switchtec: Add "running" status flag to fw partition info ioctl

This flag lets userspace know which firmware partitions are currently in
use as opposed to just active.  "Active" means they will be in use for the
next reboot, whereas "running" means they are currently in use.

If an old kernel is in use, or the firmware doesn't support these fields,
the new flag will not be set in the output.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kurt Schwemmer <kurt.schwemmer@microsemi.com>

drivers/pci/switch/switchtec.c

@@ -120,6 +120,13 @@ struct sw_event_regs {
 	u32 reserved16[4];
 } __packed;
 
+enum {
+	SWITCHTEC_CFG0_RUNNING = 0x04,
+	SWITCHTEC_CFG1_RUNNING = 0x05,
+	SWITCHTEC_IMG0_RUNNING = 0x03,
+	SWITCHTEC_IMG1_RUNNING = 0x07,
+};
+
 struct sys_info_regs {
 	u32 device_id;
 	u32 device_version;
@@ -129,7 +136,9 @@ struct sys_info_regs {
 	u32 table_format_version;
 	u32 partition_id;
 	u32 cfg_file_fmt_version;
-	u32 reserved2[58];
+	u16 cfg_running;
+	u16 img_running;
+	u32 reserved2[57];
 	char vendor_id[8];
 	char product_id[16];
 	char product_revision[4];
@@ -807,6 +816,7 @@ static int ioctl_flash_part_info(struct switchtec_dev *stdev,
 {
 	struct switchtec_ioctl_flash_part_info info = {0};
 	struct flash_info_regs __iomem *fi = stdev->mmio_flash_info;
+	struct sys_info_regs __iomem *si = stdev->mmio_sys_info;
 	u32 active_addr = -1;
 
 	if (copy_from_user(&info, uinfo, sizeof(info)))
@@ -816,18 +826,26 @@ static int ioctl_flash_part_info(struct switchtec_dev *stdev,
 	case SWITCHTEC_IOCTL_PART_CFG0:
 		active_addr = ioread32(&fi->active_cfg);
 		set_fw_info_part(&info, &fi->cfg0);
+		if (ioread16(&si->cfg_running) == SWITCHTEC_CFG0_RUNNING)
+			info.active |= SWITCHTEC_IOCTL_PART_RUNNING;
 		break;
 	case SWITCHTEC_IOCTL_PART_CFG1:
 		active_addr = ioread32(&fi->active_cfg);
 		set_fw_info_part(&info, &fi->cfg1);
+		if (ioread16(&si->cfg_running) == SWITCHTEC_CFG1_RUNNING)
+			info.active |= SWITCHTEC_IOCTL_PART_RUNNING;
 		break;
 	case SWITCHTEC_IOCTL_PART_IMG0:
 		active_addr = ioread32(&fi->active_img);
 		set_fw_info_part(&info, &fi->img0);
+		if (ioread16(&si->img_running) == SWITCHTEC_IMG0_RUNNING)
+			info.active |= SWITCHTEC_IOCTL_PART_RUNNING;
 		break;
 	case SWITCHTEC_IOCTL_PART_IMG1:
 		active_addr = ioread32(&fi->active_img);
 		set_fw_info_part(&info, &fi->img1);
+		if (ioread16(&si->img_running) == SWITCHTEC_IMG1_RUNNING)
+			info.active |= SWITCHTEC_IOCTL_PART_RUNNING;
 		break;
 	case SWITCHTEC_IOCTL_PART_NVLOG:
 		set_fw_info_part(&info, &fi->nvlog);
@@ -861,7 +879,7 @@ static int ioctl_flash_part_info(struct switchtec_dev *stdev,
 	}
 
 	if (info.address == active_addr)
-		info.active = 1;
+		info.active |= SWITCHTEC_IOCTL_PART_ACTIVE;
 
 	if (copy_to_user(uinfo, &info, sizeof(info)))
 		return -EFAULT;

include/uapi/linux/switchtec_ioctl.h

@@ -39,6 +39,9 @@ struct switchtec_ioctl_flash_info {
 	__u32 padding;
 };
 
+#define SWITCHTEC_IOCTL_PART_ACTIVE  1
+#define SWITCHTEC_IOCTL_PART_RUNNING 2
+
 struct switchtec_ioctl_flash_part_info {
 	__u32 flash_partition;
 	__u32 address;