear320_clk_lookups;
-	}
-
-	for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
-		clk_register(&spear_clk_lookups[i]);
-
-	for (i = 0; i < cnt; i++)
-		clk_register(&lookups[i]);
-
-	clk_init();
-}

arch/arm/mach-spear3xx/include/mach/generic.h

@@ -14,189 +14,24 @@
 #ifndef __MACH_GENERIC_H
 #define __MACH_GENERIC_H
 
+#include <linux/amba/pl08x.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/amba/bus.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <plat/padmux.h>
-
-/* spear3xx declarations */
-/*
- * Each GPT has 2 timer channels
- * Following GPT channels will be used as clock source and clockevent
- */
-#define SPEAR_GPT0_BASE		SPEAR3XX_ML1_TMR_BASE
-#define SPEAR_GPT0_CHAN0_IRQ	SPEAR3XX_IRQ_CPU_GPT1_1
-#define SPEAR_GPT0_CHAN1_IRQ	SPEAR3XX_IRQ_CPU_GPT1_2
 
 /* Add spear3xx family device structure declarations here */
-extern struct amba_device spear3xx_gpio_device;
-extern struct amba_device spear3xx_uart_device;
 extern struct sys_timer spear3xx_timer;
+extern struct pl022_ssp_controller pl022_plat_data;
+extern struct pl08x_platform_data pl080_plat_data;
 
 /* Add spear3xx family function declarations here */
+void __init spear_setup_of_timer(void);
 void __init spear3xx_clk_init(void);
-void __init spear_setup_timer(void);
 void __init spear3xx_map_io(void);
-void __init spear3xx_init_irq(void);
-void __init spear3xx_init(void);
+void __init spear3xx_dt_init_irq(void);
 
 void spear_restart(char, const char *);
 
-/* pad mux declarations */
-#define PMX_FIRDA_MASK		(1 << 14)
-#define PMX_I2C_MASK		(1 << 13)
-#define PMX_SSP_CS_MASK		(1 << 12)
-#define PMX_SSP_MASK		(1 << 11)
-#define PMX_MII_MASK		(1 << 10)
-#define PMX_GPIO_PIN0_MASK	(1 << 9)
-#define PMX_GPIO_PIN1_MASK	(1 << 8)
-#define PMX_GPIO_PIN2_MASK	(1 << 7)
-#define PMX_GPIO_PIN3_MASK	(1 << 6)
-#define PMX_GPIO_PIN4_MASK	(1 << 5)
-#define PMX_GPIO_PIN5_MASK	(1 << 4)
-#define PMX_UART0_MODEM_MASK	(1 << 3)
-#define PMX_UART0_MASK		(1 << 2)
-#define PMX_TIMER_3_4_MASK	(1 << 1)
-#define PMX_TIMER_1_2_MASK	(1 << 0)
-
-/* pad mux devices */
-extern struct pmx_dev spear3xx_pmx_firda;
-extern struct pmx_dev spear3xx_pmx_i2c;
-extern struct pmx_dev spear3xx_pmx_ssp_cs;
-extern struct pmx_dev spear3xx_pmx_ssp;
-extern struct pmx_dev spear3xx_pmx_mii;
-extern struct pmx_dev spear3xx_pmx_gpio_pin0;
-extern struct pmx_dev spear3xx_pmx_gpio_pin1;
-extern struct pmx_dev spear3xx_pmx_gpio_pin2;
-extern struct pmx_dev spear3xx_pmx_gpio_pin3;
-extern struct pmx_dev spear3xx_pmx_gpio_pin4;
-extern struct pmx_dev spear3xx_pmx_gpio_pin5;
-extern struct pmx_dev spear3xx_pmx_uart0_modem;
-extern struct pmx_dev spear3xx_pmx_uart0;
-extern struct pmx_dev spear3xx_pmx_timer_3_4;
-extern struct pmx_dev spear3xx_pmx_timer_1_2;
-
-#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
-/* padmux plgpio devices */
-extern struct pmx_dev spear3xx_pmx_plgpio_0_1;
-extern struct pmx_dev spear3xx_pmx_plgpio_2_3;
-extern struct pmx_dev spear3xx_pmx_plgpio_4_5;
-extern struct pmx_dev spear3xx_pmx_plgpio_6_9;
-extern struct pmx_dev spear3xx_pmx_plgpio_10_27;
-extern struct pmx_dev spear3xx_pmx_plgpio_28;
-extern struct pmx_dev spear3xx_pmx_plgpio_29;
-extern struct pmx_dev spear3xx_pmx_plgpio_30;
-extern struct pmx_dev spear3xx_pmx_plgpio_31;
-extern struct pmx_dev spear3xx_pmx_plgpio_32;
-extern struct pmx_dev spear3xx_pmx_plgpio_33;
-extern struct pmx_dev spear3xx_pmx_plgpio_34_36;
-extern struct pmx_dev spear3xx_pmx_plgpio_37_42;
-extern struct pmx_dev spear3xx_pmx_plgpio_43_44_47_48;
-extern struct pmx_dev spear3xx_pmx_plgpio_45_46_49_50;
-#endif
-
-/* spear300 declarations */
-#ifdef CONFIG_MACH_SPEAR300
-/* Add spear300 machine device structure declarations here */
-extern struct amba_device spear300_gpio1_device;
-
-/* pad mux modes */
-extern struct pmx_mode spear300_nand_mode;
-extern struct pmx_mode spear300_nor_mode;
-extern struct pmx_mode spear300_photo_frame_mode;
-extern struct pmx_mode spear300_lend_ip_phone_mode;
-extern struct pmx_mode spear300_hend_ip_phone_mode;
-extern struct pmx_mode spear300_lend_wifi_phone_mode;
-extern struct pmx_mode spear300_hend_wifi_phone_mode;
-extern struct pmx_mode spear300_ata_pabx_wi2s_mode;
-extern struct pmx_mode spear300_ata_pabx_i2s_mode;
-extern struct pmx_mode spear300_caml_lcdw_mode;
-extern struct pmx_mode spear300_camu_lcd_mode;
-extern struct pmx_mode spear300_camu_wlcd_mode;
-extern struct pmx_mode spear300_caml_lcd_mode;
-
-/* pad mux devices */
-extern struct pmx_dev spear300_pmx_fsmc_2_chips;
-extern struct pmx_dev spear300_pmx_fsmc_4_chips;
-extern struct pmx_dev spear300_pmx_keyboard;
-extern struct pmx_dev spear300_pmx_clcd;
-extern struct pmx_dev spear300_pmx_telecom_gpio;
-extern struct pmx_dev spear300_pmx_telecom_tdm;
-extern struct pmx_dev spear300_pmx_telecom_spi_cs_i2c_clk;
-extern struct pmx_dev spear300_pmx_telecom_camera;
-extern struct pmx_dev spear300_pmx_telecom_dac;
-extern struct pmx_dev spear300_pmx_telecom_i2s;
-extern struct pmx_dev spear300_pmx_telecom_boot_pins;
-extern struct pmx_dev spear300_pmx_telecom_sdhci_4bit;
-extern struct pmx_dev spear300_pmx_telecom_sdhci_8bit;
-extern struct pmx_dev spear300_pmx_gpio1;
-
-/* Add spear300 machine function declarations here */
-void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
-		u8 pmx_dev_count);
-
-#endif /* CONFIG_MACH_SPEAR300 */
-
-/* spear310 declarations */
-#ifdef CONFIG_MACH_SPEAR310
-/* Add spear310 machine device structure declarations here */
-
-/* pad mux devices */
-extern struct pmx_dev spear310_pmx_emi_cs_0_1_4_5;
-extern struct pmx_dev spear310_pmx_emi_cs_2_3;
-extern struct pmx_dev spear310_pmx_uart1;
-extern struct pmx_dev spear310_pmx_uart2;
-extern struct pmx_dev spear310_pmx_uart3_4_5;
-extern struct pmx_dev spear310_pmx_fsmc;
-extern struct pmx_dev spear310_pmx_rs485_0_1;
-extern struct pmx_dev spear310_pmx_tdm0;
-
-/* Add spear310 machine function declarations here */
-void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
-		u8 pmx_dev_count);
-
-#endif /* CONFIG_MACH_SPEAR310 */
-
-/* spear320 declarations */
-#ifdef CONFIG_MACH_SPEAR320
-/* Add spear320 machine device structure declarations here */
-
-/* pad mux modes */
-extern struct pmx_mode spear320_auto_net_smii_mode;
-extern struct pmx_mode spear320_auto_net_mii_mode;
-extern struct pmx_mode spear320_auto_exp_mode;
-extern struct pmx_mode spear320_small_printers_mode;
-
-/* pad mux devices */
-extern struct pmx_dev spear320_pmx_clcd;
-extern struct pmx_dev spear320_pmx_emi;
-extern struct pmx_dev spear320_pmx_fsmc;
-extern struct pmx_dev spear320_pmx_spp;
-extern struct pmx_dev spear320_pmx_sdhci;
-extern struct pmx_dev spear320_pmx_i2s;
-extern struct pmx_dev spear320_pmx_uart1;
-extern struct pmx_dev spear320_pmx_uart1_modem;
-extern struct pmx_dev spear320_pmx_uart2;
-extern struct pmx_dev spear320_pmx_touchscreen;
-extern struct pmx_dev spear320_pmx_can;
-extern struct pmx_dev spear320_pmx_sdhci_led;
-extern struct pmx_dev spear320_pmx_pwm0;
-extern struct pmx_dev spear320_pmx_pwm1;
-extern struct pmx_dev spear320_pmx_pwm2;
-extern struct pmx_dev spear320_pmx_pwm3;
-extern struct pmx_dev spear320_pmx_ssp1;
-extern struct pmx_dev spear320_pmx_ssp2;
-extern struct pmx_dev spear320_pmx_mii1;
-extern struct pmx_dev spear320_pmx_smii0;
-extern struct pmx_dev spear320_pmx_smii1;
-extern struct pmx_dev spear320_pmx_i2c1;
-
-/* Add spear320 machine function declarations here */
-void __init spear320_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
-		u8 pmx_dev_count);
-
-#endif /* CONFIG_MACH_SPEAR320 */
-
 #endif /* __MACH_GENERIC_H */

arch/arm/mach-spear3xx/include/mach/hardware.h

@@ -1,23 +1 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/hardware.h
- *
- * Hardware definitions for SPEAr3xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_HARDWARE_H
-#define __MACH_HARDWARE_H
-
-#include <plat/hardware.h>
-#include <mach/spear.h>
-
-/* Vitual to physical translation of statically mapped space */
-#define IO_ADDRESS(x)		(x | 0xF0000000)
-
-#endif /* __MACH_HARDWARE_H */
+/* empty */

arch/arm/mach-spear3xx/include/mach/irqs.h

@@ -14,141 +14,14 @@
 #ifndef __MACH_IRQS_H
 #define __MACH_IRQS_H
 
-/* SPEAr3xx IRQ definitions */
-#define SPEAR3XX_IRQ_HW_ACCEL_MOD_0		0
+/* FIXME: probe all these from DT */
 #define SPEAR3XX_IRQ_INTRCOMM_RAS_ARM		1
-#define SPEAR3XX_IRQ_CPU_GPT1_1			2
-#define SPEAR3XX_IRQ_CPU_GPT1_2			3
-#define SPEAR3XX_IRQ_BASIC_GPT1_1		4
-#define SPEAR3XX_IRQ_BASIC_GPT1_2		5
-#define SPEAR3XX_IRQ_BASIC_GPT2_1		6
-#define SPEAR3XX_IRQ_BASIC_GPT2_2		7
-#define SPEAR3XX_IRQ_BASIC_DMA			8
-#define SPEAR3XX_IRQ_BASIC_SMI			9
-#define SPEAR3XX_IRQ_BASIC_RTC			10
-#define SPEAR3XX_IRQ_BASIC_GPIO			11
-#define SPEAR3XX_IRQ_BASIC_WDT			12
-#define SPEAR3XX_IRQ_DDR_CONTROLLER		13
-#define SPEAR3XX_IRQ_SYS_ERROR			14
-#define SPEAR3XX_IRQ_WAKEUP_RCV			15
-#define SPEAR3XX_IRQ_JPEG			16
-#define SPEAR3XX_IRQ_IRDA			17
-#define SPEAR3XX_IRQ_ADC			18
-#define SPEAR3XX_IRQ_UART			19
-#define SPEAR3XX_IRQ_SSP			20
-#define SPEAR3XX_IRQ_I2C			21
-#define SPEAR3XX_IRQ_MAC_1			22
-#define SPEAR3XX_IRQ_MAC_2			23
-#define SPEAR3XX_IRQ_USB_DEV			24
-#define SPEAR3XX_IRQ_USB_H_OHCI_0		25
-#define SPEAR3XX_IRQ_USB_H_EHCI_0		26
-#define SPEAR3XX_IRQ_USB_H_EHCI_1		SPEAR3XX_IRQ_USB_H_EHCI_0
-#define SPEAR3XX_IRQ_USB_H_OHCI_1		27
 #define SPEAR3XX_IRQ_GEN_RAS_1			28
 #define SPEAR3XX_IRQ_GEN_RAS_2			29
 #define SPEAR3XX_IRQ_GEN_RAS_3			30
-#define SPEAR3XX_IRQ_HW_ACCEL_MOD_1		31
 #define SPEAR3XX_IRQ_VIC_END			32
-
 #define SPEAR3XX_VIRQ_START			SPEAR3XX_IRQ_VIC_END
 
-/* SPEAr300 Virtual irq definitions */
-/* IRQs sharing IRQ_GEN_RAS_1 */
-#define SPEAR300_VIRQ_IT_PERS_S			(SPEAR3XX_VIRQ_START + 0)
-#define SPEAR300_VIRQ_IT_CHANGE_S		(SPEAR3XX_VIRQ_START + 1)
-#define SPEAR300_VIRQ_I2S			(SPEAR3XX_VIRQ_START + 2)
-#define SPEAR300_VIRQ_TDM			(SPEAR3XX_VIRQ_START + 3)
-#define SPEAR300_VIRQ_CAMERA_L			(SPEAR3XX_VIRQ_START + 4)
-#define SPEAR300_VIRQ_CAMERA_F			(SPEAR3XX_VIRQ_START + 5)
-#define SPEAR300_VIRQ_CAMERA_V			(SPEAR3XX_VIRQ_START + 6)
-#define SPEAR300_VIRQ_KEYBOARD			(SPEAR3XX_VIRQ_START + 7)
-#define SPEAR300_VIRQ_GPIO1			(SPEAR3XX_VIRQ_START + 8)
-
-/* IRQs sharing IRQ_GEN_RAS_3 */
-#define SPEAR300_IRQ_CLCD			SPEAR3XX_IRQ_GEN_RAS_3
-
-/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
-#define SPEAR300_IRQ_SDHCI			SPEAR3XX_IRQ_INTRCOMM_RAS_ARM
-
-/* SPEAr310 Virtual irq definitions */
-/* IRQs sharing IRQ_GEN_RAS_1 */
-#define SPEAR310_VIRQ_SMII0			(SPEAR3XX_VIRQ_START + 0)
-#define SPEAR310_VIRQ_SMII1			(SPEAR3XX_VIRQ_START + 1)
-#define SPEAR310_VIRQ_SMII2			(SPEAR3XX_VIRQ_START + 2)
-#define SPEAR310_VIRQ_SMII3			(SPEAR3XX_VIRQ_START + 3)
-#define SPEAR310_VIRQ_WAKEUP_SMII0		(SPEAR3XX_VIRQ_START + 4)
-#define SPEAR310_VIRQ_WAKEUP_SMII1		(SPEAR3XX_VIRQ_START + 5)
-#define SPEAR310_VIRQ_WAKEUP_SMII2		(SPEAR3XX_VIRQ_START + 6)
-#define SPEAR310_VIRQ_WAKEUP_SMII3		(SPEAR3XX_VIRQ_START + 7)
-
-/* IRQs sharing IRQ_GEN_RAS_2 */
-#define SPEAR310_VIRQ_UART1			(SPEAR3XX_VIRQ_START + 8)
-#define SPEAR310_VIRQ_UART2			(SPEAR3XX_VIRQ_START + 9)
-#define SPEAR310_VIRQ_UART3			(SPEAR3XX_VIRQ_START + 10)
-#define SPEAR310_VIRQ_UART4			(SPEAR3XX_VIRQ_START + 11)
-#define SPEAR310_VIRQ_UART5			(SPEAR3XX_VIRQ_START + 12)
-
-/* IRQs sharing IRQ_GEN_RAS_3 */
-#define SPEAR310_VIRQ_EMI			(SPEAR3XX_VIRQ_START + 13)
-#define SPEAR310_VIRQ_PLGPIO			(SPEAR3XX_VIRQ_START + 14)
-
-/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
-#define SPEAR310_VIRQ_TDM_HDLC			(SPEAR3XX_VIRQ_START + 15)
-#define SPEAR310_VIRQ_RS485_0			(SPEAR3XX_VIRQ_START + 16)
-#define SPEAR310_VIRQ_RS485_1			(SPEAR3XX_VIRQ_START + 17)
-
-/* SPEAr320 Virtual irq definitions */
-/* IRQs sharing IRQ_GEN_RAS_1 */
-#define SPEAR320_VIRQ_EMI			(SPEAR3XX_VIRQ_START + 0)
-#define SPEAR320_VIRQ_CLCD			(SPEAR3XX_VIRQ_START + 1)
-#define SPEAR320_VIRQ_SPP			(SPEAR3XX_VIRQ_START + 2)
-
-/* IRQs sharing IRQ_GEN_RAS_2 */
-#define SPEAR320_IRQ_SDHCI			SPEAR3XX_IRQ_GEN_RAS_2
-
-/* IRQs sharing IRQ_GEN_RAS_3 */
-#define SPEAR320_VIRQ_PLGPIO			(SPEAR3XX_VIRQ_START + 3)
-#define SPEAR320_VIRQ_I2S_PLAY			(SPEAR3XX_VIRQ_START + 4)
-#define SPEAR320_VIRQ_I2S_REC			(SPEAR3XX_VIRQ_START + 5)
-
-/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
-#define SPEAR320_VIRQ_CANU			(SPEAR3XX_VIRQ_START + 6)
-#define SPEAR320_VIRQ_CANL			(SPEAR3XX_VIRQ_START + 7)
-#define SPEAR320_VIRQ_UART1			(SPEAR3XX_VIRQ_START + 8)
-#define SPEAR320_VIRQ_UART2			(SPEAR3XX_VIRQ_START + 9)
-#define SPEAR320_VIRQ_SSP1			(SPEAR3XX_VIRQ_START + 10)
-#define SPEAR320_VIRQ_SSP2			(SPEAR3XX_VIRQ_START + 11)
-#define SPEAR320_VIRQ_SMII0			(SPEAR3XX_VIRQ_START + 12)
-#define SPEAR320_VIRQ_MII1_SMII1		(SPEAR3XX_VIRQ_START + 13)
-#define SPEAR320_VIRQ_WAKEUP_SMII0		(SPEAR3XX_VIRQ_START + 14)
-#define SPEAR320_VIRQ_WAKEUP_MII1_SMII1		(SPEAR3XX_VIRQ_START + 15)
-#define SPEAR320_VIRQ_I2C1			(SPEAR3XX_VIRQ_START + 16)
-
-/*
- * GPIO pins virtual irqs
- * Use the lowest number for the GPIO virtual IRQs base on which subarchs
- * we have compiled in
- */
-#if defined(CONFIG_MACH_SPEAR310)
-#define SPEAR3XX_GPIO_INT_BASE			(SPEAR3XX_VIRQ_START + 18)
-#elif defined(CONFIG_MACH_SPEAR320)
-#define SPEAR3XX_GPIO_INT_BASE			(SPEAR3XX_VIRQ_START + 17)
-#else
-#define SPEAR3XX_GPIO_INT_BASE			(SPEAR3XX_VIRQ_START + 9)
-#endif
-
-#define SPEAR300_GPIO1_INT_BASE			(SPEAR3XX_GPIO_INT_BASE + 8)
-#define SPEAR3XX_PLGPIO_COUNT	102
-
-#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
-#define SPEAR3XX_PLGPIO_INT_BASE		(SPEAR3XX_GPIO_INT_BASE + 8)
-#define SPEAR3XX_GPIO_INT_END			(SPEAR3XX_PLGPIO_INT_BASE + \
-							SPEAR3XX_PLGPIO_COUNT)
-#else
-#define SPEAR3XX_GPIO_INT_END	(SPEAR300_GPIO1_INT_BASE + 8)
-#endif
-
-#define SPEAR3XX_VIRQ_END	SPEAR3XX_GPIO_INT_END
-#define NR_IRQS			SPEAR3XX_VIRQ_END
+#define NR_IRQS			160
 
 #endif /* __MACH_IRQS_H */

arch/arm/mach-spear3xx/include/mach/misc_regs.h

@@ -14,151 +14,9 @@
 #ifndef __MACH_MISC_REGS_H
 #define __MACH_MISC_REGS_H
 
-#include <mach/hardware.h>
+#include <mach/spear.h>
 
 #define MISC_BASE		IOMEM(VA_SPEAR3XX_ICM3_MISC_REG_BASE)
-
-#define SOC_CFG_CTR		(MISC_BASE + 0x000)
-#define DIAG_CFG_CTR		(MISC_BASE + 0x004)
-#define PLL1_CTR		(MISC_BASE + 0x008)
-#define PLL1_FRQ		(MISC_BASE + 0x00C)
-#define PLL1_MOD		(MISC_BASE + 0x010)
-#define PLL2_CTR		(MISC_BASE + 0x014)
-/* PLL_CTR register masks */
-#define PLL_ENABLE		2
-#define PLL_MODE_SHIFT		4
-#define PLL_MODE_MASK		0x3
-#define PLL_MODE_NORMAL		0
-#define PLL_MODE_FRACTION	1
-#define PLL_MODE_DITH_DSB	2
-#define PLL_MODE_DITH_SSB	3
-
-#define PLL2_FRQ		(MISC_BASE + 0x018)
-/* PLL FRQ register masks */
-#define PLL_DIV_N_SHIFT		0
-#define PLL_DIV_N_MASK		0xFF
-#define PLL_DIV_P_SHIFT		8
-#define PLL_DIV_P_MASK		0x7
-#define PLL_NORM_FDBK_M_SHIFT	24
-#define PLL_NORM_FDBK_M_MASK	0xFF
-#define PLL_DITH_FDBK_M_SHIFT	16
-#define PLL_DITH_FDBK_M_MASK	0xFFFF
-
-#define PLL2_MOD		(MISC_BASE + 0x01C)
-#define PLL_CLK_CFG		(MISC_BASE + 0x020)
-#define CORE_CLK_CFG		(MISC_BASE + 0x024)
-/* CORE CLK CFG register masks */
-#define PLL_HCLK_RATIO_SHIFT	10
-#define PLL_HCLK_RATIO_MASK	0x3
-#define HCLK_PCLK_RATIO_SHIFT	8
-#define HCLK_PCLK_RATIO_MASK	0x3
-
-#define PERIP_CLK_CFG		(MISC_BASE + 0x028)
-/* PERIP_CLK_CFG register masks */
-#define UART_CLK_SHIFT		4
-#define UART_CLK_MASK		0x1
-#define FIRDA_CLK_SHIFT		5
-#define FIRDA_CLK_MASK		0x3
-#define GPT0_CLK_SHIFT		8
-#define GPT1_CLK_SHIFT		11
-#define GPT2_CLK_SHIFT		12
-#define GPT_CLK_MASK		0x1
-#define AUX_CLK_PLL3_VAL	0
-#define AUX_CLK_PLL1_VAL	1
-
-#define PERIP1_CLK_ENB		(MISC_BASE + 0x02C)
-/* PERIP1_CLK_ENB register masks */
-#define UART_CLK_ENB		3
-#define SSP_CLK_ENB		5
-#define I2C_CLK_ENB		7
-#define JPEG_CLK_ENB		8
-#define FIRDA_CLK_ENB		10
-#define GPT1_CLK_ENB		11
-#define GPT2_CLK_ENB		12
-#define ADC_CLK_ENB		15
-#define RTC_CLK_ENB		17
-#define GPIO_CLK_ENB		18
-#define DMA_CLK_ENB		19
-#define SMI_CLK_ENB		21
-#define GMAC_CLK_ENB		23
-#define USBD_CLK_ENB		24
-#define USBH_CLK_ENB		25
-#define C3_CLK_ENB		31
-
-#define SOC_CORE_ID		(MISC_BASE + 0x030)
-#define RAS_CLK_ENB		(MISC_BASE + 0x034)
-#define PERIP1_SOF_RST		(MISC_BASE + 0x038)
-/* PERIP1_SOF_RST register masks */
-#define JPEG_SOF_RST		8
-
-#define SOC_USER_ID		(MISC_BASE + 0x03C)
-#define RAS_SOF_RST		(MISC_BASE + 0x040)
-#define PRSC1_CLK_CFG		(MISC_BASE + 0x044)
-#define PRSC2_CLK_CFG		(MISC_BASE + 0x048)
-#define PRSC3_CLK_CFG		(MISC_BASE + 0x04C)
-/* gpt synthesizer register masks */
-#define GPT_MSCALE_SHIFT	0
-#define GPT_MSCALE_MASK		0xFFF
-#define GPT_NSCALE_SHIFT	12
-#define GPT_NSCALE_MASK		0xF
-
-#define AMEM_CLK_CFG		(MISC_BASE + 0x050)
-#define EXPI_CLK_CFG		(MISC_BASE + 0x054)
-#define CLCD_CLK_SYNT		(MISC_BASE + 0x05C)
-#define FIRDA_CLK_SYNT		(MISC_BASE + 0x060)
-#define UART_CLK_SYNT		(MISC_BASE + 0x064)
-#define GMAC_CLK_SYNT		(MISC_BASE + 0x068)
-#define RAS1_CLK_SYNT		(MISC_BASE + 0x06C)
-#define RAS2_CLK_SYNT		(MISC_BASE + 0x070)
-#define RAS3_CLK_SYNT		(MISC_BASE + 0x074)
-#define RAS4_CLK_SYNT		(MISC_BASE + 0x078)
-/* aux clk synthesiser register masks for irda to ras4 */
-#define AUX_SYNT_ENB		31
-#define AUX_EQ_SEL_SHIFT	30
-#define AUX_EQ_SEL_MASK		1
-#define AUX_EQ1_SEL		0
-#define AUX_EQ2_SEL		1
-#define AUX_XSCALE_SHIFT	16
-#define AUX_XSCALE_MASK		0xFFF
-#define AUX_YSCALE_SHIFT	0
-#define AUX_YSCALE_MASK		0xFFF
-
-#define ICM1_ARB_CFG		(MISC_BASE + 0x07C)
-#define ICM2_ARB_CFG		(MISC_BASE + 0x080)
-#define ICM3_ARB_CFG		(MISC_BASE + 0x084)
-#define ICM4_ARB_CFG		(MISC_BASE + 0x088)
-#define ICM5_ARB_CFG		(MISC_BASE + 0x08C)
-#define ICM6_ARB_CFG		(MISC_BASE + 0x090)
-#define ICM7_ARB_CFG		(MISC_BASE + 0x094)
-#define ICM8_ARB_CFG		(MISC_BASE + 0x098)
-#define ICM9_ARB_CFG		(MISC_BASE + 0x09C)
 #define DMA_CHN_CFG		(MISC_BASE + 0x0A0)
-#define USB2_PHY_CFG		(MISC_BASE + 0x0A4)
-#define GMAC_CFG_CTR		(MISC_BASE + 0x0A8)
-#define EXPI_CFG_CTR		(MISC_BASE + 0x0AC)
-#define PRC1_LOCK_CTR		(MISC_BASE + 0x0C0)
-#define PRC2_LOCK_CTR		(MISC_BASE + 0x0C4)
-#define PRC3_LOCK_CTR		(MISC_BASE + 0x0C8)
-#define PRC4_LOCK_CTR		(MISC_BASE + 0x0CC)
-#define PRC1_IRQ_CTR		(MISC_BASE + 0x0D0)
-#define PRC2_IRQ_CTR		(MISC_BASE + 0x0D4)
-#define PRC3_IRQ_CTR		(MISC_BASE + 0x0D8)
-#define PRC4_IRQ_CTR		(MISC_BASE + 0x0DC)
-#define PWRDOWN_CFG_CTR		(MISC_BASE + 0x0E0)
-#define COMPSSTL_1V8_CFG	(MISC_BASE + 0x0E4)
-#define COMPSSTL_2V5_CFG	(MISC_BASE + 0x0E8)
-#define COMPCOR_3V3_CFG		(MISC_BASE + 0x0EC)
-#define SSTLPAD_CFG_CTR		(MISC_BASE + 0x0F0)
-#define BIST1_CFG_CTR		(MISC_BASE + 0x0F4)
-#define BIST2_CFG_CTR		(MISC_BASE + 0x0F8)
-#define BIST3_CFG_CTR		(MISC_BASE + 0x0FC)
-#define BIST4_CFG_CTR		(MISC_BASE + 0x100)
-#define BIST5_CFG_CTR		(MISC_BASE + 0x104)
-#define BIST1_STS_RES		(MISC_BASE + 0x108)
-#define BIST2_STS_RES		(MISC_BASE + 0x10C)
-#define BIST3_STS_RES		(MISC_BASE + 0x110)
-#define BIST4_STS_RES		(MISC_BASE + 0x114)
-#define BIST5_STS_RES		(MISC_BASE + 0x118)
-#define SYSERR_CFG_CTR		(MISC_BASE + 0x11C)
 
