Merge tag 'ntb-4.20' of git://github.com/jonmason/ntb

Pull NTB updates from Jon Mason:
 "Fairly minor changes and bug fixes:

  NTB IDT thermal changes and hook into hwmon, ntb_netdev clean-up of
  private struct, and a few bug fixes"

* tag 'ntb-4.20' of git://github.com/jonmason/ntb:
  ntb: idt: Alter the driver info comments
  ntb: idt: Discard temperature sensor IRQ handler
  ntb: idt: Add basic hwmon sysfs interface
  ntb: idt: Alter temperature read method
  ntb_netdev: Simplify remove with client device drvdata
  NTB: transport: Try harder to alloc an aligned MW buffer
  ntb: ntb_transport: Mark expected switch fall-throughs
  ntb: idt: Set PCIe bus address to BARLIMITx
  NTB: ntb_hw_idt: replace IS_ERR_OR_NULL with regular NULL checks
  ntb: intel: fix return value for ndev_vec_mask()
  ntb_netdev: fix sleep time mismatch

drivers/net/ntb_netdev.c

@@ -71,7 +71,6 @@ static unsigned int tx_start = 10;
 static unsigned int tx_stop = 5;
 
 struct ntb_netdev {
-	struct list_head list;
 	struct pci_dev *pdev;
 	struct net_device *ndev;
 	struct ntb_transport_qp *qp;
@@ -81,8 +80,6 @@ struct ntb_netdev {
 #define	NTB_TX_TIMEOUT_MS	1000
 #define	NTB_RXQ_SIZE		100
 
-static LIST_HEAD(dev_list);
-
 static void ntb_netdev_event_handler(void *data, int link_is_up)
 {
 	struct net_device *ndev = data;
@@ -236,7 +233,7 @@ static void ntb_netdev_tx_timer(struct timer_list *t)
 	struct net_device *ndev = dev->ndev;
 
 	if (ntb_transport_tx_free_entry(dev->qp) < tx_stop) {
-		mod_timer(&dev->tx_timer, jiffies + msecs_to_jiffies(tx_time));
+		mod_timer(&dev->tx_timer, jiffies + usecs_to_jiffies(tx_time));
 	} else {
 		/* Make sure anybody stopping the queue after this sees the new
 		 * value of ntb_transport_tx_free_entry()
@@ -452,7 +449,7 @@ static int ntb_netdev_probe(struct device *client_dev)
 	if (rc)
 		goto err1;
 
-	list_add(&dev->list, &dev_list);
+	dev_set_drvdata(client_dev, ndev);
 	dev_info(&pdev->dev, "%s created\n", ndev->name);
 	return 0;
 
@@ -465,27 +462,8 @@ err:
 
 static void ntb_netdev_remove(struct device *client_dev)
 {
-	struct ntb_dev *ntb;
-	struct net_device *ndev;
-	struct pci_dev *pdev;
-	struct ntb_netdev *dev;
-	bool found = false;
-
-	ntb = dev_ntb(client_dev->parent);
-	pdev = ntb->pdev;
-
-	list_for_each_entry(dev, &dev_list, list) {
-		if (dev->pdev == pdev) {
-			found = true;
-			break;
-		}
-	}
-	if (!found)
-		return;
-
-	list_del(&dev->list);
-
-	ndev = dev->ndev;
+	struct net_device *ndev = dev_get_drvdata(client_dev);
+	struct ntb_netdev *dev = netdev_priv(ndev);
 
 	unregister_netdev(ndev);
 	ntb_transport_free_queue(dev->qp);

drivers/ntb/hw/idt/Kconfig

@@ -1,6 +1,7 @@
 config NTB_IDT
 	tristate "IDT PCIe-switch Non-Transparent Bridge support"
 	depends on PCI
+	select HWMON
 	help
 	 This driver supports NTB of cappable IDT PCIe-switches.
 
@@ -23,9 +24,7 @@ config NTB_IDT
 	 BAR settings of peer NT-functions, the BAR setups can't be done over
 	 kernel PCI fixups. That's why the alternative pre-initialization
 	 techniques like BIOS using SMBus interface or EEPROM should be
-	 utilized. Additionally if one needs to have temperature sensor
-	 information printed to system log, the corresponding registers must
-	 be initialized within BIOS/EEPROM as well.
+	 utilized.
 
