Merge branch 'x86/cpufeature' into x86/urgent, because it's ready

Signed-off-by: Ingo Molnar <mingo@kernel.org>

arch/x86/include/asm/cpufeature.h

@@ -239,6 +239,7 @@
 #define X86_FEATURE_AVX512PF	( 9*32+26) /* AVX-512 Prefetch */
 #define X86_FEATURE_AVX512ER	( 9*32+27) /* AVX-512 Exponential and Reciprocal */
 #define X86_FEATURE_AVX512CD	( 9*32+28) /* AVX-512 Conflict Detection */
+#define X86_FEATURE_SHA_NI	( 9*32+29) /* SHA1/SHA256 Instruction Extensions */
 
 /* Extended state features, CPUID level 0x0000000d:1 (eax), word 10 */
 #define X86_FEATURE_XSAVEOPT	(10*32+ 0) /* XSAVEOPT */

drivers/ata/ahci_brcmstb.c

@@ -92,7 +92,7 @@ static inline u32 brcm_sata_readreg(void __iomem *addr)
 	 * Other architectures (e.g., ARM) either do not support big endian, or
 	 * else leave I/O in little endian mode.
 	 */
-	if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(__BIG_ENDIAN))
+	if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
 		return __raw_readl(addr);
 	else
 		return readl_relaxed(addr);
@@ -101,7 +101,7 @@ static inline u32 brcm_sata_readreg(void __iomem *addr)
 static inline void brcm_sata_writereg(u32 val, void __iomem *addr)
 {
 	/* See brcm_sata_readreg() comments */
-	if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(__BIG_ENDIAN))
+	if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
 		__raw_writel(val, addr);
 	else
 		writel_relaxed(val, addr);
@@ -209,6 +209,7 @@ static void brcm_sata_init(struct brcm_ahci_priv *priv)
 			   priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL);
 }
 
+#ifdef CONFIG_PM_SLEEP
 static int brcm_ahci_suspend(struct device *dev)
 {
 	struct ata_host *host = dev_get_drvdata(dev);
@@ -231,6 +232,7 @@ static int brcm_ahci_resume(struct device *dev)
 	brcm_sata_phys_enable(priv);
 	return ahci_platform_resume(dev);
 }
+#endif
 
 static struct scsi_host_template ahci_platform_sht = {
 	AHCI_SHT(DRV_NAME),

drivers/ata/libata-core.c

@@ -694,11 +694,11 @@ static int ata_rwcmd_protocol(struct ata_taskfile *tf, struct ata_device *dev)
  *	RETURNS:
  *	Block address read from @tf.
  */
-u64 ata_tf_read_block(const struct ata_taskfile *tf, struct ata_device *dev)
+u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev)
 {
 	u64 block = 0;
 
-	if (!dev || tf->flags & ATA_TFLAG_LBA) {
+	if (tf->flags & ATA_TFLAG_LBA) {
 		if (tf->flags & ATA_TFLAG_LBA48) {
 			block |= (u64)tf->hob_lbah << 40;
 			block |= (u64)tf->hob_lbam << 32;
@@ -2147,24 +2147,6 @@ static int ata_dev_config_ncq(struct ata_device *dev,
 	return 0;
 }
 
-static void ata_dev_config_sense_reporting(struct ata_device *dev)
-{
-	unsigned int err_mask;
-
-	if (!ata_id_has_sense_reporting(dev->id))
-		return;
-
-	if (ata_id_sense_reporting_enabled(dev->id))
-		return;
-
-	err_mask = ata_dev_set_feature(dev, SETFEATURE_SENSE_DATA, 0x1);
-	if (err_mask) {
-		ata_dev_dbg(dev,
-			    "failed to enable Sense Data Reporting, Emask 0x%x\n",
-			    err_mask);
-	}
-}
-
 /**
  *	ata_dev_configure - Configure the specified ATA/ATAPI device
  *	@dev: Target device to configure
@@ -2387,7 +2369,7 @@ int ata_dev_configure(struct ata_device *dev)
 					dev->devslp_timing[i] = sata_setting[j];
 				}
 		}
-		ata_dev_config_sense_reporting(dev);
+
 		dev->cdb_len = 16;
 	}
 

drivers/ata/libata-eh.c

@@ -1592,8 +1592,6 @@ static int ata_eh_read_log_10h(struct ata_device *dev,
 	tf->hob_lbah = buf[10];
 	tf->nsect = buf[12];
 	tf->hob_nsect = buf[13];
-	if (ata_id_has_ncq_autosense(dev->id))
-		tf->auxiliary = buf[14] << 16 | buf[15] << 8 | buf[16];
 
 	return 0;
 }
@@ -1629,70 +1627,6 @@ unsigned int atapi_eh_tur(struct ata_device *dev, u8 *r_sense_key)
 	return err_mask;
 }
 
