Merge remote-tracking branch 'airlied/drm-next' into drm-intel-next-queued

Pull in latest drm-next from Dave Airlie to get at all the drm-misc
goodies, specifically:
- dma_fence error state handling rework (Chris needs that for error
  recovery)
- crc support locking changes (Tomeu's i915 crc patches need that).

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

Documentation/admin-guide/kernel-parameters.txt

@@ -106,6 +106,16 @@
 			use by PCI
 			Format: <irq>,<irq>...
 
+	acpi_mask_gpe=  [HW,ACPI]
+			Due to the existence of _Lxx/_Exx, some GPEs triggered
+			by unsupported hardware/firmware features can result in
+                        GPE floodings that cannot be automatically disabled by
+                        the GPE dispatcher.
+			This facility can be used to prevent such uncontrolled
+			GPE floodings.
+			Format: <int>
+			Support masking of GPEs numbered from 0x00 to 0x7f.
+
 	acpi_no_auto_serialize	[HW,ACPI]
 			Disable auto-serialization of AML methods
 			AML control methods that contain the opcodes to create
@@ -3811,10 +3821,11 @@
 			it if 0 is given (See Documentation/cgroup-v1/memory.txt)
 
 	swiotlb=	[ARM,IA-64,PPC,MIPS,X86]
-			Format: { <int> | force }
+			Format: { <int> | force | noforce }
 			<int> -- Number of I/O TLB slabs
 			force -- force using of bounce buffers even if they
 			         wouldn't be automatically used by the kernel
+			noforce -- Never use bounce buffers (for debugging)
 
 	switches=	[HW,M68k]
 

Documentation/block/queue-sysfs.txt

@@ -54,9 +54,9 @@ This is the hardware sector size of the device, in bytes.
 
 io_poll (RW)
 ------------
-When read, this file shows the total number of block IO polls and how
-many returned success.  Writing '0' to this file will disable polling
-for this device.  Writing any non-zero value will enable this feature.
+When read, this file shows whether polling is enabled (1) or disabled
+(0).  Writing '0' to this file will disable polling for this device.
+Writing any non-zero value will enable this feature.
 
 io_poll_delay (RW)
 ------------------

Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt

@@ -8,8 +8,9 @@ This driver provides a simple power button event via an Interrupt.
 Required properties:
 - compatible: should be "ti,tps65217-pwrbutton" or "ti,tps65218-pwrbutton"
 
-Required properties for TPS65218:
+Required properties:
 - interrupts: should be one of the following
+   - <2>: For controllers compatible with tps65217
    - <3 IRQ_TYPE_EDGE_BOTH>: For controllers compatible with tps65218
 
 Examples:
@@ -17,6 +18,7 @@ Examples:
 &tps {
 	tps65217-pwrbutton {
 		compatible = "ti,tps65217-pwrbutton";
+		interrupts = <2>;
 	};
 };
 

Documentation/devicetree/bindings/power/supply/tps65217_charger.txt

@@ -2,11 +2,16 @@ TPS65217 Charger
 
 Required Properties:
 -compatible: "ti,tps65217-charger"
+-interrupts: TPS65217 interrupt numbers for the AC and USB charger input change.
+             Should be <0> for the USB charger and <1> for the AC adapter.
+-interrupt-names: Should be "USB" and "AC"
 
 This node is a subnode of the tps65217 PMIC.
 
 Example:
 
 	tps65217-charger {
-		compatible = "ti,tps65090-charger";
+		compatible = "ti,tps65217-charger";
+		interrupts = <0>, <1>;
+		interrupt-names = "USB", "AC";
 	};

Documentation/driver-api/infrastructure.rst

@@ -55,21 +55,6 @@ Device Drivers DMA Management
 .. kernel-doc:: drivers/base/dma-mapping.c
    :export:
 
-Device Drivers Power Management
--------------------------------
-
-.. kernel-doc:: drivers/base/power/main.c
-   :export:
-
-Device Drivers ACPI Support
----------------------------
-
-.. kernel-doc:: drivers/acpi/scan.c
-   :export:
-
-.. kernel-doc:: drivers/acpi/scan.c
-   :internal:
-
 Device drivers PnP support
 --------------------------
 

Documentation/gpu/drm-mm.rst

@@ -34,25 +34,26 @@ TTM initialization
 ------------------
 
     **Warning**
-
     This section is outdated.
 
-Drivers wishing to support TTM must fill out a drm_bo_driver
-structure. The structure contains several fields with function pointers
-for initializing the TTM, allocating and freeing memory, waiting for
-command completion and fence synchronization, and memory migration. See
-the radeon_ttm.c file for an example of usage.
+Drivers wishing to support TTM must pass a filled :c:type:`ttm_bo_driver
+<ttm_bo_driver>` structure to ttm_bo_device_init, together with an
+initialized global reference to the memory manager.  The ttm_bo_driver
+structure contains several fields with function pointers for
+initializing the TTM, allocating and freeing memory, waiting for command
+completion and fence synchronization, and memory migration.
 
-The ttm_global_reference structure is made up of several fields:
+The :c:type:`struct drm_global_reference <drm_global_reference>` is made
+up of several fields:
 
 .. code-block:: c
 
-              struct ttm_global_reference {
+              struct drm_global_reference {
                       enum ttm_global_types global_type;
                       size_t size;
                       void *object;
-                      int (*init) (struct ttm_global_reference *);
-                      void (*release) (struct ttm_global_reference *);
+                      int (*init) (struct drm_global_reference *);
+                      void (*release) (struct drm_global_reference *);
               };
 
 
@@ -76,6 +77,12 @@ ttm_bo_global_release(), respectively. Also, like the previous
 object, ttm_global_item_ref() is used to create an initial reference
 count for the TTM, which will call your initialization function.
 
+See the radeon_ttm.c file for an example of usage.
+
+.. kernel-doc:: drivers/gpu/drm/drm_global.c
+   :export:
+
+
 The Graphics Execution Manager (GEM)
 ====================================
 
@@ -303,6 +310,17 @@ created.
 Drivers that want to map the GEM object upfront instead of handling page
 faults can implement their own mmap file operation handler.
 
+For platforms without MMU the GEM core provides a helper method
+:c:func:`drm_gem_cma_get_unmapped_area`. The mmap() routines will call
+this to get a proposed address for the mapping.
+
+To use :c:func:`drm_gem_cma_get_unmapped_area`, drivers must fill the
+struct :c:type:`struct file_operations <file_operations>` get_unmapped_area
+field with a pointer on :c:func:`drm_gem_cma_get_unmapped_area`.
+
+More detailed information about get_unmapped_area can be found in
+Documentation/nommu-mmap.txt
+
 Memory Coherency
 ----------------
 
@@ -442,7 +460,7 @@ LRU Scan/Eviction Support
 -------------------------
 
 .. kernel-doc:: drivers/gpu/drm/drm_mm.c
-   :doc: lru scan roaster
+   :doc: lru scan roster
 
 DRM MM Range Allocator Function References
 ------------------------------------------

Documentation/gpu/drm-uapi.rst

@@ -156,8 +156,12 @@ other hand, a driver requires shared state between clients which is
 visible to user-space and accessible beyond open-file boundaries, they
 cannot support render nodes.
 
+
+Testing and validation
+======================
+
 Validating changes with IGT
-===========================
+---------------------------
 
 There's a collection of tests that aims to cover the whole functionality of
 DRM drivers and that can be used to check that changes to DRM drivers or the
@@ -193,6 +197,12 @@ run-tests.sh is a wrapper around piglit that will execute the tests matching
 the -t options. A report in HTML format will be available in
 ./results/html/index.html. Results can be compared with piglit.
 
+Display CRC Support
+-------------------
+
+.. kernel-doc:: drivers/gpu/drm/drm_debugfs_crc.c
+   :doc: CRC ABI
+
 VBlank event handling
 =====================
 
@@ -209,16 +219,3 @@ DRM_IOCTL_MODESET_CTL
     mode setting, since on many devices the vertical blank counter is
     reset to 0 at some point during modeset. Modern drivers should not
     call this any more since with kernel mode setting it is a no-op.
-
-This second part of the GPU Driver Developer's Guide documents driver
-code, implementation details and also all the driver-specific userspace
-interfaces. Especially since all hardware-acceleration interfaces to
-userspace are driver specific for efficiency and other reasons these
-interfaces can be rather substantial. Hence every driver has its own
-chapter.
-
-Testing and validation
-======================
-
-.. kernel-doc:: drivers/gpu/drm/drm_debugfs_crc.c
-   :doc: CRC ABI

Documentation/gpu/introduction.rst

@@ -23,13 +23,12 @@ For consistency this documentation uses American English. Abbreviations
 are written as all-uppercase, for example: DRM, KMS, IOCTL, CRTC, and so
 on. To aid in reading, documentations make full use of the markup
 characters kerneldoc provides: @parameter for function parameters,
-@member for structure members, &structure to reference structures and
-function() for functions. These all get automatically hyperlinked if
-kerneldoc for the referenced objects exists. When referencing entries in
-function vtables please use ->vfunc(). Note that kerneldoc does not
-support referencing struct members directly, so please add a reference
-to the vtable struct somewhere in the same paragraph or at least
-section.
+@member for structure members (within the same structure), &struct structure to
+reference structures and function() for functions. These all get automatically
+hyperlinked if kerneldoc for the referenced objects exists. When referencing
+entries in function vtables (and structure members in general) please use
+&vtable_name.vfunc. Unfortunately this does not yet yield a direct link to the
+member, only the structure.
 
 Except in special situations (to separate locked from unlocked variants)
 locking requirements for functions aren't documented in the kerneldoc.
@@ -49,3 +48,5 @@ section name should be all upper-case or not, and whether it should end
 in a colon or not. Go with the file-local style. Other common section
 names are "Notes" with information for dangerous or tricky corner cases,
 and "FIXME" where the interface could be cleaned up.
+
+Also read the :ref:`guidelines for the kernel documentation at large <doc_guide>`.

Documentation/networking/mpls-sysctl.txt

@@ -5,8 +5,8 @@ platform_labels - INTEGER
 	possible to configure forwarding for label values equal to or
 	greater than the number of platform labels.
 
-	A dense utliziation of the entries in the platform label table
-	is possible and expected aas the platform labels are locally
+	A dense utilization of the entries in the platform label table
+	is possible and expected as the platform labels are locally
 	allocated.
 
 	If the number of platform label table entries is set to 0 no

Documentation/vfio-mediated-device.txt

@@ -127,22 +127,22 @@ the VFIO when devices are unbound from the driver.
 Physical Device Driver Interface
 --------------------------------
 
-The physical device driver interface provides the parent_ops[3] structure to
-define the APIs to manage work in the mediated core driver that is related to
-the physical device.
+The physical device driver interface provides the mdev_parent_ops[3] structure
+to define the APIs to manage work in the mediated core driver that is related
+to the physical device.
 
