Merge tag 'mmc-updates-for-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

Pull MMC update from Chris Ball:
 "MMC highlights for 3.16:

  Core:
   - support HS400 mode of eMMC 5.0, via DT bindings mmc-hs400-1_{2,8}v
   - if card init at 3.3v doesn't work, try 1.8v and 1.2v too

  Drivers:
   - moxart: New driver for MOXA ART SoCs
   - rtsx_usb_sdmmc: New driver for Realtek USB card readers
   - sdhci: Large rework around IRQ/regulator handling, remove card_tasklet
   - sdhci-pci-o2micro: Add SeaBird SeaEagle SD3 support
   - sunxi: New driver for Allwinner sunxi SoCs
   - usdhi6rol0: New driver for Renesas SD/SDIO controller"

* tag 'mmc-updates-for-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (95 commits)
  mmc: sdhci-s3c: use mmc_of_parse and remove the card_tasklet
  mmc: add a driver for the Renesas usdhi6rol0 SD/SDIO host controller
  mmc: sdhci-of-esdhc: Fixup compile error
  mmc: tegra: fix reporting of base clock frequency
  mmc: tegra: disable UHS modes
  mmc: sdhci-dove: use mmc_of_parse() and remove card_tasklet CD handler
  MAINTAINERS: mmc: Add path to git tree
  mmc: dove: fix missing MACH_DOVE dependency
  mmc: sdhci: SD tuning is broken for some controllers
  mmc: sdhci-esdhc-imx: fix mmc ddr mode regression issue
  mmc: sdhci-pci-o2micro: Add SeaBird SeaEagle SD3 support
  mmc: omap_hsmmc: split omap-dma header file
  mmc: omap_hsmmc: fix cmd23 multiblock read/write
  mmc: omap_hsmmc: use devm_ioremap_resource
  mmc: omap_hsmmc: use devm_request_threaded_irq
  mmc: omap_hsmmc: use devm_request_irq
  mmc: omap_hsmmc: use devm_clk_get
  mmc: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs
  mmc: wmt-sdmmc: Use GFP_KERNEL instead of hard-coded value
  mmc: omap: Use DIV_ROUND_UP instead of open coded
  ...

Documentation/devicetree/bindings/mmc/mmc.txt

@@ -38,6 +38,8 @@ Optional properties:
 - mmc-highspeed-ddr-1_2v: eMMC high-speed DDR mode(1.2V I/O) is supported
 - mmc-hs200-1_8v: eMMC HS200 mode(1.8V I/O) is supported
 - mmc-hs200-1_2v: eMMC HS200 mode(1.2V I/O) is supported
+- mmc-hs400-1_8v: eMMC HS400 mode(1.8V I/O) is supported
+- mmc-hs400-1_2v: eMMC HS400 mode(1.2V I/O) is supported
 
 *NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line
 polarity properties, we have to fix the meaning of the "normal" and "inverted"

Documentation/devicetree/bindings/mmc/moxa,moxart-mmc.txt

@@ -0,0 +1,30 @@
+MOXA ART MMC Host Controller Interface
+
+  Inherits from mmc binding[1].
+
+  [1] Documentation/devicetree/bindings/mmc/mmc.txt
+
+Required properties:
+
+- compatible :	Must be "moxa,moxart-mmc" or "faraday,ftsdc010"
+- reg :		Should contain registers location and length
+- interrupts :	Should contain the interrupt number
+- clocks :	Should contain phandle for the clock feeding the MMC controller
+
+Optional properties:
+
+- dmas :	Should contain two DMA channels, line request number must be 5 for
+		both channels
+- dma-names :	Must be "tx", "rx"
+
+Example:
+
+	mmc: mmc@98e00000 {
+		compatible = "moxa,moxart-mmc";
+		reg = <0x98e00000 0x5C>;
+		interrupts = <5 0>;
+		clocks = <&clk_apb>;
+		dmas =  <&dma 5>,
+			<&dma 5>;
+		dma-names = "tx", "rx";
+	};

Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt

@@ -69,10 +69,6 @@ Optional properties:
 
 * supports-highspeed: Enables support for high speed cards (up to 50MHz)
 
-* caps2-mmc-hs200-1_8v: Supports mmc HS200 SDR 1.8V mode
-
-* caps2-mmc-hs200-1_2v: Supports mmc HS200 SDR 1.2V mode
-
 * broken-cd: as documented in mmc core bindings.
 
 * vmmc-supply: The phandle to the regulator to use for vmmc.  If this is
@@ -103,7 +99,6 @@ board specific portions as listed below.
 		clock-freq-min-max = <400000 200000000>;
 		num-slots = <1>;
 		supports-highspeed;
-		caps2-mmc-hs200-1_8v;
 		broken-cd;
 		fifo-depth = <0x80>;
 		card-detect-delay = <200>;

Documentation/devicetree/bindings/mmc/usdhi6rol0.txt

@@ -0,0 +1,33 @@
+* Renesas usdhi6rol0 SD/SDIO host controller
+
+Required properties:
+
+- compatible:	must be
+		"renesas,usdhi6rol0"
+- interrupts:	3 interrupts, named "card detect", "data" and "SDIO" must be
+		specified
+- clocks:	a clock binding for the IMCLK input
+
+Optional properties:
+
+- vmmc-supply:	a phandle of a regulator, supplying Vcc to the card
+- vqmmc-supply:	a phandle of a regulator, supplying VccQ to the card
+
+Additionally any standard mmc bindings from mmc.txt can be used.
+
+Example:
+
+sd0: sd@ab000000 {
+	compatible = "renesas,usdhi6rol0";
+	reg = <0xab000000 0x200>;
+	interrupts = <0 23 0x4
+		      0 24 0x4
+		      0 25 0x4>;
+	interrupt-names = "card detect", "data", "SDIO";
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	cap-power-off-card;
+	clocks = <&imclk>;
+	vmmc-supply = <&vcc_sd0>;
+	vqmmc-supply = <&vccq_sd0>;
+};

MAINTAINERS

@@ -5974,6 +5974,7 @@ M:	Chris Ball <chris@printf.net>
 M:	Ulf Hansson <ulf.hansson@linaro.org>
 L:	linux-mmc@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc.git
+T:	git git://git.linaro.org/people/ulf.hansson/mmc.git
 S:	Maintained
 F:	drivers/mmc/
 F:	include/linux/mmc/
@@ -9103,7 +9104,7 @@ F:	include/linux/toshiba.h
 F:	include/uapi/linux/toshiba.h
 
 TMIO MMC DRIVER
-M:	Ian Molton <ian@mnementh.co.uk>
+M:	Ian Molton <ian.molton@codethink.co.uk>
 L:	linux-mmc@vger.kernel.org
 S:	Maintained
 F:	drivers/mmc/host/tmio_mmc*

drivers/mmc/core/bus.c

@@ -341,16 +341,17 @@ int mmc_add_card(struct mmc_card *card)
 	if (mmc_host_is_spi(card->host)) {
 		pr_info("%s: new %s%s%s card on SPI\n",
 			mmc_hostname(card->host),
-			mmc_card_highspeed(card) ? "high speed " : "",
-			mmc_card_ddr_mode(card) ? "DDR " : "",
+			mmc_card_hs(card) ? "high speed " : "",
+			mmc_card_ddr52(card) ? "DDR " : "",
 			type);
 	} else {
 		pr_info("%s: new %s%s%s%s%s card at address %04x\n",
 			mmc_hostname(card->host),
 			mmc_card_uhs(card) ? "ultra high speed " :
-			(mmc_card_highspeed(card) ? "high speed " : ""),
+			(mmc_card_hs(card) ? "high speed " : ""),
+			mmc_card_hs400(card) ? "HS400 " :
 			(mmc_card_hs200(card) ? "HS200 " : ""),
-			mmc_card_ddr_mode(card) ? "DDR " : "",
+			mmc_card_ddr52(card) ? "DDR " : "",
 			uhs_bus_speed_mode, type, card->rca);
 	}
 

drivers/mmc/core/core.c

@@ -800,6 +800,10 @@ void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card)
 			data->timeout_ns = limit_us * 1000;
 			data->timeout_clks = 0;
 		}
+
+		/* assign limit value if invalid */
+		if (timeout_us == 0)
+			data->timeout_ns = limit_us * 1000;
 	}
 
 	/*
@@ -1310,31 +1314,38 @@ int mmc_regulator_set_ocr(struct mmc_host *mmc,
 }
 EXPORT_SYMBOL_GPL(mmc_regulator_set_ocr);
 
+#endif /* CONFIG_REGULATOR */
+
 int mmc_regulator_get_supply(struct mmc_host *mmc)
 {
 	struct device *dev = mmc_dev(mmc);
-	struct regulator *supply;
 	int ret;
 
-	supply = devm_regulator_get(dev, "vmmc");
-	mmc->supply.vmmc = supply;
+	mmc->supply.vmmc = devm_regulator_get_optional(dev, "vmmc");
 	mmc->supply.vqmmc = devm_regulator_get_optional(dev, "vqmmc");
 
-	if (IS_ERR(supply))
-		return PTR_ERR(supply);
+	if (IS_ERR(mmc->supply.vmmc)) {
+		if (PTR_ERR(mmc->supply.vmmc) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+		dev_info(dev, "No vmmc regulator found\n");
+	} else {
+		ret = mmc_regulator_get_ocrmask(mmc->supply.vmmc);
+		if (ret > 0)
+			mmc->ocr_avail = ret;
+		else
+			dev_warn(dev, "Failed getting OCR mask: %d\n", ret);
+	}
 
-	ret = mmc_regulator_get_ocrmask(supply);
-	if (ret > 0)
-		mmc->ocr_avail = ret;
-	else
-		dev_warn(mmc_dev(mmc), "Failed getting OCR mask: %d\n", ret);
+	if (IS_ERR(mmc->supply.vqmmc)) {
+		if (PTR_ERR(mmc->supply.vqmmc) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+		dev_info(dev, "No vqmmc regulator found\n");
+	}
 
 	return 0;
 }
 EXPORT_SYMBOL_GPL(mmc_regulator_get_supply);
 
-#endif /* CONFIG_REGULATOR */
-
 /*
  * Mask off any voltages we don't support and select
  * the lowest voltage
@@ -1533,8 +1544,13 @@ void mmc_power_up(struct mmc_host *host, u32 ocr)
 	host->ios.timing = MMC_TIMING_LEGACY;
 	mmc_set_ios(host);
 
-	/* Set signal voltage to 3.3V */
-	__mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330);
+	/* Try to set signal voltage to 3.3V but fall back to 1.8v or 1.2v */
+	if (__mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330) == 0)
+		dev_dbg(mmc_dev(host), "Initial signal voltage of 3.3v\n");
+	else if (__mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180) == 0)
+		dev_dbg(mmc_dev(host), "Initial signal voltage of 1.8v\n");
+	else if (__mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120) == 0)
+		dev_dbg(mmc_dev(host), "Initial signal voltage of 1.2v\n");
 
 	/*
 	 * This delay should be sufficient to allow the power supply
@@ -2183,7 +2199,7 @@ int mmc_set_blocklen(struct mmc_card *card, unsigned int blocklen)
 {
 	struct mmc_command cmd = {0};
 
-	if (mmc_card_blockaddr(card) || mmc_card_ddr_mode(card))
+	if (mmc_card_blockaddr(card) || mmc_card_ddr52(card))
 		return 0;
 
 	cmd.opcode = MMC_SET_BLOCKLEN;
@@ -2263,7 +2279,6 @@ static int mmc_do_hw_reset(struct mmc_host *host, int check)
 		}
 	}
 
-	host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_DDR);
 	if (mmc_host_is_spi(host)) {
 		host->ios.chip_select = MMC_CS_HIGH;
 		host->ios.bus_mode = MMC_BUSMODE_PUSHPULL;
@@ -2403,6 +2418,11 @@ void mmc_rescan(struct work_struct *work)
 		container_of(work, struct mmc_host, detect.work);
 	int i;
 
+	if (host->trigger_card_event && host->ops->card_event) {
+		host->ops->card_event(host);
+		host->trigger_card_event = false;
+	}
+
 	if (host->rescan_disable)
 		return;
 

drivers/mmc/core/debugfs.c

@@ -135,8 +135,14 @@ static int mmc_ios_show(struct seq_file *s, void *data)
 	case MMC_TIMING_UHS_DDR50:
 		str = "sd uhs DDR50";
 		break;
+	case MMC_TIMING_MMC_DDR52:
+		str = "mmc DDR52";
+		break;
 	case MMC_TIMING_MMC_HS200:
-		str = "mmc high-speed SDR200";
+		str = "mmc HS200";
+		break;
+	case MMC_TIMING_MMC_HS400:
+		str = "mmc HS400";
 		break;
 	default:
 		str = "invalid";

drivers/mmc/core/host.c

@@ -447,6 +447,10 @@ int mmc_of_parse(struct mmc_host *host)
 		host->caps2 |= MMC_CAP2_HS200_1_8V_SDR;
 	if (of_find_property(np, "mmc-hs200-1_2v", &len))
 		host->caps2 |= MMC_CAP2_HS200_1_2V_SDR;
+	if (of_find_property(np, "mmc-hs400-1_8v", &len))
+		host->caps2 |= MMC_CAP2_HS400_1_8V | MMC_CAP2_HS200_1_8V_SDR;
+	if (of_find_property(np, "mmc-hs400-1_2v", &len))
+		host->caps2 |= MMC_CAP2_HS400_1_2V | MMC_CAP2_HS200_1_2V_SDR;
 
 	return 0;
 

drivers/mmc/core/mmc.c

@@ -240,31 +240,62 @@ static int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd)
 static void mmc_select_card_type(struct mmc_card *card)
 {
 	struct mmc_host *host = card->host;
-	u8 card_type = card->ext_csd.raw_card_type & EXT_CSD_CARD_TYPE_MASK;
+	u8 card_type = card->ext_csd.raw_card_type;
 	u32 caps = host->caps, caps2 = host->caps2;
-	unsigned int hs_max_dtr = 0;
+	unsigned int hs_max_dtr = 0, hs200_max_dtr = 0;
+	unsigned int avail_type = 0;
 
-	if (card_type & EXT_CSD_CARD_TYPE_26)
+	if (caps & MMC_CAP_MMC_HIGHSPEED &&
+	    card_type & EXT_CSD_CARD_TYPE_HS_26) {
 		hs_max_dtr = MMC_HIGH_26_MAX_DTR;
+		avail_type |= EXT_CSD_CARD_TYPE_HS_26;
+	}
 
 	if (caps & MMC_CAP_MMC_HIGHSPEED &&
-			card_type & EXT_CSD_CARD_TYPE_52)
+	    card_type & EXT_CSD_CARD_TYPE_HS_52) {
 		hs_max_dtr = MMC_HIGH_52_MAX_DTR;
+		avail_type |= EXT_CSD_CARD_TYPE_HS_52;
+	}
+
+	if (caps & MMC_CAP_1_8V_DDR &&
+	    card_type & EXT_CSD_CARD_TYPE_DDR_1_8V) {
+		hs_max_dtr = MMC_HIGH_DDR_MAX_DTR;
+		avail_type |= EXT_CSD_CARD_TYPE_DDR_1_8V;
+	}
 
-	if ((caps & MMC_CAP_1_8V_DDR &&
-			card_type & EXT_CSD_CARD_TYPE_DDR_1_8V) ||
-	    (caps & MMC_CAP_1_2V_DDR &&
-			card_type & EXT_CSD_CARD_TYPE_DDR_1_2V))
+	if (caps & MMC_CAP_1_2V_DDR &&
+	    card_type & EXT_CSD_CARD_TYPE_DDR_1_2V) {
 		hs_max_dtr = MMC_HIGH_DDR_MAX_DTR;
+		avail_type |= EXT_CSD_CARD_TYPE_DDR_1_2V;
+	}
+
+	if (caps2 & MMC_CAP2_HS200_1_8V_SDR &&
+	    card_type & EXT_CSD_CARD_TYPE_HS200_1_8V) {
+		hs200_max_dtr = MMC_HS200_MAX_DTR;
+		avail_type |= EXT_CSD_CARD_TYPE_HS200_1_8V;
+	}
+
+	if (caps2 & MMC_CAP2_HS200_1_2V_SDR &&
+	    card_type & EXT_CSD_CARD_TYPE_HS200_1_2V) {
+		hs200_max_dtr = MMC_HS200_MAX_DTR;
+		avail_type |= EXT_CSD_CARD_TYPE_HS200_1_2V;
+	}
+
+	if (caps2 & MMC_CAP2_HS400_1_8V &&
+	    card_type & EXT_CSD_CARD_TYPE_HS400_1_8V) {
+		hs200_max_dtr = MMC_HS200_MAX_DTR;
+		avail_type |= EXT_CSD_CARD_TYPE_HS400_1_8V;
+	}
 
-	if ((caps2 & MMC_CAP2_HS200_1_8V_SDR &&
-			card_type & EXT_CSD_CARD_TYPE_SDR_1_8V) ||
-	    (caps2 & MMC_CAP2_HS200_1_2V_SDR &&
-			card_type & EXT_CSD_CARD_TYPE_SDR_1_2V))
-		hs_max_dtr = MMC_HS200_MAX_DTR;
+	if (caps2 & MMC_CAP2_HS400_1_2V &&
+	    card_type & EXT_CSD_CARD_TYPE_HS400_1_2V) {
+		hs200_max_dtr = MMC_HS200_MAX_DTR;
+		avail_type |= EXT_CSD_CARD_TYPE_HS400_1_2V;
+	}
 
 	card->ext_csd.hs_max_dtr = hs_max_dtr;
-	card->ext_csd.card_type = card_type;
+	card->ext_csd.hs200_max_dtr = hs200_max_dtr;
+	card->mmc_avail_type = avail_type;
 }
 
 /*
@@ -480,6 +511,8 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
 			ext_csd[EXT_CSD_PWR_CL_DDR_52_195];
 		card->ext_csd.raw_pwr_cl_ddr_52_360 =
 			ext_csd[EXT_CSD_PWR_CL_DDR_52_360];
+		card->ext_csd.raw_pwr_cl_ddr_200_360 =
+			ext_csd[EXT_CSD_PWR_CL_DDR_200_360];
 	}
 
 	if (card->ext_csd.rev >= 5) {
@@ -646,7 +679,10 @@ static int mmc_compare_ext_csds(struct mmc_card *card, unsigned bus_width)
 		(card->ext_csd.raw_pwr_cl_ddr_52_195 ==
 			bw_ext_csd[EXT_CSD_PWR_CL_DDR_52_195]) &&
 		(card->ext_csd.raw_pwr_cl_ddr_52_360 ==
-			bw_ext_csd[EXT_CSD_PWR_CL_DDR_52_360]));
+			bw_ext_csd[EXT_CSD_PWR_CL_DDR_52_360]) &&
+		(card->ext_csd.raw_pwr_cl_ddr_200_360 ==
+			bw_ext_csd[EXT_CSD_PWR_CL_DDR_200_360]));
+
 	if (err)
 		err = -EINVAL;
 
@@ -694,18 +730,10 @@ static struct attribute *mmc_std_attrs[] = {
 	&dev_attr_rel_sectors.attr,
 	NULL,
 };
-
-static struct attribute_group mmc_std_attr_group = {
-	.attrs = mmc_std_attrs,
-};
-
-static const struct attribute_group *mmc_attr_groups[] = {
-	&mmc_std_attr_group,
-	NULL,
-};
+ATTRIBUTE_GROUPS(mmc_std);
 
 static struct device_type mmc_type = {
-	.groups = mmc_attr_groups,
+	.groups = mmc_std_groups,
 };
 
 /*
@@ -714,17 +742,13 @@ static struct device_type mmc_type = {
  * extended CSD register, select it by executing the
  * mmc_switch command.
  */
-static int mmc_select_powerclass(struct mmc_card *card,
-		unsigned int bus_width)
+static int __mmc_select_powerclass(struct mmc_card *card,
+				   unsigned int bus_width)
 {
-	int err = 0;
+	struct mmc_host *host = card->host;
+	struct mmc_ext_csd *ext_csd = &card->ext_csd;
 	unsigned int pwrclass_val = 0;
-	struct mmc_host *host;
-
-	BUG_ON(!card);
-
-	host = card->host;
-	BUG_ON(!host);
+	int err = 0;
 
 	/* Power class selection is supported for versions >= 4.0 */
 	if (card->csd.mmca_vsn < CSD_SPEC_VER_4)
@@ -736,14 +760,14 @@ static int mmc_select_powerclass(struct mmc_card *card,
 
 	switch (1 << host->ios.vdd) {
 	case MMC_VDD_165_195:
-		if (host->ios.clock <= 26000000)
-			pwrclass_val = card->ext_csd.raw_pwr_cl_26_195;
-		else if	(host->ios.clock <= 52000000)
+		if (host->ios.clock <= MMC_HIGH_26_MAX_DTR)
+			pwrclass_val = ext_csd->raw_pwr_cl_26_195;
+		else if (host->ios.clock <= MMC_HIGH_52_MAX_DTR)
 			pwrclass_val = (bus_width <= EXT_CSD_BUS_WIDTH_8) ?
-				card->ext_csd.raw_pwr_cl_52_195 :
-				card->ext_csd.raw_pwr_cl_ddr_52_195;
-		else if (host->ios.clock <= 200000000)
-			pwrclass_val = card->ext_csd.raw_pwr_cl_200_195;
+				ext_csd->raw_pwr_cl_52_195 :
+				ext_csd->raw_pwr_cl_ddr_52_195;
+		else if (host->ios.clock <= MMC_HS200_MAX_DTR)
+			pwrclass_val = ext_csd->raw_pwr_cl_200_195;
 		break;
 	case MMC_VDD_27_28:
 	case MMC_VDD_28_29:
@@ -754,14 +778,16 @@ static int mmc_select_powerclass(struct mmc_card *card,
 	case MMC_VDD_33_34:
 	case MMC_VDD_34_35:
 	case MMC_VDD_35_36:
-		if (host->ios.clock <= 26000000)
-			pwrclass_val = card->ext_csd.raw_pwr_cl_26_360;
-		else if	(host->ios.clock <= 52000000)
+		if (host->ios.clock <= MMC_HIGH_26_MAX_DTR)
+			pwrclass_val = ext_csd->raw_pwr_cl_26_360;
+		else if (host->ios.clock <= MMC_HIGH_52_MAX_DTR)
 			pwrclass_val = (bus_width <= EXT_CSD_BUS_WIDTH_8) ?
-				card->ext_csd.raw_pwr_cl_52_360 :
-				card->ext_csd.raw_pwr_cl_ddr_52_360;
-		else if (host->ios.clock <= 200000000)
-			pwrclass_val = card->ext_csd.raw_pwr_cl_200_360;
+				ext_csd->raw_pwr_cl_52_360 :
+				ext_csd->raw_pwr_cl_ddr_52_360;
+		else if (host->ios.clock <= MMC_HS200_MAX_DTR)
+			pwrclass_val = (bus_width == EXT_CSD_DDR_BUS_WIDTH_8) ?
+				ext_csd->raw_pwr_cl_ddr_200_360 :
+				ext_csd->raw_pwr_cl_200_360;
 		break;
 	default:
 		pr_warning("%s: Voltage range not supported "
@@ -787,40 +813,79 @@ static int mmc_select_powerclass(struct mmc_card *card,
 	return err;
 }
 
+static int mmc_select_powerclass(struct mmc_card *card)
+{
+	struct mmc_host *host = card->host;
+	u32 bus_width, ext_csd_bits;
+	int err, ddr;
+
+	/* Power class selection is supported for versions >= 4.0 */
+	if (card->csd.mmca_vsn < CSD_SPEC_VER_4)
+		return 0;
+
+	bus_width = host->ios.bus_width;
+	/* Power class values are defined only for 4/8 bit bus */
+	if (bus_width == MMC_BUS_WIDTH_1)
+		return 0;
+
+	ddr = card->mmc_avail_type & EXT_CSD_CARD_TYPE_DDR_52;
+	if (ddr)
+		ext_csd_bits = (bus_width == MMC_BUS_WIDTH_8) ?
+			EXT_CSD_DDR_BUS_WIDTH_8 : EXT_CSD_DDR_BUS_WIDTH_4;
+	else
+		ext_csd_bits = (bus_width == MMC_BUS_WIDTH_8) ?
+			EXT_CSD_BUS_WIDTH_8 :  EXT_CSD_BUS_WIDTH_4;
+
+	err = __mmc_select_powerclass(card, ext_csd_bits);
+	if (err)
+		pr_warn("%s: power class selection to bus width %d ddr %d failed\n",
+			mmc_hostname(host), 1 << bus_width, ddr);
+
+	return err;
+}
+
 /*
- * Selects the desired buswidth and switch to the HS200 mode
- * if bus width set without error
+ * Set the bus speed for the selected speed mode.
  */
-static int mmc_select_hs200(struct mmc_card *card)
+static void mmc_set_bus_speed(struct mmc_card *card)
+{
+	unsigned int max_dtr = (unsigned int)-1;
+
+	if ((mmc_card_hs200(card) || mmc_card_hs400(card)) &&
+	     max_dtr > card->ext_csd.hs200_max_dtr)
+		max_dtr = card->ext_csd.hs200_max_dtr;
+	else if (mmc_card_hs(card) && max_dtr > card->ext_csd.hs_max_dtr)
+		max_dtr = card->ext_csd.hs_max_dtr;
+	else if (max_dtr > card->csd.max_dtr)
+		max_dtr = card->csd.max_dtr;
+
+	mmc_set_clock(card->host, max_dtr);
+}
+
+/*
+ * Select the bus width amoung 4-bit and 8-bit(SDR).
+ * If the bus width is changed successfully, return the selected width value.
+ * Zero is returned instead of error value if the wide width is not supported.
+ */
+static int mmc_select_bus_width(struct mmc_card *card)
 {
-	int idx, err = -EINVAL;
-	struct mmc_host *host;
 	static unsigned ext_csd_bits[] = {
-		EXT_CSD_BUS_WIDTH_4,
 		EXT_CSD_BUS_WIDTH_8,
+		EXT_CSD_BUS_WIDTH_4,
 	};
 	static unsigned bus_widths[] = {
-		MMC_BUS_WIDTH_4,
 		MMC_BUS_WIDTH_8,
+		MMC_BUS_WIDTH_4,
 	};
+	struct mmc_host *host = card->host;
+	unsigned idx, bus_width = 0;
+	int err = 0;
 
-	BUG_ON(!card);
-
-	host = card->host;
-
-	if (card->ext_csd.card_type & EXT_CSD_CARD_TYPE_SDR_1_2V &&
-			host->caps2 & MMC_CAP2_HS200_1_2V_SDR)
-		err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120);
-
-	if (err && card->ext_csd.card_type & EXT_CSD_CARD_TYPE_SDR_1_8V &&
-			host->caps2 & MMC_CAP2_HS200_1_8V_SDR)
-		err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180);
-
-	/* If fails try again during next card power cycle */
-	if (err)
-		goto err;
+	if ((card->csd.mmca_vsn < CSD_SPEC_VER_4) &&
+	    !(host->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)))
+		return 0;
 
-	idx = (host->caps & MMC_CAP_8_BIT_DATA) ? 1 : 0;
+	idx = (host->caps & MMC_CAP_8_BIT_DATA) ? 0 : 1;
 
 	/*
 	 * Unlike SD, MMC cards dont have a configuration register to notify
@@ -828,8 +893,7 @@ static int mmc_select_hs200(struct mmc_card *card)
 	 * the supported bus width or compare the ext csd values of current
 	 * bus width and ext csd values of 1 bit mode read earlier.
 	 */
-	for (; idx >= 0; idx--) {
-
+	for (; idx < ARRAY_SIZE(bus_widths); idx++) {
 		/*
 		 * Host is capable of 8bit transfer, then switch
 		 * the device to work in 8bit transfer mode. If the
@@ -844,26 +908,265 @@ static int mmc_select_hs200(struct mmc_card *card)
 		if (err)
 			continue;
 
-		mmc_set_bus_width(card->host, bus_widths[idx]);
+		bus_width = bus_widths[idx];
+		mmc_set_bus_width(host, bus_width);
 
+		/*
+		 * If controller can't handle bus width test,
+		 * compare ext_csd previously read in 1 bit mode
+		 * against ext_csd at new bus width
+		 */
 		if (!(host->caps & MMC_CAP_BUS_WIDTH_TEST))
-			err = mmc_compare_ext_csds(card, bus_widths[idx]);
+			err = mmc_compare_ext_csds(card, bus_width);
 		else
-			err = mmc_bus_test(card, bus_widths[idx]);
-		if (!err)
+			err = mmc_bus_test(card, bus_width);
+
+		if (!err) {
+			err = bus_width;
 			break;
+		} else {
+			pr_warn("%s: switch to bus width %d failed\n",
+				mmc_hostname(host), ext_csd_bits[idx]);
+		}
 	}
 
-	/* switch to HS200 mode if bus width set successfully */
+	return err;
+}
+
+/*
+ * Switch to the high-speed mode
+ */
+static int mmc_select_hs(struct mmc_card *card)
+{
+	int err;
+
+	err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+			   EXT_CSD_HS_TIMING, EXT_CSD_TIMING_HS,
+			   card->ext_csd.generic_cmd6_time,
+			   true, true, true);
 	if (!err)
+		mmc_set_timing(card->host, MMC_TIMING_MMC_HS);
+
+	return err;
+}
+
+/*
+ * Activate wide bus and DDR if supported.
+ */
+static int mmc_select_hs_ddr(struct mmc_card *card)
+{
+	struct mmc_host *host = card->host;
+	u32 bus_width, ext_csd_bits;
+	int err = 0;
+
+	if (!(card->mmc_avail_type & EXT_CSD_CARD_TYPE_DDR_52))
+		return 0;
+
+	bus_width = host->ios.bus_width;
+	if (bus_width == MMC_BUS_WIDTH_1)
+		return 0;
+
+	ext_csd_bits = (bus_width == MMC_BUS_WIDTH_8) ?
+		EXT_CSD_DDR_BUS_WIDTH_8 : EXT_CSD_DDR_BUS_WIDTH_4;
+
+	err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+			EXT_CSD_BUS_WIDTH,
+			ext_csd_bits,
+			card->ext_csd.generic_cmd6_time);
+	if (err) {
+		pr_warn("%s: switch to bus width %d ddr failed\n",
+			mmc_hostname(host), 1 << bus_width);
+		return err;
+	}
+
+	/*
+	 * eMMC cards can support 3.3V to 1.2V i/o (vccq)
+	 * signaling.
+	 *
+	 * EXT_CSD_CARD_TYPE_DDR_1_8V means 3.3V or 1.8V vccq.
+	 *
+	 * 1.8V vccq at 3.3V core voltage (vcc) is not required
+	 * in the JEDEC spec for DDR.
+	 *
+	 * Do not force change in vccq since we are obviously
+	 * working and no change to vccq is needed.
+	 *
+	 * WARNING: eMMC rules are NOT the same as SD DDR
+	 */
+	if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_DDR_1_2V) {
+		err = __mmc_set_signal_voltage(host,
+				MMC_SIGNAL_VOLTAGE_120);
+		if (err)
+			return err;
+	}
+
+	mmc_set_timing(host, MMC_TIMING_MMC_DDR52);
+
+	return err;
+}
+
+static int mmc_select_hs400(struct mmc_card *card)
+{
+	struct mmc_host *host = card->host;
+	int err = 0;
+
+	/*
+	 * HS400 mode requires 8-bit bus width
+	 */
+	if (!(card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS400 &&
+	      host->ios.bus_width == MMC_BUS_WIDTH_8))
+		return 0;
+
+	/*
+	 * Before switching to dual data rate operation for HS400,
+	 * it is required to convert from HS200 mode to HS mode.
+	 */
+	mmc_set_timing(card->host, MMC_TIMING_MMC_HS);
+	mmc_set_bus_speed(card);
+
+	err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+			   EXT_CSD_HS_TIMING, EXT_CSD_TIMING_HS,
+			   card->ext_csd.generic_cmd6_time,
+			   true, true, true);
+	if (err) {
+		pr_warn("%s: switch to high-speed from hs200 failed, err:%d\n",
+			mmc_hostname(host), err);
+		return err;
+	}
+
+	err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+			 EXT_CSD_BUS_WIDTH,
+			 EXT_CSD_DDR_BUS_WIDTH_8,
+			 card->ext_csd.generic_cmd6_time);
+	if (err) {
+		pr_warn("%s: switch to bus width for hs400 failed, err:%d\n",
+			mmc_hostname(host), err);
+		return err;
+	}
+
+	err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+			   EXT_CSD_HS_TIMING, EXT_CSD_TIMING_HS400,
+			   card->ext_csd.generic_cmd6_time,
+			   true, true, true);
+	if (err) {
+		pr_warn("%s: switch to hs400 failed, err:%d\n",
+			 mmc_hostname(host), err);
+		return err;
+	}
+
+	mmc_set_timing(host, MMC_TIMING_MMC_HS400);
+	mmc_set_bus_speed(card);
+
+	return 0;
+}
+
+/*
+ * For device supporting HS200 mode, the following sequence
+ * should be done before executing the tuning process.
+ * 1. set the desired bus width(4-bit or 8-bit, 1-bit is not supported)
+ * 2. switch to HS200 mode
+ * 3. set the clock to > 52Mhz and <=200MHz
+ */
+static int mmc_select_hs200(struct mmc_card *card)
+{
+	struct mmc_host *host = card->host;
+	int err = -EINVAL;
+
+	if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200_1_2V)
+		err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120);
+
+	if (err && card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200_1_8V)
+		err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180);
+
+	/* If fails try again during next card power cycle */
+	if (err)
+		goto err;
+
+	/*
+	 * Set the bus width(4 or 8) with host's support and
+	 * switch to HS200 mode if bus width is set successfully.
+	 */
+	err = mmc_select_bus_width(card);
+	if (!IS_ERR_VALUE(err)) {
 		err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
-				EXT_CSD_HS_TIMING, 2,
-				card->ext_csd.generic_cmd6_time,
-				true, true, true);
+				   EXT_CSD_HS_TIMING, EXT_CSD_TIMING_HS200,
+				   card->ext_csd.generic_cmd6_time,
+				   true, true, true);
+		if (!err)
+			mmc_set_timing(host, MMC_TIMING_MMC_HS200);
+	}
 err:
 	return err;
 }
 
+/*
+ * Activate High Speed or HS200 mode if supported.
+ */
+static int mmc_select_timing(struct mmc_card *card)
+{
+	int err = 0;
+
+	if ((card->csd.mmca_vsn < CSD_SPEC_VER_4 &&
+	     card->ext_csd.hs_max_dtr == 0))
+		goto bus_speed;
+
+	if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200)
+		err = mmc_select_hs200(card);
+	else if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS)
+		err = mmc_select_hs(card);
+
+	if (err && err != -EBADMSG)
+		return err;
+
+	if (err) {
+		pr_warn("%s: switch to %s failed\n",
+			mmc_card_hs(card) ? "high-speed" :
+			(mmc_card_hs200(card) ? "hs200" : ""),
+			mmc_hostname(card->host));
+		err = 0;
+	}
+
+bus_speed:
+	/*
+	 * Set the bus speed to the selected bus timing.
+	 * If timing is not selected, backward compatible is the default.
+	 */
+	mmc_set_bus_speed(card);
+	return err;
+}
+
+/*
+ * Execute tuning sequence to seek the proper bus operating
+ * conditions for HS200 and HS400, which sends CMD21 to the device.
+ */
+static int mmc_hs200_tuning(struct mmc_card *card)
+{
+	struct mmc_host *host = card->host;
+	int err = 0;
+
+	/*
+	 * Timing should be adjusted to the HS400 target
+	 * operation frequency for tuning process
+	 */
+	if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS400 &&
+	    host->ios.bus_width == MMC_BUS_WIDTH_8)
+		if (host->ops->prepare_hs400_tuning)
+			host->ops->prepare_hs400_tuning(host, &host->ios);
+
+	if (host->ops->execute_tuning) {
+		mmc_host_clk_hold(host);
+		err = host->ops->execute_tuning(host,
+				MMC_SEND_TUNING_BLOCK_HS200);
+		mmc_host_clk_release(host);
+
+		if (err)
+			pr_warn("%s: tuning execution failed\n",
+				mmc_hostname(host));
+	}
+
+	return err;
+}
+
 /*
  * Handle the detection and initialisation of a card.
  *
@@ -874,9 +1177,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 	struct mmc_card *oldcard)
 {
 	struct mmc_card *card;
-	int err, ddr = 0;
+	int err;
 	u32 cid[4];
-	unsigned int max_dtr;
 	u32 rocr;
 	u8 *ext_csd = NULL;
 
@@ -1068,206 +1370,34 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 	}
 
 	/*
-	 * Activate high speed (if supported)
-	 */
-	if (card->ext_csd.hs_max_dtr != 0) {
-		err = 0;
-		if (card->ext_csd.hs_max_dtr > 52000000 &&
-		    host->caps2 & MMC_CAP2_HS200)
-			err = mmc_select_hs200(card);
-		else if	(host->caps & MMC_CAP_MMC_HIGHSPEED)
-			err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
-					EXT_CSD_HS_TIMING, 1,
-					card->ext_csd.generic_cmd6_time,
-					true, true, true);
-
-		if (err && err != -EBADMSG)
-			goto free_card;
-
-		if (err) {
-			pr_warning("%s: switch to highspeed failed\n",
-			       mmc_hostname(card->host));
-			err = 0;
-		} else {
-			if (card->ext_csd.hs_max_dtr > 52000000 &&
-			    host->caps2 & MMC_CAP2_HS200) {
-				mmc_card_set_hs200(card);
-				mmc_set_timing(card->host,
-					       MMC_TIMING_MMC_HS200);
-			} else {
-				mmc_card_set_highspeed(card);
-				mmc_set_timing(card->host, MMC_TIMING_MMC_HS);
-			}
-		}
-	}
-
-	/*
-	 * Compute bus speed.
-	 */
-	max_dtr = (unsigned int)-1;
-
-	if (mmc_card_highspeed(card) || mmc_card_hs200(card)) {
-		if (max_dtr > card->ext_csd.hs_max_dtr)
-			max_dtr = card->ext_csd.hs_max_dtr;
-		if (mmc_card_highspeed(card) && (max_dtr > 52000000))
-			max_dtr = 52000000;
-	} else if (max_dtr > card->csd.max_dtr) {
-		max_dtr = card->csd.max_dtr;
-	}
-
-	mmc_set_clock(host, max_dtr);
-
-	/*
-	 * Indicate DDR mode (if supported).
+	 * Select timing interface
 	 */
-	if (mmc_card_highspeed(card)) {
-		if ((card->ext_csd.card_type & EXT_CSD_CARD_TYPE_DDR_1_8V)
-			&& (host->caps & MMC_CAP_1_8V_DDR))
-				ddr = MMC_1_8V_DDR_MODE;
-		else if ((card->ext_csd.card_type & EXT_CSD_CARD_TYPE_DDR_1_2V)
-			&& (host->caps & MMC_CAP_1_2V_DDR))
-				ddr = MMC_1_2V_DDR_MODE;
-	}
+	err = mmc_select_timing(card);
+	if (err)
+		goto free_card;
 
-	/*
-	 * Indicate HS200 SDR mode (if supported).
-	 */
 	if (mmc_card_hs200(card)) {
-		u32 ext_csd_bits;
-		u32 bus_width = card->host->ios.bus_width;
-
-		/*
-		 * For devices supporting HS200 mode, the bus width has
-		 * to be set before executing the tuning function. If
-		 * set before tuning, then device will respond with CRC
-		 * errors for responses on CMD line. So for HS200 the
-		 * sequence will be
-		 * 1. set bus width 4bit / 8 bit (1 bit not supported)
-		 * 2. switch to HS200 mode
-		 * 3. set the clock to > 52Mhz <=200MHz and
-		 * 4. execute tuning for HS200
-		 */
-		if ((host->caps2 & MMC_CAP2_HS200) &&
-		    card->host->ops->execute_tuning) {
-			mmc_host_clk_hold(card->host);
-			err = card->host->ops->execute_tuning(card->host,
-				MMC_SEND_TUNING_BLOCK_HS200);
-			mmc_host_clk_release(card->host);
-		}
-		if (err) {
-			pr_warning("%s: tuning execution failed\n",
-				   mmc_hostname(card->host));
+		err = mmc_hs200_tuning(card);
+		if (err)
 			goto err;
-		}
 
-		ext_csd_bits = (bus_width == MMC_BUS_WIDTH_8) ?
-				EXT_CSD_BUS_WIDTH_8 : EXT_CSD_BUS_WIDTH_4;
-		err = mmc_select_powerclass(card, ext_csd_bits);
+		err = mmc_select_hs400(card);
 		if (err)
-			pr_warning("%s: power class selection to bus width %d"
-				   " failed\n", mmc_hostname(card->host),
-				   1 << bus_width);
+			goto err;
+	} else if (mmc_card_hs(card)) {
+		/* Select the desired bus width optionally */
+		err = mmc_select_bus_width(card);
+		if (!IS_ERR_VALUE(err)) {
+			err = mmc_select_hs_ddr(card);
+			if (err)
+				goto err;
+		}
 	}
 
