Merge branch 'sched/urgent' into sched/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Documentation/ABI/testing/sysfs-class-cxl

@@ -244,3 +244,11 @@ Description:    read only
                 Returns 1 if the psl timebase register is synchronized
                 with the core timebase register, 0 otherwise.
 Users:          https://github.com/ibm-capi/libcxl
+
+What:           /sys/class/cxl/<card>/tunneled_ops_supported
+Date:           May 2018
+Contact:        linuxppc-dev@lists.ozlabs.org
+Description:    read only
+                Returns 1 if tunneled operations are supported in capi mode,
+                0 otherwise.
+Users:          https://github.com/ibm-capi/libcxl

Documentation/ABI/testing/sysfs-devices-system-cpu

@@ -478,6 +478,7 @@ What:		/sys/devices/system/cpu/vulnerabilities
 		/sys/devices/system/cpu/vulnerabilities/meltdown
 		/sys/devices/system/cpu/vulnerabilities/spectre_v1
 		/sys/devices/system/cpu/vulnerabilities/spectre_v2
+		/sys/devices/system/cpu/vulnerabilities/spec_store_bypass
 Date:		January 2018
 Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
 Description:	Information about CPU vulnerabilities

Documentation/admin-guide/kernel-parameters.txt

@@ -2680,6 +2680,9 @@
 			allow data leaks with this option, which is equivalent
 			to spectre_v2=off.
 
+	nospec_store_bypass_disable
+			[HW] Disable all mitigations for the Speculative Store Bypass vulnerability
+
 	noxsave		[BUGS=X86] Disables x86 extended register state save
 			and restore using xsave. The kernel will fallback to
 			enabling legacy floating-point and sse state.
@@ -4025,6 +4028,48 @@
 			Not specifying this option is equivalent to
 			spectre_v2=auto.
 
+	spec_store_bypass_disable=
+			[HW] Control Speculative Store Bypass (SSB) Disable mitigation
+			(Speculative Store Bypass vulnerability)
+
+			Certain CPUs are vulnerable to an exploit against a
+			a common industry wide performance optimization known
+			as "Speculative Store Bypass" in which recent stores
+			to the same memory location may not be observed by
+			later loads during speculative execution. The idea
+			is that such stores are unlikely and that they can
+			be detected prior to instruction retirement at the
+			end of a particular speculation execution window.
+
+			In vulnerable processors, the speculatively forwarded
+			store can be used in a cache side channel attack, for
+			example to read memory to which the attacker does not
+			directly have access (e.g. inside sandboxed code).
+
+			This parameter controls whether the Speculative Store
+			Bypass optimization is used.
+
+			on      - Unconditionally disable Speculative Store Bypass
+			off     - Unconditionally enable Speculative Store Bypass
+			auto    - Kernel detects whether the CPU model contains an
+				  implementation of Speculative Store Bypass and
+				  picks the most appropriate mitigation. If the
+				  CPU is not vulnerable, "off" is selected. If the
+				  CPU is vulnerable the default mitigation is
+				  architecture and Kconfig dependent. See below.
+			prctl   - Control Speculative Store Bypass per thread
+				  via prctl. Speculative Store Bypass is enabled
+				  for a process by default. The state of the control
+				  is inherited on fork.
+			seccomp - Same as "prctl" above, but all seccomp threads
+				  will disable SSB unless they explicitly opt out.
+
+			Not specifying this option is equivalent to
+			spec_store_bypass_disable=auto.
+
+			Default mitigations:
+			X86:	If CONFIG_SECCOMP=y "seccomp", otherwise "prctl"
+
 	spia_io_base=	[HW,MTD]
 	spia_fio_base=
 	spia_pedr=

Documentation/devicetree/bindings/net/marvell-pp2.txt

@@ -21,9 +21,10 @@ Required properties:
 	- main controller clock (for both armada-375-pp2 and armada-7k-pp2)
 	- GOP clock (for both armada-375-pp2 and armada-7k-pp2)
 	- MG clock (only for armada-7k-pp2)
+	- MG Core clock (only for armada-7k-pp2)
 	- AXI clock (only for armada-7k-pp2)
-- clock-names: names of used clocks, must be "pp_clk", "gop_clk", "mg_clk"
-  and "axi_clk" (the 2 latter only for armada-7k-pp2).
+- clock-names: names of used clocks, must be "pp_clk", "gop_clk", "mg_clk",
+  "mg_core_clk" and "axi_clk" (the 3 latter only for armada-7k-pp2).
 
 The ethernet ports are represented by subnodes. At least one port is
 required.
@@ -80,8 +81,8 @@ cpm_ethernet: ethernet@0 {
 	compatible = "marvell,armada-7k-pp22";
 	reg = <0x0 0x100000>, <0x129000 0xb000>;
 	clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>,
-		 <&cpm_syscon0 1 5>, <&cpm_syscon0 1 18>;
-	clock-names = "pp_clk", "gop_clk", "gp_clk", "axi_clk";
+		 <&cpm_syscon0 1 5>, <&cpm_syscon0 1 6>, <&cpm_syscon0 1 18>;
+	clock-names = "pp_clk", "gop_clk", "mg_clk", "mg_core_clk", "axi_clk";
 
 	eth0: eth0 {
 		interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,

Documentation/devicetree/bindings/net/micrel-ksz90x1.txt

@@ -57,6 +57,13 @@ KSZ9031:
       - txd2-skew-ps : Skew control of TX data 2 pad
       - txd3-skew-ps : Skew control of TX data 3 pad
 
+    - micrel,force-master:
+        Boolean, force phy to master mode. Only set this option if the phy
+        reference clock provided at CLK125_NDO pin is used as MAC reference
+        clock because the clock jitter in slave mode is to high (errata#2).
+        Attention: The link partner must be configurable as slave otherwise
+        no link will be established.
+
 Examples:
 
 	mdio {

Documentation/userspace-api/index.rst

@@ -19,6 +19,7 @@ place where this information is gathered.
    no_new_privs
    seccomp_filter
    unshare
+   spec_ctrl
 
 .. only::  subproject and html
 

Documentation/userspace-api/spec_ctrl.rst

@@ -0,0 +1,94 @@
+===================
+Speculation Control
+===================
+
+Quite some CPUs have speculation-related misfeatures which are in
+fact vulnerabilities causing data leaks in various forms even across
+privilege domains.
+
+The kernel provides mitigation for such vulnerabilities in various
+forms. Some of these mitigations are compile-time configurable and some
+can be supplied on the kernel command line.
+
+There is also a class of mitigations which are very expensive, but they can
+be restricted to a certain set of processes or tasks in controlled
+environments. The mechanism to control these mitigations is via
+:manpage:`prctl(2)`.
+
+There are two prctl options which are related to this:
+
+ * PR_GET_SPECULATION_CTRL
+
+ * PR_SET_SPECULATION_CTRL
+
+PR_GET_SPECULATION_CTRL
+-----------------------
+
+PR_GET_SPECULATION_CTRL returns the state of the speculation misfeature
+which is selected with arg2 of prctl(2). The return value uses bits 0-3 with
+the following meaning:
+
+==== ===================== ===================================================
+Bit  Define                Description
+==== ===================== ===================================================
+0    PR_SPEC_PRCTL         Mitigation can be controlled per task by
+                           PR_SET_SPECULATION_CTRL.
+1    PR_SPEC_ENABLE        The speculation feature is enabled, mitigation is
+                           disabled.
+2    PR_SPEC_DISABLE       The speculation feature is disabled, mitigation is
+                           enabled.
+3    PR_SPEC_FORCE_DISABLE Same as PR_SPEC_DISABLE, but cannot be undone. A
+                           subsequent prctl(..., PR_SPEC_ENABLE) will fail.
+==== ===================== ===================================================
+
+If all bits are 0 the CPU is not affected by the speculation misfeature.
+
+If PR_SPEC_PRCTL is set, then the per-task control of the mitigation is
+available. If not set, prctl(PR_SET_SPECULATION_CTRL) for the speculation
+misfeature will fail.
+
+PR_SET_SPECULATION_CTRL
+-----------------------
+
+PR_SET_SPECULATION_CTRL allows to control the speculation misfeature, which
+is selected by arg2 of :manpage:`prctl(2)` per task. arg3 is used to hand
+in the control value, i.e. either PR_SPEC_ENABLE or PR_SPEC_DISABLE or
+PR_SPEC_FORCE_DISABLE.
+
+Common error codes
+------------------
+======= =================================================================
+Value   Meaning
+======= =================================================================
+EINVAL  The prctl is not implemented by the architecture or unused
+        prctl(2) arguments are not 0.
+
+ENODEV  arg2 is selecting a not supported speculation misfeature.
+======= =================================================================
+
+PR_SET_SPECULATION_CTRL error codes
+-----------------------------------
+======= =================================================================
+Value   Meaning
+======= =================================================================
+0       Success
+
+ERANGE  arg3 is incorrect, i.e. it's neither PR_SPEC_ENABLE nor
+        PR_SPEC_DISABLE nor PR_SPEC_FORCE_DISABLE.
+
+ENXIO   Control of the selected speculation misfeature is not possible.
+        See PR_GET_SPECULATION_CTRL.
+
+EPERM   Speculation was disabled with PR_SPEC_FORCE_DISABLE and caller
+        tried to enable it again.
+======= =================================================================
+
+Speculation misfeature controls
+-------------------------------
+- PR_SPEC_STORE_BYPASS: Speculative Store Bypass
+
+  Invocations:
+   * prctl(PR_GET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, 0, 0, 0);
+   * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, PR_SPEC_ENABLE, 0, 0);
+   * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, PR_SPEC_DISABLE, 0, 0);
+   * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, PR_SPEC_FORCE_DISABLE, 0, 0);

Documentation/virtual/kvm/cpuid.txt

@@ -72,8 +72,8 @@ KVM_FEATURE_CLOCKSOURCE_STABLE_BIT ||    24 || host will warn if no guest-side
 
 flag                               || value || meaning
 ==================================================================================
-KVM_HINTS_DEDICATED                ||     0 || guest checks this feature bit to
-                                   ||       || determine if there is vCPU pinning
-                                   ||       || and there is no vCPU over-commitment,
+KVM_HINTS_REALTIME                 ||     0 || guest checks this feature bit to
+                                   ||       || determine that vCPUs are never
+                                   ||       || preempted for an unlimited time,
                                    ||       || allowing optimizations
 ----------------------------------------------------------------------------------

MAINTAINERS

@@ -4309,7 +4309,7 @@ F:	Documentation/driver-api/dma-buf.rst
 T:	git git://anongit.freedesktop.org/drm/drm-misc
 
 DMA GENERIC OFFLOAD ENGINE SUBSYSTEM
-M:	Vinod Koul <vinod.koul@intel.com>
+M:	Vinod Koul <vkoul@kernel.org>
 L:	dmaengine@vger.kernel.org
 Q:	https://patchwork.kernel.org/project/linux-dmaengine/list/
 S:	Maintained
@@ -5388,7 +5388,6 @@ S:	Maintained
 F:	drivers/iommu/exynos-iommu.c
 
 EZchip NPS platform support
-M:	Elad Kanfi <eladkan@mellanox.com>
 M:	Vineet Gupta <vgupta@synopsys.com>
 S:	Supported
 F:	arch/arc/plat-eznps
@@ -7698,6 +7697,7 @@ KERNEL SELFTEST FRAMEWORK
 M:	Shuah Khan <shuah@kernel.org>
 L:	linux-kselftest@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git
+Q:	https://patchwork.kernel.org/project/linux-kselftest/list/
 S:	Maintained
 F:	tools/testing/selftests/
 F:	Documentation/dev-tools/kselftest*
@@ -9020,7 +9020,6 @@ Q:	http://patchwork.ozlabs.org/project/netdev/list/
 F:	drivers/net/ethernet/mellanox/mlx5/core/en_*
 
 MELLANOX ETHERNET INNOVA DRIVER
-M:	Ilan Tayari <ilant@mellanox.com>
 R:	Boris Pismenny <borisp@mellanox.com>
 L:	netdev@vger.kernel.org
 S:	Supported
@@ -9030,7 +9029,6 @@ F:	drivers/net/ethernet/mellanox/mlx5/core/fpga/*
 F:	include/linux/mlx5/mlx5_ifc_fpga.h
 
 MELLANOX ETHERNET INNOVA IPSEC DRIVER
-M:	Ilan Tayari <ilant@mellanox.com>
 R:	Boris Pismenny <borisp@mellanox.com>
 L:	netdev@vger.kernel.org
 S:	Supported
@@ -9086,7 +9084,6 @@ F:	include/uapi/rdma/mlx4-abi.h
 
 MELLANOX MLX5 core VPI driver
 M:	Saeed Mahameed <saeedm@mellanox.com>
-M:	Matan Barak <matanb@mellanox.com>
 M:	Leon Romanovsky <leonro@mellanox.com>
 L:	netdev@vger.kernel.org
 L:	linux-rdma@vger.kernel.org
@@ -9097,7 +9094,6 @@ F:	drivers/net/ethernet/mellanox/mlx5/core/
 F:	include/linux/mlx5/
 
 MELLANOX MLX5 IB driver
-M:	Matan Barak <matanb@mellanox.com>
 M:	Leon Romanovsky <leonro@mellanox.com>
 L:	linux-rdma@vger.kernel.org
 W:	http://www.mellanox.com
@@ -9831,7 +9827,6 @@ F:	net/netfilter/xt_CONNSECMARK.c
 F:	net/netfilter/xt_SECMARK.c
 
 NETWORKING [TLS]
-M:	Ilya Lesokhin <ilyal@mellanox.com>
 M:	Aviad Yehezkel <aviadye@mellanox.com>
 M:	Dave Watson <davejwatson@fb.com>
 L:	netdev@vger.kernel.org
@@ -12220,7 +12215,7 @@ F:	Documentation/s390/vfio-ccw.txt
 F:	include/uapi/linux/vfio_ccw.h
 
 S390 ZCRYPT DRIVER
-M:	Harald Freudenberger <freude@de.ibm.com>
+M:	Harald Freudenberger <freude@linux.ibm.com>
 L:	linux-s390@vger.kernel.org
 W:	http://www.ibm.com/developerworks/linux/linux390/
 S:	Supported
@@ -13264,6 +13259,12 @@ M:	Jan-Benedict Glaw <jbglaw@lug-owl.de>
 S:	Maintained
 F:	arch/alpha/kernel/srm_env.c
 
+ST STM32 I2C/SMBUS DRIVER
+M:	Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
+L:	linux-i2c@vger.kernel.org
+S:	Maintained
+F:	drivers/i2c/busses/i2c-stm32*
+
 STABLE BRANCH
 M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 L:	stable@vger.kernel.org

Makefile

@@ -2,7 +2,7 @@
 VERSION = 4
 PATCHLEVEL = 17
 SUBLEVEL = 0
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
 NAME = Merciless Moray
 
 # *DOCUMENTATION*

arch/alpha/Kconfig

@@ -211,6 +211,7 @@ config ALPHA_EIGER
 config ALPHA_JENSEN
 	bool "Jensen"
 	depends on BROKEN
+	select DMA_DIRECT_OPS
 	help
 	  DEC PC 150 AXP (aka Jensen): This is a very old Digital system - one
 	  of the first-generation Alpha systems. A number of these systems

arch/alpha/include/asm/dma-mapping.h

@@ -2,11 +2,15 @@
 #ifndef _ALPHA_DMA_MAPPING_H
 #define _ALPHA_DMA_MAPPING_H
 
-extern const struct dma_map_ops *dma_ops;
+extern const struct dma_map_ops alpha_pci_ops;
 
 static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
 {
-	return dma_ops;
+#ifdef CONFIG_ALPHA_JENSEN
+	return &dma_direct_ops;
+#else
+	return &alpha_pci_ops;
+#endif
 }
 
 #endif	/* _ALPHA_DMA_MAPPING_H */

arch/alpha/kernel/io.c

@@ -37,20 +37,20 @@ unsigned int ioread32(void __iomem *addr)
 
 void iowrite8(u8 b, void __iomem *addr)
 {
-	IO_CONCAT(__IO_PREFIX,iowrite8)(b, addr);
 	mb();
+	IO_CONCAT(__IO_PREFIX,iowrite8)(b, addr);
 }
 
 void iowrite16(u16 b, void __iomem *addr)
 {
-	IO_CONCAT(__IO_PREFIX,iowrite16)(b, addr);
 	mb();
+	IO_CONCAT(__IO_PREFIX,iowrite16)(b, addr);
 }
 
 void iowrite32(u32 b, void __iomem *addr)
 {
-	IO_CONCAT(__IO_PREFIX,iowrite32)(b, addr);
 	mb();
+	IO_CONCAT(__IO_PREFIX,iowrite32)(b, addr);
 }
 