-The structures in the parent_ops structure are as follows:
+The structures in the mdev_parent_ops structure are as follows:
 
 * dev_attr_groups: attributes of the parent device
 * mdev_attr_groups: attributes of the mediated device
 * supported_config: attributes to define supported configurations
 
-The functions in the parent_ops structure are as follows:
+The functions in the mdev_parent_ops structure are as follows:
 
 * create: allocate basic resources in a driver for a mediated device
 * remove: free resources in a driver when a mediated device is destroyed
 
-The callbacks in the parent_ops structure are as follows:
+The callbacks in the mdev_parent_ops structure are as follows:
 
 * open: open callback of mediated device
 * close: close callback of mediated device
@@ -151,14 +151,14 @@ The callbacks in the parent_ops structure are as follows:
 * write: write emulation callback
 * mmap: mmap emulation callback
 
-A driver should use the parent_ops structure in the function call to register
-itself with the mdev core driver:
+A driver should use the mdev_parent_ops structure in the function call to
+register itself with the mdev core driver:
 
 extern int  mdev_register_device(struct device *dev,
-                                 const struct parent_ops *ops);
+                                 const struct mdev_parent_ops *ops);
 
-However, the parent_ops structure is not required in the function call that a
-driver should use to unregister itself with the mdev core driver:
+However, the mdev_parent_ops structure is not required in the function call
+that a driver should use to unregister itself with the mdev core driver:
 
 extern void mdev_unregister_device(struct device *dev);
 
@@ -223,6 +223,9 @@ Directories and files under the sysfs for Each Physical Device
 
 	sprintf(buf, "%s-%s", dev_driver_string(parent->dev), group->name);
 
+  (or using mdev_parent_dev(mdev) to arrive at the parent device outside
+   of the core mdev code)
+
 * device_api
 
   This attribute should show which device API is being created, for example,
@@ -394,5 +397,5 @@ References
 
 [1] See Documentation/vfio.txt for more information on VFIO.
 [2] struct mdev_driver in include/linux/mdev.h
-[3] struct parent_ops in include/linux/mdev.h
+[3] struct mdev_parent_ops in include/linux/mdev.h
 [4] struct vfio_iommu_driver_ops in include/linux/vfio.h

MAINTAINERS

@@ -3800,6 +3800,7 @@ F:	include/linux/devcoredump.h
 DEVICE FREQUENCY (DEVFREQ)
 M:	MyungJoo Ham <myungjoo.ham@samsung.com>
 M:	Kyungmin Park <kyungmin.park@samsung.com>
+R:	Chanwoo Choi <cw00.choi@samsung.com>
 L:	linux-pm@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mzx/devfreq.git
 S:	Maintained
@@ -5080,9 +5081,11 @@ F:	drivers/net/wan/dlci.c
 F:	drivers/net/wan/sdla.c
 
 FRAMEBUFFER LAYER
+M:	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
 L:	linux-fbdev@vger.kernel.org
+T:	git git://github.com/bzolnier/linux.git
 Q:	http://patchwork.kernel.org/project/linux-fbdev/list/
-S:	Orphan
+S:	Maintained
 F:	Documentation/fb/
 F:	drivers/video/
 F:	include/video/
@@ -5504,6 +5507,7 @@ M:	Alex Elder <elder@kernel.org>
 M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 S:	Maintained
 F:	drivers/staging/greybus/
+L:	greybus-dev@lists.linaro.org
 
 GREYBUS AUDIO PROTOCOLS DRIVERS
 M:	Vaibhav Agarwal <vaibhav.sr@gmail.com>
@@ -5961,6 +5965,7 @@ F:	drivers/media/platform/sti/hva
 Hyper-V CORE AND DRIVERS
 M:	"K. Y. Srinivasan" <kys@microsoft.com>
 M:	Haiyang Zhang <haiyangz@microsoft.com>
+M:	Stephen Hemminger <sthemmin@microsoft.com>
 L:	devel@linuxdriverproject.org
 S:	Maintained
 F:	arch/x86/include/asm/mshyperv.h
@@ -8852,17 +8857,22 @@ F:	drivers/video/fbdev/nvidia/
 NVM EXPRESS DRIVER
 M:	Keith Busch <keith.busch@intel.com>
 M:	Jens Axboe <axboe@fb.com>
+M:	Christoph Hellwig <hch@lst.de>
+M:	Sagi Grimberg <sagi@grimberg.me>
 L:	linux-nvme@lists.infradead.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git
-W:	https://kernel.googlesource.com/pub/scm/linux/kernel/git/axboe/linux-block/
+T:	git://git.infradead.org/nvme.git
+W:	http://git.infradead.org/nvme.git
 S:	Supported
 F:	drivers/nvme/host/
 F:	include/linux/nvme.h
+F:	include/uapi/linux/nvme_ioctl.h
 
 NVM EXPRESS TARGET DRIVER
 M:	Christoph Hellwig <hch@lst.de>
 M:	Sagi Grimberg <sagi@grimberg.me>
 L:	linux-nvme@lists.infradead.org
+T:	git://git.infradead.org/nvme.git
+W:	http://git.infradead.org/nvme.git
 S:	Supported
 F:	drivers/nvme/target/
 
@@ -9842,7 +9852,7 @@ M:	Mark Rutland <mark.rutland@arm.com>
 M:	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
 L:	linux-arm-kernel@lists.infradead.org
 S:	Maintained
-F:	drivers/firmware/psci.c
+F:	drivers/firmware/psci*.c
 F:	include/linux/psci.h
 F:	include/uapi/linux/psci.h
 
@@ -13527,11 +13537,11 @@ F:	arch/x86/xen/*swiotlb*
 F:	drivers/xen/*swiotlb*
 
 XFS FILESYSTEM
-M:	Dave Chinner <david@fromorbit.com>
+M:	Darrick J. Wong <darrick.wong@oracle.com>
 M:	linux-xfs@vger.kernel.org
 L:	linux-xfs@vger.kernel.org
 W:	http://xfs.org/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs.git
+T:	git git://git.kernel.org/pub/scm/fs/xfs/xfs-linux.git
 S:	Supported
 F:	Documentation/filesystems/xfs.txt
 F:	fs/xfs/

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 10
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
 NAME = Roaring Lionus
 
 # *DOCUMENTATION*

arch/arm/Kconfig

@@ -1502,8 +1502,7 @@ source kernel/Kconfig.preempt
 
 config HZ_FIXED
 	int
-	default 200 if ARCH_EBSA110 || ARCH_S3C24XX || \
-		ARCH_S5PV210 || ARCH_EXYNOS4
+	default 200 if ARCH_EBSA110
 	default 128 if SOC_AT91RM9200
 	default 0
 

arch/arm/boot/dts/Makefile

@@ -501,6 +501,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \
 	am3517-evm.dtb \
 	am3517_mt_ventoux.dtb \
 	logicpd-torpedo-37xx-devkit.dtb \
+	logicpd-som-lv-37xx-devkit.dtb \
 	omap3430-sdp.dtb \
 	omap3-beagle.dtb \
 	omap3-beagle-xm.dtb \

arch/arm/boot/dts/am335x-bone-common.dtsi

@@ -6,8 +6,6 @@
  * published by the Free Software Foundation.
  */
 
-#include <dt-bindings/mfd/tps65217.h>
-
 / {
 	cpus {
 		cpu@0 {
@@ -319,13 +317,13 @@
 	ti,pmic-shutdown-controller;
 
 	charger {
-		interrupts = <TPS65217_IRQ_AC>, <TPS65217_IRQ_USB>;
-		interrupts-names = "AC", "USB";
+		interrupts = <0>, <1>;
+		interrupt-names = "USB", "AC";
 		status = "okay";
 	};
 
 	pwrbutton {
-		interrupts = <TPS65217_IRQ_PB>;
+		interrupts = <2>;
 		status = "okay";
 	};
 

arch/arm/boot/dts/am33xx.dtsi

@@ -16,6 +16,7 @@
 	interrupt-parent = <&intc>;
 	#address-cells = <1>;
 	#size-cells = <1>;
+	chosen { };
 
 	aliases {
 		i2c0 = &i2c0;

arch/arm/boot/dts/am4372.dtsi

@@ -16,6 +16,7 @@
 	interrupt-parent = <&wakeupgen>;
 	#address-cells = <1>;
 	#size-cells = <1>;
+	chosen { };
 
 	memory@0 {
 		device_type = "memory";

arch/arm/boot/dts/am571x-idk.dts

@@ -62,11 +62,6 @@
 			linux,default-trigger = "mmc0";
 		};
 	};
-
-	extcon_usb2: extcon_usb2 {
-	     compatible = "linux,extcon-usb-gpio";
-	     id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
-	};
 };
 
 &mmc1 {
@@ -79,3 +74,8 @@
 &omap_dwc3_2 {
 	extcon = <&extcon_usb2>;
 };
+
+&extcon_usb2 {
+	id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+	vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>;
+};

arch/arm/boot/dts/am572x-idk.dts

@@ -23,11 +23,6 @@
 		reg = <0x0 0x80000000 0x0 0x80000000>;
 	};
 
-	extcon_usb2: extcon_usb2 {
-		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
-	};
-
 	status-leds {
 		compatible = "gpio-leds";
 		cpu0-led {
@@ -76,6 +71,11 @@
 	extcon = <&extcon_usb2>;
 };
 
+&extcon_usb2 {
+	id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+	vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>;
+};
+
 &mmc1 {
 	status = "okay";
 	vmmc-supply = <&v3_3d>;
@@ -87,3 +87,7 @@
 &sn65hvs882 {
 	load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
 };
+
+&pcie1 {
+	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+};

arch/arm/boot/dts/am57xx-idk-common.dtsi

@@ -303,6 +303,13 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
+
+		extcon_usb2: tps659038_usb {
+			compatible = "ti,palmas-usb-vid";
+			ti,enable-vbus-detection;
+			ti,enable-id-detection;
+			/* ID & VBUS GPIOs provided in board dts */
+		};
 	};
 };
 
@@ -369,7 +376,7 @@
 };
 
 &usb2 {
-	dr_mode = "otg";
+	dr_mode = "peripheral";
 };
 
 &mmc2 {

arch/arm/boot/dts/dm814x.dtsi

@@ -12,6 +12,7 @@
 	interrupt-parent = <&intc>;
 	#address-cells = <1>;
 	#size-cells = <1>;
+	chosen { };
 
 	aliases {
 		i2c0 = &i2c1;

arch/arm/boot/dts/dm816x.dtsi

@@ -12,6 +12,7 @@
 	interrupt-parent = <&intc>;
 	#address-cells = <1>;
 	#size-cells = <1>;
+	chosen { };
 
 	aliases {
 		i2c0 = &i2c1;

arch/arm/boot/dts/dra7.dtsi

@@ -18,6 +18,7 @@
 
 	compatible = "ti,dra7xx";
 	interrupt-parent = <&crossbar_mpu>;
+	chosen { };
 
 	aliases {
 		i2c0 = &i2c1;

arch/arm/boot/dts/dra72-evm-tps65917.dtsi

@@ -132,3 +132,19 @@
 		ti,palmas-long-press-seconds = <6>;
 	};
 };
+
+&usb2_phy1 {
+	phy-supply = <&ldo4_reg>;
+};
+
+&usb2_phy2 {
+	phy-supply = <&ldo4_reg>;
+};
+
+&dss {
+	vdda_video-supply = <&ldo5_reg>;
+};
+
+&mmc1 {
+	vmmc_aux-supply = <&ldo1_reg>;
+};

arch/arm/boot/dts/imx31.dtsi

@@ -31,11 +31,11 @@
 		};
 	};
 
-	avic: avic-interrupt-controller@60000000 {
+	avic: interrupt-controller@68000000 {
 		compatible = "fsl,imx31-avic", "fsl,avic";
 		interrupt-controller;
 		#interrupt-cells = <1>;
-		reg = <0x60000000 0x100000>;
+		reg = <0x68000000 0x100000>;
 	};
 
 	soc {

arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi

@@ -533,7 +533,6 @@
 				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17071
 				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17071
 				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17071
-				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x000b0
 			>;
 		};
 

arch/arm/boot/dts/imx6qdl.dtsi

@@ -1100,6 +1100,7 @@
 				interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6QDL_CLK_EIM_SLOW>;
 				fsl,weim-cs-gpr = <&gpr>;
+				status = "disabled";
 			};
 
 			ocotp: ocotp@021bc000 {

arch/arm/boot/dts/imx6sl.dtsi

@@ -900,6 +900,7 @@
 				reg = <0x021b8000 0x4000>;
 				interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
 				fsl,weim-cs-gpr = <&gpr>;
+				status = "disabled";
 			};
 
 			ocotp: ocotp@021bc000 {

arch/arm/boot/dts/imx6sx.dtsi

@@ -977,6 +977,7 @@
 				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SX_CLK_EIM_SLOW>;
 				fsl,weim-cs-gpr = <&gpr>;
+				status = "disabled";
 			};
 
 			ocotp: ocotp@021bc000 {

arch/arm/boot/dts/omap2.dtsi

@@ -17,6 +17,7 @@
 	interrupt-parent = <&intc>;
 	#address-cells = <1>;
 	#size-cells = <1>;
+	chosen { };
 
 	aliases {
 		serial0 = &uart1;

arch/arm/boot/dts/omap3-n900.dts

@@ -734,6 +734,8 @@
 	vmmc_aux-supply = <&vsim>;
 	bus-width = <8>;
 	non-removable;
+	no-sdio;
+	no-sd;
 };
 
