[media] rc: change wakeup_protocols to list all protocol variants

For IR wakeup, a driver has to program the hardware to wakeup at a
specific IR sequence, so it makes no sense to allow multiple wakeup
protocols to be selected. In the same manner the sysfs interface only
allows one scancode to be provided.

In addition, we need to know the specific variant of the protocol.

In short, these changes are made to the wakeup_protocols sysfs entry:
 - list all the protocol variants rather than the protocol groups,
   e.g. "nec nec-x nec-32" rather than just "nec".
 - only allow one protocol variant to be selected rather than multiple
 - wakeup_filter can only be set once a protocol has been selected in
   wakeup_protocols.

This is an API change, however the only user of this API is the img-ir,
but the wakeup code was never merged to mainline, so it was never used.

Signed-off-by: Sean Young <sean@mess.org>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Sifan Naeem <sifan.naeem@imgtec.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Documentation/ABI/testing/sysfs-class-rc

@@ -62,18 +62,18 @@ Description:
 		This value may be reset to 0 if the current protocol is altered.
 
 What:		/sys/class/rc/rcN/wakeup_protocols
-Date:		Feb 2014
-KernelVersion:	3.15
+Date:		Feb 2017
+KernelVersion:	4.11
 Contact:	Mauro Carvalho Chehab <m.chehab@samsung.com>
 Description:
 		Reading this file returns a list of available protocols to use
 		for the wakeup filter, something like:
-		    "rc5 rc6 nec jvc [sony]"
+		    "rc-5 nec nec-x rc-6-0 rc-6-6a-24 [rc-6-6a-32] rc-6-mce"
+		Note that protocol variants are listed, so "nec", "sony",
+		"rc-5", "rc-6" have their different bit length encodings
+		listed if available.
 		The enabled wakeup protocol is shown in [] brackets.
-		Writing "+proto" will add a protocol to the list of enabled
-		wakeup protocols.
-		Writing "-proto" will remove a protocol from the list of enabled
-		wakeup protocols.
+		Only one protocol can be selected at a time.
 		Writing "proto" will use "proto" for wakeup events.
 		Writing "none" will disable wakeup.
 		Write fails with EINVAL if an invalid protocol combination or

Documentation/media/uapi/rc/rc-sysfs-nodes.rst

@@ -92,15 +92,16 @@ This value may be reset to 0 if the current protocol is altered.
 Reading this file returns a list of available protocols to use for the
 wakeup filter, something like:
 
-``rc5 rc6 nec jvc [sony]``
+``rc-5 nec nec-x rc-6-0 rc-6-6a-24 [rc-6-6a-32] rc-6-mce``
 
-The enabled wakeup protocol is shown in [] brackets.
+Note that protocol variants are listed, so "nec", "sony", "rc-5", "rc-6"
+have their different bit length encodings listed if available.
 
-Writing "+proto" will add a protocol to the list of enabled wakeup
-protocols.
+Note that all protocol variants are listed.
 
-Writing "-proto" will remove a protocol from the list of enabled wakeup
-protocols.
+The enabled wakeup protocol is shown in [] brackets.
+
+Only one protocol can be selected at a time.
 
 Writing "proto" will use "proto" for wakeup events.
 

drivers/media/rc/img-ir/img-ir-hw.c

@@ -488,7 +488,15 @@ static int img_ir_set_filter(struct rc_dev *dev, enum rc_filter_type type,
 	/* convert scancode filter to raw filter */
 	filter.minlen = 0;
 	filter.maxlen = ~0;
-	ret = hw->decoder->filter(sc_filter, &filter, hw->enabled_protocols);
+	if (type == RC_FILTER_NORMAL) {
+		/* guess scancode from protocol */
+		ret = hw->decoder->filter(sc_filter, &filter,
+					  dev->enabled_protocols);
+	} else {
+		/* for wakeup user provided exact protocol variant */
+		ret = hw->decoder->filter(sc_filter, &filter,
+					  1ULL << dev->wakeup_protocol);
+	}
 	if (ret)
 		goto unlock;
 	dev_dbg(priv->dev, "IR raw %sfilter=%016llx & %016llx\n",
@@ -581,6 +589,7 @@ static void img_ir_set_decoder(struct img_ir_priv *priv,
 	/* clear the wakeup scancode filter */
 	rdev->scancode_wakeup_filter.data = 0;
 	rdev->scancode_wakeup_filter.mask = 0;
+	rdev->wakeup_protocol = RC_TYPE_UNKNOWN;
 