 EXPORT_SYMBOL(ioread8);
@@ -176,26 +176,26 @@ u64 readq(const volatile void __iomem *addr)
 
 void writeb(u8 b, volatile void __iomem *addr)
 {
-	__raw_writeb(b, addr);
 	mb();
+	__raw_writeb(b, addr);
 }
 
 void writew(u16 b, volatile void __iomem *addr)
 {
-	__raw_writew(b, addr);
 	mb();
+	__raw_writew(b, addr);
 }
 
 void writel(u32 b, volatile void __iomem *addr)
 {
-	__raw_writel(b, addr);
 	mb();
+	__raw_writel(b, addr);
 }
 
 void writeq(u64 b, volatile void __iomem *addr)
 {
-	__raw_writeq(b, addr);
 	mb();
+	__raw_writeq(b, addr);
 }
 
 EXPORT_SYMBOL(readb);

arch/alpha/kernel/pci-noop.c

@@ -102,36 +102,3 @@ SYSCALL_DEFINE5(pciconfig_write, unsigned long, bus, unsigned long, dfn,
 	else
 		return -ENODEV;
 }
-
-static void *alpha_noop_alloc_coherent(struct device *dev, size_t size,
-				       dma_addr_t *dma_handle, gfp_t gfp,
-				       unsigned long attrs)
-{
-	void *ret;
-
-	if (!dev || *dev->dma_mask >= 0xffffffffUL)
-		gfp &= ~GFP_DMA;
-	ret = (void *)__get_free_pages(gfp, get_order(size));
-	if (ret) {
-		memset(ret, 0, size);
-		*dma_handle = virt_to_phys(ret);
-	}
-	return ret;
-}
-
-static int alpha_noop_supported(struct device *dev, u64 mask)
-{
-	return mask < 0x00ffffffUL ? 0 : 1;
-}
-
-const struct dma_map_ops alpha_noop_ops = {
-	.alloc			= alpha_noop_alloc_coherent,
-	.free			= dma_noop_free_coherent,
-	.map_page		= dma_noop_map_page,
-	.map_sg			= dma_noop_map_sg,
-	.mapping_error		= dma_noop_mapping_error,
-	.dma_supported		= alpha_noop_supported,
-};
-
-const struct dma_map_ops *dma_ops = &alpha_noop_ops;
-EXPORT_SYMBOL(dma_ops);

arch/alpha/kernel/pci_iommu.c

@@ -950,6 +950,4 @@ const struct dma_map_ops alpha_pci_ops = {
 	.mapping_error		= alpha_pci_mapping_error,
 	.dma_supported		= alpha_pci_supported,
 };
-
-const struct dma_map_ops *dma_ops = &alpha_pci_ops;
-EXPORT_SYMBOL(dma_ops);
+EXPORT_SYMBOL(alpha_pci_ops);

arch/arm/boot/compressed/Makefile

@@ -117,11 +117,9 @@ ccflags-y := -fpic -mno-single-pic-base -fno-builtin -I$(obj)
 asflags-y := -DZIMAGE
 
 # Supply kernel BSS size to the decompressor via a linker symbol.
-KBSS_SZ = $(shell $(CROSS_COMPILE)nm $(obj)/../../../../vmlinux | \
-		perl -e 'while (<>) { \
-			$$bss_start=hex($$1) if /^([[:xdigit:]]+) B __bss_start$$/; \
-			$$bss_end=hex($$1) if /^([[:xdigit:]]+) B __bss_stop$$/; \
-		}; printf "%d\n", $$bss_end - $$bss_start;')
+KBSS_SZ = $(shell echo $$(($$($(CROSS_COMPILE)nm $(obj)/../../../../vmlinux | \
+		sed -n -e 's/^\([^ ]*\) [AB] __bss_start$$/-0x\1/p' \
+		       -e 's/^\([^ ]*\) [AB] __bss_stop$$/+0x\1/p') )) )
 LDFLAGS_vmlinux = --defsym _kernel_bss_size=$(KBSS_SZ)
 # Supply ZRELADDR to the decompressor via a linker symbol.
 ifneq ($(CONFIG_AUTO_ZRELADDR),y)

arch/arm/boot/compressed/head.S

@@ -29,19 +29,19 @@
 #if defined(CONFIG_DEBUG_ICEDCC)
 
 #if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
-		.macro	loadsp, rb, tmp
+		.macro	loadsp, rb, tmp1, tmp2
 		.endm
 		.macro	writeb, ch, rb
 		mcr	p14, 0, \ch, c0, c5, 0
 		.endm
 #elif defined(CONFIG_CPU_XSCALE)
-		.macro	loadsp, rb, tmp
+		.macro	loadsp, rb, tmp1, tmp2
 		.endm
 		.macro	writeb, ch, rb
 		mcr	p14, 0, \ch, c8, c0, 0
 		.endm
 #else
-		.macro	loadsp, rb, tmp
+		.macro	loadsp, rb, tmp1, tmp2
 		.endm
 		.macro	writeb, ch, rb
 		mcr	p14, 0, \ch, c1, c0, 0
@@ -57,7 +57,7 @@
 		.endm
 
 #if defined(CONFIG_ARCH_SA1100)
-		.macro	loadsp, rb, tmp
+		.macro	loadsp, rb, tmp1, tmp2
 		mov	\rb, #0x80000000	@ physical base address
 #ifdef CONFIG_DEBUG_LL_SER3
 		add	\rb, \rb, #0x00050000	@ Ser3
@@ -66,8 +66,8 @@
 #endif
 		.endm
 #else
-		.macro	loadsp,	rb, tmp
-		addruart \rb, \tmp
+		.macro	loadsp,	rb, tmp1, tmp2
+		addruart \rb, \tmp1, \tmp2
 		.endm
 #endif
 #endif
@@ -561,8 +561,6 @@ not_relocated:	mov	r0, #0
 		bl	decompress_kernel
 		bl	cache_clean_flush
 		bl	cache_off
-		mov	r1, r7			@ restore architecture number
-		mov	r2, r8			@ restore atags pointer
 
 #ifdef CONFIG_ARM_VIRT_EXT
 		mrs	r0, spsr		@ Get saved CPU boot mode
@@ -1297,7 +1295,7 @@ phex:		adr	r3, phexbuf
 		b	1b
 
 @ puts corrupts {r0, r1, r2, r3}
-puts:		loadsp	r3, r1
+puts:		loadsp	r3, r2, r1
 1:		ldrb	r2, [r0], #1
 		teq	r2, #0
 		moveq	pc, lr
@@ -1314,8 +1312,8 @@ puts:		loadsp	r3, r1
 @ putc corrupts {r0, r1, r2, r3}
 putc:
 		mov	r2, r0
+		loadsp	r3, r1, r0
 		mov	r0, #0
-		loadsp	r3, r1
 		b	2b
 
 @ memdump corrupts {r0, r1, r2, r3, r10, r11, r12, lr}
@@ -1365,6 +1363,8 @@ __hyp_reentry_vectors:
 
 __enter_kernel:
 		mov	r0, #0			@ must be 0
+		mov	r1, r7			@ restore architecture number
+		mov	r2, r8			@ restore atags pointer
  ARM(		mov	pc, r4		)	@ call kernel
  M_CLASS(	add	r4, r4, #1	)	@ enter in Thumb mode for M class
  THUMB(		bx	r4		)	@ entry point is always ARM for A/R classes

arch/arm/boot/dts/bcm-cygnus.dtsi

@@ -69,7 +69,7 @@
 		timer@20200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0x20200 0x100>;
-			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
 			clocks = <&periph_clk>;
 		};
 

arch/arm/boot/dts/da850-lcdk.dts

@@ -21,8 +21,8 @@
 		stdout-path = "serial2:115200n8";
 	};
 
-	memory {
-		device_type = "memory";
+	memory@c0000000 {
+		/* 128 MB DDR2 SDRAM @ 0xc0000000 */
 		reg = <0xc0000000 0x08000000>;
 	};
 

arch/arm/boot/dts/da850.dtsi

@@ -7,10 +7,19 @@
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
-#include "skeleton.dtsi"
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
+	aliases { };
+
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xc0000000 0x0>;
+	};
+
 	arm {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -46,8 +55,6 @@
 		pmx_core: pinmux@14120 {
 			compatible = "pinctrl-single";
 			reg = <0x14120 0x50>;
-			#address-cells = <1>;
-			#size-cells = <0>;
 			#pinctrl-cells = <2>;
 			pinctrl-single,bit-per-mux;
 			pinctrl-single,register-width = <32>;

arch/arm/boot/dts/dm8148-evm.dts

@@ -10,7 +10,7 @@
 
 / {
 	model = "DM8148 EVM";
-	compatible = "ti,dm8148-evm", "ti,dm8148";
+	compatible = "ti,dm8148-evm", "ti,dm8148", "ti,dm814";
 
 	memory@80000000 {
 		device_type = "memory";

arch/arm/boot/dts/dm8148-t410.dts

@@ -9,7 +9,7 @@
 
 / {
 	model = "HP t410 Smart Zero Client";
-	compatible = "hp,t410", "ti,dm8148";
+	compatible = "hp,t410", "ti,dm8148", "ti,dm814";
 
 	memory@80000000 {
 		device_type = "memory";

arch/arm/boot/dts/dm8168-evm.dts

@@ -10,7 +10,7 @@
 
 / {
 	model = "DM8168 EVM";
-	compatible = "ti,dm8168-evm", "ti,dm8168";
+	compatible = "ti,dm8168-evm", "ti,dm8168", "ti,dm816";
 
 	memory@80000000 {
 		device_type = "memory";

arch/arm/boot/dts/dra62x-j5eco-evm.dts

@@ -10,7 +10,7 @@
 
 / {
 	model = "DRA62x J5 Eco EVM";
-	compatible = "ti,dra62x-j5eco-evm", "ti,dra62x", "ti,dm8148";
+	compatible = "ti,dra62x-j5eco-evm", "ti,dra62x", "ti,dm8148", "ti,dm814";
 
 	memory@80000000 {
 		device_type = "memory";

arch/arm/boot/dts/imx51-zii-rdu1.dts

@@ -523,7 +523,7 @@
 	};
 
 	touchscreen@20 {
-		compatible = "syna,rmi4_i2c";
+		compatible = "syna,rmi4-i2c";
 		reg = <0x20>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_ts>;
@@ -541,8 +541,8 @@
 
 		rmi4-f11@11 {
 			reg = <0x11>;
-			touch-inverted-y;
-			touch-swapped-x-y;
+			touchscreen-inverted-y;
+			touchscreen-swapped-x-y;
 			syna,sensor-type = <1>;
 		};
 	};

arch/arm/boot/dts/imx7s.dtsi

@@ -868,6 +868,7 @@
 
 			crypto: caam@30900000 {
 				compatible = "fsl,sec-v4.0";
+				fsl,sec-era = <8>;
 				#address-cells = <1>;
 				#size-cells = <1>;
 				reg = <0x30900000 0x40000>;

arch/arm/boot/dts/logicpd-som-lv.dtsi

@@ -26,7 +26,7 @@
 		gpio = <&gpio1 3 0>;   /* gpio_3 */
 		startup-delay-us = <70000>;
 		enable-active-high;
-		vin-supply = <&vmmc2>;
+		vin-supply = <&vaux3>;
 	};
 
 	/* HS USB Host PHY on PORT 1 */
@@ -82,6 +82,7 @@
 		twl_audio: audio {
 			compatible = "ti,twl4030-audio";
 			codec {
+				ti,hs_extmute_gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>;
 			};
 		};
 	};
@@ -199,6 +200,7 @@
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)        /* i2c1_scl.i2c1_scl */
 			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)        /* i2c1_sda.i2c1_sda */
+			OMAP3_CORE1_IOPAD(0x20ba, PIN_OUTPUT | MUX_MODE4)        /* gpmc_ncs6.gpio_57 */
 		>;
 	};
 };
@@ -213,7 +215,7 @@
 	};
 	wl127x_gpio: pinmux_wl127x_gpio_pin {
 		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a0c, PIN_INPUT | MUX_MODE4)		/* sys_boot0.gpio_2 */
+			OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT | MUX_MODE4)		/* sys_boot0.gpio_2 */
 			OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4)	/* sys_boot1.gpio_3 */
 		>;
 	};
@@ -260,6 +262,11 @@
 #include "twl4030.dtsi"
 #include "twl4030_omap3.dtsi"
 
+&vaux3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
+
 &twl {
 	twl_power: power {
 		compatible = "ti,twl4030-power-idle-osc-off", "ti,twl4030-power-idle";

arch/arm/boot/dts/r8a7790-lager.dts

@@ -379,7 +379,7 @@
 				port@0 {
 					reg = <0>;
 					adv7511_in: endpoint {
-						remote-endpoint = <&du_out_lvds0>;
+						remote-endpoint = <&lvds0_out>;
 					};
 				};
 
@@ -467,10 +467,8 @@
 	status = "okay";
 
 	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>,
-		 <&cpg CPG_MOD 726>, <&cpg CPG_MOD 725>,
 		 <&x13_clk>, <&x2_clk>;
-	clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1",
-		      "dclkin.0", "dclkin.1";
+	clock-names = "du.0", "du.1", "du.2", "dclkin.0", "dclkin.1";
 
 	ports {
 		port@0 {
@@ -478,12 +476,26 @@
 				remote-endpoint = <&adv7123_in>;
 			};
 		};
+	};
+};
+
+&lvds0 {
+	status = "okay";
+
+	ports {
 		port@1 {
 			endpoint {
 				remote-endpoint = <&adv7511_in>;
 			};
 		};
-		port@2 {
+	};
+};
+
+&lvds1 {
+	status = "okay";
+
+	ports {
+		port@1 {
 			lvds_connector: endpoint {
 			};
 		};

arch/arm/boot/dts/r8a7790.dtsi

@@ -1627,18 +1627,13 @@
 
 		du: display@feb00000 {
 			compatible = "renesas,du-r8a7790";
-			reg = <0 0xfeb00000 0 0x70000>,
-			      <0 0xfeb90000 0 0x1c>,
-			      <0 0xfeb94000 0 0x1c>;
-			reg-names = "du", "lvds.0", "lvds.1";
+			reg = <0 0xfeb00000 0 0x70000>;
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
-				 <&cpg CPG_MOD 722>, <&cpg CPG_MOD 726>,
-				 <&cpg CPG_MOD 725>;
-			clock-names = "du.0", "du.1", "du.2", "lvds.0",
-				      "lvds.1";
+				 <&cpg CPG_MOD 722>;
+			clock-names = "du.0", "du.1", "du.2";
 			status = "disabled";
 
 			ports {
@@ -1653,11 +1648,65 @@
 				port@1 {
 					reg = <1>;
 					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
 					};
 				};
 				port@2 {
 					reg = <2>;
 					du_out_lvds1: endpoint {
+						remote-endpoint = <&lvds1_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds@feb90000 {
+			compatible = "renesas,r8a7790-lvds";
+			reg = <0 0xfeb90000 0 0x1c>;
+			clocks = <&cpg CPG_MOD 726>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 726>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint = <&du_out_lvds0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					lvds0_out: endpoint {
+					};
+				};
+			};
+		};
+
+		lvds1: lvds@feb94000 {
+			compatible = "renesas,r8a7790-lvds";
+			reg = <0 0xfeb94000 0 0x1c>;
+			clocks = <&cpg CPG_MOD 725>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 725>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds1_in: endpoint {
+						remote-endpoint = <&du_out_lvds1>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					lvds1_out: endpoint {
 					};
 				};
 			};

arch/arm/boot/dts/r8a7791-koelsch.dts

@@ -468,10 +468,9 @@
 	pinctrl-names = "default";
 	status = "okay";
 
-	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 726>,
+	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
 		 <&x13_clk>, <&x2_clk>;
-	clock-names = "du.0", "du.1", "lvds.0",
-		      "dclkin.0", "dclkin.1";
+	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
 
 	ports {
 		port@0 {
@@ -479,6 +478,13 @@
 				remote-endpoint = <&adv7511_in>;
 			};
 		};
+	};
+};
+
+&lvds0 {
+	status = "okay";
+
+	ports {
 		port@1 {
 			lvds_connector: endpoint {
 			};

arch/arm/boot/dts/r8a7791-porter.dts

@@ -441,10 +441,9 @@
 	pinctrl-names = "default";
 	status = "okay";
 
-	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 726>,
+	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
 		 <&x3_clk>, <&x16_clk>;
-	clock-names = "du.0", "du.1", "lvds.0",
-		      "dclkin.0", "dclkin.1";
+	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
 
 	ports {
 		port@0 {
@@ -455,6 +454,17 @@
 	};
 };
 