 &mmc3 {

arch/arm/boot/dts/omap3.dtsi

@@ -17,6 +17,7 @@
 	interrupt-parent = <&intc>;
 	#address-cells = <1>;
 	#size-cells = <1>;
+	chosen { };
 
 	aliases {
 		i2c0 = &i2c1;

arch/arm/boot/dts/omap4.dtsi

@@ -15,6 +15,7 @@
 	interrupt-parent = <&wakeupgen>;
 	#address-cells = <1>;
 	#size-cells = <1>;
+	chosen { };
 
 	aliases {
 		i2c0 = &i2c1;

arch/arm/boot/dts/omap5.dtsi

@@ -17,6 +17,7 @@
 
 	compatible = "ti,omap5";
 	interrupt-parent = <&wakeupgen>;
+	chosen { };
 
 	aliases {
 		i2c0 = &i2c1;

arch/arm/boot/dts/qcom-apq8064.dtsi

@@ -4,6 +4,7 @@
 #include <dt-bindings/clock/qcom,gcc-msm8960.h>
 #include <dt-bindings/reset/qcom,gcc-msm8960.h>
 #include <dt-bindings/clock/qcom,mmcc-msm8960.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/soc/qcom,gsbi.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -303,6 +304,9 @@
 	firmware {
 		scm {
 			compatible = "qcom,scm-apq8064";
+
+			clocks = <&rpmcc RPM_DAYTONA_FABRIC_CLK>;
+			clock-names = "core";
 		};
 	};
 

arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts

@@ -81,7 +81,7 @@
 		#address-cells = <0>;
 		interrupt-controller;
 		reg = <0 0x2c001000 0 0x1000>,
-		      <0 0x2c002000 0 0x1000>,
+		      <0 0x2c002000 0 0x2000>,
 		      <0 0x2c004000 0 0x2000>,
 		      <0 0x2c006000 0 0x2000>;
 		interrupts = <1 9 0xf04>;

arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts

@@ -131,7 +131,7 @@
 		#address-cells = <0>;
 		interrupt-controller;
 		reg = <0 0x2c001000 0 0x1000>,
-		      <0 0x2c002000 0 0x1000>,
+		      <0 0x2c002000 0 0x2000>,
 		      <0 0x2c004000 0 0x2000>,
 		      <0 0x2c006000 0 0x2000>;
 		interrupts = <1 9 0xf04>;

arch/arm/boot/dts/vf610-zii-dev-rev-b.dts

@@ -153,7 +153,8 @@
 					switch0phy1: switch1phy0@1 {
 						reg = <1>;
 						interrupt-parent = <&switch0>;
-						interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;					};
+						interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+					};
 					switch0phy2: switch1phy0@2 {
 						reg = <2>;
 						interrupt-parent = <&switch0>;

arch/arm/mach-davinci/clock.c

@@ -31,10 +31,10 @@ static LIST_HEAD(clocks);
 static DEFINE_MUTEX(clocks_mutex);
 static DEFINE_SPINLOCK(clockfw_lock);
 
-static void __clk_enable(struct clk *clk)
+void davinci_clk_enable(struct clk *clk)
 {
 	if (clk->parent)
-		__clk_enable(clk->parent);
+		davinci_clk_enable(clk->parent);
 	if (clk->usecount++ == 0) {
 		if (clk->flags & CLK_PSC)
 			davinci_psc_config(clk->domain, clk->gpsc, clk->lpsc,
@@ -44,7 +44,7 @@ static void __clk_enable(struct clk *clk)
 	}
 }
 
-static void __clk_disable(struct clk *clk)
+void davinci_clk_disable(struct clk *clk)
 {
 	if (WARN_ON(clk->usecount == 0))
 		return;
@@ -56,7 +56,7 @@ static void __clk_disable(struct clk *clk)
 			clk->clk_disable(clk);
 	}
 	if (clk->parent)
-		__clk_disable(clk->parent);
+		davinci_clk_disable(clk->parent);
 }
 
 int davinci_clk_reset(struct clk *clk, bool reset)
@@ -103,7 +103,7 @@ int clk_enable(struct clk *clk)
 		return -EINVAL;
 
 	spin_lock_irqsave(&clockfw_lock, flags);
-	__clk_enable(clk);
+	davinci_clk_enable(clk);
 	spin_unlock_irqrestore(&clockfw_lock, flags);
 
 	return 0;
@@ -118,7 +118,7 @@ void clk_disable(struct clk *clk)
 		return;
 
 	spin_lock_irqsave(&clockfw_lock, flags);
-	__clk_disable(clk);
+	davinci_clk_disable(clk);
 	spin_unlock_irqrestore(&clockfw_lock, flags);
 }
 EXPORT_SYMBOL(clk_disable);

arch/arm/mach-davinci/clock.h

@@ -132,6 +132,8 @@ int davinci_set_sysclk_rate(struct clk *clk, unsigned long rate);
 int davinci_set_refclk_rate(unsigned long rate);
 int davinci_simple_set_rate(struct clk *clk, unsigned long rate);
 int davinci_clk_reset(struct clk *clk, bool reset);
+void davinci_clk_enable(struct clk *clk);
+void davinci_clk_disable(struct clk *clk);
 
 extern struct platform_device davinci_wdt_device;
 extern void davinci_watchdog_reset(struct platform_device *);

arch/arm/mach-davinci/da850.c

@@ -319,6 +319,16 @@ static struct clk emac_clk = {
 	.gpsc		= 1,
 };
 
+/*
+ * In order to avoid adding the emac_clk to the clock lookup table twice (and
+ * screwing up the linked list in the process) create a separate clock for
+ * mdio inheriting the rate from emac_clk.
+ */
+static struct clk mdio_clk = {
+	.name		= "mdio",
+	.parent		= &emac_clk,
+};
+
 static struct clk mcasp_clk = {
 	.name		= "mcasp",
 	.parent		= &async3_clk,
@@ -367,6 +377,16 @@ static struct clk aemif_clk = {
 	.flags		= ALWAYS_ENABLED,
 };
 
+/*
+ * In order to avoid adding the aemif_clk to the clock lookup table twice (and
+ * screwing up the linked list in the process) create a separate clock for
+ * nand inheriting the rate from aemif_clk.
+ */
+static struct clk aemif_nand_clk = {
+	.name		= "nand",
+	.parent		= &aemif_clk,
+};
+
 static struct clk usb11_clk = {
 	.name		= "usb11",
 	.parent		= &pll0_sysclk4,
@@ -529,7 +549,7 @@ static struct clk_lookup da850_clks[] = {
 	CLK(NULL,		"arm",		&arm_clk),
 	CLK(NULL,		"rmii",		&rmii_clk),
 	CLK("davinci_emac.1",	NULL,		&emac_clk),
-	CLK("davinci_mdio.0",	"fck",		&emac_clk),
+	CLK("davinci_mdio.0",	"fck",		&mdio_clk),
 	CLK("davinci-mcasp.0",	NULL,		&mcasp_clk),
 	CLK("davinci-mcbsp.0",	NULL,		&mcbsp0_clk),
 	CLK("davinci-mcbsp.1",	NULL,		&mcbsp1_clk),
@@ -537,7 +557,15 @@ static struct clk_lookup da850_clks[] = {
 	CLK("da830-mmc.0",	NULL,		&mmcsd0_clk),
 	CLK("da830-mmc.1",	NULL,		&mmcsd1_clk),
 	CLK("ti-aemif",		NULL,		&aemif_clk),
-	CLK(NULL,		"aemif",	&aemif_clk),
+	/*
+	 * The only user of this clock is davinci_nand and it get's it through
+	 * con_id. The nand node itself is created from within the aemif
+	 * driver to guarantee that it's probed after the aemif timing
+	 * parameters are configured. of_dev_auxdata is not accessible from
+	 * the aemif driver and can't be passed to of_platform_populate(). For
+	 * that reason we're leaving the dev_id here as NULL.
+	 */
+	CLK(NULL,		"aemif",	&aemif_nand_clk),
 	CLK("ohci-da8xx",	"usb11",	&usb11_clk),
 	CLK("musb-da8xx",	"usb20",	&usb20_clk),
 	CLK("spi_davinci.0",	NULL,		&spi0_clk),

arch/arm/mach-davinci/usb-da8xx.c

@@ -22,6 +22,8 @@
 #define DA8XX_USB0_BASE		0x01e00000
 #define DA8XX_USB1_BASE		0x01e25000
 
+static struct clk *usb20_clk;
+
 static struct platform_device da8xx_usb_phy = {
 	.name		= "da8xx-usb-phy",
 	.id		= -1,
@@ -158,26 +160,13 @@ int __init da8xx_register_usb_refclkin(int rate)
 
 static void usb20_phy_clk_enable(struct clk *clk)
 {
-	struct clk *usb20_clk;
-	int err;
 	u32 val;
 	u32 timeout = 500000; /* 500 msec */
 
 	val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
 
-	usb20_clk = clk_get(&da8xx_usb20_dev.dev, "usb20");
-	if (IS_ERR(usb20_clk)) {
-		pr_err("could not get usb20 clk: %ld\n", PTR_ERR(usb20_clk));
-		return;
-	}
-
 	/* The USB 2.O PLL requires that the USB 2.O PSC is enabled as well. */
-	err = clk_prepare_enable(usb20_clk);
-	if (err) {
-		pr_err("failed to enable usb20 clk: %d\n", err);
-		clk_put(usb20_clk);
-		return;
-	}
+	davinci_clk_enable(usb20_clk);
 
 	/*
 	 * Turn on the USB 2.0 PHY, but just the PLL, and not OTG. The USB 1.1
@@ -197,8 +186,7 @@ static void usb20_phy_clk_enable(struct clk *clk)
 
 	pr_err("Timeout waiting for USB 2.0 PHY clock good\n");
 done:
-	clk_disable_unprepare(usb20_clk);
-	clk_put(usb20_clk);
+	davinci_clk_disable(usb20_clk);
 }
 
 static void usb20_phy_clk_disable(struct clk *clk)
@@ -285,11 +273,19 @@ static struct clk_lookup usb20_phy_clk_lookup =
 int __init da8xx_register_usb20_phy_clk(bool use_usb_refclkin)
 {
 	struct clk *parent;
-	int ret = 0;
+	int ret;
+
+	usb20_clk = clk_get(&da8xx_usb20_dev.dev, "usb20");
+	ret = PTR_ERR_OR_ZERO(usb20_clk);
+	if (ret)
+		return ret;
 
 	parent = clk_get(NULL, use_usb_refclkin ? "usb_refclkin" : "pll0_aux");
-	if (IS_ERR(parent))
-		return PTR_ERR(parent);
+	ret = PTR_ERR_OR_ZERO(parent);
+	if (ret) {
+		clk_put(usb20_clk);
+		return ret;
+	}
 
 	usb20_phy_clk.parent = parent;
 	ret = clk_register(&usb20_phy_clk);

arch/arm/mach-exynos/platsmp.c

@@ -385,36 +385,6 @@ fail:
 	return pen_release != -1 ? ret : 0;
 }
 
-/*
- * Initialise the CPU possible map early - this describes the CPUs
- * which may be present or become present in the system.
- */
-
-static void __init exynos_smp_init_cpus(void)
-{
-	void __iomem *scu_base = scu_base_addr();
-	unsigned int i, ncores;
-
-	if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
-		ncores = scu_base ? scu_get_core_count(scu_base) : 1;
-	else
-		/*
-		 * CPU Nodes are passed thru DT and set_cpu_possible
-		 * is set by "arm_dt_init_cpu_maps".
-		 */
-		return;
-
-	/* sanity check */
-	if (ncores > nr_cpu_ids) {
-		pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
-			ncores, nr_cpu_ids);
-		ncores = nr_cpu_ids;
-	}
-
-	for (i = 0; i < ncores; i++)
-		set_cpu_possible(i, true);
-}
-
 static void __init exynos_smp_prepare_cpus(unsigned int max_cpus)
 {
 	int i;
@@ -479,7 +449,6 @@ static void exynos_cpu_die(unsigned int cpu)
 #endif /* CONFIG_HOTPLUG_CPU */
 
 const struct smp_operations exynos_smp_ops __initconst = {
-	.smp_init_cpus		= exynos_smp_init_cpus,
 	.smp_prepare_cpus	= exynos_smp_prepare_cpus,
 	.smp_secondary_init	= exynos_secondary_init,
 	.smp_boot_secondary	= exynos_boot_secondary,

arch/arm/mach-imx/mach-imx1.c

@@ -37,7 +37,6 @@ static const char * const imx1_dt_board_compat[] __initconst = {
 };
 