 	/* clear raw filters */
 	_img_ir_set_filter(priv, NULL);
@@ -685,7 +694,6 @@ success:
 	if (!hw->decoder || !hw->decoder->filter)
 		wakeup_protocols = 0;
 	rdev->allowed_wakeup_protocols = wakeup_protocols;
-	rdev->enabled_wakeup_protocols = wakeup_protocols;
 	return 0;
 }
 
@@ -701,7 +709,6 @@ static void img_ir_set_protocol(struct img_ir_priv *priv, u64 proto)
 	mutex_lock(&rdev->lock);
 	rdev->enabled_protocols = proto;
 	rdev->allowed_wakeup_protocols = proto;
-	rdev->enabled_wakeup_protocols = proto;
 	mutex_unlock(&rdev->lock);
 }
 

drivers/media/rc/img-ir/img-ir-nec.c

@@ -11,6 +11,7 @@
 
 #include "img-ir-hw.h"
 #include <linux/bitrev.h>
+#include <linux/log2.h>
 
 /* Convert NEC data to a scancode */
 static int img_ir_nec_scancode(int len, u64 raw, u64 enabled_protocols,
@@ -62,7 +63,23 @@ static int img_ir_nec_filter(const struct rc_scancode_filter *in,
 	data       = in->data & 0xff;
 	data_m     = in->mask & 0xff;
 
-	if ((in->data | in->mask) & 0xff000000) {
+	protocols &= RC_BIT_NEC | RC_BIT_NECX | RC_BIT_NEC32;
+
+	/*
+	 * If only one bit is set, we were requested to do an exact
+	 * protocol. This should be the case for wakeup filters; for
+	 * normal filters, guess the protocol from the scancode.
+	 */
+	if (!is_power_of_2(protocols)) {
+		if ((in->data | in->mask) & 0xff000000)
+			protocols = RC_BIT_NEC32;
+		else if ((in->data | in->mask) & 0x00ff0000)
+			protocols = RC_BIT_NECX;
+		else
+			protocols = RC_BIT_NEC;
+	}
+
+	if (protocols == RC_BIT_NEC32) {
 		/* 32-bit NEC (used by Apple and TiVo remotes) */
 		/* scan encoding: as transmitted, MSBit = first received bit */
 		addr       = bitrev8(in->data >> 24);
@@ -73,7 +90,7 @@ static int img_ir_nec_filter(const struct rc_scancode_filter *in,
 		data_m     = bitrev8(in->mask >>  8);
 		data_inv   = bitrev8(in->data >>  0);
 		data_inv_m = bitrev8(in->mask >>  0);
-	} else if ((in->data | in->mask) & 0x00ff0000) {
+	} else if (protocols == RC_BIT_NECX) {
 		/* Extended NEC */
 		/* scan encoding AAaaDD */
 		addr       = (in->data >> 16) & 0xff;

drivers/media/rc/img-ir/img-ir-sony.c

@@ -68,19 +68,29 @@ static int img_ir_sony_filter(const struct rc_scancode_filter *in,
 	func     = (in->data >> 0)  & 0x7f;
 	func_m   = (in->mask >> 0)  & 0x7f;
 