+&lvds0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			lvds_connector: endpoint {
+			};
+		};
+	};
+};
+
 &rcar_sound {
 	pinctrl-0 = <&ssi_pins &audio_clk_pins>;
 	pinctrl-names = "default";

arch/arm/boot/dts/r8a7791.dtsi

@@ -1633,15 +1633,12 @@
 
 		du: display@feb00000 {
 			compatible = "renesas,du-r8a7791";
-			reg = <0 0xfeb00000 0 0x40000>,
-			      <0 0xfeb90000 0 0x1c>;
-			reg-names = "du", "lvds.0";
+			reg = <0 0xfeb00000 0 0x40000>;
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 724>,
-				 <&cpg CPG_MOD 723>,
-				 <&cpg CPG_MOD 726>;
-			clock-names = "du.0", "du.1", "lvds.0";
+				 <&cpg CPG_MOD 723>;
+			clock-names = "du.0", "du.1";
 			status = "disabled";
 
 			ports {
@@ -1656,6 +1653,33 @@
 				port@1 {
 					reg = <1>;
 					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds@feb90000 {
+			compatible = "renesas,r8a7791-lvds";
+			reg = <0 0xfeb90000 0 0x1c>;
+			clocks = <&cpg CPG_MOD 726>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 726>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint = <&du_out_lvds0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					lvds0_out: endpoint {
 					};
 				};
 			};

arch/arm/boot/dts/r8a7793-gose.dts

@@ -447,10 +447,9 @@
 	pinctrl-names = "default";
 	status = "okay";
 
-	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 726>,
+	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
 		 <&x13_clk>, <&x2_clk>;
-	clock-names = "du.0", "du.1", "lvds.0",
-		      "dclkin.0", "dclkin.1";
+	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
 
 	ports {
 		port@0 {
@@ -458,6 +457,11 @@
 				remote-endpoint = <&adv7511_in>;
 			};
 		};
+	};
+};
+
+&lvds0 {
+	ports {
 		port@1 {
 			lvds_connector: endpoint {
 			};

arch/arm/boot/dts/r8a7793.dtsi

@@ -1292,15 +1292,12 @@
 
 		du: display@feb00000 {
 			compatible = "renesas,du-r8a7793";
-			reg = <0 0xfeb00000 0 0x40000>,
-			      <0 0xfeb90000 0 0x1c>;
-			reg-names = "du", "lvds.0";
+			reg = <0 0xfeb00000 0 0x40000>;
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 724>,
-				 <&cpg CPG_MOD 723>,
-				 <&cpg CPG_MOD 726>;
-			clock-names = "du.0", "du.1", "lvds.0";
+				 <&cpg CPG_MOD 723>;
+			clock-names = "du.0", "du.1";
 			status = "disabled";
 
 			ports {
@@ -1315,6 +1312,34 @@
 				port@1 {
 					reg = <1>;
 					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds@feb90000 {
+			compatible = "renesas,r8a7793-lvds";
+			reg = <0 0xfeb90000 0 0x1c>;
+			clocks = <&cpg CPG_MOD 726>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 726>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint = <&du_out_lvds0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					lvds0_out: endpoint {
 					};
 				};
 			};

arch/arm/boot/dts/tegra20.dtsi

@@ -741,7 +741,7 @@
 		phy_type = "ulpi";
 		clocks = <&tegra_car TEGRA20_CLK_USB2>,
 			 <&tegra_car TEGRA20_CLK_PLL_U>,
-			 <&tegra_car TEGRA20_CLK_PLL_P_OUT4>;
+			 <&tegra_car TEGRA20_CLK_CDEV2>;
 		clock-names = "reg", "pll_u", "ulpi-link";
 		resets = <&tegra_car 58>, <&tegra_car 22>;
 		reset-names = "usb", "utmi-pads";

arch/arm/include/asm/assembler.h

@@ -536,4 +536,14 @@ THUMB(	orr	\reg , \reg , #PSR_T_BIT	)
 #endif
 	.endm
 
+#ifdef CONFIG_KPROBES
+#define _ASM_NOKPROBE(entry)				\
+	.pushsection "_kprobe_blacklist", "aw" ;	\
+	.balign 4 ;					\
+	.long entry;					\
+	.popsection
+#else
+#define _ASM_NOKPROBE(entry)
+#endif
+
 #endif /* __ASM_ASSEMBLER_H__ */

arch/arm/include/asm/kvm_mmu.h

@@ -309,6 +309,22 @@ static inline unsigned int kvm_get_vmid_bits(void)
 	return 8;
 }
 
+/*
+ * We are not in the kvm->srcu critical section most of the time, so we take
+ * the SRCU read lock here. Since we copy the data from the user page, we
+ * can immediately drop the lock again.
+ */
+static inline int kvm_read_guest_lock(struct kvm *kvm,
+				      gpa_t gpa, void *data, unsigned long len)
+{
+	int srcu_idx = srcu_read_lock(&kvm->srcu);
+	int ret = kvm_read_guest(kvm, gpa, data, len);
+
+	srcu_read_unlock(&kvm->srcu, srcu_idx);
+
+	return ret;
+}
+
 static inline void *kvm_get_hyp_vector(void)
 {
 	return kvm_ksym_ref(__kvm_hyp_vector);

arch/arm/include/uapi/asm/siginfo.h

@@ -1,13 +0,0 @@
-#ifndef __ASM_SIGINFO_H
-#define __ASM_SIGINFO_H
-
-#include <asm-generic/siginfo.h>
-
-/*
- * SIGFPE si_codes
- */
-#ifdef __KERNEL__
-#define FPE_FIXME	0	/* Broken dup of SI_USER */
-#endif /* __KERNEL__ */
-
-#endif

arch/arm/kernel/machine_kexec.c

@@ -83,7 +83,7 @@ void machine_crash_nonpanic_core(void *unused)
 {
 	struct pt_regs regs;
 
-	crash_setup_regs(&regs, NULL);
+	crash_setup_regs(&regs, get_irq_regs());
 	printk(KERN_DEBUG "CPU %u will stop doing anything useful since another CPU has crashed\n",
 	       smp_processor_id());
 	crash_save_cpu(&regs, smp_processor_id());
@@ -95,6 +95,27 @@ void machine_crash_nonpanic_core(void *unused)
 		cpu_relax();
 }
 
+void crash_smp_send_stop(void)
+{
+	static int cpus_stopped;
+	unsigned long msecs;
+
+	if (cpus_stopped)
+		return;
+
+	atomic_set(&waiting_for_crash_ipi, num_online_cpus() - 1);
+	smp_call_function(machine_crash_nonpanic_core, NULL, false);
+	msecs = 1000; /* Wait at most a second for the other cpus to stop */
+	while ((atomic_read(&waiting_for_crash_ipi) > 0) && msecs) {
+		mdelay(1);
+		msecs--;
+	}
+	if (atomic_read(&waiting_for_crash_ipi) > 0)
+		pr_warn("Non-crashing CPUs did not react to IPI\n");
+
+	cpus_stopped = 1;
+}
+
 static void machine_kexec_mask_interrupts(void)
 {
 	unsigned int i;
@@ -120,19 +141,8 @@ static void machine_kexec_mask_interrupts(void)
 
 void machine_crash_shutdown(struct pt_regs *regs)
 {
-	unsigned long msecs;
-
 	local_irq_disable();
-
-	atomic_set(&waiting_for_crash_ipi, num_online_cpus() - 1);
-	smp_call_function(machine_crash_nonpanic_core, NULL, false);
-	msecs = 1000; /* Wait at most a second for the other cpus to stop */
-	while ((atomic_read(&waiting_for_crash_ipi) > 0) && msecs) {
-		mdelay(1);
-		msecs--;
-	}
-	if (atomic_read(&waiting_for_crash_ipi) > 0)
-		pr_warn("Non-crashing CPUs did not react to IPI\n");
+	crash_smp_send_stop();
 
 	crash_save_cpu(regs, smp_processor_id());
 	machine_kexec_mask_interrupts();

arch/arm/kernel/traps.c

@@ -19,6 +19,7 @@
 #include <linux/uaccess.h>
 #include <linux/hardirq.h>
 #include <linux/kdebug.h>
+#include <linux/kprobes.h>
 #include <linux/module.h>
 #include <linux/kexec.h>
 #include <linux/bug.h>
@@ -417,7 +418,8 @@ void unregister_undef_hook(struct undef_hook *hook)
 	raw_spin_unlock_irqrestore(&undef_lock, flags);
 }
 
-static int call_undef_hook(struct pt_regs *regs, unsigned int instr)
+static nokprobe_inline
+int call_undef_hook(struct pt_regs *regs, unsigned int instr)
 {
 	struct undef_hook *hook;
 	unsigned long flags;
@@ -490,6 +492,7 @@ die_sig:
 
 	arm_notify_die("Oops - undefined instruction", regs, &info, 0, 6);
 }
+NOKPROBE_SYMBOL(do_undefinstr)
 
 /*
  * Handle FIQ similarly to NMI on x86 systems.

arch/arm/lib/getuser.S

@@ -38,6 +38,7 @@ ENTRY(__get_user_1)
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_1)
+_ASM_NOKPROBE(__get_user_1)
 
 ENTRY(__get_user_2)
 	check_uaccess r0, 2, r1, r2, __get_user_bad
@@ -58,6 +59,7 @@ rb	.req	r0
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_2)
+_ASM_NOKPROBE(__get_user_2)
 
 ENTRY(__get_user_4)
 	check_uaccess r0, 4, r1, r2, __get_user_bad
@@ -65,6 +67,7 @@ ENTRY(__get_user_4)
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_4)
+_ASM_NOKPROBE(__get_user_4)
 
 ENTRY(__get_user_8)
 	check_uaccess r0, 8, r1, r2, __get_user_bad8
@@ -78,6 +81,7 @@ ENTRY(__get_user_8)
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_8)
+_ASM_NOKPROBE(__get_user_8)
 
 #ifdef __ARMEB__
 ENTRY(__get_user_32t_8)
@@ -91,6 +95,7 @@ ENTRY(__get_user_32t_8)
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_32t_8)
+_ASM_NOKPROBE(__get_user_32t_8)
 
 ENTRY(__get_user_64t_1)
 	check_uaccess r0, 1, r1, r2, __get_user_bad8
@@ -98,6 +103,7 @@ ENTRY(__get_user_64t_1)
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_64t_1)
+_ASM_NOKPROBE(__get_user_64t_1)
 
 ENTRY(__get_user_64t_2)
 	check_uaccess r0, 2, r1, r2, __get_user_bad8
@@ -114,6 +120,7 @@ rb	.req	r0
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_64t_2)
+_ASM_NOKPROBE(__get_user_64t_2)
 
 ENTRY(__get_user_64t_4)
 	check_uaccess r0, 4, r1, r2, __get_user_bad8
@@ -121,6 +128,7 @@ ENTRY(__get_user_64t_4)
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_64t_4)
+_ASM_NOKPROBE(__get_user_64t_4)
 #endif
 
 __get_user_bad8:
@@ -131,6 +139,8 @@ __get_user_bad:
 	ret	lr
 ENDPROC(__get_user_bad)
 ENDPROC(__get_user_bad8)
+_ASM_NOKPROBE(__get_user_bad)
+_ASM_NOKPROBE(__get_user_bad8)
 
 .pushsection __ex_table, "a"
 	.long	1b, __get_user_bad

arch/arm/mach-davinci/board-da830-evm.c

@@ -205,12 +205,17 @@ static const short da830_evm_mmc_sd_pins[] = {
 	-1
 };
 
+#define DA830_MMCSD_WP_PIN		GPIO_TO_PIN(2, 1)
+#define DA830_MMCSD_CD_PIN		GPIO_TO_PIN(2, 2)
+
 static struct gpiod_lookup_table mmc_gpios_table = {
 	.dev_id = "da830-mmc.0",
 	.table = {
 		/* gpio chip 1 contains gpio range 32-63 */
-		GPIO_LOOKUP("davinci_gpio.1", 2, "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("davinci_gpio.1", 1, "wp", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("davinci_gpio.0", DA830_MMCSD_CD_PIN, "cd",
+			    GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("davinci_gpio.0", DA830_MMCSD_WP_PIN, "wp",
+			    GPIO_ACTIVE_LOW),
 	},
 };
 

arch/arm/mach-davinci/board-da850-evm.c

@@ -763,12 +763,17 @@ static const short da850_evm_mcasp_pins[] __initconst = {
 	-1
 };
 
+#define DA850_MMCSD_CD_PIN		GPIO_TO_PIN(4, 0)
+#define DA850_MMCSD_WP_PIN		GPIO_TO_PIN(4, 1)
+
 static struct gpiod_lookup_table mmc_gpios_table = {
 	.dev_id = "da830-mmc.0",
 	.table = {
 		/* gpio chip 2 contains gpio range 64-95 */
-		GPIO_LOOKUP("davinci_gpio.2", 0, "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("davinci_gpio.2", 1, "wp", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("davinci_gpio.0", DA850_MMCSD_CD_PIN, "cd",
+			    GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("davinci_gpio.0", DA850_MMCSD_WP_PIN, "wp",
+			    GPIO_ACTIVE_LOW),
 	},
 };
 

arch/arm/mach-davinci/board-dm355-evm.c

@@ -19,6 +19,7 @@
 #include <linux/gpio.h>
 #include <linux/gpio/machine.h>
 #include <linux/clk.h>
+#include <linux/dm9000.h>
 #include <linux/videodev2.h>
 #include <media/i2c/tvp514x.h>
 #include <linux/spi/spi.h>
@@ -109,12 +110,15 @@ static struct platform_device davinci_nand_device = {
 	},
 };
 
+#define DM355_I2C_SDA_PIN	GPIO_TO_PIN(0, 15)
+#define DM355_I2C_SCL_PIN	GPIO_TO_PIN(0, 14)
+
 static struct gpiod_lookup_table i2c_recovery_gpiod_table = {
-	.dev_id = "i2c_davinci",
+	.dev_id = "i2c_davinci.1",
 	.table = {
-		GPIO_LOOKUP("davinci_gpio", 15, "sda",
+		GPIO_LOOKUP("davinci_gpio.0", DM355_I2C_SDA_PIN, "sda",
 			    GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-		GPIO_LOOKUP("davinci_gpio", 14, "scl",
+		GPIO_LOOKUP("davinci_gpio.0", DM355_I2C_SCL_PIN, "scl",
 			    GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
 	},
 };
@@ -179,11 +183,16 @@ static struct resource dm355evm_dm9000_rsrc[] = {
 	},
 };
 
+static struct dm9000_plat_data dm335evm_dm9000_platdata;
+
 static struct platform_device dm355evm_dm9000 = {
 	.name		= "dm9000",
 	.id		= -1,
 	.resource	= dm355evm_dm9000_rsrc,
 	.num_resources	= ARRAY_SIZE(dm355evm_dm9000_rsrc),
+	.dev		= {
+		.platform_data = &dm335evm_dm9000_platdata,
+	},
 };
 
 static struct tvp514x_platform_data tvp5146_pdata = {

arch/arm/mach-davinci/board-dm644x-evm.c

@@ -17,6 +17,7 @@
 #include <linux/i2c.h>
 #include <linux/platform_data/pcf857x.h>
 #include <linux/platform_data/at24.h>
+#include <linux/platform_data/gpio-davinci.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/rawnand.h>
 #include <linux/mtd/partitions.h>
@@ -596,12 +597,15 @@ static struct i2c_board_info __initdata i2c_info[] =  {
 	},
 };
 
+#define DM644X_I2C_SDA_PIN	GPIO_TO_PIN(2, 12)
+#define DM644X_I2C_SCL_PIN	GPIO_TO_PIN(2, 11)
+
 static struct gpiod_lookup_table i2c_recovery_gpiod_table = {
-	.dev_id = "i2c_davinci",
+	.dev_id = "i2c_davinci.1",
 	.table = {
-		GPIO_LOOKUP("davinci_gpio", 44, "sda",
+		GPIO_LOOKUP("davinci_gpio.0", DM644X_I2C_SDA_PIN, "sda",
 			    GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-		GPIO_LOOKUP("davinci_gpio", 43, "scl",
+		GPIO_LOOKUP("davinci_gpio.0", DM644X_I2C_SCL_PIN, "scl",
 			    GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
 	},
 };

arch/arm/mach-davinci/board-dm646x-evm.c

@@ -532,11 +532,12 @@ static struct vpif_display_config dm646x_vpif_display_config = {
 	.set_clock	= set_vpif_clock,
 	.subdevinfo	= dm646x_vpif_subdev,
 	.subdev_count	= ARRAY_SIZE(dm646x_vpif_subdev),
+	.i2c_adapter_id = 1,
 	.chan_config[0] = {
 		.outputs = dm6467_ch0_outputs,
 		.output_count = ARRAY_SIZE(dm6467_ch0_outputs),
 	},
-	.card_name	= "DM646x EVM",
+	.card_name	= "DM646x EVM Video Display",
 };
 