 DT_MACHINE_START(IMX1_DT, "Freescale i.MX1 (Device Tree Support)")
-	.map_io		= debug_ll_io_init,
 	.init_early	= imx1_init_early,
 	.init_irq	= imx1_init_irq,
 	.dt_compat	= imx1_dt_board_compat,

arch/arm/mach-omap2/Makefile

@@ -7,7 +7,7 @@ ccflags-y := -I$(srctree)/$(src)/include \
 
 # Common support
 obj-y := id.o io.o control.o devices.o fb.o timer.o pm.o \
-	 common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \
+	 common.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \
 	 omap_device.o omap-headsmp.o sram.o drm.o
 
 hwmod-common				= omap_hwmod.o omap_hwmod_reset.o \

arch/arm/mach-omap2/board-generic.c

@@ -304,7 +304,7 @@ DT_MACHINE_START(AM43_DT, "Generic AM43 (Flattened Device Tree)")
 	.init_late	= am43xx_init_late,
 	.init_irq	= omap_gic_of_init,
 	.init_machine	= omap_generic_init,
-	.init_time	= omap4_local_timer_init,
+	.init_time	= omap3_gptimer_timer_init,
 	.dt_compat	= am43_boards_compat,
 	.restart	= omap44xx_restart,
 MACHINE_END

arch/arm/mach-omap2/gpio.c

@@ -1,160 +0,0 @@
-/*
- * OMAP2+ specific gpio initialization
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
- *
- * Author:
- *	Charulatha V <charu@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/gpio.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/of.h>
-#include <linux/platform_data/gpio-omap.h>
-
-#include "soc.h"
-#include "omap_hwmod.h"
-#include "omap_device.h"
-#include "omap-pm.h"
-
-#include "powerdomain.h"
-
-static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
-{
-	struct platform_device *pdev;
-	struct omap_gpio_platform_data *pdata;
-	struct omap_gpio_dev_attr *dev_attr;
-	char *name = "omap_gpio";
-	int id;
-	struct powerdomain *pwrdm;
-
-	/*
-	 * extract the device id from name field available in the
-	 * hwmod database and use the same for constructing ids for
-	 * gpio devices.
-	 * CAUTION: Make sure the name in the hwmod database does
-	 * not change. If changed, make corresponding change here
-	 * or make use of static variable mechanism to handle this.
-	 */
-	sscanf(oh->name, "gpio%d", &id);
-
-	pdata = kzalloc(sizeof(struct omap_gpio_platform_data), GFP_KERNEL);
-	if (!pdata) {
-		pr_err("gpio%d: Memory allocation failed\n", id);
-		return -ENOMEM;
-	}
-
-	dev_attr = (struct omap_gpio_dev_attr *)oh->dev_attr;
-	pdata->bank_width = dev_attr->bank_width;
-	pdata->dbck_flag = dev_attr->dbck_flag;
-	pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count;
-	pdata->regs = kzalloc(sizeof(struct omap_gpio_reg_offs), GFP_KERNEL);
-	if (!pdata->regs) {
-		pr_err("gpio%d: Memory allocation failed\n", id);
-		kfree(pdata);
-		return -ENOMEM;
-	}
-
-	switch (oh->class->rev) {
-	case 0:
-		if (id == 1)
-			/* non-wakeup GPIO pins for OMAP2 Bank1 */
-			pdata->non_wakeup_gpios = 0xe203ffc0;
-		else if (id == 2)
-			/* non-wakeup GPIO pins for OMAP2 Bank2 */
-			pdata->non_wakeup_gpios = 0x08700040;
-		/* fall through */
-
-	case 1:
-		pdata->regs->revision = OMAP24XX_GPIO_REVISION;
-		pdata->regs->direction = OMAP24XX_GPIO_OE;
-		pdata->regs->datain = OMAP24XX_GPIO_DATAIN;
-		pdata->regs->dataout = OMAP24XX_GPIO_DATAOUT;
-		pdata->regs->set_dataout = OMAP24XX_GPIO_SETDATAOUT;
-		pdata->regs->clr_dataout = OMAP24XX_GPIO_CLEARDATAOUT;
-		pdata->regs->irqstatus = OMAP24XX_GPIO_IRQSTATUS1;
-		pdata->regs->irqstatus2 = OMAP24XX_GPIO_IRQSTATUS2;
-		pdata->regs->irqenable = OMAP24XX_GPIO_IRQENABLE1;
-		pdata->regs->irqenable2 = OMAP24XX_GPIO_IRQENABLE2;
-		pdata->regs->set_irqenable = OMAP24XX_GPIO_SETIRQENABLE1;
-		pdata->regs->clr_irqenable = OMAP24XX_GPIO_CLEARIRQENABLE1;
-		pdata->regs->debounce = OMAP24XX_GPIO_DEBOUNCE_VAL;
-		pdata->regs->debounce_en = OMAP24XX_GPIO_DEBOUNCE_EN;
-		pdata->regs->ctrl = OMAP24XX_GPIO_CTRL;
-		pdata->regs->wkup_en = OMAP24XX_GPIO_WAKE_EN;
-		pdata->regs->leveldetect0 = OMAP24XX_GPIO_LEVELDETECT0;
-		pdata->regs->leveldetect1 = OMAP24XX_GPIO_LEVELDETECT1;
-		pdata->regs->risingdetect = OMAP24XX_GPIO_RISINGDETECT;
-		pdata->regs->fallingdetect = OMAP24XX_GPIO_FALLINGDETECT;
-		break;
-	case 2:
-		pdata->regs->revision = OMAP4_GPIO_REVISION;
-		pdata->regs->direction = OMAP4_GPIO_OE;
-		pdata->regs->datain = OMAP4_GPIO_DATAIN;
-		pdata->regs->dataout = OMAP4_GPIO_DATAOUT;
-		pdata->regs->set_dataout = OMAP4_GPIO_SETDATAOUT;
-		pdata->regs->clr_dataout = OMAP4_GPIO_CLEARDATAOUT;
-		pdata->regs->irqstatus_raw0 = OMAP4_GPIO_IRQSTATUSRAW0;
-		pdata->regs->irqstatus_raw1 = OMAP4_GPIO_IRQSTATUSRAW1;
-		pdata->regs->irqstatus = OMAP4_GPIO_IRQSTATUS0;
-		pdata->regs->irqstatus2 = OMAP4_GPIO_IRQSTATUS1;
-		pdata->regs->irqenable = OMAP4_GPIO_IRQSTATUSSET0;
-		pdata->regs->irqenable2 = OMAP4_GPIO_IRQSTATUSSET1;
-		pdata->regs->set_irqenable = OMAP4_GPIO_IRQSTATUSSET0;
-		pdata->regs->clr_irqenable = OMAP4_GPIO_IRQSTATUSCLR0;
-		pdata->regs->debounce = OMAP4_GPIO_DEBOUNCINGTIME;
-		pdata->regs->debounce_en = OMAP4_GPIO_DEBOUNCENABLE;
-		pdata->regs->ctrl = OMAP4_GPIO_CTRL;
-		pdata->regs->wkup_en = OMAP4_GPIO_IRQWAKEN0;
-		pdata->regs->leveldetect0 = OMAP4_GPIO_LEVELDETECT0;
-		pdata->regs->leveldetect1 = OMAP4_GPIO_LEVELDETECT1;
-		pdata->regs->risingdetect = OMAP4_GPIO_RISINGDETECT;
-		pdata->regs->fallingdetect = OMAP4_GPIO_FALLINGDETECT;
-		break;
-	default:
-		WARN(1, "Invalid gpio bank_type\n");
-		kfree(pdata->regs);
-		kfree(pdata);
-		return -EINVAL;
-	}
-
-	pwrdm = omap_hwmod_get_pwrdm(oh);
-	pdata->loses_context = pwrdm_can_ever_lose_context(pwrdm);
-
-	pdev = omap_device_build(name, id - 1, oh, pdata, sizeof(*pdata));
-	kfree(pdata);
-
-	if (IS_ERR(pdev)) {
-		WARN(1, "Can't build omap_device for %s:%s.\n",
-					name, oh->name);
-		return PTR_ERR(pdev);
-	}
-
-	return 0;
-}
-
-/*
- * gpio_init needs to be done before
- * machine_init functions access gpio APIs.
- * Hence gpio_init is a omap_postcore_initcall.
- */
-static int __init omap2_gpio_init(void)
-{
-	/* If dtb is there, the devices will be created dynamically */
-	if (of_have_populated_dt())
-		return -ENODEV;
-
-	return omap_hwmod_for_each_by_class("gpio", omap2_gpio_dev_init, NULL);
-}
-omap_postcore_initcall(omap2_gpio_init);

arch/arm/mach-omap2/omap_hwmod.c

@@ -741,14 +741,14 @@ static int _init_main_clk(struct omap_hwmod *oh)
 	int ret = 0;
 	char name[MOD_CLK_MAX_NAME_LEN];
 	struct clk *clk;
+	static const char modck[] = "_mod_ck";
 
-	/* +7 magic comes from '_mod_ck' suffix */
-	if (strlen(oh->name) + 7 > MOD_CLK_MAX_NAME_LEN)
+	if (strlen(oh->name) >= MOD_CLK_MAX_NAME_LEN - strlen(modck))
 		pr_warn("%s: warning: cropping name for %s\n", __func__,
 			oh->name);
 
-	strncpy(name, oh->name, MOD_CLK_MAX_NAME_LEN - 7);
-	strcat(name, "_mod_ck");
+	strlcpy(name, oh->name, MOD_CLK_MAX_NAME_LEN - strlen(modck));
+	strlcat(name, modck, MOD_CLK_MAX_NAME_LEN);
 
 	clk = clk_get(NULL, name);
 	if (!IS_ERR(clk)) {

arch/arm/mach-omap2/omap_hwmod_common_data.h

@@ -121,10 +121,6 @@ extern struct omap_hwmod_irq_info omap2_uart3_mpu_irqs[];
 extern struct omap_hwmod_irq_info omap2_dispc_irqs[];
 extern struct omap_hwmod_irq_info omap2_i2c1_mpu_irqs[];
 extern struct omap_hwmod_irq_info omap2_i2c2_mpu_irqs[];
-extern struct omap_hwmod_irq_info omap2_gpio1_irqs[];
-extern struct omap_hwmod_irq_info omap2_gpio2_irqs[];
-extern struct omap_hwmod_irq_info omap2_gpio3_irqs[];
-extern struct omap_hwmod_irq_info omap2_gpio4_irqs[];
 extern struct omap_hwmod_irq_info omap2_dma_system_irqs[];
 extern struct omap_hwmod_irq_info omap2_mcspi1_mpu_irqs[];
 extern struct omap_hwmod_irq_info omap2_mcspi2_mpu_irqs[];

arch/arm/mach-omap2/prm_common.c

@@ -295,10 +295,8 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup)
 		GFP_KERNEL);
 
 	if (!prcm_irq_chips || !prcm_irq_setup->saved_mask ||
-	    !prcm_irq_setup->priority_mask) {
-		pr_err("PRCM: kzalloc failed\n");
+	    !prcm_irq_setup->priority_mask)
 		goto err;
-	}
 
 	memset(mask, 0, sizeof(mask));
 

arch/arm/mach-omap2/timer.c

@@ -510,18 +510,19 @@ void __init omap3_secure_sync32k_timer_init(void)
 }
 #endif /* CONFIG_ARCH_OMAP3 */
 
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX)
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX) || \
+	defined(CONFIG_SOC_AM43XX)
 void __init omap3_gptimer_timer_init(void)
 {
 	__omap_sync32k_timer_init(2, "timer_sys_ck", NULL,
 			1, "timer_sys_ck", "ti,timer-alwon", true);
-
-	clocksource_probe();
+	if (of_have_populated_dt())
+		clocksource_probe();
 }
 #endif
 
 #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) ||		\
-	defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM43XX)
+	defined(CONFIG_SOC_DRA7XX)
 static void __init omap4_sync32k_timer_init(void)
 {
 	__omap_sync32k_timer_init(1, "timer_32k_ck", "ti,timer-alwon",

arch/arm/mach-s3c24xx/common.c

@@ -345,10 +345,40 @@ static struct s3c24xx_dma_channel s3c2410_dma_channels[DMACH_MAX] = {
 	[DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 3), },
 };
 