 #endif /* __MACH_MISC_REGS_H */

arch/arm/mach-spear3xx/include/mach/spear.h

@@ -15,60 +15,26 @@
 #define __MACH_SPEAR3XX_H
 
 #include <asm/memory.h>
-#include <mach/spear300.h>
-#include <mach/spear310.h>
-#include <mach/spear320.h>
-
-#define SPEAR3XX_ML_SDRAM_BASE		UL(0x00000000)
-
-#define SPEAR3XX_ICM9_BASE		UL(0xC0000000)
 
 /* ICM1 - Low speed connection */
 #define SPEAR3XX_ICM1_2_BASE		UL(0xD0000000)
+#define VA_SPEAR3XX_ICM1_2_BASE		UL(0xFD000000)
 #define SPEAR3XX_ICM1_UART_BASE		UL(0xD0000000)
-#define VA_SPEAR3XX_ICM1_UART_BASE	IO_ADDRESS(SPEAR3XX_ICM1_UART_BASE)
-#define SPEAR3XX_ICM1_ADC_BASE		UL(0xD0080000)
+#define VA_SPEAR3XX_ICM1_UART_BASE	(VA_SPEAR3XX_ICM1_2_BASE | SPEAR3XX_ICM1_UART_BASE)
 #define SPEAR3XX_ICM1_SSP_BASE		UL(0xD0100000)
-#define SPEAR3XX_ICM1_I2C_BASE		UL(0xD0180000)
-#define SPEAR3XX_ICM1_JPEG_BASE		UL(0xD0800000)
-#define SPEAR3XX_ICM1_IRDA_BASE		UL(0xD1000000)
-#define SPEAR3XX_ICM1_SRAM_BASE		UL(0xD2800000)
-
-/* ICM2 - Application Subsystem */
-#define SPEAR3XX_ICM2_HWACCEL0_BASE	UL(0xD8800000)
-#define SPEAR3XX_ICM2_HWACCEL1_BASE	UL(0xD9000000)
-
-/* ICM4 - High Speed Connection */
-#define SPEAR3XX_ICM4_BASE		UL(0xE0000000)
-#define SPEAR3XX_ICM4_MII_BASE		UL(0xE0800000)
-#define SPEAR3XX_ICM4_USBD_FIFO_BASE	UL(0xE1000000)
-#define SPEAR3XX_ICM4_USBD_CSR_BASE	UL(0xE1100000)
-#define SPEAR3XX_ICM4_USBD_PLDT_BASE	UL(0xE1200000)
-#define SPEAR3XX_ICM4_USB_EHCI0_1_BASE	UL(0xE1800000)
-#define SPEAR3XX_ICM4_USB_OHCI0_BASE	UL(0xE1900000)
-#define SPEAR3XX_ICM4_USB_OHCI1_BASE	UL(0xE2100000)
-#define SPEAR3XX_ICM4_USB_ARB_BASE	UL(0xE2800000)
 
 /* ML1 - Multi Layer CPU Subsystem */
 #define SPEAR3XX_ICM3_ML1_2_BASE	UL(0xF0000000)
-#define SPEAR3XX_ML1_TMR_BASE		UL(0xF0000000)
-#define SPEAR3XX_ML1_VIC_BASE		UL(0xF1100000)
-#define VA_SPEAR3XX_ML1_VIC_BASE	IO_ADDRESS(SPEAR3XX_ML1_VIC_BASE)
+#define VA_SPEAR6XX_ML_CPU_BASE		UL(0xF0000000)
 
 /* ICM3 - Basic Subsystem */
-#define SPEAR3XX_ICM3_SMEM_BASE		UL(0xF8000000)
 #define SPEAR3XX_ICM3_SMI_CTRL_BASE	UL(0xFC000000)
+#define VA_SPEAR3XX_ICM3_SMI_CTRL_BASE	UL(0xFC000000)
 #define SPEAR3XX_ICM3_DMA_BASE		UL(0xFC400000)
-#define SPEAR3XX_ICM3_SDRAM_CTRL_BASE	UL(0xFC600000)
-#define SPEAR3XX_ICM3_TMR0_BASE		UL(0xFC800000)
-#define SPEAR3XX_ICM3_WDT_BASE		UL(0xFC880000)
-#define SPEAR3XX_ICM3_RTC_BASE		UL(0xFC900000)
-#define SPEAR3XX_ICM3_GPIO_BASE		UL(0xFC980000)
 #define SPEAR3XX_ICM3_SYS_CTRL_BASE	UL(0xFCA00000)
-#define VA_SPEAR3XX_ICM3_SYS_CTRL_BASE	IO_ADDRESS(SPEAR3XX_ICM3_SYS_CTRL_BASE)
+#define VA_SPEAR3XX_ICM3_SYS_CTRL_BASE	(VA_SPEAR3XX_ICM3_SMI_CTRL_BASE | SPEAR3XX_ICM3_SYS_CTRL_BASE)
 #define SPEAR3XX_ICM3_MISC_REG_BASE	UL(0xFCA80000)
-#define VA_SPEAR3XX_ICM3_MISC_REG_BASE	IO_ADDRESS(SPEAR3XX_ICM3_MISC_REG_BASE)
-#define SPEAR3XX_ICM3_TMR1_BASE		UL(0xFCB00000)
+#define VA_SPEAR3XX_ICM3_MISC_REG_BASE	(VA_SPEAR3XX_ICM3_SMI_CTRL_BASE | SPEAR3XX_ICM3_MISC_REG_BASE)
 
 /* Debug uart for linux, will be used for debug and uncompress messages */
 #define SPEAR_DBG_UART_BASE		SPEAR3XX_ICM1_UART_BASE
@@ -78,4 +44,17 @@
 #define SPEAR_SYS_CTRL_BASE		SPEAR3XX_ICM3_SYS_CTRL_BASE
 #define VA_SPEAR_SYS_CTRL_BASE		VA_SPEAR3XX_ICM3_SYS_CTRL_BASE
 
+/* SPEAr320 Macros */
+#define SPEAR320_SOC_CONFIG_BASE	UL(0xB3000000)
+#define VA_SPEAR320_SOC_CONFIG_BASE	UL(0xFE000000)
+#define SPEAR320_CONTROL_REG		IOMEM(VA_SPEAR320_SOC_CONFIG_BASE)
+#define SPEAR320_EXT_CTRL_REG		IOMEM(VA_SPEAR320_SOC_CONFIG_BASE + 0x0018)
+	#define SPEAR320_UARTX_PCLK_MASK		0x1
+	#define SPEAR320_UART2_PCLK_SHIFT		8
+	#define SPEAR320_UART3_PCLK_SHIFT		9
+	#define SPEAR320_UART4_PCLK_SHIFT		10
+	#define SPEAR320_UART5_PCLK_SHIFT		11
+	#define SPEAR320_UART6_PCLK_SHIFT		12
+	#define SPEAR320_RS485_PCLK_SHIFT		13
+
 #endif /* __MACH_SPEAR3XX_H */

arch/arm/mach-spear3xx/include/mach/spear300.h

@@ -1,54 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/spear300.h
- *
- * SPEAr300 Machine specific definition
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifdef	CONFIG_MACH_SPEAR300
-
-#ifndef __MACH_SPEAR300_H
-#define __MACH_SPEAR300_H
-
-/* Base address of various IPs */
-#define SPEAR300_TELECOM_BASE		UL(0x50000000)
-
-/* Interrupt registers offsets and masks */
-#define SPEAR300_INT_ENB_MASK_REG	0x54
-#define SPEAR300_INT_STS_MASK_REG	0x58
-#define SPEAR300_IT_PERS_S_IRQ_MASK	(1 << 0)
-#define SPEAR300_IT_CHANGE_S_IRQ_MASK	(1 << 1)
-#define SPEAR300_I2S_IRQ_MASK		(1 << 2)
-#define SPEAR300_TDM_IRQ_MASK		(1 << 3)
-#define SPEAR300_CAMERA_L_IRQ_MASK	(1 << 4)
-#define SPEAR300_CAMERA_F_IRQ_MASK	(1 << 5)
-#define SPEAR300_CAMERA_V_IRQ_MASK	(1 << 6)
-#define SPEAR300_KEYBOARD_IRQ_MASK	(1 << 7)
-#define SPEAR300_GPIO1_IRQ_MASK		(1 << 8)
-
-#define SPEAR300_SHIRQ_RAS1_MASK	0x1FF
-
-#define SPEAR300_CLCD_BASE		UL(0x60000000)
-#define SPEAR300_SDHCI_BASE		UL(0x70000000)
-#define SPEAR300_NAND_0_BASE		UL(0x80000000)
-#define SPEAR300_NAND_1_BASE		UL(0x84000000)
-#define SPEAR300_NAND_2_BASE		UL(0x88000000)
-#define SPEAR300_NAND_3_BASE		UL(0x8c000000)
-#define SPEAR300_NOR_0_BASE		UL(0x90000000)
-#define SPEAR300_NOR_1_BASE		UL(0x91000000)
-#define SPEAR300_NOR_2_BASE		UL(0x92000000)
-#define SPEAR300_NOR_3_BASE		UL(0x93000000)
-#define SPEAR300_FSMC_BASE		UL(0x94000000)
-#define SPEAR300_SOC_CONFIG_BASE	UL(0x99000000)
-#define SPEAR300_KEYBOARD_BASE		UL(0xA0000000)
-#define SPEAR300_GPIO_BASE		UL(0xA9000000)
-
-#endif /* __MACH_SPEAR300_H */
-
-#endif /* CONFIG_MACH_SPEAR300 */

arch/arm/mach-spear3xx/include/mach/spear310.h

@@ -1,58 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/spear310.h
- *
- * SPEAr310 Machine specific definition
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifdef	CONFIG_MACH_SPEAR310
-
-#ifndef __MACH_SPEAR310_H
-#define __MACH_SPEAR310_H
-
-#define SPEAR310_NAND_BASE		UL(0x40000000)
-#define SPEAR310_FSMC_BASE		UL(0x44000000)
-#define SPEAR310_UART1_BASE		UL(0xB2000000)
-#define SPEAR310_UART2_BASE		UL(0xB2080000)
-#define SPEAR310_UART3_BASE		UL(0xB2100000)
-#define SPEAR310_UART4_BASE		UL(0xB2180000)
-#define SPEAR310_UART5_BASE		UL(0xB2200000)
-#define SPEAR310_HDLC_BASE		UL(0xB2800000)
-#define SPEAR310_RS485_0_BASE		UL(0xB3000000)
-#define SPEAR310_RS485_1_BASE		UL(0xB3800000)
-#define SPEAR310_SOC_CONFIG_BASE	UL(0xB4000000)
-
-/* Interrupt registers offsets and masks */
-#define SPEAR310_INT_STS_MASK_REG	0x04
-#define SPEAR310_SMII0_IRQ_MASK		(1 << 0)
-#define SPEAR310_SMII1_IRQ_MASK		(1 << 1)
-#define SPEAR310_SMII2_IRQ_MASK		(1 << 2)
-#define SPEAR310_SMII3_IRQ_MASK		(1 << 3)
-#define SPEAR310_WAKEUP_SMII0_IRQ_MASK	(1 << 4)
-#define SPEAR310_WAKEUP_SMII1_IRQ_MASK	(1 << 5)
-#define SPEAR310_WAKEUP_SMII2_IRQ_MASK	(1 << 6)
-#define SPEAR310_WAKEUP_SMII3_IRQ_MASK	(1 << 7)
-#define SPEAR310_UART1_IRQ_MASK		(1 << 8)
-#define SPEAR310_UART2_IRQ_MASK		(1 << 9)
-#define SPEAR310_UART3_IRQ_MASK		(1 << 10)
-#define SPEAR310_UART4_IRQ_MASK		(1 << 11)
-#define SPEAR310_UART5_IRQ_MASK		(1 << 12)
-#define SPEAR310_EMI_IRQ_MASK		(1 << 13)
-#define SPEAR310_TDM_HDLC_IRQ_MASK	(1 << 14)
-#define SPEAR310_RS485_0_IRQ_MASK	(1 << 15)
-#define SPEAR310_RS485_1_IRQ_MASK	(1 << 16)
-
-#define SPEAR310_SHIRQ_RAS1_MASK	0x000FF
-#define SPEAR310_SHIRQ_RAS2_MASK	0x01F00
-#define SPEAR310_SHIRQ_RAS3_MASK	0x02000
-#define SPEAR310_SHIRQ_INTRCOMM_RAS_MASK	0x1C000
-
-#endif /* __MACH_SPEAR310_H */
-
-#endif /* CONFIG_MACH_SPEAR310 */

arch/arm/mach-spear3xx/include/mach/spear320.h

@@ -1,67 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/spear320.h
- *
- * SPEAr320 Machine specific definition
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifdef	CONFIG_MACH_SPEAR320
-
-#ifndef __MACH_SPEAR320_H
-#define __MACH_SPEAR320_H
-
-#define SPEAR320_EMI_CTRL_BASE		UL(0x40000000)
-#define SPEAR320_FSMC_BASE		UL(0x4C000000)
-#define SPEAR320_NAND_BASE		UL(0x50000000)
-#define SPEAR320_I2S_BASE		UL(0x60000000)
-#define SPEAR320_SDHCI_BASE		UL(0x70000000)
-#define SPEAR320_CLCD_BASE		UL(0x90000000)
-#define SPEAR320_PAR_PORT_BASE		UL(0xA0000000)
-#define SPEAR320_CAN0_BASE		UL(0xA1000000)
-#define SPEAR320_CAN1_BASE		UL(0xA2000000)
-#define SPEAR320_UART1_BASE		UL(0xA3000000)
-#define SPEAR320_UART2_BASE		UL(0xA4000000)
-#define SPEAR320_SSP0_BASE		UL(0xA5000000)
-#define SPEAR320_SSP1_BASE		UL(0xA6000000)
-#define SPEAR320_I2C_BASE		UL(0xA7000000)
-#define SPEAR320_PWM_BASE		UL(0xA8000000)
-#define SPEAR320_SMII0_BASE		UL(0xAA000000)
-#define SPEAR320_SMII1_BASE		UL(0xAB000000)
-#define SPEAR320_SOC_CONFIG_BASE	UL(0xB3000000)
-
-/* Interrupt registers offsets and masks */
-#define SPEAR320_INT_STS_MASK_REG		0x04
-#define SPEAR320_INT_CLR_MASK_REG		0x04
-#define SPEAR320_INT_ENB_MASK_REG		0x08
-#define SPEAR320_GPIO_IRQ_MASK			(1 << 0)
-#define SPEAR320_I2S_PLAY_IRQ_MASK		(1 << 1)
-#define SPEAR320_I2S_REC_IRQ_MASK		(1 << 2)
-#define SPEAR320_EMI_IRQ_MASK			(1 << 7)
-#define SPEAR320_CLCD_IRQ_MASK			(1 << 8)
-#define SPEAR320_SPP_IRQ_MASK			(1 << 9)
-#define SPEAR320_SDHCI_IRQ_MASK			(1 << 10)
-#define SPEAR320_CAN_U_IRQ_MASK			(1 << 11)
-#define SPEAR320_CAN_L_IRQ_MASK			(1 << 12)
-#define SPEAR320_UART1_IRQ_MASK			(1 << 13)
-#define SPEAR320_UART2_IRQ_MASK			(1 << 14)
-#define SPEAR320_SSP1_IRQ_MASK			(1 << 15)
-#define SPEAR320_SSP2_IRQ_MASK			(1 << 16)
-#define SPEAR320_SMII0_IRQ_MASK			(1 << 17)
-#define SPEAR320_MII1_SMII1_IRQ_MASK		(1 << 18)
-#define SPEAR320_WAKEUP_SMII0_IRQ_MASK		(1 << 19)
-#define SPEAR320_WAKEUP_MII1_SMII1_IRQ_MASK	(1 << 20)
-#define SPEAR320_I2C1_IRQ_MASK			(1 << 21)
-
-#define SPEAR320_SHIRQ_RAS1_MASK		0x000380
-#define SPEAR320_SHIRQ_RAS3_MASK		0x000007
-#define SPEAR320_SHIRQ_INTRCOMM_RAS_MASK	0x3FF800
-
-#endif /* __MACH_SPEAR320_H */
-
-#endif /* CONFIG_MACH_SPEAR320 */

arch/arm/mach-spear3xx/spear300.c

@@ -3,372 +3,62 @@
  *
  * SPEAr300 machine source file
  *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Copyright (C) 2009-2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
 
-#include <linux/types.h>
-#include <linux/amba/pl061.h>
-#include <linux/ptrace.h>
-#include <asm/irq.h>
+#define pr_fmt(fmt) "SPEAr300: " fmt
+
+#include <linux/amba/pl08x.h>
+#include <linux/of_platform.h>
+#include <asm/hardware/vic.h>
+#include <asm/mach/arch.h>
 #include <plat/shirq.h>
 #include <mach/generic.h>
-#include <mach/hardware.h>
-
-/* pad multiplexing support */
-/* muxing registers */
-#define PAD_MUX_CONFIG_REG	0x00
-#define MODE_CONFIG_REG		0x04
-
-/* modes */
-#define NAND_MODE			(1 << 0)
-#define NOR_MODE			(1 << 1)
-#define PHOTO_FRAME_MODE		(1 << 2)
-#define LEND_IP_PHONE_MODE		(1 << 3)
-#define HEND_IP_PHONE_MODE		(1 << 4)
-#define LEND_WIFI_PHONE_MODE		(1 << 5)
-#define HEND_WIFI_PHONE_MODE		(1 << 6)
-#define ATA_PABX_WI2S_MODE		(1 << 7)
-#define ATA_PABX_I2S_MODE		(1 << 8)
-#define CAML_LCDW_MODE			(1 << 9)
-#define CAMU_LCD_MODE			(1 << 10)
-#define CAMU_WLCD_MODE			(1 << 11)
-#define CAML_LCD_MODE			(1 << 12)
-#define ALL_MODES			0x1FFF
-
-struct pmx_mode spear300_nand_mode = {
-	.id = NAND_MODE,
-	.name = "nand mode",
-	.mask = 0x00,
-};
-
-struct pmx_mode spear300_nor_mode = {
-	.id = NOR_MODE,
-	.name = "nor mode",
-	.mask = 0x01,
-};
-
-struct pmx_mode spear300_photo_frame_mode = {
-	.id = PHOTO_FRAME_MODE,
-	.name = "photo frame mode",
-	.mask = 0x02,
-};
-
-struct pmx_mode spear300_lend_ip_phone_mode = {
-	.id = LEND_IP_PHONE_MODE,
-	.name = "lend ip phone mode",
-	.mask = 0x03,
-};
-
-struct pmx_mode spear300_hend_ip_phone_mode = {
-	.id = HEND_IP_PHONE_MODE,
-	.name = "hend ip phone mode",
-	.mask = 0x04,
-};
-
-struct pmx_mode spear300_lend_wifi_phone_mode = {
-	.id = LEND_WIFI_PHONE_MODE,
-	.name = "lend wifi phone mode",
-	.mask = 0x05,
-};
-
-struct pmx_mode spear300_hend_wifi_phone_mode = {
-	.id = HEND_WIFI_PHONE_MODE,
-	.name = "hend wifi phone mode",
-	.mask = 0x06,
-};
-
-struct pmx_mode spear300_ata_pabx_wi2s_mode = {
-	.id = ATA_PABX_WI2S_MODE,
-	.name = "ata pabx wi2s mode",
-	.mask = 0x07,
-};
-
-struct pmx_mode spear300_ata_pabx_i2s_mode = {
-	.id = ATA_PABX_I2S_MODE,
-	.name = "ata pabx i2s mode",
-	.mask = 0x08,
-};
-
-struct pmx_mode spear300_caml_lcdw_mode = {
-	.id = CAML_LCDW_MODE,
-	.name = "caml lcdw mode",
-	.mask = 0x0C,
-};
-
-struct pmx_mode spear300_camu_lcd_mode = {
-	.id = CAMU_LCD_MODE,
-	.name = "camu lcd mode",
-	.mask = 0x0D,
-};
-
-struct pmx_mode spear300_camu_wlcd_mode = {
-	.id = CAMU_WLCD_MODE,
-	.name = "camu wlcd mode",
-	.mask = 0x0E,
-};
-
-struct pmx_mode spear300_caml_lcd_mode = {
-	.id = CAML_LCD_MODE,
-	.name = "caml lcd mode",
-	.mask = 0x0F,
-};
-
-/* devices */
-static struct pmx_dev_mode pmx_fsmc_2_chips_modes[] = {
-	{
-		.ids = NAND_MODE | NOR_MODE | PHOTO_FRAME_MODE |
-			ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE,
-		.mask = PMX_FIRDA_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_fsmc_2_chips = {
-	.name = "fsmc_2_chips",
-	.modes = pmx_fsmc_2_chips_modes,
-	.mode_count = ARRAY_SIZE(pmx_fsmc_2_chips_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_fsmc_4_chips_modes[] = {
-	{
-		.ids = NAND_MODE | NOR_MODE | PHOTO_FRAME_MODE |
-			ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE,
-		.mask = PMX_FIRDA_MASK | PMX_UART0_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_fsmc_4_chips = {
-	.name = "fsmc_4_chips",
-	.modes = pmx_fsmc_4_chips_modes,
-	.mode_count = ARRAY_SIZE(pmx_fsmc_4_chips_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_keyboard_modes[] = {
-	{
-		.ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE |
-			LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE |
-			CAML_LCDW_MODE | CAMU_LCD_MODE | CAMU_WLCD_MODE |
-			CAML_LCD_MODE,
-		.mask = 0x0,
-	},
-};
-
-struct pmx_dev spear300_pmx_keyboard = {
-	.name = "keyboard",
-	.modes = pmx_keyboard_modes,
-	.mode_count = ARRAY_SIZE(pmx_keyboard_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_clcd_modes[] = {
-	{
-		.ids = PHOTO_FRAME_MODE,
-		.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK ,
-	}, {
-		.ids = HEND_IP_PHONE_MODE | HEND_WIFI_PHONE_MODE |
-			CAMU_LCD_MODE | CAML_LCD_MODE,
-		.mask = PMX_TIMER_3_4_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_clcd = {
-	.name = "clcd",
-	.modes = pmx_clcd_modes,
-	.mode_count = ARRAY_SIZE(pmx_clcd_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_gpio_modes[] = {
-	{
-		.ids = PHOTO_FRAME_MODE | CAMU_LCD_MODE | CAML_LCD_MODE,
-		.mask = PMX_MII_MASK,
-	}, {
-		.ids = LEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE,
-		.mask = PMX_MII_MASK | PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK,
-	}, {
-		.ids = ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_WLCD_MODE,
-		.mask = PMX_MII_MASK | PMX_TIMER_3_4_MASK,
-	}, {
-		.ids = HEND_IP_PHONE_MODE | HEND_WIFI_PHONE_MODE,
-		.mask = PMX_MII_MASK | PMX_TIMER_1_2_MASK,
-	}, {
-		.ids = ATA_PABX_WI2S_MODE,
-		.mask = PMX_MII_MASK | PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK
-			| PMX_UART0_MODEM_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_telecom_gpio = {
-	.name = "telecom_gpio",
-	.modes = pmx_telecom_gpio_modes,
-	.mode_count = ARRAY_SIZE(pmx_telecom_gpio_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_tdm_modes[] = {
-	{
-		.ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE |
-			HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE
-			| HEND_WIFI_PHONE_MODE | ATA_PABX_WI2S_MODE
-			| ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE
-			| CAMU_WLCD_MODE | CAML_LCD_MODE,
-		.mask = PMX_UART0_MODEM_MASK | PMX_SSP_CS_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_telecom_tdm = {
-	.name = "telecom_tdm",
-	.modes = pmx_telecom_tdm_modes,
-	.mode_count = ARRAY_SIZE(pmx_telecom_tdm_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_spi_cs_i2c_clk_modes[] = {
-	{
-		.ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE |
-			LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE
-			| ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE |
-			CAML_LCDW_MODE | CAML_LCD_MODE,
-		.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_telecom_spi_cs_i2c_clk = {
-	.name = "telecom_spi_cs_i2c_clk",
-	.modes = pmx_telecom_spi_cs_i2c_clk_modes,
-	.mode_count = ARRAY_SIZE(pmx_telecom_spi_cs_i2c_clk_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_camera_modes[] = {
-	{
-		.ids = CAML_LCDW_MODE | CAML_LCD_MODE,
-		.mask = PMX_MII_MASK,
-	}, {
-		.ids = CAMU_LCD_MODE | CAMU_WLCD_MODE,
-		.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK | PMX_MII_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_telecom_camera = {
-	.name = "telecom_camera",
-	.modes = pmx_telecom_camera_modes,
-	.mode_count = ARRAY_SIZE(pmx_telecom_camera_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_dac_modes[] = {
-	{
-		.ids = ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE
-			| CAMU_WLCD_MODE | CAML_LCD_MODE,
-		.mask = PMX_TIMER_1_2_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_telecom_dac = {
-	.name = "telecom_dac",
-	.modes = pmx_telecom_dac_modes,
-	.mode_count = ARRAY_SIZE(pmx_telecom_dac_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_i2s_modes[] = {
-	{
-		.ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE
-			| LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE |
-			ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE
-			| CAMU_WLCD_MODE | CAML_LCD_MODE,
-		.mask = PMX_UART0_MODEM_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_telecom_i2s = {
-	.name = "telecom_i2s",
-	.modes = pmx_telecom_i2s_modes,
-	.mode_count = ARRAY_SIZE(pmx_telecom_i2s_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_boot_pins_modes[] = {
-	{
-		.ids = NAND_MODE | NOR_MODE,
-		.mask = PMX_UART0_MODEM_MASK | PMX_TIMER_1_2_MASK |
-			PMX_TIMER_3_4_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_telecom_boot_pins = {
-	.name = "telecom_boot_pins",
-	.modes = pmx_telecom_boot_pins_modes,
-	.mode_count = ARRAY_SIZE(pmx_telecom_boot_pins_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_sdhci_4bit_modes[] = {
-	{
-		.ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE |
-			HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE |
-			HEND_WIFI_PHONE_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE |
-			CAMU_WLCD_MODE | CAML_LCD_MODE | ATA_PABX_WI2S_MODE |
-			ATA_PABX_I2S_MODE,
-		.mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK |
-			PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK |
-			PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_telecom_sdhci_4bit = {
-	.name = "telecom_sdhci_4bit",
-	.modes = pmx_telecom_sdhci_4bit_modes,
-	.mode_count = ARRAY_SIZE(pmx_telecom_sdhci_4bit_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_sdhci_8bit_modes[] = {
-	{
-		.ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE |
-			HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE |
-			HEND_WIFI_PHONE_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE |
-			CAMU_WLCD_MODE | CAML_LCD_MODE,
-		.mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK |
-			PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK |
-			PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK | PMX_MII_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_telecom_sdhci_8bit = {
-	.name = "telecom_sdhci_8bit",
-	.modes = pmx_telecom_sdhci_8bit_modes,
-	.mode_count = ARRAY_SIZE(pmx_telecom_sdhci_8bit_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_gpio1_modes[] = {
-	{
-		.ids = PHOTO_FRAME_MODE,
-		.mask = PMX_UART0_MODEM_MASK | PMX_TIMER_1_2_MASK |
-			PMX_TIMER_3_4_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_gpio1 = {
-	.name = "arm gpio1",
-	.modes = pmx_gpio1_modes,
-	.mode_count = ARRAY_SIZE(pmx_gpio1_modes),
-	.enb_on_reset = 1,
-};
-
-/* pmx driver structure */
-static struct pmx_driver pmx_driver = {
-	.mode_reg = {.offset = MODE_CONFIG_REG, .mask = 0x0000000f},
-	.mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff},
-};
+#include <mach/spear.h>
+
+/* Base address of various IPs */
+#define SPEAR300_TELECOM_BASE		UL(0x50000000)
+
+/* Interrupt registers offsets and masks */
+#define SPEAR300_INT_ENB_MASK_REG	0x54
+#define SPEAR300_INT_STS_MASK_REG	0x58
+#define SPEAR300_IT_PERS_S_IRQ_MASK	(1 << 0)
+#define SPEAR300_IT_CHANGE_S_IRQ_MASK	(1 << 1)
+#define SPEAR300_I2S_IRQ_MASK		(1 << 2)
+#define SPEAR300_TDM_IRQ_MASK		(1 << 3)
+#define SPEAR300_CAMERA_L_IRQ_MASK	(1 << 4)
+#define SPEAR300_CAMERA_F_IRQ_MASK	(1 << 5)
+#define SPEAR300_CAMERA_V_IRQ_MASK	(1 << 6)
+#define SPEAR300_KEYBOARD_IRQ_MASK	(1 << 7)
+#define SPEAR300_GPIO1_IRQ_MASK		(1 << 8)
+
+#define SPEAR300_SHIRQ_RAS1_MASK	0x1FF
+
+#define SPEAR300_SOC_CONFIG_BASE	UL(0x99000000)
+
+
+/* SPEAr300 Virtual irq definitions */
+/* IRQs sharing IRQ_GEN_RAS_1 */
+#define SPEAR300_VIRQ_IT_PERS_S			(SPEAR3XX_VIRQ_START + 0)
+#define SPEAR300_VIRQ_IT_CHANGE_S		(SPEAR3XX_VIRQ_START + 1)
+#define SPEAR300_VIRQ_I2S			(SPEAR3XX_VIRQ_START + 2)
+#define SPEAR300_VIRQ_TDM			(SPEAR3XX_VIRQ_START + 3)
+#define SPEAR300_VIRQ_CAMERA_L			(SPEAR3XX_VIRQ_START + 4)
+#define SPEAR300_VIRQ_CAMERA_F			(SPEAR3XX_VIRQ_START + 5)
+#define SPEAR300_VIRQ_CAMERA_V			(SPEAR3XX_VIRQ_START + 6)
+#define SPEAR300_VIRQ_KEYBOARD			(SPEAR3XX_VIRQ_START + 7)
+#define SPEAR300_VIRQ_GPIO1			(SPEAR3XX_VIRQ_START + 8)
+
+/* IRQs sharing IRQ_GEN_RAS_3 */
+#define SPEAR300_IRQ_CLCD			SPEAR3XX_IRQ_GEN_RAS_3
+
+/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
+#define SPEAR300_IRQ_SDHCI			SPEAR3XX_IRQ_INTRCOMM_RAS_ARM
 
