qtnfmac_pcie: check for correct CHIP ID at pcie probe

Make sure that wifi device is of supported variant by checking it's CHIP ID
before completing a probe sequence.

Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c

@@ -1090,6 +1090,26 @@ static void qtnf_pearl_reclaim_tasklet_fn(unsigned long data)
 	qtnf_en_txdone_irq(ps);
 }
 
+static int qtnf_pearl_check_chip_id(struct qtnf_pcie_pearl_state *ps)
+{
+	unsigned int chipid;
+
+	chipid = qtnf_chip_id_get(ps->base.sysctl_bar);
+
+	switch (chipid) {
+	case QTN_CHIP_ID_PEARL:
+	case QTN_CHIP_ID_PEARL_B:
+	case QTN_CHIP_ID_PEARL_C:
+		pr_info("chip ID is 0x%x\n", chipid);
+		break;
+	default:
+		pr_err("incorrect chip ID 0x%x\n", chipid);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
 static int qtnf_pcie_pearl_probe(struct pci_dev *pdev,
 				 const struct pci_device_id *id)
 {
@@ -1130,6 +1150,10 @@ static int qtnf_pcie_pearl_probe(struct pci_dev *pdev,
 	qtnf_pcie_init_shm_ipc(&ps->base, &ps->bda->bda_shm_reg1,
 			       &ps->bda->bda_shm_reg2, &ipc_int);
 
+	ret = qtnf_pearl_check_chip_id(ps);
+	if (ret)
+		goto error;
+
 	ret = qtnf_pcie_pearl_init_xfer(ps);
 	if (ret) {
 		pr_err("PCIE xfer init failed\n");

drivers/net/wireless/quantenna/qtnfmac/qtn_hw_ids.h

@@ -25,8 +25,22 @@
 
 #define	PCIE_DEVICE_ID_QTN_PEARL	(0x0008)
 
+#define QTN_REG_SYS_CTRL_CSR		0x14
+#define QTN_CHIP_ID_MASK		0xF0
+#define QTN_CHIP_ID_TOPAZ		0x40
+#define QTN_CHIP_ID_PEARL		0x50
+#define QTN_CHIP_ID_PEARL_B		0x60
+#define QTN_CHIP_ID_PEARL_C		0x70
+
 /* FW names */
 
 #define QTN_PCI_PEARL_FW_NAME		"qtn/fmac_qsr10g.img"
 
+static inline unsigned int qtnf_chip_id_get(const void __iomem *regs_base)
+{
+	u32 board_rev = readl(regs_base + QTN_REG_SYS_CTRL_CSR);
+
+	return board_rev & QTN_CHIP_ID_MASK;
+}
+
 #endif	/* _QTN_HW_IDS_H_ */