+static const struct dma_slave_map s3c2410_dma_slave_map[] = {
+	{ "s3c2410-sdi", "rx-tx", (void *)DMACH_SDI },
+	{ "s3c2410-spi.0", "rx", (void *)DMACH_SPI0_RX },
+	{ "s3c2410-spi.0", "tx", (void *)DMACH_SPI0_TX },
+	{ "s3c2410-spi.1", "rx", (void *)DMACH_SPI1_RX },
+	{ "s3c2410-spi.1", "tx", (void *)DMACH_SPI1_TX },
+	/*
+	 * The DMA request source[1] (DMACH_UARTx_SRC2) are
+	 * not used in the UART driver.
+	 */
+	{ "s3c2410-uart.0", "rx", (void *)DMACH_UART0 },
+	{ "s3c2410-uart.0", "tx", (void *)DMACH_UART0 },
+	{ "s3c2410-uart.1", "rx", (void *)DMACH_UART1 },
+	{ "s3c2410-uart.1", "tx", (void *)DMACH_UART1 },
+	{ "s3c2410-uart.2", "rx", (void *)DMACH_UART2 },
+	{ "s3c2410-uart.2", "tx", (void *)DMACH_UART2 },
+	{ "s3c24xx-iis", "rx", (void *)DMACH_I2S_IN },
+	{ "s3c24xx-iis", "tx", (void *)DMACH_I2S_OUT },
+	{ "s3c-hsudc", "rx0", (void *)DMACH_USB_EP1 },
+	{ "s3c-hsudc", "tx0", (void *)DMACH_USB_EP1 },
+	{ "s3c-hsudc", "rx1", (void *)DMACH_USB_EP2 },
+	{ "s3c-hsudc", "tx1", (void *)DMACH_USB_EP2 },
+	{ "s3c-hsudc", "rx2", (void *)DMACH_USB_EP3 },
+	{ "s3c-hsudc", "tx2", (void *)DMACH_USB_EP3 },
+	{ "s3c-hsudc", "rx3", (void *)DMACH_USB_EP4 },
+	{ "s3c-hsudc", "tx3", (void *)DMACH_USB_EP4 }
+};
+
 static struct s3c24xx_dma_platdata s3c2410_dma_platdata = {
 	.num_phy_channels = 4,
 	.channels = s3c2410_dma_channels,
 	.num_channels = DMACH_MAX,
+	.slave_map = s3c2410_dma_slave_map,
+	.slavecnt = ARRAY_SIZE(s3c2410_dma_slave_map),
 };
 
 struct platform_device s3c2410_device_dma = {
@@ -388,10 +418,36 @@ static struct s3c24xx_dma_channel s3c2412_dma_channels[DMACH_MAX] = {
 	[DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, 16 },
 };
 
+static const struct dma_slave_map s3c2412_dma_slave_map[] = {
+	{ "s3c2412-sdi", "rx-tx", (void *)DMACH_SDI },
+	{ "s3c2412-spi.0", "rx", (void *)DMACH_SPI0_RX },
+	{ "s3c2412-spi.0", "tx", (void *)DMACH_SPI0_TX },
+	{ "s3c2412-spi.1", "rx", (void *)DMACH_SPI1_RX },
+	{ "s3c2412-spi.1", "tx", (void *)DMACH_SPI1_TX },
+	{ "s3c2440-uart.0", "rx", (void *)DMACH_UART0 },
+	{ "s3c2440-uart.0", "tx", (void *)DMACH_UART0 },
+	{ "s3c2440-uart.1", "rx", (void *)DMACH_UART1 },
+	{ "s3c2440-uart.1", "tx", (void *)DMACH_UART1 },
+	{ "s3c2440-uart.2", "rx", (void *)DMACH_UART2 },
+	{ "s3c2440-uart.2", "tx", (void *)DMACH_UART2 },
+	{ "s3c2412-iis", "rx", (void *)DMACH_I2S_IN },
+	{ "s3c2412-iis", "tx", (void *)DMACH_I2S_OUT },
+	{ "s3c-hsudc", "rx0", (void *)DMACH_USB_EP1 },
+	{ "s3c-hsudc", "tx0", (void *)DMACH_USB_EP1 },
+	{ "s3c-hsudc", "rx1", (void *)DMACH_USB_EP2 },
+	{ "s3c-hsudc", "tx1", (void *)DMACH_USB_EP2 },
+	{ "s3c-hsudc", "rx2", (void *)DMACH_USB_EP3 },
+	{ "s3c-hsudc", "tx2", (void *)DMACH_USB_EP3 },
+	{ "s3c-hsudc", "rx3", (void *)DMACH_USB_EP4 },
+	{ "s3c-hsudc", "tx3", (void *)DMACH_USB_EP4 }
+};
+
 static struct s3c24xx_dma_platdata s3c2412_dma_platdata = {
 	.num_phy_channels = 4,
 	.channels = s3c2412_dma_channels,
 	.num_channels = DMACH_MAX,
+	.slave_map = s3c2412_dma_slave_map,
+	.slavecnt = ARRAY_SIZE(s3c2412_dma_slave_map),
 };
 
 struct platform_device s3c2412_device_dma = {
@@ -534,10 +590,30 @@ static struct s3c24xx_dma_channel s3c2443_dma_channels[DMACH_MAX] = {
 	[DMACH_MIC_IN] = { S3C24XX_DMA_APB, true, 29 },
 };
 
+static const struct dma_slave_map s3c2443_dma_slave_map[] = {
+	{ "s3c2440-sdi", "rx-tx", (void *)DMACH_SDI },
+	{ "s3c2443-spi.0", "rx", (void *)DMACH_SPI0_RX },
+	{ "s3c2443-spi.0", "tx", (void *)DMACH_SPI0_TX },
+	{ "s3c2443-spi.1", "rx", (void *)DMACH_SPI1_RX },
+	{ "s3c2443-spi.1", "tx", (void *)DMACH_SPI1_TX },
+	{ "s3c2440-uart.0", "rx", (void *)DMACH_UART0 },
+	{ "s3c2440-uart.0", "tx", (void *)DMACH_UART0 },
+	{ "s3c2440-uart.1", "rx", (void *)DMACH_UART1 },
+	{ "s3c2440-uart.1", "tx", (void *)DMACH_UART1 },
+	{ "s3c2440-uart.2", "rx", (void *)DMACH_UART2 },
+	{ "s3c2440-uart.2", "tx", (void *)DMACH_UART2 },
+	{ "s3c2440-uart.3", "rx", (void *)DMACH_UART3 },
+	{ "s3c2440-uart.3", "tx", (void *)DMACH_UART3 },
+	{ "s3c24xx-iis", "rx", (void *)DMACH_I2S_IN },
+	{ "s3c24xx-iis", "tx", (void *)DMACH_I2S_OUT },
+};
+
 static struct s3c24xx_dma_platdata s3c2443_dma_platdata = {
 	.num_phy_channels = 6,
 	.channels = s3c2443_dma_channels,
 	.num_channels = DMACH_MAX,
+	.slave_map = s3c2443_dma_slave_map,
+	.slavecnt = ARRAY_SIZE(s3c2443_dma_slave_map),
 };
 
 struct platform_device s3c2443_device_dma = {

arch/arm64/boot/dts/amlogic/meson-gx.dtsi

@@ -356,5 +356,21 @@
 				status = "disabled";
 			};
 		};
+
+		vpu: vpu@d0100000 {
+			compatible = "amlogic,meson-gx-vpu";
+			reg = <0x0 0xd0100000 0x0 0x100000>,
+			      <0x0 0xc883c000 0x0 0x1000>,
+			      <0x0 0xc8838000 0x0 0x1000>;
+			reg-names = "vpu", "hhi", "dmc";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* CVBS VDAC output port */
+			cvbs_vdac_port: port@0 {
+				reg = <0>;
+			};
+		};
 	};
 };

arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts

@@ -142,6 +142,16 @@
 		clocks = <&wifi32k>;
 		clock-names = "ext_clock";
 	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
 };
 
 &uart_AO {
@@ -229,3 +239,9 @@
 	clocks = <&clkc CLKID_FCLK_DIV4>;
 	clock-names = "clkin0";
 };
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};

arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi

@@ -125,6 +125,16 @@
 		clocks = <&wifi32k>;
 		clock-names = "ext_clock";
 	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
 };
 
 /* This UART is brought out to the DB9 connector */
@@ -234,3 +244,9 @@
 	clocks = <&clkc CLKID_FCLK_DIV4>;
 	clock-names = "clkin0";
 };
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};

arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi

@@ -506,3 +506,7 @@
 		 <&clkc CLKID_FCLK_DIV2>;
 	clock-names = "core", "clkin0", "clkin1";
 };
+
+&vpu {
+	compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
+};

arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts

@@ -117,6 +117,16 @@
 		clocks = <&wifi32k>;
 		clock-names = "ext_clock";
 	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
 };
 
 &uart_AO {
@@ -203,3 +213,9 @@
 	clocks = <&clkc CLKID_FCLK_DIV4>;
 	clock-names = "clkin0";
 };
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};

arch/arm64/boot/dts/amlogic/meson-gxl.dtsi

@@ -43,7 +43,7 @@
 
 #include "meson-gx.dtsi"
 #include <dt-bindings/clock/gxbb-clkc.h>
-#include <dt-bindings/gpio/meson-gxbb-gpio.h>
+#include <dt-bindings/gpio/meson-gxl-gpio.h>
 
 / {
 	compatible = "amlogic,meson-gxl";
@@ -299,3 +299,7 @@
 		 <&clkc CLKID_FCLK_DIV2>;
 	clock-names = "core", "clkin0", "clkin1";
 };
+
+&vpu {
+	compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu";
+};

arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts

@@ -90,6 +90,16 @@
 		compatible = "mmc-pwrseq-emmc";
 		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
 	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
 };
 
 /* This UART is brought out to the DB9 connector */
@@ -167,3 +177,9 @@
 		max-speed = <1000>;
 	};
 };
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};

arch/arm64/boot/dts/amlogic/meson-gxm.dtsi

@@ -112,3 +112,7 @@
 		};
 	};
 };
+
+&vpu {
+	compatible = "amlogic,meson-gxm-vpu", "amlogic,meson-gx-vpu";
+};

arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts

@@ -81,7 +81,7 @@
 		#address-cells = <0>;
 		interrupt-controller;
 		reg = <0x0 0x2c001000 0 0x1000>,
-		      <0x0 0x2c002000 0 0x1000>,
+		      <0x0 0x2c002000 0 0x2000>,
 		      <0x0 0x2c004000 0 0x2000>,
 		      <0x0 0x2c006000 0 0x2000>;
 		interrupts = <1 9 0xf04>;

arch/arm64/boot/dts/qcom/msm8996.dtsi

@@ -64,6 +64,16 @@
 			reg = <0x0 0x86000000 0x0 0x200000>;
 			no-map;
 		};
+
+		memory@85800000 {
+			reg = <0x0 0x85800000 0x0 0x800000>;
+			no-map;
+		};
+
+		memory@86200000 {
+			reg = <0x0 0x86200000 0x0 0x2600000>;
+			no-map;
+		};
 	};
 
 	cpus {

arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts

@@ -169,7 +169,7 @@
 		power-source = <3300>;
 	};
 
-	sdhi0_pins_uhs: sd0 {
+	sdhi0_pins_uhs: sd0_uhs {
 		groups = "sdhi0_data4", "sdhi0_ctrl";
 		function = "sdhi0";
 		power-source = <1800>;

arch/arm64/configs/defconfig

@@ -331,6 +331,7 @@ CONFIG_DRM_VC4=m
 CONFIG_DRM_PANEL_SIMPLE=m
 CONFIG_DRM_I2C_ADV7511=m
 CONFIG_DRM_HISI_KIRIN=m
+CONFIG_DRM_MESON=m
 CONFIG_FB=y
 CONFIG_FB_ARMCLCD=y
 CONFIG_BACKLIGHT_GENERIC=m

arch/arm64/include/asm/current.h

@@ -9,9 +9,17 @@
 
 struct task_struct;
 
+/*
+ * We don't use read_sysreg() as we want the compiler to cache the value where
+ * possible.
+ */
 static __always_inline struct task_struct *get_current(void)
 {
-	return (struct task_struct *)read_sysreg(sp_el0);
+	unsigned long sp_el0;
+
+	asm ("mrs %0, sp_el0" : "=r" (sp_el0));
+
+	return (struct task_struct *)sp_el0;
 }
 