 /* spear3xx shared irq */
 static struct shirq_dev_config shirq_ras1_config[] = {
@@ -423,45 +113,238 @@ static struct spear_shirq shirq_ras1 = {
 	},
 };
 
-/* Add spear300 specific devices here */
-/* arm gpio1 device registration */
-static struct pl061_platform_data gpio1_plat_data = {
-	.gpio_base	= 8,
-	.irq_base	= SPEAR300_GPIO1_INT_BASE,
+/* DMAC platform data's slave info */
+struct pl08x_channel_data spear300_dma_info[] = {
+	{
+		.bus_id = "uart0_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart0_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp0_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp0_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "i2c_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "i2c_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "irda",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "adc",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "to_jpeg",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "from_jpeg",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras0_rx",
+		.min_signal = 0,
+		.max_signal = 0,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras0_tx",
+		.min_signal = 1,
+		.max_signal = 1,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras1_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras1_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras2_rx",
+		.min_signal = 4,
+		.max_signal = 4,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras2_tx",
+		.min_signal = 5,
+		.max_signal = 5,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras3_rx",
+		.min_signal = 6,
+		.max_signal = 6,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras3_tx",
+		.min_signal = 7,
+		.max_signal = 7,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras4_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras4_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras5_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras5_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras6_rx",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras6_tx",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras7_rx",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras7_tx",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	},
 };
 
-AMBA_APB_DEVICE(spear300_gpio1, "gpio1", 0, SPEAR300_GPIO_BASE,
-	{SPEAR300_VIRQ_GPIO1}, &gpio1_plat_data);
+/* Add SPEAr300 auxdata to pass platform data */
+static struct of_dev_auxdata spear300_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL,
+			&pl022_plat_data),
+	OF_DEV_AUXDATA("arm,pl080", SPEAR3XX_ICM3_DMA_BASE, NULL,
+			&pl080_plat_data),
+	{}
+};
 
-/* spear300 routines */
-void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
-		u8 pmx_dev_count)
+static void __init spear300_dt_init(void)
 {
-	int ret = 0;
+	int ret;
+
+	pl080_plat_data.slave_channels = spear300_dma_info;
+	pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear300_dma_info);
 
-	/* call spear3xx family common init function */
-	spear3xx_init();
+	of_platform_populate(NULL, of_default_bus_match_table,
+			spear300_auxdata_lookup, NULL);
 
 	/* shared irq registration */
 	shirq_ras1.regs.base = ioremap(SPEAR300_TELECOM_BASE, SZ_4K);
 	if (shirq_ras1.regs.base) {
 		ret = spear_shirq_register(&shirq_ras1);
 		if (ret)
-			printk(KERN_ERR "Error registering Shared IRQ\n");
+			pr_err("Error registering Shared IRQ\n");
 	}
+}
 
-	/* pmx initialization */
-	pmx_driver.mode = pmx_mode;
-	pmx_driver.devs = pmx_devs;
-	pmx_driver.devs_count = pmx_dev_count;
+static const char * const spear300_dt_board_compat[] = {
+	"st,spear300",
+	"st,spear300-evb",
+	NULL,
+};
 
-	pmx_driver.base = ioremap(SPEAR300_SOC_CONFIG_BASE, SZ_4K);
-	if (pmx_driver.base) {
-		ret = pmx_register(&pmx_driver);
-		if (ret)
-			printk(KERN_ERR "padmux: registration failed. err no"
-					": %d\n", ret);
-		/* Free Mapping, device selection already done */
-		iounmap(pmx_driver.base);
-	}
+static void __init spear300_map_io(void)
+{
+	spear3xx_map_io();
 }
+
+DT_MACHINE_START(SPEAR300_DT, "ST SPEAr300 SoC with Flattened Device Tree")
+	.map_io		=	spear300_map_io,
+	.init_irq	=	spear3xx_dt_init_irq,
+	.handle_irq	=	vic_handle_irq,
+	.timer		=	&spear3xx_timer,
+	.init_machine	=	spear300_dt_init,
+	.restart	=	spear_restart,
+	.dt_compat	=	spear300_dt_board_compat,
+MACHINE_END

arch/arm/mach-spear3xx/spear300_evb.c

@@ -1,75 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/spear300_evb.c
- *
- * SPEAr300 evaluation board source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/hardware/vic.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-#include <mach/generic.h>
-#include <mach/hardware.h>
-
-/* padmux devices to enable */
-static struct pmx_dev *pmx_devs[] = {
-	/* spear3xx specific devices */
-	&spear3xx_pmx_i2c,
-	&spear3xx_pmx_ssp_cs,
-	&spear3xx_pmx_ssp,
-	&spear3xx_pmx_mii,
-	&spear3xx_pmx_uart0,
-
-	/* spear300 specific devices */
-	&spear300_pmx_fsmc_2_chips,
-	&spear300_pmx_clcd,
-	&spear300_pmx_telecom_sdhci_4bit,
-	&spear300_pmx_gpio1,
-};
-
-static struct amba_device *amba_devs[] __initdata = {
-	/* spear3xx specific devices */
-	&spear3xx_gpio_device,
-	&spear3xx_uart_device,
-
-	/* spear300 specific devices */
-	&spear300_gpio1_device,
-};
-
-static struct platform_device *plat_devs[] __initdata = {
-	/* spear3xx specific devices */
-
-	/* spear300 specific devices */
-};
-
-static void __init spear300_evb_init(void)
-{
-	unsigned int i;
-
-	/* call spear300 machine init function */
-	spear300_init(&spear300_photo_frame_mode, pmx_devs,
-			ARRAY_SIZE(pmx_devs));
-
-	/* Add Platform Devices */
-	platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
-
-	/* Add Amba Devices */
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
-		amba_device_register(amba_devs[i], &iomem_resource);
-}
-
-MACHINE_START(SPEAR300, "ST-SPEAR300-EVB")
-	.atag_offset	=	0x100,
-	.map_io		=	spear3xx_map_io,
-	.init_irq	=	spear3xx_init_irq,
-	.handle_irq	=	vic_handle_irq,
-	.timer		=	&spear3xx_timer,
-	.init_machine	=	spear300_evb_init,
-	.restart	=	spear_restart,
-MACHINE_END

arch/arm/mach-spear3xx/spear310.c

@@ -3,141 +3,84 @@
  *
  * SPEAr310 machine source file
  *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Copyright (C) 2009-2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
 
-#include <linux/ptrace.h>
-#include <asm/irq.h>
+#define pr_fmt(fmt) "SPEAr310: " fmt
+
+#include <linux/amba/pl08x.h>
+#include <linux/amba/serial.h>
+#include <linux/of_platform.h>
+#include <asm/hardware/vic.h>
+#include <asm/mach/arch.h>
 #include <plat/shirq.h>
 #include <mach/generic.h>
-#include <mach/hardware.h>
-
-/* pad multiplexing support */
-/* muxing registers */
-#define PAD_MUX_CONFIG_REG	0x08
-
-/* devices */
-static struct pmx_dev_mode pmx_emi_cs_0_1_4_5_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_TIMER_3_4_MASK,
-	},
-};
-
-struct pmx_dev spear310_pmx_emi_cs_0_1_4_5 = {
-	.name = "emi_cs_0_1_4_5",
-	.modes = pmx_emi_cs_0_1_4_5_modes,
-	.mode_count = ARRAY_SIZE(pmx_emi_cs_0_1_4_5_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_emi_cs_2_3_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_TIMER_1_2_MASK,
-	},
-};
-
-struct pmx_dev spear310_pmx_emi_cs_2_3 = {
-	.name = "emi_cs_2_3",
-	.modes = pmx_emi_cs_2_3_modes,
-	.mode_count = ARRAY_SIZE(pmx_emi_cs_2_3_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_uart1_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_FIRDA_MASK,
-	},
-};
-
-struct pmx_dev spear310_pmx_uart1 = {
-	.name = "uart1",
-	.modes = pmx_uart1_modes,
-	.mode_count = ARRAY_SIZE(pmx_uart1_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_uart2_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_TIMER_1_2_MASK,
-	},
-};
-
-struct pmx_dev spear310_pmx_uart2 = {
-	.name = "uart2",
-	.modes = pmx_uart2_modes,
-	.mode_count = ARRAY_SIZE(pmx_uart2_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_uart3_4_5_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_UART0_MODEM_MASK,
-	},
-};
-
-struct pmx_dev spear310_pmx_uart3_4_5 = {
-	.name = "uart3_4_5",
-	.modes = pmx_uart3_4_5_modes,
-	.mode_count = ARRAY_SIZE(pmx_uart3_4_5_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_fsmc_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_SSP_CS_MASK,
-	},
-};
-
-struct pmx_dev spear310_pmx_fsmc = {
-	.name = "fsmc",
-	.modes = pmx_fsmc_modes,
-	.mode_count = ARRAY_SIZE(pmx_fsmc_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_rs485_0_1_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_MII_MASK,
-	},
-};
-
-struct pmx_dev spear310_pmx_rs485_0_1 = {
-	.name = "rs485_0_1",
-	.modes = pmx_rs485_0_1_modes,
-	.mode_count = ARRAY_SIZE(pmx_rs485_0_1_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_tdm0_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_MII_MASK,
-	},
-};
-
-struct pmx_dev spear310_pmx_tdm0 = {
-	.name = "tdm0",
-	.modes = pmx_tdm0_modes,
-	.mode_count = ARRAY_SIZE(pmx_tdm0_modes),
-	.enb_on_reset = 1,
-};
+#include <mach/spear.h>
+
+#define SPEAR310_UART1_BASE		UL(0xB2000000)
+#define SPEAR310_UART2_BASE		UL(0xB2080000)
+#define SPEAR310_UART3_BASE		UL(0xB2100000)
+#define SPEAR310_UART4_BASE		UL(0xB2180000)
+#define SPEAR310_UART5_BASE		UL(0xB2200000)
+#define SPEAR310_SOC_CONFIG_BASE	UL(0xB4000000)
+
+/* Interrupt registers offsets and masks */
+#define SPEAR310_INT_STS_MASK_REG	0x04
+#define SPEAR310_SMII0_IRQ_MASK		(1 << 0)
+#define SPEAR310_SMII1_IRQ_MASK		(1 << 1)
+#define SPEAR310_SMII2_IRQ_MASK		(1 << 2)
+#define SPEAR310_SMII3_IRQ_MASK		(1 << 3)
+#define SPEAR310_WAKEUP_SMII0_IRQ_MASK	(1 << 4)
+#define SPEAR310_WAKEUP_SMII1_IRQ_MASK	(1 << 5)
+#define SPEAR310_WAKEUP_SMII2_IRQ_MASK	(1 << 6)
+#define SPEAR310_WAKEUP_SMII3_IRQ_MASK	(1 << 7)
+#define SPEAR310_UART1_IRQ_MASK		(1 << 8)
+#define SPEAR310_UART2_IRQ_MASK		(1 << 9)
+#define SPEAR310_UART3_IRQ_MASK		(1 << 10)
+#define SPEAR310_UART4_IRQ_MASK		(1 << 11)
+#define SPEAR310_UART5_IRQ_MASK		(1 << 12)
+#define SPEAR310_EMI_IRQ_MASK		(1 << 13)
+#define SPEAR310_TDM_HDLC_IRQ_MASK	(1 << 14)
+#define SPEAR310_RS485_0_IRQ_MASK	(1 << 15)
+#define SPEAR310_RS485_1_IRQ_MASK	(1 << 16)
+
+#define SPEAR310_SHIRQ_RAS1_MASK	0x000FF
+#define SPEAR310_SHIRQ_RAS2_MASK	0x01F00
+#define SPEAR310_SHIRQ_RAS3_MASK	0x02000
+#define SPEAR310_SHIRQ_INTRCOMM_RAS_MASK	0x1C000
+
+/* SPEAr310 Virtual irq definitions */
+/* IRQs sharing IRQ_GEN_RAS_1 */
+#define SPEAR310_VIRQ_SMII0			(SPEAR3XX_VIRQ_START + 0)
+#define SPEAR310_VIRQ_SMII1			(SPEAR3XX_VIRQ_START + 1)
+#define SPEAR310_VIRQ_SMII2			(SPEAR3XX_VIRQ_START + 2)
+#define SPEAR310_VIRQ_SMII3			(SPEAR3XX_VIRQ_START + 3)
+#define SPEAR310_VIRQ_WAKEUP_SMII0		(SPEAR3XX_VIRQ_START + 4)
+#define SPEAR310_VIRQ_WAKEUP_SMII1		(SPEAR3XX_VIRQ_START + 5)
+#define SPEAR310_VIRQ_WAKEUP_SMII2		(SPEAR3XX_VIRQ_START + 6)
+#define SPEAR310_VIRQ_WAKEUP_SMII3		(SPEAR3XX_VIRQ_START + 7)
+
+/* IRQs sharing IRQ_GEN_RAS_2 */
+#define SPEAR310_VIRQ_UART1			(SPEAR3XX_VIRQ_START + 8)
+#define SPEAR310_VIRQ_UART2			(SPEAR3XX_VIRQ_START + 9)
+#define SPEAR310_VIRQ_UART3			(SPEAR3XX_VIRQ_START + 10)
+#define SPEAR310_VIRQ_UART4			(SPEAR3XX_VIRQ_START + 11)
+#define SPEAR310_VIRQ_UART5			(SPEAR3XX_VIRQ_START + 12)
+
+/* IRQs sharing IRQ_GEN_RAS_3 */
+#define SPEAR310_VIRQ_EMI			(SPEAR3XX_VIRQ_START + 13)
+#define SPEAR310_VIRQ_PLGPIO			(SPEAR3XX_VIRQ_START + 14)
+
+/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
+#define SPEAR310_VIRQ_TDM_HDLC			(SPEAR3XX_VIRQ_START + 15)
+#define SPEAR310_VIRQ_RS485_0			(SPEAR3XX_VIRQ_START + 16)
+#define SPEAR310_VIRQ_RS485_1			(SPEAR3XX_VIRQ_START + 17)
 
-/* pmx driver structure */
-static struct pmx_driver pmx_driver = {
-	.mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff},
-};
 
 /* spear3xx shared irq */
 static struct shirq_dev_config shirq_ras1_config[] = {
@@ -255,17 +198,247 @@ static struct spear_shirq shirq_intrcomm_ras = {
 	},
 };
 
-/* Add spear310 specific devices here */
+/* DMAC platform data's slave info */
+struct pl08x_channel_data spear310_dma_info[] = {
+	{
+		.bus_id = "uart0_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart0_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp0_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp0_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "i2c_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "i2c_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "irda",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "adc",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "to_jpeg",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "from_jpeg",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart1_rx",
+		.min_signal = 0,
+		.max_signal = 0,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart1_tx",
+		.min_signal = 1,
+		.max_signal = 1,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart2_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart2_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart3_rx",
+		.min_signal = 4,
+		.max_signal = 4,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart3_tx",
+		.min_signal = 5,
+		.max_signal = 5,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart4_rx",
+		.min_signal = 6,
+		.max_signal = 6,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart4_tx",
+		.min_signal = 7,
+		.max_signal = 7,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart5_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart5_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras5_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras5_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras6_rx",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras6_tx",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras7_rx",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras7_tx",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	},
+};
 
-/* spear310 routines */
-void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
-		u8 pmx_dev_count)
+/* uart devices plat data */
+static struct amba_pl011_data spear310_uart_data[] = {
+	{
+		.dma_filter = pl08x_filter_id,
+		.dma_tx_param = "uart1_tx",
+		.dma_rx_param = "uart1_rx",
+	}, {
+		.dma_filter = pl08x_filter_id,
+		.dma_tx_param = "uart2_tx",
+		.dma_rx_param = "uart2_rx",
+	}, {
+		.dma_filter = pl08x_filter_id,
+		.dma_tx_param = "uart3_tx",
+		.dma_rx_param = "uart3_rx",
+	}, {
+		.dma_filter = pl08x_filter_id,
+		.dma_tx_param = "uart4_tx",
+		.dma_rx_param = "uart4_rx",
+	}, {
+		.dma_filter = pl08x_filter_id,
+		.dma_tx_param = "uart5_tx",
+		.dma_rx_param = "uart5_rx",
+	},
+};
+
+/* Add SPEAr310 auxdata to pass platform data */
+static struct of_dev_auxdata spear310_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL,
+			&pl022_plat_data),
+	OF_DEV_AUXDATA("arm,pl080", SPEAR3XX_ICM3_DMA_BASE, NULL,
+			&pl080_plat_data),
+	OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART1_BASE, NULL,
+			&spear310_uart_data[0]),
+	OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART2_BASE, NULL,
+			&spear310_uart_data[1]),
+	OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART3_BASE, NULL,
+			&spear310_uart_data[2]),
+	OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART4_BASE, NULL,
+			&spear310_uart_data[3]),
+	OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART5_BASE, NULL,
+			&spear310_uart_data[4]),
+	{}
+};
+
+static void __init spear310_dt_init(void)
 {
 	void __iomem *base;
-	int ret = 0;
+	int ret;
 
-	/* call spear3xx family common init function */
-	spear3xx_init();
+	pl080_plat_data.slave_channels = spear310_dma_info;
+	pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear310_dma_info);
+
+	of_platform_populate(NULL, of_default_bus_match_table,
+			spear310_auxdata_lookup, NULL);
 
 	/* shared irq registration */
 	base = ioremap(SPEAR310_SOC_CONFIG_BASE, SZ_4K);
@@ -274,35 +447,45 @@ void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
 		shirq_ras1.regs.base = base;
 		ret = spear_shirq_register(&shirq_ras1);
 		if (ret)
-			printk(KERN_ERR "Error registering Shared IRQ 1\n");
+			pr_err("Error registering Shared IRQ 1\n");
 
 		/* shirq 2 */
 		shirq_ras2.regs.base = base;
 		ret = spear_shirq_register(&shirq_ras2);
 		if (ret)
-			printk(KERN_ERR "Error registering Shared IRQ 2\n");
+			pr_err("Error registering Shared IRQ 2\n");
 
 		/* shirq 3 */
 		shirq_ras3.regs.base = base;
 		ret = spear_shirq_register(&shirq_ras3);
 		if (ret)
-			printk(KERN_ERR "Error registering Shared IRQ 3\n");
+			pr_err("Error registering Shared IRQ 3\n");
 
 		/* shirq 4 */
 		shirq_intrcomm_ras.regs.base = base;
 		ret = spear_shirq_register(&shirq_intrcomm_ras);
 		if (ret)
-			printk(KERN_ERR "Error registering Shared IRQ 4\n");
+			pr_err("Error registering Shared IRQ 4\n");
 	}
+}
 
-	/* pmx initialization */
-	pmx_driver.base = base;
-	pmx_driver.mode = pmx_mode;
-	pmx_driver.devs = pmx_devs;
-	pmx_driver.devs_count = pmx_dev_count;
+static const char * const spear310_dt_board_compat[] = {
+	"st,spear310",
+	"st,spear310-evb",
+	NULL,
+};
 
-	ret = pmx_register(&pmx_driver);
-	if (ret)
-		printk(KERN_ERR "padmux: registration failed. err no: %d\n",
-				ret);
+static void __init spear310_map_io(void)
+{
+	spear3xx_map_io();
 }
+
+DT_MACHINE_START(SPEAR310_DT, "ST SPEAr310 SoC with Flattened Device Tree")
+	.map_io		=	spear310_map_io,
+	.init_irq	=	spear3xx_dt_init_irq,
+	.handle_irq	=	vic_handle_irq,
+	.timer		=	&spear3xx_timer,
+	.init_machine	=	spear310_dt_init,
+	.restart	=	spear_restart,
+	.dt_compat	=	spear310_dt_board_compat,
+MACHINE_END

arch/arm/mach-spear3xx/spear310_evb.c

@@ -1,81 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/spear310_evb.c
- *
- * SPEAr310 evaluation board source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/hardware/vic.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-#include <mach/generic.h>
-#include <mach/hardware.h>
-
-/* padmux devices to enable */
-static struct pmx_dev *pmx_devs[] = {
-	/* spear3xx specific devices */
-	&spear3xx_pmx_i2c,
-	&spear3xx_pmx_ssp,
-	&spear3xx_pmx_gpio_pin0,
-	&spear3xx_pmx_gpio_pin1,
-	&spear3xx_pmx_gpio_pin2,
-	&spear3xx_pmx_gpio_pin3,
-	&spear3xx_pmx_gpio_pin4,
-	&spear3xx_pmx_gpio_pin5,
-	&spear3xx_pmx_uart0,
-
-	/* spear310 specific devices */
-	&spear310_pmx_emi_cs_0_1_4_5,
-	&spear310_pmx_emi_cs_2_3,
-	&spear310_pmx_uart1,
-	&spear310_pmx_uart2,
-	&spear310_pmx_uart3_4_5,
-	&spear310_pmx_fsmc,
-	&spear310_pmx_rs485_0_1,
-	&spear310_pmx_tdm0,
-};
-
-static struct amba_device *amba_devs[] __initdata = {
-	/* spear3xx specific devices */
-	&spear3xx_gpio_device,
-	&spear3xx_uart_device,
-
-	/* spear310 specific devices */
-};
-
-static struct platform_device *plat_devs[] __initdata = {
-	/* spear3xx specific devices */
-
-	/* spear310 specific devices */
-};
-
-static void __init spear310_evb_init(void)
-{
-	unsigned int i;
-
-	/* call spear310 machine init function */
-	spear310_init(NULL, pmx_devs, ARRAY_SIZE(pmx_devs));
-
-	/* Add Platform Devices */
-	platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
-
-	/* Add Amba Devices */
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
-		amba_device_register(amba_devs[i], &iomem_resource);
-}
-
-MACHINE_START(SPEAR310, "ST-SPEAR310-EVB")
-	.atag_offset	=	0x100,
-	.map_io		=	spear3xx_map_io,
-	.init_irq	=	spear3xx_init_irq,
-	.handle_irq	=	vic_handle_irq,
-	.timer		=	&spear3xx_timer,
-	.init_machine	=	spear310_evb_init,
-	.restart	=	spear_restart,
-MACHINE_END

arch/arm/mach-spear3xx/spear320.c

@@ -3,386 +3,84 @@
  *
  * SPEAr320 machine source file
  *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Copyright (C) 2009-2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
 