 	/*
-	 * Activate wide bus and DDR (if supported).
+	 * Choose the power class with selected bus interface
 	 */
-	if (!mmc_card_hs200(card) &&
-	    (card->csd.mmca_vsn >= CSD_SPEC_VER_4) &&
-	    (host->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA))) {
-		static unsigned ext_csd_bits[][2] = {
-			{ EXT_CSD_BUS_WIDTH_8, EXT_CSD_DDR_BUS_WIDTH_8 },
-			{ EXT_CSD_BUS_WIDTH_4, EXT_CSD_DDR_BUS_WIDTH_4 },
-			{ EXT_CSD_BUS_WIDTH_1, EXT_CSD_BUS_WIDTH_1 },
-		};
-		static unsigned bus_widths[] = {
-			MMC_BUS_WIDTH_8,
-			MMC_BUS_WIDTH_4,
-			MMC_BUS_WIDTH_1
-		};
-		unsigned idx, bus_width = 0;
-
-		if (host->caps & MMC_CAP_8_BIT_DATA)
-			idx = 0;
-		else
-			idx = 1;
-		for (; idx < ARRAY_SIZE(bus_widths); idx++) {
-			bus_width = bus_widths[idx];
-			if (bus_width == MMC_BUS_WIDTH_1)
-				ddr = 0; /* no DDR for 1-bit width */
-			err = mmc_select_powerclass(card, ext_csd_bits[idx][0]);
-			if (err)
-				pr_warning("%s: power class selection to "
-					   "bus width %d failed\n",
-					   mmc_hostname(card->host),
-					   1 << bus_width);
-
-			err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
-					 EXT_CSD_BUS_WIDTH,
-					 ext_csd_bits[idx][0],
-					 card->ext_csd.generic_cmd6_time);
-			if (!err) {
-				mmc_set_bus_width(card->host, bus_width);
-
-				/*
-				 * If controller can't handle bus width test,
-				 * compare ext_csd previously read in 1 bit mode
-				 * against ext_csd at new bus width
-				 */
-				if (!(host->caps & MMC_CAP_BUS_WIDTH_TEST))
-					err = mmc_compare_ext_csds(card,
-						bus_width);
-				else
-					err = mmc_bus_test(card, bus_width);
-				if (!err)
-					break;
-			}
-		}
-
-		if (!err && ddr) {
-			err = mmc_select_powerclass(card, ext_csd_bits[idx][1]);
-			if (err)
-				pr_warning("%s: power class selection to "
-					   "bus width %d ddr %d failed\n",
-					   mmc_hostname(card->host),
-					   1 << bus_width, ddr);
-
-			err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
-					 EXT_CSD_BUS_WIDTH,
-					 ext_csd_bits[idx][1],
-					 card->ext_csd.generic_cmd6_time);
-		}
-		if (err) {
-			pr_warning("%s: switch to bus width %d ddr %d "
-				"failed\n", mmc_hostname(card->host),
-				1 << bus_width, ddr);
-			goto free_card;
-		} else if (ddr) {
-			/*
-			 * eMMC cards can support 3.3V to 1.2V i/o (vccq)
-			 * signaling.
-			 *
-			 * EXT_CSD_CARD_TYPE_DDR_1_8V means 3.3V or 1.8V vccq.
-			 *
-			 * 1.8V vccq at 3.3V core voltage (vcc) is not required
-			 * in the JEDEC spec for DDR.
-			 *
-			 * Do not force change in vccq since we are obviously
-			 * working and no change to vccq is needed.
-			 *
-			 * WARNING: eMMC rules are NOT the same as SD DDR
-			 */
-			if (ddr == MMC_1_2V_DDR_MODE) {
-				err = __mmc_set_signal_voltage(host,
-					MMC_SIGNAL_VOLTAGE_120);
-				if (err)
-					goto err;
-			}
-			mmc_card_set_ddr_mode(card);
-			mmc_set_timing(card->host, MMC_TIMING_UHS_DDR50);
-			mmc_set_bus_width(card->host, bus_width);
-		}
-	}
+	mmc_select_powerclass(card);
 
 	/*
 	 * Enable HPI feature (if supported)
@@ -1507,7 +1637,6 @@ static int _mmc_suspend(struct mmc_host *host, bool is_suspend)
 		err = mmc_sleep(host);
 	else if (!mmc_host_is_spi(host))
 		err = mmc_deselect_cards(host);
-	host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_200);
 
 	if (!err) {
 		mmc_power_off(host);
@@ -1637,7 +1766,6 @@ static int mmc_power_restore(struct mmc_host *host)
 {
 	int ret;
 
-	host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_200);
 	mmc_claim_host(host);
 	ret = mmc_init_card(host, host->card->ocr, host->card);
 	mmc_release_host(host);

drivers/mmc/core/sd.c

@@ -707,18 +707,10 @@ static struct attribute *sd_std_attrs[] = {
 	&dev_attr_serial.attr,
 	NULL,
 };
-
-static struct attribute_group sd_std_attr_group = {
-	.attrs = sd_std_attrs,
-};
-
-static const struct attribute_group *sd_attr_groups[] = {
-	&sd_std_attr_group,
-	NULL,
-};
+ATTRIBUTE_GROUPS(sd_std);
 
 struct device_type sd_type = {
-	.groups = sd_attr_groups,
+	.groups = sd_std_groups,
 };
 
 /*
@@ -895,7 +887,7 @@ unsigned mmc_sd_get_max_clock(struct mmc_card *card)
 {
 	unsigned max_dtr = (unsigned int)-1;
 
-	if (mmc_card_highspeed(card)) {
+	if (mmc_card_hs(card)) {
 		if (max_dtr > card->sw_caps.hs_max_dtr)
 			max_dtr = card->sw_caps.hs_max_dtr;
 	} else if (max_dtr > card->csd.max_dtr) {
@@ -905,12 +897,6 @@ unsigned mmc_sd_get_max_clock(struct mmc_card *card)
 	return max_dtr;
 }
 
-void mmc_sd_go_highspeed(struct mmc_card *card)
-{
-	mmc_card_set_highspeed(card);
-	mmc_set_timing(card->host, MMC_TIMING_SD_HS);
-}
-
 /*
  * Handle the detection and initialisation of a card.
  *
@@ -985,16 +971,13 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
 		err = mmc_sd_init_uhs_card(card);
 		if (err)
 			goto free_card;
-
-		/* Card is an ultra-high-speed card */
-		mmc_card_set_uhs(card);
 	} else {
 		/*
 		 * Attempt to change to high-speed (if supported)
 		 */
 		err = mmc_sd_switch_hs(card);
 		if (err > 0)
-			mmc_sd_go_highspeed(card);
+			mmc_set_timing(card->host, MMC_TIMING_SD_HS);
 		else if (err)
 			goto free_card;
 
@@ -1089,7 +1072,7 @@ static int _mmc_sd_suspend(struct mmc_host *host)
 
 	if (!mmc_host_is_spi(host))
 		err = mmc_deselect_cards(host);
-	host->card->state &= ~MMC_STATE_HIGHSPEED;
+
 	if (!err) {
 		mmc_power_off(host);
 		mmc_card_set_suspended(host->card);
@@ -1198,7 +1181,6 @@ static int mmc_sd_power_restore(struct mmc_host *host)
 {
 	int ret;
 
-	host->card->state &= ~MMC_STATE_HIGHSPEED;
 	mmc_claim_host(host);
 	ret = mmc_sd_init_card(host, host->card->ocr, host->card);
 	mmc_release_host(host);

drivers/mmc/core/sd.h

@@ -12,6 +12,5 @@ int mmc_sd_setup_card(struct mmc_host *host, struct mmc_card *card,
 	bool reinit);
 unsigned mmc_sd_get_max_clock(struct mmc_card *card);
 int mmc_sd_switch_hs(struct mmc_card *card);
-void mmc_sd_go_highspeed(struct mmc_card *card);
 
 #endif

drivers/mmc/core/sdio.c

@@ -363,7 +363,7 @@ static unsigned mmc_sdio_get_max_clock(struct mmc_card *card)
 {
 	unsigned max_dtr;
 
-	if (mmc_card_highspeed(card)) {
+	if (mmc_card_hs(card)) {
 		/*
 		 * The SDIO specification doesn't mention how
 		 * the CIS transfer speed register relates to
@@ -733,7 +733,6 @@ try_again:
 		mmc_set_clock(host, card->cis.max_dtr);
 
 		if (card->cccr.high_speed) {
-			mmc_card_set_highspeed(card);
 			mmc_set_timing(card->host, MMC_TIMING_SD_HS);
 		}
 
@@ -792,16 +791,13 @@ try_again:
 		err = mmc_sdio_init_uhs_card(card);
 		if (err)
 			goto remove;
-
-		/* Card is an ultra-high-speed card */
-		mmc_card_set_uhs(card);
 	} else {
 		/*
 		 * Switch to high-speed (if supported).
 		 */
 		err = sdio_enable_hs(card);
 		if (err > 0)
-			mmc_sd_go_highspeed(card);
+			mmc_set_timing(card->host, MMC_TIMING_SD_HS);
 		else if (err)
 			goto remove;
 
@@ -943,40 +939,21 @@ static int mmc_sdio_pre_suspend(struct mmc_host *host)
  */
 static int mmc_sdio_suspend(struct mmc_host *host)
 {
-	int i, err = 0;
-
-	for (i = 0; i < host->card->sdio_funcs; i++) {
-		struct sdio_func *func = host->card->sdio_func[i];
-		if (func && sdio_func_present(func) && func->dev.driver) {
-			const struct dev_pm_ops *pmops = func->dev.driver->pm;
-			err = pmops->suspend(&func->dev);
-			if (err)
-				break;
-		}
-	}
-	while (err && --i >= 0) {
-		struct sdio_func *func = host->card->sdio_func[i];
-		if (func && sdio_func_present(func) && func->dev.driver) {
-			const struct dev_pm_ops *pmops = func->dev.driver->pm;
-			pmops->resume(&func->dev);
-		}
-	}
-
-	if (!err && mmc_card_keep_power(host) && mmc_card_wake_sdio_irq(host)) {
+	if (mmc_card_keep_power(host) && mmc_card_wake_sdio_irq(host)) {
 		mmc_claim_host(host);
 		sdio_disable_wide(host->card);
 		mmc_release_host(host);
 	}
 
-	if (!err && !mmc_card_keep_power(host))
+	if (!mmc_card_keep_power(host))
 		mmc_power_off(host);
 
-	return err;
+	return 0;
 }
 
 static int mmc_sdio_resume(struct mmc_host *host)
 {
-	int i, err = 0;
+	int err = 0;
 
 	BUG_ON(!host);
 	BUG_ON(!host->card);
@@ -1019,24 +996,6 @@ static int mmc_sdio_resume(struct mmc_host *host)
 		wake_up_process(host->sdio_irq_thread);
 	mmc_release_host(host);
 
-	/*
-	 * If the card looked to be the same as before suspending, then
-	 * we proceed to resume all card functions.  If one of them returns
-	 * an error then we simply return that error to the core and the
-	 * card will be redetected as new.  It is the responsibility of
-	 * the function driver to perform further tests with the extra
-	 * knowledge it has of the card to confirm the card is indeed the
-	 * same as before suspending (same MAC address for network cards,
-	 * etc.) and return an error otherwise.
-	 */
-	for (i = 0; !err && i < host->card->sdio_funcs; i++) {
-		struct sdio_func *func = host->card->sdio_func[i];
-		if (func && sdio_func_present(func) && func->dev.driver) {
-			const struct dev_pm_ops *pmops = func->dev.driver->pm;
-			err = pmops->resume(&func->dev);
-		}
-	}
-
 	host->pm_flags &= ~MMC_PM_KEEP_POWER;
 	return err;
 }

drivers/mmc/core/sdio_bus.c

@@ -197,20 +197,8 @@ static int sdio_bus_remove(struct device *dev)
 
 #ifdef CONFIG_PM
 
-#ifdef CONFIG_PM_SLEEP
-static int pm_no_operation(struct device *dev)
-{
-	/*
-	 * Prevent the PM core from calling SDIO device drivers' suspend
-	 * callback routines, which it is not supposed to do, by using this
-	 * empty function as the bus type suspend callaback for SDIO.
-	 */
-	return 0;
-}
-#endif
-
 static const struct dev_pm_ops sdio_bus_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(pm_no_operation, pm_no_operation)
+	SET_SYSTEM_SLEEP_PM_OPS(pm_generic_suspend, pm_generic_resume)
 	SET_RUNTIME_PM_OPS(
 		pm_generic_runtime_suspend,
 		pm_generic_runtime_resume,

drivers/mmc/core/sdio_irq.c

@@ -90,6 +90,15 @@ static int process_sdio_pending_irqs(struct mmc_host *host)
 	return ret;
 }
 
+void sdio_run_irqs(struct mmc_host *host)
+{
+	mmc_claim_host(host);
+	host->sdio_irq_pending = true;
+	process_sdio_pending_irqs(host);
+	mmc_release_host(host);
+}
+EXPORT_SYMBOL_GPL(sdio_run_irqs);
+
 static int sdio_irq_thread(void *_host)
 {
 	struct mmc_host *host = _host;
@@ -189,14 +198,20 @@ static int sdio_card_irq_get(struct mmc_card *card)
 	WARN_ON(!host->claimed);
 
 	if (!host->sdio_irqs++) {
-		atomic_set(&host->sdio_irq_thread_abort, 0);
-		host->sdio_irq_thread =
-			kthread_run(sdio_irq_thread, host, "ksdioirqd/%s",
-				mmc_hostname(host));
-		if (IS_ERR(host->sdio_irq_thread)) {
-			int err = PTR_ERR(host->sdio_irq_thread);
-			host->sdio_irqs--;
-			return err;
+		if (!(host->caps2 & MMC_CAP2_SDIO_IRQ_NOTHREAD)) {
+			atomic_set(&host->sdio_irq_thread_abort, 0);
+			host->sdio_irq_thread =
+				kthread_run(sdio_irq_thread, host,
+					    "ksdioirqd/%s", mmc_hostname(host));
+			if (IS_ERR(host->sdio_irq_thread)) {
+				int err = PTR_ERR(host->sdio_irq_thread);
+				host->sdio_irqs--;
+				return err;
+			}
+		} else {
+			mmc_host_clk_hold(host);
+			host->ops->enable_sdio_irq(host, 1);
+			mmc_host_clk_release(host);
 		}
 	}
 
@@ -211,8 +226,14 @@ static int sdio_card_irq_put(struct mmc_card *card)
 	BUG_ON(host->sdio_irqs < 1);
 
 	if (!--host->sdio_irqs) {
-		atomic_set(&host->sdio_irq_thread_abort, 1);
-		kthread_stop(host->sdio_irq_thread);
+		if (!(host->caps2 & MMC_CAP2_SDIO_IRQ_NOTHREAD)) {
+			atomic_set(&host->sdio_irq_thread_abort, 1);
+			kthread_stop(host->sdio_irq_thread);
+		} else {
+			mmc_host_clk_hold(host);
+			host->ops->enable_sdio_irq(host, 0);
+			mmc_host_clk_release(host);
+		}
 	}
 
 	return 0;

drivers/mmc/core/slot-gpio.c

@@ -32,9 +32,7 @@ static irqreturn_t mmc_gpio_cd_irqt(int irq, void *dev_id)
 	/* Schedule a card detection after a debounce timeout */
 	struct mmc_host *host = dev_id;
 
-	if (host->ops->card_event)
-		host->ops->card_event(host);
-
+	host->trigger_card_event = true;
 	mmc_detect_change(host, msecs_to_jiffies(200));
 
 	return IRQ_HANDLED;

drivers/mmc/host/Kconfig

@@ -168,7 +168,7 @@ config MMC_SDHCI_ESDHC_IMX
 
 config MMC_SDHCI_DOVE
 	tristate "SDHCI support on Marvell's Dove SoC"
-	depends on ARCH_DOVE
+	depends on ARCH_DOVE || MACH_DOVE
 	depends on MMC_SDHCI_PLTFM
 	select MMC_SDHCI_IO_ACCESSORS
 	help
@@ -283,6 +283,15 @@ config MMC_SDHCI_BCM2835
 
 	  If unsure, say N.
 
+config MMC_MOXART
+	tristate "MOXART SD/MMC Host Controller support"
+	depends on ARCH_MOXART && MMC
+	help
+	  This selects support for the MOXART SD/MMC Host Controller.
+	  MOXA provides one multi-functional card reader which can
+	  be found on some embedded hardware such as UC-7112-LX.
+	  If you have a controller with this interface, say Y here.
+
 config MMC_OMAP
 	tristate "TI OMAP Multimedia Card Interface support"
 	depends on ARCH_OMAP
@@ -688,6 +697,12 @@ config MMC_WMT
 	  To compile this driver as a module, choose M here: the
 	  module will be called wmt-sdmmc.
 
+config MMC_USDHI6ROL0
+	tristate "Renesas USDHI6ROL0 SD/SDIO Host Controller support"
+	help
+	  This selects support for the Renesas USDHI6ROL0 SD/SDIO
+	  Host Controller
+
 config MMC_REALTEK_PCI
 	tristate "Realtek PCI-E SD/MMC Card Interface Driver"
 	depends on MFD_RTSX_PCI

drivers/mmc/host/Makefile

@@ -50,7 +50,9 @@ obj-$(CONFIG_MMC_JZ4740)	+= jz4740_mmc.o
 obj-$(CONFIG_MMC_VUB300)	+= vub300.o
 obj-$(CONFIG_MMC_USHC)		+= ushc.o
 obj-$(CONFIG_MMC_WMT)		+= wmt-sdmmc.o
+obj-$(CONFIG_MMC_MOXART)	+= moxart-mmc.o
 obj-$(CONFIG_MMC_SUNXI)		+= sunxi-mmc.o
+obj-$(CONFIG_MMC_USDHI6ROL0)	+= usdhi6rol0.o
 
 obj-$(CONFIG_MMC_REALTEK_PCI)	+= rtsx_pci_sdmmc.o
 obj-$(CONFIG_MMC_REALTEK_USB)	+= rtsx_usb_sdmmc.o

drivers/mmc/host/atmel-mci.c

@@ -820,16 +820,9 @@ static void atmci_pdc_complete(struct atmel_mci *host)
 
 	atmci_pdc_cleanup(host);
 
-	/*
-	 * If the card was removed, data will be NULL. No point trying
-	 * to send the stop command or waiting for NBUSY in this case.
-	 */
-	if (host->data) {
-		dev_dbg(&host->pdev->dev,
-		        "(%s) set pending xfer complete\n", __func__);
-		atmci_set_pending(host, EVENT_XFER_COMPLETE);
-		tasklet_schedule(&host->tasklet);
-	}
+	dev_dbg(&host->pdev->dev, "(%s) set pending xfer complete\n", __func__);
+	atmci_set_pending(host, EVENT_XFER_COMPLETE);
+	tasklet_schedule(&host->tasklet);
 }
 
 static void atmci_dma_cleanup(struct atmel_mci *host)

drivers/mmc/host/dw_mmc-exynos.c

@@ -187,7 +187,7 @@ static void dw_mci_exynos_set_ios(struct dw_mci *host, struct mmc_ios *ios)
 	unsigned long actual;
 	u8 div = priv->ciu_div + 1;
 
-	if (ios->timing == MMC_TIMING_UHS_DDR50) {
+	if (ios->timing == MMC_TIMING_MMC_DDR52) {
 		mci_writel(host, CLKSEL, priv->ddr_timing);
 		/* Should be double rate for DDR mode */
 		if (ios->bus_width == MMC_BUS_WIDTH_8)
@@ -386,8 +386,7 @@ static int dw_mci_exynos_execute_tuning(struct dw_mci_slot *slot, u32 opcode,
 
 /* Common capabilities of Exynos4/Exynos5 SoC */
 static unsigned long exynos_dwmmc_caps[4] = {
-	MMC_CAP_UHS_DDR50 | MMC_CAP_1_8V_DDR |
-		MMC_CAP_8_BIT_DATA | MMC_CAP_CMD23,
+	MMC_CAP_1_8V_DDR | MMC_CAP_8_BIT_DATA | MMC_CAP_CMD23,
 	MMC_CAP_CMD23,
 	MMC_CAP_CMD23,
 	MMC_CAP_CMD23,
@@ -426,7 +425,7 @@ static int dw_mci_exynos_probe(struct platform_device *pdev)
 	return dw_mci_pltfm_register(pdev, drv_data);
 }
 
-const struct dev_pm_ops dw_mci_exynos_pmops = {
+static const struct dev_pm_ops dw_mci_exynos_pmops = {
 	SET_SYSTEM_SLEEP_PM_OPS(dw_mci_exynos_suspend, dw_mci_exynos_resume)
 	.resume_noirq = dw_mci_exynos_resume_noirq,
 	.thaw_noirq = dw_mci_exynos_resume_noirq,

drivers/mmc/host/dw_mmc.c

@@ -235,12 +235,6 @@ err:
 }
 #endif /* defined(CONFIG_DEBUG_FS) */
 
-static void dw_mci_set_timeout(struct dw_mci *host)
-{
-	/* timeout (maximum) */
-	mci_writel(host, TMOUT, 0xffffffff);
-}
-
 static u32 dw_mci_prepare_command(struct mmc_host *mmc, struct mmc_command *cmd)
 {
 	struct mmc_data	*data;
@@ -257,9 +251,8 @@ static u32 dw_mci_prepare_command(struct mmc_host *mmc, struct mmc_command *cmd)
 	    (cmd->opcode == SD_IO_RW_DIRECT &&
 	     ((cmd->arg >> 9) & 0x1FFFF) == SDIO_CCCR_ABORT))
 		cmdr |= SDMMC_CMD_STOP;
-	else
-		if (cmd->opcode != MMC_SEND_STATUS && cmd->data)
-			cmdr |= SDMMC_CMD_PRV_DAT_WAIT;
+	else if (cmd->opcode != MMC_SEND_STATUS && cmd->data)
+		cmdr |= SDMMC_CMD_PRV_DAT_WAIT;
 
 	if (cmd->flags & MMC_RSP_PRESENT) {
 		/* We expect a response, so set this bit */
@@ -850,8 +843,6 @@ static void __dw_mci_start_request(struct dw_mci *host,
 	u32 cmdflags;
 
 	mrq = slot->mrq;
-	if (host->pdata->select_slot)
-		host->pdata->select_slot(slot->id);
 
 	host->cur_slot = slot;
 	host->mrq = mrq;
@@ -864,7 +855,7 @@ static void __dw_mci_start_request(struct dw_mci *host,
 
 	data = cmd->data;
 	if (data) {
-		dw_mci_set_timeout(host);
+		mci_writel(host, TMOUT, 0xFFFFFFFF);
 		mci_writel(host, BYTCNT, data->blksz*data->blocks);
 		mci_writel(host, BLKSIZ, data->blksz);
 	}
@@ -962,7 +953,7 @@ static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	regs = mci_readl(slot->host, UHS_REG);
 
 	/* DDR mode set */
-	if (ios->timing == MMC_TIMING_UHS_DDR50)
+	if (ios->timing == MMC_TIMING_MMC_DDR52)
 		regs |= ((0x1 << slot->id) << 16);
 	else
 		regs &= ~((0x1 << slot->id) << 16);
@@ -985,17 +976,11 @@ static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	switch (ios->power_mode) {
 	case MMC_POWER_UP:
 		set_bit(DW_MMC_CARD_NEED_INIT, &slot->flags);
-		/* Power up slot */
-		if (slot->host->pdata->setpower)
-			slot->host->pdata->setpower(slot->id, mmc->ocr_avail);
 		regs = mci_readl(slot->host, PWREN);
 		regs |= (1 << slot->id);
 		mci_writel(slot->host, PWREN, regs);
 		break;
 	case MMC_POWER_OFF:
-		/* Power down slot */
-		if (slot->host->pdata->setpower)
-			slot->host->pdata->setpower(slot->id, 0);
 		regs = mci_readl(slot->host, PWREN);
 		regs &= ~(1 << slot->id);
 		mci_writel(slot->host, PWREN, regs);
@@ -1009,15 +994,13 @@ static int dw_mci_get_ro(struct mmc_host *mmc)
 {
 	int read_only;
 	struct dw_mci_slot *slot = mmc_priv(mmc);
-	struct dw_mci_board *brd = slot->host->pdata;
+	int gpio_ro = mmc_gpio_get_ro(mmc);
 
 	/* Use platform get_ro function, else try on board write protect */
 	if (slot->quirks & DW_MCI_SLOT_QUIRK_NO_WRITE_PROTECT)
 		read_only = 0;
-	else if (brd->get_ro)
-		read_only = brd->get_ro(slot->id);
-	else if (gpio_is_valid(slot->wp_gpio))
-		read_only = gpio_get_value(slot->wp_gpio);
+	else if (!IS_ERR_VALUE(gpio_ro))
+		read_only = gpio_ro;
 	else
 		read_only =
 			mci_readl(slot->host, WRTPRT) & (1 << slot->id) ? 1 : 0;
@@ -1039,8 +1022,6 @@ static int dw_mci_get_cd(struct mmc_host *mmc)
 	/* Use platform get_cd function, else try onboard card detect */
 	if (brd->quirks & DW_MCI_QUIRK_BROKEN_CARD_DETECTION)
 		present = 1;
-	else if (brd->get_cd)
-		present = !brd->get_cd(slot->id);
 	else if (!IS_ERR_VALUE(gpio_cd))
 		present = gpio_cd;
 	else
@@ -1248,7 +1229,7 @@ static int dw_mci_data_complete(struct dw_mci *host, struct mmc_data *data)
 			data->error = -EIO;
 		}
 
-		dev_err(host->dev, "data error, status 0x%08x\n", status);
+		dev_dbg(host->dev, "data error, status 0x%08x\n", status);
 
 		/*
 		 * After an error, there may be data lingering
@@ -2045,86 +2026,15 @@ static int dw_mci_of_get_slot_quirks(struct device *dev, u8 slot)
 
 	return quirks;
 }
-
-/* find out bus-width for a given slot */
-static u32 dw_mci_of_get_bus_wd(struct device *dev, u8 slot)
-{
-	struct device_node *np = dw_mci_of_find_slot_node(dev, slot);
-	u32 bus_wd = 1;
-
-	if (!np)
-		return 1;
-
-	if (of_property_read_u32(np, "bus-width", &bus_wd))
-		dev_err(dev, "bus-width property not found, assuming width"
-			       " as 1\n");
-	return bus_wd;
-}
-
-/* find the write protect gpio for a given slot; or -1 if none specified */
-static int dw_mci_of_get_wp_gpio(struct device *dev, u8 slot)
-{
-	struct device_node *np = dw_mci_of_find_slot_node(dev, slot);
-	int gpio;
-
-	if (!np)
-		return -EINVAL;
-
-	gpio = of_get_named_gpio(np, "wp-gpios", 0);
-
-	/* Having a missing entry is valid; return silently */
-	if (!gpio_is_valid(gpio))
-		return -EINVAL;
-
-	if (devm_gpio_request(dev, gpio, "dw-mci-wp")) {
-		dev_warn(dev, "gpio [%d] request failed\n", gpio);
-		return -EINVAL;
-	}
-
-	return gpio;
-}
-
-/* find the cd gpio for a given slot */
-static void dw_mci_of_get_cd_gpio(struct device *dev, u8 slot,
-					struct mmc_host *mmc)
-{
-	struct device_node *np = dw_mci_of_find_slot_node(dev, slot);
-	int gpio;
-
-	if (!np)
-		return;
-
-	gpio = of_get_named_gpio(np, "cd-gpios", 0);
-
-	/* Having a missing entry is valid; return silently */
-	if (!gpio_is_valid(gpio))
-		return;
-
-	if (mmc_gpio_request_cd(mmc, gpio, 0))
-		dev_warn(dev, "gpio [%d] request failed\n", gpio);
-}
 #else /* CONFIG_OF */
 static int dw_mci_of_get_slot_quirks(struct device *dev, u8 slot)
 {
 	return 0;
 }
-static u32 dw_mci_of_get_bus_wd(struct device *dev, u8 slot)
-{
-	return 1;
-}
 static struct device_node *dw_mci_of_find_slot_node(struct device *dev, u8 slot)
 {
 	return NULL;
 }
-static int dw_mci_of_get_wp_gpio(struct device *dev, u8 slot)
-{
-	return -EINVAL;
-}
-static void dw_mci_of_get_cd_gpio(struct device *dev, u8 slot,
-					struct mmc_host *mmc)
-{
-	return;
-}
 #endif /* CONFIG_OF */
 
 static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
@@ -2134,7 +2044,6 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
 	const struct dw_mci_drv_data *drv_data = host->drv_data;
 	int ctrl_id, ret;
 	u32 freq[2];
-	u8 bus_width;
 
 	mmc = mmc_alloc_host(sizeof(struct dw_mci_slot), host->dev);
 	if (!mmc)
@@ -2158,17 +2067,7 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
 		mmc->f_max = freq[1];
 	}
 
-	if (host->pdata->get_ocr)
-		mmc->ocr_avail = host->pdata->get_ocr(id);
-	else
-		mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
-
-	/*
-	 * Start with slot power disabled, it will be enabled when a card
-	 * is detected.
-	 */
-	if (host->pdata->setpower)
-		host->pdata->setpower(id, 0);
+	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
 
 	if (host->pdata->caps)
 		mmc->caps = host->pdata->caps;
@@ -2189,19 +2088,7 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
 	if (host->pdata->caps2)
 		mmc->caps2 = host->pdata->caps2;
 
-	if (host->pdata->get_bus_wd)
-		bus_width = host->pdata->get_bus_wd(slot->id);
-	else if (host->dev->of_node)
-		bus_width = dw_mci_of_get_bus_wd(host->dev, slot->id);
-	else
-		bus_width = 1;
-
-	switch (bus_width) {
-	case 8:
-		mmc->caps |= MMC_CAP_8_BIT_DATA;
-	case 4:
-		mmc->caps |= MMC_CAP_4_BIT_DATA;
-	}
+	mmc_of_parse(mmc);
 
 	if (host->pdata->blk_settings) {
 		mmc->max_segs = host->pdata->blk_settings->max_segs;
@@ -2226,8 +2113,10 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
 #endif /* CONFIG_MMC_DW_IDMAC */
 	}
 
-	slot->wp_gpio = dw_mci_of_get_wp_gpio(host->dev, slot->id);
-	dw_mci_of_get_cd_gpio(host->dev, slot->id, mmc);
+	if (dw_mci_get_cd(mmc))
+		set_bit(DW_MMC_CARD_PRESENT, &slot->flags);
+	else
+		clear_bit(DW_MMC_CARD_PRESENT, &slot->flags);
 
 	ret = mmc_add_host(mmc);
 	if (ret)
@@ -2249,10 +2138,6 @@ err_setup_bus:
 
 static void dw_mci_cleanup_slot(struct dw_mci_slot *slot, unsigned int id)
 {
-	/* Shutdown detect IRQ */
-	if (slot->host->pdata->exit)
-		slot->host->pdata->exit(id);
-
 	/* Debugfs stuff is cleaned up by mmc core */
 	mmc_remove_host(slot->mmc);
 	slot->host->slot[id] = NULL;
@@ -2399,24 +2284,9 @@ static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
 			return ERR_PTR(ret);
 	}
 
-	if (of_find_property(np, "keep-power-in-suspend", NULL))
-		pdata->pm_caps |= MMC_PM_KEEP_POWER;
-
-	if (of_find_property(np, "enable-sdio-wakeup", NULL))
-		pdata->pm_caps |= MMC_PM_WAKE_SDIO_IRQ;
-
 	if (of_find_property(np, "supports-highspeed", NULL))
 		pdata->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;
 
-	if (of_find_property(np, "caps2-mmc-hs200-1_8v", NULL))
-		pdata->caps2 |= MMC_CAP2_HS200_1_8V_SDR;
-
-	if (of_find_property(np, "caps2-mmc-hs200-1_2v", NULL))
-		pdata->caps2 |= MMC_CAP2_HS200_1_2V_SDR;
-
-	if (of_get_property(np, "cd-inverted", NULL))
-		pdata->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH;
-
 	return pdata;
 }
 
@@ -2442,9 +2312,9 @@ int dw_mci_probe(struct dw_mci *host)
 		}
 	}
 
-	if (!host->pdata->select_slot && host->pdata->num_slots > 1) {
+	if (host->pdata->num_slots > 1) {
 		dev_err(host->dev,
-			"Platform data must supply select_slot function\n");
+			"Platform data must supply num_slots.\n");
 		return -ENODEV;
 	}
 
@@ -2474,12 +2344,19 @@ int dw_mci_probe(struct dw_mci *host)
 			ret = clk_set_rate(host->ciu_clk, host->pdata->bus_hz);
 			if (ret)
 				dev_warn(host->dev,
-					 "Unable to set bus rate to %ul\n",
+					 "Unable to set bus rate to %uHz\n",
 					 host->pdata->bus_hz);
 		}
 		host->bus_hz = clk_get_rate(host->ciu_clk);
 	}
 
+	if (!host->bus_hz) {
+		dev_err(host->dev,
+			"Platform data must supply bus speed\n");
+		ret = -ENODEV;
+		goto err_clk_ciu;
+	}
+
 	if (drv_data && drv_data->init) {
 		ret = drv_data->init(host);
 		if (ret) {
@@ -2516,13 +2393,6 @@ int dw_mci_probe(struct dw_mci *host)
 		}
 	}
 
-	if (!host->bus_hz) {
-		dev_err(host->dev,
-			"Platform data must supply bus speed\n");
-		ret = -ENODEV;
-		goto err_regulator;
-	}
-
 	host->quirks = host->pdata->quirks;
 
 	spin_lock_init(&host->lock);
@@ -2666,8 +2536,6 @@ err_workqueue:
 err_dmaunmap:
 	if (host->use_dma && host->dma_ops->exit)
 		host->dma_ops->exit(host);
-
-err_regulator:
 	if (host->vmmc)
 		regulator_disable(host->vmmc);
 

drivers/mmc/host/dw_mmc.h

@@ -195,7 +195,6 @@ extern int dw_mci_resume(struct dw_mci *host);
  * @mmc: The mmc_host representing this slot.
  * @host: The MMC controller this slot is using.
  * @quirks: Slot-level quirks (DW_MCI_SLOT_QUIRK_XXX)
- * @wp_gpio: If gpio_is_valid() we'll use this to read write protect.
  * @ctype: Card type for this slot.
  * @mrq: mmc_request currently being processed or waiting to be
  *	processed, or NULL when the slot is idle.
@@ -214,7 +213,6 @@ struct dw_mci_slot {
 	struct dw_mci		*host;
 
 	int			quirks;
-	int			wp_gpio;
 
 	u32			ctype;
 

drivers/mmc/host/jz4740_mmc.c

@@ -515,10 +515,13 @@ static irqreturn_t jz_mmc_irq_worker(int irq, void *devid)
 
 		jz4740_mmc_send_command(host, req->stop);
 
-		timeout = jz4740_mmc_poll_irq(host, JZ_MMC_IRQ_PRG_DONE);
-		if (timeout) {
-			host->state = JZ4740_MMC_STATE_DONE;
-			break;
+		if (mmc_resp_type(req->stop) & MMC_RSP_BUSY) {
+			timeout = jz4740_mmc_poll_irq(host,
+						      JZ_MMC_IRQ_PRG_DONE);
+			if (timeout) {
+				host->state = JZ4740_MMC_STATE_DONE;
+				break;
+			}
 		}
 	case JZ4740_MMC_STATE_DONE:
 		break;

drivers/mmc/host/mmci.c

@@ -301,7 +301,8 @@ static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired)
 	if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_8)
 		clk |= MCI_ST_8BIT_BUS;
 
-	if (host->mmc->ios.timing == MMC_TIMING_UHS_DDR50)
+	if (host->mmc->ios.timing == MMC_TIMING_UHS_DDR50 ||
+	    host->mmc->ios.timing == MMC_TIMING_MMC_DDR52)
 		clk |= MCI_ST_UX500_NEG_EDGE;
 
 	mmci_write_clkreg(host, clk);
@@ -764,7 +765,8 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
 			mmci_write_clkreg(host, clk);
 		}
 
-	if (host->mmc->ios.timing == MMC_TIMING_UHS_DDR50)
+	if (host->mmc->ios.timing == MMC_TIMING_UHS_DDR50 ||
+	    host->mmc->ios.timing == MMC_TIMING_MMC_DDR52)
 		datactrl |= MCI_ST_DPSM_DDRMODE;
 
