Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Arnd Bergmann:
 "Here are a couple of bugfixes for v4.8-rc.

  Most of them have actually been around for a while this time but for
  some reason didn't get applied early on.  The shmobile regulator fix
  is the only one that isn't completely obvious.

  Device tree changes:
   - archtimer interrupts must be level triggered (multiple platforms)
   - fix for USB and MMC clocks on STiH410
   - fix split DT repository in case of raspberry-pi 3
   - a new use of skeleton.dtsi on arm64 has crept in after that was
     removed.

  defconfig updates:
   - xilinx vdma has a new Kconfig symbol name
   - keystone requires CONFIG_NOP_USB_XCEIV since v4.8-rc1

  Code fixes:
   - fix regulator quirk on shmobile
   - suspend-to-ram regression on EXYNOS

  Maintainer updates:
   - Javier Martinez Canillas is now a reviewer for Samsung EXYNOS"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: keystone: defconfig: Fix USB configuration
  arm64: dts: Fix broken architected timer interrupt trigger
  ARM: multi_v7_defconfig: update XILINX_VDMA
  ARM64: dts: bcm: Use a symlink to R-Pi dtsi files from arch=arm
  ARM: dts: Remove use of skeleton.dtsi from bcm283x.dtsi
  ARM: dts: STiH407-family: Provide interconnect clock for consumption in ST SDHCI
  ARM: dts: STiH410: Handle interconnect clock required by EHCI/OHCI (USB)
  ARM: shmobile: fix regulator quirk for Gen2
  ARM: EXYNOS: Clear OF_POPULATED flag from PMU node in IRQ init callback
  MAINTAINERS: Add myself as reviewer for Samsung Exynos support

MAINTAINERS

@@ -1625,6 +1625,7 @@ N:	rockchip
 ARM/SAMSUNG EXYNOS ARM ARCHITECTURES
 M:	Kukjin Kim <kgene@kernel.org>
 M:	Krzysztof Kozlowski <krzk@kernel.org>
+R:	Javier Martinez Canillas <javier@osg.samsung.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
 S:	Maintained

arch/arm/boot/dts/bcm2835-rpi.dtsi

@@ -2,6 +2,7 @@
 
 / {
 	memory {
+		device_type = "memory";
 		reg = <0 0x10000000>;
 	};
 

arch/arm/boot/dts/bcm283x.dtsi

@@ -2,7 +2,6 @@
 #include <dt-bindings/clock/bcm2835.h>
 #include <dt-bindings/clock/bcm2835-aux.h>
 #include <dt-bindings/gpio/gpio.h>
-#include "skeleton.dtsi"
 
 /* This include file covers the common peripherals and configuration between
  * bcm2835 and bcm2836 implementations, leaving the CPU configuration to
@@ -13,6 +12,8 @@
 	compatible = "brcm,bcm2835";
 	model = "BCM2835";
 	interrupt-parent = <&intc>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	chosen {
 		bootargs = "earlyprintk console=ttyAMA0";

arch/arm/boot/dts/stih407-family.dtsi

@@ -550,8 +550,9 @@
 			interrupt-names = "mmcirq";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_mmc0>;
-			clock-names = "mmc";
-			clocks = <&clk_s_c0_flexgen CLK_MMC_0>;
+			clock-names = "mmc", "icn";
+			clocks = <&clk_s_c0_flexgen CLK_MMC_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_HVA>;
 			bus-width = <8>;
 			non-removable;
 		};
@@ -565,8 +566,9 @@
 			interrupt-names = "mmcirq";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_sd1>;
-			clock-names = "mmc";
-			clocks = <&clk_s_c0_flexgen CLK_MMC_1>;
+			clock-names = "mmc", "icn";
+			clocks = <&clk_s_c0_flexgen CLK_MMC_1>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_HVA>;
 			resets = <&softreset STIH407_MMC1_SOFTRESET>;
 			bus-width = <4>;
 		};