-	if (subdev & subdev_m) {
+	protocols &= RC_BIT_SONY12 | RC_BIT_SONY15 | RC_BIT_SONY20;
+
+	/*
+	 * If only one bit is set, we were requested to do an exact
+	 * protocol. This should be the case for wakeup filters; for
+	 * normal filters, guess the protocol from the scancode.
+	 */
+	if (!is_power_of_2(protocols)) {
+		if (subdev & subdev_m)
+			protocols = RC_BIT_SONY20;
+		else if (dev & dev_m & 0xe0)
+			protocols = RC_BIT_SONY15;
+		else
+			protocols = RC_BIT_SONY12;
+	}
+
+	if (protocols == RC_BIT_SONY20) {
 		/* can't encode subdev and higher device bits */
 		if (dev & dev_m & 0xe0)
 			return -EINVAL;
-		/* subdevice (extended) bits only in 20 bit encoding */
-		if (!(protocols & RC_BIT_SONY20))
-			return -EINVAL;
 		len = 20;
 		dev_m &= 0x1f;
-	} else if (dev & dev_m & 0xe0) {
-		/* upper device bits only in 15 bit encoding */
-		if (!(protocols & RC_BIT_SONY15))
-			return -EINVAL;
+	} else if (protocols == RC_BIT_SONY15) {
 		len = 15;
 		subdev_m = 0;
 	} else {

drivers/media/rc/rc-ir-raw.c

@@ -235,7 +235,6 @@ static void ir_raw_disable_protocols(struct rc_dev *dev, u64 protocols)
 {
 	mutex_lock(&dev->lock);
 	dev->enabled_protocols &= ~protocols;
-	dev->enabled_wakeup_protocols &= ~protocols;
 	mutex_unlock(&dev->lock);
 }
 

drivers/media/rc/rc-main.c

@@ -830,11 +830,6 @@ struct rc_filter_attribute {
 };
 #define to_rc_filter_attr(a) container_of(a, struct rc_filter_attribute, attr)
 
-#define RC_PROTO_ATTR(_name, _mode, _show, _store, _type)		\
-	struct rc_filter_attribute dev_attr_##_name = {			\
-		.attr = __ATTR(_name, _mode, _show, _store),		\
-		.type = (_type),					\
-	}
 #define RC_FILTER_ATTR(_name, _mode, _show, _store, _type, _mask)	\
 	struct rc_filter_attribute dev_attr_##_name = {			\
 		.attr = __ATTR(_name, _mode, _show, _store),		\
@@ -860,13 +855,13 @@ static bool lirc_is_present(void)
 }
 
 /**
- * show_protocols() - shows the current/wakeup IR protocol(s)
+ * show_protocols() - shows the current IR protocol(s)
  * @device:	the device descriptor
  * @mattr:	the device attribute struct
  * @buf:	a pointer to the output buffer
  *
  * This routine is a callback routine for input read the IR protocol type(s).
- * it is trigged by reading /sys/class/rc/rc?/[wakeup_]protocols.
+ * it is trigged by reading /sys/class/rc/rc?/protocols.
  * It returns the protocol names of supported protocols.
  * Enabled protocols are printed in brackets.
  *
@@ -877,7 +872,6 @@ static ssize_t show_protocols(struct device *device,
 			      struct device_attribute *mattr, char *buf)
 {
 	struct rc_dev *dev = to_rc_dev(device);
-	struct rc_filter_attribute *fattr = to_rc_filter_attr(mattr);
 	u64 allowed, enabled;
 	char *tmp = buf;
 	int i;
@@ -891,15 +885,10 @@ static ssize_t show_protocols(struct device *device,
 
 	mutex_lock(&dev->lock);
 
-	if (fattr->type == RC_FILTER_NORMAL) {
-		enabled = dev->enabled_protocols;
-		allowed = dev->allowed_protocols;
-		if (dev->raw && !allowed)
-			allowed = ir_raw_get_allowed_protocols();
-	} else {
-		enabled = dev->enabled_wakeup_protocols;
-		allowed = dev->allowed_wakeup_protocols;
-	}
+	enabled = dev->enabled_protocols;
+	allowed = dev->allowed_protocols;
+	if (dev->raw && !allowed)
+		allowed = ir_raw_get_allowed_protocols();
 
 	mutex_unlock(&dev->lock);
 
@@ -1058,11 +1047,8 @@ static ssize_t store_protocols(struct device *device,
 			       const char *buf, size_t len)
 {
 	struct rc_dev *dev = to_rc_dev(device);
-	struct rc_filter_attribute *fattr = to_rc_filter_attr(mattr);
 	u64 *current_protocols;
-	int (*change_protocol)(struct rc_dev *dev, u64 *rc_type);
 	struct rc_scancode_filter *filter;
-	int (*set_filter)(struct rc_dev *dev, struct rc_scancode_filter *filter);
 	u64 old_protocols, new_protocols;
 	ssize_t rc;
 
