Merge 4.14-rc6 into usb-next

We need the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935

@@ -14,3 +14,11 @@ Description:
 		Show or set the gain boost of the amp, from 0-31 range.
 		18 = indoors (default)
 		14 = outdoors
+
+What		/sys/bus/iio/devices/iio:deviceX/noise_level_tripped
+Date:		May 2017
+KernelVersion:	4.13
+Contact:	Matt Ranostay <matt.ranostay@konsulko.com>
+Description:
+		When 1 the noise level is over the trip level and not reporting
+		valid data

Documentation/core-api/kernel-api.rst

@@ -352,44 +352,30 @@ Read-Copy Update (RCU)
 ----------------------
 
 .. kernel-doc:: include/linux/rcupdate.h
-   :external:
 
 .. kernel-doc:: include/linux/rcupdate_wait.h
-   :external:
 
 .. kernel-doc:: include/linux/rcutree.h
-   :external:
 
 .. kernel-doc:: kernel/rcu/tree.c
-   :external:
 
 .. kernel-doc:: kernel/rcu/tree_plugin.h
-   :external:
 
 .. kernel-doc:: kernel/rcu/tree_exp.h
-   :external:
 
 .. kernel-doc:: kernel/rcu/update.c
-   :external:
 
 .. kernel-doc:: include/linux/srcu.h
-   :external:
 
 .. kernel-doc:: kernel/rcu/srcutree.c
-   :external:
 
 .. kernel-doc:: include/linux/rculist_bl.h
-   :external:
 
 .. kernel-doc:: include/linux/rculist.h
-   :external:
 
 .. kernel-doc:: include/linux/rculist_nulls.h
-   :external:
 
 .. kernel-doc:: include/linux/rcu_sync.h
-   :external:
 
 .. kernel-doc:: kernel/rcu/sync.c
-   :external:
 

Documentation/devicetree/bindings/iio/proximity/as3935.txt

@@ -16,6 +16,10 @@ Optional properties:
 	- ams,tuning-capacitor-pf: Calibration tuning capacitor stepping
 	  value 0 - 120pF. This will require using the calibration data from
 	  the manufacturer.
+	- ams,nflwdth: Set the noise and watchdog threshold register on
+	  startup. This will need to set according to the noise from the
+	  MCU board, and possibly the local environment. Refer to the
+	  datasheet for the threshold settings.
 
 Example:
 
@@ -27,4 +31,5 @@ as3935@0 {
 	interrupt-parent = <&gpio1>;
 	interrupts = <16 1>;
 	ams,tuning-capacitor-pf = <80>;
+	ams,nflwdth = <0x44>;
 };

Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt

@@ -99,7 +99,7 @@ Examples:
 			compatible = "arm,gic-v3-its";
 			msi-controller;
 			#msi-cells = <1>;
-			reg = <0x0 0x2c200000 0 0x200000>;
+			reg = <0x0 0x2c200000 0 0x20000>;
 		};
 	};
 
@@ -124,14 +124,14 @@ Examples:
 			compatible = "arm,gic-v3-its";
 			msi-controller;
 			#msi-cells = <1>;
-			reg = <0x0 0x2c200000 0 0x200000>;
+			reg = <0x0 0x2c200000 0 0x20000>;
 		};
 
 		gic-its@2c400000 {
 			compatible = "arm,gic-v3-its";
 			msi-controller;
 			#msi-cells = <1>;
-			reg = <0x0 0x2c400000 0 0x200000>;
+			reg = <0x0 0x2c400000 0 0x20000>;
 		};
 
 		ppi-partitions {

Documentation/process/index.rst

@@ -25,6 +25,7 @@ Below are the essential guides that every developer should read.
    submitting-patches
    coding-style
    email-clients
+   kernel-enforcement-statement
 
 Other guides to the community that are of interest to most developers are: 
 

Documentation/process/kernel-enforcement-statement.rst

@@ -0,0 +1,147 @@
+Linux Kernel Enforcement Statement
+----------------------------------
+
+As developers of the Linux kernel, we have a keen interest in how our software
+is used and how the license for our software is enforced.  Compliance with the
+reciprocal sharing obligations of GPL-2.0 is critical to the long-term
+sustainability of our software and community.
+
+Although there is a right to enforce the separate copyright interests in the
+contributions made to our community, we share an interest in ensuring that
+individual enforcement actions are conducted in a manner that benefits our
+community and do not have an unintended negative impact on the health and
+growth of our software ecosystem.  In order to deter unhelpful enforcement
+actions, we agree that it is in the best interests of our development
+community to undertake the following commitment to users of the Linux kernel
+on behalf of ourselves and any successors to our copyright interests:
+
+    Notwithstanding the termination provisions of the GPL-2.0, we agree that
+    it is in the best interests of our development community to adopt the
+    following provisions of GPL-3.0 as additional permissions under our
+    license with respect to any non-defensive assertion of rights under the
+    license.
+
+	However, if you cease all violation of this License, then your license
+	from a particular copyright holder is reinstated (a) provisionally,
+	unless and until the copyright holder explicitly and finally
+	terminates your license, and (b) permanently, if the copyright holder
+	fails to notify you of the violation by some reasonable means prior to
+	60 days after the cessation.
+
+	Moreover, your license from a particular copyright holder is
+	reinstated permanently if the copyright holder notifies you of the
+	violation by some reasonable means, this is the first time you have
+	received notice of violation of this License (for any work) from that
+	copyright holder, and you cure the violation prior to 30 days after
+	your receipt of the notice.
+
+Our intent in providing these assurances is to encourage more use of the
+software.  We want companies and individuals to use, modify and distribute
+this software.  We want to work with users in an open and transparent way to
+eliminate any uncertainty about our expectations regarding compliance or
+enforcement that might limit adoption of our software.  We view legal action
+as a last resort, to be initiated only when other community efforts have
+failed to resolve the problem.
+
+Finally, once a non-compliance issue is resolved, we hope the user will feel
+welcome to join us in our efforts on this project.  Working together, we will
+be stronger.
+
+Except where noted below, we speak only for ourselves, and not for any company
+we might work for today, have in the past, or will in the future.
+
+  - Bjorn Andersson (Linaro)
+  - Andrea Arcangeli (Red Hat)
+  - Neil Armstrong
+  - Jens Axboe
+  - Pablo Neira Ayuso
+  - Khalid Aziz
+  - Ralf Baechle
+  - Felipe Balbi
+  - Arnd Bergmann
+  - Ard Biesheuvel
+  - Paolo Bonzini (Red Hat)
+  - Christian Borntraeger
+  - Mark Brown (Linaro)
+  - Paul Burton
+  - Javier Martinez Canillas
+  - Rob Clark
+  - Jonathan Corbet
+  - Vivien Didelot (Savoir-faire Linux)
+  - Hans de Goede (Red Hat)
+  - Mel Gorman (SUSE)
+  - Sven Eckelmann
+  - Alex Elder (Linaro)
+  - Fabio Estevam
+  - Larry Finger
+  - Bhumika Goyal
+  - Andy Gross
+  - Juergen Gross
+  - Shawn Guo
+  - Ulf Hansson
+  - Tejun Heo
+  - Rob Herring
+  - Masami Hiramatsu
+  - Michal Hocko
+  - Simon Horman
+  - Johan Hovold (Hovold Consulting AB)
+  - Christophe JAILLET
+  - Olof Johansson
+  - Lee Jones (Linaro)
+  - Heiner Kallweit
+  - Srinivas Kandagatla
+  - Jan Kara
+  - Shuah Khan (Samsung)
+  - David Kershner
+  - Jaegeuk Kim
+  - Namhyung Kim
+  - Colin Ian King
+  - Jeff Kirsher
+  - Greg Kroah-Hartman (Linux Foundation)
+  - Christian König
+  - Vinod Koul
+  - Krzysztof Kozlowski
+  - Viresh Kumar
+  - Aneesh Kumar K.V
+  - Julia Lawall
+  - Doug Ledford (Red Hat)
+  - Chuck Lever (Oracle)
+  - Daniel Lezcano
+  - Shaohua Li
+  - Xin Long (Red Hat)
+  - Tony Luck
+  - Mike Marshall
+  - Chris Mason
+  - Paul E. McKenney
+  - David S. Miller
+  - Ingo Molnar
+  - Kuninori Morimoto
+  - Borislav Petkov
+  - Jiri Pirko
+  - Josh Poimboeuf
+  - Sebastian Reichel (Collabora)
+  - Guenter Roeck
+  - Joerg Roedel
+  - Leon Romanovsky
+  - Steven Rostedt (VMware)
+  - Ivan Safonov
+  - Ivan Safonov
+  - Anna Schumaker
+  - Jes Sorensen
+  - K.Y. Srinivasan
+  - Heiko Stuebner
+  - Jiri Kosina (SUSE)
+  - Dmitry Torokhov
+  - Linus Torvalds
+  - Thierry Reding
+  - Rik van Riel
+  - Geert Uytterhoeven (Glider bvba)
+  - Daniel Vetter
+  - Linus Walleij
+  - Richard Weinberger
+  - Dan Williams
+  - Rafael J. Wysocki
+  - Arvind Yadav
+  - Masahiro Yamada
+  - Wei Yongjun
+  - Lv Zheng

MAINTAINERS

@@ -9213,7 +9213,6 @@ F:	include/linux/isicom.h
 MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER
 M:	Bin Liu <b-liu@ti.com>
 L:	linux-usb@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
 S:	Maintained
 F:	drivers/usb/musb/
 
@@ -10560,6 +10559,8 @@ M:	Peter Zijlstra <peterz@infradead.org>
 M:	Ingo Molnar <mingo@redhat.com>
 M:	Arnaldo Carvalho de Melo <acme@kernel.org>
 R:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+R:	Jiri Olsa <jolsa@redhat.com>
+R:	Namhyung Kim <namhyung@kernel.org>
 L:	linux-kernel@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git perf/core
 S:	Supported

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 14
 SUBLEVEL = 0
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
 NAME = Fearless Coyote
 
 # *DOCUMENTATION*

arch/arm/Makefile

@@ -131,7 +131,7 @@ endif
 KBUILD_CFLAGS	+=$(CFLAGS_ABI) $(CFLAGS_ISA) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
 KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(AFLAGS_ISA) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float
 
-CHECKFLAGS	+= -D__arm__
+CHECKFLAGS	+= -D__arm__ -m32
 
 #Default value
 head-y		:= arch/arm/kernel/head$(MMUEXT).o

arch/arm/boot/compressed/debug.S

@@ -23,7 +23,11 @@ ENTRY(putc)
 	strb	r0, [r1]
 	mov	r0, #0x03		@ SYS_WRITEC
    ARM(	svc	#0x123456	)
+#ifdef CONFIG_CPU_V7M
+ THUMB(	bkpt	#0xab		)
+#else
  THUMB(	svc	#0xab		)
+#endif
 	mov	pc, lr
 	.align	2
 1:	.word	_GLOBAL_OFFSET_TABLE_ - .

arch/arm/boot/dts/armada-38x.dtsi

@@ -178,7 +178,7 @@
 			};
 
 			i2c0: i2c@11000 {
-				compatible = "marvell,mv64xxx-i2c";
+				compatible = "marvell,mv78230-a0-i2c", "marvell,mv64xxx-i2c";
 				reg = <0x11000 0x20>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -189,7 +189,7 @@
 			};
 
 			i2c1: i2c@11100 {
-				compatible = "marvell,mv64xxx-i2c";
+				compatible = "marvell,mv78230-a0-i2c", "marvell,mv64xxx-i2c";
 				reg = <0x11100 0x20>;
 				#address-cells = <1>;
 				#size-cells = <0>;

arch/arm/boot/dts/at91-sama5d27_som1.dtsi

@@ -67,8 +67,8 @@
 				pinctrl-0 = <&pinctrl_macb0_default>;
 				phy-mode = "rmii";
 
-				ethernet-phy@1 {
-					reg = <0x1>;
+				ethernet-phy@0 {
+					reg = <0x0>;
 					interrupt-parent = <&pioA>;
 					interrupts = <PIN_PD31 IRQ_TYPE_LEVEL_LOW>;
 					pinctrl-names = "default";

arch/arm/boot/dts/at91-sama5d2_xplained.dts

@@ -309,7 +309,7 @@
 				vddana-supply = <&vdd_3v3_lp_reg>;
 				vref-supply = <&vdd_3v3_lp_reg>;
 				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_adc_default>;
+				pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
 				status = "okay";
 			};
 
@@ -340,6 +340,20 @@
 					bias-disable;
 				};
 
+				/*
+				 * The ADTRG pin can work on any edge type.
+				 * In here it's being pulled up, so need to
+				 * connect it to ground to get an edge e.g.
+				 * Trigger can be configured on falling, rise
+				 * or any edge, and the pull-up can be changed
+				 * to pull-down or left floating according to
+				 * needs.
+				 */
+				pinctrl_adtrg_default: adtrg_default {
+					pinmux = <PIN_PD31__ADTRG>;
+					bias-pull-up;
+				};
+
 				pinctrl_charger_chglev: charger_chglev {
 					pinmux = <PIN_PA12__GPIO>;
 					bias-disable;

arch/arm/boot/dts/bcm2835-rpi-zero-w.dts

@@ -18,12 +18,9 @@
 	compatible = "raspberrypi,model-zero-w", "brcm,bcm2835";
 	model = "Raspberry Pi Zero W";
 
-	/* Needed by firmware to properly init UARTs */
-	aliases {
-		uart0 = "/soc/serial@7e201000";
-		uart1 = "/soc/serial@7e215040";
-		serial0 = "/soc/serial@7e201000";
-		serial1 = "/soc/serial@7e215040";
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
 	};
 
 	leds {

arch/arm/boot/dts/bcm2837-rpi-3-b.dts

@@ -8,6 +8,11 @@
 	compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
 	model = "Raspberry Pi 3 Model B";
 
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+
 	memory {
 		reg = <0 0x40000000>;
 	};

arch/arm/boot/dts/bcm283x.dtsi

@@ -20,8 +20,13 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
 	chosen {
-		bootargs = "earlyprintk console=ttyAMA0";
+		stdout-path = "serial0:115200n8";
 	};
 
 	thermal-zones {

arch/arm/boot/dts/gemini.dtsi

@@ -145,11 +145,12 @@
 		};
 
 		watchdog@41000000 {
-			compatible = "cortina,gemini-watchdog";
+			compatible = "cortina,gemini-watchdog", "faraday,ftwdt010";
 			reg = <0x41000000 0x1000>;
 			interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
 			resets = <&syscon GEMINI_RESET_WDOG>;
 			clocks = <&syscon GEMINI_CLK_APB>;
+			clock-names = "PCLK";
 		};
 
 		uart0: serial@42000000 {

arch/arm/boot/dts/imx7d.dtsi

@@ -144,10 +144,10 @@
 		interrupt-names = "msi";
 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0 0 0x7>;
-		interrupt-map = <0 0 0 1 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 2 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 3 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 4 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-map = <0 0 0 1 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>,
 			 <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>,
 			 <&clks IMX7D_PCIE_PHY_ROOT_CLK>;

arch/arm/boot/dts/moxart.dtsi

@@ -87,9 +87,10 @@
 		};
 
 		watchdog: watchdog@98500000 {
-			compatible = "moxa,moxart-watchdog";
+			compatible = "moxa,moxart-watchdog", "faraday,ftwdt010";
 			reg = <0x98500000 0x10>;
 			clocks = <&clk_apb>;
+			clock-names = "PCLK";
 		};
 
 		sdhci: sdhci@98e00000 {

arch/arm/boot/dts/sama5d2.dtsi

@@ -1430,6 +1430,7 @@
 				atmel,min-sample-rate-hz = <200000>;
 				atmel,max-sample-rate-hz = <20000000>;
 				atmel,startup-time-ms = <4>;
+				atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};
 

arch/arm/boot/dts/sun6i-a31.dtsi

@@ -311,8 +311,8 @@
 					#size-cells = <0>;
 					reg = <0>;
 