-/**
- *	ata_eh_request_sense - perform REQUEST_SENSE_DATA_EXT
- *	@dev: device to perform REQUEST_SENSE_SENSE_DATA_EXT to
- *	@sense_buf: result sense data buffer (SCSI_SENSE_BUFFERSIZE bytes long)
- *	@dfl_sense_key: default sense key to use
- *
- *	Perform REQUEST_SENSE_DATA_EXT after the device reported CHECK
- *	SENSE.  This function is EH helper.
- *
- *	LOCKING:
- *	Kernel thread context (may sleep).
- *
- *	RETURNS:
- *	encoded sense data on success, 0 on failure or if sense data
- *	is not available.
- */
-static u32 ata_eh_request_sense(struct ata_queued_cmd *qc,
-				struct scsi_cmnd *cmd)
-{
-	struct ata_device *dev = qc->dev;
-	struct ata_taskfile tf;
-	unsigned int err_mask;
-
-	if (!cmd)
-		return 0;
-
-	DPRINTK("ATA request sense\n");
-	ata_dev_warn(dev, "request sense\n");
-	if (!ata_id_sense_reporting_enabled(dev->id)) {
-		ata_dev_warn(qc->dev, "sense data reporting disabled\n");
-		return 0;
-	}
-	ata_tf_init(dev, &tf);
-
-	tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
-	tf.flags |= ATA_TFLAG_LBA | ATA_TFLAG_LBA48;
-	tf.command = ATA_CMD_REQ_SENSE_DATA;
-	tf.protocol = ATA_PROT_NODATA;
-
-	err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
-	/*
-	 * ACS-4 states:
-	 * The device may set the SENSE DATA AVAILABLE bit to one in the
-	 * STATUS field and clear the ERROR bit to zero in the STATUS field
-	 * to indicate that the command returned completion without an error
-	 * and the sense data described in table 306 is available.
-	 *
-	 * IOW the 'ATA_SENSE' bit might not be set even though valid
-	 * sense data is available.
-	 * So check for both.
-	 */
-	if ((tf.command & ATA_SENSE) ||
-		tf.lbah != 0 || tf.lbam != 0 || tf.lbal != 0) {
-		ata_scsi_set_sense(cmd, tf.lbah, tf.lbam, tf.lbal);
-		qc->flags |= ATA_QCFLAG_SENSE_VALID;
-		ata_dev_warn(dev, "sense data %02x/%02x/%02x\n",
-			     tf.lbah, tf.lbam, tf.lbal);
-	} else {
-		ata_dev_warn(dev, "request sense failed stat %02x emask %x\n",
-			     tf.command, err_mask);
-	}
-	return err_mask;
-}
-
 /**
  *	atapi_eh_request_sense - perform ATAPI REQUEST_SENSE
  *	@dev: device to perform REQUEST_SENSE to
@@ -1855,19 +1789,6 @@ void ata_eh_analyze_ncq_error(struct ata_link *link)
 	memcpy(&qc->result_tf, &tf, sizeof(tf));
 	qc->result_tf.flags = ATA_TFLAG_ISADDR | ATA_TFLAG_LBA | ATA_TFLAG_LBA48;
 	qc->err_mask |= AC_ERR_DEV | AC_ERR_NCQ;
-	if (qc->result_tf.auxiliary) {
-		char sense_key, asc, ascq;
-
-		sense_key = (qc->result_tf.auxiliary >> 16) & 0xff;
-		asc = (qc->result_tf.auxiliary >> 8) & 0xff;
-		ascq = qc->result_tf.auxiliary & 0xff;
-		ata_dev_dbg(dev, "NCQ Autosense %02x/%02x/%02x\n",
-			    sense_key, asc, ascq);
-		ata_scsi_set_sense(qc->scsicmd, sense_key, asc, ascq);
-		ata_scsi_set_sense_information(qc->scsicmd, &qc->result_tf);
-		qc->flags |= ATA_QCFLAG_SENSE_VALID;
-	}
-
 	ehc->i.err_mask &= ~AC_ERR_DEV;
 }
 
@@ -1897,27 +1818,6 @@ static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc,
 		return ATA_EH_RESET;
 	}
 
-	/*
-	 * Sense data reporting does not work if the
-	 * device fault bit is set.
-	 */
-	if ((stat & ATA_SENSE) && !(stat & ATA_DF) &&
-	    !(qc->flags & ATA_QCFLAG_SENSE_VALID)) {
-		if (!(qc->ap->pflags & ATA_PFLAG_FROZEN)) {
-			tmp = ata_eh_request_sense(qc, qc->scsicmd);
-			if (tmp)
-				qc->err_mask |= tmp;
-			else
-				ata_scsi_set_sense_information(qc->scsicmd, tf);
-		} else {
-			ata_dev_warn(qc->dev, "sense data available but port frozen\n");
-		}
-	}
-
-	/* Set by NCQ autosense or request sense above */
-	if (qc->flags & ATA_QCFLAG_SENSE_VALID)
-		return 0;
-
 	if (stat & (ATA_ERR | ATA_DF))
 		qc->err_mask |= AC_ERR_DEV;
 	else
@@ -2661,15 +2561,14 @@ static void ata_eh_link_report(struct ata_link *link)
 
 #ifdef CONFIG_ATA_VERBOSE_ERROR
 		if (res->command & (ATA_BUSY | ATA_DRDY | ATA_DF | ATA_DRQ |
-				    ATA_SENSE | ATA_ERR)) {
+				    ATA_ERR)) {
 			if (res->command & ATA_BUSY)
 				ata_dev_err(qc->dev, "status: { Busy }\n");
 			else
-				ata_dev_err(qc->dev, "status: { %s%s%s%s%s}\n",
+				ata_dev_err(qc->dev, "status: { %s%s%s%s}\n",
 				  res->command & ATA_DRDY ? "DRDY " : "",
 				  res->command & ATA_DF ? "DF " : "",
 				  res->command & ATA_DRQ ? "DRQ " : "",
-				  res->command & ATA_SENSE ? "SENSE " : "",
 				  res->command & ATA_ERR ? "ERR " : "");
 		}
 

drivers/ata/libata-scsi.c

@@ -270,28 +270,13 @@ DEVICE_ATTR(unload_heads, S_IRUGO | S_IWUSR,
 	    ata_scsi_park_show, ata_scsi_park_store);
 EXPORT_SYMBOL_GPL(dev_attr_unload_heads);
 