@@ -1073,21 +1059,11 @@ static ssize_t store_protocols(struct device *device,
 	if (!atomic_read(&dev->initialized))
 		return -ERESTARTSYS;
 
-	if (fattr->type == RC_FILTER_NORMAL) {
-		IR_dprintk(1, "Normal protocol change requested\n");
-		current_protocols = &dev->enabled_protocols;
-		change_protocol = dev->change_protocol;
-		filter = &dev->scancode_filter;
-		set_filter = dev->s_filter;
-	} else {
-		IR_dprintk(1, "Wakeup protocol change requested\n");
-		current_protocols = &dev->enabled_wakeup_protocols;
-		change_protocol = dev->change_wakeup_protocol;
-		filter = &dev->scancode_wakeup_filter;
-		set_filter = dev->s_wakeup_filter;
-	}
+	IR_dprintk(1, "Normal protocol change requested\n");
+	current_protocols = &dev->enabled_protocols;
+	filter = &dev->scancode_filter;
 
-	if (!change_protocol) {
+	if (!dev->change_protocol) {
 		IR_dprintk(1, "Protocol switching not supported\n");
 		return -EINVAL;
 	}
@@ -1100,7 +1076,7 @@ static ssize_t store_protocols(struct device *device,
 	if (rc < 0)
 		goto out;
 
-	rc = change_protocol(dev, &new_protocols);
+	rc = dev->change_protocol(dev, &new_protocols);
 	if (rc < 0) {
 		IR_dprintk(1, "Error setting protocols to 0x%llx\n",
 			   (long long)new_protocols);
@@ -1123,16 +1099,16 @@ static ssize_t store_protocols(struct device *device,
 	 * Try setting the same filter with the new protocol (if any).
 	 * Fall back to clearing the filter.
 	 */
-	if (set_filter && filter->mask) {
+	if (dev->s_filter && filter->mask) {
 		if (new_protocols)
-			rc = set_filter(dev, filter);
+			rc = dev->s_filter(dev, filter);
 		else
 			rc = -1;
 
 		if (rc < 0) {
 			filter->data = 0;
 			filter->mask = 0;
-			set_filter(dev, filter);
+			dev->s_filter(dev, filter);
 		}
 	}
 
@@ -1221,7 +1197,6 @@ static ssize_t store_filter(struct device *device,
 	int ret;
 	unsigned long val;
 	int (*set_filter)(struct rc_dev *dev, struct rc_scancode_filter *filter);
-	u64 *enabled_protocols;
 
 	/* Device is being removed */
 	if (!dev)
@@ -1236,11 +1211,9 @@ static ssize_t store_filter(struct device *device,
 
 	if (fattr->type == RC_FILTER_NORMAL) {
 		set_filter = dev->s_filter;
-		enabled_protocols = &dev->enabled_protocols;
 		filter = &dev->scancode_filter;
 	} else {
 		set_filter = dev->s_wakeup_filter;
-		enabled_protocols = &dev->enabled_wakeup_protocols;
 		filter = &dev->scancode_wakeup_filter;
 	}
 
@@ -1255,7 +1228,16 @@ static ssize_t store_filter(struct device *device,
 	else
 		new_filter.data = val;
 
-	if (!*enabled_protocols && val) {
+	if (fattr->type == RC_FILTER_WAKEUP) {
+		/* refuse to set a filter unless a protocol is enabled */
+		if (dev->wakeup_protocol == RC_TYPE_UNKNOWN) {
+			ret = -EINVAL;
+			goto unlock;
+		}
+	}
+
+	if (fattr->type == RC_FILTER_NORMAL && !dev->enabled_protocols &&
+	    val) {
 		/* refuse to set a filter unless a protocol is enabled */
 		ret = -EINVAL;
 		goto unlock;
@@ -1272,6 +1254,172 @@ unlock:
 	return (ret < 0) ? ret : len;
 }
 