 /**
@@ -674,6 +675,7 @@ static struct vpif_capture_config dm646x_vpif_capture_cfg = {
 	.setup_input_channel_mode = setup_vpif_input_channel_mode,
 	.subdev_info = vpif_capture_sdev_info,
 	.subdev_count = ARRAY_SIZE(vpif_capture_sdev_info),
+	.i2c_adapter_id = 1,
 	.chan_config[0] = {
 		.inputs = dm6467_ch0_inputs,
 		.input_count = ARRAY_SIZE(dm6467_ch0_inputs),
@@ -694,6 +696,7 @@ static struct vpif_capture_config dm646x_vpif_capture_cfg = {
 			.fid_pol = 0,
 		},
 	},
+	.card_name = "DM646x EVM Video Capture",
 };
 
 static void __init evm_init_video(void)

arch/arm/mach-davinci/board-omapl138-hawk.c

@@ -123,12 +123,16 @@ static const short hawk_mmcsd0_pins[] = {
 	-1
 };
 
+#define DA850_HAWK_MMCSD_CD_PIN		GPIO_TO_PIN(3, 12)
+#define DA850_HAWK_MMCSD_WP_PIN		GPIO_TO_PIN(3, 13)
+
 static struct gpiod_lookup_table mmc_gpios_table = {
 	.dev_id = "da830-mmc.0",
 	.table = {
-		/* CD: gpio3_12: gpio60: chip 1 contains gpio range 32-63*/
-		GPIO_LOOKUP("davinci_gpio.0", 28, "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("davinci_gpio.0", 29, "wp", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("davinci_gpio.0", DA850_HAWK_MMCSD_CD_PIN, "cd",
+			    GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("davinci_gpio.0", DA850_HAWK_MMCSD_WP_PIN, "wp",
+			    GPIO_ACTIVE_LOW),
 	},
 };
 

arch/arm/mach-davinci/dm646x.c

@@ -488,7 +488,8 @@ static u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
 	[IRQ_DM646X_MCASP0TXINT]        = 7,
 	[IRQ_DM646X_MCASP0RXINT]        = 7,
 	[IRQ_DM646X_RESERVED_3]         = 7,
-	[IRQ_DM646X_MCASP1TXINT]        = 7,    /* clockevent */
+	[IRQ_DM646X_MCASP1TXINT]        = 7,
+	[IRQ_TINT0_TINT12]              = 7,    /* clockevent */
 	[IRQ_TINT0_TINT34]              = 7,    /* clocksource */
 	[IRQ_TINT1_TINT12]              = 7,    /* DSP timer */
 	[IRQ_TINT1_TINT34]              = 7,    /* system tick */

arch/arm/mach-keystone/pm_domain.c

@@ -29,6 +29,7 @@ static struct dev_pm_domain keystone_pm_domain = {
 
 static struct pm_clk_notifier_block platform_domain_notifier = {
 	.pm_domain = &keystone_pm_domain,
+	.con_ids = { NULL },
 };
 
 static const struct of_device_id of_keystone_table[] = {

arch/arm/mach-omap1/ams-delta-fiq.c

@@ -58,22 +58,24 @@ static irqreturn_t deferred_fiq(int irq, void *dev_id)
 		irq_num = gpio_to_irq(gpio);
 		fiq_count = fiq_buffer[FIQ_CNT_INT_00 + gpio];
 
-		while (irq_counter[gpio] < fiq_count) {
-			if (gpio != AMS_DELTA_GPIO_PIN_KEYBRD_CLK) {
-				struct irq_data *d = irq_get_irq_data(irq_num);
-
-				/*
-				 * It looks like handle_edge_irq() that
-				 * OMAP GPIO edge interrupts default to,
-				 * expects interrupt already unmasked.
-				 */
-				if (irq_chip && irq_chip->irq_unmask)
+		if (irq_counter[gpio] < fiq_count &&
+				gpio != AMS_DELTA_GPIO_PIN_KEYBRD_CLK) {
+			struct irq_data *d = irq_get_irq_data(irq_num);
+
+			/*
+			 * handle_simple_irq() that OMAP GPIO edge
+			 * interrupts default to since commit 80ac93c27441
+			 * requires interrupt already acked and unmasked.
+			 */
+			if (irq_chip) {
+				if (irq_chip->irq_ack)
+					irq_chip->irq_ack(d);
+				if (irq_chip->irq_unmask)
 					irq_chip->irq_unmask(d);
 			}
-			generic_handle_irq(irq_num);
-
-			irq_counter[gpio]++;
 		}
+		for (; irq_counter[gpio] < fiq_count; irq_counter[gpio]++)
+			generic_handle_irq(irq_num);
 	}
 	return IRQ_HANDLED;
 }

arch/arm/mach-omap2/powerdomain.c

@@ -188,7 +188,7 @@ static int _pwrdm_state_switch(struct powerdomain *pwrdm, int flag)
 				       ((prev & OMAP_POWERSTATE_MASK) << 0));
 			trace_power_domain_target_rcuidle(pwrdm->name,
 							  trace_state,
-							  smp_processor_id());
+							  raw_smp_processor_id());
 		}
 		break;
 	default:
@@ -518,7 +518,7 @@ int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
 	if (arch_pwrdm && arch_pwrdm->pwrdm_set_next_pwrst) {
 		/* Trace the pwrdm desired target state */
 		trace_power_domain_target_rcuidle(pwrdm->name, pwrst,
-						  smp_processor_id());
+						  raw_smp_processor_id());
 		/* Program the pwrdm desired target state */
 		ret = arch_pwrdm->pwrdm_set_next_pwrst(pwrdm, pwrst);
 	}

arch/arm/mm/dma-mapping.c

@@ -466,12 +466,6 @@ void __init dma_contiguous_early_fixup(phys_addr_t base, unsigned long size)
 void __init dma_contiguous_remap(void)
 {
 	int i;
-
-	if (!dma_mmu_remap_num)
-		return;
-
-	/* call flush_cache_all() since CMA area would be large enough */
-	flush_cache_all();
 	for (i = 0; i < dma_mmu_remap_num; i++) {
 		phys_addr_t start = dma_mmu_remap[i].base;
 		phys_addr_t end = start + dma_mmu_remap[i].size;
@@ -504,15 +498,7 @@ void __init dma_contiguous_remap(void)
 		flush_tlb_kernel_range(__phys_to_virt(start),
 				       __phys_to_virt(end));
 
-		/*
-		 * All the memory in CMA region will be on ZONE_MOVABLE.
-		 * If that zone is considered as highmem, the memory in CMA
-		 * region is also considered as highmem even if it's
-		 * physical address belong to lowmem. In this case,
-		 * re-mapping isn't required.
-		 */
-		if (!is_highmem_idx(ZONE_MOVABLE))
-			iotable_init(&map, 1);
+		iotable_init(&map, 1);
 	}
 }
 

arch/arm/probes/kprobes/opt-arm.c

@@ -165,13 +165,14 @@ optimized_callback(struct optimized_kprobe *op, struct pt_regs *regs)
 {
 	unsigned long flags;
 	struct kprobe *p = &op->kp;
-	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+	struct kprobe_ctlblk *kcb;
 
 	/* Save skipped registers */
 	regs->ARM_pc = (unsigned long)op->kp.addr;
 	regs->ARM_ORIG_r0 = ~0UL;
 
 	local_irq_save(flags);
+	kcb = get_kprobe_ctlblk();
 
 	if (kprobe_running()) {
 		kprobes_inc_nmissed_count(&op->kp);
@@ -191,6 +192,7 @@ optimized_callback(struct optimized_kprobe *op, struct pt_regs *regs)
 
 	local_irq_restore(flags);
 }
+NOKPROBE_SYMBOL(optimized_callback)
 
 int arch_prepare_optimized_kprobe(struct optimized_kprobe *op, struct kprobe *orig)
 {

arch/arm/vfp/vfpmodule.c

@@ -257,7 +257,7 @@ static void vfp_raise_exceptions(u32 exceptions, u32 inst, u32 fpscr, struct pt_
 
 	if (exceptions == VFP_EXCEPTION_ERROR) {
 		vfp_panic("unhandled bounce", inst);
-		vfp_raise_sigfpe(FPE_FIXME, regs);
+		vfp_raise_sigfpe(FPE_FLTINV, regs);
 		return;
 	}
 

arch/arm64/boot/dts/exynos/exynos5433.dtsi

@@ -1317,7 +1317,7 @@
 			reg = <0x14d60000 0x100>;
 			dmas = <&pdma0 31 &pdma0 30>;
 			dma-names = "tx", "rx";
-			interrupts = <GIC_SPI 435 IRQ_TYPE_NONE>;
+			interrupts = <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu_peric CLK_PCLK_I2S1>,
 				 <&cmu_peric CLK_PCLK_I2S1>,
 				 <&cmu_peric CLK_SCLK_I2S1>;

arch/arm64/boot/dts/marvell/armada-cp110.dtsi

@@ -38,9 +38,10 @@
 			compatible = "marvell,armada-7k-pp22";
 			reg = <0x0 0x100000>, <0x129000 0xb000>;
 			clocks = <&CP110_LABEL(clk) 1 3>, <&CP110_LABEL(clk) 1 9>,
-				 <&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 18>;
+				 <&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 6>,
+				 <&CP110_LABEL(clk) 1 18>;
 			clock-names = "pp_clk", "gop_clk",
-				      "mg_clk", "axi_clk";
+				      "mg_clk", "mg_core_clk", "axi_clk";
 			marvell,system-controller = <&CP110_LABEL(syscon0)>;
 			status = "disabled";
 			dma-coherent;
@@ -141,6 +142,8 @@
 			#size-cells = <0>;
 			compatible = "marvell,xmdio";
 			reg = <0x12a600 0x10>;
+			clocks = <&CP110_LABEL(clk) 1 5>,
+				 <&CP110_LABEL(clk) 1 6>, <&CP110_LABEL(clk) 1 18>;
 			status = "disabled";
 		};
 

arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi

@@ -46,7 +46,7 @@
 				compatible = "ethernet-phy-ieee802.3-c22";
 				reg = <0x0>;
 				interrupt-parent = <&gpio>;
-				interrupts = <TEGRA_MAIN_GPIO(M, 5) IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <TEGRA_MAIN_GPIO(M, 5) IRQ_TYPE_LEVEL_LOW>;
 			};
 		};
 	};

arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi

@@ -414,7 +414,7 @@
 			mmc-ddr-1_8v;
 			mmc-hs200-1_8v;
 			mmc-pwrseq = <&emmc_pwrseq>;
-			cdns,phy-input-delay-legacy = <4>;
+			cdns,phy-input-delay-legacy = <9>;
 			cdns,phy-input-delay-mmc-highspeed = <2>;
 			cdns,phy-input-delay-mmc-ddr = <3>;
 			cdns,phy-dll-delay-sdclk = <21>;

arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts

@@ -67,3 +67,11 @@
 		reg = <0>;
 	};
 };
+
+&pinctrl_ether_rgmii {
+	tx {
+		pins = "RGMII_TXCLK", "RGMII_TXD0", "RGMII_TXD1",
+		       "RGMII_TXD2", "RGMII_TXD3", "RGMII_TXCTL";
+		drive-strength = <9>;
+	};
+};

arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi

@@ -519,7 +519,7 @@
 			mmc-ddr-1_8v;
 			mmc-hs200-1_8v;
 			mmc-pwrseq = <&emmc_pwrseq>;
-			cdns,phy-input-delay-legacy = <4>;
+			cdns,phy-input-delay-legacy = <9>;
 			cdns,phy-input-delay-mmc-highspeed = <2>;
 			cdns,phy-input-delay-mmc-ddr = <3>;
 			cdns,phy-dll-delay-sdclk = <21>;

arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi

@@ -334,7 +334,7 @@
 			mmc-ddr-1_8v;
 			mmc-hs200-1_8v;
 			mmc-pwrseq = <&emmc_pwrseq>;
-			cdns,phy-input-delay-legacy = <4>;
+			cdns,phy-input-delay-legacy = <9>;
 			cdns,phy-input-delay-mmc-highspeed = <2>;
 			cdns,phy-input-delay-mmc-ddr = <3>;
 			cdns,phy-dll-delay-sdclk = <21>;

arch/arm64/include/asm/kvm_mmu.h

@@ -360,6 +360,22 @@ static inline unsigned int kvm_get_vmid_bits(void)
 	return (cpuid_feature_extract_unsigned_field(reg, ID_AA64MMFR1_VMIDBITS_SHIFT) == 2) ? 16 : 8;
 }
 
+/*
+ * We are not in the kvm->srcu critical section most of the time, so we take
+ * the SRCU read lock here. Since we copy the data from the user page, we
+ * can immediately drop the lock again.
+ */
+static inline int kvm_read_guest_lock(struct kvm *kvm,
+				      gpa_t gpa, void *data, unsigned long len)
+{
+	int srcu_idx = srcu_read_lock(&kvm->srcu);
+	int ret = kvm_read_guest(kvm, gpa, data, len);
+
+	srcu_read_unlock(&kvm->srcu, srcu_idx);
+
+	return ret;
+}
+
 #ifdef CONFIG_KVM_INDIRECT_VECTORS
 /*
  * EL2 vectors can be mapped and rerouted in a number of ways,

arch/mips/boot/compressed/uart-16550.c

@@ -18,9 +18,9 @@
 #define PORT(offset) (CKSEG1ADDR(AR7_REGS_UART0) + (4 * offset))
 #endif
 
-#if defined(CONFIG_MACH_JZ4740) || defined(CONFIG_MACH_JZ4780)
-#include <asm/mach-jz4740/base.h>
-#define PORT(offset) (CKSEG1ADDR(JZ4740_UART0_BASE_ADDR) + (4 * offset))
+#ifdef CONFIG_MACH_INGENIC
+#define INGENIC_UART0_BASE_ADDR	0x10030000
+#define PORT(offset) (CKSEG1ADDR(INGENIC_UART0_BASE_ADDR) + (4 * offset))
 #endif
 
 #ifdef CONFIG_CPU_XLR

arch/mips/boot/dts/xilfpga/Makefile

@@ -1,4 +1,2 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_FIT_IMAGE_FDT_XILFPGA)	+= nexys4ddr.dtb
-
-obj-y				+= $(patsubst %.dtb, %.dtb.o, $(dtb-y))

arch/mips/generic/Platform

@@ -16,3 +16,4 @@ all-$(CONFIG_MIPS_GENERIC)	:= vmlinux.gz.itb
 its-y					:= vmlinux.its.S
 its-$(CONFIG_FIT_IMAGE_FDT_BOSTON)	+= board-boston.its.S
 its-$(CONFIG_FIT_IMAGE_FDT_NI169445)	+= board-ni169445.its.S
+its-$(CONFIG_FIT_IMAGE_FDT_XILFPGA)	+= board-xilfpga.its.S

arch/mips/kernel/ptrace.c

@@ -463,7 +463,7 @@ static int fpr_get_msa(struct task_struct *target,
 /*
  * Copy the floating-point context to the supplied NT_PRFPREG buffer.
  * Choose the appropriate helper for general registers, and then copy
- * the FCSR register separately.
+ * the FCSR and FIR registers separately.
  */
 static int fpr_get(struct task_struct *target,
 		   const struct user_regset *regset,
@@ -471,6 +471,7 @@ static int fpr_get(struct task_struct *target,
 		   void *kbuf, void __user *ubuf)
 {
 	const int fcr31_pos = NUM_FPU_REGS * sizeof(elf_fpreg_t);
+	const int fir_pos = fcr31_pos + sizeof(u32);
 	int err;
 
 	if (sizeof(target->thread.fpu.fpr[0]) == sizeof(elf_fpreg_t))
@@ -483,6 +484,12 @@ static int fpr_get(struct task_struct *target,
 	err = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
 				  &target->thread.fpu.fcr31,
 				  fcr31_pos, fcr31_pos + sizeof(u32));
+	if (err)
+		return err;
+
+	err = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				  &boot_cpu_data.fpu_id,
+				  fir_pos, fir_pos + sizeof(u32));
 
 	return err;
 }
@@ -531,7 +538,8 @@ static int fpr_set_msa(struct task_struct *target,
 /*
  * Copy the supplied NT_PRFPREG buffer to the floating-point context.
  * Choose the appropriate helper for general registers, and then copy
- * the FCSR register separately.
+ * the FCSR register separately.  Ignore the incoming FIR register
+ * contents though, as the register is read-only.
  *
  * We optimize for the case where `count % sizeof(elf_fpreg_t) == 0',
  * which is supposed to have been guaranteed by the kernel before
@@ -545,6 +553,7 @@ static int fpr_set(struct task_struct *target,
 		   const void *kbuf, const void __user *ubuf)
 {
 	const int fcr31_pos = NUM_FPU_REGS * sizeof(elf_fpreg_t);
+	const int fir_pos = fcr31_pos + sizeof(u32);
 	u32 fcr31;
 	int err;
 
@@ -572,6 +581,11 @@ static int fpr_set(struct task_struct *target,
 		ptrace_setfcr31(target, fcr31);
 	}
 
+	if (count > 0)
+		err = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
+						fir_pos,
+						fir_pos + sizeof(u32));
+
 	return err;
 }
 
@@ -793,7 +807,7 @@ long arch_ptrace(struct task_struct *child, long request,
 			fregs = get_fpu_regs(child);
 