-void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq)
+static void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq)
 {
-	if (!cmd)
-		return;
-
 	cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
 
 	scsi_build_sense_buffer(0, cmd->sense_buffer, sk, asc, ascq);
 }
 
-void ata_scsi_set_sense_information(struct scsi_cmnd *cmd,
-				    const struct ata_taskfile *tf)
-{
-	u64 information;
-
-	if (!cmd)
-		return;
-
-	information = ata_tf_read_block(tf, NULL);
-	scsi_set_sense_information(cmd->sense_buffer, information);
-}
-
 static ssize_t
 ata_scsi_em_message_store(struct device *dev, struct device_attribute *attr,
 			  const char *buf, size_t count)
@@ -1792,9 +1777,7 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc)
 	    ((cdb[2] & 0x20) || need_sense)) {
 		ata_gen_passthru_sense(qc);
 	} else {
-		if (qc->flags & ATA_QCFLAG_SENSE_VALID) {
-			cmd->result = SAM_STAT_CHECK_CONDITION;
-		} else if (!need_sense) {
+		if (!need_sense) {
 			cmd->result = SAM_STAT_GOOD;
 		} else {
 			/* TODO: decide which descriptor format to use

drivers/ata/libata.h

@@ -67,8 +67,7 @@ extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev, int tag);
 extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
 			   u64 block, u32 n_block, unsigned int tf_flags,
 			   unsigned int tag);
-extern u64 ata_tf_read_block(const struct ata_taskfile *tf,
-			     struct ata_device *dev);
+extern u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev);
 extern unsigned ata_exec_internal(struct ata_device *dev,
 				  struct ata_taskfile *tf, const u8 *cdb,
 				  int dma_dir, void *buf, unsigned int buflen,
@@ -138,9 +137,6 @@ extern int ata_scsi_add_hosts(struct ata_host *host,
 			      struct scsi_host_template *sht);
 extern void ata_scsi_scan_host(struct ata_port *ap, int sync);
 extern int ata_scsi_offline_dev(struct ata_device *dev);
-extern void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq);
-extern void ata_scsi_set_sense_information(struct scsi_cmnd *cmd,
-					   const struct ata_taskfile *tf);
 extern void ata_scsi_media_change_notify(struct ata_device *dev);
 extern void ata_scsi_hotplug(struct work_struct *work);
 extern void ata_schedule_scsi_eh(struct Scsi_Host *shost);

drivers/ata/sata_sx4.c

@@ -1238,8 +1238,12 @@ static unsigned int pdc20621_prog_dimm_global(struct ata_host *host)
 	readl(mmio + PDC_SDRAM_CONTROL);
 
 	/* Turn on for ECC */
-	pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
-			  PDC_DIMM_SPD_TYPE, &spd0);
+	if (!pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
+			       PDC_DIMM_SPD_TYPE, &spd0)) {
+		pr_err("Failed in i2c read: device=%#x, subaddr=%#x\n",
+		       PDC_DIMM0_SPD_DEV_ADDRESS, PDC_DIMM_SPD_TYPE);
+		return 1;
+	}
 	if (spd0 == 0x02) {
 		data |= (0x01 << 16);
 		writel(data, mmio + PDC_SDRAM_CONTROL);
@@ -1380,8 +1384,12 @@ static unsigned int pdc20621_dimm_init(struct ata_host *host)
 
 	/* ECC initiliazation. */
 
-	pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
-			  PDC_DIMM_SPD_TYPE, &spd0);
+	if (!pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
+			       PDC_DIMM_SPD_TYPE, &spd0)) {
+		pr_err("Failed in i2c read: device=%#x, subaddr=%#x\n",
+		       PDC_DIMM0_SPD_DEV_ADDRESS, PDC_DIMM_SPD_TYPE);
+		return 1;
+	}
 	if (spd0 == 0x02) {
 		void *buf;
 		VPRINTK("Start ECC initialization\n");

drivers/dma/dmaengine.c

@@ -689,6 +689,10 @@ struct dma_chan *dma_request_slave_channel(struct device *dev,
 	struct dma_chan *ch = dma_request_slave_channel_reason(dev, name);
 	if (IS_ERR(ch))
 		return NULL;
+
+	dma_cap_set(DMA_PRIVATE, ch->device->cap_mask);
+	ch->device->privatecnt++;
+
 	return ch;
 }
 EXPORT_SYMBOL_GPL(dma_request_slave_channel);

drivers/gpu/drm/drm_dp_mst_topology.c

@@ -873,9 +873,10 @@ static void drm_dp_destroy_port(struct kref *kref)
 		   from an EDID retrieval */
 		if (port->connector) {
 			mutex_lock(&mgr->destroy_connector_lock);
-			list_add(&port->connector->destroy_list, &mgr->destroy_connector_list);
+			list_add(&port->next, &mgr->destroy_connector_list);
 			mutex_unlock(&mgr->destroy_connector_lock);
 			schedule_work(&mgr->destroy_connector_work);
+			return;
 		}
 		drm_dp_port_teardown_pdt(port, port->pdt);
 
@@ -2659,7 +2660,7 @@ static void drm_dp_tx_work(struct work_struct *work)
 static void drm_dp_destroy_connector_work(struct work_struct *work)
 {
 	struct drm_dp_mst_topology_mgr *mgr = container_of(work, struct drm_dp_mst_topology_mgr, destroy_connector_work);
-	struct drm_connector *connector;
+	struct drm_dp_mst_port *port;
 
