Merge tag 'imx-soc' of git://git.pengutronix.de/git/imx/linux-2.6 into next/soc

From Sascha Hauer <s.hauer@pengutronix.de>:
ARM i.MX SoC updates for 3.6

* tag 'imx-soc' of git://git.pengutronix.de/git/imx/linux-2.6:
  ARM: imx: fix mx51 ehci setup errors
  ARM: imx: make ehci power/oc polarities configurable
  ARM: imx: add rtc support to mx35_3ds
  ARM: imx: enable support for mx35 rtc
  ARM: imx: fix i.MX35 CPU architecture
  ARM: i.MX51 iomux: added missing pin definitions

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/mach-imx/Kconfig

@@ -73,7 +73,7 @@ config SOC_IMX31
 
 config SOC_IMX35
 	bool
-	select CPU_V6
+	select CPU_V6K
 	select ARCH_MXC_IOMUX_V3
 	select COMMON_CLK
 	select HAVE_EPIT
@@ -589,6 +589,7 @@ config MACH_MX35_3DS
 	select IMX_HAVE_PLATFORM_IPU_CORE
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_MXC_RTC
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	help
 	  Include support for MX35PDK platform. This includes specific

arch/arm/mach-imx/devices-imx35.h

@@ -68,6 +68,10 @@ extern const struct imx_mxc_nand_data imx35_mxc_nand_data;
 #define imx35_add_mxc_nand(pdata)	\
 	imx_add_mxc_nand(&imx35_mxc_nand_data, pdata)
 
+extern const struct imx_mxc_rtc_data imx35_mxc_rtc_data;
+#define imx35_add_mxc_rtc()	\
+	imx_add_mxc_rtc(&imx35_mxc_rtc_data)
+
 extern const struct imx_mxc_w1_data imx35_mxc_w1_data;
 #define imx35_add_mxc_w1(pdata)	\
 	imx_add_mxc_w1(&imx35_mxc_w1_data)

arch/arm/mach-imx/ehci-imx25.c

@@ -24,14 +24,18 @@
 #define MX25_OTG_SIC_SHIFT	29
 #define MX25_OTG_SIC_MASK	(0x3 << MX25_OTG_SIC_SHIFT)
 #define MX25_OTG_PM_BIT		(1 << 24)
+#define MX25_OTG_PP_BIT		(1 << 11)
+#define MX25_OTG_OCPOL_BIT	(1 << 3)
 
 #define MX25_H1_SIC_SHIFT	21
 #define MX25_H1_SIC_MASK	(0x3 << MX25_H1_SIC_SHIFT)
+#define MX25_H1_PP_BIT		(1 << 18)
 #define MX25_H1_PM_BIT		(1 << 8)
 #define MX25_H1_IPPUE_UP_BIT	(1 << 7)
 #define MX25_H1_IPPUE_DOWN_BIT	(1 << 6)
 #define MX25_H1_TLL_BIT		(1 << 5)
 #define MX25_H1_USBTE_BIT	(1 << 4)
+#define MX25_H1_OCPOL_BIT	(1 << 2)
 
 int mx25_initialize_usb_hw(int port, unsigned int flags)
 {
@@ -41,21 +45,35 @@ int mx25_initialize_usb_hw(int port, unsigned int flags)
 
 	switch (port) {
 	case 0:	/* OTG port */
-		v &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PM_BIT);
+		v &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PM_BIT | MX25_OTG_PP_BIT |
+			MX25_OTG_OCPOL_BIT);
 		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_OTG_SIC_SHIFT;
 
 		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
 			v |= MX25_OTG_PM_BIT;
 