 	/*

drivers/mmc/host/moxart-mmc.c

@@ -0,0 +1,730 @@
+/*
+ * MOXA ART MMC host driver.
+ *
+ * Copyright (C) 2014 Jonas Jensen
+ *
+ * Jonas Jensen <jonas.jensen@gmail.com>
+ *
+ * Based on code from
+ * Moxa Technologies Co., Ltd. <www.moxa.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/blkdev.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sd.h>
+#include <linux/sched.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/clk.h>
+#include <linux/bitops.h>
+#include <linux/of_dma.h>
+#include <linux/spinlock.h>
+
+#define REG_COMMAND		0
+#define REG_ARGUMENT		4
+#define REG_RESPONSE0		8
+#define REG_RESPONSE1		12
+#define REG_RESPONSE2		16
+#define REG_RESPONSE3		20
+#define REG_RESPONSE_COMMAND	24
+#define REG_DATA_CONTROL	28
+#define REG_DATA_TIMER		32
+#define REG_DATA_LENGTH		36
+#define REG_STATUS		40
+#define REG_CLEAR		44
+#define REG_INTERRUPT_MASK	48
+#define REG_POWER_CONTROL	52
+#define REG_CLOCK_CONTROL	56
+#define REG_BUS_WIDTH		60
+#define REG_DATA_WINDOW		64
+#define REG_FEATURE		68
+#define REG_REVISION		72
+
+/* REG_COMMAND */
+#define CMD_SDC_RESET		BIT(10)
+#define CMD_EN			BIT(9)
+#define CMD_APP_CMD		BIT(8)
+#define CMD_LONG_RSP		BIT(7)
+#define CMD_NEED_RSP		BIT(6)
+#define CMD_IDX_MASK		0x3f
+
+/* REG_RESPONSE_COMMAND */
+#define RSP_CMD_APP		BIT(6)
+#define RSP_CMD_IDX_MASK	0x3f
+
+/* REG_DATA_CONTROL */
+#define DCR_DATA_FIFO_RESET     BIT(8)
+#define DCR_DATA_THRES          BIT(7)
+#define DCR_DATA_EN		BIT(6)
+#define DCR_DMA_EN		BIT(5)
+#define DCR_DATA_WRITE		BIT(4)
+#define DCR_BLK_SIZE		0x0f
+
+/* REG_DATA_LENGTH */
+#define DATA_LEN_MASK		0xffffff
+
+/* REG_STATUS */
+#define WRITE_PROT		BIT(12)
+#define CARD_DETECT		BIT(11)
+/* 1-10 below can be sent to either registers, interrupt or clear. */
+#define CARD_CHANGE		BIT(10)
+#define FIFO_ORUN		BIT(9)
+#define FIFO_URUN		BIT(8)
+#define DATA_END		BIT(7)
+#define CMD_SENT		BIT(6)
+#define DATA_CRC_OK		BIT(5)
+#define RSP_CRC_OK		BIT(4)
+#define DATA_TIMEOUT		BIT(3)
+#define RSP_TIMEOUT		BIT(2)
+#define DATA_CRC_FAIL		BIT(1)
+#define RSP_CRC_FAIL		BIT(0)
+
+#define MASK_RSP		(RSP_TIMEOUT | RSP_CRC_FAIL | \
+				 RSP_CRC_OK  | CARD_DETECT  | CMD_SENT)
+
+#define MASK_DATA		(DATA_CRC_OK   | DATA_END | \
+				 DATA_CRC_FAIL | DATA_TIMEOUT)
+
+#define MASK_INTR_PIO		(FIFO_URUN | FIFO_ORUN | CARD_CHANGE)
+
+/* REG_POWER_CONTROL */
+#define SD_POWER_ON		BIT(4)
+#define SD_POWER_MASK		0x0f
+
+/* REG_CLOCK_CONTROL */
+#define CLK_HISPD		BIT(9)
+#define CLK_OFF			BIT(8)
+#define CLK_SD			BIT(7)
+#define CLK_DIV_MASK		0x7f
+
+/* REG_BUS_WIDTH */
+#define BUS_WIDTH_8		BIT(2)
+#define BUS_WIDTH_4		BIT(1)
+#define BUS_WIDTH_1		BIT(0)
+
+#define MMC_VDD_360		23
+#define MIN_POWER		(MMC_VDD_360 - SD_POWER_MASK)
+#define MAX_RETRIES		500000
+
+struct moxart_host {
+	spinlock_t			lock;
+
+	void __iomem			*base;
+
+	phys_addr_t			reg_phys;
+
+	struct dma_chan			*dma_chan_tx;
+	struct dma_chan                 *dma_chan_rx;
+	struct dma_async_tx_descriptor	*tx_desc;
+	struct mmc_host			*mmc;
+	struct mmc_request		*mrq;
+	struct scatterlist		*cur_sg;
+	struct completion		dma_complete;
+	struct completion		pio_complete;
+
+	u32				num_sg;
+	u32				data_remain;
+	u32				data_len;
+	u32				fifo_width;
+	u32				timeout;
+	u32				rate;
+
+	long				sysclk;
+
+	bool				have_dma;
+	bool				is_removed;
+};
+
+static inline void moxart_init_sg(struct moxart_host *host,
+				  struct mmc_data *data)
+{
+	host->cur_sg = data->sg;
+	host->num_sg = data->sg_len;
+	host->data_remain = host->cur_sg->length;
+
+	if (host->data_remain > host->data_len)
+		host->data_remain = host->data_len;
+}
+
+static inline int moxart_next_sg(struct moxart_host *host)
+{
+	int remain;
+	struct mmc_data *data = host->mrq->cmd->data;
+
+	host->cur_sg++;
+	host->num_sg--;
+
+	if (host->num_sg > 0) {
+		host->data_remain = host->cur_sg->length;
+		remain = host->data_len - data->bytes_xfered;
+		if (remain > 0 && remain < host->data_remain)
+			host->data_remain = remain;
+	}
+
+	return host->num_sg;
+}
+
+static int moxart_wait_for_status(struct moxart_host *host,
+				  u32 mask, u32 *status)
+{
+	int ret = -ETIMEDOUT;
+	u32 i;
+
+	for (i = 0; i < MAX_RETRIES; i++) {
+		*status = readl(host->base + REG_STATUS);
+		if (!(*status & mask)) {
+			udelay(5);
+			continue;
+		}
+		writel(*status & mask, host->base + REG_CLEAR);
+		ret = 0;
+		break;
+	}
+
+	if (ret)
+		dev_err(mmc_dev(host->mmc), "timed out waiting for status\n");
+
+	return ret;
+}
+
+
+static void moxart_send_command(struct moxart_host *host,
+	struct mmc_command *cmd)
+{
+	u32 status, cmdctrl;
+
+	writel(RSP_TIMEOUT  | RSP_CRC_OK |
+	       RSP_CRC_FAIL | CMD_SENT, host->base + REG_CLEAR);
+	writel(cmd->arg, host->base + REG_ARGUMENT);
+
+	cmdctrl = cmd->opcode & CMD_IDX_MASK;
+	if (cmdctrl == SD_APP_SET_BUS_WIDTH    || cmdctrl == SD_APP_OP_COND   ||
+	    cmdctrl == SD_APP_SEND_SCR         || cmdctrl == SD_APP_SD_STATUS ||
+	    cmdctrl == SD_APP_SEND_NUM_WR_BLKS)
+		cmdctrl |= CMD_APP_CMD;
+
+	if (cmd->flags & MMC_RSP_PRESENT)
+		cmdctrl |= CMD_NEED_RSP;
+
+	if (cmd->flags & MMC_RSP_136)
+		cmdctrl |= CMD_LONG_RSP;
+
+	writel(cmdctrl | CMD_EN, host->base + REG_COMMAND);
+
+	if (moxart_wait_for_status(host, MASK_RSP, &status) == -ETIMEDOUT)
+		cmd->error = -ETIMEDOUT;
+
+	if (status & RSP_TIMEOUT) {
+		cmd->error = -ETIMEDOUT;
+		return;
+	}
+	if (status & RSP_CRC_FAIL) {
+		cmd->error = -EIO;
+		return;
+	}
+	if (status & RSP_CRC_OK) {
+		if (cmd->flags & MMC_RSP_136) {
+			cmd->resp[3] = readl(host->base + REG_RESPONSE0);
+			cmd->resp[2] = readl(host->base + REG_RESPONSE1);
+			cmd->resp[1] = readl(host->base + REG_RESPONSE2);
+			cmd->resp[0] = readl(host->base + REG_RESPONSE3);
+		} else {
+			cmd->resp[0] = readl(host->base + REG_RESPONSE0);
+		}
+	}
+}
+
+static void moxart_dma_complete(void *param)
+{
+	struct moxart_host *host = param;
+
+	complete(&host->dma_complete);
+}
+
+static void moxart_transfer_dma(struct mmc_data *data, struct moxart_host *host)
+{
+	u32 len, dir_data, dir_slave;
+	unsigned long dma_time;
+	struct dma_async_tx_descriptor *desc = NULL;
+	struct dma_chan *dma_chan;
+
+	if (host->data_len == data->bytes_xfered)
+		return;
+
+	if (data->flags & MMC_DATA_WRITE) {
+		dma_chan = host->dma_chan_tx;
+		dir_data = DMA_TO_DEVICE;
+		dir_slave = DMA_MEM_TO_DEV;
+	} else {
+		dma_chan = host->dma_chan_rx;
+		dir_data = DMA_FROM_DEVICE;
+		dir_slave = DMA_DEV_TO_MEM;
+	}
+
+	len = dma_map_sg(dma_chan->device->dev, data->sg,
+			 data->sg_len, dir_data);
+
+	if (len > 0) {
+		desc = dmaengine_prep_slave_sg(dma_chan, data->sg,
+					       len, dir_slave,
+					       DMA_PREP_INTERRUPT |
+					       DMA_CTRL_ACK);
+	} else {
+		dev_err(mmc_dev(host->mmc), "dma_map_sg returned zero length\n");
+	}
+
+	if (desc) {
+		host->tx_desc = desc;
+		desc->callback = moxart_dma_complete;
+		desc->callback_param = host;
+		dmaengine_submit(desc);
+		dma_async_issue_pending(dma_chan);
+	}
+
+	data->bytes_xfered += host->data_remain;
+
+	dma_time = wait_for_completion_interruptible_timeout(
+		   &host->dma_complete, host->timeout);
+
+	dma_unmap_sg(dma_chan->device->dev,
+		     data->sg, data->sg_len,
+		     dir_data);
+}
+
+
+static void moxart_transfer_pio(struct moxart_host *host)
+{
+	struct mmc_data *data = host->mrq->cmd->data;
+	u32 *sgp, len = 0, remain, status;
+
+	if (host->data_len == data->bytes_xfered)
+		return;
+
+	sgp = sg_virt(host->cur_sg);
+	remain = host->data_remain;
+
+	if (data->flags & MMC_DATA_WRITE) {
+		while (remain > 0) {
+			if (moxart_wait_for_status(host, FIFO_URUN, &status)
+			     == -ETIMEDOUT) {
+				data->error = -ETIMEDOUT;
+				complete(&host->pio_complete);
+				return;
+			}
+			for (len = 0; len < remain && len < host->fifo_width;) {
+				iowrite32(*sgp, host->base + REG_DATA_WINDOW);
+				sgp++;
+				len += 4;
+			}
+			remain -= len;
+		}
+
+	} else {
+		while (remain > 0) {
+			if (moxart_wait_for_status(host, FIFO_ORUN, &status)
+			    == -ETIMEDOUT) {
+				data->error = -ETIMEDOUT;
+				complete(&host->pio_complete);
+				return;
+			}
+			for (len = 0; len < remain && len < host->fifo_width;) {
+				/* SCR data must be read in big endian. */
+				if (data->mrq->cmd->opcode == SD_APP_SEND_SCR)
+					*sgp = ioread32be(host->base +
+							  REG_DATA_WINDOW);
+				else
+					*sgp = ioread32(host->base +
+							REG_DATA_WINDOW);
+				sgp++;
+				len += 4;
+			}
+			remain -= len;
+		}
+	}
+
+	data->bytes_xfered += host->data_remain - remain;
+	host->data_remain = remain;
+
+	if (host->data_len != data->bytes_xfered)
+		moxart_next_sg(host);
+	else
+		complete(&host->pio_complete);
+}
+
+static void moxart_prepare_data(struct moxart_host *host)
+{
+	struct mmc_data *data = host->mrq->cmd->data;
+	u32 datactrl;
+	int blksz_bits;
+
+	if (!data)
+		return;
+
+	host->data_len = data->blocks * data->blksz;
+	blksz_bits = ffs(data->blksz) - 1;
+	BUG_ON(1 << blksz_bits != data->blksz);
+
+	moxart_init_sg(host, data);
+
+	datactrl = DCR_DATA_EN | (blksz_bits & DCR_BLK_SIZE);
+
+	if (data->flags & MMC_DATA_WRITE)
+		datactrl |= DCR_DATA_WRITE;
+
+	if ((host->data_len > host->fifo_width) && host->have_dma)
+		datactrl |= DCR_DMA_EN;
+
+	writel(DCR_DATA_FIFO_RESET, host->base + REG_DATA_CONTROL);
+	writel(MASK_DATA | FIFO_URUN | FIFO_ORUN, host->base + REG_CLEAR);
+	writel(host->rate, host->base + REG_DATA_TIMER);
+	writel(host->data_len, host->base + REG_DATA_LENGTH);
+	writel(datactrl, host->base + REG_DATA_CONTROL);
+}
+
+static void moxart_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	struct moxart_host *host = mmc_priv(mmc);
+	unsigned long pio_time, flags;
+	u32 status;
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	init_completion(&host->dma_complete);
+	init_completion(&host->pio_complete);
+
+	host->mrq = mrq;
+
+	if (readl(host->base + REG_STATUS) & CARD_DETECT) {
+		mrq->cmd->error = -ETIMEDOUT;
+		goto request_done;
+	}
+
+	moxart_prepare_data(host);
+	moxart_send_command(host, host->mrq->cmd);
+
+	if (mrq->cmd->data) {
+		if ((host->data_len > host->fifo_width) && host->have_dma) {
+
+			writel(CARD_CHANGE, host->base + REG_INTERRUPT_MASK);
+
+			spin_unlock_irqrestore(&host->lock, flags);
+
+			moxart_transfer_dma(mrq->cmd->data, host);
+
+			spin_lock_irqsave(&host->lock, flags);
+		} else {
+
+			writel(MASK_INTR_PIO, host->base + REG_INTERRUPT_MASK);
+
+			spin_unlock_irqrestore(&host->lock, flags);
+
+			/* PIO transfers start from interrupt. */
+			pio_time = wait_for_completion_interruptible_timeout(
+				   &host->pio_complete, host->timeout);
+
+			spin_lock_irqsave(&host->lock, flags);
+		}
+
+		if (host->is_removed) {
+			dev_err(mmc_dev(host->mmc), "card removed\n");
+			mrq->cmd->error = -ETIMEDOUT;
+			goto request_done;
+		}
+
+		if (moxart_wait_for_status(host, MASK_DATA, &status)
+		    == -ETIMEDOUT) {
+			mrq->cmd->data->error = -ETIMEDOUT;
+			goto request_done;
+		}
+
+		if (status & DATA_CRC_FAIL)
+			mrq->cmd->data->error = -ETIMEDOUT;
+
+		if (mrq->cmd->data->stop)
+			moxart_send_command(host, mrq->cmd->data->stop);
+	}
+
+request_done:
+	spin_unlock_irqrestore(&host->lock, flags);
+	mmc_request_done(host->mmc, mrq);
+}
+
+static irqreturn_t moxart_irq(int irq, void *devid)
+{
+	struct moxart_host *host = (struct moxart_host *)devid;
+	u32 status;
+	unsigned long flags;
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	status = readl(host->base + REG_STATUS);
+	if (status & CARD_CHANGE) {
+		host->is_removed = status & CARD_DETECT;
+		if (host->is_removed && host->have_dma) {
+			dmaengine_terminate_all(host->dma_chan_tx);
+			dmaengine_terminate_all(host->dma_chan_rx);
+		}
+		host->mrq = NULL;
+		writel(MASK_INTR_PIO, host->base + REG_CLEAR);
+		writel(CARD_CHANGE, host->base + REG_INTERRUPT_MASK);
+		mmc_detect_change(host->mmc, 0);
+	}
+	if (status & (FIFO_ORUN | FIFO_URUN) && host->mrq)
+		moxart_transfer_pio(host);
+
+	spin_unlock_irqrestore(&host->lock, flags);
+
+	return IRQ_HANDLED;
+}
+
+static void moxart_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct moxart_host *host = mmc_priv(mmc);
+	unsigned long flags;
+	u8 power, div;
+	u32 ctrl;
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	if (ios->clock) {
+		for (div = 0; div < CLK_DIV_MASK; ++div) {
+			if (ios->clock >= host->sysclk / (2 * (div + 1)))
+				break;
+		}
+		ctrl = CLK_SD | div;
+		host->rate = host->sysclk / (2 * (div + 1));
+		if (host->rate > host->sysclk)
+			ctrl |= CLK_HISPD;
+		writel(ctrl, host->base + REG_CLOCK_CONTROL);
+	}
+
+	if (ios->power_mode == MMC_POWER_OFF) {
+		writel(readl(host->base + REG_POWER_CONTROL) & ~SD_POWER_ON,
+		       host->base + REG_POWER_CONTROL);
+	} else {
+		if (ios->vdd < MIN_POWER)
+			power = 0;
+		else
+			power = ios->vdd - MIN_POWER;
+
+		writel(SD_POWER_ON | (u32) power,
+		       host->base + REG_POWER_CONTROL);
+	}
+
+	switch (ios->bus_width) {
+	case MMC_BUS_WIDTH_4:
+		writel(BUS_WIDTH_4, host->base + REG_BUS_WIDTH);
+		break;
+	case MMC_BUS_WIDTH_8:
+		writel(BUS_WIDTH_8, host->base + REG_BUS_WIDTH);
+		break;
+	default:
+		writel(BUS_WIDTH_1, host->base + REG_BUS_WIDTH);
+		break;
+	}
+
+	spin_unlock_irqrestore(&host->lock, flags);
+}
+
+
+static int moxart_get_ro(struct mmc_host *mmc)
+{
+	struct moxart_host *host = mmc_priv(mmc);
+
+	return !!(readl(host->base + REG_STATUS) & WRITE_PROT);
+}
+
+static struct mmc_host_ops moxart_ops = {
+	.request = moxart_request,
+	.set_ios = moxart_set_ios,
+	.get_ro = moxart_get_ro,
+};
+
+static int moxart_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *node = dev->of_node;
+	struct resource res_mmc;
+	struct mmc_host *mmc;
+	struct moxart_host *host = NULL;
+	struct dma_slave_config cfg;
+	struct clk *clk;
+	void __iomem *reg_mmc;
+	dma_cap_mask_t mask;
+	int irq, ret;
+	u32 i;
+
+	mmc = mmc_alloc_host(sizeof(struct moxart_host), dev);
+	if (!mmc) {
+		dev_err(dev, "mmc_alloc_host failed\n");
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	ret = of_address_to_resource(node, 0, &res_mmc);
+	if (ret) {
+		dev_err(dev, "of_address_to_resource failed\n");
+		goto out;
+	}
+
+	irq = irq_of_parse_and_map(node, 0);
+	if (irq <= 0) {
+		dev_err(dev, "irq_of_parse_and_map failed\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	clk = of_clk_get(node, 0);
+	if (IS_ERR(clk)) {
+		dev_err(dev, "of_clk_get failed\n");
+		ret = PTR_ERR(clk);
+		goto out;
+	}
+
+	reg_mmc = devm_ioremap_resource(dev, &res_mmc);
+	if (IS_ERR(reg_mmc)) {
+		ret = PTR_ERR(reg_mmc);
+		goto out;
+	}
+
+	mmc_of_parse(mmc);
+
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
+
+	host = mmc_priv(mmc);
+	host->mmc = mmc;
+	host->base = reg_mmc;
+	host->reg_phys = res_mmc.start;
+	host->timeout = msecs_to_jiffies(1000);
+	host->sysclk = clk_get_rate(clk);
+	host->fifo_width = readl(host->base + REG_FEATURE) << 2;
+	host->dma_chan_tx = of_dma_request_slave_channel(node, "tx");
+	host->dma_chan_rx = of_dma_request_slave_channel(node, "rx");
+
+	spin_lock_init(&host->lock);
+
+	mmc->ops = &moxart_ops;
+	mmc->f_max = DIV_ROUND_CLOSEST(host->sysclk, 2);
+	mmc->f_min = DIV_ROUND_CLOSEST(host->sysclk, CLK_DIV_MASK * 2);
+	mmc->ocr_avail = 0xffff00;	/* Support 2.0v - 3.6v power. */
+
+	if (IS_ERR(host->dma_chan_tx) || IS_ERR(host->dma_chan_rx)) {
+		dev_dbg(dev, "PIO mode transfer enabled\n");
+		host->have_dma = false;
+	} else {
+		dev_dbg(dev, "DMA channels found (%p,%p)\n",
+			 host->dma_chan_tx, host->dma_chan_rx);
+		host->have_dma = true;
+
+		cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+		cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+
+		cfg.direction = DMA_MEM_TO_DEV;
+		cfg.src_addr = 0;
+		cfg.dst_addr = host->reg_phys + REG_DATA_WINDOW;
+		dmaengine_slave_config(host->dma_chan_tx, &cfg);
+
+		cfg.direction = DMA_DEV_TO_MEM;
+		cfg.src_addr = host->reg_phys + REG_DATA_WINDOW;
+		cfg.dst_addr = 0;
+		dmaengine_slave_config(host->dma_chan_rx, &cfg);
+	}
+
+	switch ((readl(host->base + REG_BUS_WIDTH) >> 3) & 3) {
+	case 1:
+		mmc->caps |= MMC_CAP_4_BIT_DATA;
+		break;
+	case 2:
+		mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA;
+		break;
+	default:
+		break;
+	}
+
+	writel(0, host->base + REG_INTERRUPT_MASK);
+
+	writel(CMD_SDC_RESET, host->base + REG_COMMAND);
+	for (i = 0; i < MAX_RETRIES; i++) {
+		if (!(readl(host->base + REG_COMMAND) & CMD_SDC_RESET))
+			break;
+		udelay(5);
+	}
+
+	ret = devm_request_irq(dev, irq, moxart_irq, 0, "moxart-mmc", host);
+	if (ret)
+		goto out;
+
+	dev_set_drvdata(dev, mmc);
+	mmc_add_host(mmc);
+
+	dev_dbg(dev, "IRQ=%d, FIFO is %d bytes\n", irq, host->fifo_width);
+
+	return 0;
+
+out:
+	if (mmc)
+		mmc_free_host(mmc);
+	return ret;
+}
+
+static int moxart_remove(struct platform_device *pdev)
+{
+	struct mmc_host *mmc = dev_get_drvdata(&pdev->dev);
+	struct moxart_host *host = mmc_priv(mmc);
+
+	dev_set_drvdata(&pdev->dev, NULL);
+
+	if (mmc) {
+		if (!IS_ERR(host->dma_chan_tx))
+			dma_release_channel(host->dma_chan_tx);
+		if (!IS_ERR(host->dma_chan_rx))
+			dma_release_channel(host->dma_chan_rx);
+		mmc_remove_host(mmc);
+		mmc_free_host(mmc);
+
+		writel(0, host->base + REG_INTERRUPT_MASK);
+		writel(0, host->base + REG_POWER_CONTROL);
+		writel(readl(host->base + REG_CLOCK_CONTROL) | CLK_OFF,
+		       host->base + REG_CLOCK_CONTROL);
+	}
+
+	kfree(host);
+
+	return 0;
+}
+
+static const struct of_device_id moxart_mmc_match[] = {
+	{ .compatible = "moxa,moxart-mmc" },
+	{ .compatible = "faraday,ftsdc010" },
+	{ }
+};
+
+static struct platform_driver moxart_mmc_driver = {
+	.probe      = moxart_probe,
+	.remove     = moxart_remove,
+	.driver     = {
+		.name		= "mmc-moxart",
+		.owner		= THIS_MODULE,
+		.of_match_table	= moxart_mmc_match,
+	},
+};
+module_platform_driver(moxart_mmc_driver);
+
+MODULE_ALIAS("platform:mmc-moxart");
+MODULE_DESCRIPTION("MOXA ART MMC driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Jonas Jensen <jonas.jensen@gmail.com>");

drivers/mmc/host/mvsdio.c

@@ -354,6 +354,20 @@ static irqreturn_t mvsd_irq(int irq, void *dev)
 		intr_status, mvsd_read(MVSD_NOR_INTR_EN),
 		mvsd_read(MVSD_HW_STATE));
 
+	/*
+	 * It looks like, SDIO IP can issue one late, spurious irq
+	 * although all irqs should be disabled. To work around this,
+	 * bail out early, if we didn't expect any irqs to occur.
+	 */
+	if (!mvsd_read(MVSD_NOR_INTR_EN) && !mvsd_read(MVSD_ERR_INTR_EN)) {
+		dev_dbg(host->dev, "spurious irq detected intr 0x%04x intr_en 0x%04x erri 0x%04x erri_en 0x%04x\n",
+			mvsd_read(MVSD_NOR_INTR_STATUS),
+			mvsd_read(MVSD_NOR_INTR_EN),
+			mvsd_read(MVSD_ERR_INTR_STATUS),
+			mvsd_read(MVSD_ERR_INTR_EN));
+		return IRQ_HANDLED;
+	}
+
 	spin_lock(&host->lock);
 
 	/* PIO handling, if needed. Messy business... */
@@ -801,10 +815,10 @@ static int mvsd_probe(struct platform_device *pdev)
 		goto out;
 
 	if (!(mmc->caps & MMC_CAP_NEEDS_POLL))
-		dev_notice(&pdev->dev, "using GPIO for card detection\n");
+		dev_dbg(&pdev->dev, "using GPIO for card detection\n");
 	else
-		dev_notice(&pdev->dev,
-			   "lacking card detect (fall back to polling)\n");
+		dev_dbg(&pdev->dev, "lacking card detect (fall back to polling)\n");
+
 	return 0;
 
 out:

drivers/mmc/host/mxcmmc.c

@@ -124,9 +124,8 @@ enum mxcmci_type {
 
 struct mxcmci_host {
 	struct mmc_host		*mmc;
-	struct resource		*res;
 	void __iomem		*base;
-	int			irq;
+	dma_addr_t		phys_base;
 	int			detect_irq;
 	struct dma_chan		*dma;
 	struct dma_async_tx_descriptor *desc;
@@ -154,8 +153,6 @@ struct mxcmci_host {
 	struct work_struct	datawork;
 	spinlock_t		lock;
 
-	struct regulator	*vcc;
-
 	int			burstlen;
 	int			dmareq;
 	struct dma_slave_config dma_slave_config;
@@ -241,37 +238,15 @@ static inline void mxcmci_writew(struct mxcmci_host *host, u16 val, int reg)
 
 static void mxcmci_set_clk_rate(struct mxcmci_host *host, unsigned int clk_ios);
 
-static inline void mxcmci_init_ocr(struct mxcmci_host *host)
-{
-	host->vcc = regulator_get(mmc_dev(host->mmc), "vmmc");
-
-	if (IS_ERR(host->vcc)) {
-		host->vcc = NULL;
-	} else {
-		host->mmc->ocr_avail = mmc_regulator_get_ocrmask(host->vcc);
-		if (host->pdata && host->pdata->ocr_avail)
-			dev_warn(mmc_dev(host->mmc),
-				"pdata->ocr_avail will not be used\n");
-	}
-
-	if (host->vcc == NULL) {
-		/* fall-back to platform data */
-		if (host->pdata && host->pdata->ocr_avail)
-			host->mmc->ocr_avail = host->pdata->ocr_avail;
-		else
-			host->mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
-	}
-}
-
-static inline void mxcmci_set_power(struct mxcmci_host *host,
-				    unsigned char power_mode,
-				    unsigned int vdd)
+static void mxcmci_set_power(struct mxcmci_host *host, unsigned int vdd)
 {
-	if (host->vcc) {
-		if (power_mode == MMC_POWER_UP)
-			mmc_regulator_set_ocr(host->mmc, host->vcc, vdd);
-		else if (power_mode == MMC_POWER_OFF)
-			mmc_regulator_set_ocr(host->mmc, host->vcc, 0);
+	if (!IS_ERR(host->mmc->supply.vmmc)) {
+		if (host->power_mode == MMC_POWER_UP)
+			mmc_regulator_set_ocr(host->mmc,
+					      host->mmc->supply.vmmc, vdd);
+		else if (host->power_mode == MMC_POWER_OFF)
+			mmc_regulator_set_ocr(host->mmc,
+					      host->mmc->supply.vmmc, 0);
 	}
 
 	if (host->pdata && host->pdata->setpower)
@@ -299,7 +274,6 @@ static void mxcmci_softreset(struct mxcmci_host *host)
 
 	mxcmci_writew(host, 0xff, MMC_REG_RES_TO);
 }
-static int mxcmci_setup_dma(struct mmc_host *mmc);
 
 #if IS_ENABLED(CONFIG_PPC_MPC512x)
 static inline void buffer_swap32(u32 *buf, int len)
@@ -868,8 +842,8 @@ static int mxcmci_setup_dma(struct mmc_host *mmc)
 	struct mxcmci_host *host = mmc_priv(mmc);
 	struct dma_slave_config *config = &host->dma_slave_config;
 
-	config->dst_addr = host->res->start + MMC_REG_BUFFER_ACCESS;
-	config->src_addr = host->res->start + MMC_REG_BUFFER_ACCESS;
+	config->dst_addr = host->phys_base + MMC_REG_BUFFER_ACCESS;
+	config->src_addr = host->phys_base + MMC_REG_BUFFER_ACCESS;
 	config->dst_addr_width = 4;
 	config->src_addr_width = 4;
 	config->dst_maxburst = host->burstlen;
@@ -911,8 +885,8 @@ static void mxcmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 		host->cmdat &= ~CMD_DAT_CONT_BUS_WIDTH_4;
 
 	if (host->power_mode != ios->power_mode) {
-		mxcmci_set_power(host, ios->power_mode, ios->vdd);
 		host->power_mode = ios->power_mode;
+		mxcmci_set_power(host, ios->vdd);
 
 		if (ios->power_mode == MMC_POWER_ON)
 			host->cmdat |= CMD_DAT_CONT_INIT;
@@ -1040,8 +1014,8 @@ static const struct mmc_host_ops mxcmci_ops = {
 static int mxcmci_probe(struct platform_device *pdev)
 {
 	struct mmc_host *mmc;
-	struct mxcmci_host *host = NULL;
-	struct resource *iores, *r;
+	struct mxcmci_host *host;
+	struct resource *res;
 	int ret = 0, irq;
 	bool dat3_card_detect = false;
 	dma_cap_mask_t mask;
@@ -1052,21 +1026,25 @@ static int mxcmci_probe(struct platform_device *pdev)
 
 	of_id = of_match_device(mxcmci_of_match, &pdev->dev);
 
-	iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	irq = platform_get_irq(pdev, 0);
-	if (!iores || irq < 0)
+	if (irq < 0)
 		return -EINVAL;
 
-	r = request_mem_region(iores->start, resource_size(iores), pdev->name);
-	if (!r)
-		return -EBUSY;
+	mmc = mmc_alloc_host(sizeof(*host), &pdev->dev);
+	if (!mmc)
+		return -ENOMEM;
+
+	host = mmc_priv(mmc);
 
-	mmc = mmc_alloc_host(sizeof(struct mxcmci_host), &pdev->dev);
-	if (!mmc) {
-		ret = -ENOMEM;
-		goto out_release_mem;
+	host->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(host->base)) {
+		ret = PTR_ERR(host->base);
+		goto out_free;
 	}
 
+	host->phys_base = res->start;
+
 	ret = mmc_of_parse(mmc);
 	if (ret)
 		goto out_free;
@@ -1084,13 +1062,6 @@ static int mxcmci_probe(struct platform_device *pdev)
 	mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
 	mmc->max_seg_size = mmc->max_req_size;
 
-	host = mmc_priv(mmc);
-	host->base = ioremap(r->start, resource_size(r));
-	if (!host->base) {
-		ret = -ENOMEM;
-		goto out_free;
-	}
-
 	if (of_id) {
 		const struct platform_device_id *id_entry = of_id->data;
 		host->devtype = id_entry->driver_data;
@@ -1112,7 +1083,14 @@ static int mxcmci_probe(struct platform_device *pdev)
 			&& !of_property_read_bool(pdev->dev.of_node, "cd-gpios"))
 		dat3_card_detect = true;
 
-	mxcmci_init_ocr(host);
+	ret = mmc_regulator_get_supply(mmc);
+	if (ret) {
+		if (pdata && ret != -EPROBE_DEFER)
+			mmc->ocr_avail = pdata->ocr_avail ? :
+				MMC_VDD_32_33 | MMC_VDD_33_34;
+		else
+			goto out_free;
+	}
 
 	if (dat3_card_detect)
 		host->default_irq_mask =
@@ -1120,19 +1098,16 @@ static int mxcmci_probe(struct platform_device *pdev)
 	else
 		host->default_irq_mask = 0;
 
-	host->res = r;
-	host->irq = irq;
-
 	host->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
 	if (IS_ERR(host->clk_ipg)) {
 		ret = PTR_ERR(host->clk_ipg);
-		goto out_iounmap;
+		goto out_free;
 	}
 
 	host->clk_per = devm_clk_get(&pdev->dev, "per");
 	if (IS_ERR(host->clk_per)) {
 		ret = PTR_ERR(host->clk_per);
-		goto out_iounmap;
+		goto out_free;
 	}
 
 	clk_prepare_enable(host->clk_per);
@@ -1159,9 +1134,9 @@ static int mxcmci_probe(struct platform_device *pdev)
 	if (!host->pdata) {
 		host->dma = dma_request_slave_channel(&pdev->dev, "rx-tx");
 	} else {
-		r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
-		if (r) {
-			host->dmareq = r->start;
+		res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+		if (res) {
+			host->dmareq = res->start;
 			host->dma_data.peripheral_type = IMX_DMATYPE_SDHC;
 			host->dma_data.priority = DMA_PRIO_LOW;
 			host->dma_data.dma_request = host->dmareq;
@@ -1178,7 +1153,8 @@ static int mxcmci_probe(struct platform_device *pdev)
 
 	INIT_WORK(&host->datawork, mxcmci_datawork);
 
-	ret = request_irq(host->irq, mxcmci_irq, 0, DRIVER_NAME, host);
+	ret = devm_request_irq(&pdev->dev, irq, mxcmci_irq, 0,
+			       dev_name(&pdev->dev), host);
 	if (ret)
 		goto out_free_dma;
 
@@ -1188,7 +1164,7 @@ static int mxcmci_probe(struct platform_device *pdev)
 		ret = host->pdata->init(&pdev->dev, mxcmci_detect_irq,
 				host->mmc);
 		if (ret)
-			goto out_free_irq;
+			goto out_free_dma;
 	}
 
 	init_timer(&host->watchdog);
@@ -1199,20 +1175,17 @@ static int mxcmci_probe(struct platform_device *pdev)
 
 	return 0;
 
-out_free_irq:
-	free_irq(host->irq, host);
 out_free_dma:
 	if (host->dma)
 		dma_release_channel(host->dma);
+
 out_clk_put:
 	clk_disable_unprepare(host->clk_per);
 	clk_disable_unprepare(host->clk_ipg);
-out_iounmap:
-	iounmap(host->base);
+
 out_free:
 	mmc_free_host(mmc);
-out_release_mem:
-	release_mem_region(iores->start, resource_size(iores));
+
 	return ret;
 }
 
@@ -1223,30 +1196,21 @@ static int mxcmci_remove(struct platform_device *pdev)
 
 	mmc_remove_host(mmc);
 
-	if (host->vcc)
-		regulator_put(host->vcc);
-
 	if (host->pdata && host->pdata->exit)
 		host->pdata->exit(&pdev->dev, mmc);
 
-	free_irq(host->irq, host);
-	iounmap(host->base);
-
 	if (host->dma)
 		dma_release_channel(host->dma);
 
 	clk_disable_unprepare(host->clk_per);
 	clk_disable_unprepare(host->clk_ipg);
 
-	release_mem_region(host->res->start, resource_size(host->res));
-
 	mmc_free_host(mmc);
 
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static int mxcmci_suspend(struct device *dev)
+static int __maybe_unused mxcmci_suspend(struct device *dev)
 {
 	struct mmc_host *mmc = dev_get_drvdata(dev);
 	struct mxcmci_host *host = mmc_priv(mmc);
@@ -1256,7 +1220,7 @@ static int mxcmci_suspend(struct device *dev)
 	return 0;
 }
 
-static int mxcmci_resume(struct device *dev)
+static int __maybe_unused mxcmci_resume(struct device *dev)
 {
 	struct mmc_host *mmc = dev_get_drvdata(dev);
 	struct mxcmci_host *host = mmc_priv(mmc);
@@ -1266,11 +1230,7 @@ static int mxcmci_resume(struct device *dev)
 	return 0;
 }
 
-static const struct dev_pm_ops mxcmci_pm_ops = {
-	.suspend	= mxcmci_suspend,
-	.resume		= mxcmci_resume,
-};
-#endif
+static SIMPLE_DEV_PM_OPS(mxcmci_pm_ops, mxcmci_suspend, mxcmci_resume);
 
 static struct platform_driver mxcmci_driver = {
 	.probe		= mxcmci_probe,
@@ -1279,9 +1239,7 @@ static struct platform_driver mxcmci_driver = {
 	.driver		= {
 		.name		= DRIVER_NAME,
 		.owner		= THIS_MODULE,
-#ifdef CONFIG_PM
 		.pm	= &mxcmci_pm_ops,
-#endif
 		.of_match_table	= mxcmci_of_match,
 	}
 };

drivers/mmc/host/mxs-mmc.c

@@ -70,6 +70,7 @@ struct mxs_mmc_host {
 	unsigned char			bus_width;
 	spinlock_t			lock;
 	int				sdio_irq_en;
+	bool				broken_cd;
 };
 
 static int mxs_mmc_get_cd(struct mmc_host *mmc)
@@ -78,6 +79,9 @@ static int mxs_mmc_get_cd(struct mmc_host *mmc)
 	struct mxs_ssp *ssp = &host->ssp;
 	int present, ret;
 
+	if (host->broken_cd)
+		return -ENOSYS;
+
 	ret = mmc_gpio_get_cd(mmc);
 	if (ret >= 0)
 		return ret;
@@ -568,6 +572,7 @@ static int mxs_mmc_probe(struct platform_device *pdev)
 {
 	const struct of_device_id *of_id =
 			of_match_device(mxs_mmc_dt_ids, &pdev->dev);
+	struct device_node *np = pdev->dev.of_node;
 	struct mxs_mmc_host *host;
 	struct mmc_host *mmc;
 	struct resource *iores;
@@ -634,6 +639,8 @@ static int mxs_mmc_probe(struct platform_device *pdev)
 	mmc->caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED |
 		    MMC_CAP_SDIO_IRQ | MMC_CAP_NEEDS_POLL;
 
+	host->broken_cd = of_property_read_bool(np, "broken-cd");
+
 	mmc->f_min = 400000;
 	mmc->f_max = 288000000;
 

drivers/mmc/host/omap.c

@@ -177,7 +177,7 @@ static void mmc_omap_fclk_offdelay(struct mmc_omap_slot *slot)
 	unsigned long tick_ns;
 
 	if (slot != NULL && slot->host->fclk_enabled && slot->fclk_freq > 0) {
-		tick_ns = (1000000000 + slot->fclk_freq - 1) / slot->fclk_freq;
+		tick_ns = DIV_ROUND_UP(NSEC_PER_SEC, slot->fclk_freq);
 		ndelay(8 * tick_ns);
 	}
 }
@@ -435,7 +435,7 @@ static void mmc_omap_send_stop_work(struct work_struct *work)
 	struct mmc_data *data = host->stop_data;
 	unsigned long tick_ns;
 
-	tick_ns = (1000000000 + slot->fclk_freq - 1)/slot->fclk_freq;
+	tick_ns = DIV_ROUND_UP(NSEC_PER_SEC, slot->fclk_freq);
 	ndelay(8*tick_ns);
 
 	mmc_omap_start_command(host, data->stop);
@@ -477,7 +477,7 @@ mmc_omap_send_abort(struct mmc_omap_host *host, int maxloops)
 	u16 stat = 0;
 
 	/* Sending abort takes 80 clocks. Have some extra and round up */
-	timeout = (120*1000000 + slot->fclk_freq - 1)/slot->fclk_freq;
+	timeout = DIV_ROUND_UP(120 * USEC_PER_SEC, slot->fclk_freq);
 	restarts = 0;
 	while (restarts < maxloops) {
 		OMAP_MMC_WRITE(host, STAT, 0xFFFF);
@@ -677,8 +677,8 @@ mmc_omap_xfer_data(struct mmc_omap_host *host, int write)
 	if (n > host->buffer_bytes_left)
 		n = host->buffer_bytes_left;
 
-	nwords = n / 2;
-	nwords += n & 1; /* handle odd number of bytes to transfer */
+	/* Round up to handle odd number of bytes to transfer */
+	nwords = DIV_ROUND_UP(n, 2);
 
 	host->buffer_bytes_left -= n;
 	host->total_bytes_left -= n;

drivers/mmc/host/omap_hsmmc.c

@@ -31,7 +31,7 @@
 #include <linux/of.h>
 #include <linux/of_gpio.h>
 #include <linux/of_device.h>
-#include <linux/omap-dma.h>
+#include <linux/omap-dmaengine.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/core.h>
 #include <linux/mmc/mmc.h>
@@ -582,7 +582,7 @@ static void omap_hsmmc_set_clock(struct omap_hsmmc_host *host)
 	 *	- MMC/SD clock coming out of controller > 25MHz
 	 */
 	if ((mmc_slot(host).features & HSMMC_HAS_HSPE_SUPPORT) &&
-	    (ios->timing != MMC_TIMING_UHS_DDR50) &&
+	    (ios->timing != MMC_TIMING_MMC_DDR52) &&
 	    ((OMAP_HSMMC_READ(host->base, CAPA) & HSS) == HSS)) {
 		regval = OMAP_HSMMC_READ(host->base, HCTL);
 		if (clkdiv && (clk_get_rate(host->fclk)/clkdiv) > 25000000)
@@ -602,7 +602,7 @@ static void omap_hsmmc_set_bus_width(struct omap_hsmmc_host *host)
 	u32 con;
 
 	con = OMAP_HSMMC_READ(host->base, CON);
-	if (ios->timing == MMC_TIMING_UHS_DDR50)
+	if (ios->timing == MMC_TIMING_MMC_DDR52)
 		con |= DDR;	/* configure in DDR mode */
 	else
 		con &= ~DDR;
@@ -920,16 +920,17 @@ omap_hsmmc_xfer_done(struct omap_hsmmc_host *host, struct mmc_data *data)
 static void
 omap_hsmmc_cmd_done(struct omap_hsmmc_host *host, struct mmc_command *cmd)
 {
-	host->cmd = NULL;
-
 	if (host->mrq->sbc && (host->cmd == host->mrq->sbc) &&
 	    !host->mrq->sbc->error && !(host->flags & AUTO_CMD23)) {
+		host->cmd = NULL;
 		omap_hsmmc_start_dma_transfer(host);
 		omap_hsmmc_start_command(host, host->mrq->cmd,
 						host->mrq->data);
 		return;
 	}
 
+	host->cmd = NULL;
+
 	if (cmd->flags & MMC_RSP_PRESENT) {
 		if (cmd->flags & MMC_RSP_136) {
 			/* response type 2 */
@@ -1851,6 +1852,7 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
 	unsigned tx_req, rx_req;
 	struct pinctrl *pinctrl;
 	const struct omap_mmc_of_data *data;
+	void __iomem *base;
 
 	match = of_match_device(of_match_ptr(omap_mmc_of_match), &pdev->dev);
 	if (match) {
@@ -1881,9 +1883,9 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
 	if (res == NULL || irq < 0)
 		return -ENXIO;
 
-	res = request_mem_region(res->start, resource_size(res), pdev->name);
-	if (res == NULL)
-		return -EBUSY;
+	base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
 
 	ret = omap_hsmmc_gpio_init(pdata);
 	if (ret)
@@ -1904,7 +1906,7 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
 	host->irq	= irq;
 	host->slot_id	= 0;
 	host->mapbase	= res->start + pdata->reg_offset;
-	host->base	= ioremap(host->mapbase, SZ_4K);
+	host->base	= base + pdata->reg_offset;
 	host->power_mode = MMC_POWER_OFF;
 	host->next_data.cookie = 1;
 	host->pbias_enabled = 0;
@@ -1922,7 +1924,7 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
 
 	spin_lock_init(&host->irq_lock);
 
-	host->fclk = clk_get(&pdev->dev, "fck");
+	host->fclk = devm_clk_get(&pdev->dev, "fck");
 	if (IS_ERR(host->fclk)) {
 		ret = PTR_ERR(host->fclk);
 		host->fclk = NULL;
@@ -1941,7 +1943,7 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
 
 	omap_hsmmc_context_save(host);
 
-	host->dbclk = clk_get(&pdev->dev, "mmchsdb_fck");
+	host->dbclk = devm_clk_get(&pdev->dev, "mmchsdb_fck");
 	/*
 	 * MMC can still work without debounce clock.
 	 */
@@ -1949,7 +1951,6 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
 		host->dbclk = NULL;
 	} else if (clk_prepare_enable(host->dbclk) != 0) {
 		dev_warn(mmc_dev(host->mmc), "Failed to enable debounce clk\n");
-		clk_put(host->dbclk);
 		host->dbclk = NULL;
 	}
 
@@ -2018,7 +2019,7 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
 	}
 
 	/* Request IRQ for MMC operations */
-	ret = request_irq(host->irq, omap_hsmmc_irq, 0,
+	ret = devm_request_irq(&pdev->dev, host->irq, omap_hsmmc_irq, 0,
 			mmc_hostname(mmc), host);
 	if (ret) {
 		dev_err(mmc_dev(host->mmc), "Unable to grab HSMMC IRQ\n");
@@ -2029,7 +2030,7 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
 		if (pdata->init(&pdev->dev) != 0) {
 			dev_err(mmc_dev(host->mmc),
 				"Unable to configure MMC IRQs\n");
-			goto err_irq_cd_init;
+			goto err_irq;
 		}
 	}
 