arch/arm/boot/dts/stih410.dtsi

@@ -41,7 +41,8 @@
 			compatible = "st,st-ohci-300x";
 			reg = <0x9a03c00 0x100>;
 			interrupts = <GIC_SPI 180 IRQ_TYPE_NONE>;
-			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
 			resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
 				 <&softreset STIH407_USB2_PORT0_SOFTRESET>;
 			reset-names = "power", "softreset";
@@ -57,7 +58,8 @@
 			interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb0>;
-			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
 			resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
 				 <&softreset STIH407_USB2_PORT0_SOFTRESET>;
 			reset-names = "power", "softreset";
@@ -71,7 +73,8 @@
 			compatible = "st,st-ohci-300x";
 			reg = <0x9a83c00 0x100>;
 			interrupts = <GIC_SPI 181 IRQ_TYPE_NONE>;
-			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
 			resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
 				 <&softreset STIH407_USB2_PORT1_SOFTRESET>;
 			reset-names = "power", "softreset";
@@ -87,7 +90,8 @@
 			interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb1>;
-			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
 			resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
 				 <&softreset STIH407_USB2_PORT1_SOFTRESET>;
 			reset-names = "power", "softreset";

arch/arm/configs/keystone_defconfig

@@ -161,6 +161,7 @@ CONFIG_USB_MON=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_DWC3=y
+CONFIG_NOP_USB_XCEIV=y
 CONFIG_KEYSTONE_USB_PHY=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y

arch/arm/configs/multi_v7_defconfig

@@ -781,7 +781,7 @@ CONFIG_MXS_DMA=y
 CONFIG_DMA_BCM2835=y
 CONFIG_DMA_OMAP=y
 CONFIG_QCOM_BAM_DMA=y
-CONFIG_XILINX_VDMA=y
+CONFIG_XILINX_DMA=y
 CONFIG_DMA_SUN6I=y
 CONFIG_STAGING=y
 CONFIG_SENSORS_ISL29018=y

arch/arm/mach-exynos/suspend.c

@@ -255,6 +255,12 @@ static int __init exynos_pmu_irq_init(struct device_node *node,
 		return -ENOMEM;
 	}
 
+	/*
+	 * Clear the OF_POPULATED flag set in of_irq_init so that
+	 * later the Exynos PMU platform device won't be skipped.
+	 */
+	of_node_clear_flag(node, OF_POPULATED);
+
 	return 0;
 }
 

arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c

@@ -41,39 +41,26 @@
 
 #define REGULATOR_IRQ_MASK	BIT(2)	/* IRQ2, active low */
 
-static void __iomem *irqc;
-
-static const u8 da9063_mask_regs[] = {
-	DA9063_REG_IRQ_MASK_A,
-	DA9063_REG_IRQ_MASK_B,
-	DA9063_REG_IRQ_MASK_C,
-	DA9063_REG_IRQ_MASK_D,
-};
-
-/* DA9210 System Control and Event Registers */
+/* start of DA9210 System Control and Event Registers */
 #define DA9210_REG_MASK_A		0x54
-#define DA9210_REG_MASK_B		0x55
-
-static const u8 da9210_mask_regs[] = {
-	DA9210_REG_MASK_A,
-	DA9210_REG_MASK_B,
-};
-
-static void da9xxx_mask_irqs(struct i2c_client *client, const u8 regs[],
-			     unsigned int nregs)
-{
-	unsigned int i;
 
-	dev_info(&client->dev, "Masking %s interrupt sources\n", client->name);
+static void __iomem *irqc;
 
-	for (i = 0; i < nregs; i++) {
-		int error = i2c_smbus_write_byte_data(client, regs[i], ~0);
-		if (error) {
-			dev_err(&client->dev, "i2c error %d\n", error);
-			return;
-		}
-	}
-}
+/* first byte sets the memory pointer, following are consecutive reg values */
+static u8 da9063_irq_clr[] = { DA9063_REG_IRQ_MASK_A, 0xff, 0xff, 0xff, 0xff };
+static u8 da9210_irq_clr[] = { DA9210_REG_MASK_A, 0xff, 0xff };
+
+static struct i2c_msg da9xxx_msgs[2] = {
+	{
+		.addr = 0x58,
+		.len = ARRAY_SIZE(da9063_irq_clr),
+		.buf = da9063_irq_clr,
+	}, {
+		.addr = 0x68,
+		.len = ARRAY_SIZE(da9210_irq_clr),
+		.buf = da9210_irq_clr,
+	},
+};
 
 static int regulator_quirk_notify(struct notifier_block *nb,
 				  unsigned long action, void *data)
@@ -93,12 +80,15 @@ static int regulator_quirk_notify(struct notifier_block *nb,
 	client = to_i2c_client(dev);
 	dev_dbg(dev, "Detected %s\n", client->name);
 