+		if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
+			v |= MX25_OTG_PP_BIT;
+
+		if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
+			v |= MX25_OTG_OCPOL_BIT;
+
 		break;
 	case 1: /* H1 port */
-		v &= ~(MX25_H1_SIC_MASK | MX25_H1_PM_BIT | MX25_H1_TLL_BIT |
-			MX25_H1_USBTE_BIT | MX25_H1_IPPUE_DOWN_BIT | MX25_H1_IPPUE_UP_BIT);
+		v &= ~(MX25_H1_SIC_MASK | MX25_H1_PM_BIT | MX25_H1_PP_BIT |
+			MX25_H1_OCPOL_BIT | MX25_H1_TLL_BIT | MX25_H1_USBTE_BIT |
+			MX25_H1_IPPUE_DOWN_BIT | MX25_H1_IPPUE_UP_BIT);
 		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_H1_SIC_SHIFT;
 
 		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
 			v |= MX25_H1_PM_BIT;
 
+		if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
+			v |= MX25_H1_PP_BIT;
+
+		if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
+			v |= MX25_H1_OCPOL_BIT;
+
 		if (!(flags & MXC_EHCI_TTL_ENABLED))
 			v |= MX25_H1_TLL_BIT;
 

arch/arm/mach-imx/ehci-imx35.c

@@ -24,14 +24,18 @@
 #define MX35_OTG_SIC_SHIFT	29
 #define MX35_OTG_SIC_MASK	(0x3 << MX35_OTG_SIC_SHIFT)
 #define MX35_OTG_PM_BIT		(1 << 24)
+#define MX35_OTG_PP_BIT		(1 << 11)
+#define MX35_OTG_OCPOL_BIT	(1 << 3)
 
 #define MX35_H1_SIC_SHIFT	21
 #define MX35_H1_SIC_MASK	(0x3 << MX35_H1_SIC_SHIFT)
+#define MX35_H1_PP_BIT		(1 << 18)
 #define MX35_H1_PM_BIT		(1 << 8)
 #define MX35_H1_IPPUE_UP_BIT	(1 << 7)
 #define MX35_H1_IPPUE_DOWN_BIT	(1 << 6)
 #define MX35_H1_TLL_BIT		(1 << 5)
 #define MX35_H1_USBTE_BIT	(1 << 4)
+#define MX35_H1_OCPOL_BIT	(1 << 2)
 
 int mx35_initialize_usb_hw(int port, unsigned int flags)
 {
@@ -41,21 +45,35 @@ int mx35_initialize_usb_hw(int port, unsigned int flags)
 
 	switch (port) {
 	case 0:	/* OTG port */
-		v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT);
+		v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT | MX35_OTG_PP_BIT |
+			MX35_OTG_OCPOL_BIT);
 		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_OTG_SIC_SHIFT;
 
 		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
 			v |= MX35_OTG_PM_BIT;
 
+		if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
+			v |= MX35_OTG_PP_BIT;
+
+		if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
+			v |= MX35_OTG_OCPOL_BIT;
+
 		break;
 	case 1: /* H1 port */
-		v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_TLL_BIT |
-			MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT);
+		v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_PP_BIT |
+			MX35_H1_OCPOL_BIT | MX35_H1_TLL_BIT | MX35_H1_USBTE_BIT |
+			MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT);
 		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_H1_SIC_SHIFT;
 
 		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
 			v |= MX35_H1_PM_BIT;
 
+		if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
+			v |= MX35_H1_PP_BIT;
+
+		if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
+			v |= MX35_H1_OCPOL_BIT;
+
 		if (!(flags & MXC_EHCI_TTL_ENABLED))
 			v |= MX35_H1_TLL_BIT;
 

arch/arm/mach-imx/ehci-imx5.c

@@ -28,11 +28,14 @@
 #define MXC_OTG_UCTRL_OPM_BIT		(1 << 24)	/* OTG power mask */
 #define MXC_H1_UCTRL_H1UIE_BIT		(1 << 12)	/* Host1 ULPI interrupt enable */
 #define MXC_H1_UCTRL_H1WIE_BIT		(1 << 11)	/* HOST1 wakeup intr enable */
-#define MXC_H1_UCTRL_H1PM_BIT		(1 <<  8)		/* HOST1 power mask */
+#define MXC_H1_UCTRL_H1PM_BIT		(1 <<  8)	/* HOST1 power mask */
 