-#include <linux/ptrace.h>
-#include <asm/irq.h>
+#define pr_fmt(fmt) "SPEAr320: " fmt
+
+#include <linux/amba/pl022.h>
+#include <linux/amba/pl08x.h>
+#include <linux/amba/serial.h>
+#include <linux/of_platform.h>
+#include <asm/hardware/vic.h>
+#include <asm/mach/arch.h>
 #include <plat/shirq.h>
 #include <mach/generic.h>
-#include <mach/hardware.h>
-
-/* pad multiplexing support */
-/* muxing registers */
-#define PAD_MUX_CONFIG_REG	0x0C
-#define MODE_CONFIG_REG		0x10
-
-/* modes */
-#define AUTO_NET_SMII_MODE	(1 << 0)
-#define AUTO_NET_MII_MODE	(1 << 1)
-#define AUTO_EXP_MODE		(1 << 2)
-#define SMALL_PRINTERS_MODE	(1 << 3)
-#define ALL_MODES		0xF
-
-struct pmx_mode spear320_auto_net_smii_mode = {
-	.id = AUTO_NET_SMII_MODE,
-	.name = "Automation Networking SMII Mode",
-	.mask = 0x00,
-};
-
-struct pmx_mode spear320_auto_net_mii_mode = {
-	.id = AUTO_NET_MII_MODE,
-	.name = "Automation Networking MII Mode",
-	.mask = 0x01,
-};
-
-struct pmx_mode spear320_auto_exp_mode = {
-	.id = AUTO_EXP_MODE,
-	.name = "Automation Expanded Mode",
-	.mask = 0x02,
-};
-
-struct pmx_mode spear320_small_printers_mode = {
-	.id = SMALL_PRINTERS_MODE,
-	.name = "Small Printers Mode",
-	.mask = 0x03,
-};
-
-/* devices */
-static struct pmx_dev_mode pmx_clcd_modes[] = {
-	{
-		.ids = AUTO_NET_SMII_MODE,
-		.mask = 0x0,
-	},
-};
-
-struct pmx_dev spear320_pmx_clcd = {
-	.name = "clcd",
-	.modes = pmx_clcd_modes,
-	.mode_count = ARRAY_SIZE(pmx_clcd_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_emi_modes[] = {
-	{
-		.ids = AUTO_EXP_MODE,
-		.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_emi = {
-	.name = "emi",
-	.modes = pmx_emi_modes,
-	.mode_count = ARRAY_SIZE(pmx_emi_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_fsmc_modes[] = {
-	{
-		.ids = ALL_MODES,
-		.mask = 0x0,
-	},
-};
-
-struct pmx_dev spear320_pmx_fsmc = {
-	.name = "fsmc",
-	.modes = pmx_fsmc_modes,
-	.mode_count = ARRAY_SIZE(pmx_fsmc_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_spp_modes[] = {
-	{
-		.ids = SMALL_PRINTERS_MODE,
-		.mask = 0x0,
-	},
-};
-
-struct pmx_dev spear320_pmx_spp = {
-	.name = "spp",
-	.modes = pmx_spp_modes,
-	.mode_count = ARRAY_SIZE(pmx_spp_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_sdhci_modes[] = {
-	{
-		.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE |
-			SMALL_PRINTERS_MODE,
-		.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_sdhci = {
-	.name = "sdhci",
-	.modes = pmx_sdhci_modes,
-	.mode_count = ARRAY_SIZE(pmx_sdhci_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_i2s_modes[] = {
-	{
-		.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
-		.mask = PMX_UART0_MODEM_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_i2s = {
-	.name = "i2s",
-	.modes = pmx_i2s_modes,
-	.mode_count = ARRAY_SIZE(pmx_i2s_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_uart1_modes[] = {
-	{
-		.ids = ALL_MODES,
-		.mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_uart1 = {
-	.name = "uart1",
-	.modes = pmx_uart1_modes,
-	.mode_count = ARRAY_SIZE(pmx_uart1_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_uart1_modem_modes[] = {
-	{
-		.ids = AUTO_EXP_MODE,
-		.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK |
-			PMX_SSP_CS_MASK,
-	}, {
-		.ids = SMALL_PRINTERS_MODE,
-		.mask = PMX_GPIO_PIN3_MASK | PMX_GPIO_PIN4_MASK |
-			PMX_GPIO_PIN5_MASK | PMX_SSP_CS_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_uart1_modem = {
-	.name = "uart1_modem",
-	.modes = pmx_uart1_modem_modes,
-	.mode_count = ARRAY_SIZE(pmx_uart1_modem_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_uart2_modes[] = {
-	{
-		.ids = ALL_MODES,
-		.mask = PMX_FIRDA_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_uart2 = {
-	.name = "uart2",
-	.modes = pmx_uart2_modes,
-	.mode_count = ARRAY_SIZE(pmx_uart2_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_touchscreen_modes[] = {
-	{
-		.ids = AUTO_NET_SMII_MODE,
-		.mask = PMX_SSP_CS_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_touchscreen = {
-	.name = "touchscreen",
-	.modes = pmx_touchscreen_modes,
-	.mode_count = ARRAY_SIZE(pmx_touchscreen_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_can_modes[] = {
-	{
-		.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE | AUTO_EXP_MODE,
-		.mask = PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK |
-			PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_can = {
-	.name = "can",
-	.modes = pmx_can_modes,
-	.mode_count = ARRAY_SIZE(pmx_can_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_sdhci_led_modes[] = {
-	{
-		.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
-		.mask = PMX_SSP_CS_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_sdhci_led = {
-	.name = "sdhci_led",
-	.modes = pmx_sdhci_led_modes,
-	.mode_count = ARRAY_SIZE(pmx_sdhci_led_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_pwm0_modes[] = {
-	{
-		.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
-		.mask = PMX_UART0_MODEM_MASK,
-	}, {
-		.ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE,
-		.mask = PMX_MII_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_pwm0 = {
-	.name = "pwm0",
-	.modes = pmx_pwm0_modes,
-	.mode_count = ARRAY_SIZE(pmx_pwm0_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_pwm1_modes[] = {
-	{
-		.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
-		.mask = PMX_UART0_MODEM_MASK,
-	}, {
-		.ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE,
-		.mask = PMX_MII_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_pwm1 = {
-	.name = "pwm1",
-	.modes = pmx_pwm1_modes,
-	.mode_count = ARRAY_SIZE(pmx_pwm1_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_pwm2_modes[] = {
-	{
-		.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
-		.mask = PMX_SSP_CS_MASK,
-	}, {
-		.ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE,
-		.mask = PMX_MII_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_pwm2 = {
-	.name = "pwm2",
-	.modes = pmx_pwm2_modes,
-	.mode_count = ARRAY_SIZE(pmx_pwm2_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_pwm3_modes[] = {
-	{
-		.ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE | AUTO_NET_SMII_MODE,
-		.mask = PMX_MII_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_pwm3 = {
-	.name = "pwm3",
-	.modes = pmx_pwm3_modes,
-	.mode_count = ARRAY_SIZE(pmx_pwm3_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_ssp1_modes[] = {
-	{
-		.ids = SMALL_PRINTERS_MODE | AUTO_NET_SMII_MODE,
-		.mask = PMX_MII_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_ssp1 = {
-	.name = "ssp1",
-	.modes = pmx_ssp1_modes,
-	.mode_count = ARRAY_SIZE(pmx_ssp1_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_ssp2_modes[] = {
-	{
-		.ids = AUTO_NET_SMII_MODE,
-		.mask = PMX_MII_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_ssp2 = {
-	.name = "ssp2",
-	.modes = pmx_ssp2_modes,
-	.mode_count = ARRAY_SIZE(pmx_ssp2_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_mii1_modes[] = {
-	{
-		.ids = AUTO_NET_MII_MODE,
-		.mask = 0x0,
-	},
-};
-
-struct pmx_dev spear320_pmx_mii1 = {
-	.name = "mii1",
-	.modes = pmx_mii1_modes,
-	.mode_count = ARRAY_SIZE(pmx_mii1_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_smii0_modes[] = {
-	{
-		.ids = AUTO_NET_SMII_MODE | AUTO_EXP_MODE | SMALL_PRINTERS_MODE,
-		.mask = PMX_MII_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_smii0 = {
-	.name = "smii0",
-	.modes = pmx_smii0_modes,
-	.mode_count = ARRAY_SIZE(pmx_smii0_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_smii1_modes[] = {
-	{
-		.ids = AUTO_NET_SMII_MODE | SMALL_PRINTERS_MODE,
-		.mask = PMX_MII_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_smii1 = {
-	.name = "smii1",
-	.modes = pmx_smii1_modes,
-	.mode_count = ARRAY_SIZE(pmx_smii1_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_i2c1_modes[] = {
-	{
-		.ids = AUTO_EXP_MODE,
-		.mask = 0x0,
-	},
-};
-
-struct pmx_dev spear320_pmx_i2c1 = {
-	.name = "i2c1",
-	.modes = pmx_i2c1_modes,
-	.mode_count = ARRAY_SIZE(pmx_i2c1_modes),
-	.enb_on_reset = 1,
-};
-
-/* pmx driver structure */
-static struct pmx_driver pmx_driver = {
-	.mode_reg = {.offset = MODE_CONFIG_REG, .mask = 0x00000007},
-	.mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff},
-};
+#include <mach/spear.h>
+
+#define SPEAR320_UART1_BASE		UL(0xA3000000)
+#define SPEAR320_UART2_BASE		UL(0xA4000000)
+#define SPEAR320_SSP0_BASE		UL(0xA5000000)
+#define SPEAR320_SSP1_BASE		UL(0xA6000000)
+
+/* Interrupt registers offsets and masks */
+#define SPEAR320_INT_STS_MASK_REG		0x04
+#define SPEAR320_INT_CLR_MASK_REG		0x04
+#define SPEAR320_INT_ENB_MASK_REG		0x08
+#define SPEAR320_GPIO_IRQ_MASK			(1 << 0)
+#define SPEAR320_I2S_PLAY_IRQ_MASK		(1 << 1)
+#define SPEAR320_I2S_REC_IRQ_MASK		(1 << 2)
+#define SPEAR320_EMI_IRQ_MASK			(1 << 7)
+#define SPEAR320_CLCD_IRQ_MASK			(1 << 8)
+#define SPEAR320_SPP_IRQ_MASK			(1 << 9)
+#define SPEAR320_SDHCI_IRQ_MASK			(1 << 10)
+#define SPEAR320_CAN_U_IRQ_MASK			(1 << 11)
+#define SPEAR320_CAN_L_IRQ_MASK			(1 << 12)
+#define SPEAR320_UART1_IRQ_MASK			(1 << 13)
+#define SPEAR320_UART2_IRQ_MASK			(1 << 14)
+#define SPEAR320_SSP1_IRQ_MASK			(1 << 15)
+#define SPEAR320_SSP2_IRQ_MASK			(1 << 16)
+#define SPEAR320_SMII0_IRQ_MASK			(1 << 17)
+#define SPEAR320_MII1_SMII1_IRQ_MASK		(1 << 18)
+#define SPEAR320_WAKEUP_SMII0_IRQ_MASK		(1 << 19)
+#define SPEAR320_WAKEUP_MII1_SMII1_IRQ_MASK	(1 << 20)
+#define SPEAR320_I2C1_IRQ_MASK			(1 << 21)
+
+#define SPEAR320_SHIRQ_RAS1_MASK		0x000380
+#define SPEAR320_SHIRQ_RAS3_MASK		0x000007
+#define SPEAR320_SHIRQ_INTRCOMM_RAS_MASK	0x3FF800
+
+/* SPEAr320 Virtual irq definitions */
+/* IRQs sharing IRQ_GEN_RAS_1 */
+#define SPEAR320_VIRQ_EMI			(SPEAR3XX_VIRQ_START + 0)
+#define SPEAR320_VIRQ_CLCD			(SPEAR3XX_VIRQ_START + 1)
+#define SPEAR320_VIRQ_SPP			(SPEAR3XX_VIRQ_START + 2)
+
+/* IRQs sharing IRQ_GEN_RAS_2 */
+#define SPEAR320_IRQ_SDHCI			SPEAR3XX_IRQ_GEN_RAS_2
+
+/* IRQs sharing IRQ_GEN_RAS_3 */
+#define SPEAR320_VIRQ_PLGPIO			(SPEAR3XX_VIRQ_START + 3)
+#define SPEAR320_VIRQ_I2S_PLAY			(SPEAR3XX_VIRQ_START + 4)
+#define SPEAR320_VIRQ_I2S_REC			(SPEAR3XX_VIRQ_START + 5)
+
+/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
+#define SPEAR320_VIRQ_CANU			(SPEAR3XX_VIRQ_START + 6)
+#define SPEAR320_VIRQ_CANL			(SPEAR3XX_VIRQ_START + 7)
+#define SPEAR320_VIRQ_UART1			(SPEAR3XX_VIRQ_START + 8)
+#define SPEAR320_VIRQ_UART2			(SPEAR3XX_VIRQ_START + 9)
+#define SPEAR320_VIRQ_SSP1			(SPEAR3XX_VIRQ_START + 10)
+#define SPEAR320_VIRQ_SSP2			(SPEAR3XX_VIRQ_START + 11)
+#define SPEAR320_VIRQ_SMII0			(SPEAR3XX_VIRQ_START + 12)
+#define SPEAR320_VIRQ_MII1_SMII1		(SPEAR3XX_VIRQ_START + 13)
+#define SPEAR320_VIRQ_WAKEUP_SMII0		(SPEAR3XX_VIRQ_START + 14)
+#define SPEAR320_VIRQ_WAKEUP_MII1_SMII1		(SPEAR3XX_VIRQ_START + 15)
+#define SPEAR320_VIRQ_I2C1			(SPEAR3XX_VIRQ_START + 16)
 
 /* spear3xx shared irq */
 static struct shirq_dev_config shirq_ras1_config[] = {
@@ -508,17 +206,250 @@ static struct spear_shirq shirq_intrcomm_ras = {
 	},
 };
 
-/* Add spear320 specific devices here */
+/* DMAC platform data's slave info */
+struct pl08x_channel_data spear320_dma_info[] = {
+	{
+		.bus_id = "uart0_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart0_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp0_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp0_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "i2c0_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "i2c0_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "irda",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "adc",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "to_jpeg",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "from_jpeg",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp1_rx",
+		.min_signal = 0,
+		.max_signal = 0,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ssp1_tx",
+		.min_signal = 1,
+		.max_signal = 1,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ssp2_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ssp2_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart1_rx",
+		.min_signal = 4,
+		.max_signal = 4,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart1_tx",
+		.min_signal = 5,
+		.max_signal = 5,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart2_rx",
+		.min_signal = 6,
+		.max_signal = 6,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart2_tx",
+		.min_signal = 7,
+		.max_signal = 7,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2c1_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2c1_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2c2_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2c2_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2s_rx",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2s_tx",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "rs485_rx",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "rs485_tx",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	},
+};
+
+static struct pl022_ssp_controller spear320_ssp_data[] = {
+	{
+		.bus_id = 1,
+		.enable_dma = 1,
+		.dma_filter = pl08x_filter_id,
+		.dma_tx_param = "ssp1_tx",
+		.dma_rx_param = "ssp1_rx",
+		.num_chipselect = 2,
+	}, {
+		.bus_id = 2,
+		.enable_dma = 1,
+		.dma_filter = pl08x_filter_id,
+		.dma_tx_param = "ssp2_tx",
+		.dma_rx_param = "ssp2_rx",
+		.num_chipselect = 2,
+	}
+};
+
+static struct amba_pl011_data spear320_uart_data[] = {
+	{
+		.dma_filter = pl08x_filter_id,
+		.dma_tx_param = "uart1_tx",
+		.dma_rx_param = "uart1_rx",
+	}, {
+		.dma_filter = pl08x_filter_id,
+		.dma_tx_param = "uart2_tx",
+		.dma_rx_param = "uart2_rx",
+	},
+};
 
-/* spear320 routines */
-void __init spear320_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
-		u8 pmx_dev_count)
+/* Add SPEAr310 auxdata to pass platform data */
+static struct of_dev_auxdata spear320_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL,
+			&pl022_plat_data),
+	OF_DEV_AUXDATA("arm,pl080", SPEAR3XX_ICM3_DMA_BASE, NULL,
+			&pl080_plat_data),
+	OF_DEV_AUXDATA("arm,pl022", SPEAR320_SSP0_BASE, NULL,
+			&spear320_ssp_data[0]),
+	OF_DEV_AUXDATA("arm,pl022", SPEAR320_SSP1_BASE, NULL,
+			&spear320_ssp_data[1]),
+	OF_DEV_AUXDATA("arm,pl011", SPEAR320_UART1_BASE, NULL,
+			&spear320_uart_data[0]),
+	OF_DEV_AUXDATA("arm,pl011", SPEAR320_UART2_BASE, NULL,
+			&spear320_uart_data[1]),
+	{}
+};
+
+static void __init spear320_dt_init(void)
 {
 	void __iomem *base;
-	int ret = 0;
+	int ret;
 
-	/* call spear3xx family common init function */
-	spear3xx_init();
+	pl080_plat_data.slave_channels = spear320_dma_info;
+	pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear320_dma_info);
+
+	of_platform_populate(NULL, of_default_bus_match_table,
+			spear320_auxdata_lookup, NULL);
 
 	/* shared irq registration */
 	base = ioremap(SPEAR320_SOC_CONFIG_BASE, SZ_4K);
@@ -527,29 +458,49 @@ void __init spear320_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
 		shirq_ras1.regs.base = base;
 		ret = spear_shirq_register(&shirq_ras1);
 		if (ret)
-			printk(KERN_ERR "Error registering Shared IRQ 1\n");
+			pr_err("Error registering Shared IRQ 1\n");
 
 		/* shirq 3 */
 		shirq_ras3.regs.base = base;
 		ret = spear_shirq_register(&shirq_ras3);
 		if (ret)
-			printk(KERN_ERR "Error registering Shared IRQ 3\n");
+			pr_err("Error registering Shared IRQ 3\n");
 
 		/* shirq 4 */
 		shirq_intrcomm_ras.regs.base = base;
 		ret = spear_shirq_register(&shirq_intrcomm_ras);
 		if (ret)
-			printk(KERN_ERR "Error registering Shared IRQ 4\n");
+			pr_err("Error registering Shared IRQ 4\n");
 	}
+}
+
+static const char * const spear320_dt_board_compat[] = {
+	"st,spear320",
+	"st,spear320-evb",
+	NULL,
+};
 
-	/* pmx initialization */
-	pmx_driver.base = base;
-	pmx_driver.mode = pmx_mode;
-	pmx_driver.devs = pmx_devs;
-	pmx_driver.devs_count = pmx_dev_count;
+struct map_desc spear320_io_desc[] __initdata = {
+	{
+		.virtual	= VA_SPEAR320_SOC_CONFIG_BASE,
+		.pfn		= __phys_to_pfn(SPEAR320_SOC_CONFIG_BASE),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	},
+};
 
-	ret = pmx_register(&pmx_driver);
-	if (ret)
-		printk(KERN_ERR "padmux: registration failed. err no: %d\n",
-				ret);
+static void __init spear320_map_io(void)
+{
+	iotable_init(spear320_io_desc, ARRAY_SIZE(spear320_io_desc));
+	spear3xx_map_io();
 }
+
+DT_MACHINE_START(SPEAR320_DT, "ST SPEAr320 SoC with Flattened Device Tree")
+	.map_io		=	spear320_map_io,
+	.init_irq	=	spear3xx_dt_init_irq,
+	.handle_irq	=	vic_handle_irq,
+	.timer		=	&spear3xx_timer,
+	.init_machine	=	spear320_dt_init,
+	.restart	=	spear_restart,
+	.dt_compat	=	spear320_dt_board_compat,
+MACHINE_END

arch/arm/mach-spear3xx/spear320_evb.c

@@ -1,79 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/spear320_evb.c
- *
- * SPEAr320 evaluation board source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/hardware/vic.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-#include <mach/generic.h>
-#include <mach/hardware.h>
-
-/* padmux devices to enable */
-static struct pmx_dev *pmx_devs[] = {
-	/* spear3xx specific devices */
-	&spear3xx_pmx_i2c,
-	&spear3xx_pmx_ssp,
-	&spear3xx_pmx_mii,
-	&spear3xx_pmx_uart0,
-
-	/* spear320 specific devices */
-	&spear320_pmx_fsmc,
-	&spear320_pmx_sdhci,
-	&spear320_pmx_i2s,
-	&spear320_pmx_uart1,
-	&spear320_pmx_uart2,
-	&spear320_pmx_can,
-	&spear320_pmx_pwm0,
-	&spear320_pmx_pwm1,
-	&spear320_pmx_pwm2,
-	&spear320_pmx_mii1,
-};
-
-static struct amba_device *amba_devs[] __initdata = {
-	/* spear3xx specific devices */
-	&spear3xx_gpio_device,
-	&spear3xx_uart_device,
-
-	/* spear320 specific devices */
-};
-
-static struct platform_device *plat_devs[] __initdata = {
-	/* spear3xx specific devices */
-
-	/* spear320 specific devices */
-};
-
-static void __init spear320_evb_init(void)
-{
-	unsigned int i;
-
-	/* call spear320 machine init function */
-	spear320_init(&spear320_auto_net_mii_mode, pmx_devs,
-			ARRAY_SIZE(pmx_devs));
-
-	/* Add Platform Devices */
-	platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
-
-	/* Add Amba Devices */
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
-		amba_device_register(amba_devs[i], &iomem_resource);
-}
-
-MACHINE_START(SPEAR320, "ST-SPEAR320-EVB")
-	.atag_offset	=	0x100,
-	.map_io		=	spear3xx_map_io,
-	.init_irq	=	spear3xx_init_irq,
-	.handle_irq	=	vic_handle_irq,
-	.timer		=	&spear3xx_timer,
-	.init_machine	=	spear320_evb_init,
-	.restart	=	spear_restart,
-MACHINE_END

arch/arm/mach-spear3xx/spear3xx.c

@@ -3,71 +3,78 @@
  *
  * SPEAr3XX machines common source file
  *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Copyright (C) 2009-2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
 
-#include <linux/types.h>
-#include <linux/amba/pl061.h>
-#include <linux/ptrace.h>
+#define pr_fmt(fmt) "SPEAr3xx: " fmt
+
+#include <linux/amba/pl022.h>
+#include <linux/amba/pl08x.h>
+#include <linux/of_irq.h>
 #include <linux/io.h>
+#include <asm/hardware/pl080.h>
 #include <asm/hardware/vic.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
+#include <plat/pl080.h>
 #include <mach/generic.h>
-#include <mach/hardware.h>
-
-/* Add spear3xx machines common devices here */
-/* gpio device registration */
-static struct pl061_platform_data gpio_plat_data = {
-	.gpio_base	= 0,
-	.irq_base	= SPEAR3XX_GPIO_INT_BASE,
+#include <mach/spear.h>
+
+/* ssp device registration */
+struct pl022_ssp_controller pl022_plat_data = {
+	.bus_id = 0,
+	.enable_dma = 1,
+	.dma_filter = pl08x_filter_id,
+	.dma_tx_param = "ssp0_tx",
+	.dma_rx_param = "ssp0_rx",
+	/*
+	 * This is number of spi devices that can be connected to spi. There are
+	 * two type of chipselects on which slave devices can work. One is chip
+	 * select provided by spi masters other is controlled through external
+	 * gpio's. We can't use chipselect provided from spi master (because as
+	 * soon as FIFO becomes empty, CS is disabled and transfer ends). So
+	 * this number now depends on number of gpios available for spi. each
+	 * slave on each master requires a separate gpio pin.
+	 */
+	.num_chipselect = 2,
+};
+
+/* dmac device registration */
+struct pl08x_platform_data pl080_plat_data = {
+	.memcpy_channel = {
+		.bus_id = "memcpy",
+		.cctl = (PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \
+			PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT | \
+			PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | \
+			PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | \
+			PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE | \
+			PL080_CONTROL_PROT_SYS),
+	},
+	.lli_buses = PL08X_AHB1,
+	.mem_buses = PL08X_AHB1,
+	.get_signal = pl080_get_signal,
+	.put_signal = pl080_put_signal,
 };
 
-AMBA_APB_DEVICE(spear3xx_gpio, "gpio", 0, SPEAR3XX_ICM3_GPIO_BASE,
-	{SPEAR3XX_IRQ_BASIC_GPIO}, &gpio_plat_data);
-
-/* uart device registration */
-AMBA_APB_DEVICE(spear3xx_uart, "uart", 0, SPEAR3XX_ICM1_UART_BASE,
-	{SPEAR3XX_IRQ_UART}, NULL);
-
-/* Do spear3xx familiy common initialization part here */
-void __init spear3xx_init(void)
-{
-	/* nothing to do for now */
-}
-
-/* This will initialize vic */
-void __init spear3xx_init_irq(void)
-{
-	vic_init((void __iomem *)VA_SPEAR3XX_ML1_VIC_BASE, 0, ~0, 0);
-}
-
-/* Following will create static virtual/physical mappings */
+/*
+ * Following will create 16MB static virtual/physical mappings
+ * PHYSICAL		VIRTUAL
+ * 0xD0000000		0xFD000000
+ * 0xFC000000		0xFC000000
+ */
 struct map_desc spear3xx_io_desc[] __initdata = {
 	{
-		.virtual	= VA_SPEAR3XX_ICM1_UART_BASE,
-		.pfn		= __phys_to_pfn(SPEAR3XX_ICM1_UART_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= VA_SPEAR3XX_ML1_VIC_BASE,
-		.pfn		= __phys_to_pfn(SPEAR3XX_ML1_VIC_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= VA_SPEAR3XX_ICM3_SYS_CTRL_BASE,
-		.pfn		= __phys_to_pfn(SPEAR3XX_ICM3_SYS_CTRL_BASE),
-		.length		= SZ_4K,
+		.virtual	= VA_SPEAR3XX_ICM1_2_BASE,
+		.pfn		= __phys_to_pfn(SPEAR3XX_ICM1_2_BASE),
+		.length		= SZ_16M,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	= VA_SPEAR3XX_ICM3_MISC_REG_BASE,
-		.pfn		= __phys_to_pfn(SPEAR3XX_ICM3_MISC_REG_BASE),
-		.length		= SZ_4K,
+		.virtual	= VA_SPEAR3XX_ICM3_SMI_CTRL_BASE,
+		.pfn		= __phys_to_pfn(SPEAR3XX_ICM3_SMI_CTRL_BASE),
+		.length		= SZ_16M,
 		.type		= MT_DEVICE
 	},
 };
@@ -76,441 +83,15 @@ struct map_desc spear3xx_io_desc[] __initdata = {
 void __init spear3xx_map_io(void)
 {
 	iotable_init(spear3xx_io_desc, ARRAY_SIZE(spear3xx_io_desc));
-
-	/* This will initialize clock framework */
-	spear3xx_clk_init();
 }
 
-/* pad multiplexing support */
-/* devices */
-static struct pmx_dev_mode pmx_firda_modes[] = {
-	{
-		.ids = 0xffffffff,
-		.mask = PMX_FIRDA_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_firda = {
-	.name = "firda",
-	.modes = pmx_firda_modes,
-	.mode_count = ARRAY_SIZE(pmx_firda_modes),
-	.enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_i2c_modes[] = {
-	{
-		.ids = 0xffffffff,
-		.mask = PMX_I2C_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_i2c = {
-	.name = "i2c",
-	.modes = pmx_i2c_modes,
-	.mode_count = ARRAY_SIZE(pmx_i2c_modes),
-	.enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_ssp_cs_modes[] = {
-	{
-		.ids = 0xffffffff,
-		.mask = PMX_SSP_CS_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_ssp_cs = {
-	.name = "ssp_chip_selects",
-	.modes = pmx_ssp_cs_modes,
-	.mode_count = ARRAY_SIZE(pmx_ssp_cs_modes),
-	.enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_ssp_modes[] = {
-	{
-		.ids = 0xffffffff,
-		.mask = PMX_SSP_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_ssp = {
-	.name = "ssp",
-	.modes = pmx_ssp_modes,
-	.mode_count = ARRAY_SIZE(pmx_ssp_modes),
-	.enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_mii_modes[] = {
-	{
-		.ids = 0xffffffff,
-		.mask = PMX_MII_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_mii = {
-	.name = "mii",
-	.modes = pmx_mii_modes,
-	.mode_count = ARRAY_SIZE(pmx_mii_modes),
-	.enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_gpio_pin0_modes[] = {
-	{
-		.ids = 0xffffffff,
-		.mask = PMX_GPIO_PIN0_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_gpio_pin0 = {
-	.name = "gpio_pin0",
-	.modes = pmx_gpio_pin0_modes,
-	.mode_count = ARRAY_SIZE(pmx_gpio_pin0_modes),
-	.enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_gpio_pin1_modes[] = {
-	{
-		.ids = 0xffffffff,
-		.mask = PMX_GPIO_PIN1_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_gpio_pin1 = {
-	.name = "gpio_pin1",
-	.modes = pmx_gpio_pin1_modes,
-	.mode_count = ARRAY_SIZE(pmx_gpio_pin1_modes),
-	.enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_gpio_pin2_modes[] = {
-	{
-		.ids = 0xffffffff,
-		.mask = PMX_GPIO_PIN2_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_gpio_pin2 = {
-	.name = "gpio_pin2",
-	.modes = pmx_gpio_pin2_modes,
-	.mode_count = ARRAY_SIZE(pmx_gpio_pin2_modes),
-	.enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_gpio_pin3_modes[] = {
-	{
-		.ids = 0xffffffff,
-		.mask = PMX_GPIO_PIN3_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_gpio_pin3 = {
-	.name = "gpio_pin3",
-	.modes = pmx_gpio_pin3_modes,
-	.mode_count = ARRAY_SIZE(pmx_gpio_pin3_modes),
-	.enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_gpio_pin4_modes[] = {
-	{
-		.ids = 0xffffffff,
-		.mask = PMX_GPIO_PIN4_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_gpio_pin4 = {
-	.name = "gpio_pin4",
-	.modes = pmx_gpio_pin4_modes,
-	.mode_count = ARRAY_SIZE(pmx_gpio_pin4_modes),
-	.enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_gpio_pin5_modes[] = {
-	{
-		.ids = 0xffffffff,
-		.mask = PMX_GPIO_PIN5_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_gpio_pin5 = {
-	.name = "gpio_pin5",
-	.modes = pmx_gpio_pin5_modes,
-	.mode_count = ARRAY_SIZE(pmx_gpio_pin5_modes),
-	.enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_uart0_modem_modes[] = {
-	{
-		.ids = 0xffffffff,
-		.mask = PMX_UART0_MODEM_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_uart0_modem = {
-	.name = "uart0_modem",
-	.modes = pmx_uart0_modem_modes,
-	.mode_count = ARRAY_SIZE(pmx_uart0_modem_modes),
-	.enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_uart0_modes[] = {
-	{
-		.ids = 0xffffffff,
-		.mask = PMX_UART0_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_uart0 = {
-	.name = "uart0",
-	.modes = pmx_uart0_modes,
-	.mode_count = ARRAY_SIZE(pmx_uart0_modes),
-	.enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_timer_3_4_modes[] = {
-	{
-		.ids = 0xffffffff,
-		.mask = PMX_TIMER_3_4_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_timer_3_4 = {
-	.name = "timer_3_4",
-	.modes = pmx_timer_3_4_modes,
-	.mode_count = ARRAY_SIZE(pmx_timer_3_4_modes),
-	.enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_timer_1_2_modes[] = {
-	{
-		.ids = 0xffffffff,
-		.mask = PMX_TIMER_1_2_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_timer_1_2 = {
-	.name = "timer_1_2",
-	.modes = pmx_timer_1_2_modes,
-	.mode_count = ARRAY_SIZE(pmx_timer_1_2_modes),
-	.enb_on_reset = 0,
-};
-
-#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
-/* plgpios devices */
-static struct pmx_dev_mode pmx_plgpio_0_1_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_FIRDA_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_0_1 = {
-	.name = "plgpio 0 and 1",
-	.modes = pmx_plgpio_0_1_modes,
-	.mode_count = ARRAY_SIZE(pmx_plgpio_0_1_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_2_3_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_UART0_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_2_3 = {
-	.name = "plgpio 2 and 3",
-	.modes = pmx_plgpio_2_3_modes,
-	.mode_count = ARRAY_SIZE(pmx_plgpio_2_3_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_4_5_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_I2C_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_4_5 = {
-	.name = "plgpio 4 and 5",
-	.modes = pmx_plgpio_4_5_modes,
-	.mode_count = ARRAY_SIZE(pmx_plgpio_4_5_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_6_9_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_SSP_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_6_9 = {
-	.name = "plgpio 6 to 9",
-	.modes = pmx_plgpio_6_9_modes,
-	.mode_count = ARRAY_SIZE(pmx_plgpio_6_9_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_10_27_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_MII_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_10_27 = {
-	.name = "plgpio 10 to 27",
-	.modes = pmx_plgpio_10_27_modes,
-	.mode_count = ARRAY_SIZE(pmx_plgpio_10_27_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_28_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_GPIO_PIN0_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_28 = {
-	.name = "plgpio 28",
-	.modes = pmx_plgpio_28_modes,
-	.mode_count = ARRAY_SIZE(pmx_plgpio_28_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_29_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_GPIO_PIN1_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_29 = {
-	.name = "plgpio 29",
-	.modes = pmx_plgpio_29_modes,
-	.mode_count = ARRAY_SIZE(pmx_plgpio_29_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_30_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_GPIO_PIN2_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_30 = {
-	.name = "plgpio 30",
-	.modes = pmx_plgpio_30_modes,
-	.mode_count = ARRAY_SIZE(pmx_plgpio_30_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_31_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_GPIO_PIN3_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_31 = {
-	.name = "plgpio 31",
-	.modes = pmx_plgpio_31_modes,
-	.mode_count = ARRAY_SIZE(pmx_plgpio_31_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_32_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_GPIO_PIN4_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_32 = {
-	.name = "plgpio 32",
-	.modes = pmx_plgpio_32_modes,
-	.mode_count = ARRAY_SIZE(pmx_plgpio_32_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_33_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_GPIO_PIN5_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_33 = {
-	.name = "plgpio 33",
-	.modes = pmx_plgpio_33_modes,
-	.mode_count = ARRAY_SIZE(pmx_plgpio_33_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_34_36_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_SSP_CS_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_34_36 = {
-	.name = "plgpio 34 to 36",
-	.modes = pmx_plgpio_34_36_modes,
-	.mode_count = ARRAY_SIZE(pmx_plgpio_34_36_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_37_42_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_UART0_MODEM_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_37_42 = {
-	.name = "plgpio 37 to 42",
-	.modes = pmx_plgpio_37_42_modes,
-	.mode_count = ARRAY_SIZE(pmx_plgpio_37_42_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_43_44_47_48_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_TIMER_1_2_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_43_44_47_48 = {
-	.name = "plgpio 43, 44, 47 and 48",
-	.modes = pmx_plgpio_43_44_47_48_modes,
-	.mode_count = ARRAY_SIZE(pmx_plgpio_43_44_47_48_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_45_46_49_50_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_TIMER_3_4_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_45_46_49_50 = {
-	.name = "plgpio 45, 46, 49 and 50",
-	.modes = pmx_plgpio_45_46_49_50_modes,
-	.mode_count = ARRAY_SIZE(pmx_plgpio_45_46_49_50_modes),
-	.enb_on_reset = 1,
-};
-#endif /* CONFIG_MACH_SPEAR310 || CONFIG_MACH_SPEAR320 */
-
 static void __init spear3xx_timer_init(void)
 {
 	char pclk_name[] = "pll3_48m_clk";
 	struct clk *gpt_clk, *pclk;
 