 #ifdef CONFIG_32BIT
-			if (test_thread_flag(TIF_32BIT_FPREGS)) {
+			if (test_tsk_thread_flag(child, TIF_32BIT_FPREGS)) {
 				/*
 				 * The odd registers are actually the high
 				 * order bits of the values stored in the even
@@ -888,7 +902,7 @@ long arch_ptrace(struct task_struct *child, long request,
 
 			init_fp_ctx(child);
 #ifdef CONFIG_32BIT
-			if (test_thread_flag(TIF_32BIT_FPREGS)) {
+			if (test_tsk_thread_flag(child, TIF_32BIT_FPREGS)) {
 				/*
 				 * The odd registers are actually the high
 				 * order bits of the values stored in the even

arch/mips/kernel/ptrace32.c

@@ -99,7 +99,7 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 				break;
 			}
 			fregs = get_fpu_regs(child);
-			if (test_thread_flag(TIF_32BIT_FPREGS)) {
+			if (test_tsk_thread_flag(child, TIF_32BIT_FPREGS)) {
 				/*
 				 * The odd registers are actually the high
 				 * order bits of the values stored in the even
@@ -212,7 +212,7 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 				       sizeof(child->thread.fpu));
 				child->thread.fpu.fcr31 = 0;
 			}
-			if (test_thread_flag(TIF_32BIT_FPREGS)) {
+			if (test_tsk_thread_flag(child, TIF_32BIT_FPREGS)) {
 				/*
 				 * The odd registers are actually the high
 				 * order bits of the values stored in the even

arch/mips/kvm/mips.c

@@ -45,7 +45,7 @@ struct kvm_stats_debugfs_item debugfs_entries[] = {
 	{ "cache",	  VCPU_STAT(cache_exits),	 KVM_STAT_VCPU },
 	{ "signal",	  VCPU_STAT(signal_exits),	 KVM_STAT_VCPU },
 	{ "interrupt",	  VCPU_STAT(int_exits),		 KVM_STAT_VCPU },
-	{ "cop_unsuable", VCPU_STAT(cop_unusable_exits), KVM_STAT_VCPU },
+	{ "cop_unusable", VCPU_STAT(cop_unusable_exits), KVM_STAT_VCPU },
 	{ "tlbmod",	  VCPU_STAT(tlbmod_exits),	 KVM_STAT_VCPU },
 	{ "tlbmiss_ld",	  VCPU_STAT(tlbmiss_ld_exits),	 KVM_STAT_VCPU },
 	{ "tlbmiss_st",	  VCPU_STAT(tlbmiss_st_exits),	 KVM_STAT_VCPU },

arch/mips/mm/c-r4k.c

@@ -851,9 +851,12 @@ static void r4k_dma_cache_wback_inv(unsigned long addr, unsigned long size)
 	/*
 	 * Either no secondary cache or the available caches don't have the
 	 * subset property so we have to flush the primary caches
-	 * explicitly
+	 * explicitly.
+	 * If we would need IPI to perform an INDEX-type operation, then
+	 * we have to use the HIT-type alternative as IPI cannot be used
+	 * here due to interrupts possibly being disabled.
 	 */
-	if (size >= dcache_size) {
+	if (!r4k_op_needs_ipi(R4K_INDEX) && size >= dcache_size) {
 		r4k_blast_dcache();
 	} else {
 		R4600_HIT_CACHEOP_WAR_IMPL;
@@ -890,7 +893,7 @@ static void r4k_dma_cache_inv(unsigned long addr, unsigned long size)
 		return;
 	}
 
-	if (size >= dcache_size) {
+	if (!r4k_op_needs_ipi(R4K_INDEX) && size >= dcache_size) {
 		r4k_blast_dcache();
 	} else {
 		R4600_HIT_CACHEOP_WAR_IMPL;

arch/parisc/kernel/drivers.c

@@ -268,7 +268,7 @@ static struct parisc_device *find_device_by_addr(unsigned long hpa)
  * Walks up the device tree looking for a device of the specified type.
  * If it finds it, it returns it.  If not, it returns NULL.
  */
-const struct parisc_device * __init
+const struct parisc_device *
 find_pa_parent_type(const struct parisc_device *padev, int type)
 {
 	const struct device *dev = &padev->dev;

arch/parisc/kernel/smp.c

@@ -423,8 +423,7 @@ int __cpu_up(unsigned int cpu, struct task_struct *tidle)
 }
 
 #ifdef CONFIG_PROC_FS
-int __init
-setup_profiling_timer(unsigned int multiplier)
+int setup_profiling_timer(unsigned int multiplier)
 {
 	return -EINVAL;
 }

arch/powerpc/include/asm/exception-64s.h

@@ -74,6 +74,27 @@
  */
 #define EX_R3		EX_DAR
 
+#define STF_ENTRY_BARRIER_SLOT						\
+	STF_ENTRY_BARRIER_FIXUP_SECTION;				\
+	nop;								\
+	nop;								\
+	nop
+
+#define STF_EXIT_BARRIER_SLOT						\
+	STF_EXIT_BARRIER_FIXUP_SECTION;					\
+	nop;								\
+	nop;								\
+	nop;								\
+	nop;								\
+	nop;								\
+	nop
+
+/*
+ * r10 must be free to use, r13 must be paca
+ */
+#define INTERRUPT_TO_KERNEL						\
+	STF_ENTRY_BARRIER_SLOT
+
 /*
  * Macros for annotating the expected destination of (h)rfid
  *
@@ -90,16 +111,19 @@
 	rfid
 
 #define RFI_TO_USER							\
+	STF_EXIT_BARRIER_SLOT;						\
 	RFI_FLUSH_SLOT;							\
 	rfid;								\
 	b	rfi_flush_fallback
 
 #define RFI_TO_USER_OR_KERNEL						\
+	STF_EXIT_BARRIER_SLOT;						\
 	RFI_FLUSH_SLOT;							\
 	rfid;								\
 	b	rfi_flush_fallback
 
 #define RFI_TO_GUEST							\
+	STF_EXIT_BARRIER_SLOT;						\
 	RFI_FLUSH_SLOT;							\
 	rfid;								\
 	b	rfi_flush_fallback
@@ -108,21 +132,25 @@
 	hrfid
 
 #define HRFI_TO_USER							\
+	STF_EXIT_BARRIER_SLOT;						\
 	RFI_FLUSH_SLOT;							\
 	hrfid;								\
 	b	hrfi_flush_fallback
 
 #define HRFI_TO_USER_OR_KERNEL						\
+	STF_EXIT_BARRIER_SLOT;						\
 	RFI_FLUSH_SLOT;							\
 	hrfid;								\
 	b	hrfi_flush_fallback
 
 #define HRFI_TO_GUEST							\
+	STF_EXIT_BARRIER_SLOT;						\
 	RFI_FLUSH_SLOT;							\
 	hrfid;								\
 	b	hrfi_flush_fallback
 
 #define HRFI_TO_UNKNOWN							\
+	STF_EXIT_BARRIER_SLOT;						\
 	RFI_FLUSH_SLOT;							\
 	hrfid;								\
 	b	hrfi_flush_fallback
@@ -254,6 +282,7 @@ END_FTR_SECTION_NESTED(ftr,ftr,943)
 #define __EXCEPTION_PROLOG_1_PRE(area)					\
 	OPT_SAVE_REG_TO_PACA(area+EX_PPR, r9, CPU_FTR_HAS_PPR);		\
 	OPT_SAVE_REG_TO_PACA(area+EX_CFAR, r10, CPU_FTR_CFAR);		\
+	INTERRUPT_TO_KERNEL;						\
 	SAVE_CTR(r10, area);						\
 	mfcr	r9;
 

arch/powerpc/include/asm/feature-fixups.h

@@ -187,6 +187,22 @@ label##3:					       	\
 	FTR_ENTRY_OFFSET label##1b-label##3b;		\
 	.popsection;
 
+#define STF_ENTRY_BARRIER_FIXUP_SECTION			\
+953:							\
+	.pushsection __stf_entry_barrier_fixup,"a";	\
+	.align 2;					\
+954:							\
+	FTR_ENTRY_OFFSET 953b-954b;			\
+	.popsection;
+
+#define STF_EXIT_BARRIER_FIXUP_SECTION			\
+955:							\
+	.pushsection __stf_exit_barrier_fixup,"a";	\
+	.align 2;					\
+956:							\
+	FTR_ENTRY_OFFSET 955b-956b;			\
+	.popsection;
+
 #define RFI_FLUSH_FIXUP_SECTION				\
 951:							\
 	.pushsection __rfi_flush_fixup,"a";		\
@@ -199,6 +215,9 @@ label##3:					       	\
 #ifndef __ASSEMBLY__
 #include <linux/types.h>
 
+extern long stf_barrier_fallback;
+extern long __start___stf_entry_barrier_fixup, __stop___stf_entry_barrier_fixup;
+extern long __start___stf_exit_barrier_fixup, __stop___stf_exit_barrier_fixup;
 extern long __start___rfi_flush_fixup, __stop___rfi_flush_fixup;
 
 void apply_feature_fixups(void);

arch/powerpc/include/asm/security_features.h

@@ -12,6 +12,17 @@
 extern unsigned long powerpc_security_features;
 extern bool rfi_flush;
 
+/* These are bit flags */
+enum stf_barrier_type {
+	STF_BARRIER_NONE	= 0x1,
+	STF_BARRIER_FALLBACK	= 0x2,
+	STF_BARRIER_EIEIO	= 0x4,
+	STF_BARRIER_SYNC_ORI	= 0x8,
+};
+
+void setup_stf_barrier(void);
+void do_stf_barrier_fixups(enum stf_barrier_type types);
+
 static inline void security_ftr_set(unsigned long feature)
 {
 	powerpc_security_features |= feature;

arch/powerpc/kernel/exceptions-64s.S

@@ -885,7 +885,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_TM)
 #endif
 
 
-EXC_REAL_MASKABLE(decrementer, 0x900, 0x80, IRQS_DISABLED)
+EXC_REAL_OOL_MASKABLE(decrementer, 0x900, 0x80, IRQS_DISABLED)
 EXC_VIRT_MASKABLE(decrementer, 0x4900, 0x80, 0x900, IRQS_DISABLED)
 TRAMP_KVM(PACA_EXGEN, 0x900)
 EXC_COMMON_ASYNC(decrementer_common, 0x900, timer_interrupt)
@@ -961,6 +961,7 @@ EXC_COMMON(trap_0b_common, 0xb00, unknown_exception)
 	mtctr	r13;							\
 	GET_PACA(r13);							\
 	std	r10,PACA_EXGEN+EX_R10(r13);				\
+	INTERRUPT_TO_KERNEL;						\
 	KVMTEST_PR(0xc00); /* uses r10, branch to do_kvm_0xc00_system_call */ \
 	HMT_MEDIUM;							\
 	mfctr	r9;
@@ -969,7 +970,8 @@ EXC_COMMON(trap_0b_common, 0xb00, unknown_exception)
 #define SYSCALL_KVMTEST							\
 	HMT_MEDIUM;							\
 	mr	r9,r13;							\
-	GET_PACA(r13);
+	GET_PACA(r13);							\
+	INTERRUPT_TO_KERNEL;
 #endif
 	
 #define LOAD_SYSCALL_HANDLER(reg)					\
@@ -1507,6 +1509,19 @@ masked_##_H##interrupt:					\
 	b	.;					\
 	MASKED_DEC_HANDLER(_H)
 
+TRAMP_REAL_BEGIN(stf_barrier_fallback)
+	std	r9,PACA_EXRFI+EX_R9(r13)
+	std	r10,PACA_EXRFI+EX_R10(r13)
+	sync
+	ld	r9,PACA_EXRFI+EX_R9(r13)
+	ld	r10,PACA_EXRFI+EX_R10(r13)
+	ori	31,31,0
+	.rept 14
+	b	1f
+1:
+	.endr
+	blr
+
 TRAMP_REAL_BEGIN(rfi_flush_fallback)
 	SET_SCRATCH0(r13);
 	GET_PACA(r13);

arch/powerpc/kernel/security.c

@@ -8,6 +8,7 @@
 #include <linux/device.h>
 #include <linux/seq_buf.h>
 
+#include <asm/debugfs.h>
 #include <asm/security_features.h>
 
 
@@ -86,3 +87,151 @@ ssize_t cpu_show_spectre_v2(struct device *dev, struct device_attribute *attr, c
 
 	return s.len;
 }
+
+/*
+ * Store-forwarding barrier support.
+ */
+
+static enum stf_barrier_type stf_enabled_flush_types;
+static bool no_stf_barrier;
+bool stf_barrier;
+
+static int __init handle_no_stf_barrier(char *p)
+{
+	pr_info("stf-barrier: disabled on command line.");
+	no_stf_barrier = true;
+	return 0;
+}
+
+early_param("no_stf_barrier", handle_no_stf_barrier);
+
+/* This is the generic flag used by other architectures */
+static int __init handle_ssbd(char *p)
+{
+	if (!p || strncmp(p, "auto", 5) == 0 || strncmp(p, "on", 2) == 0 ) {
+		/* Until firmware tells us, we have the barrier with auto */
+		return 0;
+	} else if (strncmp(p, "off", 3) == 0) {
+		handle_no_stf_barrier(NULL);
+		return 0;
+	} else
+		return 1;
+
+	return 0;
+}
+early_param("spec_store_bypass_disable", handle_ssbd);
+
+/* This is the generic flag used by other architectures */
+static int __init handle_no_ssbd(char *p)
+{
+	handle_no_stf_barrier(NULL);
+	return 0;
+}
+early_param("nospec_store_bypass_disable", handle_no_ssbd);
+
+static void stf_barrier_enable(bool enable)
+{
+	if (enable)
+		do_stf_barrier_fixups(stf_enabled_flush_types);
+	else
+		do_stf_barrier_fixups(STF_BARRIER_NONE);
+
+	stf_barrier = enable;
+}
+
+void setup_stf_barrier(void)
+{
+	enum stf_barrier_type type;
+	bool enable, hv;
+
+	hv = cpu_has_feature(CPU_FTR_HVMODE);
+
+	/* Default to fallback in case fw-features are not available */
+	if (cpu_has_feature(CPU_FTR_ARCH_300))
+		type = STF_BARRIER_EIEIO;
+	else if (cpu_has_feature(CPU_FTR_ARCH_207S))
+		type = STF_BARRIER_SYNC_ORI;
+	else if (cpu_has_feature(CPU_FTR_ARCH_206))
+		type = STF_BARRIER_FALLBACK;
+	else
+		type = STF_BARRIER_NONE;
+
+	enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) &&
+		(security_ftr_enabled(SEC_FTR_L1D_FLUSH_PR) ||
+		 (security_ftr_enabled(SEC_FTR_L1D_FLUSH_HV) && hv));
+
+	if (type == STF_BARRIER_FALLBACK) {
+		pr_info("stf-barrier: fallback barrier available\n");
+	} else if (type == STF_BARRIER_SYNC_ORI) {
+		pr_info("stf-barrier: hwsync barrier available\n");
+	} else if (type == STF_BARRIER_EIEIO) {
+		pr_info("stf-barrier: eieio barrier available\n");
+	}
+
+	stf_enabled_flush_types = type;
+
+	if (!no_stf_barrier)
+		stf_barrier_enable(enable);
+}
+
+ssize_t cpu_show_spec_store_bypass(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	if (stf_barrier && stf_enabled_flush_types != STF_BARRIER_NONE) {
+		const char *type;
+		switch (stf_enabled_flush_types) {
+		case STF_BARRIER_EIEIO:
+			type = "eieio";
+			break;
+		case STF_BARRIER_SYNC_ORI:
+			type = "hwsync";
+			break;
+		case STF_BARRIER_FALLBACK:
+			type = "fallback";
+			break;
+		default:
+			type = "unknown";
+		}
+		return sprintf(buf, "Mitigation: Kernel entry/exit barrier (%s)\n", type);
+	}
+
+	if (!security_ftr_enabled(SEC_FTR_L1D_FLUSH_HV) &&
+	    !security_ftr_enabled(SEC_FTR_L1D_FLUSH_PR))
+		return sprintf(buf, "Not affected\n");
+
+	return sprintf(buf, "Vulnerable\n");
+}
+
+#ifdef CONFIG_DEBUG_FS
+static int stf_barrier_set(void *data, u64 val)
+{
+	bool enable;
+
+	if (val == 1)
+		enable = true;
+	else if (val == 0)
+		enable = false;
+	else
+		return -EINVAL;
+
+	/* Only do anything if we're changing state */
+	if (enable != stf_barrier)
+		stf_barrier_enable(enable);
+
+	return 0;
+}
+
+static int stf_barrier_get(void *data, u64 *val)
+{
+	*val = stf_barrier ? 1 : 0;
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(fops_stf_barrier, stf_barrier_get, stf_barrier_set, "%llu\n");
+
+static __init int stf_barrier_debugfs_init(void)
+{
+	debugfs_create_file("stf_barrier", 0600, powerpc_debugfs_root, NULL, &fops_stf_barrier);
+	return 0;
+}
+device_initcall(stf_barrier_debugfs_init);
+#endif /* CONFIG_DEBUG_FS */

arch/powerpc/kernel/vmlinux.lds.S

@@ -133,6 +133,20 @@ SECTIONS
 	RO_DATA(PAGE_SIZE)
 