 /* USB_PHY_CTRL_FUNC */
+#define MXC_OTG_PHYCTRL_OC_POL_BIT	(1 << 9)	/* OTG Polarity of Overcurrent */
 #define MXC_OTG_PHYCTRL_OC_DIS_BIT	(1 << 8)	/* OTG Disable Overcurrent Event */
+#define MXC_H1_OC_POL_BIT		(1 << 6)	/* UH1 Polarity of Overcurrent */
 #define MXC_H1_OC_DIS_BIT		(1 << 5)	/* UH1 Disable Overcurrent Event */
+#define MXC_OTG_PHYCTRL_PWR_POL_BIT	(1 << 3)	/* OTG Power Pin Polarity */
 
 /* USBH2CTRL */
 #define MXC_H2_UCTRL_H2UIE_BIT		(1 << 8)
@@ -80,13 +83,21 @@ int mx51_initialize_usb_hw(int port, unsigned int flags)
 		if (flags & MXC_EHCI_INTERNAL_PHY) {
 			v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
 
+			if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)
+				v |= MXC_OTG_PHYCTRL_OC_POL_BIT;
+			else
+				v &= ~MXC_OTG_PHYCTRL_OC_POL_BIT;
 			if (flags & MXC_EHCI_POWER_PINS_ENABLED) {
-				/* OC/USBPWR is not used */
-				v |= MXC_OTG_PHYCTRL_OC_DIS_BIT;
-			} else {
 				/* OC/USBPWR is used */
 				v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT;
+			} else {
+				/* OC/USBPWR is not used */
+				v |= MXC_OTG_PHYCTRL_OC_DIS_BIT;
 			}
+			if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
+				v |= MXC_OTG_PHYCTRL_PWR_POL_BIT;
+			else
+				v &= ~MXC_OTG_PHYCTRL_PWR_POL_BIT;
 			__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
 
 			v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
@@ -95,9 +106,9 @@ int mx51_initialize_usb_hw(int port, unsigned int flags)
 			else
 				v &= ~MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup disable */
 			if (flags & MXC_EHCI_POWER_PINS_ENABLED)
-				v |= MXC_OTG_UCTRL_OPM_BIT;
-			else
 				v &= ~MXC_OTG_UCTRL_OPM_BIT;
+			else
+				v |= MXC_OTG_UCTRL_OPM_BIT;
 			__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
 		}
 		break;
@@ -113,12 +124,16 @@ int mx51_initialize_usb_hw(int port, unsigned int flags)
 		}
 
 		if (flags & MXC_EHCI_POWER_PINS_ENABLED)
-			v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/
+			v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask unused*/
 		else
 			v |= MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/
 		__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
 
 		v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
+		if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)
+			v |= MXC_H1_OC_POL_BIT;
+		else
+			v &= ~MXC_H1_OC_POL_BIT;
 		if (flags & MXC_EHCI_POWER_PINS_ENABLED)
 			v &= ~MXC_H1_OC_DIS_BIT; /* OC is used */
 		else
@@ -142,7 +157,7 @@ int mx51_initialize_usb_hw(int port, unsigned int flags)
 		}
 
 		if (flags & MXC_EHCI_POWER_PINS_ENABLED)
-			v &= ~MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/
+			v &= ~MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask unused*/
 		else
 			v |= MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/
 		__raw_writel(v, usbother_base + MXC_USBH2CTRL_OFFSET);

arch/arm/mach-imx/mach-mx35_3ds.c

@@ -572,6 +572,7 @@ static void __init mx35_3ds_init(void)
 
 	imx35_add_fec(NULL);
 	imx35_add_imx2_wdt(NULL);
+	imx35_add_mxc_rtc();
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	imx35_add_imx_uart0(&uart_pdata);

arch/arm/plat-mxc/devices/platform-mxc_rtc.c

@@ -20,6 +20,11 @@ const struct imx_mxc_rtc_data imx31_mxc_rtc_data __initconst =
 	imx_mxc_rtc_data_entry_single(MX31);
 #endif /* ifdef CONFIG_SOC_IMX31 */
 