+	spear3xx_clk_init();
+
 	/* get the system timer clock */
 	gpt_clk = clk_get_sys("gpt0", NULL);
 	if (IS_ERR(gpt_clk)) {
@@ -530,9 +111,19 @@ static void __init spear3xx_timer_init(void)
 	clk_put(gpt_clk);
 	clk_put(pclk);
 
-	spear_setup_timer();
+	spear_setup_of_timer();
 }
 
 struct sys_timer spear3xx_timer = {
 	.init = spear3xx_timer_init,
 };
+
+static const struct of_device_id vic_of_match[] __initconst = {
+	{ .compatible = "arm,pl190-vic", .data = vic_of_init, },
+	{ /* Sentinel */ }
+};
+
+void __init spear3xx_dt_init_irq(void)
+{
+	of_irq_init(vic_of_match);
+}

arch/arm/mach-spear6xx/Makefile

@@ -3,4 +3,4 @@
 #
 
 # common files
-obj-y	+= clock.o spear6xx.o
+obj-y	+= spear6xx.o

arch/arm/mach-spear6xx/Makefile.boot

@@ -1,3 +1,5 @@
 zreladdr-y	+= 0x00008000
 params_phys-y	:= 0x00000100
 initrd_phys-y	:= 0x00800000
+
+dtb-$(CONFIG_BOARD_SPEAR600_DT)	+= spear600-evb.dtb

arch/arm/mach-spear6xx/clock.c

@@ -1,683 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/clock.c
- *
- * SPEAr6xx machines clock framework source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <plat/clock.h>
-#include <mach/misc_regs.h>
-
-/* root clks */
-/* 32 KHz oscillator clock */
-static struct clk osc_32k_clk = {
-	.flags = ALWAYS_ENABLED,
-	.rate = 32000,
-};
-
-/* 30 MHz oscillator clock */
-static struct clk osc_30m_clk = {
-	.flags = ALWAYS_ENABLED,
-	.rate = 30000000,
-};
-
-/* clock derived from 32 KHz osc clk */
-/* rtc clock */
-static struct clk rtc_clk = {
-	.pclk = &osc_32k_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = RTC_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* clock derived from 30 MHz osc clk */
-/* pll masks structure */
-static struct pll_clk_masks pll1_masks = {
-	.mode_mask = PLL_MODE_MASK,
-	.mode_shift = PLL_MODE_SHIFT,
-	.norm_fdbk_m_mask = PLL_NORM_FDBK_M_MASK,
-	.norm_fdbk_m_shift = PLL_NORM_FDBK_M_SHIFT,
-	.dith_fdbk_m_mask = PLL_DITH_FDBK_M_MASK,
-	.dith_fdbk_m_shift = PLL_DITH_FDBK_M_SHIFT,
-	.div_p_mask = PLL_DIV_P_MASK,
-	.div_p_shift = PLL_DIV_P_SHIFT,
-	.div_n_mask = PLL_DIV_N_MASK,
-	.div_n_shift = PLL_DIV_N_SHIFT,
-};
-
-/* pll1 configuration structure */
-static struct pll_clk_config pll1_config = {
-	.mode_reg = PLL1_CTR,
-	.cfg_reg = PLL1_FRQ,
-	.masks = &pll1_masks,
-};
-
-/* pll rate configuration table, in ascending order of rates */
-struct pll_rate_tbl pll_rtbl[] = {
-	{.mode = 0, .m = 0x85, .n = 0x0C, .p = 0x1}, /* 266 MHz */
-	{.mode = 0, .m = 0xA6, .n = 0x0C, .p = 0x1}, /* 332 MHz */
-};
-
-/* PLL1 clock */
-static struct clk pll1_clk = {
-	.flags = ENABLED_ON_INIT,
-	.pclk = &osc_30m_clk,
-	.en_reg = PLL1_CTR,
-	.en_reg_bit = PLL_ENABLE,
-	.calc_rate = &pll_calc_rate,
-	.recalc = &pll_clk_recalc,
-	.set_rate = &pll_clk_set_rate,
-	.rate_config = {pll_rtbl, ARRAY_SIZE(pll_rtbl), 1},
-	.private_data = &pll1_config,
-};
-
-/* PLL3 48 MHz clock */
-static struct clk pll3_48m_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &osc_30m_clk,
-	.rate = 48000000,
-};
-
-/* watch dog timer clock */
-static struct clk wdt_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &osc_30m_clk,
-	.recalc = &follow_parent,
-};
-
-/* clock derived from pll1 clk */
-/* cpu clock */
-static struct clk cpu_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll1_clk,
-	.recalc = &follow_parent,
-};
-
-/* ahb masks structure */
-static struct bus_clk_masks ahb_masks = {
-	.mask = PLL_HCLK_RATIO_MASK,
-	.shift = PLL_HCLK_RATIO_SHIFT,
-};
-
-/* ahb configuration structure */
-static struct bus_clk_config ahb_config = {
-	.reg = CORE_CLK_CFG,
-	.masks = &ahb_masks,
-};
-
-/* ahb rate configuration table, in ascending order of rates */
-struct bus_rate_tbl bus_rtbl[] = {
-	{.div = 3}, /* == parent divided by 4 */
-	{.div = 2}, /* == parent divided by 3 */
-	{.div = 1}, /* == parent divided by 2 */
-	{.div = 0}, /* == parent divided by 1 */
-};
-
-/* ahb clock */
-static struct clk ahb_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll1_clk,
-	.calc_rate = &bus_calc_rate,
-	.recalc = &bus_clk_recalc,
-	.set_rate = &bus_clk_set_rate,
-	.rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
-	.private_data = &ahb_config,
-};
-
-/* auxiliary synthesizers masks */
-static struct aux_clk_masks aux_masks = {
-	.eq_sel_mask = AUX_EQ_SEL_MASK,
-	.eq_sel_shift = AUX_EQ_SEL_SHIFT,
-	.eq1_mask = AUX_EQ1_SEL,
-	.eq2_mask = AUX_EQ2_SEL,
-	.xscale_sel_mask = AUX_XSCALE_MASK,
-	.xscale_sel_shift = AUX_XSCALE_SHIFT,
-	.yscale_sel_mask = AUX_YSCALE_MASK,
-	.yscale_sel_shift = AUX_YSCALE_SHIFT,
-};
-
-/* uart configurations */
-static struct aux_clk_config uart_synth_config = {
-	.synth_reg = UART_CLK_SYNT,
-	.masks = &aux_masks,
-};
-
-/* aux rate configuration table, in ascending order of rates */
-struct aux_rate_tbl aux_rtbl[] = {
-	/* For PLL1 = 332 MHz */
-	{.xscale = 1, .yscale = 8, .eq = 1}, /* 41.5 MHz */
-	{.xscale = 1, .yscale = 4, .eq = 1}, /* 83 MHz */
-	{.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */
-};
-
-/* uart synth clock */
-static struct clk uart_synth_clk = {
-	.en_reg = UART_CLK_SYNT,
-	.en_reg_bit = AUX_SYNT_ENB,
-	.pclk = &pll1_clk,
-	.calc_rate = &aux_calc_rate,
-	.recalc = &aux_clk_recalc,
-	.set_rate = &aux_clk_set_rate,
-	.rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2},
-	.private_data = &uart_synth_config,
-};
-
-/* uart parents */
-static struct pclk_info uart_pclk_info[] = {
-	{
-		.pclk = &uart_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* uart parent select structure */
-static struct pclk_sel uart_pclk_sel = {
-	.pclk_info = uart_pclk_info,
-	.pclk_count = ARRAY_SIZE(uart_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = UART_CLK_MASK,
-};
-
-/* uart0 clock */
-static struct clk uart0_clk = {
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = UART0_CLK_ENB,
-	.pclk_sel = &uart_pclk_sel,
-	.pclk_sel_shift = UART_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* uart1 clock */
-static struct clk uart1_clk = {
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = UART1_CLK_ENB,
-	.pclk_sel = &uart_pclk_sel,
-	.pclk_sel_shift = UART_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* firda configurations */
-static struct aux_clk_config firda_synth_config = {
-	.synth_reg = FIRDA_CLK_SYNT,
-	.masks = &aux_masks,
-};
-
-/* firda synth clock */
-static struct clk firda_synth_clk = {
-	.en_reg = FIRDA_CLK_SYNT,
-	.en_reg_bit = AUX_SYNT_ENB,
-	.pclk = &pll1_clk,
-	.calc_rate = &aux_calc_rate,
-	.recalc = &aux_clk_recalc,
-	.set_rate = &aux_clk_set_rate,
-	.rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2},
-	.private_data = &firda_synth_config,
-};
-
-/* firda parents */
-static struct pclk_info firda_pclk_info[] = {
-	{
-		.pclk = &firda_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* firda parent select structure */
-static struct pclk_sel firda_pclk_sel = {
-	.pclk_info = firda_pclk_info,
-	.pclk_count = ARRAY_SIZE(firda_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = FIRDA_CLK_MASK,
-};
-
-/* firda clock */
-static struct clk firda_clk = {
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = FIRDA_CLK_ENB,
-	.pclk_sel = &firda_pclk_sel,
-	.pclk_sel_shift = FIRDA_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* clcd configurations */
-static struct aux_clk_config clcd_synth_config = {
-	.synth_reg = CLCD_CLK_SYNT,
-	.masks = &aux_masks,
-};
-
-/* firda synth clock */
-static struct clk clcd_synth_clk = {
-	.en_reg = CLCD_CLK_SYNT,
-	.en_reg_bit = AUX_SYNT_ENB,
-	.pclk = &pll1_clk,
-	.calc_rate = &aux_calc_rate,
-	.recalc = &aux_clk_recalc,
-	.set_rate = &aux_clk_set_rate,
-	.rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2},
-	.private_data = &clcd_synth_config,
-};
-
-/* clcd parents */
-static struct pclk_info clcd_pclk_info[] = {
-	{
-		.pclk = &clcd_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* clcd parent select structure */
-static struct pclk_sel clcd_pclk_sel = {
-	.pclk_info = clcd_pclk_info,
-	.pclk_count = ARRAY_SIZE(clcd_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = CLCD_CLK_MASK,
-};
-
-/* clcd clock */
-static struct clk clcd_clk = {
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = CLCD_CLK_ENB,
-	.pclk_sel = &clcd_pclk_sel,
-	.pclk_sel_shift = CLCD_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* gpt synthesizer masks */
-static struct gpt_clk_masks gpt_masks = {
-	.mscale_sel_mask = GPT_MSCALE_MASK,
-	.mscale_sel_shift = GPT_MSCALE_SHIFT,
-	.nscale_sel_mask = GPT_NSCALE_MASK,
-	.nscale_sel_shift = GPT_NSCALE_SHIFT,
-};
-
-/* gpt rate configuration table, in ascending order of rates */
-struct gpt_rate_tbl gpt_rtbl[] = {
-	/* For pll1 = 332 MHz */
-	{.mscale = 4, .nscale = 0}, /* 41.5 MHz */
-	{.mscale = 2, .nscale = 0}, /* 55.3 MHz */
-	{.mscale = 1, .nscale = 0}, /* 83 MHz */
-};
-
-/* gpt0 synth clk config*/
-static struct gpt_clk_config gpt0_synth_config = {
-	.synth_reg = PRSC1_CLK_CFG,
-	.masks = &gpt_masks,
-};
-
-/* gpt synth clock */
-static struct clk gpt0_synth_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll1_clk,
-	.calc_rate = &gpt_calc_rate,
-	.recalc = &gpt_clk_recalc,
-	.set_rate = &gpt_clk_set_rate,
-	.rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
-	.private_data = &gpt0_synth_config,
-};
-
-/* gpt parents */
-static struct pclk_info gpt0_pclk_info[] = {
-	{
-		.pclk = &gpt0_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* gpt parent select structure */
-static struct pclk_sel gpt0_pclk_sel = {
-	.pclk_info = gpt0_pclk_info,
-	.pclk_count = ARRAY_SIZE(gpt0_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt0 ARM1 subsystem timer clock */
-static struct clk gpt0_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk_sel = &gpt0_pclk_sel,
-	.pclk_sel_shift = GPT0_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-
-/* Note: gpt0 and gpt1 share same parent clocks */
-/* gpt parent select structure */
-static struct pclk_sel gpt1_pclk_sel = {
-	.pclk_info = gpt0_pclk_info,
-	.pclk_count = ARRAY_SIZE(gpt0_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt1 timer clock */
-static struct clk gpt1_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk_sel = &gpt1_pclk_sel,
-	.pclk_sel_shift = GPT1_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* gpt2 synth clk config*/
-static struct gpt_clk_config gpt2_synth_config = {
-	.synth_reg = PRSC2_CLK_CFG,
-	.masks = &gpt_masks,
-};
-
-/* gpt synth clock */
-static struct clk gpt2_synth_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll1_clk,
-	.calc_rate = &gpt_calc_rate,
-	.recalc = &gpt_clk_recalc,
-	.set_rate = &gpt_clk_set_rate,
-	.rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
-	.private_data = &gpt2_synth_config,
-};
-
-/* gpt parents */
-static struct pclk_info gpt2_pclk_info[] = {
-	{
-		.pclk = &gpt2_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* gpt parent select structure */
-static struct pclk_sel gpt2_pclk_sel = {
-	.pclk_info = gpt2_pclk_info,
-	.pclk_count = ARRAY_SIZE(gpt2_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt2 timer clock */
-static struct clk gpt2_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk_sel = &gpt2_pclk_sel,
-	.pclk_sel_shift = GPT2_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* gpt3 synth clk config*/
-static struct gpt_clk_config gpt3_synth_config = {
-	.synth_reg = PRSC3_CLK_CFG,
-	.masks = &gpt_masks,
-};
-
-/* gpt synth clock */
-static struct clk gpt3_synth_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll1_clk,
-	.calc_rate = &gpt_calc_rate,
-	.recalc = &gpt_clk_recalc,
-	.set_rate = &gpt_clk_set_rate,
-	.rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
-	.private_data = &gpt3_synth_config,
-};
-
-/* gpt parents */
-static struct pclk_info gpt3_pclk_info[] = {
-	{
-		.pclk = &gpt3_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* gpt parent select structure */
-static struct pclk_sel gpt3_pclk_sel = {
-	.pclk_info = gpt3_pclk_info,
-	.pclk_count = ARRAY_SIZE(gpt3_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt3 timer clock */
-static struct clk gpt3_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk_sel = &gpt3_pclk_sel,
-	.pclk_sel_shift = GPT3_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* clock derived from pll3 clk */
-/* usbh0 clock */
-static struct clk usbh0_clk = {
-	.pclk = &pll3_48m_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = USBH0_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* usbh1 clock */
-static struct clk usbh1_clk = {
-	.pclk = &pll3_48m_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = USBH1_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* usbd clock */
-static struct clk usbd_clk = {
-	.pclk = &pll3_48m_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = USBD_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* clock derived from ahb clk */
-/* apb masks structure */
-static struct bus_clk_masks apb_masks = {
-	.mask = HCLK_PCLK_RATIO_MASK,
-	.shift = HCLK_PCLK_RATIO_SHIFT,
-};
-
-/* apb configuration structure */
-static struct bus_clk_config apb_config = {
-	.reg = CORE_CLK_CFG,
-	.masks = &apb_masks,
-};
-
-/* apb clock */
-static struct clk apb_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &ahb_clk,
-	.calc_rate = &bus_calc_rate,
-	.recalc = &bus_clk_recalc,
-	.set_rate = &bus_clk_set_rate,
-	.rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
-	.private_data = &apb_config,
-};
-
-/* i2c clock */
-static struct clk i2c_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = I2C_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* dma clock */
-static struct clk dma_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = DMA_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* jpeg clock */
-static struct clk jpeg_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = JPEG_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* gmac clock */
-static struct clk gmac_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = GMAC_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* smi clock */
-static struct clk smi_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = SMI_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* fsmc clock */
-static struct clk fsmc_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = FSMC_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* clock derived from apb clk */
-/* adc clock */
-static struct clk adc_clk = {
-	.pclk = &apb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = ADC_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* ssp0 clock */
-static struct clk ssp0_clk = {
-	.pclk = &apb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = SSP0_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* ssp1 clock */
-static struct clk ssp1_clk = {
-	.pclk = &apb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = SSP1_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* ssp2 clock */
-static struct clk ssp2_clk = {
-	.pclk = &apb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = SSP2_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* gpio0 ARM subsystem clock */
-static struct clk gpio0_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-
-/* gpio1 clock */
-static struct clk gpio1_clk = {
-	.pclk = &apb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = GPIO1_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* gpio2 clock */
-static struct clk gpio2_clk = {
-	.pclk = &apb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = GPIO2_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-static struct clk dummy_apb_pclk;
-
-/* array of all spear 6xx clock lookups */
-static struct clk_lookup spear_clk_lookups[] = {
-	{ .con_id = "apb_pclk",		.clk = &dummy_apb_pclk},
-	/* root clks */
-	{ .con_id = "osc_32k_clk",	.clk = &osc_32k_clk},
-	{ .con_id = "osc_30m_clk",	.clk = &osc_30m_clk},
-	/* clock derived from 32 KHz os		 clk */
-	{ .dev_id = "rtc-spear",	.clk = &rtc_clk},
-	/* clock derived from 30 MHz os		 clk */
-	{ .con_id = "pll1_clk",		.clk = &pll1_clk},
-	{ .con_id = "pll3_48m_clk",	.clk = &pll3_48m_clk},
-	{ .dev_id = "wdt",		.clk = &wdt_clk},
-	/* clock derived from pll1 clk */
-	{ .con_id = "cpu_clk",		.clk = &cpu_clk},
-	{ .con_id = "ahb_clk",		.clk = &ahb_clk},
-	{ .con_id = "uart_synth_clk",	.clk = &uart_synth_clk},
-	{ .con_id = "firda_synth_clk",	.clk = &firda_synth_clk},
-	{ .con_id = "clcd_synth_clk",	.clk = &clcd_synth_clk},
-	{ .con_id = "gpt0_synth_clk",	.clk = &gpt0_synth_clk},
-	{ .con_id = "gpt2_synth_clk",	.clk = &gpt2_synth_clk},
-	{ .con_id = "gpt3_synth_clk",	.clk = &gpt3_synth_clk},
-	{ .dev_id = "d0000000.serial",	.clk = &uart0_clk},
-	{ .dev_id = "d0080000.serial",	.clk = &uart1_clk},
-	{ .dev_id = "firda",		.clk = &firda_clk},
-	{ .dev_id = "clcd",		.clk = &clcd_clk},
-	{ .dev_id = "gpt0",		.clk = &gpt0_clk},
-	{ .dev_id = "gpt1",		.clk = &gpt1_clk},
-	{ .dev_id = "gpt2",		.clk = &gpt2_clk},
-	{ .dev_id = "gpt3",		.clk = &gpt3_clk},
-	/* clock derived from pll3 clk */
-	{ .dev_id = "designware_udc",	.clk = &usbd_clk},
-	{ .con_id = "usbh.0_clk",	.clk = &usbh0_clk},
-	{ .con_id = "usbh.1_clk",	.clk = &usbh1_clk},
-	/* clock derived from ahb clk */
-	{ .con_id = "apb_clk",		.clk = &apb_clk},
-	{ .dev_id = "d0200000.i2c",	.clk = &i2c_clk},
-	{ .dev_id = "dma",		.clk = &dma_clk},
-	{ .dev_id = "jpeg",		.clk = &jpeg_clk},
-	{ .dev_id = "gmac",		.clk = &gmac_clk},
-	{ .dev_id = "smi",		.clk = &smi_clk},
-	{ .dev_id = "fsmc-nand",	.clk = &fsmc_clk},
-	/* clock derived from apb clk */
-	{ .dev_id = "adc",		.clk = &adc_clk},
-	{ .dev_id = "ssp-pl022.0",	.clk = &ssp0_clk},
-	{ .dev_id = "ssp-pl022.1",	.clk = &ssp1_clk},
-	{ .dev_id = "ssp-pl022.2",	.clk = &ssp2_clk},
-	{ .dev_id = "f0100000.gpio",	.clk = &gpio0_clk},
-	{ .dev_id = "fc980000.gpio",	.clk = &gpio1_clk},
-	{ .dev_id = "d8100000.gpio",	.clk = &gpio2_clk},
-};
-
-void __init spear6xx_clk_init(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
-		clk_register(&spear_clk_lookups[i]);
-
-	clk_init();
-}

arch/arm/mach-spear6xx/include/mach/generic.h

@@ -15,34 +15,9 @@
 #define __MACH_GENERIC_H
 
 #include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/amba/bus.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-/*
- * Each GPT has 2 timer channels
- * Following GPT channels will be used as clock source and clockevent
- */
-#define SPEAR_GPT0_BASE		SPEAR6XX_CPU_TMR_BASE
-#define SPEAR_GPT0_CHAN0_IRQ	IRQ_CPU_GPT1_1
-#define SPEAR_GPT0_CHAN1_IRQ	IRQ_CPU_GPT1_2
-
-/* Add spear6xx family device structure declarations here */
-extern struct amba_device gpio_device[];
-extern struct amba_device uart_device[];
-extern struct sys_timer spear6xx_timer;
-
-/* Add spear6xx family function declarations here */
-void __init spear_setup_timer(void);
-void __init spear6xx_map_io(void);
-void __init spear6xx_init_irq(void);
-void __init spear6xx_init(void);
-void __init spear600_init(void);
-void __init spear6xx_clk_init(void);
 
+void __init spear_setup_of_timer(void);
 void spear_restart(char, const char *);
-
-/* Add spear600 machine device structure declarations here */
+void __init spear6xx_clk_init(void);
 
 #endif /* __MACH_GENERIC_H */

arch/arm/mach-spear6xx/include/mach/hardware.h

@@ -1,23 +1 @@
-/*
- * arch/arm/mach-spear6xx/include/mach/hardware.h
- *
- * Hardware definitions for SPEAr6xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Rajeev Kumar<rajeev-dlh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_HARDWARE_H
-#define __MACH_HARDWARE_H
-
-#include <plat/hardware.h>
-#include <mach/spear.h>
-
-/* Vitual to physical translation of statically mapped space */
-#define IO_ADDRESS(x)		(x | 0xF0000000)
-
-#endif /* __MACH_HARDWARE_H */
+/* empty */

arch/arm/mach-spear6xx/include/mach/irqs.h

@@ -16,82 +16,10 @@
 
 /* IRQ definitions */
 /* VIC 1 */
-#define IRQ_INTRCOMM_SW_IRQ			0
-#define IRQ_INTRCOMM_CPU_1			1
-#define IRQ_INTRCOMM_CPU_2			2
-#define IRQ_INTRCOMM_RAS2A11_1			3
-#define IRQ_INTRCOMM_RAS2A11_2			4
-#define IRQ_INTRCOMM_RAS2A12_1			5
-#define IRQ_INTRCOMM_RAS2A12_2			6
-#define IRQ_GEN_RAS_0				7
-#define IRQ_GEN_RAS_1				8
-#define IRQ_GEN_RAS_2				9
-#define IRQ_GEN_RAS_3				10
-#define IRQ_GEN_RAS_4				11
-#define IRQ_GEN_RAS_5				12
-#define IRQ_GEN_RAS_6				13
-#define IRQ_GEN_RAS_7				14
-#define IRQ_GEN_RAS_8				15
-#define IRQ_CPU_GPT1_1				16
-#define IRQ_CPU_GPT1_2				17
-#define IRQ_LOCAL_GPIO				18
-#define IRQ_PLL_UNLOCK				19
-#define IRQ_JPEG				20
-#define IRQ_FSMC				21
-#define IRQ_IRDA				22
-#define IRQ_RESERVED				23
-#define IRQ_UART_0				24
-#define IRQ_UART_1				25
-#define IRQ_SSP_1				26
-#define IRQ_SSP_2				27
-#define IRQ_I2C					28
-#define IRQ_GEN_RAS_9				29
-#define IRQ_GEN_RAS_10				30
-#define IRQ_GEN_RAS_11				31
-
-/* VIC 2 */
-#define IRQ_APPL_GPT1_1				32
-#define IRQ_APPL_GPT1_2				33
-#define IRQ_APPL_GPT2_1				34
-#define IRQ_APPL_GPT2_2				35
-#define IRQ_APPL_GPIO				36
-#define IRQ_APPL_SSP				37
-#define IRQ_APPL_ADC				38
-#define IRQ_APPL_RESERVED			39
-#define IRQ_AHB_EXP_MASTER			40
-#define IRQ_DDR_CONTROLLER			41
-#define IRQ_BASIC_DMA				42
-#define IRQ_BASIC_RESERVED1			43
-#define IRQ_BASIC_SMI				44
-#define IRQ_BASIC_CLCD				45
-#define IRQ_EXP_AHB_1				46
-#define IRQ_EXP_AHB_2				47
-#define IRQ_BASIC_GPT1_1			48
-#define IRQ_BASIC_GPT1_2			49
-#define IRQ_BASIC_RTC				50
-#define IRQ_BASIC_GPIO				51
-#define IRQ_BASIC_WDT				52
-#define IRQ_BASIC_RESERVED			53
-#define IRQ_AHB_EXP_SLAVE			54
-#define IRQ_GMAC_1				55
-#define IRQ_GMAC_2				56
-#define IRQ_USB_DEV				57
-#define IRQ_USB_H_OHCI_0			58
-#define IRQ_USB_H_EHCI_0			59
-#define IRQ_USB_H_OHCI_1			60
-#define IRQ_USB_H_EHCI_1			61
-#define IRQ_EXP_AHB_3				62
-#define IRQ_EXP_AHB_4				63
-
 #define IRQ_VIC_END				64
 
 /* GPIO pins virtual irqs */
-#define SPEAR_GPIO_INT_BASE	IRQ_VIC_END
-#define SPEAR_GPIO0_INT_BASE	SPEAR_GPIO_INT_BASE
-#define SPEAR_GPIO1_INT_BASE	(SPEAR_GPIO0_INT_BASE + 8)
-#define SPEAR_GPIO2_INT_BASE	(SPEAR_GPIO1_INT_BASE + 8)
-#define SPEAR_GPIO_INT_END	(SPEAR_GPIO2_INT_BASE + 8)
-#define VIRTUAL_IRQS		(SPEAR_GPIO_INT_END - IRQ_VIC_END)
-#define NR_IRQS			(IRQ_VIC_END + VIRTUAL_IRQS)
+#define VIRTUAL_IRQS				24
+#define NR_IRQS					(IRQ_VIC_END + VIRTUAL_IRQS)
 