-					tcon1_in_drc1: endpoint@0 {
-						reg = <0>;
+					tcon1_in_drc1: endpoint@1 {
+						reg = <1>;
 						remote-endpoint = <&drc1_out_tcon1>;
 					};
 				};
@@ -1012,8 +1012,8 @@
 					#size-cells = <0>;
 					reg = <1>;
 
-					be1_out_drc1: endpoint@0 {
-						reg = <0>;
+					be1_out_drc1: endpoint@1 {
+						reg = <1>;
 						remote-endpoint = <&drc1_in_be1>;
 					};
 				};
@@ -1042,8 +1042,8 @@
 					#size-cells = <0>;
 					reg = <0>;
 
-					drc1_in_be1: endpoint@0 {
-						reg = <0>;
+					drc1_in_be1: endpoint@1 {
+						reg = <1>;
 						remote-endpoint = <&be1_out_drc1>;
 					};
 				};
@@ -1053,8 +1053,8 @@
 					#size-cells = <0>;
 					reg = <1>;
 
-					drc1_out_tcon1: endpoint@0 {
-						reg = <0>;
+					drc1_out_tcon1: endpoint@1 {
+						reg = <1>;
 						remote-endpoint = <&tcon1_in_drc1>;
 					};
 				};

arch/arm/kernel/debug.S

@@ -115,7 +115,11 @@ ENTRY(printascii)
 		mov	r1, r0
 		mov	r0, #0x04		@ SYS_WRITE0
 	ARM(	svc	#0x123456	)
+#ifdef CONFIG_CPU_V7M
+	THUMB(	bkpt	#0xab		)
+#else
 	THUMB(	svc	#0xab		)
+#endif
 		ret	lr
 ENDPROC(printascii)
 
@@ -124,7 +128,11 @@ ENTRY(printch)
 		strb	r0, [r1]
 		mov	r0, #0x03		@ SYS_WRITEC
 	ARM(	svc	#0x123456	)
+#ifdef CONFIG_CPU_V7M
+	THUMB(	bkpt	#0xab		)
+#else
 	THUMB(	svc	#0xab		)
+#endif
 		ret	lr
 ENDPROC(printch)
 

arch/arm/mach-ux500/cpu-db8500.c

@@ -32,6 +32,7 @@
 #include <asm/mach/arch.h>
 
 #include "db8500-regs.h"
+#include "pm_domains.h"
 
 static int __init ux500_l2x0_unlock(void)
 {
@@ -157,6 +158,9 @@ static const struct of_device_id u8500_local_bus_nodes[] = {
 
 static void __init u8500_init_machine(void)
 {
+	/* Initialize ux500 power domains */
+	ux500_pm_domains_init();
+
 	/* automatically probe child nodes of dbx5x0 devices */
 	if (of_machine_is_compatible("st-ericsson,u8540"))
 		of_platform_populate(NULL, u8500_local_bus_nodes,

arch/arm/mach-ux500/pm.c

@@ -19,7 +19,6 @@
 #include <linux/of_address.h>
 
 #include "db8500-regs.h"
-#include "pm_domains.h"
 
 /* ARM WFI Standby signal register */
 #define PRCM_ARM_WFI_STANDBY    (prcmu_base + 0x130)
@@ -203,7 +202,4 @@ void __init ux500_pm_init(u32 phy_base, u32 size)
 
 	/* Set up ux500 suspend callbacks. */
 	suspend_set_ops(UX500_SUSPEND_OPS);
-
-	/* Initialize ux500 power domains */
-	ux500_pm_domains_init();
 }

arch/arm/mm/nommu.c

@@ -344,6 +344,11 @@ void __init arm_mm_memblock_reserve(void)
 	 * reserved here.
 	 */
 #endif
+	/*
+	 * In any case, always ensure address 0 is never used as many things
+	 * get very confused if 0 is returned as a legitimate address.
+	 */
+	memblock_reserve(0, 1);
 }
 
 void __init adjust_lowmem_bounds(void)

arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts

@@ -61,13 +61,6 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
-
-	reg_vcc3v3: vcc3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
 };
 
 &ehci0 {
@@ -91,7 +84,7 @@
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins>;
-	vmmc-supply = <&reg_vcc3v3>;
+	vmmc-supply = <&reg_dcdc1>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
 	cd-inverted;
 	disable-wp;

arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi

@@ -336,7 +336,7 @@
 				/* non-prefetchable memory */
 				0x82000000 0 0xf6000000 0  0xf6000000 0 0xf00000>;
 			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &cpm_icu 0 ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 0 &cpm_icu ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
 			interrupts = <ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
 			num-lanes = <1>;
 			clocks = <&cpm_clk 1 13>;
@@ -362,7 +362,7 @@
 				/* non-prefetchable memory */
 				0x82000000 0 0xf7000000 0  0xf7000000 0 0xf00000>;
 			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &cpm_icu 0 ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 0 &cpm_icu ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
 			interrupts = <ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
 
 			num-lanes = <1>;
@@ -389,7 +389,7 @@
 				/* non-prefetchable memory */
 				0x82000000 0 0xf8000000 0  0xf8000000 0 0xf00000>;
 			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &cpm_icu 0 ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 0 &cpm_icu ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
 			interrupts = <ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
 
 			num-lanes = <1>;

arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi

@@ -335,7 +335,7 @@
 				/* non-prefetchable memory */
 				0x82000000 0 0xfa000000 0  0xfa000000 0 0xf00000>;
 			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &cps_icu 0 ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 0 &cps_icu ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
 			interrupts = <ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
 			num-lanes = <1>;
 			clocks = <&cps_clk 1 13>;
@@ -361,7 +361,7 @@
 				/* non-prefetchable memory */
 				0x82000000 0 0xfb000000 0  0xfb000000 0 0xf00000>;
 			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &cps_icu 0 ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 0 &cps_icu ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
 			interrupts = <ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
 
 			num-lanes = <1>;
@@ -388,7 +388,7 @@
 				/* non-prefetchable memory */
 				0x82000000 0 0xfc000000 0  0xfc000000 0 0xf00000>;
 			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &cps_icu 0 ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 0 &cps_icu ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
 			interrupts = <ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
 
 			num-lanes = <1>;

arch/arm64/boot/dts/renesas/salvator-common.dtsi

@@ -62,6 +62,7 @@
 		brightness-levels = <256 128 64 16 8 4 0>;
 		default-brightness-level = <6>;
 
+		power-supply = <&reg_12v>;
 		enable-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
 	};
 
@@ -83,6 +84,15 @@
 		regulator-always-on;
 	};
 
+	reg_12v: regulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	rsnd_ak4613: sound {
 		compatible = "simple-audio-card";
 

arch/arm64/boot/dts/rockchip/rk3328.dtsi

@@ -582,7 +582,7 @@
 	vop_mmu: iommu@ff373f00 {
 		compatible = "rockchip,iommu";
 		reg = <0x0 0xff373f00 0x0 0x100>;
-		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "vop_mmu";
 		#iommu-cells = <0>;
 		status = "disabled";

arch/arm64/boot/dts/rockchip/rk3368.dtsi

@@ -740,7 +740,7 @@
 	iep_mmu: iommu@ff900800 {
 		compatible = "rockchip,iommu";
 		reg = <0x0 0xff900800 0x0 0x100>;
-		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "iep_mmu";
 		#iommu-cells = <0>;
 		status = "disabled";

arch/arm64/boot/dts/rockchip/rk3399-firefly.dts

@@ -371,10 +371,10 @@
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
+				regulator-max-microvolt = <3000000>;
 				regulator-state-mem {
 					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
+					regulator-suspend-microvolt = <3000000>;
 				};
 			};
 

arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi

@@ -325,12 +325,12 @@
 			vcc_sd: LDO_REG4 {
 				regulator-name = "vcc_sd";
 				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
+				regulator-max-microvolt = <3000000>;
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
+					regulator-suspend-microvolt = <3000000>;
 				};
 			};
 

arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi

@@ -315,10 +315,10 @@
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
+				regulator-max-microvolt = <3000000>;
 				regulator-state-mem {
 					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
+					regulator-suspend-microvolt = <3000000>;
 				};
 			};
 

arch/parisc/kernel/parisc_ksyms.c

@@ -35,12 +35,12 @@ EXPORT_SYMBOL(memset);
 EXPORT_SYMBOL(__xchg8);
 EXPORT_SYMBOL(__xchg32);
 EXPORT_SYMBOL(__cmpxchg_u32);
+EXPORT_SYMBOL(__cmpxchg_u64);
 #ifdef CONFIG_SMP
 EXPORT_SYMBOL(__atomic_hash);
 #endif
 #ifdef CONFIG_64BIT
 EXPORT_SYMBOL(__xchg64);
-EXPORT_SYMBOL(__cmpxchg_u64);
 #endif
 
 #include <linux/uaccess.h>

arch/parisc/kernel/syscall.S

@@ -742,7 +742,7 @@ lws_compare_and_swap_2:
 10:	ldd	0(%r25), %r25
 11:	ldd	0(%r24), %r24
 #else
-	/* Load new value into r22/r23 - high/low */
+	/* Load old value into r22/r23 - high/low */
 10:	ldw	0(%r25), %r22
 11:	ldw	4(%r25), %r23
 	/* Load new value into fr4 for atomic store later */
@@ -834,11 +834,11 @@ cas2_action:
 	copy	%r0, %r28
 #else
 	/* Compare first word */
-19:	ldw,ma	0(%r26), %r29
+19:	ldw	0(%r26), %r29
 	sub,=	%r29, %r22, %r0
 	b,n	cas2_end
 	/* Compare second word */
-20:	ldw,ma	4(%r26), %r29
+20:	ldw	4(%r26), %r29
 	sub,=	%r29, %r23, %r0
 	b,n	cas2_end
 	/* Perform the store */

arch/parisc/kernel/time.c

@@ -253,7 +253,10 @@ static int __init init_cr16_clocksource(void)
 		cpu0_loc = per_cpu(cpu_data, 0).cpu_loc;
 
 		for_each_online_cpu(cpu) {
-			if (cpu0_loc == per_cpu(cpu_data, cpu).cpu_loc)
+			if (cpu == 0)
+				continue;
+			if ((cpu0_loc != 0) &&
+			    (cpu0_loc == per_cpu(cpu_data, cpu).cpu_loc))
 				continue;
 
 			clocksource_cr16.name = "cr16_unstable";

arch/s390/configs/zfcpdump_defconfig

@@ -27,6 +27,7 @@ CONFIG_NET=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_BLK_DEV_RAM=y
 # CONFIG_BLK_DEV_XPRAM is not set
 # CONFIG_DCSSBLK is not set
 # CONFIG_DASD is not set
@@ -59,6 +60,7 @@ CONFIG_CONFIGFS_FS=y
 # CONFIG_NETWORK_FILESYSTEMS is not set
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_PANIC_ON_OOPS=y
 # CONFIG_SCHED_DEBUG is not set

arch/s390/kernel/smp.c

@@ -293,7 +293,10 @@ static void pcpu_attach_task(struct pcpu *pcpu, struct task_struct *tsk)
 	lc->lpp = LPP_MAGIC;
 	lc->current_pid = tsk->pid;
 	lc->user_timer = tsk->thread.user_timer;
+	lc->guest_timer = tsk->thread.guest_timer;
 	lc->system_timer = tsk->thread.system_timer;
+	lc->hardirq_timer = tsk->thread.hardirq_timer;
+	lc->softirq_timer = tsk->thread.softirq_timer;
 	lc->steal_timer = 0;
 }
 

arch/x86/include/asm/io.h

@@ -110,6 +110,10 @@ build_mmio_write(__writeq, "q", unsigned long, "r", )
 
 #endif
 
+#define ARCH_HAS_VALID_PHYS_ADDR_RANGE
+extern int valid_phys_addr_range(phys_addr_t addr, size_t size);
+extern int valid_mmap_phys_addr_range(unsigned long pfn, size_t size);
+
 /**
  *	virt_to_phys	-	map virtual addresses to physical
  *	@address: address to remap

arch/x86/include/asm/tlbflush.h

@@ -82,12 +82,21 @@ static inline u64 inc_mm_tlb_gen(struct mm_struct *mm)
 #define __flush_tlb_single(addr) __native_flush_tlb_single(addr)
 #endif
 
-/*
- * If tlb_use_lazy_mode is true, then we try to avoid switching CR3 to point
- * to init_mm when we switch to a kernel thread (e.g. the idle thread).  If
- * it's false, then we immediately switch CR3 when entering a kernel thread.
- */
-DECLARE_STATIC_KEY_TRUE(tlb_use_lazy_mode);
+static inline bool tlb_defer_switch_to_init_mm(void)
+{
+	/*
+	 * If we have PCID, then switching to init_mm is reasonably
+	 * fast.  If we don't have PCID, then switching to init_mm is
+	 * quite slow, so we try to defer it in the hopes that we can
+	 * avoid it entirely.  The latter approach runs the risk of
+	 * receiving otherwise unnecessary IPIs.
+	 *
+	 * This choice is just a heuristic.  The tlb code can handle this
+	 * function returning true or false regardless of whether we have
+	 * PCID.
+	 */
+	return !static_cpu_has(X86_FEATURE_PCID);
+}
 
 /*
  * 6 because 6 should be plenty and struct tlb_state will fit in

arch/x86/kernel/cpu/intel_cacheinfo.c

@@ -831,7 +831,6 @@ static int __cache_amd_cpumap_setup(unsigned int cpu, int index,
 	} else if (boot_cpu_has(X86_FEATURE_TOPOEXT)) {
 		unsigned int apicid, nshared, first, last;
 
-		this_leaf = this_cpu_ci->info_list + index;
 		nshared = base->eax.split.num_threads_sharing + 1;
 		apicid = cpu_data(cpu).apicid;
 		first = apicid - (apicid % nshared);

arch/x86/kernel/cpu/microcode/intel.c

@@ -34,6 +34,7 @@
 #include <linux/mm.h>
 
 #include <asm/microcode_intel.h>
+#include <asm/intel-family.h>
 #include <asm/processor.h>
 #include <asm/tlbflush.h>
 #include <asm/setup.h>
@@ -918,6 +919,18 @@ static int get_ucode_fw(void *to, const void *from, size_t n)
 	return 0;
 }
 
+static bool is_blacklisted(unsigned int cpu)
+{
+	struct cpuinfo_x86 *c = &cpu_data(cpu);
+
+	if (c->x86 == 6 && c->x86_model == INTEL_FAM6_BROADWELL_X) {
+		pr_err_once("late loading on model 79 is disabled.\n");
+		return true;
+	}
+
+	return false;
+}
+
 static enum ucode_state request_microcode_fw(int cpu, struct device *device,
 					     bool refresh_fw)
 {
@@ -926,6 +939,9 @@ static enum ucode_state request_microcode_fw(int cpu, struct device *device,
 	const struct firmware *firmware;
 	enum ucode_state ret;
 
+	if (is_blacklisted(cpu))
+		return UCODE_NFOUND;
+
 	sprintf(name, "intel-ucode/%02x-%02x-%02x",
 		c->x86, c->x86_model, c->x86_mask);
 