+#ifdef CONFIG_SOC_IMX35
+const struct imx_mxc_rtc_data imx35_mxc_rtc_data __initconst =
+	imx_mxc_rtc_data_entry_single(MX35);
+#endif /* ifdef CONFIG_SOC_IMX35 */
+
 struct platform_device *__init imx_add_mxc_rtc(
 		const struct imx_mxc_rtc_data *data)
 {

arch/arm/plat-mxc/include/mach/iomux-mx51.h

@@ -107,11 +107,13 @@
 #define MX51_PAD_EIM_D25__UART2_CTS		IOMUX_PAD(0x414, 0x080, 4, __NA_, 0, MX51_UART_PAD_CTRL)
 #define MX51_PAD_EIM_D25__UART3_RXD		IOMUX_PAD(0x414, 0x080, 3, 0x9f4, 0, MX51_UART_PAD_CTRL)
 #define MX51_PAD_EIM_D25__USBOTG_DATA1		IOMUX_PAD(0x414, 0x080, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D25__GPT_CMPOUT1		IOMUX_PAD(0x414, 0x080, 5, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_EIM_D26__EIM_D26		IOMUX_PAD(0x418, 0x084, 0, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_EIM_D26__KEY_COL7		IOMUX_PAD(0x418, 0x084, 1, 0x9cc, 0, NO_PAD_CTRL)
 #define MX51_PAD_EIM_D26__UART2_RTS		IOMUX_PAD(0x418, 0x084, 4, 0x9e8, 3, MX51_UART_PAD_CTRL)
 #define MX51_PAD_EIM_D26__UART3_TXD		IOMUX_PAD(0x418, 0x084, 3, __NA_, 0, MX51_UART_PAD_CTRL)
 #define MX51_PAD_EIM_D26__USBOTG_DATA2		IOMUX_PAD(0x418, 0x084, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D26__GPT_CMPOUT2		IOMUX_PAD(0x418, 0x084, 5, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_EIM_D27__AUD6_RXC		IOMUX_PAD(0x41c, 0x088, 5, 0x8f4, 0, NO_PAD_CTRL)
 #define MX51_PAD_EIM_D27__EIM_D27		IOMUX_PAD(0x41c, 0x088, 0, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_EIM_D27__GPIO2_9		IOMUX_PAD(0x41c, 0x088, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
@@ -228,6 +230,7 @@
 #define MX51_PAD_EIM_CRE__EIM_CRE		IOMUX_PAD(0x4a0, 0x100, 0, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_EIM_CRE__GPIO3_2		IOMUX_PAD(0x4a0, 0x100, 1, 0x97c, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_DRAM_CS1__DRAM_CS1		IOMUX_PAD(0x4d0, 0x104, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DRAM_CS1__CCM_CLKO		IOMUX_PAD(0x4d0, 0x104, 1, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_WE_B__GPIO3_3		IOMUX_PAD(0x4e4, 0x108, 3, 0x980, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_NANDF_WE_B__NANDF_WE_B		IOMUX_PAD(0x4e4, 0x108, 0, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_WE_B__PATA_DIOW		IOMUX_PAD(0x4e4, 0x108, 1, __NA_, 0, NO_PAD_CTRL)
@@ -256,12 +259,14 @@
 #define MX51_PAD_NANDF_RB1__GPIO3_9		IOMUX_PAD(0x4fc, 0x120, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_NANDF_RB1__NANDF_RB1		IOMUX_PAD(0x4fc, 0x120, 0, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_RB1__PATA_IORDY		IOMUX_PAD(0x4fc, 0x120, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB1__GPT_CMPOUT2		IOMUX_PAD(0x4fc, 0x120, 4, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_RB1__SD4_CMD		IOMUX_PAD(0x4fc, 0x120, 0x15, __NA_, 0, MX51_SDHCI_PAD_CTRL)
 #define MX51_PAD_NANDF_RB2__DISP2_WAIT		IOMUX_PAD(0x500, 0x124, 5, 0x9a8, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_RB2__ECSPI2_SCLK		IOMUX_PAD(0x500, 0x124, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL)
 #define MX51_PAD_NANDF_RB2__FEC_COL		IOMUX_PAD(0x500, 0x124, 1, 0x94c, 0, MX51_PAD_CTRL_2)
 #define MX51_PAD_NANDF_RB2__GPIO3_10		IOMUX_PAD(0x500, 0x124, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_NANDF_RB2__NANDF_RB2		IOMUX_PAD(0x500, 0x124, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB2__GPT_CMPOUT3		IOMUX_PAD(0x500, 0x124, 4, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_RB2__USBH3_H3_DP		IOMUX_PAD(0x500, 0x124, 0x17, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_RB2__USBH3_NXT		IOMUX_PAD(0x500, 0x124, 6, 0xa20, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_RB3__DISP1_WAIT		IOMUX_PAD(0x504, 0x128, 5, __NA_, 0, NO_PAD_CTRL)
@@ -637,7 +642,9 @@