 	 If unsure, say N.
 

drivers/ntb/hw/idt/ntb_hw_idt.c

@@ -4,7 +4,7 @@
  *
  *   GPL LICENSE SUMMARY
  *
- *   Copyright (C) 2016 T-Platforms All Rights Reserved.
+ *   Copyright (C) 2016-2018 T-Platforms JSC All Rights Reserved.
  *
  *   This program is free software; you can redistribute it and/or modify it
  *   under the terms and conditions of the GNU General Public License,
@@ -49,11 +49,14 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
+#include <linux/mutex.h>
 #include <linux/pci.h>
 #include <linux/aer.h>
 #include <linux/slab.h>
 #include <linux/list.h>
 #include <linux/debugfs.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
 #include <linux/ntb.h>
 
 #include "ntb_hw_idt.h"
@@ -1105,9 +1108,9 @@ static struct idt_mw_cfg *idt_scan_mws(struct idt_ntb_dev *ndev, int port,
 	}
 
 	/* Allocate memory for memory window descriptors */
-	ret_mws = devm_kcalloc(&ndev->ntb.pdev->dev, *mw_cnt,
-				sizeof(*ret_mws), GFP_KERNEL);
-	if (IS_ERR_OR_NULL(ret_mws))
+	ret_mws = devm_kcalloc(&ndev->ntb.pdev->dev, *mw_cnt, sizeof(*ret_mws),
+			       GFP_KERNEL);
+	if (!ret_mws)
 		return ERR_PTR(-ENOMEM);
 
 	/* Copy the info of detected memory windows */
@@ -1320,7 +1323,7 @@ static int idt_ntb_peer_mw_set_trans(struct ntb_dev *ntb, int pidx, int widx,
 		idt_nt_write(ndev, bar->ltbase, (u32)addr);
 		idt_nt_write(ndev, bar->utbase, (u32)(addr >> 32));
 		/* Set the custom BAR aperture limit */
-		limit = pci_resource_start(ntb->pdev, mw_cfg->bar) + size;
+		limit = pci_bus_address(ntb->pdev, mw_cfg->bar) + size;
 		idt_nt_write(ndev, bar->limit, (u32)limit);
 		if (IS_FLD_SET(BARSETUP_TYPE, data, 64))
 			idt_nt_write(ndev, (bar + 1)->limit, (limit >> 32));
@@ -1821,61 +1824,284 @@ static int idt_ntb_peer_msg_write(struct ntb_dev *ntb, int pidx, int midx,
  *                      7. Temperature sensor operations
  *
  *    IDT PCIe-switch has an embedded temperature sensor, which can be used to
- * warn a user-space of possible chip overheating. Since workload temperature
- * can be different on different platforms, temperature thresholds as well as
- * general sensor settings must be setup in the framework of BIOS/EEPROM
- * initializations. It includes the actual sensor enabling as well.
+ * check current chip core temperature. Since a workload environment can be
+ * different on different platforms, an offset and ADC/filter settings can be
+ * specified. Although the offset configuration is only exposed to the sysfs
+ * hwmon interface at the moment. The rest of the settings can be adjusted
+ * for instance by the BIOS/EEPROM firmware.
  *=============================================================================
  */
 
+/*
+ * idt_get_deg() - convert millidegree Celsius value to just degree
+ * @mdegC:	IN - millidegree Celsius value
+ *
+ * Return: Degree corresponding to the passed millidegree value
+ */
+static inline s8 idt_get_deg(long mdegC)
+{
+	return mdegC / 1000;
+}
+
+/*
+ * idt_get_frac() - retrieve 0/0.5 fraction of the millidegree Celsius value
+ * @mdegC:	IN - millidegree Celsius value
+ *
+ * Return: 0/0.5 degree fraction of the passed millidegree value
+ */
+static inline u8 idt_get_deg_frac(long mdegC)
+{
+	return (mdegC % 1000) >= 500 ? 5 : 0;
+}
+
+/*
+ * idt_get_temp_fmt() - convert millidegree Celsius value to 0:7:1 format
+ * @mdegC:	IN - millidegree Celsius value
+ *
+ * Return: 0:7:1 format acceptable by the IDT temperature sensor
+ */
+static inline u8 idt_temp_get_fmt(long mdegC)
+{
+	return (idt_get_deg(mdegC) << 1) | (idt_get_deg_frac(mdegC) ? 1 : 0);
+}
+
+/*
+ * idt_get_temp_sval() - convert temp sample to signed millidegree Celsius
+ * @data:	IN - shifted to LSB 8-bits temperature sample
+ *
+ * Return: signed millidegree Celsius
+ */
+static inline long idt_get_temp_sval(u32 data)
+{
+	return ((s8)data / 2) * 1000 + (data & 0x1 ? 500 : 0);
+}
+
+/*
+ * idt_get_temp_sval() - convert temp sample to unsigned millidegree Celsius
+ * @data:	IN - shifted to LSB 8-bits temperature sample
+ *
+ * Return: unsigned millidegree Celsius
+ */
+static inline long idt_get_temp_uval(u32 data)
+{
+	return (data / 2) * 1000 + (data & 0x1 ? 500 : 0);
+}
+
 /*
  * idt_read_temp() - read temperature from chip sensor
  * @ntb:	NTB device context.
- * @val:	OUT - integer value of temperature
- * @frac:	OUT - fraction
+ * @type:	IN - type of the temperature value to read
+ * @val:	OUT - integer value of temperature in millidegree Celsius
  */
-static void idt_read_temp(struct idt_ntb_dev *ndev, unsigned char *val,
-			  unsigned char *frac)
+static void idt_read_temp(struct idt_ntb_dev *ndev,
+			  const enum idt_temp_val type, long *val)
 {
 	u32 data;
 