@@ -950,6 +966,9 @@ static int get_ucode_user(void *to, const void *from, size_t n)
 static enum ucode_state
 request_microcode_user(int cpu, const void __user *buf, size_t size)
 {
+	if (is_blacklisted(cpu))
+		return UCODE_NFOUND;
+
 	return generic_load_microcode(cpu, (void *)buf, size, &get_ucode_user);
 }
 

arch/x86/kernel/head32.c

@@ -30,10 +30,11 @@ static void __init i386_default_early_setup(void)
 
 asmlinkage __visible void __init i386_start_kernel(void)
 {
-	cr4_init_shadow();
-
+	/* Make sure IDT is set up before any exception happens */
 	idt_setup_early_handler();
 
+	cr4_init_shadow();
+
 	sanitize_boot_params(&boot_params);
 
 	x86_early_init_platform_quirks();

arch/x86/mm/mmap.c

@@ -174,3 +174,15 @@ const char *arch_vma_name(struct vm_area_struct *vma)
 		return "[mpx]";
 	return NULL;
 }
+
+int valid_phys_addr_range(phys_addr_t addr, size_t count)
+{
+	return addr + count <= __pa(high_memory);
+}
+
+int valid_mmap_phys_addr_range(unsigned long pfn, size_t count)
+{
+	phys_addr_t addr = (phys_addr_t)pfn << PAGE_SHIFT;
+
+	return valid_phys_addr_range(addr, count);
+}

arch/x86/mm/tlb.c

@@ -30,7 +30,6 @@
 
 atomic64_t last_mm_ctx_id = ATOMIC64_INIT(1);
 
-DEFINE_STATIC_KEY_TRUE(tlb_use_lazy_mode);
 
 static void choose_new_asid(struct mm_struct *next, u64 next_tlb_gen,
 			    u16 *new_asid, bool *need_flush)
@@ -147,8 +146,8 @@ void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next,
 	this_cpu_write(cpu_tlbstate.is_lazy, false);
 
 	if (real_prev == next) {
-		VM_BUG_ON(this_cpu_read(cpu_tlbstate.ctxs[prev_asid].ctx_id) !=
-			  next->context.ctx_id);
+		VM_WARN_ON(this_cpu_read(cpu_tlbstate.ctxs[prev_asid].ctx_id) !=
+			   next->context.ctx_id);
 
 		/*
 		 * We don't currently support having a real mm loaded without
@@ -213,6 +212,9 @@ void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next,
 }
 
 /*
+ * Please ignore the name of this function.  It should be called
+ * switch_to_kernel_thread().
+ *
  * enter_lazy_tlb() is a hint from the scheduler that we are entering a
  * kernel thread or other context without an mm.  Acceptable implementations
  * include doing nothing whatsoever, switching to init_mm, or various clever
@@ -227,7 +229,7 @@ void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
 	if (this_cpu_read(cpu_tlbstate.loaded_mm) == &init_mm)
 		return;
 
-	if (static_branch_unlikely(&tlb_use_lazy_mode)) {
+	if (tlb_defer_switch_to_init_mm()) {
 		/*
 		 * There's a significant optimization that may be possible
 		 * here.  We have accurate enough TLB flush tracking that we
@@ -626,57 +628,3 @@ static int __init create_tlb_single_page_flush_ceiling(void)
 	return 0;
 }
 late_initcall(create_tlb_single_page_flush_ceiling);
-
-static ssize_t tlblazy_read_file(struct file *file, char __user *user_buf,
-				 size_t count, loff_t *ppos)
-{
-	char buf[2];
-
-	buf[0] = static_branch_likely(&tlb_use_lazy_mode) ? '1' : '0';
-	buf[1] = '\n';
-
-	return simple_read_from_buffer(user_buf, count, ppos, buf, 2);
-}
-
-static ssize_t tlblazy_write_file(struct file *file,
-		 const char __user *user_buf, size_t count, loff_t *ppos)
-{
-	bool val;
-
-	if (kstrtobool_from_user(user_buf, count, &val))
-		return -EINVAL;
-
-	if (val)
-		static_branch_enable(&tlb_use_lazy_mode);
-	else
-		static_branch_disable(&tlb_use_lazy_mode);
-
-	return count;
-}
-
-static const struct file_operations fops_tlblazy = {
-	.read = tlblazy_read_file,
-	.write = tlblazy_write_file,
-	.llseek = default_llseek,
-};
-
-static int __init init_tlb_use_lazy_mode(void)
-{
-	if (boot_cpu_has(X86_FEATURE_PCID)) {
-		/*
-		 * Heuristic: with PCID on, switching to and from
-		 * init_mm is reasonably fast, but remote flush IPIs
-		 * as expensive as ever, so turn off lazy TLB mode.
-		 *
-		 * We can't do this in setup_pcid() because static keys
-		 * haven't been initialized yet, and it would blow up
-		 * badly.
-		 */
-		static_branch_disable(&tlb_use_lazy_mode);
-	}
-
-	debugfs_create_file("tlb_use_lazy_mode", S_IRUSR | S_IWUSR,
-			    arch_debugfs_dir, NULL, &fops_tlblazy);
-	return 0;
-}
-late_initcall(init_tlb_use_lazy_mode);

crypto/asymmetric_keys/asymmetric_type.c

@@ -57,6 +57,8 @@ struct key *find_asymmetric_key(struct key *keyring,
 	char *req, *p;
 	int len;
 
+	BUG_ON(!id_0 && !id_1);
+
 	if (id_0) {
 		lookup = id_0->data;
 		len = id_0->len;
@@ -105,7 +107,7 @@ struct key *find_asymmetric_key(struct key *keyring,
 	if (id_0 && id_1) {
 		const struct asymmetric_key_ids *kids = asymmetric_key_ids(key);
 
-		if (!kids->id[0]) {
+		if (!kids->id[1]) {
 			pr_debug("First ID matches, but second is missing\n");
 			goto reject;
 		}

crypto/asymmetric_keys/pkcs7_parser.c

@@ -88,6 +88,9 @@ static int pkcs7_check_authattrs(struct pkcs7_message *msg)
 	bool want = false;
 
 	sinfo = msg->signed_infos;
+	if (!sinfo)
+		goto inconsistent;
+
 	if (sinfo->authattrs) {
 		want = true;
 		msg->have_authattrs = true;

drivers/android/binder.c

@@ -3662,12 +3662,6 @@ static void binder_stat_br(struct binder_proc *proc,
 	}
 }
 
-static int binder_has_thread_work(struct binder_thread *thread)
-{
-	return !binder_worklist_empty(thread->proc, &thread->todo) ||
-		thread->looper_need_return;
-}
-
 static int binder_put_node_cmd(struct binder_proc *proc,
 			       struct binder_thread *thread,
 			       void __user **ptrp,
@@ -4297,12 +4291,9 @@ static unsigned int binder_poll(struct file *filp,
 
 	binder_inner_proc_unlock(thread->proc);
 
-	if (binder_has_work(thread, wait_for_proc_work))
-		return POLLIN;
-
 	poll_wait(filp, &thread->wait, wait);
 
-	if (binder_has_thread_work(thread))
+	if (binder_has_work(thread, wait_for_proc_work))
 		return POLLIN;
 
 	return 0;

drivers/android/binder_alloc.c

@@ -215,17 +215,12 @@ static int binder_update_page_range(struct binder_alloc *alloc, int allocate,
 		}
 	}
 
-	if (!vma && need_mm)
-		mm = get_task_mm(alloc->tsk);
+	if (!vma && need_mm && mmget_not_zero(alloc->vma_vm_mm))
+		mm = alloc->vma_vm_mm;
 
 	if (mm) {
 		down_write(&mm->mmap_sem);
 		vma = alloc->vma;
-		if (vma && mm != alloc->vma_vm_mm) {
-			pr_err("%d: vma mm and task mm mismatch\n",
-				alloc->pid);
-			vma = NULL;
-		}
 	}
 
 	if (!vma && need_mm) {
@@ -565,7 +560,7 @@ static void binder_delete_free_buffer(struct binder_alloc *alloc,
 		binder_alloc_debug(BINDER_DEBUG_BUFFER_ALLOC,
 				   "%d: merge free, buffer %pK do not share page with %pK or %pK\n",
 				   alloc->pid, buffer->data,
-				   prev->data, next->data);
+				   prev->data, next ? next->data : NULL);
 		binder_update_page_range(alloc, 0, buffer_start_page(buffer),
 					 buffer_start_page(buffer) + PAGE_SIZE,
 					 NULL);
@@ -720,6 +715,7 @@ int binder_alloc_mmap_handler(struct binder_alloc *alloc,
 	barrier();
 	alloc->vma = vma;
 	alloc->vma_vm_mm = vma->vm_mm;
+	mmgrab(alloc->vma_vm_mm);
 
 	return 0;
 
@@ -795,6 +791,8 @@ void binder_alloc_deferred_release(struct binder_alloc *alloc)
 		vfree(alloc->buffer);
 	}
 	mutex_unlock(&alloc->mutex);
+	if (alloc->vma_vm_mm)
+		mmdrop(alloc->vma_vm_mm);
 
 	binder_alloc_debug(BINDER_DEBUG_OPEN_CLOSE,
 		     "%s: %d buffers %d, pages %d\n",
@@ -889,7 +887,6 @@ int binder_alloc_get_allocated_count(struct binder_alloc *alloc)
 void binder_alloc_vma_close(struct binder_alloc *alloc)
 {
 	WRITE_ONCE(alloc->vma, NULL);
-	WRITE_ONCE(alloc->vma_vm_mm, NULL);
 }
 
 /**
@@ -926,9 +923,9 @@ enum lru_status binder_alloc_free_page(struct list_head *item,
 	page_addr = (uintptr_t)alloc->buffer + index * PAGE_SIZE;
 	vma = alloc->vma;
 	if (vma) {
-		mm = get_task_mm(alloc->tsk);
-		if (!mm)
-			goto err_get_task_mm_failed;
+		if (!mmget_not_zero(alloc->vma_vm_mm))
+			goto err_mmget;
+		mm = alloc->vma_vm_mm;
 		if (!down_write_trylock(&mm->mmap_sem))
 			goto err_down_write_mmap_sem_failed;
 	}
@@ -963,7 +960,7 @@ enum lru_status binder_alloc_free_page(struct list_head *item,
 
 err_down_write_mmap_sem_failed:
 	mmput_async(mm);
-err_get_task_mm_failed:
+err_mmget:
 err_page_already_freed:
 	mutex_unlock(&alloc->mutex);
 err_get_alloc_mutex_failed:
@@ -1002,7 +999,6 @@ struct shrinker binder_shrinker = {
  */
 void binder_alloc_init(struct binder_alloc *alloc)
 {
-	alloc->tsk = current->group_leader;
 	alloc->pid = current->group_leader->pid;
 	mutex_init(&alloc->mutex);
 	INIT_LIST_HEAD(&alloc->buffers);

drivers/android/binder_alloc.h

@@ -100,7 +100,6 @@ struct binder_lru_page {
  */
 struct binder_alloc {
 	struct mutex mutex;
-	struct task_struct *tsk;
 	struct vm_area_struct *vma;
 	struct mm_struct *vma_vm_mm;
 	void *buffer;

drivers/block/nbd.c

@@ -243,7 +243,6 @@ static void nbd_size_set(struct nbd_device *nbd, loff_t blocksize,
 	struct nbd_config *config = nbd->config;
 	config->blksize = blocksize;
 	config->bytesize = blocksize * nr_blocks;
-	nbd_size_update(nbd);
 }
 
 static void nbd_complete_rq(struct request *req)
@@ -1094,6 +1093,7 @@ static int nbd_start_device(struct nbd_device *nbd)
 		args->index = i;
 		queue_work(recv_workqueue, &args->work);
 	}
+	nbd_size_update(nbd);
 	return error;
 }
 

drivers/block/skd_main.c

@@ -2604,7 +2604,7 @@ static void *skd_alloc_dma(struct skd_device *skdev, struct kmem_cache *s,
 		return NULL;
 	*dma_handle = dma_map_single(dev, buf, s->size, dir);
 	if (dma_mapping_error(dev, *dma_handle)) {
-		kfree(buf);
+		kmem_cache_free(s, buf);
 		buf = NULL;
 	}
 	return buf;

drivers/bus/mvebu-mbus.c

@@ -720,7 +720,7 @@ mvebu_mbus_default_setup_cpu_target(struct mvebu_mbus_state *mbus)
 			if (mbus->hw_io_coherency)
 				w->mbus_attr |= ATTR_HW_COHERENCY;
 			w->base = base & DDR_BASE_CS_LOW_MASK;
-			w->size = (size | ~DDR_SIZE_MASK) + 1;
+			w->size = (u64)(size | ~DDR_SIZE_MASK) + 1;
 		}
 	}
 	mvebu_mbus_dram_info.num_cs = cs;

drivers/clocksource/cs5535-clockevt.c

@@ -117,7 +117,8 @@ static irqreturn_t mfgpt_tick(int irq, void *dev_id)
 	/* Turn off the clock (and clear the event) */
 	disable_timer(cs5535_event_clock);
 
-	if (clockevent_state_shutdown(&cs5535_clockevent))
+	if (clockevent_state_detached(&cs5535_clockevent) ||
+	    clockevent_state_shutdown(&cs5535_clockevent))
 		return IRQ_HANDLED;
 
 	/* Clear the counter */

drivers/dma/altera-msgdma.c

@@ -344,7 +344,7 @@ msgdma_prep_memcpy(struct dma_chan *dchan, dma_addr_t dma_dst,
 
 	spin_lock_irqsave(&mdev->lock, irqflags);
 	if (desc_cnt > mdev->desc_free_cnt) {
-		spin_unlock_bh(&mdev->lock);
+		spin_unlock_irqrestore(&mdev->lock, irqflags);
 		dev_dbg(mdev->dev, "mdev %p descs are not available\n", mdev);
 		return NULL;
 	}
@@ -407,7 +407,7 @@ msgdma_prep_slave_sg(struct dma_chan *dchan, struct scatterlist *sgl,
 
 	spin_lock_irqsave(&mdev->lock, irqflags);
 	if (desc_cnt > mdev->desc_free_cnt) {
-		spin_unlock_bh(&mdev->lock);
+		spin_unlock_irqrestore(&mdev->lock, irqflags);
 		dev_dbg(mdev->dev, "mdev %p descs are not available\n", mdev);
 		return NULL;
 	}

drivers/gpu/drm/amd/scheduler/gpu_scheduler.c

@@ -205,32 +205,17 @@ void amd_sched_entity_fini(struct amd_gpu_scheduler *sched,
 			   struct amd_sched_entity *entity)
 {
 	struct amd_sched_rq *rq = entity->rq;
-	int r;
 
 	if (!amd_sched_entity_is_initialized(sched, entity))
 		return;
+
 	/**
 	 * The client will not queue more IBs during this fini, consume existing
-	 * queued IBs or discard them on SIGKILL
+	 * queued IBs
 	*/
-	if ((current->flags & PF_SIGNALED) && current->exit_code == SIGKILL)
-		r = -ERESTARTSYS;
-	else
-		r = wait_event_killable(sched->job_scheduled,
-					amd_sched_entity_is_idle(entity));
-	amd_sched_rq_remove_entity(rq, entity);
-	if (r) {
-		struct amd_sched_job *job;
+	wait_event(sched->job_scheduled, amd_sched_entity_is_idle(entity));
 