+/*
+ * This is the list of all variants of all protocols, which is used by
+ * the wakeup_protocols sysfs entry. In the protocols sysfs entry some
+ * some protocols are grouped together (e.g. nec = nec + necx + nec32).
+ *
+ * For wakeup we need to know the exact protocol variant so the hardware
+ * can be programmed exactly what to expect.
+ */
+static const char * const proto_variant_names[] = {
+	[RC_TYPE_UNKNOWN] = "unknown",
+	[RC_TYPE_OTHER] = "other",
+	[RC_TYPE_RC5] = "rc-5",
+	[RC_TYPE_RC5X_20] = "rc-5x-20",
+	[RC_TYPE_RC5_SZ] = "rc-5-sz",
+	[RC_TYPE_JVC] = "jvc",
+	[RC_TYPE_SONY12] = "sony-12",
+	[RC_TYPE_SONY15] = "sony-15",
+	[RC_TYPE_SONY20] = "sony-20",
+	[RC_TYPE_NEC] = "nec",
+	[RC_TYPE_NECX] = "nec-x",
+	[RC_TYPE_NEC32] = "nec-32",
+	[RC_TYPE_SANYO] = "sanyo",
+	[RC_TYPE_MCE_KBD] = "mce_kbd",
+	[RC_TYPE_RC6_0] = "rc-6-0",
+	[RC_TYPE_RC6_6A_20] = "rc-6-6a-20",
+	[RC_TYPE_RC6_6A_24] = "rc-6-6a-24",
+	[RC_TYPE_RC6_6A_32] = "rc-6-6a-32",
+	[RC_TYPE_RC6_MCE] = "rc-6-mce",
+	[RC_TYPE_SHARP] = "sharp",
+	[RC_TYPE_XMP] = "xmp",
+	[RC_TYPE_CEC] = "cec",
+};
+
+/**
+ * show_wakeup_protocols() - shows the wakeup IR protocol
+ * @device:	the device descriptor
+ * @mattr:	the device attribute struct
+ * @buf:	a pointer to the output buffer
+ *
+ * This routine is a callback routine for input read the IR protocol type(s).
+ * it is trigged by reading /sys/class/rc/rc?/wakeup_protocols.
+ * It returns the protocol names of supported protocols.
+ * The enabled protocols are printed in brackets.
+ *
+ * dev->lock is taken to guard against races between device
+ * registration, store_protocols and show_protocols.
+ */
+static ssize_t show_wakeup_protocols(struct device *device,
+				     struct device_attribute *mattr,
+				     char *buf)
+{
+	struct rc_dev *dev = to_rc_dev(device);
+	u64 allowed;
+	enum rc_type enabled;
+	char *tmp = buf;
+	int i;
+
+	/* Device is being removed */
+	if (!dev)
+		return -EINVAL;
+
+	if (!atomic_read(&dev->initialized))
+		return -ERESTARTSYS;
+
+	mutex_lock(&dev->lock);
+
+	allowed = dev->allowed_wakeup_protocols;
+	enabled = dev->wakeup_protocol;
+
+	mutex_unlock(&dev->lock);
+
+	IR_dprintk(1, "%s: allowed - 0x%llx, enabled - %d\n",
+		   __func__, (long long)allowed, enabled);
+
+	for (i = 0; i < ARRAY_SIZE(proto_variant_names); i++) {
+		if (allowed & (1ULL << i)) {
+			if (i == enabled)
+				tmp += sprintf(tmp, "[%s] ",
+						proto_variant_names[i]);
+			else
+				tmp += sprintf(tmp, "%s ",
+						proto_variant_names[i]);
+		}
+	}
+
+	if (tmp != buf)
+		tmp--;
+	*tmp = '\n';
+
+	return tmp + 1 - buf;
+}
+
+/**
+ * store_wakeup_protocols() - changes the wakeup IR protocol(s)
+ * @device:	the device descriptor
