net: hns3: add ethtool -p support for fiber port

Add led location support for fiber port. The led will keep blinking
when locating.

Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/hisilicon/hns3/hnae3.h

@@ -405,6 +405,8 @@ struct hnae3_ae_ops {
 	int (*set_channels)(struct hnae3_handle *handle, u32 new_tqps_num);
 	void (*get_flowctrl_adv)(struct hnae3_handle *handle,
 				 u32 *flowctrl_adv);
+	int (*set_led_id)(struct hnae3_handle *handle,
+			  enum ethtool_phys_id_state status);
 };
 
 struct hnae3_dcb_ops {

drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c

@@ -1084,6 +1084,17 @@ static void hns3_get_regs(struct net_device *netdev,
 	h->ae_algo->ops->get_regs(h, &cmd->version, data);
 }
 
+static int hns3_set_phys_id(struct net_device *netdev,
+			    enum ethtool_phys_id_state state)
+{
+	struct hnae3_handle *h = hns3_get_handle(netdev);
+
+	if (!h->ae_algo || !h->ae_algo->ops || !h->ae_algo->ops->set_led_id)
+		return -EOPNOTSUPP;
+
+	return h->ae_algo->ops->set_led_id(h, state);
+}
+
 static const struct ethtool_ops hns3vf_ethtool_ops = {
 	.get_drvinfo = hns3_get_drvinfo,
 	.get_ringparam = hns3_get_ringparam,
@@ -1126,6 +1137,7 @@ static const struct ethtool_ops hns3_ethtool_ops = {
 	.set_coalesce = hns3_set_coalesce,
 	.get_regs_len = hns3_get_regs_len,
 	.get_regs = hns3_get_regs,
+	.set_phys_id = hns3_set_phys_id,
 };
 
 void hns3_ethtool_set_ops(struct net_device *netdev)

drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h

@@ -227,6 +227,9 @@ enum hclge_opcode_type {
 
 	/* Mailbox cmd */
 	HCLGEVF_OPC_MBX_PF_TO_VF	= 0x2000,
+
+	/* Led command */
+	HCLGE_OPC_LED_STATUS_CFG	= 0xB000,
 };
 
 #define HCLGE_TQP_REG_OFFSET		0x80000
@@ -807,6 +810,23 @@ struct hclge_reset_cmd {
 #define HCLGE_NIC_CMQ_DESC_NUM		1024
 #define HCLGE_NIC_CMQ_DESC_NUM_S	3
 
+#define HCLGE_LED_PORT_SPEED_STATE_S	0
+#define HCLGE_LED_PORT_SPEED_STATE_M	GENMASK(5, 0)
+#define HCLGE_LED_ACTIVITY_STATE_S	0
+#define HCLGE_LED_ACTIVITY_STATE_M	GENMASK(1, 0)
+#define HCLGE_LED_LINK_STATE_S		0
+#define HCLGE_LED_LINK_STATE_M		GENMASK(1, 0)
+#define HCLGE_LED_LOCATE_STATE_S	0
+#define HCLGE_LED_LOCATE_STATE_M	GENMASK(1, 0)
+
+struct hclge_set_led_state_cmd {
+	u8 port_speed_led_config;
+	u8 link_led_config;
+	u8 activity_led_config;
+	u8 locate_led_config;
+	u8 rsv[20];
+};
+
 int hclge_cmd_init(struct hclge_dev *hdev);
 static inline void hclge_write_reg(void __iomem *base, u32 reg, u32 value)
 {

drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c

@@ -5819,6 +5819,75 @@ static void hclge_get_regs(struct hnae3_handle *handle, u32 *version,
 			"Get 64 bit register failed, ret = %d.\n", ret);
 }
 
+static int hclge_set_led_status_sfp(struct hclge_dev *hdev, u8 speed_led_status,
+				    u8 act_led_status, u8 link_led_status,
+				    u8 locate_led_status)
+{
+	struct hclge_set_led_state_cmd *req;
+	struct hclge_desc desc;
+	int ret;
+
+	hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_LED_STATUS_CFG, false);
+
+	req = (struct hclge_set_led_state_cmd *)desc.data;
+	hnae_set_field(req->port_speed_led_config, HCLGE_LED_PORT_SPEED_STATE_M,
+		       HCLGE_LED_PORT_SPEED_STATE_S, speed_led_status);
+	hnae_set_field(req->link_led_config, HCLGE_LED_ACTIVITY_STATE_M,
+		       HCLGE_LED_ACTIVITY_STATE_S, act_led_status);
+	hnae_set_field(req->activity_led_config, HCLGE_LED_LINK_STATE_M,
+		       HCLGE_LED_LINK_STATE_S, link_led_status);
+	hnae_set_field(req->locate_led_config, HCLGE_LED_LOCATE_STATE_M,
+		       HCLGE_LED_LOCATE_STATE_S, locate_led_status);
+
+	ret = hclge_cmd_send(&hdev->hw, &desc, 1);
+	if (ret)
+		dev_err(&hdev->pdev->dev,
+			"Send set led state cmd error, ret =%d\n", ret);
+
+	return ret;
+}
+
+enum hclge_led_status {
+	HCLGE_LED_OFF,
+	HCLGE_LED_ON,
+	HCLGE_LED_NO_CHANGE = 0xFF,
+};
+
+static int hclge_set_led_id(struct hnae3_handle *handle,
+			    enum ethtool_phys_id_state status)
+{
+#define BLINK_FREQUENCY		2
+	struct hclge_vport *vport = hclge_get_vport(handle);
+	struct hclge_dev *hdev = vport->back;
+	struct phy_device *phydev = hdev->hw.mac.phydev;
+	int ret = 0;
+
+	if (phydev || hdev->hw.mac.media_type != HNAE3_MEDIA_TYPE_FIBER)
+		return -EOPNOTSUPP;
+
+	switch (status) {
+	case ETHTOOL_ID_ACTIVE:
+		ret = hclge_set_led_status_sfp(hdev,
+					       HCLGE_LED_NO_CHANGE,
+					       HCLGE_LED_NO_CHANGE,
+					       HCLGE_LED_NO_CHANGE,
+					       HCLGE_LED_ON);
+		break;
+	case ETHTOOL_ID_INACTIVE:
+		ret = hclge_set_led_status_sfp(hdev,
+					       HCLGE_LED_NO_CHANGE,
+					       HCLGE_LED_NO_CHANGE,
+					       HCLGE_LED_NO_CHANGE,
+					       HCLGE_LED_OFF);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
 static const struct hnae3_ae_ops hclge_ops = {
 	.init_ae_dev = hclge_init_ae_dev,
 	.uninit_ae_dev = hclge_uninit_ae_dev,
@@ -5872,6 +5941,7 @@ static const struct hnae3_ae_ops hclge_ops = {
 	.get_flowctrl_adv = hclge_get_flowctrl_adv,
 	.get_regs_len = hclge_get_regs_len,
 	.get_regs = hclge_get_regs,
+	.set_led_id = hclge_set_led_id,
 };
 
 static struct hnae3_ae_algo ae_algo = {