 	/*
 	 * Not a regular list traverse as we have to drop the destroy
@@ -2668,15 +2669,21 @@ static void drm_dp_destroy_connector_work(struct work_struct *work)
 	 */
 	for (;;) {
 		mutex_lock(&mgr->destroy_connector_lock);
-		connector = list_first_entry_or_null(&mgr->destroy_connector_list, struct drm_connector, destroy_list);
-		if (!connector) {
+		port = list_first_entry_or_null(&mgr->destroy_connector_list, struct drm_dp_mst_port, next);
+		if (!port) {
 			mutex_unlock(&mgr->destroy_connector_lock);
 			break;
 		}
-		list_del(&connector->destroy_list);
+		list_del(&port->next);
 		mutex_unlock(&mgr->destroy_connector_lock);
 
-		mgr->cbs->destroy_connector(mgr, connector);
+		mgr->cbs->destroy_connector(mgr, port->connector);
+
+		drm_dp_port_teardown_pdt(port, port->pdt);
+
+		if (!port->input && port->vcpi.vcpi > 0)
+			drm_dp_mst_put_payload_id(mgr, port->vcpi.vcpi);
+		kfree(port);
 	}
 }
 

drivers/gpu/drm/i915/intel_atomic.c

@@ -129,8 +129,9 @@ int intel_atomic_commit(struct drm_device *dev,
 			struct drm_atomic_state *state,
 			bool async)
 {
-	int ret;
-	int i;
+	struct drm_crtc_state *crtc_state;
+	struct drm_crtc *crtc;
+	int ret, i;
 
 	if (async) {
 		DRM_DEBUG_KMS("i915 does not yet support async commit\n");
@@ -142,48 +143,18 @@ int intel_atomic_commit(struct drm_device *dev,
 		return ret;
 
 	/* Point of no return */
-
-	/*
-	 * FIXME:  The proper sequence here will eventually be:
-	 *
-	 * drm_atomic_helper_swap_state(dev, state)
-	 * drm_atomic_helper_commit_modeset_disables(dev, state);
-	 * drm_atomic_helper_commit_planes(dev, state);
-	 * drm_atomic_helper_commit_modeset_enables(dev, state);
-	 * drm_atomic_helper_wait_for_vblanks(dev, state);
-	 * drm_atomic_helper_cleanup_planes(dev, state);
-	 * drm_atomic_state_free(state);
-	 *
-	 * once we have full atomic modeset.  For now, just manually update
-	 * plane states to avoid clobbering good states with dummy states
-	 * while nuclear pageflipping.
-	 */
-	for (i = 0; i < dev->mode_config.num_total_plane; i++) {
-		struct drm_plane *plane = state->planes[i];
-
-		if (!plane)
-			continue;
-
-		plane->state->state = state;
-		swap(state->plane_states[i], plane->state);
-		plane->state->state = NULL;
-	}
+	drm_atomic_helper_swap_state(dev, state);
 
 	/* swap crtc_scaler_state */
-	for (i = 0; i < dev->mode_config.num_crtc; i++) {
-		struct drm_crtc *crtc = state->crtcs[i];
-		if (!crtc) {
-			continue;
-		}
-
-		to_intel_crtc(crtc)->config->scaler_state =
-			to_intel_crtc_state(state->crtc_states[i])->scaler_state;
+	for_each_crtc_in_state(state, crtc, crtc_state, i) {
+		to_intel_crtc(crtc)->config = to_intel_crtc_state(crtc->state);
 
 		if (INTEL_INFO(dev)->gen >= 9)
 			skl_detach_scalers(to_intel_crtc(crtc));
+
+		drm_atomic_helper_commit_planes_on_crtc(crtc_state);
 	}
 
-	drm_atomic_helper_commit_planes(dev, state);
 	drm_atomic_helper_wait_for_vblanks(dev, state);
 	drm_atomic_helper_cleanup_planes(dev, state);
 	drm_atomic_state_free(state);

drivers/gpu/drm/i915/intel_display.c

@@ -11826,7 +11826,9 @@ encoder_retry:
 		goto encoder_retry;
 	}
 
-	pipe_config->dither = pipe_config->pipe_bpp != base_bpp;
+	/* Dithering seems to not pass-through bits correctly when it should, so
+	 * only enable it on 6bpc panels. */
+	pipe_config->dither = pipe_config->pipe_bpp == 6*3;
 	DRM_DEBUG_KMS("plane bpp: %i, pipe bpp: %i, dithering: %i\n",
 		      base_bpp, pipe_config->pipe_bpp, pipe_config->dither);
 
@@ -12624,17 +12626,17 @@ static int __intel_set_mode(struct drm_crtc *modeset_crtc,
 
 	modeset_update_crtc_power_domains(state);
 
-	drm_atomic_helper_commit_planes(dev, state);
-
 	/* Now enable the clocks, plane, pipe, and connectors that we set up. */
 	for_each_crtc_in_state(state, crtc, crtc_state, i) {
-		if (!needs_modeset(crtc->state) || !crtc->state->enable)
+		if (!needs_modeset(crtc->state) || !crtc->state->enable) {
+			drm_atomic_helper_commit_planes_on_crtc(crtc_state);
 			continue;
+		}
 
 		update_scanline_offset(to_intel_crtc(crtc));
 
 		dev_priv->display.crtc_enable(crtc);
-		intel_crtc_enable_planes(crtc);
+		drm_atomic_helper_commit_planes_on_crtc(crtc_state);
 	}
 
 	/* FIXME: add subpixel order */
@@ -12891,20 +12893,11 @@ intel_modeset_stage_output_state(struct drm_device *dev,
 	return 0;
 }
 