 #endif	/* __MACH_IRQS_H */

arch/arm/mach-spear6xx/include/mach/misc_regs.h

@@ -14,161 +14,9 @@
 #ifndef __MACH_MISC_REGS_H
 #define __MACH_MISC_REGS_H
 
-#include <mach/hardware.h>
+#include <mach/spear.h>
 
 #define MISC_BASE		IOMEM(VA_SPEAR6XX_ICM3_MISC_REG_BASE)
-
-#define SOC_CFG_CTR		(MISC_BASE + 0x000)
-#define DIAG_CFG_CTR		(MISC_BASE + 0x004)
-#define PLL1_CTR		(MISC_BASE + 0x008)
-#define PLL1_FRQ		(MISC_BASE + 0x00C)
-#define PLL1_MOD		(MISC_BASE + 0x010)
-#define PLL2_CTR		(MISC_BASE + 0x014)
-/* PLL_CTR register masks */
-#define PLL_ENABLE		2
-#define PLL_MODE_SHIFT		4
-#define PLL_MODE_MASK		0x3
-#define PLL_MODE_NORMAL		0
-#define PLL_MODE_FRACTION	1
-#define PLL_MODE_DITH_DSB	2
-#define PLL_MODE_DITH_SSB	3
-
-#define PLL2_FRQ		(MISC_BASE + 0x018)
-/* PLL FRQ register masks */
-#define PLL_DIV_N_SHIFT		0
-#define PLL_DIV_N_MASK		0xFF
-#define PLL_DIV_P_SHIFT		8
-#define PLL_DIV_P_MASK		0x7
-#define PLL_NORM_FDBK_M_SHIFT	24
-#define PLL_NORM_FDBK_M_MASK	0xFF
-#define PLL_DITH_FDBK_M_SHIFT	16
-#define PLL_DITH_FDBK_M_MASK	0xFFFF
-
-#define PLL2_MOD		(MISC_BASE + 0x01C)
-#define PLL_CLK_CFG		(MISC_BASE + 0x020)
-#define CORE_CLK_CFG		(MISC_BASE + 0x024)
-/* CORE CLK CFG register masks */
-#define PLL_HCLK_RATIO_SHIFT	10
-#define PLL_HCLK_RATIO_MASK	0x3
-#define HCLK_PCLK_RATIO_SHIFT	8
-#define HCLK_PCLK_RATIO_MASK	0x3
-
-#define PERIP_CLK_CFG		(MISC_BASE + 0x028)
-/* PERIP_CLK_CFG register masks */
-#define CLCD_CLK_SHIFT		2
-#define CLCD_CLK_MASK		0x3
-#define UART_CLK_SHIFT		4
-#define UART_CLK_MASK		0x1
-#define FIRDA_CLK_SHIFT		5
-#define FIRDA_CLK_MASK		0x3
-#define GPT0_CLK_SHIFT		8
-#define GPT1_CLK_SHIFT		10
-#define GPT2_CLK_SHIFT		11
-#define GPT3_CLK_SHIFT		12
-#define GPT_CLK_MASK		0x1
-#define AUX_CLK_PLL3_VAL	0
-#define AUX_CLK_PLL1_VAL	1
-
-#define PERIP1_CLK_ENB		(MISC_BASE + 0x02C)
-/* PERIP1_CLK_ENB register masks */
-#define UART0_CLK_ENB		3
-#define UART1_CLK_ENB		4
-#define SSP0_CLK_ENB		5
-#define SSP1_CLK_ENB		6
-#define I2C_CLK_ENB		7
-#define JPEG_CLK_ENB		8
-#define FSMC_CLK_ENB		9
-#define FIRDA_CLK_ENB		10
-#define GPT2_CLK_ENB		11
-#define GPT3_CLK_ENB		12
-#define GPIO2_CLK_ENB		13
-#define SSP2_CLK_ENB		14
-#define ADC_CLK_ENB		15
-#define GPT1_CLK_ENB		11
-#define RTC_CLK_ENB		17
-#define GPIO1_CLK_ENB		18
-#define DMA_CLK_ENB		19
-#define SMI_CLK_ENB		21
-#define CLCD_CLK_ENB		22
-#define GMAC_CLK_ENB		23
-#define USBD_CLK_ENB		24
-#define USBH0_CLK_ENB		25
-#define USBH1_CLK_ENB		26
-
-#define SOC_CORE_ID		(MISC_BASE + 0x030)
-#define RAS_CLK_ENB		(MISC_BASE + 0x034)
-#define PERIP1_SOF_RST		(MISC_BASE + 0x038)
-/* PERIP1_SOF_RST register masks */
-#define JPEG_SOF_RST		8
-
-#define SOC_USER_ID		(MISC_BASE + 0x03C)
-#define RAS_SOF_RST		(MISC_BASE + 0x040)
-#define PRSC1_CLK_CFG		(MISC_BASE + 0x044)
-#define PRSC2_CLK_CFG		(MISC_BASE + 0x048)
-#define PRSC3_CLK_CFG		(MISC_BASE + 0x04C)
-/* gpt synthesizer register masks */
-#define GPT_MSCALE_SHIFT	0
-#define GPT_MSCALE_MASK		0xFFF
-#define GPT_NSCALE_SHIFT	12
-#define GPT_NSCALE_MASK		0xF
-
-#define AMEM_CLK_CFG		(MISC_BASE + 0x050)
-#define EXPI_CLK_CFG		(MISC_BASE + 0x054)
-#define CLCD_CLK_SYNT		(MISC_BASE + 0x05C)
-#define FIRDA_CLK_SYNT		(MISC_BASE + 0x060)
-#define UART_CLK_SYNT		(MISC_BASE + 0x064)
-#define GMAC_CLK_SYNT		(MISC_BASE + 0x068)
-#define RAS1_CLK_SYNT		(MISC_BASE + 0x06C)
-#define RAS2_CLK_SYNT		(MISC_BASE + 0x070)
-#define RAS3_CLK_SYNT		(MISC_BASE + 0x074)
-#define RAS4_CLK_SYNT		(MISC_BASE + 0x078)
-/* aux clk synthesiser register masks for irda to ras4 */
-#define AUX_SYNT_ENB		31
-#define AUX_EQ_SEL_SHIFT	30
-#define AUX_EQ_SEL_MASK		1
-#define AUX_EQ1_SEL		0
-#define AUX_EQ2_SEL		1
-#define AUX_XSCALE_SHIFT	16
-#define AUX_XSCALE_MASK		0xFFF
-#define AUX_YSCALE_SHIFT	0
-#define AUX_YSCALE_MASK		0xFFF
-
-#define ICM1_ARB_CFG		(MISC_BASE + 0x07C)
-#define ICM2_ARB_CFG		(MISC_BASE + 0x080)
-#define ICM3_ARB_CFG		(MISC_BASE + 0x084)
-#define ICM4_ARB_CFG		(MISC_BASE + 0x088)
-#define ICM5_ARB_CFG		(MISC_BASE + 0x08C)
-#define ICM6_ARB_CFG		(MISC_BASE + 0x090)
-#define ICM7_ARB_CFG		(MISC_BASE + 0x094)
-#define ICM8_ARB_CFG		(MISC_BASE + 0x098)
-#define ICM9_ARB_CFG		(MISC_BASE + 0x09C)
 #define DMA_CHN_CFG		(MISC_BASE + 0x0A0)
-#define USB2_PHY_CFG		(MISC_BASE + 0x0A4)
-#define GMAC_CFG_CTR		(MISC_BASE + 0x0A8)
-#define EXPI_CFG_CTR		(MISC_BASE + 0x0AC)
-#define PRC1_LOCK_CTR		(MISC_BASE + 0x0C0)
-#define PRC2_LOCK_CTR		(MISC_BASE + 0x0C4)
-#define PRC3_LOCK_CTR		(MISC_BASE + 0x0C8)
-#define PRC4_LOCK_CTR		(MISC_BASE + 0x0CC)
-#define PRC1_IRQ_CTR		(MISC_BASE + 0x0D0)
-#define PRC2_IRQ_CTR		(MISC_BASE + 0x0D4)
-#define PRC3_IRQ_CTR		(MISC_BASE + 0x0D8)
-#define PRC4_IRQ_CTR		(MISC_BASE + 0x0DC)
-#define PWRDOWN_CFG_CTR		(MISC_BASE + 0x0E0)
-#define COMPSSTL_1V8_CFG	(MISC_BASE + 0x0E4)
-#define COMPSSTL_2V5_CFG	(MISC_BASE + 0x0E8)
-#define COMPCOR_3V3_CFG		(MISC_BASE + 0x0EC)
-#define SSTLPAD_CFG_CTR		(MISC_BASE + 0x0F0)
-#define BIST1_CFG_CTR		(MISC_BASE + 0x0F4)
-#define BIST2_CFG_CTR		(MISC_BASE + 0x0F8)
-#define BIST3_CFG_CTR		(MISC_BASE + 0x0FC)
-#define BIST4_CFG_CTR		(MISC_BASE + 0x100)
-#define BIST5_CFG_CTR		(MISC_BASE + 0x104)
-#define BIST1_STS_RES		(MISC_BASE + 0x108)
-#define BIST2_STS_RES		(MISC_BASE + 0x10C)
-#define BIST3_STS_RES		(MISC_BASE + 0x110)
-#define BIST4_STS_RES		(MISC_BASE + 0x114)
-#define BIST5_STS_RES		(MISC_BASE + 0x118)
-#define SYSERR_CFG_CTR		(MISC_BASE + 0x11C)
 
 #endif /* __MACH_MISC_REGS_H */

arch/arm/mach-spear6xx/include/mach/spear.h

@@ -15,69 +15,25 @@
 #define __MACH_SPEAR6XX_H
 
 #include <asm/memory.h>
-#include <mach/spear600.h>
 
-#define SPEAR6XX_ML_SDRAM_BASE		UL(0x00000000)
 /* ICM1 - Low speed connection */
 #define SPEAR6XX_ICM1_BASE		UL(0xD0000000)
-
+#define VA_SPEAR6XX_ICM1_BASE		UL(0xFD000000)
 #define SPEAR6XX_ICM1_UART0_BASE	UL(0xD0000000)
-#define VA_SPEAR6XX_ICM1_UART0_BASE	IO_ADDRESS(SPEAR6XX_ICM1_UART0_BASE)
-
-#define SPEAR6XX_ICM1_UART1_BASE	UL(0xD0080000)
-#define SPEAR6XX_ICM1_SSP0_BASE		UL(0xD0100000)
-#define SPEAR6XX_ICM1_SSP1_BASE		UL(0xD0180000)
-#define SPEAR6XX_ICM1_I2C_BASE		UL(0xD0200000)
-#define SPEAR6XX_ICM1_JPEG_BASE		UL(0xD0800000)
-#define SPEAR6XX_ICM1_IRDA_BASE		UL(0xD1000000)
-#define SPEAR6XX_ICM1_FSMC_BASE		UL(0xD1800000)
-#define SPEAR6XX_ICM1_NAND_BASE		UL(0xD2000000)
-#define SPEAR6XX_ICM1_SRAM_BASE		UL(0xD2800000)
-
-/* ICM2 - Application Subsystem */
-#define SPEAR6XX_ICM2_BASE		UL(0xD8000000)
-#define SPEAR6XX_ICM2_TMR0_BASE		UL(0xD8000000)
-#define SPEAR6XX_ICM2_TMR1_BASE		UL(0xD8080000)
-#define SPEAR6XX_ICM2_GPIO_BASE		UL(0xD8100000)
-#define SPEAR6XX_ICM2_SSP2_BASE		UL(0xD8180000)
-#define SPEAR6XX_ICM2_ADC_BASE		UL(0xD8200000)
+#define VA_SPEAR6XX_ICM1_UART0_BASE	(VA_SPEAR6XX_ICM1_2_BASE | SPEAR6XX_ICM1_UART0_BASE)
 
 /* ML-1, 2 - Multi Layer CPU Subsystem */
 #define SPEAR6XX_ML_CPU_BASE		UL(0xF0000000)
-#define SPEAR6XX_CPU_TMR_BASE		UL(0xF0000000)
-#define SPEAR6XX_CPU_GPIO_BASE		UL(0xF0100000)
-#define SPEAR6XX_CPU_VIC_SEC_BASE	UL(0xF1000000)
-#define VA_SPEAR6XX_CPU_VIC_SEC_BASE	IO_ADDRESS(SPEAR6XX_CPU_VIC_SEC_BASE)
-#define SPEAR6XX_CPU_VIC_PRI_BASE	UL(0xF1100000)
-#define VA_SPEAR6XX_CPU_VIC_PRI_BASE	IO_ADDRESS(SPEAR6XX_CPU_VIC_PRI_BASE)
+#define VA_SPEAR6XX_ML_CPU_BASE		UL(0xF0000000)
 
 /* ICM3 - Basic Subsystem */
-#define SPEAR6XX_ICM3_BASE		UL(0xF8000000)
-#define SPEAR6XX_ICM3_SMEM_BASE		UL(0xF8000000)
 #define SPEAR6XX_ICM3_SMI_CTRL_BASE	UL(0xFC000000)
-#define SPEAR6XX_ICM3_CLCD_BASE		UL(0xFC200000)
+#define VA_SPEAR6XX_ICM3_SMI_CTRL_BASE	UL(0xFC000000)
 #define SPEAR6XX_ICM3_DMA_BASE		UL(0xFC400000)
-#define SPEAR6XX_ICM3_SDRAM_CTRL_BASE	UL(0xFC600000)
-#define SPEAR6XX_ICM3_TMR_BASE		UL(0xFC800000)
-#define SPEAR6XX_ICM3_WDT_BASE		UL(0xFC880000)
-#define SPEAR6XX_ICM3_RTC_BASE		UL(0xFC900000)
-#define SPEAR6XX_ICM3_GPIO_BASE		UL(0xFC980000)
 #define SPEAR6XX_ICM3_SYS_CTRL_BASE	UL(0xFCA00000)
-#define VA_SPEAR6XX_ICM3_SYS_CTRL_BASE	IO_ADDRESS(SPEAR6XX_ICM3_SYS_CTRL_BASE)
+#define VA_SPEAR6XX_ICM3_SYS_CTRL_BASE	(VA_SPEAR6XX_ICM3_SMI_CTRL_BASE | SPEAR6XX_ICM3_SYS_CTRL_BASE)
 #define SPEAR6XX_ICM3_MISC_REG_BASE	UL(0xFCA80000)
-#define VA_SPEAR6XX_ICM3_MISC_REG_BASE	IO_ADDRESS(SPEAR6XX_ICM3_MISC_REG_BASE)
-
-/* ICM4 - High Speed Connection */
-#define SPEAR6XX_ICM4_BASE		UL(0xE0000000)
-#define SPEAR6XX_ICM4_GMAC_BASE		UL(0xE0800000)
-#define SPEAR6XX_ICM4_USBD_FIFO_BASE	UL(0xE1000000)
-#define SPEAR6XX_ICM4_USBD_CSR_BASE	UL(0xE1100000)
-#define SPEAR6XX_ICM4_USBD_PLDT_BASE	UL(0xE1200000)
-#define SPEAR6XX_ICM4_USB_EHCI0_BASE	UL(0xE1800000)
-#define SPEAR6XX_ICM4_USB_OHCI0_BASE	UL(0xE1900000)
-#define SPEAR6XX_ICM4_USB_EHCI1_BASE	UL(0xE2000000)
-#define SPEAR6XX_ICM4_USB_OHCI1_BASE	UL(0xE2100000)
-#define SPEAR6XX_ICM4_USB_ARB_BASE	UL(0xE2800000)
+#define VA_SPEAR6XX_ICM3_MISC_REG_BASE	(VA_SPEAR6XX_ICM3_SMI_CTRL_BASE | SPEAR6XX_ICM3_MISC_REG_BASE)
 
 /* Debug uart for linux, will be used for debug and uncompress messages */
 #define SPEAR_DBG_UART_BASE		SPEAR6XX_ICM1_UART0_BASE

arch/arm/mach-spear6xx/include/mach/spear600.h

@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-spear66xx/include/mach/spear600.h
- *
- * SPEAr600 Machine specific definition
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifdef	CONFIG_MACH_SPEAR600
-
-#ifndef __MACH_SPEAR600_H
-#define __MACH_SPEAR600_H
-
-#endif /* __MACH_SPEAR600_H */
-
-#endif /* CONFIG_MACH_SPEAR600 */

arch/arm/mach-spear6xx/spear6xx.c

@@ -13,41 +13,404 @@
  * warranty of any kind, whether express or implied.
  */
 
+#include <linux/amba/pl08x.h>
+#include <linux/clk.h>
+#include <linux/err.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
+#include <asm/hardware/pl080.h>
 #include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <plat/pl080.h>
 #include <mach/generic.h>
-#include <mach/hardware.h>
+#include <mach/spear.h>
 
-/* Following will create static virtual/physical mappings */
-static struct map_desc spear6xx_io_desc[] __initdata = {
+/* dmac device registration */
+static struct pl08x_channel_data spear600_dma_info[] = {
 	{
-		.virtual	= VA_SPEAR6XX_ICM1_UART0_BASE,
-		.pfn		= __phys_to_pfn(SPEAR6XX_ICM1_UART0_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
+		.bus_id = "ssp1_rx",
+		.min_signal = 0,
+		.max_signal = 0,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
 	}, {
-		.virtual	= VA_SPEAR6XX_CPU_VIC_PRI_BASE,
-		.pfn		= __phys_to_pfn(SPEAR6XX_CPU_VIC_PRI_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
+		.bus_id = "ssp1_tx",
+		.min_signal = 1,
+		.max_signal = 1,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
 	}, {
-		.virtual	= VA_SPEAR6XX_CPU_VIC_SEC_BASE,
-		.pfn		= __phys_to_pfn(SPEAR6XX_CPU_VIC_SEC_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
+		.bus_id = "uart0_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart0_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart1_rx",
+		.min_signal = 4,
+		.max_signal = 4,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart1_tx",
+		.min_signal = 5,
+		.max_signal = 5,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp2_rx",
+		.min_signal = 6,
+		.max_signal = 6,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ssp2_tx",
+		.min_signal = 7,
+		.max_signal = 7,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ssp0_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp0_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "i2c_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "i2c_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "irda",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "adc",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "to_jpeg",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "from_jpeg",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras0_rx",
+		.min_signal = 0,
+		.max_signal = 0,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras0_tx",
+		.min_signal = 1,
+		.max_signal = 1,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras1_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras1_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras2_rx",
+		.min_signal = 4,
+		.max_signal = 4,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras2_tx",
+		.min_signal = 5,
+		.max_signal = 5,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras3_rx",
+		.min_signal = 6,
+		.max_signal = 6,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras3_tx",
+		.min_signal = 7,
+		.max_signal = 7,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras4_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras4_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras5_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras5_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras6_rx",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras6_tx",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras7_rx",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras7_tx",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
 	}, {
-		.virtual	= VA_SPEAR6XX_ICM3_SYS_CTRL_BASE,
-		.pfn		= __phys_to_pfn(SPEAR6XX_ICM3_SYS_CTRL_BASE),
-		.length		= SZ_4K,
+		.bus_id = "ext0_rx",
+		.min_signal = 0,
+		.max_signal = 0,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext0_tx",
+		.min_signal = 1,
+		.max_signal = 1,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext1_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext1_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext2_rx",
+		.min_signal = 4,
+		.max_signal = 4,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext2_tx",
+		.min_signal = 5,
+		.max_signal = 5,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext3_rx",
+		.min_signal = 6,
+		.max_signal = 6,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext3_tx",
+		.min_signal = 7,
+		.max_signal = 7,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext4_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext4_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext5_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext5_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext6_rx",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext6_tx",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext7_rx",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext7_tx",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	},
+};
+
+struct pl08x_platform_data pl080_plat_data = {
+	.memcpy_channel = {
+		.bus_id = "memcpy",
+		.cctl = (PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \
+			PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT | \
+			PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | \
+			PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | \
+			PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE | \
+			PL080_CONTROL_PROT_SYS),
+	},
+	.lli_buses = PL08X_AHB1,
+	.mem_buses = PL08X_AHB1,
+	.get_signal = pl080_get_signal,
+	.put_signal = pl080_put_signal,
+	.slave_channels = spear600_dma_info,
+	.num_slave_channels = ARRAY_SIZE(spear600_dma_info),
+};
+
+/*
+ * Following will create 16MB static virtual/physical mappings
+ * PHYSICAL		VIRTUAL
+ * 0xF0000000		0xF0000000
+ * 0xF1000000		0xF1000000
+ * 0xD0000000		0xFD000000
+ * 0xFC000000		0xFC000000
+ */
+struct map_desc spear6xx_io_desc[] __initdata = {
+	{
+		.virtual	= VA_SPEAR6XX_ML_CPU_BASE,
+		.pfn		= __phys_to_pfn(SPEAR6XX_ML_CPU_BASE),
+		.length		= 2 * SZ_16M,
+		.type		= MT_DEVICE
+	},	{
+		.virtual	= VA_SPEAR6XX_ICM1_BASE,
+		.pfn		= __phys_to_pfn(SPEAR6XX_ICM1_BASE),
+		.length		= SZ_16M,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	= VA_SPEAR6XX_ICM3_MISC_REG_BASE,
-		.pfn		= __phys_to_pfn(SPEAR6XX_ICM3_MISC_REG_BASE),
-		.length		= SZ_4K,
+		.virtual	= VA_SPEAR6XX_ICM3_SMI_CTRL_BASE,
+		.pfn		= __phys_to_pfn(SPEAR6XX_ICM3_SMI_CTRL_BASE),
+		.length		= SZ_16M,
 		.type		= MT_DEVICE
 	},
 };
@@ -56,9 +419,6 @@ static struct map_desc spear6xx_io_desc[] __initdata = {
 void __init spear6xx_map_io(void)
 {
 	iotable_init(spear6xx_io_desc, ARRAY_SIZE(spear6xx_io_desc));
-
-	/* This will initialize clock framework */
-	spear6xx_clk_init();
 }
 
 static void __init spear6xx_timer_init(void)
@@ -66,6 +426,8 @@ static void __init spear6xx_timer_init(void)
 	char pclk_name[] = "pll3_48m_clk";
 	struct clk *gpt_clk, *pclk;
 
+	spear6xx_clk_init();
+
 	/* get the system timer clock */
 	gpt_clk = clk_get_sys("gpt0", NULL);
 	if (IS_ERR(gpt_clk)) {
@@ -85,16 +447,24 @@ static void __init spear6xx_timer_init(void)
 	clk_put(gpt_clk);
 	clk_put(pclk);
 
-	spear_setup_timer();
+	spear_setup_of_timer();
 }
 
 struct sys_timer spear6xx_timer = {
 	.init = spear6xx_timer_init,
 };
 
+/* Add auxdata to pass platform data */
+struct of_dev_auxdata spear6xx_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("arm,pl080", SPEAR6XX_ICM3_DMA_BASE, NULL,
+			&pl080_plat_data),
+	{}
+};
+
 static void __init spear600_dt_init(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+	of_platform_populate(NULL, of_default_bus_match_table,
+			spear6xx_auxdata_lookup, NULL);
 }
 
 static const char *spear600_dt_board_compat[] = {

arch/arm/plat-spear/Kconfig

@@ -8,10 +8,23 @@ choice
 	prompt "ST SPEAr Family"
 	default ARCH_SPEAR3XX
 
+config ARCH_SPEAR13XX
+	bool "ST SPEAr13xx with Device Tree"
+	select ARM_GIC
+	select CPU_V7
+	select USE_OF
+	select HAVE_SMP
+	select MIGHT_HAVE_CACHE_L2X0
+	select PINCTRL
+	help
+	  Supports for ARM's SPEAR13XX family
+
 config ARCH_SPEAR3XX
-	bool "SPEAr3XX"
+	bool "ST SPEAr3xx with Device Tree"
 	select ARM_VIC
 	select CPU_ARM926T
+	select USE_OF
+	select PINCTRL
 	help
 	  Supports for ARM's SPEAR3XX family
 
@@ -25,6 +38,7 @@ config ARCH_SPEAR6XX
 endchoice
 
 # Adding SPEAr machine specific configuration files
+source "arch/arm/mach-spear13xx/Kconfig"
 source "arch/arm/mach-spear3xx/Kconfig"
 source "arch/arm/mach-spear6xx/Kconfig"
 

arch/arm/plat-spear/Makefile

@@ -3,6 +3,7 @@
 #
 
 # Common support
-obj-y	:= clock.o restart.o time.o
+obj-y	:= restart.o time.o
 
-obj-$(CONFIG_ARCH_SPEAR3XX)	+= shirq.o padmux.o
+obj-$(CONFIG_ARCH_SPEAR3XX)	+= pl080.o shirq.o
+obj-$(CONFIG_ARCH_SPEAR6XX)	+= pl080.o