@@ -2044,9 +2045,9 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
 
 	/* Request IRQ for card detect */
 	if ((mmc_slot(host).card_detect_irq)) {
-		ret = request_threaded_irq(mmc_slot(host).card_detect_irq,
-					   NULL,
-					   omap_hsmmc_detect,
+		ret = devm_request_threaded_irq(&pdev->dev,
+						mmc_slot(host).card_detect_irq,
+						NULL, omap_hsmmc_detect,
 					   IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
 					   mmc_hostname(mmc), host);
 		if (ret) {
@@ -2089,15 +2090,12 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
 
 err_slot_name:
 	mmc_remove_host(mmc);
-	free_irq(mmc_slot(host).card_detect_irq, host);
 err_irq_cd:
 	if (host->use_reg)
 		omap_hsmmc_reg_put(host);
 err_reg:
 	if (host->pdata->cleanup)
 		host->pdata->cleanup(&pdev->dev);
-err_irq_cd_init:
-	free_irq(host->irq, host);
 err_irq:
 	if (host->tx_chan)
 		dma_release_channel(host->tx_chan);
@@ -2105,27 +2103,19 @@ err_irq:
 		dma_release_channel(host->rx_chan);
 	pm_runtime_put_sync(host->dev);
 	pm_runtime_disable(host->dev);
-	clk_put(host->fclk);
-	if (host->dbclk) {
+	if (host->dbclk)
 		clk_disable_unprepare(host->dbclk);
-		clk_put(host->dbclk);
-	}
 err1:
-	iounmap(host->base);
 	mmc_free_host(mmc);
 err_alloc:
 	omap_hsmmc_gpio_free(pdata);
 err:
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (res)
-		release_mem_region(res->start, resource_size(res));
 	return ret;
 }
 
 static int omap_hsmmc_remove(struct platform_device *pdev)
 {
 	struct omap_hsmmc_host *host = platform_get_drvdata(pdev);
-	struct resource *res;
 
 	pm_runtime_get_sync(host->dev);
 	mmc_remove_host(host->mmc);
@@ -2133,9 +2123,6 @@ static int omap_hsmmc_remove(struct platform_device *pdev)
 		omap_hsmmc_reg_put(host);
 	if (host->pdata->cleanup)
 		host->pdata->cleanup(&pdev->dev);
-	free_irq(host->irq, host);
-	if (mmc_slot(host).card_detect_irq)
-		free_irq(mmc_slot(host).card_detect_irq, host);
 
 	if (host->tx_chan)
 		dma_release_channel(host->tx_chan);
@@ -2144,20 +2131,12 @@ static int omap_hsmmc_remove(struct platform_device *pdev)
 
 	pm_runtime_put_sync(host->dev);
 	pm_runtime_disable(host->dev);
-	clk_put(host->fclk);
-	if (host->dbclk) {
+	if (host->dbclk)
 		clk_disable_unprepare(host->dbclk);
-		clk_put(host->dbclk);
-	}
 
 	omap_hsmmc_gpio_free(host->pdata);
-	iounmap(host->base);
 	mmc_free_host(host->mmc);
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (res)
-		release_mem_region(res->start, resource_size(res));
-
 	return 0;
 }
 

drivers/mmc/host/rtsx_pci_sdmmc.c

@@ -236,6 +236,9 @@ static void sd_send_cmd_get_rsp(struct realtek_pci_sdmmc *host,
 	case MMC_RSP_R1:
 		rsp_type = SD_RSP_TYPE_R1;
 		break;
+	case MMC_RSP_R1 & ~MMC_RSP_CRC:
+		rsp_type = SD_RSP_TYPE_R1 | SD_NO_CHECK_CRC7;
+		break;
 	case MMC_RSP_R1B:
 		rsp_type = SD_RSP_TYPE_R1b;
 		break;
@@ -816,6 +819,7 @@ static int sd_set_timing(struct realtek_pci_sdmmc *host, unsigned char timing)
 		rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CLK_CTL, CLK_LOW_FREQ, 0);
 		break;
 
+	case MMC_TIMING_MMC_DDR52:
 	case MMC_TIMING_UHS_DDR50:
 		rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CFG1,
 				0x0C | SD_ASYNC_FIFO_NOT_RST,
@@ -896,6 +900,7 @@ static void sdmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 		host->vpclk = true;
 		host->double_clk = false;
 		break;
+	case MMC_TIMING_MMC_DDR52:
 	case MMC_TIMING_UHS_DDR50:
 	case MMC_TIMING_UHS_SDR25:
 		host->ssc_depth = RTSX_SSC_DEPTH_1M;

drivers/mmc/host/rtsx_usb_sdmmc.c

@@ -34,7 +34,8 @@
 #include <linux/mfd/rtsx_usb.h>
 #include <asm/unaligned.h>
 
-#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
+#if defined(CONFIG_LEDS_CLASS) || (defined(CONFIG_LEDS_CLASS_MODULE) && \
+		defined(CONFIG_MMC_REALTEK_USB_MODULE))
 #include <linux/leds.h>
 #include <linux/workqueue.h>
 #define RTSX_USB_USE_LEDS_CLASS
@@ -59,7 +60,7 @@ struct rtsx_usb_sdmmc {
 
 	unsigned char		power_mode;
 
-#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
+#ifdef RTSX_USB_USE_LEDS_CLASS
 	struct led_classdev	led;
 	char			led_name[32];
 	struct work_struct	led_work;

drivers/mmc/host/sdhci-acpi.c

@@ -102,11 +102,19 @@ static void sdhci_acpi_int_hw_reset(struct sdhci_host *host)
 }
 
 static const struct sdhci_ops sdhci_acpi_ops_dflt = {
+	.set_clock = sdhci_set_clock,
 	.enable_dma = sdhci_acpi_enable_dma,
+	.set_bus_width = sdhci_set_bus_width,
+	.reset = sdhci_reset,
+	.set_uhs_signaling = sdhci_set_uhs_signaling,
 };
 
 static const struct sdhci_ops sdhci_acpi_ops_int = {
+	.set_clock = sdhci_set_clock,
 	.enable_dma = sdhci_acpi_enable_dma,
+	.set_bus_width = sdhci_set_bus_width,
+	.reset = sdhci_reset,
+	.set_uhs_signaling = sdhci_set_uhs_signaling,
 	.hw_reset   = sdhci_acpi_int_hw_reset,
 };
 

drivers/mmc/host/sdhci-bcm-kona.c

@@ -206,9 +206,13 @@ static void sdhci_bcm_kona_init_74_clocks(struct sdhci_host *host,
 }
 
 static struct sdhci_ops sdhci_bcm_kona_ops = {
+	.set_clock = sdhci_set_clock,
 	.get_max_clock = sdhci_bcm_kona_get_max_clk,
 	.get_timeout_clock = sdhci_bcm_kona_get_timeout_clock,
 	.platform_send_init_74_clocks = sdhci_bcm_kona_init_74_clocks,
+	.set_bus_width = sdhci_set_bus_width,
+	.reset = sdhci_reset,
+	.set_uhs_signaling = sdhci_set_uhs_signaling,
 	.card_event = sdhci_bcm_kona_card_event,
 };
 

drivers/mmc/host/sdhci-bcm2835.c

@@ -131,8 +131,12 @@ static const struct sdhci_ops bcm2835_sdhci_ops = {
 	.read_l = bcm2835_sdhci_readl,
 	.read_w = bcm2835_sdhci_readw,
 	.read_b = bcm2835_sdhci_readb,
+	.set_clock = sdhci_set_clock,
 	.get_max_clock = sdhci_pltfm_clk_get_max_clock,
 	.get_min_clock = bcm2835_sdhci_get_min_clock,
+	.set_bus_width = sdhci_set_bus_width,
+	.reset = sdhci_reset,
+	.set_uhs_signaling = sdhci_set_uhs_signaling,
 };
 
 static const struct sdhci_pltfm_data bcm2835_sdhci_pdata = {

drivers/mmc/host/sdhci-cns3xxx.c

@@ -30,13 +30,12 @@ static void sdhci_cns3xxx_set_clock(struct sdhci_host *host, unsigned int clock)
 	u16 clk;
 	unsigned long timeout;
 
-	if (clock == host->clock)
-		return;
+	host->mmc->actual_clock = 0;
 
 	sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
 
 	if (clock == 0)
-		goto out;
+		return;
 
 	while (host->max_clk / div > clock) {
 		/*
@@ -75,13 +74,14 @@ static void sdhci_cns3xxx_set_clock(struct sdhci_host *host, unsigned int clock)
 
 	clk |= SDHCI_CLOCK_CARD_EN;
 	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
-out:
-	host->clock = clock;
 }
 
 static const struct sdhci_ops sdhci_cns3xxx_ops = {
 	.get_max_clock	= sdhci_cns3xxx_get_max_clk,
 	.set_clock	= sdhci_cns3xxx_set_clock,
+	.set_bus_width	= sdhci_set_bus_width,
+	.reset          = sdhci_reset,
+	.set_uhs_signaling = sdhci_set_uhs_signaling,
 };
 
 static const struct sdhci_pltfm_data sdhci_cns3xxx_pdata = {
@@ -90,8 +90,7 @@ static const struct sdhci_pltfm_data sdhci_cns3xxx_pdata = {
 		  SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
 		  SDHCI_QUIRK_INVERTED_WRITE_PROTECT |
 		  SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN |
-		  SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
-		  SDHCI_QUIRK_NONSTANDARD_CLOCK,
+		  SDHCI_QUIRK_BROKEN_TIMEOUT_VAL,
 };
 
 static int sdhci_cns3xxx_probe(struct platform_device *pdev)

drivers/mmc/host/sdhci-dove.c

@@ -21,28 +21,17 @@
 
 #include <linux/clk.h>
 #include <linux/err.h>
-#include <linux/gpio.h>
 #include <linux/io.h>
 #include <linux/mmc/host.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/of_gpio.h>
 
 #include "sdhci-pltfm.h"
 
 struct sdhci_dove_priv {
 	struct clk *clk;
-	int gpio_cd;
 };
 
-static irqreturn_t sdhci_dove_carddetect_irq(int irq, void *data)
-{
-	struct sdhci_host *host = data;
-
-	tasklet_schedule(&host->card_tasklet);
-	return IRQ_HANDLED;
-}
-
 static u16 sdhci_dove_readw(struct sdhci_host *host, int reg)
 {
 	u16 ret;
@@ -60,8 +49,6 @@ static u16 sdhci_dove_readw(struct sdhci_host *host, int reg)
 
 static u32 sdhci_dove_readl(struct sdhci_host *host, int reg)
 {
-	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
-	struct sdhci_dove_priv *priv = pltfm_host->priv;
 	u32 ret;
 
 	ret = readl(host->ioaddr + reg);
@@ -71,14 +58,6 @@ static u32 sdhci_dove_readl(struct sdhci_host *host, int reg)
 		/* Mask the support for 3.0V */
 		ret &= ~SDHCI_CAN_VDD_300;
 		break;
-	case SDHCI_PRESENT_STATE:
-		if (gpio_is_valid(priv->gpio_cd)) {
-			if (gpio_get_value(priv->gpio_cd) == 0)
-				ret |= SDHCI_CARD_PRESENT;
-			else
-				ret &= ~SDHCI_CARD_PRESENT;
-		}
-		break;
 	}
 	return ret;
 }
@@ -86,6 +65,10 @@ static u32 sdhci_dove_readl(struct sdhci_host *host, int reg)
 static const struct sdhci_ops sdhci_dove_ops = {
 	.read_w	= sdhci_dove_readw,
 	.read_l	= sdhci_dove_readl,
+	.set_clock = sdhci_set_clock,
+	.set_bus_width = sdhci_set_bus_width,
+	.reset = sdhci_reset,
+	.set_uhs_signaling = sdhci_set_uhs_signaling,
 };
 
 static const struct sdhci_pltfm_data sdhci_dove_pdata = {
@@ -113,28 +96,9 @@ static int sdhci_dove_probe(struct platform_device *pdev)
 
 	priv->clk = devm_clk_get(&pdev->dev, NULL);
 
-	if (pdev->dev.of_node) {
-		priv->gpio_cd = of_get_named_gpio(pdev->dev.of_node,
-						  "cd-gpios", 0);
-	} else {
-		priv->gpio_cd = -EINVAL;
-	}
-
-	if (gpio_is_valid(priv->gpio_cd)) {
-		ret = gpio_request(priv->gpio_cd, "sdhci-cd");
-		if (ret) {
-			dev_err(&pdev->dev, "card detect gpio request failed: %d\n",
-				ret);
-			return ret;
-		}
-		gpio_direction_input(priv->gpio_cd);
-	}
-
 	host = sdhci_pltfm_init(pdev, &sdhci_dove_pdata, 0);
-	if (IS_ERR(host)) {
-		ret = PTR_ERR(host);
-		goto err_sdhci_pltfm_init;
-	}
+	if (IS_ERR(host))
+		return PTR_ERR(host);
 
 	pltfm_host = sdhci_priv(host);
 	pltfm_host->priv = priv;
@@ -142,39 +106,20 @@ static int sdhci_dove_probe(struct platform_device *pdev)
 	if (!IS_ERR(priv->clk))
 		clk_prepare_enable(priv->clk);
 
-	sdhci_get_of_property(pdev);
+	ret = mmc_of_parse(host->mmc);
+	if (ret)
+		goto err_sdhci_add;
 
 	ret = sdhci_add_host(host);
 	if (ret)
 		goto err_sdhci_add;
 
-	/*
-	 * We must request the IRQ after sdhci_add_host(), as the tasklet only
-	 * gets setup in sdhci_add_host() and we oops.
-	 */
-	if (gpio_is_valid(priv->gpio_cd)) {
-		ret = request_irq(gpio_to_irq(priv->gpio_cd),
-				  sdhci_dove_carddetect_irq,
-				  IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-				  mmc_hostname(host->mmc), host);
-		if (ret) {
-			dev_err(&pdev->dev, "card detect irq request failed: %d\n",
-				ret);
-			goto err_request_irq;
-		}
-	}
-
 	return 0;
 
-err_request_irq:
-	sdhci_remove_host(host, 0);
 err_sdhci_add:
 	if (!IS_ERR(priv->clk))
 		clk_disable_unprepare(priv->clk);
 	sdhci_pltfm_free(pdev);
-err_sdhci_pltfm_init:
-	if (gpio_is_valid(priv->gpio_cd))
-		gpio_free(priv->gpio_cd);
 	return ret;
 }
 
@@ -186,11 +131,6 @@ static int sdhci_dove_remove(struct platform_device *pdev)
 
 	sdhci_pltfm_unregister(pdev);
 
-	if (gpio_is_valid(priv->gpio_cd)) {
-		free_irq(gpio_to_irq(priv->gpio_cd), host);
-		gpio_free(priv->gpio_cd);
-	}
-
 	if (!IS_ERR(priv->clk))
 		clk_disable_unprepare(priv->clk);
 

drivers/mmc/host/sdhci-esdhc-imx.c

@@ -160,7 +160,6 @@ struct pltfm_imx_data {
 		MULTIBLK_IN_PROCESS, /* exact multiblock cmd in process */
 		WAIT_FOR_INT,        /* sent CMD12, waiting for response INT */
 	} multiblock_status;
-	u32 uhs_mode;
 	u32 is_ddr;
 };
 
@@ -382,7 +381,6 @@ static u16 esdhc_readw_le(struct sdhci_host *host, int reg)
 		if (val & ESDHC_MIX_CTRL_SMPCLK_SEL)
 			ret |= SDHCI_CTRL_TUNED_CLK;
 
-		ret |= (imx_data->uhs_mode & SDHCI_CTRL_UHS_MASK);
 		ret &= ~SDHCI_CTRL_PRESET_VAL_ENABLE;
 
 		return ret;
@@ -429,7 +427,6 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg)
 		else
 			new_val &= ~ESDHC_VENDOR_SPEC_VSELECT;
 		writel(new_val, host->ioaddr + ESDHC_VENDOR_SPEC);
-		imx_data->uhs_mode = val & SDHCI_CTRL_UHS_MASK;
 		if (imx_data->socdata->flags & ESDHC_FLAG_MAN_TUNING) {
 			new_val = readl(host->ioaddr + ESDHC_MIX_CTRL);
 			if (val & SDHCI_CTRL_TUNED_CLK)
@@ -600,12 +597,14 @@ static inline void esdhc_pltfm_set_clock(struct sdhci_host *host,
 	u32 temp, val;
 
 	if (clock == 0) {
+		host->mmc->actual_clock = 0;
+
 		if (esdhc_is_usdhc(imx_data)) {
 			val = readl(host->ioaddr + ESDHC_VENDOR_SPEC);
 			writel(val & ~ESDHC_VENDOR_SPEC_FRC_SDCLK_ON,
 					host->ioaddr + ESDHC_VENDOR_SPEC);
 		}
-		goto out;
+		return;
 	}
 
 	if (esdhc_is_usdhc(imx_data) && !imx_data->is_ddr)
@@ -645,8 +644,6 @@ static inline void esdhc_pltfm_set_clock(struct sdhci_host *host,
 	}
 
 	mdelay(1);
-out:
-	host->clock = clock;
 }
 
 static unsigned int esdhc_pltfm_get_ro(struct sdhci_host *host)
@@ -668,7 +665,7 @@ static unsigned int esdhc_pltfm_get_ro(struct sdhci_host *host)
 	return -ENOSYS;
 }
 
-static int esdhc_pltfm_bus_width(struct sdhci_host *host, int width)
+static void esdhc_pltfm_set_bus_width(struct sdhci_host *host, int width)
 {
 	u32 ctrl;
 
@@ -686,8 +683,6 @@ static int esdhc_pltfm_bus_width(struct sdhci_host *host, int width)
 
 	esdhc_clrset_le(host, ESDHC_CTRL_BUSWIDTH_MASK, ctrl,
 			SDHCI_HOST_CONTROL);
-
-	return 0;
 }
 
 static void esdhc_prepare_tuning(struct sdhci_host *host, u32 val)
@@ -697,6 +692,7 @@ static void esdhc_prepare_tuning(struct sdhci_host *host, u32 val)
 	/* FIXME: delay a bit for card to be ready for next tuning due to errors */
 	mdelay(1);
 
+	/* This is balanced by the runtime put in sdhci_tasklet_finish */
 	pm_runtime_get_sync(host->mmc->parent);
 	reg = readl(host->ioaddr + ESDHC_MIX_CTRL);
 	reg |= ESDHC_MIX_CTRL_EXE_TUNE | ESDHC_MIX_CTRL_SMPCLK_SEL |
@@ -713,13 +709,12 @@ static void esdhc_request_done(struct mmc_request *mrq)
 	complete(&mrq->completion);
 }
 
-static int esdhc_send_tuning_cmd(struct sdhci_host *host, u32 opcode)
+static int esdhc_send_tuning_cmd(struct sdhci_host *host, u32 opcode,
+				 struct scatterlist *sg)
 {
 	struct mmc_command cmd = {0};
 	struct mmc_request mrq = {NULL};
 	struct mmc_data data = {0};
-	struct scatterlist sg;
-	char tuning_pattern[ESDHC_TUNING_BLOCK_PATTERN_LEN];
 
 	cmd.opcode = opcode;
 	cmd.arg = 0;
@@ -728,11 +723,9 @@ static int esdhc_send_tuning_cmd(struct sdhci_host *host, u32 opcode)
 	data.blksz = ESDHC_TUNING_BLOCK_PATTERN_LEN;
 	data.blocks = 1;
 	data.flags = MMC_DATA_READ;
-	data.sg = &sg;
+	data.sg = sg;
 	data.sg_len = 1;
 
-	sg_init_one(&sg, tuning_pattern, sizeof(tuning_pattern));
-
 	mrq.cmd = &cmd;
 	mrq.cmd->mrq = &mrq;
 	mrq.data = &data;
@@ -742,14 +735,12 @@ static int esdhc_send_tuning_cmd(struct sdhci_host *host, u32 opcode)
 	mrq.done = esdhc_request_done;
 	init_completion(&(mrq.completion));
 
-	disable_irq(host->irq);
-	spin_lock(&host->lock);
+	spin_lock_irq(&host->lock);
 	host->mrq = &mrq;
 
 	sdhci_send_command(host, mrq.cmd);
 
-	spin_unlock(&host->lock);
-	enable_irq(host->irq);
+	spin_unlock_irq(&host->lock);
 
 	wait_for_completion(&mrq.completion);
 
@@ -772,13 +763,21 @@ static void esdhc_post_tuning(struct sdhci_host *host)
 
 static int esdhc_executing_tuning(struct sdhci_host *host, u32 opcode)
 {
+	struct scatterlist sg;
+	char *tuning_pattern;
 	int min, max, avg, ret;
 
+	tuning_pattern = kmalloc(ESDHC_TUNING_BLOCK_PATTERN_LEN, GFP_KERNEL);
+	if (!tuning_pattern)
+		return -ENOMEM;
+
+	sg_init_one(&sg, tuning_pattern, ESDHC_TUNING_BLOCK_PATTERN_LEN);
+
 	/* find the mininum delay first which can pass tuning */
 	min = ESDHC_TUNE_CTRL_MIN;
 	while (min < ESDHC_TUNE_CTRL_MAX) {
 		esdhc_prepare_tuning(host, min);
-		if (!esdhc_send_tuning_cmd(host, opcode))
+		if (!esdhc_send_tuning_cmd(host, opcode, &sg))
 			break;
 		min += ESDHC_TUNE_CTRL_STEP;
 	}
@@ -787,7 +786,7 @@ static int esdhc_executing_tuning(struct sdhci_host *host, u32 opcode)
 	max = min + ESDHC_TUNE_CTRL_STEP;
 	while (max < ESDHC_TUNE_CTRL_MAX) {
 		esdhc_prepare_tuning(host, max);
-		if (esdhc_send_tuning_cmd(host, opcode)) {
+		if (esdhc_send_tuning_cmd(host, opcode, &sg)) {
 			max -= ESDHC_TUNE_CTRL_STEP;
 			break;
 		}
@@ -797,9 +796,11 @@ static int esdhc_executing_tuning(struct sdhci_host *host, u32 opcode)
 	/* use average delay to get the best timing */
 	avg = (min + max) / 2;
 	esdhc_prepare_tuning(host, avg);
-	ret = esdhc_send_tuning_cmd(host, opcode);
+	ret = esdhc_send_tuning_cmd(host, opcode, &sg);
 	esdhc_post_tuning(host);
 
+	kfree(tuning_pattern);
+
 	dev_dbg(mmc_dev(host->mmc), "tunning %s at 0x%x ret %d\n",
 		ret ? "failed" : "passed", avg, ret);
 
@@ -837,28 +838,21 @@ static int esdhc_change_pinstate(struct sdhci_host *host,
 	return pinctrl_select_state(imx_data->pinctrl, pinctrl);
 }
 
-static int esdhc_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
+static void esdhc_set_uhs_signaling(struct sdhci_host *host, unsigned timing)
 {
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct pltfm_imx_data *imx_data = pltfm_host->priv;
 	struct esdhc_platform_data *boarddata = &imx_data->boarddata;
 
-	switch (uhs) {
+	switch (timing) {
 	case MMC_TIMING_UHS_SDR12:
-		imx_data->uhs_mode = SDHCI_CTRL_UHS_SDR12;
-		break;
 	case MMC_TIMING_UHS_SDR25:
-		imx_data->uhs_mode = SDHCI_CTRL_UHS_SDR25;
-		break;
 	case MMC_TIMING_UHS_SDR50:
-		imx_data->uhs_mode = SDHCI_CTRL_UHS_SDR50;
-		break;
 	case MMC_TIMING_UHS_SDR104:
 	case MMC_TIMING_MMC_HS200:
-		imx_data->uhs_mode = SDHCI_CTRL_UHS_SDR104;
 		break;
 	case MMC_TIMING_UHS_DDR50:
-		imx_data->uhs_mode = SDHCI_CTRL_UHS_DDR50;
+	case MMC_TIMING_MMC_DDR52:
 		writel(readl(host->ioaddr + ESDHC_MIX_CTRL) |
 				ESDHC_MIX_CTRL_DDREN,
 				host->ioaddr + ESDHC_MIX_CTRL);
@@ -875,7 +869,15 @@ static int esdhc_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
 		break;
 	}
 
-	return esdhc_change_pinstate(host, uhs);
+	esdhc_change_pinstate(host, timing);
+}
+
+static void esdhc_reset(struct sdhci_host *host, u8 mask)
+{
+	sdhci_reset(host, mask);
+
+	sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
+	sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
 }
 
 static struct sdhci_ops sdhci_esdhc_ops = {
@@ -888,8 +890,9 @@ static struct sdhci_ops sdhci_esdhc_ops = {
 	.get_max_clock = esdhc_pltfm_get_max_clock,
 	.get_min_clock = esdhc_pltfm_get_min_clock,
 	.get_ro = esdhc_pltfm_get_ro,
-	.platform_bus_width = esdhc_pltfm_bus_width,
+	.set_bus_width = esdhc_pltfm_set_bus_width,
 	.set_uhs_signaling = esdhc_set_uhs_signaling,
+	.reset = esdhc_reset,
 };
 
 static const struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = {
@@ -1170,8 +1173,10 @@ static int sdhci_esdhc_runtime_suspend(struct device *dev)
 
 	ret = sdhci_runtime_suspend_host(host);
 
-	clk_disable_unprepare(imx_data->clk_per);
-	clk_disable_unprepare(imx_data->clk_ipg);
+	if (!sdhci_sdio_irq_enabled(host)) {
+		clk_disable_unprepare(imx_data->clk_per);
+		clk_disable_unprepare(imx_data->clk_ipg);
+	}
 	clk_disable_unprepare(imx_data->clk_ahb);
 
 	return ret;
@@ -1183,8 +1188,10 @@ static int sdhci_esdhc_runtime_resume(struct device *dev)
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct pltfm_imx_data *imx_data = pltfm_host->priv;
 
-	clk_prepare_enable(imx_data->clk_per);
-	clk_prepare_enable(imx_data->clk_ipg);
+	if (!sdhci_sdio_irq_enabled(host)) {
+		clk_prepare_enable(imx_data->clk_per);
+		clk_prepare_enable(imx_data->clk_ipg);
+	}
 	clk_prepare_enable(imx_data->clk_ahb);
 
 	return sdhci_runtime_resume_host(host);

drivers/mmc/host/sdhci-esdhc.h

@@ -20,10 +20,8 @@
 
 #define ESDHC_DEFAULT_QUIRKS	(SDHCI_QUIRK_FORCE_BLK_SZ_2048 | \
 				SDHCI_QUIRK_NO_BUSY_IRQ | \
-				SDHCI_QUIRK_NONSTANDARD_CLOCK | \
 				SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK | \
-				SDHCI_QUIRK_PIO_NEEDS_DELAY | \
-				SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET)
+				SDHCI_QUIRK_PIO_NEEDS_DELAY)
 
 #define ESDHC_SYSTEM_CONTROL	0x2c
 #define ESDHC_CLOCK_MASK	0x0000fff0

drivers/mmc/host/sdhci-of-arasan.c

@@ -52,8 +52,12 @@ static unsigned int sdhci_arasan_get_timeout_clock(struct sdhci_host *host)
 }
 
 static struct sdhci_ops sdhci_arasan_ops = {
+	.set_clock = sdhci_set_clock,
 	.get_max_clock = sdhci_pltfm_clk_get_max_clock,
 	.get_timeout_clock = sdhci_arasan_get_timeout_clock,
+	.set_bus_width = sdhci_set_bus_width,
+	.reset = sdhci_reset,
+	.set_uhs_signaling = sdhci_set_uhs_signaling,
 };
 
 static struct sdhci_pltfm_data sdhci_arasan_pdata = {

drivers/mmc/host/sdhci-of-esdhc.c

@@ -199,13 +199,14 @@ static unsigned int esdhc_of_get_min_clock(struct sdhci_host *host)
 
 static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
 {
-
 	int pre_div = 2;
 	int div = 1;
 	u32 temp;
 
+	host->mmc->actual_clock = 0;
+
 	if (clock == 0)
-		goto out;
+		return;
 
 	/* Workaround to reduce the clock frequency for p1010 esdhc */
 	if (of_find_compatible_node(NULL, NULL, "fsl,p1010-esdhc")) {
@@ -238,24 +239,8 @@ static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
 		| (pre_div << ESDHC_PREDIV_SHIFT));
 	sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
 	mdelay(1);
-out:
-	host->clock = clock;
-}
-
-#ifdef CONFIG_PM
-static u32 esdhc_proctl;
-static void esdhc_of_suspend(struct sdhci_host *host)
-{
-	esdhc_proctl = sdhci_be32bs_readl(host, SDHCI_HOST_CONTROL);
 }
 
-static void esdhc_of_resume(struct sdhci_host *host)
-{
-	esdhc_of_enable_dma(host);
-	sdhci_be32bs_writel(host, esdhc_proctl, SDHCI_HOST_CONTROL);
-}
-#endif
-
 static void esdhc_of_platform_init(struct sdhci_host *host)
 {
 	u32 vvn;
@@ -269,7 +254,7 @@ static void esdhc_of_platform_init(struct sdhci_host *host)
 		host->quirks &= ~SDHCI_QUIRK_NO_BUSY_IRQ;
 }
 
-static int esdhc_pltfm_bus_width(struct sdhci_host *host, int width)
+static void esdhc_pltfm_set_bus_width(struct sdhci_host *host, int width)
 {
 	u32 ctrl;
 
@@ -289,8 +274,6 @@ static int esdhc_pltfm_bus_width(struct sdhci_host *host, int width)
 
 	clrsetbits_be32(host->ioaddr + SDHCI_HOST_CONTROL,
 			ESDHC_CTRL_BUSWIDTH_MASK, ctrl);
-
-	return 0;
 }
 
 static const struct sdhci_ops sdhci_esdhc_ops = {
@@ -305,13 +288,46 @@ static const struct sdhci_ops sdhci_esdhc_ops = {
 	.get_max_clock = esdhc_of_get_max_clock,
 	.get_min_clock = esdhc_of_get_min_clock,
 	.platform_init = esdhc_of_platform_init,
-#ifdef CONFIG_PM
-	.platform_suspend = esdhc_of_suspend,
-	.platform_resume = esdhc_of_resume,
-#endif
 	.adma_workaround = esdhci_of_adma_workaround,
-	.platform_bus_width = esdhc_pltfm_bus_width,
+	.set_bus_width = esdhc_pltfm_set_bus_width,
+	.reset = sdhci_reset,
+	.set_uhs_signaling = sdhci_set_uhs_signaling,
+};
+
+#ifdef CONFIG_PM
+
+static u32 esdhc_proctl;
+static int esdhc_of_suspend(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+
+	esdhc_proctl = sdhci_be32bs_readl(host, SDHCI_HOST_CONTROL);
+
+	return sdhci_suspend_host(host);
+}
+
+static int esdhc_of_resume(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+	int ret = sdhci_resume_host(host);
+
+	if (ret == 0) {
+		/* Isn't this already done by sdhci_resume_host() ? --rmk */
+		esdhc_of_enable_dma(host);
+		sdhci_be32bs_writel(host, esdhc_proctl, SDHCI_HOST_CONTROL);
+	}
+
+	return ret;
+}
+
+static const struct dev_pm_ops esdhc_pmops = {
+	.suspend	= esdhc_of_suspend,
+	.resume		= esdhc_of_resume,
 };
+#define ESDHC_PMOPS (&esdhc_pmops)
+#else
+#define ESDHC_PMOPS NULL
+#endif
 
 static const struct sdhci_pltfm_data sdhci_esdhc_pdata = {
 	/*
@@ -374,7 +390,7 @@ static struct platform_driver sdhci_esdhc_driver = {
 		.name = "sdhci-esdhc",
 		.owner = THIS_MODULE,
 		.of_match_table = sdhci_esdhc_of_match,
-		.pm = SDHCI_PLTFM_PMOPS,
+		.pm = ESDHC_PMOPS,
 	},
 	.probe = sdhci_esdhc_probe,
 	.remove = sdhci_esdhc_remove,

drivers/mmc/host/sdhci-of-hlwd.c

@@ -58,6 +58,10 @@ static const struct sdhci_ops sdhci_hlwd_ops = {
 	.write_l = sdhci_hlwd_writel,
 	.write_w = sdhci_hlwd_writew,
 	.write_b = sdhci_hlwd_writeb,
+	.set_clock = sdhci_set_clock,
+	.set_bus_width = sdhci_set_bus_width,
+	.reset = sdhci_reset,
+	.set_uhs_signaling = sdhci_set_uhs_signaling,
 };
 
 static const struct sdhci_pltfm_data sdhci_hlwd_pdata = {

drivers/mmc/host/sdhci-pci-o2micro.c

@@ -21,6 +21,45 @@
 #include "sdhci-pci.h"
 #include "sdhci-pci-o2micro.h"
 
+static void o2_pci_set_baseclk(struct sdhci_pci_chip *chip, u32 value)
+{
+	u32 scratch_32;
+	pci_read_config_dword(chip->pdev,
+			      O2_SD_PLL_SETTING, &scratch_32);
+
+	scratch_32 &= 0x0000FFFF;
+	scratch_32 |= value;
+
+	pci_write_config_dword(chip->pdev,
+			       O2_SD_PLL_SETTING, scratch_32);
+}
+
+static void o2_pci_led_enable(struct sdhci_pci_chip *chip)
+{
+	int ret;
+	u32 scratch_32;
+
+	/* Set led of SD host function enable */
+	ret = pci_read_config_dword(chip->pdev,
+				    O2_SD_FUNC_REG0, &scratch_32);
+	if (ret)
+		return;
+
+	scratch_32 &= ~O2_SD_FREG0_LEDOFF;
+	pci_write_config_dword(chip->pdev,
+			       O2_SD_FUNC_REG0, scratch_32);
+
+	ret = pci_read_config_dword(chip->pdev,
+				    O2_SD_TEST_REG, &scratch_32);
+	if (ret)
+		return;
+
+	scratch_32 |= O2_SD_LED_ENABLE;
+	pci_write_config_dword(chip->pdev,
+			       O2_SD_TEST_REG, scratch_32);
+
+}
+
 void sdhci_pci_o2_fujin2_pci_init(struct sdhci_pci_chip *chip)
 {
 	u32 scratch_32;
@@ -216,6 +255,40 @@ int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
 		scratch &= 0x7f;
 		pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
 
+		/* DevId=8520 subId= 0x11 or 0x12  Type Chip support */
+		if (chip->pdev->device == PCI_DEVICE_ID_O2_FUJIN2) {
+			ret = pci_read_config_dword(chip->pdev,
+						    O2_SD_FUNC_REG0,
+						    &scratch_32);
+			scratch_32 = ((scratch_32 & 0xFF000000) >> 24);
+
+			/* Check Whether subId is 0x11 or 0x12 */
+			if ((scratch_32 == 0x11) || (scratch_32 == 0x12)) {
+				scratch_32 = 0x2c280000;
+
+				/* Set Base Clock to 208MZ */
+				o2_pci_set_baseclk(chip, scratch_32);
+				ret = pci_read_config_dword(chip->pdev,
+							    O2_SD_FUNC_REG4,
+							    &scratch_32);
+
+				/* Enable Base Clk setting change */
+				scratch_32 |= O2_SD_FREG4_ENABLE_CLK_SET;
+				pci_write_config_dword(chip->pdev,
+						       O2_SD_FUNC_REG4,
+						       scratch_32);
+
+				/* Set Tuning Window to 4 */
+				pci_write_config_byte(chip->pdev,
+						      O2_SD_TUNING_CTRL, 0x44);
+
+				break;
+			}
+		}
+
+		/* Enable 8520 led function */
+		o2_pci_led_enable(chip);
+
 		/* Set timeout CLK */
 		ret = pci_read_config_dword(chip->pdev,
 					    O2_SD_CLK_SETTING, &scratch_32);
@@ -276,7 +349,7 @@ int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
 		pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
 
 		ret = pci_read_config_dword(chip->pdev,
-					    O2_SD_FUNC_REG0, &scratch_32);
+					    O2_SD_PLL_SETTING, &scratch_32);
 
 		if ((scratch_32 & 0xff000000) == 0x01000000) {
 			scratch_32 &= 0x0000FFFF;
@@ -299,6 +372,9 @@ int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
 					       O2_SD_FUNC_REG4, scratch_32);
 		}
 
+		/* Set Tuning Windows to 5 */
+		pci_write_config_byte(chip->pdev,
+				O2_SD_TUNING_CTRL, 0x55);
 		/* Lock WP */
 		ret = pci_read_config_byte(chip->pdev,
 					   O2_SD_LOCK_WP, &scratch);

drivers/mmc/host/sdhci-pci-o2micro.h

@@ -57,6 +57,9 @@
 #define O2_SD_UHS2_L1_CTRL	0x35C
 #define O2_SD_FUNC_REG3		0x3E0
 #define O2_SD_FUNC_REG4		0x3E4
+#define O2_SD_LED_ENABLE	BIT(6)
+#define O2_SD_FREG0_LEDOFF	BIT(13)
+#define O2_SD_FREG4_ENABLE_CLK_SET	BIT(22)
 
 #define O2_SD_VENDOR_SETTING	0x110
 #define O2_SD_VENDOR_SETTING2	0x1C8

drivers/mmc/host/sdhci-pci.c

@@ -1031,7 +1031,7 @@ static int sdhci_pci_enable_dma(struct sdhci_host *host)
 	return 0;
 }
 
-static int sdhci_pci_bus_width(struct sdhci_host *host, int width)
+static void sdhci_pci_set_bus_width(struct sdhci_host *host, int width)
 {
 	u8 ctrl;
 
@@ -1052,8 +1052,6 @@ static int sdhci_pci_bus_width(struct sdhci_host *host, int width)
 	}
 
 	sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
-
-	return 0;
 }
 
 static void sdhci_pci_gpio_hw_reset(struct sdhci_host *host)
@@ -1080,8 +1078,11 @@ static void sdhci_pci_hw_reset(struct sdhci_host *host)
 }
 
 static const struct sdhci_ops sdhci_pci_ops = {
+	.set_clock	= sdhci_set_clock,
 	.enable_dma	= sdhci_pci_enable_dma,
-	.platform_bus_width	= sdhci_pci_bus_width,
+	.set_bus_width	= sdhci_pci_set_bus_width,
+	.reset		= sdhci_reset,
+	.set_uhs_signaling = sdhci_set_uhs_signaling,
 	.hw_reset		= sdhci_pci_hw_reset,
 };
 

drivers/mmc/host/sdhci-pltfm.c

@@ -45,6 +45,10 @@ unsigned int sdhci_pltfm_clk_get_max_clock(struct sdhci_host *host)
 EXPORT_SYMBOL_GPL(sdhci_pltfm_clk_get_max_clock);
 
 static const struct sdhci_ops sdhci_pltfm_ops = {
+	.set_clock = sdhci_set_clock,
+	.set_bus_width = sdhci_set_bus_width,
+	.reset = sdhci_reset,
+	.set_uhs_signaling = sdhci_set_uhs_signaling,
 };
 
 #ifdef CONFIG_OF

drivers/mmc/host/sdhci-pxav2.c

@@ -51,11 +51,13 @@
 #define MMC_CARD		0x1000
 #define MMC_WIDTH		0x0100
 
-static void pxav2_set_private_registers(struct sdhci_host *host, u8 mask)
+static void pxav2_reset(struct sdhci_host *host, u8 mask)
 {
 	struct platform_device *pdev = to_platform_device(mmc_dev(host->mmc));
 	struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
 
+	sdhci_reset(host, mask);
+
 	if (mask == SDHCI_RESET_ALL) {
 		u16 tmp = 0;
 
@@ -88,7 +90,7 @@ static void pxav2_set_private_registers(struct sdhci_host *host, u8 mask)
 	}
 }
 
-static int pxav2_mmc_set_width(struct sdhci_host *host, int width)
+static void pxav2_mmc_set_bus_width(struct sdhci_host *host, int width)
 {
 	u8 ctrl;
 	u16 tmp;
@@ -107,14 +109,14 @@ static int pxav2_mmc_set_width(struct sdhci_host *host, int width)
 	}
 	writew(tmp, host->ioaddr + SD_CE_ATA_2);
 	writeb(ctrl, host->ioaddr + SDHCI_HOST_CONTROL);
-
-	return 0;
 }
 
 static const struct sdhci_ops pxav2_sdhci_ops = {
+	.set_clock     = sdhci_set_clock,
 	.get_max_clock = sdhci_pltfm_clk_get_max_clock,
-	.platform_reset_exit = pxav2_set_private_registers,
-	.platform_bus_width = pxav2_mmc_set_width,
+	.set_bus_width = pxav2_mmc_set_bus_width,
+	.reset         = pxav2_reset,
+	.set_uhs_signaling = sdhci_set_uhs_signaling,
 };
 
 #ifdef CONFIG_OF

drivers/mmc/host/sdhci-pxav3.c

@@ -112,11 +112,13 @@ static int mv_conf_mbus_windows(struct platform_device *pdev,
 	return 0;
 }
 
-static void pxav3_set_private_registers(struct sdhci_host *host, u8 mask)
+static void pxav3_reset(struct sdhci_host *host, u8 mask)
 {
 	struct platform_device *pdev = to_platform_device(mmc_dev(host->mmc));
 	struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
 
+	sdhci_reset(host, mask);
+
 	if (mask == SDHCI_RESET_ALL) {
 		/*
 		 * tune timing of read data/command when crc error happen
@@ -184,7 +186,7 @@ static void pxav3_gen_init_74_clocks(struct sdhci_host *host, u8 power_mode)
 	pxa->power_mode = power_mode;
 }
 
-static int pxav3_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
+static void pxav3_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
 {
 	u16 ctrl_2;
 