+ * @mattr:	the device attribute struct
+ * @buf:	a pointer to the input buffer
+ * @len:	length of the input buffer
+ *
+ * This routine is for changing the IR protocol type.
+ * It is trigged by writing to /sys/class/rc/rc?/wakeup_protocols.
+ * Returns @len on success or a negative error code.
+ *
+ * dev->lock is taken to guard against races between device
+ * registration, store_protocols and show_protocols.
+ */
+static ssize_t store_wakeup_protocols(struct device *device,
+				      struct device_attribute *mattr,
+				      const char *buf, size_t len)
+{
+	struct rc_dev *dev = to_rc_dev(device);
+	enum rc_type protocol;
+	ssize_t rc;
+	u64 allowed;
+	int i;
+
+	/* Device is being removed */
+	if (!dev)
+		return -EINVAL;
+
+	if (!atomic_read(&dev->initialized))
+		return -ERESTARTSYS;
+
+	mutex_lock(&dev->lock);
+
+	allowed = dev->allowed_wakeup_protocols;
+
+	if (sysfs_streq(buf, "none")) {
+		protocol = RC_TYPE_UNKNOWN;
+	} else {
+		for (i = 0; i < ARRAY_SIZE(proto_variant_names); i++) {
+			if ((allowed & (1ULL << i)) &&
+			    sysfs_streq(buf, proto_variant_names[i])) {
+				protocol = i;
+				break;
+			}
+		}
+
+		if (i == ARRAY_SIZE(proto_variant_names)) {
+			rc = -EINVAL;
+			goto out;
+		}
+	}
+
+	if (dev->wakeup_protocol != protocol) {
+		dev->wakeup_protocol = protocol;
+		IR_dprintk(1, "Wakeup protocol changed to %d\n", protocol);
+
+		if (protocol == RC_TYPE_RC6_MCE)
+			dev->scancode_wakeup_filter.data = 0x800f0000;
+		else
+			dev->scancode_wakeup_filter.data = 0;
+		dev->scancode_wakeup_filter.mask = 0;
+
+		rc = dev->s_wakeup_filter(dev, &dev->scancode_wakeup_filter);
+		if (rc == 0)
+			rc = len;
+	} else {
+		rc = len;
+	}
+
+out:
+	mutex_unlock(&dev->lock);
+	return rc;
+}
+
 static void rc_dev_release(struct device *device)
 {
 	struct rc_dev *dev = to_rc_dev(device);
@@ -1301,10 +1449,9 @@ static int rc_dev_uevent(struct device *device, struct kobj_uevent_env *env)
 /*
  * Static device attribute struct with the sysfs attributes for IR's
  */
-static RC_PROTO_ATTR(protocols, S_IRUGO | S_IWUSR,
-		     show_protocols, store_protocols, RC_FILTER_NORMAL);
-static RC_PROTO_ATTR(wakeup_protocols, S_IRUGO | S_IWUSR,
-		     show_protocols, store_protocols, RC_FILTER_WAKEUP);
+static DEVICE_ATTR(protocols, 0644, show_protocols, store_protocols);
+static DEVICE_ATTR(wakeup_protocols, 0644, show_wakeup_protocols,
+		   store_wakeup_protocols);
 static RC_FILTER_ATTR(filter, S_IRUGO|S_IWUSR,
 		      show_filter, store_filter, RC_FILTER_NORMAL, false);
 static RC_FILTER_ATTR(filter_mask, S_IRUGO|S_IWUSR,
@@ -1315,7 +1462,7 @@ static RC_FILTER_ATTR(wakeup_filter_mask, S_IRUGO|S_IWUSR,
 		      show_filter, store_filter, RC_FILTER_WAKEUP, true);
 