arch/arm/plat-spear/clock.c

@@ -1,1005 +0,0 @@
-/*
- * arch/arm/plat-spear/clock.c
- *
- * Clock framework for SPEAr platform
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/bug.h>
-#include <linux/clk.h>
-#include <linux/debugfs.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/list.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <plat/clock.h>
-
-static DEFINE_SPINLOCK(clocks_lock);
-static LIST_HEAD(root_clks);
-#ifdef CONFIG_DEBUG_FS
-static LIST_HEAD(clocks);
-#endif
-
-static void propagate_rate(struct clk *, int on_init);
-#ifdef CONFIG_DEBUG_FS
-static int clk_debugfs_reparent(struct clk *);
-#endif
-
-static int generic_clk_enable(struct clk *clk)
-{
-	unsigned int val;
-
-	if (!clk->en_reg)
-		return -EFAULT;
-
-	val = readl(clk->en_reg);
-	if (unlikely(clk->flags & RESET_TO_ENABLE))
-		val &= ~(1 << clk->en_reg_bit);
-	else
-		val |= 1 << clk->en_reg_bit;
-
-	writel(val, clk->en_reg);
-
-	return 0;
-}
-
-static void generic_clk_disable(struct clk *clk)
-{
-	unsigned int val;
-
-	if (!clk->en_reg)
-		return;
-
-	val = readl(clk->en_reg);
-	if (unlikely(clk->flags & RESET_TO_ENABLE))
-		val |= 1 << clk->en_reg_bit;
-	else
-		val &= ~(1 << clk->en_reg_bit);
-
-	writel(val, clk->en_reg);
-}
-
-/* generic clk ops */
-static struct clkops generic_clkops = {
-	.enable = generic_clk_enable,
-	.disable = generic_clk_disable,
-};
-
-/* returns current programmed clocks clock info structure */
-static struct pclk_info *pclk_info_get(struct clk *clk)
-{
-	unsigned int val, i;
-	struct pclk_info *info = NULL;
-
-	val = (readl(clk->pclk_sel->pclk_sel_reg) >> clk->pclk_sel_shift)
-		& clk->pclk_sel->pclk_sel_mask;
-
-	for (i = 0; i < clk->pclk_sel->pclk_count; i++) {
-		if (clk->pclk_sel->pclk_info[i].pclk_val == val)
-			info = &clk->pclk_sel->pclk_info[i];
-	}
-
-	return info;
-}
-
-/*
- * Set Update pclk, and pclk_info of clk and add clock sibling node to current
- * parents children list
- */
-static void clk_reparent(struct clk *clk, struct pclk_info *pclk_info)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	list_del(&clk->sibling);
-	list_add(&clk->sibling, &pclk_info->pclk->children);
-
-	clk->pclk = pclk_info->pclk;
-	spin_unlock_irqrestore(&clocks_lock, flags);
-
-#ifdef CONFIG_DEBUG_FS
-	clk_debugfs_reparent(clk);
-#endif
-}
-
-static void do_clk_disable(struct clk *clk)
-{
-	if (!clk)
-		return;
-
-	if (!clk->usage_count) {
-		WARN_ON(1);
-		return;
-	}
-
-	clk->usage_count--;
-
-	if (clk->usage_count == 0) {
-		/*
-		 * Surely, there are no active childrens or direct users
-		 * of this clock
-		 */
-		if (clk->pclk)
-			do_clk_disable(clk->pclk);
-
-		if (clk->ops && clk->ops->disable)
-			clk->ops->disable(clk);
-	}
-}
-
-static int do_clk_enable(struct clk *clk)
-{
-	int ret = 0;
-
-	if (!clk)
-		return -EFAULT;
-
-	if (clk->usage_count == 0) {
-		if (clk->pclk) {
-			ret = do_clk_enable(clk->pclk);
-			if (ret)
-				goto err;
-		}
-		if (clk->ops && clk->ops->enable) {
-			ret = clk->ops->enable(clk);
-			if (ret) {
-				if (clk->pclk)
-					do_clk_disable(clk->pclk);
-				goto err;
-			}
-		}
-		/*
-		 * Since the clock is going to be used for the first
-		 * time please reclac
-		 */
-		if (clk->recalc) {
-			ret = clk->recalc(clk);
-			if (ret)
-				goto err;
-		}
-	}
-	clk->usage_count++;
-err:
-	return ret;
-}
-
-/*
- * clk_enable - inform the system when the clock source should be running.
- * @clk: clock source
- *
- * If the clock can not be enabled/disabled, this should return success.
- *
- * Returns success (0) or negative errno.
- */
-int clk_enable(struct clk *clk)
-{
-	unsigned long flags;
-	int ret = 0;
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	ret = do_clk_enable(clk);
-	spin_unlock_irqrestore(&clocks_lock, flags);
-	return ret;
-}
-EXPORT_SYMBOL(clk_enable);
-
-/*
- * clk_disable - inform the system when the clock source is no longer required.
- * @clk: clock source
- *
- * Inform the system that a clock source is no longer required by
- * a driver and may be shut down.
- *
- * Implementation detail: if the clock source is shared between
- * multiple drivers, clk_enable() calls must be balanced by the
- * same number of clk_disable() calls for the clock source to be
- * disabled.
- */
-void clk_disable(struct clk *clk)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	do_clk_disable(clk);
-	spin_unlock_irqrestore(&clocks_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-/**
- * clk_get_rate - obtain the current clock rate (in Hz) for a clock source.
- *		 This is only valid once the clock source has been enabled.
- * @clk: clock source
- */
-unsigned long clk_get_rate(struct clk *clk)
-{
-	unsigned long flags, rate;
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	rate = clk->rate;
-	spin_unlock_irqrestore(&clocks_lock, flags);
-
-	return rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-/**
- * clk_set_parent - set the parent clock source for this clock
- * @clk: clock source
- * @parent: parent clock source
- *
- * Returns success (0) or negative errno.
- */
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	int i, found = 0, val = 0;
-	unsigned long flags;
-
-	if (!clk || !parent)
-		return -EFAULT;
-	if (clk->pclk == parent)
-		return 0;
-	if (!clk->pclk_sel)
-		return -EPERM;
-
-	/* check if requested parent is in clk parent list */
-	for (i = 0; i < clk->pclk_sel->pclk_count; i++) {
-		if (clk->pclk_sel->pclk_info[i].pclk == parent) {
-			found = 1;
-			break;
-		}
-	}
-
-	if (!found)
-		return -EINVAL;
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	/* reflect parent change in hardware */
-	val = readl(clk->pclk_sel->pclk_sel_reg);
-	val &= ~(clk->pclk_sel->pclk_sel_mask << clk->pclk_sel_shift);
-	val |= clk->pclk_sel->pclk_info[i].pclk_val << clk->pclk_sel_shift;
-	writel(val, clk->pclk_sel->pclk_sel_reg);
-	spin_unlock_irqrestore(&clocks_lock, flags);
-
-	/* reflect parent change in software */
-	clk_reparent(clk, &clk->pclk_sel->pclk_info[i]);
-
-	propagate_rate(clk, 0);
-	return 0;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-/**
- * clk_set_rate - set the clock rate for a clock source
- * @clk: clock source
- * @rate: desired clock rate in Hz
- *
- * Returns success (0) or negative errno.
- */
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long flags;
-	int ret = -EINVAL;
-
-	if (!clk || !rate)
-		return -EFAULT;
-
-	if (clk->set_rate) {
-		spin_lock_irqsave(&clocks_lock, flags);
-		ret = clk->set_rate(clk, rate);
-		if (!ret)
-			/* if successful -> propagate */
-			propagate_rate(clk, 0);
-		spin_unlock_irqrestore(&clocks_lock, flags);
-	} else if (clk->pclk) {
-		u32 mult = clk->div_factor ? clk->div_factor : 1;
-		ret = clk_set_rate(clk->pclk, mult * rate);
-	}
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-/* registers clock in platform clock framework */
-void clk_register(struct clk_lookup *cl)
-{
-	struct clk *clk;
-	unsigned long flags;
-
-	if (!cl || !cl->clk)
-		return;
-	clk = cl->clk;
-
-	spin_lock_irqsave(&clocks_lock, flags);
-
-	INIT_LIST_HEAD(&clk->children);
-	if (clk->flags & ALWAYS_ENABLED)
-		clk->ops = NULL;
-	else if (!clk->ops)
-		clk->ops = &generic_clkops;
-
-	/* root clock don't have any parents */
-	if (!clk->pclk && !clk->pclk_sel) {
-		list_add(&clk->sibling, &root_clks);
-	} else if (clk->pclk && !clk->pclk_sel) {
-		/* add clocks with only one parent to parent's children list */
-		list_add(&clk->sibling, &clk->pclk->children);
-	} else {
-		/* clocks with more than one parent */
-		struct pclk_info *pclk_info;
-
-		pclk_info = pclk_info_get(clk);
-		if (!pclk_info) {
-			pr_err("CLKDEV: invalid pclk info of clk with"
-					" %s dev_id and %s con_id\n",
-					cl->dev_id, cl->con_id);
-		} else {
-			clk->pclk = pclk_info->pclk;
-			list_add(&clk->sibling, &pclk_info->pclk->children);
-		}
-	}
-
-	spin_unlock_irqrestore(&clocks_lock, flags);
-
-	/* debugfs specific */
-#ifdef CONFIG_DEBUG_FS
-	list_add(&clk->node, &clocks);
-	clk->cl = cl;
-#endif
-
-	/* add clock to arm clockdev framework */
-	clkdev_add(cl);
-}
-
-/**
- * propagate_rate - recalculate and propagate all clocks to children
- * @pclk: parent clock required to be propogated
- * @on_init: flag for enabling clocks which are ENABLED_ON_INIT.
- *
- * Recalculates all children clocks
- */
-void propagate_rate(struct clk *pclk, int on_init)
-{
-	struct clk *clk, *_temp;
-	int ret = 0;
-
-	list_for_each_entry_safe(clk, _temp, &pclk->children, sibling) {
-		if (clk->recalc) {
-			ret = clk->recalc(clk);
-			/*
-			 * recalc will return error if clk out is not programmed
-			 * In this case configure default rate.
-			 */
-			if (ret && clk->set_rate)
-				clk->set_rate(clk, 0);
-		}
-		propagate_rate(clk, on_init);
-
-		if (!on_init)
-			continue;
-
-		/* Enable clks enabled on init, in software view */
-		if (clk->flags & ENABLED_ON_INIT)
-			do_clk_enable(clk);
-	}
-}
-
-/**
- * round_rate_index - return closest programmable rate index in rate_config tbl
- * @clk: ptr to clock structure
- * @drate: desired rate
- * @rate: final rate will be returned in this variable only.
- *
- * Finds index in rate_config for highest clk rate which is less than
- * requested rate. If there is no clk rate lesser than requested rate then
- * -EINVAL is returned. This routine assumes that rate_config is written
- * in incrementing order of clk rates.
- * If drate passed is zero then default rate is programmed.
- */
-static int
-round_rate_index(struct clk *clk, unsigned long drate, unsigned long *rate)
-{
-	unsigned long tmp = 0, prev_rate = 0;
-	int index;
-
-	if (!clk->calc_rate)
-		return -EFAULT;
-
-	if (!drate)
-		return -EINVAL;
-
-	/*
-	 * This loops ends on two conditions:
-	 * - as soon as clk is found with rate greater than requested rate.
-	 * - if all clks in rate_config are smaller than requested rate.
-	 */
-	for (index = 0; index < clk->rate_config.count; index++) {
-		prev_rate = tmp;
-		tmp = clk->calc_rate(clk, index);
-		if (drate < tmp) {
-			index--;
-			break;
-		}
-	}
-	/* return if can't find suitable clock */
-	if (index < 0) {
-		index = -EINVAL;
-		*rate = 0;
-	} else if (index == clk->rate_config.count) {
-		/* program with highest clk rate possible */
-		index = clk->rate_config.count - 1;
-		*rate = tmp;
-	} else
-		*rate = prev_rate;
-
-	return index;
-}
-
-/**
- * clk_round_rate - adjust a rate to the exact rate a clock can provide
- * @clk: clock source
- * @rate: desired clock rate in Hz
- *
- * Returns rounded clock rate in Hz, or negative errno.
- */
-long clk_round_rate(struct clk *clk, unsigned long drate)
-{
-	long rate = 0;
-	int index;
-
-	/*
-	 * propagate call to parent who supports calc_rate. Similar approach is
-	 * used in clk_set_rate.
-	 */
-	if (!clk->calc_rate) {
-		u32 mult;
-		if (!clk->pclk)
-			return clk->rate;
-
-		mult = clk->div_factor ? clk->div_factor : 1;
-		return clk_round_rate(clk->pclk, mult * drate) / mult;
-	}
-
-	index = round_rate_index(clk, drate, &rate);
-	if (index >= 0)
-		return rate;
-	else
-		return index;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-/*All below functions are called with lock held */
-
-/*
- * Calculates pll clk rate for specific value of mode, m, n and p
- *
- * In normal mode
- * rate = (2 * M[15:8] * Fin)/(N * 2^P)
- *
- * In Dithered mode
- * rate = (2 * M[15:0] * Fin)/(256 * N * 2^P)
- */
-unsigned long pll_calc_rate(struct clk *clk, int index)
-{
-	unsigned long rate = clk->pclk->rate;
-	struct pll_rate_tbl *tbls = clk->rate_config.tbls;
-	unsigned int mode;
-
-	mode = tbls[index].mode ? 256 : 1;
-	return (((2 * rate / 10000) * tbls[index].m) /
-			(mode * tbls[index].n * (1 << tbls[index].p))) * 10000;
-}
-
-/*
- * calculates current programmed rate of pll1
- *
- * In normal mode
- * rate = (2 * M[15:8] * Fin)/(N * 2^P)
- *
- * In Dithered mode
- * rate = (2 * M[15:0] * Fin)/(256 * N * 2^P)
- */
-int pll_clk_recalc(struct clk *clk)
-{
-	struct pll_clk_config *config = clk->private_data;
-	unsigned int num = 2, den = 0, val, mode = 0;
-
-	mode = (readl(config->mode_reg) >> config->masks->mode_shift) &
-		config->masks->mode_mask;
-
-	val = readl(config->cfg_reg);
-	/* calculate denominator */
-	den = (val >> config->masks->div_p_shift) & config->masks->div_p_mask;
-	den = 1 << den;
-	den *= (val >> config->masks->div_n_shift) & config->masks->div_n_mask;
-
-	/* calculate numerator & denominator */
-	if (!mode) {
-		/* Normal mode */
-		num *= (val >> config->masks->norm_fdbk_m_shift) &
-			config->masks->norm_fdbk_m_mask;
-	} else {
-		/* Dithered mode */
-		num *= (val >> config->masks->dith_fdbk_m_shift) &
-			config->masks->dith_fdbk_m_mask;
-		den *= 256;
-	}
-
-	if (!den)
-		return -EINVAL;
-
-	clk->rate = (((clk->pclk->rate/10000) * num) / den) * 10000;
-	return 0;
-}
-
-/*
- * Configures new clock rate of pll
- */
-int pll_clk_set_rate(struct clk *clk, unsigned long desired_rate)
-{
-	struct pll_rate_tbl *tbls = clk->rate_config.tbls;
-	struct pll_clk_config *config = clk->private_data;
-	unsigned long val, rate;
-	int i;
-
-	i = round_rate_index(clk, desired_rate, &rate);
-	if (i < 0)
-		return i;
-
-	val = readl(config->mode_reg) &
-		~(config->masks->mode_mask << config->masks->mode_shift);
-	val |= (tbls[i].mode & config->masks->mode_mask) <<
-		config->masks->mode_shift;
-	writel(val, config->mode_reg);
-
-	val = readl(config->cfg_reg) &
-		~(config->masks->div_p_mask << config->masks->div_p_shift);
-	val |= (tbls[i].p & config->masks->div_p_mask) <<
-		config->masks->div_p_shift;
-	val &= ~(config->masks->div_n_mask << config->masks->div_n_shift);
-	val |= (tbls[i].n & config->masks->div_n_mask) <<
-		config->masks->div_n_shift;
-	val &= ~(config->masks->dith_fdbk_m_mask <<
-			config->masks->dith_fdbk_m_shift);
-	if (tbls[i].mode)
-		val |= (tbls[i].m & config->masks->dith_fdbk_m_mask) <<
-			config->masks->dith_fdbk_m_shift;
-	else
-		val |= (tbls[i].m & config->masks->norm_fdbk_m_mask) <<
-			config->masks->norm_fdbk_m_shift;
-
-	writel(val, config->cfg_reg);
-
-	clk->rate = rate;
-
-	return 0;
-}
-
-/*
- * Calculates ahb, apb clk rate for specific value of div
- */
-unsigned long bus_calc_rate(struct clk *clk, int index)
-{
-	unsigned long rate = clk->pclk->rate;
-	struct bus_rate_tbl *tbls = clk->rate_config.tbls;
-
-	return rate / (tbls[index].div + 1);
-}
-
-/* calculates current programmed rate of ahb or apb bus */
-int bus_clk_recalc(struct clk *clk)
-{
-	struct bus_clk_config *config = clk->private_data;
-	unsigned int div;
-
-	div = ((readl(config->reg) >> config->masks->shift) &
-			config->masks->mask) + 1;
-
-	if (!div)
-		return -EINVAL;
-
-	clk->rate = (unsigned long)clk->pclk->rate / div;
-	return 0;
-}
-
-/* Configures new clock rate of AHB OR APB bus */
-int bus_clk_set_rate(struct clk *clk, unsigned long desired_rate)
-{
-	struct bus_rate_tbl *tbls = clk->rate_config.tbls;
-	struct bus_clk_config *config = clk->private_data;
-	unsigned long val, rate;
-	int i;
-
-	i = round_rate_index(clk, desired_rate, &rate);
-	if (i < 0)
-		return i;
-
-	val = readl(config->reg) &
-		~(config->masks->mask << config->masks->shift);
-	val |= (tbls[i].div & config->masks->mask) << config->masks->shift;
-	writel(val, config->reg);
-
-	clk->rate = rate;
-
-	return 0;
-}
-
-/*
- * gives rate for different values of eq, x and y
- *
- * Fout from synthesizer can be given from two equations:
- * Fout1 = (Fin * X/Y)/2		EQ1
- * Fout2 = Fin * X/Y			EQ2
- */
-unsigned long aux_calc_rate(struct clk *clk, int index)
-{
-	unsigned long rate = clk->pclk->rate;
-	struct aux_rate_tbl *tbls = clk->rate_config.tbls;
-	u8 eq = tbls[index].eq ? 1 : 2;
-
-	return (((rate/10000) * tbls[index].xscale) /
-			(tbls[index].yscale * eq)) * 10000;
-}
-
-/*
- * calculates current programmed rate of auxiliary synthesizers
- * used by: UART, FIRDA
- *
- * Fout from synthesizer can be given from two equations:
- * Fout1 = (Fin * X/Y)/2
- * Fout2 = Fin * X/Y
- *
- * Selection of eqn 1 or 2 is programmed in register
- */
-int aux_clk_recalc(struct clk *clk)
-{
-	struct aux_clk_config *config = clk->private_data;
-	unsigned int num = 1, den = 1, val, eqn;
-
-	val = readl(config->synth_reg);
-
-	eqn = (val >> config->masks->eq_sel_shift) &
-		config->masks->eq_sel_mask;
-	if (eqn == config->masks->eq1_mask)
-		den *= 2;
-
-	/* calculate numerator */
-	num = (val >> config->masks->xscale_sel_shift) &
-		config->masks->xscale_sel_mask;
-
-	/* calculate denominator */
-	den *= (val >> config->masks->yscale_sel_shift) &
-		config->masks->yscale_sel_mask;
-
-	if (!den)
-		return -EINVAL;
-
-	clk->rate = (((clk->pclk->rate/10000) * num) / den) * 10000;
-	return 0;
-}
-
-/* Configures new clock rate of auxiliary synthesizers used by: UART, FIRDA*/
-int aux_clk_set_rate(struct clk *clk, unsigned long desired_rate)
-{
-	struct aux_rate_tbl *tbls = clk->rate_config.tbls;
-	struct aux_clk_config *config = clk->private_data;
-	unsigned long val, rate;
-	int i;
-
-	i = round_rate_index(clk, desired_rate, &rate);
-	if (i < 0)
-		return i;
-
-	val = readl(config->synth_reg) &
-		~(config->masks->eq_sel_mask << config->masks->eq_sel_shift);
-	val |= (tbls[i].eq & config->masks->eq_sel_mask) <<
-		config->masks->eq_sel_shift;
-	val &= ~(config->masks->xscale_sel_mask <<
-			config->masks->xscale_sel_shift);
-	val |= (tbls[i].xscale & config->masks->xscale_sel_mask) <<
-		config->masks->xscale_sel_shift;
-	val &= ~(config->masks->yscale_sel_mask <<
-			config->masks->yscale_sel_shift);
-	val |= (tbls[i].yscale & config->masks->yscale_sel_mask) <<
-		config->masks->yscale_sel_shift;
-	writel(val, config->synth_reg);
-
-	clk->rate = rate;
-
-	return 0;
-}
-
-/*
- * Calculates gpt clk rate for different values of mscale and nscale
- *
- * Fout= Fin/((2 ^ (N+1)) * (M+1))
- */
-unsigned long gpt_calc_rate(struct clk *clk, int index)
-{
-	unsigned long rate = clk->pclk->rate;
-	struct gpt_rate_tbl *tbls = clk->rate_config.tbls;
-
-	return rate / ((1 << (tbls[index].nscale + 1)) *
-			(tbls[index].mscale + 1));
-}
-
-/*
- * calculates current programmed rate of gpt synthesizers
- * Fout from synthesizer can be given from below equations:
- * Fout= Fin/((2 ^ (N+1)) * (M+1))
- */
-int gpt_clk_recalc(struct clk *clk)
-{
-	struct gpt_clk_config *config = clk->private_data;
-	unsigned int div = 1, val;
-
-	val = readl(config->synth_reg);
-	div += (val >> config->masks->mscale_sel_shift) &
-		config->masks->mscale_sel_mask;
-	div *= 1 << (((val >> config->masks->nscale_sel_shift) &
-				config->masks->nscale_sel_mask) + 1);
-
-	if (!div)
-		return -EINVAL;
-
-	clk->rate = (unsigned long)clk->pclk->rate / div;
-	return 0;
-}
-
-/* Configures new clock rate of gptiliary synthesizers used by: UART, FIRDA*/
-int gpt_clk_set_rate(struct clk *clk, unsigned long desired_rate)
-{
-	struct gpt_rate_tbl *tbls = clk->rate_config.tbls;
-	struct gpt_clk_config *config = clk->private_data;
-	unsigned long val, rate;
-	int i;
-
-	i = round_rate_index(clk, desired_rate, &rate);
-	if (i < 0)
-		return i;
-
-	val = readl(config->synth_reg) & ~(config->masks->mscale_sel_mask <<
-			config->masks->mscale_sel_shift);
-	val |= (tbls[i].mscale & config->masks->mscale_sel_mask) <<
-		config->masks->mscale_sel_shift;
-	val &= ~(config->masks->nscale_sel_mask <<
-			config->masks->nscale_sel_shift);
-	val |= (tbls[i].nscale & config->masks->nscale_sel_mask) <<
-		config->masks->nscale_sel_shift;
-	writel(val, config->synth_reg);
-
-	clk->rate = rate;
-
-	return 0;
-}
-
-/*
- * Calculates clcd clk rate for different values of div
- *
- * Fout from synthesizer can be given from below equation:
- * Fout= Fin/2*div (division factor)
- * div is 17 bits:-
- *	0-13 (fractional part)
- *	14-16 (integer part)
- * To calculate Fout we left shift val by 14 bits and divide Fin by
- * complete div (including fractional part) and then right shift the
- * result by 14 places.
- */
-unsigned long clcd_calc_rate(struct clk *clk, int index)
-{
-	unsigned long rate = clk->pclk->rate;
-	struct clcd_rate_tbl *tbls = clk->rate_config.tbls;
-
-	rate /= 1000;
-	rate <<= 12;
-	rate /= (2 * tbls[index].div);
-	rate >>= 12;
-	rate *= 1000;
-
-	return rate;
-}
-
-/*
- * calculates current programmed rate of clcd synthesizer
- * Fout from synthesizer can be given from below equation:
- * Fout= Fin/2*div (division factor)
- * div is 17 bits:-
- *	0-13 (fractional part)
- *	14-16 (integer part)
- * To calculate Fout we left shift val by 14 bits and divide Fin by
- * complete div (including fractional part) and then right shift the
- * result by 14 places.
- */
-int clcd_clk_recalc(struct clk *clk)
-{
-	struct clcd_clk_config *config = clk->private_data;
-	unsigned int div = 1;
-	unsigned long prate;
-	unsigned int val;
-
-	val = readl(config->synth_reg);
-	div = (val >> config->masks->div_factor_shift) &
-		config->masks->div_factor_mask;
-
-	if (!div)
-		return -EINVAL;
-
-	prate = clk->pclk->rate / 1000; /* first level division, make it KHz */
-
-	clk->rate = (((unsigned long)prate << 12) / (2 * div)) >> 12;
-	clk->rate *= 1000;
-	return 0;
-}
-
-/* Configures new clock rate of auxiliary synthesizers used by: UART, FIRDA*/
-int clcd_clk_set_rate(struct clk *clk, unsigned long desired_rate)
-{
-	struct clcd_rate_tbl *tbls = clk->rate_config.tbls;
-	struct clcd_clk_config *config = clk->private_data;
-	unsigned long val, rate;
-	int i;
-
-	i = round_rate_index(clk, desired_rate, &rate);
-	if (i < 0)
-		return i;
-
-	val = readl(config->synth_reg) & ~(config->masks->div_factor_mask <<
-			config->masks->div_factor_shift);
-	val |= (tbls[i].div & config->masks->div_factor_mask) <<
-		config->masks->div_factor_shift;
-	writel(val, config->synth_reg);
-
-	clk->rate = rate;
-
-	return 0;
-}
-
-/*
- * Used for clocks that always have value as the parent clock divided by a
- * fixed divisor
- */
-int follow_parent(struct clk *clk)
-{
-	unsigned int div_factor = (clk->div_factor < 1) ? 1 : clk->div_factor;
-
-	clk->rate = clk->pclk->rate/div_factor;
-	return 0;
-}
-
-/**
- * recalc_root_clocks - recalculate and propagate all root clocks
- *
- * Recalculates all root clocks (clocks with no parent), which if the
- * clock's .recalc is set correctly, should also propagate their rates.
- */
-void recalc_root_clocks(void)
-{
-	struct clk *pclk;
-	unsigned long flags;
-	int ret = 0;
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	list_for_each_entry(pclk, &root_clks, sibling) {
-		if (pclk->recalc) {
-			ret = pclk->recalc(pclk);
-			/*
-			 * recalc will return error if clk out is not programmed
-			 * In this case configure default clock.
-			 */
-			if (ret && pclk->set_rate)
-				pclk->set_rate(pclk, 0);
-		}
-		propagate_rate(pclk, 1);
-		/* Enable clks enabled on init, in software view */
-		if (pclk->flags & ENABLED_ON_INIT)
-			do_clk_enable(pclk);
-	}
-	spin_unlock_irqrestore(&clocks_lock, flags);
-}
-
-void __init clk_init(void)
-{
-	recalc_root_clocks();
-}
-
-#ifdef CONFIG_DEBUG_FS
-/*
- *	debugfs support to trace clock tree hierarchy and attributes
- */
-static struct dentry *clk_debugfs_root;
-static int clk_debugfs_register_one(struct clk *c)
-{
-	int err;
-	struct dentry *d;
-	struct clk *pa = c->pclk;
-	char s[255];
-	char *p = s;
-
-	if (c) {
-		if (c->cl->con_id)
-			p += sprintf(p, "%s", c->cl->con_id);
-		if (c->cl->dev_id)
-			p += sprintf(p, "%s", c->cl->dev_id);
-	}
-	d = debugfs_create_dir(s, pa ? pa->dent : clk_debugfs_root);
-	if (!d)
-		return -ENOMEM;
-	c->dent = d;
-
-	d = debugfs_create_u32("usage_count", S_IRUGO, c->dent,
-			(u32 *)&c->usage_count);
-	if (!d) {
-		err = -ENOMEM;
-		goto err_out;
-	}
-	d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
-	if (!d) {
-		err = -ENOMEM;
-		goto err_out;
-	}
-	d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags);
-	if (!d) {
-		err = -ENOMEM;
-		goto err_out;
-	}
-	return 0;
-
-err_out:
-	debugfs_remove_recursive(c->dent);
-	return err;
-}
-
-static int clk_debugfs_register(struct clk *c)
-{
-	int err;
-	struct clk *pa = c->pclk;
-
-	if (pa && !pa->dent) {
-		err = clk_debugfs_register(pa);
-		if (err)
-			return err;
-	}
-
-	if (!c->dent) {
-		err = clk_debugfs_register_one(c);
-		if (err)
-			return err;
-	}
-	return 0;
-}
-
-static int __init clk_debugfs_init(void)
-{
-	struct clk *c;
-	struct dentry *d;
-	int err;
-
-	d = debugfs_create_dir("clock", NULL);
-	if (!d)
-		return -ENOMEM;
-	clk_debugfs_root = d;
-
-	list_for_each_entry(c, &clocks, node) {
-		err = clk_debugfs_register(c);
-		if (err)
-			goto err_out;
-	}
-	return 0;
-err_out:
-	debugfs_remove_recursive(clk_debugfs_root);
-	return err;
-}
-late_initcall(clk_debugfs_init);
-
-static int clk_debugfs_reparent(struct clk *c)
-{
-	debugfs_remove(c->dent);
-	return clk_debugfs_register_one(c);
-}
-#endif /* CONFIG_DEBUG_FS */

arch/arm/plat-spear/include/plat/clock.h

@@ -1,249 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/clock.h
- *
- * Clock framework definitions for SPEAr platform
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_CLOCK_H
-#define __PLAT_CLOCK_H
-
-#include <linux/list.h>
-#include <linux/clkdev.h>
-#include <linux/types.h>
-
-/* clk structure flags */
-#define	ALWAYS_ENABLED		(1 << 0) /* clock always enabled */
-#define	RESET_TO_ENABLE		(1 << 1) /* reset register bit to enable clk */
-#define	ENABLED_ON_INIT		(1 << 2) /* clocks enabled at init */
-
-/**
- * struct clkops - clock operations
- * @enable: pointer to clock enable function
- * @disable: pointer to clock disable function
- */
-struct clkops {
-	int (*enable) (struct clk *);
-	void (*disable) (struct clk *);
-};
-
-/**
- * struct pclk_info - parents info
- * @pclk: pointer to parent clk
- * @pclk_val: value to be written for selecting this parent
- */
-struct pclk_info {
-	struct clk *pclk;
-	u8 pclk_val;
-};
-
-/**
- * struct pclk_sel - parents selection configuration
- * @pclk_info: pointer to array of parent clock info
- * @pclk_count: number of parents
- * @pclk_sel_reg: register for selecting a parent
- * @pclk_sel_mask: mask for selecting parent (can be used to clear bits also)
- */
-struct pclk_sel {
-	struct pclk_info *pclk_info;
-	u8 pclk_count;
-	void __iomem *pclk_sel_reg;
-	unsigned int pclk_sel_mask;
-};
-
-/**
- * struct rate_config - clk rate configurations
- * @tbls: array of device specific clk rate tables, in ascending order of rates
- * @count: size of tbls array
- * @default_index: default setting when originally disabled
- */
-struct rate_config {
-	void *tbls;
-	u8 count;
-	u8 default_index;
-};
-
-/**
- * struct clk - clock structure
- * @usage_count: num of users who enabled this clock
- * @flags: flags for clock properties
- * @rate: programmed clock rate in Hz
- * @en_reg: clk enable/disable reg
- * @en_reg_bit: clk enable/disable bit
- * @ops: clk enable/disable ops - generic_clkops selected if NULL
- * @recalc: pointer to clock rate recalculate function
- * @set_rate: pointer to clock set rate function
- * @calc_rate: pointer to clock get rate function for index
- * @rate_config: rate configuration information, used by set_rate
- * @div_factor: division factor to parent clock.
- * @pclk: current parent clk
- * @pclk_sel: pointer to parent selection structure
- * @pclk_sel_shift: register shift for selecting parent of this clock
- * @children: list for childrens or this clock
- * @sibling: node for list of clocks having same parents
- * @private_data: clock specific private data
- * @node: list to maintain clocks linearly
- * @cl: clocklook up associated with this clock
- * @dent: object for debugfs
- */
-struct clk {
-	unsigned int usage_count;
-	unsigned int flags;
-	unsigned long rate;
-	void __iomem *en_reg;
-	u8 en_reg_bit;
-	const struct clkops *ops;
-	int (*recalc) (struct clk *);
-	int (*set_rate) (struct clk *, unsigned long rate);
-	unsigned long (*calc_rate)(struct clk *, int index);
-	struct rate_config rate_config;
-	unsigned int div_factor;
-
-	struct clk *pclk;
-	struct pclk_sel *pclk_sel;
-	unsigned int pclk_sel_shift;
-
-	struct list_head children;
-	struct list_head sibling;
-	void *private_data;
-#ifdef CONFIG_DEBUG_FS
-	struct list_head node;
-	struct clk_lookup *cl;
-	struct dentry *dent;
-#endif
-};
-
-/* pll configuration structure */
-struct pll_clk_masks {
-	u32 mode_mask;
-	u32 mode_shift;
-
-	u32 norm_fdbk_m_mask;
-	u32 norm_fdbk_m_shift;
-	u32 dith_fdbk_m_mask;
-	u32 dith_fdbk_m_shift;
-	u32 div_p_mask;
-	u32 div_p_shift;
-	u32 div_n_mask;
-	u32 div_n_shift;
-};
-
-struct pll_clk_config {
-	void __iomem *mode_reg;
-	void __iomem *cfg_reg;
-	struct pll_clk_masks *masks;
-};
-
-/* pll clk rate config structure */
-struct pll_rate_tbl {
-	u8 mode;
-	u16 m;
-	u8 n;
-	u8 p;
-};
-
-/* ahb and apb bus configuration structure */
-struct bus_clk_masks {
-	u32 mask;
-	u32 shift;
-};
-
-struct bus_clk_config {
-	void __iomem *reg;
-	struct bus_clk_masks *masks;
-};
-
-/* ahb and apb clk bus rate config structure */
-struct bus_rate_tbl {
-	u8 div;
-};
-
-/* Aux clk configuration structure: applicable to UART and FIRDA */
-struct aux_clk_masks {
-	u32 eq_sel_mask;
-	u32 eq_sel_shift;
-	u32 eq1_mask;
-	u32 eq2_mask;
-	u32 xscale_sel_mask;
-	u32 xscale_sel_shift;
-	u32 yscale_sel_mask;
-	u32 yscale_sel_shift;
-};
-
-struct aux_clk_config {
-	void __iomem *synth_reg;
-	struct aux_clk_masks *masks;
-};
-
-/* aux clk rate config structure */
-struct aux_rate_tbl {
-	u16 xscale;
-	u16 yscale;
-	u8 eq;
-};
-
-/* GPT clk configuration structure */
-struct gpt_clk_masks {
-	u32 mscale_sel_mask;
-	u32 mscale_sel_shift;
-	u32 nscale_sel_mask;
-	u32 nscale_sel_shift;
-};
-
-struct gpt_clk_config {
-	void __iomem *synth_reg;
-	struct gpt_clk_masks *masks;
-};
-
-/* gpt clk rate config structure */
-struct gpt_rate_tbl {
-	u16 mscale;
-	u16 nscale;
-};
-
-/* clcd clk configuration structure */
-struct clcd_synth_masks {
-	u32 div_factor_mask;
-	u32 div_factor_shift;
-};
-
-struct clcd_clk_config {
-	void __iomem *synth_reg;
-	struct clcd_synth_masks *masks;
-};
-
-/* clcd clk rate config structure */
-struct clcd_rate_tbl {
-	u16 div;
-};
-
-/* platform specific clock functions */
-void __init clk_init(void);
-void clk_register(struct clk_lookup *cl);
-void recalc_root_clocks(void);
-
-/* clock recalc & set rate functions */
-int follow_parent(struct clk *clk);
-unsigned long pll_calc_rate(struct clk *clk, int index);
-int pll_clk_recalc(struct clk *clk);
-int pll_clk_set_rate(struct clk *clk, unsigned long desired_rate);
-unsigned long bus_calc_rate(struct clk *clk, int index);
-int bus_clk_recalc(struct clk *clk);
-int bus_clk_set_rate(struct clk *clk, unsigned long desired_rate);
-unsigned long gpt_calc_rate(struct clk *clk, int index);
-int gpt_clk_recalc(struct clk *clk);
-int gpt_clk_set_rate(struct clk *clk, unsigned long desired_rate);
-unsigned long aux_calc_rate(struct clk *clk, int index);
-int aux_clk_recalc(struct clk *clk);
-int aux_clk_set_rate(struct clk *clk, unsigned long desired_rate);
-unsigned long clcd_calc_rate(struct clk *clk, int index);
-int clcd_clk_recalc(struct clk *clk);
-int clcd_clk_set_rate(struct clk *clk, unsigned long desired_rate);
-
-#endif /* __PLAT_CLOCK_H */

arch/arm/plat-spear/include/plat/debug-macro.S

@@ -12,7 +12,7 @@
  */
 
 #include <linux/amba/serial.h>
-#include <mach/hardware.h>
+#include <mach/spear.h>
 