-	/* Read the data from TEMP field of the TMPSTS register */
-	data = idt_sw_read(ndev, IDT_SW_TMPSTS);
-	data = GET_FIELD(TMPSTS_TEMP, data);
-	/* TEMP field has one fractional bit and seven integer bits */
-	*val = data >> 1;
-	*frac = ((data & 0x1) ? 5 : 0);
+	/* Alter the temperature field in accordance with the passed type */
+	switch (type) {
+	case IDT_TEMP_CUR:
+		data = GET_FIELD(TMPSTS_TEMP,
+				 idt_sw_read(ndev, IDT_SW_TMPSTS));
+		break;
+	case IDT_TEMP_LOW:
+		data = GET_FIELD(TMPSTS_LTEMP,
+				 idt_sw_read(ndev, IDT_SW_TMPSTS));
+		break;
+	case IDT_TEMP_HIGH:
+		data = GET_FIELD(TMPSTS_HTEMP,
+				 idt_sw_read(ndev, IDT_SW_TMPSTS));
+		break;
+	case IDT_TEMP_OFFSET:
+		/* This is the only field with signed 0:7:1 format */
+		data = GET_FIELD(TMPADJ_OFFSET,
+				 idt_sw_read(ndev, IDT_SW_TMPADJ));
+		*val = idt_get_temp_sval(data);
+		return;
+	default:
+		data = GET_FIELD(TMPSTS_TEMP,
+				 idt_sw_read(ndev, IDT_SW_TMPSTS));
+		break;
+	}
+
+	/* The rest of the fields accept unsigned 0:7:1 format */
+	*val = idt_get_temp_uval(data);
 }
 
 /*
- * idt_temp_isr() - temperature sensor alarm events ISR
- * @ndev:	IDT NTB hardware driver descriptor
- * @ntint_sts:	NT-function interrupt status
+ * idt_write_temp() - write temperature to the chip sensor register
+ * @ntb:	NTB device context.
+ * @type:	IN - type of the temperature value to change
+ * @val:	IN - integer value of temperature in millidegree Celsius
+ */
+static void idt_write_temp(struct idt_ntb_dev *ndev,
+			   const enum idt_temp_val type, const long val)
+{
+	unsigned int reg;
+	u32 data;
+	u8 fmt;
+
+	/* Retrieve the properly formatted temperature value */
+	fmt = idt_temp_get_fmt(val);
+
+	mutex_lock(&ndev->hwmon_mtx);
+	switch (type) {
+	case IDT_TEMP_LOW:
+		reg = IDT_SW_TMPALARM;
+		data = SET_FIELD(TMPALARM_LTEMP, idt_sw_read(ndev, reg), fmt) &
+			~IDT_TMPALARM_IRQ_MASK;
+		break;
+	case IDT_TEMP_HIGH:
+		reg = IDT_SW_TMPALARM;
+		data = SET_FIELD(TMPALARM_HTEMP, idt_sw_read(ndev, reg), fmt) &
+			~IDT_TMPALARM_IRQ_MASK;
+		break;
+	case IDT_TEMP_OFFSET:
+		reg = IDT_SW_TMPADJ;
+		data = SET_FIELD(TMPADJ_OFFSET, idt_sw_read(ndev, reg), fmt);
+		break;
+	default:
+		goto inval_spin_unlock;
+	}
+
+	idt_sw_write(ndev, reg, data);
+
+inval_spin_unlock:
+	mutex_unlock(&ndev->hwmon_mtx);
+}
+
+/*
+ * idt_sysfs_show_temp() - printout corresponding temperature value
+ * @dev:	Pointer to the NTB device structure
+ * @da:		Sensor device attribute structure
+ * @buf:	Buffer to print temperature out
  *
- * It handles events of temperature crossing alarm thresholds. Since reading
- * of TMPALARM register clears it up, the function doesn't analyze the
- * read value, instead the current temperature value just warningly printed to
- * log.
- * The method is called from PCIe ISR bottom-half routine.
+ * Return: Number of written symbols or negative error
  */
-static void idt_temp_isr(struct idt_ntb_dev *ndev, u32 ntint_sts)
+static ssize_t idt_sysfs_show_temp(struct device *dev,
+				   struct device_attribute *da, char *buf)
 {
-	unsigned char val, frac;
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+	struct idt_ntb_dev *ndev = dev_get_drvdata(dev);
+	enum idt_temp_val type = attr->index;
+	long mdeg;
 