-static bool primary_plane_visible(struct drm_crtc *crtc)
-{
-	struct intel_plane_state *plane_state =
-		to_intel_plane_state(crtc->primary->state);
-
-	return plane_state->visible;
-}
-
 static int intel_crtc_set_config(struct drm_mode_set *set)
 {
 	struct drm_device *dev;
 	struct drm_atomic_state *state = NULL;
 	struct intel_crtc_state *pipe_config;
-	bool primary_plane_was_visible;
 	int ret;
 
 	BUG_ON(!set);
@@ -12943,38 +12936,8 @@ static int intel_crtc_set_config(struct drm_mode_set *set)
 
 	intel_update_pipe_size(to_intel_crtc(set->crtc));
 
-	primary_plane_was_visible = primary_plane_visible(set->crtc);
-
 	ret = intel_set_mode_with_config(set->crtc, pipe_config, true);
 
-	if (ret == 0 &&
-	    pipe_config->base.enable &&
-	    pipe_config->base.planes_changed &&
-	    !needs_modeset(&pipe_config->base)) {
-		struct intel_crtc *intel_crtc = to_intel_crtc(set->crtc);
-
-		/*
-		 * We need to make sure the primary plane is re-enabled if it
-		 * has previously been turned off.
-		 */
-		if (ret == 0 && !primary_plane_was_visible &&
-		    primary_plane_visible(set->crtc)) {
-			WARN_ON(!intel_crtc->active);
-			intel_post_enable_primary(set->crtc);
-		}
-
-		/*
-		 * In the fastboot case this may be our only check of the
-		 * state after boot.  It would be better to only do it on
-		 * the first update, but we don't have a nice way of doing that
-		 * (and really, set_config isn't used much for high freq page
-		 * flipping, so increasing its cost here shouldn't be a big
-		 * deal).
-		 */
-		if (i915.fastboot && ret == 0)
-			intel_modeset_check_state(set->crtc->dev);
-	}
-
 	if (ret) {
 		DRM_DEBUG_KMS("failed to set mode on [CRTC:%d], err = %d\n",
 			      set->crtc->base.id, ret);
@@ -13305,6 +13268,9 @@ intel_check_primary_plane(struct drm_plane *plane,
 			 */
 			if (IS_BROADWELL(dev))
 				intel_crtc->atomic.wait_vblank = true;
+
+			if (crtc_state)
+				intel_crtc->atomic.post_enable_primary = true;
 		}
 
 		/*
@@ -13317,6 +13283,10 @@ intel_check_primary_plane(struct drm_plane *plane,
 		if (!state->visible || !fb)
 			intel_crtc->atomic.disable_ips = true;
 
+		if (!state->visible && old_state->visible &&
+		    crtc_state && !needs_modeset(&crtc_state->base))
+			intel_crtc->atomic.pre_disable_primary = true;
+
 		intel_crtc->atomic.fb_bits |=
 			INTEL_FRONTBUFFER_PRIMARY(intel_crtc->pipe);
 
@@ -15034,6 +15004,7 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
 		struct intel_plane_state *plane_state;
 
 		memset(crtc->config, 0, sizeof(*crtc->config));
+		crtc->config->base.crtc = &crtc->base;
 
 		crtc->config->quirks |= PIPE_CONFIG_QUIRK_INHERITED_MODE;
 

drivers/infiniband/hw/cxgb4/cq.c

@@ -814,7 +814,7 @@ static int c4iw_poll_cq_one(struct c4iw_cq *chp, struct ib_wc *wc)
 			printk(KERN_ERR MOD
 			       "Unexpected cqe_status 0x%x for QPID=0x%0x\n",
 			       CQE_STATUS(&cqe), CQE_QPID(&cqe));
-			ret = -EINVAL;
+			wc->status = IB_WC_FATAL_ERR;
 		}
 	}
 out:

drivers/scsi/scsi_error.c

@@ -26,7 +26,6 @@
 #include <linux/blkdev.h>
 #include <linux/delay.h>
 #include <linux/jiffies.h>
-#include <asm/unaligned.h>
 
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
@@ -2523,33 +2522,3 @@ void scsi_build_sense_buffer(int desc, u8 *buf, u8 key, u8 asc, u8 ascq)
 	}
 }
 EXPORT_SYMBOL(scsi_build_sense_buffer);
-
-/**
- * scsi_set_sense_information - set the information field in a
- *		formatted sense data buffer
- * @buf:	Where to build sense data
- * @info:	64-bit information value to be set
- *
- **/
-void scsi_set_sense_information(u8 *buf, u64 info)
-{
-	if ((buf[0] & 0x7f) == 0x72) {
-		u8 *ucp, len;
-
-		len = buf[7];
-		ucp = (char *)scsi_sense_desc_find(buf, len + 8, 0);
-		if (!ucp) {
-			buf[7] = len + 0xa;
-			ucp = buf + 8 + len;
-		}
-		ucp[0] = 0;
-		ucp[1] = 0xa;
-		ucp[2] = 0x80; /* Valid bit */
-		ucp[3] = 0;
-		put_unaligned_be64(info, &ucp[4]);
-	} else if ((buf[0] & 0x7f) == 0x70) {
-		buf[0] |= 0x80;
-		put_unaligned_be64(info, &buf[3]);
-	}
-}
-EXPORT_SYMBOL(scsi_set_sense_information);

drivers/target/iscsi/iscsi_target.c

@@ -968,9 +968,9 @@ int iscsit_setup_scsi_cmd(struct iscsi_conn *conn, struct iscsi_cmd *cmd,
 		cmd->cmd_flags |= ICF_NON_IMMEDIATE_UNSOLICITED_DATA;
 
