drm/i915: Replace a few for_each_pipe(i) by for_each_pipe(pipe)

Consistency throughout the code base is good and remove some room for
mistakes (as explained in the "drm/i915: Use a pipe variable to cycle
through the pipes" commit)

So, let's replace the for_each_pipe(i) occurences by for_each_pipe(pipe)
when it's reasonable and practical to do so (eg. when there isn't another
pipe variable already).

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/i915_debugfs.c

@@ -614,16 +614,16 @@ static int i915_interrupt_info(struct seq_file *m, void *data)
 				   i, I915_READ(GEN8_GT_IER(i)));
 		}
 
-		for_each_pipe(i) {
+		for_each_pipe(pipe) {
 			seq_printf(m, "Pipe %c IMR:\t%08x\n",
-				   pipe_name(i),
-				   I915_READ(GEN8_DE_PIPE_IMR(i)));
+				   pipe_name(pipe),
+				   I915_READ(GEN8_DE_PIPE_IMR(pipe)));
 			seq_printf(m, "Pipe %c IIR:\t%08x\n",
-				   pipe_name(i),
-				   I915_READ(GEN8_DE_PIPE_IIR(i)));
+				   pipe_name(pipe),
+				   I915_READ(GEN8_DE_PIPE_IIR(pipe)));
 			seq_printf(m, "Pipe %c IER:\t%08x\n",
-				   pipe_name(i),
-				   I915_READ(GEN8_DE_PIPE_IER(i)));
+				   pipe_name(pipe),
+				   I915_READ(GEN8_DE_PIPE_IER(pipe)));
 		}
 
 		seq_printf(m, "Display Engine port interrupt mask:\t%08x\n",

drivers/gpu/drm/i915/i915_irq.c

@@ -1867,7 +1867,7 @@ static void ilk_display_irq_handler(struct drm_device *dev, u32 de_iir)
 static void ivb_display_irq_handler(struct drm_device *dev, u32 de_iir)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	enum pipe i;
+	enum pipe pipe;
 
 	if (de_iir & DE_ERR_INT_IVB)
 		ivb_err_int_handler(dev);
@@ -1878,14 +1878,14 @@ static void ivb_display_irq_handler(struct drm_device *dev, u32 de_iir)
 	if (de_iir & DE_GSE_IVB)
 		intel_opregion_asle_intr(dev);
 
-	for_each_pipe(i) {
-		if (de_iir & (DE_PIPE_VBLANK_IVB(i)))
-			drm_handle_vblank(dev, i);
+	for_each_pipe(pipe) {
+		if (de_iir & (DE_PIPE_VBLANK_IVB(pipe)))
+			drm_handle_vblank(dev, pipe);
 
 		/* plane/pipes map 1:1 on ilk+ */
-		if (de_iir & DE_PLANE_FLIP_DONE_IVB(i)) {
-			intel_prepare_page_flip(dev, i);
-			intel_finish_page_flip_plane(dev, i);
+		if (de_iir & DE_PLANE_FLIP_DONE_IVB(pipe)) {
+			intel_prepare_page_flip(dev, pipe);
+			intel_finish_page_flip_plane(dev, pipe);
 		}
 	}
 

drivers/gpu/drm/i915/intel_pm.c

@@ -4792,7 +4792,7 @@ static void lpt_suspend_hw(struct drm_device *dev)
 static void gen8_init_clock_gating(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	enum pipe i;
+	enum pipe pipe;
 
 	I915_WRITE(WM3_LP_ILK, 0);
 	I915_WRITE(WM2_LP_ILK, 0);
@@ -4837,9 +4837,9 @@ static void gen8_init_clock_gating(struct drm_device *dev)
 		   I915_READ(CHICKEN_PAR1_1) | DPA_MASK_VBLANK_SRD);
 
 	/* WaPsrDPRSUnmaskVBlankInSRD:bdw */
-	for_each_pipe(i) {
-		I915_WRITE(CHICKEN_PIPESL_1(i),
-			   I915_READ(CHICKEN_PIPESL_1(i) |
+	for_each_pipe(pipe) {
+		I915_WRITE(CHICKEN_PIPESL_1(pipe),
+			   I915_READ(CHICKEN_PIPESL_1(pipe) |
 				     DPRS_MASK_VBLANK_SRD));
 	}
 
@@ -5310,7 +5310,7 @@ static void hsw_power_well_post_enable(struct drm_i915_private *dev_priv)
 static void hsw_power_well_post_disable(struct drm_i915_private *dev_priv)
 {
 	struct drm_device *dev = dev_priv->dev;
-	enum pipe p;
+	enum pipe pipe;
 	unsigned long irqflags;
 
 	/*
@@ -5321,9 +5321,9 @@ static void hsw_power_well_post_disable(struct drm_i915_private *dev_priv)
 	 * FIXME: Should we do this in general in drm_vblank_post_modeset?
 	 */
 	spin_lock_irqsave(&dev->vbl_lock, irqflags);
-	for_each_pipe(p)
-		if (p != PIPE_A)
-			dev->vblank[p].last = 0;
+	for_each_pipe(pipe)
+		if (pipe != PIPE_A)
+			dev->vblank[pipe].last = 0;
 	spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
 }