 #ifdef CONFIG_PPC64
+	. = ALIGN(8);
+	__stf_entry_barrier_fixup : AT(ADDR(__stf_entry_barrier_fixup) - LOAD_OFFSET) {
+		__start___stf_entry_barrier_fixup = .;
+		*(__stf_entry_barrier_fixup)
+		__stop___stf_entry_barrier_fixup = .;
+	}
+
+	. = ALIGN(8);
+	__stf_exit_barrier_fixup : AT(ADDR(__stf_exit_barrier_fixup) - LOAD_OFFSET) {
+		__start___stf_exit_barrier_fixup = .;
+		*(__stf_exit_barrier_fixup)
+		__stop___stf_exit_barrier_fixup = .;
+	}
+
 	. = ALIGN(8);
 	__rfi_flush_fixup : AT(ADDR(__rfi_flush_fixup) - LOAD_OFFSET) {
 		__start___rfi_flush_fixup = .;

arch/powerpc/lib/feature-fixups.c

@@ -23,6 +23,7 @@
 #include <asm/page.h>
 #include <asm/sections.h>
 #include <asm/setup.h>
+#include <asm/security_features.h>
 #include <asm/firmware.h>
 
 struct fixup_entry {
@@ -117,6 +118,120 @@ void do_feature_fixups(unsigned long value, void *fixup_start, void *fixup_end)
 }
 
 #ifdef CONFIG_PPC_BOOK3S_64
+void do_stf_entry_barrier_fixups(enum stf_barrier_type types)
+{
+	unsigned int instrs[3], *dest;
+	long *start, *end;
+	int i;
+
+	start = PTRRELOC(&__start___stf_entry_barrier_fixup),
+	end = PTRRELOC(&__stop___stf_entry_barrier_fixup);
+
+	instrs[0] = 0x60000000; /* nop */
+	instrs[1] = 0x60000000; /* nop */
+	instrs[2] = 0x60000000; /* nop */
+
+	i = 0;
+	if (types & STF_BARRIER_FALLBACK) {
+		instrs[i++] = 0x7d4802a6; /* mflr r10		*/
+		instrs[i++] = 0x60000000; /* branch patched below */
+		instrs[i++] = 0x7d4803a6; /* mtlr r10		*/
+	} else if (types & STF_BARRIER_EIEIO) {
+		instrs[i++] = 0x7e0006ac; /* eieio + bit 6 hint */
+	} else if (types & STF_BARRIER_SYNC_ORI) {
+		instrs[i++] = 0x7c0004ac; /* hwsync		*/
+		instrs[i++] = 0xe94d0000; /* ld r10,0(r13)	*/
+		instrs[i++] = 0x63ff0000; /* ori 31,31,0 speculation barrier */
+	}
+
+	for (i = 0; start < end; start++, i++) {
+		dest = (void *)start + *start;
+
+		pr_devel("patching dest %lx\n", (unsigned long)dest);
+
+		patch_instruction(dest, instrs[0]);
+
+		if (types & STF_BARRIER_FALLBACK)
+			patch_branch(dest + 1, (unsigned long)&stf_barrier_fallback,
+				     BRANCH_SET_LINK);
+		else
+			patch_instruction(dest + 1, instrs[1]);
+
+		patch_instruction(dest + 2, instrs[2]);
+	}
+
+	printk(KERN_DEBUG "stf-barrier: patched %d entry locations (%s barrier)\n", i,
+		(types == STF_BARRIER_NONE)                  ? "no" :
+		(types == STF_BARRIER_FALLBACK)              ? "fallback" :
+		(types == STF_BARRIER_EIEIO)                 ? "eieio" :
+		(types == (STF_BARRIER_SYNC_ORI))            ? "hwsync"
+		                                           : "unknown");
+}
+
+void do_stf_exit_barrier_fixups(enum stf_barrier_type types)
+{
+	unsigned int instrs[6], *dest;
+	long *start, *end;
+	int i;
+
+	start = PTRRELOC(&__start___stf_exit_barrier_fixup),
+	end = PTRRELOC(&__stop___stf_exit_barrier_fixup);
+
+	instrs[0] = 0x60000000; /* nop */
+	instrs[1] = 0x60000000; /* nop */
+	instrs[2] = 0x60000000; /* nop */
+	instrs[3] = 0x60000000; /* nop */
+	instrs[4] = 0x60000000; /* nop */
+	instrs[5] = 0x60000000; /* nop */
+
+	i = 0;
+	if (types & STF_BARRIER_FALLBACK || types & STF_BARRIER_SYNC_ORI) {
+		if (cpu_has_feature(CPU_FTR_HVMODE)) {
+			instrs[i++] = 0x7db14ba6; /* mtspr 0x131, r13 (HSPRG1) */
+			instrs[i++] = 0x7db04aa6; /* mfspr r13, 0x130 (HSPRG0) */
+		} else {
+			instrs[i++] = 0x7db243a6; /* mtsprg 2,r13	*/
+			instrs[i++] = 0x7db142a6; /* mfsprg r13,1    */
+	        }
+		instrs[i++] = 0x7c0004ac; /* hwsync		*/
+		instrs[i++] = 0xe9ad0000; /* ld r13,0(r13)	*/
+		instrs[i++] = 0x63ff0000; /* ori 31,31,0 speculation barrier */
+		if (cpu_has_feature(CPU_FTR_HVMODE)) {
+			instrs[i++] = 0x7db14aa6; /* mfspr r13, 0x131 (HSPRG1) */
+		} else {
+			instrs[i++] = 0x7db242a6; /* mfsprg r13,2 */
+		}
+	} else if (types & STF_BARRIER_EIEIO) {
+		instrs[i++] = 0x7e0006ac; /* eieio + bit 6 hint */
+	}
+
+	for (i = 0; start < end; start++, i++) {
+		dest = (void *)start + *start;
+
+		pr_devel("patching dest %lx\n", (unsigned long)dest);
+
+		patch_instruction(dest, instrs[0]);
+		patch_instruction(dest + 1, instrs[1]);
+		patch_instruction(dest + 2, instrs[2]);
+		patch_instruction(dest + 3, instrs[3]);
+		patch_instruction(dest + 4, instrs[4]);
+		patch_instruction(dest + 5, instrs[5]);
+	}
+	printk(KERN_DEBUG "stf-barrier: patched %d exit locations (%s barrier)\n", i,
+		(types == STF_BARRIER_NONE)                  ? "no" :
+		(types == STF_BARRIER_FALLBACK)              ? "fallback" :
+		(types == STF_BARRIER_EIEIO)                 ? "eieio" :
+		(types == (STF_BARRIER_SYNC_ORI))            ? "hwsync"
+		                                           : "unknown");
+}
+
+
+void do_stf_barrier_fixups(enum stf_barrier_type types)
+{
+	do_stf_entry_barrier_fixups(types);
+	do_stf_exit_barrier_fixups(types);
+}
+
 void do_rfi_flush_fixups(enum l1d_flush_type types)
 {
 	unsigned int instrs[3], *dest;

arch/powerpc/platforms/powernv/opal-nvram.c

@@ -44,6 +44,10 @@ static ssize_t opal_nvram_read(char *buf, size_t count, loff_t *index)
 	return count;
 }
 
+/*
+ * This can be called in the panic path with interrupts off, so use
+ * mdelay in that case.
+ */
 static ssize_t opal_nvram_write(char *buf, size_t count, loff_t *index)
 {
 	s64 rc = OPAL_BUSY;
@@ -58,10 +62,16 @@ static ssize_t opal_nvram_write(char *buf, size_t count, loff_t *index)
 	while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) {
 		rc = opal_write_nvram(__pa(buf), count, off);
 		if (rc == OPAL_BUSY_EVENT) {
-			msleep(OPAL_BUSY_DELAY_MS);
+			if (in_interrupt() || irqs_disabled())
+				mdelay(OPAL_BUSY_DELAY_MS);
+			else
+				msleep(OPAL_BUSY_DELAY_MS);
 			opal_poll_events(NULL);
 		} else if (rc == OPAL_BUSY) {
-			msleep(OPAL_BUSY_DELAY_MS);
+			if (in_interrupt() || irqs_disabled())
+				mdelay(OPAL_BUSY_DELAY_MS);
+			else
+				msleep(OPAL_BUSY_DELAY_MS);
 		}
 	}
 

arch/powerpc/platforms/powernv/setup.c

@@ -131,6 +131,7 @@ static void __init pnv_setup_arch(void)
 	set_arch_panic_timeout(10, ARCH_PANIC_TIMEOUT);
 
 	pnv_setup_rfi_flush();
+	setup_stf_barrier();
 
 	/* Initialize SMP */
 	pnv_smp_init();

arch/powerpc/platforms/pseries/setup.c

@@ -710,6 +710,7 @@ static void __init pSeries_setup_arch(void)
 	fwnmi_init();
 
 	pseries_setup_rfi_flush();
+	setup_stf_barrier();
 
 	/* By default, only probe PCI (can be overridden by rtas_pci) */
 	pci_add_flags(PCI_PROBE_ONLY);

arch/s390/configs/debug_defconfig

@@ -261,9 +261,9 @@ CONFIG_IP_VS_NQ=m
 CONFIG_IP_VS_FTP=m
 CONFIG_IP_VS_PE_SIP=m
 CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_TABLES_IPV4=m
+CONFIG_NF_TABLES_IPV4=y
 CONFIG_NFT_CHAIN_ROUTE_IPV4=m
-CONFIG_NF_TABLES_ARP=m
+CONFIG_NF_TABLES_ARP=y
 CONFIG_NFT_CHAIN_NAT_IPV4=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_AH=m
@@ -284,7 +284,7 @@ CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_NF_TABLES_IPV6=m
+CONFIG_NF_TABLES_IPV6=y
 CONFIG_NFT_CHAIN_ROUTE_IPV6=m
 CONFIG_NFT_CHAIN_NAT_IPV6=m
 CONFIG_IP6_NF_IPTABLES=m
@@ -305,7 +305,7 @@ CONFIG_IP6_NF_RAW=m
 CONFIG_IP6_NF_SECURITY=m
 CONFIG_IP6_NF_NAT=m
 CONFIG_IP6_NF_TARGET_MASQUERADE=m
-CONFIG_NF_TABLES_BRIDGE=m
+CONFIG_NF_TABLES_BRIDGE=y
 CONFIG_RDS=m
 CONFIG_RDS_RDMA=m
 CONFIG_RDS_TCP=m
@@ -604,7 +604,6 @@ CONFIG_DETECT_HUNG_TASK=y
 CONFIG_WQ_WATCHDOG=y
 CONFIG_PANIC_ON_OOPS=y
 CONFIG_DEBUG_TIMEKEEPING=y
-CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
 CONFIG_PROVE_LOCKING=y
 CONFIG_LOCK_STAT=y
 CONFIG_DEBUG_LOCKDEP=y

arch/s390/configs/performance_defconfig

@@ -259,9 +259,9 @@ CONFIG_IP_VS_NQ=m
 CONFIG_IP_VS_FTP=m
 CONFIG_IP_VS_PE_SIP=m
 CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_TABLES_IPV4=m
+CONFIG_NF_TABLES_IPV4=y
 CONFIG_NFT_CHAIN_ROUTE_IPV4=m
-CONFIG_NF_TABLES_ARP=m
+CONFIG_NF_TABLES_ARP=y
 CONFIG_NFT_CHAIN_NAT_IPV4=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_AH=m
@@ -282,7 +282,7 @@ CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_NF_TABLES_IPV6=m
+CONFIG_NF_TABLES_IPV6=y
 CONFIG_NFT_CHAIN_ROUTE_IPV6=m
 CONFIG_NFT_CHAIN_NAT_IPV6=m
 CONFIG_IP6_NF_IPTABLES=m
@@ -303,7 +303,7 @@ CONFIG_IP6_NF_RAW=m
 CONFIG_IP6_NF_SECURITY=m
 CONFIG_IP6_NF_NAT=m
 CONFIG_IP6_NF_TARGET_MASQUERADE=m
-CONFIG_NF_TABLES_BRIDGE=m
+CONFIG_NF_TABLES_BRIDGE=y
 CONFIG_RDS=m
 CONFIG_RDS_RDMA=m
 CONFIG_RDS_TCP=m

arch/s390/crypto/crc32be-vx.S

@@ -13,6 +13,7 @@
  */
 
 #include <linux/linkage.h>
+#include <asm/nospec-insn.h>
 #include <asm/vx-insn.h>
 
 /* Vector register range containing CRC-32 constants */
@@ -67,6 +68,8 @@
 
 .previous
 
+	GEN_BR_THUNK %r14
+
 .text
 /*
  * The CRC-32 function(s) use these calling conventions:
@@ -203,6 +206,6 @@ ENTRY(crc32_be_vgfm_16)
 
 .Ldone:
 	VLGVF	%r2,%v2,3
-	br	%r14
+	BR_EX	%r14
 
 .previous

arch/s390/crypto/crc32le-vx.S

@@ -14,6 +14,7 @@
  */
 
 #include <linux/linkage.h>
+#include <asm/nospec-insn.h>
 #include <asm/vx-insn.h>
 
 /* Vector register range containing CRC-32 constants */
@@ -76,6 +77,7 @@
 
 .previous
 
+	GEN_BR_THUNK %r14
 
 .text
 
@@ -264,6 +266,6 @@ crc32_le_vgfm_generic:
 