@@ -218,15 +220,16 @@ static int pxav3_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
 	dev_dbg(mmc_dev(host->mmc),
 		"%s uhs = %d, ctrl_2 = %04X\n",
 		__func__, uhs, ctrl_2);
-
-	return 0;
 }
 
 static const struct sdhci_ops pxav3_sdhci_ops = {
-	.platform_reset_exit = pxav3_set_private_registers,
+	.set_clock = sdhci_set_clock,
 	.set_uhs_signaling = pxav3_set_uhs_signaling,
 	.platform_send_init_74_clocks = pxav3_gen_init_74_clocks,
 	.get_max_clock = sdhci_pltfm_clk_get_max_clock,
+	.set_bus_width = sdhci_set_bus_width,
+	.reset = pxav3_reset,
+	.set_uhs_signaling = sdhci_set_uhs_signaling,
 };
 
 static struct sdhci_pltfm_data sdhci_pxav3_pdata = {

drivers/mmc/host/sdhci-s3c.c

@@ -33,9 +33,6 @@
 
 #define MAX_BUS_CLK	(4)
 
-/* Number of gpio's used is max data bus width + command and clock lines */
-#define NUM_GPIOS(x)	(x + 2)
-
 /**
  * struct sdhci_s3c - S3C SDHCI instance
  * @host: The SDHCI host created
@@ -58,6 +55,8 @@ struct sdhci_s3c {
 	struct clk		*clk_io;
 	struct clk		*clk_bus[MAX_BUS_CLK];
 	unsigned long		clk_rates[MAX_BUS_CLK];
+
+	bool			no_divider;
 };
 
 /**
@@ -70,6 +69,7 @@ struct sdhci_s3c {
  */
 struct sdhci_s3c_drv_data {
 	unsigned int	sdhci_quirks;
+	bool		no_divider;
 };
 
 static inline struct sdhci_s3c *to_s3c(struct sdhci_host *host)
@@ -119,7 +119,7 @@ static unsigned int sdhci_s3c_consider_clock(struct sdhci_s3c *ourhost,
 	 * If controller uses a non-standard clock division, find the best clock
 	 * speed possible with selected clock source and skip the division.
 	 */
-	if (ourhost->host->quirks & SDHCI_QUIRK_NONSTANDARD_CLOCK) {
+	if (ourhost->no_divider) {
 		rate = clk_round_rate(clksrc, wanted);
 		return wanted - rate;
 	}
@@ -161,9 +161,13 @@ static void sdhci_s3c_set_clock(struct sdhci_host *host, unsigned int clock)
 	int src;
 	u32 ctrl;
 
+	host->mmc->actual_clock = 0;
+
 	/* don't bother if the clock is going off. */
-	if (clock == 0)
+	if (clock == 0) {
+		sdhci_set_clock(host, clock);
 		return;
+	}
 
 	for (src = 0; src < MAX_BUS_CLK; src++) {
 		delta = sdhci_s3c_consider_clock(ourhost, src, clock);
@@ -215,6 +219,8 @@ static void sdhci_s3c_set_clock(struct sdhci_host *host, unsigned int clock)
 	if (clock < 25 * 1000000)
 		ctrl |= (S3C_SDHCI_CTRL3_FCSEL3 | S3C_SDHCI_CTRL3_FCSEL2);
 	writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL3);
+
+	sdhci_set_clock(host, clock);
 }
 
 /**
@@ -295,10 +301,11 @@ static void sdhci_cmu_set_clock(struct sdhci_host *host, unsigned int clock)
 	unsigned long timeout;
 	u16 clk = 0;
 
+	host->mmc->actual_clock = 0;
+
 	/* If the clock is going off, set to 0 at clock control register */
 	if (clock == 0) {
 		sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
-		host->clock = clock;
 		return;
 	}
 
@@ -306,8 +313,6 @@ static void sdhci_cmu_set_clock(struct sdhci_host *host, unsigned int clock)
 
 	clk_set_rate(ourhost->clk_bus[ourhost->cur_clk], clock);
 
-	host->clock = clock;
-
 	clk = SDHCI_CLOCK_INT_EN;
 	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
 
@@ -329,14 +334,14 @@ static void sdhci_cmu_set_clock(struct sdhci_host *host, unsigned int clock)
 }
 
 /**
- * sdhci_s3c_platform_bus_width - support 8bit buswidth
+ * sdhci_s3c_set_bus_width - support 8bit buswidth
  * @host: The SDHCI host being queried
  * @width: MMC_BUS_WIDTH_ macro for the bus width being requested
  *
  * We have 8-bit width support but is not a v3 controller.
  * So we add platform_bus_width() and support 8bit width.
  */
-static int sdhci_s3c_platform_bus_width(struct sdhci_host *host, int width)
+static void sdhci_s3c_set_bus_width(struct sdhci_host *host, int width)
 {
 	u8 ctrl;
 
@@ -358,93 +363,23 @@ static int sdhci_s3c_platform_bus_width(struct sdhci_host *host, int width)
 	}
 
 	sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
-
-	return 0;
 }
 
 static struct sdhci_ops sdhci_s3c_ops = {
 	.get_max_clock		= sdhci_s3c_get_max_clk,
 	.set_clock		= sdhci_s3c_set_clock,
 	.get_min_clock		= sdhci_s3c_get_min_clock,
-	.platform_bus_width	= sdhci_s3c_platform_bus_width,
+	.set_bus_width		= sdhci_s3c_set_bus_width,
+	.reset			= sdhci_reset,
+	.set_uhs_signaling	= sdhci_set_uhs_signaling,
 };
 
-static void sdhci_s3c_notify_change(struct platform_device *dev, int state)
-{
-	struct sdhci_host *host = platform_get_drvdata(dev);
-#ifdef CONFIG_PM_RUNTIME
-	struct sdhci_s3c *sc = sdhci_priv(host);
-#endif
-	unsigned long flags;
-
-	if (host) {
-		spin_lock_irqsave(&host->lock, flags);
-		if (state) {
-			dev_dbg(&dev->dev, "card inserted.\n");
-#ifdef CONFIG_PM_RUNTIME
-			clk_prepare_enable(sc->clk_io);
-#endif
-			host->flags &= ~SDHCI_DEVICE_DEAD;
-			host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
-		} else {
-			dev_dbg(&dev->dev, "card removed.\n");
-			host->flags |= SDHCI_DEVICE_DEAD;
-			host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
-#ifdef CONFIG_PM_RUNTIME
-			clk_disable_unprepare(sc->clk_io);
-#endif
-		}
-		tasklet_schedule(&host->card_tasklet);
-		spin_unlock_irqrestore(&host->lock, flags);
-	}
-}
-
-static irqreturn_t sdhci_s3c_gpio_card_detect_thread(int irq, void *dev_id)
-{
-	struct sdhci_s3c *sc = dev_id;
-	int status = gpio_get_value(sc->ext_cd_gpio);
-	if (sc->pdata->ext_cd_gpio_invert)
-		status = !status;
-	sdhci_s3c_notify_change(sc->pdev, status);
-	return IRQ_HANDLED;
-}
-
-static void sdhci_s3c_setup_card_detect_gpio(struct sdhci_s3c *sc)
-{
-	struct s3c_sdhci_platdata *pdata = sc->pdata;
-	struct device *dev = &sc->pdev->dev;
-
-	if (devm_gpio_request(dev, pdata->ext_cd_gpio, "SDHCI EXT CD") == 0) {
-		sc->ext_cd_gpio = pdata->ext_cd_gpio;
-		sc->ext_cd_irq = gpio_to_irq(pdata->ext_cd_gpio);
-		if (sc->ext_cd_irq &&
-		    request_threaded_irq(sc->ext_cd_irq, NULL,
-					 sdhci_s3c_gpio_card_detect_thread,
-					 IRQF_TRIGGER_RISING |
-					 IRQF_TRIGGER_FALLING |
-					 IRQF_ONESHOT,
-					 dev_name(dev), sc) == 0) {
-			int status = gpio_get_value(sc->ext_cd_gpio);
-			if (pdata->ext_cd_gpio_invert)
-				status = !status;
-			sdhci_s3c_notify_change(sc->pdev, status);
-		} else {
-			dev_warn(dev, "cannot request irq for card detect\n");
-			sc->ext_cd_irq = 0;
-		}
-	} else {
-		dev_err(dev, "cannot request gpio for card detect\n");
-	}
-}
-
 #ifdef CONFIG_OF
 static int sdhci_s3c_parse_dt(struct device *dev,
 		struct sdhci_host *host, struct s3c_sdhci_platdata *pdata)
 {
 	struct device_node *node = dev->of_node;
-	struct sdhci_s3c *ourhost = to_s3c(host);
 	u32 max_width;
-	int gpio;
 
 	/* if the bus-width property is not specified, assume width as 1 */
 	if (of_property_read_u32(node, "bus-width", &max_width))
@@ -462,18 +397,8 @@ static int sdhci_s3c_parse_dt(struct device *dev,
 		return 0;
 	}
 
-	gpio = of_get_named_gpio(node, "cd-gpios", 0);
-	if (gpio_is_valid(gpio)) {
-		pdata->cd_type = S3C_SDHCI_CD_GPIO;
-		pdata->ext_cd_gpio = gpio;
-		ourhost->ext_cd_gpio = -1;
-		if (of_get_property(node, "cd-inverted", NULL))
-			pdata->ext_cd_gpio_invert = 1;
+	if (of_get_named_gpio(node, "cd-gpios", 0))
 		return 0;
-	} else if (gpio != -ENOENT) {
-		dev_err(dev, "invalid card detect gpio specified\n");
-		return -EINVAL;
-	}
 
 	/* assuming internal card detect that will be configured by pinctrl */
 	pdata->cd_type = S3C_SDHCI_CD_INTERNAL;
@@ -606,8 +531,10 @@ static int sdhci_s3c_probe(struct platform_device *pdev)
 	/* Setup quirks for the controller */
 	host->quirks |= SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC;
 	host->quirks |= SDHCI_QUIRK_NO_HISPD_BIT;
-	if (drv_data)
+	if (drv_data) {
 		host->quirks |= drv_data->sdhci_quirks;
+		sc->no_divider = drv_data->no_divider;
+	}
 
 #ifndef CONFIG_MMC_SDHCI_S3C_DMA
 
@@ -656,7 +583,7 @@ static int sdhci_s3c_probe(struct platform_device *pdev)
 	 * If controller does not have internal clock divider,
 	 * we can use overriding functions instead of default.
 	 */
-	if (host->quirks & SDHCI_QUIRK_NONSTANDARD_CLOCK) {
+	if (sc->no_divider) {
 		sdhci_s3c_ops.set_clock = sdhci_cmu_set_clock;
 		sdhci_s3c_ops.get_min_clock = sdhci_cmu_get_min_clock;
 		sdhci_s3c_ops.get_max_clock = sdhci_cmu_get_max_clock;
@@ -674,6 +601,8 @@ static int sdhci_s3c_probe(struct platform_device *pdev)
 	pm_runtime_use_autosuspend(&pdev->dev);
 	pm_suspend_ignore_children(&pdev->dev, 1);
 
+	mmc_of_parse(host->mmc);
+
 	ret = sdhci_add_host(host);
 	if (ret) {
 		dev_err(dev, "sdhci_add_host() failed\n");
@@ -682,15 +611,6 @@ static int sdhci_s3c_probe(struct platform_device *pdev)
 		goto err_req_regs;
 	}
 
-	/* The following two methods of card detection might call
-	   sdhci_s3c_notify_change() immediately, so they can be called
-	   only after sdhci_add_host(). Setup errors are ignored. */
-	if (pdata->cd_type == S3C_SDHCI_CD_EXTERNAL && pdata->ext_cd_init)
-		pdata->ext_cd_init(&sdhci_s3c_notify_change);
-	if (pdata->cd_type == S3C_SDHCI_CD_GPIO &&
-	    gpio_is_valid(pdata->ext_cd_gpio))
-		sdhci_s3c_setup_card_detect_gpio(sc);
-
 #ifdef CONFIG_PM_RUNTIME
 	if (pdata->cd_type != S3C_SDHCI_CD_INTERNAL)
 		clk_disable_unprepare(sc->clk_io);
@@ -711,16 +631,12 @@ static int sdhci_s3c_remove(struct platform_device *pdev)
 {
 	struct sdhci_host *host =  platform_get_drvdata(pdev);
 	struct sdhci_s3c *sc = sdhci_priv(host);
-	struct s3c_sdhci_platdata *pdata = sc->pdata;
-
-	if (pdata->cd_type == S3C_SDHCI_CD_EXTERNAL && pdata->ext_cd_cleanup)
-		pdata->ext_cd_cleanup(&sdhci_s3c_notify_change);
 
 	if (sc->ext_cd_irq)
 		free_irq(sc->ext_cd_irq, sc);
 
 #ifdef CONFIG_PM_RUNTIME
-	if (pdata->cd_type != S3C_SDHCI_CD_INTERNAL)
+	if (sc->pdata->cd_type != S3C_SDHCI_CD_INTERNAL)
 		clk_prepare_enable(sc->clk_io);
 #endif
 	sdhci_remove_host(host, 1);
@@ -797,7 +713,7 @@ static const struct dev_pm_ops sdhci_s3c_pmops = {
 
 #if defined(CONFIG_CPU_EXYNOS4210) || defined(CONFIG_SOC_EXYNOS4212)
 static struct sdhci_s3c_drv_data exynos4_sdhci_drv_data = {
-	.sdhci_quirks = SDHCI_QUIRK_NONSTANDARD_CLOCK,
+	.no_divider = true,
 };
 #define EXYNOS4_SDHCI_DRV_DATA ((kernel_ulong_t)&exynos4_sdhci_drv_data)
 #else

drivers/mmc/host/sdhci-sirf.c

@@ -28,7 +28,11 @@ static unsigned int sdhci_sirf_get_max_clk(struct sdhci_host *host)
 }
 
 static struct sdhci_ops sdhci_sirf_ops = {
+	.set_clock = sdhci_set_clock,
 	.get_max_clock	= sdhci_sirf_get_max_clk,
+	.set_bus_width = sdhci_set_bus_width,
+	.reset = sdhci_reset,
+	.set_uhs_signaling = sdhci_set_uhs_signaling,
 };
 
 static struct sdhci_pltfm_data sdhci_sirf_pdata = {

drivers/mmc/host/sdhci-spear.c

@@ -38,7 +38,10 @@ struct spear_sdhci {
 
 /* sdhci ops */
 static const struct sdhci_ops sdhci_pltfm_ops = {
-	/* Nothing to do for now. */
+	.set_clock = sdhci_set_clock,
+	.set_bus_width = sdhci_set_bus_width,
+	.reset = sdhci_reset,
+	.set_uhs_signaling = sdhci_set_uhs_signaling,
 };
 
 #ifdef CONFIG_OF

drivers/mmc/host/sdhci-tegra.c

@@ -32,11 +32,17 @@
 
 /* Tegra SDHOST controller vendor register definitions */
 #define SDHCI_TEGRA_VENDOR_MISC_CTRL		0x120
+#define SDHCI_MISC_CTRL_ENABLE_SDR104		0x8
+#define SDHCI_MISC_CTRL_ENABLE_SDR50		0x10
 #define SDHCI_MISC_CTRL_ENABLE_SDHCI_SPEC_300	0x20
+#define SDHCI_MISC_CTRL_ENABLE_DDR50		0x200
 
 #define NVQUIRK_FORCE_SDHCI_SPEC_200	BIT(0)
 #define NVQUIRK_ENABLE_BLOCK_GAP_DET	BIT(1)
 #define NVQUIRK_ENABLE_SDHCI_SPEC_300	BIT(2)
+#define NVQUIRK_DISABLE_SDR50		BIT(3)
+#define NVQUIRK_DISABLE_SDR104		BIT(4)
+#define NVQUIRK_DISABLE_DDR50		BIT(5)
 
 struct sdhci_tegra_soc_data {
 	const struct sdhci_pltfm_data *pdata;
@@ -48,19 +54,6 @@ struct sdhci_tegra {
 	int power_gpio;
 };
 
-static u32 tegra_sdhci_readl(struct sdhci_host *host, int reg)
-{
-	u32 val;
-
-	if (unlikely(reg == SDHCI_PRESENT_STATE)) {
-		/* Use wp_gpio here instead? */
-		val = readl(host->ioaddr + reg);
-		return val | SDHCI_WRITE_PROTECT;
-	}
-
-	return readl(host->ioaddr + reg);
-}
-
 static u16 tegra_sdhci_readw(struct sdhci_host *host, int reg)
 {
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
@@ -108,26 +101,33 @@ static unsigned int tegra_sdhci_get_ro(struct sdhci_host *host)
 	return mmc_gpio_get_ro(host->mmc);
 }
 
-static void tegra_sdhci_reset_exit(struct sdhci_host *host, u8 mask)
+static void tegra_sdhci_reset(struct sdhci_host *host, u8 mask)
 {
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct sdhci_tegra *tegra_host = pltfm_host->priv;
 	const struct sdhci_tegra_soc_data *soc_data = tegra_host->soc_data;
+	u32 misc_ctrl;
+
+	sdhci_reset(host, mask);
 
 	if (!(mask & SDHCI_RESET_ALL))
 		return;
 
+	misc_ctrl = sdhci_readw(host, SDHCI_TEGRA_VENDOR_MISC_CTRL);
 	/* Erratum: Enable SDHCI spec v3.00 support */
-	if (soc_data->nvquirks & NVQUIRK_ENABLE_SDHCI_SPEC_300) {
-		u32 misc_ctrl;
-
-		misc_ctrl = sdhci_readb(host, SDHCI_TEGRA_VENDOR_MISC_CTRL);
+	if (soc_data->nvquirks & NVQUIRK_ENABLE_SDHCI_SPEC_300)
 		misc_ctrl |= SDHCI_MISC_CTRL_ENABLE_SDHCI_SPEC_300;
-		sdhci_writeb(host, misc_ctrl, SDHCI_TEGRA_VENDOR_MISC_CTRL);
-	}
+	/* Don't advertise UHS modes which aren't supported yet */
+	if (soc_data->nvquirks & NVQUIRK_DISABLE_SDR50)
+		misc_ctrl &= ~SDHCI_MISC_CTRL_ENABLE_SDR50;
+	if (soc_data->nvquirks & NVQUIRK_DISABLE_DDR50)
+		misc_ctrl &= ~SDHCI_MISC_CTRL_ENABLE_DDR50;
+	if (soc_data->nvquirks & NVQUIRK_DISABLE_SDR104)
+		misc_ctrl &= ~SDHCI_MISC_CTRL_ENABLE_SDR104;
+	sdhci_writew(host, misc_ctrl, SDHCI_TEGRA_VENDOR_MISC_CTRL);
 }
 
-static int tegra_sdhci_buswidth(struct sdhci_host *host, int bus_width)
+static void tegra_sdhci_set_bus_width(struct sdhci_host *host, int bus_width)
 {
 	u32 ctrl;
 
@@ -144,23 +144,25 @@ static int tegra_sdhci_buswidth(struct sdhci_host *host, int bus_width)
 			ctrl &= ~SDHCI_CTRL_4BITBUS;
 	}
 	sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
-	return 0;
 }
 
 static const struct sdhci_ops tegra_sdhci_ops = {
 	.get_ro     = tegra_sdhci_get_ro,
-	.read_l     = tegra_sdhci_readl,
 	.read_w     = tegra_sdhci_readw,
 	.write_l    = tegra_sdhci_writel,
-	.platform_bus_width = tegra_sdhci_buswidth,
-	.platform_reset_exit = tegra_sdhci_reset_exit,
+	.set_clock  = sdhci_set_clock,
+	.set_bus_width = tegra_sdhci_set_bus_width,
+	.reset      = tegra_sdhci_reset,
+	.set_uhs_signaling = sdhci_set_uhs_signaling,
+	.get_max_clock = sdhci_pltfm_clk_get_max_clock,
 };
 
 static const struct sdhci_pltfm_data sdhci_tegra20_pdata = {
 	.quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
 		  SDHCI_QUIRK_SINGLE_POWER_WRITE |
 		  SDHCI_QUIRK_NO_HISPD_BIT |
-		  SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC,
+		  SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
+		  SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
 	.ops  = &tegra_sdhci_ops,
 };
 
@@ -175,13 +177,16 @@ static const struct sdhci_pltfm_data sdhci_tegra30_pdata = {
 		  SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
 		  SDHCI_QUIRK_SINGLE_POWER_WRITE |
 		  SDHCI_QUIRK_NO_HISPD_BIT |
-		  SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC,
+		  SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
+		  SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
 	.ops  = &tegra_sdhci_ops,
 };
 
 static struct sdhci_tegra_soc_data soc_data_tegra30 = {
 	.pdata = &sdhci_tegra30_pdata,
-	.nvquirks = NVQUIRK_ENABLE_SDHCI_SPEC_300,
+	.nvquirks = NVQUIRK_ENABLE_SDHCI_SPEC_300 |
+		    NVQUIRK_DISABLE_SDR50 |
+		    NVQUIRK_DISABLE_SDR104,
 };
 
 static const struct sdhci_pltfm_data sdhci_tegra114_pdata = {
@@ -189,12 +194,16 @@ static const struct sdhci_pltfm_data sdhci_tegra114_pdata = {
 		  SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
 		  SDHCI_QUIRK_SINGLE_POWER_WRITE |
 		  SDHCI_QUIRK_NO_HISPD_BIT |
-		  SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC,
+		  SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
+		  SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
 	.ops  = &tegra_sdhci_ops,
 };
 
 static struct sdhci_tegra_soc_data soc_data_tegra114 = {
 	.pdata = &sdhci_tegra114_pdata,
+	.nvquirks = NVQUIRK_DISABLE_SDR50 |
+		    NVQUIRK_DISABLE_DDR50 |
+		    NVQUIRK_DISABLE_SDR104,
 };
 
 static const struct of_device_id sdhci_tegra_dt_match[] = {

drivers/mmc/host/sdhci.c

@@ -44,6 +44,8 @@
 
 #define MAX_TUNING_LOOP 40
 
+#define ADMA_SIZE	((128 * 2 + 1) * 4)
+
 static unsigned int debug_quirks = 0;
 static unsigned int debug_quirks2;
 
@@ -131,43 +133,26 @@ static void sdhci_dumpregs(struct sdhci_host *host)
  *                                                                           *
 \*****************************************************************************/
 
-static void sdhci_clear_set_irqs(struct sdhci_host *host, u32 clear, u32 set)
-{
-	u32 ier;
-
-	ier = sdhci_readl(host, SDHCI_INT_ENABLE);
-	ier &= ~clear;
-	ier |= set;
-	sdhci_writel(host, ier, SDHCI_INT_ENABLE);
-	sdhci_writel(host, ier, SDHCI_SIGNAL_ENABLE);
-}
-
-static void sdhci_unmask_irqs(struct sdhci_host *host, u32 irqs)
-{
-	sdhci_clear_set_irqs(host, 0, irqs);
-}
-
-static void sdhci_mask_irqs(struct sdhci_host *host, u32 irqs)
-{
-	sdhci_clear_set_irqs(host, irqs, 0);
-}
-
 static void sdhci_set_card_detection(struct sdhci_host *host, bool enable)
 {
-	u32 present, irqs;
+	u32 present;
 
 	if ((host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) ||
 	    (host->mmc->caps & MMC_CAP_NONREMOVABLE))
 		return;
 
-	present = sdhci_readl(host, SDHCI_PRESENT_STATE) &
-			      SDHCI_CARD_PRESENT;
-	irqs = present ? SDHCI_INT_CARD_REMOVE : SDHCI_INT_CARD_INSERT;
+	if (enable) {
+		present = sdhci_readl(host, SDHCI_PRESENT_STATE) &
+				      SDHCI_CARD_PRESENT;
 
-	if (enable)
-		sdhci_unmask_irqs(host, irqs);
-	else
-		sdhci_mask_irqs(host, irqs);
+		host->ier |= present ? SDHCI_INT_CARD_REMOVE :
+				       SDHCI_INT_CARD_INSERT;
+	} else {
+		host->ier &= ~(SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT);
+	}
+
+	sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
+	sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
 }
 
 static void sdhci_enable_card_detection(struct sdhci_host *host)
@@ -180,22 +165,9 @@ static void sdhci_disable_card_detection(struct sdhci_host *host)
 	sdhci_set_card_detection(host, false);
 }
 
-static void sdhci_reset(struct sdhci_host *host, u8 mask)
+void sdhci_reset(struct sdhci_host *host, u8 mask)
 {
 	unsigned long timeout;
-	u32 uninitialized_var(ier);
-
-	if (host->quirks & SDHCI_QUIRK_NO_CARD_NO_RESET) {
-		if (!(sdhci_readl(host, SDHCI_PRESENT_STATE) &
-			SDHCI_CARD_PRESENT))
-			return;
-	}
-
-	if (host->quirks & SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET)
-		ier = sdhci_readl(host, SDHCI_INT_ENABLE);
-
-	if (host->ops->platform_reset_enter)
-		host->ops->platform_reset_enter(host, mask);
 
 	sdhci_writeb(host, mask, SDHCI_SOFTWARE_RESET);
 
@@ -220,16 +192,27 @@ static void sdhci_reset(struct sdhci_host *host, u8 mask)
 		timeout--;
 		mdelay(1);
 	}
+}
+EXPORT_SYMBOL_GPL(sdhci_reset);
+
+static void sdhci_do_reset(struct sdhci_host *host, u8 mask)
+{
+	if (host->quirks & SDHCI_QUIRK_NO_CARD_NO_RESET) {
+		if (!(sdhci_readl(host, SDHCI_PRESENT_STATE) &
+			SDHCI_CARD_PRESENT))
+			return;
+	}
 
-	if (host->ops->platform_reset_exit)
-		host->ops->platform_reset_exit(host, mask);
+	host->ops->reset(host, mask);
 
-	if (host->quirks & SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET)
-		sdhci_clear_set_irqs(host, SDHCI_INT_ALL_MASK, ier);
+	if (mask & SDHCI_RESET_ALL) {
+		if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
+			if (host->ops->enable_dma)
+				host->ops->enable_dma(host);
+		}
 
-	if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
-		if ((host->ops->enable_dma) && (mask & SDHCI_RESET_ALL))
-			host->ops->enable_dma(host);
+		/* Resetting the controller clears many */
+		host->preset_enabled = false;
 	}
 }
 
@@ -238,15 +221,18 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios);
 static void sdhci_init(struct sdhci_host *host, int soft)
 {
 	if (soft)
-		sdhci_reset(host, SDHCI_RESET_CMD|SDHCI_RESET_DATA);
+		sdhci_do_reset(host, SDHCI_RESET_CMD|SDHCI_RESET_DATA);
 	else
-		sdhci_reset(host, SDHCI_RESET_ALL);
+		sdhci_do_reset(host, SDHCI_RESET_ALL);
 
-	sdhci_clear_set_irqs(host, SDHCI_INT_ALL_MASK,
-		SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT |
-		SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_INDEX |
-		SDHCI_INT_END_BIT | SDHCI_INT_CRC | SDHCI_INT_TIMEOUT |
-		SDHCI_INT_DATA_END | SDHCI_INT_RESPONSE);
+	host->ier = SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT |
+		    SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT |
+		    SDHCI_INT_INDEX | SDHCI_INT_END_BIT | SDHCI_INT_CRC |
+		    SDHCI_INT_TIMEOUT | SDHCI_INT_DATA_END |
+		    SDHCI_INT_RESPONSE;
+
+	sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
+	sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
 
 	if (soft) {
 		/* force clock reconfiguration */
@@ -502,11 +488,6 @@ static int sdhci_adma_table_pre(struct sdhci_host *host,
 	else
 		direction = DMA_TO_DEVICE;
 
-	/*
-	 * The ADMA descriptor table is mapped further down as we
-	 * need to fill it with data first.
-	 */
-
 	host->align_addr = dma_map_single(mmc_dev(host->mmc),
 		host->align_buffer, 128 * 4, direction);
 	if (dma_mapping_error(mmc_dev(host->mmc), host->align_addr))
@@ -567,7 +548,7 @@ static int sdhci_adma_table_pre(struct sdhci_host *host,
 		 * If this triggers then we have a calculation bug
 		 * somewhere. :/
 		 */
-		WARN_ON((desc - host->adma_desc) > (128 * 2 + 1) * 4);
+		WARN_ON((desc - host->adma_desc) > ADMA_SIZE);
 	}
 
 	if (host->quirks & SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC) {
@@ -595,17 +576,8 @@ static int sdhci_adma_table_pre(struct sdhci_host *host,
 			host->align_addr, 128 * 4, direction);
 	}
 
-	host->adma_addr = dma_map_single(mmc_dev(host->mmc),
-		host->adma_desc, (128 * 2 + 1) * 4, DMA_TO_DEVICE);
-	if (dma_mapping_error(mmc_dev(host->mmc), host->adma_addr))
-		goto unmap_entries;
-	BUG_ON(host->adma_addr & 0x3);
-
 	return 0;
 
-unmap_entries:
-	dma_unmap_sg(mmc_dev(host->mmc), data->sg,
-		data->sg_len, direction);
 unmap_align:
 	dma_unmap_single(mmc_dev(host->mmc), host->align_addr,
 		128 * 4, direction);
@@ -623,19 +595,25 @@ static void sdhci_adma_table_post(struct sdhci_host *host,
 	u8 *align;
 	char *buffer;
 	unsigned long flags;
+	bool has_unaligned;
 
 	if (data->flags & MMC_DATA_READ)
 		direction = DMA_FROM_DEVICE;
 	else
 		direction = DMA_TO_DEVICE;
 
-	dma_unmap_single(mmc_dev(host->mmc), host->adma_addr,
-		(128 * 2 + 1) * 4, DMA_TO_DEVICE);
-
 	dma_unmap_single(mmc_dev(host->mmc), host->align_addr,
 		128 * 4, direction);
 
-	if (data->flags & MMC_DATA_READ) {
+	/* Do a quick scan of the SG list for any unaligned mappings */
+	has_unaligned = false;
+	for_each_sg(data->sg, sg, host->sg_count, i)
+		if (sg_dma_address(sg) & 3) {
+			has_unaligned = true;
+			break;
+		}
+
+	if (has_unaligned && data->flags & MMC_DATA_READ) {
 		dma_sync_sg_for_cpu(mmc_dev(host->mmc), data->sg,
 			data->sg_len, direction);
 
@@ -721,9 +699,12 @@ static void sdhci_set_transfer_irqs(struct sdhci_host *host)
 	u32 dma_irqs = SDHCI_INT_DMA_END | SDHCI_INT_ADMA_ERROR;
 
 	if (host->flags & SDHCI_REQ_USE_DMA)
-		sdhci_clear_set_irqs(host, pio_irqs, dma_irqs);
+		host->ier = (host->ier & ~pio_irqs) | dma_irqs;
 	else
-		sdhci_clear_set_irqs(host, dma_irqs, pio_irqs);
+		host->ier = (host->ier & ~dma_irqs) | pio_irqs;
+
+	sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
+	sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
 }
 
 static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
@@ -976,8 +957,8 @@ static void sdhci_finish_data(struct sdhci_host *host)
 		 * upon error conditions.
 		 */
 		if (data->error) {
-			sdhci_reset(host, SDHCI_RESET_CMD);
-			sdhci_reset(host, SDHCI_RESET_DATA);
+			sdhci_do_reset(host, SDHCI_RESET_CMD);
+			sdhci_do_reset(host, SDHCI_RESET_DATA);
 		}
 
 		sdhci_send_command(host, data->stop);
@@ -1107,24 +1088,23 @@ static void sdhci_finish_command(struct sdhci_host *host)
 
 static u16 sdhci_get_preset_value(struct sdhci_host *host)
 {
-	u16 ctrl, preset = 0;
-
-	ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+	u16 preset = 0;
 
-	switch (ctrl & SDHCI_CTRL_UHS_MASK) {
-	case SDHCI_CTRL_UHS_SDR12:
+	switch (host->timing) {
+	case MMC_TIMING_UHS_SDR12:
 		preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR12);
 		break;
-	case SDHCI_CTRL_UHS_SDR25:
+	case MMC_TIMING_UHS_SDR25:
 		preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR25);
 		break;
-	case SDHCI_CTRL_UHS_SDR50:
+	case MMC_TIMING_UHS_SDR50:
 		preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR50);
 		break;
-	case SDHCI_CTRL_UHS_SDR104:
+	case MMC_TIMING_UHS_SDR104:
+	case MMC_TIMING_MMC_HS200:
 		preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR104);
 		break;
-	case SDHCI_CTRL_UHS_DDR50:
+	case MMC_TIMING_UHS_DDR50:
 		preset = sdhci_readw(host, SDHCI_PRESET_FOR_DDR50);
 		break;
 	default:
@@ -1136,32 +1116,22 @@ static u16 sdhci_get_preset_value(struct sdhci_host *host)
 	return preset;
 }
 
-static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
+void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
 {
 	int div = 0; /* Initialized for compiler warning */
 	int real_div = div, clk_mul = 1;
 	u16 clk = 0;
 	unsigned long timeout;
 
-	if (clock && clock == host->clock)
-		return;
-
 	host->mmc->actual_clock = 0;
 
-	if (host->ops->set_clock) {
-		host->ops->set_clock(host, clock);
-		if (host->quirks & SDHCI_QUIRK_NONSTANDARD_CLOCK)
-			return;
-	}
-
 	sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
 
 	if (clock == 0)
-		goto out;
+		return;
 
 	if (host->version >= SDHCI_SPEC_300) {
-		if (sdhci_readw(host, SDHCI_HOST_CONTROL2) &
-			SDHCI_CTRL_PRESET_VAL_ENABLE) {
+		if (host->preset_enabled) {
 			u16 pre_val;
 
 			clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
@@ -1247,26 +1217,16 @@ clock_set:
 
 	clk |= SDHCI_CLOCK_CARD_EN;
 	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
-
-out:
-	host->clock = clock;
 }
+EXPORT_SYMBOL_GPL(sdhci_set_clock);
 
-static inline void sdhci_update_clock(struct sdhci_host *host)
-{
-	unsigned int clock;
-
-	clock = host->clock;
-	host->clock = 0;
-	sdhci_set_clock(host, clock);
-}
-
-static int sdhci_set_power(struct sdhci_host *host, unsigned short power)
+static void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
+			    unsigned short vdd)
 {
 	u8 pwr = 0;
 
-	if (power != (unsigned short)-1) {
-		switch (1 << power) {
+	if (mode != MMC_POWER_OFF) {
+		switch (1 << vdd) {
 		case MMC_VDD_165_195:
 			pwr = SDHCI_POWER_180;
 			break;
@@ -1284,7 +1244,7 @@ static int sdhci_set_power(struct sdhci_host *host, unsigned short power)
 	}
 
 	if (host->pwr == pwr)
-		return -1;
+		return;
 
 	host->pwr = pwr;
 
@@ -1292,38 +1252,43 @@ static int sdhci_set_power(struct sdhci_host *host, unsigned short power)
 		sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
 		if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON)
 			sdhci_runtime_pm_bus_off(host);
-		return 0;
-	}
-
-	/*
-	 * Spec says that we should clear the power reg before setting
-	 * a new value. Some controllers don't seem to like this though.
-	 */
-	if (!(host->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE))
-		sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
+		vdd = 0;
+	} else {
+		/*
+		 * Spec says that we should clear the power reg before setting
+		 * a new value. Some controllers don't seem to like this though.
+		 */
+		if (!(host->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE))
+			sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
 
-	/*
-	 * At least the Marvell CaFe chip gets confused if we set the voltage
-	 * and set turn on power at the same time, so set the voltage first.
-	 */
-	if (host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER)
-		sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
+		/*
+		 * At least the Marvell CaFe chip gets confused if we set the
+		 * voltage and set turn on power at the same time, so set the
+		 * voltage first.
+		 */
+		if (host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER)
+			sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
 
-	pwr |= SDHCI_POWER_ON;
+		pwr |= SDHCI_POWER_ON;
 
-	sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
+		sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
 
-	if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON)
-		sdhci_runtime_pm_bus_on(host);
+		if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON)
+			sdhci_runtime_pm_bus_on(host);
 
-	/*
-	 * Some controllers need an extra 10ms delay of 10ms before they
-	 * can apply clock after applying power
-	 */
-	if (host->quirks & SDHCI_QUIRK_DELAY_AFTER_POWER)
-		mdelay(10);
+		/*
+		 * Some controllers need an extra 10ms delay of 10ms before
+		 * they can apply clock after applying power
+		 */
+		if (host->quirks & SDHCI_QUIRK_DELAY_AFTER_POWER)
+			mdelay(10);
+	}
 
-	return power;
+	if (host->vmmc) {
+		spin_unlock_irq(&host->lock);
+		mmc_regulator_set_ocr(host->mmc, host->vmmc, vdd);
+		spin_lock_irq(&host->lock);
+	}
 }
 
 /*****************************************************************************\
@@ -1427,10 +1392,53 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
 	spin_unlock_irqrestore(&host->lock, flags);
 }
 
+void sdhci_set_bus_width(struct sdhci_host *host, int width)
+{
+	u8 ctrl;
+
+	ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+	if (width == MMC_BUS_WIDTH_8) {
+		ctrl &= ~SDHCI_CTRL_4BITBUS;
+		if (host->version >= SDHCI_SPEC_300)
+			ctrl |= SDHCI_CTRL_8BITBUS;
+	} else {
+		if (host->version >= SDHCI_SPEC_300)
+			ctrl &= ~SDHCI_CTRL_8BITBUS;
+		if (width == MMC_BUS_WIDTH_4)
+			ctrl |= SDHCI_CTRL_4BITBUS;
+		else
+			ctrl &= ~SDHCI_CTRL_4BITBUS;
+	}
+	sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+}
+EXPORT_SYMBOL_GPL(sdhci_set_bus_width);
+
+void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing)
+{
+	u16 ctrl_2;
+
+	ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+	/* Select Bus Speed Mode for host */
+	ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
+	if ((timing == MMC_TIMING_MMC_HS200) ||
+	    (timing == MMC_TIMING_UHS_SDR104))
+		ctrl_2 |= SDHCI_CTRL_UHS_SDR104;
+	else if (timing == MMC_TIMING_UHS_SDR12)
+		ctrl_2 |= SDHCI_CTRL_UHS_SDR12;
+	else if (timing == MMC_TIMING_UHS_SDR25)
+		ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
+	else if (timing == MMC_TIMING_UHS_SDR50)
+		ctrl_2 |= SDHCI_CTRL_UHS_SDR50;
+	else if ((timing == MMC_TIMING_UHS_DDR50) ||
+		 (timing == MMC_TIMING_MMC_DDR52))
+		ctrl_2 |= SDHCI_CTRL_UHS_DDR50;
+	sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
+}
+EXPORT_SYMBOL_GPL(sdhci_set_uhs_signaling);
+
 static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
 {
 	unsigned long flags;
-	int vdd_bit = -1;
 	u8 ctrl;
 
 	spin_lock_irqsave(&host->lock, flags);
@@ -1456,45 +1464,17 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
 		!(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN))
 		sdhci_enable_preset_value(host, false);
 
-	sdhci_set_clock(host, ios->clock);
-
-	if (ios->power_mode == MMC_POWER_OFF)
-		vdd_bit = sdhci_set_power(host, -1);
-	else
-		vdd_bit = sdhci_set_power(host, ios->vdd);
-
-	if (host->vmmc && vdd_bit != -1) {
-		spin_unlock_irqrestore(&host->lock, flags);
-		mmc_regulator_set_ocr(host->mmc, host->vmmc, vdd_bit);
-		spin_lock_irqsave(&host->lock, flags);
+	if (!ios->clock || ios->clock != host->clock) {
+		host->ops->set_clock(host, ios->clock);
+		host->clock = ios->clock;
 	}
 
+	sdhci_set_power(host, ios->power_mode, ios->vdd);
+
 	if (host->ops->platform_send_init_74_clocks)
 		host->ops->platform_send_init_74_clocks(host, ios->power_mode);
 
-	/*
-	 * If your platform has 8-bit width support but is not a v3 controller,
-	 * or if it requires special setup code, you should implement that in
-	 * platform_bus_width().
-	 */
-	if (host->ops->platform_bus_width) {
-		host->ops->platform_bus_width(host, ios->bus_width);
-	} else {
-		ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
-		if (ios->bus_width == MMC_BUS_WIDTH_8) {
-			ctrl &= ~SDHCI_CTRL_4BITBUS;
-			if (host->version >= SDHCI_SPEC_300)
-				ctrl |= SDHCI_CTRL_8BITBUS;
-		} else {
-			if (host->version >= SDHCI_SPEC_300)
-				ctrl &= ~SDHCI_CTRL_8BITBUS;
-			if (ios->bus_width == MMC_BUS_WIDTH_4)
-				ctrl |= SDHCI_CTRL_4BITBUS;
-			else
-				ctrl &= ~SDHCI_CTRL_4BITBUS;
-		}
-		sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
-	}
+	host->ops->set_bus_width(host, ios->bus_width);
 
 	ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
 
@@ -1510,19 +1490,20 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
 
 		/* In case of UHS-I modes, set High Speed Enable */
 		if ((ios->timing == MMC_TIMING_MMC_HS200) ||
+		    (ios->timing == MMC_TIMING_MMC_DDR52) ||
 		    (ios->timing == MMC_TIMING_UHS_SDR50) ||
 		    (ios->timing == MMC_TIMING_UHS_SDR104) ||
 		    (ios->timing == MMC_TIMING_UHS_DDR50) ||
 		    (ios->timing == MMC_TIMING_UHS_SDR25))
 			ctrl |= SDHCI_CTRL_HISPD;
 