 #define MX51_PAD_DISP1_DAT23__DISP2_DAT17	IOMUX_PAD(0x728, 0x328, 5, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_DISP1_DAT23__DISP2_SER_CS	IOMUX_PAD(0x728, 0x328, 4, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_DI1_PIN3__DI1_PIN3		IOMUX_PAD(0x72c, 0x32c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_DISP_CLK__DI1_DISP_CLK	IOMUX_PAD(0x730, __NA_, 0, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_DI1_PIN2__DI1_PIN2		IOMUX_PAD(0x734, 0x330, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_PIN15__DI1_PIN15		IOMUX_PAD(0x738, __NA_, 0, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_DI_GP2__DISP1_SER_CLK		IOMUX_PAD(0x740, 0x338, 0, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_DI_GP2__DISP2_WAIT		IOMUX_PAD(0x740, 0x338, 2, 0x9a8, 1, NO_PAD_CTRL)
 #define MX51_PAD_DI_GP3__CSI1_DATA_EN		IOMUX_PAD(0x744, 0x33c, 3, 0x9a0, 1, NO_PAD_CTRL)
@@ -780,6 +787,8 @@
 #define MX51_PAD_GPIO1_2__PWM1_PWMO		IOMUX_PAD(0x7d4, 0x3cc, 1, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_GPIO1_3__GPIO1_3		IOMUX_PAD(0x7d8, 0x3d0, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_GPIO1_3__I2C2_SDA		IOMUX_PAD(0x7d8, 0x3d0, 0x12, 0x9bc, 3, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_GPIO1_3__CCM_CLKO2		IOMUX_PAD(0x7d8, 0x3d0, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_3__GPT_CLKIN		IOMUX_PAD(0x7d8, 0x3d0, 6, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_GPIO1_3__PLL2_BYP		IOMUX_PAD(0x7d8, 0x3d0, 7, 0x910, 1, NO_PAD_CTRL)
 #define MX51_PAD_GPIO1_3__PWM2_PWMO		IOMUX_PAD(0x7d8, 0x3d0, 1, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ	IOMUX_PAD(0x7fc, 0x3d4, 0, __NA_, 0, NO_PAD_CTRL)
@@ -788,13 +797,16 @@
 #define MX51_PAD_GPIO1_4__EIM_RDY		IOMUX_PAD(0x804, 0x3d8, 3, 0x938, 1, NO_PAD_CTRL)
 #define MX51_PAD_GPIO1_4__GPIO1_4		IOMUX_PAD(0x804, 0x3d8, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_GPIO1_4__WDOG1_WDOG_B		IOMUX_PAD(0x804, 0x3d8, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_4__GPT_CAPIN1		IOMUX_PAD(0x804, 0x3d8, 6, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_GPIO1_5__CSI2_MCLK		IOMUX_PAD(0x808, 0x3dc, 6, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_GPIO1_5__DISP2_PIN16		IOMUX_PAD(0x808, 0x3dc, 3, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_GPIO1_5__GPIO1_5		IOMUX_PAD(0x808, 0x3dc, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_GPIO1_5__WDOG2_WDOG_B		IOMUX_PAD(0x808, 0x3dc, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_5__CCM_CLKO		IOMUX_PAD(0x808, 0x3dc, 5, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_GPIO1_6__DISP2_PIN17		IOMUX_PAD(0x80c, 0x3e0, 4, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_GPIO1_6__GPIO1_6		IOMUX_PAD(0x80c, 0x3e0, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_GPIO1_6__REF_EN_B		IOMUX_PAD(0x80c, 0x3e0, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_6__GPT_CAPIN2		IOMUX_PAD(0x80c, 0x3e0, 6, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_GPIO1_7__CCM_OUT_0		IOMUX_PAD(0x810, 0x3e4, 3, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_GPIO1_7__GPIO1_7		IOMUX_PAD(0x810, 0x3e4, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_GPIO1_7__SD2_WP		IOMUX_PAD(0x810, 0x3e4, 6, __NA_, 0, MX51_ESDHC_PAD_CTRL)
@@ -803,11 +815,13 @@
 #define MX51_PAD_GPIO1_8__GPIO1_8		IOMUX_PAD(0x814, 0x3e8, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_GPIO1_8__SD2_CD		IOMUX_PAD(0x814, 0x3e8, 6, __NA_, 0, MX51_ESDHC_PAD_CTRL)
 #define MX51_PAD_GPIO1_8__USBH3_PWR		IOMUX_PAD(0x814, 0x3e8, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_8__CCM_CLKO2		IOMUX_PAD(0x814, 0x3e8, 4, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_GPIO1_9__CCM_OUT_1		IOMUX_PAD(0x818, 0x3ec, 3, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_GPIO1_9__DISP2_D1_CS		IOMUX_PAD(0x818, 0x3ec, 2, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_GPIO1_9__DISP2_SER_CS		IOMUX_PAD(0x818, 0x3ec, 7, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_GPIO1_9__GPIO1_9		IOMUX_PAD(0x818, 0x3ec, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_GPIO1_9__SD2_LCTL		IOMUX_PAD(0x818, 0x3ec, 6, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_GPIO1_9__USBH3_OC		IOMUX_PAD(0x818, 0x3ec, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_9__CCM_CLKO		IOMUX_PAD(0x818, 0x3ec, 4, __NA_, 0, NO_PAD_CTRL)
 