-	/* Read the current temperature value */
-	idt_read_temp(ndev, &val, &frac);
+	idt_read_temp(ndev, type, &mdeg);
+	return sprintf(buf, "%ld\n", mdeg);
+}
 
-	/* Read the temperature alarm to clean the alarm status out */
-	/*(void)idt_sw_read(ndev, IDT_SW_TMPALARM);*/
+/*
+ * idt_sysfs_set_temp() - set corresponding temperature value
+ * @dev:	Pointer to the NTB device structure
+ * @da:		Sensor device attribute structure
+ * @buf:	Buffer to print temperature out
+ * @count:	Size of the passed buffer
+ *
+ * Return: Number of written symbols or negative error
+ */
+static ssize_t idt_sysfs_set_temp(struct device *dev,
+				  struct device_attribute *da, const char *buf,
+				  size_t count)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+	struct idt_ntb_dev *ndev = dev_get_drvdata(dev);
+	enum idt_temp_val type = attr->index;
+	long mdeg;
+	int ret;
 
-	/* Clean the corresponding interrupt bit */
-	idt_nt_write(ndev, IDT_NT_NTINTSTS, IDT_NTINTSTS_TMPSENSOR);
+	ret = kstrtol(buf, 10, &mdeg);
+	if (ret)
+		return ret;
+
+	/* Clamp the passed value in accordance with the type */
+	if (type == IDT_TEMP_OFFSET)
+		mdeg = clamp_val(mdeg, IDT_TEMP_MIN_OFFSET,
+				 IDT_TEMP_MAX_OFFSET);
+	else
+		mdeg = clamp_val(mdeg, IDT_TEMP_MIN_MDEG, IDT_TEMP_MAX_MDEG);
+
+	idt_write_temp(ndev, type, mdeg);
+
+	return count;
+}
+
+/*
+ * idt_sysfs_reset_hist() - reset temperature history
+ * @dev:	Pointer to the NTB device structure
+ * @da:		Sensor device attribute structure
+ * @buf:	Buffer to print temperature out
+ * @count:	Size of the passed buffer
+ *
+ * Return: Number of written symbols or negative error
+ */
+static ssize_t idt_sysfs_reset_hist(struct device *dev,
+				    struct device_attribute *da,
+				    const char *buf, size_t count)
+{
+	struct idt_ntb_dev *ndev = dev_get_drvdata(dev);
+
+	/* Just set the maximal value to the lowest temperature field and
+	 * minimal value to the highest temperature field
+	 */
+	idt_write_temp(ndev, IDT_TEMP_LOW, IDT_TEMP_MAX_MDEG);
+	idt_write_temp(ndev, IDT_TEMP_HIGH, IDT_TEMP_MIN_MDEG);
 
-	dev_dbg(&ndev->ntb.pdev->dev,
-		"Temp sensor IRQ detected %#08x", ntint_sts);
+	return count;
+}
+
+/*
+ * Hwmon IDT sysfs attributes
+ */
+static SENSOR_DEVICE_ATTR(temp1_input, 0444, idt_sysfs_show_temp, NULL,
+			  IDT_TEMP_CUR);
+static SENSOR_DEVICE_ATTR(temp1_lowest, 0444, idt_sysfs_show_temp, NULL,
+			  IDT_TEMP_LOW);
+static SENSOR_DEVICE_ATTR(temp1_highest, 0444, idt_sysfs_show_temp, NULL,
+			  IDT_TEMP_HIGH);
+static SENSOR_DEVICE_ATTR(temp1_offset, 0644, idt_sysfs_show_temp,
+			  idt_sysfs_set_temp, IDT_TEMP_OFFSET);
+static DEVICE_ATTR(temp1_reset_history, 0200, NULL, idt_sysfs_reset_hist);
 