-		/* Park the kernel for a moment to make sure it isn't processing
-		 * our enity.
-		 */
-		kthread_park(sched->thread);
-		kthread_unpark(sched->thread);
-		while (kfifo_out(&entity->job_queue, &job, sizeof(job)))
-			sched->ops->free_job(job);
-
-	}
+	amd_sched_rq_remove_entity(rq, entity);
 	kfifo_free(&entity->job_queue);
 }
 

drivers/gpu/drm/exynos/exynos_drm_drv.c

@@ -168,11 +168,13 @@ static struct drm_driver exynos_drm_driver = {
 static int exynos_drm_suspend(struct device *dev)
 {
 	struct drm_device *drm_dev = dev_get_drvdata(dev);
-	struct exynos_drm_private *private = drm_dev->dev_private;
+	struct exynos_drm_private *private;
 
 	if (pm_runtime_suspended(dev) || !drm_dev)
 		return 0;
 
+	private = drm_dev->dev_private;
+
 	drm_kms_helper_poll_disable(drm_dev);
 	exynos_drm_fbdev_suspend(drm_dev);
 	private->suspend_state = drm_atomic_helper_suspend(drm_dev);
@@ -188,11 +190,12 @@ static int exynos_drm_suspend(struct device *dev)
 static int exynos_drm_resume(struct device *dev)
 {
 	struct drm_device *drm_dev = dev_get_drvdata(dev);
-	struct exynos_drm_private *private = drm_dev->dev_private;
+	struct exynos_drm_private *private;
 
 	if (pm_runtime_suspended(dev) || !drm_dev)
 		return 0;
 
+	private = drm_dev->dev_private;
 	drm_atomic_helper_resume(drm_dev, private->suspend_state);
 	exynos_drm_fbdev_resume(drm_dev);
 	drm_kms_helper_poll_enable(drm_dev);
@@ -427,6 +430,7 @@ static void exynos_drm_unbind(struct device *dev)
 
 	kfree(drm->dev_private);
 	drm->dev_private = NULL;
+	dev_set_drvdata(dev, NULL);
 
 	drm_dev_unref(drm);
 }

drivers/gpu/drm/i915/gvt/sched_policy.c

@@ -308,20 +308,8 @@ static int tbs_sched_init_vgpu(struct intel_vgpu *vgpu)
 
 static void tbs_sched_clean_vgpu(struct intel_vgpu *vgpu)
 {
-	struct intel_gvt_workload_scheduler *scheduler = &vgpu->gvt->scheduler;
-	int ring_id;
-
 	kfree(vgpu->sched_data);
 	vgpu->sched_data = NULL;
-
-	spin_lock_bh(&scheduler->mmio_context_lock);
-	for (ring_id = 0; ring_id < I915_NUM_ENGINES; ring_id++) {
-		if (scheduler->engine_owner[ring_id] == vgpu) {
-			intel_gvt_switch_mmio(vgpu, NULL, ring_id);
-			scheduler->engine_owner[ring_id] = NULL;
-		}
-	}
-	spin_unlock_bh(&scheduler->mmio_context_lock);
 }
 
 static void tbs_sched_start_schedule(struct intel_vgpu *vgpu)
@@ -388,6 +376,7 @@ void intel_vgpu_stop_schedule(struct intel_vgpu *vgpu)
 {
 	struct intel_gvt_workload_scheduler *scheduler =
 		&vgpu->gvt->scheduler;
+	int ring_id;
 
 	gvt_dbg_core("vgpu%d: stop schedule\n", vgpu->id);
 
@@ -401,4 +390,13 @@ void intel_vgpu_stop_schedule(struct intel_vgpu *vgpu)
 		scheduler->need_reschedule = true;
 		scheduler->current_vgpu = NULL;
 	}
+
+	spin_lock_bh(&scheduler->mmio_context_lock);
+	for (ring_id = 0; ring_id < I915_NUM_ENGINES; ring_id++) {
+		if (scheduler->engine_owner[ring_id] == vgpu) {
+			intel_gvt_switch_mmio(vgpu, NULL, ring_id);
+			scheduler->engine_owner[ring_id] = NULL;
+		}
+	}
+	spin_unlock_bh(&scheduler->mmio_context_lock);
 }

drivers/gpu/drm/i915/i915_gem.c

@@ -2657,6 +2657,9 @@ i915_gem_object_pwrite_gtt(struct drm_i915_gem_object *obj,
 	if (READ_ONCE(obj->mm.pages))
 		return -ENODEV;
 
+	if (obj->mm.madv != I915_MADV_WILLNEED)
+		return -EFAULT;
+
 	/* Before the pages are instantiated the object is treated as being
 	 * in the CPU domain. The pages will be clflushed as required before
 	 * use, and we can freely write into the pages directly. If userspace

drivers/gpu/drm/i915/i915_gem_evict.c

@@ -33,21 +33,20 @@
 #include "intel_drv.h"
 #include "i915_trace.h"
 
-static bool ggtt_is_idle(struct drm_i915_private *dev_priv)
+static bool ggtt_is_idle(struct drm_i915_private *i915)
 {
-	struct i915_ggtt *ggtt = &dev_priv->ggtt;
-	struct intel_engine_cs *engine;
-	enum intel_engine_id id;
+       struct intel_engine_cs *engine;
+       enum intel_engine_id id;
 
-	for_each_engine(engine, dev_priv, id) {
-		struct intel_timeline *tl;
+       if (i915->gt.active_requests)
+	       return false;
 
-		tl = &ggtt->base.timeline.engine[engine->id];
-		if (i915_gem_active_isset(&tl->last_request))
-			return false;
-	}
+       for_each_engine(engine, i915, id) {
+	       if (engine->last_retired_context != i915->kernel_context)
+		       return false;
+       }
 
-	return true;
+       return true;
 }
 
 static int ggtt_flush(struct drm_i915_private *i915)
@@ -157,7 +156,8 @@ i915_gem_evict_something(struct i915_address_space *vm,
 				    min_size, alignment, cache_level,
 				    start, end, mode);
 
-	/* Retire before we search the active list. Although we have
+	/*
+	 * Retire before we search the active list. Although we have
 	 * reasonable accuracy in our retirement lists, we may have
 	 * a stray pin (preventing eviction) that can only be resolved by
 	 * retiring.
@@ -182,7 +182,8 @@ search_again:
 		BUG_ON(ret);
 	}
 
-	/* Can we unpin some objects such as idle hw contents,
+	/*
+	 * Can we unpin some objects such as idle hw contents,
 	 * or pending flips? But since only the GGTT has global entries
 	 * such as scanouts, rinbuffers and contexts, we can skip the
 	 * purge when inspecting per-process local address spaces.
@@ -190,19 +191,33 @@ search_again:
 	if (!i915_is_ggtt(vm) || flags & PIN_NONBLOCK)
 		return -ENOSPC;
 
-	if (ggtt_is_idle(dev_priv)) {
-		/* If we still have pending pageflip completions, drop
-		 * back to userspace to give our workqueues time to
-		 * acquire our locks and unpin the old scanouts.
-		 */
-		return intel_has_pending_fb_unpin(dev_priv) ? -EAGAIN : -ENOSPC;
-	}
+	/*
+	 * Not everything in the GGTT is tracked via VMA using
+	 * i915_vma_move_to_active(), otherwise we could evict as required
+	 * with minimal stalling. Instead we are forced to idle the GPU and
+	 * explicitly retire outstanding requests which will then remove
+	 * the pinning for active objects such as contexts and ring,
+	 * enabling us to evict them on the next iteration.
+	 *
+	 * To ensure that all user contexts are evictable, we perform
+	 * a switch to the perma-pinned kernel context. This all also gives
+	 * us a termination condition, when the last retired context is
+	 * the kernel's there is no more we can evict.
+	 */
+	if (!ggtt_is_idle(dev_priv)) {
+		ret = ggtt_flush(dev_priv);
+		if (ret)
+			return ret;
 
-	ret = ggtt_flush(dev_priv);
-	if (ret)
-		return ret;
+		goto search_again;
+	}
 
-	goto search_again;
+	/*
+	 * If we still have pending pageflip completions, drop
+	 * back to userspace to give our workqueues time to
+	 * acquire our locks and unpin the old scanouts.
+	 */
+	return intel_has_pending_fb_unpin(dev_priv) ? -EAGAIN : -ENOSPC;
 
 found:
 	/* drm_mm doesn't allow any other other operations while

drivers/gpu/drm/i915/i915_reg.h

@@ -6998,6 +6998,7 @@ enum {
  */
 #define  L3_GENERAL_PRIO_CREDITS(x)		(((x) >> 1) << 19)
 #define  L3_HIGH_PRIO_CREDITS(x)		(((x) >> 1) << 14)
+#define  L3_PRIO_CREDITS_MASK			((0x1f << 19) | (0x1f << 14))
 
 #define GEN7_L3CNTLREG1				_MMIO(0xB01C)
 #define  GEN7_WA_FOR_GEN7_L3_CONTROL			0x3C47FF8C

drivers/gpu/drm/i915/intel_ddi.c

@@ -664,8 +664,8 @@ intel_ddi_get_buf_trans_fdi(struct drm_i915_private *dev_priv,
 			    int *n_entries)
 {
 	if (IS_BROADWELL(dev_priv)) {
-		*n_entries = ARRAY_SIZE(hsw_ddi_translations_fdi);
-		return hsw_ddi_translations_fdi;
+		*n_entries = ARRAY_SIZE(bdw_ddi_translations_fdi);
+		return bdw_ddi_translations_fdi;
 	} else if (IS_HASWELL(dev_priv)) {
 		*n_entries = ARRAY_SIZE(hsw_ddi_translations_fdi);
 		return hsw_ddi_translations_fdi;
@@ -2102,8 +2102,7 @@ static void intel_ddi_clk_select(struct intel_encoder *encoder,
 		 * register writes.
 		 */
 		val = I915_READ(DPCLKA_CFGCR0);
-		val &= ~(DPCLKA_CFGCR0_DDI_CLK_OFF(port) |
-			 DPCLKA_CFGCR0_DDI_CLK_SEL_MASK(port));
+		val &= ~DPCLKA_CFGCR0_DDI_CLK_OFF(port);
 		I915_WRITE(DPCLKA_CFGCR0, val);
 	} else if (IS_GEN9_BC(dev_priv)) {
 		/* DDI -> PLL mapping  */

drivers/gpu/drm/i915/intel_dpll_mgr.c

@@ -1996,7 +1996,7 @@ static void cnl_ddi_pll_enable(struct drm_i915_private *dev_priv,
 
 	/* 3. Configure DPLL_CFGCR0 */
 	/* Avoid touch CFGCR1 if HDMI mode is not enabled */
-	if (pll->state.hw_state.cfgcr0 & DPLL_CTRL1_HDMI_MODE(pll->id)) {
+	if (pll->state.hw_state.cfgcr0 & DPLL_CFGCR0_HDMI_MODE) {
 		val = pll->state.hw_state.cfgcr1;
 		I915_WRITE(CNL_DPLL_CFGCR1(pll->id), val);
 		/* 4. Reab back to ensure writes completed */

drivers/gpu/drm/i915/intel_engine_cs.c

@@ -1048,9 +1048,12 @@ static int bxt_init_workarounds(struct intel_engine_cs *engine)
 	}
 
 	/* WaProgramL3SqcReg1DefaultForPerf:bxt */
-	if (IS_BXT_REVID(dev_priv, BXT_REVID_B0, REVID_FOREVER))
-		I915_WRITE(GEN8_L3SQCREG1, L3_GENERAL_PRIO_CREDITS(62) |
-					   L3_HIGH_PRIO_CREDITS(2));
+	if (IS_BXT_REVID(dev_priv, BXT_REVID_B0, REVID_FOREVER)) {
+		u32 val = I915_READ(GEN8_L3SQCREG1);
+		val &= ~L3_PRIO_CREDITS_MASK;
+		val |= L3_GENERAL_PRIO_CREDITS(62) | L3_HIGH_PRIO_CREDITS(2);
+		I915_WRITE(GEN8_L3SQCREG1, val);
+	}
 
 	/* WaToEnableHwFixForPushConstHWBug:bxt */
 	if (IS_BXT_REVID(dev_priv, BXT_REVID_C0, REVID_FOREVER))

drivers/gpu/drm/i915/intel_pm.c

@@ -8245,14 +8245,17 @@ static void gen8_set_l3sqc_credits(struct drm_i915_private *dev_priv,
 				   int high_prio_credits)
 {
 	u32 misccpctl;
+	u32 val;
 
 	/* WaTempDisableDOPClkGating:bdw */
 	misccpctl = I915_READ(GEN7_MISCCPCTL);
 	I915_WRITE(GEN7_MISCCPCTL, misccpctl & ~GEN7_DOP_CLOCK_GATE_ENABLE);
 
-	I915_WRITE(GEN8_L3SQCREG1,
-		   L3_GENERAL_PRIO_CREDITS(general_prio_credits) |
-		   L3_HIGH_PRIO_CREDITS(high_prio_credits));
+	val = I915_READ(GEN8_L3SQCREG1);
+	val &= ~L3_PRIO_CREDITS_MASK;
+	val |= L3_GENERAL_PRIO_CREDITS(general_prio_credits);
+	val |= L3_HIGH_PRIO_CREDITS(high_prio_credits);
+	I915_WRITE(GEN8_L3SQCREG1, val);
 
 	/*
 	 * Wait at least 100 clocks before re-enabling clock gating.

drivers/gpu/drm/nouveau/nouveau_fbcon.c

@@ -223,7 +223,7 @@ void
 nouveau_fbcon_accel_save_disable(struct drm_device *dev)
 {
 	struct nouveau_drm *drm = nouveau_drm(dev);
-	if (drm->fbcon) {
+	if (drm->fbcon && drm->fbcon->helper.fbdev) {
 		drm->fbcon->saved_flags = drm->fbcon->helper.fbdev->flags;
 		drm->fbcon->helper.fbdev->flags |= FBINFO_HWACCEL_DISABLED;
 	}
@@ -233,7 +233,7 @@ void
 nouveau_fbcon_accel_restore(struct drm_device *dev)
 {
 	struct nouveau_drm *drm = nouveau_drm(dev);
-	if (drm->fbcon) {
+	if (drm->fbcon && drm->fbcon->helper.fbdev) {
 		drm->fbcon->helper.fbdev->flags = drm->fbcon->saved_flags;
 	}
 }
@@ -245,7 +245,8 @@ nouveau_fbcon_accel_fini(struct drm_device *dev)
 	struct nouveau_fbdev *fbcon = drm->fbcon;
 	if (fbcon && drm->channel) {
 		console_lock();
-		fbcon->helper.fbdev->flags |= FBINFO_HWACCEL_DISABLED;
+		if (fbcon->helper.fbdev)
+			fbcon->helper.fbdev->flags |= FBINFO_HWACCEL_DISABLED;
 		console_unlock();
 		nouveau_channel_idle(drm->channel);
 		nvif_object_fini(&fbcon->twod);

drivers/gpu/drm/nouveau/nv50_display.c

@@ -3265,11 +3265,14 @@ nv50_mstm = {
 void
 nv50_mstm_service(struct nv50_mstm *mstm)
 {
-	struct drm_dp_aux *aux = mstm->mgr.aux;
+	struct drm_dp_aux *aux = mstm ? mstm->mgr.aux : NULL;
 	bool handled = true;
 	int ret;
 	u8 esi[8] = {};
 