-	if ((client->addr == 0x58 && !strcmp(client->name, "da9063")))
-		da9xxx_mask_irqs(client, da9063_mask_regs,
-				 ARRAY_SIZE(da9063_mask_regs));
-	else if (client->addr == 0x68 && !strcmp(client->name, "da9210"))
-		da9xxx_mask_irqs(client, da9210_mask_regs,
-				 ARRAY_SIZE(da9210_mask_regs));
+	if ((client->addr == 0x58 && !strcmp(client->name, "da9063")) ||
+	    (client->addr == 0x68 && !strcmp(client->name, "da9210"))) {
+		int ret;
+
+		dev_info(&client->dev, "clearing da9063/da9210 interrupts\n");
+		ret = i2c_transfer(client->adapter, da9xxx_msgs, ARRAY_SIZE(da9xxx_msgs));
+		if (ret != ARRAY_SIZE(da9xxx_msgs))
+			dev_err(&client->dev, "i2c error %d\n", ret);
+	}
 
 	mon = ioread32(irqc + IRQC_MONITOR);
 	if (mon & REGULATOR_IRQ_MASK)

arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi

@@ -255,10 +255,10 @@
 		/* Local timer */
 		timer {
 			compatible = "arm,armv8-timer";
-			interrupts = <1 13 0xf01>,
-				     <1 14 0xf01>,
-				     <1 11 0xf01>,
-				     <1 10 0xf01>;
+			interrupts = <1 13 0xf08>,
+				     <1 14 0xf08>,
+				     <1 11 0xf08>,
+				     <1 10 0xf08>;
 		};
 
 		timer0: timer0@ffc03000 {

arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi

@@ -102,13 +102,13 @@
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13
-			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>,
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 14
-			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>,
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 11
-			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>,
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 10
-			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>;
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
 	xtal: xtal-clk {

arch/arm64/boot/dts/apm/apm-storm.dtsi

@@ -110,10 +110,10 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <1 0 0xff01>,	/* Secure Phys IRQ */
-			     <1 13 0xff01>,	/* Non-secure Phys IRQ */
-			     <1 14 0xff01>,	/* Virt IRQ */
-			     <1 15 0xff01>;	/* Hyp IRQ */
+		interrupts = <1 0 0xff08>,	/* Secure Phys IRQ */
+			     <1 13 0xff08>,	/* Non-secure Phys IRQ */
+			     <1 14 0xff08>,	/* Virt IRQ */
+			     <1 15 0xff08>;	/* Hyp IRQ */
 		clock-frequency = <50000000>;
 	};
 

arch/arm64/boot/dts/broadcom/bcm2835-rpi.dtsi

@@ -0,0 +1 @@
+../../../../arm/boot/dts/bcm2835-rpi.dtsi

arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts

@@ -1,7 +1,7 @@
 /dts-v1/;
 #include "bcm2837.dtsi"
-#include "../../../../arm/boot/dts/bcm2835-rpi.dtsi"
-#include "../../../../arm/boot/dts/bcm283x-rpi-smsc9514.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-smsc9514.dtsi"
 
 / {
 	compatible = "raspberrypi,3-model-b", "brcm,bcm2837";

arch/arm64/boot/dts/broadcom/bcm2837.dtsi

@@ -1,4 +1,4 @@
-#include "../../../../arm/boot/dts/bcm283x.dtsi"
+#include "bcm283x.dtsi"
 