-	/* Print temperature value to log */
-	dev_warn(&ndev->ntb.pdev->dev, "Temperature %hhu.%hhu", val, frac);
+/*
+ * Hwmon IDT sysfs attributes group
+ */
+static struct attribute *idt_temp_attrs[] = {
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_temp1_lowest.dev_attr.attr,
+	&sensor_dev_attr_temp1_highest.dev_attr.attr,
+	&sensor_dev_attr_temp1_offset.dev_attr.attr,
+	&dev_attr_temp1_reset_history.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(idt_temp);
+
+/*
+ * idt_init_temp() - initialize temperature sensor interface
+ * @ndev:	IDT NTB hardware driver descriptor
+ *
+ * Simple sensor initializarion method is responsible for device switching
+ * on and resource management based hwmon interface registration. Note, that
+ * since the device is shared we won't disable it on remove, but leave it
+ * working until the system is powered off.
+ */
+static void idt_init_temp(struct idt_ntb_dev *ndev)
+{
+	struct device *hwmon;
+
+	/* Enable sensor if it hasn't been already */
+	idt_sw_write(ndev, IDT_SW_TMPCTL, 0x0);
+
+	/* Initialize hwmon interface fields */
+	mutex_init(&ndev->hwmon_mtx);
+
+	hwmon = devm_hwmon_device_register_with_groups(&ndev->ntb.pdev->dev,
+		ndev->swcfg->name, ndev, idt_temp_groups);
+	if (IS_ERR(hwmon)) {
+		dev_err(&ndev->ntb.pdev->dev, "Couldn't create hwmon device");
+		return;
+	}
+
+	dev_dbg(&ndev->ntb.pdev->dev, "Temperature HWmon interface registered");
 }
 
 /*=============================================================================
@@ -1931,7 +2157,7 @@ static int idt_init_isr(struct idt_ntb_dev *ndev)
 		goto err_free_vectors;
 	}
 
-	/* Unmask Message/Doorbell/SE/Temperature interrupts */
+	/* Unmask Message/Doorbell/SE interrupts */
 	ntint_mask = idt_nt_read(ndev, IDT_NT_NTINTMSK) & ~IDT_NTINTMSK_ALL;
 	idt_nt_write(ndev, IDT_NT_NTINTMSK, ntint_mask);
 
@@ -1946,7 +2172,6 @@ err_free_vectors:
 	return ret;
 }
 
-
 /*
  * idt_deinit_ist() - deinitialize PCIe interrupt handler
  * @ndev:	IDT NTB hardware driver descriptor
@@ -2007,12 +2232,6 @@ static irqreturn_t idt_thread_isr(int irq, void *devid)
 		handled = true;
 	}
 
-	/* Handle temperature sensor interrupt */
-	if (ntint_sts & IDT_NTINTSTS_TMPSENSOR) {
-		idt_temp_isr(ndev, ntint_sts);
-		handled = true;
-	}
-
 	dev_dbg(&ndev->ntb.pdev->dev, "IDT IRQs 0x%08x handled", ntint_sts);
 
 	return handled ? IRQ_HANDLED : IRQ_NONE;
@@ -2123,9 +2342,9 @@ static ssize_t idt_dbgfs_info_read(struct file *filp, char __user *ubuf,
 				   size_t count, loff_t *offp)
 {
 	struct idt_ntb_dev *ndev = filp->private_data;
-	unsigned char temp, frac, idx, pidx, cnt;
+	unsigned char idx, pidx, cnt;
+	unsigned long irqflags, mdeg;
 	ssize_t ret = 0, off = 0;
-	unsigned long irqflags;
 	enum ntb_speed speed;
 	enum ntb_width width;
 	char *strbuf;
@@ -2274,9 +2493,10 @@ static ssize_t idt_dbgfs_info_read(struct file *filp, char __user *ubuf,
 	off += scnprintf(strbuf + off, size - off, "\n");
 
 	/* Current temperature */
-	idt_read_temp(ndev, &temp, &frac);
+	idt_read_temp(ndev, IDT_TEMP_CUR, &mdeg);
 	off += scnprintf(strbuf + off, size - off,
-		"Switch temperature\t\t- %hhu.%hhuC\n", temp, frac);
+		"Switch temperature\t\t- %hhd.%hhuC\n",
+		idt_get_deg(mdeg), idt_get_deg_frac(mdeg));
 
 	/* Copy the buffer to the User Space */
 	ret = simple_read_from_buffer(ubuf, count, offp, strbuf, off);
@@ -2390,7 +2610,7 @@ static struct idt_ntb_dev *idt_create_dev(struct pci_dev *pdev,
 
 	/* Allocate memory for the IDT PCIe-device descriptor */
 	ndev = devm_kzalloc(&pdev->dev, sizeof(*ndev), GFP_KERNEL);
-	if (IS_ERR_OR_NULL(ndev)) {
+	if (!ndev) {
 		dev_err(&pdev->dev, "Memory allocation failed for descriptor");
 		return ERR_PTR(-ENOMEM);
 	}
@@ -2571,6 +2791,9 @@ static int idt_pci_probe(struct pci_dev *pdev,
 	/* Initialize Messaging subsystem */
 	idt_init_msg(ndev);
 