 		.macro	addruart, rp, rv, tmp
 		mov	\rp, #SPEAR_DBG_UART_BASE		@ Physical base

arch/arm/plat-spear/include/plat/hardware.h

@@ -1,17 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/hardware.h
- *
- * Hardware definitions for SPEAr
- *
- * Copyright (C) 2010 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_HARDWARE_H
-#define __PLAT_HARDWARE_H
-
-#endif /* __PLAT_HARDWARE_H */

arch/arm/plat-spear/include/plat/padmux.h

@@ -1,92 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/padmux.h
- *
- * SPEAr platform specific gpio pads muxing file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_PADMUX_H
-#define __PLAT_PADMUX_H
-
-#include <linux/types.h>
-
-/*
- * struct pmx_reg: configuration structure for mode reg and mux reg
- *
- * offset: offset of mode reg
- * mask: mask of mode reg
- */
-struct pmx_reg {
-	u32 offset;
-	u32 mask;
-};
-
-/*
- * struct pmx_dev_mode: configuration structure every group of modes of a device
- *
- * ids: all modes for this configuration
- * mask: mask for supported mode
- */
-struct pmx_dev_mode {
-	u32 ids;
-	u32 mask;
-};
-
-/*
- * struct pmx_mode: mode definition structure
- *
- * name: mode name
- * mask: mode mask
- */
-struct pmx_mode {
-	char *name;
-	u32 id;
-	u32 mask;
-};
-
-/*
- * struct pmx_dev: device definition structure
- *
- * name: device name
- * modes: device configuration array for different modes supported
- * mode_count: size of modes array
- * is_active: is peripheral active/enabled
- * enb_on_reset: if 1, mask bits to be cleared in reg otherwise to be set in reg
- */
-struct pmx_dev {
-	char *name;
-	struct pmx_dev_mode *modes;
-	u8 mode_count;
-	bool is_active;
-	bool enb_on_reset;
-};
-
-/*
- * struct pmx_driver: driver definition structure
- *
- * mode: mode to be set
- * devs: array of pointer to pmx devices
- * devs_count: ARRAY_SIZE of devs
- * base: base address of soc config registers
- * mode_reg: structure of mode config register
- * mux_reg: structure of device mux config register
- */
-struct pmx_driver {
-	struct pmx_mode *mode;
-	struct pmx_dev **devs;
-	u8 devs_count;
-	u32 *base;
-	struct pmx_reg mode_reg;
-	struct pmx_reg mux_reg;
-};
-
-/* pmx functions */
-int pmx_register(struct pmx_driver *driver);
-
-#endif /* __PLAT_PADMUX_H */

arch/arm/plat-spear/include/plat/pl080.h

@@ -0,0 +1,21 @@
+/*
+ * arch/arm/plat-spear/include/plat/pl080.h
+ *
+ * DMAC pl080 definitions for SPEAr platform
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_PL080_H
+#define __PLAT_PL080_H
+
+struct pl08x_dma_chan;
+int pl080_get_signal(struct pl08x_dma_chan *ch);
+void pl080_put_signal(struct pl08x_dma_chan *ch);
+
+#endif /* __PLAT_PL080_H */

arch/arm/plat-spear/include/plat/uncompress.h

@@ -13,7 +13,7 @@
 
 #include <linux/io.h>
 #include <linux/amba/serial.h>
-#include <mach/hardware.h>
+#include <mach/spear.h>
 
 #ifndef __PLAT_UNCOMPRESS_H
 #define __PLAT_UNCOMPRESS_H

arch/arm/plat-spear/padmux.c

@@ -1,164 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/padmux.c
- *
- * SPEAr platform specific gpio pads muxing source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <plat/padmux.h>
-
-/*
- * struct pmx: pmx definition structure
- *
- * base: base address of configuration registers
- * mode_reg: mode configurations
- * mux_reg: muxing configurations
- * active_mode: pointer to current active mode
- */
-struct pmx {
-	u32 base;
-	struct pmx_reg mode_reg;
-	struct pmx_reg mux_reg;
-	struct pmx_mode *active_mode;
-};
-
-static struct pmx *pmx;
-
-/**
- * pmx_mode_set - Enables an multiplexing mode
- * @mode - pointer to pmx mode
- *
- * It will set mode of operation in hardware.
- * Returns -ve on Err otherwise 0
- */
-static int pmx_mode_set(struct pmx_mode *mode)
-{
-	u32 val;
-
-	if (!mode->name)
-		return -EFAULT;
-
-	pmx->active_mode = mode;
-
-	val = readl(pmx->base + pmx->mode_reg.offset);
-	val &= ~pmx->mode_reg.mask;
-	val |= mode->mask & pmx->mode_reg.mask;
-	writel(val, pmx->base + pmx->mode_reg.offset);
-
-	return 0;
-}
-
-/**
- * pmx_devs_enable - Enables list of devices
- * @devs - pointer to pmx device array
- * @count - number of devices to enable
- *
- * It will enable pads for all required peripherals once and only once.
- * If peripheral is not supported by current mode then request is rejected.
- * Conflicts between peripherals are not handled and peripherals will be
- * enabled in the order they are present in pmx_dev array.
- * In case of conflicts last peripheral enabled will be present.
- * Returns -ve on Err otherwise 0
- */
-static int pmx_devs_enable(struct pmx_dev **devs, u8 count)
-{
-	u32 val, i, mask;
-
-	if (!count)
-		return -EINVAL;
-
-	val = readl(pmx->base + pmx->mux_reg.offset);
-	for (i = 0; i < count; i++) {
-		u8 j = 0;
-
-		if (!devs[i]->name || !devs[i]->modes) {
-			printk(KERN_ERR "padmux: dev name or modes is null\n");
-			continue;
-		}
-		/* check if peripheral exists in active mode */
-		if (pmx->active_mode) {
-			bool found = false;
-			for (j = 0; j < devs[i]->mode_count; j++) {
-				if (devs[i]->modes[j].ids &
-						pmx->active_mode->id) {
-					found = true;
-					break;
-				}
-			}
-			if (found == false) {
-				printk(KERN_ERR "%s device not available in %s"\
-						"mode\n", devs[i]->name,
-						pmx->active_mode->name);
-				continue;
-			}
-		}
-
-		/* enable peripheral */
-		mask = devs[i]->modes[j].mask & pmx->mux_reg.mask;
-		if (devs[i]->enb_on_reset)
-			val &= ~mask;
-		else
-			val |= mask;
-
-		devs[i]->is_active = true;
-	}
-	writel(val, pmx->base + pmx->mux_reg.offset);
-	kfree(pmx);
-
-	/* this will ensure that multiplexing can't be changed now */
-	pmx = (struct pmx *)-1;
-
-	return 0;
-}
-
-/**
- * pmx_register - registers a platform requesting pad mux feature
- * @driver - pointer to driver structure containing driver specific parameters
- *
- * Also this must be called only once. This will allocate memory for pmx
- * structure, will call pmx_mode_set, will call pmx_devs_enable.
- * Returns -ve on Err otherwise 0
- */
-int pmx_register(struct pmx_driver *driver)
-{
-	int ret = 0;
-
-	if (pmx)
-		return -EPERM;
-	if (!driver->base || !driver->devs)
-		return -EFAULT;
-
-	pmx = kzalloc(sizeof(*pmx), GFP_KERNEL);
-	if (!pmx)
-		return -ENOMEM;
-
-	pmx->base = (u32)driver->base;
-	pmx->mode_reg.offset = driver->mode_reg.offset;
-	pmx->mode_reg.mask = driver->mode_reg.mask;
-	pmx->mux_reg.offset = driver->mux_reg.offset;
-	pmx->mux_reg.mask = driver->mux_reg.mask;
-
-	/* choose mode to enable */
-	if (driver->mode) {
-		ret = pmx_mode_set(driver->mode);
-		if (ret)
-			goto pmx_fail;
-	}
-	ret = pmx_devs_enable(driver->devs, driver->devs_count);
-	if (ret)
-		goto pmx_fail;
-
-	return 0;
-
-pmx_fail:
-	return ret;
-}

arch/arm/plat-spear/pl080.c

@@ -0,0 +1,80 @@
+/*
+ * arch/arm/plat-spear/pl080.c
+ *
+ * DMAC pl080 definitions for SPEAr platform
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/amba/pl08x.h>
+#include <linux/amba/bus.h>
+#include <linux/bug.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/spinlock_types.h>
+#include <mach/spear.h>
+#include <mach/misc_regs.h>
+
+static spinlock_t lock = __SPIN_LOCK_UNLOCKED(x);
+
+struct {
+	unsigned char busy;
+	unsigned char val;
+} signals[16] = {{0, 0}, };
+
+int pl080_get_signal(struct pl08x_dma_chan *ch)
+{
+	const struct pl08x_channel_data *cd = ch->cd;
+	unsigned int signal = cd->min_signal, val;
+	unsigned long flags;
+
+	spin_lock_irqsave(&lock, flags);
+
+	/* Return if signal is already acquired by somebody else */
+	if (signals[signal].busy &&
+			(signals[signal].val != cd->muxval)) {
+		spin_unlock_irqrestore(&lock, flags);
+		return -EBUSY;
+	}
+
+	/* If acquiring for the first time, configure it */
+	if (!signals[signal].busy) {
+		val = readl(DMA_CHN_CFG);
+
+		/*
+		 * Each request line has two bits in DMA_CHN_CFG register. To
+		 * goto the bits of current request line, do left shift of
+		 * value by 2 * signal number.
+		 */
+		val &= ~(0x3 << (signal * 2));
+		val |= cd->muxval << (signal * 2);
+		writel(val, DMA_CHN_CFG);
+	}
+
+	signals[signal].busy++;
+	signals[signal].val = cd->muxval;
+	spin_unlock_irqrestore(&lock, flags);
+
+	return signal;
+}
+
+void pl080_put_signal(struct pl08x_dma_chan *ch)
+{
+	const struct pl08x_channel_data *cd = ch->cd;
+	unsigned long flags;
+
+	spin_lock_irqsave(&lock, flags);
+
+	/* if signal is not used */
+	if (!signals[cd->min_signal].busy)
+		BUG();
+
+	signals[cd->min_signal].busy--;
+
+	spin_unlock_irqrestore(&lock, flags);
+}

arch/arm/plat-spear/restart.c

@@ -13,9 +13,10 @@
 #include <linux/io.h>
 #include <asm/system_misc.h>
 #include <asm/hardware/sp810.h>
-#include <mach/hardware.h>
+#include <mach/spear.h>
 #include <mach/generic.h>
 
+#define SPEAR13XX_SYS_SW_RES			(VA_MISC_BASE + 0x204)
 void spear_restart(char mode, const char *cmd)
 {
 	if (mode == 's') {
@@ -23,6 +24,10 @@ void spear_restart(char mode, const char *cmd)
 		soft_restart(0);
 	} else {
 		/* hardware reset, Use on-chip reset capability */
+#ifdef CONFIG_ARCH_SPEAR13XX
+		writel_relaxed(0x01, SPEAR13XX_SYS_SW_RES);
+#else
 		sysctl_soft_reset((void __iomem *)VA_SPEAR_SYS_CTRL_BASE);
+#endif
 	}
 }

arch/arm/plat-spear/time.c

@@ -15,14 +15,15 @@
 #include <linux/err.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/ioport.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
 #include <linux/time.h>
 #include <linux/irq.h>
 #include <asm/mach/time.h>
 #include <mach/generic.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
 
 /*
  * We would use TIMER0 and TIMER1 as clockevent and clocksource.
@@ -175,7 +176,7 @@ static struct irqaction spear_timer_irq = {
 	.handler = spear_timer_interrupt
 };
 
-static void __init spear_clockevent_init(void)
+static void __init spear_clockevent_init(int irq)
 {
 	u32 tick_rate;
 
@@ -195,22 +196,35 @@ static void __init spear_clockevent_init(void)
 
 	clockevents_register_device(&clkevt);
 
-	setup_irq(SPEAR_GPT0_CHAN0_IRQ, &spear_timer_irq);
+	setup_irq(irq, &spear_timer_irq);
 }
 
-void __init spear_setup_timer(void)
+const static struct of_device_id timer_of_match[] __initconst = {
+	{ .compatible = "st,spear-timer", },
+	{ },
+};
+
+void __init spear_setup_of_timer(void)
 {
-	int ret;
+	struct device_node *np;
+	int irq, ret;
+
+	np = of_find_matching_node(NULL, timer_of_match);
+	if (!np) {
+		pr_err("%s: No timer passed via DT\n", __func__);
+		return;
+	}
 
-	if (!request_mem_region(SPEAR_GPT0_BASE, SZ_1K, "gpt0")) {
-		pr_err("%s:cannot get IO addr\n", __func__);
+	irq = irq_of_parse_and_map(np, 0);
+	if (!irq) {
+		pr_err("%s: No irq passed for timer via DT\n", __func__);
 		return;
 	}
 
-	gpt_base = (void __iomem *)ioremap(SPEAR_GPT0_BASE, SZ_1K);
+	gpt_base = of_iomap(np, 0);
 	if (!gpt_base) {
-		pr_err("%s:ioremap failed for gpt\n", __func__);
-		goto err_mem;
+		pr_err("%s: of iomap failed\n", __func__);
+		return;
 	}
 
 	gpt_clk = clk_get_sys("gpt0", NULL);
@@ -219,21 +233,19 @@ void __init spear_setup_timer(void)
 		goto err_iomap;
 	}
 
-	ret = clk_enable(gpt_clk);
+	ret = clk_prepare_enable(gpt_clk);
 	if (ret < 0) {
-		pr_err("%s:couldn't enable gpt clock\n", __func__);
-		goto err_clk;
+		pr_err("%s:couldn't prepare-enable gpt clock\n", __func__);
+		goto err_prepare_enable_clk;
 	}
 
-	spear_clockevent_init();
+	spear_clockevent_init(irq);
 	spear_clocksource_init();
 
 	return;
 
-err_clk:
+err_prepare_enable_clk:
 	clk_put(gpt_clk);
 err_iomap:
 	iounmap(gpt_base);
-err_mem:
-	release_mem_region(SPEAR_GPT0_BASE, SZ_1K);
 }

drivers/clk/Kconfig

@@ -12,6 +12,7 @@ config HAVE_MACH_CLKDEV
 config COMMON_CLK
 	bool
 	select HAVE_CLK_PREPARE
+	select CLKDEV_LOOKUP
 	---help---
 	  The common clock framework is a single definition of struct
 	  clk, useful across many platforms, as well as an
@@ -22,17 +23,6 @@ config COMMON_CLK
 menu "Common Clock Framework"
 	depends on COMMON_CLK
 
-config COMMON_CLK_DISABLE_UNUSED
-	bool "Disabled unused clocks at boot"
-	depends on COMMON_CLK
-	---help---
-	  Traverses the entire clock tree and disables any clocks that are
-	  enabled in hardware but have not been enabled by any device drivers.
-	  This saves power and keeps the software model of the clock in line
-	  with reality.
-
-	  If in doubt, say "N".
-
 config COMMON_CLK_DEBUG
 	bool "DebugFS representation of clock tree"
 	depends on COMMON_CLK

drivers/clk/Makefile

@@ -1,4 +1,7 @@
 
 obj-$(CONFIG_CLKDEV_LOOKUP)	+= clkdev.o
 obj-$(CONFIG_COMMON_CLK)	+= clk.o clk-fixed-rate.o clk-gate.o \
-				   clk-mux.o clk-divider.o
+				   clk-mux.o clk-divider.o clk-fixed-factor.o
+
+# SoCs specific
+obj-$(CONFIG_PLAT_SPEAR)	+= spear/

drivers/clk/clk-divider.c

@@ -45,7 +45,6 @@ static unsigned long clk_divider_recalc_rate(struct clk_hw *hw,
 
 	return parent_rate / div;
 }
-EXPORT_SYMBOL_GPL(clk_divider_recalc_rate);
 
 /*
  * The reverse of DIV_ROUND_UP: The maximum number which
@@ -68,8 +67,8 @@ static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate,
 	if (divider->flags & CLK_DIVIDER_ONE_BASED)
 		maxdiv--;
 
-	if (!best_parent_rate) {
-		parent_rate = __clk_get_rate(__clk_get_parent(hw->clk));
+	if (!(__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT)) {
+		parent_rate = *best_parent_rate;
 		bestdiv = DIV_ROUND_UP(parent_rate, rate);
 		bestdiv = bestdiv == 0 ? 1 : bestdiv;
 		bestdiv = bestdiv > maxdiv ? maxdiv : bestdiv;
@@ -109,24 +108,18 @@ static long clk_divider_round_rate(struct clk_hw *hw, unsigned long rate,
 	int div;
 	div = clk_divider_bestdiv(hw, rate, prate);
 
-	if (prate)
-		return *prate / div;
-	else {
-		unsigned long r;
-		r = __clk_get_rate(__clk_get_parent(hw->clk));
-		return r / div;
-	}
+	return *prate / div;
 }
-EXPORT_SYMBOL_GPL(clk_divider_round_rate);
 
-static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate)
+static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long parent_rate)
 {
 	struct clk_divider *divider = to_clk_divider(hw);
 	unsigned int div;
 	unsigned long flags = 0;
 	u32 val;
 
-	div = __clk_get_rate(__clk_get_parent(hw->clk)) / rate;
+	div = parent_rate / rate;
 
 	if (!(divider->flags & CLK_DIVIDER_ONE_BASED))
 		div--;
@@ -147,15 +140,26 @@ static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate)
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(clk_divider_set_rate);
 
-struct clk_ops clk_divider_ops = {
+const struct clk_ops clk_divider_ops = {
 	.recalc_rate = clk_divider_recalc_rate,
 	.round_rate = clk_divider_round_rate,
 	.set_rate = clk_divider_set_rate,
 };
 EXPORT_SYMBOL_GPL(clk_divider_ops);
 
+/**
+ * clk_register_divider - register a divider clock with the clock framework
+ * @dev: device registering this clock
+ * @name: name of this clock
+ * @parent_name: name of clock's parent
+ * @flags: framework-specific flags
+ * @reg: register address to adjust divider
+ * @shift: number of bits to shift the bitfield
+ * @width: width of the bitfield
+ * @clk_divider_flags: divider-specific flags for this clock
+ * @lock: shared register lock for this clock
+ */
 struct clk *clk_register_divider(struct device *dev, const char *name,
 		const char *parent_name, unsigned long flags,
 		void __iomem *reg, u8 shift, u8 width,
@@ -163,38 +167,34 @@ struct clk *clk_register_divider(struct device *dev, const char *name,
 {
 	struct clk_divider *div;
 	struct clk *clk;
+	struct clk_init_data init;
 
+	/* allocate the divider */
 	div = kzalloc(sizeof(struct clk_divider), GFP_KERNEL);
-
 	if (!div) {
 		pr_err("%s: could not allocate divider clk\n", __func__);
-		return NULL;
+		return ERR_PTR(-ENOMEM);
 	}
 
+	init.name = name;
+	init.ops = &clk_divider_ops;
+	init.flags = flags;
+	init.parent_names = (parent_name ? &parent_name: NULL);
+	init.num_parents = (parent_name ? 1 : 0);
+
 	/* struct clk_divider assignments */
 	div->reg = reg;
 	div->shift = shift;
 	div->width = width;
 	div->flags = clk_divider_flags;
 	div->lock = lock;
+	div->hw.init = &init;
 
-	if (parent_name) {
-		div->parent[0] = kstrdup(parent_name, GFP_KERNEL);
-		if (!div->parent[0])
-			goto out;
-	}
-
-	clk = clk_register(dev, name,
-			&clk_divider_ops, &div->hw,
-			div->parent,
-			(parent_name ? 1 : 0),
-			flags);
-	if (clk)
-		return clk;
+	/* register the clock */
+	clk = clk_register(dev, &div->hw);
 
-out:
-	kfree(div->parent[0]);
-	kfree(div);
+	if (IS_ERR(clk))
+		kfree(div);
 
-	return NULL;
+	return clk;
 }

drivers/clk/clk-fixed-factor.c

@@ -0,0 +1,95 @@
+/*
+ * Copyright (C) 2011 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Standard functionality for the common clock API.
+ */
+#include <linux/module.h>
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+
+/*
+ * DOC: basic fixed multiplier and divider clock that cannot gate
+ *
+ * Traits of this clock:
+ * prepare - clk_prepare only ensures that parents are prepared
+ * enable - clk_enable only ensures that parents are enabled
+ * rate - rate is fixed.  clk->rate = parent->rate / div * mult
+ * parent - fixed parent.  No clk_set_parent support
+ */
+
+#define to_clk_fixed_factor(_hw) container_of(_hw, struct clk_fixed_factor, hw)
+
+static unsigned long clk_factor_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct clk_fixed_factor *fix = to_clk_fixed_factor(hw);
+
+	return parent_rate * fix->mult / fix->div;
+}
+
+static long clk_factor_round_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long *prate)
+{
+	struct clk_fixed_factor *fix = to_clk_fixed_factor(hw);
+
+	if (__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT) {
+		unsigned long best_parent;
+
+		best_parent = (rate / fix->mult) * fix->div;
+		*prate = __clk_round_rate(__clk_get_parent(hw->clk),
+				best_parent);
+	}
+
+	return (*prate / fix->div) * fix->mult;
+}
+
+static int clk_factor_set_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long parent_rate)
+{
+	return 0;
+}
+
+struct clk_ops clk_fixed_factor_ops = {
+	.round_rate = clk_factor_round_rate,
+	.set_rate = clk_factor_set_rate,
+	.recalc_rate = clk_factor_recalc_rate,
+};
+EXPORT_SYMBOL_GPL(clk_fixed_factor_ops);
+
+struct clk *clk_register_fixed_factor(struct device *dev, const char *name,
+		const char *parent_name, unsigned long flags,
+		unsigned int mult, unsigned int div)
+{
+	struct clk_fixed_factor *fix;
+	struct clk_init_data init;
+	struct clk *clk;
+
+	fix = kmalloc(sizeof(*fix), GFP_KERNEL);
+	if (!fix) {
+		pr_err("%s: could not allocate fixed factor clk\n", __func__);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	/* struct clk_fixed_factor assignments */
+	fix->mult = mult;
+	fix->div = div;
+	fix->hw.init = &init;
+
+	init.name = name;
+	init.ops = &clk_fixed_factor_ops;
+	init.flags = flags;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	clk = clk_register(dev, &fix->hw);
+
+	if (IS_ERR(clk))
+		kfree(fix);
+
+	return clk;
+}

drivers/clk/clk-fixed-rate.c

@@ -32,51 +32,50 @@ static unsigned long clk_fixed_rate_recalc_rate(struct clk_hw *hw,
 {
 	return to_clk_fixed_rate(hw)->fixed_rate;
 }
-EXPORT_SYMBOL_GPL(clk_fixed_rate_recalc_rate);
 
-struct clk_ops clk_fixed_rate_ops = {
+const struct clk_ops clk_fixed_rate_ops = {
 	.recalc_rate = clk_fixed_rate_recalc_rate,
 };
 EXPORT_SYMBOL_GPL(clk_fixed_rate_ops);
 
+/**
+ * clk_register_fixed_rate - register fixed-rate clock with the clock framework
+ * @dev: device that is registering this clock
+ * @name: name of this clock
+ * @parent_name: name of clock's parent
+ * @flags: framework-specific flags
+ * @fixed_rate: non-adjustable clock rate
+ */
 struct clk *clk_register_fixed_rate(struct device *dev, const char *name,
 		const char *parent_name, unsigned long flags,
 		unsigned long fixed_rate)
 {
 	struct clk_fixed_rate *fixed;
-	char **parent_names = NULL;
-	u8 len;
+	struct clk *clk;
+	struct clk_init_data init;
 
+	/* allocate fixed-rate clock */
 	fixed = kzalloc(sizeof(struct clk_fixed_rate), GFP_KERNEL);
-
 	if (!fixed) {
 		pr_err("%s: could not allocate fixed clk\n", __func__);
 		return ERR_PTR(-ENOMEM);
 	}
 
+	init.name = name;
+	init.ops = &clk_fixed_rate_ops;
+	init.flags = flags;
+	init.parent_names = (parent_name ? &parent_name: NULL);
+	init.num_parents = (parent_name ? 1 : 0);
+
 	/* struct clk_fixed_rate assignments */
 	fixed->fixed_rate = fixed_rate;
+	fixed->hw.init = &init;
 
-	if (parent_name) {
-		parent_names = kmalloc(sizeof(char *), GFP_KERNEL);
-
-		if (! parent_names)
-			goto out;
+	/* register the clock */
+	clk = clk_register(dev, &fixed->hw);
 
-		len = sizeof(char) * strlen(parent_name);
-
-		parent_names[0] = kmalloc(len, GFP_KERNEL);
-
-		if (!parent_names[0])
-			goto out;
-
-		strncpy(parent_names[0], parent_name, len);
-	}
+	if (IS_ERR(clk))
+		kfree(fixed);
 
-out:
-	return clk_register(dev, name,
-			&clk_fixed_rate_ops, &fixed->hw,
-			parent_names,
-			(parent_name ? 1 : 0),
-			flags);
+	return clk;
 }