|
@@ -0,0 +1,54 @@
|
|
|
|
+Microchip LAN78xx Gigabit Ethernet controller
|
|
|
|
+
|
|
|
|
+The LAN78XX devices are usually configured by programming their OTP or with
|
|
|
|
+an external EEPROM, but some platforms (e.g. Raspberry Pi 3 B+) have neither.
|
|
|
|
+The Device Tree properties, if present, override the OTP and EEPROM.
|
|
|
|
+
|
|
|
|
+Required properties:
|
|
|
|
+- compatible: Should be one of "usb424,7800", "usb424,7801" or "usb424,7850".
|
|
|
|
+
|
|
|
|
+Optional properties:
|
|
|
|
+- local-mac-address: see ethernet.txt
|
|
|
|
+- mac-address: see ethernet.txt
|
|
|
|
+
|
|
|
|
+Optional properties of the embedded PHY:
|
|
|
|
+- microchip,led-modes: a 0..4 element vector, with each element configuring
|
|
|
|
+ the operating mode of an LED. Omitted LEDs are turned off. Allowed values
|
|
|
|
+ are defined in "include/dt-bindings/net/microchip-lan78xx.h".
|
|
|
|
+
|
|
|
|
+Example:
|
|
|
|
+
|
|
|
|
+/* Based on the configuration for a Raspberry Pi 3 B+ */
|
|
|
|
+&usb {
|
|
|
|
+ usb-port@1 {
|
|
|
|
+ compatible = "usb424,2514";
|
|
|
|
+ reg = <1>;
|
|
|
|
+ #address-cells = <1>;
|
|
|
|
+ #size-cells = <0>;
|
|
|
|
+
|
|
|
|
+ usb-port@1 {
|
|
|
|
+ compatible = "usb424,2514";
|
|
|
|
+ reg = <1>;
|
|
|
|
+ #address-cells = <1>;
|
|
|
|
+ #size-cells = <0>;
|
|
|
|
+
|
|
|
|
+ ethernet: ethernet@1 {
|
|
|
|
+ compatible = "usb424,7800";
|
|
|
|
+ reg = <1>;
|
|
|
|
+ local-mac-address = [ 00 11 22 33 44 55 ];
|
|
|
|
+
|
|
|
|
+ mdio {
|
|
|
|
+ #address-cells = <0x1>;
|
|
|
|
+ #size-cells = <0x0>;
|
|
|
|
+ eth_phy: ethernet-phy@1 {
|
|
|
|
+ reg = <1>;
|
|
|
|
+ microchip,led-modes = <
|
|
|
|
+ LAN78XX_LINK_1000_ACTIVITY
|
|
|
|
+ LAN78XX_LINK_10_100_ACTIVITY
|
|
|
|
+ >;
|
|
|
|
+ };
|
|
|
|
+ };
|
|
|
|
+ };
|
|
|
|
+ };
|
|
|
|
+ };
|
|
|
|
+};
|