+	/* Initialize hwmon interface */
+	idt_init_temp(ndev);
+
 	/* Initialize IDT interrupts handler */
 	ret = idt_init_isr(ndev);
 	if (ret != 0)

drivers/ntb/hw/idt/ntb_hw_idt.h

@@ -4,7 +4,7 @@
  *
  *   GPL LICENSE SUMMARY
  *
- *   Copyright (C) 2016 T-Platforms All Rights Reserved.
+ *   Copyright (C) 2016-2018 T-Platforms JSC All Rights Reserved.
  *
  *   This program is free software; you can redistribute it and/or modify it
  *   under the terms and conditions of the GNU General Public License,
@@ -47,9 +47,9 @@
 #include <linux/pci_ids.h>
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
+#include <linux/mutex.h>
 #include <linux/ntb.h>
 
-
 /*
  * Macro is used to create the struct pci_device_id that matches
  * the supported IDT PCIe-switches
@@ -688,15 +688,14 @@
  * @IDT_NTINTMSK_DBELL:		Doorbell interrupt mask bit
  * @IDT_NTINTMSK_SEVENT:	Switch Event interrupt mask bit
  * @IDT_NTINTMSK_TMPSENSOR:	Temperature sensor interrupt mask bit
- * @IDT_NTINTMSK_ALL:		All the useful interrupts mask
+ * @IDT_NTINTMSK_ALL:		NTB-related interrupts mask
  */
 #define IDT_NTINTMSK_MSG		0x00000001U
 #define IDT_NTINTMSK_DBELL		0x00000002U
 #define IDT_NTINTMSK_SEVENT		0x00000008U
 #define IDT_NTINTMSK_TMPSENSOR		0x00000080U
 #define IDT_NTINTMSK_ALL \
-	(IDT_NTINTMSK_MSG | IDT_NTINTMSK_DBELL | \
-	 IDT_NTINTMSK_SEVENT | IDT_NTINTMSK_TMPSENSOR)
+	(IDT_NTINTMSK_MSG | IDT_NTINTMSK_DBELL | IDT_NTINTMSK_SEVENT)
 
 /*
  * NTGSIGNAL register fields related constants
@@ -885,13 +884,61 @@
 #define IDT_SWPxMSGCTL_PART_MASK	0x00000070U
 #define IDT_SWPxMSGCTL_PART_FLD		4
 
+/*
+ * TMPCTL register fields related constants
+ * @IDT_TMPCTL_LTH_MASK:	Low temperature threshold field mask
+ * @IDT_TMPCTL_LTH_FLD:		Low temperature threshold field offset
+ * @IDT_TMPCTL_MTH_MASK:	Middle temperature threshold field mask
+ * @IDT_TMPCTL_MTH_FLD:		Middle temperature threshold field offset
+ * @IDT_TMPCTL_HTH_MASK:	High temperature threshold field mask
+ * @IDT_TMPCTL_HTH_FLD:		High temperature threshold field offset
+ * @IDT_TMPCTL_PDOWN:		Temperature sensor power down
+ */
+#define IDT_TMPCTL_LTH_MASK		0x000000FFU
+#define IDT_TMPCTL_LTH_FLD		0
+#define IDT_TMPCTL_MTH_MASK		0x0000FF00U
+#define IDT_TMPCTL_MTH_FLD		8
+#define IDT_TMPCTL_HTH_MASK		0x00FF0000U
+#define IDT_TMPCTL_HTH_FLD		16
+#define IDT_TMPCTL_PDOWN		0x80000000U
+
 /*
  * TMPSTS register fields related constants
  * @IDT_TMPSTS_TEMP_MASK:	Current temperature field mask
  * @IDT_TMPSTS_TEMP_FLD:	Current temperature field offset
+ * @IDT_TMPSTS_LTEMP_MASK:	Lowest temperature field mask
+ * @IDT_TMPSTS_LTEMP_FLD:	Lowest temperature field offset
+ * @IDT_TMPSTS_HTEMP_MASK:	Highest temperature field mask
+ * @IDT_TMPSTS_HTEMP_FLD:	Highest temperature field offset
  */
 #define IDT_TMPSTS_TEMP_MASK		0x000000FFU
 #define IDT_TMPSTS_TEMP_FLD		0
+#define IDT_TMPSTS_LTEMP_MASK		0x0000FF00U
+#define IDT_TMPSTS_LTEMP_FLD		8
+#define IDT_TMPSTS_HTEMP_MASK		0x00FF0000U
+#define IDT_TMPSTS_HTEMP_FLD		16
+
+/*
+ * TMPALARM register fields related constants
+ * @IDT_TMPALARM_LTEMP_MASK:	Lowest temperature field mask
+ * @IDT_TMPALARM_LTEMP_FLD:	Lowest temperature field offset
+ * @IDT_TMPALARM_HTEMP_MASK:	Highest temperature field mask
+ * @IDT_TMPALARM_HTEMP_FLD:	Highest temperature field offset
+ * @IDT_TMPALARM_IRQ_MASK:	Alarm IRQ status mask
+ */
+#define IDT_TMPALARM_LTEMP_MASK		0x0000FF00U
+#define IDT_TMPALARM_LTEMP_FLD		8
+#define IDT_TMPALARM_HTEMP_MASK		0x00FF0000U
+#define IDT_TMPALARM_HTEMP_FLD		16
+#define IDT_TMPALARM_IRQ_MASK		0x3F000000U
+
+/*
+ * TMPADJ register fields related constants
+ * @IDT_TMPADJ_OFFSET_MASK:	Temperature value offset field mask
+ * @IDT_TMPADJ_OFFSET_FLD:	Temperature value offset field offset
+ */
+#define IDT_TMPADJ_OFFSET_MASK		0x000000FFU
+#define IDT_TMPADJ_OFFSET_FLD		0
 
