staging:iio:ad7606: Remove redundant name field from ad7606_chip_info

The name field in the ad7606_chip_info struct is set to the same value as
the as the name field in the corresponding {platform,spi}_device_id table
entry. Remove it from the ad7606_chip_info struct and pass the name from
the ID to the probe function. This slightly reduces the size of the
chip_info table and adding new entries requires less boilerplate.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

drivers/staging/iio/adc/ad7606.h

@@ -48,7 +48,6 @@ struct ad7606_platform_data {
  */
 
 struct ad7606_chip_info {
-	const char			*name;
 	const struct iio_chan_spec	*channels;
 	unsigned int			num_channels;
 };
@@ -84,7 +83,8 @@ struct ad7606_bus_ops {
 };
 
 struct iio_dev *ad7606_probe(struct device *dev, int irq,
-			      void __iomem *base_address, unsigned int id,
+			      void __iomem *base_address,
+			      const char *name, unsigned int id,
 			      const struct ad7606_bus_ops *bops);
 int ad7606_remove(struct iio_dev *indio_dev, int irq);
 int ad7606_reset(struct ad7606_state *st);

drivers/staging/iio/adc/ad7606_core.c

@@ -260,17 +260,14 @@ static const struct ad7606_chip_info ad7606_chip_info_tbl[] = {
 	 * More devices added in future
 	 */
 	[ID_AD7606_8] = {
-		.name = "ad7606",
 		.channels = ad7606_channels,
 		.num_channels = 9,
 	},
 	[ID_AD7606_6] = {
-		.name = "ad7606-6",
 		.channels = ad7606_channels,
 		.num_channels = 7,
 	},
 	[ID_AD7606_4] = {
-		.name = "ad7606-4",
 		.channels = ad7606_channels,
 		.num_channels = 5,
 	},
@@ -438,7 +435,7 @@ static const struct iio_info ad7606_info_range = {
 
 struct iio_dev *ad7606_probe(struct device *dev, int irq,
 			     void __iomem *base_address,
-			     unsigned int id,
+			     const char *name, unsigned int id,
 			     const struct ad7606_bus_ops *bops)
 {
 	struct ad7606_platform_data *pdata = dev->platform_data;
@@ -491,7 +488,7 @@ struct iio_dev *ad7606_probe(struct device *dev, int irq,
 			indio_dev->info = &ad7606_info_no_os_or_range;
 	}
 	indio_dev->modes = INDIO_DIRECT_MODE;
-	indio_dev->name = st->chip_info->name;
+	indio_dev->name = name;
 	indio_dev->channels = st->chip_info->channels;
 	indio_dev->num_channels = st->chip_info->num_channels;
 
@@ -505,8 +502,8 @@ struct iio_dev *ad7606_probe(struct device *dev, int irq,
 	if (ret)
 		dev_warn(st->dev, "failed to RESET: no RESET GPIO specified\n");
 
-	ret = request_irq(irq, ad7606_interrupt,
-			  IRQF_TRIGGER_FALLING, st->chip_info->name, indio_dev);
+	ret = request_irq(irq, ad7606_interrupt, IRQF_TRIGGER_FALLING, name,
+			  indio_dev);
 	if (ret)
 		goto error_free_gpios;
 

drivers/staging/iio/adc/ad7606_par.c

@@ -49,6 +49,7 @@ static const struct ad7606_bus_ops ad7606_par8_bops = {
 
 static int ad7606_par_probe(struct platform_device *pdev)
 {
+	const struct platform_device_id *id = platform_get_device_id(pdev);
 	struct resource *res;
 	struct iio_dev *indio_dev;
 	void __iomem *addr;
@@ -69,7 +70,7 @@ static int ad7606_par_probe(struct platform_device *pdev)
 	remap_size = resource_size(res);
 
 	indio_dev = ad7606_probe(&pdev->dev, irq, addr,
-				 platform_get_device_id(pdev)->driver_data,
+				 id->name, id->driver_data,
 				 remap_size > 1 ? &ad7606_par16_bops :
 				 &ad7606_par8_bops);
 

drivers/staging/iio/adc/ad7606_spi.c

@@ -42,10 +42,11 @@ static const struct ad7606_bus_ops ad7606_spi_bops = {
 
 static int ad7606_spi_probe(struct spi_device *spi)
 {
+	const struct spi_device_id *id = spi_get_device_id(spi);
 	struct iio_dev *indio_dev;
 
 	indio_dev = ad7606_probe(&spi->dev, spi->irq, NULL,
-				 spi_get_device_id(spi)->driver_data,
+				 id->name, id->driver_data,
 				 &ad7606_spi_bops);
 
 	if (IS_ERR(indio_dev))