regulator: bd9571mwv: Use "backup_mode" sysfs file instead of "wake_up"

Currently the BD9571MWV PMIC driver uses the standard "wake_up" sysfs
file to control enablement of DDR Backup Mode.

However, configuring DDR Backup Mode is not really equivalent to
configuring the PMIC as a wake-up source.  To avoid confusion, use a
custom "backup_mode" attribute file in sysfs instead.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Mark Brown <broonie@kernel.org>

drivers/regulator/bd9571mwv-regulator.c

@@ -30,6 +30,7 @@ struct bd9571mwv_reg {
 	/* DDR Backup Power */
 	u8 bkup_mode_cnt_keepon;	/* from "rohm,ddr-backup-power" */
 	u8 bkup_mode_cnt_saved;
+	bool bkup_mode_enabled;
 
 	/* Power switch type */
 	bool rstbmode_level;
@@ -171,13 +172,40 @@ static int bd9571mwv_bkup_mode_write(struct bd9571mwv *bd, unsigned int mode)
 	return 0;
 }
 
+static ssize_t backup_mode_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct bd9571mwv_reg *bdreg = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%s\n", bdreg->bkup_mode_enabled ? "on" : "off");
+}
+
+static ssize_t backup_mode_store(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf, size_t count)
+{
+	struct bd9571mwv_reg *bdreg = dev_get_drvdata(dev);
+	int ret;
+
+	if (!count)
+		return 0;
+
+	ret = kstrtobool(buf, &bdreg->bkup_mode_enabled);
+	if (ret)
+		return ret;
+
+	return count;
+}
+
+DEVICE_ATTR_RW(backup_mode);
+
 static int bd9571mwv_suspend(struct device *dev)
 {
 	struct bd9571mwv_reg *bdreg = dev_get_drvdata(dev);
 	unsigned int mode;
 	int ret;
 
-	if (!device_may_wakeup(dev))
+	if (!bdreg->bkup_mode_enabled)
 		return 0;
 
 	/* Save DDR Backup Mode */
@@ -204,7 +232,7 @@ static int bd9571mwv_resume(struct device *dev)
 {
 	struct bd9571mwv_reg *bdreg = dev_get_drvdata(dev);
 
-	if (!device_may_wakeup(dev))
+	if (!bdreg->bkup_mode_enabled)
 		return 0;
 
 	/* Restore DDR Backup Mode */
@@ -215,9 +243,15 @@ static const struct dev_pm_ops bd9571mwv_pm  = {
 	SET_SYSTEM_SLEEP_PM_OPS(bd9571mwv_suspend, bd9571mwv_resume)
 };
 
+static int bd9571mwv_regulator_remove(struct platform_device *pdev)
+{
+	device_remove_file(&pdev->dev, &dev_attr_backup_mode);
+	return 0;
+}
 #define DEV_PM_OPS	&bd9571mwv_pm
 #else
 #define DEV_PM_OPS	NULL
+#define bd9571mwv_regulator_remove	NULL
 #endif /* CONFIG_PM_SLEEP */
 
 static int bd9571mwv_regulator_probe(struct platform_device *pdev)
@@ -270,14 +304,21 @@ static int bd9571mwv_regulator_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
+#ifdef CONFIG_PM_SLEEP
 	if (bdreg->bkup_mode_cnt_keepon) {
-		device_set_wakeup_capable(&pdev->dev, true);
+		int ret;
+
 		/*
-		 * Wakeup is enabled by default in pulse mode, but needs
+		 * Backup mode is enabled by default in pulse mode, but needs
 		 * explicit user setup in level mode.
 		 */
-		device_set_wakeup_enable(&pdev->dev, bdreg->rstbmode_pulse);
+		bdreg->bkup_mode_enabled = bdreg->rstbmode_pulse;
+
+		ret = device_create_file(&pdev->dev, &dev_attr_backup_mode);
+		if (ret)
+			return ret;
 	}
+#endif /* CONFIG_PM_SLEEP */
 
 	return 0;
 }
@@ -294,6 +335,7 @@ static struct platform_driver bd9571mwv_regulator_driver = {
 		.pm = DEV_PM_OPS,
 	},
 	.probe = bd9571mwv_regulator_probe,
+	.remove = bd9571mwv_regulator_remove,
 	.id_table = bd9571mwv_regulator_id_table,
 };
 module_platform_driver(bd9571mwv_regulator_driver);