 	conn->sess->init_task_tag = cmd->init_task_tag = hdr->itt;
-	if (hdr->flags & ISCSI_FLAG_CMD_READ) {
+	if (hdr->flags & ISCSI_FLAG_CMD_READ)
 		cmd->targ_xfer_tag = session_get_next_ttt(conn->sess);
-	} else if (hdr->flags & ISCSI_FLAG_CMD_WRITE)
+	else
 		cmd->targ_xfer_tag = 0xFFFFFFFF;
 	cmd->cmd_sn		= be32_to_cpu(hdr->cmdsn);
 	cmd->exp_stat_sn	= be32_to_cpu(hdr->exp_statsn);

drivers/target/target_core_configfs.c

@@ -457,8 +457,15 @@ void target_unregister_template(const struct target_core_fabric_ops *fo)
 		if (!strcmp(t->tf_ops->name, fo->name)) {
 			BUG_ON(atomic_read(&t->tf_access_cnt));
 			list_del(&t->tf_list);
+			mutex_unlock(&g_tf_lock);
+			/*
+			 * Wait for any outstanding fabric se_deve_entry->rcu_head
+			 * callbacks to complete post kfree_rcu(), before allowing
+			 * fabric driver unload of TFO->module to proceed.
+			 */
+			rcu_barrier();
 			kfree(t);
-			break;
+			return;
 		}
 	}
 	mutex_unlock(&g_tf_lock);

drivers/target/target_core_hba.c

@@ -84,8 +84,16 @@ void target_backend_unregister(const struct target_backend_ops *ops)
 	list_for_each_entry(tb, &backend_list, list) {
 		if (tb->ops == ops) {
 			list_del(&tb->list);
+			mutex_unlock(&backend_mutex);
+			/*
+			 * Wait for any outstanding backend driver ->rcu_head
+			 * callbacks to complete post TBO->free_device() ->
+			 * call_rcu(), before allowing backend driver module
+			 * unload of target_backend_ops->owner to proceed.
+			 */
+			rcu_barrier();
 			kfree(tb);
-			break;
+			return;
 		}
 	}
 	mutex_unlock(&backend_mutex);

drivers/target/target_core_spc.c

@@ -1203,17 +1203,13 @@ sense_reason_t spc_emulate_report_luns(struct se_cmd *cmd)
 	struct se_dev_entry *deve;
 	struct se_session *sess = cmd->se_sess;
 	struct se_node_acl *nacl;
+	struct scsi_lun slun;
 	unsigned char *buf;
 	u32 lun_count = 0, offset = 8;
-
-	if (cmd->data_length < 16) {
-		pr_warn("REPORT LUNS allocation length %u too small\n",
-			cmd->data_length);
-		return TCM_INVALID_CDB_FIELD;
-	}
+	__be32 len;
 
 	buf = transport_kmap_data_sg(cmd);
-	if (!buf)
+	if (cmd->data_length && !buf)
 		return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
 
 	/*
@@ -1221,11 +1217,9 @@ sense_reason_t spc_emulate_report_luns(struct se_cmd *cmd)
 	 * coming via a target_core_mod PASSTHROUGH op, and not through
 	 * a $FABRIC_MOD.  In that case, report LUN=0 only.
 	 */
-	if (!sess) {
-		int_to_scsilun(0, (struct scsi_lun *)&buf[offset]);
-		lun_count = 1;
+	if (!sess)
 		goto done;
-	}
+
 	nacl = sess->se_node_acl;
 
 	rcu_read_lock();
@@ -1236,10 +1230,12 @@ sense_reason_t spc_emulate_report_luns(struct se_cmd *cmd)
 		 * See SPC2-R20 7.19.
 		 */
 		lun_count++;
-		if ((offset + 8) > cmd->data_length)
+		if (offset >= cmd->data_length)
 			continue;
 
-		int_to_scsilun(deve->mapped_lun, (struct scsi_lun *)&buf[offset]);
+		int_to_scsilun(deve->mapped_lun, &slun);
+		memcpy(buf + offset, &slun,
+		       min(8u, cmd->data_length - offset));
 		offset += 8;
 	}
 	rcu_read_unlock();
@@ -1248,12 +1244,22 @@ sense_reason_t spc_emulate_report_luns(struct se_cmd *cmd)
 	 * See SPC3 r07, page 159.
 	 */
 done:
-	lun_count *= 8;
-	buf[0] = ((lun_count >> 24) & 0xff);
-	buf[1] = ((lun_count >> 16) & 0xff);
-	buf[2] = ((lun_count >> 8) & 0xff);
-	buf[3] = (lun_count & 0xff);
-	transport_kunmap_data_sg(cmd);
+	/*
+	 * If no LUNs are accessible, report virtual LUN 0.
+	 */
+	if (lun_count == 0) {
+		int_to_scsilun(0, &slun);
+		if (cmd->data_length > 8)
+			memcpy(buf + offset, &slun,
+			       min(8u, cmd->data_length - offset));
+		lun_count = 1;
+	}
+
+	if (buf) {
+		len = cpu_to_be32(lun_count * 8);
+		memcpy(buf, &len, min_t(int, sizeof len, cmd->data_length));
+		transport_kunmap_data_sg(cmd);
+	}
 
 	target_complete_cmd_with_length(cmd, GOOD, 8 + lun_count * 8);
 	return 0;