 / {
 	compatible = "brcm,bcm2836";

arch/arm64/boot/dts/broadcom/bcm283x-rpi-smsc9514.dtsi

@@ -0,0 +1 @@
+../../../../arm/boot/dts/bcm283x-rpi-smsc9514.dtsi

arch/arm64/boot/dts/broadcom/bcm283x.dtsi

@@ -0,0 +1 @@
+../../../../arm/boot/dts/bcm283x.dtsi

arch/arm64/boot/dts/broadcom/ns2.dtsi

@@ -88,13 +88,13 @@
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0xff) |
-			      IRQ_TYPE_EDGE_RISING)>,
+			      IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(0xff) |
-			      IRQ_TYPE_EDGE_RISING)>,
+			      IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(0xff) |
-			      IRQ_TYPE_EDGE_RISING)>,
+			      IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(0xff) |
-			      IRQ_TYPE_EDGE_RISING)>;
+			      IRQ_TYPE_LEVEL_LOW)>;
 	};
 
 	pmu {

arch/arm64/boot/dts/cavium/thunder-88xx.dtsi

@@ -354,10 +354,10 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <1 13 0xff01>,
-		             <1 14 0xff01>,
-		             <1 11 0xff01>,
-		             <1 10 0xff01>;
+		interrupts = <1 13 4>,
+		             <1 14 4>,
+		             <1 11 4>,
+		             <1 10 4>;
 	};
 
 	pmu {

arch/arm64/boot/dts/exynos/exynos7.dtsi

@@ -473,10 +473,10 @@
 
 		timer {
 			compatible = "arm,armv8-timer";
-			interrupts = <1 13 0xff01>,
-				     <1 14 0xff01>,
-				     <1 11 0xff01>,
-				     <1 10 0xff01>;
+			interrupts = <1 13 0xff08>,
+				     <1 14 0xff08>,
+				     <1 11 0xff08>,
+				     <1 10 0xff08>;
 		};
 
 		pmu_system_controller: system-controller@105c0000 {

arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi

@@ -119,10 +119,10 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <1 13 0x1>, /* Physical Secure PPI */
-			     <1 14 0x1>, /* Physical Non-Secure PPI */
-			     <1 11 0x1>, /* Virtual PPI */
-			     <1 10 0x1>; /* Hypervisor PPI */
+		interrupts = <1 13 0xf08>, /* Physical Secure PPI */
+			     <1 14 0xf08>, /* Physical Non-Secure PPI */
+			     <1 11 0xf08>, /* Virtual PPI */
+			     <1 10 0xf08>; /* Hypervisor PPI */
 	};
 
 	pmu {

arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi

@@ -191,10 +191,10 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */
-			     <1 14 0x8>, /* Physical Non-Secure PPI, active-low */
-			     <1 11 0x8>, /* Virtual PPI, active-low */
-			     <1 10 0x8>; /* Hypervisor PPI, active-low */
+		interrupts = <1 13 4>, /* Physical Secure PPI, active-low */
+			     <1 14 4>, /* Physical Non-Secure PPI, active-low */
+			     <1 11 4>, /* Virtual PPI, active-low */
+			     <1 10 4>; /* Hypervisor PPI, active-low */
 	};
 
 	pmu {

arch/arm64/boot/dts/marvell/armada-ap806.dtsi

@@ -122,10 +122,10 @@
 
 			timer {
 				compatible = "arm,armv8-timer";
-				interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>,
-					     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>,
-					     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>,
-					     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+				interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+					     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+					     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+					     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 			};
 
 			odmi: odmi@300000 {

arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi

@@ -129,10 +129,10 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <1 13 0xf01>,
-			     <1 14 0xf01>,
-			     <1 11 0xf01>,
-			     <1 10 0xf01>;
+		interrupts = <1 13 4>,
+			     <1 14 4>,
+			     <1 11 4>,
+			     <1 10 4>;
 	};
 
 	soc {

arch/arm64/boot/dts/xilinx/zynqmp.dtsi

@@ -65,10 +65,10 @@
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupt-parent = <&gic>;
-		interrupts = <1 13 0xf01>,
-			     <1 14 0xf01>,
-			     <1 11 0xf01>,
-			     <1 10 0xf01>;
+		interrupts = <1 13 0xf08>,
+			     <1 14 0xf08>,
+			     <1 11 0xf08>,
+			     <1 10 0xf08>;
 	};
 
 	amba_apu {