 .Ldone:
 	VLGVF	%r2,%v2,2
-	br	%r14
+	BR_EX	%r14
 
 .previous

arch/s390/include/asm/nospec-insn.h

@@ -0,0 +1,196 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_S390_NOSPEC_ASM_H
+#define _ASM_S390_NOSPEC_ASM_H
+
+#include <asm/alternative-asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/dwarf.h>
+
+#ifdef __ASSEMBLY__
+
+#ifdef CONFIG_EXPOLINE
+
+_LC_BR_R1 = __LC_BR_R1
+
+/*
+ * The expoline macros are used to create thunks in the same format
+ * as gcc generates them. The 'comdat' section flag makes sure that
+ * the various thunks are merged into a single copy.
+ */
+	.macro __THUNK_PROLOG_NAME name
+	.pushsection .text.\name,"axG",@progbits,\name,comdat
+	.globl \name
+	.hidden \name
+	.type \name,@function
+\name:
+	CFI_STARTPROC
+	.endm
+
+	.macro __THUNK_EPILOG
+	CFI_ENDPROC
+	.popsection
+	.endm
+
+	.macro __THUNK_PROLOG_BR r1,r2
+	__THUNK_PROLOG_NAME __s390x_indirect_jump_r\r2\()use_r\r1
+	.endm
+
+	.macro __THUNK_PROLOG_BC d0,r1,r2
+	__THUNK_PROLOG_NAME __s390x_indirect_branch_\d0\()_\r2\()use_\r1
+	.endm
+
+	.macro __THUNK_BR r1,r2
+	jg	__s390x_indirect_jump_r\r2\()use_r\r1
+	.endm
+
+	.macro __THUNK_BC d0,r1,r2
+	jg	__s390x_indirect_branch_\d0\()_\r2\()use_\r1
+	.endm
+
+	.macro __THUNK_BRASL r1,r2,r3
+	brasl	\r1,__s390x_indirect_jump_r\r3\()use_r\r2
+	.endm
+
+	.macro	__DECODE_RR expand,reg,ruse
+	.set __decode_fail,1
+	.irp r1,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
+	.ifc \reg,%r\r1
+	.irp r2,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
+	.ifc \ruse,%r\r2
+	\expand \r1,\r2
+	.set __decode_fail,0
+	.endif
+	.endr
+	.endif
+	.endr
+	.if __decode_fail == 1
+	.error "__DECODE_RR failed"
+	.endif
+	.endm
+
+	.macro	__DECODE_RRR expand,rsave,rtarget,ruse
+	.set __decode_fail,1
+	.irp r1,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
+	.ifc \rsave,%r\r1
+	.irp r2,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
+	.ifc \rtarget,%r\r2
+	.irp r3,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
+	.ifc \ruse,%r\r3
+	\expand \r1,\r2,\r3
+	.set __decode_fail,0
+	.endif
+	.endr
+	.endif
+	.endr
+	.endif
+	.endr
+	.if __decode_fail == 1
+	.error "__DECODE_RRR failed"
+	.endif
+	.endm
+
+	.macro	__DECODE_DRR expand,disp,reg,ruse
+	.set __decode_fail,1
+	.irp r1,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
+	.ifc \reg,%r\r1
+	.irp r2,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
+	.ifc \ruse,%r\r2
+	\expand \disp,\r1,\r2
+	.set __decode_fail,0
+	.endif
+	.endr
+	.endif
+	.endr
+	.if __decode_fail == 1
+	.error "__DECODE_DRR failed"
+	.endif
+	.endm
+
+	.macro __THUNK_EX_BR reg,ruse
+	# Be very careful when adding instructions to this macro!
+	# The ALTERNATIVE replacement code has a .+10 which targets
+	# the "br \reg" after the code has been patched.
+#ifdef CONFIG_HAVE_MARCH_Z10_FEATURES
+	exrl	0,555f
+	j	.
+#else
+	.ifc \reg,%r1
+	ALTERNATIVE "ex %r0,_LC_BR_R1", ".insn ril,0xc60000000000,0,.+10", 35
+	j	.
+	.else
+	larl	\ruse,555f
+	ex	0,0(\ruse)
+	j	.
+	.endif
+#endif
+555:	br	\reg
+	.endm
+
+	.macro __THUNK_EX_BC disp,reg,ruse
+#ifdef CONFIG_HAVE_MARCH_Z10_FEATURES
+	exrl	0,556f
+	j	.
+#else
+	larl	\ruse,556f
+	ex	0,0(\ruse)
+	j	.
+#endif
+556:	b	\disp(\reg)
+	.endm
+
+	.macro GEN_BR_THUNK reg,ruse=%r1
+	__DECODE_RR __THUNK_PROLOG_BR,\reg,\ruse
+	__THUNK_EX_BR \reg,\ruse
+	__THUNK_EPILOG
+	.endm
+
+	.macro GEN_B_THUNK disp,reg,ruse=%r1
+	__DECODE_DRR __THUNK_PROLOG_BC,\disp,\reg,\ruse
+	__THUNK_EX_BC \disp,\reg,\ruse
+	__THUNK_EPILOG
+	.endm
+
+	.macro BR_EX reg,ruse=%r1
+557:	__DECODE_RR __THUNK_BR,\reg,\ruse
+	.pushsection .s390_indirect_branches,"a",@progbits
+	.long	557b-.
+	.popsection
+	.endm
+
+	 .macro B_EX disp,reg,ruse=%r1
+558:	__DECODE_DRR __THUNK_BC,\disp,\reg,\ruse
+	.pushsection .s390_indirect_branches,"a",@progbits
+	.long	558b-.
+	.popsection
+	.endm
+
+	.macro BASR_EX rsave,rtarget,ruse=%r1
+559:	__DECODE_RRR __THUNK_BRASL,\rsave,\rtarget,\ruse
+	.pushsection .s390_indirect_branches,"a",@progbits
+	.long	559b-.
+	.popsection
+	.endm
+
+#else
+	.macro GEN_BR_THUNK reg,ruse=%r1
+	.endm
+
+	.macro GEN_B_THUNK disp,reg,ruse=%r1
+	.endm
+
+	 .macro BR_EX reg,ruse=%r1
+	br	\reg
+	.endm
+
+	 .macro B_EX disp,reg,ruse=%r1
+	b	\disp(\reg)
+	.endm
+
+	.macro BASR_EX rsave,rtarget,ruse=%r1
+	basr	\rsave,\rtarget
+	.endm
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_S390_NOSPEC_ASM_H */

arch/s390/include/asm/purgatory.h

@@ -13,5 +13,11 @@
 
 int verify_sha256_digest(void);
 
+extern u64 kernel_entry;
+extern u64 kernel_type;
+
+extern u64 crash_start;
+extern u64 crash_size;
+
 #endif	/* __ASSEMBLY__ */
 #endif /* _S390_PURGATORY_H_ */

arch/s390/kernel/Makefile

@@ -65,6 +65,7 @@ obj-y	+= nospec-branch.o
 
 extra-y				+= head.o head64.o vmlinux.lds
 
+obj-$(CONFIG_SYSFS)		+= nospec-sysfs.o
 CFLAGS_REMOVE_nospec-branch.o	+= $(CC_FLAGS_EXPOLINE)
 
 obj-$(CONFIG_MODULES)		+= module.o

arch/s390/kernel/asm-offsets.c

@@ -181,6 +181,7 @@ int main(void)
 	OFFSET(__LC_MACHINE_FLAGS, lowcore, machine_flags);
 	OFFSET(__LC_PREEMPT_COUNT, lowcore, preempt_count);
 	OFFSET(__LC_GMAP, lowcore, gmap);
+	OFFSET(__LC_BR_R1, lowcore, br_r1_trampoline);
 	/* software defined ABI-relevant lowcore locations 0xe00 - 0xe20 */
 	OFFSET(__LC_DUMP_REIPL, lowcore, ipib);
 	/* hardware defined lowcore locations 0x1000 - 0x18ff */

arch/s390/kernel/base.S

@@ -9,18 +9,22 @@
 
 #include <linux/linkage.h>
 #include <asm/asm-offsets.h>
+#include <asm/nospec-insn.h>
 #include <asm/ptrace.h>
 #include <asm/sigp.h>
 
+	GEN_BR_THUNK %r9
+	GEN_BR_THUNK %r14
+
 ENTRY(s390_base_mcck_handler)
 	basr	%r13,0
 0:	lg	%r15,__LC_PANIC_STACK	# load panic stack
 	aghi	%r15,-STACK_FRAME_OVERHEAD
 	larl	%r1,s390_base_mcck_handler_fn
-	lg	%r1,0(%r1)
-	ltgr	%r1,%r1
+	lg	%r9,0(%r1)
+	ltgr	%r9,%r9
 	jz	1f
-	basr	%r14,%r1
+	BASR_EX	%r14,%r9
 1:	la	%r1,4095
 	lmg	%r0,%r15,__LC_GPREGS_SAVE_AREA-4095(%r1)
 	lpswe	__LC_MCK_OLD_PSW
@@ -37,10 +41,10 @@ ENTRY(s390_base_ext_handler)
 	basr	%r13,0
 0:	aghi	%r15,-STACK_FRAME_OVERHEAD
 	larl	%r1,s390_base_ext_handler_fn
-	lg	%r1,0(%r1)
-	ltgr	%r1,%r1
+	lg	%r9,0(%r1)
+	ltgr	%r9,%r9
 	jz	1f
-	basr	%r14,%r1
+	BASR_EX	%r14,%r9
 1:	lmg	%r0,%r15,__LC_SAVE_AREA_ASYNC
 	ni	__LC_EXT_OLD_PSW+1,0xfd	# clear wait state bit
 	lpswe	__LC_EXT_OLD_PSW
@@ -57,10 +61,10 @@ ENTRY(s390_base_pgm_handler)
 	basr	%r13,0
 0:	aghi	%r15,-STACK_FRAME_OVERHEAD
 	larl	%r1,s390_base_pgm_handler_fn
-	lg	%r1,0(%r1)
-	ltgr	%r1,%r1
+	lg	%r9,0(%r1)
+	ltgr	%r9,%r9
 	jz	1f
-	basr	%r14,%r1
+	BASR_EX	%r14,%r9
 	lmg	%r0,%r15,__LC_SAVE_AREA_SYNC
 	lpswe	__LC_PGM_OLD_PSW
 1:	lpswe	disabled_wait_psw-0b(%r13)
@@ -117,7 +121,7 @@ ENTRY(diag308_reset)
 	larl	%r4,.Lcontinue_psw	# Restore PSW flags
 	lpswe	0(%r4)
 .Lcontinue:
-	br	%r14
+	BR_EX	%r14
 .align 16
 .Lrestart_psw:
 	.long	0x00080000,0x80000000 + .Lrestart_part2

arch/s390/kernel/entry.S

@@ -28,6 +28,7 @@
 #include <asm/setup.h>
 #include <asm/nmi.h>
 #include <asm/export.h>
+#include <asm/nospec-insn.h>
 
 __PT_R0      =	__PT_GPRS
 __PT_R1      =	__PT_GPRS + 8
@@ -183,67 +184,9 @@ _LPP_OFFSET	= __LC_LPP
 		    "jnz .+8; .long 0xb2e8d000", 82
 	.endm
 
-#ifdef CONFIG_EXPOLINE
-
-	.macro GEN_BR_THUNK name,reg,tmp
-	.section .text.\name,"axG",@progbits,\name,comdat
-	.globl \name
-	.hidden \name
-	.type \name,@function
-\name:
-	CFI_STARTPROC
-#ifdef CONFIG_HAVE_MARCH_Z10_FEATURES
-	exrl	0,0f
-#else
-	larl	\tmp,0f
-	ex	0,0(\tmp)
-#endif
-	j	.
-0:	br	\reg
-	CFI_ENDPROC
-	.endm
-
-	GEN_BR_THUNK __s390x_indirect_jump_r1use_r9,%r9,%r1
-	GEN_BR_THUNK __s390x_indirect_jump_r1use_r14,%r14,%r1
-	GEN_BR_THUNK __s390x_indirect_jump_r11use_r14,%r14,%r11
-
-	.macro BASR_R14_R9
-0:	brasl	%r14,__s390x_indirect_jump_r1use_r9
-	.pushsection .s390_indirect_branches,"a",@progbits
-	.long	0b-.
-	.popsection
-	.endm
-
-	.macro BR_R1USE_R14
-0:	jg	__s390x_indirect_jump_r1use_r14
-	.pushsection .s390_indirect_branches,"a",@progbits
-	.long	0b-.
-	.popsection
-	.endm
-
-	.macro BR_R11USE_R14
-0:	jg	__s390x_indirect_jump_r11use_r14
-	.pushsection .s390_indirect_branches,"a",@progbits
-	.long	0b-.
-	.popsection
-	.endm
-
-#else	/* CONFIG_EXPOLINE */
-
-	.macro BASR_R14_R9
-	basr	%r14,%r9
-	.endm
-
-	.macro BR_R1USE_R14
-	br	%r14
-	.endm
-
-	.macro BR_R11USE_R14
-	br	%r14
-	.endm
-
-#endif /* CONFIG_EXPOLINE */
-
+	GEN_BR_THUNK %r9
+	GEN_BR_THUNK %r14
+	GEN_BR_THUNK %r14,%r11
 
 	.section .kprobes.text, "ax"
 .Ldummy:
@@ -260,7 +203,7 @@ _LPP_OFFSET	= __LC_LPP
 ENTRY(__bpon)
 	.globl __bpon
 	BPON
-	BR_R1USE_R14
+	BR_EX	%r14
 
 /*
  * Scheduler resume function, called by switch_to
@@ -284,7 +227,7 @@ ENTRY(__switch_to)
 	mvc	__LC_CURRENT_PID(4,%r0),0(%r3)	# store pid of next
 	lmg	%r6,%r15,__SF_GPRS(%r15)	# load gprs of next task
 	ALTERNATIVE "", ".insn s,0xb2800000,_LPP_OFFSET", 40
-	BR_R1USE_R14
+	BR_EX	%r14
 
 .L__critical_start:
 
@@ -351,7 +294,7 @@ sie_exit:
 	xgr	%r5,%r5
 	lmg	%r6,%r14,__SF_GPRS(%r15)	# restore kernel registers
 	lg	%r2,__SF_SIE_REASON(%r15)	# return exit reason code
-	BR_R1USE_R14
+	BR_EX	%r14
 .Lsie_fault:
 	lghi	%r14,-EFAULT
 	stg	%r14,__SF_SIE_REASON(%r15)	# set exit reason code
@@ -410,7 +353,7 @@ ENTRY(system_call)
 	lgf	%r9,0(%r8,%r10)			# get system call add.
 	TSTMSK	__TI_flags(%r12),_TIF_TRACE
 	jnz	.Lsysc_tracesys
-	BASR_R14_R9				# call sys_xxxx
+	BASR_EX	%r14,%r9			# call sys_xxxx
 	stg	%r2,__PT_R2(%r11)		# store return value
 
 .Lsysc_return:
@@ -595,7 +538,7 @@ ENTRY(system_call)
 	lmg	%r3,%r7,__PT_R3(%r11)
 	stg	%r7,STACK_FRAME_OVERHEAD(%r15)
 	lg	%r2,__PT_ORIG_GPR2(%r11)
-	BASR_R14_R9			# call sys_xxx
+	BASR_EX	%r14,%r9		# call sys_xxx
 	stg	%r2,__PT_R2(%r11)	# store return value
 .Lsysc_tracenogo:
 	TSTMSK	__TI_flags(%r12),_TIF_TRACE
@@ -619,7 +562,7 @@ ENTRY(ret_from_fork)
 	lmg	%r9,%r10,__PT_R9(%r11)	# load gprs
 ENTRY(kernel_thread_starter)
 	la	%r2,0(%r10)
-	BASR_R14_R9
+	BASR_EX	%r14,%r9
 	j	.Lsysc_tracenogo
 
 /*
@@ -701,7 +644,7 @@ ENTRY(pgm_check_handler)
 	je	.Lpgm_return
 	lgf	%r9,0(%r10,%r1)		# load address of handler routine
 	lgr	%r2,%r11		# pass pointer to pt_regs
-	BASR_R14_R9			# branch to interrupt-handler
+	BASR_EX	%r14,%r9		# branch to interrupt-handler
 .Lpgm_return:
 	LOCKDEP_SYS_EXIT
 	tm	__PT_PSW+1(%r11),0x01	# returning to user ?
@@ -1019,7 +962,7 @@ ENTRY(psw_idle)
 	stpt	__TIMER_IDLE_ENTER(%r2)
 .Lpsw_idle_lpsw:
 	lpswe	__SF_EMPTY(%r15)
-	BR_R1USE_R14
+	BR_EX	%r14
 .Lpsw_idle_end:
 
 /*
@@ -1061,7 +1004,7 @@ ENTRY(save_fpu_regs)
 .Lsave_fpu_regs_done:
 	oi	__LC_CPU_FLAGS+7,_CIF_FPU
 .Lsave_fpu_regs_exit:
-	BR_R1USE_R14
+	BR_EX	%r14
 .Lsave_fpu_regs_end:
 EXPORT_SYMBOL(save_fpu_regs)
 
@@ -1107,7 +1050,7 @@ load_fpu_regs:
 .Lload_fpu_regs_done:
 	ni	__LC_CPU_FLAGS+7,255-_CIF_FPU
 .Lload_fpu_regs_exit:
-	BR_R1USE_R14
+	BR_EX	%r14
 .Lload_fpu_regs_end:
 
 .L__critical_end:
@@ -1322,7 +1265,7 @@ cleanup_critical:
 	jl	0f
 	clg	%r9,BASED(.Lcleanup_table+104)	# .Lload_fpu_regs_end
 	jl	.Lcleanup_load_fpu_regs
-0:	BR_R11USE_R14
+0:	BR_EX	%r14
 
 	.align	8
 .Lcleanup_table:
@@ -1358,7 +1301,7 @@ cleanup_critical:
 	ni	__SIE_PROG0C+3(%r9),0xfe	# no longer in SIE
 	lctlg	%c1,%c1,__LC_USER_ASCE		# load primary asce
 	larl	%r9,sie_exit			# skip forward to sie_exit
-	BR_R11USE_R14
+	BR_EX	%r14
 #endif
 
 .Lcleanup_system_call:
@@ -1412,7 +1355,7 @@ cleanup_critical:
 	stg	%r15,56(%r11)		# r15 stack pointer
 	# set new psw address and exit
 	larl	%r9,.Lsysc_do_svc
-	BR_R11USE_R14
+	BR_EX	%r14,%r11
 .Lcleanup_system_call_insn:
 	.quad	system_call
 	.quad	.Lsysc_stmg
@@ -1424,7 +1367,7 @@ cleanup_critical:
 
 .Lcleanup_sysc_tif:
 	larl	%r9,.Lsysc_tif
-	BR_R11USE_R14
+	BR_EX	%r14,%r11
 
 .Lcleanup_sysc_restore:
 	# check if stpt has been executed
@@ -1441,14 +1384,14 @@ cleanup_critical:
 	mvc	0(64,%r11),__PT_R8(%r9)
 	lmg	%r0,%r7,__PT_R0(%r9)
 1:	lmg	%r8,%r9,__LC_RETURN_PSW
-	BR_R11USE_R14
+	BR_EX	%r14,%r11
 .Lcleanup_sysc_restore_insn:
 	.quad	.Lsysc_exit_timer
 	.quad	.Lsysc_done - 4
 