-		ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
-		if (!(ctrl_2 & SDHCI_CTRL_PRESET_VAL_ENABLE)) {
+		if (!host->preset_enabled) {
 			sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
 			/*
 			 * We only need to set Driver Strength if the
 			 * preset value enable is not set.
 			 */
+			ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
 			ctrl_2 &= ~SDHCI_CTRL_DRV_TYPE_MASK;
 			if (ios->drv_type == MMC_SET_DRIVER_TYPE_A)
 				ctrl_2 |= SDHCI_CTRL_DRV_TYPE_A;
@@ -1546,7 +1527,7 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
 			sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
 
 			/* Re-enable SD Clock */
-			sdhci_update_clock(host);
+			host->ops->set_clock(host, host->clock);
 		}
 
 
@@ -1555,25 +1536,8 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
 		clk &= ~SDHCI_CLOCK_CARD_EN;
 		sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
 
-		if (host->ops->set_uhs_signaling)
-			host->ops->set_uhs_signaling(host, ios->timing);
-		else {
-			ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
-			/* Select Bus Speed Mode for host */
-			ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
-			if ((ios->timing == MMC_TIMING_MMC_HS200) ||
-			    (ios->timing == MMC_TIMING_UHS_SDR104))
-				ctrl_2 |= SDHCI_CTRL_UHS_SDR104;
-			else if (ios->timing == MMC_TIMING_UHS_SDR12)
-				ctrl_2 |= SDHCI_CTRL_UHS_SDR12;
-			else if (ios->timing == MMC_TIMING_UHS_SDR25)
-				ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
-			else if (ios->timing == MMC_TIMING_UHS_SDR50)
-				ctrl_2 |= SDHCI_CTRL_UHS_SDR50;
-			else if (ios->timing == MMC_TIMING_UHS_DDR50)
-				ctrl_2 |= SDHCI_CTRL_UHS_DDR50;
-			sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
-		}
+		host->ops->set_uhs_signaling(host, ios->timing);
+		host->timing = ios->timing;
 
 		if (!(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN) &&
 				((ios->timing == MMC_TIMING_UHS_SDR12) ||
@@ -1590,7 +1554,7 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
 		}
 
 		/* Re-enable SD Clock */
-		sdhci_update_clock(host);
+		host->ops->set_clock(host, host->clock);
 	} else
 		sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
 
@@ -1600,7 +1564,7 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
 	 * it on each ios seems to solve the problem.
 	 */
 	if(host->quirks & SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS)
-		sdhci_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
+		sdhci_do_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
 
 	mmiowb();
 	spin_unlock_irqrestore(&host->lock, flags);
@@ -1709,24 +1673,16 @@ static int sdhci_get_ro(struct mmc_host *mmc)
 
 static void sdhci_enable_sdio_irq_nolock(struct sdhci_host *host, int enable)
 {
-	if (host->flags & SDHCI_DEVICE_DEAD)
-		goto out;
-
-	if (enable)
-		host->flags |= SDHCI_SDIO_IRQ_ENABLED;
-	else
-		host->flags &= ~SDHCI_SDIO_IRQ_ENABLED;
-
-	/* SDIO IRQ will be enabled as appropriate in runtime resume */
-	if (host->runtime_suspended)
-		goto out;
+	if (!(host->flags & SDHCI_DEVICE_DEAD)) {
+		if (enable)
+			host->ier |= SDHCI_INT_CARD_INT;
+		else
+			host->ier &= ~SDHCI_INT_CARD_INT;
 
-	if (enable)
-		sdhci_unmask_irqs(host, SDHCI_INT_CARD_INT);
-	else
-		sdhci_mask_irqs(host, SDHCI_INT_CARD_INT);
-out:
-	mmiowb();
+		sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
+		sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
+		mmiowb();
+	}
 }
 
 static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
@@ -1734,9 +1690,18 @@ static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
 	struct sdhci_host *host = mmc_priv(mmc);
 	unsigned long flags;
 
+	sdhci_runtime_pm_get(host);
+
 	spin_lock_irqsave(&host->lock, flags);
+	if (enable)
+		host->flags |= SDHCI_SDIO_IRQ_ENABLED;
+	else
+		host->flags &= ~SDHCI_SDIO_IRQ_ENABLED;
+
 	sdhci_enable_sdio_irq_nolock(host, enable);
 	spin_unlock_irqrestore(&host->lock, flags);
+
+	sdhci_runtime_pm_put(host);
 }
 
 static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
@@ -1855,22 +1820,15 @@ static int sdhci_card_busy(struct mmc_host *mmc)
 
 static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
 {
-	struct sdhci_host *host;
+	struct sdhci_host *host = mmc_priv(mmc);
 	u16 ctrl;
-	u32 ier;
 	int tuning_loop_counter = MAX_TUNING_LOOP;
-	unsigned long timeout;
 	int err = 0;
-	bool requires_tuning_nonuhs = false;
 	unsigned long flags;
 
-	host = mmc_priv(mmc);
-
 	sdhci_runtime_pm_get(host);
 	spin_lock_irqsave(&host->lock, flags);
 
-	ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
-
 	/*
 	 * The Host Controller needs tuning only in case of SDR104 mode
 	 * and for SDR50 mode when Use Tuning for SDR50 is set in the
@@ -1878,15 +1836,18 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
 	 * If the Host Controller supports the HS200 mode then the
 	 * tuning function has to be executed.
 	 */
-	if (((ctrl & SDHCI_CTRL_UHS_MASK) == SDHCI_CTRL_UHS_SDR50) &&
-	    (host->flags & SDHCI_SDR50_NEEDS_TUNING ||
-	     host->flags & SDHCI_SDR104_NEEDS_TUNING))
-		requires_tuning_nonuhs = true;
-
-	if (((ctrl & SDHCI_CTRL_UHS_MASK) == SDHCI_CTRL_UHS_SDR104) ||
-	    requires_tuning_nonuhs)
-		ctrl |= SDHCI_CTRL_EXEC_TUNING;
-	else {
+	switch (host->timing) {
+	case MMC_TIMING_MMC_HS200:
+	case MMC_TIMING_UHS_SDR104:
+		break;
+
+	case MMC_TIMING_UHS_SDR50:
+		if (host->flags & SDHCI_SDR50_NEEDS_TUNING ||
+		    host->flags & SDHCI_SDR104_NEEDS_TUNING)
+			break;
+		/* FALLTHROUGH */
+
+	default:
 		spin_unlock_irqrestore(&host->lock, flags);
 		sdhci_runtime_pm_put(host);
 		return 0;
@@ -1899,6 +1860,8 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
 		return err;
 	}
 
+	ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+	ctrl |= SDHCI_CTRL_EXEC_TUNING;
 	sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
 
 	/*
@@ -1911,21 +1874,17 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
 	 * to make sure we don't hit a controller bug, we _only_
 	 * enable Buffer Read Ready interrupt here.
 	 */
-	ier = sdhci_readl(host, SDHCI_INT_ENABLE);
-	sdhci_clear_set_irqs(host, ier, SDHCI_INT_DATA_AVAIL);
+	sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_INT_ENABLE);
+	sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_SIGNAL_ENABLE);
 
 	/*
 	 * Issue CMD19 repeatedly till Execute Tuning is set to 0 or the number
 	 * of loops reaches 40 times or a timeout of 150ms occurs.
 	 */
-	timeout = 150;
 	do {
 		struct mmc_command cmd = {0};
 		struct mmc_request mrq = {NULL};
 
-		if (!tuning_loop_counter && !timeout)
-			break;
-
 		cmd.opcode = opcode;
 		cmd.arg = 0;
 		cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
@@ -1933,6 +1892,9 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
 		cmd.data = NULL;
 		cmd.error = 0;
 
+		if (tuning_loop_counter-- == 0)
+			break;
+
 		mrq.cmd = &cmd;
 		host->mrq = &mrq;
 
@@ -1990,26 +1952,25 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
 		host->tuning_done = 0;
 
 		ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
-		tuning_loop_counter--;
-		timeout--;
-		mdelay(1);
+
+		/* eMMC spec does not require a delay between tuning cycles */
+		if (opcode == MMC_SEND_TUNING_BLOCK)
+			mdelay(1);
 	} while (ctrl & SDHCI_CTRL_EXEC_TUNING);
 
 	/*
 	 * The Host Driver has exhausted the maximum number of loops allowed,
 	 * so use fixed sampling frequency.
 	 */
-	if (!tuning_loop_counter || !timeout) {
+	if (tuning_loop_counter < 0) {
 		ctrl &= ~SDHCI_CTRL_TUNED_CLK;
 		sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
+	}
+	if (!(ctrl & SDHCI_CTRL_TUNED_CLK)) {
+		pr_info(DRIVER_NAME ": Tuning procedure"
+			" failed, falling back to fixed sampling"
+			" clock\n");
 		err = -EIO;
-	} else {
-		if (!(ctrl & SDHCI_CTRL_TUNED_CLK)) {
-			pr_info(DRIVER_NAME ": Tuning procedure"
-				" failed, falling back to fixed sampling"
-				" clock\n");
-			err = -EIO;
-		}
 	}
 
 out:
@@ -2044,7 +2005,8 @@ out:
 	if (err && (host->flags & SDHCI_USING_RETUNING_TIMER))
 		err = 0;
 
-	sdhci_clear_set_irqs(host, SDHCI_INT_DATA_AVAIL, ier);
+	sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
+	sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
 	spin_unlock_irqrestore(&host->lock, flags);
 	sdhci_runtime_pm_put(host);
 
@@ -2054,26 +2016,30 @@ out:
 
 static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable)
 {
-	u16 ctrl;
-
 	/* Host Controller v3.00 defines preset value registers */
 	if (host->version < SDHCI_SPEC_300)
 		return;
 
-	ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
-
 	/*
 	 * We only enable or disable Preset Value if they are not already
 	 * enabled or disabled respectively. Otherwise, we bail out.
 	 */
-	if (enable && !(ctrl & SDHCI_CTRL_PRESET_VAL_ENABLE)) {
-		ctrl |= SDHCI_CTRL_PRESET_VAL_ENABLE;
-		sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
-		host->flags |= SDHCI_PV_ENABLED;
-	} else if (!enable && (ctrl & SDHCI_CTRL_PRESET_VAL_ENABLE)) {
-		ctrl &= ~SDHCI_CTRL_PRESET_VAL_ENABLE;
+	if (host->preset_enabled != enable) {
+		u16 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+
+		if (enable)
+			ctrl |= SDHCI_CTRL_PRESET_VAL_ENABLE;
+		else
+			ctrl &= ~SDHCI_CTRL_PRESET_VAL_ENABLE;
+
 		sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
-		host->flags &= ~SDHCI_PV_ENABLED;
+
+		if (enable)
+			host->flags |= SDHCI_PV_ENABLED;
+		else
+			host->flags &= ~SDHCI_PV_ENABLED;
+
+		host->preset_enabled = enable;
 	}
 }
 
@@ -2095,8 +2061,8 @@ static void sdhci_card_event(struct mmc_host *mmc)
 		pr_err("%s: Resetting controller.\n",
 			mmc_hostname(host->mmc));
 
-		sdhci_reset(host, SDHCI_RESET_CMD);
-		sdhci_reset(host, SDHCI_RESET_DATA);
+		sdhci_do_reset(host, SDHCI_RESET_CMD);
+		sdhci_do_reset(host, SDHCI_RESET_DATA);
 
 		host->mrq->cmd->error = -ENOMEDIUM;
 		tasklet_schedule(&host->finish_tasklet);
@@ -2124,15 +2090,6 @@ static const struct mmc_host_ops sdhci_ops = {
  *                                                                           *
 \*****************************************************************************/
 
-static void sdhci_tasklet_card(unsigned long param)
-{
-	struct sdhci_host *host = (struct sdhci_host*)param;
-
-	sdhci_card_event(host->mmc);
-
-	mmc_detect_change(host->mmc, msecs_to_jiffies(200));
-}
-
 static void sdhci_tasklet_finish(unsigned long param)
 {
 	struct sdhci_host *host;
@@ -2169,12 +2126,12 @@ static void sdhci_tasklet_finish(unsigned long param)
 		/* Some controllers need this kick or reset won't work here */
 		if (host->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET)
 			/* This is to force an update */
-			sdhci_update_clock(host);
+			host->ops->set_clock(host, host->clock);
 
 		/* Spec says we should do both at the same time, but Ricoh
 		   controllers do not like that. */
-		sdhci_reset(host, SDHCI_RESET_CMD);
-		sdhci_reset(host, SDHCI_RESET_DATA);
+		sdhci_do_reset(host, SDHCI_RESET_CMD);
+		sdhci_do_reset(host, SDHCI_RESET_DATA);
 	}
 
 	host->mrq = NULL;
@@ -2424,101 +2381,94 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
 
 static irqreturn_t sdhci_irq(int irq, void *dev_id)
 {
-	irqreturn_t result;
+	irqreturn_t result = IRQ_NONE;
 	struct sdhci_host *host = dev_id;
-	u32 intmask, unexpected = 0;
-	int cardint = 0, max_loops = 16;
+	u32 intmask, mask, unexpected = 0;
+	int max_loops = 16;
 
 	spin_lock(&host->lock);
 
-	if (host->runtime_suspended) {
+	if (host->runtime_suspended && !sdhci_sdio_irq_enabled(host)) {
 		spin_unlock(&host->lock);
 		return IRQ_NONE;
 	}
 
 	intmask = sdhci_readl(host, SDHCI_INT_STATUS);
-
 	if (!intmask || intmask == 0xffffffff) {
 		result = IRQ_NONE;
 		goto out;
 	}
 
-again:
-	DBG("*** %s got interrupt: 0x%08x\n",
-		mmc_hostname(host->mmc), intmask);
-
-	if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) {
-		u32 present = sdhci_readl(host, SDHCI_PRESENT_STATE) &
-			      SDHCI_CARD_PRESENT;
-
-		/*
-		 * There is a observation on i.mx esdhc.  INSERT bit will be
-		 * immediately set again when it gets cleared, if a card is
-		 * inserted.  We have to mask the irq to prevent interrupt
-		 * storm which will freeze the system.  And the REMOVE gets
-		 * the same situation.
-		 *
-		 * More testing are needed here to ensure it works for other
-		 * platforms though.
-		 */
-		sdhci_mask_irqs(host, present ? SDHCI_INT_CARD_INSERT :
-						SDHCI_INT_CARD_REMOVE);
-		sdhci_unmask_irqs(host, present ? SDHCI_INT_CARD_REMOVE :
-						  SDHCI_INT_CARD_INSERT);
-
-		sdhci_writel(host, intmask & (SDHCI_INT_CARD_INSERT |
-			     SDHCI_INT_CARD_REMOVE), SDHCI_INT_STATUS);
-		intmask &= ~(SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE);
-		tasklet_schedule(&host->card_tasklet);
-	}
-
-	if (intmask & SDHCI_INT_CMD_MASK) {
-		sdhci_writel(host, intmask & SDHCI_INT_CMD_MASK,
-			SDHCI_INT_STATUS);
-		sdhci_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK);
-	}
+	do {
+		/* Clear selected interrupts. */
+		mask = intmask & (SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK |
+				  SDHCI_INT_BUS_POWER);
+		sdhci_writel(host, mask, SDHCI_INT_STATUS);
 
-	if (intmask & SDHCI_INT_DATA_MASK) {
-		sdhci_writel(host, intmask & SDHCI_INT_DATA_MASK,
-			SDHCI_INT_STATUS);
-		sdhci_data_irq(host, intmask & SDHCI_INT_DATA_MASK);
-	}
+		DBG("*** %s got interrupt: 0x%08x\n",
+			mmc_hostname(host->mmc), intmask);
 
-	intmask &= ~(SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK);
+		if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) {
+			u32 present = sdhci_readl(host, SDHCI_PRESENT_STATE) &
+				      SDHCI_CARD_PRESENT;
 
-	intmask &= ~SDHCI_INT_ERROR;
+			/*
+			 * There is a observation on i.mx esdhc.  INSERT
+			 * bit will be immediately set again when it gets
+			 * cleared, if a card is inserted.  We have to mask
+			 * the irq to prevent interrupt storm which will
+			 * freeze the system.  And the REMOVE gets the
+			 * same situation.
+			 *
+			 * More testing are needed here to ensure it works
+			 * for other platforms though.
+			 */
+			host->ier &= ~(SDHCI_INT_CARD_INSERT |
+				       SDHCI_INT_CARD_REMOVE);
+			host->ier |= present ? SDHCI_INT_CARD_REMOVE :
+					       SDHCI_INT_CARD_INSERT;
+			sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
+			sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
+
+			sdhci_writel(host, intmask & (SDHCI_INT_CARD_INSERT |
+				     SDHCI_INT_CARD_REMOVE), SDHCI_INT_STATUS);
+
+			host->thread_isr |= intmask & (SDHCI_INT_CARD_INSERT |
+						       SDHCI_INT_CARD_REMOVE);
+			result = IRQ_WAKE_THREAD;
+		}
 
-	if (intmask & SDHCI_INT_BUS_POWER) {
-		pr_err("%s: Card is consuming too much power!\n",
-			mmc_hostname(host->mmc));
-		sdhci_writel(host, SDHCI_INT_BUS_POWER, SDHCI_INT_STATUS);
-	}
+		if (intmask & SDHCI_INT_CMD_MASK)
+			sdhci_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK);
 
-	intmask &= ~SDHCI_INT_BUS_POWER;
+		if (intmask & SDHCI_INT_DATA_MASK)
+			sdhci_data_irq(host, intmask & SDHCI_INT_DATA_MASK);
 
-	if (intmask & SDHCI_INT_CARD_INT)
-		cardint = 1;
+		if (intmask & SDHCI_INT_BUS_POWER)
+			pr_err("%s: Card is consuming too much power!\n",
+				mmc_hostname(host->mmc));
 
-	intmask &= ~SDHCI_INT_CARD_INT;
+		if (intmask & SDHCI_INT_CARD_INT) {
+			sdhci_enable_sdio_irq_nolock(host, false);
+			host->thread_isr |= SDHCI_INT_CARD_INT;
+			result = IRQ_WAKE_THREAD;
+		}
 
-	if (intmask) {
-		unexpected |= intmask;
-		sdhci_writel(host, intmask, SDHCI_INT_STATUS);
-	}
+		intmask &= ~(SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE |
+			     SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK |
+			     SDHCI_INT_ERROR | SDHCI_INT_BUS_POWER |
+			     SDHCI_INT_CARD_INT);
 
-	result = IRQ_HANDLED;
+		if (intmask) {
+			unexpected |= intmask;
+			sdhci_writel(host, intmask, SDHCI_INT_STATUS);
+		}
 
-	intmask = sdhci_readl(host, SDHCI_INT_STATUS);
+		if (result == IRQ_NONE)
+			result = IRQ_HANDLED;
 
-	/*
-	 * If we know we'll call the driver to signal SDIO IRQ, disregard
-	 * further indications of Card Interrupt in the status to avoid a
-	 * needless loop.
-	 */
-	if (cardint)
-		intmask &= ~SDHCI_INT_CARD_INT;
-	if (intmask && --max_loops)
-		goto again;
+		intmask = sdhci_readl(host, SDHCI_INT_STATUS);
+	} while (intmask && --max_loops);
 out:
 	spin_unlock(&host->lock);
 
@@ -2527,15 +2477,38 @@ out:
 			   mmc_hostname(host->mmc), unexpected);
 		sdhci_dumpregs(host);
 	}
-	/*
-	 * We have to delay this as it calls back into the driver.
-	 */
-	if (cardint)
-		mmc_signal_sdio_irq(host->mmc);
 
 	return result;
 }
 
+static irqreturn_t sdhci_thread_irq(int irq, void *dev_id)
+{
+	struct sdhci_host *host = dev_id;
+	unsigned long flags;
+	u32 isr;
+
+	spin_lock_irqsave(&host->lock, flags);
+	isr = host->thread_isr;
+	host->thread_isr = 0;
+	spin_unlock_irqrestore(&host->lock, flags);
+
+	if (isr & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) {
+		sdhci_card_event(host->mmc);
+		mmc_detect_change(host->mmc, msecs_to_jiffies(200));
+	}
+
+	if (isr & SDHCI_INT_CARD_INT) {
+		sdio_run_irqs(host->mmc);
+
+		spin_lock_irqsave(&host->lock, flags);
+		if (host->flags & SDHCI_SDIO_IRQ_ENABLED)
+			sdhci_enable_sdio_irq_nolock(host, true);
+		spin_unlock_irqrestore(&host->lock, flags);
+	}
+
+	return isr ? IRQ_HANDLED : IRQ_NONE;
+}
+
 /*****************************************************************************\
  *                                                                           *
  * Suspend/resume                                                            *
@@ -2572,9 +2545,6 @@ EXPORT_SYMBOL_GPL(sdhci_disable_irq_wakeups);
 
 int sdhci_suspend_host(struct sdhci_host *host)
 {
-	if (host->ops->platform_suspend)
-		host->ops->platform_suspend(host);
-
 	sdhci_disable_card_detection(host);
 
 	/* Disable tuning since we are suspending */
@@ -2584,7 +2554,9 @@ int sdhci_suspend_host(struct sdhci_host *host)
 	}
 
 	if (!device_may_wakeup(mmc_dev(host->mmc))) {
-		sdhci_mask_irqs(host, SDHCI_INT_ALL_MASK);
+		host->ier = 0;
+		sdhci_writel(host, 0, SDHCI_INT_ENABLE);
+		sdhci_writel(host, 0, SDHCI_SIGNAL_ENABLE);
 		free_irq(host->irq, host);
 	} else {
 		sdhci_enable_irq_wakeups(host);
@@ -2605,8 +2577,9 @@ int sdhci_resume_host(struct sdhci_host *host)
 	}
 
 	if (!device_may_wakeup(mmc_dev(host->mmc))) {
-		ret = request_irq(host->irq, sdhci_irq, IRQF_SHARED,
-				  mmc_hostname(host->mmc), host);
+		ret = request_threaded_irq(host->irq, sdhci_irq,
+					   sdhci_thread_irq, IRQF_SHARED,
+					   mmc_hostname(host->mmc), host);
 		if (ret)
 			return ret;
 	} else {
@@ -2628,9 +2601,6 @@ int sdhci_resume_host(struct sdhci_host *host)
 
 	sdhci_enable_card_detection(host);
 
-	if (host->ops->platform_resume)
-		host->ops->platform_resume(host);
-
 	/* Set the re-tuning expiration flag */
 	if (host->flags & SDHCI_USING_RETUNING_TIMER)
 		host->flags |= SDHCI_NEEDS_RETUNING;
@@ -2682,10 +2652,12 @@ int sdhci_runtime_suspend_host(struct sdhci_host *host)
 	}
 
 	spin_lock_irqsave(&host->lock, flags);
-	sdhci_mask_irqs(host, SDHCI_INT_ALL_MASK);
+	host->ier &= SDHCI_INT_CARD_INT;
+	sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
+	sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
 	spin_unlock_irqrestore(&host->lock, flags);
 
-	synchronize_irq(host->irq);
+	synchronize_hardirq(host->irq);
 
 	spin_lock_irqsave(&host->lock, flags);
 	host->runtime_suspended = true;
@@ -2729,7 +2701,7 @@ int sdhci_runtime_resume_host(struct sdhci_host *host)
 	host->runtime_suspended = false;
 
 	/* Enable SDIO IRQ */
-	if ((host->flags & SDHCI_SDIO_IRQ_ENABLED))
+	if (host->flags & SDHCI_SDIO_IRQ_ENABLED)
 		sdhci_enable_sdio_irq_nolock(host, true);
 
 	/* Enable Card Detection */
@@ -2788,7 +2760,7 @@ int sdhci_add_host(struct sdhci_host *host)
 	if (debug_quirks2)
 		host->quirks2 = debug_quirks2;
 
-	sdhci_reset(host, SDHCI_RESET_ALL);
+	sdhci_do_reset(host, SDHCI_RESET_ALL);
 
 	host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
 	host->version = (host->version & SDHCI_SPEC_VER_MASK)
@@ -2848,15 +2820,29 @@ int sdhci_add_host(struct sdhci_host *host)
 		 * (128) and potentially one alignment transfer for
 		 * each of those entries.
 		 */
-		host->adma_desc = kmalloc((128 * 2 + 1) * 4, GFP_KERNEL);
+		host->adma_desc = dma_alloc_coherent(mmc_dev(host->mmc),
+						     ADMA_SIZE, &host->adma_addr,
+						     GFP_KERNEL);
 		host->align_buffer = kmalloc(128 * 4, GFP_KERNEL);
 		if (!host->adma_desc || !host->align_buffer) {
-			kfree(host->adma_desc);
+			dma_free_coherent(mmc_dev(host->mmc), ADMA_SIZE,
+					  host->adma_desc, host->adma_addr);
 			kfree(host->align_buffer);
 			pr_warning("%s: Unable to allocate ADMA "
 				"buffers. Falling back to standard DMA.\n",
 				mmc_hostname(mmc));
 			host->flags &= ~SDHCI_USE_ADMA;
+			host->adma_desc = NULL;
+			host->align_buffer = NULL;
+		} else if (host->adma_addr & 3) {
+			pr_warning("%s: unable to allocate aligned ADMA descriptor\n",
+				   mmc_hostname(mmc));
+			host->flags &= ~SDHCI_USE_ADMA;
+			dma_free_coherent(mmc_dev(host->mmc), ADMA_SIZE,
+					  host->adma_desc, host->adma_addr);
+			kfree(host->align_buffer);
+			host->adma_desc = NULL;
+			host->align_buffer = NULL;
 		}
 	}
 
@@ -2941,6 +2927,7 @@ int sdhci_add_host(struct sdhci_host *host)
 	mmc->max_busy_timeout = (1 << 27) / host->timeout_clk;
 
 	mmc->caps |= MMC_CAP_SDIO_IRQ | MMC_CAP_ERASE | MMC_CAP_CMD23;
+	mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD;
 
 	if (host->quirks & SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12)
 		host->flags |= SDHCI_AUTO_CMD12;
@@ -3212,8 +3199,6 @@ int sdhci_add_host(struct sdhci_host *host)
 	/*
 	 * Init tasklets.
 	 */
-	tasklet_init(&host->card_tasklet,
-		sdhci_tasklet_card, (unsigned long)host);
 	tasklet_init(&host->finish_tasklet,
 		sdhci_tasklet_finish, (unsigned long)host);
 
@@ -3230,8 +3215,8 @@ int sdhci_add_host(struct sdhci_host *host)
 
 	sdhci_init(host, 0);
 
-	ret = request_irq(host->irq, sdhci_irq, IRQF_SHARED,
-		mmc_hostname(mmc), host);
+	ret = request_threaded_irq(host->irq, sdhci_irq, sdhci_thread_irq,
+				   IRQF_SHARED,	mmc_hostname(mmc), host);
 	if (ret) {
 		pr_err("%s: Failed to request IRQ %d: %d\n",
 		       mmc_hostname(mmc), host->irq, ret);
@@ -3273,12 +3258,12 @@ int sdhci_add_host(struct sdhci_host *host)
 
 #ifdef SDHCI_USE_LEDS_CLASS
 reset:
-	sdhci_reset(host, SDHCI_RESET_ALL);
-	sdhci_mask_irqs(host, SDHCI_INT_ALL_MASK);
+	sdhci_do_reset(host, SDHCI_RESET_ALL);
+	sdhci_writel(host, 0, SDHCI_INT_ENABLE);
+	sdhci_writel(host, 0, SDHCI_SIGNAL_ENABLE);
 	free_irq(host->irq, host);
 #endif
 untasklet:
-	tasklet_kill(&host->card_tasklet);
 	tasklet_kill(&host->finish_tasklet);
 
 	return ret;
@@ -3315,14 +3300,14 @@ void sdhci_remove_host(struct sdhci_host *host, int dead)
 #endif
 
 	if (!dead)
-		sdhci_reset(host, SDHCI_RESET_ALL);
+		sdhci_do_reset(host, SDHCI_RESET_ALL);
 
-	sdhci_mask_irqs(host, SDHCI_INT_ALL_MASK);
+	sdhci_writel(host, 0, SDHCI_INT_ENABLE);
+	sdhci_writel(host, 0, SDHCI_SIGNAL_ENABLE);
 	free_irq(host->irq, host);
 
 	del_timer_sync(&host->timer);
 
-	tasklet_kill(&host->card_tasklet);
 	tasklet_kill(&host->finish_tasklet);
 
 	if (host->vmmc) {
@@ -3335,7 +3320,9 @@ void sdhci_remove_host(struct sdhci_host *host, int dead)
 		regulator_put(host->vqmmc);
 	}
 
-	kfree(host->adma_desc);
+	if (host->adma_desc)
+		dma_free_coherent(mmc_dev(host->mmc), ADMA_SIZE,
+				  host->adma_desc, host->adma_addr);
 	kfree(host->align_buffer);
 
 	host->adma_desc = NULL;

drivers/mmc/host/sdhci.h

@@ -281,18 +281,14 @@ struct sdhci_ops {
 	unsigned int	(*get_max_clock)(struct sdhci_host *host);
 	unsigned int	(*get_min_clock)(struct sdhci_host *host);
 	unsigned int	(*get_timeout_clock)(struct sdhci_host *host);
-	int		(*platform_bus_width)(struct sdhci_host *host,
-					       int width);
+	void		(*set_bus_width)(struct sdhci_host *host, int width);
 	void (*platform_send_init_74_clocks)(struct sdhci_host *host,
 					     u8 power_mode);
 	unsigned int    (*get_ro)(struct sdhci_host *host);
-	void	(*platform_reset_enter)(struct sdhci_host *host, u8 mask);
-	void	(*platform_reset_exit)(struct sdhci_host *host, u8 mask);
+	void		(*reset)(struct sdhci_host *host, u8 mask);
 	int	(*platform_execute_tuning)(struct sdhci_host *host, u32 opcode);
-	int	(*set_uhs_signaling)(struct sdhci_host *host, unsigned int uhs);
+	void	(*set_uhs_signaling)(struct sdhci_host *host, unsigned int uhs);
 	void	(*hw_reset)(struct sdhci_host *host);
-	void	(*platform_suspend)(struct sdhci_host *host);
-	void	(*platform_resume)(struct sdhci_host *host);
 	void    (*adma_workaround)(struct sdhci_host *host, u32 intmask);
 	void	(*platform_init)(struct sdhci_host *host);
 	void    (*card_event)(struct sdhci_host *host);
@@ -397,6 +393,16 @@ extern void sdhci_remove_host(struct sdhci_host *host, int dead);
 extern void sdhci_send_command(struct sdhci_host *host,
 				struct mmc_command *cmd);
 
+static inline bool sdhci_sdio_irq_enabled(struct sdhci_host *host)
+{
+	return !!(host->flags & SDHCI_SDIO_IRQ_ENABLED);
+}
+
+void sdhci_set_clock(struct sdhci_host *host, unsigned int clock);
+void sdhci_set_bus_width(struct sdhci_host *host, int width);
+void sdhci_reset(struct sdhci_host *host, u8 mask);
+void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing);
+
 #ifdef CONFIG_PM
 extern int sdhci_suspend_host(struct sdhci_host *host);
 extern int sdhci_resume_host(struct sdhci_host *host);

drivers/mmc/host/sh_mmcif.c

@@ -803,12 +803,13 @@ static u32 sh_mmcif_set_cmd(struct sh_mmcif_host *host,
 			break;
 		}
 		switch (host->timing) {
-		case MMC_TIMING_UHS_DDR50:
+		case MMC_TIMING_MMC_DDR52:
 			/*
 			 * MMC core will only set this timing, if the host
-			 * advertises the MMC_CAP_UHS_DDR50 capability. MMCIF
-			 * implementations with this capability, e.g. sh73a0,
-			 * will have to set it in their platform data.
+			 * advertises the MMC_CAP_1_8V_DDR/MMC_CAP_1_2V_DDR
+			 * capability. MMCIF implementations with this
+			 * capability, e.g. sh73a0, will have to set it
+			 * in their platform data.
 			 */
 			tmp |= CMD_SET_DARS;
 			break;