+	if (!aux)
+		return;
+
 	while (handled) {
 		ret = drm_dp_dpcd_read(aux, DP_SINK_COUNT_ESI, esi, 8);
 		if (ret != 8) {

drivers/gpu/drm/nouveau/nvkm/engine/bsp/g84.c

@@ -39,5 +39,5 @@ int
 g84_bsp_new(struct nvkm_device *device, int index, struct nvkm_engine **pengine)
 {
 	return nvkm_xtensa_new_(&g84_bsp, device, index,
-				true, 0x103000, pengine);
+				device->chipset != 0x92, 0x103000, pengine);
 }

drivers/gpu/drm/nouveau/nvkm/subdev/mmu/base.c

@@ -241,6 +241,8 @@ nvkm_vm_unmap_pgt(struct nvkm_vm *vm, int big, u32 fpde, u32 lpde)
 			mmu->func->map_pgt(vpgd->obj, pde, vpgt->mem);
 		}
 
+		mmu->func->flush(vm);
+
 		nvkm_memory_del(&pgt);
 	}
 }

drivers/hv/channel_mgmt.c

@@ -937,7 +937,10 @@ void vmbus_hvsock_device_unregister(struct vmbus_channel *channel)
 {
 	BUG_ON(!is_hvsock_channel(channel));
 
-	channel->rescind = true;
+	/* We always get a rescind msg when a connection is closed. */
+	while (!READ_ONCE(channel->probe_done) || !READ_ONCE(channel->rescind))
+		msleep(1);
+
 	vmbus_device_unregister(channel->device_obj);
 }
 EXPORT_SYMBOL_GPL(vmbus_hvsock_device_unregister);

drivers/i2c/busses/i2c-imx.c

@@ -1021,7 +1021,7 @@ static int i2c_imx_init_recovery_info(struct imx_i2c_struct *i2c_imx,
 	}
 
 	dev_dbg(&pdev->dev, "using scl-gpio %d and sda-gpio %d for recovery\n",
-			rinfo->sda_gpio, rinfo->scl_gpio);
+			rinfo->scl_gpio, rinfo->sda_gpio);
 
 	rinfo->prepare_recovery = i2c_imx_prepare_recovery;
 	rinfo->unprepare_recovery = i2c_imx_unprepare_recovery;
@@ -1100,7 +1100,7 @@ static int i2c_imx_probe(struct platform_device *pdev)
 	}
 
 	/* Request IRQ */
-	ret = devm_request_irq(&pdev->dev, irq, i2c_imx_isr, 0,
+	ret = devm_request_irq(&pdev->dev, irq, i2c_imx_isr, IRQF_SHARED,
 				pdev->name, i2c_imx);
 	if (ret) {
 		dev_err(&pdev->dev, "can't claim irq %d\n", irq);

drivers/i2c/busses/i2c-ismt.c

@@ -340,12 +340,15 @@ static int ismt_process_desc(const struct ismt_desc *desc,
 			data->word = dma_buffer[0] | (dma_buffer[1] << 8);
 			break;
 		case I2C_SMBUS_BLOCK_DATA:
-		case I2C_SMBUS_I2C_BLOCK_DATA:
 			if (desc->rxbytes != dma_buffer[0] + 1)
 				return -EMSGSIZE;
 
 			memcpy(data->block, dma_buffer, desc->rxbytes);
 			break;
+		case I2C_SMBUS_I2C_BLOCK_DATA:
+			memcpy(&data->block[1], dma_buffer, desc->rxbytes);
+			data->block[0] = desc->rxbytes;
+			break;
 		}
 		return 0;
 	}

drivers/i2c/busses/i2c-omap.c

@@ -360,6 +360,7 @@ static int omap_i2c_init(struct omap_i2c_dev *omap)
 	unsigned long fclk_rate = 12000000;
 	unsigned long internal_clk = 0;
 	struct clk *fclk;
+	int error;
 
 	if (omap->rev >= OMAP_I2C_REV_ON_3430_3530) {
 		/*
@@ -378,6 +379,13 @@ static int omap_i2c_init(struct omap_i2c_dev *omap)
 		 * do this bit unconditionally.
 		 */
 		fclk = clk_get(omap->dev, "fck");
+		if (IS_ERR(fclk)) {
+			error = PTR_ERR(fclk);
+			dev_err(omap->dev, "could not get fck: %i\n", error);
+
+			return error;
+		}
+
 		fclk_rate = clk_get_rate(fclk);
 		clk_put(fclk);
 
@@ -410,6 +418,12 @@ static int omap_i2c_init(struct omap_i2c_dev *omap)
 		else
 			internal_clk = 4000;
 		fclk = clk_get(omap->dev, "fck");
+		if (IS_ERR(fclk)) {
+			error = PTR_ERR(fclk);
+			dev_err(omap->dev, "could not get fck: %i\n", error);
+
+			return error;
+		}
 		fclk_rate = clk_get_rate(fclk) / 1000;
 		clk_put(fclk);
 

drivers/i2c/busses/i2c-piix4.c

@@ -85,6 +85,9 @@
 /* SB800 constants */
 #define SB800_PIIX4_SMB_IDX		0xcd6
 
+#define KERNCZ_IMC_IDX			0x3e
+#define KERNCZ_IMC_DATA			0x3f
+
 /*
  * SB800 port is selected by bits 2:1 of the smb_en register (0x2c)
  * or the smb_sel register (0x2e), depending on bit 0 of register 0x2f.
@@ -94,6 +97,12 @@
 #define SB800_PIIX4_PORT_IDX_ALT	0x2e
 #define SB800_PIIX4_PORT_IDX_SEL	0x2f
 #define SB800_PIIX4_PORT_IDX_MASK	0x06
+#define SB800_PIIX4_PORT_IDX_SHIFT	1
+
+/* On kerncz, SmBus0Sel is at bit 20:19 of PMx00 DecodeEn */
+#define SB800_PIIX4_PORT_IDX_KERNCZ		0x02
+#define SB800_PIIX4_PORT_IDX_MASK_KERNCZ	0x18
+#define SB800_PIIX4_PORT_IDX_SHIFT_KERNCZ	3
 
 /* insmod parameters */
 
@@ -149,6 +158,8 @@ static const struct dmi_system_id piix4_dmi_ibm[] = {
  */
 static DEFINE_MUTEX(piix4_mutex_sb800);
 static u8 piix4_port_sel_sb800;
+static u8 piix4_port_mask_sb800;
+static u8 piix4_port_shift_sb800;
 static const char *piix4_main_port_names_sb800[PIIX4_MAX_ADAPTERS] = {
 	" port 0", " port 2", " port 3", " port 4"
 };
@@ -159,6 +170,7 @@ struct i2c_piix4_adapdata {
 
 	/* SB800 */
 	bool sb800_main;
+	bool notify_imc;
 	u8 port;		/* Port number, shifted */
 };
 
@@ -347,7 +359,19 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
 
 	/* Find which register is used for port selection */
 	if (PIIX4_dev->vendor == PCI_VENDOR_ID_AMD) {
-		piix4_port_sel_sb800 = SB800_PIIX4_PORT_IDX_ALT;
+		switch (PIIX4_dev->device) {
+		case PCI_DEVICE_ID_AMD_KERNCZ_SMBUS:
+			piix4_port_sel_sb800 = SB800_PIIX4_PORT_IDX_KERNCZ;
+			piix4_port_mask_sb800 = SB800_PIIX4_PORT_IDX_MASK_KERNCZ;
+			piix4_port_shift_sb800 = SB800_PIIX4_PORT_IDX_SHIFT_KERNCZ;
+			break;
+		case PCI_DEVICE_ID_AMD_HUDSON2_SMBUS:
+		default:
+			piix4_port_sel_sb800 = SB800_PIIX4_PORT_IDX_ALT;
+			piix4_port_mask_sb800 = SB800_PIIX4_PORT_IDX_MASK;
+			piix4_port_shift_sb800 = SB800_PIIX4_PORT_IDX_SHIFT;
+			break;
+		}
 	} else {
 		mutex_lock(&piix4_mutex_sb800);
 		outb_p(SB800_PIIX4_PORT_IDX_SEL, SB800_PIIX4_SMB_IDX);
@@ -355,6 +379,8 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
 		piix4_port_sel_sb800 = (port_sel & 0x01) ?
 				       SB800_PIIX4_PORT_IDX_ALT :
 				       SB800_PIIX4_PORT_IDX;
+		piix4_port_mask_sb800 = SB800_PIIX4_PORT_IDX_MASK;
+		piix4_port_shift_sb800 = SB800_PIIX4_PORT_IDX_SHIFT;
 		mutex_unlock(&piix4_mutex_sb800);
 	}
 
@@ -572,6 +598,67 @@ static s32 piix4_access(struct i2c_adapter * adap, u16 addr,
 	return 0;
 }
 
+static uint8_t piix4_imc_read(uint8_t idx)
+{
+	outb_p(idx, KERNCZ_IMC_IDX);
+	return inb_p(KERNCZ_IMC_DATA);
+}
+
+static void piix4_imc_write(uint8_t idx, uint8_t value)
+{
+	outb_p(idx, KERNCZ_IMC_IDX);
+	outb_p(value, KERNCZ_IMC_DATA);
+}
+
+static int piix4_imc_sleep(void)
+{
+	int timeout = MAX_TIMEOUT;
+
+	if (!request_muxed_region(KERNCZ_IMC_IDX, 2, "smbus_kerncz_imc"))
+		return -EBUSY;
+
+	/* clear response register */
+	piix4_imc_write(0x82, 0x00);
+	/* request ownership flag */
+	piix4_imc_write(0x83, 0xB4);
+	/* kick off IMC Mailbox command 96 */
+	piix4_imc_write(0x80, 0x96);
+
+	while (timeout--) {
+		if (piix4_imc_read(0x82) == 0xfa) {
+			release_region(KERNCZ_IMC_IDX, 2);
+			return 0;
+		}
+		usleep_range(1000, 2000);
+	}
+
+	release_region(KERNCZ_IMC_IDX, 2);
+	return -ETIMEDOUT;
+}
+
+static void piix4_imc_wakeup(void)
+{
+	int timeout = MAX_TIMEOUT;
+
+	if (!request_muxed_region(KERNCZ_IMC_IDX, 2, "smbus_kerncz_imc"))
+		return;
+
+	/* clear response register */
+	piix4_imc_write(0x82, 0x00);
+	/* release ownership flag */
+	piix4_imc_write(0x83, 0xB5);
+	/* kick off IMC Mailbox command 96 */
+	piix4_imc_write(0x80, 0x96);
+
+	while (timeout--) {
+		if (piix4_imc_read(0x82) == 0xfa)
+			break;
+		usleep_range(1000, 2000);
+	}
+
+	release_region(KERNCZ_IMC_IDX, 2);
+}
+
 /*
  * Handles access to multiple SMBus ports on the SB800.
  * The port is selected by bits 2:1 of the smb_en register (0x2c).
@@ -612,12 +699,47 @@ static s32 piix4_access_sb800(struct i2c_adapter *adap, u16 addr,
 		return -EBUSY;
 	}
 
+	/*
+	 * Notify the IMC (Integrated Micro Controller) if required.
+	 * Among other responsibilities, the IMC is in charge of monitoring
+	 * the System fans and temperature sensors, and act accordingly.
+	 * All this is done through SMBus and can/will collide
+	 * with our transactions if they are long (BLOCK_DATA).
+	 * Therefore we need to request the ownership flag during those
+	 * transactions.
+	 */
+	if ((size == I2C_SMBUS_BLOCK_DATA) && adapdata->notify_imc) {
+		int ret;
+
+		ret = piix4_imc_sleep();
+		switch (ret) {
+		case -EBUSY:
+			dev_warn(&adap->dev,
+				 "IMC base address index region 0x%x already in use.\n",
+				 KERNCZ_IMC_IDX);
+			break;
+		case -ETIMEDOUT:
+			dev_warn(&adap->dev,
+				 "Failed to communicate with the IMC.\n");
+			break;
+		default:
+			break;
+		}
+
+		/* If IMC communication fails do not retry */
+		if (ret) {
+			dev_warn(&adap->dev,
+				 "Continuing without IMC notification.\n");
+			adapdata->notify_imc = false;
+		}
+	}
+
 	outb_p(piix4_port_sel_sb800, SB800_PIIX4_SMB_IDX);
 	smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1);
 
 	port = adapdata->port;
-	if ((smba_en_lo & SB800_PIIX4_PORT_IDX_MASK) != port)
-		outb_p((smba_en_lo & ~SB800_PIIX4_PORT_IDX_MASK) | port,
+	if ((smba_en_lo & piix4_port_mask_sb800) != port)
+		outb_p((smba_en_lo & ~piix4_port_mask_sb800) | port,
 		       SB800_PIIX4_SMB_IDX + 1);
 
 	retval = piix4_access(adap, addr, flags, read_write,
@@ -628,6 +750,9 @@ static s32 piix4_access_sb800(struct i2c_adapter *adap, u16 addr,
 	/* Release the semaphore */
 	outb_p(smbslvcnt | 0x20, SMBSLVCNT);
 
+	if ((size == I2C_SMBUS_BLOCK_DATA) && adapdata->notify_imc)
+		piix4_imc_wakeup();
+
 	mutex_unlock(&piix4_mutex_sb800);
 
 	return retval;
@@ -679,7 +804,7 @@ static struct i2c_adapter *piix4_main_adapters[PIIX4_MAX_ADAPTERS];
 static struct i2c_adapter *piix4_aux_adapter;
 
 static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba,
-			     bool sb800_main, u8 port,
+			     bool sb800_main, u8 port, bool notify_imc,
 			     const char *name, struct i2c_adapter **padap)
 {
 	struct i2c_adapter *adap;
@@ -706,7 +831,8 @@ static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba,
 
 	adapdata->smba = smba;
 	adapdata->sb800_main = sb800_main;
-	adapdata->port = port << 1;
+	adapdata->port = port << piix4_port_shift_sb800;
+	adapdata->notify_imc = notify_imc;
 
 	/* set up the sysfs linkage to our parent device */
 	adap->dev.parent = &dev->dev;
@@ -728,14 +854,15 @@ static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba,
 	return 0;
 }
 
-static int piix4_add_adapters_sb800(struct pci_dev *dev, unsigned short smba)
+static int piix4_add_adapters_sb800(struct pci_dev *dev, unsigned short smba,
+				    bool notify_imc)
 {
 	struct i2c_piix4_adapdata *adapdata;
 	int port;
 	int retval;
 
 	for (port = 0; port < PIIX4_MAX_ADAPTERS; port++) {
-		retval = piix4_add_adapter(dev, smba, true, port,
+		retval = piix4_add_adapter(dev, smba, true, port, notify_imc,
 					   piix4_main_port_names_sb800[port],
 					   &piix4_main_adapters[port]);
 		if (retval < 0)
@@ -769,6 +896,7 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	     dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS &&
 	     dev->revision >= 0x40) ||
 	    dev->vendor == PCI_VENDOR_ID_AMD) {
+		bool notify_imc = false;
 		is_sb800 = true;
 
 		if (!request_region(SB800_PIIX4_SMB_IDX, 2, "smba_idx")) {
@@ -778,6 +906,20 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id)
 			return -EBUSY;
 		}
 
+		if (dev->vendor == PCI_VENDOR_ID_AMD &&
+		    dev->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS) {
+			u8 imc;
+
+			/*
+			 * Detect if IMC is active or not, this method is
+			 * described on coreboot's AMD IMC notes
+			 */
+			pci_bus_read_config_byte(dev->bus, PCI_DEVFN(0x14, 3),
+						 0x40, &imc);
+			if (imc & 0x80)
+				notify_imc = true;
+		}
+
 		/* base address location etc changed in SB800 */
 		retval = piix4_setup_sb800(dev, id, 0);
 		if (retval < 0) {
@@ -789,7 +931,7 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id)
 		 * Try to register multiplexed main SMBus adapter,
 		 * give up if we can't
 		 */
-		retval = piix4_add_adapters_sb800(dev, retval);
+		retval = piix4_add_adapters_sb800(dev, retval, notify_imc);
 		if (retval < 0) {
 			release_region(SB800_PIIX4_SMB_IDX, 2);
 			return retval;
@@ -800,7 +942,7 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id)
 			return retval;
 