 /*
  * Helper macro to get/set the corresponding field value
@@ -950,6 +997,32 @@
 #define IDT_TRANS_ALIGN		4
 #define IDT_DIR_SIZE_ALIGN	1
 
+/*
+ * IDT PCIe-switch temperature sensor value limits
+ * @IDT_TEMP_MIN_MDEG:	Minimal integer value of temperature
+ * @IDT_TEMP_MAX_MDEG:	Maximal integer value of temperature
+ * @IDT_TEMP_MIN_OFFSET:Minimal integer value of temperature offset
+ * @IDT_TEMP_MAX_OFFSET:Maximal integer value of temperature offset
+ */
+#define IDT_TEMP_MIN_MDEG	0
+#define IDT_TEMP_MAX_MDEG	127500
+#define IDT_TEMP_MIN_OFFSET	-64000
+#define IDT_TEMP_MAX_OFFSET	63500
+
+/*
+ * Temperature sensor values enumeration
+ * @IDT_TEMP_CUR:	Current temperature
+ * @IDT_TEMP_LOW:	Lowest historical temperature
+ * @IDT_TEMP_HIGH:	Highest historical temperature
+ * @IDT_TEMP_OFFSET:	Current temperature offset
+ */
+enum idt_temp_val {
+	IDT_TEMP_CUR,
+	IDT_TEMP_LOW,
+	IDT_TEMP_HIGH,
+	IDT_TEMP_OFFSET
+};
+
 /*
  * IDT Memory Windows type. Depending on the device settings, IDT supports
  * Direct Address Translation MW registers and Lookup Table registers
@@ -1044,6 +1117,8 @@ struct idt_ntb_peer {
  * @msg_mask_lock:	Message mask register lock
  * @gasa_lock:		GASA registers access lock
  *
+ * @hwmon_mtx:		Temperature sensor interface update mutex
+ *
  * @dbgfs_info:		DebugFS info node
  */
 struct idt_ntb_dev {
@@ -1071,6 +1146,8 @@ struct idt_ntb_dev {
 	spinlock_t msg_mask_lock;
 	spinlock_t gasa_lock;
 
+	struct mutex hwmon_mtx;
+
 	struct dentry *dbgfs_info;
 };
 #define to_ndev_ntb(__ntb) container_of(__ntb, struct idt_ntb_dev, ntb)

drivers/ntb/hw/intel/ntb_hw_gen1.c

@@ -265,7 +265,7 @@ static inline int ndev_db_clear_mask(struct intel_ntb_dev *ndev, u64 db_bits,
 	return 0;
 }
 
-static inline int ndev_vec_mask(struct intel_ntb_dev *ndev, int db_vector)
+static inline u64 ndev_vec_mask(struct intel_ntb_dev *ndev, int db_vector)
 {
 	u64 shift, mask;
 

drivers/ntb/ntb_transport.c

@@ -194,6 +194,8 @@ struct ntb_transport_mw {
 	void __iomem *vbase;
 	size_t xlat_size;
 	size_t buff_size;
+	size_t alloc_size;
+	void *alloc_addr;
 	void *virt_addr;
 	dma_addr_t dma_addr;
 };
@@ -672,13 +674,59 @@ static void ntb_free_mw(struct ntb_transport_ctx *nt, int num_mw)
 		return;
 
 	ntb_mw_clear_trans(nt->ndev, PIDX, num_mw);
-	dma_free_coherent(&pdev->dev, mw->buff_size,
-			  mw->virt_addr, mw->dma_addr);
+	dma_free_coherent(&pdev->dev, mw->alloc_size,
+			  mw->alloc_addr, mw->dma_addr);
 	mw->xlat_size = 0;
 	mw->buff_size = 0;
+	mw->alloc_size = 0;
+	mw->alloc_addr = NULL;
 	mw->virt_addr = NULL;
 }
 