drivers/mmc/host/usdhi6rol0.c

@@ -0,0 +1,1847 @@
+/*
+ * Copyright (C) 2013-2014 Renesas Electronics Europe Ltd.
+ * Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/highmem.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/log2.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/sd.h>
+#include <linux/mmc/sdio.h>
+#include <linux/module.h>
+#include <linux/pagemap.h>
+#include <linux/platform_device.h>
+#include <linux/scatterlist.h>
+#include <linux/string.h>
+#include <linux/time.h>
+#include <linux/virtio.h>
+#include <linux/workqueue.h>
+
+#define USDHI6_SD_CMD		0x0000
+#define USDHI6_SD_PORT_SEL	0x0004
+#define USDHI6_SD_ARG		0x0008
+#define USDHI6_SD_STOP		0x0010
+#define USDHI6_SD_SECCNT	0x0014
+#define USDHI6_SD_RSP10		0x0018
+#define USDHI6_SD_RSP32		0x0020
+#define USDHI6_SD_RSP54		0x0028
+#define USDHI6_SD_RSP76		0x0030
+#define USDHI6_SD_INFO1		0x0038
+#define USDHI6_SD_INFO2		0x003c
+#define USDHI6_SD_INFO1_MASK	0x0040
+#define USDHI6_SD_INFO2_MASK	0x0044
+#define USDHI6_SD_CLK_CTRL	0x0048
+#define USDHI6_SD_SIZE		0x004c
+#define USDHI6_SD_OPTION	0x0050
+#define USDHI6_SD_ERR_STS1	0x0058
+#define USDHI6_SD_ERR_STS2	0x005c
+#define USDHI6_SD_BUF0		0x0060
+#define USDHI6_SDIO_MODE	0x0068
+#define USDHI6_SDIO_INFO1	0x006c
+#define USDHI6_SDIO_INFO1_MASK	0x0070
+#define USDHI6_CC_EXT_MODE	0x01b0
+#define USDHI6_SOFT_RST		0x01c0
+#define USDHI6_VERSION		0x01c4
+#define USDHI6_HOST_MODE	0x01c8
+#define USDHI6_SDIF_MODE	0x01cc
+
+#define USDHI6_SD_CMD_APP		0x0040
+#define USDHI6_SD_CMD_MODE_RSP_AUTO	0x0000
+#define USDHI6_SD_CMD_MODE_RSP_NONE	0x0300
+#define USDHI6_SD_CMD_MODE_RSP_R1	0x0400	/* Also R5, R6, R7 */
+#define USDHI6_SD_CMD_MODE_RSP_R1B	0x0500	/* R1b */
+#define USDHI6_SD_CMD_MODE_RSP_R2	0x0600
+#define USDHI6_SD_CMD_MODE_RSP_R3	0x0700	/* Also R4 */
+#define USDHI6_SD_CMD_DATA		0x0800
+#define USDHI6_SD_CMD_READ		0x1000
+#define USDHI6_SD_CMD_MULTI		0x2000
+#define USDHI6_SD_CMD_CMD12_AUTO_OFF	0x4000
+
+#define USDHI6_CC_EXT_MODE_SDRW		BIT(1)
+
+#define USDHI6_SD_INFO1_RSP_END		BIT(0)
+#define USDHI6_SD_INFO1_ACCESS_END	BIT(2)
+#define USDHI6_SD_INFO1_CARD_OUT	BIT(3)
+#define USDHI6_SD_INFO1_CARD_IN		BIT(4)
+#define USDHI6_SD_INFO1_CD		BIT(5)
+#define USDHI6_SD_INFO1_WP		BIT(7)
+#define USDHI6_SD_INFO1_D3_CARD_OUT	BIT(8)
+#define USDHI6_SD_INFO1_D3_CARD_IN	BIT(9)
+
+#define USDHI6_SD_INFO2_CMD_ERR		BIT(0)
+#define USDHI6_SD_INFO2_CRC_ERR		BIT(1)
+#define USDHI6_SD_INFO2_END_ERR		BIT(2)
+#define USDHI6_SD_INFO2_TOUT		BIT(3)
+#define USDHI6_SD_INFO2_IWA_ERR		BIT(4)
+#define USDHI6_SD_INFO2_IRA_ERR		BIT(5)
+#define USDHI6_SD_INFO2_RSP_TOUT	BIT(6)
+#define USDHI6_SD_INFO2_SDDAT0		BIT(7)
+#define USDHI6_SD_INFO2_BRE		BIT(8)
+#define USDHI6_SD_INFO2_BWE		BIT(9)
+#define USDHI6_SD_INFO2_SCLKDIVEN	BIT(13)
+#define USDHI6_SD_INFO2_CBSY		BIT(14)
+#define USDHI6_SD_INFO2_ILA		BIT(15)
+
+#define USDHI6_SD_INFO1_CARD_INSERT (USDHI6_SD_INFO1_CARD_IN | USDHI6_SD_INFO1_D3_CARD_IN)
+#define USDHI6_SD_INFO1_CARD_EJECT (USDHI6_SD_INFO1_CARD_OUT | USDHI6_SD_INFO1_D3_CARD_OUT)
+#define USDHI6_SD_INFO1_CARD (USDHI6_SD_INFO1_CARD_INSERT | USDHI6_SD_INFO1_CARD_EJECT)
+#define USDHI6_SD_INFO1_CARD_CD (USDHI6_SD_INFO1_CARD_IN | USDHI6_SD_INFO1_CARD_OUT)
+
+#define USDHI6_SD_INFO2_ERR	(USDHI6_SD_INFO2_CMD_ERR |	\
+	USDHI6_SD_INFO2_CRC_ERR | USDHI6_SD_INFO2_END_ERR |	\
+	USDHI6_SD_INFO2_TOUT | USDHI6_SD_INFO2_IWA_ERR |	\
+	USDHI6_SD_INFO2_IRA_ERR | USDHI6_SD_INFO2_RSP_TOUT |	\
+	USDHI6_SD_INFO2_ILA)
+
+#define USDHI6_SD_INFO1_IRQ	(USDHI6_SD_INFO1_RSP_END | USDHI6_SD_INFO1_ACCESS_END | \
+				 USDHI6_SD_INFO1_CARD)
+
+#define USDHI6_SD_INFO2_IRQ	(USDHI6_SD_INFO2_ERR | USDHI6_SD_INFO2_BRE | \
+				 USDHI6_SD_INFO2_BWE | 0x0800 | USDHI6_SD_INFO2_ILA)
+
+#define USDHI6_SD_CLK_CTRL_SCLKEN	BIT(8)
+
+#define USDHI6_SD_STOP_STP		BIT(0)
+#define USDHI6_SD_STOP_SEC		BIT(8)
+
+#define USDHI6_SDIO_INFO1_IOIRQ		BIT(0)
+#define USDHI6_SDIO_INFO1_EXPUB52	BIT(14)
+#define USDHI6_SDIO_INFO1_EXWT		BIT(15)
+
+#define USDHI6_SD_ERR_STS1_CRC_NO_ERROR	BIT(13)
+
+#define USDHI6_SOFT_RST_RESERVED	(BIT(1) | BIT(2))
+#define USDHI6_SOFT_RST_RESET		BIT(0)
+
+#define USDHI6_SD_OPTION_TIMEOUT_SHIFT	4
+#define USDHI6_SD_OPTION_TIMEOUT_MASK	(0xf << USDHI6_SD_OPTION_TIMEOUT_SHIFT)
+#define USDHI6_SD_OPTION_WIDTH_1	BIT(15)
+
+#define USDHI6_SD_PORT_SEL_PORTS_SHIFT	8
+
+#define USDHI6_SD_CLK_CTRL_DIV_MASK	0xff
+
+#define USDHI6_SDIO_INFO1_IRQ	(USDHI6_SDIO_INFO1_IOIRQ | 3 | \
+				 USDHI6_SDIO_INFO1_EXPUB52 | USDHI6_SDIO_INFO1_EXWT)
+
+#define USDHI6_MIN_DMA 64
+
+enum usdhi6_wait_for {
+	USDHI6_WAIT_FOR_REQUEST,
+	USDHI6_WAIT_FOR_CMD,
+	USDHI6_WAIT_FOR_MREAD,
+	USDHI6_WAIT_FOR_MWRITE,
+	USDHI6_WAIT_FOR_READ,
+	USDHI6_WAIT_FOR_WRITE,
+	USDHI6_WAIT_FOR_DATA_END,
+	USDHI6_WAIT_FOR_STOP,
+	USDHI6_WAIT_FOR_DMA,
+};
+
+struct usdhi6_page {
+	struct page *page;
+	void *mapped;		/* mapped page */
+};
+
+struct usdhi6_host {
+	struct mmc_host *mmc;
+	struct mmc_request *mrq;
+	void __iomem *base;
+	struct clk *clk;
+
+	/* SG memory handling */
+
+	/* Common for multiple and single block requests */
+	struct usdhi6_page pg;	/* current page from an SG */
+	void *blk_page;		/* either a mapped page, or the bounce buffer */
+	size_t offset;		/* offset within a page, including sg->offset */
+
+	/* Blocks, crossing a page boundary */
+	size_t head_len;
+	struct usdhi6_page head_pg;
+
+	/* A bounce buffer for unaligned blocks or blocks, crossing a page boundary */
+	struct scatterlist bounce_sg;
+	u8 bounce_buf[512];
+
+	/* Multiple block requests only */
+	struct scatterlist *sg;	/* current SG segment */
+	int page_idx;		/* page index within an SG segment */
+
+	enum usdhi6_wait_for wait;
+	u32 status_mask;
+	u32 status2_mask;
+	u32 sdio_mask;
+	u32 io_error;
+	u32 irq_status;
+	unsigned long imclk;
+	unsigned long rate;
+	bool app_cmd;
+
+	/* Timeout handling */
+	struct delayed_work timeout_work;
+	unsigned long timeout;
+
+	/* DMA support */
+	struct dma_chan *chan_rx;
+	struct dma_chan *chan_tx;
+	bool dma_active;
+};
+
+/*			I/O primitives					*/
+
+static void usdhi6_write(struct usdhi6_host *host, u32 reg, u32 data)
+{
+	iowrite32(data, host->base + reg);
+	dev_vdbg(mmc_dev(host->mmc), "%s(0x%p + 0x%x) = 0x%x\n", __func__,
+		host->base, reg, data);
+}
+
+static void usdhi6_write16(struct usdhi6_host *host, u32 reg, u16 data)
+{
+	iowrite16(data, host->base + reg);
+	dev_vdbg(mmc_dev(host->mmc), "%s(0x%p + 0x%x) = 0x%x\n", __func__,
+		host->base, reg, data);
+}
+
+static u32 usdhi6_read(struct usdhi6_host *host, u32 reg)
+{
+	u32 data = ioread32(host->base + reg);
+	dev_vdbg(mmc_dev(host->mmc), "%s(0x%p + 0x%x) = 0x%x\n", __func__,
+		host->base, reg, data);
+	return data;
+}
+
+static u16 usdhi6_read16(struct usdhi6_host *host, u32 reg)
+{
+	u16 data = ioread16(host->base + reg);
+	dev_vdbg(mmc_dev(host->mmc), "%s(0x%p + 0x%x) = 0x%x\n", __func__,
+		host->base, reg, data);
+	return data;
+}
+
+static void usdhi6_irq_enable(struct usdhi6_host *host, u32 info1, u32 info2)
+{
+	host->status_mask = USDHI6_SD_INFO1_IRQ & ~info1;
+	host->status2_mask = USDHI6_SD_INFO2_IRQ & ~info2;
+	usdhi6_write(host, USDHI6_SD_INFO1_MASK, host->status_mask);
+	usdhi6_write(host, USDHI6_SD_INFO2_MASK, host->status2_mask);
+}
+
+static void usdhi6_wait_for_resp(struct usdhi6_host *host)
+{
+	usdhi6_irq_enable(host, USDHI6_SD_INFO1_RSP_END |
+			  USDHI6_SD_INFO1_ACCESS_END | USDHI6_SD_INFO1_CARD_CD,
+			  USDHI6_SD_INFO2_ERR);
+}
+
+static void usdhi6_wait_for_brwe(struct usdhi6_host *host, bool read)
+{
+	usdhi6_irq_enable(host, USDHI6_SD_INFO1_ACCESS_END |
+			  USDHI6_SD_INFO1_CARD_CD, USDHI6_SD_INFO2_ERR |
+			  (read ? USDHI6_SD_INFO2_BRE : USDHI6_SD_INFO2_BWE));
+}
+
+static void usdhi6_only_cd(struct usdhi6_host *host)
+{
+	/* Mask all except card hotplug */
+	usdhi6_irq_enable(host, USDHI6_SD_INFO1_CARD_CD, 0);
+}
+
+static void usdhi6_mask_all(struct usdhi6_host *host)
+{
+	usdhi6_irq_enable(host, 0, 0);
+}
+
+static int usdhi6_error_code(struct usdhi6_host *host)
+{
+	u32 err;
+
+	usdhi6_write(host, USDHI6_SD_STOP, USDHI6_SD_STOP_STP);
+
+	if (host->io_error &
+	    (USDHI6_SD_INFO2_RSP_TOUT | USDHI6_SD_INFO2_TOUT)) {
+		u32 rsp54 = usdhi6_read(host, USDHI6_SD_RSP54);
+		int opc = host->mrq ? host->mrq->cmd->opcode : -1;
+
+		err = usdhi6_read(host, USDHI6_SD_ERR_STS2);
+		/* Response timeout is often normal, don't spam the log */
+		if (host->wait == USDHI6_WAIT_FOR_CMD)
+			dev_dbg(mmc_dev(host->mmc),
+				"T-out sts 0x%x, resp 0x%x, state %u, CMD%d\n",
+				err, rsp54, host->wait, opc);
+		else
+			dev_warn(mmc_dev(host->mmc),
+				 "T-out sts 0x%x, resp 0x%x, state %u, CMD%d\n",
+				 err, rsp54, host->wait, opc);
+		return -ETIMEDOUT;
+	}
+
+	err = usdhi6_read(host, USDHI6_SD_ERR_STS1);
+	if (err != USDHI6_SD_ERR_STS1_CRC_NO_ERROR)
+		dev_warn(mmc_dev(host->mmc), "Err sts 0x%x, state %u, CMD%d\n",
+			 err, host->wait, host->mrq ? host->mrq->cmd->opcode : -1);
+	if (host->io_error & USDHI6_SD_INFO2_ILA)
+		return -EILSEQ;
+
+	return -EIO;
+}
+
+/*			Scatter-Gather management			*/
+
+/*
+ * In PIO mode we have to map each page separately, using kmap(). That way
+ * adjacent pages are mapped to non-adjacent virtual addresses. That's why we
+ * have to use a bounce buffer for blocks, crossing page boundaries. Such blocks
+ * have been observed with an SDIO WiFi card (b43 driver).
+ */
+static void usdhi6_blk_bounce(struct usdhi6_host *host,
+			      struct scatterlist *sg)
+{
+	struct mmc_data *data = host->mrq->data;
+	size_t blk_head = host->head_len;
+
+	dev_dbg(mmc_dev(host->mmc), "%s(): CMD%u of %u SG: %ux%u @ 0x%x\n",
+		__func__, host->mrq->cmd->opcode, data->sg_len,
+		data->blksz, data->blocks, sg->offset);
+
+	host->head_pg.page	= host->pg.page;
+	host->head_pg.mapped	= host->pg.mapped;
+	host->pg.page		= nth_page(host->pg.page, 1);
+	host->pg.mapped		= kmap(host->pg.page);
+
+	host->blk_page = host->bounce_buf;
+	host->offset = 0;
+
+	if (data->flags & MMC_DATA_READ)
+		return;
+
+	memcpy(host->bounce_buf, host->head_pg.mapped + PAGE_SIZE - blk_head,
+	       blk_head);
+	memcpy(host->bounce_buf + blk_head, host->pg.mapped,
+	       data->blksz - blk_head);
+}
+
+/* Only called for multiple block IO */
+static void usdhi6_sg_prep(struct usdhi6_host *host)
+{
+	struct mmc_request *mrq = host->mrq;
+	struct mmc_data *data = mrq->data;
+
+	usdhi6_write(host, USDHI6_SD_SECCNT, data->blocks);
+
+	host->sg = data->sg;
+	/* TODO: if we always map, this is redundant */
+	host->offset = host->sg->offset;
+}
+
+/* Map the first page in an SG segment: common for multiple and single block IO */
+static void *usdhi6_sg_map(struct usdhi6_host *host)
+{
+	struct mmc_data *data = host->mrq->data;
+	struct scatterlist *sg = data->sg_len > 1 ? host->sg : data->sg;
+	size_t head = PAGE_SIZE - sg->offset;
+	size_t blk_head = head % data->blksz;
+
+	WARN(host->pg.page, "%p not properly unmapped!\n", host->pg.page);
+	if (WARN(sg_dma_len(sg) % data->blksz,
+		 "SG size %zd isn't a multiple of block size %zd\n",
+		 sg_dma_len(sg), data->blksz))
+		return NULL;
+
+	host->pg.page = sg_page(sg);
+	host->pg.mapped = kmap(host->pg.page);
+	host->offset = sg->offset;
+
+	/*
+	 * Block size must be a power of 2 for multi-block transfers,
+	 * therefore blk_head is equal for all pages in this SG
+	 */
+	host->head_len = blk_head;
+
+	if (head < data->blksz)
+		/*
+		 * The first block in the SG crosses a page boundary.
+		 * Max blksz = 512, so blocks can only span 2 pages
+		 */
+		usdhi6_blk_bounce(host, sg);
+	else
+		host->blk_page = host->pg.mapped;
+
+	dev_dbg(mmc_dev(host->mmc), "Mapped %p (%lx) at %p + %u for CMD%u @ 0x%p\n",
+		host->pg.page, page_to_pfn(host->pg.page), host->pg.mapped,
+		sg->offset, host->mrq->cmd->opcode, host->mrq);
+
+	return host->blk_page + host->offset;
+}
+
+/* Unmap the current page: common for multiple and single block IO */
+static void usdhi6_sg_unmap(struct usdhi6_host *host, bool force)
+{
+	struct mmc_data *data = host->mrq->data;
+	struct page *page = host->head_pg.page;
+
+	if (page) {
+		/* Previous block was cross-page boundary */
+		struct scatterlist *sg = data->sg_len > 1 ?
+			host->sg : data->sg;
+		size_t blk_head = host->head_len;
+
+		if (!data->error && data->flags & MMC_DATA_READ) {
+			memcpy(host->head_pg.mapped + PAGE_SIZE - blk_head,
+			       host->bounce_buf, blk_head);
+			memcpy(host->pg.mapped, host->bounce_buf + blk_head,
+			       data->blksz - blk_head);
+		}
+
+		flush_dcache_page(page);
+		kunmap(page);
+
+		host->head_pg.page = NULL;
+
+		if (!force && sg_dma_len(sg) + sg->offset >
+		    (host->page_idx << PAGE_SHIFT) + data->blksz - blk_head)
+			/* More blocks in this SG, don't unmap the next page */
+			return;
+	}
+
+	page = host->pg.page;
+	if (!page)
+		return;
+
+	flush_dcache_page(page);
+	kunmap(page);
+
+	host->pg.page = NULL;
+}
+
+/* Called from MMC_WRITE_MULTIPLE_BLOCK or MMC_READ_MULTIPLE_BLOCK */
+static void usdhi6_sg_advance(struct usdhi6_host *host)
+{
+	struct mmc_data *data = host->mrq->data;
+	size_t done, total;
+
+	/* New offset: set at the end of the previous block */
+	if (host->head_pg.page) {
+		/* Finished a cross-page block, jump to the new page */
+		host->page_idx++;
+		host->offset = data->blksz - host->head_len;
+		host->blk_page = host->pg.mapped;
+		usdhi6_sg_unmap(host, false);
+	} else {
+		host->offset += data->blksz;
+		/* The completed block didn't cross a page boundary */
+		if (host->offset == PAGE_SIZE) {
+			/* If required, we'll map the page below */
+			host->offset = 0;
+			host->page_idx++;
+		}
+	}
+
+	/*
+	 * Now host->blk_page + host->offset point at the end of our last block
+	 * and host->page_idx is the index of the page, in which our new block
+	 * is located, if any
+	 */
+
+	done = (host->page_idx << PAGE_SHIFT) + host->offset;
+	total = host->sg->offset + sg_dma_len(host->sg);
+
+	dev_dbg(mmc_dev(host->mmc), "%s(): %zu of %zu @ %u\n", __func__,
+		done, total, host->offset);
+
+	if (done < total && host->offset) {
+		/* More blocks in this page */
+		if (host->offset + data->blksz > PAGE_SIZE)
+			/* We approached at a block, that spans 2 pages */
+			usdhi6_blk_bounce(host, host->sg);
+
+		return;
+	}
+
+	/* Finished current page or an SG segment */
+	usdhi6_sg_unmap(host, false);
+
+	if (done == total) {
+		/*
+		 * End of an SG segment or the complete SG: jump to the next
+		 * segment, we'll map it later in usdhi6_blk_read() or
+		 * usdhi6_blk_write()
+		 */
+		struct scatterlist *next = sg_next(host->sg);
+
+		host->page_idx = 0;
+
+		if (!next)
+			host->wait = USDHI6_WAIT_FOR_DATA_END;
+		host->sg = next;
+
+		if (WARN(next && sg_dma_len(next) % data->blksz,
+			 "SG size %zd isn't a multiple of block size %zd\n",
+			 sg_dma_len(next), data->blksz))
+			data->error = -EINVAL;
+
+		return;
+	}
+
+	/* We cannot get here after crossing a page border */
+
+	/* Next page in the same SG */
+	host->pg.page = nth_page(sg_page(host->sg), host->page_idx);
+	host->pg.mapped = kmap(host->pg.page);
+	host->blk_page = host->pg.mapped;
+
+	dev_dbg(mmc_dev(host->mmc), "Mapped %p (%lx) at %p for CMD%u @ 0x%p\n",
+		host->pg.page, page_to_pfn(host->pg.page), host->pg.mapped,
+		host->mrq->cmd->opcode, host->mrq);
+}
+
+/*			DMA handling					*/
+
+static void usdhi6_dma_release(struct usdhi6_host *host)
+{
+	host->dma_active = false;
+	if (host->chan_tx) {
+		struct dma_chan *chan = host->chan_tx;
+		host->chan_tx = NULL;
+		dma_release_channel(chan);
+	}
+	if (host->chan_rx) {
+		struct dma_chan *chan = host->chan_rx;
+		host->chan_rx = NULL;
+		dma_release_channel(chan);
+	}
+}
+
+static void usdhi6_dma_stop_unmap(struct usdhi6_host *host)
+{
+	struct mmc_data *data = host->mrq->data;
+
+	if (!host->dma_active)
+		return;
+
+	usdhi6_write(host, USDHI6_CC_EXT_MODE, 0);
+	host->dma_active = false;
+
+	if (data->flags & MMC_DATA_READ)
+		dma_unmap_sg(host->chan_rx->device->dev, data->sg,
+			     data->sg_len, DMA_FROM_DEVICE);
+	else
+		dma_unmap_sg(host->chan_tx->device->dev, data->sg,
+			     data->sg_len, DMA_TO_DEVICE);
+}
+
+static void usdhi6_dma_complete(void *arg)
+{
+	struct usdhi6_host *host = arg;
+	struct mmc_request *mrq = host->mrq;
+
+	if (WARN(!mrq || !mrq->data, "%s: NULL data in DMA completion for %p!\n",
+		 dev_name(mmc_dev(host->mmc)), mrq))
+		return;
+
+	dev_dbg(mmc_dev(host->mmc), "%s(): CMD%u DMA completed\n", __func__,
+		mrq->cmd->opcode);
+
+	usdhi6_dma_stop_unmap(host);
+	usdhi6_wait_for_brwe(host, mrq->data->flags & MMC_DATA_READ);
+}
+
+static int usdhi6_dma_setup(struct usdhi6_host *host, struct dma_chan *chan,
+			    enum dma_transfer_direction dir)
+{
+	struct mmc_data *data = host->mrq->data;
+	struct scatterlist *sg = data->sg;
+	struct dma_async_tx_descriptor *desc = NULL;
+	dma_cookie_t cookie = -EINVAL;
+	enum dma_data_direction data_dir;
+	int ret;
+
+	switch (dir) {
+	case DMA_MEM_TO_DEV:
+		data_dir = DMA_TO_DEVICE;
+		break;
+	case DMA_DEV_TO_MEM:
+		data_dir = DMA_FROM_DEVICE;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = dma_map_sg(chan->device->dev, sg, data->sg_len, data_dir);
+	if (ret > 0) {
+		host->dma_active = true;
+		desc = dmaengine_prep_slave_sg(chan, sg, ret, dir,
+					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	}
+
+	if (desc) {
+		desc->callback = usdhi6_dma_complete;
+		desc->callback_param = host;
+		cookie = dmaengine_submit(desc);
+	}
+
+	dev_dbg(mmc_dev(host->mmc), "%s(): mapped %d -> %d, cookie %d @ %p\n",
+		__func__, data->sg_len, ret, cookie, desc);
+
+	if (cookie < 0) {
+		/* DMA failed, fall back to PIO */
+		if (ret >= 0)
+			ret = cookie;
+		usdhi6_dma_release(host);
+		dev_warn(mmc_dev(host->mmc),
+			 "DMA failed: %d, falling back to PIO\n", ret);
+	}
+
+	return cookie;
+}
+
+static int usdhi6_dma_start(struct usdhi6_host *host)
+{
+	if (!host->chan_rx || !host->chan_tx)
+		return -ENODEV;
+
+	if (host->mrq->data->flags & MMC_DATA_READ)
+		return usdhi6_dma_setup(host, host->chan_rx, DMA_DEV_TO_MEM);
+
+	return usdhi6_dma_setup(host, host->chan_tx, DMA_MEM_TO_DEV);
+}
+
+static void usdhi6_dma_kill(struct usdhi6_host *host)
+{
+	struct mmc_data *data = host->mrq->data;
+
+	dev_dbg(mmc_dev(host->mmc), "%s(): SG of %u: %ux%u\n",
+		__func__, data->sg_len, data->blocks, data->blksz);
+	/* Abort DMA */
+	if (data->flags & MMC_DATA_READ)
+		dmaengine_terminate_all(host->chan_rx);
+	else
+		dmaengine_terminate_all(host->chan_tx);
+}
+
+static void usdhi6_dma_check_error(struct usdhi6_host *host)
+{
+	struct mmc_data *data = host->mrq->data;
+
+	dev_dbg(mmc_dev(host->mmc), "%s(): IO error %d, status 0x%x\n",
+		__func__, host->io_error, usdhi6_read(host, USDHI6_SD_INFO1));
+
+	if (host->io_error) {
+		data->error = usdhi6_error_code(host);
+		data->bytes_xfered = 0;
+		usdhi6_dma_kill(host);
+		usdhi6_dma_release(host);
+		dev_warn(mmc_dev(host->mmc),
+			 "DMA failed: %d, falling back to PIO\n", data->error);
+		return;
+	}
+
+	/*
+	 * The datasheet tells us to check a response from the card, whereas
+	 * responses only come after the command phase, not after the data
+	 * phase. Let's check anyway.
+	 */
+	if (host->irq_status & USDHI6_SD_INFO1_RSP_END)
+		dev_warn(mmc_dev(host->mmc), "Unexpected response received!\n");
+}
+
+static void usdhi6_dma_kick(struct usdhi6_host *host)
+{
+	if (host->mrq->data->flags & MMC_DATA_READ)
+		dma_async_issue_pending(host->chan_rx);
+	else
+		dma_async_issue_pending(host->chan_tx);
+}
+
+static void usdhi6_dma_request(struct usdhi6_host *host, phys_addr_t start)
+{
+	struct dma_slave_config cfg = {
+		.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
+		.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
+	};
+	int ret;
+
+	host->chan_tx = dma_request_slave_channel(mmc_dev(host->mmc), "tx");
+	dev_dbg(mmc_dev(host->mmc), "%s: TX: got channel %p\n", __func__,
+		host->chan_tx);
+
+	if (!host->chan_tx)
+		return;
+
+	cfg.direction = DMA_MEM_TO_DEV;
+	cfg.dst_addr = start + USDHI6_SD_BUF0;
+	cfg.dst_maxburst = 128;	/* 128 words * 4 bytes = 512 bytes */
+	cfg.src_addr = 0;
+	ret = dmaengine_slave_config(host->chan_tx, &cfg);
+	if (ret < 0)
+		goto e_release_tx;
+
+	host->chan_rx = dma_request_slave_channel(mmc_dev(host->mmc), "rx");
+	dev_dbg(mmc_dev(host->mmc), "%s: RX: got channel %p\n", __func__,
+		host->chan_rx);
+
+	if (!host->chan_rx)
+		goto e_release_tx;
+
+	cfg.direction = DMA_DEV_TO_MEM;
+	cfg.src_addr = cfg.dst_addr;
+	cfg.src_maxburst = 128;	/* 128 words * 4 bytes = 512 bytes */
+	cfg.dst_addr = 0;
+	ret = dmaengine_slave_config(host->chan_rx, &cfg);
+	if (ret < 0)
+		goto e_release_rx;
+
+	return;
+
+e_release_rx:
+	dma_release_channel(host->chan_rx);
+	host->chan_rx = NULL;
+e_release_tx:
+	dma_release_channel(host->chan_tx);
+	host->chan_tx = NULL;
+}
+
+/*			API helpers					*/
+
+static void usdhi6_clk_set(struct usdhi6_host *host, struct mmc_ios *ios)
+{
+	unsigned long rate = ios->clock;
+	u32 val;
+	unsigned int i;
+
+	for (i = 1000; i; i--) {
+		if (usdhi6_read(host, USDHI6_SD_INFO2) & USDHI6_SD_INFO2_SCLKDIVEN)
+			break;
+		usleep_range(10, 100);
+	}
+
+	if (!i) {
+		dev_err(mmc_dev(host->mmc), "SD bus busy, clock set aborted\n");
+		return;
+	}
+
+	val = usdhi6_read(host, USDHI6_SD_CLK_CTRL) & ~USDHI6_SD_CLK_CTRL_DIV_MASK;
+
+	if (rate) {
+		unsigned long new_rate;
+
+		if (host->imclk <= rate) {
+			if (ios->timing != MMC_TIMING_UHS_DDR50) {
+				/* Cannot have 1-to-1 clock in DDR mode */
+				new_rate = host->imclk;
+				val |= 0xff;
+			} else {
+				new_rate = host->imclk / 2;
+			}
+		} else {
+			unsigned long div =
+				roundup_pow_of_two(DIV_ROUND_UP(host->imclk, rate));
+			val |= div >> 2;
+			new_rate = host->imclk / div;
+		}
+
+		if (host->rate == new_rate)
+			return;
+
+		host->rate = new_rate;
+
+		dev_dbg(mmc_dev(host->mmc), "target %lu, div %u, set %lu\n",
+			rate, (val & 0xff) << 2, new_rate);
+	}
+
+	/*
+	 * if old or new rate is equal to input rate, have to switch the clock
+	 * off before changing and on after
+	 */
+	if (host->imclk == rate || host->imclk == host->rate || !rate)
+		usdhi6_write(host, USDHI6_SD_CLK_CTRL,
+			     val & ~USDHI6_SD_CLK_CTRL_SCLKEN);
+
+	if (!rate) {
+		host->rate = 0;
+		return;
+	}
+
+	usdhi6_write(host, USDHI6_SD_CLK_CTRL, val);
+
+	if (host->imclk == rate || host->imclk == host->rate ||
+	    !(val & USDHI6_SD_CLK_CTRL_SCLKEN))
+		usdhi6_write(host, USDHI6_SD_CLK_CTRL,
+			     val | USDHI6_SD_CLK_CTRL_SCLKEN);
+}
+
+static void usdhi6_set_power(struct usdhi6_host *host, struct mmc_ios *ios)
+{
+	struct mmc_host *mmc = host->mmc;
+
+	if (!IS_ERR(mmc->supply.vmmc))
+		/* Errors ignored... */
+		mmc_regulator_set_ocr(mmc, mmc->supply.vmmc,
+				      ios->power_mode ? ios->vdd : 0);
+}
+
+static int usdhi6_reset(struct usdhi6_host *host)
+{
+	int i;
+
+	usdhi6_write(host, USDHI6_SOFT_RST, USDHI6_SOFT_RST_RESERVED);
+	cpu_relax();
+	usdhi6_write(host, USDHI6_SOFT_RST, USDHI6_SOFT_RST_RESERVED | USDHI6_SOFT_RST_RESET);
+	for (i = 1000; i; i--)
+		if (usdhi6_read(host, USDHI6_SOFT_RST) & USDHI6_SOFT_RST_RESET)
+			break;
+
+	return i ? 0 : -ETIMEDOUT;
+}
+
+static void usdhi6_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct usdhi6_host *host = mmc_priv(mmc);
+	u32 option, mode;
+	int ret;
+
+	dev_dbg(mmc_dev(mmc), "%uHz, OCR: %u, power %u, bus-width %u, timing %u\n",
+		ios->clock, ios->vdd, ios->power_mode, ios->bus_width, ios->timing);
+
+	switch (ios->power_mode) {
+	case MMC_POWER_OFF:
+		usdhi6_set_power(host, ios);
+		usdhi6_only_cd(host);
+		break;
+	case MMC_POWER_UP:
+		/*
+		 * We only also touch USDHI6_SD_OPTION from .request(), which
+		 * cannot race with MMC_POWER_UP
+		 */
+		ret = usdhi6_reset(host);
+		if (ret < 0) {
+			dev_err(mmc_dev(mmc), "Cannot reset the interface!\n");
+		} else {
+			usdhi6_set_power(host, ios);
+			usdhi6_only_cd(host);
+		}
+		break;
+	case MMC_POWER_ON:
+		option = usdhi6_read(host, USDHI6_SD_OPTION);
+		/*
+		 * The eMMC standard only allows 4 or 8 bits in the DDR mode,
+		 * the same probably holds for SD cards. We check here anyway,
+		 * since the datasheet explicitly requires 4 bits for DDR.
+		 */
+		if (ios->bus_width == MMC_BUS_WIDTH_1) {
+			if (ios->timing == MMC_TIMING_UHS_DDR50)
+				dev_err(mmc_dev(mmc),
+					"4 bits are required for DDR\n");
+			option |= USDHI6_SD_OPTION_WIDTH_1;
+			mode = 0;
+		} else {
+			option &= ~USDHI6_SD_OPTION_WIDTH_1;
+			mode = ios->timing == MMC_TIMING_UHS_DDR50;
+		}
+		usdhi6_write(host, USDHI6_SD_OPTION, option);
+		usdhi6_write(host, USDHI6_SDIF_MODE, mode);
+		break;
+	}
+
+	if (host->rate != ios->clock)
+		usdhi6_clk_set(host, ios);
+}
+
+/* This is data timeout. Response timeout is fixed to 640 clock cycles */
+static void usdhi6_timeout_set(struct usdhi6_host *host)
+{
+	struct mmc_request *mrq = host->mrq;
+	u32 val;
+	unsigned long ticks;
+
+	if (!mrq->data)
+		ticks = host->rate / 1000 * mrq->cmd->busy_timeout;
+	else
+		ticks = host->rate / 1000000 * (mrq->data->timeout_ns / 1000) +
+			mrq->data->timeout_clks;
+
+	if (!ticks || ticks > 1 << 27)
+		/* Max timeout */
+		val = 14;
+	else if (ticks < 1 << 13)
+		/* Min timeout */
+		val = 0;
+	else
+		val = order_base_2(ticks) - 13;
+
+	dev_dbg(mmc_dev(host->mmc), "Set %s timeout %lu ticks @ %lu Hz\n",
+		mrq->data ? "data" : "cmd", ticks, host->rate);
+
+	/* Timeout Counter mask: 0xf0 */
+	usdhi6_write(host, USDHI6_SD_OPTION, (val << USDHI6_SD_OPTION_TIMEOUT_SHIFT) |
+		     (usdhi6_read(host, USDHI6_SD_OPTION) & ~USDHI6_SD_OPTION_TIMEOUT_MASK));
+}
+
+static void usdhi6_request_done(struct usdhi6_host *host)
+{
+	struct mmc_request *mrq = host->mrq;
+	struct mmc_data *data = mrq->data;
+
+	if (WARN(host->pg.page || host->head_pg.page,
+		 "Page %p or %p not unmapped: wait %u, CMD%d(%c) @ +0x%x %ux%u in SG%u!\n",
+		 host->pg.page, host->head_pg.page, host->wait, mrq->cmd->opcode,
+		 data ? (data->flags & MMC_DATA_READ ? 'R' : 'W') : '-',
+		 data ? host->offset : 0, data ? data->blocks : 0,
+		 data ? data->blksz : 0, data ? data->sg_len : 0))
+		usdhi6_sg_unmap(host, true);
+
+	if (mrq->cmd->error ||
+	    (data && data->error) ||
+	    (mrq->stop && mrq->stop->error))
+		dev_dbg(mmc_dev(host->mmc), "%s(CMD%d: %ux%u): err %d %d %d\n",
+			__func__, mrq->cmd->opcode, data ? data->blocks : 0,
+			data ? data->blksz : 0,
+			mrq->cmd->error,
+			data ? data->error : 1,
+			mrq->stop ? mrq->stop->error : 1);
+
+	/* Disable DMA */
+	usdhi6_write(host, USDHI6_CC_EXT_MODE, 0);
+	host->wait = USDHI6_WAIT_FOR_REQUEST;
+	host->mrq = NULL;
+
+	mmc_request_done(host->mmc, mrq);
+}
+
+static int usdhi6_cmd_flags(struct usdhi6_host *host)
+{
+	struct mmc_request *mrq = host->mrq;
+	struct mmc_command *cmd = mrq->cmd;
+	u16 opc = cmd->opcode;
+
+	if (host->app_cmd) {
+		host->app_cmd = false;
+		opc |= USDHI6_SD_CMD_APP;
+	}
+
+	if (mrq->data) {
+		opc |= USDHI6_SD_CMD_DATA;
+
+		if (mrq->data->flags & MMC_DATA_READ)
+			opc |= USDHI6_SD_CMD_READ;
+
+		if (cmd->opcode == MMC_READ_MULTIPLE_BLOCK ||
+		    cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK ||
+		    (cmd->opcode == SD_IO_RW_EXTENDED &&
+		     mrq->data->blocks > 1)) {
+			opc |= USDHI6_SD_CMD_MULTI;
+			if (!mrq->stop)
+				opc |= USDHI6_SD_CMD_CMD12_AUTO_OFF;
+		}
+
+		switch (mmc_resp_type(cmd)) {
+		case MMC_RSP_NONE:
+			opc |= USDHI6_SD_CMD_MODE_RSP_NONE;
+			break;
+		case MMC_RSP_R1:
+			opc |= USDHI6_SD_CMD_MODE_RSP_R1;
+			break;
+		case MMC_RSP_R1B:
+			opc |= USDHI6_SD_CMD_MODE_RSP_R1B;
+			break;
+		case MMC_RSP_R2:
+			opc |= USDHI6_SD_CMD_MODE_RSP_R2;
+			break;
+		case MMC_RSP_R3:
+			opc |= USDHI6_SD_CMD_MODE_RSP_R3;
+			break;
+		default:
+			dev_warn(mmc_dev(host->mmc),
+				 "Unknown response type %d\n",
+				 mmc_resp_type(cmd));
+			return -EINVAL;
+		}
+	}
+
+	return opc;
+}
+
+static int usdhi6_rq_start(struct usdhi6_host *host)
+{
+	struct mmc_request *mrq = host->mrq;
+	struct mmc_command *cmd = mrq->cmd;
+	struct mmc_data *data = mrq->data;
+	int opc = usdhi6_cmd_flags(host);
+	int i;
+
+	if (opc < 0)
+		return opc;
+
+	for (i = 1000; i; i--) {
+		if (!(usdhi6_read(host, USDHI6_SD_INFO2) & USDHI6_SD_INFO2_CBSY))
+			break;
+		usleep_range(10, 100);
+	}
+
+	if (!i) {
+		dev_dbg(mmc_dev(host->mmc), "Command active, request aborted\n");
+		return -EAGAIN;
+	}
+
+	if (data) {
+		bool use_dma;
+		int ret = 0;
+
+		host->page_idx = 0;
+
+		if (cmd->opcode == SD_IO_RW_EXTENDED && data->blocks > 1) {
+			switch (data->blksz) {
+			case 512:
+				break;
+			case 32:
+			case 64:
+			case 128:
+			case 256:
+				if (mrq->stop)
+					ret = -EINVAL;
+				break;
+			default:
+				ret = -EINVAL;
+			}
+		} else if ((cmd->opcode == MMC_READ_MULTIPLE_BLOCK ||
+			    cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK) &&
+			   data->blksz != 512) {
+			ret = -EINVAL;
+		}
+
+		if (ret < 0) {
+			dev_warn(mmc_dev(host->mmc), "%s(): %u blocks of %u bytes\n",
+				 __func__, data->blocks, data->blksz);
+			return -EINVAL;
+		}
+
+		if (cmd->opcode == MMC_READ_MULTIPLE_BLOCK ||
+		    cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK ||
+		    (cmd->opcode == SD_IO_RW_EXTENDED &&
+		     data->blocks > 1))
+			usdhi6_sg_prep(host);
+
+		usdhi6_write(host, USDHI6_SD_SIZE, data->blksz);
+
+		if ((data->blksz >= USDHI6_MIN_DMA ||
+		     data->blocks > 1) &&
+		    (data->blksz % 4 ||
+		     data->sg->offset % 4))
+			dev_dbg(mmc_dev(host->mmc),
+				"Bad SG of %u: %ux%u @ %u\n", data->sg_len,
+				data->blksz, data->blocks, data->sg->offset);
+
+		/* Enable DMA for USDHI6_MIN_DMA bytes or more */
+		use_dma = data->blksz >= USDHI6_MIN_DMA &&
+			!(data->blksz % 4) &&
+			usdhi6_dma_start(host) >= DMA_MIN_COOKIE;
+
+		if (use_dma)
+			usdhi6_write(host, USDHI6_CC_EXT_MODE, USDHI6_CC_EXT_MODE_SDRW);
+
+		dev_dbg(mmc_dev(host->mmc),
+			"%s(): request opcode %u, %u blocks of %u bytes in %u segments, %s %s @+0x%x%s\n",
+			__func__, cmd->opcode, data->blocks, data->blksz,
+			data->sg_len, use_dma ? "DMA" : "PIO",
+			data->flags & MMC_DATA_READ ? "read" : "write",
+			data->sg->offset, mrq->stop ? " + stop" : "");
+	} else {
+		dev_dbg(mmc_dev(host->mmc), "%s(): request opcode %u\n",
+			__func__, cmd->opcode);
+	}
+
+	/* We have to get a command completion interrupt with DMA too */
+	usdhi6_wait_for_resp(host);
+
+	host->wait = USDHI6_WAIT_FOR_CMD;
+	schedule_delayed_work(&host->timeout_work, host->timeout);
+
+	/* SEC bit is required to enable block counting by the core */
+	usdhi6_write(host, USDHI6_SD_STOP,
+		     data && data->blocks > 1 ? USDHI6_SD_STOP_SEC : 0);
+	usdhi6_write(host, USDHI6_SD_ARG, cmd->arg);
+
+	/* Kick command execution */
+	usdhi6_write(host, USDHI6_SD_CMD, opc);
+
+	return 0;
+}
+
+static void usdhi6_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	struct usdhi6_host *host = mmc_priv(mmc);
+	int ret;
+
+	cancel_delayed_work_sync(&host->timeout_work);
+
+	host->mrq = mrq;
+	host->sg = NULL;
+
+	usdhi6_timeout_set(host);
+	ret = usdhi6_rq_start(host);
+	if (ret < 0) {
+		mrq->cmd->error = ret;
+		usdhi6_request_done(host);
+	}
+}
+
+static int usdhi6_get_cd(struct mmc_host *mmc)
+{
+	struct usdhi6_host *host = mmc_priv(mmc);
+	/* Read is atomic, no need to lock */
+	u32 status = usdhi6_read(host, USDHI6_SD_INFO1) & USDHI6_SD_INFO1_CD;
+
+/*
+ *	level	status.CD	CD_ACTIVE_HIGH	card present
+ *	1	0		0		0
+ *	1	0		1		1
+ *	0	1		0		1
+ *	0	1		1		0
+ */
+	return !status ^ !(mmc->caps2 & MMC_CAP2_CD_ACTIVE_HIGH);
+}
+
+static int usdhi6_get_ro(struct mmc_host *mmc)
+{
+	struct usdhi6_host *host = mmc_priv(mmc);
+	/* No locking as above */
+	u32 status = usdhi6_read(host, USDHI6_SD_INFO1) & USDHI6_SD_INFO1_WP;
+
+/*
+ *	level	status.WP	RO_ACTIVE_HIGH	card read-only
+ *	1	0		0		0
+ *	1	0		1		1
+ *	0	1		0		1
+ *	0	1		1		0
+ */
+	return !status ^ !(mmc->caps2 & MMC_CAP2_RO_ACTIVE_HIGH);
+}
+
+static void usdhi6_enable_sdio_irq(struct mmc_host *mmc, int enable)
+{
+	struct usdhi6_host *host = mmc_priv(mmc);
+
+	dev_dbg(mmc_dev(mmc), "%s(): %sable\n", __func__, enable ? "en" : "dis");
+
+	if (enable) {
+		host->sdio_mask = USDHI6_SDIO_INFO1_IRQ & ~USDHI6_SDIO_INFO1_IOIRQ;
+		usdhi6_write(host, USDHI6_SDIO_INFO1_MASK, host->sdio_mask);
+		usdhi6_write(host, USDHI6_SDIO_MODE, 1);
+	} else {
+		usdhi6_write(host, USDHI6_SDIO_MODE, 0);
+		usdhi6_write(host, USDHI6_SDIO_INFO1_MASK, USDHI6_SDIO_INFO1_IRQ);
+		host->sdio_mask = USDHI6_SDIO_INFO1_IRQ;
+	}
+}
+
+static struct mmc_host_ops usdhi6_ops = {
+	.request	= usdhi6_request,
+	.set_ios	= usdhi6_set_ios,
+	.get_cd		= usdhi6_get_cd,
+	.get_ro		= usdhi6_get_ro,
+	.enable_sdio_irq = usdhi6_enable_sdio_irq,
+};
+
+/*			State machine handlers				*/
+
+static void usdhi6_resp_cmd12(struct usdhi6_host *host)
+{
+	struct mmc_command *cmd = host->mrq->stop;
+	cmd->resp[0] = usdhi6_read(host, USDHI6_SD_RSP10);
+}
+
+static void usdhi6_resp_read(struct usdhi6_host *host)
+{
+	struct mmc_command *cmd = host->mrq->cmd;
+	u32 *rsp = cmd->resp, tmp = 0;
+	int i;
+
+/*
+ * RSP10	39-8
+ * RSP32	71-40
+ * RSP54	103-72
+ * RSP76	127-104
+ * R2-type response:
+ * resp[0]	= r[127..96]
+ * resp[1]	= r[95..64]
+ * resp[2]	= r[63..32]
+ * resp[3]	= r[31..0]
+ * Other responses:
+ * resp[0]	= r[39..8]
+ */
+
+	if (mmc_resp_type(cmd) == MMC_RSP_NONE)
+		return;
+
+	if (!(host->irq_status & USDHI6_SD_INFO1_RSP_END)) {
+		dev_err(mmc_dev(host->mmc),
+			"CMD%d: response expected but is missing!\n", cmd->opcode);
+		return;
+	}
+
+	if (mmc_resp_type(cmd) & MMC_RSP_136)
+		for (i = 0; i < 4; i++) {
+			if (i)
+				rsp[3 - i] = tmp >> 24;
+			tmp = usdhi6_read(host, USDHI6_SD_RSP10 + i * 8);
+			rsp[3 - i] |= tmp << 8;
+		}
+	else if (cmd->opcode == MMC_READ_MULTIPLE_BLOCK ||
+		 cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK)
+		/* Read RSP54 to avoid conflict with auto CMD12 */
+		rsp[0] = usdhi6_read(host, USDHI6_SD_RSP54);
+	else
+		rsp[0] = usdhi6_read(host, USDHI6_SD_RSP10);
+
+	dev_dbg(mmc_dev(host->mmc), "Response 0x%x\n", rsp[0]);
+}
+
+static int usdhi6_blk_read(struct usdhi6_host *host)
+{
+	struct mmc_data *data = host->mrq->data;
+	u32 *p;
+	int i, rest;
+
+	if (host->io_error) {
+		data->error = usdhi6_error_code(host);
+		goto error;
+	}
+
+	if (host->pg.page) {
+		p = host->blk_page + host->offset;
+	} else {
+		p = usdhi6_sg_map(host);
+		if (!p) {
+			data->error = -ENOMEM;
+			goto error;
+		}
+	}
+
+	for (i = 0; i < data->blksz / 4; i++, p++)
+		*p = usdhi6_read(host, USDHI6_SD_BUF0);
+
+	rest = data->blksz % 4;
+	for (i = 0; i < (rest + 1) / 2; i++) {
+		u16 d = usdhi6_read16(host, USDHI6_SD_BUF0);
+		((u8 *)p)[2 * i] = ((u8 *)&d)[0];
+		if (rest > 1 && !i)
+			((u8 *)p)[2 * i + 1] = ((u8 *)&d)[1];
+	}
+
+	return 0;
+
+error:
+	dev_dbg(mmc_dev(host->mmc), "%s(): %d\n", __func__, data->error);
+	host->wait = USDHI6_WAIT_FOR_REQUEST;
+	return data->error;
+}
+
+static int usdhi6_blk_write(struct usdhi6_host *host)
+{
+	struct mmc_data *data = host->mrq->data;
+	u32 *p;
+	int i, rest;
+
+	if (host->io_error) {
+		data->error = usdhi6_error_code(host);
+		goto error;
+	}
+
+	if (host->pg.page) {
+		p = host->blk_page + host->offset;
+	} else {
+		p = usdhi6_sg_map(host);
+		if (!p) {
+			data->error = -ENOMEM;
+			goto error;
+		}
+	}
+
+	for (i = 0; i < data->blksz / 4; i++, p++)
+		usdhi6_write(host, USDHI6_SD_BUF0, *p);
+
+	rest = data->blksz % 4;
+	for (i = 0; i < (rest + 1) / 2; i++) {
+		u16 d;
+		((u8 *)&d)[0] = ((u8 *)p)[2 * i];
+		if (rest > 1 && !i)
+			((u8 *)&d)[1] = ((u8 *)p)[2 * i + 1];
+		else
+			((u8 *)&d)[1] = 0;
+		usdhi6_write16(host, USDHI6_SD_BUF0, d);
+	}
+
+	return 0;
+
+error:
+	dev_dbg(mmc_dev(host->mmc), "%s(): %d\n", __func__, data->error);
+	host->wait = USDHI6_WAIT_FOR_REQUEST;
+	return data->error;
+}
+
+static int usdhi6_stop_cmd(struct usdhi6_host *host)
+{
+	struct mmc_request *mrq = host->mrq;
+
+	switch (mrq->cmd->opcode) {
+	case MMC_READ_MULTIPLE_BLOCK:
+	case MMC_WRITE_MULTIPLE_BLOCK:
+		if (mrq->stop->opcode == MMC_STOP_TRANSMISSION) {
+			host->wait = USDHI6_WAIT_FOR_STOP;
+			return 0;
+		}
+		/* Unsupported STOP command */
+	default:
+		dev_err(mmc_dev(host->mmc),
+			"unsupported stop CMD%d for CMD%d\n",
+			mrq->stop->opcode, mrq->cmd->opcode);
+		mrq->stop->error = -EOPNOTSUPP;
+	}
+
+	return -EOPNOTSUPP;
+}
+
+static bool usdhi6_end_cmd(struct usdhi6_host *host)
+{
+	struct mmc_request *mrq = host->mrq;
+	struct mmc_command *cmd = mrq->cmd;
+
+	if (host->io_error) {
+		cmd->error = usdhi6_error_code(host);
+		return false;
+	}
+
+	usdhi6_resp_read(host);
+
+	if (!mrq->data)
+		return false;
+
+	if (host->dma_active) {
+		usdhi6_dma_kick(host);
+		if (!mrq->stop)
+			host->wait = USDHI6_WAIT_FOR_DMA;
+		else if (usdhi6_stop_cmd(host) < 0)
+			return false;
+	} else if (mrq->data->flags & MMC_DATA_READ) {
+		if (cmd->opcode == MMC_READ_MULTIPLE_BLOCK ||
+		    (cmd->opcode == SD_IO_RW_EXTENDED &&
+		     mrq->data->blocks > 1))
+			host->wait = USDHI6_WAIT_FOR_MREAD;
+		else
+			host->wait = USDHI6_WAIT_FOR_READ;
+	} else {
+		if (cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK ||
+		    (cmd->opcode == SD_IO_RW_EXTENDED &&
+		     mrq->data->blocks > 1))
+			host->wait = USDHI6_WAIT_FOR_MWRITE;
+		else
+			host->wait = USDHI6_WAIT_FOR_WRITE;
+	}
+
+	return true;
+}
+
+static bool usdhi6_read_block(struct usdhi6_host *host)
+{
+	/* ACCESS_END IRQ is already unmasked */
+	int ret = usdhi6_blk_read(host);
+
+	/*
+	 * Have to force unmapping both pages: the single block could have been
+	 * cross-page, in which case for single-block IO host->page_idx == 0.
+	 * So, if we don't force, the second page won't be unmapped.
+	 */
+	usdhi6_sg_unmap(host, true);
+
+	if (ret < 0)
+		return false;
+
+	host->wait = USDHI6_WAIT_FOR_DATA_END;
+	return true;
+}
+
+static bool usdhi6_mread_block(struct usdhi6_host *host)
+{
+	int ret = usdhi6_blk_read(host);
+
+	if (ret < 0)
+		return false;
+
+	usdhi6_sg_advance(host);
+
+	return !host->mrq->data->error &&
+		(host->wait != USDHI6_WAIT_FOR_DATA_END || !host->mrq->stop);
+}
+
+static bool usdhi6_write_block(struct usdhi6_host *host)
+{
+	int ret = usdhi6_blk_write(host);
+
+	/* See comment in usdhi6_read_block() */
+	usdhi6_sg_unmap(host, true);
+
+	if (ret < 0)
+		return false;
+
+	host->wait = USDHI6_WAIT_FOR_DATA_END;
+	return true;
+}
+
+static bool usdhi6_mwrite_block(struct usdhi6_host *host)
+{
+	int ret = usdhi6_blk_write(host);
+
+	if (ret < 0)
+		return false;
+
+	usdhi6_sg_advance(host);
+
+	return !host->mrq->data->error &&
+		(host->wait != USDHI6_WAIT_FOR_DATA_END || !host->mrq->stop);
+}
+
+/*			Interrupt & timeout handlers			*/
+
+static irqreturn_t usdhi6_sd_bh(int irq, void *dev_id)
+{
+	struct usdhi6_host *host = dev_id;
+	struct mmc_request *mrq;
+	struct mmc_command *cmd;
+	struct mmc_data *data;
+	bool io_wait = false;
+
+	cancel_delayed_work_sync(&host->timeout_work);
+
+	mrq = host->mrq;
+	if (!mrq)
+		return IRQ_HANDLED;
+
+	cmd = mrq->cmd;
+	data = mrq->data;
+
+	switch (host->wait) {
+	case USDHI6_WAIT_FOR_REQUEST:
+		/* We're too late, the timeout has already kicked in */
+		return IRQ_HANDLED;
+	case USDHI6_WAIT_FOR_CMD:
+		/* Wait for data? */
+		io_wait = usdhi6_end_cmd(host);
+		break;
+	case USDHI6_WAIT_FOR_MREAD:
+		/* Wait for more data? */
+		io_wait = usdhi6_mread_block(host);
+		break;
+	case USDHI6_WAIT_FOR_READ:
+		/* Wait for data end? */
+		io_wait = usdhi6_read_block(host);
+		break;
+	case USDHI6_WAIT_FOR_MWRITE:
+		/* Wait data to write? */
+		io_wait = usdhi6_mwrite_block(host);
+		break;
+	case USDHI6_WAIT_FOR_WRITE:
+		/* Wait for data end? */
+		io_wait = usdhi6_write_block(host);
+		break;
+	case USDHI6_WAIT_FOR_DMA:
+		usdhi6_dma_check_error(host);
+		break;
+	case USDHI6_WAIT_FOR_STOP:
+		usdhi6_write(host, USDHI6_SD_STOP, 0);
+		if (host->io_error) {
+			int ret = usdhi6_error_code(host);
+			if (mrq->stop)
+				mrq->stop->error = ret;
+			else
+				mrq->data->error = ret;
+			dev_warn(mmc_dev(host->mmc), "%s(): %d\n", __func__, ret);
+			break;
+		}
+		usdhi6_resp_cmd12(host);
+		mrq->stop->error = 0;
+		break;
+	case USDHI6_WAIT_FOR_DATA_END:
+		if (host->io_error) {
+			mrq->data->error = usdhi6_error_code(host);
+			dev_warn(mmc_dev(host->mmc), "%s(): %d\n", __func__,
+				 mrq->data->error);
+		}
+		break;
+	default:
+		cmd->error = -EFAULT;
+		dev_err(mmc_dev(host->mmc), "Invalid state %u\n", host->wait);
+		usdhi6_request_done(host);
+		return IRQ_HANDLED;
+	}
+
+	if (io_wait) {
+		schedule_delayed_work(&host->timeout_work, host->timeout);
+		/* Wait for more data or ACCESS_END */
+		if (!host->dma_active)
+			usdhi6_wait_for_brwe(host, mrq->data->flags & MMC_DATA_READ);
+		return IRQ_HANDLED;
+	}
+
+	if (!cmd->error) {
+		if (data) {
+			if (!data->error) {
+				if (host->wait != USDHI6_WAIT_FOR_STOP &&
+				    host->mrq->stop &&
+				    !host->mrq->stop->error &&
+				    !usdhi6_stop_cmd(host)) {
+					/* Sending STOP */
+					usdhi6_wait_for_resp(host);
+
+					schedule_delayed_work(&host->timeout_work,
+							      host->timeout);
+
+					return IRQ_HANDLED;
+				}
+
+				data->bytes_xfered = data->blocks * data->blksz;
+			} else {
+				/* Data error: might need to unmap the last page */
+				dev_warn(mmc_dev(host->mmc), "%s(): data error %d\n",
+					 __func__, data->error);
+				usdhi6_sg_unmap(host, true);
+			}
+		} else if (cmd->opcode == MMC_APP_CMD) {
+			host->app_cmd = true;
+		}
+	}
+
+	usdhi6_request_done(host);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t usdhi6_sd(int irq, void *dev_id)
+{
+	struct usdhi6_host *host = dev_id;
+	u16 status, status2, error;
+
+	status = usdhi6_read(host, USDHI6_SD_INFO1) & ~host->status_mask &
+		~USDHI6_SD_INFO1_CARD;
+	status2 = usdhi6_read(host, USDHI6_SD_INFO2) & ~host->status2_mask;
+
+	usdhi6_only_cd(host);
+
+	dev_dbg(mmc_dev(host->mmc),
+		"IRQ status = 0x%08x, status2 = 0x%08x\n", status, status2);
+
+	if (!status && !status2)
+		return IRQ_NONE;
+
+	error = status2 & USDHI6_SD_INFO2_ERR;
+
+	/* Ack / clear interrupts */
+	if (USDHI6_SD_INFO1_IRQ & status)
+		usdhi6_write(host, USDHI6_SD_INFO1,
+			     0xffff & ~(USDHI6_SD_INFO1_IRQ & status));
+
+	if (USDHI6_SD_INFO2_IRQ & status2) {
+		if (error)
+			/* In error cases BWE and BRE aren't cleared automatically */
+			status2 |= USDHI6_SD_INFO2_BWE | USDHI6_SD_INFO2_BRE;
+
+		usdhi6_write(host, USDHI6_SD_INFO2,
+			     0xffff & ~(USDHI6_SD_INFO2_IRQ & status2));
+	}
+
+	host->io_error = error;
+	host->irq_status = status;
+
+	if (error) {
+		/* Don't pollute the log with unsupported command timeouts */
+		if (host->wait != USDHI6_WAIT_FOR_CMD ||
+		    error != USDHI6_SD_INFO2_RSP_TOUT)
+			dev_warn(mmc_dev(host->mmc),
+				 "%s(): INFO2 error bits 0x%08x\n",
+				 __func__, error);
+		else
+			dev_dbg(mmc_dev(host->mmc),
+				"%s(): INFO2 error bits 0x%08x\n",
+				__func__, error);
+	}
+
+	return IRQ_WAKE_THREAD;
+}
+
+static irqreturn_t usdhi6_sdio(int irq, void *dev_id)
+{
+	struct usdhi6_host *host = dev_id;
+	u32 status = usdhi6_read(host, USDHI6_SDIO_INFO1) & ~host->sdio_mask;
+
+	dev_dbg(mmc_dev(host->mmc), "%s(): status 0x%x\n", __func__, status);
+
+	if (!status)
+		return IRQ_NONE;
+
+	usdhi6_write(host, USDHI6_SDIO_INFO1, ~status);
+
+	mmc_signal_sdio_irq(host->mmc);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t usdhi6_cd(int irq, void *dev_id)
+{
+	struct usdhi6_host *host = dev_id;
+	struct mmc_host *mmc = host->mmc;
+	u16 status;
+
+	/* We're only interested in hotplug events here */
+	status = usdhi6_read(host, USDHI6_SD_INFO1) & ~host->status_mask &
+		USDHI6_SD_INFO1_CARD;
+
+	if (!status)
+		return IRQ_NONE;
+
+	/* Ack */
+	usdhi6_write(host, USDHI6_SD_INFO1, !status);
+
+	if (!work_pending(&mmc->detect.work) &&
+	    (((status & USDHI6_SD_INFO1_CARD_INSERT) &&
+	      !mmc->card) ||
+	     ((status & USDHI6_SD_INFO1_CARD_EJECT) &&
+	      mmc->card)))
+		mmc_detect_change(mmc, msecs_to_jiffies(100));
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Actually this should not be needed, if the built-in timeout works reliably in
+ * the both PIO cases and DMA never fails. But if DMA does fail, a timeout
+ * handler might be the only way to catch the error.
+ */
+static void usdhi6_timeout_work(struct work_struct *work)
+{
+	struct delayed_work *d = container_of(work, struct delayed_work, work);
+	struct usdhi6_host *host = container_of(d, struct usdhi6_host, timeout_work);
+	struct mmc_request *mrq = host->mrq;
+	struct mmc_data *data = mrq ? mrq->data : NULL;
+
+	dev_warn(mmc_dev(host->mmc),
+		 "%s timeout wait %u CMD%d: IRQ 0x%08x:0x%08x, last IRQ 0x%08x\n",
+		 host->dma_active ? "DMA" : "PIO",
+		 host->wait, mrq ? mrq->cmd->opcode : -1,
+		 usdhi6_read(host, USDHI6_SD_INFO1),
+		 usdhi6_read(host, USDHI6_SD_INFO2), host->irq_status);
+
+	if (host->dma_active) {
+		usdhi6_dma_kill(host);
+		usdhi6_dma_stop_unmap(host);
+	}
+
+	switch (host->wait) {
+	default:
+		dev_err(mmc_dev(host->mmc), "Invalid state %u\n", host->wait);
+		/* mrq can be NULL in this actually impossible case */
+	case USDHI6_WAIT_FOR_CMD:
+		usdhi6_error_code(host);
+		if (mrq)
+			mrq->cmd->error = -ETIMEDOUT;
+		break;
+	case USDHI6_WAIT_FOR_STOP:
+		usdhi6_error_code(host);
+		mrq->stop->error = -ETIMEDOUT;
+		break;
+	case USDHI6_WAIT_FOR_DMA:
+	case USDHI6_WAIT_FOR_MREAD:
+	case USDHI6_WAIT_FOR_MWRITE:
+	case USDHI6_WAIT_FOR_READ:
+	case USDHI6_WAIT_FOR_WRITE:
+		dev_dbg(mmc_dev(host->mmc),
+			"%c: page #%u @ +0x%x %ux%u in SG%u. Current SG %u bytes @ %u\n",
+			data->flags & MMC_DATA_READ ? 'R' : 'W', host->page_idx,
+			host->offset, data->blocks, data->blksz, data->sg_len,
+			sg_dma_len(host->sg), host->sg->offset);
+		usdhi6_sg_unmap(host, true);
+		/*
+		 * If USDHI6_WAIT_FOR_DATA_END times out, we have already unmapped
+		 * the page
+		 */
+	case USDHI6_WAIT_FOR_DATA_END:
+		usdhi6_error_code(host);
+		data->error = -ETIMEDOUT;
+	}
+
+	if (mrq)
+		usdhi6_request_done(host);
+}
+
+/*			 Probe / release				*/
+
+static const struct of_device_id usdhi6_of_match[] = {
+	{.compatible = "renesas,usdhi6rol0"},
+	{}
+};
+MODULE_DEVICE_TABLE(of, usdhi6_of_match);
+
+static int usdhi6_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct mmc_host *mmc;
+	struct usdhi6_host *host;
+	struct resource *res;
+	int irq_cd, irq_sd, irq_sdio;
+	u32 version;
+	int ret;
+
+	if (!dev->of_node)
+		return -ENODEV;
+
+	irq_cd = platform_get_irq_byname(pdev, "card detect");
+	irq_sd = platform_get_irq_byname(pdev, "data");
+	irq_sdio = platform_get_irq_byname(pdev, "SDIO");
+	if (irq_sd < 0 || irq_sdio < 0)
+		return -ENODEV;
+
+	mmc = mmc_alloc_host(sizeof(struct usdhi6_host), dev);
+	if (!mmc)
+		return -ENOMEM;
+
+	ret = mmc_of_parse(mmc);
+	if (ret < 0)
+		goto e_free_mmc;
+
+	mmc_regulator_get_supply(mmc);
+
+	host		= mmc_priv(mmc);
+	host->mmc	= mmc;
+	host->wait	= USDHI6_WAIT_FOR_REQUEST;
+	host->timeout	= msecs_to_jiffies(4000);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	host->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(host->base)) {
+		ret = PTR_ERR(host->base);
+		goto e_free_mmc;
+	}
+
+	host->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(host->clk))
+		goto e_free_mmc;
+
+	host->imclk = clk_get_rate(host->clk);
+
+	ret = clk_prepare_enable(host->clk);
+	if (ret < 0)
+		goto e_free_mmc;
+
+	version = usdhi6_read(host, USDHI6_VERSION);
+	if ((version & 0xfff) != 0xa0d) {
+		dev_err(dev, "Version not recognized %x\n", version);
+		goto e_clk_off;
+	}
+
+	dev_info(dev, "A USDHI6ROL0 SD host detected with %d ports\n",
+		 usdhi6_read(host, USDHI6_SD_PORT_SEL) >> USDHI6_SD_PORT_SEL_PORTS_SHIFT);
+
+	usdhi6_mask_all(host);
+
+	if (irq_cd >= 0) {
+		ret = devm_request_irq(dev, irq_cd, usdhi6_cd, 0,
+				       dev_name(dev), host);
+		if (ret < 0)
+			goto e_clk_off;
+	} else {
+		mmc->caps |= MMC_CAP_NEEDS_POLL;
+	}
+
+	ret = devm_request_threaded_irq(dev, irq_sd, usdhi6_sd, usdhi6_sd_bh, 0,
+			       dev_name(dev), host);
+	if (ret < 0)
+		goto e_clk_off;
+
+	ret = devm_request_irq(dev, irq_sdio, usdhi6_sdio, 0,
+			       dev_name(dev), host);
+	if (ret < 0)
+		goto e_clk_off;
+
+	INIT_DELAYED_WORK(&host->timeout_work, usdhi6_timeout_work);
+
+	usdhi6_dma_request(host, res->start);
+
+	mmc->ops = &usdhi6_ops;
+	mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED |
+		MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_DDR50 | MMC_CAP_SDIO_IRQ;
+	/* Set .max_segs to some random number. Feel free to adjust. */
+	mmc->max_segs = 32;
+	mmc->max_blk_size = 512;
+	mmc->max_req_size = PAGE_CACHE_SIZE * mmc->max_segs;
+	mmc->max_blk_count = mmc->max_req_size / mmc->max_blk_size;
+	/*
+	 * Setting .max_seg_size to 1 page would simplify our page-mapping code,
+	 * But OTOH, having large segments makes DMA more efficient. We could
+	 * check, whether we managed to get DMA and fall back to 1 page
+	 * segments, but if we do manage to obtain DMA and then it fails at
+	 * run-time and we fall back to PIO, we will continue getting large
+	 * segments. So, we wouldn't be able to get rid of the code anyway.
+	 */
+	mmc->max_seg_size = mmc->max_req_size;
+	if (!mmc->f_max)
+		mmc->f_max = host->imclk;
+	mmc->f_min = host->imclk / 512;
+
+	platform_set_drvdata(pdev, host);
+
+	ret = mmc_add_host(mmc);
+	if (ret < 0)
+		goto e_clk_off;
+
+	return 0;
+
+e_clk_off:
+	clk_disable_unprepare(host->clk);
+e_free_mmc:
+	mmc_free_host(mmc);
+
+	return ret;
+}
+
+static int usdhi6_remove(struct platform_device *pdev)
+{
+	struct usdhi6_host *host = platform_get_drvdata(pdev);
+
+	mmc_remove_host(host->mmc);
+
+	usdhi6_mask_all(host);
+	cancel_delayed_work_sync(&host->timeout_work);
+	usdhi6_dma_release(host);
+	clk_disable_unprepare(host->clk);
+	mmc_free_host(host->mmc);
+
+	return 0;
+}
+
+static struct platform_driver usdhi6_driver = {
+	.probe		= usdhi6_probe,
+	.remove		= usdhi6_remove,
+	.driver		= {
+		.name	= "usdhi6rol0",
+		.owner	= THIS_MODULE,
+		.of_match_table = usdhi6_of_match,
+	},
+};
+
+module_platform_driver(usdhi6_driver);
+
+MODULE_DESCRIPTION("Renesas usdhi6rol0 SD/SDIO host driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:usdhi6rol0");
+MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>");