 		/* Try to register main SMBus adapter, give up if we can't */
-		retval = piix4_add_adapter(dev, retval, false, 0, "",
+		retval = piix4_add_adapter(dev, retval, false, 0, false, "",
 					   &piix4_main_adapters[0]);
 		if (retval < 0)
 			return retval;
@@ -827,7 +969,7 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	if (retval > 0) {
 		/* Try to add the aux adapter if it exists,
 		 * piix4_add_adapter will clean up if this fails */
-		piix4_add_adapter(dev, retval, false, 0,
+		piix4_add_adapter(dev, retval, false, 0, false,
 				  is_sb800 ? piix4_aux_port_name_sb800 : "",
 				  &piix4_aux_adapter);
 	}

drivers/iio/adc/Kconfig

@@ -243,6 +243,8 @@ config DA9150_GPADC
 config DLN2_ADC
 	tristate "Diolan DLN-2 ADC driver support"
 	depends on MFD_DLN2
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
 	help
 	  Say yes here to build support for Diolan DLN-2 ADC.
 

drivers/iio/adc/at91-sama5d2_adc.c

@@ -225,6 +225,7 @@ struct at91_adc_trigger {
 	char				*name;
 	unsigned int			trgmod_value;
 	unsigned int			edge_type;
+	bool				hw_trig;
 };
 
 struct at91_adc_state {
@@ -254,16 +255,25 @@ static const struct at91_adc_trigger at91_adc_trigger_list[] = {
 		.name = "external_rising",
 		.trgmod_value = AT91_SAMA5D2_TRGR_TRGMOD_EXT_TRIG_RISE,
 		.edge_type = IRQ_TYPE_EDGE_RISING,
+		.hw_trig = true,
 	},
 	{
 		.name = "external_falling",
 		.trgmod_value = AT91_SAMA5D2_TRGR_TRGMOD_EXT_TRIG_FALL,
 		.edge_type = IRQ_TYPE_EDGE_FALLING,
+		.hw_trig = true,
 	},
 	{
 		.name = "external_any",
 		.trgmod_value = AT91_SAMA5D2_TRGR_TRGMOD_EXT_TRIG_ANY,
 		.edge_type = IRQ_TYPE_EDGE_BOTH,
+		.hw_trig = true,
+	},
+	{
+		.name = "software",
+		.trgmod_value = AT91_SAMA5D2_TRGR_TRGMOD_NO_TRIGGER,
+		.edge_type = IRQ_TYPE_NONE,
+		.hw_trig = false,
 	},
 };
 
@@ -597,7 +607,7 @@ static int at91_adc_probe(struct platform_device *pdev)
 	struct at91_adc_state *st;
 	struct resource	*res;
 	int ret, i;
-	u32 edge_type;
+	u32 edge_type = IRQ_TYPE_NONE;
 
 	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*st));
 	if (!indio_dev)
@@ -641,14 +651,14 @@ static int at91_adc_probe(struct platform_device *pdev)
 	ret = of_property_read_u32(pdev->dev.of_node,
 				   "atmel,trigger-edge-type", &edge_type);
 	if (ret) {
-		dev_err(&pdev->dev,
-			"invalid or missing value for atmel,trigger-edge-type\n");
-		return ret;
+		dev_dbg(&pdev->dev,
+			"atmel,trigger-edge-type not specified, only software trigger available\n");
 	}
 
 	st->selected_trig = NULL;
 
-	for (i = 0; i < AT91_SAMA5D2_HW_TRIG_CNT; i++)
+	/* find the right trigger, or no trigger at all */
+	for (i = 0; i < AT91_SAMA5D2_HW_TRIG_CNT + 1; i++)
 		if (at91_adc_trigger_list[i].edge_type == edge_type) {
 			st->selected_trig = &at91_adc_trigger_list[i];
 			break;
@@ -717,24 +727,27 @@ static int at91_adc_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, indio_dev);
 
-	ret = at91_adc_buffer_init(indio_dev);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "couldn't initialize the buffer.\n");
-		goto per_clk_disable_unprepare;
-	}
+	if (st->selected_trig->hw_trig) {
+		ret = at91_adc_buffer_init(indio_dev);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "couldn't initialize the buffer.\n");
+			goto per_clk_disable_unprepare;
+		}
 
-	ret = at91_adc_trigger_init(indio_dev);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "couldn't setup the triggers.\n");
-		goto per_clk_disable_unprepare;
+		ret = at91_adc_trigger_init(indio_dev);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "couldn't setup the triggers.\n");
+			goto per_clk_disable_unprepare;
+		}
 	}
 
 	ret = iio_device_register(indio_dev);
 	if (ret < 0)
 		goto per_clk_disable_unprepare;
 
-	dev_info(&pdev->dev, "setting up trigger as %s\n",
-		 st->selected_trig->name);
+	if (st->selected_trig->hw_trig)
+		dev_info(&pdev->dev, "setting up trigger as %s\n",
+			 st->selected_trig->name);
 
 	dev_info(&pdev->dev, "version: %x\n",
 		 readl_relaxed(st->base + AT91_SAMA5D2_VERSION));

drivers/iio/dummy/iio_simple_dummy_events.c

@@ -72,6 +72,7 @@ int iio_simple_dummy_write_event_config(struct iio_dev *indio_dev,
 				st->event_en = state;
 			else
 				return -EINVAL;
+			break;
 		default:
 			return -EINVAL;
 		}

drivers/iio/pressure/zpa2326.c

@@ -865,7 +865,6 @@ complete:
 static int zpa2326_wait_oneshot_completion(const struct iio_dev   *indio_dev,
 					   struct zpa2326_private *private)
 {
-	int          ret;
 	unsigned int val;
 	long     timeout;
 
@@ -887,14 +886,11 @@ static int zpa2326_wait_oneshot_completion(const struct iio_dev   *indio_dev,
 		/* Timed out. */
 		zpa2326_warn(indio_dev, "no one shot interrupt occurred (%ld)",
 			     timeout);
-		ret = -ETIME;
-	} else if (timeout < 0) {
-		zpa2326_warn(indio_dev,
-			     "wait for one shot interrupt cancelled");
-		ret = -ERESTARTSYS;
+		return -ETIME;
 	}
 
-	return ret;
+	zpa2326_warn(indio_dev, "wait for one shot interrupt cancelled");
+	return -ERESTARTSYS;
 }
 
 static int zpa2326_init_managed_irq(struct device          *parent,

drivers/iio/proximity/as3935.c

@@ -39,8 +39,12 @@
 #define AS3935_AFE_GAIN_MAX	0x1F
 #define AS3935_AFE_PWR_BIT	BIT(0)
 
+#define AS3935_NFLWDTH		0x01
+#define AS3935_NFLWDTH_MASK	0x7f
+
 #define AS3935_INT		0x03
 #define AS3935_INT_MASK		0x0f
+#define AS3935_DISTURB_INT	BIT(2)
 #define AS3935_EVENT_INT	BIT(3)
 #define AS3935_NOISE_INT	BIT(0)
 
@@ -48,6 +52,7 @@
 #define AS3935_DATA_MASK	0x3F
 
 #define AS3935_TUNE_CAP		0x08
+#define AS3935_DEFAULTS		0x3C
 #define AS3935_CALIBRATE	0x3D
 
 #define AS3935_READ_DATA	BIT(14)
@@ -62,7 +67,9 @@ struct as3935_state {
 	struct mutex lock;
 	struct delayed_work work;
 
+	unsigned long noise_tripped;
 	u32 tune_cap;
+	u32 nflwdth_reg;
 	u8 buffer[16]; /* 8-bit data + 56-bit padding + 64-bit timestamp */
 	u8 buf[2] ____cacheline_aligned;
 };
@@ -145,12 +152,29 @@ static ssize_t as3935_sensor_sensitivity_store(struct device *dev,
 	return len;
 }
 
+static ssize_t as3935_noise_level_tripped_show(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct as3935_state *st = iio_priv(dev_to_iio_dev(dev));
+	int ret;
+
+	mutex_lock(&st->lock);
+	ret = sprintf(buf, "%d\n", !time_after(jiffies, st->noise_tripped + HZ));
+	mutex_unlock(&st->lock);
+
+	return ret;
+}
+
 static IIO_DEVICE_ATTR(sensor_sensitivity, S_IRUGO | S_IWUSR,
 	as3935_sensor_sensitivity_show, as3935_sensor_sensitivity_store, 0);
 
+static IIO_DEVICE_ATTR(noise_level_tripped, S_IRUGO,
+	as3935_noise_level_tripped_show, NULL, 0);
 
 static struct attribute *as3935_attributes[] = {
 	&iio_dev_attr_sensor_sensitivity.dev_attr.attr,
+	&iio_dev_attr_noise_level_tripped.dev_attr.attr,
 	NULL,
 };
 
@@ -246,7 +270,11 @@ static void as3935_event_work(struct work_struct *work)
 	case AS3935_EVENT_INT:
 		iio_trigger_poll_chained(st->trig);
 		break;
+	case AS3935_DISTURB_INT:
 	case AS3935_NOISE_INT:
+		mutex_lock(&st->lock);
+		st->noise_tripped = jiffies;
+		mutex_unlock(&st->lock);
 		dev_warn(&st->spi->dev, "noise level is too high\n");
 		break;
 	}
@@ -269,15 +297,14 @@ static irqreturn_t as3935_interrupt_handler(int irq, void *private)
 
 static void calibrate_as3935(struct as3935_state *st)
 {
-	/* mask disturber interrupt bit */
-	as3935_write(st, AS3935_INT, BIT(5));
-
+	as3935_write(st, AS3935_DEFAULTS, 0x96);
 	as3935_write(st, AS3935_CALIBRATE, 0x96);
 	as3935_write(st, AS3935_TUNE_CAP,
 		BIT(5) | (st->tune_cap / TUNE_CAP_DIV));
 
 	mdelay(2);
 	as3935_write(st, AS3935_TUNE_CAP, (st->tune_cap / TUNE_CAP_DIV));
+	as3935_write(st, AS3935_NFLWDTH, st->nflwdth_reg);
 }
 
 #ifdef CONFIG_PM_SLEEP
@@ -370,6 +397,15 @@ static int as3935_probe(struct spi_device *spi)
 		return -EINVAL;
 	}
 
+	ret = of_property_read_u32(np,
+			"ams,nflwdth", &st->nflwdth_reg);
+	if (!ret && st->nflwdth_reg > AS3935_NFLWDTH_MASK) {
+		dev_err(&spi->dev,
+			"invalid nflwdth setting of %d\n",
+			st->nflwdth_reg);
+		return -EINVAL;
+	}
+
 	indio_dev->dev.parent = &spi->dev;
 	indio_dev->name = spi_get_device_id(spi)->name;
 	indio_dev->channels = as3935_channels;
@@ -384,6 +420,7 @@ static int as3935_probe(struct spi_device *spi)
 		return -ENOMEM;
 
 	st->trig = trig;
+	st->noise_tripped = jiffies - HZ;
 	trig->dev.parent = indio_dev->dev.parent;
 	iio_trigger_set_drvdata(trig, indio_dev);
 	trig->ops = &iio_interrupt_trigger_ops;

drivers/input/input.c

@@ -933,58 +933,52 @@ int input_set_keycode(struct input_dev *dev,
 }
 EXPORT_SYMBOL(input_set_keycode);
 
+bool input_match_device_id(const struct input_dev *dev,
+			   const struct input_device_id *id)
+{
+	if (id->flags & INPUT_DEVICE_ID_MATCH_BUS)
+		if (id->bustype != dev->id.bustype)
+			return false;
+
+	if (id->flags & INPUT_DEVICE_ID_MATCH_VENDOR)
+		if (id->vendor != dev->id.vendor)
+			return false;
+
+	if (id->flags & INPUT_DEVICE_ID_MATCH_PRODUCT)
+		if (id->product != dev->id.product)
+			return false;
+
+	if (id->flags & INPUT_DEVICE_ID_MATCH_VERSION)
+		if (id->version != dev->id.version)
+			return false;
+
+	if (!bitmap_subset(id->evbit, dev->evbit, EV_MAX) ||
+	    !bitmap_subset(id->keybit, dev->keybit, KEY_MAX) ||
+	    !bitmap_subset(id->relbit, dev->relbit, REL_MAX) ||
+	    !bitmap_subset(id->absbit, dev->absbit, ABS_MAX) ||
+	    !bitmap_subset(id->mscbit, dev->mscbit, MSC_MAX) ||
+	    !bitmap_subset(id->ledbit, dev->ledbit, LED_MAX) ||
+	    !bitmap_subset(id->sndbit, dev->sndbit, SND_MAX) ||
+	    !bitmap_subset(id->ffbit, dev->ffbit, FF_MAX) ||
+	    !bitmap_subset(id->swbit, dev->swbit, SW_MAX) ||
+	    !bitmap_subset(id->propbit, dev->propbit, INPUT_PROP_MAX)) {
+		return false;
+	}
+
+	return true;
+}
+EXPORT_SYMBOL(input_match_device_id);
+
 static const struct input_device_id *input_match_device(struct input_handler *handler,
 							struct input_dev *dev)
 {
 	const struct input_device_id *id;
 
 	for (id = handler->id_table; id->flags || id->driver_info; id++) {
-
-		if (id->flags & INPUT_DEVICE_ID_MATCH_BUS)
-			if (id->bustype != dev->id.bustype)
-				continue;
-
-		if (id->flags & INPUT_DEVICE_ID_MATCH_VENDOR)
-			if (id->vendor != dev->id.vendor)
-				continue;
-
-		if (id->flags & INPUT_DEVICE_ID_MATCH_PRODUCT)
-			if (id->product != dev->id.product)
-				continue;
-
-		if (id->flags & INPUT_DEVICE_ID_MATCH_VERSION)
-			if (id->version != dev->id.version)
-				continue;
-
-		if (!bitmap_subset(id->evbit, dev->evbit, EV_MAX))
-			continue;
-
-		if (!bitmap_subset(id->keybit, dev->keybit, KEY_MAX))
-			continue;
-
-		if (!bitmap_subset(id->relbit, dev->relbit, REL_MAX))
-			continue;
-
-		if (!bitmap_subset(id->absbit, dev->absbit, ABS_MAX))
-			continue;
-
-		if (!bitmap_subset(id->mscbit, dev->mscbit, MSC_MAX))
-			continue;
-
-		if (!bitmap_subset(id->ledbit, dev->ledbit, LED_MAX))
-			continue;
-
-		if (!bitmap_subset(id->sndbit, dev->sndbit, SND_MAX))
-			continue;
-
-		if (!bitmap_subset(id->ffbit, dev->ffbit, FF_MAX))
-			continue;
-
-		if (!bitmap_subset(id->swbit, dev->swbit, SW_MAX))
-			continue;
-
-		if (!handler->match || handler->match(handler, dev))
+		if (input_match_device_id(dev, id) &&
+		    (!handler->match || handler->match(handler, dev))) {
 			return id;
+		}
 	}
 
 	return NULL;

drivers/input/joydev.c

@@ -747,6 +747,68 @@ static void joydev_cleanup(struct joydev *joydev)
 		input_close_device(handle);
 }
 