 #define current get_current()

arch/arm64/mm/dma-mapping.c

@@ -524,7 +524,8 @@ EXPORT_SYMBOL(dummy_dma_ops);
 
 static int __init arm64_dma_init(void)
 {
-	if (swiotlb_force || max_pfn > (arm64_dma_phys_limit >> PAGE_SHIFT))
+	if (swiotlb_force == SWIOTLB_FORCE ||
+	    max_pfn > (arm64_dma_phys_limit >> PAGE_SHIFT))
 		swiotlb = 1;
 
 	return atomic_pool_init();

arch/arm64/mm/fault.c

@@ -88,21 +88,21 @@ void show_pte(struct mm_struct *mm, unsigned long addr)
 			break;
 
 		pud = pud_offset(pgd, addr);
-		printk(", *pud=%016llx", pud_val(*pud));
+		pr_cont(", *pud=%016llx", pud_val(*pud));
 		if (pud_none(*pud) || pud_bad(*pud))
 			break;
 
 		pmd = pmd_offset(pud, addr);
-		printk(", *pmd=%016llx", pmd_val(*pmd));
+		pr_cont(", *pmd=%016llx", pmd_val(*pmd));
 		if (pmd_none(*pmd) || pmd_bad(*pmd))
 			break;
 
 		pte = pte_offset_map(pmd, addr);
-		printk(", *pte=%016llx", pte_val(*pte));
+		pr_cont(", *pte=%016llx", pte_val(*pte));
 		pte_unmap(pte);
 	} while(0);
 
-	printk("\n");
+	pr_cont("\n");
 }
 
 #ifdef CONFIG_ARM64_HW_AFDBM

arch/arm64/mm/init.c

@@ -401,7 +401,8 @@ static void __init free_unused_memmap(void)
  */
 void __init mem_init(void)
 {
-	if (swiotlb_force || max_pfn > (arm64_dma_phys_limit >> PAGE_SHIFT))
+	if (swiotlb_force == SWIOTLB_FORCE ||
+	    max_pfn > (arm64_dma_phys_limit >> PAGE_SHIFT))
 		swiotlb_init(1);
 
 	set_max_mapnr(pfn_to_page(max_pfn) - mem_map);

arch/blackfin/include/asm/vga.h

@@ -0,0 +1 @@
+#include <asm-generic/vga.h>

arch/mips/kvm/entry.c

@@ -521,6 +521,9 @@ void *kvm_mips_build_exit(void *addr)
 	uasm_i_and(&p, V0, V0, AT);
 	uasm_i_lui(&p, AT, ST0_CU0 >> 16);
 	uasm_i_or(&p, V0, V0, AT);
+#ifdef CONFIG_64BIT
+	uasm_i_ori(&p, V0, V0, ST0_SX | ST0_UX);
+#endif
 	uasm_i_mtc0(&p, V0, C0_STATUS);
 	uasm_i_ehb(&p);
 
@@ -643,7 +646,7 @@ static void *kvm_mips_build_ret_to_guest(void *addr)
 
 	/* Setup status register for running guest in UM */
 	uasm_i_ori(&p, V1, V1, ST0_EXL | KSU_USER | ST0_IE);
-	UASM_i_LA(&p, AT, ~(ST0_CU0 | ST0_MX));
+	UASM_i_LA(&p, AT, ~(ST0_CU0 | ST0_MX | ST0_SX | ST0_UX));
 	uasm_i_and(&p, V1, V1, AT);
 	uasm_i_mtc0(&p, V1, C0_STATUS);
 	uasm_i_ehb(&p);

arch/mips/kvm/mips.c

@@ -360,8 +360,8 @@ struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, unsigned int id)
 	dump_handler("kvm_exit", gebase + 0x2000, vcpu->arch.vcpu_run);
 
 	/* Invalidate the icache for these ranges */
-	local_flush_icache_range((unsigned long)gebase,
-				(unsigned long)gebase + ALIGN(size, PAGE_SIZE));
+	flush_icache_range((unsigned long)gebase,
+			   (unsigned long)gebase + ALIGN(size, PAGE_SIZE));
 
 	/*
 	 * Allocate comm page for guest kernel, a TLB will be reserved for

arch/openrisc/kernel/vmlinux.lds.S

@@ -44,6 +44,8 @@ SECTIONS
         /* Read-only sections, merged into text segment: */
         . = LOAD_BASE ;
 
+	_text = .;
+
 	/* _s_kernel_ro must be page aligned */
 	. = ALIGN(PAGE_SIZE);
 	_s_kernel_ro = .;

arch/parisc/include/asm/thread_info.h

@@ -49,7 +49,6 @@ struct thread_info {
 #define TIF_POLLING_NRFLAG	3	/* true if poll_idle() is polling TIF_NEED_RESCHED */
 #define TIF_32BIT               4       /* 32 bit binary */
 #define TIF_MEMDIE		5	/* is terminating due to OOM killer */
-#define TIF_RESTORE_SIGMASK	6	/* restore saved signal mask */
 #define TIF_SYSCALL_AUDIT	7	/* syscall auditing active */
 #define TIF_NOTIFY_RESUME	8	/* callback before returning to user */
 #define TIF_SINGLESTEP		9	/* single stepping? */

arch/parisc/kernel/time.c

@@ -235,9 +235,26 @@ void __init time_init(void)
 
 	cr16_hz = 100 * PAGE0->mem_10msec;  /* Hz */
 
-	/* register at clocksource framework */
-	clocksource_register_hz(&clocksource_cr16, cr16_hz);
-
 	/* register as sched_clock source */
 	sched_clock_register(read_cr16_sched_clock, BITS_PER_LONG, cr16_hz);
 }
+
+static int __init init_cr16_clocksource(void)
+{
+	/*
+	 * The cr16 interval timers are not syncronized across CPUs, so mark
+	 * them unstable and lower rating on SMP systems.
+	 */
+	if (num_online_cpus() > 1) {
+		clocksource_cr16.flags = CLOCK_SOURCE_UNSTABLE;
+		clocksource_cr16.rating = 0;
+	}
+
+	/* register at clocksource framework */
+	clocksource_register_hz(&clocksource_cr16,
+		100 * PAGE0->mem_10msec);
+
+	return 0;
+}
+
+device_initcall(init_cr16_clocksource);

arch/parisc/mm/fault.c

@@ -234,7 +234,7 @@ show_signal_msg(struct pt_regs *regs, unsigned long code,
 	    tsk->comm, code, address);
 	print_vma_addr(KERN_CONT " in ", regs->iaoq[0]);
 
-	pr_cont(" trap #%lu: %s%c", code, trap_name(code),
+	pr_cont("\ntrap #%lu: %s%c", code, trap_name(code),
 		vma ? ',':'\n');
 
 	if (vma)

arch/s390/include/asm/asm-prototypes.h

@@ -0,0 +1,8 @@
+#ifndef _ASM_S390_PROTOTYPES_H
+
+#include <linux/kvm_host.h>
+#include <linux/ftrace.h>
+#include <asm/fpu/api.h>
+#include <asm-generic/asm-prototypes.h>
+
+#endif /* _ASM_S390_PROTOTYPES_H */

arch/s390/kernel/vtime.c

@@ -94,7 +94,7 @@ static void update_mt_scaling(void)
  * Update process times based on virtual cpu times stored by entry.S
  * to the lowcore fields user_timer, system_timer & steal_clock.
  */
-static int do_account_vtime(struct task_struct *tsk, int hardirq_offset)
+static int do_account_vtime(struct task_struct *tsk)
 {
 	u64 timer, clock, user, system, steal;
 	u64 user_scaled, system_scaled;
@@ -138,7 +138,7 @@ static int do_account_vtime(struct task_struct *tsk, int hardirq_offset)
 	}
 	account_user_time(tsk, user);
 	tsk->utimescaled += user_scaled;
-	account_system_time(tsk, hardirq_offset, system);
+	account_system_time(tsk, 0, system);
 	tsk->stimescaled += system_scaled;
 
 	steal = S390_lowcore.steal_timer;
@@ -152,7 +152,7 @@ static int do_account_vtime(struct task_struct *tsk, int hardirq_offset)
 
 void vtime_task_switch(struct task_struct *prev)
 {
-	do_account_vtime(prev, 0);
+	do_account_vtime(prev);
 	prev->thread.user_timer = S390_lowcore.user_timer;
 	prev->thread.system_timer = S390_lowcore.system_timer;
 	S390_lowcore.user_timer = current->thread.user_timer;
@@ -166,7 +166,7 @@ void vtime_task_switch(struct task_struct *prev)
  */
 void vtime_account_user(struct task_struct *tsk)
 {
-	if (do_account_vtime(tsk, HARDIRQ_OFFSET))
+	if (do_account_vtime(tsk))
 		virt_timer_expire();
 }
 

arch/x86/kernel/pci-swiotlb.c

@@ -68,12 +68,10 @@ static struct dma_map_ops swiotlb_dma_ops = {
  */
 int __init pci_swiotlb_detect_override(void)
 {
-	int use_swiotlb = swiotlb | swiotlb_force;
-
-	if (swiotlb_force)
+	if (swiotlb_force == SWIOTLB_FORCE)
 		swiotlb = 1;
 
-	return use_swiotlb;
+	return swiotlb;
 }
 IOMMU_INIT_FINISH(pci_swiotlb_detect_override,
 		  pci_xen_swiotlb_detect,

arch/x86/kvm/vmx.c

@@ -132,12 +132,6 @@ module_param_named(preemption_timer, enable_preemption_timer, bool, S_IRUGO);
 
 #define VMX_MISC_EMULATED_PREEMPTION_TIMER_RATE 5
 
-#define VMX_VPID_EXTENT_SUPPORTED_MASK		\
-	(VMX_VPID_EXTENT_INDIVIDUAL_ADDR_BIT |	\
-	VMX_VPID_EXTENT_SINGLE_CONTEXT_BIT |	\
-	VMX_VPID_EXTENT_GLOBAL_CONTEXT_BIT |	\
-	VMX_VPID_EXTENT_SINGLE_NON_GLOBAL_BIT)
-
 /*
  * Hyper-V requires all of these, so mark them as supported even though
  * they are just treated the same as all-context.
@@ -10473,12 +10467,12 @@ static int nested_vmx_run(struct kvm_vcpu *vcpu, bool launch)
 	    !nested_guest_cr4_valid(vcpu, vmcs12->guest_cr4)) {
 		nested_vmx_entry_failure(vcpu, vmcs12,
 			EXIT_REASON_INVALID_STATE, ENTRY_FAIL_DEFAULT);
-		goto out;
+		return 1;
 	}
 	if (vmcs12->vmcs_link_pointer != -1ull) {
 		nested_vmx_entry_failure(vcpu, vmcs12,
 			EXIT_REASON_INVALID_STATE, ENTRY_FAIL_VMCS_LINK_PTR);
-		goto out;
+		return 1;
 	}
 
 	/*
@@ -10498,7 +10492,7 @@ static int nested_vmx_run(struct kvm_vcpu *vcpu, bool launch)
 		     ia32e != !!(vmcs12->guest_ia32_efer & EFER_LME))) {
 			nested_vmx_entry_failure(vcpu, vmcs12,
 				EXIT_REASON_INVALID_STATE, ENTRY_FAIL_DEFAULT);
-			goto out;
+			return 1;
 		}
 	}
 
@@ -10516,7 +10510,7 @@ static int nested_vmx_run(struct kvm_vcpu *vcpu, bool launch)
 		    ia32e != !!(vmcs12->host_ia32_efer & EFER_LME)) {
 			nested_vmx_entry_failure(vcpu, vmcs12,
 				EXIT_REASON_INVALID_STATE, ENTRY_FAIL_DEFAULT);
-			goto out;
+			return 1;
 		}
 	}
 

arch/x86/kvm/x86.c

@@ -3070,6 +3070,8 @@ static void kvm_vcpu_ioctl_x86_get_vcpu_events(struct kvm_vcpu *vcpu,
 	memset(&events->reserved, 0, sizeof(events->reserved));
 }
 
