wil6210: support AP isolation

For the AP, configuration may say not to bridge traffic between
wireless clients. This is conveyed from user space (ex: hostapd has
ap_isolate parameter) with NL80211_CMD_SET_BSS, to the driver's
cfg80211 ops method change_bss

Add support for this setting.

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/ath/wil6210/cfg80211.c

@@ -917,6 +917,21 @@ static int wil_cfg80211_probe_client(struct wiphy *wiphy,
 	return 0;
 }
 
+static int wil_cfg80211_change_bss(struct wiphy *wiphy,
+				   struct net_device *dev,
+				   struct bss_parameters *params)
+{
+	struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+
+	if (params->ap_isolate >= 0) {
+		wil_dbg_misc(wil, "%s(ap_isolate %d => %d)\n", __func__,
+			     wil->ap_isolate, params->ap_isolate);
+		wil->ap_isolate = params->ap_isolate;
+	}
+
+	return 0;
+}
+
 static struct cfg80211_ops wil_cfg80211_ops = {
 	.scan = wil_cfg80211_scan,
 	.connect = wil_cfg80211_connect,
@@ -937,6 +952,7 @@ static struct cfg80211_ops wil_cfg80211_ops = {
 	.stop_ap = wil_cfg80211_stop_ap,
 	.del_station = wil_cfg80211_del_station,
 	.probe_client = wil_cfg80211_probe_client,
+	.change_bss = wil_cfg80211_change_bss,
 };
 
 static void wil_wiphy_init(struct wiphy *wiphy)

drivers/net/wireless/ath/wil6210/debugfs.c

@@ -1405,6 +1405,7 @@ static const struct dbg_off dbg_wil_off[] = {
 	WIL_FIELD(fw_version,	S_IRUGO,		doff_u32),
 	WIL_FIELD(hw_version,	S_IRUGO,		doff_x32),
 	WIL_FIELD(recovery_count, S_IRUGO,		doff_u32),
+	WIL_FIELD(ap_isolate,	S_IRUGO,		doff_u32),
 	{},
 };
 

drivers/net/wireless/ath/wil6210/main.c

@@ -714,6 +714,7 @@ int wil_reset(struct wil6210_priv *wil, bool load_fw)
 
 	/* init after reset */
 	wil->pending_connect_cid = -1;
+	wil->ap_isolate = 0;
 	reinit_completion(&wil->wmi_ready);
 	reinit_completion(&wil->wmi_call);
 

drivers/net/wireless/ath/wil6210/txrx.c

@@ -515,7 +515,7 @@ void wil_netif_rx_any(struct sk_buff *skb, struct net_device *ndev)
 
 	skb_orphan(skb);
 
-	if (wdev->iftype == NL80211_IFTYPE_AP) {
+	if (wdev->iftype == NL80211_IFTYPE_AP && !wil->ap_isolate) {
 		if (mcast) {
 			/* send multicast frames both to higher layers in
 			 * local net stack and back to the wireless medium

drivers/net/wireless/ath/wil6210/wil6210.h

@@ -542,6 +542,7 @@ struct wil6210_priv {
 	u32 monitor_flags;
 	u32 privacy; /* secure connection? */
 	int sinfo_gen;
+	u32 ap_isolate; /* no intra-BSS communication */
 	/* interrupt moderation */
 	u32 tx_max_burst_duration;
 	u32 tx_interframe_timeout;