+/*
+ * These codes are copied from from hid-ids.h, unfortunately there is no common
+ * usb_ids/bt_ids.h header.
+ */
+#define USB_VENDOR_ID_SONY			0x054c
+#define USB_DEVICE_ID_SONY_PS3_CONTROLLER		0x0268
+#define USB_DEVICE_ID_SONY_PS4_CONTROLLER		0x05c4
+#define USB_DEVICE_ID_SONY_PS4_CONTROLLER_2		0x09cc
+#define USB_DEVICE_ID_SONY_PS4_CONTROLLER_DONGLE	0x0ba0
+
+#define USB_VENDOR_ID_THQ			0x20d6
+#define USB_DEVICE_ID_THQ_PS3_UDRAW			0xcb17
+
+#define ACCEL_DEV(vnd, prd)						\
+	{								\
+		.flags = INPUT_DEVICE_ID_MATCH_VENDOR |			\
+				INPUT_DEVICE_ID_MATCH_PRODUCT |		\
+				INPUT_DEVICE_ID_MATCH_PROPBIT,		\
+		.vendor = (vnd),					\
+		.product = (prd),					\
+		.propbit = { BIT_MASK(INPUT_PROP_ACCELEROMETER) },	\
+	}
+
+static const struct input_device_id joydev_blacklist[] = {
+	/* Avoid touchpads and touchscreens */
+	{
+		.flags = INPUT_DEVICE_ID_MATCH_EVBIT |
+				INPUT_DEVICE_ID_MATCH_KEYBIT,
+		.evbit = { BIT_MASK(EV_KEY) },
+		.keybit = { [BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH) },
+	},
+	/* Avoid tablets, digitisers and similar devices */
+	{
+		.flags = INPUT_DEVICE_ID_MATCH_EVBIT |
+				INPUT_DEVICE_ID_MATCH_KEYBIT,
+		.evbit = { BIT_MASK(EV_KEY) },
+		.keybit = { [BIT_WORD(BTN_DIGI)] = BIT_MASK(BTN_DIGI) },
+	},
+	/* Disable accelerometers on composite devices */
+	ACCEL_DEV(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER),
+	ACCEL_DEV(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER),
+	ACCEL_DEV(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER_2),
+	ACCEL_DEV(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER_DONGLE),
+	ACCEL_DEV(USB_VENDOR_ID_THQ, USB_DEVICE_ID_THQ_PS3_UDRAW),
+	{ /* sentinel */ }
+};
+
+static bool joydev_dev_is_blacklisted(struct input_dev *dev)
+{
+	const struct input_device_id *id;
+
+	for (id = joydev_blacklist; id->flags; id++) {
+		if (input_match_device_id(dev, id)) {
+			dev_dbg(&dev->dev,
+				"joydev: blacklisting '%s'\n", dev->name);
+			return true;
+		}
+	}
+
+	return false;
+}
+
 static bool joydev_dev_is_absolute_mouse(struct input_dev *dev)
 {
 	DECLARE_BITMAP(jd_scratch, KEY_CNT);
@@ -807,12 +869,8 @@ static bool joydev_dev_is_absolute_mouse(struct input_dev *dev)
 
 static bool joydev_match(struct input_handler *handler, struct input_dev *dev)
 {
-	/* Avoid touchpads and touchscreens */
-	if (test_bit(EV_KEY, dev->evbit) && test_bit(BTN_TOUCH, dev->keybit))
-		return false;
-
-	/* Avoid tablets, digitisers and similar devices */
-	if (test_bit(EV_KEY, dev->evbit) && test_bit(BTN_DIGI, dev->keybit))
+	/* Disable blacklisted devices */
+	if (joydev_dev_is_blacklisted(dev))
 		return false;
 
 	/* Avoid absolute mice */

drivers/input/keyboard/tca8418_keypad.c

@@ -234,14 +234,7 @@ static irqreturn_t tca8418_irq_handler(int irq, void *dev_id)
 static int tca8418_configure(struct tca8418_keypad *keypad_data,
 			     u32 rows, u32 cols)
 {
-	int reg, error;
-
-	/* Write config register, if this fails assume device not present */
-	error = tca8418_write_byte(keypad_data, REG_CFG,
-				CFG_INT_CFG | CFG_OVR_FLOW_IEN | CFG_KE_IEN);
-	if (error < 0)
-		return -ENODEV;
-
+	int reg, error = 0;
 
 	/* Assemble a mask for row and column registers */
 	reg  =  ~(~0 << rows);
@@ -257,6 +250,12 @@ static int tca8418_configure(struct tca8418_keypad *keypad_data,
 	error |= tca8418_write_byte(keypad_data, REG_DEBOUNCE_DIS2, reg >> 8);
 	error |= tca8418_write_byte(keypad_data, REG_DEBOUNCE_DIS3, reg >> 16);
 
+	if (error)
+		return error;
+
+	error = tca8418_write_byte(keypad_data, REG_CFG,
+				CFG_INT_CFG | CFG_OVR_FLOW_IEN | CFG_KE_IEN);
+
 	return error;
 }
 
@@ -268,6 +267,7 @@ static int tca8418_keypad_probe(struct i2c_client *client,
 	struct input_dev *input;
 	u32 rows = 0, cols = 0;
 	int error, row_shift, max_keys;
+	u8 reg;
 
 	/* Check i2c driver capabilities */
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE)) {
@@ -301,10 +301,10 @@ static int tca8418_keypad_probe(struct i2c_client *client,
 	keypad_data->client = client;
 	keypad_data->row_shift = row_shift;
 
-	/* Initialize the chip or fail if chip isn't present */
-	error = tca8418_configure(keypad_data, rows, cols);
-	if (error < 0)
-		return error;
+	/* Read key lock register, if this fails assume device not present */
+	error = tca8418_read_byte(keypad_data, REG_KEY_LCK_EC, &reg);
+	if (error)
+		return -ENODEV;
 
 	/* Configure input device */
 	input = devm_input_allocate_device(dev);
@@ -340,6 +340,11 @@ static int tca8418_keypad_probe(struct i2c_client *client,
 		return error;
 	}
 
+	/* Initialize the chip */
+	error = tca8418_configure(keypad_data, rows, cols);
+	if (error < 0)
+		return error;
+
 	error = input_register_device(input);
 	if (error) {
 		dev_err(dev, "Unable to register input device, error: %d\n",

drivers/input/misc/axp20x-pek.c

@@ -403,6 +403,7 @@ static const struct platform_device_id axp_pek_id_match[] = {
 	},
 	{ /* sentinel */ }
 };
+MODULE_DEVICE_TABLE(platform, axp_pek_id_match);
 
 static struct platform_driver axp20x_pek_driver = {
 	.probe		= axp20x_pek_probe,
@@ -417,4 +418,3 @@ module_platform_driver(axp20x_pek_driver);
 MODULE_DESCRIPTION("axp20x Power Button");
 MODULE_AUTHOR("Carlo Caione <carlo@caione.org>");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:axp20x-pek");

drivers/input/misc/ims-pcu.c

@@ -1635,13 +1635,25 @@ ims_pcu_get_cdc_union_desc(struct usb_interface *intf)
 		return NULL;
 	}
 
-	while (buflen > 0) {
+	while (buflen >= sizeof(*union_desc)) {
 		union_desc = (struct usb_cdc_union_desc *)buf;
 
+		if (union_desc->bLength > buflen) {
+			dev_err(&intf->dev, "Too large descriptor\n");
+			return NULL;
+		}
+
 		if (union_desc->bDescriptorType == USB_DT_CS_INTERFACE &&
 		    union_desc->bDescriptorSubType == USB_CDC_UNION_TYPE) {
 			dev_dbg(&intf->dev, "Found union header\n");
-			return union_desc;
+
+			if (union_desc->bLength >= sizeof(*union_desc))
+				return union_desc;
+
+			dev_err(&intf->dev,
+				"Union descriptor to short (%d vs %zd\n)",
+				union_desc->bLength, sizeof(*union_desc));
+			return NULL;
 		}
 
 		buflen -= union_desc->bLength;

drivers/input/mouse/synaptics.c

@@ -1709,8 +1709,7 @@ static int synaptics_create_intertouch(struct psmouse *psmouse,
 		.sensor_pdata = {
 			.sensor_type = rmi_sensor_touchpad,
 			.axis_align.flip_y = true,
-			/* to prevent cursors jumps: */
-			.kernel_tracking = true,
+			.kernel_tracking = false,
 			.topbuttonpad = topbuttonpad,
 		},
 		.f30_data = {

drivers/input/touchscreen/goodix.c

@@ -72,6 +72,9 @@ struct goodix_ts_data {
 #define GOODIX_REG_CONFIG_DATA		0x8047
 #define GOODIX_REG_ID			0x8140
 
+#define GOODIX_BUFFER_STATUS_READY	BIT(7)
+#define GOODIX_BUFFER_STATUS_TIMEOUT	20
+
 #define RESOLUTION_LOC		1
 #define MAX_CONTACTS_LOC	5
 #define TRIGGER_LOC		6
@@ -195,35 +198,53 @@ static int goodix_get_cfg_len(u16 id)
 
 static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data)
 {
+	unsigned long max_timeout;
 	int touch_num;
 	int error;
 
-	error = goodix_i2c_read(ts->client, GOODIX_READ_COOR_ADDR, data,
-				GOODIX_CONTACT_SIZE + 1);
-	if (error) {
-		dev_err(&ts->client->dev, "I2C transfer error: %d\n", error);
-		return error;
-	}
+	/*
+	 * The 'buffer status' bit, which indicates that the data is valid, is
+	 * not set as soon as the interrupt is raised, but slightly after.
+	 * This takes around 10 ms to happen, so we poll for 20 ms.
+	 */
+	max_timeout = jiffies + msecs_to_jiffies(GOODIX_BUFFER_STATUS_TIMEOUT);
+	do {
+		error = goodix_i2c_read(ts->client, GOODIX_READ_COOR_ADDR,
+					data, GOODIX_CONTACT_SIZE + 1);
+		if (error) {
+			dev_err(&ts->client->dev, "I2C transfer error: %d\n",
+					error);
+			return error;
+		}
 
-	if (!(data[0] & 0x80))
-		return -EAGAIN;
+		if (data[0] & GOODIX_BUFFER_STATUS_READY) {
+			touch_num = data[0] & 0x0f;
+			if (touch_num > ts->max_touch_num)
+				return -EPROTO;
+
+			if (touch_num > 1) {
+				data += 1 + GOODIX_CONTACT_SIZE;
+				error = goodix_i2c_read(ts->client,
+						GOODIX_READ_COOR_ADDR +
+							1 + GOODIX_CONTACT_SIZE,
+						data,
+						GOODIX_CONTACT_SIZE *
+							(touch_num - 1));
+				if (error)
+					return error;
+			}
+
+			return touch_num;
+		}
 
-	touch_num = data[0] & 0x0f;
-	if (touch_num > ts->max_touch_num)
-		return -EPROTO;
-
-	if (touch_num > 1) {
-		data += 1 + GOODIX_CONTACT_SIZE;
-		error = goodix_i2c_read(ts->client,
-					GOODIX_READ_COOR_ADDR +
-						1 + GOODIX_CONTACT_SIZE,
-					data,
-					GOODIX_CONTACT_SIZE * (touch_num - 1));
-		if (error)
-			return error;
-	}
+		usleep_range(1000, 2000); /* Poll every 1 - 2 ms */
+	} while (time_before(jiffies, max_timeout));
 
-	return touch_num;
+	/*
+	 * The Goodix panel will send spurious interrupts after a
+	 * 'finger up' event, which will always cause a timeout.
+	 */
+	return 0;
 }
 
 static void goodix_ts_report_touch(struct goodix_ts_data *ts, u8 *coor_data)

drivers/input/touchscreen/stmfts.c

@@ -663,12 +663,10 @@ static int stmfts_probe(struct i2c_client *client,
 	sdata->input->open = stmfts_input_open;
 	sdata->input->close = stmfts_input_close;
 
+	input_set_capability(sdata->input, EV_ABS, ABS_MT_POSITION_X);
+	input_set_capability(sdata->input, EV_ABS, ABS_MT_POSITION_Y);
 	touchscreen_parse_properties(sdata->input, true, &sdata->prop);
 
-	input_set_abs_params(sdata->input, ABS_MT_POSITION_X, 0,
-						sdata->prop.max_x, 0, 0);
-	input_set_abs_params(sdata->input, ABS_MT_POSITION_Y, 0,
-						sdata->prop.max_y, 0, 0);
 	input_set_abs_params(sdata->input, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
 	input_set_abs_params(sdata->input, ABS_MT_TOUCH_MINOR, 0, 255, 0, 0);
 	input_set_abs_params(sdata->input, ABS_MT_ORIENTATION, 0, 255, 0, 0);

drivers/input/touchscreen/ti_am335x_tsc.c

@@ -161,7 +161,7 @@ static void titsc_step_config(struct titsc *ts_dev)
 		break;
 	case 5:
 		config |= ts_dev->bit_xp | STEPCONFIG_INP_AN4 |
-				ts_dev->bit_xn | ts_dev->bit_yp;
+				STEPCONFIG_XNP | STEPCONFIG_YPN;
 		break;
 	case 8:
 		config |= ts_dev->bit_yp | STEPCONFIG_INP(ts_dev->inp_xp);

drivers/irqchip/irq-gic-v3-its.c

@@ -107,6 +107,10 @@ struct its_node {
 
 #define ITS_ITT_ALIGN		SZ_256
 
+/* The maximum number of VPEID bits supported by VLPI commands */
+#define ITS_MAX_VPEID_BITS	(16)
+#define ITS_MAX_VPEID		(1 << (ITS_MAX_VPEID_BITS))
+
 /* Convert page order to size in bytes */
 #define PAGE_ORDER_TO_SIZE(o)	(PAGE_SIZE << (o))
 
@@ -308,7 +312,7 @@ static void its_encode_size(struct its_cmd_block *cmd, u8 size)
 
 static void its_encode_itt(struct its_cmd_block *cmd, u64 itt_addr)
 {
-	its_mask_encode(&cmd->raw_cmd[2], itt_addr >> 8, 50, 8);
+	its_mask_encode(&cmd->raw_cmd[2], itt_addr >> 8, 51, 8);
 }
 
 static void its_encode_valid(struct its_cmd_block *cmd, int valid)
@@ -318,7 +322,7 @@ static void its_encode_valid(struct its_cmd_block *cmd, int valid)
 
 static void its_encode_target(struct its_cmd_block *cmd, u64 target_addr)
 {
-	its_mask_encode(&cmd->raw_cmd[2], target_addr >> 16, 50, 16);
+	its_mask_encode(&cmd->raw_cmd[2], target_addr >> 16, 51, 16);
 }
 
 static void its_encode_collection(struct its_cmd_block *cmd, u16 col)
@@ -358,7 +362,7 @@ static void its_encode_its_list(struct its_cmd_block *cmd, u16 its_list)
 
 static void its_encode_vpt_addr(struct its_cmd_block *cmd, u64 vpt_pa)
 {
-	its_mask_encode(&cmd->raw_cmd[3], vpt_pa >> 16, 50, 16);
+	its_mask_encode(&cmd->raw_cmd[3], vpt_pa >> 16, 51, 16);
 }
 
 static void its_encode_vpt_size(struct its_cmd_block *cmd, u8 vpt_size)
@@ -1478,9 +1482,9 @@ static int its_setup_baser(struct its_node *its, struct its_baser *baser,
 	u64 val = its_read_baser(its, baser);
 	u64 esz = GITS_BASER_ENTRY_SIZE(val);
 	u64 type = GITS_BASER_TYPE(val);
+	u64 baser_phys, tmp;
 	u32 alloc_pages;
 	void *base;
-	u64 tmp;
 
 retry_alloc_baser:
 	alloc_pages = (PAGE_ORDER_TO_SIZE(order) / psz);
@@ -1496,8 +1500,24 @@ retry_alloc_baser:
 	if (!base)
 		return -ENOMEM;
 