drivers/thermal/cpu_cooling.c

@@ -68,7 +68,7 @@ struct power_table {
  *	registered cooling device.
  * @cpufreq_state: integer value representing the current state of cpufreq
  *	cooling	devices.
- * @cpufreq_val: integer value representing the absolute value of the clipped
+ * @clipped_freq: integer value representing the absolute value of the clipped
  *	frequency.
  * @max_level: maximum cooling level. One less than total number of valid
  *	cpufreq frequencies.
@@ -91,7 +91,7 @@ struct cpufreq_cooling_device {
 	int id;
 	struct thermal_cooling_device *cool_dev;
 	unsigned int cpufreq_state;
-	unsigned int cpufreq_val;
+	unsigned int clipped_freq;
 	unsigned int max_level;
 	unsigned int *freq_table;	/* In descending order */
 	struct cpumask allowed_cpus;
@@ -107,6 +107,9 @@ struct cpufreq_cooling_device {
 static DEFINE_IDR(cpufreq_idr);
 static DEFINE_MUTEX(cooling_cpufreq_lock);
 
+static unsigned int cpufreq_dev_count;
+
+static DEFINE_MUTEX(cooling_list_lock);
 static LIST_HEAD(cpufreq_dev_list);
 
 /**
@@ -185,14 +188,14 @@ unsigned long cpufreq_cooling_get_level(unsigned int cpu, unsigned int freq)
 {
 	struct cpufreq_cooling_device *cpufreq_dev;
 
-	mutex_lock(&cooling_cpufreq_lock);
+	mutex_lock(&cooling_list_lock);
 	list_for_each_entry(cpufreq_dev, &cpufreq_dev_list, node) {
 		if (cpumask_test_cpu(cpu, &cpufreq_dev->allowed_cpus)) {
-			mutex_unlock(&cooling_cpufreq_lock);
+			mutex_unlock(&cooling_list_lock);
 			return get_level(cpufreq_dev, freq);
 		}
 	}
-	mutex_unlock(&cooling_cpufreq_lock);
+	mutex_unlock(&cooling_list_lock);
 
 	pr_err("%s: cpu:%d not part of any cooling device\n", __func__, cpu);
 	return THERMAL_CSTATE_INVALID;
@@ -215,29 +218,35 @@ static int cpufreq_thermal_notifier(struct notifier_block *nb,
 				    unsigned long event, void *data)
 {
 	struct cpufreq_policy *policy = data;
-	unsigned long max_freq = 0;
+	unsigned long clipped_freq;
 	struct cpufreq_cooling_device *cpufreq_dev;
 
-	switch (event) {
+	if (event != CPUFREQ_ADJUST)
+		return NOTIFY_DONE;
 
-	case CPUFREQ_ADJUST:
-		mutex_lock(&cooling_cpufreq_lock);
-		list_for_each_entry(cpufreq_dev, &cpufreq_dev_list, node) {
-			if (!cpumask_test_cpu(policy->cpu,
-					      &cpufreq_dev->allowed_cpus))
-				continue;
+	mutex_lock(&cooling_list_lock);
+	list_for_each_entry(cpufreq_dev, &cpufreq_dev_list, node) {
+		if (!cpumask_test_cpu(policy->cpu, &cpufreq_dev->allowed_cpus))
+			continue;
 
-			max_freq = cpufreq_dev->cpufreq_val;
+		/*
+		 * policy->max is the maximum allowed frequency defined by user
+		 * and clipped_freq is the maximum that thermal constraints
+		 * allow.
+		 *
+		 * If clipped_freq is lower than policy->max, then we need to
+		 * readjust policy->max.
+		 *
+		 * But, if clipped_freq is greater than policy->max, we don't
+		 * need to do anything.
+		 */
+		clipped_freq = cpufreq_dev->clipped_freq;
 
-			if (policy->max != max_freq)
-				cpufreq_verify_within_limits(policy, 0,
-							     max_freq);
-		}
-		mutex_unlock(&cooling_cpufreq_lock);
+		if (policy->max > clipped_freq)
+			cpufreq_verify_within_limits(policy, 0, clipped_freq);
 		break;
-	default:
-		return NOTIFY_DONE;
 	}
+	mutex_unlock(&cooling_list_lock);
 
 	return NOTIFY_OK;
 }
@@ -519,7 +528,7 @@ static int cpufreq_set_cur_state(struct thermal_cooling_device *cdev,
 
 	clip_freq = cpufreq_device->freq_table[state];
 	cpufreq_device->cpufreq_state = state;
-	cpufreq_device->cpufreq_val = clip_freq;
+	cpufreq_device->clipped_freq = clip_freq;
 
 	cpufreq_update_policy(cpu);
 
@@ -861,17 +870,19 @@ __cpufreq_cooling_register(struct device_node *np,
 			pr_debug("%s: freq:%u KHz\n", __func__, freq);
 	}
 
-	cpufreq_dev->cpufreq_val = cpufreq_dev->freq_table[0];
+	cpufreq_dev->clipped_freq = cpufreq_dev->freq_table[0];
 	cpufreq_dev->cool_dev = cool_dev;
 
 	mutex_lock(&cooling_cpufreq_lock);
 
+	mutex_lock(&cooling_list_lock);
+	list_add(&cpufreq_dev->node, &cpufreq_dev_list);
+	mutex_unlock(&cooling_list_lock);
+
 	/* Register the notifier for first cpufreq cooling device */
-	if (list_empty(&cpufreq_dev_list))
+	if (!cpufreq_dev_count++)
 		cpufreq_register_notifier(&thermal_cpufreq_notifier_block,
 					  CPUFREQ_POLICY_NOTIFIER);
-	list_add(&cpufreq_dev->node, &cpufreq_dev_list);
-
 	mutex_unlock(&cooling_cpufreq_lock);
 
 	return cool_dev;
@@ -1013,13 +1024,17 @@ void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev)
 		return;
 
 	cpufreq_dev = cdev->devdata;
-	mutex_lock(&cooling_cpufreq_lock);
-	list_del(&cpufreq_dev->node);
 