 static struct attribute *rc_dev_protocol_attrs[] = {
-	&dev_attr_protocols.attr.attr,
+	&dev_attr_protocols.attr,
 	NULL,
 };
 
@@ -1323,15 +1470,6 @@ static struct attribute_group rc_dev_protocol_attr_grp = {
 	.attrs	= rc_dev_protocol_attrs,
 };
 
-static struct attribute *rc_dev_wakeup_protocol_attrs[] = {
-	&dev_attr_wakeup_protocols.attr.attr,
-	NULL,
-};
-
-static struct attribute_group rc_dev_wakeup_protocol_attr_grp = {
-	.attrs	= rc_dev_wakeup_protocol_attrs,
-};
-
 static struct attribute *rc_dev_filter_attrs[] = {
 	&dev_attr_filter.attr.attr,
 	&dev_attr_filter_mask.attr.attr,
@@ -1345,6 +1483,7 @@ static struct attribute_group rc_dev_filter_attr_grp = {
 static struct attribute *rc_dev_wakeup_filter_attrs[] = {
 	&dev_attr_wakeup_filter.attr.attr,
 	&dev_attr_wakeup_filter_mask.attr.attr,
+	&dev_attr_wakeup_protocols.attr,
 	NULL,
 };
 
@@ -1475,8 +1614,6 @@ int rc_register_device(struct rc_dev *dev)
 		dev->sysfs_groups[attr++] = &rc_dev_filter_attr_grp;
 	if (dev->s_wakeup_filter)
 		dev->sysfs_groups[attr++] = &rc_dev_wakeup_filter_attr_grp;
-	if (dev->change_wakeup_protocol)
-		dev->sysfs_groups[attr++] = &rc_dev_wakeup_protocol_attr_grp;
 	dev->sysfs_groups[attr++] = NULL;
 
 	rc = device_add(&dev->dev);

include/media/rc-core.h

@@ -86,7 +86,8 @@ enum rc_filter_type {
  * @allowed_protocols: bitmask with the supported RC_BIT_* protocols
  * @enabled_protocols: bitmask with the enabled RC_BIT_* protocols
  * @allowed_wakeup_protocols: bitmask with the supported RC_BIT_* wakeup protocols
- * @enabled_wakeup_protocols: bitmask with the enabled RC_BIT_* wakeup protocols
+ * @wakeup_protocol: the enabled RC_TYPE_* wakeup protocol or
+ *	RC_TYPE_UNKNOWN if disabled.
  * @scancode_filter: scancode filter
  * @scancode_wakeup_filter: scancode wakeup filters
  * @scancode_mask: some hardware decoders are not capable of providing the full
@@ -110,8 +111,6 @@ enum rc_filter_type {
  * @rx_resolution : resolution (in ns) of input sampler
  * @tx_resolution: resolution (in ns) of output sampler
  * @change_protocol: allow changing the protocol used on hardware decoders
- * @change_wakeup_protocol: allow changing the protocol used for wakeup
- *	filtering
  * @open: callback to allow drivers to enable polling/irq when IR input device
  *	is opened.
  * @close: callback to allow drivers to disable polling/irq when IR input device
@@ -126,7 +125,9 @@ enum rc_filter_type {
  * @s_learning_mode: enable wide band receiver used for learning
  * @s_carrier_report: enable carrier reports
  * @s_filter: set the scancode filter
- * @s_wakeup_filter: set the wakeup scancode filter
+ * @s_wakeup_filter: set the wakeup scancode filter. If the mask is zero
+ *	then wakeup should be disabled. wakeup_protocol will be set to
+ *	a valid protocol if mask is nonzero.
  * @s_timeout: set hardware timeout in ns
  */
 struct rc_dev {
@@ -149,7 +150,7 @@ struct rc_dev {
 	u64				allowed_protocols;
 	u64				enabled_protocols;
 	u64				allowed_wakeup_protocols;
-	u64				enabled_wakeup_protocols;
+	enum rc_type			wakeup_protocol;
 	struct rc_scancode_filter	scancode_filter;
 	struct rc_scancode_filter	scancode_wakeup_filter;
 	u32				scancode_mask;
@@ -169,7 +170,6 @@ struct rc_dev {
 	u32				rx_resolution;
 	u32				tx_resolution;
 	int				(*change_protocol)(struct rc_dev *dev, u64 *rc_type);
-	int				(*change_wakeup_protocol)(struct rc_dev *dev, u64 *rc_type);
 	int				(*open)(struct rc_dev *dev);
 	void				(*close)(struct rc_dev *dev);
 	int				(*s_tx_mask)(struct rc_dev *dev, u32 mask);