 .Lcleanup_io_tif:
 	larl	%r9,.Lio_tif
-	BR_R11USE_R14
+	BR_EX	%r14,%r11
 
 .Lcleanup_io_restore:
 	# check if stpt has been executed
@@ -1462,7 +1405,7 @@ cleanup_critical:
 	mvc	0(64,%r11),__PT_R8(%r9)
 	lmg	%r0,%r7,__PT_R0(%r9)
 1:	lmg	%r8,%r9,__LC_RETURN_PSW
-	BR_R11USE_R14
+	BR_EX	%r14,%r11
 .Lcleanup_io_restore_insn:
 	.quad	.Lio_exit_timer
 	.quad	.Lio_done - 4
@@ -1515,17 +1458,17 @@ cleanup_critical:
 	# prepare return psw
 	nihh	%r8,0xfcfd		# clear irq & wait state bits
 	lg	%r9,48(%r11)		# return from psw_idle
-	BR_R11USE_R14
+	BR_EX	%r14,%r11
 .Lcleanup_idle_insn:
 	.quad	.Lpsw_idle_lpsw
 
 .Lcleanup_save_fpu_regs:
 	larl	%r9,save_fpu_regs
-	BR_R11USE_R14
+	BR_EX	%r14,%r11
 
 .Lcleanup_load_fpu_regs:
 	larl	%r9,load_fpu_regs
-	BR_R11USE_R14
+	BR_EX	%r14,%r11
 
 /*
  * Integer constants

arch/s390/kernel/irq.c

@@ -176,10 +176,9 @@ void do_softirq_own_stack(void)
 		new -= STACK_FRAME_OVERHEAD;
 		((struct stack_frame *) new)->back_chain = old;
 		asm volatile("   la    15,0(%0)\n"
-			     "   basr  14,%2\n"
+			     "   brasl 14,__do_softirq\n"
 			     "   la    15,0(%1)\n"
-			     : : "a" (new), "a" (old),
-			         "a" (__do_softirq)
+			     : : "a" (new), "a" (old)
 			     : "0", "1", "2", "3", "4", "5", "14",
 			       "cc", "memory" );
 	} else {

arch/s390/kernel/mcount.S

@@ -9,13 +9,17 @@
 #include <linux/linkage.h>
 #include <asm/asm-offsets.h>
 #include <asm/ftrace.h>
+#include <asm/nospec-insn.h>
 #include <asm/ptrace.h>
 #include <asm/export.h>
 
+	GEN_BR_THUNK %r1
+	GEN_BR_THUNK %r14
+
 	.section .kprobes.text, "ax"
 
 ENTRY(ftrace_stub)
-	br	%r14
+	BR_EX	%r14
 
 #define STACK_FRAME_SIZE  (STACK_FRAME_OVERHEAD + __PT_SIZE)
 #define STACK_PTREGS	  (STACK_FRAME_OVERHEAD)
@@ -23,7 +27,7 @@ ENTRY(ftrace_stub)
 #define STACK_PTREGS_PSW  (STACK_PTREGS + __PT_PSW)
 
 ENTRY(_mcount)
-	br	%r14
+	BR_EX	%r14
 
 EXPORT_SYMBOL(_mcount)
 
@@ -53,7 +57,7 @@ ENTRY(ftrace_caller)
 #endif
 	lgr	%r3,%r14
 	la	%r5,STACK_PTREGS(%r15)
-	basr	%r14,%r1
+	BASR_EX	%r14,%r1
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 # The j instruction gets runtime patched to a nop instruction.
 # See ftrace_enable_ftrace_graph_caller.
@@ -68,7 +72,7 @@ ftrace_graph_caller_end:
 #endif
 	lg	%r1,(STACK_PTREGS_PSW+8)(%r15)
 	lmg	%r2,%r15,(STACK_PTREGS_GPRS+2*8)(%r15)
-	br	%r1
+	BR_EX	%r1
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 
@@ -81,6 +85,6 @@ ENTRY(return_to_handler)
 	aghi	%r15,STACK_FRAME_OVERHEAD
 	lgr	%r14,%r2
 	lmg	%r2,%r5,32(%r15)
-	br	%r14
+	BR_EX	%r14
 
 #endif

arch/s390/kernel/nospec-branch.c

@@ -1,7 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <linux/module.h>
 #include <linux/device.h>
-#include <linux/cpu.h>
 #include <asm/nospec-branch.h>
 
 static int __init nobp_setup_early(char *str)
@@ -44,24 +43,6 @@ static int __init nospec_report(void)
 }
 arch_initcall(nospec_report);
 
-#ifdef CONFIG_SYSFS
-ssize_t cpu_show_spectre_v1(struct device *dev,
-			    struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "Mitigation: __user pointer sanitization\n");
-}
-
-ssize_t cpu_show_spectre_v2(struct device *dev,
-			    struct device_attribute *attr, char *buf)
-{
-	if (IS_ENABLED(CC_USING_EXPOLINE) && !nospec_disable)
-		return sprintf(buf, "Mitigation: execute trampolines\n");
-	if (__test_facility(82, S390_lowcore.alt_stfle_fac_list))
-		return sprintf(buf, "Mitigation: limited branch prediction.\n");
-	return sprintf(buf, "Vulnerable\n");
-}
-#endif
-
 #ifdef CONFIG_EXPOLINE
 
 int nospec_disable = IS_ENABLED(CONFIG_EXPOLINE_OFF);
@@ -112,7 +93,6 @@ static void __init_or_module __nospec_revert(s32 *start, s32 *end)
 	s32 *epo;
 
 	/* Second part of the instruction replace is always a nop */
-	memcpy(insnbuf + 2, (char[]) { 0x47, 0x00, 0x00, 0x00 }, 4);
 	for (epo = start; epo < end; epo++) {
 		instr = (u8 *) epo + *epo;
 		if (instr[0] == 0xc0 && (instr[1] & 0x0f) == 0x04)
@@ -133,18 +113,34 @@ static void __init_or_module __nospec_revert(s32 *start, s32 *end)
 			br = thunk + (*(int *)(thunk + 2)) * 2;
 		else
 			continue;
-		if (br[0] != 0x07 || (br[1] & 0xf0) != 0xf0)
+		/* Check for unconditional branch 0x07f? or 0x47f???? */
+		if ((br[0] & 0xbf) != 0x07 || (br[1] & 0xf0) != 0xf0)
 			continue;
+
+		memcpy(insnbuf + 2, (char[]) { 0x47, 0x00, 0x07, 0x00 }, 4);
 		switch (type) {
 		case BRCL_EXPOLINE:
-			/* brcl to thunk, replace with br + nop */
 			insnbuf[0] = br[0];
 			insnbuf[1] = (instr[1] & 0xf0) | (br[1] & 0x0f);
+			if (br[0] == 0x47) {
+				/* brcl to b, replace with bc + nopr */
+				insnbuf[2] = br[2];
+				insnbuf[3] = br[3];
+			} else {
+				/* brcl to br, replace with bcr + nop */
+			}
 			break;
 		case BRASL_EXPOLINE:
-			/* brasl to thunk, replace with basr + nop */
-			insnbuf[0] = 0x0d;
 			insnbuf[1] = (instr[1] & 0xf0) | (br[1] & 0x0f);
+			if (br[0] == 0x47) {
+				/* brasl to b, replace with bas + nopr */
+				insnbuf[0] = 0x4d;
+				insnbuf[2] = br[2];
+				insnbuf[3] = br[3];
+			} else {
+				/* brasl to br, replace with basr + nop */
+				insnbuf[0] = 0x0d;
+			}
 			break;
 		}
 

arch/s390/kernel/nospec-sysfs.c

@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/device.h>
+#include <linux/cpu.h>
+#include <asm/facility.h>
+#include <asm/nospec-branch.h>
+
+ssize_t cpu_show_spectre_v1(struct device *dev,
+			    struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "Mitigation: __user pointer sanitization\n");
+}
+
+ssize_t cpu_show_spectre_v2(struct device *dev,
+			    struct device_attribute *attr, char *buf)
+{
+	if (IS_ENABLED(CC_USING_EXPOLINE) && !nospec_disable)
+		return sprintf(buf, "Mitigation: execute trampolines\n");
+	if (__test_facility(82, S390_lowcore.alt_stfle_fac_list))
+		return sprintf(buf, "Mitigation: limited branch prediction\n");
+	return sprintf(buf, "Vulnerable\n");
+}

arch/s390/kernel/perf_cpum_sf.c

@@ -753,6 +753,10 @@ static int __hw_perf_event_init(struct perf_event *event)
 	 */
 	rate = 0;
 	if (attr->freq) {
+		if (!attr->sample_freq) {
+			err = -EINVAL;
+			goto out;
+		}
 		rate = freq_to_sample_rate(&si, attr->sample_freq);
 		rate = hw_limit_rate(&si, rate);
 		attr->freq = 0;

arch/s390/kernel/reipl.S

@@ -7,8 +7,11 @@
 
 #include <linux/linkage.h>
 #include <asm/asm-offsets.h>
+#include <asm/nospec-insn.h>
 #include <asm/sigp.h>
 
+	GEN_BR_THUNK %r9
+
 #
 # Issue "store status" for the current CPU to its prefix page
 # and call passed function afterwards
@@ -67,9 +70,9 @@ ENTRY(store_status)
 	st	%r4,0(%r1)
 	st	%r5,4(%r1)
 	stg	%r2,8(%r1)
-	lgr	%r1,%r2
+	lgr	%r9,%r2
 	lgr	%r2,%r3
-	br	%r1
+	BR_EX	%r9
 
 	.section .bss
 	.align	8

arch/s390/kernel/swsusp.S

@@ -13,6 +13,7 @@
 #include <asm/ptrace.h>
 #include <asm/thread_info.h>
 #include <asm/asm-offsets.h>
+#include <asm/nospec-insn.h>
 #include <asm/sigp.h>
 
 /*
@@ -24,6 +25,8 @@
  * (see below) in the resume process.
  * This function runs with disabled interrupts.
  */
+	GEN_BR_THUNK %r14
+
 	.section .text
 ENTRY(swsusp_arch_suspend)
 	stmg	%r6,%r15,__SF_GPRS(%r15)
@@ -103,7 +106,7 @@ ENTRY(swsusp_arch_suspend)
 	spx	0x318(%r1)
 	lmg	%r6,%r15,STACK_FRAME_OVERHEAD + __SF_GPRS(%r15)
 	lghi	%r2,0
-	br	%r14
+	BR_EX	%r14
 
 /*
  * Restore saved memory image to correct place and restore register context.
@@ -197,11 +200,10 @@ pgm_check_entry:
 	larl	%r15,init_thread_union
 	ahi	%r15,1<<(PAGE_SHIFT+THREAD_SIZE_ORDER)
 	larl	%r2,.Lpanic_string
-	larl	%r3,sclp_early_printk
 	lghi	%r1,0
 	sam31
 	sigp	%r1,%r0,SIGP_SET_ARCHITECTURE
-	basr	%r14,%r3
+	brasl	%r14,sclp_early_printk
 	larl	%r3,.Ldisabled_wait_31
 	lpsw	0(%r3)
 4:
@@ -267,7 +269,7 @@ restore_registers:
 	/* Return 0 */
 	lmg	%r6,%r15,STACK_FRAME_OVERHEAD + __SF_GPRS(%r15)
 	lghi	%r2,0
-	br	%r14
+	BR_EX	%r14
 
 	.section .data..nosave,"aw",@progbits
 	.align	8

arch/s390/lib/mem.S

@@ -7,6 +7,9 @@
 
 #include <linux/linkage.h>
 #include <asm/export.h>
+#include <asm/nospec-insn.h>
+
+	GEN_BR_THUNK %r14
 
 /*
  * void *memmove(void *dest, const void *src, size_t n)
@@ -33,14 +36,14 @@ ENTRY(memmove)
 .Lmemmove_forward_remainder:
 	larl	%r5,.Lmemmove_mvc
 	ex	%r4,0(%r5)
-	br	%r14
+	BR_EX	%r14
 .Lmemmove_reverse:
 	ic	%r0,0(%r4,%r3)
 	stc	%r0,0(%r4,%r1)
 	brctg	%r4,.Lmemmove_reverse
 	ic	%r0,0(%r4,%r3)
 	stc	%r0,0(%r4,%r1)
-	br	%r14
+	BR_EX	%r14
 .Lmemmove_mvc:
 	mvc	0(1,%r1),0(%r3)
 EXPORT_SYMBOL(memmove)
@@ -77,7 +80,7 @@ ENTRY(memset)
 .Lmemset_clear_remainder:
 	larl	%r3,.Lmemset_xc
 	ex	%r4,0(%r3)
-	br	%r14
+	BR_EX	%r14
 .Lmemset_fill:
 	cghi	%r4,1
 	lgr	%r1,%r2
@@ -95,10 +98,10 @@ ENTRY(memset)
 	stc	%r3,0(%r1)
 	larl	%r5,.Lmemset_mvc
 	ex	%r4,0(%r5)
-	br	%r14
+	BR_EX	%r14
 .Lmemset_fill_exit:
 	stc	%r3,0(%r1)
-	br	%r14
+	BR_EX	%r14
 .Lmemset_xc:
 	xc	0(1,%r1),0(%r1)
 .Lmemset_mvc:
@@ -121,7 +124,7 @@ ENTRY(memcpy)
 .Lmemcpy_remainder:
 	larl	%r5,.Lmemcpy_mvc
 	ex	%r4,0(%r5)
-	br	%r14
+	BR_EX	%r14
 .Lmemcpy_loop:
 	mvc	0(256,%r1),0(%r3)
 	la	%r1,256(%r1)
@@ -159,10 +162,10 @@ ENTRY(__memset\bits)
 	\insn	%r3,0(%r1)
 	larl	%r5,.L__memset_mvc\bits
 	ex	%r4,0(%r5)
-	br	%r14
+	BR_EX	%r14
 .L__memset_exit\bits:
 	\insn	%r3,0(%r2)
-	br	%r14
+	BR_EX	%r14
 .L__memset_mvc\bits:
 	mvc	\bytes(1,%r1),0(%r1)
 .endm

arch/s390/net/bpf_jit.S

@@ -9,6 +9,7 @@
  */
 
 #include <linux/linkage.h>
+#include <asm/nospec-insn.h>
 #include "bpf_jit.h"
 
 /*
@@ -54,7 +55,7 @@ ENTRY(sk_load_##NAME##_pos);						\
 	clg	%r3,STK_OFF_HLEN(%r15);	/* Offset + SIZE > hlen? */	\
 	jh	sk_load_##NAME##_slow;					\
 	LOAD	%r14,-SIZE(%r3,%r12);	/* Get data from skb */		\
-	b	OFF_OK(%r6);		/* Return */			\
+	B_EX	OFF_OK,%r6;		/* Return */			\
 									\
 sk_load_##NAME##_slow:;							\
 	lgr	%r2,%r7;		/* Arg1 = skb pointer */	\
@@ -64,11 +65,14 @@ sk_load_##NAME##_slow:;							\
 	brasl	%r14,skb_copy_bits;	/* Get data from skb */		\
 	LOAD	%r14,STK_OFF_TMP(%r15);	/* Load from temp bufffer */	\
 	ltgr	%r2,%r2;		/* Set cc to (%r2 != 0) */	\
-	br	%r6;			/* Return */
+	BR_EX	%r6;			/* Return */
 
 sk_load_common(word, 4, llgf)	/* r14 = *(u32 *) (skb->data+offset) */
 sk_load_common(half, 2, llgh)	/* r14 = *(u16 *) (skb->data+offset) */
 
+	GEN_BR_THUNK %r6
+	GEN_B_THUNK OFF_OK,%r6
+
 /*
  * Load 1 byte from SKB (optimized version)
  */
@@ -80,7 +84,7 @@ ENTRY(sk_load_byte_pos)
 	clg	%r3,STK_OFF_HLEN(%r15)	# Offset >= hlen?
 	jnl	sk_load_byte_slow
 	llgc	%r14,0(%r3,%r12)	# Get byte from skb
-	b	OFF_OK(%r6)		# Return OK
+	B_EX	OFF_OK,%r6		# Return OK
 
 sk_load_byte_slow:
 	lgr	%r2,%r7			# Arg1 = skb pointer
@@ -90,7 +94,7 @@ sk_load_byte_slow:
 	brasl	%r14,skb_copy_bits	# Get data from skb
 	llgc	%r14,STK_OFF_TMP(%r15)	# Load result from temp buffer
 	ltgr	%r2,%r2			# Set cc to (%r2 != 0)
-	br	%r6			# Return cc
+	BR_EX	%r6			# Return cc
 
 #define sk_negative_common(NAME, SIZE, LOAD)				\
 sk_load_##NAME##_slow_neg:;						\
@@ -104,7 +108,7 @@ sk_load_##NAME##_slow_neg:;						\
 	jz	bpf_error;						\
 	LOAD	%r14,0(%r2);		/* Get data from pointer */	\
 	xr	%r3,%r3;		/* Set cc to zero */		\
-	br	%r6;			/* Return cc */
+	BR_EX	%r6;			/* Return cc */
 
 sk_negative_common(word, 4, llgf)
 sk_negative_common(half, 2, llgh)
@@ -113,4 +117,4 @@ sk_negative_common(byte, 1, llgc)
 bpf_error:
 # force a return 0 from jit handler
 	ltgr	%r15,%r15	# Set condition code
-	br	%r6
+	BR_EX	%r6