drivers/mmc/host/wmt-sdmmc.c

@@ -840,7 +840,7 @@ static int wmt_mci_probe(struct platform_device *pdev)
 	priv->dma_desc_buffer = dma_alloc_coherent(&pdev->dev,
 						   mmc->max_blk_count * 16,
 						   &priv->dma_desc_device_addr,
-						   208);
+						   GFP_KERNEL);
 	if (!priv->dma_desc_buffer) {
 		dev_err(&pdev->dev, "DMA alloc fail\n");
 		ret = -EPERM;

drivers/net/wireless/rsi/rsi_91x_sdio.c

@@ -285,7 +285,6 @@ static void rsi_reset_card(struct sdio_func *pfunction)
 		if (err) {
 			rsi_dbg(ERR_ZONE, "%s: CCCR speed reg read failed: %d\n",
 				__func__, err);
-			card->state &= ~MMC_STATE_HIGHSPEED;
 		} else {
 			err = rsi_cmd52writebyte(card,
 						 SDIO_CCCR_SPEED,
@@ -296,14 +295,13 @@ static void rsi_reset_card(struct sdio_func *pfunction)
 					__func__, err);
 				return;
 			}
-			mmc_card_set_highspeed(card);
 			host->ios.timing = MMC_TIMING_SD_HS;
 			host->ops->set_ios(host, &host->ios);
 		}
 	}
 
 	/* Set clock */
-	if (mmc_card_highspeed(card))
+	if (mmc_card_hs(card))
 		clock = 50000000;
 	else
 		clock = card->cis.max_dtr;

include/linux/mmc/card.h

@@ -63,12 +63,12 @@ struct mmc_ext_csd {
 	unsigned int            power_off_longtime;     /* Units: ms */
 	u8			power_off_notification;	/* state */
 	unsigned int		hs_max_dtr;
+	unsigned int		hs200_max_dtr;
 #define MMC_HIGH_26_MAX_DTR	26000000
 #define MMC_HIGH_52_MAX_DTR	52000000
 #define MMC_HIGH_DDR_MAX_DTR	52000000
 #define MMC_HS200_MAX_DTR	200000000
 	unsigned int		sectors;
-	unsigned int		card_type;
 	unsigned int		hc_erase_size;		/* In sectors */
 	unsigned int		hc_erase_timeout;	/* In milliseconds */
 	unsigned int		sec_trim_mult;	/* Secure trim multiplier  */
@@ -110,6 +110,7 @@ struct mmc_ext_csd {
 	u8			raw_pwr_cl_200_360;	/* 237 */
 	u8			raw_pwr_cl_ddr_52_195;	/* 238 */
 	u8			raw_pwr_cl_ddr_52_360;	/* 239 */
+	u8			raw_pwr_cl_ddr_200_360;	/* 253 */
 	u8			raw_bkops_status;	/* 246 */
 	u8			raw_sectors[4];		/* 212 - 4 bytes */
 
@@ -194,6 +195,7 @@ struct sdio_cis {
 };
 
 struct mmc_host;
+struct mmc_ios;
 struct sdio_func;
 struct sdio_func_tuple;
 
@@ -250,15 +252,11 @@ struct mmc_card {
 	unsigned int		state;		/* (our) card state */
 #define MMC_STATE_PRESENT	(1<<0)		/* present in sysfs */
 #define MMC_STATE_READONLY	(1<<1)		/* card is read-only */
-#define MMC_STATE_HIGHSPEED	(1<<2)		/* card is in high speed mode */
-#define MMC_STATE_BLOCKADDR	(1<<3)		/* card uses block-addressing */
-#define MMC_STATE_HIGHSPEED_DDR (1<<4)		/* card is in high speed mode */
-#define MMC_STATE_ULTRAHIGHSPEED (1<<5)		/* card is in ultra high speed mode */
-#define MMC_CARD_SDXC		(1<<6)		/* card is SDXC */
-#define MMC_CARD_REMOVED	(1<<7)		/* card has been removed */
-#define MMC_STATE_HIGHSPEED_200	(1<<8)		/* card is in HS200 mode */
-#define MMC_STATE_DOING_BKOPS	(1<<10)		/* card is doing BKOPS */
-#define MMC_STATE_SUSPENDED	(1<<11)		/* card is suspended */
+#define MMC_STATE_BLOCKADDR	(1<<2)		/* card uses block-addressing */
+#define MMC_CARD_SDXC		(1<<3)		/* card is SDXC */
+#define MMC_CARD_REMOVED	(1<<4)		/* card has been removed */
+#define MMC_STATE_DOING_BKOPS	(1<<5)		/* card is doing BKOPS */
+#define MMC_STATE_SUSPENDED	(1<<6)		/* card is suspended */
 	unsigned int		quirks; 	/* card quirks */
 #define MMC_QUIRK_LENIENT_FN0	(1<<0)		/* allow SDIO FN0 writes outside of the VS CCCR range */
 #define MMC_QUIRK_BLKSZ_FOR_BYTE_MODE (1<<1)	/* use func->cur_blksize */
@@ -301,6 +299,7 @@ struct mmc_card {
 	struct sdio_func_tuple	*tuples;	/* unknown common tuples */
 
 	unsigned int		sd_bus_speed;	/* Bus Speed Mode set for the card */
+	unsigned int		mmc_avail_type;	/* supported device type by both host and card */
 
 	struct dentry		*debugfs_root;
 	struct mmc_part	part[MMC_NUM_PHY_PARTITION]; /* physical partitions */
@@ -353,7 +352,7 @@ struct mmc_fixup {
 #define CID_OEMID_ANY ((unsigned short) -1)
 #define CID_NAME_ANY (NULL)
 
-#define END_FIXUP { 0 }
+#define END_FIXUP { NULL }
 
 #define _FIXUP_EXT(_name, _manfid, _oemid, _rev_start, _rev_end,	\
 		   _cis_vendor, _cis_device,				\
@@ -418,11 +417,7 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data)
 
 #define mmc_card_present(c)	((c)->state & MMC_STATE_PRESENT)
 #define mmc_card_readonly(c)	((c)->state & MMC_STATE_READONLY)
-#define mmc_card_highspeed(c)	((c)->state & MMC_STATE_HIGHSPEED)
-#define mmc_card_hs200(c)	((c)->state & MMC_STATE_HIGHSPEED_200)
 #define mmc_card_blockaddr(c)	((c)->state & MMC_STATE_BLOCKADDR)
-#define mmc_card_ddr_mode(c)	((c)->state & MMC_STATE_HIGHSPEED_DDR)
-#define mmc_card_uhs(c)		((c)->state & MMC_STATE_ULTRAHIGHSPEED)
 #define mmc_card_ext_capacity(c) ((c)->state & MMC_CARD_SDXC)
 #define mmc_card_removed(c)	((c) && ((c)->state & MMC_CARD_REMOVED))
 #define mmc_card_doing_bkops(c)	((c)->state & MMC_STATE_DOING_BKOPS)
@@ -430,11 +425,7 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data)
 
 #define mmc_card_set_present(c)	((c)->state |= MMC_STATE_PRESENT)
 #define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY)
-#define mmc_card_set_highspeed(c) ((c)->state |= MMC_STATE_HIGHSPEED)
-#define mmc_card_set_hs200(c)	((c)->state |= MMC_STATE_HIGHSPEED_200)
 #define mmc_card_set_blockaddr(c) ((c)->state |= MMC_STATE_BLOCKADDR)
-#define mmc_card_set_ddr_mode(c) ((c)->state |= MMC_STATE_HIGHSPEED_DDR)
-#define mmc_card_set_uhs(c) ((c)->state |= MMC_STATE_ULTRAHIGHSPEED)
 #define mmc_card_set_ext_capacity(c) ((c)->state |= MMC_CARD_SDXC)
 #define mmc_card_set_removed(c) ((c)->state |= MMC_CARD_REMOVED)
 #define mmc_card_set_doing_bkops(c)	((c)->state |= MMC_STATE_DOING_BKOPS)

include/linux/mmc/dw_mmc.h

@@ -248,20 +248,6 @@ struct dw_mci_board {
 	/* delay in mS before detecting cards after interrupt */
 	u32 detect_delay_ms;
 
-	int (*init)(u32 slot_id, irq_handler_t , void *);
-	int (*get_ro)(u32 slot_id);
-	int (*get_cd)(u32 slot_id);
-	int (*get_ocr)(u32 slot_id);
-	int (*get_bus_wd)(u32 slot_id);
-	/*
-	 * Enable power to selected slot and set voltage to desired level.
-	 * Voltage levels are specified using MMC_VDD_xxx defines defined
-	 * in linux/mmc/host.h file.
-	 */
-	void (*setpower)(u32 slot_id, u32 volt);
-	void (*exit)(u32 slot_id);
-	void (*select_slot)(u32 slot_id);
-
 	struct dw_mci_dma_ops *dma_ops;
 	struct dma_pdata *data;
 	struct block_settings *blk_settings;

include/linux/mmc/host.h

@@ -17,6 +17,7 @@
 #include <linux/fault-inject.h>
 
 #include <linux/mmc/core.h>
+#include <linux/mmc/card.h>
 #include <linux/mmc/pm.h>
 
 struct mmc_ios {
@@ -58,13 +59,9 @@ struct mmc_ios {
 #define MMC_TIMING_UHS_SDR50	5
 #define MMC_TIMING_UHS_SDR104	6
 #define MMC_TIMING_UHS_DDR50	7
-#define MMC_TIMING_MMC_HS200	8
-
-#define MMC_SDR_MODE		0
-#define MMC_1_2V_DDR_MODE	1
-#define MMC_1_8V_DDR_MODE	2
-#define MMC_1_2V_SDR_MODE	3
-#define MMC_1_8V_SDR_MODE	4
+#define MMC_TIMING_MMC_DDR52	8
+#define MMC_TIMING_MMC_HS200	9
+#define MMC_TIMING_MMC_HS400	10
 
 	unsigned char	signal_voltage;		/* signalling voltage (1.8V or 3.3V) */
 
@@ -136,6 +133,9 @@ struct mmc_host_ops {
 
 	/* The tuning command opcode value is different for SD and eMMC cards */
 	int	(*execute_tuning)(struct mmc_host *host, u32 opcode);
+
+	/* Prepare HS400 target operating frequency depending host driver */
+	int	(*prepare_hs400_tuning)(struct mmc_host *host, struct mmc_ios *ios);
 	int	(*select_drive_strength)(unsigned int max_dtr, int host_drv, int card_drv);
 	void	(*hw_reset)(struct mmc_host *host);
 	void	(*card_event)(struct mmc_host *host);
@@ -278,6 +278,11 @@ struct mmc_host {
 #define MMC_CAP2_PACKED_CMD	(MMC_CAP2_PACKED_RD | \
 				 MMC_CAP2_PACKED_WR)
 #define MMC_CAP2_NO_PRESCAN_POWERUP (1 << 14)	/* Don't power up before scan */
+#define MMC_CAP2_HS400_1_8V	(1 << 15)	/* Can support HS400 1.8V */
+#define MMC_CAP2_HS400_1_2V	(1 << 16)	/* Can support HS400 1.2V */
+#define MMC_CAP2_HS400		(MMC_CAP2_HS400_1_8V | \
+				 MMC_CAP2_HS400_1_2V)
+#define MMC_CAP2_SDIO_IRQ_NOTHREAD (1 << 17)
 
 	mmc_pm_flag_t		pm_caps;	/* supported pm features */
 
@@ -318,6 +323,8 @@ struct mmc_host {
 	int			rescan_disable;	/* disable card detection */
 	int			rescan_entered;	/* used with nonremovable devices */
 
+	bool			trigger_card_event; /* card_event necessary */
+
 	struct mmc_card		*card;		/* device attached to this host */
 
 	wait_queue_head_t	wq;
@@ -391,12 +398,13 @@ static inline void mmc_signal_sdio_irq(struct mmc_host *host)
 	wake_up_process(host->sdio_irq_thread);
 }
 
+void sdio_run_irqs(struct mmc_host *host);
+
 #ifdef CONFIG_REGULATOR
 int mmc_regulator_get_ocrmask(struct regulator *supply);
 int mmc_regulator_set_ocr(struct mmc_host *mmc,
 			struct regulator *supply,
 			unsigned short vdd_bit);
-int mmc_regulator_get_supply(struct mmc_host *mmc);
 #else
 static inline int mmc_regulator_get_ocrmask(struct regulator *supply)
 {
@@ -409,13 +417,10 @@ static inline int mmc_regulator_set_ocr(struct mmc_host *mmc,
 {
 	return 0;
 }
-
-static inline int mmc_regulator_get_supply(struct mmc_host *mmc)
-{
-	return 0;
-}
 #endif
 
+int mmc_regulator_get_supply(struct mmc_host *mmc);
+
 int mmc_pm_notify(struct notifier_block *notify_block, unsigned long, void *);
 
 static inline int mmc_card_is_removable(struct mmc_host *host)
@@ -475,4 +480,32 @@ static inline unsigned int mmc_host_clk_rate(struct mmc_host *host)
 	return host->ios.clock;
 }
 #endif
+
+static inline int mmc_card_hs(struct mmc_card *card)
+{
+	return card->host->ios.timing == MMC_TIMING_SD_HS ||
+		card->host->ios.timing == MMC_TIMING_MMC_HS;
+}
+
+static inline int mmc_card_uhs(struct mmc_card *card)
+{
+	return card->host->ios.timing >= MMC_TIMING_UHS_SDR12 &&
+		card->host->ios.timing <= MMC_TIMING_UHS_DDR50;
+}
+
+static inline bool mmc_card_hs200(struct mmc_card *card)
+{
+	return card->host->ios.timing == MMC_TIMING_MMC_HS200;
+}
+
+static inline bool mmc_card_ddr52(struct mmc_card *card)
+{
+	return card->host->ios.timing == MMC_TIMING_MMC_DDR52;
+}
+
+static inline bool mmc_card_hs400(struct mmc_card *card)
+{
+	return card->host->ios.timing == MMC_TIMING_MMC_HS400;
+}
+
 #endif /* LINUX_MMC_HOST_H */

include/linux/mmc/mmc.h

@@ -325,6 +325,7 @@ struct _mmc_csd {
 #define EXT_CSD_POWER_OFF_LONG_TIME	247	/* RO */
 #define EXT_CSD_GENERIC_CMD6_TIME	248	/* RO */
 #define EXT_CSD_CACHE_SIZE		249	/* RO, 4 bytes */
+#define EXT_CSD_PWR_CL_DDR_200_360	253	/* RO */
 #define EXT_CSD_TAG_UNIT_SIZE		498	/* RO */
 #define EXT_CSD_DATA_TAG_SUPPORT	499	/* RO */
 #define EXT_CSD_MAX_PACKED_WRITES	500	/* RO */
@@ -354,18 +355,25 @@ struct _mmc_csd {
 #define EXT_CSD_CMD_SET_SECURE		(1<<1)
 #define EXT_CSD_CMD_SET_CPSECURE	(1<<2)
 
-#define EXT_CSD_CARD_TYPE_26	(1<<0)	/* Card can run at 26MHz */
-#define EXT_CSD_CARD_TYPE_52	(1<<1)	/* Card can run at 52MHz */
-#define EXT_CSD_CARD_TYPE_MASK	0x3F	/* Mask out reserved bits */
+#define EXT_CSD_CARD_TYPE_HS_26	(1<<0)	/* Card can run at 26MHz */
+#define EXT_CSD_CARD_TYPE_HS_52	(1<<1)	/* Card can run at 52MHz */
+#define EXT_CSD_CARD_TYPE_HS	(EXT_CSD_CARD_TYPE_HS_26 | \
+				 EXT_CSD_CARD_TYPE_HS_52)
 #define EXT_CSD_CARD_TYPE_DDR_1_8V  (1<<2)   /* Card can run at 52MHz */
 					     /* DDR mode @1.8V or 3V I/O */
 #define EXT_CSD_CARD_TYPE_DDR_1_2V  (1<<3)   /* Card can run at 52MHz */
 					     /* DDR mode @1.2V I/O */
 #define EXT_CSD_CARD_TYPE_DDR_52       (EXT_CSD_CARD_TYPE_DDR_1_8V  \
 					| EXT_CSD_CARD_TYPE_DDR_1_2V)
-#define EXT_CSD_CARD_TYPE_SDR_1_8V	(1<<4)	/* Card can run at 200MHz */
-#define EXT_CSD_CARD_TYPE_SDR_1_2V	(1<<5)	/* Card can run at 200MHz */
+#define EXT_CSD_CARD_TYPE_HS200_1_8V	(1<<4)	/* Card can run at 200MHz */
+#define EXT_CSD_CARD_TYPE_HS200_1_2V	(1<<5)	/* Card can run at 200MHz */
 						/* SDR mode @1.2V I/O */
+#define EXT_CSD_CARD_TYPE_HS200		(EXT_CSD_CARD_TYPE_HS200_1_8V | \
+					 EXT_CSD_CARD_TYPE_HS200_1_2V)
+#define EXT_CSD_CARD_TYPE_HS400_1_8V	(1<<6)	/* Card can run at 200MHz DDR, 1.8V */
+#define EXT_CSD_CARD_TYPE_HS400_1_2V	(1<<7)	/* Card can run at 200MHz DDR, 1.2V */
+#define EXT_CSD_CARD_TYPE_HS400		(EXT_CSD_CARD_TYPE_HS400_1_8V | \
+					 EXT_CSD_CARD_TYPE_HS400_1_2V)
 
 #define EXT_CSD_BUS_WIDTH_1	0	/* Card is in 1 bit mode */
 #define EXT_CSD_BUS_WIDTH_4	1	/* Card is in 4 bit mode */
@@ -373,6 +381,11 @@ struct _mmc_csd {
 #define EXT_CSD_DDR_BUS_WIDTH_4	5	/* Card is in 4 bit DDR mode */
 #define EXT_CSD_DDR_BUS_WIDTH_8	6	/* Card is in 8 bit DDR mode */
 
+#define EXT_CSD_TIMING_BC	0	/* Backwards compatility */
+#define EXT_CSD_TIMING_HS	1	/* High speed */
+#define EXT_CSD_TIMING_HS200	2	/* HS200 */
+#define EXT_CSD_TIMING_HS400	3	/* HS400 */
+
 #define EXT_CSD_SEC_ER_EN	BIT(0)
 #define EXT_CSD_SEC_BD_BLK_EN	BIT(2)
 #define EXT_CSD_SEC_GB_CL_EN	BIT(4)

include/linux/mmc/sdhci.h

@@ -57,12 +57,8 @@ struct sdhci_host {
 #define SDHCI_QUIRK_BROKEN_CARD_DETECTION		(1<<15)
 /* Controller reports inverted write-protect state */
 #define SDHCI_QUIRK_INVERTED_WRITE_PROTECT		(1<<16)
-/* Controller has nonstandard clock management */
-#define SDHCI_QUIRK_NONSTANDARD_CLOCK			(1<<17)
 /* Controller does not like fast PIO transfers */
 #define SDHCI_QUIRK_PIO_NEEDS_DELAY			(1<<18)
-/* Controller losing signal/interrupt enable states after reset */
-#define SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET		(1<<19)
 /* Controller has to be forced to use block size of 2048 bytes */
 #define SDHCI_QUIRK_FORCE_BLK_SZ_2048			(1<<20)
 /* Controller cannot do multi-block transfers */
@@ -147,6 +143,7 @@ struct sdhci_host {
 
 	bool runtime_suspended;	/* Host is runtime suspended */
 	bool bus_on;		/* Bus power prevents runtime suspend */
+	bool preset_enabled;	/* Preset is enabled */
 
 	struct mmc_request *mrq;	/* Current request */
 	struct mmc_command *cmd;	/* Current command */
@@ -164,8 +161,7 @@ struct sdhci_host {
 	dma_addr_t adma_addr;	/* Mapped ADMA descr. table */
 	dma_addr_t align_addr;	/* Mapped bounce buffer */
 
-	struct tasklet_struct card_tasklet;	/* Tasklet structures */
-	struct tasklet_struct finish_tasklet;
+	struct tasklet_struct finish_tasklet;	/* Tasklet structures */
 
 	struct timer_list timer;	/* Timer for timeouts */
 
@@ -177,6 +173,13 @@ struct sdhci_host {
 	unsigned int            ocr_avail_mmc;
 	u32 ocr_mask;		/* available voltages */
 
+	unsigned		timing;		/* Current timing */
+
+	u32			thread_isr;
+
+	/* cached registers */
+	u32			ier;
+
 	wait_queue_head_t	buf_ready_int;	/* Waitqueue for Buffer Read Ready interrupt */
 	unsigned int		tuning_done;	/* Condition flag set when CMD19 succeeds */
 

include/linux/omap-dma.h

@@ -1,23 +1,6 @@
-/*
- * OMAP DMA Engine support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
 #ifndef __LINUX_OMAP_DMA_H
 #define __LINUX_OMAP_DMA_H
-
-struct dma_chan;
-
-#if defined(CONFIG_DMA_OMAP) || (defined(CONFIG_DMA_OMAP_MODULE) && defined(MODULE))
-bool omap_dma_filter_fn(struct dma_chan *, void *);
-#else
-static inline bool omap_dma_filter_fn(struct dma_chan *c, void *d)
-{
-	return false;
-}
-#endif
+#include <linux/omap-dmaengine.h>
 
 /*
  *  Legacy OMAP DMA handling defines and functions

include/linux/omap-dmaengine.h

@@ -0,0 +1,21 @@
+/*
+ * OMAP DMA Engine support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __LINUX_OMAP_DMAENGINE_H
+#define __LINUX_OMAP_DMAENGINE_H
+
+struct dma_chan;
+
+#if defined(CONFIG_DMA_OMAP) || (defined(CONFIG_DMA_OMAP_MODULE) && defined(MODULE))
+bool omap_dma_filter_fn(struct dma_chan *, void *);
+#else
+static inline bool omap_dma_filter_fn(struct dma_chan *c, void *d)
+{
+	return false;
+}
+#endif
+#endif /* __LINUX_OMAP_DMAENGINE_H */