+static int ntb_alloc_mw_buffer(struct ntb_transport_mw *mw,
+			       struct device *dma_dev, size_t align)
+{
+	dma_addr_t dma_addr;
+	void *alloc_addr, *virt_addr;
+	int rc;
+
+	alloc_addr = dma_alloc_coherent(dma_dev, mw->alloc_size,
+					&dma_addr, GFP_KERNEL);
+	if (!alloc_addr) {
+		dev_err(dma_dev, "Unable to alloc MW buff of size %zu\n",
+			mw->alloc_size);
+		return -ENOMEM;
+	}
+	virt_addr = alloc_addr;
+
+	/*
+	 * we must ensure that the memory address allocated is BAR size
+	 * aligned in order for the XLAT register to take the value. This
+	 * is a requirement of the hardware. It is recommended to setup CMA
+	 * for BAR sizes equal or greater than 4MB.
+	 */
+	if (!IS_ALIGNED(dma_addr, align)) {
+		if (mw->alloc_size > mw->buff_size) {
+			virt_addr = PTR_ALIGN(alloc_addr, align);
+			dma_addr = ALIGN(dma_addr, align);
+		} else {
+			rc = -ENOMEM;
+			goto err;
+		}
+	}
+
+	mw->alloc_addr = alloc_addr;
+	mw->virt_addr = virt_addr;
+	mw->dma_addr = dma_addr;
+
+	return 0;
+
+err:
+	dma_free_coherent(dma_dev, mw->alloc_size, alloc_addr, dma_addr);
+
+	return rc;
+}
+
 static int ntb_set_mw(struct ntb_transport_ctx *nt, int num_mw,
 		      resource_size_t size)
 {
@@ -710,28 +758,20 @@ static int ntb_set_mw(struct ntb_transport_ctx *nt, int num_mw,
 	/* Alloc memory for receiving data.  Must be aligned */
 	mw->xlat_size = xlat_size;
 	mw->buff_size = buff_size;
+	mw->alloc_size = buff_size;
 
-	mw->virt_addr = dma_alloc_coherent(&pdev->dev, buff_size,
-					   &mw->dma_addr, GFP_KERNEL);
-	if (!mw->virt_addr) {
-		mw->xlat_size = 0;
-		mw->buff_size = 0;
-		dev_err(&pdev->dev, "Unable to alloc MW buff of size %zu\n",
-			buff_size);
-		return -ENOMEM;
-	}
-
-	/*
-	 * we must ensure that the memory address allocated is BAR size
-	 * aligned in order for the XLAT register to take the value. This
-	 * is a requirement of the hardware. It is recommended to setup CMA
-	 * for BAR sizes equal or greater than 4MB.
-	 */
-	if (!IS_ALIGNED(mw->dma_addr, xlat_align)) {
-		dev_err(&pdev->dev, "DMA memory %pad is not aligned\n",
-			&mw->dma_addr);
-		ntb_free_mw(nt, num_mw);
-		return -ENOMEM;
+	rc = ntb_alloc_mw_buffer(mw, &pdev->dev, xlat_align);
+	if (rc) {
+		mw->alloc_size *= 2;
+		rc = ntb_alloc_mw_buffer(mw, &pdev->dev, xlat_align);
+		if (rc) {
+			dev_err(&pdev->dev,
+				"Unable to alloc aligned MW buff\n");
+			mw->xlat_size = 0;
+			mw->buff_size = 0;
+			mw->alloc_size = 0;
+			return rc;
+		}
 	}
 
 	/* Notify HW the memory location of the receive buffer */
@@ -1278,6 +1318,7 @@ static void ntb_rx_copy_callback(void *data,
 		case DMA_TRANS_READ_FAILED:
 		case DMA_TRANS_WRITE_FAILED:
 			entry->errors++;
+			/* fall through */
 		case DMA_TRANS_ABORTED:
 		{
 			struct ntb_transport_qp *qp = entry->qp;
@@ -1533,6 +1574,7 @@ static void ntb_tx_copy_callback(void *data,
 		case DMA_TRANS_READ_FAILED:
 		case DMA_TRANS_WRITE_FAILED:
 			entry->errors++;
+			/* fall through */
 		case DMA_TRANS_ABORTED:
 		{
 			void __iomem *offset =