+static void kvm_set_hflags(struct kvm_vcpu *vcpu, unsigned emul_flags);
+
 static int kvm_vcpu_ioctl_x86_set_vcpu_events(struct kvm_vcpu *vcpu,
 					      struct kvm_vcpu_events *events)
 {
@@ -3106,10 +3108,13 @@ static int kvm_vcpu_ioctl_x86_set_vcpu_events(struct kvm_vcpu *vcpu,
 		vcpu->arch.apic->sipi_vector = events->sipi_vector;
 
 	if (events->flags & KVM_VCPUEVENT_VALID_SMM) {
+		u32 hflags = vcpu->arch.hflags;
 		if (events->smi.smm)
-			vcpu->arch.hflags |= HF_SMM_MASK;
+			hflags |= HF_SMM_MASK;
 		else
-			vcpu->arch.hflags &= ~HF_SMM_MASK;
+			hflags &= ~HF_SMM_MASK;
+		kvm_set_hflags(vcpu, hflags);
+
 		vcpu->arch.smi_pending = events->smi.pending;
 		if (events->smi.smm_inside_nmi)
 			vcpu->arch.hflags |= HF_SMM_INSIDE_NMI_MASK;

arch/x86/xen/pci-swiotlb-xen.c

@@ -48,7 +48,7 @@ int __init pci_xen_swiotlb_detect(void)
 	 * activate this IOMMU. If running as PV privileged, activate it
 	 * irregardless.
 	 */
-	if ((xen_initial_domain() || swiotlb || swiotlb_force))
+	if (xen_initial_domain() || swiotlb || swiotlb_force == SWIOTLB_FORCE)
 		xen_swiotlb = 1;
 
 	/* If we are running under Xen, we MUST disable the native SWIOTLB.

arch/x86/xen/setup.c

@@ -713,10 +713,9 @@ static void __init xen_reserve_xen_mfnlist(void)
 		size = PFN_PHYS(xen_start_info->nr_p2m_frames);
 	}
 
-	if (!xen_is_e820_reserved(start, size)) {
-		memblock_reserve(start, size);
+	memblock_reserve(start, size);
+	if (!xen_is_e820_reserved(start, size))
 		return;
-	}
 
 #ifdef CONFIG_X86_32
 	/*
@@ -727,6 +726,7 @@ static void __init xen_reserve_xen_mfnlist(void)
 	BUG();
 #else
 	xen_relocate_p2m();
+	memblock_free(start, size);
 #endif
 }
 

block/blk-wbt.c

@@ -544,6 +544,8 @@ static inline bool may_queue(struct rq_wb *rwb, struct rq_wait *rqw,
  * the timer to kick off queuing again.
  */
 static void __wbt_wait(struct rq_wb *rwb, unsigned long rw, spinlock_t *lock)
+	__releases(lock)
+	__acquires(lock)
 {
 	struct rq_wait *rqw = get_rq_wait(rwb, current_is_kswapd());
 	DEFINE_WAIT(wait);
@@ -558,13 +560,12 @@ static void __wbt_wait(struct rq_wb *rwb, unsigned long rw, spinlock_t *lock)
 		if (may_queue(rwb, rqw, &wait, rw))
 			break;
 
-		if (lock)
+		if (lock) {
 			spin_unlock_irq(lock);
-
-		io_schedule();
-
-		if (lock)
+			io_schedule();
 			spin_lock_irq(lock);
+		} else
+			io_schedule();
 	} while (1);
 
 	finish_wait(&rqw->wait, &wait);
@@ -595,7 +596,7 @@ static inline bool wbt_should_throttle(struct rq_wb *rwb, struct bio *bio)
  * in an irq held spinlock, if it holds one when calling this function.
  * If we do sleep, we'll release and re-grab it.
  */
-unsigned int wbt_wait(struct rq_wb *rwb, struct bio *bio, spinlock_t *lock)
+enum wbt_flags wbt_wait(struct rq_wb *rwb, struct bio *bio, spinlock_t *lock)
 {
 	unsigned int ret = 0;
 

drivers/acpi/acpi_watchdog.c

@@ -114,7 +114,7 @@ void __init acpi_watchdog_init(void)
 	pdev = platform_device_register_simple("wdat_wdt", PLATFORM_DEVID_NONE,
 					       resources, nresources);
 	if (IS_ERR(pdev))
-		pr_err("Failed to create platform device\n");
+		pr_err("Device creation failed: %ld\n", PTR_ERR(pdev));
 
 	kfree(resources);
 

drivers/acpi/glue.c

@@ -98,7 +98,15 @@ static int find_child_checks(struct acpi_device *adev, bool check_children)
 	if (check_children && list_empty(&adev->children))
 		return -ENODEV;
 
-	return sta_present ? FIND_CHILD_MAX_SCORE : FIND_CHILD_MIN_SCORE;
+	/*
+	 * If the device has a _HID (or _CID) returning a valid ACPI/PNP
+	 * device ID, it is better to make it look less attractive here, so that
+	 * the other device with the same _ADR value (that may not have a valid
+	 * device ID) can be matched going forward.  [This means a second spec
+	 * violation in a row, so whatever we do here is best effort anyway.]
+	 */
+	return sta_present && list_empty(&adev->pnp.ids) ?
+			FIND_CHILD_MAX_SCORE : FIND_CHILD_MIN_SCORE;
 }
 
 struct acpi_device *acpi_find_child_device(struct acpi_device *parent,
@@ -250,7 +258,6 @@ int acpi_bind_one(struct device *dev, struct acpi_device *acpi_dev)
 	return 0;
 
  err:
-	acpi_dma_deconfigure(dev);
 	ACPI_COMPANION_SET(dev, NULL);
 	put_device(dev);
 	put_device(&acpi_dev->dev);

drivers/acpi/internal.h

@@ -37,6 +37,7 @@ void acpi_amba_init(void);
 static inline void acpi_amba_init(void) {}
 #endif
 int acpi_sysfs_init(void);
+void acpi_gpe_apply_masked_gpes(void);
 void acpi_container_init(void);
 void acpi_memory_hotplug_init(void);
 #ifdef	CONFIG_ACPI_HOTPLUG_IOAPIC

drivers/acpi/scan.c

@@ -2074,6 +2074,7 @@ int __init acpi_scan_init(void)
 		}
 	}
 
+	acpi_gpe_apply_masked_gpes();
 	acpi_update_all_gpes();
 	acpi_ec_ecdt_start();
 

drivers/acpi/sysfs.c

@@ -708,6 +708,62 @@ end:
 	return result ? result : size;
 }
 
+/*
+ * A Quirk Mechanism for GPE Flooding Prevention:
+ *
+ * Quirks may be needed to prevent GPE flooding on a specific GPE. The
+ * flooding typically cannot be detected and automatically prevented by
+ * ACPI_GPE_DISPATCH_NONE check because there is a _Lxx/_Exx prepared in
+ * the AML tables. This normally indicates a feature gap in Linux, thus
+ * instead of providing endless quirk tables, we provide a boot parameter
+ * for those who want this quirk. For example, if the users want to prevent
+ * the GPE flooding for GPE 00, they need to specify the following boot
+ * parameter:
+ *   acpi_mask_gpe=0x00
+ * The masking status can be modified by the following runtime controlling
+ * interface:
+ *   echo unmask > /sys/firmware/acpi/interrupts/gpe00
+ */
+
+/*
+ * Currently, the GPE flooding prevention only supports to mask the GPEs
+ * numbered from 00 to 7f.
+ */
+#define ACPI_MASKABLE_GPE_MAX	0x80
+
+static u64 __initdata acpi_masked_gpes;
+
+static int __init acpi_gpe_set_masked_gpes(char *val)
+{
+	u8 gpe;
+
+	if (kstrtou8(val, 0, &gpe) || gpe > ACPI_MASKABLE_GPE_MAX)
+		return -EINVAL;
+	acpi_masked_gpes |= ((u64)1<<gpe);
+
+	return 1;
+}
+__setup("acpi_mask_gpe=", acpi_gpe_set_masked_gpes);
+
+void __init acpi_gpe_apply_masked_gpes(void)
+{
+	acpi_handle handle;
+	acpi_status status;
+	u8 gpe;
+
+	for (gpe = 0;
+	     gpe < min_t(u8, ACPI_MASKABLE_GPE_MAX, acpi_current_gpe_count);
+	     gpe++) {
+		if (acpi_masked_gpes & ((u64)1<<gpe)) {
+			status = acpi_get_gpe_device(gpe, &handle);
+			if (ACPI_SUCCESS(status)) {
+				pr_info("Masking GPE 0x%x.\n", gpe);
+				(void)acpi_mask_gpe(handle, gpe, TRUE);
+			}
+		}
+	}
+}
+
 void acpi_irq_stats_init(void)
 {
 	acpi_status status;

drivers/base/power/domain.c

@@ -626,6 +626,7 @@ static int genpd_runtime_resume(struct device *dev)
 
  out:
 	/* Measure resume latency. */
+	time_start = 0;
 	if (timed && runtime_pm)
 		time_start = ktime_get();
 

drivers/clk/clk-stm32f4.c

@@ -768,5 +768,5 @@ fail:
 	kfree(clks);
 	iounmap(base);
 }
-CLK_OF_DECLARE(stm32f42xx_rcc, "st,stm32f42xx-rcc", stm32f4_rcc_init);
-CLK_OF_DECLARE(stm32f46xx_rcc, "st,stm32f469-rcc", stm32f4_rcc_init);
+CLK_OF_DECLARE_DRIVER(stm32f42xx_rcc, "st,stm32f42xx-rcc", stm32f4_rcc_init);
+CLK_OF_DECLARE_DRIVER(stm32f46xx_rcc, "st,stm32f469-rcc", stm32f4_rcc_init);

drivers/clk/renesas/clk-mstp.c

@@ -37,12 +37,14 @@
  * @smstpcr: module stop control register
  * @mstpsr: module stop status register (optional)
  * @lock: protects writes to SMSTPCR
+ * @width_8bit: registers are 8-bit, not 32-bit
  */
 struct mstp_clock_group {
 	struct clk_onecell_data data;
 	void __iomem *smstpcr;
 	void __iomem *mstpsr;
 	spinlock_t lock;
+	bool width_8bit;
 };
 
 /**
@@ -59,6 +61,18 @@ struct mstp_clock {
 
 #define to_mstp_clock(_hw) container_of(_hw, struct mstp_clock, hw)
 
+static inline u32 cpg_mstp_read(struct mstp_clock_group *group,
+				u32 __iomem *reg)
+{
+	return group->width_8bit ? readb(reg) : clk_readl(reg);
+}
+
+static inline void cpg_mstp_write(struct mstp_clock_group *group, u32 val,
+				  u32 __iomem *reg)
+{
+	group->width_8bit ? writeb(val, reg) : clk_writel(val, reg);
+}
+
 static int cpg_mstp_clock_endisable(struct clk_hw *hw, bool enable)
 {
 	struct mstp_clock *clock = to_mstp_clock(hw);
@@ -70,12 +84,12 @@ static int cpg_mstp_clock_endisable(struct clk_hw *hw, bool enable)
 
 	spin_lock_irqsave(&group->lock, flags);
 
-	value = clk_readl(group->smstpcr);
+	value = cpg_mstp_read(group, group->smstpcr);
 	if (enable)
 		value &= ~bitmask;
 	else
 		value |= bitmask;
-	clk_writel(value, group->smstpcr);
+	cpg_mstp_write(group, value, group->smstpcr);
 
 	spin_unlock_irqrestore(&group->lock, flags);
 
@@ -83,7 +97,7 @@ static int cpg_mstp_clock_endisable(struct clk_hw *hw, bool enable)
 		return 0;
 
 	for (i = 1000; i > 0; --i) {
-		if (!(clk_readl(group->mstpsr) & bitmask))
+		if (!(cpg_mstp_read(group, group->mstpsr) & bitmask))
 			break;
 		cpu_relax();
 	}
@@ -114,9 +128,9 @@ static int cpg_mstp_clock_is_enabled(struct clk_hw *hw)
 	u32 value;
 
 	if (group->mstpsr)
-		value = clk_readl(group->mstpsr);
+		value = cpg_mstp_read(group, group->mstpsr);
 	else
-		value = clk_readl(group->smstpcr);
+		value = cpg_mstp_read(group, group->smstpcr);
 
 	return !(value & BIT(clock->bit_index));
 }
@@ -188,6 +202,9 @@ static void __init cpg_mstp_clocks_init(struct device_node *np)
 		return;
 	}
 
+	if (of_device_is_compatible(np, "renesas,r7s72100-mstp-clocks"))
+		group->width_8bit = true;
+
 	for (i = 0; i < MSTP_MAX_CLOCKS; ++i)
 		clks[i] = ERR_PTR(-ENOENT);
 

drivers/cpufreq/cpufreq-dt-platdev.c

@@ -26,6 +26,8 @@ static const struct of_device_id machines[] __initconst = {
 	{ .compatible = "allwinner,sun8i-a83t", },
 	{ .compatible = "allwinner,sun8i-h3", },
 