+	baser_phys = virt_to_phys(base);
+
+	/* Check if the physical address of the memory is above 48bits */
+	if (IS_ENABLED(CONFIG_ARM64_64K_PAGES) && (baser_phys >> 48)) {
+
+		/* 52bit PA is supported only when PageSize=64K */
+		if (psz != SZ_64K) {
+			pr_err("ITS: no 52bit PA support when psz=%d\n", psz);
+			free_pages((unsigned long)base, order);
+			return -ENXIO;
+		}
+
+		/* Convert 52bit PA to 48bit field */
+		baser_phys = GITS_BASER_PHYS_52_to_48(baser_phys);
+	}
+
 retry_baser:
-	val = (virt_to_phys(base)				 |
+	val = (baser_phys					 |
 		(type << GITS_BASER_TYPE_SHIFT)			 |
 		((esz - 1) << GITS_BASER_ENTRY_SIZE_SHIFT)	 |
 		((alloc_pages - 1) << GITS_BASER_PAGES_SHIFT)	 |
@@ -1582,13 +1602,12 @@ retry_baser:
 
 static bool its_parse_indirect_baser(struct its_node *its,
 				     struct its_baser *baser,
-				     u32 psz, u32 *order)
+				     u32 psz, u32 *order, u32 ids)
 {
 	u64 tmp = its_read_baser(its, baser);
 	u64 type = GITS_BASER_TYPE(tmp);
 	u64 esz = GITS_BASER_ENTRY_SIZE(tmp);
 	u64 val = GITS_BASER_InnerShareable | GITS_BASER_RaWaWb;
-	u32 ids = its->device_ids;
 	u32 new_order = *order;
 	bool indirect = false;
 
@@ -1680,9 +1699,13 @@ static int its_alloc_tables(struct its_node *its)
 			continue;
 
 		case GITS_BASER_TYPE_DEVICE:
+			indirect = its_parse_indirect_baser(its, baser,
+							    psz, &order,
+							    its->device_ids);
 		case GITS_BASER_TYPE_VCPU:
 			indirect = its_parse_indirect_baser(its, baser,
-							    psz, &order);
+							    psz, &order,
+							    ITS_MAX_VPEID_BITS);
 			break;
 		}
 
@@ -2551,7 +2574,7 @@ static struct irq_chip its_vpe_irq_chip = {
 
 static int its_vpe_id_alloc(void)
 {
-	return ida_simple_get(&its_vpeid_ida, 0, 1 << 16, GFP_KERNEL);
+	return ida_simple_get(&its_vpeid_ida, 0, ITS_MAX_VPEID, GFP_KERNEL);
 }
 
 static void its_vpe_id_free(u16 id)
@@ -2851,7 +2874,7 @@ static int its_init_vpe_domain(void)
 		return -ENOMEM;
 	}
 
-	BUG_ON(entries != vpe_proxy.dev->nr_ites);
+	BUG_ON(entries > vpe_proxy.dev->nr_ites);
 
 	raw_spin_lock_init(&vpe_proxy.lock);
 	vpe_proxy.next_victim = 0;

drivers/irqchip/irq-tango.c

@@ -141,7 +141,7 @@ static void __init tangox_irq_init_chip(struct irq_chip_generic *gc,
 	for (i = 0; i < 2; i++) {
 		ct[i].chip.irq_ack = irq_gc_ack_set_bit;
 		ct[i].chip.irq_mask = irq_gc_mask_disable_reg;
-		ct[i].chip.irq_mask_ack = irq_gc_mask_disable_reg_and_ack;
+		ct[i].chip.irq_mask_ack = irq_gc_mask_disable_and_ack_set;
 		ct[i].chip.irq_unmask = irq_gc_unmask_enable_reg;
 		ct[i].chip.irq_set_type = tangox_irq_set_type;
 		ct[i].chip.name = gc->domain->name;

drivers/media/cec/cec-adap.c

@@ -1797,12 +1797,19 @@ static int cec_receive_notify(struct cec_adapter *adap, struct cec_msg *msg,
 	 */
 	switch (msg->msg[1]) {
 	case CEC_MSG_GET_CEC_VERSION:
-	case CEC_MSG_GIVE_DEVICE_VENDOR_ID:
 	case CEC_MSG_ABORT:
 	case CEC_MSG_GIVE_DEVICE_POWER_STATUS:
-	case CEC_MSG_GIVE_PHYSICAL_ADDR:
 	case CEC_MSG_GIVE_OSD_NAME:
+		/*
+		 * These messages reply with a directed message, so ignore if
+		 * the initiator is Unregistered.
+		 */
+		if (!adap->passthrough && from_unregistered)
+			return 0;
+		/* Fall through */
+	case CEC_MSG_GIVE_DEVICE_VENDOR_ID:
 	case CEC_MSG_GIVE_FEATURES:
+	case CEC_MSG_GIVE_PHYSICAL_ADDR:
 		/*
 		 * Skip processing these messages if the passthrough mode
 		 * is on.
@@ -1810,7 +1817,7 @@ static int cec_receive_notify(struct cec_adapter *adap, struct cec_msg *msg,
 		if (adap->passthrough)
 			goto skip_processing;
 		/* Ignore if addressing is wrong */
-		if (is_broadcast || from_unregistered)
+		if (is_broadcast)
 			return 0;
 		break;
 

drivers/media/dvb-core/dvb_frontend.c

@@ -141,22 +141,39 @@ struct dvb_frontend_private {
 static void dvb_frontend_invoke_release(struct dvb_frontend *fe,
 					void (*release)(struct dvb_frontend *fe));
 
-static void dvb_frontend_free(struct kref *ref)
+static void __dvb_frontend_free(struct dvb_frontend *fe)
 {
-	struct dvb_frontend *fe =
-		container_of(ref, struct dvb_frontend, refcount);
 	struct dvb_frontend_private *fepriv = fe->frontend_priv;
 
+	if (!fepriv)
+		return;
+
 	dvb_free_device(fepriv->dvbdev);
 
 	dvb_frontend_invoke_release(fe, fe->ops.release);
 
 	kfree(fepriv);
+	fe->frontend_priv = NULL;
+}
+
+static void dvb_frontend_free(struct kref *ref)
+{
+	struct dvb_frontend *fe =
+		container_of(ref, struct dvb_frontend, refcount);
+
+	__dvb_frontend_free(fe);
 }
 
 static void dvb_frontend_put(struct dvb_frontend *fe)
 {
-	kref_put(&fe->refcount, dvb_frontend_free);
+	/*
+	 * Check if the frontend was registered, as otherwise
+	 * kref was not initialized yet.
+	 */
+	if (fe->frontend_priv)
+		kref_put(&fe->refcount, dvb_frontend_free);
+	else
+		__dvb_frontend_free(fe);
 }
 
 static void dvb_frontend_get(struct dvb_frontend *fe)

drivers/media/dvb-frontends/dib3000mc.c

@@ -55,29 +55,57 @@ struct dib3000mc_state {
 
 static u16 dib3000mc_read_word(struct dib3000mc_state *state, u16 reg)
 {
-	u8 wb[2] = { (reg >> 8) | 0x80, reg & 0xff };
-	u8 rb[2];
 	struct i2c_msg msg[2] = {
-		{ .addr = state->i2c_addr >> 1, .flags = 0,        .buf = wb, .len = 2 },
-		{ .addr = state->i2c_addr >> 1, .flags = I2C_M_RD, .buf = rb, .len = 2 },
+		{ .addr = state->i2c_addr >> 1, .flags = 0,        .len = 2 },
+		{ .addr = state->i2c_addr >> 1, .flags = I2C_M_RD, .len = 2 },
 	};
+	u16 word;
+	u8 *b;
+
+	b = kmalloc(4, GFP_KERNEL);
+	if (!b)
+		return 0;
+
+	b[0] = (reg >> 8) | 0x80;
+	b[1] = reg;
+	b[2] = 0;
+	b[3] = 0;
+
+	msg[0].buf = b;
+	msg[1].buf = b + 2;
 
 	if (i2c_transfer(state->i2c_adap, msg, 2) != 2)
 		dprintk("i2c read error on %d\n",reg);
 
-	return (rb[0] << 8) | rb[1];
+	word = (b[2] << 8) | b[3];
+	kfree(b);
+
+	return word;
 }
 
 static int dib3000mc_write_word(struct dib3000mc_state *state, u16 reg, u16 val)
 {
-	u8 b[4] = {
-		(reg >> 8) & 0xff, reg & 0xff,
-		(val >> 8) & 0xff, val & 0xff,
-	};
 	struct i2c_msg msg = {
-		.addr = state->i2c_addr >> 1, .flags = 0, .buf = b, .len = 4
+		.addr = state->i2c_addr >> 1, .flags = 0, .len = 4
 	};
-	return i2c_transfer(state->i2c_adap, &msg, 1) != 1 ? -EREMOTEIO : 0;
+	int rc;
+	u8 *b;
+
+	b = kmalloc(4, GFP_KERNEL);
+	if (!b)
+		return -ENOMEM;
+
+	b[0] = reg >> 8;
+	b[1] = reg;
+	b[2] = val >> 8;
+	b[3] = val;
+
+	msg.buf = b;
+
+	rc = i2c_transfer(state->i2c_adap, &msg, 1) != 1 ? -EREMOTEIO : 0;
+	kfree(b);
+
+	return rc;
 }
 
 static int dib3000mc_identify(struct dib3000mc_state *state)

drivers/media/dvb-frontends/dvb-pll.c

@@ -753,13 +753,19 @@ struct dvb_frontend *dvb_pll_attach(struct dvb_frontend *fe, int pll_addr,
 				    struct i2c_adapter *i2c,
 				    unsigned int pll_desc_id)
 {
-	u8 b1 [] = { 0 };
-	struct i2c_msg msg = { .addr = pll_addr, .flags = I2C_M_RD,
-			       .buf = b1, .len = 1 };
+	u8 *b1;
+	struct i2c_msg msg = { .addr = pll_addr, .flags = I2C_M_RD, .len = 1 };
 	struct dvb_pll_priv *priv = NULL;
 	int ret;
 	const struct dvb_pll_desc *desc;
 
+	b1 = kmalloc(1, GFP_KERNEL);
+	if (!b1)
+		return NULL;
+
+	b1[0] = 0;
+	msg.buf = b1;
+
 	if ((id[dvb_pll_devcount] > DVB_PLL_UNDEFINED) &&
 	    (id[dvb_pll_devcount] < ARRAY_SIZE(pll_list)))
 		pll_desc_id = id[dvb_pll_devcount];
@@ -773,15 +779,19 @@ struct dvb_frontend *dvb_pll_attach(struct dvb_frontend *fe, int pll_addr,
 			fe->ops.i2c_gate_ctrl(fe, 1);
 
 		ret = i2c_transfer (i2c, &msg, 1);
-		if (ret != 1)
+		if (ret != 1) {
+			kfree(b1);
 			return NULL;
+		}
 		if (fe->ops.i2c_gate_ctrl)
 			     fe->ops.i2c_gate_ctrl(fe, 0);
 	}
 
 	priv = kzalloc(sizeof(struct dvb_pll_priv), GFP_KERNEL);
-	if (priv == NULL)
+	if (!priv) {
+		kfree(b1);
 		return NULL;
+	}
 
 	priv->pll_i2c_address = pll_addr;
 	priv->i2c = i2c;
@@ -811,6 +821,8 @@ struct dvb_frontend *dvb_pll_attach(struct dvb_frontend *fe, int pll_addr,
 				"insmod option" : "autodetected");
 	}
 
+	kfree(b1);
+
 	return fe;
 }
 EXPORT_SYMBOL(dvb_pll_attach);

drivers/media/platform/Kconfig

@@ -112,7 +112,7 @@ config VIDEO_PXA27x
 
 config VIDEO_QCOM_CAMSS
 	tristate "Qualcomm 8x16 V4L2 Camera Subsystem driver"
-	depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && HAS_DMA
 	depends on (ARCH_QCOM && IOMMU_DMA) || COMPILE_TEST
 	select VIDEOBUF2_DMA_SG
 	select V4L2_FWNODE

drivers/media/platform/qcom/camss-8x16/camss-vfe.c

@@ -2660,7 +2660,7 @@ static int vfe_get_selection(struct v4l2_subdev *sd,
  *
  * Return -EINVAL or zero on success
  */
-int vfe_set_selection(struct v4l2_subdev *sd,
+static int vfe_set_selection(struct v4l2_subdev *sd,
 			     struct v4l2_subdev_pad_config *cfg,
 			     struct v4l2_subdev_selection *sel)
 {

drivers/media/platform/qcom/venus/helpers.c

@@ -682,6 +682,7 @@ void venus_helper_vb2_stop_streaming(struct vb2_queue *q)
 			hfi_session_abort(inst);
 
 		load_scale_clocks(core);
+		INIT_LIST_HEAD(&inst->registeredbufs);
 	}
 
 	venus_helper_buffers_done(inst, VB2_BUF_STATE_ERROR);

drivers/media/platform/s5p-cec/exynos_hdmi_cecctrl.c

@@ -172,7 +172,8 @@ u32 s5p_cec_get_status(struct s5p_cec_dev *cec)
 {
 	u32 status = 0;
 
-	status = readb(cec->reg + S5P_CEC_STATUS_0);
+	status = readb(cec->reg + S5P_CEC_STATUS_0) & 0xf;
+	status |= (readb(cec->reg + S5P_CEC_TX_STAT1) & 0xf) << 4;
 	status |= readb(cec->reg + S5P_CEC_STATUS_1) << 8;
 	status |= readb(cec->reg + S5P_CEC_STATUS_2) << 16;
 	status |= readb(cec->reg + S5P_CEC_STATUS_3) << 24;

drivers/media/platform/s5p-cec/s5p_cec.c

@@ -92,7 +92,10 @@ static irqreturn_t s5p_cec_irq_handler(int irq, void *priv)
 	dev_dbg(cec->dev, "irq received\n");
 
 	if (status & CEC_STATUS_TX_DONE) {
-		if (status & CEC_STATUS_TX_ERROR) {
+		if (status & CEC_STATUS_TX_NACK) {
+			dev_dbg(cec->dev, "CEC_STATUS_TX_NACK set\n");
+			cec->tx = STATE_NACK;
+		} else if (status & CEC_STATUS_TX_ERROR) {
 			dev_dbg(cec->dev, "CEC_STATUS_TX_ERROR set\n");
 			cec->tx = STATE_ERROR;
 		} else {
@@ -135,6 +138,12 @@ static irqreturn_t s5p_cec_irq_handler_thread(int irq, void *priv)
 		cec_transmit_done(cec->adap, CEC_TX_STATUS_OK, 0, 0, 0, 0);
 		cec->tx = STATE_IDLE;
 		break;
+	case STATE_NACK:
+		cec_transmit_done(cec->adap,
+			CEC_TX_STATUS_MAX_RETRIES | CEC_TX_STATUS_NACK,
+			0, 1, 0, 0);
+		cec->tx = STATE_IDLE;
+		break;
 	case STATE_ERROR:
 		cec_transmit_done(cec->adap,
 			CEC_TX_STATUS_MAX_RETRIES | CEC_TX_STATUS_ERROR,