 	/* Unregister the notifier for the last cpufreq cooling device */
-	if (list_empty(&cpufreq_dev_list))
+	mutex_lock(&cooling_cpufreq_lock);
+	if (!--cpufreq_dev_count)
 		cpufreq_unregister_notifier(&thermal_cpufreq_notifier_block,
 					    CPUFREQ_POLICY_NOTIFIER);
+
+	mutex_lock(&cooling_list_lock);
+	list_del(&cpufreq_dev->node);
+	mutex_unlock(&cooling_list_lock);
+
 	mutex_unlock(&cooling_cpufreq_lock);
 
 	thermal_cooling_device_unregister(cpufreq_dev->cool_dev);

drivers/thermal/power_allocator.c

@@ -334,7 +334,7 @@ static int allocate_power(struct thermal_zone_device *tz,
 				      max_allocatable_power, current_temp,
 				      (s32)control_temp - (s32)current_temp);
 
-	devm_kfree(&tz->device, req_power);
+	kfree(req_power);
 unlock:
 	mutex_unlock(&tz->lock);
 
@@ -426,7 +426,7 @@ static int power_allocator_bind(struct thermal_zone_device *tz)
 		return -EINVAL;
 	}
 
-	params = devm_kzalloc(&tz->device, sizeof(*params), GFP_KERNEL);
+	params = kzalloc(sizeof(*params), GFP_KERNEL);
 	if (!params)
 		return -ENOMEM;
 
@@ -468,14 +468,14 @@ static int power_allocator_bind(struct thermal_zone_device *tz)
 	return 0;
 
 free:
-	devm_kfree(&tz->device, params);
+	kfree(params);
 	return ret;
 }
 
 static void power_allocator_unbind(struct thermal_zone_device *tz)
 {
 	dev_dbg(&tz->device, "Unbinding from thermal zone %d\n", tz->id);
-	devm_kfree(&tz->device, tz->governor_data);
+	kfree(tz->governor_data);
 	tz->governor_data = NULL;
 }
 

include/drm/drm_crtc.h

@@ -743,8 +743,6 @@ struct drm_connector {
 	uint8_t num_h_tile, num_v_tile;
 	uint8_t tile_h_loc, tile_v_loc;
 	uint16_t tile_h_size, tile_v_size;
-
-	struct list_head destroy_list;
 };
 
 /**

include/linux/ata.h

@@ -385,8 +385,6 @@ enum {
 	SATA_SSP		= 0x06,	/* Software Settings Preservation */
 	SATA_DEVSLP		= 0x09,	/* Device Sleep */
 
-	SETFEATURE_SENSE_DATA = 0xC3, /* Sense Data Reporting feature */
-
 	/* feature values for SET_MAX */
 	ATA_SET_MAX_ADDR	= 0x00,
 	ATA_SET_MAX_PASSWD	= 0x01,
@@ -530,8 +528,6 @@ struct ata_bmdma_prd {
 #define ata_id_cdb_intr(id)	(((id)[ATA_ID_CONFIG] & 0x60) == 0x20)
 #define ata_id_has_da(id)	((id)[ATA_ID_SATA_CAPABILITY_2] & (1 << 4))
 #define ata_id_has_devslp(id)	((id)[ATA_ID_FEATURE_SUPP] & (1 << 8))
-#define ata_id_has_ncq_autosense(id) \
-				((id)[ATA_ID_FEATURE_SUPP] & (1 << 7))
 
 static inline bool ata_id_has_hipm(const u16 *id)
 {
@@ -720,20 +716,6 @@ static inline bool ata_id_has_read_log_dma_ext(const u16 *id)
 	return false;
 }
 
-static inline bool ata_id_has_sense_reporting(const u16 *id)
-{
-	if (!(id[ATA_ID_CFS_ENABLE_2] & (1 << 15)))
-		return false;
-	return id[ATA_ID_COMMAND_SET_3] & (1 << 6);
-}
-
-static inline bool ata_id_sense_reporting_enabled(const u16 *id)
-{
-	if (!(id[ATA_ID_CFS_ENABLE_2] & (1 << 15)))
-		return false;
-	return id[ATA_ID_COMMAND_SET_4] & (1 << 6);
-}
-
 /**
  *	ata_id_major_version	-	get ATA level of drive
  *	@id: Identify data

include/scsi/scsi_eh.h

@@ -28,7 +28,6 @@ extern int scsi_get_sense_info_fld(const u8 * sense_buffer, int sb_len,
 				   u64 * info_out);
 
 extern void scsi_build_sense_buffer(int desc, u8 *buf, u8 key, u8 asc, u8 ascq);
-extern void scsi_set_sense_information(u8 *buf, u64 info);
 
 extern int scsi_ioctl_reset(struct scsi_device *, int __user *);
 

kernel/cpuset.c

@@ -1223,7 +1223,7 @@ static int update_nodemask(struct cpuset *cs, struct cpuset *trialcs,
 	spin_unlock_irq(&callback_lock);
 
 	/* use trialcs->mems_allowed as a temp variable */
-	update_nodemasks_hier(cs, &cs->mems_allowed);
+	update_nodemasks_hier(cs, &trialcs->mems_allowed);
 done:
 	return retval;
 }