+	{ .compatible = "apm,xgene-shadowcat", },
+
 	{ .compatible = "arm,integrator-ap", },
 	{ .compatible = "arm,integrator-cp", },
 

drivers/cpufreq/intel_pstate.c

@@ -857,13 +857,13 @@ static struct freq_attr *hwp_cpufreq_attrs[] = {
 	NULL,
 };
 
-static void intel_pstate_hwp_set(const struct cpumask *cpumask)
+static void intel_pstate_hwp_set(struct cpufreq_policy *policy)
 {
 	int min, hw_min, max, hw_max, cpu, range, adj_range;
 	struct perf_limits *perf_limits = limits;
 	u64 value, cap;
 
-	for_each_cpu(cpu, cpumask) {
+	for_each_cpu(cpu, policy->cpus) {
 		int max_perf_pct, min_perf_pct;
 		struct cpudata *cpu_data = all_cpu_data[cpu];
 		s16 epp;
@@ -949,7 +949,7 @@ skip_epp:
 static int intel_pstate_hwp_set_policy(struct cpufreq_policy *policy)
 {
 	if (hwp_active)
-		intel_pstate_hwp_set(policy->cpus);
+		intel_pstate_hwp_set(policy);
 
 	return 0;
 }
@@ -968,19 +968,28 @@ static int intel_pstate_hwp_save_state(struct cpufreq_policy *policy)
 
 static int intel_pstate_resume(struct cpufreq_policy *policy)
 {
+	int ret;
+
 	if (!hwp_active)
 		return 0;
 
+	mutex_lock(&intel_pstate_limits_lock);
+
 	all_cpu_data[policy->cpu]->epp_policy = 0;
 
-	return intel_pstate_hwp_set_policy(policy);
+	ret = intel_pstate_hwp_set_policy(policy);
+
+	mutex_unlock(&intel_pstate_limits_lock);
+
+	return ret;
 }
 
-static void intel_pstate_hwp_set_online_cpus(void)
+static void intel_pstate_update_policies(void)
 {
-	get_online_cpus();
-	intel_pstate_hwp_set(cpu_online_mask);
-	put_online_cpus();
+	int cpu;
+
+	for_each_possible_cpu(cpu)
+		cpufreq_update_policy(cpu);
 }
 
 /************************** debugfs begin ************************/
@@ -1018,10 +1027,6 @@ static void __init intel_pstate_debug_expose_params(void)
 	struct dentry *debugfs_parent;
 	int i = 0;
 
-	if (hwp_active ||
-	    pstate_funcs.get_target_pstate == get_target_pstate_use_cpu_load)
-		return;
-
 	debugfs_parent = debugfs_create_dir("pstate_snb", NULL);
 	if (IS_ERR_OR_NULL(debugfs_parent))
 		return;
@@ -1105,11 +1110,10 @@ static ssize_t store_no_turbo(struct kobject *a, struct attribute *b,
 
 	limits->no_turbo = clamp_t(int, input, 0, 1);
 
-	if (hwp_active)
-		intel_pstate_hwp_set_online_cpus();
-
 	mutex_unlock(&intel_pstate_limits_lock);
 
+	intel_pstate_update_policies();
+
 	return count;
 }
 
@@ -1134,11 +1138,10 @@ static ssize_t store_max_perf_pct(struct kobject *a, struct attribute *b,
 				   limits->max_perf_pct);
 	limits->max_perf = div_ext_fp(limits->max_perf_pct, 100);
 
-	if (hwp_active)
-		intel_pstate_hwp_set_online_cpus();
-
 	mutex_unlock(&intel_pstate_limits_lock);
 
+	intel_pstate_update_policies();
+
 	return count;
 }
 
@@ -1163,11 +1166,10 @@ static ssize_t store_min_perf_pct(struct kobject *a, struct attribute *b,
 				   limits->min_perf_pct);
 	limits->min_perf = div_ext_fp(limits->min_perf_pct, 100);
 
-	if (hwp_active)
-		intel_pstate_hwp_set_online_cpus();
-
 	mutex_unlock(&intel_pstate_limits_lock);
 
+	intel_pstate_update_policies();
+
 	return count;
 }
 
@@ -2153,8 +2155,12 @@ static int intel_cpufreq_verify_policy(struct cpufreq_policy *policy)
 	if (per_cpu_limits)
 		perf_limits = cpu->perf_limits;
 
+	mutex_lock(&intel_pstate_limits_lock);
+
 	intel_pstate_update_perf_limits(policy, perf_limits);
 
+	mutex_unlock(&intel_pstate_limits_lock);
+
 	return 0;
 }
 
@@ -2487,7 +2493,10 @@ hwp_cpu_matched:
 	if (rc)
 		goto out;
 
-	intel_pstate_debug_expose_params();
+	if (intel_pstate_driver == &intel_pstate && !hwp_active &&
+	    pstate_funcs.get_target_pstate != get_target_pstate_use_cpu_load)
+		intel_pstate_debug_expose_params();
+
 	intel_pstate_sysfs_expose_params();
 
 	if (hwp_active)

drivers/devfreq/devfreq.c

@@ -593,11 +593,16 @@ struct devfreq *devfreq_add_device(struct device *dev,
 	list_add(&devfreq->node, &devfreq_list);
 
 	governor = find_devfreq_governor(devfreq->governor_name);
-	if (!IS_ERR(governor))
-		devfreq->governor = governor;
-	if (devfreq->governor)
-		err = devfreq->governor->event_handler(devfreq,
-					DEVFREQ_GOV_START, NULL);
+	if (IS_ERR(governor)) {
+		dev_err(dev, "%s: Unable to find governor for the device\n",
+			__func__);
+		err = PTR_ERR(governor);
+		goto err_init;
+	}
+
+	devfreq->governor = governor;
+	err = devfreq->governor->event_handler(devfreq, DEVFREQ_GOV_START,
+						NULL);
 	if (err) {
 		dev_err(dev, "%s: Unable to start governor for the device\n",
 			__func__);

drivers/devfreq/exynos-bus.c

@@ -497,7 +497,7 @@ passive:
 	if (IS_ERR(bus->devfreq)) {
 		dev_err(dev,
 			"failed to add devfreq dev with passive governor\n");
-		ret = -EPROBE_DEFER;
+		ret = PTR_ERR(bus->devfreq);
 		goto err;
 	}
 

drivers/dma-buf/dma-buf.c

@@ -128,7 +128,7 @@ static loff_t dma_buf_llseek(struct file *file, loff_t offset, int whence)
  * DOC: fence polling
  *
  * To support cross-device and cross-driver synchronization of buffer access
- * implicit fences (represented internally in the kernel with struct &fence) can
+ * implicit fences (represented internally in the kernel with &struct fence) can
  * be attached to a &dma_buf. The glue for that and a few related things are
  * provided in the &reservation_object structure.
  *
@@ -373,7 +373,7 @@ static inline int is_dma_buf_file(struct file *file)
  * Additionally, provide a name string for exporter; useful in debugging.
  *
  * @exp_info:	[in]	holds all the export related information provided
- *			by the exporter. see struct &dma_buf_export_info
+ *			by the exporter. see &struct dma_buf_export_info
  *			for further details.
  *
  * Returns, on success, a newly created dma_buf object, which wraps the
@@ -516,9 +516,8 @@ EXPORT_SYMBOL_GPL(dma_buf_get);
  * Uses file's refcounting done implicitly by fput().
  *
  * If, as a result of this call, the refcount becomes 0, the 'release' file
- * operation related to this fd is called. It calls the release operation of
- * struct &dma_buf_ops in turn, and frees the memory allocated for dmabuf when
- * exported.
+ * operation related to this fd is called. It calls &dma_buf_ops.release vfunc
+ * in turn, and frees the memory allocated for dmabuf when exported.
  */
 void dma_buf_put(struct dma_buf *dmabuf)
 {

drivers/dma-buf/dma-fence.c

@@ -281,6 +281,31 @@ int dma_fence_add_callback(struct dma_fence *fence, struct dma_fence_cb *cb,
 }
 EXPORT_SYMBOL(dma_fence_add_callback);
 
+/**
+ * dma_fence_get_status - returns the status upon completion
+ * @fence: [in]	the dma_fence to query
+ *
+ * This wraps dma_fence_get_status_locked() to return the error status
+ * condition on a signaled fence. See dma_fence_get_status_locked() for more
+ * details.
+ *
+ * Returns 0 if the fence has not yet been signaled, 1 if the fence has
+ * been signaled without an error condition, or a negative error code
+ * if the fence has been completed in err.
+ */
+int dma_fence_get_status(struct dma_fence *fence)
+{
+	unsigned long flags;
+	int status;
+
+	spin_lock_irqsave(fence->lock, flags);
+	status = dma_fence_get_status_locked(fence);
+	spin_unlock_irqrestore(fence->lock, flags);
+
+	return status;
+}
+EXPORT_SYMBOL(dma_fence_get_status);
+
 /**
  * dma_fence_remove_callback - remove a callback from the signaling list
  * @fence:	[in]	the fence to wait on
@@ -541,6 +566,7 @@ dma_fence_init(struct dma_fence *fence, const struct dma_fence_ops *ops,
 	fence->context = context;
 	fence->seqno = seqno;
 	fence->flags = 0UL;
+	fence->error = 0;
 
 	trace_dma_fence_init(fence);
 }

drivers/dma-buf/sync_debug.c

@@ -62,30 +62,29 @@ void sync_file_debug_remove(struct sync_file *sync_file)
 
 static const char *sync_status_str(int status)
 {
-	if (status == 0)
-		return "signaled";
+	if (status < 0)
+		return "error";
 
 	if (status > 0)
-		return "active";
+		return "signaled";
 
-	return "error";
+	return "active";
 }
 
 static void sync_print_fence(struct seq_file *s,
 			     struct dma_fence *fence, bool show)
 {
-	int status = 1;
 	struct sync_timeline *parent = dma_fence_parent(fence);
+	int status;
 
-	if (dma_fence_is_signaled_locked(fence))
-		status = fence->status;
+	status = dma_fence_get_status_locked(fence);
 
 	seq_printf(s, "  %s%sfence %s",
 		   show ? parent->name : "",
 		   show ? "_" : "",
 		   sync_status_str(status));
 
-	if (status <= 0) {
+	if (status) {
 		struct timespec64 ts64 =
 			ktime_to_timespec64(fence->timestamp);
 
@@ -136,7 +135,7 @@ static void sync_print_sync_file(struct seq_file *s,
 	int i;
 
 	seq_printf(s, "[%p] %s: %s\n", sync_file, sync_file->name,
-		   sync_status_str(!dma_fence_is_signaled(sync_file->fence)));
+		   sync_status_str(dma_fence_get_status(sync_file->fence)));
 
 	if (dma_fence_is_array(sync_file->fence)) {
 		struct dma_fence_array *array = to_dma_fence_array(sync_file->fence);

drivers/dma-buf/sync_file.c

@@ -373,10 +373,8 @@ static void sync_fill_fence_info(struct dma_fence *fence,
 		sizeof(info->obj_name));
 	strlcpy(info->driver_name, fence->ops->get_driver_name(fence),
 		sizeof(info->driver_name));
-	if (dma_fence_is_signaled(fence))
-		info->status = fence->status >= 0 ? 1 : fence->status;
-	else
-		info->status = 0;
+
+	info->status = dma_fence_get_status(fence);
 	info->timestamp_ns = ktime_to_ns(fence->timestamp);
 }
 

drivers/firmware/arm_scpi.c

@@ -721,11 +721,17 @@ static int scpi_sensor_get_value(u16 sensor, u64 *val)
 
 	ret = scpi_send_message(CMD_SENSOR_VALUE, &id, sizeof(id),
 				&buf, sizeof(buf));
-	if (!ret)
+	if (ret)
+		return ret;
+
+	if (scpi_info->is_legacy)
+		/* only 32-bits supported, hi_val can be junk */
+		*val = le32_to_cpu(buf.lo_val);
+	else
 		*val = (u64)le32_to_cpu(buf.hi_val) << 32 |
 			le32_to_cpu(buf.lo_val);
 
-	return ret;
+	return 0;
 }
 
 static int scpi_device_get_power_state(u16 dev_id)