 #endif /* __MACH_IOMUX_MX51_H__ */

arch/arm/plat-mxc/include/mach/mxc_ehci.h

@@ -20,13 +20,15 @@
 #define MXC_EHCI_INTERFACE_MASK		(0xf)
 
 #define MXC_EHCI_POWER_PINS_ENABLED	(1 << 5)
-#define MXC_EHCI_TTL_ENABLED		(1 << 6)
-
-#define MXC_EHCI_INTERNAL_PHY		(1 << 7)
-#define MXC_EHCI_IPPUE_DOWN		(1 << 8)
-#define MXC_EHCI_IPPUE_UP		(1 << 9)
-#define MXC_EHCI_WAKEUP_ENABLED	(1 << 10)
-#define MXC_EHCI_ITC_NO_THRESHOLD	(1 << 11)
+#define MXC_EHCI_PWR_PIN_ACTIVE_HIGH	(1 << 6)
+#define MXC_EHCI_OC_PIN_ACTIVE_LOW	(1 << 7)
+#define MXC_EHCI_TTL_ENABLED		(1 << 8)
+
+#define MXC_EHCI_INTERNAL_PHY		(1 << 9)
+#define MXC_EHCI_IPPUE_DOWN		(1 << 10)
+#define MXC_EHCI_IPPUE_UP		(1 << 11)
+#define MXC_EHCI_WAKEUP_ENABLED		(1 << 12)
+#define MXC_EHCI_ITC_NO_THRESHOLD	(1 << 13)
 
 #define MXC_USBCTRL_OFFSET		0
 #define MXC_USB_PHY_CTR_FUNC_OFFSET	0x8